-header-y += inftl-user.h
-header-y += mtd-abi.h
-header-y += mtd-user.h
-header-y += nftl-user.h
-header-y += ubi-user.h
+++ /dev/null
-/*
- * Parts of INFTL headers shared with userspace
- *
- */
-
-#ifndef __MTD_INFTL_USER_H__
-#define __MTD_INFTL_USER_H__
-
-#include <linux/types.h>
-
-#define OSAK_VERSION 0x5120
-#define PERCENTUSED 98
-
-#define SECTORSIZE 512
-
-/* Block Control Information */
-
-struct inftl_bci {
- __u8 ECCsig[6];
- __u8 Status;
- __u8 Status1;
-} __attribute__((packed));
-
-struct inftl_unithead1 {
- __u16 virtualUnitNo;
- __u16 prevUnitNo;
- __u8 ANAC;
- __u8 NACs;
- __u8 parityPerField;
- __u8 discarded;
-} __attribute__((packed));
-
-struct inftl_unithead2 {
- __u8 parityPerField;
- __u8 ANAC;
- __u16 prevUnitNo;
- __u16 virtualUnitNo;
- __u8 NACs;
- __u8 discarded;
-} __attribute__((packed));
-
-struct inftl_unittail {
- __u8 Reserved[4];
- __u16 EraseMark;
- __u16 EraseMark1;
-} __attribute__((packed));
-
-union inftl_uci {
- struct inftl_unithead1 a;
- struct inftl_unithead2 b;
- struct inftl_unittail c;
-};
-
-struct inftl_oob {
- struct inftl_bci b;
- union inftl_uci u;
-};
-
-
-/* INFTL Media Header */
-
-struct INFTLPartition {
- __u32 virtualUnits;
- __u32 firstUnit;
- __u32 lastUnit;
- __u32 flags;
- __u32 spareUnits;
- __u32 Reserved0;
- __u32 Reserved1;
-} __attribute__((packed));
-
-struct INFTLMediaHeader {
- char bootRecordID[8];
- __u32 NoOfBootImageBlocks;
- __u32 NoOfBinaryPartitions;
- __u32 NoOfBDTLPartitions;
- __u32 BlockMultiplierBits;
- __u32 FormatFlags;
- __u32 OsakVersion;
- __u32 PercentUsed;
- struct INFTLPartition Partitions[4];
-} __attribute__((packed));
-
-/* Partition flag types */
-#define INFTL_BINARY 0x20000000
-#define INFTL_BDTL 0x40000000
-#define INFTL_LAST 0x80000000
-
-#endif /* __MTD_INFTL_USER_H__ */
-
-
+++ /dev/null
-/*
- * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> et al.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- */
-
-#ifndef __MTD_ABI_H__
-#define __MTD_ABI_H__
-
-#include <linux/types.h>
-
-struct erase_info_user {
- __u32 start;
- __u32 length;
-};
-
-struct erase_info_user64 {
- __u64 start;
- __u64 length;
-};
-
-struct mtd_oob_buf {
- __u32 start;
- __u32 length;
- unsigned char __user *ptr;
-};
-
-struct mtd_oob_buf64 {
- __u64 start;
- __u32 pad;
- __u32 length;
- __u64 usr_ptr;
-};
-
-/**
- * MTD operation modes
- *
- * @MTD_OPS_PLACE_OOB: OOB data are placed at the given offset (default)
- * @MTD_OPS_AUTO_OOB: OOB data are automatically placed at the free areas
- * which are defined by the internal ecclayout
- * @MTD_OPS_RAW: data are transferred as-is, with no error correction;
- * this mode implies %MTD_OPS_PLACE_OOB
- *
- * These modes can be passed to ioctl(MEMWRITE) and are also used internally.
- * See notes on "MTD file modes" for discussion on %MTD_OPS_RAW vs.
- * %MTD_FILE_MODE_RAW.
- */
-enum {
- MTD_OPS_PLACE_OOB = 0,
- MTD_OPS_AUTO_OOB = 1,
- MTD_OPS_RAW = 2,
-};
-
-/**
- * struct mtd_write_req - data structure for requesting a write operation
- *
- * @start: start address
- * @len: length of data buffer
- * @ooblen: length of OOB buffer
- * @usr_data: user-provided data buffer
- * @usr_oob: user-provided OOB buffer
- * @mode: MTD mode (see "MTD operation modes")
- * @padding: reserved, must be set to 0
- *
- * This structure supports ioctl(MEMWRITE) operations, allowing data and/or OOB
- * writes in various modes. To write to OOB-only, set @usr_data == NULL, and to
- * write data-only, set @usr_oob == NULL. However, setting both @usr_data and
- * @usr_oob to NULL is not allowed.
- */
-struct mtd_write_req {
- __u64 start;
- __u64 len;
- __u64 ooblen;
- __u64 usr_data;
- __u64 usr_oob;
- __u8 mode;
- __u8 padding[7];
-};
-
-#define MTD_ABSENT 0
-#define MTD_RAM 1
-#define MTD_ROM 2
-#define MTD_NORFLASH 3
-#define MTD_NANDFLASH 4
-#define MTD_DATAFLASH 6
-#define MTD_UBIVOLUME 7
-#define MTD_MLCNANDFLASH 8
-
-#define MTD_WRITEABLE 0x400 /* Device is writeable */
-#define MTD_BIT_WRITEABLE 0x800 /* Single bits can be flipped */
-#define MTD_NO_ERASE 0x1000 /* No erase necessary */
-#define MTD_POWERUP_LOCK 0x2000 /* Always locked after reset */
-
-/* Some common devices / combinations of capabilities */
-#define MTD_CAP_ROM 0
-#define MTD_CAP_RAM (MTD_WRITEABLE | MTD_BIT_WRITEABLE | MTD_NO_ERASE)
-#define MTD_CAP_NORFLASH (MTD_WRITEABLE | MTD_BIT_WRITEABLE)
-#define MTD_CAP_NANDFLASH (MTD_WRITEABLE)
-
-/* Obsolete ECC byte placement modes (used with obsolete MEMGETOOBSEL) */
-#define MTD_NANDECC_OFF 0 // Switch off ECC (Not recommended)
-#define MTD_NANDECC_PLACE 1 // Use the given placement in the structure (YAFFS1 legacy mode)
-#define MTD_NANDECC_AUTOPLACE 2 // Use the default placement scheme
-#define MTD_NANDECC_PLACEONLY 3 // Use the given placement in the structure (Do not store ecc result on read)
-#define MTD_NANDECC_AUTOPL_USR 4 // Use the given autoplacement scheme rather than using the default
-
-/* OTP mode selection */
-#define MTD_OTP_OFF 0
-#define MTD_OTP_FACTORY 1
-#define MTD_OTP_USER 2
-
-struct mtd_info_user {
- __u8 type;
- __u32 flags;
- __u32 size; /* Total size of the MTD */
- __u32 erasesize;
- __u32 writesize;
- __u32 oobsize; /* Amount of OOB data per block (e.g. 16) */
- __u64 padding; /* Old obsolete field; do not use */
-};
-
-struct region_info_user {
- __u32 offset; /* At which this region starts,
- * from the beginning of the MTD */
- __u32 erasesize; /* For this region */
- __u32 numblocks; /* Number of blocks in this region */
- __u32 regionindex;
-};
-
-struct otp_info {
- __u32 start;
- __u32 length;
- __u32 locked;
-};
-
-/*
- * Note, the following ioctl existed in the past and was removed:
- * #define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo)
- * Try to avoid adding a new ioctl with the same ioctl number.
- */
-
-/* Get basic MTD characteristics info (better to use sysfs) */
-#define MEMGETINFO _IOR('M', 1, struct mtd_info_user)
-/* Erase segment of MTD */
-#define MEMERASE _IOW('M', 2, struct erase_info_user)
-/* Write out-of-band data from MTD */
-#define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf)
-/* Read out-of-band data from MTD */
-#define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf)
-/* Lock a chip (for MTD that supports it) */
-#define MEMLOCK _IOW('M', 5, struct erase_info_user)
-/* Unlock a chip (for MTD that supports it) */
-#define MEMUNLOCK _IOW('M', 6, struct erase_info_user)
-/* Get the number of different erase regions */
-#define MEMGETREGIONCOUNT _IOR('M', 7, int)
-/* Get information about the erase region for a specific index */
-#define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user)
-/* Get info about OOB modes (e.g., RAW, PLACE, AUTO) - legacy interface */
-#define MEMGETOOBSEL _IOR('M', 10, struct nand_oobinfo)
-/* Check if an eraseblock is bad */
-#define MEMGETBADBLOCK _IOW('M', 11, __kernel_loff_t)
-/* Mark an eraseblock as bad */
-#define MEMSETBADBLOCK _IOW('M', 12, __kernel_loff_t)
-/* Set OTP (One-Time Programmable) mode (factory vs. user) */
-#define OTPSELECT _IOR('M', 13, int)
-/* Get number of OTP (One-Time Programmable) regions */
-#define OTPGETREGIONCOUNT _IOW('M', 14, int)
-/* Get all OTP (One-Time Programmable) info about MTD */
-#define OTPGETREGIONINFO _IOW('M', 15, struct otp_info)
-/* Lock a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */
-#define OTPLOCK _IOR('M', 16, struct otp_info)
-/* Get ECC layout (deprecated) */
-#define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout_user)
-/* Get statistics about corrected/uncorrected errors */
-#define ECCGETSTATS _IOR('M', 18, struct mtd_ecc_stats)
-/* Set MTD mode on a per-file-descriptor basis (see "MTD file modes") */
-#define MTDFILEMODE _IO('M', 19)
-/* Erase segment of MTD (supports 64-bit address) */
-#define MEMERASE64 _IOW('M', 20, struct erase_info_user64)
-/* Write data to OOB (64-bit version) */
-#define MEMWRITEOOB64 _IOWR('M', 21, struct mtd_oob_buf64)
-/* Read data from OOB (64-bit version) */
-#define MEMREADOOB64 _IOWR('M', 22, struct mtd_oob_buf64)
-/* Check if chip is locked (for MTD that supports it) */
-#define MEMISLOCKED _IOR('M', 23, struct erase_info_user)
-/*
- * Most generic write interface; can write in-band and/or out-of-band in various
- * modes (see "struct mtd_write_req"). This ioctl is not supported for flashes
- * without OOB, e.g., NOR flash.
- */
-#define MEMWRITE _IOWR('M', 24, struct mtd_write_req)
-
-/*
- * Obsolete legacy interface. Keep it in order not to break userspace
- * interfaces
- */
-struct nand_oobinfo {
- __u32 useecc;
- __u32 eccbytes;
- __u32 oobfree[8][2];
- __u32 eccpos[32];
-};
-
-struct nand_oobfree {
- __u32 offset;
- __u32 length;
-};
-
-#define MTD_MAX_OOBFREE_ENTRIES 8
-#define MTD_MAX_ECCPOS_ENTRIES 64
-/*
- * OBSOLETE: ECC layout control structure. Exported to user-space via ioctl
- * ECCGETLAYOUT for backwards compatbility and should not be mistaken as a
- * complete set of ECC information. The ioctl truncates the larger internal
- * structure to retain binary compatibility with the static declaration of the
- * ioctl. Note that the "MTD_MAX_..._ENTRIES" macros represent the max size of
- * the user struct, not the MAX size of the internal struct nand_ecclayout.
- */
-struct nand_ecclayout_user {
- __u32 eccbytes;
- __u32 eccpos[MTD_MAX_ECCPOS_ENTRIES];
- __u32 oobavail;
- struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES];
-};
-
-/**
- * struct mtd_ecc_stats - error correction stats
- *
- * @corrected: number of corrected bits
- * @failed: number of uncorrectable errors
- * @badblocks: number of bad blocks in this partition
- * @bbtblocks: number of blocks reserved for bad block tables
- */
-struct mtd_ecc_stats {
- __u32 corrected;
- __u32 failed;
- __u32 badblocks;
- __u32 bbtblocks;
-};
-
-/*
- * MTD file modes - for read/write access to MTD
- *
- * @MTD_FILE_MODE_NORMAL: OTP disabled, ECC enabled
- * @MTD_FILE_MODE_OTP_FACTORY: OTP enabled in factory mode
- * @MTD_FILE_MODE_OTP_USER: OTP enabled in user mode
- * @MTD_FILE_MODE_RAW: OTP disabled, ECC disabled
- *
- * These modes can be set via ioctl(MTDFILEMODE). The mode mode will be retained
- * separately for each open file descriptor.
- *
- * Note: %MTD_FILE_MODE_RAW provides the same functionality as %MTD_OPS_RAW -
- * raw access to the flash, without error correction or autoplacement schemes.
- * Wherever possible, the MTD_OPS_* mode will override the MTD_FILE_MODE_* mode
- * (e.g., when using ioctl(MEMWRITE)), but in some cases, the MTD_FILE_MODE is
- * used out of necessity (e.g., `write()', ioctl(MEMWRITEOOB64)).
- */
-enum mtd_file_modes {
- MTD_FILE_MODE_NORMAL = MTD_OTP_OFF,
- MTD_FILE_MODE_OTP_FACTORY = MTD_OTP_FACTORY,
- MTD_FILE_MODE_OTP_USER = MTD_OTP_USER,
- MTD_FILE_MODE_RAW,
-};
-
-#endif /* __MTD_ABI_H__ */
+++ /dev/null
-/*
- * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- */
-
-#ifndef __MTD_USER_H__
-#define __MTD_USER_H__
-
-#include <stdint.h>
-
-/* This file is blessed for inclusion by userspace */
-#include <mtd/mtd-abi.h>
-
-typedef struct mtd_info_user mtd_info_t;
-typedef struct erase_info_user erase_info_t;
-typedef struct region_info_user region_info_t;
-typedef struct nand_oobinfo nand_oobinfo_t;
-typedef struct nand_ecclayout_user nand_ecclayout_t;
-
-#endif /* __MTD_USER_H__ */
+++ /dev/null
-/*
- * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- */
-
-#ifndef __MTD_NFTL_USER_H__
-#define __MTD_NFTL_USER_H__
-
-#include <linux/types.h>
-
-/* Block Control Information */
-
-struct nftl_bci {
- unsigned char ECCSig[6];
- __u8 Status;
- __u8 Status1;
-}__attribute__((packed));
-
-/* Unit Control Information */
-
-struct nftl_uci0 {
- __u16 VirtUnitNum;
- __u16 ReplUnitNum;
- __u16 SpareVirtUnitNum;
- __u16 SpareReplUnitNum;
-} __attribute__((packed));
-
-struct nftl_uci1 {
- __u32 WearInfo;
- __u16 EraseMark;
- __u16 EraseMark1;
-} __attribute__((packed));
-
-struct nftl_uci2 {
- __u16 FoldMark;
- __u16 FoldMark1;
- __u32 unused;
-} __attribute__((packed));
-
-union nftl_uci {
- struct nftl_uci0 a;
- struct nftl_uci1 b;
- struct nftl_uci2 c;
-};
-
-struct nftl_oob {
- struct nftl_bci b;
- union nftl_uci u;
-};
-
-/* NFTL Media Header */
-
-struct NFTLMediaHeader {
- char DataOrgID[6];
- __u16 NumEraseUnits;
- __u16 FirstPhysicalEUN;
- __u32 FormattedSize;
- unsigned char UnitSizeFactor;
-} __attribute__((packed));
-
-#define MAX_ERASE_ZONES (8192 - 512)
-
-#define ERASE_MARK 0x3c69
-#define SECTOR_FREE 0xff
-#define SECTOR_USED 0x55
-#define SECTOR_IGNORE 0x11
-#define SECTOR_DELETED 0x00
-
-#define FOLD_MARK_IN_PROGRESS 0x5555
-
-#define ZONE_GOOD 0xff
-#define ZONE_BAD_ORIGINAL 0
-#define ZONE_BAD_MARKED 7
-
-
-#endif /* __MTD_NFTL_USER_H__ */
+++ /dev/null
-/*
- * Copyright © International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Author: Artem Bityutskiy (Битюцкий Артём)
- */
-
-#ifndef __UBI_USER_H__
-#define __UBI_USER_H__
-
-#include <linux/types.h>
-
-/*
- * UBI device creation (the same as MTD device attachment)
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- * MTD devices may be attached using %UBI_IOCATT ioctl command of the UBI
- * control device. The caller has to properly fill and pass
- * &struct ubi_attach_req object - UBI will attach the MTD device specified in
- * the request and return the newly created UBI device number as the ioctl
- * return value.
- *
- * UBI device deletion (the same as MTD device detachment)
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- * An UBI device maybe deleted with %UBI_IOCDET ioctl command of the UBI
- * control device.
- *
- * UBI volume creation
- * ~~~~~~~~~~~~~~~~~~~
- *
- * UBI volumes are created via the %UBI_IOCMKVOL ioctl command of UBI character
- * device. A &struct ubi_mkvol_req object has to be properly filled and a
- * pointer to it has to be passed to the ioctl.
- *
- * UBI volume deletion
- * ~~~~~~~~~~~~~~~~~~~
- *
- * To delete a volume, the %UBI_IOCRMVOL ioctl command of the UBI character
- * device should be used. A pointer to the 32-bit volume ID hast to be passed
- * to the ioctl.
- *
- * UBI volume re-size
- * ~~~~~~~~~~~~~~~~~~
- *
- * To re-size a volume, the %UBI_IOCRSVOL ioctl command of the UBI character
- * device should be used. A &struct ubi_rsvol_req object has to be properly
- * filled and a pointer to it has to be passed to the ioctl.
- *
- * UBI volumes re-name
- * ~~~~~~~~~~~~~~~~~~~
- *
- * To re-name several volumes atomically at one go, the %UBI_IOCRNVOL command
- * of the UBI character device should be used. A &struct ubi_rnvol_req object
- * has to be properly filled and a pointer to it has to be passed to the ioctl.
- *
- * UBI volume update
- * ~~~~~~~~~~~~~~~~~
- *
- * Volume update should be done via the %UBI_IOCVOLUP ioctl command of the
- * corresponding UBI volume character device. A pointer to a 64-bit update
- * size should be passed to the ioctl. After this, UBI expects user to write
- * this number of bytes to the volume character device. The update is finished
- * when the claimed number of bytes is passed. So, the volume update sequence
- * is something like:
- *
- * fd = open("/dev/my_volume");
- * ioctl(fd, UBI_IOCVOLUP, &image_size);
- * write(fd, buf, image_size);
- * close(fd);
- *
- * Logical eraseblock erase
- * ~~~~~~~~~~~~~~~~~~~~~~~~
- *
- * To erase a logical eraseblock, the %UBI_IOCEBER ioctl command of the
- * corresponding UBI volume character device should be used. This command
- * unmaps the requested logical eraseblock, makes sure the corresponding
- * physical eraseblock is successfully erased, and returns.
- *
- * Atomic logical eraseblock change
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- * Atomic logical eraseblock change operation is called using the %UBI_IOCEBCH
- * ioctl command of the corresponding UBI volume character device. A pointer to
- * a &struct ubi_leb_change_req object has to be passed to the ioctl. Then the
- * user is expected to write the requested amount of bytes (similarly to what
- * should be done in case of the "volume update" ioctl).
- *
- * Logical eraseblock map
- * ~~~~~~~~~~~~~~~~~~~~~
- *
- * To map a logical eraseblock to a physical eraseblock, the %UBI_IOCEBMAP
- * ioctl command should be used. A pointer to a &struct ubi_map_req object is
- * expected to be passed. The ioctl maps the requested logical eraseblock to
- * a physical eraseblock and returns. Only non-mapped logical eraseblocks can
- * be mapped. If the logical eraseblock specified in the request is already
- * mapped to a physical eraseblock, the ioctl fails and returns error.
- *
- * Logical eraseblock unmap
- * ~~~~~~~~~~~~~~~~~~~~~~~~
- *
- * To unmap a logical eraseblock to a physical eraseblock, the %UBI_IOCEBUNMAP
- * ioctl command should be used. The ioctl unmaps the logical eraseblocks,
- * schedules corresponding physical eraseblock for erasure, and returns. Unlike
- * the "LEB erase" command, it does not wait for the physical eraseblock being
- * erased. Note, the side effect of this is that if an unclean reboot happens
- * after the unmap ioctl returns, you may find the LEB mapped again to the same
- * physical eraseblock after the UBI is run again.
- *
- * Check if logical eraseblock is mapped
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- * To check if a logical eraseblock is mapped to a physical eraseblock, the
- * %UBI_IOCEBISMAP ioctl command should be used. It returns %0 if the LEB is
- * not mapped, and %1 if it is mapped.
- *
- * Set an UBI volume property
- * ~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- * To set an UBI volume property the %UBI_IOCSETPROP ioctl command should be
- * used. A pointer to a &struct ubi_set_vol_prop_req object is expected to be
- * passed. The object describes which property should be set, and to which value
- * it should be set.
- */
-
-/*
- * When a new UBI volume or UBI device is created, users may either specify the
- * volume/device number they want to create or to let UBI automatically assign
- * the number using these constants.
- */
-#define UBI_VOL_NUM_AUTO (-1)
-#define UBI_DEV_NUM_AUTO (-1)
-
-/* Maximum volume name length */
-#define UBI_MAX_VOLUME_NAME 127
-
-/* ioctl commands of UBI character devices */
-
-#define UBI_IOC_MAGIC 'o'
-
-/* Create an UBI volume */
-#define UBI_IOCMKVOL _IOW(UBI_IOC_MAGIC, 0, struct ubi_mkvol_req)
-/* Remove an UBI volume */
-#define UBI_IOCRMVOL _IOW(UBI_IOC_MAGIC, 1, __s32)
-/* Re-size an UBI volume */
-#define UBI_IOCRSVOL _IOW(UBI_IOC_MAGIC, 2, struct ubi_rsvol_req)
-/* Re-name volumes */
-#define UBI_IOCRNVOL _IOW(UBI_IOC_MAGIC, 3, struct ubi_rnvol_req)
-
-/* ioctl commands of the UBI control character device */
-
-#define UBI_CTRL_IOC_MAGIC 'o'
-
-/* Attach an MTD device */
-#define UBI_IOCATT _IOW(UBI_CTRL_IOC_MAGIC, 64, struct ubi_attach_req)
-/* Detach an MTD device */
-#define UBI_IOCDET _IOW(UBI_CTRL_IOC_MAGIC, 65, __s32)
-
-/* ioctl commands of UBI volume character devices */
-
-#define UBI_VOL_IOC_MAGIC 'O'
-
-/* Start UBI volume update */
-#define UBI_IOCVOLUP _IOW(UBI_VOL_IOC_MAGIC, 0, __s64)
-/* LEB erasure command, used for debugging, disabled by default */
-#define UBI_IOCEBER _IOW(UBI_VOL_IOC_MAGIC, 1, __s32)
-/* Atomic LEB change command */
-#define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, __s32)
-/* Map LEB command */
-#define UBI_IOCEBMAP _IOW(UBI_VOL_IOC_MAGIC, 3, struct ubi_map_req)
-/* Unmap LEB command */
-#define UBI_IOCEBUNMAP _IOW(UBI_VOL_IOC_MAGIC, 4, __s32)
-/* Check if LEB is mapped command */
-#define UBI_IOCEBISMAP _IOR(UBI_VOL_IOC_MAGIC, 5, __s32)
-/* Set an UBI volume property */
-#define UBI_IOCSETVOLPROP _IOW(UBI_VOL_IOC_MAGIC, 6, \
- struct ubi_set_vol_prop_req)
-
-/* Maximum MTD device name length supported by UBI */
-#define MAX_UBI_MTD_NAME_LEN 127
-
-/* Maximum amount of UBI volumes that can be re-named at one go */
-#define UBI_MAX_RNVOL 32
-
-/*
- * UBI volume type constants.
- *
- * @UBI_DYNAMIC_VOLUME: dynamic volume
- * @UBI_STATIC_VOLUME: static volume
- */
-enum {
- UBI_DYNAMIC_VOLUME = 3,
- UBI_STATIC_VOLUME = 4,
-};
-
-/*
- * UBI set volume property ioctl constants.
- *
- * @UBI_VOL_PROP_DIRECT_WRITE: allow (any non-zero value) or disallow (value 0)
- * user to directly write and erase individual
- * eraseblocks on dynamic volumes
- */
-enum {
- UBI_VOL_PROP_DIRECT_WRITE = 1,
-};
-
-/**
- * struct ubi_attach_req - attach MTD device request.
- * @ubi_num: UBI device number to create
- * @mtd_num: MTD device number to attach
- * @vid_hdr_offset: VID header offset (use defaults if %0)
- * @max_beb_per1024: maximum expected number of bad PEB per 1024 PEBs
- * @padding: reserved for future, not used, has to be zeroed
- *
- * This data structure is used to specify MTD device UBI has to attach and the
- * parameters it has to use. The number which should be assigned to the new UBI
- * device is passed in @ubi_num. UBI may automatically assign the number if
- * @UBI_DEV_NUM_AUTO is passed. In this case, the device number is returned in
- * @ubi_num.
- *
- * Most applications should pass %0 in @vid_hdr_offset to make UBI use default
- * offset of the VID header within physical eraseblocks. The default offset is
- * the next min. I/O unit after the EC header. For example, it will be offset
- * 512 in case of a 512 bytes page NAND flash with no sub-page support. Or
- * it will be 512 in case of a 2KiB page NAND flash with 4 512-byte sub-pages.
- *
- * But in rare cases, if this optimizes things, the VID header may be placed to
- * a different offset. For example, the boot-loader might do things faster if
- * the VID header sits at the end of the first 2KiB NAND page with 4 sub-pages.
- * As the boot-loader would not normally need to read EC headers (unless it
- * needs UBI in RW mode), it might be faster to calculate ECC. This is weird
- * example, but it real-life example. So, in this example, @vid_hdr_offer would
- * be 2KiB-64 bytes = 1984. Note, that this position is not even 512-bytes
- * aligned, which is OK, as UBI is clever enough to realize this is 4th
- * sub-page of the first page and add needed padding.
- *
- * The @max_beb_per1024 is the maximum amount of bad PEBs UBI expects on the
- * UBI device per 1024 eraseblocks. This value is often given in an other form
- * in the NAND datasheet (min NVB i.e. minimal number of valid blocks). The
- * maximum expected bad eraseblocks per 1024 is then:
- * 1024 * (1 - MinNVB / MaxNVB)
- * Which gives 20 for most NAND devices. This limit is used in order to derive
- * amount of eraseblock UBI reserves for handling new bad blocks. If the device
- * has more bad eraseblocks than this limit, UBI does not reserve any physical
- * eraseblocks for new bad eraseblocks, but attempts to use available
- * eraseblocks (if any). The accepted range is 0-768. If 0 is given, the
- * default kernel value of %CONFIG_MTD_UBI_BEB_LIMIT will be used.
- */
-struct ubi_attach_req {
- __s32 ubi_num;
- __s32 mtd_num;
- __s32 vid_hdr_offset;
- __s16 max_beb_per1024;
- __s8 padding[10];
-};
-
-/**
- * struct ubi_mkvol_req - volume description data structure used in
- * volume creation requests.
- * @vol_id: volume number
- * @alignment: volume alignment
- * @bytes: volume size in bytes
- * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
- * @padding1: reserved for future, not used, has to be zeroed
- * @name_len: volume name length
- * @padding2: reserved for future, not used, has to be zeroed
- * @name: volume name
- *
- * This structure is used by user-space programs when creating new volumes. The
- * @used_bytes field is only necessary when creating static volumes.
- *
- * The @alignment field specifies the required alignment of the volume logical
- * eraseblock. This means, that the size of logical eraseblocks will be aligned
- * to this number, i.e.,
- * (UBI device logical eraseblock size) mod (@alignment) = 0.
- *
- * To put it differently, the logical eraseblock of this volume may be slightly
- * shortened in order to make it properly aligned. The alignment has to be
- * multiple of the flash minimal input/output unit, or %1 to utilize the entire
- * available space of logical eraseblocks.
- *
- * The @alignment field may be useful, for example, when one wants to maintain
- * a block device on top of an UBI volume. In this case, it is desirable to fit
- * an integer number of blocks in logical eraseblocks of this UBI volume. With
- * alignment it is possible to update this volume using plane UBI volume image
- * BLOBs, without caring about how to properly align them.
- */
-struct ubi_mkvol_req {
- __s32 vol_id;
- __s32 alignment;
- __s64 bytes;
- __s8 vol_type;
- __s8 padding1;
- __s16 name_len;
- __s8 padding2[4];
- char name[UBI_MAX_VOLUME_NAME + 1];
-} __packed;
-
-/**
- * struct ubi_rsvol_req - a data structure used in volume re-size requests.
- * @vol_id: ID of the volume to re-size
- * @bytes: new size of the volume in bytes
- *
- * Re-sizing is possible for both dynamic and static volumes. But while dynamic
- * volumes may be re-sized arbitrarily, static volumes cannot be made to be
- * smaller than the number of bytes they bear. To arbitrarily shrink a static
- * volume, it must be wiped out first (by means of volume update operation with
- * zero number of bytes).
- */
-struct ubi_rsvol_req {
- __s64 bytes;
- __s32 vol_id;
-} __packed;
-
-/**
- * struct ubi_rnvol_req - volumes re-name request.
- * @count: count of volumes to re-name
- * @padding1: reserved for future, not used, has to be zeroed
- * @vol_id: ID of the volume to re-name
- * @name_len: name length
- * @padding2: reserved for future, not used, has to be zeroed
- * @name: new volume name
- *
- * UBI allows to re-name up to %32 volumes at one go. The count of volumes to
- * re-name is specified in the @count field. The ID of the volumes to re-name
- * and the new names are specified in the @vol_id and @name fields.
- *
- * The UBI volume re-name operation is atomic, which means that should power cut
- * happen, the volumes will have either old name or new name. So the possible
- * use-cases of this command is atomic upgrade. Indeed, to upgrade, say, volumes
- * A and B one may create temporary volumes %A1 and %B1 with the new contents,
- * then atomically re-name A1->A and B1->B, in which case old %A and %B will
- * be removed.
- *
- * If it is not desirable to remove old A and B, the re-name request has to
- * contain 4 entries: A1->A, A->A1, B1->B, B->B1, in which case old A1 and B1
- * become A and B, and old A and B will become A1 and B1.
- *
- * It is also OK to request: A1->A, A1->X, B1->B, B->Y, in which case old A1
- * and B1 become A and B, and old A and B become X and Y.
- *
- * In other words, in case of re-naming into an existing volume name, the
- * existing volume is removed, unless it is re-named as well at the same
- * re-name request.
- */
-struct ubi_rnvol_req {
- __s32 count;
- __s8 padding1[12];
- struct {
- __s32 vol_id;
- __s16 name_len;
- __s8 padding2[2];
- char name[UBI_MAX_VOLUME_NAME + 1];
- } ents[UBI_MAX_RNVOL];
-} __packed;
-
-/**
- * struct ubi_leb_change_req - a data structure used in atomic LEB change
- * requests.
- * @lnum: logical eraseblock number to change
- * @bytes: how many bytes will be written to the logical eraseblock
- * @dtype: pass "3" for better compatibility with old kernels
- * @padding: reserved for future, not used, has to be zeroed
- *
- * The @dtype field used to inform UBI about what kind of data will be written
- * to the LEB: long term (value 1), short term (value 2), unknown (value 3).
- * UBI tried to pick a PEB with lower erase counter for short term data and a
- * PEB with higher erase counter for long term data. But this was not really
- * used because users usually do not know this and could easily mislead UBI. We
- * removed this feature in May 2012. UBI currently just ignores the @dtype
- * field. But for better compatibility with older kernels it is recommended to
- * set @dtype to 3 (unknown).
- */
-struct ubi_leb_change_req {
- __s32 lnum;
- __s32 bytes;
- __s8 dtype; /* obsolete, do not use! */
- __s8 padding[7];
-} __packed;
-
-/**
- * struct ubi_map_req - a data structure used in map LEB requests.
- * @dtype: pass "3" for better compatibility with old kernels
- * @lnum: logical eraseblock number to unmap
- * @padding: reserved for future, not used, has to be zeroed
- */
-struct ubi_map_req {
- __s32 lnum;
- __s8 dtype; /* obsolete, do not use! */
- __s8 padding[3];
-} __packed;
-
-
-/**
- * struct ubi_set_vol_prop_req - a data structure used to set an UBI volume
- * property.
- * @property: property to set (%UBI_VOL_PROP_DIRECT_WRITE)
- * @padding: reserved for future, not used, has to be zeroed
- * @value: value to set
- */
-struct ubi_set_vol_prop_req {
- __u8 property;
- __u8 padding[7];
- __u64 value;
-} __packed;
-
-#endif /* __UBI_USER_H__ */
# UAPI Header export list
+header-y += inftl-user.h
+header-y += mtd-abi.h
+header-y += mtd-user.h
+header-y += nftl-user.h
+header-y += ubi-user.h
--- /dev/null
+/*
+ * Parts of INFTL headers shared with userspace
+ *
+ */
+
+#ifndef __MTD_INFTL_USER_H__
+#define __MTD_INFTL_USER_H__
+
+#include <linux/types.h>
+
+#define OSAK_VERSION 0x5120
+#define PERCENTUSED 98
+
+#define SECTORSIZE 512
+
+/* Block Control Information */
+
+struct inftl_bci {
+ __u8 ECCsig[6];
+ __u8 Status;
+ __u8 Status1;
+} __attribute__((packed));
+
+struct inftl_unithead1 {
+ __u16 virtualUnitNo;
+ __u16 prevUnitNo;
+ __u8 ANAC;
+ __u8 NACs;
+ __u8 parityPerField;
+ __u8 discarded;
+} __attribute__((packed));
+
+struct inftl_unithead2 {
+ __u8 parityPerField;
+ __u8 ANAC;
+ __u16 prevUnitNo;
+ __u16 virtualUnitNo;
+ __u8 NACs;
+ __u8 discarded;
+} __attribute__((packed));
+
+struct inftl_unittail {
+ __u8 Reserved[4];
+ __u16 EraseMark;
+ __u16 EraseMark1;
+} __attribute__((packed));
+
+union inftl_uci {
+ struct inftl_unithead1 a;
+ struct inftl_unithead2 b;
+ struct inftl_unittail c;
+};
+
+struct inftl_oob {
+ struct inftl_bci b;
+ union inftl_uci u;
+};
+
+
+/* INFTL Media Header */
+
+struct INFTLPartition {
+ __u32 virtualUnits;
+ __u32 firstUnit;
+ __u32 lastUnit;
+ __u32 flags;
+ __u32 spareUnits;
+ __u32 Reserved0;
+ __u32 Reserved1;
+} __attribute__((packed));
+
+struct INFTLMediaHeader {
+ char bootRecordID[8];
+ __u32 NoOfBootImageBlocks;
+ __u32 NoOfBinaryPartitions;
+ __u32 NoOfBDTLPartitions;
+ __u32 BlockMultiplierBits;
+ __u32 FormatFlags;
+ __u32 OsakVersion;
+ __u32 PercentUsed;
+ struct INFTLPartition Partitions[4];
+} __attribute__((packed));
+
+/* Partition flag types */
+#define INFTL_BINARY 0x20000000
+#define INFTL_BDTL 0x40000000
+#define INFTL_LAST 0x80000000
+
+#endif /* __MTD_INFTL_USER_H__ */
+
+
--- /dev/null
+/*
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef __MTD_ABI_H__
+#define __MTD_ABI_H__
+
+#include <linux/types.h>
+
+struct erase_info_user {
+ __u32 start;
+ __u32 length;
+};
+
+struct erase_info_user64 {
+ __u64 start;
+ __u64 length;
+};
+
+struct mtd_oob_buf {
+ __u32 start;
+ __u32 length;
+ unsigned char __user *ptr;
+};
+
+struct mtd_oob_buf64 {
+ __u64 start;
+ __u32 pad;
+ __u32 length;
+ __u64 usr_ptr;
+};
+
+/**
+ * MTD operation modes
+ *
+ * @MTD_OPS_PLACE_OOB: OOB data are placed at the given offset (default)
+ * @MTD_OPS_AUTO_OOB: OOB data are automatically placed at the free areas
+ * which are defined by the internal ecclayout
+ * @MTD_OPS_RAW: data are transferred as-is, with no error correction;
+ * this mode implies %MTD_OPS_PLACE_OOB
+ *
+ * These modes can be passed to ioctl(MEMWRITE) and are also used internally.
+ * See notes on "MTD file modes" for discussion on %MTD_OPS_RAW vs.
+ * %MTD_FILE_MODE_RAW.
+ */
+enum {
+ MTD_OPS_PLACE_OOB = 0,
+ MTD_OPS_AUTO_OOB = 1,
+ MTD_OPS_RAW = 2,
+};
+
+/**
+ * struct mtd_write_req - data structure for requesting a write operation
+ *
+ * @start: start address
+ * @len: length of data buffer
+ * @ooblen: length of OOB buffer
+ * @usr_data: user-provided data buffer
+ * @usr_oob: user-provided OOB buffer
+ * @mode: MTD mode (see "MTD operation modes")
+ * @padding: reserved, must be set to 0
+ *
+ * This structure supports ioctl(MEMWRITE) operations, allowing data and/or OOB
+ * writes in various modes. To write to OOB-only, set @usr_data == NULL, and to
+ * write data-only, set @usr_oob == NULL. However, setting both @usr_data and
+ * @usr_oob to NULL is not allowed.
+ */
+struct mtd_write_req {
+ __u64 start;
+ __u64 len;
+ __u64 ooblen;
+ __u64 usr_data;
+ __u64 usr_oob;
+ __u8 mode;
+ __u8 padding[7];
+};
+
+#define MTD_ABSENT 0
+#define MTD_RAM 1
+#define MTD_ROM 2
+#define MTD_NORFLASH 3
+#define MTD_NANDFLASH 4
+#define MTD_DATAFLASH 6
+#define MTD_UBIVOLUME 7
+#define MTD_MLCNANDFLASH 8
+
+#define MTD_WRITEABLE 0x400 /* Device is writeable */
+#define MTD_BIT_WRITEABLE 0x800 /* Single bits can be flipped */
+#define MTD_NO_ERASE 0x1000 /* No erase necessary */
+#define MTD_POWERUP_LOCK 0x2000 /* Always locked after reset */
+
+/* Some common devices / combinations of capabilities */
+#define MTD_CAP_ROM 0
+#define MTD_CAP_RAM (MTD_WRITEABLE | MTD_BIT_WRITEABLE | MTD_NO_ERASE)
+#define MTD_CAP_NORFLASH (MTD_WRITEABLE | MTD_BIT_WRITEABLE)
+#define MTD_CAP_NANDFLASH (MTD_WRITEABLE)
+
+/* Obsolete ECC byte placement modes (used with obsolete MEMGETOOBSEL) */
+#define MTD_NANDECC_OFF 0 // Switch off ECC (Not recommended)
+#define MTD_NANDECC_PLACE 1 // Use the given placement in the structure (YAFFS1 legacy mode)
+#define MTD_NANDECC_AUTOPLACE 2 // Use the default placement scheme
+#define MTD_NANDECC_PLACEONLY 3 // Use the given placement in the structure (Do not store ecc result on read)
+#define MTD_NANDECC_AUTOPL_USR 4 // Use the given autoplacement scheme rather than using the default
+
+/* OTP mode selection */
+#define MTD_OTP_OFF 0
+#define MTD_OTP_FACTORY 1
+#define MTD_OTP_USER 2
+
+struct mtd_info_user {
+ __u8 type;
+ __u32 flags;
+ __u32 size; /* Total size of the MTD */
+ __u32 erasesize;
+ __u32 writesize;
+ __u32 oobsize; /* Amount of OOB data per block (e.g. 16) */
+ __u64 padding; /* Old obsolete field; do not use */
+};
+
+struct region_info_user {
+ __u32 offset; /* At which this region starts,
+ * from the beginning of the MTD */
+ __u32 erasesize; /* For this region */
+ __u32 numblocks; /* Number of blocks in this region */
+ __u32 regionindex;
+};
+
+struct otp_info {
+ __u32 start;
+ __u32 length;
+ __u32 locked;
+};
+
+/*
+ * Note, the following ioctl existed in the past and was removed:
+ * #define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo)
+ * Try to avoid adding a new ioctl with the same ioctl number.
+ */
+
+/* Get basic MTD characteristics info (better to use sysfs) */
+#define MEMGETINFO _IOR('M', 1, struct mtd_info_user)
+/* Erase segment of MTD */
+#define MEMERASE _IOW('M', 2, struct erase_info_user)
+/* Write out-of-band data from MTD */
+#define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf)
+/* Read out-of-band data from MTD */
+#define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf)
+/* Lock a chip (for MTD that supports it) */
+#define MEMLOCK _IOW('M', 5, struct erase_info_user)
+/* Unlock a chip (for MTD that supports it) */
+#define MEMUNLOCK _IOW('M', 6, struct erase_info_user)
+/* Get the number of different erase regions */
+#define MEMGETREGIONCOUNT _IOR('M', 7, int)
+/* Get information about the erase region for a specific index */
+#define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user)
+/* Get info about OOB modes (e.g., RAW, PLACE, AUTO) - legacy interface */
+#define MEMGETOOBSEL _IOR('M', 10, struct nand_oobinfo)
+/* Check if an eraseblock is bad */
+#define MEMGETBADBLOCK _IOW('M', 11, __kernel_loff_t)
+/* Mark an eraseblock as bad */
+#define MEMSETBADBLOCK _IOW('M', 12, __kernel_loff_t)
+/* Set OTP (One-Time Programmable) mode (factory vs. user) */
+#define OTPSELECT _IOR('M', 13, int)
+/* Get number of OTP (One-Time Programmable) regions */
+#define OTPGETREGIONCOUNT _IOW('M', 14, int)
+/* Get all OTP (One-Time Programmable) info about MTD */
+#define OTPGETREGIONINFO _IOW('M', 15, struct otp_info)
+/* Lock a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */
+#define OTPLOCK _IOR('M', 16, struct otp_info)
+/* Get ECC layout (deprecated) */
+#define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout_user)
+/* Get statistics about corrected/uncorrected errors */
+#define ECCGETSTATS _IOR('M', 18, struct mtd_ecc_stats)
+/* Set MTD mode on a per-file-descriptor basis (see "MTD file modes") */
+#define MTDFILEMODE _IO('M', 19)
+/* Erase segment of MTD (supports 64-bit address) */
+#define MEMERASE64 _IOW('M', 20, struct erase_info_user64)
+/* Write data to OOB (64-bit version) */
+#define MEMWRITEOOB64 _IOWR('M', 21, struct mtd_oob_buf64)
+/* Read data from OOB (64-bit version) */
+#define MEMREADOOB64 _IOWR('M', 22, struct mtd_oob_buf64)
+/* Check if chip is locked (for MTD that supports it) */
+#define MEMISLOCKED _IOR('M', 23, struct erase_info_user)
+/*
+ * Most generic write interface; can write in-band and/or out-of-band in various
+ * modes (see "struct mtd_write_req"). This ioctl is not supported for flashes
+ * without OOB, e.g., NOR flash.
+ */
+#define MEMWRITE _IOWR('M', 24, struct mtd_write_req)
+
+/*
+ * Obsolete legacy interface. Keep it in order not to break userspace
+ * interfaces
+ */
+struct nand_oobinfo {
+ __u32 useecc;
+ __u32 eccbytes;
+ __u32 oobfree[8][2];
+ __u32 eccpos[32];
+};
+
+struct nand_oobfree {
+ __u32 offset;
+ __u32 length;
+};
+
+#define MTD_MAX_OOBFREE_ENTRIES 8
+#define MTD_MAX_ECCPOS_ENTRIES 64
+/*
+ * OBSOLETE: ECC layout control structure. Exported to user-space via ioctl
+ * ECCGETLAYOUT for backwards compatbility and should not be mistaken as a
+ * complete set of ECC information. The ioctl truncates the larger internal
+ * structure to retain binary compatibility with the static declaration of the
+ * ioctl. Note that the "MTD_MAX_..._ENTRIES" macros represent the max size of
+ * the user struct, not the MAX size of the internal struct nand_ecclayout.
+ */
+struct nand_ecclayout_user {
+ __u32 eccbytes;
+ __u32 eccpos[MTD_MAX_ECCPOS_ENTRIES];
+ __u32 oobavail;
+ struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES];
+};
+
+/**
+ * struct mtd_ecc_stats - error correction stats
+ *
+ * @corrected: number of corrected bits
+ * @failed: number of uncorrectable errors
+ * @badblocks: number of bad blocks in this partition
+ * @bbtblocks: number of blocks reserved for bad block tables
+ */
+struct mtd_ecc_stats {
+ __u32 corrected;
+ __u32 failed;
+ __u32 badblocks;
+ __u32 bbtblocks;
+};
+
+/*
+ * MTD file modes - for read/write access to MTD
+ *
+ * @MTD_FILE_MODE_NORMAL: OTP disabled, ECC enabled
+ * @MTD_FILE_MODE_OTP_FACTORY: OTP enabled in factory mode
+ * @MTD_FILE_MODE_OTP_USER: OTP enabled in user mode
+ * @MTD_FILE_MODE_RAW: OTP disabled, ECC disabled
+ *
+ * These modes can be set via ioctl(MTDFILEMODE). The mode mode will be retained
+ * separately for each open file descriptor.
+ *
+ * Note: %MTD_FILE_MODE_RAW provides the same functionality as %MTD_OPS_RAW -
+ * raw access to the flash, without error correction or autoplacement schemes.
+ * Wherever possible, the MTD_OPS_* mode will override the MTD_FILE_MODE_* mode
+ * (e.g., when using ioctl(MEMWRITE)), but in some cases, the MTD_FILE_MODE is
+ * used out of necessity (e.g., `write()', ioctl(MEMWRITEOOB64)).
+ */
+enum mtd_file_modes {
+ MTD_FILE_MODE_NORMAL = MTD_OTP_OFF,
+ MTD_FILE_MODE_OTP_FACTORY = MTD_OTP_FACTORY,
+ MTD_FILE_MODE_OTP_USER = MTD_OTP_USER,
+ MTD_FILE_MODE_RAW,
+};
+
+#endif /* __MTD_ABI_H__ */
--- /dev/null
+/*
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef __MTD_USER_H__
+#define __MTD_USER_H__
+
+#include <stdint.h>
+
+/* This file is blessed for inclusion by userspace */
+#include <mtd/mtd-abi.h>
+
+typedef struct mtd_info_user mtd_info_t;
+typedef struct erase_info_user erase_info_t;
+typedef struct region_info_user region_info_t;
+typedef struct nand_oobinfo nand_oobinfo_t;
+typedef struct nand_ecclayout_user nand_ecclayout_t;
+
+#endif /* __MTD_USER_H__ */
--- /dev/null
+/*
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef __MTD_NFTL_USER_H__
+#define __MTD_NFTL_USER_H__
+
+#include <linux/types.h>
+
+/* Block Control Information */
+
+struct nftl_bci {
+ unsigned char ECCSig[6];
+ __u8 Status;
+ __u8 Status1;
+}__attribute__((packed));
+
+/* Unit Control Information */
+
+struct nftl_uci0 {
+ __u16 VirtUnitNum;
+ __u16 ReplUnitNum;
+ __u16 SpareVirtUnitNum;
+ __u16 SpareReplUnitNum;
+} __attribute__((packed));
+
+struct nftl_uci1 {
+ __u32 WearInfo;
+ __u16 EraseMark;
+ __u16 EraseMark1;
+} __attribute__((packed));
+
+struct nftl_uci2 {
+ __u16 FoldMark;
+ __u16 FoldMark1;
+ __u32 unused;
+} __attribute__((packed));
+
+union nftl_uci {
+ struct nftl_uci0 a;
+ struct nftl_uci1 b;
+ struct nftl_uci2 c;
+};
+
+struct nftl_oob {
+ struct nftl_bci b;
+ union nftl_uci u;
+};
+
+/* NFTL Media Header */
+
+struct NFTLMediaHeader {
+ char DataOrgID[6];
+ __u16 NumEraseUnits;
+ __u16 FirstPhysicalEUN;
+ __u32 FormattedSize;
+ unsigned char UnitSizeFactor;
+} __attribute__((packed));
+
+#define MAX_ERASE_ZONES (8192 - 512)
+
+#define ERASE_MARK 0x3c69
+#define SECTOR_FREE 0xff
+#define SECTOR_USED 0x55
+#define SECTOR_IGNORE 0x11
+#define SECTOR_DELETED 0x00
+
+#define FOLD_MARK_IN_PROGRESS 0x5555
+
+#define ZONE_GOOD 0xff
+#define ZONE_BAD_ORIGINAL 0
+#define ZONE_BAD_MARKED 7
+
+
+#endif /* __MTD_NFTL_USER_H__ */
--- /dev/null
+/*
+ * Copyright © International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий Артём)
+ */
+
+#ifndef __UBI_USER_H__
+#define __UBI_USER_H__
+
+#include <linux/types.h>
+
+/*
+ * UBI device creation (the same as MTD device attachment)
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * MTD devices may be attached using %UBI_IOCATT ioctl command of the UBI
+ * control device. The caller has to properly fill and pass
+ * &struct ubi_attach_req object - UBI will attach the MTD device specified in
+ * the request and return the newly created UBI device number as the ioctl
+ * return value.
+ *
+ * UBI device deletion (the same as MTD device detachment)
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * An UBI device maybe deleted with %UBI_IOCDET ioctl command of the UBI
+ * control device.
+ *
+ * UBI volume creation
+ * ~~~~~~~~~~~~~~~~~~~
+ *
+ * UBI volumes are created via the %UBI_IOCMKVOL ioctl command of UBI character
+ * device. A &struct ubi_mkvol_req object has to be properly filled and a
+ * pointer to it has to be passed to the ioctl.
+ *
+ * UBI volume deletion
+ * ~~~~~~~~~~~~~~~~~~~
+ *
+ * To delete a volume, the %UBI_IOCRMVOL ioctl command of the UBI character
+ * device should be used. A pointer to the 32-bit volume ID hast to be passed
+ * to the ioctl.
+ *
+ * UBI volume re-size
+ * ~~~~~~~~~~~~~~~~~~
+ *
+ * To re-size a volume, the %UBI_IOCRSVOL ioctl command of the UBI character
+ * device should be used. A &struct ubi_rsvol_req object has to be properly
+ * filled and a pointer to it has to be passed to the ioctl.
+ *
+ * UBI volumes re-name
+ * ~~~~~~~~~~~~~~~~~~~
+ *
+ * To re-name several volumes atomically at one go, the %UBI_IOCRNVOL command
+ * of the UBI character device should be used. A &struct ubi_rnvol_req object
+ * has to be properly filled and a pointer to it has to be passed to the ioctl.
+ *
+ * UBI volume update
+ * ~~~~~~~~~~~~~~~~~
+ *
+ * Volume update should be done via the %UBI_IOCVOLUP ioctl command of the
+ * corresponding UBI volume character device. A pointer to a 64-bit update
+ * size should be passed to the ioctl. After this, UBI expects user to write
+ * this number of bytes to the volume character device. The update is finished
+ * when the claimed number of bytes is passed. So, the volume update sequence
+ * is something like:
+ *
+ * fd = open("/dev/my_volume");
+ * ioctl(fd, UBI_IOCVOLUP, &image_size);
+ * write(fd, buf, image_size);
+ * close(fd);
+ *
+ * Logical eraseblock erase
+ * ~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * To erase a logical eraseblock, the %UBI_IOCEBER ioctl command of the
+ * corresponding UBI volume character device should be used. This command
+ * unmaps the requested logical eraseblock, makes sure the corresponding
+ * physical eraseblock is successfully erased, and returns.
+ *
+ * Atomic logical eraseblock change
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * Atomic logical eraseblock change operation is called using the %UBI_IOCEBCH
+ * ioctl command of the corresponding UBI volume character device. A pointer to
+ * a &struct ubi_leb_change_req object has to be passed to the ioctl. Then the
+ * user is expected to write the requested amount of bytes (similarly to what
+ * should be done in case of the "volume update" ioctl).
+ *
+ * Logical eraseblock map
+ * ~~~~~~~~~~~~~~~~~~~~~
+ *
+ * To map a logical eraseblock to a physical eraseblock, the %UBI_IOCEBMAP
+ * ioctl command should be used. A pointer to a &struct ubi_map_req object is
+ * expected to be passed. The ioctl maps the requested logical eraseblock to
+ * a physical eraseblock and returns. Only non-mapped logical eraseblocks can
+ * be mapped. If the logical eraseblock specified in the request is already
+ * mapped to a physical eraseblock, the ioctl fails and returns error.
+ *
+ * Logical eraseblock unmap
+ * ~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * To unmap a logical eraseblock to a physical eraseblock, the %UBI_IOCEBUNMAP
+ * ioctl command should be used. The ioctl unmaps the logical eraseblocks,
+ * schedules corresponding physical eraseblock for erasure, and returns. Unlike
+ * the "LEB erase" command, it does not wait for the physical eraseblock being
+ * erased. Note, the side effect of this is that if an unclean reboot happens
+ * after the unmap ioctl returns, you may find the LEB mapped again to the same
+ * physical eraseblock after the UBI is run again.
+ *
+ * Check if logical eraseblock is mapped
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * To check if a logical eraseblock is mapped to a physical eraseblock, the
+ * %UBI_IOCEBISMAP ioctl command should be used. It returns %0 if the LEB is
+ * not mapped, and %1 if it is mapped.
+ *
+ * Set an UBI volume property
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * To set an UBI volume property the %UBI_IOCSETPROP ioctl command should be
+ * used. A pointer to a &struct ubi_set_vol_prop_req object is expected to be
+ * passed. The object describes which property should be set, and to which value
+ * it should be set.
+ */
+
+/*
+ * When a new UBI volume or UBI device is created, users may either specify the
+ * volume/device number they want to create or to let UBI automatically assign
+ * the number using these constants.
+ */
+#define UBI_VOL_NUM_AUTO (-1)
+#define UBI_DEV_NUM_AUTO (-1)
+
+/* Maximum volume name length */
+#define UBI_MAX_VOLUME_NAME 127
+
+/* ioctl commands of UBI character devices */
+
+#define UBI_IOC_MAGIC 'o'
+
+/* Create an UBI volume */
+#define UBI_IOCMKVOL _IOW(UBI_IOC_MAGIC, 0, struct ubi_mkvol_req)
+/* Remove an UBI volume */
+#define UBI_IOCRMVOL _IOW(UBI_IOC_MAGIC, 1, __s32)
+/* Re-size an UBI volume */
+#define UBI_IOCRSVOL _IOW(UBI_IOC_MAGIC, 2, struct ubi_rsvol_req)
+/* Re-name volumes */
+#define UBI_IOCRNVOL _IOW(UBI_IOC_MAGIC, 3, struct ubi_rnvol_req)
+
+/* ioctl commands of the UBI control character device */
+
+#define UBI_CTRL_IOC_MAGIC 'o'
+
+/* Attach an MTD device */
+#define UBI_IOCATT _IOW(UBI_CTRL_IOC_MAGIC, 64, struct ubi_attach_req)
+/* Detach an MTD device */
+#define UBI_IOCDET _IOW(UBI_CTRL_IOC_MAGIC, 65, __s32)
+
+/* ioctl commands of UBI volume character devices */
+
+#define UBI_VOL_IOC_MAGIC 'O'
+
+/* Start UBI volume update */
+#define UBI_IOCVOLUP _IOW(UBI_VOL_IOC_MAGIC, 0, __s64)
+/* LEB erasure command, used for debugging, disabled by default */
+#define UBI_IOCEBER _IOW(UBI_VOL_IOC_MAGIC, 1, __s32)
+/* Atomic LEB change command */
+#define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, __s32)
+/* Map LEB command */
+#define UBI_IOCEBMAP _IOW(UBI_VOL_IOC_MAGIC, 3, struct ubi_map_req)
+/* Unmap LEB command */
+#define UBI_IOCEBUNMAP _IOW(UBI_VOL_IOC_MAGIC, 4, __s32)
+/* Check if LEB is mapped command */
+#define UBI_IOCEBISMAP _IOR(UBI_VOL_IOC_MAGIC, 5, __s32)
+/* Set an UBI volume property */
+#define UBI_IOCSETVOLPROP _IOW(UBI_VOL_IOC_MAGIC, 6, \
+ struct ubi_set_vol_prop_req)
+
+/* Maximum MTD device name length supported by UBI */
+#define MAX_UBI_MTD_NAME_LEN 127
+
+/* Maximum amount of UBI volumes that can be re-named at one go */
+#define UBI_MAX_RNVOL 32
+
+/*
+ * UBI volume type constants.
+ *
+ * @UBI_DYNAMIC_VOLUME: dynamic volume
+ * @UBI_STATIC_VOLUME: static volume
+ */
+enum {
+ UBI_DYNAMIC_VOLUME = 3,
+ UBI_STATIC_VOLUME = 4,
+};
+
+/*
+ * UBI set volume property ioctl constants.
+ *
+ * @UBI_VOL_PROP_DIRECT_WRITE: allow (any non-zero value) or disallow (value 0)
+ * user to directly write and erase individual
+ * eraseblocks on dynamic volumes
+ */
+enum {
+ UBI_VOL_PROP_DIRECT_WRITE = 1,
+};
+
+/**
+ * struct ubi_attach_req - attach MTD device request.
+ * @ubi_num: UBI device number to create
+ * @mtd_num: MTD device number to attach
+ * @vid_hdr_offset: VID header offset (use defaults if %0)
+ * @max_beb_per1024: maximum expected number of bad PEB per 1024 PEBs
+ * @padding: reserved for future, not used, has to be zeroed
+ *
+ * This data structure is used to specify MTD device UBI has to attach and the
+ * parameters it has to use. The number which should be assigned to the new UBI
+ * device is passed in @ubi_num. UBI may automatically assign the number if
+ * @UBI_DEV_NUM_AUTO is passed. In this case, the device number is returned in
+ * @ubi_num.
+ *
+ * Most applications should pass %0 in @vid_hdr_offset to make UBI use default
+ * offset of the VID header within physical eraseblocks. The default offset is
+ * the next min. I/O unit after the EC header. For example, it will be offset
+ * 512 in case of a 512 bytes page NAND flash with no sub-page support. Or
+ * it will be 512 in case of a 2KiB page NAND flash with 4 512-byte sub-pages.
+ *
+ * But in rare cases, if this optimizes things, the VID header may be placed to
+ * a different offset. For example, the boot-loader might do things faster if
+ * the VID header sits at the end of the first 2KiB NAND page with 4 sub-pages.
+ * As the boot-loader would not normally need to read EC headers (unless it
+ * needs UBI in RW mode), it might be faster to calculate ECC. This is weird
+ * example, but it real-life example. So, in this example, @vid_hdr_offer would
+ * be 2KiB-64 bytes = 1984. Note, that this position is not even 512-bytes
+ * aligned, which is OK, as UBI is clever enough to realize this is 4th
+ * sub-page of the first page and add needed padding.
+ *
+ * The @max_beb_per1024 is the maximum amount of bad PEBs UBI expects on the
+ * UBI device per 1024 eraseblocks. This value is often given in an other form
+ * in the NAND datasheet (min NVB i.e. minimal number of valid blocks). The
+ * maximum expected bad eraseblocks per 1024 is then:
+ * 1024 * (1 - MinNVB / MaxNVB)
+ * Which gives 20 for most NAND devices. This limit is used in order to derive
+ * amount of eraseblock UBI reserves for handling new bad blocks. If the device
+ * has more bad eraseblocks than this limit, UBI does not reserve any physical
+ * eraseblocks for new bad eraseblocks, but attempts to use available
+ * eraseblocks (if any). The accepted range is 0-768. If 0 is given, the
+ * default kernel value of %CONFIG_MTD_UBI_BEB_LIMIT will be used.
+ */
+struct ubi_attach_req {
+ __s32 ubi_num;
+ __s32 mtd_num;
+ __s32 vid_hdr_offset;
+ __s16 max_beb_per1024;
+ __s8 padding[10];
+};
+
+/**
+ * struct ubi_mkvol_req - volume description data structure used in
+ * volume creation requests.
+ * @vol_id: volume number
+ * @alignment: volume alignment
+ * @bytes: volume size in bytes
+ * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
+ * @padding1: reserved for future, not used, has to be zeroed
+ * @name_len: volume name length
+ * @padding2: reserved for future, not used, has to be zeroed
+ * @name: volume name
+ *
+ * This structure is used by user-space programs when creating new volumes. The
+ * @used_bytes field is only necessary when creating static volumes.
+ *
+ * The @alignment field specifies the required alignment of the volume logical
+ * eraseblock. This means, that the size of logical eraseblocks will be aligned
+ * to this number, i.e.,
+ * (UBI device logical eraseblock size) mod (@alignment) = 0.
+ *
+ * To put it differently, the logical eraseblock of this volume may be slightly
+ * shortened in order to make it properly aligned. The alignment has to be
+ * multiple of the flash minimal input/output unit, or %1 to utilize the entire
+ * available space of logical eraseblocks.
+ *
+ * The @alignment field may be useful, for example, when one wants to maintain
+ * a block device on top of an UBI volume. In this case, it is desirable to fit
+ * an integer number of blocks in logical eraseblocks of this UBI volume. With
+ * alignment it is possible to update this volume using plane UBI volume image
+ * BLOBs, without caring about how to properly align them.
+ */
+struct ubi_mkvol_req {
+ __s32 vol_id;
+ __s32 alignment;
+ __s64 bytes;
+ __s8 vol_type;
+ __s8 padding1;
+ __s16 name_len;
+ __s8 padding2[4];
+ char name[UBI_MAX_VOLUME_NAME + 1];
+} __packed;
+
+/**
+ * struct ubi_rsvol_req - a data structure used in volume re-size requests.
+ * @vol_id: ID of the volume to re-size
+ * @bytes: new size of the volume in bytes
+ *
+ * Re-sizing is possible for both dynamic and static volumes. But while dynamic
+ * volumes may be re-sized arbitrarily, static volumes cannot be made to be
+ * smaller than the number of bytes they bear. To arbitrarily shrink a static
+ * volume, it must be wiped out first (by means of volume update operation with
+ * zero number of bytes).
+ */
+struct ubi_rsvol_req {
+ __s64 bytes;
+ __s32 vol_id;
+} __packed;
+
+/**
+ * struct ubi_rnvol_req - volumes re-name request.
+ * @count: count of volumes to re-name
+ * @padding1: reserved for future, not used, has to be zeroed
+ * @vol_id: ID of the volume to re-name
+ * @name_len: name length
+ * @padding2: reserved for future, not used, has to be zeroed
+ * @name: new volume name
+ *
+ * UBI allows to re-name up to %32 volumes at one go. The count of volumes to
+ * re-name is specified in the @count field. The ID of the volumes to re-name
+ * and the new names are specified in the @vol_id and @name fields.
+ *
+ * The UBI volume re-name operation is atomic, which means that should power cut
+ * happen, the volumes will have either old name or new name. So the possible
+ * use-cases of this command is atomic upgrade. Indeed, to upgrade, say, volumes
+ * A and B one may create temporary volumes %A1 and %B1 with the new contents,
+ * then atomically re-name A1->A and B1->B, in which case old %A and %B will
+ * be removed.
+ *
+ * If it is not desirable to remove old A and B, the re-name request has to
+ * contain 4 entries: A1->A, A->A1, B1->B, B->B1, in which case old A1 and B1
+ * become A and B, and old A and B will become A1 and B1.
+ *
+ * It is also OK to request: A1->A, A1->X, B1->B, B->Y, in which case old A1
+ * and B1 become A and B, and old A and B become X and Y.
+ *
+ * In other words, in case of re-naming into an existing volume name, the
+ * existing volume is removed, unless it is re-named as well at the same
+ * re-name request.
+ */
+struct ubi_rnvol_req {
+ __s32 count;
+ __s8 padding1[12];
+ struct {
+ __s32 vol_id;
+ __s16 name_len;
+ __s8 padding2[2];
+ char name[UBI_MAX_VOLUME_NAME + 1];
+ } ents[UBI_MAX_RNVOL];
+} __packed;
+
+/**
+ * struct ubi_leb_change_req - a data structure used in atomic LEB change
+ * requests.
+ * @lnum: logical eraseblock number to change
+ * @bytes: how many bytes will be written to the logical eraseblock
+ * @dtype: pass "3" for better compatibility with old kernels
+ * @padding: reserved for future, not used, has to be zeroed
+ *
+ * The @dtype field used to inform UBI about what kind of data will be written
+ * to the LEB: long term (value 1), short term (value 2), unknown (value 3).
+ * UBI tried to pick a PEB with lower erase counter for short term data and a
+ * PEB with higher erase counter for long term data. But this was not really
+ * used because users usually do not know this and could easily mislead UBI. We
+ * removed this feature in May 2012. UBI currently just ignores the @dtype
+ * field. But for better compatibility with older kernels it is recommended to
+ * set @dtype to 3 (unknown).
+ */
+struct ubi_leb_change_req {
+ __s32 lnum;
+ __s32 bytes;
+ __s8 dtype; /* obsolete, do not use! */
+ __s8 padding[7];
+} __packed;
+
+/**
+ * struct ubi_map_req - a data structure used in map LEB requests.
+ * @dtype: pass "3" for better compatibility with old kernels
+ * @lnum: logical eraseblock number to unmap
+ * @padding: reserved for future, not used, has to be zeroed
+ */
+struct ubi_map_req {
+ __s32 lnum;
+ __s8 dtype; /* obsolete, do not use! */
+ __s8 padding[3];
+} __packed;
+
+
+/**
+ * struct ubi_set_vol_prop_req - a data structure used to set an UBI volume
+ * property.
+ * @property: property to set (%UBI_VOL_PROP_DIRECT_WRITE)
+ * @padding: reserved for future, not used, has to be zeroed
+ * @value: value to set
+ */
+struct ubi_set_vol_prop_req {
+ __u8 property;
+ __u8 padding[7];
+ __u64 value;
+} __packed;
+
+#endif /* __UBI_USER_H__ */
projects / firefly-linux-kernel-4.4.55.git / commitdiff