powerpc/eeh: Emulate EEH recovery for VFIO devices
authorGavin Shan <gwshan@linux.vnet.ibm.com>
Tue, 30 Sep 2014 02:39:07 +0000 (12:39 +1000)
committerMichael Ellerman <mpe@ellerman.id.au>
Tue, 30 Sep 2014 07:15:18 +0000 (17:15 +1000)
When enabling EEH functionality on passed through devices (PE)
with VFIO, the devices in the PE would be removed permanently
from guest side. In that case, the PE remains frozen state.
When returning PE to host, or restarting the guest again, we
had mechanism unfreezing the PE by clearing PESTA/B frozen
bits. However, that's not enough for some adapters, which are
indicated as following "lspci" shows. Those adapters require
hot reset on the parent bus to bring their firmware back to
workable state. Otherwise, those adaptrs won't be operative
and the host (for returning case) or the guest will fail to
load the drivers for those adapters without exception.

0000:01:00.0 Ethernet controller: Emulex Corporation OneConnect \
             10Gb NIC (be3) (rev 02)
0000:01:00.0 0200: 19a2:0710 (rev 02)
0001:03:00.0 Ethernet controller: Emulex Corporation OneConnect \
             NIC (Lancer) (rev 10)
0001:03:00.0 0200: 10df:e220 (rev 10)

The patch adds mechanism to emulate EEH recovery (for hot reset
on parent PCI bus) on 3 gates to fix the issue: open/release one
adapter of the PE, enable EEH functionality on one adapter of the
PE.

Reported-by: Murilo Fossa Vicentini <muvic@br.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
arch/powerpc/include/asm/eeh.h
arch/powerpc/kernel/eeh.c
arch/powerpc/kernel/eeh_driver.c

index b793fdfb37f373a5e77d74d8377a5ff8f5155ebe..3b260efbfbf9833a5d23263b64f50c833564b74a 100644 (file)
@@ -287,6 +287,7 @@ void eeh_add_device_tree_late(struct pci_bus *);
 void eeh_add_sysfs_files(struct pci_bus *);
 void eeh_remove_device(struct pci_dev *);
 int eeh_unfreeze_pe(struct eeh_pe *pe, bool sw_state);
+int eeh_pe_reset_and_recover(struct eeh_pe *pe);
 int eeh_dev_open(struct pci_dev *pdev);
 void eeh_dev_release(struct pci_dev *pdev);
 struct eeh_pe *eeh_iommu_group_to_pe(struct iommu_group *group);
index 6936908277859ab774e6e549f19d9ec10c3aaa84..3350b8490dbcbac1751bb46baf9d9b6cdc3cb65b 100644 (file)
@@ -1193,6 +1193,60 @@ int eeh_unfreeze_pe(struct eeh_pe *pe, bool sw_state)
        return ret;
 }
 
+
+static struct pci_device_id eeh_reset_ids[] = {
+       { PCI_DEVICE(0x19a2, 0x0710) }, /* Emulex, BE     */
+       { PCI_DEVICE(0x10df, 0xe220) }, /* Emulex, Lancer */
+       { 0 }
+};
+
+static int eeh_pe_change_owner(struct eeh_pe *pe)
+{
+       struct eeh_dev *edev, *tmp;
+       struct pci_dev *pdev;
+       struct pci_device_id *id;
+       int flags, ret;
+
+       /* Check PE state */
+       flags = (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE);
+       ret = eeh_ops->get_state(pe, NULL);
+       if (ret < 0 || ret == EEH_STATE_NOT_SUPPORT)
+               return 0;
+
+       /* Unfrozen PE, nothing to do */
+       if ((ret & flags) == flags)
+               return 0;
+
+       /* Frozen PE, check if it needs PE level reset */
+       eeh_pe_for_each_dev(pe, edev, tmp) {
+               pdev = eeh_dev_to_pci_dev(edev);
+               if (!pdev)
+                       continue;
+
+               for (id = &eeh_reset_ids[0]; id->vendor != 0; id++) {
+                       if (id->vendor != PCI_ANY_ID &&
+                           id->vendor != pdev->vendor)
+                               continue;
+                       if (id->device != PCI_ANY_ID &&
+                           id->device != pdev->device)
+                               continue;
+                       if (id->subvendor != PCI_ANY_ID &&
+                           id->subvendor != pdev->subsystem_vendor)
+                               continue;
+                       if (id->subdevice != PCI_ANY_ID &&
+                           id->subdevice != pdev->subsystem_device)
+                               continue;
+
+                       goto reset;
+               }
+       }
+
+       return eeh_unfreeze_pe(pe, true);
+
+reset:
+       return eeh_pe_reset_and_recover(pe);
+}
+
 /**
  * eeh_dev_open - Increase count of pass through devices for PE
  * @pdev: PCI device
@@ -1224,7 +1278,7 @@ int eeh_dev_open(struct pci_dev *pdev)
         * in frozen PE won't work properly. Clear the frozen state
         * in advance.
         */
-       ret = eeh_unfreeze_pe(edev->pe, true);
+       ret = eeh_pe_change_owner(edev->pe);
        if (ret)
                goto out;
 
@@ -1265,6 +1319,7 @@ void eeh_dev_release(struct pci_dev *pdev)
        /* Decrease PE's pass through count */
        atomic_dec(&edev->pe->pass_dev_cnt);
        WARN_ON(atomic_read(&edev->pe->pass_dev_cnt) < 0);
+       eeh_pe_change_owner(edev->pe);
 out:
        mutex_unlock(&eeh_dev_mutex);
 }
@@ -1345,7 +1400,7 @@ int eeh_pe_set_option(struct eeh_pe *pe, int option)
        switch (option) {
        case EEH_OPT_ENABLE:
                if (eeh_enabled()) {
-                       ret = eeh_unfreeze_pe(pe, true);
+                       ret = eeh_pe_change_owner(pe);
                        break;
                }
                ret = -EIO;
index 948e6f99089f654a024bddd4d6ed84264d7b1a75..3fd514f8e4b2a8e300b87171378185260dc901b3 100644 (file)
@@ -180,6 +180,22 @@ static bool eeh_dev_removed(struct eeh_dev *edev)
        return false;
 }
 
+static void *eeh_dev_save_state(void *data, void *userdata)
+{
+       struct eeh_dev *edev = data;
+       struct pci_dev *pdev;
+
+       if (!edev)
+               return NULL;
+
+       pdev = eeh_dev_to_pci_dev(edev);
+       if (!pdev)
+               return NULL;
+
+       pci_save_state(pdev);
+       return NULL;
+}
+
 /**
  * eeh_report_error - Report pci error to each device driver
  * @data: eeh device
@@ -303,6 +319,22 @@ static void *eeh_report_reset(void *data, void *userdata)
        return NULL;
 }
 
+static void *eeh_dev_restore_state(void *data, void *userdata)
+{
+       struct eeh_dev *edev = data;
+       struct pci_dev *pdev;
+
+       if (!edev)
+               return NULL;
+
+       pdev = eeh_dev_to_pci_dev(edev);
+       if (!pdev)
+               return NULL;
+
+       pci_restore_state(pdev);
+       return NULL;
+}
+
 /**
  * eeh_report_resume - Tell device to resume normal operations
  * @data: eeh device
@@ -450,10 +482,11 @@ static void *eeh_pe_detach_dev(void *data, void *userdata)
 static void *__eeh_clear_pe_frozen_state(void *data, void *flag)
 {
        struct eeh_pe *pe = (struct eeh_pe *)data;
+       bool *clear_sw_state = flag;
        int i, rc = 1;
 
        for (i = 0; rc && i < 3; i++)
-               rc = eeh_unfreeze_pe(pe, false);
+               rc = eeh_unfreeze_pe(pe, clear_sw_state);
 
        /* Stop immediately on any errors */
        if (rc) {
@@ -465,17 +498,66 @@ static void *__eeh_clear_pe_frozen_state(void *data, void *flag)
        return NULL;
 }
 
-static int eeh_clear_pe_frozen_state(struct eeh_pe *pe)
+static int eeh_clear_pe_frozen_state(struct eeh_pe *pe,
+                                    bool clear_sw_state)
 {
        void *rc;
 
-       rc = eeh_pe_traverse(pe, __eeh_clear_pe_frozen_state, NULL);
+       rc = eeh_pe_traverse(pe, __eeh_clear_pe_frozen_state, &clear_sw_state);
        if (!rc)
                eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
 
        return rc ? -EIO : 0;
 }
 
+int eeh_pe_reset_and_recover(struct eeh_pe *pe)
+{
+       int result, ret;
+
+       /* Bail if the PE is being recovered */
+       if (pe->state & EEH_PE_RECOVERING)
+               return 0;
+
+       /* Put the PE into recovery mode */
+       eeh_pe_state_mark(pe, EEH_PE_RECOVERING);
+
+       /* Save states */
+       eeh_pe_dev_traverse(pe, eeh_dev_save_state, NULL);
+
+       /* Report error */
+       eeh_pe_dev_traverse(pe, eeh_report_error, &result);
+
+       /* Issue reset */
+       eeh_pe_state_mark(pe, EEH_PE_RESET);
+       ret = eeh_reset_pe(pe);
+       if (ret) {
+               eeh_pe_state_clear(pe, EEH_PE_RECOVERING | EEH_PE_RESET);
+               return ret;
+       }
+       eeh_pe_state_clear(pe, EEH_PE_RESET);
+
+       /* Unfreeze the PE */
+       ret = eeh_clear_pe_frozen_state(pe, true);
+       if (ret) {
+               eeh_pe_state_clear(pe, EEH_PE_RECOVERING);
+               return ret;
+       }
+
+       /* Notify completion of reset */
+       eeh_pe_dev_traverse(pe, eeh_report_reset, &result);
+
+       /* Restore device state */
+       eeh_pe_dev_traverse(pe, eeh_dev_restore_state, NULL);
+
+       /* Resume */
+       eeh_pe_dev_traverse(pe, eeh_report_resume, NULL);
+
+       /* Clear recovery mode */
+       eeh_pe_state_clear(pe, EEH_PE_RECOVERING);
+
+       return 0;
+}
+
 /**
  * eeh_reset_device - Perform actual reset of a pci slot
  * @pe: EEH PE
@@ -534,7 +616,7 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
        eeh_pe_state_clear(pe, EEH_PE_RESET);
 
        /* Clear frozen state */
-       rc = eeh_clear_pe_frozen_state(pe);
+       rc = eeh_clear_pe_frozen_state(pe, false);
        if (rc)
                return rc;