--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32.27
+# Fri Oct 28 10:41:46 2011
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_HAVE_SCHED_CLOCK=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+CONFIG_KERNEL_LZO=y
+# CONFIG_SWAP is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+# CONFIG_CGROUP_NS is not set
+CONFIG_CGROUP_FREEZER=y
+# CONFIG_CGROUP_DEVICE is not set
+# CONFIG_CPUSETS is not set
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+# CONFIG_CGROUP_MEM_RES_CTLR is not set
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_PANIC_TIMEOUT=5
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_ASHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_ARCH_RK29=y
+# CONFIG_MACH_RK29SDK is not set
+# CONFIG_MACH_RK29SDK_DDR3 is not set
+# CONFIG_MACH_RK29WINACCORD is not set
+# CONFIG_MACH_RK29FIH is not set
+# CONFIG_MACH_RK29_MALATA is not set
+# CONFIG_MACH_RK29_PHONESDK is not set
+# CONFIG_MACH_RK29_A22 is not set
+# CONFIG_MACH_RK29_TD8801 is not set
+CONFIG_MACH_RK29_TD8801_V2=y
+# CONFIG_MACH_RK29_PHONEPADSDK is not set
+# CONFIG_MACH_RK29_newton is not set
+# CONFIG_DDR_TYPE_DDRII is not set
+CONFIG_DDR_TYPE_LPDDR=y
+# CONFIG_DDR_TYPE_DDR3_800D is not set
+# CONFIG_DDR_TYPE_DDR3_800E is not set
+# CONFIG_DDR_TYPE_DDR3_1066E is not set
+# CONFIG_DDR_TYPE_DDR3_1066F is not set
+# CONFIG_DDR_TYPE_DDR3_1066G is not set
+# CONFIG_DDR_TYPE_DDR3_1333F is not set
+# CONFIG_DDR_TYPE_DDR3_1333G is not set
+# CONFIG_DDR_TYPE_DDR3_1333H is not set
+# CONFIG_DDR_TYPE_DDR3_1333J is not set
+# CONFIG_DDR_TYPE_DDR3_1600G is not set
+# CONFIG_DDR_TYPE_DDR3_1600H is not set
+# CONFIG_DDR_TYPE_DDR3_1600J is not set
+# CONFIG_DDR_TYPE_DDR3_1600K is not set
+# CONFIG_DDR_TYPE_DDR3_1866J is not set
+# CONFIG_DDR_TYPE_DDR3_1866K is not set
+# CONFIG_DDR_TYPE_DDR3_1866L is not set
+# CONFIG_DDR_TYPE_DDR3_1866M is not set
+# CONFIG_DDR_TYPE_DDR3_2133K is not set
+# CONFIG_DDR_TYPE_DDR3_2133L is not set
+# CONFIG_DDR_TYPE_DDR3_2133M is not set
+# CONFIG_DDR_TYPE_DDR3_2133N is not set
+# CONFIG_DDR_TYPE_DDR3_DEFAULT is not set
+CONFIG_RK29_MEM_SIZE_M=512
+CONFIG_DDR_SDRAM_FREQ=192
+# CONFIG_DDR_RECONFIG is not set
+CONFIG_WIFI_CONTROL_FUNC=y
+
+#
+# RK29 VPU (Video Processing Unit) support
+#
+CONFIG_RK29_VPU=y
+CONFIG_RK29_VPU_SERVICE=y
+# CONFIG_RK29_VPU_DEBUG is not set
+CONFIG_RK29_JTAG=y
+CONFIG_RK29_LAST_LOG=y
+
+#
+# support for RK29 power manage
+#
+# CONFIG_RK29_WORKING_POWER_MANAGEMENT is not set
+CONFIG_RK29_CLK_SWITCH_TO_32K=y
+CONFIG_RK29_GPIO_SUSPEND=y
+# CONFIG_RK29_SPI_INSRAM is not set
+CONFIG_RK29_I2C_INSRAM=y
+# CONFIG_RK29_CHARGE_EARLYSUSPEND is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_GIC=y
+CONFIG_PL330=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HIGHMEM=y
+# CONFIG_HIGHPTE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HAS_WAKELOCK=y
+CONFIG_HAS_EARLYSUSPEND=y
+CONFIG_WAKELOCK=y
+CONFIG_WAKELOCK_STAT=y
+CONFIG_USER_WAKELOCK=y
+CONFIG_EARLYSUSPEND=y
+# CONFIG_NO_USER_SPACE_SCREEN_ACCESS_CONTROL is not set
+# CONFIG_CONSOLE_EARLYSUSPEND is not set
+CONFIG_FB_EARLYSUSPEND=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+CONFIG_ANDROID_PARANOID_NETWORK=y
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+# CONFIG_BT_BNEP is not set
+# CONFIG_BT_HIDP is not set
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+CONFIG_BT_HCIBCM4325=y
+CONFIG_IDBLOCK=y
+# CONFIG_WIFI_MAC is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+
+#
+# Some wireless drivers require a rate control algorithm
+#
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=y
+# CONFIG_RFKILL_PM is not set
+# CONFIG_RFKILL_INPUT is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_RKNAND=y
+CONFIG_MTD_NAND_RK29XX=y
+CONFIG_MTD_RKNAND_BUFFER=y
+# CONFIG_MTD_EMMC_CLK_POWER_SAVE is not set
+# CONFIG_MTD_NAND_RK29XX_DEBUG is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ANDROID_PMEM=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_KERNEL_DEBUGGER_CORE is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_UID_STAT is not set
+# CONFIG_WL127X_RFKILL is not set
+CONFIG_APANIC=y
+CONFIG_APANIC_PLABEL="kpanic"
+# CONFIG_STE is not set
+# CONFIG_MTK23D is not set
+CONFIG_TDSC8800=y
+# CONFIG_FM580X is not set
+# CONFIG_MU509 is not set
+# CONFIG_RK29_NEWTON is not set
+CONFIG_RK29_SC8800=y
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_RK29_SUPPORT_MODEM is not set
+CONFIG_RK29_GPS=y
+CONFIG_GPS_GNS7560=y
+
+#
+# Motion Sensors Support
+#
+# CONFIG_MPU_NONE is not set
+# CONFIG_MPU_SENSORS_MPU3050 is not set
+# CONFIG_MPU_SENSORS_MPU6000 is not set
+# CONFIG_MPU_SENSORS_TIMERIRQ is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=y
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_RK29_VMAC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+CONFIG_WLAN_80211=y
+# CONFIG_WIFI_NONE is not set
+CONFIG_BCM4329=y
+# CONFIG_MV8686 is not set
+# CONFIG_BCM4319 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_HSO is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+CONFIG_PPP_SYNC_TTY=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_PPPOLAC is not set
+# CONFIG_PPPOPNS is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_KEYRESET=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYS_RK29=y
+# CONFIG_SYNAPTICS_SO340010 is not set
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_WM831X_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_XPT2046_SPI is not set
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_ILI2102_IIC is not set
+# CONFIG_TOUCHSCREEN_IT7250 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_HANNSTAR_P1003 is not set
+# CONFIG_ATMEL_MXT224 is not set
+# CONFIG_SINTEK_3FA16 is not set
+# CONFIG_EETI_EGALAX is not set
+# CONFIG_TOUCHSCREEN_IT7260 is not set
+# CONFIG_TOUCHSCREEN_NAS is not set
+# CONFIG_LAIBAO_TS is not set
+# CONFIG_TOUCHSCREEN_GT801_IIC is not set
+# CONFIG_TOUCHSCREEN_GT818_IIC is not set
+CONFIG_TOUCHSCREEN_PIXCIR=y
+# CONFIG_TOUCHSCREEN_FT5X0X is not set
+# CONFIG_D70_L3188A is not set
+# CONFIG_TOUCHSCREEN_GT819 is not set
+# CONFIG_TOUCHSCREEN_FT5406 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_LPSENSOR_ISL29028 is not set
+# CONFIG_INPUT_LPSENSOR_CM3602 is not set
+# CONFIG_INPUT_LPSENSOR_AL3006 is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYCHORD is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_GPIO is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+CONFIG_INPUT_WM831X_ON=y
+CONFIG_MAG_SENSORS=y
+CONFIG_COMPASS_AK8975=y
+# CONFIG_COMPASS_AK8973 is not set
+# CONFIG_COMPASS_MMC328X is not set
+CONFIG_G_SENSOR_DEVICE=y
+# CONFIG_GS_MMA7660 is not set
+# CONFIG_GS_MMA8452 is not set
+CONFIG_GS_BMA023=y
+# CONFIG_GS_L3G4200D is not set
+# CONFIG_INPUT_JOGBALL is not set
+# CONFIG_LIGHT_SENSOR_DEVICE is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVMEM=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_RK29=y
+CONFIG_SERIAL_RK29_STANDARD=y
+CONFIG_UART0_RK29=y
+CONFIG_UART0_CTS_RTS_RK29=y
+# CONFIG_UART0_DMA_RK29 is not set
+CONFIG_UART1_RK29=y
+CONFIG_UART2_RK29=y
+CONFIG_UART2_CTS_RTS_RK29=y
+# CONFIG_UART2_DMA_RK29 is not set
+CONFIG_UART3_RK29=y
+# CONFIG_UART3_CTS_RTS_RK29 is not set
+# CONFIG_UART3_DMA_RK29 is not set
+CONFIG_SERIAL_RK29_CONSOLE=y
+# CONFIG_SERIAL_SC8800 is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_DCC_TTY is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_RK29=y
+
+#
+# Now, there are four I2C interfaces selected by developer.
+#
+CONFIG_I2C0_RK29=y
+CONFIG_RK29_I2C0_CONTROLLER=y
+# CONFIG_RK29_I2C0_GPIO is not set
+CONFIG_I2C1_RK29=y
+CONFIG_RK29_I2C1_CONTROLLER=y
+# CONFIG_RK29_I2C1_GPIO is not set
+CONFIG_I2C2_RK29=y
+CONFIG_RK29_I2C2_CONTROLLER=y
+# CONFIG_RK29_I2C2_GPIO is not set
+CONFIG_I2C3_RK29=y
+CONFIG_RK29_I2C3_CONTROLLER=y
+# CONFIG_RK29_I2C3_GPIO is not set
+# CONFIG_I2C_DEV_RK29 is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_PCA963X is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPIM_RK29=y
+CONFIG_SPIM0_RK29=y
+CONFIG_SPIM1_RK29=y
+CONFIG_LCD_USE_SPIM_CONTROL=y
+# CONFIG_LCD_USE_SPI0 is not set
+CONFIG_LCD_USE_SPI1=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ADC=y
+# CONFIG_ADC_RK28 is not set
+CONFIG_ADC_RK29=y
+
+#
+# Headset device support
+#
+CONFIG_RK_HEADSET_DET=y
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_WM831X=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_PCA9554 is not set
+# CONFIG_IOEXTEND_TCA6424 is not set
+CONFIG_EXPANDED_GPIO_NUM=0
+CONFIG_EXPANDED_GPIO_IRQ_NUM=0
+# CONFIG_EXPAND_GPIO_SOFT_INTERRUPT is not set
+CONFIG_SPI_FPGA_GPIO_NUM=96
+CONFIG_SPI_FPGA_GPIO_IRQ_NUM=16
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+CONFIG_WM831X_BACKUP=y
+CONFIG_WM831X_POWER=y
+CONFIG_WM831X_CHARGER_DISPLAY=y
+# CONFIG_WM831X_WITH_BATTERY is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_BATTERY_STC3100 is not set
+# CONFIG_BATTERY_BQ27510 is not set
+# CONFIG_BATTERY_BQ27541 is not set
+# CONFIG_BATTERY_BQ3060 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_TPS65910_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+CONFIG_MFD_WM831X=y
+CONFIG_MFD_WM831X_I2C=y
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM831X_SPI_A22 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_WM831X=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_RK2818_REGULATOR_CHARGE is not set
+# CONFIG_RK2818_REGULATOR_LP8725 is not set
+# CONFIG_RK29_PWM_REGULATOR is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+# CONFIG_VIDEO_RK29XX_VOUT is not set
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+# CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9M112 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9T111 is not set
+# CONFIG_SOC_CAMERA_MT9P111 is not set
+# CONFIG_SOC_CAMERA_MT9D112 is not set
+# CONFIG_SOC_CAMERA_MT9D113 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+# CONFIG_SOC_CAMERA_OV7675 is not set
+# CONFIG_SOC_CAMERA_OV2655 is not set
+# CONFIG_SOC_CAMERA_OV2659 is not set
+# CONFIG_SOC_CAMERA_OV9650 is not set
+# CONFIG_SOC_CAMERA_OV2640 is not set
+# CONFIG_SOC_CAMERA_OV3640 is not set
+# CONFIG_SOC_CAMERA_OV5642 is not set
+CONFIG_SOC_CAMERA_OV5640=y
+CONFIG_OV5640_AUTOFOCUS=y
+# CONFIG_OV5640_FIXEDFOCUS is not set
+# CONFIG_SOC_CAMERA_S5K6AA is not set
+# CONFIG_SOC_CAMERA_GT2005 is not set
+# CONFIG_SOC_CAMERA_GC0307 is not set
+# CONFIG_SOC_CAMERA_GC0308 is not set
+CONFIG_SOC_CAMERA_GC0309=y
+# CONFIG_SOC_CAMERA_GC2015 is not set
+# CONFIG_SOC_CAMERA_HI253 is not set
+# CONFIG_SOC_CAMERA_HI704 is not set
+# CONFIG_SOC_CAMERA_SIV120B is not set
+# CONFIG_SOC_CAMERA_SID130B is not set
+# CONFIG_SOC_CAMERA_NT99250 is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+CONFIG_VIDEO_RK29=y
+CONFIG_VIDEO_RK29_WORK_ONEFRAME=y
+# CONFIG_VIDEO_RK29_WORK_PINGPONG is not set
+CONFIG_VIDEO_RK29_WORK_IPP=y
+# CONFIG_VIDEO_RK29_WORK_NOT_IPP is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GL860 is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_RADIO_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+CONFIG_SMS_SIANO_MDTV=m
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_RK2818 is not set
+CONFIG_FB_RK29=y
+CONFIG_FB_WORK_IPP=y
+# CONFIG_FB_SCALING_OSD is not set
+CONFIG_FB_ROTATE_VIDEO=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_WM831X=y
+# CONFIG_BACKLIGHT_RK29_BL is not set
+# CONFIG_FIH_TOUCHKEY_LED is not set
+# CONFIG_BACKLIGHT_AW9364 is not set
+CONFIG_BUTTON_LIGHT=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+# CONFIG_LCD_NULL is not set
+# CONFIG_LCD_TD043MGEA1 is not set
+# CONFIG_LCD_HX8357 is not set
+# CONFIG_LCD_TJ048NC01CA is not set
+# CONFIG_LCD_HL070VM4AU is not set
+# CONFIG_LCD_HSD070IDW1 is not set
+# CONFIG_LCD_RGB_TFT480800_25_E is not set
+# CONFIG_LCD_HSD100PXN is not set
+# CONFIG_LCD_HSD07PFW1 is not set
+# CONFIG_LCD_BYD8688FTGF is not set
+# CONFIG_LCD_B101AW06 is not set
+# CONFIG_LCD_LS035Y8DX02A is not set
+CONFIG_LCD_LS035Y8DX04A=y
+# CONFIG_LCD_CPTCLAA038LA31XE is not set
+# CONFIG_LCD_A060SE02 is not set
+# CONFIG_LCD_S1D13521 is not set
+# CONFIG_LCD_NT35582 is not set
+# CONFIG_LCD_NT35580 is not set
+# CONFIG_LCD_IPS1P5680_V1_E is not set
+# CONFIG_LCD_MCU_TFT480800_25_E is not set
+# CONFIG_LCD_NT35510 is not set
+# CONFIG_LCD_ILI9803_CPT4_3 is not set
+# CONFIG_DEFAULT_OUT_HDMI is not set
+# CONFIG_LCD_AT070TNA2 is not set
+# CONFIG_LCD_AT070TN93 is not set
+
+#
+# HDMI
+#
+# CONFIG_HDMI is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_LOGO_CHARGER_CLUT224=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_RK29_SOC=y
+CONFIG_SND_RK29_SOC_I2S=y
+# CONFIG_SND_RK29_SOC_I2S_2CH is not set
+CONFIG_SND_RK29_SOC_I2S_8CH=y
+# CONFIG_SND_I2S_DMA_EVENT_DYNAMIC is not set
+CONFIG_SND_I2S_DMA_EVENT_STATIC=y
+# CONFIG_SND_RK29_SOC_WM8988 is not set
+# CONFIG_SND_RK29_SOC_WM8900 is not set
+# CONFIG_SND_RK29_SOC_alc5621 is not set
+# CONFIG_SND_RK29_SOC_alc5631 is not set
+# CONFIG_SND_RK29_SOC_RT5625 is not set
+CONFIG_SND_RK29_SOC_WM8994=y
+# CONFIG_SND_RK29_SOC_CS42L52 is not set
+# CONFIG_SND_RK29_CODEC_SOC_MASTER is not set
+CONFIG_SND_RK29_CODEC_SOC_SLAVE=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_WM8994=y
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=y
+# CONFIG_USB_SERIAL_CONSOLE is not set
+# CONFIG_USB_EZUSB is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+CONFIG_USB_SERIAL_OPTION=y
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+CONFIG_USB_GADGET_DWC_OTG=y
+CONFIG_USB_DWC_OTG=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_ANDROID=y
+# CONFIG_USB_ANDROID_ACM is not set
+CONFIG_USB_ANDROID_ADB=y
+CONFIG_USB_ANDROID_MASS_STORAGE=y
+# CONFIG_USB_ANDROID_RNDIS is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_USB11_HOST is not set
+# CONFIG_USB20_HOST is not set
+CONFIG_USB20_OTG=y
+# CONFIG_DWC_OTG_HOST_ONLY is not set
+CONFIG_DWC_OTG_DEVICE_ONLY=y
+# CONFIG_DWC_OTG_BOTH_HOST_SLAVE is not set
+CONFIG_DWC_CONN_EN=y
+# CONFIG_DWC_OTG_DEBUG is not set
+# CONFIG_DWC_REMOTE_WAKEUP is not set
+CONFIG_DWC_OTG=y
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+CONFIG_MMC_EMBEDDED_SDIO=y
+CONFIG_MMC_PARANOID_SD_INIT=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_MMC_BLOCK_DEFERRED_RESUME is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_SDMMC_RK29=y
+
+#
+# Now, there are two SDMMC controllers selected, SDMMC0 and SDMMC1.
+#
+CONFIG_SDMMC_RK29_OLD=y
+CONFIG_SDMMC0_RK29=y
+CONFIG_SDMMC1_RK29=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_SWITCH=y
+CONFIG_SWITCH_GPIO=y
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+CONFIG_RTC_INTF_ALARM=y
+CONFIG_RTC_INTF_ALARM_DEV=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_HYM8563 is not set
+# CONFIG_RTC_M41T66 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_S35392A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+CONFIG_RTC_DRV_WM831X=y
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+# CONFIG_USB_IP_COMMON is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+# CONFIG_ASUS_OLED is not set
+# CONFIG_TRANZPORT is not set
+
+#
+# Android
+#
+CONFIG_ANDROID=y
+CONFIG_ANDROID_BINDER_IPC=y
+CONFIG_ANDROID_LOGGER=y
+CONFIG_ANDROID_RAM_CONSOLE=y
+CONFIG_ANDROID_RAM_CONSOLE_ENABLE_VERBOSE=y
+CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION=y
+CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_DATA_SIZE=128
+CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_ECC_SIZE=16
+CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_SYMBOL_SIZE=8
+CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_POLYNOMIAL=0x11d
+# CONFIG_ANDROID_RAM_CONSOLE_EARLY_INIT is not set
+CONFIG_ANDROID_TIMED_OUTPUT=y
+CONFIG_ANDROID_TIMED_GPIO=y
+CONFIG_ANDROID_LOW_MEMORY_KILLER=y
+# CONFIG_DST is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_PLAN9AUTH is not set
+# CONFIG_LINE6_USB is not set
+# CONFIG_USB_SERIAL_QUATECH2 is not set
+# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
+# CONFIG_VT6656 is not set
+# CONFIG_FB_UDL is not set
+
+#
+# RAR Register Driver
+#
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_IIO is not set
+
+#
+# GPU Vivante
+#
+CONFIG_VIVANTE=y
+
+#
+# IPP
+#
+CONFIG_RK29_IPP=y
+# CONFIG_DEINTERLACE is not set
+
+#
+# CMMB
+#
+CONFIG_CMMB=y
+CONFIG_SMS_HOSTLIB_SUBSYS=y
+CONFIG_SMS_SPI_ROCKCHIP=y
+# CONFIG_TEST_CODE is not set
+# CONFIG_RK29_SMC is not set
+
+#
+# CIR support
+#
+# CONFIG_RK_CIR is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+# CONFIG_EXT4_FS_XATTR is not set
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+CONFIG_JBD2=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+CONFIG_NLS_CODEPAGE_936=y
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_REED_SOLOMON=y
+CONFIG_REED_SOLOMON_ENC8=y
+CONFIG_REED_SOLOMON_DEC8=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
--- /dev/null
+/* arch/arm/mach-rk29/board-rk29-phonesdk.c
+ *
+ * Copyright (C) 2010 ROCKCHIP, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/skbuff.h>
+#include <linux/spi/spi.h>
+#include <linux/mmc/host.h>
+#include <linux/android_pmem.h>
+#include <linux/usb/android_composite.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+#include <asm/hardware/gic.h>
+
+#include <mach/iomux.h>
+#include <mach/gpio.h>
+#include <mach/irqs.h>
+#include <mach/rk29_iomap.h>
+#include <mach/board.h>
+#include <mach/rk29_nand.h>
+#include <mach/rk29_camera.h> /* ddl@rock-chips.com : camera support */
+#include <media/soc_camera.h> /* ddl@rock-chips.com : camera support */
+#include <mach/vpu_mem.h>
+#include <mach/sram.h>
+#include <mach/ddr.h>
+#include <mach/cpufreq.h>
+
+#include <linux/regulator/rk29-pwm-regulator.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/gpio.h>
+#include <linux/mfd/wm8994/pdata.h>
+#include <linux/mfd/wm8994/registers.h>
+
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/i2c-gpio.h>
+#include <linux/mpu.h>
+#include "devices.h"
+
+
+#if defined(CONFIG_TDSC8800)
+#include <linux/mtk23d.h>
+#endif
+
+#ifdef CONFIG_USE_GPIO_GENERATE_WAVE
+#include "../../../drivers/testcode/gpio_wave.h"
+#endif
+
+#include "../../../drivers/headset_observe/rk_headset.h"
+#include "../../../drivers/staging/android/timed_gpio.h"
+/*set touchscreen different type header*/
+#if defined(CONFIG_TOUCHSCREEN_XPT2046_NORMAL_SPI)
+#include "../../../drivers/input/touchscreen/xpt2046_ts.h"
+#elif defined(CONFIG_TOUCHSCREEN_XPT2046_TSLIB_SPI)
+#include "../../../drivers/input/touchscreen/xpt2046_tslib_ts.h"
+#elif defined(CONFIG_TOUCHSCREEN_XPT2046_CBN_SPI)
+#include "../../../drivers/input/touchscreen/xpt2046_cbn_ts.h"
+#endif
+#include "../../../drivers/misc/gps/rk29_gps.h"
+#include "../../../drivers/tty/serial/sc8800.h"
+#ifdef CONFIG_VIDEO_RK29
+/*---------------- Camera Sensor Macro Define Begin ------------------------*/
+/*---------------- Camera Sensor Configuration Macro Begin ------------------------*/
+#define CONFIG_SENSOR_0 RK29_CAM_SENSOR_OV5640 /* back camera sensor */
+#define CONFIG_SENSOR_IIC_ADDR_0 0x78
+#define CONFIG_SENSOR_IIC_ADAPTER_ID_0 3
+#define CONFIG_SENSOR_POWER_PIN_0 INVALID_GPIO
+#define CONFIG_SENSOR_RESET_PIN_0 INVALID_GPIO
+#define CONFIG_SENSOR_POWERDN_PIN_0 RK29_PIN6_PB7
+#define CONFIG_SENSOR_FALSH_PIN_0 RK29_PIN6_PB5
+#define CONFIG_SENSOR_POWERACTIVE_LEVEL_0 RK29_CAM_POWERACTIVE_L
+#define CONFIG_SENSOR_RESETACTIVE_LEVEL_0 RK29_CAM_RESETACTIVE_L
+#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_0 RK29_CAM_POWERDNACTIVE_H
+#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_0 RK29_CAM_FLASHACTIVE_H
+
+#define CONFIG_SENSOR_TORCH_PIN_0 RK29_PIN4_PD1
+
+
+#define CONFIG_SENSOR_1 RK29_CAM_SENSOR_GC0309 /* front camera sensor */
+#define CONFIG_SENSOR_IIC_ADDR_1 0x42
+#define CONFIG_SENSOR_IIC_ADAPTER_ID_1 3
+#define CONFIG_SENSOR_POWER_PIN_1 INVALID_GPIO
+#define CONFIG_SENSOR_RESET_PIN_1 INVALID_GPIO
+#define CONFIG_SENSOR_POWERDN_PIN_1 RK29_PIN5_PD7
+#define CONFIG_SENSOR_FALSH_PIN_1 INVALID_GPIO
+#define CONFIG_SENSOR_POWERACTIVE_LEVEL_1 RK29_CAM_POWERACTIVE_L
+#define CONFIG_SENSOR_RESETACTIVE_LEVEL_1 RK29_CAM_RESETACTIVE_L
+#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_1 RK29_CAM_POWERDNACTIVE_H
+#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_1 RK29_CAM_FLASHACTIVE_L
+
+#define CONFIG_SENSOR_TORCH_PIN_1 RK29_PIN4_PD1
+
+#endif //#ifdef CONFIG_VIDEO_RK29
+/*---------------- Camera Sensor Configuration Macro End------------------------*/
+#include "../../../drivers/media/video/rk29_camera.c"
+/*---------------- Camera Sensor Macro Define End ------------------------*/
+
+
+#include "../../../drivers/cmmb/siano/smsspiphy.h"
+/* Set memory size of pmem */
+#ifdef CONFIG_RK29_MEM_SIZE_M
+#define SDRAM_SIZE (CONFIG_RK29_MEM_SIZE_M * SZ_1M)
+#else
+#define SDRAM_SIZE SZ_512M
+#endif
+#define PMEM_GPU_SIZE SZ_64M
+#define PMEM_UI_SIZE SZ_32M
+#define PMEM_VPU_SIZE SZ_64M
+#define PMEM_CAM_SIZE PMEM_CAM_NECESSARY
+#ifdef CONFIG_VIDEO_RK29_WORK_IPP
+#define MEM_CAMIPP_SIZE PMEM_CAMIPP_NECESSARY
+#else
+#define MEM_CAMIPP_SIZE 0
+#endif
+#define MEM_FB_SIZE (3*SZ_2M)//(3*SZ_2M)
+#ifdef CONFIG_FB_WORK_IPP
+#define MEM_FBIPP_SIZE SZ_2M//SZ_8M //1920 x 1080 x 2 x 2 //RGB565 = x2;RGB888 = x4
+#else
+#define MEM_FBIPP_SIZE 0
+#endif
+#if SDRAM_SIZE > SZ_512M
+#define PMEM_GPU_BASE (RK29_SDRAM_PHYS + SZ_512M - PMEM_GPU_SIZE)
+#else
+#define PMEM_GPU_BASE (RK29_SDRAM_PHYS + SDRAM_SIZE - PMEM_GPU_SIZE)
+#endif
+#define PMEM_UI_BASE (PMEM_GPU_BASE - PMEM_UI_SIZE)
+#define PMEM_VPU_BASE (PMEM_UI_BASE - PMEM_VPU_SIZE)
+#define PMEM_CAM_BASE (PMEM_VPU_BASE - PMEM_CAM_SIZE)
+#define MEM_CAMIPP_BASE (PMEM_CAM_BASE - MEM_CAMIPP_SIZE)
+#define MEM_FB_BASE (MEM_CAMIPP_BASE - MEM_FB_SIZE)
+#define MEM_FBIPP_BASE (MEM_FB_BASE - MEM_FBIPP_SIZE)
+#define LINUX_SIZE (MEM_FBIPP_BASE - RK29_SDRAM_PHYS)
+
+#define PREALLOC_WLAN_SEC_NUM 4
+#define PREALLOC_WLAN_BUF_NUM 160
+#define PREALLOC_WLAN_SECTION_HEADER 24
+
+#define WLAN_SECTION_SIZE_0 (PREALLOC_WLAN_BUF_NUM * 128)
+#define WLAN_SECTION_SIZE_1 (PREALLOC_WLAN_BUF_NUM * 128)
+#define WLAN_SECTION_SIZE_2 (PREALLOC_WLAN_BUF_NUM * 512)
+#define WLAN_SECTION_SIZE_3 (PREALLOC_WLAN_BUF_NUM * 1024)
+
+#define WLAN_SKB_BUF_NUM 16
+#define UNLOCK_SECURITY_KEY ~(0x1<<5)
+#define LOCK_SECURITY_KEY 0x00
+
+static struct sk_buff *wlan_static_skb[WLAN_SKB_BUF_NUM];
+
+struct wifi_mem_prealloc {
+ void *mem_ptr;
+ unsigned long size;
+};
+
+extern struct sys_timer rk29_timer;
+
+static int rk29_nand_io_init(void)
+{
+ return 0;
+}
+
+struct rk29_nand_platform_data rk29_nand_data = {
+ .width = 1, /* data bus width in bytes */
+ .hw_ecc = 1, /* hw ecc 0: soft ecc */
+ .num_flash = 1,
+ .io_init = rk29_nand_io_init,
+};
+
+#ifdef CONFIG_FB_RK29
+/*****************************************************************************************
+ * lcd devices
+ * author: zyw@rock-chips.com
+ *****************************************************************************************/
+//#ifdef CONFIG_LCD_TD043MGEA1
+#define LCD_RXD_PIN RK29_PIN2_PC7
+#define LCD_TXD_PIN RK29_PIN3_PA1// RK29_PIN2_PC6
+#define LCD_CLK_PIN RK29_PIN3_PA2//RK29_PIN2_PC4
+#define LCD_CS_PIN RK29_PIN3_PA5//RK29_PIN2_PC5
+/*****************************************************************************************
+* frame buffer devices
+* author: zyw@rock-chips.com
+*****************************************************************************************/
+#define FB_ID 0
+#define FB_DISPLAY_ON_PIN INVALID_GPIO//RK29_PIN6_PD0
+#define FB_LCD_STANDBY_PIN INVALID_GPIO//RK29_PIN6_PD1
+#define FB_LCD_CABC_EN_PIN INVALID_GPIO//RK29_PIN6_PD2
+#define FB_MCU_FMK_PIN INVALID_GPIO
+
+#define FB_DISPLAY_ON_VALUE GPIO_HIGH
+#define FB_LCD_STANDBY_VALUE GPIO_HIGH
+
+//#endif
+static int rk29_lcd_io_init(void)
+{
+ int ret = 0;
+ //printk("rk29_lcd_io_init\n");
+ //ret = gpio_request(LCD_RXD_PIN, NULL);
+ ret = gpio_request(LCD_TXD_PIN, NULL);
+ ret = gpio_request(LCD_CLK_PIN, NULL);
+ ret = gpio_request(LCD_CS_PIN, NULL);
+ //rk29_mux_api_set(GPIO2C7_SPI1RXD_NAME,GPIO2H_GPIO2C7);
+ rk29_mux_api_set(GPIO3A1_I2S1SCLK_NAME,GPIO3L_GPIO3A1);
+ rk29_mux_api_set(GPIO3A5_I2S1LRCKTX_NAME,GPIO3L_GPIO3A5);
+ rk29_mux_api_set(GPIO3A2_I2S1LRCKRX_NAME,GPIO3L_GPIO3A2);
+ return ret;
+}
+
+static int rk29_lcd_io_deinit(void)
+{
+ int ret = 0;
+ //printk("rk29_lcd_io_deinit\n");
+ gpio_free(LCD_CS_PIN);
+ gpio_free(LCD_CLK_PIN);
+ gpio_free(LCD_TXD_PIN);
+ //gpio_free(LCD_RXD_PIN);
+ //rk29_mux_api_set(GPIO2C7_SPI1RXD_NAME,GPIO2H_SPI1_RXD);
+ //rk29_mux_api_set(GPIO2C6_SPI1TXD_NAME,GPIO2H_SPI1_TXD);
+ ///rk29_mux_api_set(GPIO2C5_SPI1CSN0_NAME,GPIO2H_SPI1_CSN0);
+ //rk29_mux_api_set(GPIO2C4_SPI1CLK_NAME,GPIO2H_SPI1_CLK);
+ rk29_mux_api_set(GPIO3A1_I2S1SCLK_NAME,GPIO3L_I2S1_SCLK);
+ rk29_mux_api_set(GPIO3A5_I2S1LRCKTX_NAME,GPIO3L_I2S1_LRCK_TX);
+ rk29_mux_api_set(GPIO3A2_I2S1LRCKRX_NAME,GPIO3L_I2S1_LRCK_RX);
+ return ret;
+}
+
+static struct rk29lcd_info rk29_lcd_info = {
+ .txd_pin = LCD_TXD_PIN,
+ .clk_pin = LCD_CLK_PIN,
+ .cs_pin = LCD_CS_PIN,
+ .io_init = rk29_lcd_io_init,
+ .io_deinit = rk29_lcd_io_deinit,
+};
+
+int rk29_fb_io_enable(void)
+{
+ if(FB_DISPLAY_ON_PIN != INVALID_GPIO)
+ {
+ gpio_direction_output(FB_DISPLAY_ON_PIN, 0);
+ gpio_set_value(FB_DISPLAY_ON_PIN, FB_DISPLAY_ON_VALUE);
+ }
+ if(FB_LCD_STANDBY_PIN != INVALID_GPIO)
+ {
+ gpio_direction_output(FB_LCD_STANDBY_PIN, 0);
+ gpio_set_value(FB_LCD_STANDBY_PIN, FB_LCD_STANDBY_VALUE);
+ }
+ return 0;
+}
+
+int rk29_fb_io_disable(void)
+{
+ if(FB_DISPLAY_ON_PIN != INVALID_GPIO)
+ {
+ gpio_direction_output(FB_DISPLAY_ON_PIN, 0);
+ gpio_set_value(FB_DISPLAY_ON_PIN, !FB_DISPLAY_ON_VALUE);
+ }
+ if(FB_LCD_STANDBY_PIN != INVALID_GPIO)
+ {
+ gpio_direction_output(FB_LCD_STANDBY_PIN, 0);
+ gpio_set_value(FB_LCD_STANDBY_PIN, !FB_LCD_STANDBY_VALUE);
+ }
+ return 0;
+}
+
+static int rk29_fb_io_init(struct rk29_fb_setting_info *fb_setting)
+{
+ int ret = 0;
+ if(fb_setting->mcu_fmk_en && (FB_MCU_FMK_PIN != INVALID_GPIO))
+ {
+ ret = gpio_request(FB_MCU_FMK_PIN, NULL);
+ if(ret != 0)
+ {
+ gpio_free(FB_MCU_FMK_PIN);
+ printk(">>>>>> FB_MCU_FMK_PIN gpio_request err \n ");
+ }
+ gpio_direction_input(FB_MCU_FMK_PIN);
+ }
+ if(fb_setting->disp_on_en && (FB_DISPLAY_ON_PIN != INVALID_GPIO))
+ {
+ ret = gpio_request(FB_DISPLAY_ON_PIN, NULL);
+ if(ret != 0)
+ {
+ gpio_free(FB_DISPLAY_ON_PIN);
+ printk(">>>>>> FB_DISPLAY_ON_PIN gpio_request err \n ");
+ }
+ }
+
+ if(fb_setting->disp_on_en && (FB_LCD_STANDBY_PIN != INVALID_GPIO))
+ {
+ ret = gpio_request(FB_LCD_STANDBY_PIN, NULL);
+ if(ret != 0)
+ {
+ gpio_free(FB_LCD_STANDBY_PIN);
+ printk(">>>>>> FB_LCD_STANDBY_PIN gpio_request err \n ");
+ }
+ }
+
+ if(FB_LCD_CABC_EN_PIN != INVALID_GPIO)
+ {
+ ret = gpio_request(FB_LCD_CABC_EN_PIN, NULL);
+ if(ret != 0)
+ {
+ gpio_free(FB_LCD_CABC_EN_PIN);
+ printk(">>>>>> FB_LCD_CABC_EN_PIN gpio_request err \n ");
+ }
+ gpio_direction_output(FB_LCD_CABC_EN_PIN, 0);
+ gpio_set_value(FB_LCD_CABC_EN_PIN, GPIO_LOW);
+ }
+ rk29_fb_io_enable(); //enable it
+
+ return ret;
+}
+
+static struct rk29fb_info rk29_fb_info = {
+ .fb_id = FB_ID,
+ .mcu_fmk_pin = FB_MCU_FMK_PIN,
+ .lcd_info = &rk29_lcd_info,
+ .io_init = rk29_fb_io_init,
+ .io_enable = rk29_fb_io_enable,
+ .io_disable = rk29_fb_io_disable,
+};
+
+/* rk29 fb resource */
+static struct resource rk29_fb_resource[] = {
+ [0] = {
+ .name = "lcdc reg",
+ .start = RK29_LCDC_PHYS,
+ .end = RK29_LCDC_PHYS + RK29_LCDC_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "lcdc irq",
+ .start = IRQ_LCDC,
+ .end = IRQ_LCDC,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .name = "win1 buf",
+ .start = MEM_FB_BASE,
+ .end = MEM_FB_BASE + MEM_FB_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ #ifdef CONFIG_FB_WORK_IPP
+ [3] = {
+ .name = "win1 ipp buf",
+ .start = MEM_FBIPP_BASE,
+ .end = MEM_FBIPP_BASE + MEM_FBIPP_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ #endif
+};
+
+/*platform_device*/
+struct platform_device rk29_device_fb = {
+ .name = "rk29-fb",
+ .id = 4,
+ .num_resources = ARRAY_SIZE(rk29_fb_resource),
+ .resource = rk29_fb_resource,
+ .dev = {
+ .platform_data = &rk29_fb_info,
+ }
+};
+
+struct platform_device rk29_device_dma_cpy = {
+ .name = "dma_memcpy",
+ .id = 4,
+
+};
+
+#endif
+
+static struct android_pmem_platform_data android_pmem_pdata = {
+ .name = "pmem",
+ .start = PMEM_UI_BASE,
+ .size = PMEM_UI_SIZE,
+ .no_allocator = 0,
+ .cached = 1,
+};
+
+static struct platform_device android_pmem_device = {
+ .name = "android_pmem",
+ .id = 0,
+ .dev = {
+ .platform_data = &android_pmem_pdata,
+ },
+};
+
+
+static struct vpu_mem_platform_data vpu_mem_pdata = {
+ .name = "vpu_mem",
+ .start = PMEM_VPU_BASE,
+ .size = PMEM_VPU_SIZE,
+ .cached = 1,
+};
+
+static struct platform_device rk29_vpu_mem_device = {
+ .name = "vpu_mem",
+ .id = 2,
+ .dev = {
+ .platform_data = &vpu_mem_pdata,
+ },
+};
+
+static struct platform_device rk29_v4l2_output_devce = {
+ .name = "rk29_vout",
+};
+
+/* HANNSTAR_P1003 touch I2C */
+#if defined (CONFIG_HANNSTAR_P1003)
+#define TOUCH_RESET_PIN RK29_PIN6_PC3
+#define TOUCH_INT_PIN RK29_PIN4_PD5
+
+int p1003_init_platform_hw(void)
+{
+ if(gpio_request(TOUCH_RESET_PIN,NULL) != 0){
+ gpio_free(TOUCH_RESET_PIN);
+ printk("p1003_init_platform_hw gpio_request error\n");
+ return -EIO;
+ }
+
+ if(gpio_request(TOUCH_INT_PIN,NULL) != 0){
+ gpio_free(TOUCH_INT_PIN);
+ printk("p1003_init_platform_hw gpio_request error\n");
+ return -EIO;
+ }
+ gpio_pull_updown(TOUCH_INT_PIN, 1);
+ gpio_direction_output(TOUCH_RESET_PIN, 0);
+ msleep(500);
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW);
+ msleep(500);
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH);
+
+ return 0;
+}
+
+
+struct p1003_platform_data p1003_info = {
+ .model= 1003,
+ .init_platform_hw= p1003_init_platform_hw,
+
+};
+#endif
+
+
+#if defined(CONFIG_TOUCHSCREEN_GT801_IIC)
+#include "../../../drivers/input/touchscreen/gt801_ts.h"
+#define GT801_GPIO_INT RK29_PIN4_PD5
+#define GT801_GPIO_RESET RK29_PIN6_PC3
+static struct gt801_platform_data gt801_info = {
+ .model = 801,
+ .swap_xy = 0,
+ .x_min = 0,
+ .x_max = 480,
+ .y_min = 0,
+ .y_max = 800,
+ .gpio_reset = GT801_GPIO_RESET,
+ .gpio_reset_active_low = 0,
+ .gpio_pendown = GT801_GPIO_INT,
+ .pendown_iomux_name = GPIO4D5_CPUTRACECTL_NAME,
+ .resetpin_iomux_name = NULL,
+ .pendown_iomux_mode = GPIO4H_GPIO4D5,
+ .resetpin_iomux_mode = 0,
+};
+#endif
+
+
+#if defined(CONFIG_TOUCHSCREEN_GT818_IIC)
+#include "../../../drivers/input/touchscreen/gt818_ts.h"
+#define GT818_GPIO_INT RK29_PIN4_PD5
+#define GT818_GPIO_RESET RK29_PIN6_PC3
+static struct gt818_platform_data gt818_info = {
+ .model = 818,
+ .swap_xy = 0,
+ .x_min = 0,
+ .x_max = 480,
+ .y_min = 0,
+ .y_max = 800,
+ .gpio_reset = GT818_GPIO_RESET,
+ .gpio_reset_active_low = 0,
+ .gpio_pendown = GT818_GPIO_INT,
+ .pendown_iomux_name = GPIO4D5_CPUTRACECTL_NAME,
+ .resetpin_iomux_name = NULL,
+ .pendown_iomux_mode = GPIO4H_GPIO4D5,
+ .resetpin_iomux_mode = 0,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_ILI2102_IIC)
+#include "../../../drivers/input/touchscreen/ili2102_ts.h"
+#define GT801_GPIO_INT RK29_PIN4_PD5
+#define GT801_GPIO_RESET RK29_PIN6_PC3
+static struct ili2102_platform_data ili2102_info = {
+ .model = 2102,
+ .swap_xy = 0,
+ .x_min = 0,
+ .x_max = 481,
+ .y_min = 0,
+ .y_max = 801,
+ .gpio_reset = GT801_GPIO_RESET,
+ .gpio_reset_active_low = 1,
+ .gpio_pendown = GT801_GPIO_INT,
+ .pendown_iomux_name = GPIO4D5_CPUTRACECTL_NAME,
+ .resetpin_iomux_name = NULL,
+ .pendown_iomux_mode = GPIO4H_GPIO4D5,
+ .resetpin_iomux_mode = 0,
+};
+#endif
+
+/* EETI_EGALAX touch I2C */
+#if defined (CONFIG_EETI_EGALAX)
+#define TOUCH_RESET_PIN RK29_PIN6_PC3
+#define TOUCH_INT_PIN RK29_PIN4_PD5
+
+static int EETI_EGALAX_init_platform_hw(void)
+{
+ if(gpio_request(TOUCH_RESET_PIN,NULL) != 0){
+ gpio_free(TOUCH_RESET_PIN);
+ printk("p1003_init_platform_hw gpio_request error\n");
+ return -EIO;
+ }
+
+ if(gpio_request(TOUCH_INT_PIN,NULL) != 0){
+ gpio_free(TOUCH_INT_PIN);
+ printk("p1003_init_platform_hw gpio_request error\n");
+ return -EIO;
+ }
+ gpio_pull_updown(TOUCH_INT_PIN, 1);
+ gpio_direction_output(TOUCH_RESET_PIN, 0);
+ msleep(500);
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW);
+ msleep(500);
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH);
+
+ return 0;
+}
+
+
+static struct eeti_egalax_platform_data eeti_egalax_info = {
+ .model= 1003,
+ .init_platform_hw= EETI_EGALAX_init_platform_hw,
+
+};
+
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_PIXCIR)
+#include "../../../drivers/input/touchscreen/pixcir_i2c_ts.h"
+static struct pixcir_platform_data pixcir_info = {
+ .model = 801,
+ .swap_xy = 0,
+ .x_min = 0,
+ .x_max = 480,
+ .y_min = 0,
+ .y_max = 800,
+ .gpio_reset = RK29_PIN6_PC3,
+ .gpio_reset_active_low = 1,
+ .gpio_pendown = RK29_PIN4_PD5,
+ .pendown_iomux_name = GPIO4D5_CPUTRACECTL_NAME,
+ .resetpin_iomux_name = NULL,
+ .pendown_iomux_mode = GPIO4H_GPIO4D5,
+ .resetpin_iomux_mode = 0,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_FT5X0X)
+#include "../../../drivers/input/touchscreen/ft5x0x_ts.h"
+static struct ft5x0x_platform_data ft5x0x_info = {
+ .model = 5000,
+ .swap_xy = 0,
+ .x_min = 0,
+ .x_max = 480,
+ .y_min = 0,
+ .y_max = 800,
+ .gpio_reset = RK29_PIN6_PC3,
+ .gpio_reset_active_low = 1,
+ .gpio_pendown = RK29_PIN4_PD5,
+ .pendown_iomux_name = GPIO4D5_CPUTRACECTL_NAME,
+ .resetpin_iomux_name = NULL,
+ .pendown_iomux_mode = GPIO4H_GPIO4D5,
+ .resetpin_iomux_mode = 0,
+};
+#endif
+/*MMA8452 gsensor*/
+#if defined (CONFIG_GS_MMA8452)
+#define MMA8452_INT_PIN RK29_PIN6_PC4
+
+static int mma8452_init_platform_hw(void)
+{
+
+ if(gpio_request(MMA8452_INT_PIN,NULL) != 0){
+ gpio_free(MMA8452_INT_PIN);
+ printk("mma8452_init_platform_hw gpio_request error\n");
+ return -EIO;
+ }
+ gpio_pull_updown(MMA8452_INT_PIN, 1);
+ return 0;
+}
+
+
+static struct mma8452_platform_data mma8452_info = {
+ .model= 8452,
+ .swap_xy = 0,
+ .init_platform_hw= mma8452_init_platform_hw,
+
+};
+#endif
+/*BMA023 gsensor*/
+#if defined (CONFIG_GS_BMA023)
+#define BMA023_INT_PIN RK29_PIN6_PC4
+
+static int bma023_init_platform_hw(void)
+{
+
+ if(gpio_request(BMA023_INT_PIN,NULL) != 0){
+ gpio_free(BMA023_INT_PIN);
+ printk("bma023_init_platform_hw gpio_request error\n");
+ return -EIO;
+ }
+ gpio_pull_updown(BMA023_INT_PIN, 1);
+ return 0;
+}
+
+
+static struct bma023_platform_data bma023_info = {
+ .model= 023,
+ .swap_xy = 0,
+ .swap_xyz = 1,
+ .orientation = {1,0,0,
+ 0,0,1,
+ 0,1,0},
+ .init_platform_hw= bma023_init_platform_hw,
+
+};
+#endif
+#if defined (CONFIG_MPU_SENSORS_MPU3050)
+/*mpu3050*/
+static struct mpu3050_platform_data mpu3050_data = {
+ .int_config = 0x10,
+ //.orientation = { 1, 0, 0,0, -1, 0,0, 0, 1 },
+ //.orientation = { 0, 1, 0,-1, 0, 0,0, 0, -1 },
+ //.orientation = { -1, 0, 0,0, -1, 0,0, 0, -1 },
+ //.orientation = { 0, 1, 0, -1, 0, 0, 0, 0, 1 },
+ .orientation = { 1, 0, 0,0, 1, 0, 0, 0, 1 },
+ .level_shifter = 0,
+#if defined (CONFIG_MPU_SENSORS_KXTF9)
+ .accel = {
+#ifdef CONFIG_MPU_SENSORS_MPU3050_MODULE
+ .get_slave_descr = NULL ,
+#else
+ .get_slave_descr = get_accel_slave_descr ,
+#endif
+ .adapt_num = 0, // The i2c bus to which the mpu device is
+ // connected
+ //.irq = RK29_PIN6_PC4,
+ .bus = EXT_SLAVE_BUS_SECONDARY, //The secondary I2C of MPU
+ .address = 0x0f,
+ //.orientation = { 1, 0, 0,0, 1, 0,0, 0, 1 },
+ //.orientation = { 0, -1, 0,-1, 0, 0,0, 0, -1 },
+ //.orientation = { 0, 1, 0,1, 0, 0,0, 0, -1 },
+ //.orientation = { 0, 1 ,0, -1 ,0, 0, 0, 0, 1 },
+ .orientation = {1, 0, 0, 0, 1, 0, 0, 0, 1},
+ },
+#endif
+#if defined (CONFIG_MPU_SENSORS_AK8975)
+ .compass = {
+#ifdef CONFIG_MPU_SENSORS_MPU3050_MODULE
+ .get_slave_descr = NULL,/*ak5883_get_slave_descr,*/
+#else
+ .get_slave_descr = get_compass_slave_descr,
+#endif
+ .adapt_num = 0, // The i2c bus to which the compass device is.
+ // It can be difference with mpu
+ // connected
+ //.irq = RK29_PIN6_PC5,
+ .bus = EXT_SLAVE_BUS_PRIMARY,
+ .address = 0x0d,
+ //.orientation = { -1, 0, 0,0, -1, 0,0, 0, 1 },
+ //.orientation = { 0, -1, 0,-1, 0, 0,0, 0, -1 },
+ //.orientation = { 0, 1, 0,1, 0, 0,0, 0, -1 },
+ //.orientation = { 0, -1, 0, 1, 0, 0, 0, 0, 1 },
+ .orientation = {0, 1, 0, -1, 0, 0, 0, 0, 1},
+ },
+#endif
+};
+#endif
+
+#if defined(CONFIG_GPIO_WM831X)
+struct rk29_gpio_expander_info wm831x_gpio_settinginfo[] = {
+ {
+ .gpio_num =WM831X_P01,// tp3
+ .pin_type = GPIO_OUT,
+ .pin_value =GPIO_HIGH,
+ },
+
+ {
+ .gpio_num =WM831X_P02,//tp4
+ .pin_type = GPIO_OUT,
+ .pin_value =GPIO_HIGH,
+ },
+ {
+ .gpio_num =WM831X_P03,//tp2
+ .pin_type = GPIO_OUT,
+ .pin_value =GPIO_HIGH,
+ },
+ {
+ .gpio_num =WM831X_P04,//tp1
+ .pin_type = GPIO_OUT,
+ .pin_value =GPIO_HIGH,
+ },
+ {
+ .gpio_num =WM831X_P05,//tp1
+ .pin_type = GPIO_OUT,
+ .pin_value =GPIO_HIGH,
+ },
+ {
+ .gpio_num =WM831X_P06,//tp1
+ .pin_type = GPIO_OUT,
+ .pin_value =GPIO_HIGH,
+ },
+ {
+ .gpio_num =WM831X_P07,//tp1
+ .pin_type = GPIO_OUT,
+ .pin_value =GPIO_HIGH,
+ },
+ {
+ .gpio_num =WM831X_P08,//tp1
+ .pin_type = GPIO_OUT,
+ .pin_value =GPIO_HIGH,
+ },
+ {
+ .gpio_num =WM831X_P09,//tp1
+ .pin_type = GPIO_OUT,
+ .pin_value =GPIO_HIGH,
+ },
+ {
+ .gpio_num =WM831X_P10,//tp1
+ .pin_type = GPIO_OUT,
+ .pin_value =GPIO_HIGH,
+ },
+ {
+ .gpio_num =WM831X_P11,//tp1
+ .pin_type = GPIO_OUT,
+ .pin_value =GPIO_HIGH,
+ },
+ {
+ .gpio_num =WM831X_P12,
+ .pin_type = GPIO_OUT,
+ .pin_value =GPIO_HIGH,
+ },
+};
+
+#endif
+
+
+
+#if defined(CONFIG_MFD_WM831X)
+static struct wm831x *gWm831x;
+int wm831x_pre_init(struct wm831x *parm)
+{
+ int ret;
+ printk("%s\n", __FUNCTION__);
+ gWm831x = parm;
+ //ILIM = 900ma
+ ret = wm831x_reg_read(parm, WM831X_POWER_STATE) & 0xffff;
+ wm831x_reg_write(parm, WM831X_POWER_STATE, (ret&0xfff8) | 0x04);
+
+ //BATT_FET_ENA = 1
+ wm831x_reg_write(parm,WM831X_SECURITY_KEY,0x9716); // unlock security key
+ wm831x_set_bits(parm, WM831X_RESET_CONTROL,0x1000,0x1000);
+ ret = wm831x_reg_read(parm, WM831X_RESET_CONTROL) & 0xffff&UNLOCK_SECURITY_KEY;// enternal reset active in sleep
+ printk("%s:WM831X_RESET_CONTROL=0x%x\n",__FUNCTION__,ret);
+ wm831x_reg_write(parm, WM831X_RESET_CONTROL, ret);
+
+
+ wm831x_reg_write(parm,WM831X_SECURITY_KEY,LOCK_SECURITY_KEY); // lock security key
+
+
+#if 0
+ wm831x_set_bits(parm, WM831X_LDO_ENABLE, (1 << 3), 0);
+ wm831x_set_bits(parm, WM831X_LDO_ENABLE, (1 << 7), 0);
+ printk("%s:disable ldo4 and ldo8 because they are enabled in uboot\n",__FUNCTION__);
+#endif
+ return 0;
+}
+void cmmb_io_set_for_pm(void);
+int wm831x_post_init(struct wm831x *parm)
+{
+ struct regulator *dcdc;
+ struct regulator *ldo;
+
+ dcdc = regulator_get(NULL, "dcdc3"); // 1th IO
+ regulator_set_voltage(dcdc,3000000,3000000);
+ regulator_set_suspend_voltage(dcdc, 2800000);
+ regulator_enable(dcdc);
+ printk("%s set dcdc3=%dmV end\n", __FUNCTION__, regulator_get_voltage(dcdc));
+ regulator_put(dcdc);
+ udelay(100);
+
+ ldo = regulator_get(NULL, "ldo10"); // 1th modem IO
+ regulator_set_voltage(ldo,2800000,2800000);
+ regulator_set_suspend_voltage(ldo,2800000);
+ regulator_enable(ldo);
+ printk("%s set ldo10=%dmV end\n", __FUNCTION__, regulator_get_voltage(ldo));
+ regulator_put(ldo);
+ udelay(100);
+
+ dcdc = regulator_get(NULL, "dcdc2"); // 2th CORE
+ regulator_set_voltage(dcdc,1300000,1300000);
+ regulator_set_suspend_voltage(dcdc,1000000);
+ regulator_enable(dcdc);
+ printk("%s set dcdc2=%dmV end\n", __FUNCTION__, regulator_get_voltage(dcdc));
+ regulator_put(dcdc);
+ udelay(100);
+
+ dcdc = regulator_get(NULL, "dcdc1"); // 3th ddr
+ regulator_set_voltage(dcdc,1800000,1800000);
+ regulator_set_suspend_voltage(dcdc, 1800000);
+ regulator_enable(dcdc);
+ printk("%s set dcdc1=%dmV end\n", __FUNCTION__, regulator_get_voltage(dcdc));
+ regulator_put(dcdc);
+ udelay(100);
+
+ ldo = regulator_get(NULL, "ldo1"); // 3th nand
+ regulator_set_voltage(ldo,1800000,1800000);
+ regulator_set_suspend_voltage(ldo,1800000);
+ regulator_enable(ldo);
+ printk("%s set ldo1=%dmV end\n", __FUNCTION__, regulator_get_voltage(ldo));
+ regulator_put(ldo);
+ udelay(100);
+
+ ldo = regulator_get(NULL, "ldo4"); // 4th usb
+ regulator_set_voltage(ldo,2500000,2500000);
+ regulator_set_suspend_voltage(ldo,0000000);
+ regulator_enable(ldo);
+ printk("%s set ldo4=%dmV end\n", __FUNCTION__, regulator_get_voltage(ldo));
+ regulator_put(ldo);
+ udelay(100);
+
+ ldo = regulator_get(NULL, "ldo7"); // 5th usb
+ regulator_set_voltage(ldo,3300000,3300000);
+ regulator_set_suspend_voltage(ldo,3300000);
+ regulator_enable(ldo);
+ printk("%s set ldo7=%dmV end\n", __FUNCTION__, regulator_get_voltage(ldo));
+ regulator_put(ldo);
+ udelay(100);
+
+ dcdc = regulator_get(NULL, "dcdc4"); // backlight
+ regulator_set_voltage(dcdc,20000000,20000000);
+ regulator_set_suspend_voltage(dcdc, 20000000);
+ regulator_enable(dcdc);
+ printk("%s set dcdc4=%dmV end\n", __FUNCTION__, regulator_get_voltage(dcdc));
+ regulator_put(dcdc);
+ udelay(100);
+#if 1
+
+ ldo = regulator_get(NULL, "ldo2"); //lcd
+ regulator_set_voltage(ldo,2800000,2800000);
+ regulator_set_suspend_voltage(ldo,2800000);
+ regulator_enable(ldo);
+ printk("%s set ldo2=%dmV end\n", __FUNCTION__, regulator_get_voltage(ldo));
+ regulator_put(ldo);
+
+
+ ldo = regulator_get(NULL, "ldo5"); //tf
+ regulator_set_voltage(ldo,3000000,3000000);
+ regulator_set_suspend_voltage(ldo,3000000);
+ regulator_enable(ldo);
+ printk("%s set ldo5=%dmV end\n", __FUNCTION__, regulator_get_voltage(ldo));
+ regulator_put(ldo);
+
+ ldo = regulator_get(NULL, "ldo6"); //camera
+ regulator_set_voltage(ldo,2800000,2800000);
+ regulator_set_suspend_voltage(ldo,2800000);
+ regulator_enable(ldo);
+ printk("%s set ldo6=%dmV end\n", __FUNCTION__, regulator_get_voltage(ldo));
+ regulator_put(ldo);
+
+
+/*
+ ldo = regulator_get(NULL, "ldo3"); //sram
+ regulator_set_voltage(ldo,1800000,1800000);
+ regulator_set_suspend_voltage(ldo,1800000);
+ regulator_enable(ldo);
+ printk("%s set ldo3=%dmV end\n", __FUNCTION__, regulator_get_voltage(ldo));
+ regulator_put(ldo); */
+
+
+
+#endif
+
+ ldo = regulator_get(NULL, "ldo11");
+ //regulator_enable(ldo);
+ printk("%s set ldo11=%dmV end\n", __FUNCTION__, regulator_get_voltage(ldo));
+ regulator_put(ldo);
+
+#if defined(CONFIG_SMS_SPI_ROCKCHIP)
+ cmmb_io_set_for_pm();
+#endif
+
+ return 0;
+}
+
+extern void wm831x_enter_sleep(void);
+extern void wm831x_exit_sleep(void);
+
+void pmu_wm831x_set_suspend_voltage(void)
+{
+
+}
+EXPORT_SYMBOL_GPL(pmu_wm831x_set_suspend_voltage);
+
+void pmu_wm831x_set_resume_voltage(void)
+{
+
+}
+EXPORT_SYMBOL_GPL(pmu_wm831x_set_resume_voltage);
+
+int wm831x_last_deinit(struct wm831x *parm)
+{
+ struct regulator* ldo;
+
+ printk("%s\n", __FUNCTION__);
+ ldo = regulator_get(NULL, "ldo1");
+ regulator_disable(ldo);
+ regulator_put(ldo);
+
+ ldo = regulator_get(NULL, "ldo2");
+ regulator_disable(ldo);
+ regulator_put(ldo);
+
+ ldo = regulator_get(NULL, "ldo3");
+ regulator_disable(ldo);
+ regulator_put(ldo);
+
+ ldo = regulator_get(NULL, "ldo4");
+ //regulator_disable(ldo);
+ regulator_put(ldo);
+
+ ldo = regulator_get(NULL, "ldo5");
+ regulator_disable(ldo);
+ regulator_put(ldo);
+
+ ldo = regulator_get(NULL, "ldo6");
+ regulator_disable(ldo);
+ regulator_put(ldo);
+
+ ldo = regulator_get(NULL, "ldo7");
+ regulator_disable(ldo);
+ regulator_put(ldo);
+
+ ldo = regulator_get(NULL, "ldo8");
+ //regulator_disable(ldo);
+ regulator_put(ldo);
+
+ ldo = regulator_get(NULL, "ldo9");
+ regulator_disable(ldo);
+ regulator_put(ldo);
+
+ ldo = regulator_get(NULL, "ldo10");
+ regulator_disable(ldo);
+ regulator_put(ldo);
+
+ return 0;
+}
+
+struct wm831x_backlight_pdata wm831x_backlight_platdata = {
+ .isink = 1, /** ISINK to use, 1 or 2 */
+ .max_uA = 19484, /** Maximum current to allow */
+};
+
+struct wm831x_backup_pdata wm831x_backup_platdata = {
+ .charger_enable = 1,
+ .no_constant_voltage = 0, /** Disable constant voltage charging */
+ .vlim = 3100, /** Voltage limit in milivolts */
+ .ilim = 300, /** Current limit in microamps */
+};
+
+struct wm831x_battery_pdata wm831x_battery_platdata = {
+ .enable = 1, /** Enable charging */
+ .fast_enable = 1, /** Enable fast charging */
+ .off_mask = 1, /** Mask OFF while charging */
+ .trickle_ilim = 200, /** Trickle charge current limit, in mA */
+ .vsel = 4200, /** Target voltage, in mV */
+ .eoc_iterm = 50, /** End of trickle charge current, in mA */
+ .fast_ilim = 500, /** Fast charge current limit, in mA */
+ .timeout = 480, /** Charge cycle timeout, in minutes */
+ .syslo = 3500, /* syslo threshold, in mV*/
+ .sysok = 3500, /* sysko threshold, in mV*/
+};
+
+struct wm831x_status_pdata wm831x_status_platdata[WM831X_MAX_STATUS] = {
+ {
+ .default_src = WM831X_STATUS_OTP,
+ .name = "wm831x_status0",
+ .default_trigger = "wm831x_otp",
+ },
+ {
+ .default_src = WM831X_STATUS_POWER,
+ .name = "wm831x_status1",
+ .default_trigger = "wm831x_power",
+ },
+};
+
+
+static struct regulator_consumer_supply dcdc1_consumers[] = {
+ {
+ .supply = "dcdc1",
+ }
+};
+static struct regulator_consumer_supply dcdc2_consumers[] = {
+ {
+ .supply = "dcdc2",
+ },
+ {
+ .supply = "vcore",
+ }
+};
+static struct regulator_consumer_supply dcdc3_consumers[] = {
+ {
+ .supply = "dcdc3",
+ }
+};
+static struct regulator_consumer_supply dcdc4_consumers[] = {
+ {
+ .supply = "dcdc4",
+ }
+};
+static struct regulator_consumer_supply epe1_consumers[] = {
+ {
+ .supply = "epe1",
+ }
+};
+static struct regulator_consumer_supply epe2_consumers[] = {
+ {
+ .supply = "epe2",
+ }
+};
+static struct regulator_consumer_supply ldo1_consumers[] = {
+ {
+ .supply = "ldo1",
+ }
+};
+static struct regulator_consumer_supply ldo2_consumers[] = {
+ {
+ .supply = "ldo2",
+ }
+};
+static struct regulator_consumer_supply ldo3_consumers[] = {
+ {
+ .supply = "ldo3",
+ }
+};
+static struct regulator_consumer_supply ldo4_consumers[] = {
+ {
+ .supply = "ldo4",
+ }
+};
+static struct regulator_consumer_supply ldo5_consumers[] = {
+ {
+ .supply = "ldo5",
+ }
+};
+static struct regulator_consumer_supply ldo6_consumers[] = {
+ {
+ .supply = "ldo6",
+ }
+};
+static struct regulator_consumer_supply ldo7_consumers[] = {
+ {
+ .supply = "ldo7",
+ }
+};
+static struct regulator_consumer_supply ldo8_consumers[] = {
+ {
+ .supply = "ldo8",
+ }
+};
+static struct regulator_consumer_supply ldo9_consumers[] = {
+ {
+ .supply = "ldo9",
+ }
+};
+static struct regulator_consumer_supply ldo10_consumers[] = {
+ {
+ .supply = "ldo10",
+ }
+};
+static struct regulator_consumer_supply ldo11_consumers[] = {
+ {
+ .supply = "ldo11",
+ }
+};
+static struct regulator_consumer_supply isink1_consumers[] = {
+ {
+ .supply = "isink1",
+ }
+};
+static struct regulator_consumer_supply isink2_consumers[] = {
+ {
+ .supply = "isink2",
+ }
+};
+
+struct regulator_init_data wm831x_regulator_init_dcdc[WM831X_MAX_DCDC] = {
+ {
+ .constraints = {
+ .name = "DCDC1",
+ .min_uV = 600000,
+ .max_uV = 1800000,//0.6-1.8V
+ .apply_uV = true,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(dcdc1_consumers),
+ .consumer_supplies = dcdc1_consumers,
+ },
+ {
+ .constraints = {
+ .name = "DCDC2",
+ .min_uV = 600000,
+ .max_uV = 1800000,//0.6-1.8V
+ .apply_uV = true,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(dcdc2_consumers),
+ .consumer_supplies = dcdc2_consumers,
+ },
+ {
+ .constraints = {
+ .name = "DCDC3",
+ .min_uV = 850000,
+ .max_uV = 3400000,//0.85-3.4V
+ .apply_uV = true,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(dcdc3_consumers),
+ .consumer_supplies = dcdc3_consumers,
+ },
+ {
+ .constraints = {
+ .name = "DCDC4",
+ .min_uV = 00000000,
+ .max_uV = 30000000,//30V/40mA
+ .apply_uV = true,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(dcdc4_consumers),
+ .consumer_supplies = dcdc4_consumers,
+ },
+
+};
+struct regulator_init_data wm831x_regulator_init_epe[WM831X_MAX_EPE] = {
+ {
+ .constraints = {
+ .name = "EPE1",
+ .min_uV = 1200000,
+ .max_uV = 3000000,
+ .apply_uV = true,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(epe1_consumers),
+ .consumer_supplies = epe1_consumers,
+ },
+ {
+ .constraints = {
+ .name = "EPE2",
+ .min_uV = 1200000,
+ .max_uV = 3000000,
+ .apply_uV = true,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(epe2_consumers),
+ .consumer_supplies = epe2_consumers,
+ },
+};
+
+struct regulator_init_data wm831x_regulator_init_ldo[WM831X_MAX_LDO] = {
+ {
+ .constraints = {
+ .name = "LDO1",
+ .min_uV = 900000,
+ .max_uV = 3300000,
+ .apply_uV = true,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo1_consumers),
+ .consumer_supplies = ldo1_consumers,
+ },
+ {
+ .constraints = {
+ .name = "LDO2",
+ .min_uV = 900000,
+ .max_uV = 3300000,
+ .apply_uV = true,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
+ .consumer_supplies = ldo2_consumers,
+ },
+ {
+ .constraints = {
+ .name = "LDO3",
+ .min_uV = 900000,
+ .max_uV = 3300000,
+ .apply_uV = true,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo3_consumers),
+ .consumer_supplies = ldo3_consumers,
+ },
+ {
+ .constraints = {
+ .name = "LDO4",
+ .min_uV = 900000,
+ .max_uV = 3300000,
+ .apply_uV = true,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo4_consumers),
+ .consumer_supplies = ldo4_consumers,
+ },
+ {
+ .constraints = {
+ .name = "LDO5",
+ .min_uV = 900000,
+ .max_uV = 3300000,
+ .apply_uV = true,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo5_consumers),
+ .consumer_supplies = ldo5_consumers,
+ },
+ {
+ .constraints = {
+ .name = "LDO6",
+ .min_uV = 900000,
+ .max_uV = 3300000,
+ .apply_uV = true,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo6_consumers),
+ .consumer_supplies = ldo6_consumers,
+ },
+ {
+ .constraints = {
+ .name = "LDO7",
+ .min_uV = 1000000,
+ .max_uV = 3500000,
+ .apply_uV = true,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo7_consumers),
+ .consumer_supplies = ldo7_consumers,
+ },
+ {
+ .constraints = {
+ .name = "LDO8",
+ .min_uV = 1000000,
+ .max_uV = 3500000,
+ .apply_uV = true,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo8_consumers),
+ .consumer_supplies = ldo8_consumers,
+ },
+ {
+ .constraints = {
+ .name = "LDO9",
+ .min_uV = 1000000,
+ .max_uV = 3500000,
+ .apply_uV = true,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo9_consumers),
+ .consumer_supplies = ldo9_consumers,
+ },
+ {
+ .constraints = {
+ .name = "LDO10",
+ .min_uV = 1000000,
+ .max_uV = 3500000,
+ .apply_uV = true,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo10_consumers),
+ .consumer_supplies = ldo10_consumers,
+ },
+ {
+ .constraints = {
+ .name = "LDO11",
+ .min_uV = 1200000,
+ .max_uV = 3000000,
+ .apply_uV = true,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo11_consumers),
+ .consumer_supplies = ldo11_consumers,
+ },
+};
+
+struct regulator_init_data wm831x_regulator_init_isink[WM831X_MAX_ISINK] = {
+ {
+ .constraints = {
+ .name = "ISINK1",
+ .min_uA = 00000,
+ .max_uA = 40000,
+ .always_on = true,
+ .apply_uV = true,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_CURRENT,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(isink1_consumers),
+ .consumer_supplies = isink1_consumers,
+ },
+ {
+ .constraints = {
+ .name = "ISINK2",
+ .min_uA = 0000000,
+ .max_uA = 0000000,
+ .apply_uV = false,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_CURRENT,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(isink2_consumers),
+ .consumer_supplies = isink2_consumers,
+ },
+};
+
+static int wm831x_checkrange(int start,int num,int val)
+{
+ if((val<(start+num))&&(val>=start))
+ return 0;
+ else
+ return -1;
+}
+
+static int wm831x_init_pin_type(struct wm831x *wm831x)
+{
+#if 1
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ struct rk29_gpio_expander_info *wm831x_gpio_settinginfo;
+ uint16_t offset = 0;
+ uint16_t wm831x_settingpin_num = 0;
+ uint16_t ret = 0;
+ int i = 0;
+
+ if(wm831x)
+ {
+ wm831x_gpio_settinginfo=pdata->settinginfo;
+ if(wm831x_gpio_settinginfo)
+ {
+ wm831x_settingpin_num = pdata->settinginfolen;
+ for(i=0;i<wm831x_settingpin_num;i++)
+ {
+ if(!wm831x_checkrange(pdata->gpio_base,pdata->gpio_pin_num,wm831x_gpio_settinginfo[i].gpio_num))
+ {
+ offset = wm831x_gpio_settinginfo[i].gpio_num - pdata->gpio_base;
+
+ if(wm831x_gpio_settinginfo[i].pin_type==GPIO_IN)
+ {
+ wm831x_set_bits(wm831x,(WM831X_GPIO1_CONTROL+offset), WM831X_GPN_DIR_MASK|WM831X_GPN_TRI_MASK, 1<<WM831X_GPN_DIR_SHIFT|1<<WM831X_GPN_TRI_SHIFT);
+ }
+ else
+ {
+ wm831x_set_bits(wm831x,(WM831X_GPIO1_CONTROL+offset), WM831X_GPN_DIR_MASK|WM831X_GPN_TRI_MASK, 1<<WM831X_GPN_TRI_SHIFT);
+ if(wm831x_gpio_settinginfo[i].pin_value==GPIO_HIGH)
+ {
+ wm831x_set_bits(wm831x, WM831X_GPIO_LEVEL, (1 << offset),(1 << offset));
+ }
+ else
+ {
+ wm831x_set_bits(wm831x, WM831X_GPIO_LEVEL, (1 << offset),(0 << offset));
+ }
+ }
+
+ }
+ }
+ }
+ }
+
+ for(i=0;i<pdata->gpio_pin_num;i++)
+ {
+ wm831x_set_bits(wm831x,(WM831X_GPIO1_CONTROL+i),
+ WM831X_GPN_PULL_MASK|WM831X_GPN_POL_MASK|WM831X_GPN_OD_MASK|WM831X_GPN_TRI_MASK,
+ 1<<WM831X_GPN_POL_SHIFT|1<<WM831X_GPN_TRI_SHIFT);
+ ret = wm831x_reg_read(wm831x, WM831X_GPIO1_CONTROL+i);
+ printk("Gpio%d Pin Configuration = %x\n",i,ret);
+ }
+#endif
+ return 0;
+}
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_WM831X_GPIO)
+static struct wm831x_gpio_keys_button wm831x_gpio_buttons[] = {
+{
+ .code = KEY_MEDIA,
+ .gpio = TCA6424_P21,
+ .active_low = 1,
+ .desc = "media",
+ .wakeup = 0,
+ .debounce_interval = 120,
+},
+{
+ .code= KEY_VOLUMEUP,
+ .gpio= WM831X_P05,
+ .active_low= 1,
+ .desc= "volume_up",
+ .wakeup= 0,
+},
+{
+ .code= KEY_CAMERA,
+ .gpio= WM831X_P06,
+ .active_low= 1,
+ .desc= "camera",
+ .wakeup= 0,
+},
+{
+ .code= KEY_VOLUMEDOWN,
+ .gpio= WM831X_P07,
+ .active_low= 1,
+ .desc= "volume_down",
+ .wakeup= 0,
+},
+{
+ .code= KEY_END,
+ .gpio= WM831X_P09,
+ .active_low= 1,
+ .desc= "enter",
+ .wakeup= 0,
+},
+{
+ .code= KEY_MENU,
+ .gpio= WM831X_P10,
+ .active_low= 1,
+ .desc= "menu",
+ .wakeup= 0,
+},
+{
+ .code= KEY_SEND,
+ .gpio= WM831X_P11,
+ .active_low= 1,
+ .desc= "esc",
+ .wakeup= 0,
+},
+{
+ .code= KEY_BACK,
+ .gpio= WM831X_P12,
+ .active_low= 1,
+ .desc= "home",
+ .wakeup= 0,
+},
+};
+
+struct wm831x_gpio_keys_pdata wm831x_gpio_keys_platdata = {
+ .buttons = wm831x_gpio_buttons,
+ .nbuttons = ARRAY_SIZE(wm831x_gpio_buttons),
+};
+
+#endif
+struct wm831x_pdata wm831x_platdata = {
+ /** Called before subdevices are set up */
+ .pre_init= wm831x_pre_init,
+ /** Called after subdevices are set up */
+ .post_init = wm831x_post_init,
+ /** Called before subdevices are power down */
+ .last_deinit = wm831x_last_deinit,
+
+#if defined(CONFIG_GPIO_WM831X)
+ .gpio_base=WM831X_GPIO_EXPANDER_BASE,
+ .gpio_pin_num=WM831X_TOTOL_GPIO_NUM,
+ .settinginfo=wm831x_gpio_settinginfo,
+ .settinginfolen=ARRAY_SIZE(wm831x_gpio_settinginfo),
+ .pin_type_init = wm831x_init_pin_type,
+ .irq_base= NR_AIC_IRQS + 7*NUM_GROUP,
+#endif
+
+ .backlight = &wm831x_backlight_platdata,
+
+ .backup = &wm831x_backup_platdata,
+
+ .battery = &wm831x_battery_platdata,
+ //.wm831x_touch_pdata = NULL,
+ //.watchdog = NULL,
+
+#if defined(CONFIG_KEYBOARD_WM831X_GPIO)
+ .gpio_keys = &wm831x_gpio_keys_platdata,
+#endif
+
+ /** LED1 = 0 and so on */
+ .status = {&wm831x_status_platdata[0], &wm831x_status_platdata[1]},
+
+ /** DCDC1 = 0 and so on */
+ .dcdc = {&wm831x_regulator_init_dcdc[0], &wm831x_regulator_init_dcdc[1], &wm831x_regulator_init_dcdc[2], &wm831x_regulator_init_dcdc[3]},
+
+ /** EPE1 = 0 and so on */
+ .epe = {&wm831x_regulator_init_epe[0], &wm831x_regulator_init_epe[1]},
+
+ /** LDO1 = 0 and so on */
+ .ldo = {&wm831x_regulator_init_ldo[0], &wm831x_regulator_init_ldo[1], &wm831x_regulator_init_ldo[2], &wm831x_regulator_init_ldo[3],
+ &wm831x_regulator_init_ldo[4], &wm831x_regulator_init_ldo[5], &wm831x_regulator_init_ldo[6], &wm831x_regulator_init_ldo[7],
+ &wm831x_regulator_init_ldo[8], &wm831x_regulator_init_ldo[9], &wm831x_regulator_init_ldo[10]},
+
+ /** ISINK1 = 0 and so on*/
+ .isink = {&wm831x_regulator_init_isink[0], &wm831x_regulator_init_isink[1]},
+};
+#endif
+
+
+
+#if defined(CONFIG_RK29_GPS)
+
+#define RK29_GPS_POWER_PIN RK29_PIN6_PB2
+#define RK29_GPS_RESET_PIN RK29_PIN6_PC1
+
+int rk29_gps_power_up(void)
+{
+ printk("%s \n", __FUNCTION__);
+
+ gpio_request(RK29_GPS_POWER_PIN, NULL);
+ gpio_direction_output(RK29_GPS_POWER_PIN, GPIO_HIGH);
+
+ return 0;
+}
+
+int rk29_gps_power_down(void)
+{
+ printk("%s \n", __FUNCTION__);
+
+ gpio_request(RK29_GPS_POWER_PIN, NULL);
+ gpio_direction_output(RK29_GPS_POWER_PIN, GPIO_LOW);
+
+ return 0;
+}
+
+int rk29_gps_reset_set(int level)
+{
+ gpio_request(RK29_GPS_RESET_PIN, NULL);
+ if (level)
+ gpio_direction_output(RK29_GPS_RESET_PIN, GPIO_HIGH);
+ else
+ gpio_direction_output(RK29_GPS_RESET_PIN, GPIO_LOW);
+
+ return 0;
+}
+
+struct rk29_gps_data rk29_gps_info = {
+ .power_up = rk29_gps_power_up,
+ .power_down = rk29_gps_power_down,
+ .reset = rk29_gps_reset_set,
+ .uart_id = 3,
+};
+
+struct platform_device rk29_device_gps = {
+ .name = "rk29_gps",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_gps_info,
+ }
+ };
+#endif
+
+/*****************************************************************************************
+ * wm8994 codec
+ * author: qjb@rock-chips.com
+ *****************************************************************************************/
+struct wm8994_pdata wm8994_platdata = {
+
+ .BB_input_diff = 1,
+ .BB_class = NO_PCM_BB,
+
+ .no_earpiece = 0,
+ .sp_hp_same_channel = 0,
+
+ .PA_control_pin = 0,
+ .Power_EN_Pin = RK29_PIN5_PA1,
+
+ .speaker_incall_vol = 12,
+ .speaker_incall_mic_vol = -9,
+ .speaker_normal_vol = 6,
+ .earpiece_incall_vol = 6,
+ .headset_incall_vol = 6,
+ .headset_incall_mic_vol = -6,
+ .headset_normal_vol = -6,
+ .BT_incall_vol = 0,
+ .BT_incall_mic_vol = 0,
+ .recorder_vol = 30,
+
+};
+
+
+#ifdef CONFIG_RK_HEADSET_DET
+#define HEADSET_GPIO RK29_PIN4_PD2
+struct rk_headset_pdata rk_headset_info = {
+ .Headset_gpio = RK29_PIN4_PD2,
+ .headset_in_type= HEADSET_IN_HIGH,
+ .Hook_gpio = RK29_PIN6_PB6,//Detection Headset--Must be set
+ .hook_key_code = KEY_MEDIA,
+};
+
+struct platform_device rk_device_headset = {
+ .name = "rk_headsetdet",
+ .id = 0,
+ .dev = {
+ .platform_data = &rk_headset_info,
+ }
+};
+#endif
+
+#if defined(CONFIG_GS_L3G4200D)
+
+#include <linux/l3g4200d.h>
+#define L3G4200D_INT_PIN RK29_PIN5_PA3
+
+static int l3g4200d_init_platform_hw(void)
+{
+ if (gpio_request(L3G4200D_INT_PIN, NULL) != 0) {
+ gpio_free(L3G4200D_INT_PIN);
+ printk("%s: request l3g4200d int pin error\n", __func__);
+ return -EIO;
+ }
+ gpio_pull_updown(L3G4200D_INT_PIN, 1);
+ return 0;
+}
+
+static struct l3g4200d_platform_data l3g4200d_info = {
+ .fs_range = 1,
+
+ .axis_map_x = 0,
+ .axis_map_y = 1,
+ .axis_map_z = 2,
+
+ .negate_x = 1,
+ .negate_y = 1,
+ .negate_z = 0,
+
+ .init = l3g4200d_init_platform_hw,
+};
+
+#endif
+
+/*****************************************************************************************
+ * i2c devices
+ * author: kfx@rock-chips.com
+*****************************************************************************************/
+static int rk29_i2c0_io_init(void)
+{
+#ifdef CONFIG_RK29_I2C0_CONTROLLER
+ rk29_mux_api_set(GPIO2B7_I2C0SCL_NAME, GPIO2L_I2C0_SCL);
+ rk29_mux_api_set(GPIO2B6_I2C0SDA_NAME, GPIO2L_I2C0_SDA);
+#else
+ rk29_mux_api_set(GPIO2B7_I2C0SCL_NAME, GPIO2L_GPIO2B7);
+ rk29_mux_api_set(GPIO2B6_I2C0SDA_NAME, GPIO2L_GPIO2B6);
+#endif
+ return 0;
+}
+
+static int rk29_i2c1_io_init(void)
+{
+#ifdef CONFIG_RK29_I2C1_CONTROLLER
+ rk29_mux_api_set(GPIO1A7_I2C1SCL_NAME, GPIO1L_I2C1_SCL);
+ rk29_mux_api_set(GPIO1A6_I2C1SDA_NAME, GPIO1L_I2C1_SDA);
+#else
+ rk29_mux_api_set(GPIO1A7_I2C1SCL_NAME, GPIO1L_GPIO1A7);
+ rk29_mux_api_set(GPIO1A6_I2C1SDA_NAME, GPIO1L_GPIO1A6);
+#endif
+ return 0;
+}
+static int rk29_i2c2_io_init(void)
+{
+#ifdef CONFIG_RK29_I2C2_CONTROLLER
+ rk29_mux_api_set(GPIO5D4_I2C2SCL_NAME, GPIO5H_I2C2_SCL);
+ rk29_mux_api_set(GPIO5D3_I2C2SDA_NAME, GPIO5H_I2C2_SDA);
+#else
+ rk29_mux_api_set(GPIO5D4_I2C2SCL_NAME, GPIO5H_GPIO5D4);
+ rk29_mux_api_set(GPIO5D3_I2C2SDA_NAME, GPIO5H_GPIO5D3);
+#endif
+ return 0;
+}
+
+static int rk29_i2c3_io_init(void)
+{
+#ifdef CONFIG_RK29_I2C3_CONTROLLER
+ rk29_mux_api_set(GPIO2B5_UART3RTSN_I2C3SCL_NAME, GPIO2L_I2C3_SCL);
+ rk29_mux_api_set(GPIO2B4_UART3CTSN_I2C3SDA_NAME, GPIO2L_I2C3_SDA);
+#else
+ rk29_mux_api_set(GPIO2B5_UART3RTSN_I2C3SCL_NAME, GPIO2L_GPIO2B5);
+ rk29_mux_api_set(GPIO2B4_UART3CTSN_I2C3SDA_NAME, GPIO2L_GPIO2B4);
+#endif
+ return 0;
+}
+#ifdef CONFIG_RK29_I2C0_CONTROLLER
+struct rk29_i2c_platform_data default_i2c0_data = {
+ .bus_num = 0,
+ .flags = 0,
+ .slave_addr = 0xff,
+ .scl_rate = 400*1000,
+ .mode = I2C_MODE_IRQ,
+ .io_init = rk29_i2c0_io_init,
+};
+#else
+struct i2c_gpio_platform_data default_i2c0_data = {
+ .sda_pin = RK29_PIN2_PB6,
+ .scl_pin = RK29_PIN2_PB7,
+ .udelay = 5, // clk = 500/udelay = 100Khz
+ .timeout = 100,//msecs_to_jiffies(200),
+ .bus_num = 0,
+ .io_init = rk29_i2c0_io_init,
+};
+#endif
+#ifdef CONFIG_RK29_I2C1_CONTROLLER
+struct rk29_i2c_platform_data default_i2c1_data = {
+ .bus_num = 1,
+ .flags = 0,
+ .slave_addr = 0xff,
+ .scl_rate = 400*1000,
+ .mode = I2C_MODE_IRQ,
+ .io_init = rk29_i2c1_io_init,
+};
+#else
+struct i2c_gpio_platform_data default_i2c1_data = {
+ .sda_pin = RK29_PIN1_PA6,
+ .scl_pin = RK29_PIN1_PA7,
+ .udelay = 5, // clk = 500/udelay = 100Khz
+ .timeout = 100,//msecs_to_jiffies(200),
+ .bus_num = 1,
+ .io_init = rk29_i2c1_io_init,
+};
+#endif
+#ifdef CONFIG_RK29_I2C2_CONTROLLER
+struct rk29_i2c_platform_data default_i2c2_data = {
+ .bus_num = 2,
+ .flags = 0,
+ .slave_addr = 0xff,
+ .scl_rate = 400*1000,
+ .mode = I2C_MODE_IRQ,
+ .io_init = rk29_i2c2_io_init,
+};
+#else
+struct i2c_gpio_platform_data default_i2c2_data = {
+ .sda_pin = RK29_PIN5_PD3,
+ .scl_pin = RK29_PIN5_PD4,
+ .udelay = 5, // clk = 500/udelay = 100Khz
+ .timeout = 100,//msecs_to_jiffies(200),
+ .bus_num = 2,
+ .io_init = rk29_i2c2_io_init,
+};
+#endif
+#ifdef CONFIG_RK29_I2C3_CONTROLLER
+struct rk29_i2c_platform_data default_i2c3_data = {
+ .bus_num = 3,
+ .flags = 0,
+ .slave_addr = 0xff,
+ .scl_rate = 400*1000,
+ .mode = I2C_MODE_IRQ,
+ .io_init = rk29_i2c3_io_init,
+};
+#else
+struct i2c_gpio_platform_data default_i2c3_data = {
+ .sda_pin = RK29_PIN5_PB5,
+ .scl_pin = RK29_PIN5_PB4,
+ .udelay = 5, // clk = 500/udelay = 100Khz
+ .timeout = 100,//msecs_to_jiffies(200),
+ .bus_num = 3,
+ .io_init = rk29_i2c3_io_init,
+};
+#endif
+#ifdef CONFIG_I2C0_RK29
+static struct i2c_board_info __initdata board_i2c0_devices[] = {
+#if defined (CONFIG_RK1000_CONTROL)
+ {
+ .type = "rk1000_control",
+ .addr = 0x40,
+ .flags = 0,
+ },
+#endif
+#if defined (CONFIG_SND_SOC_RK1000)
+ {
+ .type = "rk1000_i2c_codec",
+ .addr = 0x60,
+ .flags = 0,
+ },
+#endif
+#if defined (CONFIG_SND_SOC_WM8900)
+ {
+ .type = "wm8900",
+ .addr = 0x1A,
+ .flags = 0,
+ },
+#endif
+#if defined (CONFIG_SND_SOC_WM8994)
+ {
+ .type = "wm8994",
+ .addr = 0x1a,
+ .flags = 0,
+// #if defined(CONFIG_MFD_WM8994)
+ .platform_data = &wm8994_platdata,
+// #endif
+ },
+#endif
+#if defined (CONFIG_BATTERY_STC3100)
+ {
+ .type = "stc3100",
+ .addr = 0x70,
+ .flags = 0,
+ },
+#endif
+#if defined (CONFIG_BATTERY_BQ27510)
+ {
+ .type = "bq27510",
+ .addr = 0x55,
+ .flags = 0,
+ },
+#endif
+#if defined (CONFIG_RTC_HYM8563)
+ {
+ .type = "rtc_hym8563",
+ .addr = 0x51,
+ .flags = 0,
+ .irq = RK29_PIN0_PA1,
+ },
+#endif
+#if defined (CONFIG_GS_MMA8452)
+ {
+ .type = "gs_mma8452",
+ .addr = 0x1c,
+ .flags = 0,
+ .irq = MMA8452_INT_PIN,
+ .platform_data = &mma8452_info,
+ },
+#endif
+#if defined (CONFIG_GS_BMA023)
+ {
+ .type = "bma150",
+ .addr = 0x38,
+ .flags = 0,
+ .irq = BMA023_INT_PIN,
+ .platform_data = &bma023_info,
+ },
+#endif
+#if defined (CONFIG_COMPASS_AK8973)
+ {
+ .type = "ak8973",
+ .addr = 0x1d,
+ .flags = 0,
+ .irq = RK29_PIN6_PC5,
+ },
+#endif
+#if defined (CONFIG_COMPASS_AK8975)
+ {
+ .type = "ak8975",
+ .addr = 0x0d,
+ .flags = 0,
+ .irq = RK29_PIN6_PC5,
+ },
+#endif
+#if defined (CONFIG_INPUT_LPSENSOR_ISL29028)
+ {
+ .type = "isl29028",
+ .addr = 0x44,
+ .flags = 0,
+ .irq = RK29_PIN4_PD3,
+ },
+#endif
+#if defined (CONFIG_INPUT_LPSENSOR_AL3006)
+ {
+ .type = "al3006",
+ .addr = 0x1C, //sel = 0; if sel =1, then addr = 0x1D
+ .flags = 0,
+ .irq = RK29_PIN4_PD3,
+ },
+#endif
+#if defined (CONFIG_ANX7150)
+ {
+ .type = "anx7150",
+ .addr = 0x39, //0x39, 0x3d
+ .flags = 0,
+ .irq = RK29_PIN2_PA3,
+ },
+#endif
+#if defined (CONFIG_GS_L3G4200D)
+ {
+ .type = "gs_l3g4200d",
+ .addr = 0x69,
+ .flags = 0,
+ .irq = L3G4200D_INT_PIN,
+ .platform_data = &l3g4200d_info,
+ },
+#endif
+#if defined (CONFIG_MPU_SENSORS_MPU3050)
+ {
+ .type = "mpu3050",
+ .addr = 0x68,
+ .flags = 0,
+ .irq = RK29_PIN4_PC4,
+ .platform_data = &mpu3050_data,
+ },
+#endif
+};
+#endif
+
+#ifdef CONFIG_I2C1_RK29
+static struct i2c_board_info __initdata board_i2c1_devices[] = {
+#if defined (CONFIG_RK1000_CONTROL1)
+ {
+ .type = "rk1000_control",
+ .addr = 0x40,
+ .flags = 0,
+ },
+#endif
+#if defined (CONFIG_MFD_WM831X_I2C)
+ {
+ .type = "wm8310",
+ .addr = 0x34,
+ .flags = 0,
+ .irq = RK29_PIN4_PD0,
+ .platform_data = &wm831x_platdata,
+ },
+#endif
+
+};
+#endif
+
+#ifdef CONFIG_I2C2_RK29
+static struct i2c_board_info __initdata board_i2c2_devices[] = {
+#if defined (CONFIG_TOUCHSCREEN_GT801_IIC)
+{
+ .type = "gt801_ts",
+ .addr = 0x55,
+ .flags = 0,
+ .irq = RK29_PIN4_PD5,
+ .platform_data = >801_info,
+},
+#endif
+
+#if defined (CONFIG_TOUCHSCREEN_GT818_IIC)
+{
+ .type = "gt818_ts",
+ .addr = 0x5d,
+ .flags = 0,
+ .irq = RK29_PIN4_PD5,
+ .platform_data = >818_info,
+},
+#endif
+
+#if defined (CONFIG_TOUCHSCREEN_ILI2102_IIC)
+{
+ .type = "ili2102_ts",
+ .addr = 0x41,
+ .flags = I2C_M_NEED_DELAY,
+ .udelay = 600,
+ .irq = RK29_PIN4_PD5,
+ .platform_data = &ili2102_info,
+},
+#endif
+#if defined (CONFIG_HANNSTAR_P1003)
+ {
+ .type = "p1003_touch",
+ .addr = 0x04,
+ .flags = 0,
+ .irq = RK29_PIN0_PA2,
+ .platform_data = &p1003_info,
+ },
+#endif
+#if defined (CONFIG_EETI_EGALAX)
+ {
+ .type = "egalax_i2c",
+ .addr = 0x04,
+ .flags = 0,
+ .irq = RK29_PIN4_PD5,
+ .platform_data = &eeti_egalax_info,
+ },
+#endif
+#if defined (CONFIG_TOUCHSCREEN_PIXCIR)
+ {
+ .type = "pixcir_ts",
+ .addr = 0x5c,
+ .flags = 0,
+ .irq = RK29_PIN4_PD5,
+ .platform_data = &pixcir_info,
+ },
+#endif
+#if defined (CONFIG_TOUCHSCREEN_FT5X0X)
+ {
+ .type = "ft5x0x_ts",
+ .addr = (0x70>>1),
+ .flags = 0,
+ .irq = RK29_PIN4_PD5,
+ .platform_data = &ft5x0x_info,
+ },
+#endif
+};
+#endif
+
+#ifdef CONFIG_I2C3_RK29
+static struct i2c_board_info __initdata board_i2c3_devices[] = {
+ //I2c3 only for camera
+};
+#endif
+
+/*****************************************************************************************
+ * camera devices
+ * author: ddl@rock-chips.com
+ *****************************************************************************************/
+#ifdef CONFIG_VIDEO_RK29
+#define CONFIG_SENSOR_POWER_IOCTL_USR 0
+#define CONFIG_SENSOR_RESET_IOCTL_USR 0
+#define CONFIG_SENSOR_POWERDOWN_IOCTL_USR 0
+#define CONFIG_SENSOR_FLASH_IOCTL_USR 1
+
+#if CONFIG_SENSOR_POWER_IOCTL_USR
+static int sensor_power_usr_cb (struct rk29camera_gpio_res *res,int on)
+{
+ #error "CONFIG_SENSOR_POWER_IOCTL_USR is 1, sensor_power_usr_cb function must be writed!!";
+}
+#endif
+
+#if CONFIG_SENSOR_RESET_IOCTL_USR
+static int sensor_reset_usr_cb (struct rk29camera_gpio_res *res,int on)
+{
+ #error "CONFIG_SENSOR_RESET_IOCTL_USR is 1, sensor_reset_usr_cb function must be writed!!";
+}
+#endif
+
+#if CONFIG_SENSOR_POWERDOWN_IOCTL_USR
+static int sensor_powerdown_usr_cb (struct rk29camera_gpio_res *res,int on)
+{
+ #error "CONFIG_SENSOR_POWERDOWN_IOCTL_USR is 1, sensor_powerdown_usr_cb function must be writed!!";
+}
+#endif
+
+#if CONFIG_SENSOR_FLASH_IOCTL_USR
+static int sensor_flash_usr_cb (struct rk29camera_gpio_res *res,int on)
+{
+ //#error "CONFIG_SENSOR_FLASH_IOCTL_USR is 1, sensor_flash_usr_cb function must be writed!!";
+ int ret;
+ ret = gpio_request(RK29_PIN0_PD1, NULL);
+ if(ret != 0)
+ {
+ gpio_free(RK29_PIN0_PD1);
+ printk("sensor_flash_usr_cb error!!\n");
+ return 0;
+ }
+ ret = gpio_request(RK29_PIN6_PB5, NULL);
+ if(ret != 0)
+ {
+ gpio_free(RK29_PIN6_PB5);
+ printk("sensor_flash_usr_cb error!!\n");
+ return 0;
+ }
+ if(on) {
+ gpio_direction_output(RK29_PIN0_PD1, GPIO_HIGH);
+ gpio_set_value(RK29_PIN0_PD1, 1);
+
+ gpio_direction_output(RK29_PIN6_PB5, GPIO_HIGH);
+ gpio_set_value(RK29_PIN6_PB5, 1);
+ }
+ else
+ {
+ gpio_direction_output(RK29_PIN0_PD1, GPIO_HIGH);
+ gpio_set_value(RK29_PIN0_PD1, 0);
+
+ gpio_direction_output(RK29_PIN6_PB5, GPIO_HIGH);
+ gpio_set_value(RK29_PIN6_PB5, 0);
+ }
+ gpio_free(RK29_PIN0_PD1);
+ gpio_free(RK29_PIN6_PB5);
+ return 0;
+}
+#endif
+
+static struct rk29camera_platform_ioctl_cb sensor_ioctl_cb = {
+ #if CONFIG_SENSOR_POWER_IOCTL_USR
+ .sensor_power_cb = sensor_power_usr_cb,
+ #else
+ .sensor_power_cb = NULL,
+ #endif
+
+ #if CONFIG_SENSOR_RESET_IOCTL_USR
+ .sensor_reset_cb = sensor_reset_usr_cb,
+ #else
+ .sensor_reset_cb = NULL,
+ #endif
+
+ #if CONFIG_SENSOR_POWERDOWN_IOCTL_USR
+ .sensor_powerdown_cb = sensor_powerdown_usr_cb,
+ #else
+ .sensor_powerdown_cb = NULL,
+ #endif
+
+ #if CONFIG_SENSOR_FLASH_IOCTL_USR
+ .sensor_flash_cb = sensor_flash_usr_cb,
+ #else
+ .sensor_flash_cb = NULL,
+ #endif
+};
+#include "../../../drivers/media/video/rk29_camera.c"
+#endif
+
+/*****************************************************************************************
+ * backlight devices
+ * author: nzy@rock-chips.com
+ *****************************************************************************************/
+#ifdef CONFIG_BACKLIGHT_RK29_BL
+ /*
+ GPIO1B5_PWM0_NAME, GPIO1L_PWM0
+ GPIO5D2_PWM1_UART1SIRIN_NAME, GPIO5H_PWM1
+ GPIO2A3_SDMMC0WRITEPRT_PWM2_NAME, GPIO2L_PWM2
+ GPIO1A5_EMMCPWREN_PWM3_NAME, GPIO1L_PWM3
+ */
+
+#define PWM_ID 0
+#define PWM_MUX_NAME GPIO1B5_PWM0_NAME
+#define PWM_MUX_MODE GPIO1L_PWM0
+#define PWM_MUX_MODE_GPIO GPIO1L_GPIO1B5
+#define PWM_EFFECT_VALUE 1
+
+//#define LCD_DISP_ON_PIN
+
+#ifdef LCD_DISP_ON_PIN
+#define BL_EN_MUX_NAME GPIOF34_UART3_SEL_NAME
+#define BL_EN_MUX_MODE IOMUXB_GPIO1_B34
+
+#define BL_EN_PIN GPIO0L_GPIO0A5
+#define BL_EN_VALUE GPIO_HIGH
+#endif
+static int rk29_backlight_io_init(void)
+{
+ int ret = 0;
+
+ rk29_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE);
+ #ifdef LCD_DISP_ON_PIN
+ rk29_mux_api_set(BL_EN_MUX_NAME, BL_EN_MUX_MODE);
+
+ ret = gpio_request(BL_EN_PIN, NULL);
+ if(ret != 0)
+ {
+ gpio_free(BL_EN_PIN);
+ }
+
+ gpio_direction_output(BL_EN_PIN, 0);
+ gpio_set_value(BL_EN_PIN, BL_EN_VALUE);
+ #endif
+ return ret;
+}
+
+static int rk29_backlight_io_deinit(void)
+{
+ int ret = 0;
+ #ifdef LCD_DISP_ON_PIN
+ gpio_free(BL_EN_PIN);
+ #endif
+ rk29_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO);
+ return ret;
+}
+struct rk29_bl_info rk29_bl_info = {
+ .pwm_id = PWM_ID,
+ .bl_ref = PWM_EFFECT_VALUE,
+ .io_init = rk29_backlight_io_init,
+ .io_deinit = rk29_backlight_io_deinit,
+};
+#endif
+/*****************************************************************************************
+* pwm voltage regulator devices
+******************************************************************************************/
+#if defined (CONFIG_RK29_PWM_REGULATOR)
+
+#define REGULATOR_PWM_ID 2
+#define REGULATOR_PWM_MUX_NAME GPIO2A3_SDMMC0WRITEPRT_PWM2_NAME
+#define REGULATOR_PWM_MUX_MODE GPIO2L_PWM2
+#define REGULATOR_PWM_MUX_MODE_GPIO GPIO2L_GPIO2A3
+#define REGULATOR_PWM_GPIO RK29_PIN2_PA3
+
+static struct regulator_consumer_supply pwm_consumers[] = {
+ {
+ .supply = "vcore",
+ }
+};
+
+static struct regulator_init_data rk29_pwm_regulator_data = {
+ .constraints = {
+ .name = "PWM2",
+ .min_uV = 950000,
+ .max_uV = 1400000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(pwm_consumers),
+ .consumer_supplies = pwm_consumers,
+};
+
+static struct pwm_platform_data rk29_regulator_pwm_platform_data = {
+ .pwm_id = REGULATOR_PWM_ID,
+ .pwm_gpio = REGULATOR_PWM_GPIO,
+ //.pwm_iomux_name[] = REGULATOR_PWM_MUX_NAME;
+ .pwm_iomux_name = REGULATOR_PWM_MUX_NAME,
+ .pwm_iomux_pwm = REGULATOR_PWM_MUX_MODE,
+ .pwm_iomux_gpio = REGULATOR_PWM_MUX_MODE_GPIO,
+ .init_data = &rk29_pwm_regulator_data,
+};
+
+static struct platform_device rk29_device_pwm_regulator = {
+ .name = "pwm-voltage-regulator",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_regulator_pwm_platform_data,
+ },
+};
+
+#endif
+#define POWER_ON_PIN RK29_PIN4_PA4
+#define BP_VOL_PIN RK29_PIN6_PD3
+
+#if defined(CONFIG_TDSC8800)
+
+static int tdsc8800_io_init(void)
+{
+
+ return 0;
+}
+
+static int tdsc8800_io_deinit(void)
+{
+
+ return 0;
+}
+
+struct rk2818_23d_data rk29_tdsc8800_info = {
+ .io_init = tdsc8800_io_init,
+ .io_deinit = tdsc8800_io_deinit,
+ .bp_power = BP_VOL_PIN,
+ .bp_power_active_low = 1,
+};
+struct platform_device rk29_device_tdsc8800 = {
+ .name = "tdsc8800",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_tdsc8800_info,
+ }
+ };
+#endif
+
+
+/*****************************************************************************************
+ * SDMMC devices
+*****************************************************************************************/
+#if !defined(CONFIG_SDMMC_RK29_OLD)
+static void rk29_sdmmc_gpio_open(int device_id, int on)
+{
+ switch(device_id)
+ {
+ case 0://mmc0
+ {
+ #ifdef CONFIG_SDMMC0_RK29
+ if(on)
+ {
+ gpio_direction_output(RK29_PIN1_PD0,GPIO_HIGH);//set mmc0-clk to high
+ gpio_direction_output(RK29_PIN1_PD1,GPIO_HIGH);//set mmc0-cmd to high.
+ gpio_direction_output(RK29_PIN1_PD2,GPIO_HIGH);//set mmc0-data0 to high.
+ gpio_direction_output(RK29_PIN1_PD3,GPIO_HIGH);//set mmc0-data1 to high.
+ gpio_direction_output(RK29_PIN1_PD4,GPIO_HIGH);//set mmc0-data2 to high.
+ gpio_direction_output(RK29_PIN1_PD5,GPIO_HIGH);//set mmc0-data3 to high.
+
+ mdelay(30);
+ }
+ else
+ {
+ rk29_mux_api_set(GPIO1D0_SDMMC0CLKOUT_NAME, GPIO1H_GPIO1_D0);
+ gpio_request(RK29_PIN1_PD0, "mmc0-clk");
+ gpio_direction_output(RK29_PIN1_PD0,GPIO_LOW);//set mmc0-clk to low.
+
+ rk29_mux_api_set(GPIO1D1_SDMMC0CMD_NAME, GPIO1H_GPIO1_D1);
+ gpio_request(RK29_PIN1_PD1, "mmc0-cmd");
+ gpio_direction_output(RK29_PIN1_PD1,GPIO_LOW);//set mmc0-cmd to low.
+
+ rk29_mux_api_set(GPIO1D2_SDMMC0DATA0_NAME, GPIO1H_GPIO1D2);
+ gpio_request(RK29_PIN1_PD2, "mmc0-data0");
+ gpio_direction_output(RK29_PIN1_PD2,GPIO_LOW);//set mmc0-data0 to low.
+
+ rk29_mux_api_set(GPIO1D3_SDMMC0DATA1_NAME, GPIO1H_GPIO1D3);
+ gpio_request(RK29_PIN1_PD3, "mmc0-data1");
+ gpio_direction_output(RK29_PIN1_PD3,GPIO_LOW);//set mmc0-data1 to low.
+
+ rk29_mux_api_set(GPIO1D4_SDMMC0DATA2_NAME, GPIO1H_GPIO1D4);
+ gpio_request(RK29_PIN1_PD4, "mmc0-data2");
+ gpio_direction_output(RK29_PIN1_PD4,GPIO_LOW);//set mmc0-data2 to low.
+
+ rk29_mux_api_set(GPIO1D5_SDMMC0DATA3_NAME, GPIO1H_GPIO1D5);
+ gpio_request(RK29_PIN1_PD5, "mmc0-data3");
+ gpio_direction_output(RK29_PIN1_PD5,GPIO_LOW);//set mmc0-data3 to low.
+
+ mdelay(30);
+ }
+ #endif
+ }
+ break;
+
+ case 1://mmc1
+ {
+ #ifdef CONFIG_SDMMC1_RK29
+ if(on)
+ {
+ gpio_direction_output(RK29_PIN1_PC7,GPIO_HIGH);//set mmc1-clk to high
+ gpio_direction_output(RK29_PIN1_PC2,GPIO_HIGH);//set mmc1-cmd to high.
+ gpio_direction_output(RK29_PIN1_PC3,GPIO_HIGH);//set mmc1-data0 to high.
+ gpio_direction_output(RK29_PIN1_PC4,GPIO_HIGH);//set mmc1-data1 to high.
+ gpio_direction_output(RK29_PIN1_PC5,GPIO_HIGH);//set mmc1-data2 to high.
+ gpio_direction_output(RK29_PIN1_PC6,GPIO_HIGH);//set mmc1-data3 to high.
+ mdelay(100);
+ }
+ else
+ {
+ rk29_mux_api_set(GPIO1C7_SDMMC1CLKOUT_NAME, GPIO1H_GPIO1C7);
+ gpio_request(RK29_PIN1_PC7, "mmc1-clk");
+ gpio_direction_output(RK29_PIN1_PC7,GPIO_LOW);//set mmc1-clk to low.
+
+ rk29_mux_api_set(GPIO1C2_SDMMC1CMD_NAME, GPIO1H_GPIO1C2);
+ gpio_request(RK29_PIN1_PC2, "mmc1-cmd");
+ gpio_direction_output(RK29_PIN1_PC2,GPIO_LOW);//set mmc1-cmd to low.
+
+ rk29_mux_api_set(GPIO1C3_SDMMC1DATA0_NAME, GPIO1H_GPIO1C3);
+ gpio_request(RK29_PIN1_PC3, "mmc1-data0");
+ gpio_direction_output(RK29_PIN1_PC3,GPIO_LOW);//set mmc1-data0 to low.
+
+ mdelay(100);
+ }
+ #endif
+ }
+ break;
+
+ case 2: //mmc2
+ break;
+
+ default:
+ break;
+ }
+}
+
+
+static void rk29_sdmmc_set_iomux_mmc0(unsigned int bus_width)
+{
+ switch (bus_width)
+ {
+
+ case 1://SDMMC_CTYPE_4BIT:
+ {
+ rk29_mux_api_set(GPIO1D3_SDMMC0DATA1_NAME, GPIO1H_SDMMC0_DATA1);
+ rk29_mux_api_set(GPIO1D4_SDMMC0DATA2_NAME, GPIO1H_SDMMC0_DATA2);
+ rk29_mux_api_set(GPIO1D5_SDMMC0DATA3_NAME, GPIO1H_SDMMC0_DATA3);
+ }
+ break;
+
+ case 0x10000://SDMMC_CTYPE_8BIT:
+ break;
+ case 0xFFFF: //gpio_reset
+ {
+ rk29_mux_api_set(GPIO5D5_SDMMC0PWREN_NAME, GPIO5H_GPIO5D5);
+ gpio_request(RK29_PIN5_PD5,"sdmmc-power");
+ gpio_direction_output(RK29_PIN5_PD5,GPIO_HIGH); //power-off
+
+ rk29_sdmmc_gpio_open(0, 0);
+
+ gpio_direction_output(RK29_PIN5_PD5,GPIO_LOW); //power-on
+
+ rk29_sdmmc_gpio_open(0, 1);
+ }
+ break;
+
+ default: //case 0://SDMMC_CTYPE_1BIT:
+ {
+ rk29_mux_api_set(GPIO1D1_SDMMC0CMD_NAME, GPIO1H_SDMMC0_CMD);
+ rk29_mux_api_set(GPIO1D0_SDMMC0CLKOUT_NAME, GPIO1H_SDMMC0_CLKOUT);
+ rk29_mux_api_set(GPIO1D2_SDMMC0DATA0_NAME, GPIO1H_SDMMC0_DATA0);
+
+ rk29_mux_api_set(GPIO1D3_SDMMC0DATA1_NAME, GPIO1H_GPIO1D3);
+ gpio_request(RK29_PIN1_PD3, "mmc0-data1");
+ gpio_direction_output(RK29_PIN1_PD3,GPIO_HIGH);
+
+ rk29_mux_api_set(GPIO1D4_SDMMC0DATA2_NAME, GPIO1H_GPIO1D4);
+ gpio_request(RK29_PIN1_PD4, "mmc0-data2");
+ gpio_direction_output(RK29_PIN1_PD4,GPIO_HIGH);
+
+ rk29_mux_api_set(GPIO1D5_SDMMC0DATA3_NAME, GPIO1H_GPIO1D5);
+ gpio_request(RK29_PIN1_PD5, "mmc0-data3");
+ gpio_direction_output(RK29_PIN1_PD5,GPIO_HIGH);
+ }
+ break;
+ }
+}
+
+static void rk29_sdmmc_set_iomux_mmc1(unsigned int bus_width)
+{
+#if 0
+ switch (bus_width)
+ {
+
+ case 1://SDMMC_CTYPE_4BIT:
+ {
+ rk29_mux_api_set(GPIO1C2_SDMMC1CMD_NAME, GPIO1H_SDMMC1_CMD);
+ rk29_mux_api_set(GPIO1C7_SDMMC1CLKOUT_NAME, GPIO1H_SDMMC1_CLKOUT);
+ rk29_mux_api_set(GPIO1C3_SDMMC1DATA0_NAME, GPIO1H_SDMMC1_DATA0);
+ rk29_mux_api_set(GPIO1C4_SDMMC1DATA1_NAME, GPIO1H_SDMMC1_DATA1);
+ rk29_mux_api_set(GPIO1C5_SDMMC1DATA2_NAME, GPIO1H_SDMMC1_DATA2);
+ rk29_mux_api_set(GPIO1C6_SDMMC1DATA3_NAME, GPIO1H_SDMMC1_DATA3);
+ }
+ break;
+
+ case 0x10000://SDMMC_CTYPE_8BIT:
+ break;
+ case 0xFFFF:
+ {
+ rk29_sdmmc_gpio_open(1, 0);
+ rk29_sdmmc_gpio_open(1, 1);
+ }
+ break;
+
+ default: //case 0://SDMMC_CTYPE_1BIT:
+ {
+ rk29_mux_api_set(GPIO1C2_SDMMC1CMD_NAME, GPIO1H_SDMMC1_CMD);
+ rk29_mux_api_set(GPIO1C7_SDMMC1CLKOUT_NAME, GPIO1H_SDMMC1_CLKOUT);
+ rk29_mux_api_set(GPIO1C3_SDMMC1DATA0_NAME, GPIO1H_SDMMC1_DATA0);
+
+ rk29_mux_api_set(GPIO1C4_SDMMC1DATA1_NAME, GPIO1H_GPIO1C4);
+ gpio_request(RK29_PIN1_PC4, "mmc1-data1");
+ gpio_direction_output(RK29_PIN1_PC4,GPIO_HIGH);
+
+ rk29_mux_api_set(GPIO1C5_SDMMC1DATA2_NAME, GPIO1H_GPIO1C5);
+ gpio_request(RK29_PIN1_PC5, "mmc1-data2");
+ gpio_direction_output(RK29_PIN1_PC5,GPIO_HIGH);
+
+ rk29_mux_api_set(GPIO1C6_SDMMC1DATA3_NAME, GPIO1H_GPIO1C6);
+ gpio_request(RK29_PIN1_PC6, "mmc1-data3");
+ gpio_direction_output(RK29_PIN1_PC6,GPIO_HIGH);
+
+ }
+ break;
+ }
+#else
+ rk29_mux_api_set(GPIO1C2_SDMMC1CMD_NAME, GPIO1H_SDMMC1_CMD);
+ rk29_mux_api_set(GPIO1C7_SDMMC1CLKOUT_NAME, GPIO1H_SDMMC1_CLKOUT);
+ rk29_mux_api_set(GPIO1C3_SDMMC1DATA0_NAME, GPIO1H_SDMMC1_DATA0);
+ rk29_mux_api_set(GPIO1C4_SDMMC1DATA1_NAME, GPIO1H_SDMMC1_DATA1);
+ rk29_mux_api_set(GPIO1C5_SDMMC1DATA2_NAME, GPIO1H_SDMMC1_DATA2);
+ rk29_mux_api_set(GPIO1C6_SDMMC1DATA3_NAME, GPIO1H_SDMMC1_DATA3);
+
+#endif
+}
+
+static void rk29_sdmmc_set_iomux_mmc2(unsigned int bus_width)
+{
+ ;//
+}
+
+static void rk29_sdmmc_set_iomux(int device_id, unsigned int bus_width)
+{
+ switch(device_id)
+ {
+ case 0:
+ #ifdef CONFIG_SDMMC0_RK29
+ rk29_sdmmc_set_iomux_mmc0(bus_width);
+ #endif
+ break;
+ case 1:
+ #ifdef CONFIG_SDMMC1_RK29
+ rk29_sdmmc_set_iomux_mmc1(bus_width);
+ #endif
+ break;
+ case 2:
+ rk29_sdmmc_set_iomux_mmc2(bus_width);
+ break;
+ default:
+ break;
+ }
+}
+#endif
+#ifdef CONFIG_SDMMC0_RK29
+static int rk29_sdmmc0_cfg_gpio(void)
+{
+ rk29_mux_api_set(GPIO1D1_SDMMC0CMD_NAME, GPIO1H_SDMMC0_CMD);
+ rk29_mux_api_set(GPIO1D0_SDMMC0CLKOUT_NAME, GPIO1H_SDMMC0_CLKOUT);
+ rk29_mux_api_set(GPIO1D2_SDMMC0DATA0_NAME, GPIO1H_SDMMC0_DATA0);
+ rk29_mux_api_set(GPIO1D3_SDMMC0DATA1_NAME, GPIO1H_SDMMC0_DATA1);
+ rk29_mux_api_set(GPIO1D4_SDMMC0DATA2_NAME, GPIO1H_SDMMC0_DATA2);
+ rk29_mux_api_set(GPIO1D5_SDMMC0DATA3_NAME, GPIO1H_SDMMC0_DATA3);
+#ifdef CONFIG_SDMMC_RK29_OLD
+ rk29_mux_api_set(GPIO2A2_SDMMC0DETECTN_NAME, GPIO2L_GPIO2A2);
+#else
+ rk29_mux_api_set(GPIO2A2_SDMMC0DETECTN_NAME, GPIO2L_SDMMC0_DETECT_N);//Modifyed by xbw.
+#endif
+ rk29_mux_api_set(GPIO5D5_SDMMC0PWREN_NAME, GPIO5H_GPIO5D5); ///GPIO5H_SDMMC0_PWR_EN); ///GPIO5H_GPIO5D5);
+ gpio_request(RK29_PIN5_PD5,"sdmmc");
+ gpio_set_value(RK29_PIN5_PD5,GPIO_HIGH);
+ mdelay(100);
+ gpio_set_value(RK29_PIN5_PD5,GPIO_LOW);
+ return 0;
+}
+
+#define CONFIG_SDMMC0_USE_DMA
+struct rk29_sdmmc_platform_data default_sdmmc0_data = {
+ .host_ocr_avail = (MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
+ MMC_VDD_30_31|MMC_VDD_31_32|MMC_VDD_32_33|
+ MMC_VDD_33_34|MMC_VDD_34_35| MMC_VDD_35_36),
+ .host_caps = (MMC_CAP_4_BIT_DATA|MMC_CAP_MMC_HIGHSPEED|MMC_CAP_SD_HIGHSPEED),
+ .io_init = rk29_sdmmc0_cfg_gpio,
+ .dma_name = "sd_mmc",
+#ifdef CONFIG_SDMMC0_USE_DMA
+ .use_dma = 1,
+#else
+ .use_dma = 0,
+#endif
+#if !defined(CONFIG_SDMMC_RK29_OLD)
+ .set_iomux = rk29_sdmmc_set_iomux,
+#endif
+
+// .detect_irq = RK29_PIN2_PA2, // INVALID_GPIO
+ .detect_irq = INVALID_GPIO,
+ .enable_sd_wakeup = 0,
+};
+#endif
+#ifdef CONFIG_SDMMC1_RK29
+#define CONFIG_SDMMC1_USE_DMA
+static int rk29_sdmmc1_cfg_gpio(void)
+{
+ rk29_mux_api_set(GPIO1C2_SDMMC1CMD_NAME, GPIO1H_SDMMC1_CMD);
+ rk29_mux_api_set(GPIO1C7_SDMMC1CLKOUT_NAME, GPIO1H_SDMMC1_CLKOUT);
+ rk29_mux_api_set(GPIO1C3_SDMMC1DATA0_NAME, GPIO1H_SDMMC1_DATA0);
+ rk29_mux_api_set(GPIO1C4_SDMMC1DATA1_NAME, GPIO1H_SDMMC1_DATA1);
+ rk29_mux_api_set(GPIO1C5_SDMMC1DATA2_NAME, GPIO1H_SDMMC1_DATA2);
+ rk29_mux_api_set(GPIO1C6_SDMMC1DATA3_NAME, GPIO1H_SDMMC1_DATA3);
+ //rk29_mux_api_set(GPIO1C0_UART0CTSN_SDMMC1DETECTN_NAME, GPIO1H_SDMMC1_DETECT_N);
+ return 0;
+}
+
+#ifdef CONFIG_WIFI_CONTROL_FUNC
+static int rk29sdk_wifi_status(struct device *dev);
+static int rk29sdk_wifi_status_register(void (*callback)(int card_presend, void *dev_id), void *dev_id);
+#endif
+
+#define RK29SDK_WIFI_SDIO_CARD_DETECT_N RK29_PIN1_PD6
+
+struct rk29_sdmmc_platform_data default_sdmmc1_data = {
+ .host_ocr_avail = (MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28|MMC_VDD_28_29|
+ MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32|
+ MMC_VDD_32_33|MMC_VDD_33_34),
+ .host_caps = (MMC_CAP_4_BIT_DATA|MMC_CAP_SDIO_IRQ|
+ MMC_CAP_MMC_HIGHSPEED|MMC_CAP_SD_HIGHSPEED),
+ .io_init = rk29_sdmmc1_cfg_gpio,
+ .dma_name = "sdio",
+#ifdef CONFIG_SDMMC1_USE_DMA
+ .use_dma = 1,
+#else
+ .use_dma = 0,
+#endif
+#ifdef CONFIG_WIFI_CONTROL_FUNC
+ .status = rk29sdk_wifi_status,
+ .register_status_notify = rk29sdk_wifi_status_register,
+#endif
+#if 0
+ .detect_irq = RK29SDK_WIFI_SDIO_CARD_DETECT_N,
+#endif
+#if !defined(CONFIG_SDMMC_RK29_OLD)
+ .set_iomux = rk29_sdmmc_set_iomux,
+#endif
+};
+#endif
+
+#ifdef CONFIG_WIFI_CONTROL_FUNC
+#define RK29SDK_WIFI_BT_GPIO_POWER_N RK29_PIN5_PD6
+#define RK29SDK_WIFI_GPIO_RESET_N RK29_PIN6_PC0
+#define RK29SDK_BT_GPIO_RESET_N RK29_PIN6_PC7
+
+static int rk29sdk_wifi_cd = 0; /* wifi virtual 'card detect' status */
+static void (*wifi_status_cb)(int card_present, void *dev_id);
+static void *wifi_status_cb_devid;
+int rk29sdk_wifi_power_state = 0;
+int rk29sdk_bt_power_state = 0;
+
+static int rk29sdk_wifi_status(struct device *dev)
+{
+ return rk29sdk_wifi_cd;
+}
+
+static int rk29sdk_wifi_status_register(void (*callback)(int card_present, void *dev_id), void *dev_id)
+{
+ if(wifi_status_cb)
+ return -EAGAIN;
+ wifi_status_cb = callback;
+ wifi_status_cb_devid = dev_id;
+ return 0;
+}
+
+static int rk29sdk_wifi_bt_gpio_control_init(void)
+{
+ if (gpio_request(RK29SDK_WIFI_BT_GPIO_POWER_N, "wifi_bt_power")) {
+ pr_info("%s: request wifi_bt power gpio failed\n", __func__);
+ return -1;
+ }
+
+ if (gpio_request(RK29SDK_WIFI_GPIO_RESET_N, "wifi reset")) {
+ pr_info("%s: request wifi reset gpio failed\n", __func__);
+ gpio_free(RK29SDK_WIFI_BT_GPIO_POWER_N);
+ return -1;
+ }
+
+ if (gpio_request(RK29SDK_BT_GPIO_RESET_N, "bt reset")) {
+ pr_info("%s: request bt reset gpio failed\n", __func__);
+ gpio_free(RK29SDK_WIFI_GPIO_RESET_N);
+ return -1;
+ }
+
+ gpio_direction_output(RK29SDK_WIFI_BT_GPIO_POWER_N, GPIO_LOW);
+ gpio_direction_output(RK29SDK_WIFI_GPIO_RESET_N, GPIO_LOW);
+ gpio_direction_output(RK29SDK_BT_GPIO_RESET_N, GPIO_LOW);
+
+ pr_info("%s: init finished\n",__func__);
+
+ return 0;
+}
+
+static int rk29sdk_wifi_power(int on)
+{
+ pr_info("%s: %d\n", __func__, on);
+ if (on){
+ gpio_set_value(RK29SDK_WIFI_BT_GPIO_POWER_N, GPIO_HIGH);
+ gpio_set_value(RK29SDK_WIFI_GPIO_RESET_N, GPIO_HIGH);
+ mdelay(100);
+ pr_info("wifi turn on power\n");
+ }else{
+ if (!rk29sdk_bt_power_state){
+ gpio_set_value(RK29SDK_WIFI_BT_GPIO_POWER_N, GPIO_LOW);
+ mdelay(100);
+ pr_info("wifi shut off power\n");
+ }else
+ {
+ pr_info("wifi shouldn't shut off power, bt is using it!\n");
+ }
+ gpio_set_value(RK29SDK_WIFI_GPIO_RESET_N, GPIO_LOW);
+
+ }
+
+ rk29sdk_wifi_power_state = on;
+ return 0;
+}
+
+static int rk29sdk_wifi_reset_state;
+static int rk29sdk_wifi_reset(int on)
+{
+ pr_info("%s: %d\n", __func__, on);
+ gpio_set_value(RK29SDK_WIFI_GPIO_RESET_N, on);
+ mdelay(100);
+ rk29sdk_wifi_reset_state = on;
+ return 0;
+}
+
+int rk29sdk_wifi_set_carddetect(int val)
+{
+ pr_info("%s:%d\n", __func__, val);
+ rk29sdk_wifi_cd = val;
+ if (wifi_status_cb){
+ wifi_status_cb(val, wifi_status_cb_devid);
+ }else {
+ pr_warning("%s, nobody to notify\n", __func__);
+ }
+ return 0;
+}
+EXPORT_SYMBOL(rk29sdk_wifi_set_carddetect);
+
+static struct wifi_mem_prealloc wifi_mem_array[PREALLOC_WLAN_SEC_NUM] = {
+ {NULL, (WLAN_SECTION_SIZE_0 + PREALLOC_WLAN_SECTION_HEADER)},
+ {NULL, (WLAN_SECTION_SIZE_1 + PREALLOC_WLAN_SECTION_HEADER)},
+ {NULL, (WLAN_SECTION_SIZE_2 + PREALLOC_WLAN_SECTION_HEADER)},
+ {NULL, (WLAN_SECTION_SIZE_3 + PREALLOC_WLAN_SECTION_HEADER)}
+};
+
+static void *rk29sdk_mem_prealloc(int section, unsigned long size)
+{
+ if (section == PREALLOC_WLAN_SEC_NUM)
+ return wlan_static_skb;
+
+ if ((section < 0) || (section > PREALLOC_WLAN_SEC_NUM))
+ return NULL;
+
+ if (wifi_mem_array[section].size < size)
+ return NULL;
+
+ return wifi_mem_array[section].mem_ptr;
+}
+
+int __init rk29sdk_init_wifi_mem(void)
+{
+ int i;
+ int j;
+
+ for (i = 0 ; i < WLAN_SKB_BUF_NUM ; i++) {
+ wlan_static_skb[i] = dev_alloc_skb(
+ ((i < (WLAN_SKB_BUF_NUM / 2)) ? 4096 : 8192));
+
+ if (!wlan_static_skb[i])
+ goto err_skb_alloc;
+ }
+
+ for (i = 0 ; i < PREALLOC_WLAN_SEC_NUM ; i++) {
+ wifi_mem_array[i].mem_ptr =
+ kmalloc(wifi_mem_array[i].size, GFP_KERNEL);
+
+ if (!wifi_mem_array[i].mem_ptr)
+ goto err_mem_alloc;
+ }
+ return 0;
+
+ err_mem_alloc:
+ pr_err("Failed to mem_alloc for WLAN\n");
+ for (j = 0 ; j < i ; j++)
+ kfree(wifi_mem_array[j].mem_ptr);
+
+ i = WLAN_SKB_BUF_NUM;
+
+ err_skb_alloc:
+ pr_err("Failed to skb_alloc for WLAN\n");
+ for (j = 0 ; j < i ; j++)
+ dev_kfree_skb(wlan_static_skb[j]);
+
+ return -ENOMEM;
+}
+
+static struct wifi_platform_data rk29sdk_wifi_control = {
+ .set_power = rk29sdk_wifi_power,
+ .set_reset = rk29sdk_wifi_reset,
+ .set_carddetect = rk29sdk_wifi_set_carddetect,
+ .mem_prealloc = rk29sdk_mem_prealloc,
+};
+static struct platform_device rk29sdk_wifi_device = {
+ .name = "bcm4329_wlan",
+ .id = 1,
+ .dev = {
+ .platform_data = &rk29sdk_wifi_control,
+ },
+};
+#endif
+
+
+/* bluetooth rfkill device */
+static struct platform_device rk29sdk_rfkill = {
+ .name = "rk29sdk_rfkill",
+ .id = -1,
+};
+
+
+#ifdef CONFIG_VIVANTE
+static struct resource resources_gpu[] = {
+ [0] = {
+ .name = "gpu_irq",
+ .start = IRQ_GPU,
+ .end = IRQ_GPU,
+ .flags = IORESOURCE_IRQ,
+ },
+ [1] = {
+ .name = "gpu_base",
+ .start = RK29_GPU_PHYS,
+ .end = RK29_GPU_PHYS + RK29_GPU_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .name = "gpu_mem",
+ .start = PMEM_GPU_BASE,
+ .end = PMEM_GPU_BASE + PMEM_GPU_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+static struct platform_device rk29_device_gpu = {
+ .name = "galcore",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(resources_gpu),
+ .resource = resources_gpu,
+};
+#endif
+#ifdef CONFIG_KEYS_RK29
+extern struct rk29_keys_platform_data rk29_keys_pdata;
+static struct platform_device rk29_device_keys = {
+ .name = "rk29-keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_keys_pdata,
+ },
+};
+#endif
+
+#ifdef CONFIG_USE_GPIO_GENERATE_WAVE
+static struct gpio_wave_platform_data gpio_wave_pdata = {
+ .gpio = RK29_PIN0_PA0,
+ .Htime = 2000,
+ .Ltime = 300,
+ .Dvalue = GPIO_HIGH,
+};
+static struct platform_device gpio_wave_device = {
+ .name = "gpio_wave",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_wave_pdata,
+ },
+};
+#endif
+#if CONFIG_ANDROID_TIMED_GPIO
+static struct timed_gpio timed_gpios[] = {
+ {
+ .name = "vibrator",
+ .gpio = RK29_PIN1_PB5,
+ .max_timeout = 1000,
+ .active_low = 0,
+ .adjust_time =20, //adjust for diff product
+ },
+};
+
+struct timed_gpio_platform_data rk29_vibrator_info = {
+ .num_gpios = 1,
+ .gpios = timed_gpios,
+};
+
+struct platform_device rk29_device_vibrator ={
+ .name = "timed-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_vibrator_info,
+ },
+
+};
+#endif
+#ifdef CONFIG_BUTTON_LIGHT
+static int rk29_buttonlight_io_init(void)
+{
+ int ret = 0;
+
+ return ret;
+}
+
+static int rk29_buttonlight_io_deinit(void)
+{
+ int ret = 0;
+ return ret;
+}
+struct rk29_button_light_info rk29_button_light_info = {
+ .led_on_pin = RK29_PIN0_PA0,
+ .led_on_level = 1,
+ .io_init = rk29_buttonlight_io_init,
+ .io_deinit = rk29_buttonlight_io_deinit,
+
+};
+#endif
+static void __init rk29_board_iomux_init(void)
+{
+ int err;
+ #ifdef CONFIG_UART1_RK29
+ //disable uart1 pull down
+ rk29_mux_api_set(GPIO2A5_UART1SOUT_NAME, GPIO2L_GPIO2A5);
+ rk29_mux_api_set(GPIO2A4_UART1SIN_NAME, GPIO2L_GPIO2A4);
+
+ gpio_request(RK29_PIN2_PA5, NULL);
+ gpio_request(RK29_PIN2_PA4, NULL);
+
+ gpio_pull_updown(RK29_PIN2_PA5, PullDisable);
+ gpio_pull_updown(RK29_PIN2_PA4, PullDisable);
+
+ rk29_mux_api_set(GPIO2A5_UART1SOUT_NAME, GPIO2L_UART1_SOUT);
+ rk29_mux_api_set(GPIO2A4_UART1SIN_NAME, GPIO2L_UART1_SIN);
+
+ gpio_free(RK29_PIN2_PA5);
+ gpio_free(RK29_PIN2_PA4);
+ #endif
+ #if CONFIG_ANDROID_TIMED_GPIO
+ rk29_mux_api_set(GPIO1B5_PWM0_NAME, GPIO1L_GPIO1B5);//for timed gpio
+ #endif
+ #ifdef CONFIG_RK29_PWM_REGULATOR
+ rk29_mux_api_set(REGULATOR_PWM_MUX_NAME,REGULATOR_PWM_MUX_MODE);
+ #endif
+ rk29_mux_api_set(GPIO4C0_RMIICLKOUT_RMIICLKIN_NAME,GPIO4H_GPIO4C0);
+
+/****************************clock change********************************************/
+ err = gpio_request(RK29_PIN4_PC0, "clk27M_control");
+ if (err) {
+ gpio_free(RK29_PIN4_PC0);
+ printk("-------request RK29_PIN4_PC0 fail--------\n");
+ return -1;
+ }
+ //phy power down
+ gpio_direction_output(RK29_PIN4_PC0, GPIO_LOW);// 27M 32K
+ gpio_set_value(RK29_PIN4_PC0, GPIO_LOW);
+
+ rk29_mux_api_set(GPIO4C5_RMIICSRDVALID_MIIRXDVALID_NAME,GPIO4H_GPIO4C5);
+
+ err = gpio_request(RK29_PIN4_PC5, "clk24M_control");
+ if (err) {
+ gpio_free(RK29_PIN4_PC5);
+ printk("-------request RK29_PIN4_PC5 fail--------\n");
+ return -1;
+ }
+ //phy power down
+ gpio_direction_output(RK29_PIN4_PC5, GPIO_LOW);// control 24M
+ gpio_set_value(RK29_PIN4_PC5, GPIO_LOW);
+/*******************************************************************/
+
+
+}
+
+// For phone,just a disk only, add by phc,20110816
+#ifdef CONFIG_USB_ANDROID
+struct usb_mass_storage_platform_data phone_mass_storage_pdata = {
+ .nluns = 1,
+ .vendor = "RockChip",
+ .product = "rk29 sdk",
+ .release = 0x0100,
+};
+
+//static
+struct platform_device phone_usb_mass_storage_device = {
+ .name = "usb_mass_storage",
+ .id = -1,
+ .dev = {
+ .platform_data = &phone_mass_storage_pdata,
+ },
+};
+#endif
+
+#ifdef CONFIG_RK29_CHARGE_EARLYSUSPEND
+
+struct platform_device charge_lowerpower_device = {
+ .name = "charge_lowerpower",
+ .id = -1,
+};
+#endif
+
+static struct platform_device *devices[] __initdata = {
+
+#ifdef CONFIG_RK29_WATCHDOG
+ &rk29_device_wdt,
+#endif
+
+#ifdef CONFIG_UART1_RK29
+ &rk29_device_uart1,
+#endif
+#ifdef CONFIG_UART0_RK29
+ &rk29_device_uart0,
+#endif
+#ifdef CONFIG_UART2_RK29
+ &rk29_device_uart2,
+#endif
+#ifdef CONFIG_UART3_RK29
+ &rk29_device_uart3,
+#endif
+
+#ifdef CONFIG_RK29_PWM_REGULATOR
+ &rk29_device_pwm_regulator,
+#endif
+#ifdef CONFIG_SPIM0_RK29
+ &rk29xx_device_spi0m,
+#endif
+#ifdef CONFIG_SPIM1_RK29
+ &rk29xx_device_spi1m,
+#endif
+#ifdef CONFIG_ADC_RK29
+ &rk29_device_adc,
+#endif
+#ifdef CONFIG_I2C0_RK29
+ &rk29_device_i2c0,
+#endif
+#ifdef CONFIG_I2C1_RK29
+ &rk29_device_i2c1,
+#endif
+#ifdef CONFIG_I2C2_RK29
+ &rk29_device_i2c2,
+#endif
+#ifdef CONFIG_I2C3_RK29
+ &rk29_device_i2c3,
+#endif
+
+#ifdef CONFIG_SND_RK29_SOC_I2S_2CH
+ &rk29_device_iis_2ch,
+#endif
+#ifdef CONFIG_SND_RK29_SOC_I2S_8CH
+ &rk29_device_iis_8ch,
+#endif
+
+#ifdef CONFIG_KEYS_RK29
+ &rk29_device_keys,
+#endif
+#ifdef CONFIG_USE_GPIO_GENERATE_WAVE
+ &gpio_wave_device,
+#endif
+#ifdef CONFIG_SDMMC0_RK29
+ &rk29_device_sdmmc0,
+#endif
+#ifdef CONFIG_SDMMC1_RK29
+ &rk29_device_sdmmc1,
+#endif
+
+#ifdef CONFIG_MTD_NAND_RK29XX
+ &rk29xx_device_nand,
+#endif
+
+#ifdef CONFIG_WIFI_CONTROL_FUNC
+ &rk29sdk_wifi_device,
+#endif
+
+#ifdef CONFIG_BT
+ &rk29sdk_rfkill,
+#endif
+
+#if defined(CONFIG_TDSC8800)
+ &rk29_device_tdsc8800,
+#endif
+
+#ifdef CONFIG_MTD_NAND_RK29
+ &rk29_device_nand,
+#endif
+
+#ifdef CONFIG_FB_RK29
+ &rk29_device_fb,
+ &rk29_device_dma_cpy,
+#endif
+#ifdef CONFIG_BACKLIGHT_RK29_BL
+ &rk29_device_backlight,
+#endif
+#ifdef CONFIG_BUTTON_LIGHT
+ &rk29_device_buttonlight,
+#endif
+#ifdef CONFIG_RK29_VMAC
+ &rk29_device_vmac,
+#endif
+#ifdef CONFIG_VIVANTE
+ &rk29_device_gpu,
+#endif
+#ifdef CONFIG_VIDEO_RK29
+ &rk29_device_camera, /* ddl@rock-chips.com : camera support */
+ #if (CONFIG_SENSOR_IIC_ADDR_0 != 0x00)
+ &rk29_soc_camera_pdrv_0,
+ #endif
+ &rk29_soc_camera_pdrv_1,
+ &android_pmem_cam_device,
+#endif
+ &android_pmem_device,
+ &rk29_vpu_mem_device,
+#ifdef CONFIG_USB20_OTG
+ &rk29_device_usb20_otg,
+#endif
+#ifdef CONFIG_USB20_HOST
+ &rk29_device_usb20_host,
+#endif
+#ifdef CONFIG_USB11_HOST
+ &rk29_device_usb11_host,
+#endif
+#ifdef CONFIG_USB_ANDROID
+ &android_usb_device,
+ &phone_usb_mass_storage_device,
+#endif
+#ifdef CONFIG_RK29_IPP
+ &rk29_device_ipp,
+#endif
+#ifdef CONFIG_VIDEO_RK29XX_VOUT
+ &rk29_v4l2_output_devce,
+#endif
+#ifdef CONFIG_RK_HEADSET_DET
+ &rk_device_headset,
+#endif
+#ifdef CONFIG_RK29_GPS
+ &rk29_device_gps,
+#endif
+#ifdef CONFIG_RK29_CHARGE_EARLYSUSPEND
+ &charge_lowerpower_device,
+#endif
+#ifdef CONFIG_ANDROID_TIMED_GPIO
+ &rk29_device_vibrator,
+#endif
+};
+
+#ifdef CONFIG_RK29_VMAC
+/*****************************************************************************************
+ * vmac devices
+ * author: lyx@rock-chips.com
+ *****************************************************************************************/
+static int rk29_vmac_register_set(void)
+{
+ //config rk29 vmac as rmii, 100MHz
+ u32 value= readl(RK29_GRF_BASE + 0xbc);
+ value = (value & 0xfff7ff) | (0x400);
+ writel(value, RK29_GRF_BASE + 0xbc);
+ return 0;
+}
+
+static int rk29_rmii_io_init(void)
+{
+ int err;
+
+ //phy power gpio
+ err = gpio_request(RK29_PIN6_PB0, "phy_power_en");
+ if (err) {
+ gpio_free(RK29_PIN6_PB0);
+ printk("-------request RK29_PIN6_PB0 fail--------\n");
+ return -1;
+ }
+ //phy power down
+ gpio_direction_output(RK29_PIN6_PB0, GPIO_LOW);
+ gpio_set_value(RK29_PIN6_PB0, GPIO_LOW);
+
+ return 0;
+}
+
+static int rk29_rmii_io_deinit(void)
+{
+ //phy power down
+ gpio_direction_output(RK29_PIN6_PB0, GPIO_LOW);
+ gpio_set_value(RK29_PIN6_PB0, GPIO_LOW);
+ //free
+ gpio_free(RK29_PIN6_PB0);
+ return 0;
+}
+
+static int rk29_rmii_power_control(int enable)
+{
+ if (enable) {
+ //enable phy power
+ gpio_direction_output(RK29_PIN6_PB0, GPIO_HIGH);
+ gpio_set_value(RK29_PIN6_PB0, GPIO_HIGH);
+ }
+ else {
+ gpio_direction_output(RK29_PIN6_PB0, GPIO_LOW);
+ gpio_set_value(RK29_PIN6_PB0, GPIO_LOW);
+ }
+ return 0;
+}
+
+struct rk29_vmac_platform_data rk29_vmac_pdata = {
+ .vmac_register_set = rk29_vmac_register_set,
+ .rmii_io_init = rk29_rmii_io_init,
+ .rmii_io_deinit = rk29_rmii_io_deinit,
+ .rmii_power_control = rk29_rmii_power_control,
+};
+#endif
+
+/*****************************************************************************************
+ * spi devices
+ * author: cmc@rock-chips.com
+ *****************************************************************************************/
+#define SPI_CHIPSELECT_NUM 2
+static struct spi_cs_gpio rk29xx_spi0_cs_gpios[SPI_CHIPSELECT_NUM] = {
+ {
+ .name = "spi0 cs0",
+ .cs_gpio = RK29_PIN2_PC1,
+ .cs_iomux_name = GPIO2C1_SPI0CSN0_NAME,
+ .cs_iomux_mode = GPIO2H_SPI0_CSN0,
+ },
+ {
+ .name = "spi0 cs1",
+ .cs_gpio = RK29_PIN1_PA4,
+ .cs_iomux_name = GPIO1A4_EMMCWRITEPRT_SPI0CS1_NAME,//if no iomux,set it NULL
+ .cs_iomux_mode = GPIO1L_SPI0_CSN1,
+ }
+};
+
+static struct spi_cs_gpio rk29xx_spi1_cs_gpios[SPI_CHIPSELECT_NUM] = {
+ {
+ .name = "spi1 cs0",
+ .cs_gpio = RK29_PIN2_PC5,
+ .cs_iomux_name = GPIO2C5_SPI1CSN0_NAME,
+ .cs_iomux_mode = GPIO2H_SPI1_CSN0,
+ },
+ {
+ .name = "spi1 cs1",
+ .cs_gpio = RK29_PIN1_PA3,
+ .cs_iomux_name = GPIO1A3_EMMCDETECTN_SPI1CS1_NAME,//if no iomux,set it NULL
+ .cs_iomux_mode = GPIO1L_SPI1_CSN1,
+ }
+};
+
+static int spi_io_init(struct spi_cs_gpio *cs_gpios, int cs_num)
+{
+#if 1
+ int i;
+ if (cs_gpios) {
+ for (i=0; i<cs_num; i++) {
+ rk29_mux_api_set(cs_gpios[i].cs_iomux_name, cs_gpios[i].cs_iomux_mode);
+ }
+ }
+#endif
+ return 0;
+}
+
+static int spi_io_deinit(struct spi_cs_gpio *cs_gpios, int cs_num)
+{
+ return 0;
+}
+
+static int spi_io_fix_leakage_bug(void)
+{
+#if 0
+ gpio_direction_output(RK29_PIN2_PC1, GPIO_LOW);
+#endif
+ return 0;
+}
+
+static int spi_io_resume_leakage_bug(void)
+{
+#if 0
+ gpio_direction_output(RK29_PIN2_PC1, GPIO_HIGH);
+#endif
+ return 0;
+}
+
+struct rk29xx_spi_platform_data rk29xx_spi0_platdata = {
+ .num_chipselect = SPI_CHIPSELECT_NUM,
+ .chipselect_gpios = rk29xx_spi0_cs_gpios,
+ .io_init = spi_io_init,
+ .io_deinit = spi_io_deinit,
+ .io_fix_leakage_bug = spi_io_fix_leakage_bug,
+ .io_resume_leakage_bug = spi_io_resume_leakage_bug,
+};
+
+struct rk29xx_spi_platform_data rk29xx_spi1_platdata = {
+ .num_chipselect = SPI_CHIPSELECT_NUM,
+ .chipselect_gpios = rk29xx_spi1_cs_gpios,
+ .io_init = spi_io_init,
+ .io_deinit = spi_io_deinit,
+ .io_fix_leakage_bug = spi_io_fix_leakage_bug,
+ .io_resume_leakage_bug = spi_io_resume_leakage_bug,
+};
+
+/*****************************************************************************************
+ * xpt2046 touch panel
+ * author: hhb@rock-chips.com
+ *****************************************************************************************/
+#if defined(CONFIG_TOUCHSCREEN_XPT2046_NORMAL_SPI) || defined(CONFIG_TOUCHSCREEN_XPT2046_TSLIB_SPI)
+#define XPT2046_GPIO_INT RK29_PIN4_PD5 //中断???#define DEBOUNCE_REPTIME 3
+
+static struct xpt2046_platform_data xpt2046_info = {
+ .model = 2046,
+ .keep_vref_on = 1,
+ .swap_xy = 0,
+ .debounce_max = 7,
+ .debounce_rep = DEBOUNCE_REPTIME,
+ .debounce_tol = 20,
+ .gpio_pendown = XPT2046_GPIO_INT,
+ .pendown_iomux_name = GPIO4D5_CPUTRACECTL_NAME,
+ .pendown_iomux_mode = GPIO4H_GPIO4D5,
+ .touch_virtualkey_length = 60,
+ .penirq_recheck_delay_usecs = 1,
+#if defined(CONFIG_TOUCHSCREEN_480X800)
+ .x_min = 0,
+ .x_max = 480,
+ .y_min = 0,
+ .y_max = 800,
+ .touch_ad_top = 3940,
+ .touch_ad_bottom = 310,
+ .touch_ad_left = 3772,
+ .touch_ad_right = 340,
+#elif defined(CONFIG_TOUCHSCREEN_800X480)
+ .x_min = 0,
+ .x_max = 800,
+ .y_min = 0,
+ .y_max = 480,
+ .touch_ad_top = 2447,
+ .touch_ad_bottom = 207,
+ .touch_ad_left = 5938,
+ .touch_ad_right = 153,
+#elif defined(CONFIG_TOUCHSCREEN_320X480)
+ .x_min = 0,
+ .x_max = 320,
+ .y_min = 0,
+ .y_max = 480,
+ .touch_ad_top = 3166,
+ .touch_ad_bottom = 256,
+ .touch_ad_left = 3658,
+ .touch_ad_right = 380,
+#endif
+};
+#elif defined(CONFIG_TOUCHSCREEN_XPT2046_CBN_SPI)
+static struct xpt2046_platform_data xpt2046_info = {
+ .model = 2046,
+ .keep_vref_on = 1,
+ .swap_xy = 0,
+ .debounce_max = 7,
+ .debounce_rep = DEBOUNCE_REPTIME,
+ .debounce_tol = 20,
+ .gpio_pendown = XPT2046_GPIO_INT,
+ .pendown_iomux_name = GPIO4D5_CPUTRACECTL_NAME,
+ .pendown_iomux_mode = GPIO4H_GPIO4D5,
+ .touch_virtualkey_length = 60,
+ .penirq_recheck_delay_usecs = 1,
+
+#if defined(CONFIG_TOUCHSCREEN_480X800)
+ .x_min = 0,
+ .x_max = 480,
+ .y_min = 0,
+ .y_max = 800,
+ .screen_x = { 70, 410, 70, 410, 240},
+ .screen_y = { 50, 50, 740, 740, 400},
+ .uncali_x_default = { 3267, 831, 3139, 715, 1845 },
+ .uncali_y_default = { 3638, 3664, 564, 591, 2087 },
+#elif defined(CONFIG_TOUCHSCREEN_800X480)
+ .x_min = 0,
+ .x_max = 800,
+ .y_min = 0,
+ .y_max = 480,
+ .screen_x[5] = { 50, 750, 50, 750, 400};
+ .screen_y[5] = { 40, 40, 440, 440, 240};
+ .uncali_x_default[5] = { 438, 565, 3507, 3631, 2105 };
+ .uncali_y_default[5] = { 3756, 489, 3792, 534, 2159 };
+#elif defined(CONFIG_TOUCHSCREEN_320X480)
+ .x_min = 0,
+ .x_max = 320,
+ .y_min = 0,
+ .y_max = 480,
+ .screen_x[5] = { 50, 270, 50, 270, 160};
+ .screen_y[5] = { 40, 40, 440, 440, 240};
+ .uncali_x_default[5] = { 812, 3341, 851, 3371, 2183 };
+ .uncali_y_default[5] = { 442, 435, 3193, 3195, 2004 };
+#endif
+};
+#endif
+
+#if defined(CONFIG_RK29_SC8800)
+static struct plat_sc8800 sc8800_plat_data = {
+ .slav_rts_pin = RK29_PIN1_PC1,
+ .slav_rdy_pin = RK29_PIN0_PA3,
+ .master_rts_pin = RK29_PIN1_PC0,
+ .master_rdy_pin = RK29_PIN0_PA2,
+ //.poll_time = 100,
+};
+#endif
+/*
+static struct rk29xx_spi_chip cmb_spi_chip = {
+ .transfer_mode = rk29xx_SPI_FULL_DUPLEX,
+};
+*/
+/*****************************************************************************************
+ * CMMB IO CONFIG
+ * author: lby@rock-chips.com
+ *****************************************************************************************/
+#if defined(CONFIG_SMS_SPI_ROCKCHIP)
+#define CMMB_1186_SPIIRQ RK29_PIN6_PD1
+void cmmb_io_init_mux(void)
+{
+// rk29_mux_api_set(GPIO1A4_EMMCWRITEPRT_SPI0CS1_NAME, GPIO1L_GPIO1A4);
+
+}
+void cmmb_io_set_for_pm(void)
+{
+ printk("entering cmmb_io_set_for_pm\n");
+ gpio_request(RK29_PIN6_PD2, NULL);//cmmb reset pin
+ gpio_direction_output(RK29_PIN6_PD2,0);
+ rk29_mux_api_set(GPIO1A3_EMMCDETECTN_SPI1CS1_NAME,GPIO1L_GPIO1A3);
+ gpio_request(RK29_PIN1_PA3, NULL);//cmmb cs pin
+ gpio_direction_input(RK29_PIN1_PA3);
+ gpio_pull_updown(RK29_PIN1_PA3, 0);
+}
+
+void cmmb_power_on_by_wm831x(void)
+{
+ struct regulator *ldo;
+
+ printk("entering cmmb_power_on_by_wm831x\n");
+
+ rk29_mux_api_set(GPIO1A3_EMMCDETECTN_SPI1CS1_NAME,GPIO1L_SPI0_CSN1);
+ gpio_request(RK29_PIN6_PD2, NULL);
+ gpio_direction_output(RK29_PIN6_PD2,0);
+ mdelay(200);
+
+ ldo = regulator_get(NULL, "ldo8"); //cmmb
+ regulator_set_voltage(ldo,1200000,1200000);
+ regulator_set_suspend_voltage(ldo,1200000);
+ regulator_enable(ldo);
+ printk("%s set ldo8=%dmV end\n", __FUNCTION__, regulator_get_voltage(ldo));
+ regulator_put(ldo);
+
+ ldo = regulator_get(NULL, "ldo9"); //cmmb
+ regulator_set_voltage(ldo,3000000,3000000);
+ regulator_set_suspend_voltage(ldo,3000000);
+ regulator_enable(ldo);
+ printk("%s set ldo9=%dmV end\n", __FUNCTION__, regulator_get_voltage(ldo));
+ regulator_put(ldo);
+
+ mdelay(200);
+ gpio_direction_output(RK29_PIN6_PD2,1);
+}
+
+void cmmb_power_down_by_wm831x(void)
+{
+ struct regulator* ldo;
+
+ printk("entering cmmb_power_down_by_wm831x\n");
+
+ ldo = regulator_get(NULL, "ldo8");
+ regulator_set_voltage(ldo,0,0);
+ regulator_disable(ldo);
+ regulator_put(ldo);
+
+ ldo = regulator_get(NULL, "ldo9");
+ regulator_set_voltage(ldo,0,0);
+ regulator_disable(ldo);
+ regulator_put(ldo);
+}
+
+static struct cmmb_io_def_s cmmb_io = {
+ .cmmb_pw_en = INVALID_GPIO,
+ .cmmb_pw_dwn = INVALID_GPIO,
+ .cmmb_pw_rst = RK29_PIN6_PD2,
+ .cmmb_irq = CMMB_1186_SPIIRQ,
+ .io_init_mux = cmmb_io_init_mux,
+ .cmmb_io_pm = cmmb_io_set_for_pm,
+ .cmmb_power_on = cmmb_power_on_by_wm831x,
+ .cmmb_power_down = cmmb_power_down_by_wm831x
+};
+#endif
+static struct spi_board_info board_spi_devices[] = {
+#if defined(CONFIG_TOUCHSCREEN_XPT2046_SPI)
+ {
+ .modalias = "xpt2046_ts",
+ .chip_select = 0,// 2,
+ .max_speed_hz = 125 * 1000 * 26,/* (max sample rate @ 3V) * (cmd + data + overhead) */
+ .bus_num = 0,
+ .irq = XPT2046_GPIO_INT,
+ .platform_data = &xpt2046_info,
+ },
+#endif
+
+#if defined(CONFIG_MFD_WM831X_SPI)
+ {
+ .modalias = "wm8310",
+ .chip_select = 1,
+ .max_speed_hz = 1*1000*1000,
+ .bus_num = 1,
+ .irq = RK29_PIN4_PD0,
+ .platform_data = &wm831x_platdata,
+ },
+#endif
+#if defined(CONFIG_RK29_SC8800)
+ {
+ .modalias = "sc8800",
+ .bus_num = 0,
+ .platform_data = &sc8800_plat_data,
+ .max_speed_hz = 12*1000*1000,
+ .chip_select = 0,
+ },
+#endif
+
+#if defined(CONFIG_SMS_SPI_ROCKCHIP)
+ {
+ .modalias = "siano1186",
+ .chip_select = 1,
+ .max_speed_hz = 12*1000*1000,
+ .bus_num = 1,
+ .irq =CMMB_1186_SPIIRQ,
+ //.controller_data = &cmb_spi_chip,
+ .platform_data = &cmmb_io,
+ },
+#endif
+};
+
+
+/**********************************************************************************************
+ *
+ * The virtual keys for android "back", "home", "menu", "search", these four keys are touch key
+ * on the touch screen panel. (added by hhb@rock-chips.com 2011.03.31)
+ *
+ ***********************************************************************************************/
+static ssize_t rk29xx_virtual_keys_show(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+#if (defined(CONFIG_TOUCHSCREEN_XPT2046_SPI) && defined(CONFIG_TOUCHSCREEN_480X800)) \
+ || defined(CONFIG_TOUCHSCREEN_HX8520_IIC) || defined(CONFIG_TOUCHSCREEN_GT801_IIC)\
+ || defined(CONFIG_TOUCHSCREEN_PIXCIR)
+ /* center: x: home: 50, menu: 184, back: 315, search 435, y: 830*/
+ /* centerx;centery;width;height; */
+ return sprintf(buf,
+ __stringify(EV_KEY) ":" __stringify(KEY_BACK) ":305:845:50:60"//":305:845:50:60" //":50:830:98:50" //":210:796:98:50"
+ ":" __stringify(EV_KEY) ":" __stringify(KEY_MENU) ":165:845:50:60"//":165:845:50:60" // ":184:830:120:50" // ":435:796:120:50"
+ ":" __stringify(EV_KEY) ":" __stringify(KEY_HOME) ":25:845:120:60"//":25:845:50:60" //":315:830:100:50" //":320:796:100:50"
+ ":" __stringify(EV_KEY) ":" __stringify(KEY_SEARCH) ":445:845:50:60"//":445:845:50:60" //":50:815:98:50" // //":85:796:88:50"
+ "\n");
+#endif
+#if defined(CONFIG_TOUCHSCREEN_FT5X0X) || defined(CONFIG_TOUCHSCREEN_ILI2102_IIC)
+ return sprintf(buf,
+ __stringify(EV_KEY) ":" __stringify(KEY_BACK) ":305:875:60:60"//":305:845:50:60" //":50:830:98:50" //":210:796:98:50"
+ ":" __stringify(EV_KEY) ":" __stringify(KEY_MENU) ":165:875:60:60"//":165:845:50:60" // ":184:830:120:50" // ":435:796:120:50"
+ ":" __stringify(EV_KEY) ":" __stringify(KEY_HOME) ":30:875:60:60"//":25:845:50:60" //":315:830:100:50" //":320:796:100:50"
+ ":" __stringify(EV_KEY) ":" __stringify(KEY_SEARCH) ":445:875:60:60"//":445:845:50:60" //":50:815:98:50" // //":85:796:88:50"
+ "\n");
+#endif
+ return 0;
+}
+
+static struct kobj_attribute rk29xx_virtual_keys_attr = {
+ .attr = {
+#if defined(CONFIG_TOUCHSCREEN_XPT2046_SPI)
+ .name = "virtualkeys.xpt2046-touchscreen",
+#elif defined(CONFIG_TOUCHSCREEN_HX8520_IIC)
+ .name = "virtualkeys.hx8520-touchscreen",
+#elif defined(CONFIG_TOUCHSCREEN_GT801_IIC)
+ .name = "virtualkeys.gt801-touchscreen",
+#elif defined(CONFIG_TOUCHSCREEN_ILI2102_IIC)
+ .name = "virtualkeys.ili2102-touchscreen",
+#elif defined(CONFIG_TOUCHSCREEN_FT5X0X)
+ .name = "virtualkeys.ft5x0x_ts-touchscreen",
+#elif defined(CONFIG_TOUCHSCREEN_PIXCIR)
+ .name = "virtualkeys.pixcir_ts-touchscreen",
+#else
+ .name = "virtualkeys",
+#endif
+ .mode = S_IRUGO,
+ },
+ .show = &rk29xx_virtual_keys_show,
+};
+
+static struct attribute *rk29xx_properties_attrs[] = {
+ &rk29xx_virtual_keys_attr.attr,
+ NULL
+};
+
+static struct attribute_group rk29xx_properties_attr_group = {
+ .attrs = rk29xx_properties_attrs,
+};
+static int rk29xx_virtual_keys_init(void)
+{
+ int ret;
+ struct kobject *properties_kobj;
+ printk("rk29xx_virtual_keys_init \n");
+ properties_kobj = kobject_create_and_add("board_properties", NULL);
+ if (properties_kobj)
+ ret = sysfs_create_group(properties_kobj,
+ &rk29xx_properties_attr_group);
+ if (!properties_kobj || ret)
+ {
+ pr_err("failed to create board_properties\n");
+ }
+ return ret;
+}
+
+
+static void __init rk29_gic_init_irq(void)
+{
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 38))
+ gic_init(0, 32, (void __iomem *)RK29_GICPERI_BASE, (void __iomem *)RK29_GICCPU_BASE);
+#else
+ gic_dist_init(0, (void __iomem *)RK29_GICPERI_BASE, 32);
+ gic_cpu_init(0, (void __iomem *)RK29_GICCPU_BASE);
+#endif
+}
+
+static void __init machine_rk29_init_irq(void)
+{
+ rk29_gic_init_irq();
+ rk29_gpio_init();
+}
+
+
+
+static void rk29_pm_power_restart(void)
+{
+ printk("%s,line=%d\n",__FUNCTION__,__LINE__);
+ mdelay(2);
+#if defined(CONFIG_MFD_WM831X)
+ wm831x_device_restart(gWm831x);
+#endif
+
+}
+
+static void rk29_pm_power_off(void)
+{
+ printk(KERN_ERR "rk29_pm_power_off start...\n");
+ gpio_direction_output(POWER_ON_PIN, GPIO_LOW);
+ gpio_direction_output(BP_VOL_PIN,GPIO_LOW);
+#if defined(CONFIG_MFD_WM831X)
+ if(wm831x_read_usb(gWm831x))
+ rk29_pm_power_restart(); //if charging then restart
+ else
+ wm831x_device_shutdown(gWm831x);//else shutdown
+#endif
+ while (1);
+}
+
+static struct cpufreq_frequency_table freq_table[] =
+{
+ { .index = 1100000, .frequency = 408000 },
+ { .index = 1150000, .frequency = 600000 },
+ { .index = 1200000, .frequency = 816000 },
+// { .index = 1300000, .frequency = 1008000 },
+ { .frequency = CPUFREQ_TABLE_END },
+};
+
+static void __init machine_rk29_board_init(void)
+{
+ rk29_board_iomux_init();
+
+ gpio_request(POWER_ON_PIN,"poweronpin");
+ gpio_set_value(POWER_ON_PIN, GPIO_HIGH);
+ gpio_direction_output(POWER_ON_PIN, GPIO_HIGH);
+ gpio_request(RK29_PIN0_PA0,NULL);
+ gpio_direction_output(RK29_PIN0_PA0, 0);
+
+ pm_power_off = rk29_pm_power_off;
+ //arm_pm_restart = rk29_pm_power_restart;
+
+ board_update_cpufreq_table(freq_table);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+#ifdef CONFIG_I2C0_RK29
+ i2c_register_board_info(default_i2c0_data.bus_num, board_i2c0_devices,
+ ARRAY_SIZE(board_i2c0_devices));
+#endif
+#ifdef CONFIG_I2C1_RK29
+ i2c_register_board_info(default_i2c1_data.bus_num, board_i2c1_devices,
+ ARRAY_SIZE(board_i2c1_devices));
+#endif
+#ifdef CONFIG_I2C2_RK29
+ i2c_register_board_info(default_i2c2_data.bus_num, board_i2c2_devices,
+ ARRAY_SIZE(board_i2c2_devices));
+#endif
+#ifdef CONFIG_I2C3_RK29
+ i2c_register_board_info(default_i2c3_data.bus_num, board_i2c3_devices,
+ ARRAY_SIZE(board_i2c3_devices));
+#endif
+
+ spi_register_board_info(board_spi_devices, ARRAY_SIZE(board_spi_devices));
+
+#ifdef CONFIG_WIFI_CONTROL_FUNC
+ rk29sdk_wifi_bt_gpio_control_init();
+ rk29sdk_init_wifi_mem();
+#endif
+
+ #if (defined(CONFIG_TOUCHSCREEN_XPT2046_SPI) && defined(CONFIG_TOUCHSCREEN_480X800)) \
+ || defined(CONFIG_TOUCHSCREEN_HX8520_IIC) || defined(CONFIG_TOUCHSCREEN_GT801_IIC)\
+ || defined(CONFIG_TOUCHSCREEN_PIXCIR) || defined(CONFIG_TOUCHSCREEN_FT5X0X)\
+ || defined(CONFIG_TOUCHSCREEN_ILI2102_IIC)
+ rk29xx_virtual_keys_init();
+ #endif
+
+}
+
+static void __init machine_rk29_fixup(struct machine_desc *desc, struct tag *tags,
+ char **cmdline, struct meminfo *mi)
+{
+ mi->nr_banks = 1;
+ mi->bank[0].start = RK29_SDRAM_PHYS;
+ //mi->bank[0].node = PHYS_TO_NID(RK29_SDRAM_PHYS);
+ mi->bank[0].size = LINUX_SIZE;
+#if SDRAM_SIZE > SZ_512M
+ mi->nr_banks = 2;
+ mi->bank[1].start = RK29_SDRAM_PHYS + SZ_512M;
+ mi->bank[1].size = SDRAM_SIZE - SZ_512M;
+#endif
+}
+
+static void __init machine_rk29_mapio(void)
+{
+ rk29_map_common_io();
+ rk29_setup_early_printk();
+ rk29_sram_init();
+ rk29_clock_init2(periph_pll_96mhz, codec_pll_300mhz, false);
+ rk29_iomux_init();
+ ddr_init(DDR_TYPE, DDR_FREQ);
+}
+
+MACHINE_START(RK29, "RK29board")
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 37))
+ /* UART for LL DEBUG */
+ .phys_io = RK29_UART1_PHYS & 0xfff00000,
+ .io_pg_offst = ((RK29_UART1_BASE) >> 18) & 0xfffc,
+#endif
+ .boot_params = RK29_SDRAM_PHYS + 0x88000,
+ .fixup = machine_rk29_fixup,
+ .map_io = machine_rk29_mapio,
+ .init_irq = machine_rk29_init_irq,
+ .init_machine = machine_rk29_board_init,
+ .timer = &rk29_timer,
+MACHINE_END
projects / firefly-linux-kernel-4.4.55.git / commitdiff