3036: add sdk ,rk88 dts file

diff --git a/arch/arm/boot/dts/rk3036-rk88.dts b/arch/arm/boot/dts/rk3036-rk88.dts
new file mode 100755 (executable)
index 0000000..d7c5174
--- /dev/null
+++ b/arch/arm/boot/dts/rk3036-rk88.dts
@@ -0,0 +1,146 @@
+/dts-v1/;
+
+#include "rk3036.dtsi"
+
+/ {
+
+       fiq-debugger {
+               status = "okay";
+       };
+
+    wireless-wlan {
+        compatible = "wlan-platdata";
+
+        wifi_chip_type = "";
+        sdio_vref = <1800>; //1800mv or 3300mv
+
+        //power_ctrl_by_pmu;
+        //power_pmu_regulator = "act_ldo3";
+        //power_pmu_enable_level = <1>; //1->HIGH, 0->LOW
+
+        //vref_ctrl_enable;
+        //vref_ctrl_gpio = <&gpio0 GPIO_A2 GPIO_ACTIVE_HIGH>;
+        //vref_pmu_regulator = "act_ldo3";
+        //vref_pmu_enable_level = <1>; //1->HIGH, 0->LOW
+
+        //WIFI,poweren_gpio = <&gpio4 GPIO_D4 GPIO_ACTIVE_HIGH>;
+        //WIFI,host_wake_irq = <&gpio4 GPIO_D6 GPIO_ACTIVE_HIGH>;
+        //WIFI,reset_gpio = <&gpio0 GPIO_A2 GPIO_ACTIVE_LOW>;
+
+        status = "okay";
+    };
+
+    wireless-bluetooth {
+        compatible = "bluetooth-platdata";
+
+        //wifi-bt-power-toggle;
+
+        //uart_rts_gpios = <&gpio4 GPIO_C3 GPIO_ACTIVE_LOW>;
+        //pinctrl-names = "default","rts_gpio";
+        //pinctrl-0 = <&uart0_rts>;
+        //pinctrl-1 = <&uart0_rts_gpio>;
+
+        //BT,power_gpio = <&gpio4 GPIO_D3 GPIO_ACTIVE_HIGH>;
+        //BT,reset_gpio = <&gpio4 GPIO_D5 GPIO_ACTIVE_HIGH>;
+        //BT,wake_gpio = <&gpio4 GPIO_D2 GPIO_ACTIVE_HIGH>;
+        //BT,wake_host_irq = <&gpio4 GPIO_D7 GPIO_ACTIVE_LOW>;
+
+        status = "okay";
+
+    };
+};
+
+&nandc {
+       status = "disabled"; // used nand set "disabled" ,used emmc set "okay"
+};  
+
+&emmc {
+       clock-frequency = <100000000>;
+       clock-freq-min-max = <400000 100000000>;
+
+        supports-highspeed;
+       supports-emmc;
+        bootpart-no-access;
+
+       //supports-DDR_MODE; //you should set the two value in your project. only close in RK3288-SDK board.
+       //caps2-mmc-hs200;
+
+        ignore-pm-notify;
+       keep-power-in-suspend;
+       
+       //poll-hw-reset 
+       status = "okay";
+};
+    
+&sdmmc {
+               clock-frequency = <50000000>;
+               clock-freq-min-max = <400000 50000000>;
+               supports-highspeed;
+               supports-sd;
+               broken-cd;
+               card-detect-delay = <200>;
+
+               ignore-pm-notify;
+               keep-power-in-suspend;
+       
+               //vmmc-supply = <&rk808_ldo5_reg>;
+               status = "okay";
+};
+               
+&sdio {
+               clock-frequency = <50000000>;
+               clock-freq-min-max = <200000 50000000>;
+               supports-highspeed;
+               supports-sdio;
+               ignore-pm-notify;
+               keep-power-in-suspend;
+               //cap-sdio-irq;
+               status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+       max-freq = <48000000>;  
+       /*
+       spi_test@00 {
+               compatible = "rockchip,spi_test_bus0_cs0";
+                reg = <0>;
+                spi-max-frequency = <24000000>;
+                //spi-cpha;
+               //spi-cpol;
+                poll_mode = <0>;
+               type = <0>;
+               enable_dma = <0>;
+
+       };
+
+       spi_test@01 {
+               compatible = "rockchip,spi_test_bus0_cs1";
+               reg = <1>;
+               spi-max-frequency = <24000000>;
+               spi-cpha;
+               spi-cpol;
+               poll_mode = <0>;
+               type = <0>;
+               enable_dma = <0>;               
+       };
+       */
+};
+
+&uart0 {
+        status = "okay";
+        dma-names = "!tx", "!rx";
+        //pinctrl-0 = <&uart0_xfer &uart0_cts>;
+};
+
+&i2c0 {
+       status = "okay";
+};
+
+&i2c1 {
+       status = "okay";
+};
+
+&i2c2 {
+       status = "okay";
+};

diff --git a/arch/arm/boot/dts/rk3036-sdk.dts b/arch/arm/boot/dts/rk3036-sdk.dts
new file mode 100755 (executable)
index 0000000..d7c5174
--- /dev/null
+++ b/arch/arm/boot/dts/rk3036-sdk.dts
@@ -0,0 +1,146 @@
+/dts-v1/;
+
+#include "rk3036.dtsi"
+
+/ {
+
+       fiq-debugger {
+               status = "okay";
+       };
+
+    wireless-wlan {
+        compatible = "wlan-platdata";
+
+        wifi_chip_type = "";
+        sdio_vref = <1800>; //1800mv or 3300mv
+
+        //power_ctrl_by_pmu;
+        //power_pmu_regulator = "act_ldo3";
+        //power_pmu_enable_level = <1>; //1->HIGH, 0->LOW
+
+        //vref_ctrl_enable;
+        //vref_ctrl_gpio = <&gpio0 GPIO_A2 GPIO_ACTIVE_HIGH>;
+        //vref_pmu_regulator = "act_ldo3";
+        //vref_pmu_enable_level = <1>; //1->HIGH, 0->LOW
+
+        //WIFI,poweren_gpio = <&gpio4 GPIO_D4 GPIO_ACTIVE_HIGH>;
+        //WIFI,host_wake_irq = <&gpio4 GPIO_D6 GPIO_ACTIVE_HIGH>;
+        //WIFI,reset_gpio = <&gpio0 GPIO_A2 GPIO_ACTIVE_LOW>;
+
+        status = "okay";
+    };
+
+    wireless-bluetooth {
+        compatible = "bluetooth-platdata";
+
+        //wifi-bt-power-toggle;
+
+        //uart_rts_gpios = <&gpio4 GPIO_C3 GPIO_ACTIVE_LOW>;
+        //pinctrl-names = "default","rts_gpio";
+        //pinctrl-0 = <&uart0_rts>;
+        //pinctrl-1 = <&uart0_rts_gpio>;
+
+        //BT,power_gpio = <&gpio4 GPIO_D3 GPIO_ACTIVE_HIGH>;
+        //BT,reset_gpio = <&gpio4 GPIO_D5 GPIO_ACTIVE_HIGH>;
+        //BT,wake_gpio = <&gpio4 GPIO_D2 GPIO_ACTIVE_HIGH>;
+        //BT,wake_host_irq = <&gpio4 GPIO_D7 GPIO_ACTIVE_LOW>;
+
+        status = "okay";
+
+    };
+};
+
+&nandc {
+       status = "disabled"; // used nand set "disabled" ,used emmc set "okay"
+};  
+
+&emmc {
+       clock-frequency = <100000000>;
+       clock-freq-min-max = <400000 100000000>;
+
+        supports-highspeed;
+       supports-emmc;
+        bootpart-no-access;
+
+       //supports-DDR_MODE; //you should set the two value in your project. only close in RK3288-SDK board.
+       //caps2-mmc-hs200;
+
+        ignore-pm-notify;
+       keep-power-in-suspend;
+       
+       //poll-hw-reset 
+       status = "okay";
+};
+    
+&sdmmc {
+               clock-frequency = <50000000>;
+               clock-freq-min-max = <400000 50000000>;
+               supports-highspeed;
+               supports-sd;
+               broken-cd;
+               card-detect-delay = <200>;
+
+               ignore-pm-notify;
+               keep-power-in-suspend;
+       
+               //vmmc-supply = <&rk808_ldo5_reg>;
+               status = "okay";
+};
+               
+&sdio {
+               clock-frequency = <50000000>;
+               clock-freq-min-max = <200000 50000000>;
+               supports-highspeed;
+               supports-sdio;
+               ignore-pm-notify;
+               keep-power-in-suspend;
+               //cap-sdio-irq;
+               status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+       max-freq = <48000000>;  
+       /*
+       spi_test@00 {
+               compatible = "rockchip,spi_test_bus0_cs0";
+                reg = <0>;
+                spi-max-frequency = <24000000>;
+                //spi-cpha;
+               //spi-cpol;
+                poll_mode = <0>;
+               type = <0>;
+               enable_dma = <0>;
+
+       };
+
+       spi_test@01 {
+               compatible = "rockchip,spi_test_bus0_cs1";
+               reg = <1>;
+               spi-max-frequency = <24000000>;
+               spi-cpha;
+               spi-cpol;
+               poll_mode = <0>;
+               type = <0>;
+               enable_dma = <0>;               
+       };
+       */
+};
+
+&uart0 {
+        status = "okay";
+        dma-names = "!tx", "!rx";
+        //pinctrl-0 = <&uart0_xfer &uart0_cts>;
+};
+
+&i2c0 {
+       status = "okay";
+};
+
+&i2c1 {
+       status = "okay";
+};
+
+&i2c2 {
+       status = "okay";
+};