USB: pxa168: Add onchip USB host controller support
authorTanmay Upadhyay <tanmay.upadhyay@einfochips.com>
Wed, 20 Jul 2011 04:30:58 +0000 (10:00 +0530)
committerGreg Kroah-Hartman <gregkh@suse.de>
Mon, 22 Aug 2011 22:38:30 +0000 (15:38 -0700)
- Add EHCI Host controller driver
- Add wrapper that creates resources for host controller driver

v2 - Call clk_put() after clk_disable() in probe function

Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
arch/arm/mach-mmp/include/mach/pxa168.h
arch/arm/mach-mmp/pxa168.c
drivers/usb/Kconfig
drivers/usb/host/Kconfig
drivers/usb/host/ehci-hcd.c
drivers/usb/host/ehci-pxa168.c [new file with mode: 0644]

index 7f005843a7075d1ae1ec334fa694dd309acf3c92..7fb568d2845b0da8f86c2614b6072b9526b3ee5e 100644 (file)
@@ -35,6 +35,13 @@ extern struct pxa_device_desc pxa168_device_fb;
 extern struct pxa_device_desc pxa168_device_keypad;
 extern struct pxa_device_desc pxa168_device_eth;
 
+struct pxa168_usb_pdata {
+       /* If NULL, default phy init routine for PXA168 would be called */
+       int (*phy_init)(void __iomem *usb_phy_reg_base);
+};
+/* pdata can be NULL */
+int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata);
+
 static inline int pxa168_add_uart(int id)
 {
        struct pxa_device_desc *d = NULL;
index 0156f535dae76facab7e23bd5eb58580e208a207..b2b280c517ddeba3ef47f929ebb218592d73ac88 100644 (file)
@@ -25,6 +25,9 @@
 #include <mach/dma.h>
 #include <mach/devices.h>
 #include <mach/mfp.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <mach/pxa168.h>
 
 #include "common.h"
 #include "clock.h"
@@ -83,6 +86,7 @@ static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
 static APMU_CLK(nand, NAND, 0x19b, 156000000);
 static APMU_CLK(lcd, LCD, 0x7f, 312000000);
 static APMU_CLK(eth, ETH, 0x09, 0);
+static APMU_CLK(usb, USB, 0x12, 0);
 
 /* device and clock bindings */
 static struct clk_lookup pxa168_clkregs[] = {
@@ -104,6 +108,7 @@ static struct clk_lookup pxa168_clkregs[] = {
        INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
        INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
        INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
+       INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"),
 };
 
 static int __init pxa168_init(void)
@@ -169,3 +174,44 @@ PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
 PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
 PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
 PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff);
+
+struct resource pxa168_usb_host_resources[] = {
+       /* USB Host conroller register base */
+       [0] = {
+               .start  = 0xd4209000,
+               .end    = 0xd4209000 + 0x200,
+               .flags  = IORESOURCE_MEM,
+               .name   = "pxa168-usb-host",
+       },
+       /* USB PHY register base */
+       [1] = {
+               .start  = 0xd4206000,
+               .end    = 0xd4206000 + 0xff,
+               .flags  = IORESOURCE_MEM,
+               .name   = "pxa168-usb-phy",
+       },
+       [2] = {
+               .start  = IRQ_PXA168_USB2,
+               .end    = IRQ_PXA168_USB2,
+               .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32);
+struct platform_device pxa168_device_usb_host = {
+       .name = "pxa168-ehci",
+       .id   = -1,
+       .dev  = {
+               .dma_mask = &pxa168_usb_host_dmamask,
+               .coherent_dma_mask = DMA_BIT_MASK(32),
+       },
+
+       .num_resources = ARRAY_SIZE(pxa168_usb_host_resources),
+       .resource      = pxa168_usb_host_resources,
+};
+
+int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata)
+{
+       pxa168_device_usb_host.dev.platform_data = pdata;
+       return platform_device_register(&pxa168_device_usb_host);
+}
index 48f1781352f154e9820eda618696c9e3d486c0af..7e7f42baa9386a5f9b88614ab547935d50ffa4be 100644 (file)
@@ -69,6 +69,7 @@ config USB_ARCH_HAS_EHCI
        default y if ARCH_MSM
        default y if MICROBLAZE
        default y if SPARC_LEON
+       default y if ARCH_MMP
        default PCI
 
 # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
index ab085f12d570ec2e246070f1ed7bab601019f527..5791fe97b4a6b8c495e3f3eebd1caa5a4041a19c 100644 (file)
@@ -578,3 +578,10 @@ config USB_OCTEON_OHCI
 config USB_OCTEON2_COMMON
        bool
        default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI
+
+config USB_PXA168_EHCI
+       bool "Marvell PXA168 on-chip EHCI HCD support"
+       depends on USB_EHCI_HCD && ARCH_MMP
+       help
+         Enable support for Marvell PXA168 SoC's on-chip EHCI
+         host controller
index f72ae0b6ee7f27ec1f2122b8738d0799fbd7aa60..750f60fe6a9f24dbcbc037a4479092be80c02b27 100644 (file)
@@ -1291,6 +1291,11 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER                ehci_grlib_driver
 #endif
 
+#ifdef CONFIG_USB_PXA168_EHCI
+#include "ehci-pxa168.c"
+#define PLATFORM_DRIVER                ehci_pxa168_driver
+#endif
+
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
     !defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/drivers/usb/host/ehci-pxa168.c b/drivers/usb/host/ehci-pxa168.c
new file mode 100644 (file)
index 0000000..ac0c16e
--- /dev/null
@@ -0,0 +1,363 @@
+/*
+ * drivers/usb/host/ehci-pxa168.c
+ *
+ * Tanmay Upadhyay <tanmay.upadhyay@einfochips.com>
+ *
+ * Based on drivers/usb/host/ehci-orion.c
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <mach/pxa168.h>
+
+#define USB_PHY_CTRL_REG 0x4
+#define USB_PHY_PLL_REG  0x8
+#define USB_PHY_TX_REG   0xc
+
+#define FBDIV_SHIFT      4
+
+#define ICP_SHIFT        12
+#define ICP_15            2
+#define ICP_20            3
+#define ICP_25            4
+
+#define KVCO_SHIFT       15
+
+#define PLLCALI12_SHIFT  25
+#define CALI12_VDD        0
+#define CALI12_09         1
+#define CALI12_10         2
+#define CALI12_11         3
+
+#define PLLVDD12_SHIFT   27
+#define VDD12_VDD         0
+#define VDD12_10          1
+#define VDD12_11          2
+#define VDD12_12          3
+
+#define PLLVDD18_SHIFT   29
+#define VDD18_19          0
+#define VDD18_20          1
+#define VDD18_21          2
+#define VDD18_22          3
+
+
+#define PLL_READY        (1 << 23)
+#define VCOCAL_START     (1 << 21)
+#define REG_RCAL_START   (1 << 12)
+
+struct pxa168_usb_drv_data {
+       struct ehci_hcd ehci;
+       struct clk      *pxa168_usb_clk;
+       struct resource *usb_phy_res;
+       void __iomem    *usb_phy_reg_base;
+};
+
+static int ehci_pxa168_setup(struct usb_hcd *hcd)
+{
+       struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+       int retval;
+
+       ehci_reset(ehci);
+       retval = ehci_halt(ehci);
+       if (retval)
+               return retval;
+
+       /*
+        * data structure init
+        */
+       retval = ehci_init(hcd);
+       if (retval)
+               return retval;
+
+       hcd->has_tt = 1;
+
+       ehci_port_power(ehci, 0);
+
+       return retval;
+}
+
+static const struct hc_driver ehci_pxa168_hc_driver = {
+       .description = hcd_name,
+       .product_desc = "Marvell PXA168 EHCI",
+       .hcd_priv_size = sizeof(struct pxa168_usb_drv_data),
+
+       /*
+        * generic hardware linkage
+        */
+       .irq = ehci_irq,
+       .flags = HCD_MEMORY | HCD_USB2,
+
+       /*
+        * basic lifecycle operations
+        */
+       .reset = ehci_pxa168_setup,
+       .start = ehci_run,
+       .stop = ehci_stop,
+       .shutdown = ehci_shutdown,
+
+       /*
+        * managing i/o requests and associated device resources
+        */
+       .urb_enqueue = ehci_urb_enqueue,
+       .urb_dequeue = ehci_urb_dequeue,
+       .endpoint_disable = ehci_endpoint_disable,
+       .endpoint_reset = ehci_endpoint_reset,
+
+       /*
+        * scheduling support
+        */
+       .get_frame_number = ehci_get_frame,
+
+       /*
+        * root hub support
+        */
+       .hub_status_data = ehci_hub_status_data,
+       .hub_control = ehci_hub_control,
+       .bus_suspend = ehci_bus_suspend,
+       .bus_resume = ehci_bus_resume,
+       .relinquish_port = ehci_relinquish_port,
+       .port_handed_over = ehci_port_handed_over,
+
+       .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static int pxa168_usb_phy_init(struct platform_device *pdev)
+{
+       struct resource *res;
+       void __iomem *usb_phy_reg_base;
+       struct pxa168_usb_pdata *pdata;
+       struct pxa168_usb_drv_data *drv_data;
+       struct usb_hcd *hcd = platform_get_drvdata(pdev);
+       unsigned long reg_val;
+       int pll_retry_cont = 10000, err = 0;
+
+       drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv;
+       pdata = (struct pxa168_usb_pdata *)pdev->dev.platform_data;
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+       if (!res) {
+               dev_err(&pdev->dev,
+                       "Found HC with no PHY register addr. Check %s setup!\n",
+                       dev_name(&pdev->dev));
+               return -ENODEV;
+       }
+
+       if (!request_mem_region(res->start, resource_size(res),
+                               ehci_pxa168_hc_driver.description)) {
+               dev_dbg(&pdev->dev, "controller already in use\n");
+               return -EBUSY;
+       }
+
+       usb_phy_reg_base = ioremap(res->start, resource_size(res));
+       if (usb_phy_reg_base == NULL) {
+               dev_dbg(&pdev->dev, "error mapping memory\n");
+               err = -EFAULT;
+               goto err1;
+       }
+       drv_data->usb_phy_reg_base = usb_phy_reg_base;
+       drv_data->usb_phy_res = res;
+
+       /* If someone wants to init USB phy in board specific way */
+       if (pdata && pdata->phy_init)
+               return pdata->phy_init(usb_phy_reg_base);
+
+       /* Power up the PHY and PLL */
+       writel(readl(usb_phy_reg_base + USB_PHY_CTRL_REG) | 0x3,
+               usb_phy_reg_base + USB_PHY_CTRL_REG);
+
+       /* Configure PHY PLL */
+       reg_val = readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~(0x7e03ffff);
+       reg_val |= (VDD18_22 << PLLVDD18_SHIFT | VDD12_12 << PLLVDD12_SHIFT |
+               CALI12_11 << PLLCALI12_SHIFT | 3 << KVCO_SHIFT |
+               ICP_15 << ICP_SHIFT | 0xee << FBDIV_SHIFT | 0xb);
+       writel(reg_val, usb_phy_reg_base + USB_PHY_PLL_REG);
+
+       /* Make sure PHY PLL is ready */
+       while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) {
+               if (!(pll_retry_cont--)) {
+                       dev_dbg(&pdev->dev, "USB PHY PLL not ready\n");
+                       err = -EIO;
+                       goto err2;
+               }
+       }
+
+       /* Toggle VCOCAL_START bit of U2PLL for PLL calibration */
+       udelay(200);
+       writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) | VCOCAL_START,
+               usb_phy_reg_base + USB_PHY_PLL_REG);
+       udelay(40);
+       writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~VCOCAL_START,
+               usb_phy_reg_base + USB_PHY_PLL_REG);
+
+       /* Toggle REG_RCAL_START bit of U2PTX for impedance calibration */
+       udelay(400);
+       writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) | REG_RCAL_START,
+               usb_phy_reg_base + USB_PHY_TX_REG);
+       udelay(40);
+       writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) & ~REG_RCAL_START,
+               usb_phy_reg_base + USB_PHY_TX_REG);
+
+       /* Make sure PHY PLL is ready again */
+       pll_retry_cont = 0;
+       while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) {
+               if (!(pll_retry_cont--)) {
+                       dev_dbg(&pdev->dev, "USB PHY PLL not ready\n");
+                       err = -EIO;
+                       goto err2;
+               }
+       }
+
+       return 0;
+err2:
+       iounmap(usb_phy_reg_base);
+err1:
+       release_mem_region(res->start, resource_size(res));
+       return err;
+}
+
+static int __devinit ehci_pxa168_drv_probe(struct platform_device *pdev)
+{
+       struct resource *res;
+       struct usb_hcd *hcd;
+       struct ehci_hcd *ehci;
+       struct pxa168_usb_drv_data *drv_data;
+       void __iomem *regs;
+       int irq, err = 0;
+
+       if (usb_disabled())
+               return -ENODEV;
+
+       pr_debug("Initializing pxa168-SoC USB Host Controller\n");
+
+       irq = platform_get_irq(pdev, 0);
+       if (irq <= 0) {
+               dev_err(&pdev->dev,
+                       "Found HC with no IRQ. Check %s setup!\n",
+                       dev_name(&pdev->dev));
+               err = -ENODEV;
+               goto err1;
+       }
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!res) {
+               dev_err(&pdev->dev,
+                       "Found HC with no register addr. Check %s setup!\n",
+                       dev_name(&pdev->dev));
+               err = -ENODEV;
+               goto err1;
+       }
+
+       if (!request_mem_region(res->start, resource_size(res),
+                               ehci_pxa168_hc_driver.description)) {
+               dev_dbg(&pdev->dev, "controller already in use\n");
+               err = -EBUSY;
+               goto err1;
+       }
+
+       regs = ioremap(res->start, resource_size(res));
+       if (regs == NULL) {
+               dev_dbg(&pdev->dev, "error mapping memory\n");
+               err = -EFAULT;
+               goto err2;
+       }
+
+       hcd = usb_create_hcd(&ehci_pxa168_hc_driver,
+                       &pdev->dev, dev_name(&pdev->dev));
+       if (!hcd) {
+               err = -ENOMEM;
+               goto err3;
+       }
+
+       drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv;
+
+       /* Enable USB clock */
+       drv_data->pxa168_usb_clk = clk_get(&pdev->dev, "PXA168-USBCLK");
+       if (IS_ERR(drv_data->pxa168_usb_clk)) {
+               dev_err(&pdev->dev, "Couldn't get USB clock\n");
+               err = PTR_ERR(drv_data->pxa168_usb_clk);
+               goto err4;
+       }
+       clk_enable(drv_data->pxa168_usb_clk);
+
+       err = pxa168_usb_phy_init(pdev);
+       if (err) {
+               dev_err(&pdev->dev, "USB PHY initialization failed\n");
+               goto err5;
+       }
+
+       hcd->rsrc_start = res->start;
+       hcd->rsrc_len = resource_size(res);
+       hcd->regs = regs;
+
+       ehci = hcd_to_ehci(hcd);
+       ehci->caps = hcd->regs + 0x100;
+       ehci->regs = hcd->regs + 0x100 +
+               HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+       ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+       hcd->has_tt = 1;
+       ehci->sbrn = 0x20;
+
+       err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
+       if (err)
+               goto err5;
+
+       return 0;
+
+err5:
+       clk_disable(drv_data->pxa168_usb_clk);
+       clk_put(drv_data->pxa168_usb_clk);
+err4:
+       usb_put_hcd(hcd);
+err3:
+       iounmap(regs);
+err2:
+       release_mem_region(res->start, resource_size(res));
+err1:
+       dev_err(&pdev->dev, "init %s fail, %d\n",
+               dev_name(&pdev->dev), err);
+
+       return err;
+}
+
+static int __exit ehci_pxa168_drv_remove(struct platform_device *pdev)
+{
+       struct usb_hcd *hcd = platform_get_drvdata(pdev);
+       struct pxa168_usb_drv_data *drv_data =
+               (struct pxa168_usb_drv_data *)hcd->hcd_priv;
+
+       usb_remove_hcd(hcd);
+
+       /* Power down PHY & PLL */
+       writel(readl(drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG) & (~0x3),
+               drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG);
+
+       clk_disable(drv_data->pxa168_usb_clk);
+       clk_put(drv_data->pxa168_usb_clk);
+
+       iounmap(hcd->regs);
+       release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+       iounmap(drv_data->usb_phy_reg_base);
+       release_mem_region(drv_data->usb_phy_res->start,
+                       resource_size(drv_data->usb_phy_res));
+
+       usb_put_hcd(hcd);
+
+       return 0;
+}
+
+MODULE_ALIAS("platform:pxa168-ehci");
+
+static struct platform_driver ehci_pxa168_driver = {
+       .probe          = ehci_pxa168_drv_probe,
+       .remove         = __exit_p(ehci_pxa168_drv_remove),
+       .shutdown       = usb_hcd_platform_shutdown,
+       .driver.name    = "pxa168-ehci",
+};