The md5sum is identical after rename, so this commit is safe.
Change-Id: I97cb5faecebaad9d2e9c39f67f19f662642cc5e8
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-box-rev1-disvr.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-box-rev2-android-6.0.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-box-rev2-disvr.dtb
-dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-box-rev1-next.dtb
-dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-box-rev2-next.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-box-rev1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-box-rev2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-disvr-android.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-rev1-android-6.0.dtb
-dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-rev1-android-next.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-rev1-android.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-rev1-cros.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-rev2-android-6.0.dtb
-dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-rev2-android-next.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-rev2-android.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-rev2-cros.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-rev3-android-6.0.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-rev3-android-6.0-edp.dtb
-dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-rev3-android-edp-next.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-rev3-android-edp.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-rev3-cros.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-fpga.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-gru.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin-r0.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin-r1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-mid-818-android-6.0.dtb
-dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-mid-818-android-next.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-mid-818-android.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rv1-android.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator-box-android-6.0.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator-disvr.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator-edp-android-6.0.dtb
-dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator-edp-next.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator-edp.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator-linux.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-tve1205g.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-vr-android.dtb
+++ /dev/null
-/*
- * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/display/drm_mipi_dsi.h>
-#include <dt-bindings/display/media-bus-format.h>
-#include "rk3399-vop-clk-set.dtsi"
-
-/ {
- compatible = "rockchip,android", "rockchip,rk3399";
-
- chosen {
- bootargs = "earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1";
- };
-
- ramoops_mem: ramoops_mem {
- reg = <0x0 0x110000 0x0 0xf0000>;
- reg-names = "ramoops_mem";
- };
-
- ramoops {
- compatible = "ramoops";
- record-size = <0x0 0x20000>;
- console-size = <0x0 0x80000>;
- ftrace-size = <0x0 0x00000>;
- pmsg-size = <0x0 0x50000>;
- memory-region = <&ramoops_mem>;
- };
-
- fiq_debugger: fiq-debugger {
- compatible = "rockchip,fiq-debugger";
- rockchip,serial-id = <2>;
- rockchip,signal-irq = <182>;
- rockchip,wake-irq = <0>;
- rockchip,irq-mode-enable = <1>; /* If enable uart uses irq instead of fiq */
- rockchip,baudrate = <1500000>; /* Only 115200 and 1500000 */
- pinctrl-names = "default";
- pinctrl-0 = <&uart2c_xfer>;
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- drm_logo: drm-logo@00000000 {
- compatible = "rockchip,drm-logo";
- reg = <0x0 0x0 0x0 0x0>;
- };
- };
-
- rk_key: rockchip-key {
- compatible = "rockchip,key";
- status = "okay";
-
- io-channels = <&saradc 1>;
-
- vol-up-key {
- linux,code = <115>;
- label = "volume up";
- rockchip,adc_value = <1>;
- };
-
- vol-down-key {
- linux,code = <114>;
- label = "volume down";
- rockchip,adc_value = <170>;
- };
-
- power-key {
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
- linux,code = <116>;
- label = "power";
- gpio-key,wakeup;
- };
-
- menu-key {
- linux,code = <59>;
- label = "menu";
- rockchip,adc_value = <746>;
- };
-
- home-key {
- linux,code = <102>;
- label = "home";
- rockchip,adc_value = <355>;
- };
-
- back-key {
- linux,code = <158>;
- label = "back";
- rockchip,adc_value = <560>;
- };
-
- camera-key {
- linux,code = <212>;
- label = "camera";
- rockchip,adc_value = <450>;
- };
- };
-
- rga: rga@ff680000 {
- compatible = "rockchip,rga2";
- dev_mode = <1>;
- reg = <0x0 0xff680000 0x0 0x1000>;
- interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>;
- clock-names = "aclk_rga", "hclk_rga", "clk_rga";
- power-domains = <&power RK3399_PD_RGA>;
- dma-coherent;
- status = "okay";
- };
-
- isp0: isp@ff910000 {
- compatible = "rockchip,rk3399-isp", "rockchip,isp";
- reg = <0x0 0xff910000 0x0 0x4000>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks =
- <&cru SCLK_CIF_OUT>, <&cru SCLK_CIF_OUT>,
- <&cru SCLK_DPHY_TX1RX1_CFG>, <&cru SCLK_MIPIDPHY_REF>,
- <&cru ACLK_ISP0_NOC>, <&cru ACLK_ISP0_WRAPPER>,
- <&cru HCLK_ISP0_NOC>, <&cru HCLK_ISP0_WRAPPER>,
- <&cru SCLK_ISP0>, <&cru SCLK_DPHY_RX0_CFG>;
- clock-names =
- "clk_cif_out", "clk_cif_pll",
- "pclk_dphytxrx", "pclk_dphy_ref",
- "aclk_isp0_noc", "aclk_isp0_wrapper",
- "hclk_isp0_noc", "hclk_isp0_wrapper",
- "clk_isp0", "pclk_dphyrx";
- pinctrl-names =
- "cif_clkout", "isp_dvp8bit0", "isp_mipi_fl",
- "isp_mipi_fl_prefl", "isp_flash_as_gpio",
- "isp_flash_as_trigger_out";
- pinctrl-0 = <&cif_clkout>;
- pinctrl-1 = <&isp_dvp_d0d7>;
- pinctrl-2 = <&cif_clkout>;
- pinctrl-3 = <&isp_prelight>;
- pinctrl-4 = <&isp_flash_trigger_as_gpio>;
- pinctrl-5 = <&isp_flash_trigger>;
- rockchip,isp,mipiphy = <2>;
- rockchip,isp,cifphy = <1>;
- rockchip,isp,dsiphy,reg = <0xff968000 0x8000>;
- rockchip,grf = <&grf>;
- rockchip,cru = <&cru>;
- rockchip,gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
- rockchip,isp,iommu-enable = <1>;
- power-domains = <&power RK3399_PD_ISP0>;
- iommus = <&isp0_mmu>;
- status = "disabled";
- };
-
- isp1: isp@ff920000 {
- compatible = "rockchip,rk3399-isp", "rockchip,isp";
- reg = <0x0 0xff920000 0x0 0x4000>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks =
- <&cru ACLK_ISP1_NOC>, <&cru ACLK_ISP1_WRAPPER>,
- <&cru HCLK_ISP1_NOC>, <&cru HCLK_ISP1_WRAPPER>,
- <&cru SCLK_ISP1>, <&cru SCLK_CIF_OUT>,
- <&cru SCLK_CIF_OUT>, <&cru SCLK_DPHY_TX1RX1_CFG>,
- <&cru SCLK_MIPIDPHY_REF>, <&cru PCLK_ISP1_WRAPPER>,
- <&cru SCLK_DPHY_RX0_CFG>, <&cru PCLK_MIPI_DSI1>,
- <&cru SCLK_MIPIDPHY_CFG>;
- clock-names =
- "aclk_isp1_noc", "aclk_isp1_wrapper",
- "hclk_isp1_noc", "hclk_isp1_wrapper",
- "clk_isp1", "clk_cif_out",
- "clk_cif_pll", "pclk_dphytxrx",
- "pclk_dphy_ref", "pclk_isp1",
- "pclk_dphyrx", "pclk_mipi_dsi",
- "mipi_dphy_cfg";
- pinctrl-names =
- "cif_clkout", "isp_dvp8bit0", "isp_mipi_fl",
- "isp_mipi_fl_prefl", "isp_flash_as_gpio",
- "isp_flash_as_trigger_out";
- pinctrl-0 = <&cif_clkout>;
- pinctrl-1 = <&isp_dvp_d0d7>;
- pinctrl-2 = <&cif_clkout>;
- pinctrl-3 = <&isp_prelight>;
- pinctrl-4 = <&isp_flash_trigger_as_gpio>;
- pinctrl-5 = <&isp_flash_trigger>;
- rockchip,isp,mipiphy = <2>;
- rockchip,isp,cifphy = <1>;
- rockchip,isp,dsiphy,reg = <0xff968000 0x8000>;
- rockchip,grf = <&grf>;
- rockchip,cru = <&cru>;
- rockchip,gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
- rockchip,isp,iommu-enable = <1>;
- power-domains = <&power RK3399_PD_ISP1>;
- iommus = <&isp1_mmu>;
- status = "disabled";
- };
-
- uboot-charge {
- compatible = "rockchip,uboot-charge";
- rockchip,uboot-charge-on = <1>;
- rockchip,android-charge-on = <0>;
- };
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
-
-&i2c3 {
- status = "okay";
- i2c-scl-rising-time-ns = <450>;
- i2c-scl-falling-time-ns = <15>;
-};
-
-&hdmi {
- #address-cells = <1>;
- #size-cells = <0>;
- #sound-dai-cells = <0>;
- ddc-i2c-bus = <&i2c3>;
- status = "okay";
-};
-
-&display_subsystem {
- status = "okay";
-
- ports = <&vopb_out>, <&vopl_out>;
- memory-region = <&drm_logo>;
- route {
- route_hdmi: route-hdmi {
- status = "disabled";
- logo,uboot = "logo.bmp";
- logo,kernel = "logo_kernel.bmp";
- logo,mode = "fullscreen";
- charge_logo,mode = "center";
- connect = <&vopb_out_hdmi>;
- };
-
- route_mipi: route-mipi {
- status = "disabled";
- logo,uboot = "logo.bmp";
- logo,kernel = "logo_kernel.bmp";
- logo,mode = "fullscreen";
- charge_logo,mode = "center";
- connect = <&vopb_out_mipi>;
- };
-
- route_edp: route-edp {
- status = "disabled";
- logo,uboot = "logo.bmp";
- logo,kernel = "logo_kernel.bmp";
- logo,mode = "fullscreen";
- charge_logo,mode = "center";
- connect = <&vopb_out_edp>;
- };
- };
-};
-
-&i2s2 {
- #sound-dai-cells = <0>;
-};
-
-&usbdrd_dwc3_0 {
- dr_mode = "otg";
-};
-
-&pinctrl {
- isp {
- cif_clkout: cif-clkout {
- rockchip,pins =
- /*cif_clkout*/
- <2 11 RK_FUNC_3 &pcfg_pull_none>;
- };
-
- isp_dvp_d0d7: isp-dvp-d0d7 {
- rockchip,pins =
- /*cif_data0*/
- <2 0 RK_FUNC_3 &pcfg_pull_none>,
- /*cif_data1*/
- <2 1 RK_FUNC_3 &pcfg_pull_none>,
- /*cif_data2*/
- <2 2 RK_FUNC_3 &pcfg_pull_none>,
- /*cif_data3*/
- <2 3 RK_FUNC_3 &pcfg_pull_none>,
- /*cif_data4*/
- <2 4 RK_FUNC_3 &pcfg_pull_none>,
- /*cif_data5*/
- <2 5 RK_FUNC_3 &pcfg_pull_none>,
- /*cif_data6*/
- <2 6 RK_FUNC_3 &pcfg_pull_none>,
- /*cif_data7*/
- <2 7 RK_FUNC_3 &pcfg_pull_none>,
- /*cif_sync*/
- <2 8 RK_FUNC_3 &pcfg_pull_none>,
- /*cif_href*/
- <2 9 RK_FUNC_3 &pcfg_pull_none>,
- /*cif_clkin*/
- <2 10 RK_FUNC_3 &pcfg_pull_none>;
- };
-
- isp_shutter: isp-shutter {
- rockchip,pins =
- /*SHUTTEREN*/
- <1 1 RK_FUNC_1 &pcfg_pull_none>,
- /*SHUTTERTRIG*/
- <1 0 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- isp_flash_trigger: isp-flash-trigger {
- /*ISP_FLASHTRIGOU*/
- rockchip,pins = <1 3 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- isp_prelight: isp-prelight {
- /*ISP_PRELIGHTTRIG*/
- rockchip,pins = <1 4 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- isp_flash_trigger_as_gpio: isp_flash_trigger_as_gpio {
- /*ISP_FLASHTRIGOU*/
- rockchip,pins =
- <0 17 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
--- /dev/null
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/display/drm_mipi_dsi.h>
+#include <dt-bindings/display/media-bus-format.h>
+#include "rk3399-vop-clk-set.dtsi"
+
+/ {
+ compatible = "rockchip,android", "rockchip,rk3399";
+
+ chosen {
+ bootargs = "earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1";
+ };
+
+ ramoops_mem: ramoops_mem {
+ reg = <0x0 0x110000 0x0 0xf0000>;
+ reg-names = "ramoops_mem";
+ };
+
+ ramoops {
+ compatible = "ramoops";
+ record-size = <0x0 0x20000>;
+ console-size = <0x0 0x80000>;
+ ftrace-size = <0x0 0x00000>;
+ pmsg-size = <0x0 0x50000>;
+ memory-region = <&ramoops_mem>;
+ };
+
+ fiq_debugger: fiq-debugger {
+ compatible = "rockchip,fiq-debugger";
+ rockchip,serial-id = <2>;
+ rockchip,signal-irq = <182>;
+ rockchip,wake-irq = <0>;
+ rockchip,irq-mode-enable = <1>; /* If enable uart uses irq instead of fiq */
+ rockchip,baudrate = <1500000>; /* Only 115200 and 1500000 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2c_xfer>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ drm_logo: drm-logo@00000000 {
+ compatible = "rockchip,drm-logo";
+ reg = <0x0 0x0 0x0 0x0>;
+ };
+ };
+
+ rk_key: rockchip-key {
+ compatible = "rockchip,key";
+ status = "okay";
+
+ io-channels = <&saradc 1>;
+
+ vol-up-key {
+ linux,code = <115>;
+ label = "volume up";
+ rockchip,adc_value = <1>;
+ };
+
+ vol-down-key {
+ linux,code = <114>;
+ label = "volume down";
+ rockchip,adc_value = <170>;
+ };
+
+ power-key {
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ linux,code = <116>;
+ label = "power";
+ gpio-key,wakeup;
+ };
+
+ menu-key {
+ linux,code = <59>;
+ label = "menu";
+ rockchip,adc_value = <746>;
+ };
+
+ home-key {
+ linux,code = <102>;
+ label = "home";
+ rockchip,adc_value = <355>;
+ };
+
+ back-key {
+ linux,code = <158>;
+ label = "back";
+ rockchip,adc_value = <560>;
+ };
+
+ camera-key {
+ linux,code = <212>;
+ label = "camera";
+ rockchip,adc_value = <450>;
+ };
+ };
+
+ rga: rga@ff680000 {
+ compatible = "rockchip,rga2";
+ dev_mode = <1>;
+ reg = <0x0 0xff680000 0x0 0x1000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>;
+ clock-names = "aclk_rga", "hclk_rga", "clk_rga";
+ power-domains = <&power RK3399_PD_RGA>;
+ dma-coherent;
+ status = "okay";
+ };
+
+ isp0: isp@ff910000 {
+ compatible = "rockchip,rk3399-isp", "rockchip,isp";
+ reg = <0x0 0xff910000 0x0 0x4000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks =
+ <&cru SCLK_CIF_OUT>, <&cru SCLK_CIF_OUT>,
+ <&cru SCLK_DPHY_TX1RX1_CFG>, <&cru SCLK_MIPIDPHY_REF>,
+ <&cru ACLK_ISP0_NOC>, <&cru ACLK_ISP0_WRAPPER>,
+ <&cru HCLK_ISP0_NOC>, <&cru HCLK_ISP0_WRAPPER>,
+ <&cru SCLK_ISP0>, <&cru SCLK_DPHY_RX0_CFG>;
+ clock-names =
+ "clk_cif_out", "clk_cif_pll",
+ "pclk_dphytxrx", "pclk_dphy_ref",
+ "aclk_isp0_noc", "aclk_isp0_wrapper",
+ "hclk_isp0_noc", "hclk_isp0_wrapper",
+ "clk_isp0", "pclk_dphyrx";
+ pinctrl-names =
+ "cif_clkout", "isp_dvp8bit0", "isp_mipi_fl",
+ "isp_mipi_fl_prefl", "isp_flash_as_gpio",
+ "isp_flash_as_trigger_out";
+ pinctrl-0 = <&cif_clkout>;
+ pinctrl-1 = <&isp_dvp_d0d7>;
+ pinctrl-2 = <&cif_clkout>;
+ pinctrl-3 = <&isp_prelight>;
+ pinctrl-4 = <&isp_flash_trigger_as_gpio>;
+ pinctrl-5 = <&isp_flash_trigger>;
+ rockchip,isp,mipiphy = <2>;
+ rockchip,isp,cifphy = <1>;
+ rockchip,isp,dsiphy,reg = <0xff968000 0x8000>;
+ rockchip,grf = <&grf>;
+ rockchip,cru = <&cru>;
+ rockchip,gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ rockchip,isp,iommu-enable = <1>;
+ power-domains = <&power RK3399_PD_ISP0>;
+ iommus = <&isp0_mmu>;
+ status = "disabled";
+ };
+
+ isp1: isp@ff920000 {
+ compatible = "rockchip,rk3399-isp", "rockchip,isp";
+ reg = <0x0 0xff920000 0x0 0x4000>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks =
+ <&cru ACLK_ISP1_NOC>, <&cru ACLK_ISP1_WRAPPER>,
+ <&cru HCLK_ISP1_NOC>, <&cru HCLK_ISP1_WRAPPER>,
+ <&cru SCLK_ISP1>, <&cru SCLK_CIF_OUT>,
+ <&cru SCLK_CIF_OUT>, <&cru SCLK_DPHY_TX1RX1_CFG>,
+ <&cru SCLK_MIPIDPHY_REF>, <&cru PCLK_ISP1_WRAPPER>,
+ <&cru SCLK_DPHY_RX0_CFG>, <&cru PCLK_MIPI_DSI1>,
+ <&cru SCLK_MIPIDPHY_CFG>;
+ clock-names =
+ "aclk_isp1_noc", "aclk_isp1_wrapper",
+ "hclk_isp1_noc", "hclk_isp1_wrapper",
+ "clk_isp1", "clk_cif_out",
+ "clk_cif_pll", "pclk_dphytxrx",
+ "pclk_dphy_ref", "pclk_isp1",
+ "pclk_dphyrx", "pclk_mipi_dsi",
+ "mipi_dphy_cfg";
+ pinctrl-names =
+ "cif_clkout", "isp_dvp8bit0", "isp_mipi_fl",
+ "isp_mipi_fl_prefl", "isp_flash_as_gpio",
+ "isp_flash_as_trigger_out";
+ pinctrl-0 = <&cif_clkout>;
+ pinctrl-1 = <&isp_dvp_d0d7>;
+ pinctrl-2 = <&cif_clkout>;
+ pinctrl-3 = <&isp_prelight>;
+ pinctrl-4 = <&isp_flash_trigger_as_gpio>;
+ pinctrl-5 = <&isp_flash_trigger>;
+ rockchip,isp,mipiphy = <2>;
+ rockchip,isp,cifphy = <1>;
+ rockchip,isp,dsiphy,reg = <0xff968000 0x8000>;
+ rockchip,grf = <&grf>;
+ rockchip,cru = <&cru>;
+ rockchip,gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ rockchip,isp,iommu-enable = <1>;
+ power-domains = <&power RK3399_PD_ISP1>;
+ iommus = <&isp1_mmu>;
+ status = "disabled";
+ };
+
+ uboot-charge {
+ compatible = "rockchip,uboot-charge";
+ rockchip,uboot-charge-on = <1>;
+ rockchip,android-charge-on = <0>;
+ };
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+};
+
+&hdmi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <0>;
+ ddc-i2c-bus = <&i2c3>;
+ status = "okay";
+};
+
+&display_subsystem {
+ status = "okay";
+
+ ports = <&vopb_out>, <&vopl_out>;
+ memory-region = <&drm_logo>;
+ route {
+ route_hdmi: route-hdmi {
+ status = "disabled";
+ logo,uboot = "logo.bmp";
+ logo,kernel = "logo_kernel.bmp";
+ logo,mode = "fullscreen";
+ charge_logo,mode = "center";
+ connect = <&vopb_out_hdmi>;
+ };
+
+ route_mipi: route-mipi {
+ status = "disabled";
+ logo,uboot = "logo.bmp";
+ logo,kernel = "logo_kernel.bmp";
+ logo,mode = "fullscreen";
+ charge_logo,mode = "center";
+ connect = <&vopb_out_mipi>;
+ };
+
+ route_edp: route-edp {
+ status = "disabled";
+ logo,uboot = "logo.bmp";
+ logo,kernel = "logo_kernel.bmp";
+ logo,mode = "fullscreen";
+ charge_logo,mode = "center";
+ connect = <&vopb_out_edp>;
+ };
+ };
+};
+
+&i2s2 {
+ #sound-dai-cells = <0>;
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "otg";
+};
+
+&pinctrl {
+ isp {
+ cif_clkout: cif-clkout {
+ rockchip,pins =
+ /*cif_clkout*/
+ <2 11 RK_FUNC_3 &pcfg_pull_none>;
+ };
+
+ isp_dvp_d0d7: isp-dvp-d0d7 {
+ rockchip,pins =
+ /*cif_data0*/
+ <2 0 RK_FUNC_3 &pcfg_pull_none>,
+ /*cif_data1*/
+ <2 1 RK_FUNC_3 &pcfg_pull_none>,
+ /*cif_data2*/
+ <2 2 RK_FUNC_3 &pcfg_pull_none>,
+ /*cif_data3*/
+ <2 3 RK_FUNC_3 &pcfg_pull_none>,
+ /*cif_data4*/
+ <2 4 RK_FUNC_3 &pcfg_pull_none>,
+ /*cif_data5*/
+ <2 5 RK_FUNC_3 &pcfg_pull_none>,
+ /*cif_data6*/
+ <2 6 RK_FUNC_3 &pcfg_pull_none>,
+ /*cif_data7*/
+ <2 7 RK_FUNC_3 &pcfg_pull_none>,
+ /*cif_sync*/
+ <2 8 RK_FUNC_3 &pcfg_pull_none>,
+ /*cif_href*/
+ <2 9 RK_FUNC_3 &pcfg_pull_none>,
+ /*cif_clkin*/
+ <2 10 RK_FUNC_3 &pcfg_pull_none>;
+ };
+
+ isp_shutter: isp-shutter {
+ rockchip,pins =
+ /*SHUTTEREN*/
+ <1 1 RK_FUNC_1 &pcfg_pull_none>,
+ /*SHUTTERTRIG*/
+ <1 0 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ isp_flash_trigger: isp-flash-trigger {
+ /*ISP_FLASHTRIGOU*/
+ rockchip,pins = <1 3 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ isp_prelight: isp-prelight {
+ /*ISP_PRELIGHTTRIG*/
+ rockchip,pins = <1 4 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ isp_flash_trigger_as_gpio: isp_flash_trigger_as_gpio {
+ /*ISP_FLASHTRIGOU*/
+ rockchip,pins =
+ <0 17 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+++ /dev/null
-/*
- * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/input/input.h>
-#include "rk3399.dtsi"
-#include "rk3399-android-next.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
- compatible = "rockchip,rk3399-box","rockchip,rk3399";
-
- vcc1v8_s0: vcc1v8-s0 {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v8_s0";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vcc_sys: vcc-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- vcc_phy: vcc-phy-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_phy";
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc3v3_sys: vcc3v3-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_sys";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- vin-supply = <&vcc_sys>;
- };
-
- vcc5v0_host: vcc5v0-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&host_vbus_drv>;
- regulator-name = "vcc5v0_host";
- regulator-always-on;
- };
-
- vdd_log: vdd-log {
- compatible = "pwm-regulator";
- pwms = <&pwm2 0 25000 0>;
- regulator-name = "vdd_log";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
-
- /* for rockchip boot on */
- rockchip,pwm_id= <2>;
- rockchip,pwm_voltage = <900000>;
-
- vin-supply = <&vcc_sys>;
- };
-
- clkin_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "clkin_gmac";
- #clock-cells = <0>;
- };
-
- spdif-sound {
- status = "okay";
- compatible = "simple-audio-card";
- simple-audio-card,name = "ROCKCHIP,SPDIF";
- simple-audio-card,cpu {
- sound-dai = <&spdif>;
- };
- simple-audio-card,codec {
- sound-dai = <&spdif_out>;
- };
- };
-
- spdif_out: spdif-out {
- status = "okay";
- compatible = "linux,spdif-dit";
- #sound-dai-cells = <0>;
- };
-
- hdmi_sound: hdmi-sound {
- status = "okay";
- compatible = "simple-audio-card";
- simple-audio-card,format = "i2s";
- simple-audio-card,mclk-fs = <256>;
- simple-audio-card,name = "rockchip,hdmi";
- simple-audio-card,cpu {
- sound-dai = <&i2s2>;
- };
- simple-audio-card,codec {
- sound-dai = <&hdmi>;
- };
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rk808 1>;
- clock-names = "ext_clock";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_enable_h>;
-
- /*
- * On the module itself this is one of these (depending
- * on the actual card populated):
- * - SDIO_RESET_L_WL_REG_ON
- * - PDN (power down when low)
- */
- reset-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- };
-
- wireless-wlan {
- compatible = "wlan-platdata";
- rockchip,grf = <&grf>;
- wifi_chip_type = "ap6354";
- sdio_vref = <1800>;
- WIFI,host_wake_irq = <&gpio0 3 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
-
- wireless-bluetooth {
- compatible = "bluetooth-platdata";
- clocks = <&rk808 1>;
- clock-names = "ext_clock";
- /* wifi-bt-power-toggle; */
- uart_rts_gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default", "rts_gpio";
- pinctrl-0 = <&uart0_rts>;
- pinctrl-1 = <&uart0_gpios>;
- /* BT,power_gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; */
- BT,reset_gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
- BT,wake_gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>;
- BT,wake_host_irq = <&gpio0 4 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
-
- test-power {
- status = "okay";
- };
-};
-
-&sdmmc {
- clock-frequency = <100000000>;
- clock-freq-min-max = <100000 100000000>;
- supports-sd;
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- disable-wp;
- num-slots = <1>;
- //sd-uhs-sdr104;
- vqmmc-supply = <&vcc_sd>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- card-detect-delay = <800>;
- status = "okay";
-};
-
-&sdio0 {
- clock-frequency = <100000000>;
- clock-freq-min-max = <200000 100000000>;
- supports-sdio;
- bus-width = <4>;
- disable-wp;
- cap-sd-highspeed;
- cap-sdio-irq;
- keep-power-in-suspend;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- num-slots = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
- sd-uhs-sdr104;
- status = "okay";
-};
-
-&emmc_phy {
- status = "okay";
-};
-
-&sdhci {
- bus-width = <8>;
- mmc-hs400-1_8v;
- supports-emmc;
- non-removable;
- mmc-hs400-enhanced-strobe;
- status = "okay";
-};
-
-&i2s0 {
- status = "okay";
- rockchip,i2s-broken-burst-len;
- rockchip,playback-channels = <8>;
- rockchip,capture-channels = <8>;
- #sound-dai-cells = <0>;
-};
-
-&i2s2 {
- #sound-dai-cells = <0>;
-};
-
-&spdif {
- pinctrl-0 = <&spdif_bus_1>;
- status = "okay";
- #sound-dai-cells = <0>;
-};
-
-&i2c0 {
- status = "okay";
- i2c-scl-rising-time-ns = <168>;
- i2c-scl-falling-time-ns = <4>;
- clock-frequency = <400000>;
-
- vdd_cpu_b: syr827@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- regulator-compatible = "fan53555-reg";
- pinctrl-0 = <&vsel1_gpio>;
- vsel-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
- regulator-name = "vdd_cpu_b";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- fcs,suspend-voltage-selector = <1>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_sys>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: syr828@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- regulator-compatible = "fan53555-reg";
- pinctrl-0 = <&vsel2_gpio>;
- vsel-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- fcs,suspend-voltage-selector = <1>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_sys>;
- regulator-initial-mode = <1>; /* 1:force PWM 2:auto */
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio1>;
- interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
-
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc6-supply = <&vcc_sys>;
- vcc7-supply = <&vcc_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc_sys>;
- vcc10-supply = <&vcc_sys>;
- vcc11-supply = <&vcc_sys>;
- vcc12-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc_1v8>;
-
- regulators {
- vdd_center: DCDC_REG1 {
- regulator-name = "vdd_center";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-name = "vdd_cpu_l";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: DCDC_REG4 {
- regulator-name = "vcc_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc1v8_dvp: LDO_REG1 {
- regulator-name = "vcc1v8_dvp";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcca1v8_hdmi: LDO_REG2 {
- regulator-name = "vcca1v8_hdmi";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcca_1v8: LDO_REG3 {
- regulator-name = "vcca_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_sd: LDO_REG4 {
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc3v0_sd: LDO_REG5 {
- regulator-name = "vcc3v0_sd";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-name = "vcc_1v5";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1500000>;
- };
- };
-
- vcca0v9_hdmi: LDO_REG7 {
- regulator-name = "vcca0v9_hdmi";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <900000>;
- };
- };
-
- vcc_3v0: LDO_REG8 {
- regulator-name = "vcc_3v0";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc3v3_s3: SWITCH_REG1 {
- regulator-name = "vcc3v3_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc3v3_s0: SWITCH_REG2 {
- regulator-name = "vcc3v3_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
- };
- };
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&gpu {
- status = "okay";
- mali-supply = <&vdd_gpu>;
-};
-
-&rga {
- status = "okay";
-};
-
-&threshold {
- temperature = <85000>;
-};
-
-&target {
- temperature = <100000>;
-};
-
-&soc_crit {
- temperature = <105000>;
-};
-
-&tcphy0 {
- extcon = <&fusb0>;
- status = "okay";
-};
-
-&tcphy1 {
- status = "okay";
-};
-
-&tsadc {
- /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-mode = <1>;
- /* tshut polarity 0:LOW 1:HIGH */
- rockchip,hw-tshut-polarity = <1>;
- rockchip,hw-tshut-temp = <110000>;
- status = "okay";
-};
-
-&u2phy0 {
- status = "okay";
- extcon = <&fusb0>;
-
- u2phy0_otg: otg-port {
- status = "okay";
- };
-
- u2phy0_host: host-port {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
- };
-};
-
-&u2phy1 {
- status = "okay";
-
- u2phy1_otg: otg-port {
- status = "okay";
- };
-
- u2phy1_host: host-port {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts>;
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usbdrd3_0 {
- extcon = <&fusb0>;
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbdrd3_1 {
- status = "okay";
-};
-
-&usbdrd_dwc3_1 {
- dr_mode = "host";
- status = "okay";
-};
-
-&pwm2 {
- status = "okay";
-};
-
-&pwm3 {
- status = "okay";
-
- interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH 0>;
- compatible = "rockchip,remotectl-pwm";
- remote_pwm_id = <3>;
- handle_cpu_id = <0>;
-
- ir_key1 {
- rockchip,usercode = <0x4040>;
- rockchip,key_table =
- <0xf2 KEY_REPLY>,
- <0xba KEY_BACK>,
- <0xf4 KEY_UP>,
- <0xf1 KEY_DOWN>,
- <0xef KEY_LEFT>,
- <0xee KEY_RIGHT>,
- <0xbd KEY_HOME>,
- <0xea KEY_VOLUMEUP>,
- <0xe3 KEY_VOLUMEDOWN>,
- <0xe2 KEY_SEARCH>,
- <0xb2 KEY_POWER>,
- <0xbc KEY_MUTE>,
- <0xec KEY_MENU>,
- <0xbf 0x190>,
- <0xe0 0x191>,
- <0xe1 0x192>,
- <0xe9 183>,
- <0xe6 248>,
- <0xe8 185>,
- <0xe7 186>,
- <0xf0 388>,
- <0xbe 0x175>;
- };
-
- ir_key2 {
- rockchip,usercode = <0xff00>;
- rockchip,key_table =
- <0xf9 KEY_HOME>,
- <0xbf KEY_BACK>,
- <0xfb KEY_MENU>,
- <0xaa KEY_REPLY>,
- <0xb9 KEY_UP>,
- <0xe9 KEY_DOWN>,
- <0xb8 KEY_LEFT>,
- <0xea KEY_RIGHT>,
- <0xeb KEY_VOLUMEDOWN>,
- <0xef KEY_VOLUMEUP>,
- <0xf7 KEY_MUTE>,
- <0xe7 KEY_POWER>,
- <0xfc KEY_POWER>,
- <0xa9 KEY_VOLUMEDOWN>,
- <0xa8 KEY_VOLUMEDOWN>,
- <0xe0 KEY_VOLUMEDOWN>,
- <0xa5 KEY_VOLUMEDOWN>,
- <0xab 183>,
- <0xb7 388>,
- <0xe8 388>,
- <0xf8 184>,
- <0xaf 185>,
- <0xed KEY_VOLUMEDOWN>,
- <0xee 186>,
- <0xb3 KEY_VOLUMEDOWN>,
- <0xf1 KEY_VOLUMEDOWN>,
- <0xf2 KEY_VOLUMEDOWN>,
- <0xf3 KEY_SEARCH>,
- <0xb4 KEY_VOLUMEDOWN>,
- <0xbe KEY_SEARCH>;
- };
-
- ir_key3 {
- rockchip,usercode = <0x1dcc>;
- rockchip,key_table =
- <0xee KEY_REPLY>,
- <0xf0 KEY_BACK>,
- <0xf8 KEY_UP>,
- <0xbb KEY_DOWN>,
- <0xef KEY_LEFT>,
- <0xed KEY_RIGHT>,
- <0xfc KEY_HOME>,
- <0xf1 KEY_VOLUMEUP>,
- <0xfd KEY_VOLUMEDOWN>,
- <0xb7 KEY_SEARCH>,
- <0xff KEY_POWER>,
- <0xf3 KEY_MUTE>,
- <0xbf KEY_MENU>,
- <0xf9 0x191>,
- <0xf5 0x192>,
- <0xb3 388>,
- <0xbe KEY_1>,
- <0xba KEY_2>,
- <0xb2 KEY_3>,
- <0xbd KEY_4>,
- <0xf9 KEY_5>,
- <0xb1 KEY_6>,
- <0xfc KEY_7>,
- <0xf8 KEY_8>,
- <0xb0 KEY_9>,
- <0xb6 KEY_0>,
- <0xb5 KEY_BACKSPACE>;
- };
-};
-
-&gmac {
- phy-supply = <&vcc_phy>;
- phy-mode = "rgmii";
- clock_in_out = "input";
- snps,reset-gpio = <&gpio3 15 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- assigned-clocks = <&cru SCLK_RMII_SRC>;
- assigned-clock-parents = <&clkin_gmac>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&rgmii_pins>;
- pinctrl-1 = <&rgmii_sleep_pins>;
- tx_delay = <0x28>;
- rx_delay = <0x11>;
- status = "okay";
-};
-
-&saradc {
- status = "okay";
-};
-
-&i2s2 {
- status = "okay";
-};
-
-&io_domains {
- status = "okay";
-
- bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */
- audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */
- sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */
- gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */
-};
-
-&pinctrl {
- sdio-pwrseq {
- wifi_enable_h: wifi-enable-h {
- rockchip,pins =
- <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- wireless-bluetooth {
- uart0_gpios: uart0-gpios {
- rockchip,pins =
- <2 19 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb2 {
- host_vbus_drv: host-vbus-drv {
- rockchip,pins =
- <4 25 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins =
- <1 21 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- vsel1_gpio: vsel1-gpio {
- rockchip,pins =
- <1 17 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- vsel2_gpio: vsel2-gpio {
- rockchip,pins =
- <1 14 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- gmac {
- rgmii_sleep_pins: rgmii-sleep-pins {
- rockchip,pins =
- <3 15 RK_FUNC_GPIO &pcfg_output_low>;
- };
- };
-};
-
-&pvtm {
- status = "okay";
-};
-
-&pmu_pvtm {
- status = "okay";
-};
-
-&pmu_io_domains {
- status = "okay";
- pmu1830-supply = <&vcc_1v8>;
-};
-
-&vpu {
- status = "okay";
-};
-
-&rkvdec {
- status = "okay";
-};
-
-&rockchip_suspend {
- status = "okay";
- rockchip,sleep-debug-en = <0>;
- rockchip,sleep-mode-config = <
- (0
- | RKPM_SLP_ARMPD
- | RKPM_SLP_PERILPPD
- | RKPM_SLP_DDR_RET
- | RKPM_SLP_PLLPD
- | RKPM_SLP_CENTER_PD
- | RKPM_SLP_AP_PWROFF
- )
- >;
- rockchip,wakeup-config = <
- (0
- | RKPM_GPIO_WKUP_EN
- | RKPM_PWM_WKUP_EN
- )
- >;
- rockchip,pwm-regulator-config = <
- (0
- | PWM2_REGULATOR_EN
- )
- >;
- rockchip,power-ctrl =
- <&gpio1 17 GPIO_ACTIVE_HIGH>,
- <&gpio1 14 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-/*
- * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "rk3399-box-next.dtsi"
-
-/ {
- model = "Rockchip RK3399 Board rev1 (BOX)";
- compatible = "rockchip-box-rev1","rockchip,rk3399-box";
-};
-
-&pinctrl {
- sdio0 {
- sdio0_bus1: sdio0-bus1 {
- rockchip,pins =
- <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>;
- };
-
- sdio0_bus4: sdio0-bus4 {
- rockchip,pins =
- <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>,
- <2 21 RK_FUNC_1 &pcfg_pull_up_20ma>,
- <2 22 RK_FUNC_1 &pcfg_pull_up_20ma>,
- <2 23 RK_FUNC_1 &pcfg_pull_up_20ma>;
- };
-
- sdio0_cmd: sdio0-cmd {
- rockchip,pins =
- <2 24 RK_FUNC_1 &pcfg_pull_up_20ma>;
- };
-
- sdio0_clk: sdio0-clk {
- rockchip,pins =
- <2 25 RK_FUNC_1 &pcfg_pull_none_20ma>;
- };
- };
-
- sdmmc {
- sdmmc_bus1: sdmmc-bus1 {
- rockchip,pins =
- <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>;
- };
-
- sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins =
- <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>,
- <4 9 RK_FUNC_1 &pcfg_pull_up_8ma>,
- <4 10 RK_FUNC_1 &pcfg_pull_up_8ma>,
- <4 11 RK_FUNC_1 &pcfg_pull_up_8ma>;
- };
-
- sdmmc_clk: sdmmc-clk {
- rockchip,pins =
- <4 12 RK_FUNC_1 &pcfg_pull_none_18ma>;
- };
-
- sdmmc_cmd: sdmmc-cmd {
- rockchip,pins =
- <4 13 RK_FUNC_1 &pcfg_pull_up_8ma>;
- };
- };
-
- fusb30x {
- fusb0_int: fusb0-int {
- rockchip,pins =
- <1 2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-};
-
-&i2c4 {
- status = "okay";
- fusb0: fusb30x@22 {
- compatible = "fairchild,fusb302";
- reg = <0x22>;
- pinctrl-names = "default";
- pinctrl-0 = <&fusb0_int>;
- vbus-5v-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
- int-n-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
-};
-
-&cdn_dp {
- status = "okay";
- extcon = <&fusb0>;
-};
-
-&hdmi_in_vopl {
- status = "disabled";
-};
-
-&dp_in_vopb {
- status = "disabled";
-};
--- /dev/null
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3399-box.dtsi"
+
+/ {
+ model = "Rockchip RK3399 Board rev1 (BOX)";
+ compatible = "rockchip-box-rev1","rockchip,rk3399-box";
+};
+
+&pinctrl {
+ sdio0 {
+ sdio0_bus1: sdio0-bus1 {
+ rockchip,pins =
+ <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>;
+ };
+
+ sdio0_bus4: sdio0-bus4 {
+ rockchip,pins =
+ <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>,
+ <2 21 RK_FUNC_1 &pcfg_pull_up_20ma>,
+ <2 22 RK_FUNC_1 &pcfg_pull_up_20ma>,
+ <2 23 RK_FUNC_1 &pcfg_pull_up_20ma>;
+ };
+
+ sdio0_cmd: sdio0-cmd {
+ rockchip,pins =
+ <2 24 RK_FUNC_1 &pcfg_pull_up_20ma>;
+ };
+
+ sdio0_clk: sdio0-clk {
+ rockchip,pins =
+ <2 25 RK_FUNC_1 &pcfg_pull_none_20ma>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_bus1: sdmmc-bus1 {
+ rockchip,pins =
+ <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins =
+ <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>,
+ <4 9 RK_FUNC_1 &pcfg_pull_up_8ma>,
+ <4 10 RK_FUNC_1 &pcfg_pull_up_8ma>,
+ <4 11 RK_FUNC_1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins =
+ <4 12 RK_FUNC_1 &pcfg_pull_none_18ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins =
+ <4 13 RK_FUNC_1 &pcfg_pull_up_8ma>;
+ };
+ };
+
+ fusb30x {
+ fusb0_int: fusb0-int {
+ rockchip,pins =
+ <1 2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&i2c4 {
+ status = "okay";
+ fusb0: fusb30x@22 {
+ compatible = "fairchild,fusb302";
+ reg = <0x22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ vbus-5v-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ int-n-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+};
+
+&cdn_dp {
+ status = "okay";
+ extcon = <&fusb0>;
+};
+
+&hdmi_in_vopl {
+ status = "disabled";
+};
+
+&dp_in_vopb {
+ status = "disabled";
+};
+++ /dev/null
-/*
- * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "rk3399-box-next.dtsi"
-
-/ {
- model = "Rockchip RK3399 Board rev2 (BOX)";
- compatible = "rockchip-box-rev2","rockchip,rk3399-box";
-};
-
-&pinctrl {
- sdio0 {
- sdio0_bus1: sdio0-bus1 {
- rockchip,pins =
- <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>;
- };
-
- sdio0_bus4: sdio0-bus4 {
- rockchip,pins =
- <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>,
- <2 21 RK_FUNC_1 &pcfg_pull_up_20ma>,
- <2 22 RK_FUNC_1 &pcfg_pull_up_20ma>,
- <2 23 RK_FUNC_1 &pcfg_pull_up_20ma>;
- };
-
- sdio0_cmd: sdio0-cmd {
- rockchip,pins =
- <2 24 RK_FUNC_1 &pcfg_pull_up_20ma>;
- };
-
- sdio0_clk: sdio0-clk {
- rockchip,pins =
- <2 25 RK_FUNC_1 &pcfg_pull_none_20ma>;
- };
- };
-
- sdmmc {
- sdmmc_bus1: sdmmc-bus1 {
- rockchip,pins =
- <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>;
- };
-
- sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins =
- <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>,
- <4 9 RK_FUNC_1 &pcfg_pull_up_8ma>,
- <4 10 RK_FUNC_1 &pcfg_pull_up_8ma>,
- <4 11 RK_FUNC_1 &pcfg_pull_up_8ma>;
- };
-
- sdmmc_clk: sdmmc-clk {
- rockchip,pins =
- <4 12 RK_FUNC_1 &pcfg_pull_none_18ma>;
- };
-
- sdmmc_cmd: sdmmc-cmd {
- rockchip,pins =
- <4 13 RK_FUNC_1 &pcfg_pull_up_8ma>;
- };
- };
-
- fusb30x {
- fusb0_int: fusb0-int {
- rockchip,pins =
- <1 2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- pmic {
- vsel1_gpio: vsel1-gpio {
- rockchip,pins =
- <1 18 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-};
-
-&i2c4 {
- status = "okay";
- fusb0: fusb30x@22 {
- compatible = "fairchild,fusb302";
- reg = <0x22>;
- pinctrl-names = "default";
- pinctrl-0 = <&fusb0_int>;
- vbus-5v-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
- int-n-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
-};
-
-&cdn_dp {
- status = "okay";
- extcon = <&fusb0>;
-};
-
-&hdmi_in_vopl {
- status = "disabled";
-};
-
-&dp_in_vopb {
- status = "disabled";
-};
-
-&vdd_cpu_b {
- vsel-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
- fcs,suspend-voltage-selector = <0>;
-};
-
-&rockchip_suspend {
- rockchip,power-ctrl =
- <&gpio1 18 GPIO_ACTIVE_LOW>,
- <&gpio1 14 GPIO_ACTIVE_HIGH>;
-};
--- /dev/null
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3399-box.dtsi"
+
+/ {
+ model = "Rockchip RK3399 Board rev2 (BOX)";
+ compatible = "rockchip-box-rev2","rockchip,rk3399-box";
+};
+
+&pinctrl {
+ sdio0 {
+ sdio0_bus1: sdio0-bus1 {
+ rockchip,pins =
+ <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>;
+ };
+
+ sdio0_bus4: sdio0-bus4 {
+ rockchip,pins =
+ <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>,
+ <2 21 RK_FUNC_1 &pcfg_pull_up_20ma>,
+ <2 22 RK_FUNC_1 &pcfg_pull_up_20ma>,
+ <2 23 RK_FUNC_1 &pcfg_pull_up_20ma>;
+ };
+
+ sdio0_cmd: sdio0-cmd {
+ rockchip,pins =
+ <2 24 RK_FUNC_1 &pcfg_pull_up_20ma>;
+ };
+
+ sdio0_clk: sdio0-clk {
+ rockchip,pins =
+ <2 25 RK_FUNC_1 &pcfg_pull_none_20ma>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_bus1: sdmmc-bus1 {
+ rockchip,pins =
+ <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins =
+ <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>,
+ <4 9 RK_FUNC_1 &pcfg_pull_up_8ma>,
+ <4 10 RK_FUNC_1 &pcfg_pull_up_8ma>,
+ <4 11 RK_FUNC_1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins =
+ <4 12 RK_FUNC_1 &pcfg_pull_none_18ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins =
+ <4 13 RK_FUNC_1 &pcfg_pull_up_8ma>;
+ };
+ };
+
+ fusb30x {
+ fusb0_int: fusb0-int {
+ rockchip,pins =
+ <1 2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pmic {
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins =
+ <1 18 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&i2c4 {
+ status = "okay";
+ fusb0: fusb30x@22 {
+ compatible = "fairchild,fusb302";
+ reg = <0x22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ vbus-5v-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ int-n-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+};
+
+&cdn_dp {
+ status = "okay";
+ extcon = <&fusb0>;
+};
+
+&hdmi_in_vopl {
+ status = "disabled";
+};
+
+&dp_in_vopb {
+ status = "disabled";
+};
+
+&vdd_cpu_b {
+ vsel-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ fcs,suspend-voltage-selector = <0>;
+};
+
+&rockchip_suspend {
+ rockchip,power-ctrl =
+ <&gpio1 18 GPIO_ACTIVE_LOW>,
+ <&gpio1 14 GPIO_ACTIVE_HIGH>;
+};
--- /dev/null
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/input/input.h>
+#include "rk3399.dtsi"
+#include "rk3399-android.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ compatible = "rockchip,rk3399-box","rockchip,rk3399";
+
+ vcc1v8_s0: vcc1v8-s0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vcc_phy: vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_phy";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_vbus_drv>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 0>;
+ regulator-name = "vdd_log";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ /* for rockchip boot on */
+ rockchip,pwm_id= <2>;
+ rockchip,pwm_voltage = <900000>;
+
+ vin-supply = <&vcc_sys>;
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ spdif-sound {
+ status = "okay";
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "ROCKCHIP,SPDIF";
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+ simple-audio-card,codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ spdif_out: spdif-out {
+ status = "okay";
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
+ hdmi_sound: hdmi-sound {
+ status = "okay";
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,name = "rockchip,hdmi";
+ simple-audio-card,cpu {
+ sound-dai = <&i2s2>;
+ };
+ simple-audio-card,codec {
+ sound-dai = <&hdmi>;
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ wireless-wlan {
+ compatible = "wlan-platdata";
+ rockchip,grf = <&grf>;
+ wifi_chip_type = "ap6354";
+ sdio_vref = <1800>;
+ WIFI,host_wake_irq = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ wireless-bluetooth {
+ compatible = "bluetooth-platdata";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ /* wifi-bt-power-toggle; */
+ uart_rts_gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default", "rts_gpio";
+ pinctrl-0 = <&uart0_rts>;
+ pinctrl-1 = <&uart0_gpios>;
+ /* BT,power_gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; */
+ BT,reset_gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ BT,wake_gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+ BT,wake_host_irq = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ test-power {
+ status = "okay";
+ };
+};
+
+&sdmmc {
+ clock-frequency = <100000000>;
+ clock-freq-min-max = <100000 100000000>;
+ supports-sd;
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ num-slots = <1>;
+ //sd-uhs-sdr104;
+ vqmmc-supply = <&vcc_sd>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ card-detect-delay = <800>;
+ status = "okay";
+};
+
+&sdio0 {
+ clock-frequency = <100000000>;
+ clock-freq-min-max = <200000 100000000>;
+ supports-sdio;
+ bus-width = <4>;
+ disable-wp;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ supports-emmc;
+ non-removable;
+ mmc-hs400-enhanced-strobe;
+ status = "okay";
+};
+
+&i2s0 {
+ status = "okay";
+ rockchip,i2s-broken-burst-len;
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <8>;
+ #sound-dai-cells = <0>;
+};
+
+&i2s2 {
+ #sound-dai-cells = <0>;
+};
+
+&spdif {
+ pinctrl-0 = <&spdif_bus_1>;
+ status = "okay";
+ #sound-dai-cells = <0>;
+};
+
+&i2c0 {
+ status = "okay";
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ clock-frequency = <400000>;
+
+ vdd_cpu_b: syr827@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ regulator-compatible = "fan53555-reg";
+ pinctrl-0 = <&vsel1_gpio>;
+ vsel-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: syr828@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ regulator-compatible = "fan53555-reg";
+ pinctrl-0 = <&vsel2_gpio>;
+ vsel-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ regulator-initial-mode = <1>; /* 1:force PWM 2:auto */
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc_sys>;
+ vcc10-supply = <&vcc_sys>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_1v8>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG1 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca1v8_hdmi: LDO_REG2 {
+ regulator-name = "vcca1v8_hdmi";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG3 {
+ regulator-name = "vcca_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sd: LDO_REG4 {
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc3v0_sd: LDO_REG5 {
+ regulator-name = "vcc3v0_sd";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca0v9_hdmi: LDO_REG7 {
+ regulator-name = "vcca0v9_hdmi";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&gpu {
+ status = "okay";
+ mali-supply = <&vdd_gpu>;
+};
+
+&rga {
+ status = "okay";
+};
+
+&threshold {
+ temperature = <85000>;
+};
+
+&target {
+ temperature = <100000>;
+};
+
+&soc_crit {
+ temperature = <105000>;
+};
+
+&tcphy0 {
+ extcon = <&fusb0>;
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ rockchip,hw-tshut-temp = <110000>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+ extcon = <&fusb0>;
+
+ u2phy0_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ extcon = <&fusb0>;
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH 0>;
+ compatible = "rockchip,remotectl-pwm";
+ remote_pwm_id = <3>;
+ handle_cpu_id = <0>;
+
+ ir_key1 {
+ rockchip,usercode = <0x4040>;
+ rockchip,key_table =
+ <0xf2 KEY_REPLY>,
+ <0xba KEY_BACK>,
+ <0xf4 KEY_UP>,
+ <0xf1 KEY_DOWN>,
+ <0xef KEY_LEFT>,
+ <0xee KEY_RIGHT>,
+ <0xbd KEY_HOME>,
+ <0xea KEY_VOLUMEUP>,
+ <0xe3 KEY_VOLUMEDOWN>,
+ <0xe2 KEY_SEARCH>,
+ <0xb2 KEY_POWER>,
+ <0xbc KEY_MUTE>,
+ <0xec KEY_MENU>,
+ <0xbf 0x190>,
+ <0xe0 0x191>,
+ <0xe1 0x192>,
+ <0xe9 183>,
+ <0xe6 248>,
+ <0xe8 185>,
+ <0xe7 186>,
+ <0xf0 388>,
+ <0xbe 0x175>;
+ };
+
+ ir_key2 {
+ rockchip,usercode = <0xff00>;
+ rockchip,key_table =
+ <0xf9 KEY_HOME>,
+ <0xbf KEY_BACK>,
+ <0xfb KEY_MENU>,
+ <0xaa KEY_REPLY>,
+ <0xb9 KEY_UP>,
+ <0xe9 KEY_DOWN>,
+ <0xb8 KEY_LEFT>,
+ <0xea KEY_RIGHT>,
+ <0xeb KEY_VOLUMEDOWN>,
+ <0xef KEY_VOLUMEUP>,
+ <0xf7 KEY_MUTE>,
+ <0xe7 KEY_POWER>,
+ <0xfc KEY_POWER>,
+ <0xa9 KEY_VOLUMEDOWN>,
+ <0xa8 KEY_VOLUMEDOWN>,
+ <0xe0 KEY_VOLUMEDOWN>,
+ <0xa5 KEY_VOLUMEDOWN>,
+ <0xab 183>,
+ <0xb7 388>,
+ <0xe8 388>,
+ <0xf8 184>,
+ <0xaf 185>,
+ <0xed KEY_VOLUMEDOWN>,
+ <0xee 186>,
+ <0xb3 KEY_VOLUMEDOWN>,
+ <0xf1 KEY_VOLUMEDOWN>,
+ <0xf2 KEY_VOLUMEDOWN>,
+ <0xf3 KEY_SEARCH>,
+ <0xb4 KEY_VOLUMEDOWN>,
+ <0xbe KEY_SEARCH>;
+ };
+
+ ir_key3 {
+ rockchip,usercode = <0x1dcc>;
+ rockchip,key_table =
+ <0xee KEY_REPLY>,
+ <0xf0 KEY_BACK>,
+ <0xf8 KEY_UP>,
+ <0xbb KEY_DOWN>,
+ <0xef KEY_LEFT>,
+ <0xed KEY_RIGHT>,
+ <0xfc KEY_HOME>,
+ <0xf1 KEY_VOLUMEUP>,
+ <0xfd KEY_VOLUMEDOWN>,
+ <0xb7 KEY_SEARCH>,
+ <0xff KEY_POWER>,
+ <0xf3 KEY_MUTE>,
+ <0xbf KEY_MENU>,
+ <0xf9 0x191>,
+ <0xf5 0x192>,
+ <0xb3 388>,
+ <0xbe KEY_1>,
+ <0xba KEY_2>,
+ <0xb2 KEY_3>,
+ <0xbd KEY_4>,
+ <0xf9 KEY_5>,
+ <0xb1 KEY_6>,
+ <0xfc KEY_7>,
+ <0xf8 KEY_8>,
+ <0xb0 KEY_9>,
+ <0xb6 KEY_0>,
+ <0xb5 KEY_BACKSPACE>;
+ };
+};
+
+&gmac {
+ phy-supply = <&vcc_phy>;
+ phy-mode = "rgmii";
+ clock_in_out = "input";
+ snps,reset-gpio = <&gpio3 15 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&rgmii_pins>;
+ pinctrl-1 = <&rgmii_sleep_pins>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&saradc {
+ status = "okay";
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+
+ bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */
+ audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */
+ sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */
+ gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */
+};
+
+&pinctrl {
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins =
+ <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wireless-bluetooth {
+ uart0_gpios: uart0-gpios {
+ rockchip,pins =
+ <2 19 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb2 {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins =
+ <4 25 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins =
+ <1 21 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins =
+ <1 17 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins =
+ <1 14 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ gmac {
+ rgmii_sleep_pins: rgmii-sleep-pins {
+ rockchip,pins =
+ <3 15 RK_FUNC_GPIO &pcfg_output_low>;
+ };
+ };
+};
+
+&pvtm {
+ status = "okay";
+};
+
+&pmu_pvtm {
+ status = "okay";
+};
+
+&pmu_io_domains {
+ status = "okay";
+ pmu1830-supply = <&vcc_1v8>;
+};
+
+&vpu {
+ status = "okay";
+};
+
+&rkvdec {
+ status = "okay";
+};
+
+&rockchip_suspend {
+ status = "okay";
+ rockchip,sleep-debug-en = <0>;
+ rockchip,sleep-mode-config = <
+ (0
+ | RKPM_SLP_ARMPD
+ | RKPM_SLP_PERILPPD
+ | RKPM_SLP_DDR_RET
+ | RKPM_SLP_PLLPD
+ | RKPM_SLP_CENTER_PD
+ | RKPM_SLP_AP_PWROFF
+ )
+ >;
+ rockchip,wakeup-config = <
+ (0
+ | RKPM_GPIO_WKUP_EN
+ | RKPM_PWM_WKUP_EN
+ )
+ >;
+ rockchip,pwm-regulator-config = <
+ (0
+ | PWM2_REGULATOR_EN
+ )
+ >;
+ rockchip,power-ctrl =
+ <&gpio1 17 GPIO_ACTIVE_HIGH>,
+ <&gpio1 14 GPIO_ACTIVE_HIGH>;
+};
+++ /dev/null
-/*
- * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "rk3399-evb-rev1.dtsi"
-#include "rk3399-android-next.dtsi"
-
-/ {
- model = "Rockchip RK3399 Evaluation Board v1 (Android)";
- compatible = "rockchip,android", "rockchip,rk3399-evb-rev1", "rockchip,rk3399";
-};
-
-&vdd_log {
- rockchip,pwm_id= <2>;
- rockchip,pwm_voltage = <900000>;
-};
-
-&vdd_center {
- rockchip,pwm_id= <3>;
- rockchip,pwm_voltage = <900000>;
-};
-
-&mipi_dsi {
- status = "okay";
- panel {
- compatible ="simple-panel-dsi";
- reg = <0>;
- backlight = <&backlight>;
- enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
- dsi,flags = <(MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
- MIPI_DSI_MODE_VIDEO_SYNC_PULSE)>;
- dsi,format = <MIPI_DSI_FMT_RGB888>;
- dsi,lanes = <4>;
- status = "okay";
-
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <160000000>;
- hactive = <1200>;
- vactive = <1920>;
- hback-porch = <21>;
- hfront-porch = <120>;
- vback-porch = <18>;
- vfront-porch = <21>;
- hsync-len = <20>;
- vsync-len = <3>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <0>;
- pixelclk-active = <0>;
- };
- };
- };
-};
-
-&route_mipi {
- status = "okay";
-};
--- /dev/null
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3399-evb-rev1.dtsi"
+#include "rk3399-android.dtsi"
+
+/ {
+ model = "Rockchip RK3399 Evaluation Board v1 (Android)";
+ compatible = "rockchip,android", "rockchip,rk3399-evb-rev1", "rockchip,rk3399";
+};
+
+&vdd_log {
+ rockchip,pwm_id= <2>;
+ rockchip,pwm_voltage = <900000>;
+};
+
+&vdd_center {
+ rockchip,pwm_id= <3>;
+ rockchip,pwm_voltage = <900000>;
+};
+
+&mipi_dsi {
+ status = "okay";
+ panel {
+ compatible ="simple-panel-dsi";
+ reg = <0>;
+ backlight = <&backlight>;
+ enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ dsi,flags = <(MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_MODE_VIDEO_SYNC_PULSE)>;
+ dsi,format = <MIPI_DSI_FMT_RGB888>;
+ dsi,lanes = <4>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <160000000>;
+ hactive = <1200>;
+ vactive = <1920>;
+ hback-porch = <21>;
+ hfront-porch = <120>;
+ vback-porch = <18>;
+ vfront-porch = <21>;
+ hsync-len = <20>;
+ vsync-len = <3>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <0>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&route_mipi {
+ status = "okay";
+};
+++ /dev/null
-/*
- * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "rk3399-evb-rev2.dtsi"
-#include "rk3399-android-next.dtsi"
-
-/ {
- model = "Rockchip RK3399 Evaluation Board v2 (Android)";
- compatible = "rockchip,android", "rockchip,rk3399-evb-rev2", "rockchip,rk3399";
-};
-
-&vdd_center {
- rockchip,pwm_id= <3>;
- rockchip,pwm_voltage = <900000>;
-};
-
-&i2s2 {
- status = "okay";
-};
-
-&spdif {
- status = "okay";
-};
-
-&spdif_out {
- status = "okay";
-};
-
-&spdif_sound {
- status = "okay";
-};
-
-&mipi_dsi {
- status = "okay";
- panel {
- compatible ="simple-panel-dsi";
- reg = <0>;
- backlight = <&backlight>;
- enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
- dsi,flags = <(MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
- MIPI_DSI_MODE_VIDEO_SYNC_PULSE)>;
- dsi,format = <MIPI_DSI_FMT_RGB888>;
- dsi,lanes = <4>;
- status = "okay";
-
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <160000000>;
- hactive = <1200>;
- vactive = <1920>;
- hback-porch = <21>;
- hfront-porch = <120>;
- vback-porch = <18>;
- vfront-porch = <21>;
- hsync-len = <20>;
- vsync-len = <3>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <0>;
- pixelclk-active = <0>;
- };
- };
- };
-};
-
-&route_mipi {
- status = "okay";
-};
--- /dev/null
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3399-evb-rev2.dtsi"
+#include "rk3399-android.dtsi"
+
+/ {
+ model = "Rockchip RK3399 Evaluation Board v2 (Android)";
+ compatible = "rockchip,android", "rockchip,rk3399-evb-rev2", "rockchip,rk3399";
+};
+
+&vdd_center {
+ rockchip,pwm_id= <3>;
+ rockchip,pwm_voltage = <900000>;
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&spdif {
+ status = "okay";
+};
+
+&spdif_out {
+ status = "okay";
+};
+
+&spdif_sound {
+ status = "okay";
+};
+
+&mipi_dsi {
+ status = "okay";
+ panel {
+ compatible ="simple-panel-dsi";
+ reg = <0>;
+ backlight = <&backlight>;
+ enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ dsi,flags = <(MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_MODE_VIDEO_SYNC_PULSE)>;
+ dsi,format = <MIPI_DSI_FMT_RGB888>;
+ dsi,lanes = <4>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <160000000>;
+ hactive = <1200>;
+ vactive = <1920>;
+ hback-porch = <21>;
+ hfront-porch = <120>;
+ vback-porch = <18>;
+ vfront-porch = <21>;
+ hsync-len = <20>;
+ vsync-len = <3>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <0>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&route_mipi {
+ status = "okay";
+};
+++ /dev/null
-/*
- * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "rk3399-evb-rev3.dtsi"
-#include "rk3399-android-next.dtsi"
-
-/ {
- model = "Rockchip RK3399 Evaluation Board v3 edp (Android)";
- compatible = "rockchip,android", "rockchip,rk3399-evb-rev3-next", "rockchip,rk3399";
-
- edp_panel: edp-panel {
- compatible = "lg,lp079qx1-sp0v", "panel-simple";
- backlight = <&backlight>;
- power-supply = <&vcc3v3_s0>;
- enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-
- ports {
- panel_in_edp: endpoint {
- remote-endpoint = <&edp_out_panel>;
- };
- };
- };
-};
-
-&i2s2 {
- status = "okay";
-};
-
->9xx {
- status = "disabled";
-};
-
-&i2c4 {
- gsl3673: gsl3673@40 {
- compatible = "GSL,GSL3673";
- reg = <0x40>;
- screen_max_x = <1536>;
- screen_max_y = <2048>;
- irq_gpio_number = <&gpio1 20 IRQ_TYPE_LEVEL_LOW>;
- rst_gpio_number = <&gpio4 22 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&edp {
- status = "okay";
-
- ports {
- edp_out: port@1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- edp_out_panel: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_in_edp>;
- };
- };
- };
-};
-
-&route_edp {
- status = "okay";
-};
-
-&vpu {
- status = "okay";
-};
-
-&rkvdec {
- status = "okay";
-};
--- /dev/null
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3399-evb-rev3.dtsi"
+#include "rk3399-android.dtsi"
+
+/ {
+ model = "Rockchip RK3399 Evaluation Board v3 edp (Android)";
+ compatible = "rockchip,android", "rockchip,rk3399-evb-rev3-next", "rockchip,rk3399";
+
+ edp_panel: edp-panel {
+ compatible = "lg,lp079qx1-sp0v", "panel-simple";
+ backlight = <&backlight>;
+ power-supply = <&vcc3v3_s0>;
+ enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&edp_out_panel>;
+ };
+ };
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+>9xx {
+ status = "disabled";
+};
+
+&i2c4 {
+ gsl3673: gsl3673@40 {
+ compatible = "GSL,GSL3673";
+ reg = <0x40>;
+ screen_max_x = <1536>;
+ screen_max_y = <2048>;
+ irq_gpio_number = <&gpio1 20 IRQ_TYPE_LEVEL_LOW>;
+ rst_gpio_number = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&edp {
+ status = "okay";
+
+ ports {
+ edp_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ edp_out_panel: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_in_edp>;
+ };
+ };
+ };
+};
+
+&route_edp {
+ status = "okay";
+};
+
+&vpu {
+ status = "okay";
+};
+
+&rkvdec {
+ status = "okay";
+};
+++ /dev/null
-/*
- * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "rk3399.dtsi"
-#include "rk3399-android-next.dtsi"
-#include "rk3399-opp.dtsi"
-#include <dt-bindings/sensor-dev.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
- compatible = "rockchip,rk3399-mid", "rockchip,rk3399";
-
- edp_panel: edp-panel {
- compatible = "lg,lp079qx1-sp0v", "panel-simple";
- bus-format = <MEDIA_BUS_FMT_RGB666_1X18>;
- backlight = <&backlight>;
- power-supply = <&vcc3v3_s0>;
- enable-gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
- ports {
- panel_in_edp: endpoint {
- remote-endpoint = <&edp_out_panel>;
- };
- };
- };
-
- hall_sensor: hall-mh248 {
- compatible = "hall-mh248";
- pinctrl-names = "default";
- pinctrl-0 = <&mh248_irq_gpio>;
- irq-gpio = <&gpio1 2 IRQ_TYPE_EDGE_BOTH>;
- hall-active = <1>;
- status = "okay";
- };
-
- vcc_sys: vcc-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3900000>;
- regulator-max-microvolt = <3900000>;
- };
-
- vcc3v3_sys: vcc3v3-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vcc5v0_host: vcc5v0-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&host_vbus_drv>;
- regulator-name = "vcc5v0_host";
- regulator-always-on;
- };
-
- vdd_log: vdd-log {
- compatible = "pwm-regulator";
- pwms = <&pwm2 0 25000 0>;
- rockchip,pwm_id= <2>;
- rockchip,pwm_voltage = <900000>;
- regulator-name = "vdd_log";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm0 0 25000 PWM_POLARITY_INVERTED>;
- brightness-levels = <
- 0 1 51 52 52 53 53 54
- 54 55 55 56 56 57 57 58
- 58 59 59 60 61 61 62 63
- 63 64 65 65 66 67 67 68
- 69 69 70 71 71 72 73 73
- 74 75 75 76 77 77 78 79
- 79 80 80 81 81 82 83 83
- 84 85 86 86 87 88 89 89
- 90 91 92 92 93 94 95 95
- 96 97 98 98 99 100 101 101
- 102 103 104 104 105 106 107 107
- 108 109 110 110 111 112 113 113
- 114 115 116 116 117 118 119 119
- 120 121 122 122 123 124 125 125
- 126 127 128 128 129 130 131 131
- 132 133 134 134 135 136 137 137
- 138 139 140 140 141 142 143 143
- 144 145 146 146 147 148 149 149
- 150 151 152 152 153 154 155 155
- 156 157 158 158 159 160 161 161
- 162 163 164 164 165 166 167 167
- 168 169 170 170 171 172 173 173
- 174 175 176 176 177 178 179 179
- 180 181 182 182 183 184 185 185
- 186 187 188 188 189 190 191 191
- 216 217 218 218 219 220 221 221
- 222 223 224 224 225 226 227 227
- 228 229 230 230 231 232 233 233
- 234 235 236 236 237 238 239 239
- 240 241 242 242 243 244 245 245
- 246 247 248 248 249 250 251 251
- 252 253 254 254 255 255 255 255>;
- default-brightness-level = <200>;
- enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
- };
-
- vcc_phy: vcc-phy-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_phy";
- regulator-always-on;
- regulator-boot-on;
- };
-
- es8316-sound {
- compatible = "simple-audio-card";
- simple-audio-card,format = "i2s";
- simple-audio-card,name = "rockchip,es8316-codec";
- simple-audio-card,mclk-fs = <256>;
- simple-audio-card,widgets =
- "Microphone", "Mic Jack",
- "Headphone", "Headphone Jack";
- simple-audio-card,routing =
- "Mic Jack", "MICBIAS1",
- "IN1P", "Mic Jack",
- "Headphone Jack", "HPOL",
- "Headphone Jack", "HPOR";
- simple-audio-card,cpu {
- sound-dai = <&i2s0>;
- };
- simple-audio-card,codec {
- sound-dai = <&es8316>;
- };
- };
-
- spdif-sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "rockchip,spdif";
- simple-audio-card,cpu {
- sound-dai = <&spdif>;
- };
- simple-audio-card,codec {
- sound-dai = <&spdif_out>;
- };
- };
-
- spdif_out: spdif-out {
- compatible = "linux,spdif-dit";
- #sound-dai-cells = <0>;
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rk818 1>;
- clock-names = "ext_clock";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_enable_h>;
-
- /*
- * On the module itself this is one of these (depending
- * on the actual card populated):
- * - SDIO_RESET_L_WL_REG_ON
- * - PDN (power down when low)
- */
- reset-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; /* GPIO0_B2 */
- };
-
- wireless-wlan {
- compatible = "wlan-platdata";
- rockchip,grf = <&grf>;
- wifi_chip_type = "ap6354";
- sdio_vref = <1800>;
- WIFI,host_wake_irq = <&gpio0 3 GPIO_ACTIVE_HIGH>; /* GPIO0_a3 */
- status = "okay";
- };
-
- wireless-bluetooth {
- compatible = "bluetooth-platdata";
- clocks = <&rk818 1>;
- clock-names = "ext_clock";
- //wifi-bt-power-toggle;
- uart_rts_gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; /* GPIO2_C3 */
- pinctrl-names = "default", "rts_gpio";
- pinctrl-0 = <&uart0_rts>;
- pinctrl-1 = <&uart0_gpios>;
- //BT,power_gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; /* GPIOx_xx */
- BT,reset_gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; /* GPIO0_B1 */
- BT,wake_gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>; /* GPIO2_D2 */
- BT,wake_host_irq = <&gpio0 4 GPIO_ACTIVE_HIGH>; /* GPIO0_A4 */
- status = "okay";
- };
-
- uboot-charge {
- compatible = "rockchip,uboot-charge";
- rockchip,uboot-charge-on = <0>;
- rockchip,android-charge-on = <1>;
- };
-
- vibrator {
- compatible = "rk-vibrator-gpio";
- vibrator-gpio = <&gpio4 30 GPIO_ACTIVE_LOW>;
- status = "okay";
- };
-
- rk_headset {
- compatible = "rockchip_headset";
- headset_gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&hp_det>;
- io-channels = <&saradc 2>;
- };
-};
-
-&rk_key {
- compatible = "rockchip,key";
- status = "okay";
-
- io-channels = <&saradc 1>;
-
- vol-up-key {
- linux,code = <114>;
- label = "volume up";
- rockchip,adc_value = <1>;
- };
-
- vol-down-key {
- linux,code = <115>;
- label = "volume down";
- rockchip,adc_value = <170>;
- };
-
- power-key {
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
- linux,code = <116>;
- label = "power";
- gpio-key,wakeup;
- };
-
- menu-key {
- linux,code = <59>;
- label = "menu";
- rockchip,adc_value = <746>;
- };
-
- home-key {
- linux,code = <102>;
- label = "home";
- rockchip,adc_value = <355>;
- };
-
- back-key {
- linux,code = <158>;
- label = "back";
- rockchip,adc_value = <560>;
- };
-
- camera-key {
- linux,code = <212>;
- label = "camera";
- rockchip,adc_value = <450>;
- };
-};
-
-&sdmmc {
- clock-frequency = <50000000>;
- clock-freq-min-max = <400000 150000000>;
- supports-sd;
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- disable-wp;
- num-slots = <1>;
- //sd-uhs-sdr104;
- vqmmc-supply = <&vcc_sd>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- status = "okay";
-};
-
-&sdio0 {
- clock-frequency = <150000000>;
- clock-freq-min-max = <200000 150000000>;
- supports-sdio;
- bus-width = <4>;
- disable-wp;
- cap-sd-highspeed;
- cap-sdio-irq;
- keep-power-in-suspend;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- num-slots = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
- sd-uhs-sdr104;
- status = "okay";
-};
-
-&emmc_phy {
- status = "okay";
-};
-
-&sdhci {
- bus-width = <8>;
- mmc-hs400-1_8v;
- supports-emmc;
- non-removable;
- keep-power-in-suspend;
- mmc-hs400-enhanced-strobe;
- status = "okay";
-};
-
-&i2s0 {
- status = "okay";
- rockchip,i2s-broken-burst-len;
- rockchip,playback-channels = <8>;
- rockchip,capture-channels = <8>;
- #sound-dai-cells = <0>;
-};
-
-&i2s2 {
- #sound-dai-cells = <0>;
-};
-
-&spdif {
- status = "okay";
- #sound-dai-cells = <0>;
-};
-
-&i2c0 {
- status = "okay";
- i2c-scl-rising-time-ns = <180>;
- i2c-scl-falling-time-ns = <30>;
- clock-frequency = <400000>;
-
- vdd_cpu_b: syr837@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- vin-supply = <&vcc_sys>;
- regulator-compatible = "fan53555-reg";
- pinctrl-0 = <&vsel1_gpio>;
- vsel-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
- regulator-name = "vdd_cpu_b";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- fcs,suspend-voltage-selector = <1>;
- regulator-always-on;
- regulator-initial-state = <3>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: syr828@41 {
- compatible = "silergy,syr828";
- status = "okay";
- reg = <0x41>;
- vin-supply = <&vcc_sys>;
- regulator-compatible = "fan53555-reg";
- pinctrl-0 = <&vsel2_gpio>;
- vsel-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <735000>;
- regulator-max-microvolt = <1400000>;
- regulator-ramp-delay = <1000>;
- fcs,suspend-voltage-selector = <1>;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- rk818: pmic@1c {
- compatible = "rockchip,rk818";
- status = "okay";
- reg = <0x1c>;
- clock-output-names = "xin32k", "wifibt_32kin";
- interrupt-parent = <&gpio1>;
- interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- rk818,support_dc_chg = <1>;/*1: dc chg; 0:usb chg*/
- wakeup-source;
- extcon = <&fusb0>;
- #clock-cells = <1>;
-
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc6-supply = <&vcc_sys>;
- vcc7-supply = <&vcc3v3_sys>;
- vcc8-supply = <&vcc_sys>;
- vcc9-supply = <&vcc3v3_sys>;
-
- regulators {
- vdd_cpu_l: DCDC_REG1 {
- regulator-name = "vdd_cpu_l";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_center: DCDC_REG2 {
- regulator-name = "vdd_center";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: DCDC_REG4 {
- regulator-name = "vcc_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcca3v0_codec: LDO_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vcca3v0_codec";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v0_tp: LDO_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vcc3v0_tp";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcca1v8_codec: LDO_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcca1v8_codec";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_power_on: LDO_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_power_on";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_3v0: LDO_REG5 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vcc_3v0";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-name = "vcc_1v5";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1500000>;
- };
- };
-
- vcc1v8_dvp: LDO_REG7 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc1v8_dvp";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v3_s3: LDO_REG8 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc3v3_s3";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_sd: LDO_REG9 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_sd";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc3v3_s0: SWITCH_REG {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc3v3_s0";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
- };
-
- battery {
- compatible = "rk818-battery";
- ocv_table = <3400 3675 3689 3716 3740 3756 3768 3780
- 3793 3807 3827 3853 3896 3937 3974 4007 4066
- 4110 4161 4217 4308>;
- design_capacity = <7916>;
- design_qmax = <8708>;
- bat_res = <65>;
- max_input_current = <3000>;
- max_chrg_current = <3000>;
- max_chrg_voltage = <4350>;
- sleep_enter_current = <300>;
- sleep_exit_current = <300>;
- power_off_thresd = <3400>;
- zero_algorithm_vol = <3950>;
- fb_temperature = <105>;
- sample_res = <20>;
- max_soc_offset = <60>;
- energy_mode = <0>;
- monitor_sec = <5>;
- virtual_power = <0>;
- power_dc2otg = <0>;
- };
- };
-};
-
-&i2c1 {
- status = "okay";
- i2c-scl-rising-time-ns = <140>;
- i2c-scl-falling-time-ns = <30>;
-
- es8316: es8316@10 {
- #sound-dai-cells = <0>;
- compatible = "everest,es8316";
- reg = <0x11>;
- clocks = <&cru SCLK_I2S_8CH_OUT>;
- clock-names = "mclk";
- spk-con-gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&i2c4 {
- status = "okay";
- i2c-scl-rising-time-ns = <345>;
- i2c-scl-falling-time-ns = <11>;
- clock-frequency = <400000>;
-
- lsm330_accel@1e {
- status = "okay";
- compatible = "lsm330_acc";
- pinctrl-names = "default";
- pinctrl-0 = <&lsm330a_irq_gpio>;
- reg = <0x1e>;
- irq-gpio = <&gpio2 27 IRQ_TYPE_EDGE_RISING>;
- type = <SENSOR_TYPE_ACCEL>;
- irq_enable = <1>;
- poll_delay_ms = <30>;
- power-off-in-suspend = <1>;
- layout = <4>;
- };
-
- lsm330_gyro@6a {
- status = "okay";
- compatible = "lsm330_gyro";
- pinctrl-names = "default";
- pinctrl-0 = <&lsm330g_irq_gpio>;
- reg = <0x6a>;
- irq-gpio = <&gpio1 20 IRQ_TYPE_EDGE_RISING>;
- type = <SENSOR_TYPE_GYROSCOPE>;
- irq_enable = <0>;
- power-off-in-suspend = <1>;
- poll_delay_ms = <30>;
- };
-
- mpu6500@68 {
- status = "disabled";
- compatible = "invensense,mpu6500";
- pinctrl-names = "default";
- pinctrl-0 = <&mpu6500_irq_gpio>;
- reg = <0x68>;
- irq-gpio = <&gpio2 27 IRQ_TYPE_EDGE_RISING>;
- mpu-int_config = <0x10>;
- mpu-level_shifter = <0>;
- mpu-orientation = <1 0 0 0 1 0 0 0 1>;
- orientation-x= <1>;
- orientation-y= <1>;
- orientation-z= <0>;
- support-hw-poweroff = <1>;
- mpu-debug = <1>;
- };
-
- sensor@0d {
- status = "okay";
- compatible = "ak8963";
- pinctrl-names = "default";
- pinctrl-0 = <&ak8963_irq_gpio>;
- reg = <0x0d>;
- type = <SENSOR_TYPE_COMPASS>;
- irq-gpio = <&gpio2 28 IRQ_TYPE_EDGE_RISING>;
- irq_enable = <0>;
- poll_delay_ms = <30>;
- layout = <3>;
- };
-
- sensor@10 {
- status = "okay";
- compatible = "capella,light_cm3218";
- pinctrl-names = "default";
- pinctrl-0 = <&cm3218_irq_gpio>;
- reg = <0x10>;
- type = <SENSOR_TYPE_LIGHT>;
- irq-gpio = <&gpio4 24 IRQ_TYPE_EDGE_FALLING>;
- irq_enable = <1>;
- poll_delay_ms = <30>;
- };
-
- fusb0: fusb30x@22 {
- compatible = "fairchild,fusb302";
- reg = <0x22>;
- pinctrl-names = "default";
- pinctrl-0 = <&fusb0_int>;
- int-n-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
-};
-
-&i2c5 {
- status = "okay";
- i2c-scl-rising-time-ns = <150>;
- i2c-scl-falling-time-ns = <30>;
- clock-frequency = <400000>;
-
- gt9xx: gt9xx@14 {
- compatible = "goodix,gt9xx";
- reg = <0x14>;
- touch-gpio = <&gpio3 12 IRQ_TYPE_LEVEL_LOW>;
- reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
- max-x = <1536>;
- max-y = <2048>;
- tp-size = <970>;
- tp-supply = <&vcc3v0_tp>;
- };
-};
-
-&io_domains {
- status = "okay";
-
- bt656-supply = <&vcc1v8_dvp>;
- audio-supply = <&vcca1v8_codec>;
- sdmmc-supply = <&vcc_sd>;
- gpio1830-supply = <&vcc_3v0>;
-};
-
-&isp0 {
- status = "okay";
-};
-
-&isp1 {
- status = "okay";
-};
-
-&isp0_mmu {
- status = "okay";
-};
-
-&isp1_mmu {
- status = "okay";
-};
-
-&vpu {
- status = "okay";
-};
-
-&rkvdec {
- status = "okay";
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&gpu {
- status = "okay";
- mali-supply = <&vdd_gpu>;
-};
-
-&rga {
- status = "okay";
-};
-
-&spi1 {
- status = "disabled";
- max-freq = <50000000>;
- mpu6500@0 {
- status = "disabled";
- compatible = "inv-spi,mpu6500";
- pinctrl-names = "default";
- pinctrl-0 = <&mpu6500_irq_gpio>;
- irq-gpio = <&gpio2 27 IRQ_TYPE_EDGE_RISING>;
- reg = <0>;
- spi-max-frequency = <1000000>;
- spi-cpha;
- spi-cpol;
- mpu-int_config = <0x00>;
- mpu-level_shifter = <0>;
- mpu-orientation = <1 0 0 0 1 0 0 0 1>;
- orientation-x= <1>;
- orientation-y= <0>;
- orientation-z= <1>;
- support-hw-poweroff = <1>;
- mpu-debug = <1>;
- };
-};
-
-&tcphy0 {
- extcon = <&fusb0>;
- status = "okay";
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
- status = "okay";
-};
-
-&u2phy0 {
- status = "okay";
- extcon = <&fusb0>;
-
- u2phy0_otg: otg-port {
- status = "okay";
- };
-
- u2phy0_host: host-port {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts>;
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usbdrd3_0 {
- extcon = <&fusb0>;
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- status = "okay";
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&pwm2 {
- status = "okay";
-};
-
-&saradc {
- status = "okay";
-};
-
-&pinctrl {
- sdio-pwrseq {
- wifi_enable_h: wifi-enable-h {
- rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- wireless-bluetooth {
- uart0_gpios: uart0-gpios {
- rockchip,pins = <2 19 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins =
- <1 21 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- pmic_dvs2: pmic-dvs2 {
- rockchip,pins =
- <1 18 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- vsel1_gpio: vsel1-gpio {
- rockchip,pins =
- <1 17 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- vsel2_gpio: vsel2-gpio {
- rockchip,pins =
- <1 14 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- hallsensor {
- mh248_irq_gpio: mh248-irq-gpio {
- rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- headphone {
- hp_det: hp-det {
- rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- lsm330_a {
- lsm330a_irq_gpio: lsm330a-irq-gpio {
- rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- lsm330_g {
- lsm330g_irq_gpio: lsm330g-irq-gpio {
- rockchip,pins = <1 20 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- mpu6500 {
- mpu6500_irq_gpio: mpu6500-irq-gpio {
- rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- ak8963 {
- ak8963_irq_gpio: ak8963-irq-gpio {
- rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- cm3218 {
- cm3218_irq_gpio: cm3218-irq-gpio {
- rockchip,pins = <4 24 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- usb2 {
- host_vbus_drv: host-vbus-drv {
- rockchip,pins =
- <4 25 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- fusb30x {
- fusb0_int: fusb0-int {
- rockchip,pins =
- <1 1 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-};
-
-&edp {
- status = "okay";
- ports {
- edp_out: port@1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- edp_out_panel: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_in_edp>;
- };
- };
- };
-};
-
-&edp_in_vopl {
- status = "disabled";
-};
-
-&hdmi {
- status = "disabled";
-};
-
-&cdn_dp {
- status = "okay";
- extcon = <&fusb0>;
- phys = <&tcphy0_dp>;
-};
-
-&dp_in_vopb {
- status = "disabled";
-};
-
-&pmu_io_domains {
- status = "okay";
- pmu1830-supply = <&vcc_1v8>;
-};
-
-&route_edp {
- status = "okay";
- logo,mode = "center";
-};
--- /dev/null
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3399.dtsi"
+#include "rk3399-android.dtsi"
+#include "rk3399-opp.dtsi"
+#include <dt-bindings/sensor-dev.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ compatible = "rockchip,rk3399-mid", "rockchip,rk3399";
+
+ edp_panel: edp-panel {
+ compatible = "lg,lp079qx1-sp0v", "panel-simple";
+ bus-format = <MEDIA_BUS_FMT_RGB666_1X18>;
+ backlight = <&backlight>;
+ power-supply = <&vcc3v3_s0>;
+ enable-gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+ ports {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&edp_out_panel>;
+ };
+ };
+ };
+
+ hall_sensor: hall-mh248 {
+ compatible = "hall-mh248";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mh248_irq_gpio>;
+ irq-gpio = <&gpio1 2 IRQ_TYPE_EDGE_BOTH>;
+ hall-active = <1>;
+ status = "okay";
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3900000>;
+ regulator-max-microvolt = <3900000>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_vbus_drv>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 0>;
+ rockchip,pwm_id= <2>;
+ rockchip,pwm_voltage = <900000>;
+ regulator-name = "vdd_log";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm0 0 25000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <
+ 0 1 51 52 52 53 53 54
+ 54 55 55 56 56 57 57 58
+ 58 59 59 60 61 61 62 63
+ 63 64 65 65 66 67 67 68
+ 69 69 70 71 71 72 73 73
+ 74 75 75 76 77 77 78 79
+ 79 80 80 81 81 82 83 83
+ 84 85 86 86 87 88 89 89
+ 90 91 92 92 93 94 95 95
+ 96 97 98 98 99 100 101 101
+ 102 103 104 104 105 106 107 107
+ 108 109 110 110 111 112 113 113
+ 114 115 116 116 117 118 119 119
+ 120 121 122 122 123 124 125 125
+ 126 127 128 128 129 130 131 131
+ 132 133 134 134 135 136 137 137
+ 138 139 140 140 141 142 143 143
+ 144 145 146 146 147 148 149 149
+ 150 151 152 152 153 154 155 155
+ 156 157 158 158 159 160 161 161
+ 162 163 164 164 165 166 167 167
+ 168 169 170 170 171 172 173 173
+ 174 175 176 176 177 178 179 179
+ 180 181 182 182 183 184 185 185
+ 186 187 188 188 189 190 191 191
+ 216 217 218 218 219 220 221 221
+ 222 223 224 224 225 226 227 227
+ 228 229 230 230 231 232 233 233
+ 234 235 236 236 237 238 239 239
+ 240 241 242 242 243 244 245 245
+ 246 247 248 248 249 250 251 251
+ 252 253 254 254 255 255 255 255>;
+ default-brightness-level = <200>;
+ enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ vcc_phy: vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_phy";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ es8316-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "rockchip,es8316-codec";
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Mic Jack", "MICBIAS1",
+ "IN1P", "Mic Jack",
+ "Headphone Jack", "HPOL",
+ "Headphone Jack", "HPOR";
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0>;
+ };
+ simple-audio-card,codec {
+ sound-dai = <&es8316>;
+ };
+ };
+
+ spdif-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "rockchip,spdif";
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+ simple-audio-card,codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ spdif_out: spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk818 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; /* GPIO0_B2 */
+ };
+
+ wireless-wlan {
+ compatible = "wlan-platdata";
+ rockchip,grf = <&grf>;
+ wifi_chip_type = "ap6354";
+ sdio_vref = <1800>;
+ WIFI,host_wake_irq = <&gpio0 3 GPIO_ACTIVE_HIGH>; /* GPIO0_a3 */
+ status = "okay";
+ };
+
+ wireless-bluetooth {
+ compatible = "bluetooth-platdata";
+ clocks = <&rk818 1>;
+ clock-names = "ext_clock";
+ //wifi-bt-power-toggle;
+ uart_rts_gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; /* GPIO2_C3 */
+ pinctrl-names = "default", "rts_gpio";
+ pinctrl-0 = <&uart0_rts>;
+ pinctrl-1 = <&uart0_gpios>;
+ //BT,power_gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; /* GPIOx_xx */
+ BT,reset_gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; /* GPIO0_B1 */
+ BT,wake_gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>; /* GPIO2_D2 */
+ BT,wake_host_irq = <&gpio0 4 GPIO_ACTIVE_HIGH>; /* GPIO0_A4 */
+ status = "okay";
+ };
+
+ uboot-charge {
+ compatible = "rockchip,uboot-charge";
+ rockchip,uboot-charge-on = <0>;
+ rockchip,android-charge-on = <1>;
+ };
+
+ vibrator {
+ compatible = "rk-vibrator-gpio";
+ vibrator-gpio = <&gpio4 30 GPIO_ACTIVE_LOW>;
+ status = "okay";
+ };
+
+ rk_headset {
+ compatible = "rockchip_headset";
+ headset_gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_det>;
+ io-channels = <&saradc 2>;
+ };
+};
+
+&rk_key {
+ compatible = "rockchip,key";
+ status = "okay";
+
+ io-channels = <&saradc 1>;
+
+ vol-up-key {
+ linux,code = <114>;
+ label = "volume up";
+ rockchip,adc_value = <1>;
+ };
+
+ vol-down-key {
+ linux,code = <115>;
+ label = "volume down";
+ rockchip,adc_value = <170>;
+ };
+
+ power-key {
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ linux,code = <116>;
+ label = "power";
+ gpio-key,wakeup;
+ };
+
+ menu-key {
+ linux,code = <59>;
+ label = "menu";
+ rockchip,adc_value = <746>;
+ };
+
+ home-key {
+ linux,code = <102>;
+ label = "home";
+ rockchip,adc_value = <355>;
+ };
+
+ back-key {
+ linux,code = <158>;
+ label = "back";
+ rockchip,adc_value = <560>;
+ };
+
+ camera-key {
+ linux,code = <212>;
+ label = "camera";
+ rockchip,adc_value = <450>;
+ };
+};
+
+&sdmmc {
+ clock-frequency = <50000000>;
+ clock-freq-min-max = <400000 150000000>;
+ supports-sd;
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ num-slots = <1>;
+ //sd-uhs-sdr104;
+ vqmmc-supply = <&vcc_sd>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ status = "okay";
+};
+
+&sdio0 {
+ clock-frequency = <150000000>;
+ clock-freq-min-max = <200000 150000000>;
+ supports-sdio;
+ bus-width = <4>;
+ disable-wp;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ supports-emmc;
+ non-removable;
+ keep-power-in-suspend;
+ mmc-hs400-enhanced-strobe;
+ status = "okay";
+};
+
+&i2s0 {
+ status = "okay";
+ rockchip,i2s-broken-burst-len;
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <8>;
+ #sound-dai-cells = <0>;
+};
+
+&i2s2 {
+ #sound-dai-cells = <0>;
+};
+
+&spdif {
+ status = "okay";
+ #sound-dai-cells = <0>;
+};
+
+&i2c0 {
+ status = "okay";
+ i2c-scl-rising-time-ns = <180>;
+ i2c-scl-falling-time-ns = <30>;
+ clock-frequency = <400000>;
+
+ vdd_cpu_b: syr837@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ vin-supply = <&vcc_sys>;
+ regulator-compatible = "fan53555-reg";
+ pinctrl-0 = <&vsel1_gpio>;
+ vsel-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-initial-state = <3>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: syr828@41 {
+ compatible = "silergy,syr828";
+ status = "okay";
+ reg = <0x41>;
+ vin-supply = <&vcc_sys>;
+ regulator-compatible = "fan53555-reg";
+ pinctrl-0 = <&vsel2_gpio>;
+ vsel-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <735000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <1000>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ rk818: pmic@1c {
+ compatible = "rockchip,rk818";
+ status = "okay";
+ reg = <0x1c>;
+ clock-output-names = "xin32k", "wifibt_32kin";
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ rk818,support_dc_chg = <1>;/*1: dc chg; 0:usb chg*/
+ wakeup-source;
+ extcon = <&fusb0>;
+ #clock-cells = <1>;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+
+ regulators {
+ vdd_cpu_l: DCDC_REG1 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_center: DCDC_REG2 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcca3v0_codec";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v0_tp: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc3v0_tp";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca1v8_codec";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_power_on: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_power_on";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_3v0: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc_3v0";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc_1v5";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc1v8_dvp";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s3: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3_s3";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_sd: LDO_REG9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc3v3_s0";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+ };
+
+ battery {
+ compatible = "rk818-battery";
+ ocv_table = <3400 3675 3689 3716 3740 3756 3768 3780
+ 3793 3807 3827 3853 3896 3937 3974 4007 4066
+ 4110 4161 4217 4308>;
+ design_capacity = <7916>;
+ design_qmax = <8708>;
+ bat_res = <65>;
+ max_input_current = <3000>;
+ max_chrg_current = <3000>;
+ max_chrg_voltage = <4350>;
+ sleep_enter_current = <300>;
+ sleep_exit_current = <300>;
+ power_off_thresd = <3400>;
+ zero_algorithm_vol = <3950>;
+ fb_temperature = <105>;
+ sample_res = <20>;
+ max_soc_offset = <60>;
+ energy_mode = <0>;
+ monitor_sec = <5>;
+ virtual_power = <0>;
+ power_dc2otg = <0>;
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ i2c-scl-rising-time-ns = <140>;
+ i2c-scl-falling-time-ns = <30>;
+
+ es8316: es8316@10 {
+ #sound-dai-cells = <0>;
+ compatible = "everest,es8316";
+ reg = <0x11>;
+ clocks = <&cru SCLK_I2S_8CH_OUT>;
+ clock-names = "mclk";
+ spk-con-gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+ i2c-scl-rising-time-ns = <345>;
+ i2c-scl-falling-time-ns = <11>;
+ clock-frequency = <400000>;
+
+ lsm330_accel@1e {
+ status = "okay";
+ compatible = "lsm330_acc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lsm330a_irq_gpio>;
+ reg = <0x1e>;
+ irq-gpio = <&gpio2 27 IRQ_TYPE_EDGE_RISING>;
+ type = <SENSOR_TYPE_ACCEL>;
+ irq_enable = <1>;
+ poll_delay_ms = <30>;
+ power-off-in-suspend = <1>;
+ layout = <4>;
+ };
+
+ lsm330_gyro@6a {
+ status = "okay";
+ compatible = "lsm330_gyro";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lsm330g_irq_gpio>;
+ reg = <0x6a>;
+ irq-gpio = <&gpio1 20 IRQ_TYPE_EDGE_RISING>;
+ type = <SENSOR_TYPE_GYROSCOPE>;
+ irq_enable = <0>;
+ power-off-in-suspend = <1>;
+ poll_delay_ms = <30>;
+ };
+
+ mpu6500@68 {
+ status = "disabled";
+ compatible = "invensense,mpu6500";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mpu6500_irq_gpio>;
+ reg = <0x68>;
+ irq-gpio = <&gpio2 27 IRQ_TYPE_EDGE_RISING>;
+ mpu-int_config = <0x10>;
+ mpu-level_shifter = <0>;
+ mpu-orientation = <1 0 0 0 1 0 0 0 1>;
+ orientation-x= <1>;
+ orientation-y= <1>;
+ orientation-z= <0>;
+ support-hw-poweroff = <1>;
+ mpu-debug = <1>;
+ };
+
+ sensor@0d {
+ status = "okay";
+ compatible = "ak8963";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ak8963_irq_gpio>;
+ reg = <0x0d>;
+ type = <SENSOR_TYPE_COMPASS>;
+ irq-gpio = <&gpio2 28 IRQ_TYPE_EDGE_RISING>;
+ irq_enable = <0>;
+ poll_delay_ms = <30>;
+ layout = <3>;
+ };
+
+ sensor@10 {
+ status = "okay";
+ compatible = "capella,light_cm3218";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cm3218_irq_gpio>;
+ reg = <0x10>;
+ type = <SENSOR_TYPE_LIGHT>;
+ irq-gpio = <&gpio4 24 IRQ_TYPE_EDGE_FALLING>;
+ irq_enable = <1>;
+ poll_delay_ms = <30>;
+ };
+
+ fusb0: fusb30x@22 {
+ compatible = "fairchild,fusb302";
+ reg = <0x22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ int-n-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+};
+
+&i2c5 {
+ status = "okay";
+ i2c-scl-rising-time-ns = <150>;
+ i2c-scl-falling-time-ns = <30>;
+ clock-frequency = <400000>;
+
+ gt9xx: gt9xx@14 {
+ compatible = "goodix,gt9xx";
+ reg = <0x14>;
+ touch-gpio = <&gpio3 12 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ max-x = <1536>;
+ max-y = <2048>;
+ tp-size = <970>;
+ tp-supply = <&vcc3v0_tp>;
+ };
+};
+
+&io_domains {
+ status = "okay";
+
+ bt656-supply = <&vcc1v8_dvp>;
+ audio-supply = <&vcca1v8_codec>;
+ sdmmc-supply = <&vcc_sd>;
+ gpio1830-supply = <&vcc_3v0>;
+};
+
+&isp0 {
+ status = "okay";
+};
+
+&isp1 {
+ status = "okay";
+};
+
+&isp0_mmu {
+ status = "okay";
+};
+
+&isp1_mmu {
+ status = "okay";
+};
+
+&vpu {
+ status = "okay";
+};
+
+&rkvdec {
+ status = "okay";
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&gpu {
+ status = "okay";
+ mali-supply = <&vdd_gpu>;
+};
+
+&rga {
+ status = "okay";
+};
+
+&spi1 {
+ status = "disabled";
+ max-freq = <50000000>;
+ mpu6500@0 {
+ status = "disabled";
+ compatible = "inv-spi,mpu6500";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mpu6500_irq_gpio>;
+ irq-gpio = <&gpio2 27 IRQ_TYPE_EDGE_RISING>;
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cpha;
+ spi-cpol;
+ mpu-int_config = <0x00>;
+ mpu-level_shifter = <0>;
+ mpu-orientation = <1 0 0 0 1 0 0 0 1>;
+ orientation-x= <1>;
+ orientation-y= <0>;
+ orientation-z= <1>;
+ support-hw-poweroff = <1>;
+ mpu-debug = <1>;
+ };
+};
+
+&tcphy0 {
+ extcon = <&fusb0>;
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+ extcon = <&fusb0>;
+
+ u2phy0_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ extcon = <&fusb0>;
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ status = "okay";
+};
+
+&pinctrl {
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wireless-bluetooth {
+ uart0_gpios: uart0-gpios {
+ rockchip,pins = <2 19 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins =
+ <1 21 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ pmic_dvs2: pmic-dvs2 {
+ rockchip,pins =
+ <1 18 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins =
+ <1 17 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins =
+ <1 14 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ hallsensor {
+ mh248_irq_gpio: mh248-irq-gpio {
+ rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ headphone {
+ hp_det: hp-det {
+ rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ lsm330_a {
+ lsm330a_irq_gpio: lsm330a-irq-gpio {
+ rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ lsm330_g {
+ lsm330g_irq_gpio: lsm330g-irq-gpio {
+ rockchip,pins = <1 20 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ mpu6500 {
+ mpu6500_irq_gpio: mpu6500-irq-gpio {
+ rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ ak8963 {
+ ak8963_irq_gpio: ak8963-irq-gpio {
+ rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ cm3218 {
+ cm3218_irq_gpio: cm3218-irq-gpio {
+ rockchip,pins = <4 24 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins =
+ <4 25 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ fusb30x {
+ fusb0_int: fusb0-int {
+ rockchip,pins =
+ <1 1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&edp {
+ status = "okay";
+ ports {
+ edp_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_out_panel: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_in_edp>;
+ };
+ };
+ };
+};
+
+&edp_in_vopl {
+ status = "disabled";
+};
+
+&hdmi {
+ status = "disabled";
+};
+
+&cdn_dp {
+ status = "okay";
+ extcon = <&fusb0>;
+ phys = <&tcphy0_dp>;
+};
+
+&dp_in_vopb {
+ status = "disabled";
+};
+
+&pmu_io_domains {
+ status = "okay";
+ pmu1830-supply = <&vcc_1v8>;
+};
+
+&route_edp {
+ status = "okay";
+ logo,mode = "center";
+};
+++ /dev/null
-/*
- * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "rk3399-excavator-sapphire.dtsi"
-#include "rk3399-android-next.dtsi"
-
-/ {
- model = "Rockchip RK3399 Excavator Board edp (Android)";
- compatible = "rockchip,android", "rockchip,rk3399-excavator-edp-next", "rockchip,rk3399";
-
- edp_panel: edp-panel {
- compatible = "lg,lp079qx1-sp0v", "panel-simple";
- backlight = <&backlight>;
- power-supply = <&vcc3v3_s0>;
- enable-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
-
- ports {
- panel_in_edp: endpoint {
- remote-endpoint = <&edp_out_panel>;
- };
- };
- };
-
- test-power {
- status = "okay";
- };
-};
-
-&backlight {
- status = "okay";
-};
-
-&i2s2 {
- status = "okay";
-};
-
-&i2c1 {
- status = "okay";
-
- gsl3673: gsl3673@40 {
- compatible = "GSL,GSL3673";
- reg = <0x40>;
- screen_max_x = <1536>;
- screen_max_y = <2048>;
- irq_gpio_number = <&gpio1 20 IRQ_TYPE_LEVEL_LOW>;
- rst_gpio_number = <&gpio4 22 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&edp {
- status = "okay";
-
- ports {
- edp_out: port@1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- edp_out_panel: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_in_edp>;
- };
- };
- };
-};
-
-&pinctrl {
- lcd-panel {
- lcd_panel_reset: lcd-panel-reset {
- rockchip,pins = <4 30 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-};
-
-&backlight{
- enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-};
-
-&route_edp {
- status = "okay";
-};
-
-&vpu {
- status = "okay";
-};
-
-&rkvdec {
- status = "okay";
-};
--- /dev/null
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3399-excavator-sapphire.dtsi"
+#include "rk3399-android.dtsi"
+
+/ {
+ model = "Rockchip RK3399 Excavator Board edp (Android)";
+ compatible = "rockchip,android", "rockchip,rk3399-excavator-edp-next", "rockchip,rk3399";
+
+ edp_panel: edp-panel {
+ compatible = "lg,lp079qx1-sp0v", "panel-simple";
+ backlight = <&backlight>;
+ power-supply = <&vcc3v3_s0>;
+ enable-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&edp_out_panel>;
+ };
+ };
+ };
+
+ test-power {
+ status = "okay";
+ };
+};
+
+&backlight {
+ status = "okay";
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ gsl3673: gsl3673@40 {
+ compatible = "GSL,GSL3673";
+ reg = <0x40>;
+ screen_max_x = <1536>;
+ screen_max_y = <2048>;
+ irq_gpio_number = <&gpio1 20 IRQ_TYPE_LEVEL_LOW>;
+ rst_gpio_number = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&edp {
+ status = "okay";
+
+ ports {
+ edp_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ edp_out_panel: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_in_edp>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ lcd-panel {
+ lcd_panel_reset: lcd-panel-reset {
+ rockchip,pins = <4 30 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&backlight{
+ enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+};
+
+&route_edp {
+ status = "okay";
+};
+
+&vpu {
+ status = "okay";
+};
+
+&rkvdec {
+ status = "okay";
+};
/dts-v1/;
#include <dt-bindings/pinctrl/rk.h>
#include "rk3399.dtsi"
-#include "rk3399-android-next.dtsi"
+#include "rk3399-android.dtsi"
#include "rk3399-opp.dtsi"
#include <dt-bindings/sensor-dev.h>
#include <dt-bindings/pwm/pwm.h>
projects / firefly-linux-kernel-4.4.55.git / commitdiff