#include <linux/init.h>
#include <linux/device.h>
#include <linux/string.h>
+#include <sound/ac97_codec.h>
/*
* Let drivers decide whether they want to support given codec from their
config SND_AC97_POWER_SAVE
bool "AC97 Power-Saving Mode"
- depends on SND_AC97_CODEC && EXPERIMENTAL
+ depends on SND_AC97_CODEC
default n
help
Say Y here to enable the aggressive power-saving support of
break;
}
}
- if (i >= ARRAY_SIZE(possible_ports))
+ if (i >= ARRAY_SIZE(possible_ports)) {
+ err = -EINVAL;
goto _err;
+ }
}
acard->chip = chip;
{ 0x574d4C04, 0xffffffff, "WM9704M,WM9704Q", patch_wolfson04, NULL},
{ 0x574d4C05, 0xffffffff, "WM9705,WM9710", patch_wolfson05, NULL},
{ 0x574d4C09, 0xffffffff, "WM9709", NULL, NULL},
-{ 0x574d4C12, 0xffffffff, "WM9711,WM9712", patch_wolfson11, NULL},
+{ 0x574d4C12, 0xffffffff, "WM9711,WM9712,WM9715", patch_wolfson11, NULL},
{ 0x574d4c13, 0xffffffff, "WM9713,WM9714", patch_wolfson13, NULL, AC97_DEFAULT_POWER_OFF},
{ 0x594d4800, 0xffffffff, "YMF743", patch_yamaha_ymf743, NULL },
{ 0x594d4802, 0xffffffff, "YMF752", NULL, NULL },
struct snd_ca0106_details {
u32 serial;
char * name;
- int ac97;
- int gpio_type;
- int i2c_adc;
- int spi_dac;
+ int ac97; /* ac97 = 0 -> Select MIC, Line in, TAD in, AUX in.
+ ac97 = 1 -> Default to AC97 in. */
+ int gpio_type; /* gpio_type = 1 -> shared mic-in/line-in
+ gpio_type = 2 -> shared side-out/line-in. */
+ int i2c_adc; /* with i2c_adc=1, the driver adds some capture volume
+ controls, phone, mic, line-in and aux. */
+ int spi_dac; /* spi_dac=1 adds the mute switch for each analog
+ output, front, rear, etc. */
};
// definition of the chip-specific record
.name = "MSI K8N Diamond MB",
.gpio_type = 2,
.i2c_adc = 1,
- .spi_dac = 2 } ,
+ .spi_dac = 1 } ,
/* Shuttle XPC SD31P which has an onboard Creative Labs
* Sound Blaster Live! 24-bit EAX
* high-definition 7.1 audio processor".
{
struct snd_card *card = pci_get_drvdata(pci);
struct snd_cs46xx *chip = card->private_data;
- int i, amp_saved;
+ int amp_saved;
+#ifdef CONFIG_SND_CS46XX_NEW_DSP
+ int i;
+#endif
pci_set_power_state(pci, PCI_D0);
pci_restore_state(pci);
.dev_free = snd_mixart_chip_dev_free,
};
- mgr->chip[idx] = chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
if (! chip) {
snd_printk(KERN_ERR "cannot allocate chip\n");
return -ENOMEM;
return err;
}
+ mgr->chip[idx] = chip;
snd_card_set_dev(card, &mgr->pci->dev);
return 0;
sprintf(card->longname, "%s [PCM #%d]", mgr->longname, i);
if ((err = snd_mixart_create(mgr, card, i)) < 0) {
+ snd_card_free(card);
snd_mixart_free(mgr);
return err;
}
.dev_free = pcxhr_chip_dev_free,
};
- mgr->chip[idx] = chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
if (! chip) {
snd_printk(KERN_ERR "cannot allocate chip\n");
return -ENOMEM;
return err;
}
+ mgr->chip[idx] = chip;
snd_card_set_dev(card, &mgr->pci->dev);
return 0;
sprintf(card->longname, "%s [PCM #%d]", mgr->longname, i);
if ((err = pcxhr_create(mgr, card, i)) < 0) {
+ snd_card_free(card);
pcxhr_free(mgr);
return err;
}
#define MAX_WRITE_RETRY 10 /* cmd interface limits */
#define MAX_ERROR_COUNT 10
-#define CMDIF_TIMEOUT 500000
+#define CMDIF_TIMEOUT 50000
#define RESET_TRIES 5
#define READ_PORT_ULONG(p) inl((unsigned long)&(p))
{ "Software lock", 40 }
};
-int __devinit snd_usb_caiaq_control_init(struct snd_usb_caiaqdev *dev)
+static int __devinit add_controls(struct caiaq_controller *c, int num,
+ struct snd_usb_caiaqdev *dev)
{
- int i;
+ int i, ret;
struct snd_kcontrol *kc;
+ for (i = 0; i < num; i++, c++) {
+ kcontrol_template.name = c->name;
+ kcontrol_template.private_value = c->index;
+ kc = snd_ctl_new1(&kcontrol_template, dev);
+ ret = snd_ctl_add(dev->chip.card, kc);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+int __devinit snd_usb_caiaq_control_init(struct snd_usb_caiaqdev *dev)
+{
+ int ret = 0;
+
switch (dev->chip.usb_id) {
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
- for (i = 0; i < ARRAY_SIZE(ak1_controller); i++) {
- struct caiaq_controller *c = ak1_controller + i;
- kcontrol_template.name = c->name;
- kcontrol_template.private_value = c->index;
- kc = snd_ctl_new1(&kcontrol_template, dev);
- snd_ctl_add(dev->chip.card, kc);
- }
-
+ ret = add_controls(ak1_controller,
+ ARRAY_SIZE(ak1_controller), dev);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
- for (i = 0; i < ARRAY_SIZE(rk2_controller); i++) {
- struct caiaq_controller *c = rk2_controller + i;
- kcontrol_template.name = c->name;
- kcontrol_template.private_value = c->index;
- kc = snd_ctl_new1(&kcontrol_template, dev);
- snd_ctl_add(dev->chip.card, kc);
- }
-
+ ret = add_controls(rk2_controller,
+ ARRAY_SIZE(rk2_controller), dev);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3):
- for (i = 0; i < ARRAY_SIZE(rk3_controller); i++) {
- struct caiaq_controller *c = rk3_controller + i;
- kcontrol_template.name = c->name;
- kcontrol_template.private_value = c->index;
- kc = snd_ctl_new1(&kcontrol_template, dev);
- snd_ctl_add(dev->chip.card, kc);
- }
-
+ ret = add_controls(rk3_controller,
+ ARRAY_SIZE(rk3_controller), dev);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER):
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2):
- for (i = 0; i < ARRAY_SIZE(kore_controller); i++) {
- struct caiaq_controller *c = kore_controller + i;
- kcontrol_template.name = c->name;
- kcontrol_template.private_value = c->index;
- kc = snd_ctl_new1(&kcontrol_template, dev);
- snd_ctl_add(dev->chip.card, kc);
- }
-
+ ret = add_controls(kore_controller,
+ ARRAY_SIZE(kore_controller), dev);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ):
- for (i = 0; i < ARRAY_SIZE(a8dj_controller); i++) {
- struct caiaq_controller *c = a8dj_controller + i;
- kcontrol_template.name = c->name;
- kcontrol_template.private_value = c->index;
- kc = snd_ctl_new1(&kcontrol_template, dev);
- snd_ctl_add(dev->chip.card, kc);
- }
-
+ ret = add_controls(a8dj_controller,
+ ARRAY_SIZE(a8dj_controller), dev);
break;
}
- return 0;
+ return ret;
}
#endif
MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.8");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.9");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
"{Native Instruments, RigKontrol3},"
}
}
-int usb_stream_prepare_playback(struct usb_stream_kernel *sk, struct urb *inurb)
+static int usb_stream_prepare_playback(struct usb_stream_kernel *sk,
+ struct urb *inurb)
{
struct usb_stream *s = sk->s;
struct urb *io;