tty: istallion: tty port open/close methods
authorAlan Cox <alan@linux.intel.com>
Mon, 30 Nov 2009 13:17:08 +0000 (13:17 +0000)
committerGreg Kroah-Hartman <gregkh@suse.de>
Fri, 11 Dec 2009 23:18:06 +0000 (15:18 -0800)
Slice/dice/repeat as with the stallion driver this is just code shuffling
and removal

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/char/istallion.c

index babfd4401f69eeec26578e39373c3608b3c5a8b3..4cd6c527ee4141929c2257e9798a7c51cab45a6b 100644 (file)
@@ -213,7 +213,6 @@ static int          stli_shared;
  *     with the slave. Most of them need to be updated atomically, so always
  *     use the bit setting operations (unless protected by cli/sti).
  */
-#define        ST_INITIALIZING 1
 #define        ST_OPENING      2
 #define        ST_CLOSING      3
 #define        ST_CMDING       4
@@ -783,13 +782,32 @@ static int stli_parsebrd(struct stlconf *confp, char **argp)
 
 /*****************************************************************************/
 
+/*
+ *     On the first open of the device setup the port hardware, and
+ *     initialize the per port data structure. Since initializing the port
+ *     requires several commands to the board we will need to wait for any
+ *     other open that is already initializing the port.
+ *
+ *     Locking: protected by the port mutex.
+ */
+
+static int stli_activate(struct tty_port *port, struct tty_struct *tty)
+{
+       struct stliport *portp = container_of(port, struct stliport, port);
+       struct stlibrd *brdp = stli_brds[portp->brdnr];
+       int rc;
+
+       if ((rc = stli_initopen(tty, brdp, portp)) >= 0)
+               clear_bit(TTY_IO_ERROR, &tty->flags);
+       wake_up_interruptible(&portp->raw_wait);
+       return rc;
+}
+
 static int stli_open(struct tty_struct *tty, struct file *filp)
 {
        struct stlibrd *brdp;
        struct stliport *portp;
-       struct tty_port *port;
        unsigned int minordev, brdnr, portnr;
-       int rc;
 
        minordev = tty->index;
        brdnr = MINOR2BRD(minordev);
@@ -809,95 +827,56 @@ static int stli_open(struct tty_struct *tty, struct file *filp)
                return -ENODEV;
        if (portp->devnr < 1)
                return -ENODEV;
-       port = &portp->port;
-
-/*
- *     On the first open of the device setup the port hardware, and
- *     initialize the per port data structure. Since initializing the port
- *     requires several commands to the board we will need to wait for any
- *     other open that is already initializing the port.
- *
- *     Review - locking
- */
-       tty_port_tty_set(port, tty);
-       tty->driver_data = portp;
-       port->count++;
-
-       wait_event_interruptible(portp->raw_wait,
-                       !test_bit(ST_INITIALIZING, &portp->state));
-       if (signal_pending(current))
-               return -ERESTARTSYS;
-
-       if ((portp->port.flags & ASYNC_INITIALIZED) == 0) {
-               set_bit(ST_INITIALIZING, &portp->state);
-               if ((rc = stli_initopen(tty, brdp, portp)) >= 0) {
-                       /* Locking */
-                       port->flags |= ASYNC_INITIALIZED;
-                       clear_bit(TTY_IO_ERROR, &tty->flags);
-               }
-               clear_bit(ST_INITIALIZING, &portp->state);
-               wake_up_interruptible(&portp->raw_wait);
-               if (rc < 0)
-                       return rc;
-       }
-       return tty_port_block_til_ready(&portp->port, tty, filp);
+       return tty_port_open(&portp->port, tty, filp);
 }
 
+
 /*****************************************************************************/
 
-static void stli_close(struct tty_struct *tty, struct file *filp)
+static void stli_shutdown(struct tty_port *port)
 {
        struct stlibrd *brdp;
-       struct stliport *portp;
-       struct tty_port *port;
+       unsigned long ftype;
        unsigned long flags;
+       struct stliport *portp = container_of(port, struct stliport, port);
 
-       portp = tty->driver_data;
-       if (portp == NULL)
+       if (portp->brdnr >= stli_nrbrds)
                return;
-       port = &portp->port;
-
-       if (tty_port_close_start(port, tty, filp) == 0)
+       brdp = stli_brds[portp->brdnr];
+       if (brdp == NULL)
                return;
 
-/*
- *     May want to wait for data to drain before closing. The BUSY flag
- *     keeps track of whether we are still transmitting or not. It is
- *     updated by messages from the slave - indicating when all chars
- *     really have drained.
- */
-       spin_lock_irqsave(&stli_lock, flags);
-       if (tty == stli_txcooktty)
-               stli_flushchars(tty);
-       spin_unlock_irqrestore(&stli_lock, flags);
-
-       /* We end up doing this twice for the moment. This needs looking at
-          eventually. Note we still use portp->closing_wait as a result */
-       if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE)
-               tty_wait_until_sent(tty, portp->closing_wait);
+       /*
+        *      May want to wait for data to drain before closing. The BUSY
+        *      flag keeps track of whether we are still transmitting or not.
+        *      It is updated by messages from the slave - indicating when all
+        *      chars really have drained.
+        */
 
-       /* FIXME: port locking here needs attending to */
-       port->flags &= ~ASYNC_INITIALIZED;
+       if (!test_bit(ST_CLOSING, &portp->state))
+               stli_rawclose(brdp, portp, 0, 0);
 
-       brdp = stli_brds[portp->brdnr];
-       stli_rawclose(brdp, portp, 0, 0);
-       if (tty->termios->c_cflag & HUPCL) {
-               stli_mkasysigs(&portp->asig, 0, 0);
-               if (test_bit(ST_CMDING, &portp->state))
-                       set_bit(ST_DOSIGS, &portp->state);
-               else
-                       stli_sendcmd(brdp, portp, A_SETSIGNALS, &portp->asig,
-                               sizeof(asysigs_t), 0);
-       }
+       spin_lock_irqsave(&stli_lock, flags);
        clear_bit(ST_TXBUSY, &portp->state);
        clear_bit(ST_RXSTOP, &portp->state);
-       set_bit(TTY_IO_ERROR, &tty->flags);
-       tty_ldisc_flush(tty);
-       set_bit(ST_DOFLUSHRX, &portp->state);
-       stli_flushbuffer(tty);
+       spin_unlock_irqrestore(&stli_lock, flags);
 
-       tty_port_close_end(port, tty);
-       tty_port_tty_set(port, NULL);
+       ftype = FLUSHTX | FLUSHRX;
+       stli_cmdwait(brdp, portp, A_FLUSH, &ftype, sizeof(u32), 0);
+}
+
+static void stli_close(struct tty_struct *tty, struct file *filp)
+{
+       struct stliport *portp = tty->driver_data;
+       unsigned long flags;
+       if (portp == NULL)
+               return;
+       spin_lock_irqsave(&stli_lock, flags);
+       /*      Flush any internal buffering out first */
+       if (tty == stli_txcooktty)
+               stli_flushchars(tty);
+       spin_unlock_irqrestore(&stli_lock, flags);
+       tty_port_close(&portp->port, tty, filp);
 }
 
 /*****************************************************************************/
@@ -1724,6 +1703,7 @@ static void stli_start(struct tty_struct *tty)
 
 /*****************************************************************************/
 
+
 /*
  *     Hangup this port. This is pretty much like closing the port, only
  *     a little more brutal. No waiting for data to drain. Shutdown the
@@ -1733,47 +1713,8 @@ static void stli_start(struct tty_struct *tty)
 
 static void stli_hangup(struct tty_struct *tty)
 {
-       struct stliport *portp;
-       struct stlibrd *brdp;
-       struct tty_port *port;
-       unsigned long flags;
-
-       portp = tty->driver_data;
-       if (portp == NULL)
-               return;
-       if (portp->brdnr >= stli_nrbrds)
-               return;
-       brdp = stli_brds[portp->brdnr];
-       if (brdp == NULL)
-               return;
-       port = &portp->port;
-
-       spin_lock_irqsave(&port->lock, flags);
-       port->flags &= ~ASYNC_INITIALIZED;
-       spin_unlock_irqrestore(&port->lock, flags);
-
-       if (!test_bit(ST_CLOSING, &portp->state))
-               stli_rawclose(brdp, portp, 0, 0);
-
-       spin_lock_irqsave(&stli_lock, flags);
-       if (tty->termios->c_cflag & HUPCL) {
-               stli_mkasysigs(&portp->asig, 0, 0);
-               if (test_bit(ST_CMDING, &portp->state)) {
-                       set_bit(ST_DOSIGS, &portp->state);
-                       set_bit(ST_DOFLUSHTX, &portp->state);
-                       set_bit(ST_DOFLUSHRX, &portp->state);
-               } else {
-                       stli_sendcmd(brdp, portp, A_SETSIGNALSF,
-                               &portp->asig, sizeof(asysigs_t), 0);
-               }
-       }
-
-       clear_bit(ST_TXBUSY, &portp->state);
-       clear_bit(ST_RXSTOP, &portp->state);
-       set_bit(TTY_IO_ERROR, &tty->flags);
-       spin_unlock_irqrestore(&stli_lock, flags);
-
-       tty_port_hangup(port);
+       struct stliport *portp = tty->driver_data;
+       tty_port_hangup(&portp->port);
 }
 
 /*****************************************************************************/
@@ -4420,6 +4361,8 @@ static const struct tty_operations stli_ops = {
 static const struct tty_port_operations stli_port_ops = {
        .carrier_raised = stli_carrier_raised,
        .dtr_rts = stli_dtr_rts,
+       .activate = stli_activate,
+       .shutdown = stli_shutdown,
 };
 
 /*****************************************************************************/