data->length = prism2_ap_get_sta_qual(local, addr, qual, IW_MAX_AP, 1);
- memcpy(extra, &addr, sizeof(struct sockaddr) * data->length);
+ memcpy(extra, addr, sizeof(struct sockaddr) * data->length);
data->flags = 1; /* has quality information */
- memcpy(extra + sizeof(struct sockaddr) * data->length, &qual,
+ memcpy(extra + sizeof(struct sockaddr) * data->length, qual,
sizeof(struct iw_quality) * data->length);
kfree(addr);
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
- if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
+ if (!test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
+ return;
+
+ if (ctx->vif)
ieee80211_chswitch_done(ctx->vif, is_success);
}
#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800)
-#define APMG_RTC_INT_STT_RFKILL (0x10000000)
-
/* Device system time */
#define DEVICE_SYSTEM_TIME_REG 0xA0206C
schedule_work(&mvm->roc_done_wk);
}
+static bool iwl_mvm_te_check_disconnect(struct iwl_mvm *mvm,
+ struct ieee80211_vif *vif,
+ const char *errmsg)
+{
+ if (vif->type != NL80211_IFTYPE_STATION)
+ return false;
+ if (vif->bss_conf.assoc && vif->bss_conf.dtim_period)
+ return false;
+ if (errmsg)
+ IWL_ERR(mvm, "%s\n", errmsg);
+ ieee80211_connection_loss(vif);
+ return true;
+}
+
/*
* Handles a FW notification for an event that is known to the driver.
*
* P2P Device discoveribility, while there are other higher priority
* events in the system).
*/
- WARN_ONCE(!le32_to_cpu(notif->status),
- "Failed to schedule time event\n");
+ if (WARN_ONCE(!le32_to_cpu(notif->status),
+ "Failed to schedule time event\n")) {
+ if (iwl_mvm_te_check_disconnect(mvm, te_data->vif, NULL)) {
+ iwl_mvm_te_clear_data(mvm, te_data);
+ return;
+ }
+ }
if (le32_to_cpu(notif->action) & TE_NOTIF_HOST_EVENT_END) {
IWL_DEBUG_TE(mvm,
* By now, we should have finished association
* and know the dtim period.
*/
- if (te_data->vif->type == NL80211_IFTYPE_STATION &&
- (!te_data->vif->bss_conf.assoc ||
- !te_data->vif->bss_conf.dtim_period)) {
- IWL_ERR(mvm,
- "No assocation and the time event is over already...\n");
- ieee80211_connection_loss(te_data->vif);
- }
-
+ iwl_mvm_te_check_disconnect(mvm, te_data->vif,
+ "No assocation and the time event is over already...");
iwl_mvm_te_clear_data(mvm, te_data);
} else if (le32_to_cpu(notif->action) & TE_NOTIF_HOST_EVENT_START) {
te_data->running = true;
iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
if (hw_rfkill) {
- /*
- * Clear the interrupt in APMG if the NIC is going down.
- * Note that when the NIC exits RFkill (else branch), we
- * can't access prph and the NIC will be reset in
- * start_hw anyway.
- */
- iwl_write_prph(trans, APMG_RTC_INT_STT_REG,
- APMG_RTC_INT_STT_RFKILL);
set_bit(STATUS_RFKILL, &trans_pcie->status);
if (test_and_clear_bit(STATUS_HCMD_ACTIVE,
&trans_pcie->status))
spin_lock_init(&trans_pcie->reg_lock);
init_waitqueue_head(&trans_pcie->ucode_write_waitq);
- /* W/A - seems to solve weird behavior. We need to remove this if we
- * don't want to stay in L1 all the time. This wastes a lot of power */
- pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
- PCIE_LINK_STATE_CLKPM);
-
if (pci_enable_device(pdev)) {
err = -ENODEV;
goto out_no_pci;
}
+ /* W/A - seems to solve weird behavior. We need to remove this if we
+ * don't want to stay in L1 all the time. This wastes a lot of power */
+ pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
+ PCIE_LINK_STATE_CLKPM);
+
pci_set_master(pdev);
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
goto exit;
err = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 0x4,
- USB_DIR_IN | 0x40, 0,0, &ret, sizeof(ret), ZD1201_FW_TIMEOUT);
+ USB_DIR_IN | 0x40, 0, 0, buf, sizeof(ret), ZD1201_FW_TIMEOUT);
if (err < 0)
goto exit;
+ memcpy(&ret, buf, sizeof(ret));
+
if (ret & 0x80) {
err = -EIO;
goto exit;
hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0,
NL80211_CMD_NEW_KEY);
- if (IS_ERR(hdr))
- return PTR_ERR(hdr);
+ if (!hdr)
+ return -ENOBUFS;
cookie.msg = msg;
cookie.idx = key_idx;
NL80211_CMD_TESTMODE);
struct nlattr *tmdata;
+ if (!hdr)
+ break;
+
if (nla_put_u32(skb, NL80211_ATTR_WIPHY, phy_idx)) {
genlmsg_cancel(skb, hdr);
break;
hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0,
NL80211_CMD_REMAIN_ON_CHANNEL);
-
- if (IS_ERR(hdr)) {
- err = PTR_ERR(hdr);
+ if (!hdr) {
+ err = -ENOBUFS;
goto free_msg;
}
hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0,
NL80211_CMD_FRAME);
-
- if (IS_ERR(hdr)) {
- err = PTR_ERR(hdr);
+ if (!hdr) {
+ err = -ENOBUFS;
goto free_msg;
}
}
hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0,
NL80211_CMD_PROBE_CLIENT);
-
- if (IS_ERR(hdr)) {
- err = PTR_ERR(hdr);
+ if (!hdr) {
+ err = -ENOBUFS;
goto free_msg;
}
struct net_device *dev, u16 reason, bool wextev)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
- int err;
+ int err = 0;
ASSERT_WDEV_LOCK(wdev);
kfree(wdev->connect_keys);
wdev->connect_keys = NULL;
- if (wdev->conn) {
+ if (wdev->conn)
err = cfg80211_sme_disconnect(wdev, reason);
- } else if (!rdev->ops->disconnect) {
+ else if (!rdev->ops->disconnect)
cfg80211_mlme_down(rdev, dev);
- err = 0;
- } else {
+ else if (wdev->current_bss)
err = rdev_disconnect(rdev, dev, reason);
- }
return err;
}