1) Interrupt client nodes
-------------------------
-Nodes that describe devices which generate interrupts must contain an either an
-"interrupts" property or an "interrupts-extended" property. These properties
-contain a list of interrupt specifiers, one per output interrupt. The format of
-the interrupt specifier is determined by the interrupt controller to which the
-interrupts are routed; see section 2 below for details.
+Nodes that describe devices which generate interrupts must contain an
+"interrupts" property, an "interrupts-extended" property, or both. If both are
+present, the latter should take precedence; the former may be provided simply
+for compatibility with software that does not recognize the latter. These
+properties contain a list of interrupt specifiers, one per output interrupt. The
+format of the interrupt specifier is determined by the interrupt controller to
+which the interrupts are routed; see section 2 below for details.
Example:
interrupt-parent = <&intc1>;
Required properties:
- compatible: should contain "snps,dw-pcie" to identify the core.
+- reg: Should contain the configuration address space.
+- reg-names: Must be "config" for the PCIe configuration space.
+ (The old way of getting the configuration address space from "ranges"
+ is deprecated and should be avoided.)
- #address-cells: set to <3>
- #size-cells: set to <2>
- device_type: set to "pci"
--- /dev/null
+TI PCI Controllers
+
+PCIe Designware Controller
+ - compatible: Should be "ti,dra7-pcie""
+ - reg : Two register ranges as listed in the reg-names property
+ - reg-names : The first entry must be "ti-conf" for the TI specific registers
+ The second entry must be "rc-dbics" for the designware pcie
+ registers
+ The third entry must be "config" for the PCIe configuration space
+ - phys : list of PHY specifiers (used by generic PHY framework)
+ - phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+ number of PHYs as specified in *phys* property.
+ - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
+ where <X> is the instance number of the pcie from the HW spec.
+ - interrupts : Two interrupt entries must be specified. The first one is for
+ main interrupt line and the second for MSI interrupt line.
+ - #address-cells,
+ #size-cells,
+ #interrupt-cells,
+ device_type,
+ ranges,
+ num-lanes,
+ interrupt-map-mask,
+ interrupt-map : as specified in ../designware-pcie.txt
+
+Example:
+axi {
+ compatible = "simple-bus";
+ #size-cells = <1>;
+ #address-cells = <1>;
+ ranges = <0x51000000 0x51000000 0x3000
+ 0x0 0x20000000 0x10000000>;
+ pcie@51000000 {
+ compatible = "ti,dra7-pcie";
+ reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
+ reg-names = "rc_dbics", "ti_conf", "config";
+ interrupts = <0 232 0x4>, <0 233 0x4>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x03000 0 0x00010000
+ 0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+ #interrupt-cells = <1>;
+ num-lanes = <1>;
+ ti,hwmods = "pcie1";
+ phys = <&pcie1_phy>;
+ phy-names = "pcie-phy0";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 1>,
+ <0 0 0 2 &pcie_intc 2>,
+ <0 0 0 3 &pcie_intc 3>,
+ <0 0 0 4 &pcie_intc 4>;
+ pcie_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+};
locking rules:
inode->i_lock may block
fl_copy_lock: yes no
-fl_release_private: maybe no
+fl_release_private: maybe maybe[1]
+
+[1]: ->fl_release_private for flock or POSIX locks is currently allowed
+to block. Leases however can still be freed while the i_lock is held and
+so fl_release_private called on a lease should not block.
----------------------- lock_manager_operations ---------------------------
prototypes:
- info on Linux Sony Programmable I/O Device support.
thinkpad-acpi.txt
- information on the (IBM and Lenovo) ThinkPad ACPI Extras driver.
+toshiba_haps.txt
+ - information on the Toshiba HDD Active Protection Sensor driver.
--- /dev/null
+Kernel driver toshiba_haps
+Toshiba HDD Active Protection Sensor
+====================================
+
+Author: Azael Avalos <coproscefalo@gmail.com>
+
+
+0. Contents
+-----------
+
+1. Description
+2. Interface
+3. Accelerometer axes
+4. Supported devices
+5. Usage
+
+
+1. Description
+--------------
+
+This driver provides support for the accelerometer found in various Toshiba
+laptops, being called "Toshiba HDD Protection - Shock Sensor" officialy,
+and detects laptops automatically with this device.
+On Windows, Toshiba provided software monitors this device and provides
+automatic HDD protection (head unload) on sudden moves or harsh vibrations,
+however, this driver only provides a notification via a sysfs file to let
+userspace tools or daemons act accordingly, as well as providing a sysfs
+file to set the desired protection level or sensor sensibility.
+
+
+2. Interface
+------------
+
+This device comes with 3 methods:
+_STA - Checks existence of the device, returning Zero if the device does not
+ exists or is not supported.
+PTLV - Sets the desired protection level.
+RSSS - Shuts down the HDD protection interface for a few seconds,
+ then restores normal operation.
+
+Note:
+The presence of Solid State Drives (SSD) can make this driver to fail loading,
+given the fact that such drives have no movable parts, and thus, not requiring
+any "protection" as well as failing during the evaluation of the _STA method
+found under this device.
+
+
+3. Accelerometer axes
+---------------------
+
+This device does not report any axes, however, to query the sensor position
+a couple HCI (Hardware Configuration Interface) calls (0x6D and 0xA6) are
+provided to query such information, handled by the kernel module toshiba_acpi
+since kernel version 3.15.
+
+
+4. Supported devices
+--------------------
+
+This driver binds itself to the ACPI device TOS620A, and any Toshiba laptop
+with this device is supported, given the fact that they have the presence of
+conventional HDD and not only SSD, or a combination of both HDD and SSD.
+
+
+5. Usage
+--------
+
+The sysfs files under /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS620A:00/ are:
+protection_level - The protection_level is readable and writeable, and
+ provides a way to let userspace query the current protection
+ level, as well as set the desired protection level, the
+ available protection levels are:
+ 0 - Disabled | 1 - Low | 2 - Medium | 3 - High
+reset_protection - The reset_protection entry is writeable only, being "1"
+ the only parameter it accepts, it is used to trigger
+ a reset of the protection interface.
FREESCALE SOC SOUND DRIVERS
M: Timur Tabi <timur@tabi.org>
+M: Nicolin Chen <nicoleotsuka@gmail.com>
+M: Xiubo Li <Li.Xiubo@freescale.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
L: linuxppc-dev@lists.ozlabs.org
S: Maintained
F: sound/soc/fsl/fsl*
+F: sound/soc/fsl/imx*
F: sound/soc/fsl/mpc8610_hpcd.c
FREEVXFS FILESYSTEM
F: include/uapi/linux/i2c.h
F: include/uapi/linux/i2c-*.h
+I2C ACPI SUPPORT
+M: Mika Westerberg <mika.westerberg@linux.intel.com>
+L: linux-i2c@vger.kernel.org
+L: linux-acpi@vger.kernel.org
+S: Maintained
+F: drivers/i2c/i2c-acpi.c
+
I2C-TAOS-EVM DRIVER
M: Jean Delvare <jdelvare@suse.de>
L: linux-i2c@vger.kernel.org
F: Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
F: drivers/pci/host/pci-tegra.c
+PCI DRIVER FOR TI DRA7XX
+M: Kishon Vijay Abraham I <kishon@ti.com>
+L: linux-omap@vger.kernel.org
+L: linux-pci@vger.kernel.org
+S: Supported
+F: Documentation/devicetree/bindings/pci/ti-pci.txt
+F: drivers/pci/host/pci-dra7xx.c
+
PCI DRIVER FOR RENESAS R-CAR
M: Simon Horman <horms@verge.net.au>
L: linux-pci@vger.kernel.org
X86 PLATFORM DRIVERS
M: Matthew Garrett <matthew.garrett@nebula.com>
L: platform-driver-x86@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.git
+T: git git://cavan.codon.org.uk/platform-drivers-x86.git
S: Maintained
F: drivers/platform/x86/
VERSION = 3
-PATCHLEVEL = 16
+PATCHLEVEL = 17
SUBLEVEL = 0
-EXTRAVERSION =
+EXTRAVERSION = -rc1
NAME = Shuffling Zombie Juror
# *DOCUMENTATION*
#define KSTK_EIP(tsk) ((tsk)->thread.frame0->pc)
#define KSTK_ESP(tsk) ((tsk)->thread.frame0->sp)
-#define cpu_relax() barrier()
+#define cpu_relax() barrier()
+#define cpu_relax_lowlatency() cpu_relax()
/* data cache prefetch */
#define ARCH_HAS_PREFETCH
-#define NR_syscalls 316 /* length of syscall table */
+#define NR_syscalls 317 /* length of syscall table */
/*
* The following defines stop scripts/checksyscalls.sh from complaining about
#define __NR_sched_getattr 1337
#define __NR_renameat2 1338
#define __NR_getrandom 1339
+#define __NR_memfd_create 1339
#endif /* _UAPI_ASM_IA64_UNISTD_H */
data8 sys_sched_getattr
data8 sys_renameat2
data8 sys_getrandom
+ data8 sys_memfd_create // 1340
.org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
#define __NR_sched_setattr 381
#define __NR_sched_getattr 382
#define __NR_renameat2 383
+#define __NR_seccomp 384
+#define __NR_getrandom 385
+#define __NR_memfd_create 386
#endif /* _UAPI_ASM_MICROBLAZE_UNISTD_H */
.long sys_sched_setattr
.long sys_sched_getattr
.long sys_renameat2
+ .long sys_seccomp
+ .long sys_getrandom /* 385 */
+ .long sys_memfd_create
ri = kmalloc(sizeof(struct kvm_rma_info), GFP_KERNEL);
if (!ri)
return NULL;
- page = cma_alloc(kvm_cma, kvm_rma_pages, get_order(kvm_rma_pages));
+ page = cma_alloc(kvm_cma, kvm_rma_pages, order_base_2(kvm_rma_pages));
if (!page)
goto err_out;
atomic_set(&ri->use_count, 1);
{
unsigned long align_pages = HPT_ALIGN_PAGES;
- VM_BUG_ON(get_order(nr_pages) < KVM_CMA_CHUNK_ORDER - PAGE_SHIFT);
+ VM_BUG_ON(order_base_2(nr_pages) < KVM_CMA_CHUNK_ORDER - PAGE_SHIFT);
/* Old CPUs require HPT aligned on a multiple of its size */
if (!cpu_has_feature(CPU_FTR_ARCH_206))
align_pages = nr_pages;
- return cma_alloc(kvm_cma, nr_pages, get_order(align_pages));
+ return cma_alloc(kvm_cma, nr_pages, order_base_2(align_pages));
}
EXPORT_SYMBOL_GPL(kvm_alloc_hpt);
#define KVM_REFILL_PAGES 25
#define KVM_MAX_CPUID_ENTRIES 80
#define KVM_NR_FIXED_MTRR_REGION 88
-#define KVM_NR_VAR_MTRR 10
+#define KVM_NR_VAR_MTRR 8
#define ASYNC_PF_PER_VCPU 64
#define MSR_CORE_C1_RES 0x00000660
+#define MSR_CC6_DEMOTION_POLICY_CONFIG 0x00000668
+#define MSR_MC6_DEMOTION_POLICY_CONFIG 0x00000669
+
#define MSR_AMD64_MC0_MASK 0xc0010044
#define MSR_IA32_MCx_CTL(x) (MSR_IA32_MC0_CTL + 4*(x))
goto exception;
break;
case VCPU_SREG_CS:
- if (in_task_switch && rpl != dpl)
- goto exception;
-
if (!(seg_desc.type & 8))
goto exception;
ctxt->execute = opcode.u.execute;
+ if (unlikely(ctxt->ud) && likely(!(ctxt->d & EmulateOnUD)))
+ return EMULATION_FAILED;
+
if (unlikely(ctxt->d &
- (NotImpl|EmulateOnUD|Stack|Op3264|Sse|Mmx|Intercept|CheckPerm))) {
+ (NotImpl|Stack|Op3264|Sse|Mmx|Intercept|CheckPerm))) {
/*
* These are copied unconditionally here, and checked unconditionally
* in x86_emulate_insn.
if (ctxt->d & NotImpl)
return EMULATION_FAILED;
- if (!(ctxt->d & EmulateOnUD) && ctxt->ud)
- return EMULATION_FAILED;
-
if (mode == X86EMUL_MODE_PROT64 && (ctxt->d & Stack))
ctxt->op_bytes = 8;
.cleanup = virtio_cleanup,
.priv = (unsigned long)vi,
.name = vi->name,
+ .quality = 1000,
};
vdev->priv = vi;
static __u8 *ch_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
{
- if (*rsize >= 17 && rdesc[11] == 0x3c && rdesc[12] == 0x02) {
+ if (*rsize >= 18 && rdesc[11] == 0x3c && rdesc[12] == 0x02) {
hid_info(hdev, "fixing up Cherry Cymotion report descriptor\n");
rdesc[11] = rdesc[16] = 0xff;
rdesc[12] = rdesc[17] = 0x03;
0xC0 /* End Collection */
};
+/* Parameter indices */
+enum huion_prm {
+ HUION_PRM_X_LM = 1,
+ HUION_PRM_Y_LM = 2,
+ HUION_PRM_PRESSURE_LM = 4,
+ HUION_PRM_RESOLUTION = 5,
+ HUION_PRM_NUM
+};
+
/* Driver data */
struct huion_drvdata {
__u8 *rdesc;
int rc;
struct usb_device *usb_dev = hid_to_usb_dev(hdev);
struct huion_drvdata *drvdata = hid_get_drvdata(hdev);
- __le16 buf[6];
+ __le16 *buf = NULL;
+ size_t len;
+ s32 params[HUION_PH_ID_NUM];
+ s32 resolution;
+ __u8 *p;
+ s32 v;
/*
* Read string descriptor containing tablet parameters. The specific
* driver traffic.
* NOTE: This enables fully-functional tablet mode.
*/
+ len = HUION_PRM_NUM * sizeof(*buf);
+ buf = kmalloc(len, GFP_KERNEL);
+ if (buf == NULL) {
+ hid_err(hdev, "failed to allocate parameter buffer\n");
+ rc = -ENOMEM;
+ goto cleanup;
+ }
rc = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
(USB_DT_STRING << 8) + 0x64,
- 0x0409, buf, sizeof(buf),
+ 0x0409, buf, len,
USB_CTRL_GET_TIMEOUT);
- if (rc == -EPIPE)
- hid_warn(hdev, "device parameters not found\n");
- else if (rc < 0)
- hid_warn(hdev, "failed to get device parameters: %d\n", rc);
- else if (rc != sizeof(buf))
- hid_warn(hdev, "invalid device parameters\n");
- else {
- s32 params[HUION_PH_ID_NUM];
- s32 resolution;
- __u8 *p;
- s32 v;
+ if (rc == -EPIPE) {
+ hid_err(hdev, "device parameters not found\n");
+ rc = -ENODEV;
+ goto cleanup;
+ } else if (rc < 0) {
+ hid_err(hdev, "failed to get device parameters: %d\n", rc);
+ rc = -ENODEV;
+ goto cleanup;
+ } else if (rc != len) {
+ hid_err(hdev, "invalid device parameters\n");
+ rc = -ENODEV;
+ goto cleanup;
+ }
- /* Extract device parameters */
- params[HUION_PH_ID_X_LM] = le16_to_cpu(buf[1]);
- params[HUION_PH_ID_Y_LM] = le16_to_cpu(buf[2]);
- params[HUION_PH_ID_PRESSURE_LM] = le16_to_cpu(buf[4]);
- resolution = le16_to_cpu(buf[5]);
- if (resolution == 0) {
- params[HUION_PH_ID_X_PM] = 0;
- params[HUION_PH_ID_Y_PM] = 0;
- } else {
- params[HUION_PH_ID_X_PM] = params[HUION_PH_ID_X_LM] *
- 1000 / resolution;
- params[HUION_PH_ID_Y_PM] = params[HUION_PH_ID_Y_LM] *
- 1000 / resolution;
- }
+ /* Extract device parameters */
+ params[HUION_PH_ID_X_LM] = le16_to_cpu(buf[HUION_PRM_X_LM]);
+ params[HUION_PH_ID_Y_LM] = le16_to_cpu(buf[HUION_PRM_Y_LM]);
+ params[HUION_PH_ID_PRESSURE_LM] =
+ le16_to_cpu(buf[HUION_PRM_PRESSURE_LM]);
+ resolution = le16_to_cpu(buf[HUION_PRM_RESOLUTION]);
+ if (resolution == 0) {
+ params[HUION_PH_ID_X_PM] = 0;
+ params[HUION_PH_ID_Y_PM] = 0;
+ } else {
+ params[HUION_PH_ID_X_PM] = params[HUION_PH_ID_X_LM] *
+ 1000 / resolution;
+ params[HUION_PH_ID_Y_PM] = params[HUION_PH_ID_Y_LM] *
+ 1000 / resolution;
+ }
- /* Allocate fixed report descriptor */
- drvdata->rdesc = devm_kmalloc(&hdev->dev,
- sizeof(huion_tablet_rdesc_template),
- GFP_KERNEL);
- if (drvdata->rdesc == NULL) {
- hid_err(hdev, "failed to allocate fixed rdesc\n");
- return -ENOMEM;
- }
- drvdata->rsize = sizeof(huion_tablet_rdesc_template);
+ /* Allocate fixed report descriptor */
+ drvdata->rdesc = devm_kmalloc(&hdev->dev,
+ sizeof(huion_tablet_rdesc_template),
+ GFP_KERNEL);
+ if (drvdata->rdesc == NULL) {
+ hid_err(hdev, "failed to allocate fixed rdesc\n");
+ rc = -ENOMEM;
+ goto cleanup;
+ }
+ drvdata->rsize = sizeof(huion_tablet_rdesc_template);
- /* Format fixed report descriptor */
- memcpy(drvdata->rdesc, huion_tablet_rdesc_template,
- drvdata->rsize);
- for (p = drvdata->rdesc;
- p <= drvdata->rdesc + drvdata->rsize - 4;) {
- if (p[0] == 0xFE && p[1] == 0xED && p[2] == 0x1D &&
- p[3] < sizeof(params)) {
- v = params[p[3]];
- put_unaligned(cpu_to_le32(v), (s32 *)p);
- p += 4;
- } else {
- p++;
- }
+ /* Format fixed report descriptor */
+ memcpy(drvdata->rdesc, huion_tablet_rdesc_template,
+ drvdata->rsize);
+ for (p = drvdata->rdesc;
+ p <= drvdata->rdesc + drvdata->rsize - 4;) {
+ if (p[0] == 0xFE && p[1] == 0xED && p[2] == 0x1D &&
+ p[3] < sizeof(params)) {
+ v = params[p[3]];
+ put_unaligned(cpu_to_le32(v), (s32 *)p);
+ p += 4;
+ } else {
+ p++;
}
}
- return 0;
+ rc = 0;
+
+cleanup:
+ kfree(buf);
+ return rc;
}
static int huion_probe(struct hid_device *hdev, const struct hid_device_id *id)
* - change the button usage range to 4-7 for the extra
* buttons
*/
- if (*rsize >= 74 &&
+ if (*rsize >= 75 &&
rdesc[61] == 0x05 && rdesc[62] == 0x08 &&
rdesc[63] == 0x19 && rdesc[64] == 0x08 &&
rdesc[65] == 0x29 && rdesc[66] == 0x0f &&
struct usb_device_descriptor *udesc;
__u16 bcdDevice, rev_maj, rev_min;
- if ((drv_data->quirks & LG_RDESC) && *rsize >= 90 && rdesc[83] == 0x26 &&
+ if ((drv_data->quirks & LG_RDESC) && *rsize >= 91 && rdesc[83] == 0x26 &&
rdesc[84] == 0x8c && rdesc[85] == 0x02) {
hid_info(hdev,
"fixing up Logitech keyboard report descriptor\n");
rdesc[84] = rdesc[89] = 0x4d;
rdesc[85] = rdesc[90] = 0x10;
}
- if ((drv_data->quirks & LG_RDESC_REL_ABS) && *rsize >= 50 &&
+ if ((drv_data->quirks & LG_RDESC_REL_ABS) && *rsize >= 51 &&
rdesc[32] == 0x81 && rdesc[33] == 0x06 &&
rdesc[49] == 0x81 && rdesc[50] == 0x06) {
hid_info(hdev,
drv_data = hid_get_drvdata(hid);
if (!drv_data) {
hid_err(hid, "Private driver data not found!\n");
- return 0;
+ return -EINVAL;
}
entry = drv_data->device_props;
if (!entry) {
hid_err(hid, "Device properties not found!\n");
- return 0;
+ return -EINVAL;
}
if (range == 0)
return;
}
- if ((dj_report->device_index < DJ_DEVICE_INDEX_MIN) ||
- (dj_report->device_index > DJ_DEVICE_INDEX_MAX)) {
- dev_err(&djrcv_hdev->dev, "%s: invalid device index:%d\n",
- __func__, dj_report->device_index);
- return;
- }
-
if (djrcv_dev->paired_dj_devices[dj_report->device_index]) {
/* The device is already known. No need to reallocate it. */
dbg_hid("%s: device is already known\n", __func__);
if (!out_buf)
return -ENOMEM;
- if (count < DJREPORT_SHORT_LENGTH - 2)
+ if (count > DJREPORT_SHORT_LENGTH - 2)
count = DJREPORT_SHORT_LENGTH - 2;
out_buf[0] = REPORT_ID_DJ_SHORT;
* device (via hid_input_report() ) and return 1 so hid-core does not do
* anything else with it.
*/
+ if ((dj_report->device_index < DJ_DEVICE_INDEX_MIN) ||
+ (dj_report->device_index > DJ_DEVICE_INDEX_MAX)) {
+ dev_err(&hdev->dev, "%s: invalid device index:%d\n",
+ __func__, dj_report->device_index);
+ return false;
+ }
spin_lock_irqsave(&djrcv_dev->lock, flags);
if (dj_report->report_id == REPORT_ID_DJ_SHORT) {
static __u8 *mr_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
{
- if (*rsize >= 30 && rdesc[29] == 0x05 && rdesc[30] == 0x09) {
+ if (*rsize >= 31 && rdesc[29] == 0x05 && rdesc[30] == 0x09) {
hid_info(hdev, "fixing up button/consumer in HID report descriptor\n");
rdesc[30] = 0x0c;
}
static __u8 *pl_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
{
- if (*rsize >= 60 && rdesc[39] == 0x2a && rdesc[40] == 0xf5 &&
+ if (*rsize >= 62 && rdesc[39] == 0x2a && rdesc[40] == 0xf5 &&
rdesc[41] == 0x00 && rdesc[59] == 0x26 &&
rdesc[60] == 0xf9 && rdesc[61] == 0x00) {
hid_info(hdev, "fixing up Petalynx Maxter Remote report descriptor\n");
return ret;
}
- if (!test_bit(RMI_STARTED, &data->flags)) {
- hid_hw_stop(hdev);
- return -EIO;
- }
+ if (!test_bit(RMI_STARTED, &data->flags))
+ /*
+ * The device maybe in the bootloader if rmi_input_configured
+ * failed to find F11 in the PDT. Print an error, but don't
+ * return an error from rmi_probe so that hidraw will be
+ * accessible from userspace. That way a userspace tool
+ * can be used to reload working firmware on the touchpad.
+ */
+ hid_err(hdev, "Device failed to be properly configured\n");
return 0;
}
ret = -EINVAL;
goto err_stop_hw;
}
- sd->hid_sensor_hub_client_devs = kzalloc(dev_cnt *
- sizeof(struct mfd_cell),
- GFP_KERNEL);
+ sd->hid_sensor_hub_client_devs = devm_kzalloc(&hdev->dev, dev_cnt *
+ sizeof(struct mfd_cell),
+ GFP_KERNEL);
if (sd->hid_sensor_hub_client_devs == NULL) {
hid_err(hdev, "Failed to allocate memory for mfd cells\n");
ret = -ENOMEM;
if (collection->type == HID_COLLECTION_PHYSICAL) {
- hsdev = kzalloc(sizeof(*hsdev), GFP_KERNEL);
+ hsdev = devm_kzalloc(&hdev->dev, sizeof(*hsdev),
+ GFP_KERNEL);
if (!hsdev) {
hid_err(hdev, "cannot allocate hid_sensor_hub_device\n");
ret = -ENOMEM;
- goto err_no_mem;
+ goto err_stop_hw;
}
hsdev->hdev = hdev;
hsdev->vendor_id = hdev->vendor;
if (last_hsdev)
last_hsdev->end_collection_index = i;
last_hsdev = hsdev;
- name = kasprintf(GFP_KERNEL, "HID-SENSOR-%x",
- collection->usage);
+ name = devm_kasprintf(&hdev->dev, GFP_KERNEL,
+ "HID-SENSOR-%x",
+ collection->usage);
if (name == NULL) {
hid_err(hdev, "Failed MFD device name\n");
ret = -ENOMEM;
- kfree(hsdev);
- goto err_no_mem;
+ goto err_stop_hw;
}
sd->hid_sensor_hub_client_devs[
sd->hid_sensor_client_cnt].id =
ret = mfd_add_devices(&hdev->dev, 0, sd->hid_sensor_hub_client_devs,
sd->hid_sensor_client_cnt, NULL, 0, NULL);
if (ret < 0)
- goto err_no_mem;
+ goto err_stop_hw;
return ret;
-err_no_mem:
- for (i = 0; i < sd->hid_sensor_client_cnt; ++i) {
- kfree(sd->hid_sensor_hub_client_devs[i].name);
- kfree(sd->hid_sensor_hub_client_devs[i].platform_data);
- }
- kfree(sd->hid_sensor_hub_client_devs);
err_stop_hw:
hid_hw_stop(hdev);
{
struct sensor_hub_data *data = hid_get_drvdata(hdev);
unsigned long flags;
- int i;
hid_dbg(hdev, " hardware removed\n");
hid_hw_close(hdev);
complete(&data->pending.ready);
spin_unlock_irqrestore(&data->lock, flags);
mfd_remove_devices(&hdev->dev);
- for (i = 0; i < data->hid_sensor_client_cnt; ++i) {
- kfree(data->hid_sensor_hub_client_devs[i].name);
- kfree(data->hid_sensor_hub_client_devs[i].platform_data);
- }
- kfree(data->hid_sensor_hub_client_devs);
hid_set_drvdata(hdev, NULL);
mutex_destroy(&data->mutex);
}
static __u8 *sp_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
{
- if (*rsize >= 107 && rdesc[104] == 0x26 && rdesc[105] == 0x80 &&
+ if (*rsize >= 112 && rdesc[104] == 0x26 && rdesc[105] == 0x80 &&
rdesc[106] == 0x03) {
hid_info(hdev, "fixing up Sunplus Wireless Desktop report descriptor\n");
rdesc[105] = rdesc[110] = 0x03;
This I2C support can also be built as a module. If so, the module
will be called i2c-core.
-config I2C_ACPI
- bool "I2C ACPI support"
- select I2C
- depends on ACPI
+config ACPI_I2C_OPREGION
+ bool "ACPI I2C Operation region support"
+ depends on I2C=y && ACPI
default y
help
- Say Y here if you want to enable ACPI I2C support. This includes support
- for automatic enumeration of I2C slave devices and support for ACPI I2C
- Operation Regions. Operation Regions allow firmware (BIOS) code to
- access I2C slave devices, such as smart batteries through an I2C host
- controller driver.
+ Say Y here if you want to enable ACPI I2C operation region support.
+ Operation Regions allow firmware (BIOS) code to access I2C slave devices,
+ such as smart batteries through an I2C host controller driver.
if I2C
#
i2ccore-y := i2c-core.o
-i2ccore-$(CONFIG_I2C_ACPI) += i2c-acpi.o
+i2ccore-$(CONFIG_ACPI) += i2c-acpi.o
obj-$(CONFIG_I2C_BOARDINFO) += i2c-boardinfo.o
obj-$(CONFIG_I2C) += i2ccore.o
/* Older devices have their ID defined in <linux/pci_ids.h> */
#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12
+#define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS 0x2292
#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
{ 0, }
};
dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
}
+#ifdef CONFIG_ACPI_I2C_OPREGION
static int acpi_gsb_i2c_read_bytes(struct i2c_client *client,
u8 cmd, u8 *data, u8 data_len)
{
acpi_bus_detach_private_data(handle);
}
+#endif
* Indicate which enable bits to clear here.
*/
unsigned long auto_demotion_disable_flags;
+ bool byt_auto_demotion_disable_flag;
bool disable_promotion_to_c1e;
};
{
.enter = NULL }
};
+static struct cpuidle_state bdw_cstates[] = {
+ {
+ .name = "C1-BDW",
+ .desc = "MWAIT 0x00",
+ .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 2,
+ .target_residency = 2,
+ .enter = &intel_idle },
+ {
+ .name = "C1E-BDW",
+ .desc = "MWAIT 0x01",
+ .flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 10,
+ .target_residency = 20,
+ .enter = &intel_idle },
+ {
+ .name = "C3-BDW",
+ .desc = "MWAIT 0x10",
+ .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 40,
+ .target_residency = 100,
+ .enter = &intel_idle },
+ {
+ .name = "C6-BDW",
+ .desc = "MWAIT 0x20",
+ .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 133,
+ .target_residency = 400,
+ .enter = &intel_idle },
+ {
+ .name = "C7s-BDW",
+ .desc = "MWAIT 0x32",
+ .flags = MWAIT2flg(0x32) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 166,
+ .target_residency = 500,
+ .enter = &intel_idle },
+ {
+ .name = "C8-BDW",
+ .desc = "MWAIT 0x40",
+ .flags = MWAIT2flg(0x40) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 300,
+ .target_residency = 900,
+ .enter = &intel_idle },
+ {
+ .name = "C9-BDW",
+ .desc = "MWAIT 0x50",
+ .flags = MWAIT2flg(0x50) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 600,
+ .target_residency = 1800,
+ .enter = &intel_idle },
+ {
+ .name = "C10-BDW",
+ .desc = "MWAIT 0x60",
+ .flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 2600,
+ .target_residency = 7700,
+ .enter = &intel_idle },
+ {
+ .enter = NULL }
+};
static struct cpuidle_state atom_cstates[] = {
{
static const struct idle_cpu idle_cpu_byt = {
.state_table = byt_cstates,
.disable_promotion_to_c1e = true,
+ .byt_auto_demotion_disable_flag = true,
};
static const struct idle_cpu idle_cpu_ivb = {
.disable_promotion_to_c1e = true,
};
+static const struct idle_cpu idle_cpu_bdw = {
+ .state_table = bdw_cstates,
+ .disable_promotion_to_c1e = true,
+};
+
static const struct idle_cpu idle_cpu_avn = {
.state_table = avn_cstates,
.disable_promotion_to_c1e = true,
ICPU(0x3f, idle_cpu_hsw),
ICPU(0x45, idle_cpu_hsw),
ICPU(0x46, idle_cpu_hsw),
- ICPU(0x4D, idle_cpu_avn),
+ ICPU(0x4d, idle_cpu_avn),
+ ICPU(0x3d, idle_cpu_bdw),
+ ICPU(0x4f, idle_cpu_bdw),
+ ICPU(0x56, idle_cpu_bdw),
{}
};
MODULE_DEVICE_TABLE(x86cpu, intel_idle_ids);
if (icpu->auto_demotion_disable_flags)
on_each_cpu(auto_demotion_disable, NULL, 1);
+ if (icpu->byt_auto_demotion_disable_flag) {
+ wrmsrl(MSR_CC6_DEMOTION_POLICY_CONFIG, 0);
+ wrmsrl(MSR_MC6_DEMOTION_POLICY_CONFIG, 0);
+ }
+
if (icpu->disable_promotion_to_c1e) /* each-cpu is redundant */
on_each_cpu(c1e_promotion_disable, NULL, 1);
*/
if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery)) {
end_reshape(conf);
+ close_sync(conf);
return 0;
}
}
r10_bio = mempool_alloc(conf->r10buf_pool, GFP_NOIO);
+ r10_bio->state = 0;
raise_barrier(conf, rb2 != NULL);
atomic_set(&r10_bio->remaining, 0);
if (sync_blocks < max_sync)
max_sync = sync_blocks;
r10_bio = mempool_alloc(conf->r10buf_pool, GFP_NOIO);
+ r10_bio->state = 0;
r10_bio->mddev = mddev;
atomic_set(&r10_bio->remaining, 0);
read_more:
/* Now schedule reads for blocks from sector_nr to last */
r10_bio = mempool_alloc(conf->r10buf_pool, GFP_NOIO);
+ r10_bio->state = 0;
raise_barrier(conf, sectors_done != 0);
atomic_set(&r10_bio->remaining, 0);
r10_bio->mddev = mddev;
* on all the target devices.
*/
// FIXME
+ mempool_free(r10_bio, conf->r10buf_pool);
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
return sectors_done;
}
read_bio->bi_private = r10_bio;
read_bio->bi_end_io = end_sync_read;
read_bio->bi_rw = READ;
- read_bio->bi_flags &= ~(BIO_POOL_MASK - 1);
+ read_bio->bi_flags &= (~0UL << BIO_RESET_BITS);
read_bio->bi_flags |= 1 << BIO_UPTODATE;
read_bio->bi_vcnt = 0;
read_bio->bi_iter.bi_size = 0;
(!test_bit(R5_Insync, &dev->flags) || test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) &&
!test_bit(R5_OVERWRITE, &fdev[0]->flags)) ||
(sh->raid_conf->level == 6 && s->failed && s->to_write &&
- s->to_write < sh->raid_conf->raid_disks - 2 &&
+ s->to_write - s->non_overwrite < sh->raid_conf->raid_disks - 2 &&
(!test_bit(R5_Insync, &dev->flags) || test_bit(STRIPE_PREREAD_ACTIVE, &sh->state))))) {
/* we would like to get this block, possibly by computing it,
* otherwise read it if the backing disk is insync
set_bit(R5_Wantwrite, &dev->flags);
if (prexor)
continue;
+ if (s.failed > 1)
+ continue;
if (!test_bit(R5_Insync, &dev->flags) ||
((i == sh->pd_idx || i == sh->qd_idx) &&
s.failed == 0))
base = dt_mem_next_cell(dt_root_addr_cells, &prop);
size = dt_mem_next_cell(dt_root_size_cells, &prop);
- if (base && size &&
+ if (size &&
early_init_dt_reserve_memory_arch(base, size, nomap) == 0)
pr_debug("Reserved memory: reserved region for node '%s': base %pa, size %ld MiB\n",
uname, &base, (unsigned long)size / SZ_1M);
/* Get the reg property (if any) */
addr = of_get_property(device, "reg", NULL);
+ /* Try the new-style interrupts-extended first */
+ res = of_parse_phandle_with_args(device, "interrupts-extended",
+ "#interrupt-cells", index, out_irq);
+ if (!res)
+ return of_irq_parse_raw(addr, out_irq);
+
/* Get the interrupts property */
intspec = of_get_property(device, "interrupts", &intlen);
- if (intspec == NULL) {
- /* Try the new-style interrupts-extended */
- res = of_parse_phandle_with_args(device, "interrupts-extended",
- "#interrupt-cells", index, out_irq);
- if (res)
- return -EINVAL;
- return of_irq_parse_raw(addr, out_irq);
- }
+ if (intspec == NULL)
+ return -EINVAL;
+
intlen /= sizeof(*intspec);
pr_debug(" intspec=%d intlen=%d\n", be32_to_cpup(intspec), intlen);
#define NO_OF_NODES 2
static struct device_node *nodes[NO_OF_NODES];
static int last_node_index;
+static bool selftest_live_tree;
#define selftest(result, fmt, ...) { \
if (!(result)) { \
{
struct device_node *next, *root = np, *dup;
- if (!np) {
- pr_warn("%s: No tree to attach; not running tests\n",
- __func__);
- return -ENODATA;
- }
-
-
/* skip root node */
np = np->child;
/* storing a copy in temporary node */
static int __init selftest_data_add(void)
{
void *selftest_data;
- struct device_node *selftest_data_node;
+ struct device_node *selftest_data_node, *np;
extern uint8_t __dtb_testcases_begin[];
extern uint8_t __dtb_testcases_end[];
const int size = __dtb_testcases_end - __dtb_testcases_begin;
- if (!size || !of_allnodes) {
+ if (!size) {
pr_warn("%s: No testcase data to attach; not running tests\n",
__func__);
return -ENODATA;
return -ENOMEM;
}
of_fdt_unflatten_tree(selftest_data, &selftest_data_node);
+ if (!selftest_data_node) {
+ pr_warn("%s: No tree to attach; not running tests\n", __func__);
+ return -ENODATA;
+ }
+
+ if (!of_allnodes) {
+ /* enabling flag for removing nodes */
+ selftest_live_tree = true;
+ of_allnodes = selftest_data_node;
+
+ for_each_of_allnodes(np)
+ __of_attach_node_sysfs(np);
+ of_aliases = of_find_node_by_path("/aliases");
+ of_chosen = of_find_node_by_path("/chosen");
+ return 0;
+ }
/* attach the sub-tree to live tree */
return attach_node_and_children(selftest_data_node);
struct device_node *np;
struct property *prop;
+ if (selftest_live_tree) {
+ of_node_put(of_aliases);
+ of_node_put(of_chosen);
+ of_aliases = NULL;
+ of_chosen = NULL;
+ for_each_child_of_node(of_allnodes, np)
+ detach_node_and_children(np);
+ __of_detach_node_sysfs(of_allnodes);
+ of_allnodes = NULL;
+ return;
+ }
+
while (last_node_index >= 0) {
if (nodes[last_node_index]) {
np = of_find_node_by_path(nodes[last_node_index]->full_name);
menu "PCI host controller drivers"
depends on PCI
+config PCI_DRA7XX
+ bool "TI DRA7xx PCIe controller"
+ select PCIE_DW
+ depends on OF && HAS_IOMEM && TI_PIPE3
+ help
+ Enables support for the PCIe controller in the DRA7xx SoC. There
+ are two instances of PCIe controller in DRA7xx. This controller can
+ act both as EP and RC. This reuses the Designware core.
+
config PCI_MVEBU
bool "Marvell EBU PCIe controller"
- depends on ARCH_MVEBU || ARCH_DOVE || ARCH_KIRKWOOD
+ depends on ARCH_MVEBU || ARCH_DOVE
depends on OF
config PCIE_DW
obj-$(CONFIG_PCIE_DW) += pcie-designware.o
+obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
--- /dev/null
+/*
+ * pcie-dra7xx - PCIe controller driver for TI DRA7xx SoCs
+ *
+ * Copyright (C) 2013-2014 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Authors: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/resource.h>
+#include <linux/types.h>
+
+#include "pcie-designware.h"
+
+/* PCIe controller wrapper DRA7XX configuration registers */
+
+#define PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN 0x0024
+#define PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MAIN 0x0028
+#define ERR_SYS BIT(0)
+#define ERR_FATAL BIT(1)
+#define ERR_NONFATAL BIT(2)
+#define ERR_COR BIT(3)
+#define ERR_AXI BIT(4)
+#define ERR_ECRC BIT(5)
+#define PME_TURN_OFF BIT(8)
+#define PME_TO_ACK BIT(9)
+#define PM_PME BIT(10)
+#define LINK_REQ_RST BIT(11)
+#define LINK_UP_EVT BIT(12)
+#define CFG_BME_EVT BIT(13)
+#define CFG_MSE_EVT BIT(14)
+#define INTERRUPTS (ERR_SYS | ERR_FATAL | ERR_NONFATAL | ERR_COR | ERR_AXI | \
+ ERR_ECRC | PME_TURN_OFF | PME_TO_ACK | PM_PME | \
+ LINK_REQ_RST | LINK_UP_EVT | CFG_BME_EVT | CFG_MSE_EVT)
+
+#define PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI 0x0034
+#define PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MSI 0x0038
+#define INTA BIT(0)
+#define INTB BIT(1)
+#define INTC BIT(2)
+#define INTD BIT(3)
+#define MSI BIT(4)
+#define LEG_EP_INTERRUPTS (INTA | INTB | INTC | INTD)
+
+#define PCIECTRL_DRA7XX_CONF_DEVICE_CMD 0x0104
+#define LTSSM_EN 0x1
+
+#define PCIECTRL_DRA7XX_CONF_PHY_CS 0x010C
+#define LINK_UP BIT(16)
+
+struct dra7xx_pcie {
+ void __iomem *base;
+ struct phy **phy;
+ int phy_count;
+ struct device *dev;
+ struct pcie_port pp;
+};
+
+#define to_dra7xx_pcie(x) container_of((x), struct dra7xx_pcie, pp)
+
+static inline u32 dra7xx_pcie_readl(struct dra7xx_pcie *pcie, u32 offset)
+{
+ return readl(pcie->base + offset);
+}
+
+static inline void dra7xx_pcie_writel(struct dra7xx_pcie *pcie, u32 offset,
+ u32 value)
+{
+ writel(value, pcie->base + offset);
+}
+
+static int dra7xx_pcie_link_up(struct pcie_port *pp)
+{
+ struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pp);
+ u32 reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_PHY_CS);
+
+ return !!(reg & LINK_UP);
+}
+
+static int dra7xx_pcie_establish_link(struct pcie_port *pp)
+{
+ u32 reg;
+ unsigned int retries = 1000;
+ struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pp);
+
+ if (dw_pcie_link_up(pp)) {
+ dev_err(pp->dev, "link is already up\n");
+ return 0;
+ }
+
+ reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD);
+ reg |= LTSSM_EN;
+ dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD, reg);
+
+ while (retries--) {
+ reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_PHY_CS);
+ if (reg & LINK_UP)
+ break;
+ usleep_range(10, 20);
+ }
+
+ if (retries == 0) {
+ dev_err(pp->dev, "link is not up\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static void dra7xx_pcie_enable_interrupts(struct pcie_port *pp)
+{
+ struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pp);
+
+ dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN,
+ ~INTERRUPTS);
+ dra7xx_pcie_writel(dra7xx,
+ PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MAIN, INTERRUPTS);
+ dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI,
+ ~LEG_EP_INTERRUPTS & ~MSI);
+
+ if (IS_ENABLED(CONFIG_PCI_MSI))
+ dra7xx_pcie_writel(dra7xx,
+ PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MSI, MSI);
+ else
+ dra7xx_pcie_writel(dra7xx,
+ PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MSI,
+ LEG_EP_INTERRUPTS);
+}
+
+static void dra7xx_pcie_host_init(struct pcie_port *pp)
+{
+ dw_pcie_setup_rc(pp);
+ dra7xx_pcie_establish_link(pp);
+ if (IS_ENABLED(CONFIG_PCI_MSI))
+ dw_pcie_msi_init(pp);
+ dra7xx_pcie_enable_interrupts(pp);
+}
+
+static struct pcie_host_ops dra7xx_pcie_host_ops = {
+ .link_up = dra7xx_pcie_link_up,
+ .host_init = dra7xx_pcie_host_init,
+};
+
+static int dra7xx_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
+ irq_set_chip_data(irq, domain->host_data);
+ set_irq_flags(irq, IRQF_VALID);
+
+ return 0;
+}
+
+static const struct irq_domain_ops intx_domain_ops = {
+ .map = dra7xx_pcie_intx_map,
+};
+
+static int dra7xx_pcie_init_irq_domain(struct pcie_port *pp)
+{
+ struct device *dev = pp->dev;
+ struct device_node *node = dev->of_node;
+ struct device_node *pcie_intc_node = of_get_next_child(node, NULL);
+
+ if (!pcie_intc_node) {
+ dev_err(dev, "No PCIe Intc node found\n");
+ return PTR_ERR(pcie_intc_node);
+ }
+
+ pp->irq_domain = irq_domain_add_linear(pcie_intc_node, 4,
+ &intx_domain_ops, pp);
+ if (!pp->irq_domain) {
+ dev_err(dev, "Failed to get a INTx IRQ domain\n");
+ return PTR_ERR(pp->irq_domain);
+ }
+
+ return 0;
+}
+
+static irqreturn_t dra7xx_pcie_msi_irq_handler(int irq, void *arg)
+{
+ struct pcie_port *pp = arg;
+ struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pp);
+ u32 reg;
+
+ reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI);
+
+ switch (reg) {
+ case MSI:
+ dw_handle_msi_irq(pp);
+ break;
+ case INTA:
+ case INTB:
+ case INTC:
+ case INTD:
+ generic_handle_irq(irq_find_mapping(pp->irq_domain, ffs(reg)));
+ break;
+ }
+
+ dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI, reg);
+
+ return IRQ_HANDLED;
+}
+
+
+static irqreturn_t dra7xx_pcie_irq_handler(int irq, void *arg)
+{
+ struct dra7xx_pcie *dra7xx = arg;
+ u32 reg;
+
+ reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN);
+
+ if (reg & ERR_SYS)
+ dev_dbg(dra7xx->dev, "System Error\n");
+
+ if (reg & ERR_FATAL)
+ dev_dbg(dra7xx->dev, "Fatal Error\n");
+
+ if (reg & ERR_NONFATAL)
+ dev_dbg(dra7xx->dev, "Non Fatal Error\n");
+
+ if (reg & ERR_COR)
+ dev_dbg(dra7xx->dev, "Correctable Error\n");
+
+ if (reg & ERR_AXI)
+ dev_dbg(dra7xx->dev, "AXI tag lookup fatal Error\n");
+
+ if (reg & ERR_ECRC)
+ dev_dbg(dra7xx->dev, "ECRC Error\n");
+
+ if (reg & PME_TURN_OFF)
+ dev_dbg(dra7xx->dev,
+ "Power Management Event Turn-Off message received\n");
+
+ if (reg & PME_TO_ACK)
+ dev_dbg(dra7xx->dev,
+ "Power Management Turn-Off Ack message received\n");
+
+ if (reg & PM_PME)
+ dev_dbg(dra7xx->dev,
+ "PM Power Management Event message received\n");
+
+ if (reg & LINK_REQ_RST)
+ dev_dbg(dra7xx->dev, "Link Request Reset\n");
+
+ if (reg & LINK_UP_EVT)
+ dev_dbg(dra7xx->dev, "Link-up state change\n");
+
+ if (reg & CFG_BME_EVT)
+ dev_dbg(dra7xx->dev, "CFG 'Bus Master Enable' change\n");
+
+ if (reg & CFG_MSE_EVT)
+ dev_dbg(dra7xx->dev, "CFG 'Memory Space Enable' change\n");
+
+ dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN, reg);
+
+ return IRQ_HANDLED;
+}
+
+static int add_pcie_port(struct dra7xx_pcie *dra7xx,
+ struct platform_device *pdev)
+{
+ int ret;
+ struct pcie_port *pp;
+ struct resource *res;
+ struct device *dev = &pdev->dev;
+
+ pp = &dra7xx->pp;
+ pp->dev = dev;
+ pp->ops = &dra7xx_pcie_host_ops;
+
+ pp->irq = platform_get_irq(pdev, 1);
+ if (pp->irq < 0) {
+ dev_err(dev, "missing IRQ resource\n");
+ return -EINVAL;
+ }
+
+ ret = devm_request_irq(&pdev->dev, pp->irq,
+ dra7xx_pcie_msi_irq_handler, IRQF_SHARED,
+ "dra7-pcie-msi", pp);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request irq\n");
+ return ret;
+ }
+
+ if (!IS_ENABLED(CONFIG_PCI_MSI)) {
+ ret = dra7xx_pcie_init_irq_domain(pp);
+ if (ret < 0)
+ return ret;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rc_dbics");
+ pp->dbi_base = devm_ioremap(dev, res->start, resource_size(res));
+ if (!pp->dbi_base)
+ return -ENOMEM;
+
+ ret = dw_pcie_host_init(pp);
+ if (ret) {
+ dev_err(dra7xx->dev, "failed to initialize host\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __init dra7xx_pcie_probe(struct platform_device *pdev)
+{
+ u32 reg;
+ int ret;
+ int irq;
+ int i;
+ int phy_count;
+ struct phy **phy;
+ void __iomem *base;
+ struct resource *res;
+ struct dra7xx_pcie *dra7xx;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ char name[10];
+
+ dra7xx = devm_kzalloc(dev, sizeof(*dra7xx), GFP_KERNEL);
+ if (!dra7xx)
+ return -ENOMEM;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(dev, "missing IRQ resource\n");
+ return -EINVAL;
+ }
+
+ ret = devm_request_irq(dev, irq, dra7xx_pcie_irq_handler,
+ IRQF_SHARED, "dra7xx-pcie-main", dra7xx);
+ if (ret) {
+ dev_err(dev, "failed to request irq\n");
+ return ret;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ti_conf");
+ base = devm_ioremap_nocache(dev, res->start, resource_size(res));
+ if (!base)
+ return -ENOMEM;
+
+ phy_count = of_property_count_strings(np, "phy-names");
+ if (phy_count < 0) {
+ dev_err(dev, "unable to find the strings\n");
+ return phy_count;
+ }
+
+ phy = devm_kzalloc(dev, sizeof(*phy) * phy_count, GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ for (i = 0; i < phy_count; i++) {
+ snprintf(name, sizeof(name), "pcie-phy%d", i);
+ phy[i] = devm_phy_get(dev, name);
+ if (IS_ERR(phy[i]))
+ return PTR_ERR(phy[i]);
+
+ ret = phy_init(phy[i]);
+ if (ret < 0)
+ goto err_phy;
+
+ ret = phy_power_on(phy[i]);
+ if (ret < 0) {
+ phy_exit(phy[i]);
+ goto err_phy;
+ }
+ }
+
+ dra7xx->base = base;
+ dra7xx->phy = phy;
+ dra7xx->dev = dev;
+ dra7xx->phy_count = phy_count;
+
+ pm_runtime_enable(dev);
+ ret = pm_runtime_get_sync(dev);
+ if (IS_ERR_VALUE(ret)) {
+ dev_err(dev, "pm_runtime_get_sync failed\n");
+ goto err_phy;
+ }
+
+ reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD);
+ reg &= ~LTSSM_EN;
+ dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD, reg);
+
+ platform_set_drvdata(pdev, dra7xx);
+
+ ret = add_pcie_port(dra7xx, pdev);
+ if (ret < 0)
+ goto err_add_port;
+
+ return 0;
+
+err_add_port:
+ pm_runtime_put(dev);
+ pm_runtime_disable(dev);
+
+err_phy:
+ while (--i >= 0) {
+ phy_power_off(phy[i]);
+ phy_exit(phy[i]);
+ }
+
+ return ret;
+}
+
+static int __exit dra7xx_pcie_remove(struct platform_device *pdev)
+{
+ struct dra7xx_pcie *dra7xx = platform_get_drvdata(pdev);
+ struct pcie_port *pp = &dra7xx->pp;
+ struct device *dev = &pdev->dev;
+ int count = dra7xx->phy_count;
+
+ if (pp->irq_domain)
+ irq_domain_remove(pp->irq_domain);
+ pm_runtime_put(dev);
+ pm_runtime_disable(dev);
+ while (count--) {
+ phy_power_off(dra7xx->phy[count]);
+ phy_exit(dra7xx->phy[count]);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id of_dra7xx_pcie_match[] = {
+ { .compatible = "ti,dra7-pcie", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_dra7xx_pcie_match);
+
+static struct platform_driver dra7xx_pcie_driver = {
+ .remove = __exit_p(dra7xx_pcie_remove),
+ .driver = {
+ .name = "dra7-pcie",
+ .owner = THIS_MODULE,
+ .of_match_table = of_dra7xx_pcie_match,
+ },
+};
+
+module_platform_driver_probe(dra7xx_pcie_driver, dra7xx_pcie_probe);
+
+MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@ti.com>");
+MODULE_DESCRIPTION("TI PCIe controller driver");
+MODULE_LICENSE("GPL v2");
*/
#include <linux/clk.h>
+#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/interrupt.h>
unsigned int num_supplies;
const struct tegra_pcie_soc_data *soc_data;
+ struct dentry *debugfs;
};
struct tegra_pcie_port {
};
MODULE_DEVICE_TABLE(of, tegra_pcie_of_match);
+static void *tegra_pcie_ports_seq_start(struct seq_file *s, loff_t *pos)
+{
+ struct tegra_pcie *pcie = s->private;
+
+ if (list_empty(&pcie->ports))
+ return NULL;
+
+ seq_printf(s, "Index Status\n");
+
+ return seq_list_start(&pcie->ports, *pos);
+}
+
+static void *tegra_pcie_ports_seq_next(struct seq_file *s, void *v, loff_t *pos)
+{
+ struct tegra_pcie *pcie = s->private;
+
+ return seq_list_next(v, &pcie->ports, pos);
+}
+
+static void tegra_pcie_ports_seq_stop(struct seq_file *s, void *v)
+{
+}
+
+static int tegra_pcie_ports_seq_show(struct seq_file *s, void *v)
+{
+ bool up = false, active = false;
+ struct tegra_pcie_port *port;
+ unsigned int value;
+
+ port = list_entry(v, struct tegra_pcie_port, list);
+
+ value = readl(port->base + RP_VEND_XP);
+
+ if (value & RP_VEND_XP_DL_UP)
+ up = true;
+
+ value = readl(port->base + RP_LINK_CONTROL_STATUS);
+
+ if (value & RP_LINK_CONTROL_STATUS_DL_LINK_ACTIVE)
+ active = true;
+
+ seq_printf(s, "%2u ", port->index);
+
+ if (up)
+ seq_printf(s, "up");
+
+ if (active) {
+ if (up)
+ seq_printf(s, ", ");
+
+ seq_printf(s, "active");
+ }
+
+ seq_printf(s, "\n");
+ return 0;
+}
+
+static const struct seq_operations tegra_pcie_ports_seq_ops = {
+ .start = tegra_pcie_ports_seq_start,
+ .next = tegra_pcie_ports_seq_next,
+ .stop = tegra_pcie_ports_seq_stop,
+ .show = tegra_pcie_ports_seq_show,
+};
+
+static int tegra_pcie_ports_open(struct inode *inode, struct file *file)
+{
+ struct tegra_pcie *pcie = inode->i_private;
+ struct seq_file *s;
+ int err;
+
+ err = seq_open(file, &tegra_pcie_ports_seq_ops);
+ if (err)
+ return err;
+
+ s = file->private_data;
+ s->private = pcie;
+
+ return 0;
+}
+
+static const struct file_operations tegra_pcie_ports_ops = {
+ .owner = THIS_MODULE,
+ .open = tegra_pcie_ports_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+static int tegra_pcie_debugfs_init(struct tegra_pcie *pcie)
+{
+ struct dentry *file;
+
+ pcie->debugfs = debugfs_create_dir("pcie", NULL);
+ if (!pcie->debugfs)
+ return -ENOMEM;
+
+ file = debugfs_create_file("ports", S_IFREG | S_IRUGO, pcie->debugfs,
+ pcie, &tegra_pcie_ports_ops);
+ if (!file)
+ goto remove;
+
+ return 0;
+
+remove:
+ debugfs_remove_recursive(pcie->debugfs);
+ pcie->debugfs = NULL;
+ return -ENOMEM;
+}
+
static int tegra_pcie_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
goto disable_msi;
}
+ if (IS_ENABLED(CONFIG_DEBUG_FS)) {
+ err = tegra_pcie_debugfs_init(pcie);
+ if (err < 0)
+ dev_err(&pdev->dev, "failed to setup debugfs: %d\n",
+ err);
+ }
+
platform_set_drvdata(pdev, pcie);
return 0;
#include <linux/of_pci.h>
#include <linux/pci.h>
#include <linux/pci_regs.h>
+#include <linux/platform_device.h>
#include <linux/types.h>
#include "pcie-designware.h"
return 0;
}
+static void dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
+{
+ unsigned int res, bit, val;
+
+ res = (irq / 32) * 12;
+ bit = irq % 32;
+ dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
+ val &= ~(1 << bit);
+ dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+}
+
static void clear_irq_range(struct pcie_port *pp, unsigned int irq_base,
unsigned int nvec, unsigned int pos)
{
- unsigned int i, res, bit, val;
+ unsigned int i;
for (i = 0; i < nvec; i++) {
irq_set_msi_desc_off(irq_base, i, NULL);
clear_bit(pos + i, pp->msi_irq_in_use);
/* Disable corresponding interrupt on MSI controller */
- res = ((pos + i) / 32) * 12;
- bit = (pos + i) % 32;
- dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
- val &= ~(1 << bit);
- dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+ if (pp->ops->msi_clear_irq)
+ pp->ops->msi_clear_irq(pp, pos + i);
+ else
+ dw_pcie_msi_clear_irq(pp, pos + i);
}
}
+static void dw_pcie_msi_set_irq(struct pcie_port *pp, int irq)
+{
+ unsigned int res, bit, val;
+
+ res = (irq / 32) * 12;
+ bit = irq % 32;
+ dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
+ val |= 1 << bit;
+ dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+}
+
static int assign_irq(int no_irqs, struct msi_desc *desc, int *pos)
{
- int res, bit, irq, pos0, pos1, i;
- u32 val;
+ int irq, pos0, pos1, i;
struct pcie_port *pp = sys_to_pcie(desc->dev->bus->sysdata);
if (!pp) {
}
set_bit(pos0 + i, pp->msi_irq_in_use);
/*Enable corresponding interrupt in MSI interrupt controller */
- res = ((pos0 + i) / 32) * 12;
- bit = (pos0 + i) % 32;
- dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
- val |= 1 << bit;
- dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+ if (pp->ops->msi_set_irq)
+ pp->ops->msi_set_irq(pp, pos0 + i);
+ else
+ dw_pcie_msi_set_irq(pp, pos0 + i);
}
*pos = pos0;
*/
desc->msi_attrib.multiple = msgvec;
- msg.address_lo = virt_to_phys((void *)pp->msi_data);
+ if (pp->ops->get_msi_data)
+ msg.address_lo = pp->ops->get_msi_data(pp);
+ else
+ msg.address_lo = virt_to_phys((void *)pp->msi_data);
msg.address_hi = 0x0;
msg.data = pos;
write_msi_msg(irq, &msg);
int __init dw_pcie_host_init(struct pcie_port *pp)
{
struct device_node *np = pp->dev->of_node;
+ struct platform_device *pdev = to_platform_device(pp->dev);
struct of_pci_range range;
struct of_pci_range_parser parser;
- u32 val;
- int i;
+ struct resource *cfg_res;
+ u32 val, na, ns;
+ const __be32 *addrp;
+ int i, index;
+
+ /* Find the address cell size and the number of cells in order to get
+ * the untranslated address.
+ */
+ of_property_read_u32(np, "#address-cells", &na);
+ ns = of_n_size_cells(np);
+
+ cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config");
+ if (cfg_res) {
+ pp->config.cfg0_size = resource_size(cfg_res)/2;
+ pp->config.cfg1_size = resource_size(cfg_res)/2;
+ pp->cfg0_base = cfg_res->start;
+ pp->cfg1_base = cfg_res->start + pp->config.cfg0_size;
+
+ /* Find the untranslated configuration space address */
+ index = of_property_match_string(np, "reg-names", "config");
+ addrp = of_get_address(np, index, false, false);
+ pp->cfg0_mod_base = of_read_number(addrp, ns);
+ pp->cfg1_mod_base = pp->cfg0_mod_base + pp->config.cfg0_size;
+ } else {
+ dev_err(pp->dev, "missing *config* reg space\n");
+ }
if (of_pci_range_parser_init(&parser, np)) {
dev_err(pp->dev, "missing ranges property\n");
pp->config.io_size = resource_size(&pp->io);
pp->config.io_bus_addr = range.pci_addr;
pp->io_base = range.cpu_addr;
+
+ /* Find the untranslated IO space address */
+ pp->io_mod_base = of_read_number(parser.range -
+ parser.np + na, ns);
}
if (restype == IORESOURCE_MEM) {
of_pci_range_to_resource(&range, np, &pp->mem);
pp->mem.name = "MEM";
pp->config.mem_size = resource_size(&pp->mem);
pp->config.mem_bus_addr = range.pci_addr;
+
+ /* Find the untranslated MEM space address */
+ pp->mem_mod_base = of_read_number(parser.range -
+ parser.np + na, ns);
}
if (restype == 0) {
of_pci_range_to_resource(&range, np, &pp->cfg);
pp->config.cfg0_size = resource_size(&pp->cfg)/2;
pp->config.cfg1_size = resource_size(&pp->cfg)/2;
+ pp->cfg0_base = pp->cfg.start;
+ pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
+
+ /* Find the untranslated configuration space address */
+ pp->cfg0_mod_base = of_read_number(parser.range -
+ parser.np + na, ns);
+ pp->cfg1_mod_base = pp->cfg0_mod_base +
+ pp->config.cfg0_size;
}
}
}
}
- pp->cfg0_base = pp->cfg.start;
- pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
pp->mem_base = pp->mem.start;
pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,
/* Program viewport 0 : OUTBOUND : CFG0 */
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
PCIE_ATU_VIEWPORT);
- dw_pcie_writel_rc(pp, pp->cfg0_base, PCIE_ATU_LOWER_BASE);
- dw_pcie_writel_rc(pp, (pp->cfg0_base >> 32), PCIE_ATU_UPPER_BASE);
- dw_pcie_writel_rc(pp, pp->cfg0_base + pp->config.cfg0_size - 1,
+ dw_pcie_writel_rc(pp, pp->cfg0_mod_base, PCIE_ATU_LOWER_BASE);
+ dw_pcie_writel_rc(pp, (pp->cfg0_mod_base >> 32), PCIE_ATU_UPPER_BASE);
+ dw_pcie_writel_rc(pp, pp->cfg0_mod_base + pp->config.cfg0_size - 1,
PCIE_ATU_LIMIT);
dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
PCIE_ATU_VIEWPORT);
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
- dw_pcie_writel_rc(pp, pp->cfg1_base, PCIE_ATU_LOWER_BASE);
- dw_pcie_writel_rc(pp, (pp->cfg1_base >> 32), PCIE_ATU_UPPER_BASE);
- dw_pcie_writel_rc(pp, pp->cfg1_base + pp->config.cfg1_size - 1,
+ dw_pcie_writel_rc(pp, pp->cfg1_mod_base, PCIE_ATU_LOWER_BASE);
+ dw_pcie_writel_rc(pp, (pp->cfg1_mod_base >> 32), PCIE_ATU_UPPER_BASE);
+ dw_pcie_writel_rc(pp, pp->cfg1_mod_base + pp->config.cfg1_size - 1,
PCIE_ATU_LIMIT);
dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
PCIE_ATU_VIEWPORT);
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1);
- dw_pcie_writel_rc(pp, pp->mem_base, PCIE_ATU_LOWER_BASE);
- dw_pcie_writel_rc(pp, (pp->mem_base >> 32), PCIE_ATU_UPPER_BASE);
- dw_pcie_writel_rc(pp, pp->mem_base + pp->config.mem_size - 1,
+ dw_pcie_writel_rc(pp, pp->mem_mod_base, PCIE_ATU_LOWER_BASE);
+ dw_pcie_writel_rc(pp, (pp->mem_mod_base >> 32), PCIE_ATU_UPPER_BASE);
+ dw_pcie_writel_rc(pp, pp->mem_mod_base + pp->config.mem_size - 1,
PCIE_ATU_LIMIT);
dw_pcie_writel_rc(pp, pp->config.mem_bus_addr, PCIE_ATU_LOWER_TARGET);
dw_pcie_writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr),
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
PCIE_ATU_VIEWPORT);
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1);
- dw_pcie_writel_rc(pp, pp->io_base, PCIE_ATU_LOWER_BASE);
- dw_pcie_writel_rc(pp, (pp->io_base >> 32), PCIE_ATU_UPPER_BASE);
- dw_pcie_writel_rc(pp, pp->io_base + pp->config.io_size - 1,
+ dw_pcie_writel_rc(pp, pp->io_mod_base, PCIE_ATU_LOWER_BASE);
+ dw_pcie_writel_rc(pp, (pp->io_mod_base >> 32), PCIE_ATU_UPPER_BASE);
+ dw_pcie_writel_rc(pp, pp->io_mod_base + pp->config.io_size - 1,
PCIE_ATU_LIMIT);
dw_pcie_writel_rc(pp, pp->config.io_bus_addr, PCIE_ATU_LOWER_TARGET);
dw_pcie_writel_rc(pp, upper_32_bits(pp->config.io_bus_addr),
}
if (bus->number != pp->root_bus_nr)
- ret = dw_pcie_rd_other_conf(pp, bus, devfn,
+ if (pp->ops->rd_other_conf)
+ ret = pp->ops->rd_other_conf(pp, bus, devfn,
+ where, size, val);
+ else
+ ret = dw_pcie_rd_other_conf(pp, bus, devfn,
where, size, val);
else
ret = dw_pcie_rd_own_conf(pp, where, size, val);
return PCIBIOS_DEVICE_NOT_FOUND;
if (bus->number != pp->root_bus_nr)
- ret = dw_pcie_wr_other_conf(pp, bus, devfn,
+ if (pp->ops->wr_other_conf)
+ ret = pp->ops->wr_other_conf(pp, bus, devfn,
+ where, size, val);
+ else
+ ret = dw_pcie_wr_other_conf(pp, bus, devfn,
where, size, val);
else
ret = dw_pcie_wr_own_conf(pp, where, size, val);
u8 root_bus_nr;
void __iomem *dbi_base;
u64 cfg0_base;
+ u64 cfg0_mod_base;
void __iomem *va_cfg0_base;
u64 cfg1_base;
+ u64 cfg1_mod_base;
void __iomem *va_cfg1_base;
u64 io_base;
+ u64 io_mod_base;
u64 mem_base;
+ u64 mem_mod_base;
struct resource cfg;
struct resource io;
struct resource mem;
u32 val, void __iomem *dbi_base);
int (*rd_own_conf)(struct pcie_port *pp, int where, int size, u32 *val);
int (*wr_own_conf)(struct pcie_port *pp, int where, int size, u32 val);
+ int (*rd_other_conf)(struct pcie_port *pp, struct pci_bus *bus,
+ unsigned int devfn, int where, int size, u32 *val);
+ int (*wr_other_conf)(struct pcie_port *pp, struct pci_bus *bus,
+ unsigned int devfn, int where, int size, u32 val);
int (*link_up)(struct pcie_port *pp);
void (*host_init)(struct pcie_port *pp);
+ void (*msi_set_irq)(struct pcie_port *pp, int irq);
+ void (*msi_clear_irq)(struct pcie_port *pp, int irq);
+ u32 (*get_msi_data)(struct pcie_port *pp);
};
int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val);
If you have a modern Toshiba laptop with a Bluetooth and an
RFKill switch (such as the Portege R500), say Y.
+config TOSHIBA_HAPS
+ tristate "Toshiba HDD Active Protection Sensor"
+ depends on ACPI
+ ---help---
+ This driver adds support for the built-in accelerometer
+ found on recent Toshiba laptops equiped with HID TOS620A
+ device.
+
+ This driver receives ACPI notify events 0x80 when the sensor
+ detects a sudden move or a harsh vibration, as well as an
+ ACPI notify event 0x81 whenever the movement or vibration has
+ been stabilized.
+
+ Also provides sysfs entries to get/set the desired protection
+ level and reseting the HDD protection interface.
+
+ If you have a recent Toshiba laptop with a built-in accelerometer
+ device, say Y.
+
config ACPI_CMPC
tristate "CMPC Laptop Extras"
depends on X86 && ACPI
obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o
obj-$(CONFIG_TOSHIBA_BT_RFKILL) += toshiba_bluetooth.o
+obj-$(CONFIG_TOSHIBA_HAPS) += toshiba_haps.o
obj-$(CONFIG_INTEL_SCU_IPC) += intel_scu_ipc.o
obj-$(CONFIG_INTEL_SCU_IPC_UTIL) += intel_scu_ipcutil.o
obj-$(CONFIG_INTEL_MFLD_THERMAL) += intel_mid_thermal.o
WMID_ACCEL_EVENT = 0x5,
};
-static const struct key_entry acer_wmi_keymap[] = {
+static const struct key_entry acer_wmi_keymap[] __initconst = {
{KE_KEY, 0x01, {KEY_WLAN} }, /* WiFi */
{KE_KEY, 0x03, {KEY_WLAN} }, /* WiFi */
{KE_KEY, 0x04, {KEY_WLAN} }, /* WiFi */
static struct quirk_entry *quirks;
-static void set_quirks(void)
+static void __init set_quirks(void)
{
if (!interface)
return;
interface->capability |= ACER_CAP_BRIGHTNESS;
}
-static int dmi_matched(const struct dmi_system_id *dmi)
+static int __init dmi_matched(const struct dmi_system_id *dmi)
{
quirks = dmi->driver_data;
return 1;
};
/* The Aspire One has a dummy ACPI-WMI interface - disable it */
-static struct dmi_system_id acer_blacklist[] = {
+static const struct dmi_system_id acer_blacklist[] __initconst = {
{
.ident = "Acer Aspire One (SSD)",
.matches = {
{}
};
-static struct dmi_system_id acer_quirks[] = {
+static const struct dmi_system_id acer_quirks[] __initconst = {
{
.callback = dmi_matched,
.ident = "Acer Aspire 1360",
{}
};
-static int video_set_backlight_video_vendor(const struct dmi_system_id *d)
+static int __init
+video_set_backlight_video_vendor(const struct dmi_system_id *d)
{
interface->capability &= ~ACER_CAP_BRIGHTNESS;
pr_info("Brightness must be controlled by generic video driver\n");
return 0;
}
-static const struct dmi_system_id video_vendor_dmi_table[] = {
+static const struct dmi_system_id video_vendor_dmi_table[] __initconst = {
{
.callback = video_set_backlight_video_vendor,
.ident = "Acer TravelMate 4750",
};
/* Find which quirks are needed for a particular vendor/ model pair */
-static void find_quirks(void)
+static void __init find_quirks(void)
{
if (!force_series) {
dmi_check_system(acer_quirks);
return wmab_execute(&args, NULL);
}
-static acpi_status AMW0_find_mailled(void)
+static acpi_status __init AMW0_find_mailled(void)
{
struct wmab_args args;
struct wmab_ret ret;
return AE_OK;
}
-static int AMW0_set_cap_acpi_check_device_found;
+static int AMW0_set_cap_acpi_check_device_found __initdata;
-static acpi_status AMW0_set_cap_acpi_check_device_cb(acpi_handle handle,
+static acpi_status __init AMW0_set_cap_acpi_check_device_cb(acpi_handle handle,
u32 level, void *context, void **retval)
{
AMW0_set_cap_acpi_check_device_found = 1;
return AE_OK;
}
-static const struct acpi_device_id norfkill_ids[] = {
+static const struct acpi_device_id norfkill_ids[] __initconst = {
{ "VPC2004", 0},
{ "IBM0068", 0},
{ "LEN0068", 0},
{ "", 0},
};
-static int AMW0_set_cap_acpi_check_device(void)
+static int __init AMW0_set_cap_acpi_check_device(void)
{
const struct acpi_device_id *id;
return AMW0_set_cap_acpi_check_device_found;
}
-static acpi_status AMW0_set_capabilities(void)
+static acpi_status __init AMW0_set_capabilities(void)
{
struct wmab_args args;
struct wmab_ret ret;
return wmid3_set_device_status(value, device);
}
-static void type_aa_dmi_decode(const struct dmi_header *header, void *dummy)
+static void __init type_aa_dmi_decode(const struct dmi_header *header, void *d)
{
struct hotkey_function_type_aa *type_aa;
commun_fn_key_number = type_aa->commun_fn_key_number;
}
-static acpi_status WMID_set_capabilities(void)
+static acpi_status __init WMID_set_capabilities(void)
{
struct acpi_buffer out = {ACPI_ALLOCATE_BUFFER, NULL};
union acpi_object *obj;
u32 result; \
acpi_status status;
- pr_info("This threeg sysfs will be removed in 2012 - used by: %s\n",
+ pr_info("This threeg sysfs will be removed in 2014 - used by: %s\n",
current->comm);
status = get_u32(&result, ACER_CAP_THREEG);
if (ACPI_SUCCESS(status))
{
u32 tmp = simple_strtoul(buf, NULL, 10);
acpi_status status = set_u32(tmp, ACER_CAP_THREEG);
- pr_info("This threeg sysfs will be removed in 2012 - used by: %s\n",
+ pr_info("This threeg sysfs will be removed in 2014 - used by: %s\n",
current->comm);
if (ACPI_FAILURE(status))
return -EINVAL;
static ssize_t show_interface(struct device *dev, struct device_attribute *attr,
char *buf)
{
- pr_info("This interface sysfs will be removed in 2012 - used by: %s\n",
+ pr_info("This interface sysfs will be removed in 2014 - used by: %s\n",
current->comm);
switch (interface->type) {
case ACER_AMW0:
}
}
-static acpi_status
+static acpi_status __init
wmid3_set_lm_mode(struct lm_input_params *params,
struct lm_return_value *return_value)
{
return status;
}
-static int acer_wmi_enable_ec_raw(void)
+static int __init acer_wmi_enable_ec_raw(void)
{
struct lm_return_value return_value;
acpi_status status;
return status;
}
-static int acer_wmi_enable_lm(void)
+static int __init acer_wmi_enable_lm(void)
{
struct lm_return_value return_value;
acpi_status status;
return 0;
}
+#ifdef CONFIG_PM_SLEEP
static int acer_suspend(struct device *dev)
{
u32 value;
return 0;
}
+#else
+#define acer_suspend NULL
+#define acer_resume NULL
+#endif
static SIMPLE_DEV_PM_OPS(acer_pm, acer_suspend, acer_resume);
return 0;
}
-static int create_sysfs(void)
+static int __init create_sysfs(void)
{
int retval = -ENOMEM;
debugfs_remove(interface->debug.root);
}
-static int create_debugfs(void)
+static int __init create_debugfs(void)
{
interface->debug.root = debugfs_create_dir("acer-wmi", NULL);
if (!interface->debug.root) {
struct quirk_entry {
u8 num_zones;
+ u8 hdmi_mux;
};
static struct quirk_entry *quirks;
static struct quirk_entry quirk_unknown = {
.num_zones = 2,
+ .hdmi_mux = 0,
};
static struct quirk_entry quirk_x51_family = {
.num_zones = 3,
+ .hdmi_mux = 0.
};
-static int dmi_matched(const struct dmi_system_id *dmi)
+static struct quirk_entry quirk_asm100 = {
+ .num_zones = 2,
+ .hdmi_mux = 1,
+};
+
+static int __init dmi_matched(const struct dmi_system_id *dmi)
{
quirks = dmi->driver_data;
return 1;
}
-static struct dmi_system_id alienware_quirks[] = {
+static const struct dmi_system_id alienware_quirks[] __initconst = {
{
.callback = dmi_matched,
.ident = "Alienware X51 R1",
},
.driver_data = &quirk_x51_family,
},
+ {
+ .callback = dmi_matched,
+ .ident = "Alienware ASM100",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ASM100"),
+ },
+ .driver_data = &quirk_asm100,
+ },
{}
};
static void remove_hdmi(struct platform_device *dev)
{
- sysfs_remove_group(&dev->dev.kobj, &hdmi_attribute_group);
+ if (quirks->hdmi_mux > 0)
+ sysfs_remove_group(&dev->dev.kobj, &hdmi_attribute_group);
}
static int create_hdmi(struct platform_device *dev)
if (ret)
goto fail_platform_device2;
- if (interface == WMAX) {
+ if (quirks->hdmi_mux > 0) {
ret = create_hdmi(platform_device);
if (ret)
goto fail_prep_hdmi;
.no_display_toggle = true,
};
-static struct quirk_entry quirk_asus_x401u = {
+static struct quirk_entry quirk_asus_wapf4 = {
.wapf = 4,
};
+static struct quirk_entry quirk_asus_x200ca = {
+ .wapf = 2,
+};
+
static int dmi_matched(const struct dmi_system_id *dmi)
{
quirks = dmi->driver_data;
return 1;
}
-static struct dmi_system_id asus_quirks[] = {
+static const struct dmi_system_id asus_quirks[] = {
+ {
+ .callback = dmi_matched,
+ .ident = "ASUSTeK COMPUTER INC. U32U",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "U32U"),
+ },
+ /*
+ * Note this machine has a Brazos APU, and most Brazos Asus
+ * machines need quirk_asus_x55u / wmi_backlight_power but
+ * here acpi-video seems to work fine for backlight control.
+ */
+ .driver_data = &quirk_asus_wapf4,
+ },
{
.callback = dmi_matched,
.ident = "ASUSTeK COMPUTER INC. X401U",
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "X401A"),
},
- .driver_data = &quirk_asus_x401u,
+ .driver_data = &quirk_asus_wapf4,
},
{
.callback = dmi_matched,
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "X401A1"),
},
- .driver_data = &quirk_asus_x401u,
+ .driver_data = &quirk_asus_wapf4,
},
{
.callback = dmi_matched,
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "X501A"),
},
- .driver_data = &quirk_asus_x401u,
+ .driver_data = &quirk_asus_wapf4,
},
{
.callback = dmi_matched,
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "X501A1"),
},
- .driver_data = &quirk_asus_x401u,
+ .driver_data = &quirk_asus_wapf4,
},
{
.callback = dmi_matched,
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "X550CA"),
},
- .driver_data = &quirk_asus_x401u,
+ .driver_data = &quirk_asus_wapf4,
+ },
+ {
+ .callback = dmi_matched,
+ .ident = "ASUSTeK COMPUTER INC. X550CC",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X550CC"),
+ },
+ .driver_data = &quirk_asus_wapf4,
+ },
+ {
+ .callback = dmi_matched,
+ .ident = "ASUSTeK COMPUTER INC. X550CL",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X550CL"),
+ },
+ .driver_data = &quirk_asus_wapf4,
},
{
.callback = dmi_matched,
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "X55A"),
},
- .driver_data = &quirk_asus_x401u,
+ .driver_data = &quirk_asus_wapf4,
},
{
.callback = dmi_matched,
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "X55C"),
},
- .driver_data = &quirk_asus_x401u,
+ .driver_data = &quirk_asus_wapf4,
},
{
.callback = dmi_matched,
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "X55VD"),
},
- .driver_data = &quirk_asus_x401u,
+ .driver_data = &quirk_asus_wapf4,
},
{
.callback = dmi_matched,
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "X75A"),
},
- .driver_data = &quirk_asus_x401u,
+ .driver_data = &quirk_asus_wapf4,
+ },
+ {
+ .callback = dmi_matched,
+ .ident = "ASUSTeK COMPUTER INC. X75VBP",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X75VBP"),
+ },
+ .driver_data = &quirk_asus_wapf4,
},
{
.callback = dmi_matched,
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "1015E"),
},
- .driver_data = &quirk_asus_x401u,
+ .driver_data = &quirk_asus_wapf4,
},
{
.callback = dmi_matched,
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "1015U"),
},
- .driver_data = &quirk_asus_x401u,
+ .driver_data = &quirk_asus_wapf4,
+ },
+ {
+ .callback = dmi_matched,
+ .ident = "ASUSTeK COMPUTER INC. X200CA",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X200CA"),
+ },
+ .driver_data = &quirk_asus_x200ca,
},
{},
};
#include <linux/platform_device.h>
#include <linux/thermal.h>
#include <linux/acpi.h>
+#include <linux/dmi.h>
#include <acpi/video.h>
#include "asus-wmi.h"
goto error;
}
- if (wlan_led_presence(asus) && (asus->driver->quirks->wapf == 4)) {
+ if (wlan_led_presence(asus) && (asus->driver->quirks->wapf > 0)) {
INIT_WORK(&asus->wlan_led_work, wlan_led_update);
asus->wlan_led.name = "asus::wlan";
return -EINVAL;
if ((dev_id == ASUS_WMI_DEVID_WLAN) &&
- (asus->driver->quirks->wapf == 4))
+ (asus->driver->quirks->wapf > 0))
rfkill_set_led_trigger_name(*rfkill, "asus-wlan");
rfkill_init_sw_state(*rfkill, !result);
int power;
max = read_brightness_max(asus);
-
- if (max == -ENODEV)
- max = 0;
- else if (max < 0)
+ if (max < 0)
return max;
power = read_backlight_power(asus);
struct platform_driver *pdrv = to_platform_driver(pdev->dev.driver);
struct asus_wmi_driver *wdrv = to_asus_wmi_driver(pdrv);
struct asus_wmi *asus;
+ const char *chassis_type;
acpi_status status;
int err;
u32 result;
if (err)
goto fail_rfkill;
+ /* Some Asus desktop boards export an acpi-video backlight interface,
+ stop this from showing up */
+ chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE);
+ if (chassis_type && !strcmp(chassis_type, "3"))
+ acpi_video_dmi_promote_vendor();
if (asus->driver->quirks->wmi_backlight_power)
acpi_video_dmi_promote_vendor();
if (!acpi_video_backlight_support()) {
return err;
hwmon_dev = hwmon_device_register_with_groups(&pdev->dev,
- DRIVER_NAME, data,
+ "compal", data,
compal_hwmon_groups);
if (IS_ERR(hwmon_dev)) {
err = PTR_ERR(hwmon_dev);
.touchpad_led = 1,
};
-static int dmi_matched(const struct dmi_system_id *dmi)
+static int __init dmi_matched(const struct dmi_system_id *dmi)
{
quirks = dmi->driver_data;
return 1;
};
MODULE_DEVICE_TABLE(dmi, dell_device_table);
-static struct dmi_system_id dell_quirks[] = {
+static const struct dmi_system_id dell_quirks[] __initconst = {
{
.callback = dmi_matched,
.ident = "Dell Vostro V130",
.flags = LED_CORE_SUSPENDRESUME,
};
-static int touchpad_led_init(struct device *dev)
+static int __init touchpad_led_init(struct device *dev)
{
return led_classdev_register(dev, &touchpad_led);
}
return sprintf(buf, "%d\n", get());
}
-#define EEEPC_CREATE_SENSOR_ATTR(_name, _mode, _set, _get) \
+#define EEEPC_CREATE_SENSOR_ATTR(_name, _mode, _get, _set) \
static ssize_t show_##_name(struct device *dev, \
struct device_attribute *attr, \
char *buf) \
{ \
- return show_sys_hwmon(_set, buf); \
+ return show_sys_hwmon(_get, buf); \
} \
static ssize_t store_##_name(struct device *dev, \
struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
- return store_sys_hwmon(_get, buf, count); \
+ return store_sys_hwmon(_set, buf, count); \
} \
- static DEVICE_ATTR(_name, _mode, show_##_name, store_##_name);
+ static DEVICE_ATTR(_name, _mode, show_##_name, store_##_name)
EEEPC_CREATE_SENSOR_ATTR(fan1_input, S_IRUGO, eeepc_get_fan_rpm, NULL);
EEEPC_CREATE_SENSOR_ATTR(pwm1, S_IRUGO | S_IWUSR,
return 1;
}
-static struct dmi_system_id asus_quirks[] = {
+static const struct dmi_system_id asus_quirks[] = {
{
.callback = dmi_matched,
.ident = "ASUSTeK Computer INC. 1000H",
#define FUJLAPTOP_DBG_INFO 0x0004
#define FUJLAPTOP_DBG_TRACE 0x0008
-#define dbg_printk(a_dbg_level, format, arg...) \
+#ifdef CONFIG_FUJITSU_LAPTOP_DEBUG
+#define vdbg_printk(a_dbg_level, format, arg...) \
do { if (dbg_level & a_dbg_level) \
printk(FUJLAPTOP_DEBUG "%s: " format, __func__ , ## arg); \
} while (0)
-#ifdef CONFIG_FUJITSU_LAPTOP_DEBUG
-#define vdbg_printk(a_dbg_level, format, arg...) \
- dbg_printk(a_dbg_level, format, ## arg)
#else
-#define vdbg_printk(a_dbg_level, format, arg...)
+#define vdbg_printk(a_dbg_level, format, arg...) \
+ do { } while (0)
#endif
/* Device controlling the backlight and associated keys */
}
};
-static void dmi_check_cb_common(const struct dmi_system_id *id)
+static void __init dmi_check_cb_common(const struct dmi_system_id *id)
{
pr_info("Identified laptop model '%s'\n", id->ident);
if (use_alt_lcd_levels == -1) {
}
}
-static int dmi_check_cb_s6410(const struct dmi_system_id *id)
+static int __init dmi_check_cb_s6410(const struct dmi_system_id *id)
{
dmi_check_cb_common(id);
fujitsu->keycode1 = KEY_SCREENLOCK; /* "Lock" */
return 1;
}
-static int dmi_check_cb_s6420(const struct dmi_system_id *id)
+static int __init dmi_check_cb_s6420(const struct dmi_system_id *id)
{
dmi_check_cb_common(id);
fujitsu->keycode1 = KEY_SCREENLOCK; /* "Lock" */
return 1;
}
-static int dmi_check_cb_p8010(const struct dmi_system_id *id)
+static int __init dmi_check_cb_p8010(const struct dmi_system_id *id)
{
dmi_check_cb_common(id);
fujitsu->keycode1 = KEY_HELP; /* "Support" */
return 1;
}
-static struct dmi_system_id fujitsu_dmi_table[] = {
+static const struct dmi_system_id fujitsu_dmi_table[] __initconst = {
{
.ident = "Fujitsu Siemens S6410",
.matches = {
return IRQ_HANDLED;
}
-static void fujitsu_dmi_common(const struct dmi_system_id *dmi)
+static void __init fujitsu_dmi_common(const struct dmi_system_id *dmi)
{
pr_info("%s\n", dmi->ident);
memcpy(fujitsu.config.keymap, dmi->driver_data,
sizeof(fujitsu.config.keymap));
}
-static int fujitsu_dmi_lifebook(const struct dmi_system_id *dmi)
+static int __init fujitsu_dmi_lifebook(const struct dmi_system_id *dmi)
{
fujitsu_dmi_common(dmi);
fujitsu.config.quirks |= INVERT_TABLET_MODE_BIT;
return 1;
}
-static int fujitsu_dmi_stylistic(const struct dmi_system_id *dmi)
+static int __init fujitsu_dmi_stylistic(const struct dmi_system_id *dmi)
{
fujitsu_dmi_common(dmi);
fujitsu.config.quirks |= FORCE_TABLET_MODE_IF_UNDOCK;
return (state & 0x4) ? 1 : 0;
}
-static int hp_wmi_bios_2009_later(void)
+static int __init hp_wmi_bios_2009_later(void)
{
int state = 0;
int ret = hp_wmi_perform_query(HPWMI_FEATURE_QUERY, 0, &state,
device_remove_file(&device->dev, &dev_attr_postcode);
}
-static int hp_wmi_rfkill_setup(struct platform_device *device)
+static int __init hp_wmi_rfkill_setup(struct platform_device *device)
{
int err;
int wireless = 0;
return err;
}
-static int hp_wmi_rfkill2_setup(struct platform_device *device)
+static int __init hp_wmi_rfkill2_setup(struct platform_device *device)
{
int err, i;
struct bios_rfkill2_state state;
/* HP-specific accelerometer driver ------------------------------------ */
/* For automatic insertion of the module */
-static struct acpi_device_id lis3lv02d_device_ids[] = {
+static const struct acpi_device_id lis3lv02d_device_ids[] = {
{"HPQ0004", 0}, /* HP Mobile Data Protection System PNP */
{"HPQ6000", 0}, /* HP Mobile Data Protection System PNP */
{"HPQ6007", 0}, /* HP Mobile Data Protection System PNP */
}, \
.driver_data = &lis3lv02d_axis_##_axis \
}
-static struct dmi_system_id lis3lv02d_dmi_ids[] = {
+static const struct dmi_system_id lis3lv02d_dmi_ids[] = {
/* product names are truncated to match all kinds of a same model */
AXIS_DMI_MATCH("NC64x0", "HP Compaq nc64", x_inverted),
AXIS_DMI_MATCH("NC84x0", "HP Compaq nc84", z_inverted),
struct backlight_device *blightdev;
struct dentry *debug;
unsigned long cfg;
+ bool has_hw_rfkill_switch;
+ bool has_touchpad_control;
};
static bool no_bt_rfkill;
return supported ? attr->mode : 0;
}
-static struct attribute_group ideapad_attribute_group = {
+static const struct attribute_group ideapad_attribute_group = {
.is_visible = ideapad_is_visible,
.attrs = ideapad_attributes
};
int type;
};
-const struct ideapad_rfk_data ideapad_rfk_data[] = {
+const const struct ideapad_rfk_data ideapad_rfk_data[] = {
{ "ideapad_wlan", CFG_WIFI_BIT, VPCCMD_W_WIFI, RFKILL_TYPE_WLAN },
{ "ideapad_bluetooth", CFG_BT_BIT, VPCCMD_W_BT, RFKILL_TYPE_BLUETOOTH },
{ "ideapad_3g", CFG_3G_BIT, VPCCMD_W_3G, RFKILL_TYPE_WWAN },
static void ideapad_sync_rfk_state(struct ideapad_private *priv)
{
- unsigned long hw_blocked;
+ unsigned long hw_blocked = 0;
int i;
- if (read_ec_data(priv->adev->handle, VPCCMD_R_RF, &hw_blocked))
- return;
- hw_blocked = !hw_blocked;
+ if (priv->has_hw_rfkill_switch) {
+ if (read_ec_data(priv->adev->handle, VPCCMD_R_RF, &hw_blocked))
+ return;
+ hw_blocked = !hw_blocked;
+ }
for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++)
if (priv->rfk[i])
{
unsigned long value;
+ if (!priv->has_touchpad_control)
+ return;
+
/* Without reading from EC touchpad LED doesn't switch state */
if (!read_ec_data(priv->adev->handle, VPCCMD_R_TOUCHPAD, &value)) {
/* Some IdeaPads don't really turn off touchpad - they only
}
}
-/* Blacklist for devices where the ideapad rfkill interface does not work */
-static struct dmi_system_id rfkill_blacklist[] = {
- /* The Lenovo Yoga 2 11 always reports everything as blocked */
+/*
+ * Some ideapads don't have a hardware rfkill switch, reading VPCCMD_R_RF
+ * always results in 0 on these models, causing ideapad_laptop to wrongly
+ * report all radios as hardware-blocked.
+ */
+static struct dmi_system_id no_hw_rfkill_list[] = {
{
- .ident = "Lenovo Yoga 2 11",
+ .ident = "Lenovo Yoga 2 11 / 13 / Pro",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Yoga 2 11"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Yoga 2"),
+ },
+ },
+ {}
+};
+
+/*
+ * Some models don't offer touchpad ctrl through the ideapad interface, causing
+ * ideapad_sync_touchpad_state to send wrong touchpad enable/disable events.
+ */
+static struct dmi_system_id no_touchpad_ctrl_list[] = {
+ {
+ .ident = "Lenovo Yoga 1 series",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo IdeaPad Yoga"),
+ },
+ },
+ {
+ .ident = "Lenovo Yoga 2 11 / 13 / Pro",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Yoga 2"),
},
},
{}
priv->cfg = cfg;
priv->adev = adev;
priv->platform_device = pdev;
+ priv->has_hw_rfkill_switch = !dmi_check_system(no_hw_rfkill_list);
+ priv->has_touchpad_control = !dmi_check_system(no_touchpad_ctrl_list);
ret = ideapad_sysfs_init(priv);
if (ret)
if (ret)
goto input_failed;
- if (!dmi_check_system(rfkill_blacklist)) {
- for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++)
- if (test_bit(ideapad_rfk_data[i].cfgbit, &priv->cfg))
- ideapad_register_rfkill(priv, i);
- }
+ /*
+ * On some models without a hw-switch (the yoga 2 13 at least)
+ * VPCCMD_W_RF must be explicitly set to 1 for the wifi to work.
+ */
+ if (!priv->has_hw_rfkill_switch)
+ write_ec_cmd(priv->adev->handle, VPCCMD_W_RF, 1);
+
+ for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++)
+ if (test_bit(ideapad_rfk_data[i].cfgbit, &priv->cfg))
+ ideapad_register_rfkill(priv, i);
+
ideapad_sync_rfk_state(priv);
ideapad_sync_touchpad_state(priv);
/* Max temps are -10 degrees C to avoid PROCHOT# */
-struct ips_mcp_limits ips_sv_limits = {
+static struct ips_mcp_limits ips_sv_limits = {
.mcp_power_limit = 35000,
.core_power_limit = 29000,
.mch_power_limit = 20000,
.mch_temp_limit = 90
};
-struct ips_mcp_limits ips_lv_limits = {
+static struct ips_mcp_limits ips_lv_limits = {
.mcp_power_limit = 25000,
.core_power_limit = 21000,
.mch_power_limit = 13000,
.mch_temp_limit = 90
};
-struct ips_mcp_limits ips_ulv_limits = {
+static struct ips_mcp_limits ips_ulv_limits = {
.mcp_power_limit = 18000,
.core_power_limit = 14000,
.mch_power_limit = 11000,
lid_ctl->attrs[LID_RESUME_S3].store = sony_nc_lid_resume_store;
}
for (i = 0; i < LID_RESUME_MAX &&
- lid_ctl->attrs[LID_RESUME_S3].attr.name; i++) {
+ lid_ctl->attrs[i].attr.name; i++) {
result = device_create_file(&pd->dev, &lid_ctl->attrs[i]);
if (result)
goto liderror;
KEY_UNKNOWN,
/* Extra keys in use since the X240 / T440 / T540 */
- KEY_CONFIG, KEY_SEARCH, KEY_SCALE, KEY_COMPUTER,
+ KEY_CONFIG, KEY_SEARCH, KEY_SCALE, KEY_FILE,
},
};
{
int res;
- if (value > bright_maxlvl || value < 0)
+ if (value > bright_maxlvl)
return -EINVAL;
vdbg_printk(TPACPI_DBG_BRGHT,
return volume_alsa_set_mute(!ucontrol->value.integer.value[0]);
}
-static struct snd_kcontrol_new volume_alsa_control_vol = {
+static struct snd_kcontrol_new volume_alsa_control_vol __initdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Console Playback Volume",
.index = 0,
.get = volume_alsa_vol_get,
};
-static struct snd_kcontrol_new volume_alsa_control_mute = {
+static struct snd_kcontrol_new volume_alsa_control_mute __initdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Console Playback Switch",
.index = 0,
DMI_MATCH(DMI_PRODUCT_NAME, "Satellite M840"),
},
},
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Qosmio X75-A"),
+ },
+ },
{}
};
{ KE_KEY, 0x157, { KEY_MUTE } },
{ KE_KEY, 0x102, { KEY_ZOOMOUT } },
{ KE_KEY, 0x103, { KEY_ZOOMIN } },
+ { KE_KEY, 0x12c, { KEY_KBDILLUMTOGGLE } },
{ KE_KEY, 0x139, { KEY_ZOOMRESET } },
{ KE_KEY, 0x13e, { KEY_SWITCHVIDEOMODE } },
{ KE_KEY, 0x13c, { KEY_BRIGHTNESSDOWN } },
static int set_lcd_brightness(struct toshiba_acpi_dev *dev, int value)
{
- u32 hci_result;
+ u32 in[HCI_WORDS] = { HCI_SET, HCI_LCD_BRIGHTNESS, 0, 0, 0, 0 };
+ u32 out[HCI_WORDS];
+ acpi_status status;
if (dev->tr_backlight_supported) {
bool enable = !value;
value--;
}
- value = value << HCI_LCD_BRIGHTNESS_SHIFT;
- hci_write1(dev, HCI_LCD_BRIGHTNESS, value, &hci_result);
- return hci_result == HCI_SUCCESS ? 0 : -EIO;
+ in[2] = value << HCI_LCD_BRIGHTNESS_SHIFT;
+ status = hci_raw(dev, in, out);
+ if (ACPI_FAILURE(status) || out[0] == HCI_FAILURE) {
+ pr_err("ACPI call to set brightness failed");
+ return -EIO;
+ }
+ /* Extra check for "incomplete" backlight method, where the AML code
+ * doesn't check for HCI_SET or HCI_GET and returns HCI_SUCCESS,
+ * the actual brightness, and in some cases the max brightness.
+ */
+ if (out[2] > 0 || out[3] == 0xE000)
+ return -ENODEV;
+
+ return out[0] == HCI_SUCCESS ? 0 : -EIO;
}
static int set_lcd_status(struct backlight_device *bd)
--- /dev/null
+/*
+ * Toshiba HDD Active Protection Sensor (HAPS) driver
+ *
+ * Copyright (C) 2014 Azael Avalos <coproscefalo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/acpi.h>
+
+MODULE_AUTHOR("Azael Avalos <coproscefalo@gmail.com>");
+MODULE_DESCRIPTION("Toshiba HDD Active Protection Sensor");
+MODULE_LICENSE("GPL");
+
+struct toshiba_haps_dev {
+ struct acpi_device *acpi_dev;
+
+ int protection_level;
+};
+
+static struct toshiba_haps_dev *toshiba_haps;
+
+/* HAPS functions */
+static int toshiba_haps_reset_protection(acpi_handle handle)
+{
+ acpi_status status;
+
+ status = acpi_evaluate_object(handle, "RSSS", NULL, NULL);
+ if (ACPI_FAILURE(status)) {
+ pr_err("Unable to reset the HDD protection\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int toshiba_haps_protection_level(acpi_handle handle, int level)
+{
+ acpi_status status;
+
+ status = acpi_execute_simple_method(handle, "PTLV", level);
+ if (ACPI_FAILURE(status)) {
+ pr_err("Error while setting the protection level\n");
+ return -EIO;
+ }
+
+ pr_info("HDD protection level set to: %d\n", level);
+
+ return 0;
+}
+
+/* sysfs files */
+static ssize_t protection_level_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct toshiba_haps_dev *haps = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%i\n", haps->protection_level);
+}
+
+static ssize_t protection_level_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct toshiba_haps_dev *haps = dev_get_drvdata(dev);
+ int level, ret;
+
+ if (sscanf(buf, "%d", &level) != 1 || level < 0 || level > 3)
+ return -EINVAL;
+
+ /* Set the sensor level.
+ * Acceptable levels are:
+ * 0 - Disabled | 1 - Low | 2 - Medium | 3 - High
+ */
+ ret = toshiba_haps_protection_level(haps->acpi_dev->handle, level);
+ if (ret != 0)
+ return ret;
+
+ haps->protection_level = level;
+
+ return count;
+}
+
+static ssize_t reset_protection_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct toshiba_haps_dev *haps = dev_get_drvdata(dev);
+ int reset, ret;
+
+ if (sscanf(buf, "%d", &reset) != 1 || reset != 1)
+ return -EINVAL;
+
+ /* Reset the protection interface */
+ ret = toshiba_haps_reset_protection(haps->acpi_dev->handle);
+ if (ret != 0)
+ return ret;
+
+ return count;
+}
+
+static DEVICE_ATTR(protection_level, S_IRUGO | S_IWUSR,
+ protection_level_show, protection_level_store);
+static DEVICE_ATTR(reset_protection, S_IWUSR, NULL, reset_protection_store);
+
+static struct attribute *haps_attributes[] = {
+ &dev_attr_protection_level.attr,
+ &dev_attr_reset_protection.attr,
+ NULL,
+};
+
+static struct attribute_group haps_attr_group = {
+ .attrs = haps_attributes,
+};
+
+/*
+ * ACPI stuff
+ */
+static void toshiba_haps_notify(struct acpi_device *device, u32 event)
+{
+ pr_info("Received event: 0x%x", event);
+
+ acpi_bus_generate_netlink_event(device->pnp.device_class,
+ dev_name(&device->dev),
+ event, 0);
+}
+
+static int toshiba_haps_remove(struct acpi_device *device)
+{
+ sysfs_remove_group(&device->dev.kobj, &haps_attr_group);
+
+ if (toshiba_haps)
+ toshiba_haps = NULL;
+
+ return 0;
+}
+
+/* Helper function */
+static int toshiba_haps_available(acpi_handle handle)
+{
+ acpi_status status;
+ u64 hdd_present;
+
+ /*
+ * A non existent device as well as having (only)
+ * Solid State Drives can cause the call to fail.
+ */
+ status = acpi_evaluate_integer(handle, "_STA", NULL,
+ &hdd_present);
+ if (ACPI_FAILURE(status) || !hdd_present) {
+ pr_info("HDD protection not available or using SSD\n");
+ return 0;
+ }
+
+ return 1;
+}
+
+static int toshiba_haps_add(struct acpi_device *acpi_dev)
+{
+ struct toshiba_haps_dev *haps;
+ int ret;
+
+ if (toshiba_haps)
+ return -EBUSY;
+
+ if (!toshiba_haps_available(acpi_dev->handle))
+ return -ENODEV;
+
+ pr_info("Toshiba HDD Active Protection Sensor device\n");
+
+ haps = kzalloc(sizeof(struct toshiba_haps_dev), GFP_KERNEL);
+ if (!haps)
+ return -ENOMEM;
+
+ haps->acpi_dev = acpi_dev;
+ haps->protection_level = 2;
+ acpi_dev->driver_data = haps;
+ dev_set_drvdata(&acpi_dev->dev, haps);
+
+ /* Set the protection level, currently at level 2 (Medium) */
+ ret = toshiba_haps_protection_level(acpi_dev->handle, 2);
+ if (ret != 0)
+ return ret;
+
+ ret = sysfs_create_group(&acpi_dev->dev.kobj, &haps_attr_group);
+ if (ret)
+ return ret;
+
+ toshiba_haps = haps;
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int toshiba_haps_suspend(struct device *device)
+{
+ struct toshiba_haps_dev *haps;
+ int ret;
+
+ haps = acpi_driver_data(to_acpi_device(device));
+
+ /* Deactivate the protection on suspend */
+ ret = toshiba_haps_protection_level(haps->acpi_dev->handle, 0);
+
+ return ret;
+}
+
+static int toshiba_haps_resume(struct device *device)
+{
+ struct toshiba_haps_dev *haps;
+ int ret;
+
+ haps = acpi_driver_data(to_acpi_device(device));
+
+ /* Set the stored protection level */
+ ret = toshiba_haps_protection_level(haps->acpi_dev->handle,
+ haps->protection_level);
+
+ /* Reset the protection on resume */
+ ret = toshiba_haps_reset_protection(haps->acpi_dev->handle);
+ if (ret != 0)
+ return ret;
+
+ return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(toshiba_haps_pm,
+ toshiba_haps_suspend, toshiba_haps_resume);
+
+static const struct acpi_device_id haps_device_ids[] = {
+ {"TOS620A", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, haps_device_ids);
+
+static struct acpi_driver toshiba_haps_driver = {
+ .name = "Toshiba HAPS",
+ .owner = THIS_MODULE,
+ .ids = haps_device_ids,
+ .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS,
+ .ops = {
+ .add = toshiba_haps_add,
+ .remove = toshiba_haps_remove,
+ .notify = toshiba_haps_notify,
+ },
+ .drv.pm = &toshiba_haps_pm,
+};
+
+module_acpi_driver(toshiba_haps_driver);
block = &wblock->gblock;
handle = wblock->handle;
- if (!block)
- return AE_NOT_EXIST;
-
-
snprintf(method, 5, "WE%02X", block->notify_id);
status = acpi_execute_simple_method(handle, method, enable);
pool->slab_flags |= SLAB_CACHE_DMA;
pool->gfp_mask = __GFP_DMA;
}
+
+ if (hostt->cmd_size)
+ hostt->cmd_pool = pool;
+
return pool;
}
out_free_slab:
kmem_cache_destroy(pool->cmd_slab);
out_free_pool:
- if (hostt->cmd_size)
+ if (hostt->cmd_size) {
scsi_free_host_cmd_pool(pool);
+ hostt->cmd_pool = NULL;
+ }
goto out;
}
if (!--pool->users) {
kmem_cache_destroy(pool->cmd_slab);
kmem_cache_destroy(pool->sense_slab);
- if (hostt->cmd_size)
+ if (hostt->cmd_size) {
scsi_free_host_cmd_pool(pool);
+ hostt->cmd_pool = NULL;
+ }
}
mutex_unlock(&host_cmd_pool_mutex);
}
blk_requeue_request(q, req);
atomic_dec(&sdev->device_busy);
out_delay:
- if (atomic_read(&sdev->device_busy) && !scsi_device_blocked(sdev))
+ if (!atomic_read(&sdev->device_busy) && !scsi_device_blocked(sdev))
blk_delay_queue(q, SCSI_QUEUE_DELAY);
}
}
file->f_flags = O_RDWR;
- file->private_data = ctx;
return file;
}
static const struct dentry_operations ops = {
.d_dname = simple_dname,
};
- return mount_pseudo(fs_type, "aio:", NULL, &ops, 0xa10a10a1);
+ return mount_pseudo(fs_type, "aio:", NULL, &ops, AIO_RING_MAGIC);
}
/* aio_setup
struct aio_ring *ring;
spin_lock(&mm->ioctx_lock);
- rcu_read_lock();
- table = rcu_dereference(mm->ioctx_table);
+ table = rcu_dereference_raw(mm->ioctx_table);
while (1) {
if (table)
if (!table->table[i]) {
ctx->id = i;
table->table[i] = ctx;
- rcu_read_unlock();
spin_unlock(&mm->ioctx_lock);
/* While kioctx setup is in progress,
}
new_nr = (table ? table->nr : 1) * 4;
-
- rcu_read_unlock();
spin_unlock(&mm->ioctx_lock);
table = kzalloc(sizeof(*table) + sizeof(struct kioctx *) *
table->nr = new_nr;
spin_lock(&mm->ioctx_lock);
- rcu_read_lock();
- old = rcu_dereference(mm->ioctx_table);
+ old = rcu_dereference_raw(mm->ioctx_table);
if (!old) {
rcu_assign_pointer(mm->ioctx_table, table);
spin_lock(&mm->ioctx_lock);
- rcu_read_lock();
- table = rcu_dereference(mm->ioctx_table);
-
+ table = rcu_dereference_raw(mm->ioctx_table);
WARN_ON(ctx != table->table[ctx->id]);
table->table[ctx->id] = NULL;
- rcu_read_unlock();
spin_unlock(&mm->ioctx_lock);
/* percpu_ref_kill() will do the necessary call_rcu() */
*/
void exit_aio(struct mm_struct *mm)
{
- struct kioctx_table *table;
- struct kioctx *ctx;
- unsigned i = 0;
-
- while (1) {
- rcu_read_lock();
- table = rcu_dereference(mm->ioctx_table);
-
- do {
- if (!table || i >= table->nr) {
- rcu_read_unlock();
- rcu_assign_pointer(mm->ioctx_table, NULL);
- if (table)
- kfree(table);
- return;
- }
+ struct kioctx_table *table = rcu_dereference_raw(mm->ioctx_table);
+ int i;
- ctx = table->table[i++];
- } while (!ctx);
+ if (!table)
+ return;
- rcu_read_unlock();
+ for (i = 0; i < table->nr; ++i) {
+ struct kioctx *ctx = table->table[i];
+ if (!ctx)
+ continue;
/*
- * We don't need to bother with munmap() here -
- * exit_mmap(mm) is coming and it'll unmap everything.
- * Since aio_free_ring() uses non-zero ->mmap_size
- * as indicator that it needs to unmap the area,
- * just set it to 0; aio_free_ring() is the only
- * place that uses ->mmap_size, so it's safe.
+ * We don't need to bother with munmap() here - exit_mmap(mm)
+ * is coming and it'll unmap everything. And we simply can't,
+ * this is not necessarily our ->mm.
+ * Since kill_ioctx() uses non-zero ->mmap_size as indicator
+ * that it needs to unmap the area, just set it to 0.
*/
ctx->mmap_size = 0;
-
kill_ioctx(mm, ctx, NULL);
}
+
+ RCU_INIT_POINTER(mm->ioctx_table, NULL);
+ kfree(table);
}
static void put_reqs_available(struct kioctx *ctx, unsigned nr)
struct kioctx_cpu *kcpu;
unsigned long flags;
- preempt_disable();
- kcpu = this_cpu_ptr(ctx->cpu);
-
local_irq_save(flags);
+ kcpu = this_cpu_ptr(ctx->cpu);
kcpu->reqs_available += nr;
while (kcpu->reqs_available >= ctx->req_batch * 2) {
}
local_irq_restore(flags);
- preempt_enable();
}
static bool get_reqs_available(struct kioctx *ctx)
bool ret = false;
unsigned long flags;
- preempt_disable();
- kcpu = this_cpu_ptr(ctx->cpu);
-
local_irq_save(flags);
+ kcpu = this_cpu_ptr(ctx->cpu);
if (!kcpu->reqs_available) {
int old, avail = atomic_read(&ctx->reqs_available);
kcpu->reqs_available--;
out:
local_irq_restore(flags);
- preempt_enable();
return ret;
}
}
EXPORT_SYMBOL(aio_complete);
-/* aio_read_events
+/* aio_read_events_ring
* Pull an event off of the ioctx's event ring. Returns the number of
* events fetched
*/
if (compat)
ret = compat_rw_copy_check_uvector(rw,
(struct compat_iovec __user *)buf,
- *nr_segs, 1, *iovec, iovec);
+ *nr_segs, UIO_FASTIOV, *iovec, iovec);
else
#endif
ret = rw_copy_check_uvector(rw,
(struct iovec __user *)buf,
- *nr_segs, 1, *iovec, iovec);
+ *nr_segs, UIO_FASTIOV, *iovec, iovec);
if (ret < 0)
return ret;
}
/*
- * aio_setup_iocb:
- * Performs the initial checks and aio retry method
- * setup for the kiocb at the time of io submission.
+ * aio_run_iocb:
+ * Performs the initial checks and io submission.
*/
static ssize_t aio_run_iocb(struct kiocb *req, unsigned opcode,
char __user *buf, bool compat)
fmode_t mode;
aio_rw_op *rw_op;
rw_iter_op *iter_op;
- struct iovec inline_vec, *iovec = &inline_vec;
+ struct iovec inline_vecs[UIO_FASTIOV], *iovec = inline_vecs;
struct iov_iter iter;
switch (opcode) {
if (!ret)
ret = rw_verify_area(rw, file, &req->ki_pos, req->ki_nbytes);
if (ret < 0) {
- if (iovec != &inline_vec)
+ if (iovec != inline_vecs)
kfree(iovec);
return ret;
}
return -EINVAL;
}
- if (iovec != &inline_vec)
+ if (iovec != inline_vecs)
kfree(iovec);
if (ret != -EIOCBQUEUED) {
}
if (ret > 0)
goto next;
- ret = ulist_add_merge(parents, eb->start,
- (uintptr_t)eie,
- (u64 *)&old, GFP_NOFS);
+ ret = ulist_add_merge_ptr(parents, eb->start,
+ eie, (void **)&old, GFP_NOFS);
if (ret < 0)
break;
if (!ret && extent_item_pos) {
ret = -EIO;
goto out;
}
+ btrfs_tree_read_lock(eb);
+ btrfs_set_lock_blocking_rw(eb, BTRFS_READ_LOCK);
ret = find_extent_in_eb(eb, bytenr,
*extent_item_pos, &eie);
+ btrfs_tree_read_unlock_blocking(eb);
free_extent_buffer(eb);
if (ret < 0)
goto out;
ref->inode_list = eie;
}
- ret = ulist_add_merge(refs, ref->parent,
- (uintptr_t)ref->inode_list,
- (u64 *)&eie, GFP_NOFS);
+ ret = ulist_add_merge_ptr(refs, ref->parent,
+ ref->inode_list,
+ (void **)&eie, GFP_NOFS);
if (ret < 0)
goto out;
if (!ret && extent_item_pos) {
*/
struct list_head delalloc_inodes;
- /*
- * list for tracking inodes that must be sent to disk before a
- * rename or truncate commit
- */
- struct list_head ordered_operations;
-
/* node for the red-black tree that links inodes in subvolume root */
struct rb_node rb_node;
WARN_ON(btrfs_header_generation(buf) > trans->transid);
if (new_root_objectid == BTRFS_TREE_RELOC_OBJECTID)
- ret = btrfs_inc_ref(trans, root, cow, 1, 1);
+ ret = btrfs_inc_ref(trans, root, cow, 1);
else
- ret = btrfs_inc_ref(trans, root, cow, 0, 1);
+ ret = btrfs_inc_ref(trans, root, cow, 0);
if (ret)
return ret;
if ((owner == root->root_key.objectid ||
root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID) &&
!(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF)) {
- ret = btrfs_inc_ref(trans, root, buf, 1, 1);
+ ret = btrfs_inc_ref(trans, root, buf, 1);
BUG_ON(ret); /* -ENOMEM */
if (root->root_key.objectid ==
BTRFS_TREE_RELOC_OBJECTID) {
- ret = btrfs_dec_ref(trans, root, buf, 0, 1);
+ ret = btrfs_dec_ref(trans, root, buf, 0);
BUG_ON(ret); /* -ENOMEM */
- ret = btrfs_inc_ref(trans, root, cow, 1, 1);
+ ret = btrfs_inc_ref(trans, root, cow, 1);
BUG_ON(ret); /* -ENOMEM */
}
new_flags |= BTRFS_BLOCK_FLAG_FULL_BACKREF;
if (root->root_key.objectid ==
BTRFS_TREE_RELOC_OBJECTID)
- ret = btrfs_inc_ref(trans, root, cow, 1, 1);
+ ret = btrfs_inc_ref(trans, root, cow, 1);
else
- ret = btrfs_inc_ref(trans, root, cow, 0, 1);
+ ret = btrfs_inc_ref(trans, root, cow, 0);
BUG_ON(ret); /* -ENOMEM */
}
if (new_flags != 0) {
if (flags & BTRFS_BLOCK_FLAG_FULL_BACKREF) {
if (root->root_key.objectid ==
BTRFS_TREE_RELOC_OBJECTID)
- ret = btrfs_inc_ref(trans, root, cow, 1, 1);
+ ret = btrfs_inc_ref(trans, root, cow, 1);
else
- ret = btrfs_inc_ref(trans, root, cow, 0, 1);
+ ret = btrfs_inc_ref(trans, root, cow, 0);
BUG_ON(ret); /* -ENOMEM */
- ret = btrfs_dec_ref(trans, root, buf, 1, 1);
+ ret = btrfs_dec_ref(trans, root, buf, 1);
BUG_ON(ret); /* -ENOMEM */
}
clean_tree_block(trans, root, buf);
u64 min_alloc_size, u64 empty_size, u64 hint_byte,
struct btrfs_key *ins, int is_data, int delalloc);
int btrfs_inc_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root,
- struct extent_buffer *buf, int full_backref, int no_quota);
+ struct extent_buffer *buf, int full_backref);
int btrfs_dec_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root,
- struct extent_buffer *buf, int full_backref, int no_quota);
+ struct extent_buffer *buf, int full_backref);
int btrfs_set_disk_extent_flags(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 bytenr, u64 num_bytes, u64 flags,
static void free_fs_root(struct btrfs_root *root);
static int btrfs_check_super_valid(struct btrfs_fs_info *fs_info,
int read_only);
-static void btrfs_destroy_ordered_operations(struct btrfs_transaction *t,
- struct btrfs_root *root);
static void btrfs_destroy_ordered_extents(struct btrfs_root *root);
static int btrfs_destroy_delayed_refs(struct btrfs_transaction *trans,
struct btrfs_root *root);
btrfs_cleanup_transaction(root);
}
-static void btrfs_destroy_ordered_operations(struct btrfs_transaction *t,
- struct btrfs_root *root)
-{
- struct btrfs_inode *btrfs_inode;
- struct list_head splice;
-
- INIT_LIST_HEAD(&splice);
-
- mutex_lock(&root->fs_info->ordered_operations_mutex);
- spin_lock(&root->fs_info->ordered_root_lock);
-
- list_splice_init(&t->ordered_operations, &splice);
- while (!list_empty(&splice)) {
- btrfs_inode = list_entry(splice.next, struct btrfs_inode,
- ordered_operations);
-
- list_del_init(&btrfs_inode->ordered_operations);
- spin_unlock(&root->fs_info->ordered_root_lock);
-
- btrfs_invalidate_inodes(btrfs_inode->root);
-
- spin_lock(&root->fs_info->ordered_root_lock);
- }
-
- spin_unlock(&root->fs_info->ordered_root_lock);
- mutex_unlock(&root->fs_info->ordered_operations_mutex);
-}
-
static void btrfs_destroy_ordered_extents(struct btrfs_root *root)
{
struct btrfs_ordered_extent *ordered;
void btrfs_cleanup_one_transaction(struct btrfs_transaction *cur_trans,
struct btrfs_root *root)
{
- btrfs_destroy_ordered_operations(cur_trans, root);
-
btrfs_destroy_delayed_refs(cur_trans, root);
cur_trans->state = TRANS_STATE_COMMIT_START;
static int __btrfs_mod_ref(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct extent_buffer *buf,
- int full_backref, int inc, int no_quota)
+ int full_backref, int inc)
{
u64 bytenr;
u64 num_bytes;
key.offset -= btrfs_file_extent_offset(buf, fi);
ret = process_func(trans, root, bytenr, num_bytes,
parent, ref_root, key.objectid,
- key.offset, no_quota);
+ key.offset, 1);
if (ret)
goto fail;
} else {
num_bytes = btrfs_level_size(root, level - 1);
ret = process_func(trans, root, bytenr, num_bytes,
parent, ref_root, level - 1, 0,
- no_quota);
+ 1);
if (ret)
goto fail;
}
}
int btrfs_inc_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root,
- struct extent_buffer *buf, int full_backref, int no_quota)
+ struct extent_buffer *buf, int full_backref)
{
- return __btrfs_mod_ref(trans, root, buf, full_backref, 1, no_quota);
+ return __btrfs_mod_ref(trans, root, buf, full_backref, 1);
}
int btrfs_dec_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root,
- struct extent_buffer *buf, int full_backref, int no_quota)
+ struct extent_buffer *buf, int full_backref)
{
- return __btrfs_mod_ref(trans, root, buf, full_backref, 0, no_quota);
+ return __btrfs_mod_ref(trans, root, buf, full_backref, 0);
}
static int write_one_cache_group(struct btrfs_trans_handle *trans,
wc->reada_slot = slot;
}
+static int account_leaf_items(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct extent_buffer *eb)
+{
+ int nr = btrfs_header_nritems(eb);
+ int i, extent_type, ret;
+ struct btrfs_key key;
+ struct btrfs_file_extent_item *fi;
+ u64 bytenr, num_bytes;
+
+ for (i = 0; i < nr; i++) {
+ btrfs_item_key_to_cpu(eb, &key, i);
+
+ if (key.type != BTRFS_EXTENT_DATA_KEY)
+ continue;
+
+ fi = btrfs_item_ptr(eb, i, struct btrfs_file_extent_item);
+ /* filter out non qgroup-accountable extents */
+ extent_type = btrfs_file_extent_type(eb, fi);
+
+ if (extent_type == BTRFS_FILE_EXTENT_INLINE)
+ continue;
+
+ bytenr = btrfs_file_extent_disk_bytenr(eb, fi);
+ if (!bytenr)
+ continue;
+
+ num_bytes = btrfs_file_extent_disk_num_bytes(eb, fi);
+
+ ret = btrfs_qgroup_record_ref(trans, root->fs_info,
+ root->objectid,
+ bytenr, num_bytes,
+ BTRFS_QGROUP_OPER_SUB_SUBTREE, 0);
+ if (ret)
+ return ret;
+ }
+ return 0;
+}
+
+/*
+ * Walk up the tree from the bottom, freeing leaves and any interior
+ * nodes which have had all slots visited. If a node (leaf or
+ * interior) is freed, the node above it will have it's slot
+ * incremented. The root node will never be freed.
+ *
+ * At the end of this function, we should have a path which has all
+ * slots incremented to the next position for a search. If we need to
+ * read a new node it will be NULL and the node above it will have the
+ * correct slot selected for a later read.
+ *
+ * If we increment the root nodes slot counter past the number of
+ * elements, 1 is returned to signal completion of the search.
+ */
+static int adjust_slots_upwards(struct btrfs_root *root,
+ struct btrfs_path *path, int root_level)
+{
+ int level = 0;
+ int nr, slot;
+ struct extent_buffer *eb;
+
+ if (root_level == 0)
+ return 1;
+
+ while (level <= root_level) {
+ eb = path->nodes[level];
+ nr = btrfs_header_nritems(eb);
+ path->slots[level]++;
+ slot = path->slots[level];
+ if (slot >= nr || level == 0) {
+ /*
+ * Don't free the root - we will detect this
+ * condition after our loop and return a
+ * positive value for caller to stop walking the tree.
+ */
+ if (level != root_level) {
+ btrfs_tree_unlock_rw(eb, path->locks[level]);
+ path->locks[level] = 0;
+
+ free_extent_buffer(eb);
+ path->nodes[level] = NULL;
+ path->slots[level] = 0;
+ }
+ } else {
+ /*
+ * We have a valid slot to walk back down
+ * from. Stop here so caller can process these
+ * new nodes.
+ */
+ break;
+ }
+
+ level++;
+ }
+
+ eb = path->nodes[root_level];
+ if (path->slots[root_level] >= btrfs_header_nritems(eb))
+ return 1;
+
+ return 0;
+}
+
+/*
+ * root_eb is the subtree root and is locked before this function is called.
+ */
+static int account_shared_subtree(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct extent_buffer *root_eb,
+ u64 root_gen,
+ int root_level)
+{
+ int ret = 0;
+ int level;
+ struct extent_buffer *eb = root_eb;
+ struct btrfs_path *path = NULL;
+
+ BUG_ON(root_level < 0 || root_level > BTRFS_MAX_LEVEL);
+ BUG_ON(root_eb == NULL);
+
+ if (!root->fs_info->quota_enabled)
+ return 0;
+
+ if (!extent_buffer_uptodate(root_eb)) {
+ ret = btrfs_read_buffer(root_eb, root_gen);
+ if (ret)
+ goto out;
+ }
+
+ if (root_level == 0) {
+ ret = account_leaf_items(trans, root, root_eb);
+ goto out;
+ }
+
+ path = btrfs_alloc_path();
+ if (!path)
+ return -ENOMEM;
+
+ /*
+ * Walk down the tree. Missing extent blocks are filled in as
+ * we go. Metadata is accounted every time we read a new
+ * extent block.
+ *
+ * When we reach a leaf, we account for file extent items in it,
+ * walk back up the tree (adjusting slot pointers as we go)
+ * and restart the search process.
+ */
+ extent_buffer_get(root_eb); /* For path */
+ path->nodes[root_level] = root_eb;
+ path->slots[root_level] = 0;
+ path->locks[root_level] = 0; /* so release_path doesn't try to unlock */
+walk_down:
+ level = root_level;
+ while (level >= 0) {
+ if (path->nodes[level] == NULL) {
+ int child_bsize = root->nodesize;
+ int parent_slot;
+ u64 child_gen;
+ u64 child_bytenr;
+
+ /* We need to get child blockptr/gen from
+ * parent before we can read it. */
+ eb = path->nodes[level + 1];
+ parent_slot = path->slots[level + 1];
+ child_bytenr = btrfs_node_blockptr(eb, parent_slot);
+ child_gen = btrfs_node_ptr_generation(eb, parent_slot);
+
+ eb = read_tree_block(root, child_bytenr, child_bsize,
+ child_gen);
+ if (!eb || !extent_buffer_uptodate(eb)) {
+ ret = -EIO;
+ goto out;
+ }
+
+ path->nodes[level] = eb;
+ path->slots[level] = 0;
+
+ btrfs_tree_read_lock(eb);
+ btrfs_set_lock_blocking_rw(eb, BTRFS_READ_LOCK);
+ path->locks[level] = BTRFS_READ_LOCK_BLOCKING;
+
+ ret = btrfs_qgroup_record_ref(trans, root->fs_info,
+ root->objectid,
+ child_bytenr,
+ child_bsize,
+ BTRFS_QGROUP_OPER_SUB_SUBTREE,
+ 0);
+ if (ret)
+ goto out;
+
+ }
+
+ if (level == 0) {
+ ret = account_leaf_items(trans, root, path->nodes[level]);
+ if (ret)
+ goto out;
+
+ /* Nonzero return here means we completed our search */
+ ret = adjust_slots_upwards(root, path, root_level);
+ if (ret)
+ break;
+
+ /* Restart search with new slots */
+ goto walk_down;
+ }
+
+ level--;
+ }
+
+ ret = 0;
+out:
+ btrfs_free_path(path);
+
+ return ret;
+}
+
/*
* helper to process tree block while walking down the tree.
*
/* wc->stage == UPDATE_BACKREF */
if (!(wc->flags[level] & flag)) {
BUG_ON(!path->locks[level]);
- ret = btrfs_inc_ref(trans, root, eb, 1, wc->for_reloc);
+ ret = btrfs_inc_ref(trans, root, eb, 1);
BUG_ON(ret); /* -ENOMEM */
- ret = btrfs_dec_ref(trans, root, eb, 0, wc->for_reloc);
+ ret = btrfs_dec_ref(trans, root, eb, 0);
BUG_ON(ret); /* -ENOMEM */
ret = btrfs_set_disk_extent_flags(trans, root, eb->start,
eb->len, flag,
int level = wc->level;
int reada = 0;
int ret = 0;
+ bool need_account = false;
generation = btrfs_node_ptr_generation(path->nodes[level],
path->slots[level]);
if (wc->stage == DROP_REFERENCE) {
if (wc->refs[level - 1] > 1) {
+ need_account = true;
if (level == 1 &&
(wc->flags[0] & BTRFS_BLOCK_FLAG_FULL_BACKREF))
goto skip;
parent = 0;
}
+ if (need_account) {
+ ret = account_shared_subtree(trans, root, next,
+ generation, level - 1);
+ if (ret) {
+ printk_ratelimited(KERN_ERR "BTRFS: %s Error "
+ "%d accounting shared subtree. Quota "
+ "is out of sync, rescan required.\n",
+ root->fs_info->sb->s_id, ret);
+ }
+ }
ret = btrfs_free_extent(trans, root, bytenr, blocksize, parent,
root->root_key.objectid, level - 1, 0, 0);
BUG_ON(ret); /* -ENOMEM */
if (wc->refs[level] == 1) {
if (level == 0) {
if (wc->flags[level] & BTRFS_BLOCK_FLAG_FULL_BACKREF)
- ret = btrfs_dec_ref(trans, root, eb, 1,
- wc->for_reloc);
+ ret = btrfs_dec_ref(trans, root, eb, 1);
else
- ret = btrfs_dec_ref(trans, root, eb, 0,
- wc->for_reloc);
+ ret = btrfs_dec_ref(trans, root, eb, 0);
BUG_ON(ret); /* -ENOMEM */
+ ret = account_leaf_items(trans, root, eb);
+ if (ret) {
+ printk_ratelimited(KERN_ERR "BTRFS: %s Error "
+ "%d accounting leaf items. Quota "
+ "is out of sync, rescan required.\n",
+ root->fs_info->sb->s_id, ret);
+ }
}
/* make block locked assertion in clean_tree_block happy */
if (!path->locks[level] &&
int level;
bool root_dropped = false;
+ btrfs_debug(root->fs_info, "Drop subvolume %llu", root->objectid);
+
path = btrfs_alloc_path();
if (!path) {
err = -ENOMEM;
goto out_end_trans;
}
+ /*
+ * Qgroup update accounting is run from
+ * delayed ref handling. This usually works
+ * out because delayed refs are normally the
+ * only way qgroup updates are added. However,
+ * we may have added updates during our tree
+ * walk so run qgroups here to make sure we
+ * don't lose any updates.
+ */
+ ret = btrfs_delayed_qgroup_accounting(trans,
+ root->fs_info);
+ if (ret)
+ printk_ratelimited(KERN_ERR "BTRFS: Failure %d "
+ "running qgroup updates "
+ "during snapshot delete. "
+ "Quota is out of sync, "
+ "rescan required.\n", ret);
+
btrfs_end_transaction_throttle(trans, tree_root);
if (!for_reloc && btrfs_need_cleaner_sleep(root)) {
pr_debug("BTRFS: drop snapshot early exit\n");
}
root_dropped = true;
out_end_trans:
+ ret = btrfs_delayed_qgroup_accounting(trans, tree_root->fs_info);
+ if (ret)
+ printk_ratelimited(KERN_ERR "BTRFS: Failure %d "
+ "running qgroup updates "
+ "during snapshot delete. "
+ "Quota is out of sync, "
+ "rescan required.\n", ret);
+
btrfs_end_transaction_throttle(trans, tree_root);
out_free:
kfree(wc);
found_next = 1;
if (ret != 0)
goto insert;
- slot = 0;
+ slot = path->slots[0];
}
btrfs_item_key_to_cpu(path->nodes[0], &found_key, slot);
if (found_key.objectid != BTRFS_EXTENT_CSUM_OBJECTID ||
int btrfs_release_file(struct inode *inode, struct file *filp)
{
- /*
- * ordered_data_close is set by settattr when we are about to truncate
- * a file from a non-zero size to a zero size. This tries to
- * flush down new bytes that may have been written if the
- * application were using truncate to replace a file in place.
- */
- if (test_and_clear_bit(BTRFS_INODE_ORDERED_DATA_CLOSE,
- &BTRFS_I(inode)->runtime_flags)) {
- struct btrfs_trans_handle *trans;
- struct btrfs_root *root = BTRFS_I(inode)->root;
-
- /*
- * We need to block on a committing transaction to keep us from
- * throwing a ordered operation on to the list and causing
- * something like sync to deadlock trying to flush out this
- * inode.
- */
- trans = btrfs_start_transaction(root, 0);
- if (IS_ERR(trans))
- return PTR_ERR(trans);
- btrfs_add_ordered_operation(trans, BTRFS_I(inode)->root, inode);
- btrfs_end_transaction(trans, root);
- if (inode->i_size > BTRFS_ORDERED_OPERATIONS_FLUSH_LIMIT)
- filemap_flush(inode->i_mapping);
- }
if (filp->private_data)
btrfs_ioctl_trans_end(filp);
+ filemap_flush(inode->i_mapping);
return 0;
}
unlock_extent(io_tree, async_extent->start,
async_extent->start +
async_extent->ram_size - 1);
+
+ /*
+ * we need to redirty the pages if we decide to
+ * fallback to uncompressed IO, otherwise we
+ * will not submit these pages down to lower
+ * layers.
+ */
+ extent_range_redirty_for_io(inode,
+ async_extent->start,
+ async_extent->start +
+ async_extent->ram_size - 1);
+
goto retry;
}
goto out_free;
min_size);
BUG_ON(ret);
- /*
- * setattr is responsible for setting the ordered_data_close flag,
- * but that is only tested during the last file release. That
- * could happen well after the next commit, leaving a great big
- * window where new writes may get lost if someone chooses to write
- * to this file after truncating to zero
- *
- * The inode doesn't have any dirty data here, and so if we commit
- * this is a noop. If someone immediately starts writing to the inode
- * it is very likely we'll catch some of their writes in this
- * transaction, and the commit will find this file on the ordered
- * data list with good things to send down.
- *
- * This is a best effort solution, there is still a window where
- * using truncate to replace the contents of the file will
- * end up with a zero length file after a crash.
- */
- if (inode->i_size == 0 && test_bit(BTRFS_INODE_ORDERED_DATA_CLOSE,
- &BTRFS_I(inode)->runtime_flags))
- btrfs_add_ordered_operation(trans, root, inode);
-
/*
* So if we truncate and then write and fsync we normally would just
* write the extents that changed, which is a problem if we need to
mutex_init(&ei->delalloc_mutex);
btrfs_ordered_inode_tree_init(&ei->ordered_tree);
INIT_LIST_HEAD(&ei->delalloc_inodes);
- INIT_LIST_HEAD(&ei->ordered_operations);
RB_CLEAR_NODE(&ei->rb_node);
return inode;
if (!root)
goto free;
- /*
- * Make sure we're properly removed from the ordered operation
- * lists.
- */
- smp_mb();
- if (!list_empty(&BTRFS_I(inode)->ordered_operations)) {
- spin_lock(&root->fs_info->ordered_root_lock);
- list_del_init(&BTRFS_I(inode)->ordered_operations);
- spin_unlock(&root->fs_info->ordered_root_lock);
- }
-
if (test_bit(BTRFS_INODE_HAS_ORPHAN_ITEM,
&BTRFS_I(inode)->runtime_flags)) {
btrfs_info(root->fs_info, "inode %llu still on the orphan list",
ret = 0;
/*
- * we're using rename to replace one file with another.
- * and the replacement file is large. Start IO on it now so
- * we don't add too much work to the end of the transaction
+ * we're using rename to replace one file with another. Start IO on it
+ * now so we don't add too much work to the end of the transaction
*/
- if (new_inode && S_ISREG(old_inode->i_mode) && new_inode->i_size &&
- old_inode->i_size > BTRFS_ORDERED_OPERATIONS_FLUSH_LIMIT)
+ if (new_inode && S_ISREG(old_inode->i_mode) && new_inode->i_size)
filemap_flush(old_inode->i_mapping);
/* close the racy window with snapshot create/destroy ioctl */
*/
btrfs_pin_log_trans(root);
}
- /*
- * make sure the inode gets flushed if it is replacing
- * something.
- */
- if (new_inode && new_inode->i_size && S_ISREG(old_inode->i_mode))
- btrfs_add_ordered_operation(trans, root, old_inode);
inode_inc_iversion(old_dir);
inode_inc_iversion(new_dir);
trace_btrfs_ordered_extent_remove(inode, entry);
- /*
- * we have no more ordered extents for this inode and
- * no dirty pages. We can safely remove it from the
- * list of ordered extents
- */
- if (RB_EMPTY_ROOT(&tree->tree) &&
- !mapping_tagged(inode->i_mapping, PAGECACHE_TAG_DIRTY)) {
- spin_lock(&root->fs_info->ordered_root_lock);
- list_del_init(&BTRFS_I(inode)->ordered_operations);
- spin_unlock(&root->fs_info->ordered_root_lock);
- }
-
if (!root->nr_ordered_extents) {
spin_lock(&root->fs_info->ordered_root_lock);
BUG_ON(list_empty(&root->ordered_root));
mutex_unlock(&fs_info->ordered_operations_mutex);
}
-/*
- * this is used during transaction commit to write all the inodes
- * added to the ordered operation list. These files must be fully on
- * disk before the transaction commits.
- *
- * we have two modes here, one is to just start the IO via filemap_flush
- * and the other is to wait for all the io. When we wait, we have an
- * extra check to make sure the ordered operation list really is empty
- * before we return
- */
-int btrfs_run_ordered_operations(struct btrfs_trans_handle *trans,
- struct btrfs_root *root, int wait)
-{
- struct btrfs_inode *btrfs_inode;
- struct inode *inode;
- struct btrfs_transaction *cur_trans = trans->transaction;
- struct list_head splice;
- struct list_head works;
- struct btrfs_delalloc_work *work, *next;
- int ret = 0;
-
- INIT_LIST_HEAD(&splice);
- INIT_LIST_HEAD(&works);
-
- mutex_lock(&root->fs_info->ordered_extent_flush_mutex);
- spin_lock(&root->fs_info->ordered_root_lock);
- list_splice_init(&cur_trans->ordered_operations, &splice);
- while (!list_empty(&splice)) {
- btrfs_inode = list_entry(splice.next, struct btrfs_inode,
- ordered_operations);
- inode = &btrfs_inode->vfs_inode;
-
- list_del_init(&btrfs_inode->ordered_operations);
-
- /*
- * the inode may be getting freed (in sys_unlink path).
- */
- inode = igrab(inode);
- if (!inode)
- continue;
-
- if (!wait)
- list_add_tail(&BTRFS_I(inode)->ordered_operations,
- &cur_trans->ordered_operations);
- spin_unlock(&root->fs_info->ordered_root_lock);
-
- work = btrfs_alloc_delalloc_work(inode, wait, 1);
- if (!work) {
- spin_lock(&root->fs_info->ordered_root_lock);
- if (list_empty(&BTRFS_I(inode)->ordered_operations))
- list_add_tail(&btrfs_inode->ordered_operations,
- &splice);
- list_splice_tail(&splice,
- &cur_trans->ordered_operations);
- spin_unlock(&root->fs_info->ordered_root_lock);
- ret = -ENOMEM;
- goto out;
- }
- list_add_tail(&work->list, &works);
- btrfs_queue_work(root->fs_info->flush_workers,
- &work->work);
-
- cond_resched();
- spin_lock(&root->fs_info->ordered_root_lock);
- }
- spin_unlock(&root->fs_info->ordered_root_lock);
-out:
- list_for_each_entry_safe(work, next, &works, list) {
- list_del_init(&work->list);
- btrfs_wait_and_free_delalloc_work(work);
- }
- mutex_unlock(&root->fs_info->ordered_extent_flush_mutex);
- return ret;
-}
-
/*
* Used to start IO or wait for a given ordered extent to finish.
*
return index;
}
-
-/*
- * add a given inode to the list of inodes that must be fully on
- * disk before a transaction commit finishes.
- *
- * This basically gives us the ext3 style data=ordered mode, and it is mostly
- * used to make sure renamed files are fully on disk.
- *
- * It is a noop if the inode is already fully on disk.
- *
- * If trans is not null, we'll do a friendly check for a transaction that
- * is already flushing things and force the IO down ourselves.
- */
-void btrfs_add_ordered_operation(struct btrfs_trans_handle *trans,
- struct btrfs_root *root, struct inode *inode)
-{
- struct btrfs_transaction *cur_trans = trans->transaction;
- u64 last_mod;
-
- last_mod = max(BTRFS_I(inode)->generation, BTRFS_I(inode)->last_trans);
-
- /*
- * if this file hasn't been changed since the last transaction
- * commit, we can safely return without doing anything
- */
- if (last_mod <= root->fs_info->last_trans_committed)
- return;
-
- spin_lock(&root->fs_info->ordered_root_lock);
- if (list_empty(&BTRFS_I(inode)->ordered_operations)) {
- list_add_tail(&BTRFS_I(inode)->ordered_operations,
- &cur_trans->ordered_operations);
- }
- spin_unlock(&root->fs_info->ordered_root_lock);
-}
-
int __init ordered_data_init(void)
{
btrfs_ordered_extent_cache = kmem_cache_create("btrfs_ordered_extent",
struct btrfs_ordered_extent *ordered);
int btrfs_find_ordered_sum(struct inode *inode, u64 offset, u64 disk_bytenr,
u32 *sum, int len);
-int btrfs_run_ordered_operations(struct btrfs_trans_handle *trans,
- struct btrfs_root *root, int wait);
-void btrfs_add_ordered_operation(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- struct inode *inode);
int btrfs_wait_ordered_extents(struct btrfs_root *root, int nr);
void btrfs_wait_ordered_roots(struct btrfs_fs_info *fs_info, int nr);
void btrfs_get_logged_extents(struct inode *inode,
mutex_unlock(&fs_info->qgroup_ioctl_lock);
return ret;
}
+
+static int comp_oper_exist(struct btrfs_qgroup_operation *oper1,
+ struct btrfs_qgroup_operation *oper2)
+{
+ /*
+ * Ignore seq and type here, we're looking for any operation
+ * at all related to this extent on that root.
+ */
+ if (oper1->bytenr < oper2->bytenr)
+ return -1;
+ if (oper1->bytenr > oper2->bytenr)
+ return 1;
+ if (oper1->ref_root < oper2->ref_root)
+ return -1;
+ if (oper1->ref_root > oper2->ref_root)
+ return 1;
+ return 0;
+}
+
+static int qgroup_oper_exists(struct btrfs_fs_info *fs_info,
+ struct btrfs_qgroup_operation *oper)
+{
+ struct rb_node *n;
+ struct btrfs_qgroup_operation *cur;
+ int cmp;
+
+ spin_lock(&fs_info->qgroup_op_lock);
+ n = fs_info->qgroup_op_tree.rb_node;
+ while (n) {
+ cur = rb_entry(n, struct btrfs_qgroup_operation, n);
+ cmp = comp_oper_exist(cur, oper);
+ if (cmp < 0) {
+ n = n->rb_right;
+ } else if (cmp) {
+ n = n->rb_left;
+ } else {
+ spin_unlock(&fs_info->qgroup_op_lock);
+ return -EEXIST;
+ }
+ }
+ spin_unlock(&fs_info->qgroup_op_lock);
+ return 0;
+}
+
static int comp_oper(struct btrfs_qgroup_operation *oper1,
struct btrfs_qgroup_operation *oper2)
{
oper->seq = atomic_inc_return(&fs_info->qgroup_op_seq);
INIT_LIST_HEAD(&oper->elem.list);
oper->elem.seq = 0;
+
+ if (type == BTRFS_QGROUP_OPER_SUB_SUBTREE) {
+ /*
+ * If any operation for this bytenr/ref_root combo
+ * exists, then we know it's not exclusively owned and
+ * shouldn't be queued up.
+ *
+ * This also catches the case where we have a cloned
+ * extent that gets queued up multiple times during
+ * drop snapshot.
+ */
+ if (qgroup_oper_exists(fs_info, oper)) {
+ kfree(oper);
+ return 0;
+ }
+ }
+
ret = insert_qgroup_oper(fs_info, oper);
if (ret) {
/* Shouldn't happen so have an assert for developers */
return ret;
}
+/*
+ * Process a reference to a shared subtree. This type of operation is
+ * queued during snapshot removal when we encounter extents which are
+ * shared between more than one root.
+ */
+static int qgroup_subtree_accounting(struct btrfs_trans_handle *trans,
+ struct btrfs_fs_info *fs_info,
+ struct btrfs_qgroup_operation *oper)
+{
+ struct ulist *roots = NULL;
+ struct ulist_node *unode;
+ struct ulist_iterator uiter;
+ struct btrfs_qgroup_list *glist;
+ struct ulist *parents;
+ int ret = 0;
+ int err;
+ struct btrfs_qgroup *qg;
+ u64 root_obj = 0;
+ struct seq_list elem = {};
+
+ parents = ulist_alloc(GFP_NOFS);
+ if (!parents)
+ return -ENOMEM;
+
+ btrfs_get_tree_mod_seq(fs_info, &elem);
+ ret = btrfs_find_all_roots(trans, fs_info, oper->bytenr,
+ elem.seq, &roots);
+ btrfs_put_tree_mod_seq(fs_info, &elem);
+ if (ret < 0)
+ return ret;
+
+ if (roots->nnodes != 1)
+ goto out;
+
+ ULIST_ITER_INIT(&uiter);
+ unode = ulist_next(roots, &uiter); /* Only want 1 so no need to loop */
+ /*
+ * If we find our ref root then that means all refs
+ * this extent has to the root have not yet been
+ * deleted. In that case, we do nothing and let the
+ * last ref for this bytenr drive our update.
+ *
+ * This can happen for example if an extent is
+ * referenced multiple times in a snapshot (clone,
+ * etc). If we are in the middle of snapshot removal,
+ * queued updates for such an extent will find the
+ * root if we have not yet finished removing the
+ * snapshot.
+ */
+ if (unode->val == oper->ref_root)
+ goto out;
+
+ root_obj = unode->val;
+ BUG_ON(!root_obj);
+
+ spin_lock(&fs_info->qgroup_lock);
+ qg = find_qgroup_rb(fs_info, root_obj);
+ if (!qg)
+ goto out_unlock;
+
+ qg->excl += oper->num_bytes;
+ qg->excl_cmpr += oper->num_bytes;
+ qgroup_dirty(fs_info, qg);
+
+ /*
+ * Adjust counts for parent groups. First we find all
+ * parents, then in the 2nd loop we do the adjustment
+ * while adding parents of the parents to our ulist.
+ */
+ list_for_each_entry(glist, &qg->groups, next_group) {
+ err = ulist_add(parents, glist->group->qgroupid,
+ ptr_to_u64(glist->group), GFP_ATOMIC);
+ if (err < 0) {
+ ret = err;
+ goto out_unlock;
+ }
+ }
+
+ ULIST_ITER_INIT(&uiter);
+ while ((unode = ulist_next(parents, &uiter))) {
+ qg = u64_to_ptr(unode->aux);
+ qg->excl += oper->num_bytes;
+ qg->excl_cmpr += oper->num_bytes;
+ qgroup_dirty(fs_info, qg);
+
+ /* Add any parents of the parents */
+ list_for_each_entry(glist, &qg->groups, next_group) {
+ err = ulist_add(parents, glist->group->qgroupid,
+ ptr_to_u64(glist->group), GFP_ATOMIC);
+ if (err < 0) {
+ ret = err;
+ goto out_unlock;
+ }
+ }
+ }
+
+out_unlock:
+ spin_unlock(&fs_info->qgroup_lock);
+
+out:
+ ulist_free(roots);
+ ulist_free(parents);
+ return ret;
+}
+
/*
* btrfs_qgroup_account_ref is called for every ref that is added to or deleted
* from the fs. First, all roots referencing the extent are searched, and
case BTRFS_QGROUP_OPER_SUB_SHARED:
ret = qgroup_shared_accounting(trans, fs_info, oper);
break;
+ case BTRFS_QGROUP_OPER_SUB_SUBTREE:
+ ret = qgroup_subtree_accounting(trans, fs_info, oper);
+ break;
default:
ASSERT(0);
}
BTRFS_QGROUP_OPER_ADD_SHARED,
BTRFS_QGROUP_OPER_SUB_EXCL,
BTRFS_QGROUP_OPER_SUB_SHARED,
+ BTRFS_QGROUP_OPER_SUB_SUBTREE,
};
struct btrfs_qgroup_operation {
return 0;
}
+/*
+ * Calculate numbers for 'df', pessimistic in case of mixed raid profiles.
+ *
+ * If there's a redundant raid level at DATA block groups, use the respective
+ * multiplier to scale the sizes.
+ *
+ * Unused device space usage is based on simulating the chunk allocator
+ * algorithm that respects the device sizes, order of allocations and the
+ * 'alloc_start' value, this is a close approximation of the actual use but
+ * there are other factors that may change the result (like a new metadata
+ * chunk).
+ *
+ * FIXME: not accurate for mixed block groups, total and free/used are ok,
+ * available appears slightly larger.
+ */
static int btrfs_statfs(struct dentry *dentry, struct kstatfs *buf)
{
struct btrfs_fs_info *fs_info = btrfs_sb(dentry->d_sb);
u64 total_free_data = 0;
int bits = dentry->d_sb->s_blocksize_bits;
__be32 *fsid = (__be32 *)fs_info->fsid;
+ unsigned factor = 1;
+ struct btrfs_block_rsv *block_rsv = &fs_info->global_block_rsv;
int ret;
/* holding chunk_muext to avoid allocating new chunks */
rcu_read_lock();
list_for_each_entry_rcu(found, head, list) {
if (found->flags & BTRFS_BLOCK_GROUP_DATA) {
+ int i;
+
total_free_data += found->disk_total - found->disk_used;
total_free_data -=
btrfs_account_ro_block_groups_free_space(found);
+
+ for (i = 0; i < BTRFS_NR_RAID_TYPES; i++) {
+ if (!list_empty(&found->block_groups[i])) {
+ switch (i) {
+ case BTRFS_RAID_DUP:
+ case BTRFS_RAID_RAID1:
+ case BTRFS_RAID_RAID10:
+ factor = 2;
+ }
+ }
+ }
}
total_used += found->disk_used;
}
+
rcu_read_unlock();
- buf->f_namelen = BTRFS_NAME_LEN;
- buf->f_blocks = btrfs_super_total_bytes(disk_super) >> bits;
- buf->f_bfree = buf->f_blocks - (total_used >> bits);
- buf->f_bsize = dentry->d_sb->s_blocksize;
- buf->f_type = BTRFS_SUPER_MAGIC;
+ buf->f_blocks = div_u64(btrfs_super_total_bytes(disk_super), factor);
+ buf->f_blocks >>= bits;
+ buf->f_bfree = buf->f_blocks - (div_u64(total_used, factor) >> bits);
+
+ /* Account global block reserve as used, it's in logical size already */
+ spin_lock(&block_rsv->lock);
+ buf->f_bfree -= block_rsv->size >> bits;
+ spin_unlock(&block_rsv->lock);
+
buf->f_bavail = total_free_data;
ret = btrfs_calc_avail_data_space(fs_info->tree_root, &total_free_data);
if (ret) {
mutex_unlock(&fs_info->chunk_mutex);
return ret;
}
- buf->f_bavail += total_free_data;
+ buf->f_bavail += div_u64(total_free_data, factor);
buf->f_bavail = buf->f_bavail >> bits;
mutex_unlock(&fs_info->chunk_mutex);
+ buf->f_type = BTRFS_SUPER_MAGIC;
+ buf->f_bsize = dentry->d_sb->s_blocksize;
+ buf->f_namelen = BTRFS_NAME_LEN;
+
/* We treat it as constant endianness (it doesn't matter _which_)
because we want the fsid to come out the same whether mounted
on a big-endian or little-endian host */
spin_lock_init(&cur_trans->delayed_refs.lock);
INIT_LIST_HEAD(&cur_trans->pending_snapshots);
- INIT_LIST_HEAD(&cur_trans->ordered_operations);
INIT_LIST_HEAD(&cur_trans->pending_chunks);
INIT_LIST_HEAD(&cur_trans->switch_commits);
list_add_tail(&cur_trans->list, &fs_info->trans_list);
kmem_cache_free(btrfs_trans_handle_cachep, trans);
}
-static int btrfs_flush_all_pending_stuffs(struct btrfs_trans_handle *trans,
- struct btrfs_root *root)
-{
- int ret;
-
- ret = btrfs_run_delayed_items(trans, root);
- if (ret)
- return ret;
-
- /*
- * rename don't use btrfs_join_transaction, so, once we
- * set the transaction to blocked above, we aren't going
- * to get any new ordered operations. We can safely run
- * it here and no for sure that nothing new will be added
- * to the list
- */
- ret = btrfs_run_ordered_operations(trans, root, 1);
-
- return ret;
-}
-
static inline int btrfs_start_delalloc_flush(struct btrfs_fs_info *fs_info)
{
if (btrfs_test_opt(fs_info->tree_root, FLUSHONCOMMIT))
struct btrfs_transaction *prev_trans = NULL;
int ret;
- ret = btrfs_run_ordered_operations(trans, root, 0);
- if (ret) {
- btrfs_abort_transaction(trans, root, ret);
- btrfs_end_transaction(trans, root);
- return ret;
- }
-
/* Stop the commit early if ->aborted is set */
if (unlikely(ACCESS_ONCE(cur_trans->aborted))) {
ret = cur_trans->aborted;
if (ret)
goto cleanup_transaction;
- ret = btrfs_flush_all_pending_stuffs(trans, root);
+ ret = btrfs_run_delayed_items(trans, root);
if (ret)
goto cleanup_transaction;
extwriter_counter_read(cur_trans) == 0);
/* some pending stuffs might be added after the previous flush. */
- ret = btrfs_flush_all_pending_stuffs(trans, root);
+ ret = btrfs_run_delayed_items(trans, root);
if (ret)
goto cleanup_transaction;
wait_queue_head_t writer_wait;
wait_queue_head_t commit_wait;
struct list_head pending_snapshots;
- struct list_head ordered_operations;
struct list_head pending_chunks;
struct list_head switch_commits;
struct btrfs_delayed_ref_root delayed_refs;
int ulist_add(struct ulist *ulist, u64 val, u64 aux, gfp_t gfp_mask);
int ulist_add_merge(struct ulist *ulist, u64 val, u64 aux,
u64 *old_aux, gfp_t gfp_mask);
+
+/* just like ulist_add_merge() but take a pointer for the aux data */
+static inline int ulist_add_merge_ptr(struct ulist *ulist, u64 val, void *aux,
+ void **old_aux, gfp_t gfp_mask)
+{
+#if BITS_PER_LONG == 32
+ u64 old64 = (uintptr_t)*old_aux;
+ int ret = ulist_add_merge(ulist, val, (uintptr_t)aux, &old64, gfp_mask);
+ *old_aux = (void *)((uintptr_t)old64);
+ return ret;
+#else
+ return ulist_add_merge(ulist, val, (u64)aux, (u64 *)old_aux, gfp_mask);
+#endif
+}
+
struct ulist_node *ulist_next(struct ulist *ulist,
struct ulist_iterator *uiter);
return 0;
}
+static long cifs_fallocate(struct file *file, int mode, loff_t off, loff_t len)
+{
+ struct super_block *sb = file->f_path.dentry->d_sb;
+ struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
+ struct cifs_tcon *tcon = cifs_sb_master_tcon(cifs_sb);
+ struct TCP_Server_Info *server = tcon->ses->server;
+
+ if (server->ops->fallocate)
+ return server->ops->fallocate(file, tcon, mode, off, len);
+
+ return -EOPNOTSUPP;
+}
+
static int cifs_permission(struct inode *inode, int mask)
{
struct cifs_sb_info *cifs_sb;
if (!(S_ISREG(inode->i_mode)))
return -EINVAL;
- /* check if file is oplocked */
- if (((arg == F_RDLCK) && CIFS_CACHE_READ(CIFS_I(inode))) ||
+ /* Check if file is oplocked if this is request for new lease */
+ if (arg == F_UNLCK ||
+ ((arg == F_RDLCK) && CIFS_CACHE_READ(CIFS_I(inode))) ||
((arg == F_WRLCK) && CIFS_CACHE_WRITE(CIFS_I(inode))))
return generic_setlease(file, arg, lease);
else if (tlink_tcon(cfile->tlink)->local_lease &&
.unlocked_ioctl = cifs_ioctl,
#endif /* CONFIG_CIFS_POSIX */
.setlease = cifs_setlease,
+ .fallocate = cifs_fallocate,
};
const struct file_operations cifs_file_strict_ops = {
.unlocked_ioctl = cifs_ioctl,
#endif /* CONFIG_CIFS_POSIX */
.setlease = cifs_setlease,
+ .fallocate = cifs_fallocate,
};
const struct file_operations cifs_file_direct_ops = {
#endif /* CONFIG_CIFS_POSIX */
.llseek = cifs_llseek,
.setlease = cifs_setlease,
+ .fallocate = cifs_fallocate,
};
const struct file_operations cifs_file_nobrl_ops = {
.unlocked_ioctl = cifs_ioctl,
#endif /* CONFIG_CIFS_POSIX */
.setlease = cifs_setlease,
+ .fallocate = cifs_fallocate,
};
const struct file_operations cifs_file_strict_nobrl_ops = {
.unlocked_ioctl = cifs_ioctl,
#endif /* CONFIG_CIFS_POSIX */
.setlease = cifs_setlease,
+ .fallocate = cifs_fallocate,
};
const struct file_operations cifs_file_direct_nobrl_ops = {
#endif /* CONFIG_CIFS_POSIX */
.llseek = cifs_llseek,
.setlease = cifs_setlease,
+ .fallocate = cifs_fallocate,
};
const struct file_operations cifs_dir_ops = {
/* get mtu credits */
int (*wait_mtu_credits)(struct TCP_Server_Info *, unsigned int,
unsigned int *, unsigned int *);
+ /* check if we need to issue closedir */
+ bool (*dir_needs_close)(struct cifsFileInfo *);
+ long (*fallocate)(struct file *, struct cifs_tcon *, int, loff_t,
+ loff_t);
};
struct smb_version_values {
for this mount even if server would support */
bool local_lease:1; /* check leases (only) on local system not remote */
bool broken_posix_open; /* e.g. Samba server versions < 3.3.2, 3.2.9 */
+ bool broken_sparse_sup; /* if server or share does not support sparse */
bool need_reconnect:1; /* connection reset, tid now invalid */
#ifdef CONFIG_CIFS_SMB2
bool print:1; /* set if connection to printer share */
/* minimum includes first three fields, and empty FS Name */
#define MIN_FS_ATTR_INFO_SIZE 12
+
+/* List of FileSystemAttributes - see 2.5.1 of MS-FSCC */
+#define FILE_SUPPORT_INTEGRITY_STREAMS 0x04000000
+#define FILE_SUPPORTS_USN_JOURNAL 0x02000000
+#define FILE_SUPPORTS_OPEN_BY_FILE_ID 0x01000000
+#define FILE_SUPPORTS_EXTENDED_ATTRIBUTES 0x00800000
+#define FILE_SUPPORTS_HARD_LINKS 0x00400000
+#define FILE_SUPPORTS_TRANSACTIONS 0x00200000
+#define FILE_SEQUENTIAL_WRITE_ONCE 0x00100000
+#define FILE_READ_ONLY_VOLUME 0x00080000
+#define FILE_NAMED_STREAMS 0x00040000
+#define FILE_SUPPORTS_ENCRYPTION 0x00020000
+#define FILE_SUPPORTS_OBJECT_IDS 0x00010000
+#define FILE_VOLUME_IS_COMPRESSED 0x00008000
+#define FILE_SUPPORTS_REMOTE_STORAGE 0x00000100
+#define FILE_SUPPORTS_REPARSE_POINTS 0x00000080
+#define FILE_SUPPORTS_SPARSE_FILES 0x00000040
+#define FILE_VOLUME_QUOTAS 0x00000020
+#define FILE_FILE_COMPRESSION 0x00000010
+#define FILE_PERSISTENT_ACLS 0x00000008
+#define FILE_UNICODE_ON_DISK 0x00000004
+#define FILE_CASE_PRESERVED_NAMES 0x00000002
+#define FILE_CASE_SENSITIVE_SEARCH 0x00000001
typedef struct {
__le32 Attributes;
__le32 MaxPathNameComponentLength;
cifs_dbg(FYI, "Freeing private data in close dir\n");
spin_lock(&cifs_file_list_lock);
- if (!cfile->srch_inf.endOfSearch && !cfile->invalidHandle) {
+ if (server->ops->dir_needs_close(cfile)) {
cfile->invalidHandle = true;
spin_unlock(&cifs_file_list_lock);
if (server->ops->close_dir)
target_dentry, to_name);
}
+ /* force revalidate to go get info when needed */
+ CIFS_I(source_dir)->time = CIFS_I(target_dir)->time = 0;
+
+ source_dir->i_ctime = source_dir->i_mtime = target_dir->i_ctime =
+ target_dir->i_mtime = current_fs_time(source_dir->i_sb);
+
cifs_rename_exit:
kfree(info_buf_source);
kfree(from_name);
cinode->oplock = 0;
}
-static int
-cifs_oplock_break_wait(void *unused)
-{
- schedule();
- return signal_pending(current) ? -ERESTARTSYS : 0;
-}
-
/*
* We wait for oplock breaks to be processed before we attempt to perform
* writes.
/* close and restart search */
cifs_dbg(FYI, "search backing up - close and restart search\n");
spin_lock(&cifs_file_list_lock);
- if (!cfile->srch_inf.endOfSearch && !cfile->invalidHandle) {
+ if (server->ops->dir_needs_close(cfile)) {
cfile->invalidHandle = true;
spin_unlock(&cifs_file_list_lock);
if (server->ops->close)
return CIFS_SB(inode->i_sb)->wsize;
}
+static bool
+cifs_dir_needs_close(struct cifsFileInfo *cfile)
+{
+ return !cfile->srch_inf.endOfSearch && !cfile->invalidHandle;
+}
+
struct smb_version_operations smb1_operations = {
.send_cancel = send_nt_cancel,
.compare_fids = cifs_compare_fids,
.create_mf_symlink = cifs_create_mf_symlink,
.is_read_op = cifs_is_read_op,
.wp_retry_size = cifs_wp_retry_size,
+ .dir_needs_close = cifs_dir_needs_close,
#ifdef CONFIG_CIFS_XATTR
.query_all_EAs = CIFSSMBQAllEAs,
.set_EA = CIFSSMBSetEA,
{STATUS_BREAKPOINT, -EIO, "STATUS_BREAKPOINT"},
{STATUS_SINGLE_STEP, -EIO, "STATUS_SINGLE_STEP"},
{STATUS_BUFFER_OVERFLOW, -EIO, "STATUS_BUFFER_OVERFLOW"},
- {STATUS_NO_MORE_FILES, -EIO, "STATUS_NO_MORE_FILES"},
+ {STATUS_NO_MORE_FILES, -ENODATA, "STATUS_NO_MORE_FILES"},
{STATUS_WAKE_SYSTEM_DEBUGGER, -EIO, "STATUS_WAKE_SYSTEM_DEBUGGER"},
{STATUS_HANDLES_CLOSED, -EIO, "STATUS_HANDLES_CLOSED"},
{STATUS_NO_INHERITANCE, -EIO, "STATUS_NO_INHERITANCE"},
{STATUS_INVALID_PARAMETER, -EINVAL, "STATUS_INVALID_PARAMETER"},
{STATUS_NO_SUCH_DEVICE, -ENODEV, "STATUS_NO_SUCH_DEVICE"},
{STATUS_NO_SUCH_FILE, -ENOENT, "STATUS_NO_SUCH_FILE"},
- {STATUS_INVALID_DEVICE_REQUEST, -EIO, "STATUS_INVALID_DEVICE_REQUEST"},
+ {STATUS_INVALID_DEVICE_REQUEST, -EOPNOTSUPP, "STATUS_INVALID_DEVICE_REQUEST"},
{STATUS_END_OF_FILE, -ENODATA, "STATUS_END_OF_FILE"},
{STATUS_WRONG_VOLUME, -EIO, "STATUS_WRONG_VOLUME"},
{STATUS_NO_MEDIA_IN_DEVICE, -EIO, "STATUS_NO_MEDIA_IN_DEVICE"},
/* Windows 7 server returns 24 bytes more */
if (clc_len + 20 == len && command == SMB2_OPLOCK_BREAK_HE)
return 0;
- /* server can return one byte more */
+ /* server can return one byte more due to implied bcc[0] */
if (clc_len == 4 + len + 1)
return 0;
+
+ /*
+ * MacOS server pads after SMB2.1 write response with 3 bytes
+ * of junk. Other servers match RFC1001 len to actual
+ * SMB2/SMB3 frame length (header + smb2 response specific data)
+ * Log the server error (once), but allow it and continue
+ * since the frame is parseable.
+ */
+ if (clc_len < 4 /* RFC1001 header size */ + len) {
+ printk_once(KERN_WARNING
+ "SMB2 server sent bad RFC1001 len %d not %d\n",
+ len, clc_len - 4);
+ return 0;
+ }
+
return 1;
}
return 0;
return SMB2_write(xid, parms, written, iov, nr_segs);
}
+/* Set or clear the SPARSE_FILE attribute based on value passed in setsparse */
+static bool smb2_set_sparse(const unsigned int xid, struct cifs_tcon *tcon,
+ struct cifsFileInfo *cfile, struct inode *inode, __u8 setsparse)
+{
+ struct cifsInodeInfo *cifsi;
+ int rc;
+
+ cifsi = CIFS_I(inode);
+
+ /* if file already sparse don't bother setting sparse again */
+ if ((cifsi->cifsAttrs & FILE_ATTRIBUTE_SPARSE_FILE) && setsparse)
+ return true; /* already sparse */
+
+ if (!(cifsi->cifsAttrs & FILE_ATTRIBUTE_SPARSE_FILE) && !setsparse)
+ return true; /* already not sparse */
+
+ /*
+ * Can't check for sparse support on share the usual way via the
+ * FS attribute info (FILE_SUPPORTS_SPARSE_FILES) on the share
+ * since Samba server doesn't set the flag on the share, yet
+ * supports the set sparse FSCTL and returns sparse correctly
+ * in the file attributes. If we fail setting sparse though we
+ * mark that server does not support sparse files for this share
+ * to avoid repeatedly sending the unsupported fsctl to server
+ * if the file is repeatedly extended.
+ */
+ if (tcon->broken_sparse_sup)
+ return false;
+
+ rc = SMB2_ioctl(xid, tcon, cfile->fid.persistent_fid,
+ cfile->fid.volatile_fid, FSCTL_SET_SPARSE,
+ true /* is_fctl */, &setsparse, 1, NULL, NULL);
+ if (rc) {
+ tcon->broken_sparse_sup = true;
+ cifs_dbg(FYI, "set sparse rc = %d\n", rc);
+ return false;
+ }
+
+ if (setsparse)
+ cifsi->cifsAttrs |= FILE_ATTRIBUTE_SPARSE_FILE;
+ else
+ cifsi->cifsAttrs &= (~FILE_ATTRIBUTE_SPARSE_FILE);
+
+ return true;
+}
+
static int
smb2_set_file_size(const unsigned int xid, struct cifs_tcon *tcon,
struct cifsFileInfo *cfile, __u64 size, bool set_alloc)
{
__le64 eof = cpu_to_le64(size);
+ struct inode *inode;
+
+ /*
+ * If extending file more than one page make sparse. Many Linux fs
+ * make files sparse by default when extending via ftruncate
+ */
+ inode = cfile->dentry->d_inode;
+
+ if (!set_alloc && (size > inode->i_size + 8192)) {
+ __u8 set_sparse = 1;
+
+ /* whether set sparse succeeds or not, extend the file */
+ smb2_set_sparse(xid, tcon, cfile, inode, set_sparse);
+ }
+
return SMB2_set_eof(xid, tcon, cfile->fid.persistent_fid,
cfile->fid.volatile_fid, cfile->pid, &eof, false);
}
return rc;
}
+static long smb3_zero_range(struct file *file, struct cifs_tcon *tcon,
+ loff_t offset, loff_t len, bool keep_size)
+{
+ struct inode *inode;
+ struct cifsInodeInfo *cifsi;
+ struct cifsFileInfo *cfile = file->private_data;
+ struct file_zero_data_information fsctl_buf;
+ long rc;
+ unsigned int xid;
+
+ xid = get_xid();
+
+ inode = cfile->dentry->d_inode;
+ cifsi = CIFS_I(inode);
+
+ /* if file not oplocked can't be sure whether asking to extend size */
+ if (!CIFS_CACHE_READ(cifsi))
+ if (keep_size == false)
+ return -EOPNOTSUPP;
+
+ /*
+ * Must check if file sparse since fallocate -z (zero range) assumes
+ * non-sparse allocation
+ */
+ if (!(cifsi->cifsAttrs & FILE_ATTRIBUTE_SPARSE_FILE))
+ return -EOPNOTSUPP;
+
+ /*
+ * need to make sure we are not asked to extend the file since the SMB3
+ * fsctl does not change the file size. In the future we could change
+ * this to zero the first part of the range then set the file size
+ * which for a non sparse file would zero the newly extended range
+ */
+ if (keep_size == false)
+ if (i_size_read(inode) < offset + len)
+ return -EOPNOTSUPP;
+
+ cifs_dbg(FYI, "offset %lld len %lld", offset, len);
+
+ fsctl_buf.FileOffset = cpu_to_le64(offset);
+ fsctl_buf.BeyondFinalZero = cpu_to_le64(offset + len);
+
+ rc = SMB2_ioctl(xid, tcon, cfile->fid.persistent_fid,
+ cfile->fid.volatile_fid, FSCTL_SET_ZERO_DATA,
+ true /* is_fctl */, (char *)&fsctl_buf,
+ sizeof(struct file_zero_data_information), NULL, NULL);
+ free_xid(xid);
+ return rc;
+}
+
+static long smb3_punch_hole(struct file *file, struct cifs_tcon *tcon,
+ loff_t offset, loff_t len)
+{
+ struct inode *inode;
+ struct cifsInodeInfo *cifsi;
+ struct cifsFileInfo *cfile = file->private_data;
+ struct file_zero_data_information fsctl_buf;
+ long rc;
+ unsigned int xid;
+ __u8 set_sparse = 1;
+
+ xid = get_xid();
+
+ inode = cfile->dentry->d_inode;
+ cifsi = CIFS_I(inode);
+
+ /* Need to make file sparse, if not already, before freeing range. */
+ /* Consider adding equivalent for compressed since it could also work */
+ if (!smb2_set_sparse(xid, tcon, cfile, inode, set_sparse))
+ return -EOPNOTSUPP;
+
+ cifs_dbg(FYI, "offset %lld len %lld", offset, len);
+
+ fsctl_buf.FileOffset = cpu_to_le64(offset);
+ fsctl_buf.BeyondFinalZero = cpu_to_le64(offset + len);
+
+ rc = SMB2_ioctl(xid, tcon, cfile->fid.persistent_fid,
+ cfile->fid.volatile_fid, FSCTL_SET_ZERO_DATA,
+ true /* is_fctl */, (char *)&fsctl_buf,
+ sizeof(struct file_zero_data_information), NULL, NULL);
+ free_xid(xid);
+ return rc;
+}
+
+static long smb3_fallocate(struct file *file, struct cifs_tcon *tcon, int mode,
+ loff_t off, loff_t len)
+{
+ /* KEEP_SIZE already checked for by do_fallocate */
+ if (mode & FALLOC_FL_PUNCH_HOLE)
+ return smb3_punch_hole(file, tcon, off, len);
+ else if (mode & FALLOC_FL_ZERO_RANGE) {
+ if (mode & FALLOC_FL_KEEP_SIZE)
+ return smb3_zero_range(file, tcon, off, len, true);
+ return smb3_zero_range(file, tcon, off, len, false);
+ }
+
+ return -EOPNOTSUPP;
+}
+
static void
smb2_downgrade_oplock(struct TCP_Server_Info *server,
struct cifsInodeInfo *cinode, bool set_level2)
SMB2_MAX_BUFFER_SIZE);
}
+static bool
+smb2_dir_needs_close(struct cifsFileInfo *cfile)
+{
+ return !cfile->invalidHandle;
+}
+
struct smb_version_operations smb20_operations = {
.compare_fids = smb2_compare_fids,
.setup_request = smb2_setup_request,
.parse_lease_buf = smb2_parse_lease_buf,
.clone_range = smb2_clone_range,
.wp_retry_size = smb2_wp_retry_size,
+ .dir_needs_close = smb2_dir_needs_close,
};
struct smb_version_operations smb21_operations = {
.parse_lease_buf = smb2_parse_lease_buf,
.clone_range = smb2_clone_range,
.wp_retry_size = smb2_wp_retry_size,
+ .dir_needs_close = smb2_dir_needs_close,
};
struct smb_version_operations smb30_operations = {
.clone_range = smb2_clone_range,
.validate_negotiate = smb3_validate_negotiate,
.wp_retry_size = smb2_wp_retry_size,
+ .dir_needs_close = smb2_dir_needs_close,
+ .fallocate = smb3_fallocate,
};
struct smb_version_values smb20_values = {
tcon_error_exit:
if (rsp->hdr.Status == STATUS_BAD_NETWORK_NAME) {
cifs_dbg(VFS, "BAD_NETWORK_NAME: %s\n", tree);
- tcon->bad_network_name = true;
+ if (tcon)
+ tcon->bad_network_name = true;
}
goto tcon_exit;
}
cifs_dbg(FYI, "SMB2 IOCTL\n");
- *out_data = NULL;
+ if (out_data != NULL)
+ *out_data = NULL;
+
/* zero out returned data len, in case of error */
if (plen)
*plen = 0;
rsp = (struct smb2_query_directory_rsp *)iov[0].iov_base;
if (rc) {
+ if (rc == -ENODATA && rsp->hdr.Status == STATUS_NO_MORE_FILES) {
+ srch_inf->endOfSearch = true;
+ rc = 0;
+ }
cifs_stats_fail_inc(tcon, SMB2_QUERY_DIRECTORY_HE);
goto qdir_exit;
}
else
cifs_dbg(VFS, "illegal search buffer type\n");
- if (rsp->hdr.Status == STATUS_NO_MORE_FILES)
- srch_inf->endOfSearch = 1;
- else
- srch_inf->endOfSearch = 0;
-
return rc;
qdir_exit:
__u32 Reserved2;
} __packed;
+/* this goes in the ioctl buffer when doing FSCTL_SET_ZERO_DATA */
+struct file_zero_data_information {
+ __le64 FileOffset;
+ __le64 BeyondFinalZero;
+} __packed;
+
struct copychunk_ioctl_rsp {
__le32 ChunksWritten;
__le32 ChunkBytesWritten;
#define FSCTL_SET_OBJECT_ID_EXTENDED 0x000900BC /* BB add struct */
#define FSCTL_CREATE_OR_GET_OBJECT_ID 0x000900C0 /* BB add struct */
#define FSCTL_SET_SPARSE 0x000900C4 /* BB add struct */
-#define FSCTL_SET_ZERO_DATA 0x000900C8 /* BB add struct */
+#define FSCTL_SET_ZERO_DATA 0x000980C8
#define FSCTL_SET_ENCRYPTION 0x000900D7 /* BB add struct */
#define FSCTL_ENCRYPTION_FSCTL_IO 0x000900DB /* BB add struct */
#define FSCTL_WRITE_RAW_ENCRYPTED 0x000900DF /* BB add struct */
*/
overhead += ngroups * (2 + sbi->s_itb_per_group);
- /* Add the journal blocks as well */
- overhead += sbi->s_journal->j_maxlen;
+ /* Add the internal journal blocks as well */
+ if (sbi->s_journal && !sbi->journal_bdev)
+ overhead += sbi->s_journal->j_maxlen;
sbi->s_overhead_last = overhead;
smp_wmb();
return;
}
-static int isofs_read_inode(struct inode *);
+static int isofs_read_inode(struct inode *, int relocated);
static int isofs_statfs (struct dentry *, struct kstatfs *);
static struct kmem_cache *isofs_inode_cachep;
goto out;
}
-static int isofs_read_inode(struct inode *inode)
+static int isofs_read_inode(struct inode *inode, int relocated)
{
struct super_block *sb = inode->i_sb;
struct isofs_sb_info *sbi = ISOFS_SB(sb);
*/
if (!high_sierra) {
- parse_rock_ridge_inode(de, inode);
+ parse_rock_ridge_inode(de, inode, relocated);
/* if we want uid/gid set, override the rock ridge setting */
if (sbi->s_uid_set)
inode->i_uid = sbi->s_uid;
* offset that point to the underlying meta-data for the inode. The
* code below is otherwise similar to the iget() code in
* include/linux/fs.h */
-struct inode *isofs_iget(struct super_block *sb,
- unsigned long block,
- unsigned long offset)
+struct inode *__isofs_iget(struct super_block *sb,
+ unsigned long block,
+ unsigned long offset,
+ int relocated)
{
unsigned long hashval;
struct inode *inode;
return ERR_PTR(-ENOMEM);
if (inode->i_state & I_NEW) {
- ret = isofs_read_inode(inode);
+ ret = isofs_read_inode(inode, relocated);
if (ret < 0) {
iget_failed(inode);
inode = ERR_PTR(ret);
struct inode; /* To make gcc happy */
-extern int parse_rock_ridge_inode(struct iso_directory_record *, struct inode *);
+extern int parse_rock_ridge_inode(struct iso_directory_record *, struct inode *, int relocated);
extern int get_rock_ridge_filename(struct iso_directory_record *, char *, struct inode *);
extern int isofs_name_translate(struct iso_directory_record *, char *, struct inode *);
extern struct buffer_head *isofs_bread(struct inode *, sector_t);
extern int isofs_get_blocks(struct inode *, sector_t, struct buffer_head **, unsigned long);
-extern struct inode *isofs_iget(struct super_block *sb,
- unsigned long block,
- unsigned long offset);
+struct inode *__isofs_iget(struct super_block *sb,
+ unsigned long block,
+ unsigned long offset,
+ int relocated);
+
+static inline struct inode *isofs_iget(struct super_block *sb,
+ unsigned long block,
+ unsigned long offset)
+{
+ return __isofs_iget(sb, block, offset, 0);
+}
+
+static inline struct inode *isofs_iget_reloc(struct super_block *sb,
+ unsigned long block,
+ unsigned long offset)
+{
+ return __isofs_iget(sb, block, offset, 1);
+}
/* Because the inode number is no longer relevant to finding the
* underlying meta-data for an inode, we are free to choose a more
goto out;
}
+#define RR_REGARD_XA 1
+#define RR_RELOC_DE 2
+
static int
parse_rock_ridge_inode_internal(struct iso_directory_record *de,
- struct inode *inode, int regard_xa)
+ struct inode *inode, int flags)
{
int symlink_len = 0;
int cnt, sig;
+ unsigned int reloc_block;
struct inode *reloc;
struct rock_ridge *rr;
int rootflag;
init_rock_state(&rs, inode);
setup_rock_ridge(de, inode, &rs);
- if (regard_xa) {
+ if (flags & RR_REGARD_XA) {
rs.chr += 14;
rs.len -= 14;
if (rs.len < 0)
"relocated directory\n");
goto out;
case SIG('C', 'L'):
- ISOFS_I(inode)->i_first_extent =
- isonum_733(rr->u.CL.location);
- reloc =
- isofs_iget(inode->i_sb,
- ISOFS_I(inode)->i_first_extent,
- 0);
+ if (flags & RR_RELOC_DE) {
+ printk(KERN_ERR
+ "ISOFS: Recursive directory relocation "
+ "is not supported\n");
+ goto eio;
+ }
+ reloc_block = isonum_733(rr->u.CL.location);
+ if (reloc_block == ISOFS_I(inode)->i_iget5_block &&
+ ISOFS_I(inode)->i_iget5_offset == 0) {
+ printk(KERN_ERR
+ "ISOFS: Directory relocation points to "
+ "itself\n");
+ goto eio;
+ }
+ ISOFS_I(inode)->i_first_extent = reloc_block;
+ reloc = isofs_iget_reloc(inode->i_sb, reloc_block, 0);
if (IS_ERR(reloc)) {
ret = PTR_ERR(reloc);
goto out;
return rpnt;
}
-int parse_rock_ridge_inode(struct iso_directory_record *de, struct inode *inode)
+int parse_rock_ridge_inode(struct iso_directory_record *de, struct inode *inode,
+ int relocated)
{
- int result = parse_rock_ridge_inode_internal(de, inode, 0);
+ int flags = relocated ? RR_RELOC_DE : 0;
+ int result = parse_rock_ridge_inode_internal(de, inode, flags);
/*
* if rockridge flag was reset and we didn't look for attributes
*/
if ((ISOFS_SB(inode->i_sb)->s_rock_offset == -1)
&& (ISOFS_SB(inode->i_sb)->s_rock == 2)) {
- result = parse_rock_ridge_inode_internal(de, inode, 14);
+ result = parse_rock_ridge_inode_internal(de, inode,
+ flags | RR_REGARD_XA);
}
return result;
}
}
EXPORT_SYMBOL(locks_free_lock);
+static void
+locks_dispose_list(struct list_head *dispose)
+{
+ struct file_lock *fl;
+
+ while (!list_empty(dispose)) {
+ fl = list_first_entry(dispose, struct file_lock, fl_block);
+ list_del_init(&fl->fl_block);
+ locks_free_lock(fl);
+ }
+}
+
void locks_init_lock(struct file_lock *fl)
{
memset(fl, 0, sizeof(struct file_lock));
void locks_copy_lock(struct file_lock *new, struct file_lock *fl)
{
- locks_release_private(new);
+ /* "new" must be a freshly-initialized lock */
+ WARN_ON_ONCE(new->fl_ops);
__locks_copy_lock(new, fl);
new->fl_file = fl->fl_file;
*
* Must be called with i_lock held!
*/
-static void locks_delete_lock(struct file_lock **thisfl_p)
+static void locks_delete_lock(struct file_lock **thisfl_p,
+ struct list_head *dispose)
{
struct file_lock *fl = *thisfl_p;
locks_unlink_lock(thisfl_p);
- locks_free_lock(fl);
+ if (dispose)
+ list_add(&fl->fl_block, dispose);
+ else
+ locks_free_lock(fl);
}
/* Determine if lock sys_fl blocks lock caller_fl. Common functionality
struct inode * inode = file_inode(filp);
int error = 0;
int found = 0;
+ LIST_HEAD(dispose);
if (!(request->fl_flags & FL_ACCESS) && (request->fl_type != F_UNLCK)) {
new_fl = locks_alloc_lock();
if (request->fl_type == fl->fl_type)
goto out;
found = 1;
- locks_delete_lock(before);
+ locks_delete_lock(before, &dispose);
break;
}
spin_unlock(&inode->i_lock);
if (new_fl)
locks_free_lock(new_fl);
+ locks_dispose_list(&dispose);
return error;
}
struct file_lock **before;
int error;
bool added = false;
+ LIST_HEAD(dispose);
/*
* We may need two file_lock structures for this operation,
else
request->fl_end = fl->fl_end;
if (added) {
- locks_delete_lock(before);
+ locks_delete_lock(before, &dispose);
continue;
}
request = fl;
* one (This may happen several times).
*/
if (added) {
- locks_delete_lock(before);
+ locks_delete_lock(before, &dispose);
continue;
}
- /* Replace the old lock with the new one.
- * Wake up anybody waiting for the old one,
- * as the change in lock type might satisfy
- * their needs.
+ /*
+ * Replace the old lock with new_fl, and
+ * remove the old one. It's safe to do the
+ * insert here since we know that we won't be
+ * using new_fl later, and that the lock is
+ * just replacing an existing lock.
*/
- locks_wake_up_blocks(fl);
- fl->fl_start = request->fl_start;
- fl->fl_end = request->fl_end;
- fl->fl_type = request->fl_type;
- locks_release_private(fl);
- locks_copy_private(fl, request);
- request = fl;
+ error = -ENOLCK;
+ if (!new_fl)
+ goto out;
+ locks_copy_lock(new_fl, request);
+ request = new_fl;
+ new_fl = NULL;
+ locks_delete_lock(before, &dispose);
+ locks_insert_lock(before, request);
added = true;
}
}
locks_free_lock(new_fl);
if (new_fl2)
locks_free_lock(new_fl2);
+ locks_dispose_list(&dispose);
return error;
}
printk(KERN_ERR "locks_delete_lock: fasync == %p\n", fl->fl_fasync);
fl->fl_fasync = NULL;
}
- locks_delete_lock(before);
+ locks_delete_lock(before, NULL);
}
return 0;
}
ret = fl;
spin_lock(&inode->i_lock);
error = __vfs_setlease(filp, arg, &ret);
- if (error) {
- spin_unlock(&inode->i_lock);
- locks_free_lock(fl);
- goto out_free_fasync;
- }
- if (ret != fl)
- locks_free_lock(fl);
+ if (error)
+ goto out_unlock;
+ if (ret == fl)
+ fl = NULL;
/*
* fasync_insert_entry() returns the old entry if any.
new = NULL;
error = __f_setown(filp, task_pid(current), PIDTYPE_PID, 0);
+out_unlock:
spin_unlock(&inode->i_lock);
-
-out_free_fasync:
+ if (fl)
+ locks_free_lock(fl);
if (new)
fasync_free(new);
return error;
struct inode * inode = file_inode(filp);
struct file_lock *fl;
struct file_lock **before;
+ LIST_HEAD(dispose);
if (!inode->i_flock)
return;
fl->fl_type, fl->fl_flags,
fl->fl_start, fl->fl_end);
- locks_delete_lock(before);
+ locks_delete_lock(before, &dispose);
continue;
}
before = &fl->fl_next;
}
spin_unlock(&inode->i_lock);
+ locks_dispose_list(&dispose);
}
/**
seq_puts(f, "FLOCK ADVISORY ");
}
} else if (IS_LEASE(fl)) {
- seq_puts(f, "LEASE ");
+ if (fl->fl_flags & FL_DELEG)
+ seq_puts(f, "DELEG ");
+ else
+ seq_puts(f, "LEASE ");
+
if (lease_breaking(fl))
seq_puts(f, "BREAKING ");
else if (fl->fl_file)
fi = udf_add_entry(dir, dentry, &fibh, &cfi, &err);
if (!fi)
- goto out_no_entry;
+ goto out_fail;
cfi.icb.extLength = cpu_to_le32(sb->s_blocksize);
cfi.icb.extLocation = cpu_to_lelb(iinfo->i_location);
if (UDF_SB(inode->i_sb)->s_lvid_bh) {
out_no_entry:
up_write(&iinfo->i_data_sem);
+out_fail:
inode_dec_link_count(inode);
iput(inode);
goto out;
}
#endif /* CONFIG_OF */
-#ifdef CONFIG_I2C_ACPI
-int acpi_i2c_install_space_handler(struct i2c_adapter *adapter);
-void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter);
+#ifdef CONFIG_ACPI
void acpi_i2c_register_devices(struct i2c_adapter *adap);
#else
static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) { }
+#endif /* CONFIG_ACPI */
+
+#ifdef CONFIG_ACPI_I2C_OPREGION
+int acpi_i2c_install_space_handler(struct i2c_adapter *adapter);
+void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter);
+#else
static inline void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter)
{ }
static inline int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
{ return 0; }
-#endif
+#endif /* CONFIG_ACPI_I2C_OPREGION */
#endif /* _LINUX_I2C_H */
mutex_lock(&module_mutex);
module_bug_cleanup(mod);
mutex_unlock(&module_mutex);
+
+ /* we can't deallocate the module until we clear memory protection */
+ unset_module_init_ro_nx(mod);
+ unset_module_core_ro_nx(mod);
+
ddebug_cleanup:
dynamic_debug_remove(info->debug);
synchronize_sched();
#define is_haswell_plus(codec) (is_haswell(codec) || is_broadwell(codec))
#define is_valleyview(codec) ((codec)->vendor_id == 0x80862882)
+#define is_cherryview(codec) ((codec)->vendor_id == 0x80862883)
+#define is_valleyview_plus(codec) (is_valleyview(codec) || is_cherryview(codec))
struct hdmi_spec_per_cvt {
hda_nid_t cvt_nid;
mux_idx);
/* configure unused pins to choose other converters */
- if (is_haswell_plus(codec) || is_valleyview(codec))
+ if (is_haswell_plus(codec) || is_valleyview_plus(codec))
intel_not_share_assigned_cvt(codec, per_pin->pin_nid, mux_idx);
snd_hda_spdif_ctls_assign(codec, pin_idx, per_cvt->cvt_nid);
* and this can make HW reset converter selection on a pin.
*/
if (eld->eld_valid && !old_eld_valid && per_pin->setup) {
- if (is_haswell_plus(codec) || is_valleyview(codec)) {
+ if (is_haswell_plus(codec) ||
+ is_valleyview_plus(codec)) {
intel_verify_pin_cvt_connect(codec, per_pin);
intel_not_share_assigned_cvt(codec, pin_nid,
per_pin->mux_idx);
bool non_pcm;
int pinctl;
- if (is_haswell_plus(codec) || is_valleyview(codec)) {
+ if (is_haswell_plus(codec) || is_valleyview_plus(codec)) {
/* Verify pin:cvt selections to avoid silent audio after S3.
* After S3, the audio driver restores pin:cvt selections
* but this can happen before gfx is ready and such selection
intel_haswell_fixup_enable_dp12(codec);
}
- if (is_haswell(codec) || is_valleyview(codec)) {
+ if (is_haswell_plus(codec) || is_valleyview_plus(codec))
codec->depop_delay = 0;
- }
if (hdmi_parse_codec(codec) < 0) {
codec->spec = NULL;
spec->pll_coef_idx);
val = snd_hda_codec_read(codec, spec->pll_nid, 0,
AC_VERB_GET_PROC_COEF, 0);
+ if (val == -1)
+ return;
snd_hda_codec_write(codec, spec->pll_nid, 0, AC_VERB_SET_COEF_INDEX,
spec->pll_coef_idx);
snd_hda_codec_write(codec, spec->pll_nid, 0, AC_VERB_SET_PROC_COEF,
static void alc269vb_toggle_power_output(struct hda_codec *codec, int power_up)
{
int val = alc_read_coef_idx(codec, 0x04);
+ if (val == -1)
+ return;
if (power_up)
val |= 1 << 11;
else
snd_hda_codec_resume_cache(codec);
alc_inv_dmic_sync(codec, true);
hda_call_check_power_status(codec, 0x01);
+
+ /* on some machine, the BIOS will clear the codec gpio data when enter
+ * suspend, and won't restore the data after resume, so we restore it
+ * in the driver.
+ */
+ if (spec->gpio_led)
+ snd_hda_codec_write(codec, codec->afg, 0, AC_VERB_SET_GPIO_DATA,
+ spec->gpio_led);
+
if (spec->has_alc5505_dsp)
alc5505_dsp_resume(codec);
if ((alc_get_coef0(codec) & 0x00ff) == 0x017) {
val = alc_read_coef_idx(codec, 0x04);
/* Power up output pin */
- alc_write_coef_idx(codec, 0x04, val | (1<<11));
+ if (val != -1)
+ alc_write_coef_idx(codec, 0x04, val | (1<<11));
}
if ((alc_get_coef0(codec) & 0x00ff) == 0x018) {
val = alc_read_coef_idx(codec, 0xd);
- if ((val & 0x0c00) >> 10 != 0x1) {
+ if (val != -1 && (val & 0x0c00) >> 10 != 0x1) {
/* Capless ramp up clock control */
alc_write_coef_idx(codec, 0xd, val | (1<<10));
}
val = alc_read_coef_idx(codec, 0x17);
- if ((val & 0x01c0) >> 6 != 0x4) {
+ if (val != -1 && (val & 0x01c0) >> 6 != 0x4) {
/* Class D power on reset */
alc_write_coef_idx(codec, 0x17, val | (1<<7));
}
}
val = alc_read_coef_idx(codec, 0xd); /* Class D */
- alc_write_coef_idx(codec, 0xd, val | (1<<14));
+ if (val != -1)
+ alc_write_coef_idx(codec, 0xd, val | (1<<14));
val = alc_read_coef_idx(codec, 0x4); /* HP */
- alc_write_coef_idx(codec, 0x4, val | (1<<11));
+ if (val != -1)
+ alc_write_coef_idx(codec, 0x4, val | (1<<11));
}
/*
else
rates = &arizona_48k_bclk_rates[0];
+ wl = snd_pcm_format_width(params_format(params));
+
if (tdm_slots) {
arizona_aif_dbg(dai, "Configuring for %d %d bit TDM slots\n",
tdm_slots, tdm_width);
channels = tdm_slots;
} else {
bclk_target = snd_soc_params_to_bclk(params);
+ tdm_width = wl;
}
if (chan_limit && chan_limit < channels) {
arizona_aif_dbg(dai, "BCLK %dHz LRCLK %dHz\n",
rates[bclk], rates[bclk] / lrclk);
- wl = snd_pcm_format_width(params_format(params));
- frame = wl << ARIZONA_AIF1TX_WL_SHIFT | wl;
+ frame = wl << ARIZONA_AIF1TX_WL_SHIFT | tdm_width;
reconfig = arizona_aif_cfg_changed(codec, base, bclk, lrclk, frame);
pcm512x_ramp_step_text);
static const struct snd_kcontrol_new pcm512x_controls[] = {
-SOC_DOUBLE_R_TLV("Playback Digital Volume", PCM512x_DIGITAL_VOLUME_2,
+SOC_DOUBLE_R_TLV("Digital Playback Volume", PCM512x_DIGITAL_VOLUME_2,
PCM512x_DIGITAL_VOLUME_3, 0, 255, 1, digital_tlv),
SOC_DOUBLE_TLV("Playback Volume", PCM512x_ANALOG_GAIN_CTRL,
PCM512x_LAGN_SHIFT, PCM512x_RAGN_SHIFT, 1, 1, analog_tlv),
SOC_DOUBLE_TLV("Playback Boost Volume", PCM512x_ANALOG_GAIN_BOOST,
PCM512x_AGBL_SHIFT, PCM512x_AGBR_SHIFT, 1, 0, boost_tlv),
-SOC_DOUBLE("Playback Digital Switch", PCM512x_MUTE, PCM512x_RQML_SHIFT,
+SOC_DOUBLE("Digital Playback Switch", PCM512x_MUTE, PCM512x_RQML_SHIFT,
PCM512x_RQMR_SHIFT, 1, 1),
SOC_SINGLE("Deemphasis Switch", PCM512x_DSP, PCM512x_DEMP_SHIFT, 1, 1),
return ret;
}
-static int davinci_mcasp_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div)
+static int __davinci_mcasp_set_clkdiv(struct snd_soc_dai *dai, int div_id,
+ int div, bool explicit)
{
struct davinci_mcasp *mcasp = snd_soc_dai_get_drvdata(dai);
ACLKXDIV(div - 1), ACLKXDIV_MASK);
mcasp_mod_bits(mcasp, DAVINCI_MCASP_ACLKRCTL_REG,
ACLKRDIV(div - 1), ACLKRDIV_MASK);
- mcasp->bclk_div = div;
+ if (explicit)
+ mcasp->bclk_div = div;
break;
case 2: /* BCLK/LRCLK ratio */
return 0;
}
+static int davinci_mcasp_set_clkdiv(struct snd_soc_dai *dai, int div_id,
+ int div)
+{
+ return __davinci_mcasp_set_clkdiv(dai, div_id, div, 1);
+}
+
static int davinci_mcasp_set_sysclk(struct snd_soc_dai *dai, int clk_id,
unsigned int freq, int dir)
{
"Inaccurate BCLK: %u Hz / %u != %u Hz\n",
mcasp->sysclk_freq, div, bclk_freq);
}
- davinci_mcasp_set_clkdiv(cpu_dai, 1, div);
+ __davinci_mcasp_set_clkdiv(cpu_dai, 1, div, 0);
}
ret = mcasp_common_hw_param(mcasp, substream->stream,
tristate "Enhanced Serial Audio Interface (ESAI) module support"
select REGMAP_MMIO
select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
- select SND_SOC_FSL_UTILS
help
Say Y if you want to add Enhanced Synchronous Audio Interface
(ESAI) support for the Freescale CPUs.
#include "fsl_esai.h"
#include "imx-pcm.h"
-#include "fsl_utils.h"
#define FSL_ESAI_RATES SNDRV_PCM_RATE_8000_192000
#define FSL_ESAI_FORMATS (SNDRV_PCM_FMTBIT_S8 | \
.hw_params = fsl_esai_hw_params,
.set_sysclk = fsl_esai_set_dai_sysclk,
.set_fmt = fsl_esai_set_dai_fmt,
- .xlate_tdm_slot_mask = fsl_asoc_xlate_tdm_slot_mask,
.set_tdm_slot = fsl_esai_set_dai_tdm_slot,
};
};
static struct sst_acpi_mach baytrail_machines[] = {
- { "10EC5640", "byt-rt5640", "intel/fw_sst_0f28.bin-i2s_master" },
- { "193C9890", "byt-max98090", "intel/fw_sst_0f28.bin-i2s_master" },
+ { "10EC5640", "byt-rt5640", "intel/fw_sst_0f28.bin-48kHz_i2s_master" },
+ { "193C9890", "byt-max98090", "intel/fw_sst_0f28.bin-48kHz_i2s_master" },
{}
};
.ops = &sst_byt_ops,
};
-int sst_byt_dsp_suspend_noirq(struct device *dev, struct sst_pdata *pdata)
+int sst_byt_dsp_suspend_late(struct device *dev, struct sst_pdata *pdata)
{
struct sst_byt *byt = pdata->dsp;
sst_byt_drop_all(byt);
dev_dbg(byt->dev, "dsp in reset\n");
- return 0;
-}
-EXPORT_SYMBOL_GPL(sst_byt_dsp_suspend_noirq);
-
-int sst_byt_dsp_suspend_late(struct device *dev, struct sst_pdata *pdata)
-{
- struct sst_byt *byt = pdata->dsp;
-
dev_dbg(byt->dev, "free all blocks and unload fw\n");
sst_fw_unload(byt->fw);
int sst_byt_dsp_init(struct device *dev, struct sst_pdata *pdata);
void sst_byt_dsp_free(struct device *dev, struct sst_pdata *pdata);
struct sst_dsp *sst_byt_get_dsp(struct sst_byt *byt);
-int sst_byt_dsp_suspend_noirq(struct device *dev, struct sst_pdata *pdata);
int sst_byt_dsp_suspend_late(struct device *dev, struct sst_pdata *pdata);
int sst_byt_dsp_boot(struct device *dev, struct sst_pdata *pdata);
int sst_byt_dsp_wait_for_ready(struct device *dev, struct sst_pdata *pdata);
/* DAI data */
struct sst_byt_pcm_data pcm[BYT_PCM_COUNT];
+
+ /* flag indicating is stream context restore needed after suspend */
+ bool restore_stream;
};
/* this may get called several times by oss emulation */
sst_byt_stream_start(byt, pcm_data->stream, 0);
break;
case SNDRV_PCM_TRIGGER_RESUME:
- schedule_work(&pcm_data->work);
+ if (pdata->restore_stream == true)
+ schedule_work(&pcm_data->work);
+ else
+ sst_byt_stream_resume(byt, pcm_data->stream);
break;
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
sst_byt_stream_resume(byt, pcm_data->stream);
sst_byt_stream_stop(byt, pcm_data->stream);
break;
case SNDRV_PCM_TRIGGER_SUSPEND:
+ pdata->restore_stream = false;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
sst_byt_stream_pause(byt, pcm_data->stream);
break;
};
#ifdef CONFIG_PM
-static int sst_byt_pcm_dev_suspend_noirq(struct device *dev)
-{
- struct sst_pdata *sst_pdata = dev_get_platdata(dev);
- int ret;
-
- dev_dbg(dev, "suspending noirq\n");
-
- /* at this point all streams will be stopped and context saved */
- ret = sst_byt_dsp_suspend_noirq(dev, sst_pdata);
- if (ret < 0) {
- dev_err(dev, "failed to suspend %d\n", ret);
- return ret;
- }
-
- return ret;
-}
-
static int sst_byt_pcm_dev_suspend_late(struct device *dev)
{
struct sst_pdata *sst_pdata = dev_get_platdata(dev);
+ struct sst_byt_priv_data *priv_data = dev_get_drvdata(dev);
int ret;
dev_dbg(dev, "suspending late\n");
return ret;
}
+ priv_data->restore_stream = true;
+
return ret;
}
static int sst_byt_pcm_dev_resume_early(struct device *dev)
{
struct sst_pdata *sst_pdata = dev_get_platdata(dev);
+ int ret;
dev_dbg(dev, "resume early\n");
/* load fw and boot DSP */
- return sst_byt_dsp_boot(dev, sst_pdata);
-}
-
-static int sst_byt_pcm_dev_resume(struct device *dev)
-{
- struct sst_pdata *sst_pdata = dev_get_platdata(dev);
-
- dev_dbg(dev, "resume\n");
+ ret = sst_byt_dsp_boot(dev, sst_pdata);
+ if (ret)
+ return ret;
/* wait for FW to finish booting */
return sst_byt_dsp_wait_for_ready(dev, sst_pdata);
}
static const struct dev_pm_ops sst_byt_pm_ops = {
- .suspend_noirq = sst_byt_pcm_dev_suspend_noirq,
.suspend_late = sst_byt_pcm_dev_suspend_late,
.resume_early = sst_byt_pcm_dev_resume_early,
- .resume = sst_byt_pcm_dev_resume,
};
#define SST_BYT_PM_OPS (&sst_byt_pm_ops)
SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \
SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
-#define PXA_SSP_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
- SNDRV_PCM_FMTBIT_S24_LE | \
- SNDRV_PCM_FMTBIT_S32_LE)
+#define PXA_SSP_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE)
static const struct snd_soc_dai_ops pxa_ssp_dai_ops = {
.startup = pxa_ssp_startup,
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kcontrol);
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
unsigned int reg_val, val;
- int ret = 0;
- if (e->reg != SND_SOC_NOPM)
- ret = soc_dapm_read(dapm, e->reg, ®_val);
- else
+ if (e->reg != SND_SOC_NOPM) {
+ int ret = soc_dapm_read(dapm, e->reg, ®_val);
+ if (ret)
+ return ret;
+ } else {
reg_val = dapm_kcontrol_get_value(kcontrol);
+ }
val = (reg_val >> e->shift_l) & e->mask;
ucontrol->value.enumerated.item[0] = snd_soc_enum_val_to_item(e, val);
ucontrol->value.enumerated.item[1] = val;
}
- return ret;
+ return 0;
}
EXPORT_SYMBOL_GPL(snd_soc_dapm_get_enum_double);
/*
* Example Format w/ field column widths:
*
- * Package Core CPU Avg_MHz Bzy_MHz TSC_MHz SMI %Busy CPU_%c1 CPU_%c3 CPU_%c6 CPU_%c7 CoreTmp PkgTmp Pkg%pc2 Pkg%pc3 Pkg%pc6 Pkg%pc7 PkgWatt CorWatt GFXWatt
- * 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567
+ * Package Core CPU Avg_MHz Bzy_MHz TSC_MHz SMI %Busy CPU_%c1 CPU_%c3 CPU_%c6 CPU_%c7 CoreTmp PkgTmp Pkg%pc2 Pkg%pc3 Pkg%pc6 Pkg%pc7 PkgWatt CorWatt GFXWatt
+ * 123456781234567812345678123456781234567812345678123456781234567812345678123456781234567812345678123456781234567812345678123456781234567812345678123456781234567812345678
*/
void print_header(void)
{
if (show_pkg)
- outp += sprintf(outp, "Package ");
+ outp += sprintf(outp, " Package");
if (show_core)
- outp += sprintf(outp, " Core ");
+ outp += sprintf(outp, " Core");
if (show_cpu)
- outp += sprintf(outp, " CPU ");
+ outp += sprintf(outp, " CPU");
if (has_aperf)
- outp += sprintf(outp, "Avg_MHz ");
+ outp += sprintf(outp, " Avg_MHz");
if (do_nhm_cstates)
- outp += sprintf(outp, " %%Busy ");
+ outp += sprintf(outp, " %%Busy");
if (has_aperf)
- outp += sprintf(outp, "Bzy_MHz ");
- outp += sprintf(outp, "TSC_MHz ");
+ outp += sprintf(outp, " Bzy_MHz");
+ outp += sprintf(outp, " TSC_MHz");
if (do_smi)
- outp += sprintf(outp, " SMI ");
+ outp += sprintf(outp, " SMI");
if (extra_delta_offset32)
- outp += sprintf(outp, " count 0x%03X ", extra_delta_offset32);
+ outp += sprintf(outp, " count 0x%03X", extra_delta_offset32);
if (extra_delta_offset64)
- outp += sprintf(outp, " COUNT 0x%03X ", extra_delta_offset64);
+ outp += sprintf(outp, " COUNT 0x%03X", extra_delta_offset64);
if (extra_msr_offset32)
- outp += sprintf(outp, " MSR 0x%03X ", extra_msr_offset32);
+ outp += sprintf(outp, " MSR 0x%03X", extra_msr_offset32);
if (extra_msr_offset64)
- outp += sprintf(outp, " MSR 0x%03X ", extra_msr_offset64);
+ outp += sprintf(outp, " MSR 0x%03X", extra_msr_offset64);
if (do_nhm_cstates)
- outp += sprintf(outp, " CPU%%c1 ");
+ outp += sprintf(outp, " CPU%%c1");
if (do_nhm_cstates && !do_slm_cstates)
- outp += sprintf(outp, " CPU%%c3 ");
+ outp += sprintf(outp, " CPU%%c3");
if (do_nhm_cstates)
- outp += sprintf(outp, " CPU%%c6 ");
+ outp += sprintf(outp, " CPU%%c6");
if (do_snb_cstates)
- outp += sprintf(outp, " CPU%%c7 ");
+ outp += sprintf(outp, " CPU%%c7");
if (do_dts)
- outp += sprintf(outp, "CoreTmp ");
+ outp += sprintf(outp, " CoreTmp");
if (do_ptm)
- outp += sprintf(outp, " PkgTmp ");
+ outp += sprintf(outp, " PkgTmp");
if (do_snb_cstates)
- outp += sprintf(outp, "Pkg%%pc2 ");
+ outp += sprintf(outp, " Pkg%%pc2");
if (do_nhm_cstates && !do_slm_cstates)
- outp += sprintf(outp, "Pkg%%pc3 ");
+ outp += sprintf(outp, " Pkg%%pc3");
if (do_nhm_cstates && !do_slm_cstates)
- outp += sprintf(outp, "Pkg%%pc6 ");
+ outp += sprintf(outp, " Pkg%%pc6");
if (do_snb_cstates)
- outp += sprintf(outp, "Pkg%%pc7 ");
+ outp += sprintf(outp, " Pkg%%pc7");
if (do_c8_c9_c10) {
- outp += sprintf(outp, "Pkg%%pc8 ");
- outp += sprintf(outp, "Pkg%%pc9 ");
- outp += sprintf(outp, "Pk%%pc10 ");
+ outp += sprintf(outp, " Pkg%%pc8");
+ outp += sprintf(outp, " Pkg%%pc9");
+ outp += sprintf(outp, " Pk%%pc10");
}
if (do_rapl && !rapl_joules) {
if (do_rapl & RAPL_PKG)
- outp += sprintf(outp, "PkgWatt ");
+ outp += sprintf(outp, " PkgWatt");
if (do_rapl & RAPL_CORES)
- outp += sprintf(outp, "CorWatt ");
+ outp += sprintf(outp, " CorWatt");
if (do_rapl & RAPL_GFX)
- outp += sprintf(outp, "GFXWatt ");
+ outp += sprintf(outp, " GFXWatt");
if (do_rapl & RAPL_DRAM)
- outp += sprintf(outp, "RAMWatt ");
+ outp += sprintf(outp, " RAMWatt");
if (do_rapl & RAPL_PKG_PERF_STATUS)
- outp += sprintf(outp, " PKG_%% ");
+ outp += sprintf(outp, " PKG_%%");
if (do_rapl & RAPL_DRAM_PERF_STATUS)
- outp += sprintf(outp, " RAM_%% ");
+ outp += sprintf(outp, " RAM_%%");
} else {
if (do_rapl & RAPL_PKG)
- outp += sprintf(outp, " Pkg_J ");
+ outp += sprintf(outp, " Pkg_J");
if (do_rapl & RAPL_CORES)
- outp += sprintf(outp, " Cor_J ");
+ outp += sprintf(outp, " Cor_J");
if (do_rapl & RAPL_GFX)
- outp += sprintf(outp, " GFX_J ");
+ outp += sprintf(outp, " GFX_J");
if (do_rapl & RAPL_DRAM)
- outp += sprintf(outp, " RAM_W ");
+ outp += sprintf(outp, " RAM_W");
if (do_rapl & RAPL_PKG_PERF_STATUS)
- outp += sprintf(outp, " PKG_%% ");
+ outp += sprintf(outp, " PKG_%%");
if (do_rapl & RAPL_DRAM_PERF_STATUS)
- outp += sprintf(outp, " RAM_%% ");
- outp += sprintf(outp, " time ");
+ outp += sprintf(outp, " RAM_%%");
+ outp += sprintf(outp, " time");
}
outp += sprintf(outp, "\n");
dev->irq_requested_type |= guest_irq_type;
if (dev->ack_notifier.gsi != -1)
kvm_register_irq_ack_notifier(kvm, &dev->ack_notifier);
- } else
+ } else {
kvm_free_irq_source_id(kvm, dev->irq_source_id);
+ dev->irq_source_id = -1;
+ }
return r;
}
return pfn;
}
+static void kvm_unpin_pages(struct kvm *kvm, pfn_t pfn, unsigned long npages)
+{
+ unsigned long i;
+
+ for (i = 0; i < npages; ++i)
+ kvm_release_pfn_clean(pfn + i);
+}
+
int kvm_iommu_map_pages(struct kvm *kvm, struct kvm_memory_slot *slot)
{
gfn_t gfn, end_gfn;
if (r) {
printk(KERN_ERR "kvm_iommu_map_address:"
"iommu failed to map pfn=%llx\n", pfn);
+ kvm_unpin_pages(kvm, pfn, page_size);
goto unmap_pages;
}
return 0;
unmap_pages:
- kvm_iommu_put_pages(kvm, slot->base_gfn, gfn);
+ kvm_iommu_put_pages(kvm, slot->base_gfn, gfn - slot->base_gfn);
return r;
}
return r;
}
-static void kvm_unpin_pages(struct kvm *kvm, pfn_t pfn, unsigned long npages)
-{
- unsigned long i;
-
- for (i = 0; i < npages; ++i)
- kvm_release_pfn_clean(pfn + i);
-}
-
static void kvm_iommu_put_pages(struct kvm *kvm,
gfn_t base_gfn, unsigned long npages)
{