firewire: Implement suspend/resume PCI driver hooks.
authorKristian Høgsberg <krh@redhat.com>
Wed, 30 May 2007 23:06:35 +0000 (19:06 -0400)
committerStefan Richter <stefanr@s5r6.in-berlin.de>
Thu, 31 May 2007 19:40:14 +0000 (21:40 +0200)
It's a low-impact design, that just makes suspend/resume look like
a bus reset to the upper level drivers, but it should be sufficient.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
drivers/firewire/fw-card.c
drivers/firewire/fw-ohci.c

index 636151a64add8405d22fe05405d23cbd67c99780..9eb1edacd825d3d4c4e5d345bfb9c869bef98aaa 100644 (file)
@@ -407,11 +407,6 @@ fw_card_add(struct fw_card *card,
        card->link_speed = link_speed;
        card->guid = guid;
 
-       /* Activate link_on bit and contender bit in our self ID packets.*/
-       if (card->driver->update_phy_reg(card, 4, 0,
-                                        PHY_LINK_ACTIVE | PHY_CONTENDER) < 0)
-               return -EIO;
-
        /*
         * The subsystem grabs a reference when the card is added and
         * drops it when the driver calls fw_core_remove_card.
index 2e4cfa57126d618254c9abf42f9f3b4bfc54718b..0d08bf9b78c21d8f1811a317e5145ae577e4cc98 100644 (file)
@@ -417,12 +417,21 @@ ar_context_init(struct ar_context *ctx, struct fw_ohci *ohci, u32 regs)
        ctx->current_buffer = ab.next;
        ctx->pointer = ctx->current_buffer->data;
 
-       reg_write(ctx->ohci, COMMAND_PTR(ctx->regs),
-                 le32_to_cpu(ab.descriptor.branch_address));
+       return 0;
+}
+
+static void ar_context_run(struct ar_context *ctx)
+{
+       struct ar_buffer *ab = ctx->current_buffer;
+       dma_addr_t ab_bus;
+       size_t offset;
+
+       offset = offsetof(struct ar_buffer, data);
+       ab_bus = ab->descriptor.data_address - offset;
+
+       reg_write(ctx->ohci, COMMAND_PTR(ctx->regs), ab_bus | 1);
        reg_write(ctx->ohci, CONTROL_SET(ctx->regs), CONTEXT_RUN);
        flush_writes(ctx->ohci);
-
-       return 0;
 }
 
 static void context_tasklet(unsigned long data)
@@ -1039,11 +1048,78 @@ static irqreturn_t irq_handler(int irq, void *data)
        return IRQ_HANDLED;
 }
 
+static int software_reset(struct fw_ohci *ohci)
+{
+       int i;
+
+       reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset);
+
+       for (i = 0; i < OHCI_LOOP_COUNT; i++) {
+               if ((reg_read(ohci, OHCI1394_HCControlSet) &
+                    OHCI1394_HCControl_softReset) == 0)
+                       return 0;
+               msleep(1);
+       }
+
+       return -EBUSY;
+}
+
 static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length)
 {
        struct fw_ohci *ohci = fw_ohci(card);
        struct pci_dev *dev = to_pci_dev(card->device);
 
+       if (software_reset(ohci)) {
+               fw_error("Failed to reset ohci card.\n");
+               return -EBUSY;
+       }
+
+       /*
+        * Now enable LPS, which we need in order to start accessing
+        * most of the registers.  In fact, on some cards (ALI M5251),
+        * accessing registers in the SClk domain without LPS enabled
+        * will lock up the machine.  Wait 50msec to make sure we have
+        * full link enabled.
+        */
+       reg_write(ohci, OHCI1394_HCControlSet,
+                 OHCI1394_HCControl_LPS |
+                 OHCI1394_HCControl_postedWriteEnable);
+       flush_writes(ohci);
+       msleep(50);
+
+       reg_write(ohci, OHCI1394_HCControlClear,
+                 OHCI1394_HCControl_noByteSwapData);
+
+       reg_write(ohci, OHCI1394_LinkControlSet,
+                 OHCI1394_LinkControl_rcvSelfID |
+                 OHCI1394_LinkControl_cycleTimerEnable |
+                 OHCI1394_LinkControl_cycleMaster);
+
+       reg_write(ohci, OHCI1394_ATRetries,
+                 OHCI1394_MAX_AT_REQ_RETRIES |
+                 (OHCI1394_MAX_AT_RESP_RETRIES << 4) |
+                 (OHCI1394_MAX_PHYS_RESP_RETRIES << 8));
+
+       ar_context_run(&ohci->ar_request_ctx);
+       ar_context_run(&ohci->ar_response_ctx);
+
+       reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus);
+       reg_write(ohci, OHCI1394_PhyUpperBound, 0x00010000);
+       reg_write(ohci, OHCI1394_IntEventClear, ~0);
+       reg_write(ohci, OHCI1394_IntMaskClear, ~0);
+       reg_write(ohci, OHCI1394_IntMaskSet,
+                 OHCI1394_selfIDComplete |
+                 OHCI1394_RQPkt | OHCI1394_RSPkt |
+                 OHCI1394_reqTxComplete | OHCI1394_respTxComplete |
+                 OHCI1394_isochRx | OHCI1394_isochTx |
+                 OHCI1394_masterIntEnable |
+                 OHCI1394_cycle64Seconds);
+
+       /* Activate link_on bit and contender bit in our self ID packets.*/
+       if (ohci_update_phy_reg(card, 4, 0,
+                               PHY_LINK_ACTIVE | PHY_CONTENDER) < 0)
+               return -EIO;
+
        /*
         * When the link is not yet enabled, the atomic config rom
         * update mechanism described below in ohci_set_config_rom()
@@ -1701,22 +1777,6 @@ static const struct fw_card_driver ohci_driver = {
        .stop_iso               = ohci_stop_iso,
 };
 
-static int software_reset(struct fw_ohci *ohci)
-{
-       int i;
-
-       reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset);
-
-       for (i = 0; i < OHCI_LOOP_COUNT; i++) {
-               if ((reg_read(ohci, OHCI1394_HCControlSet) &
-                    OHCI1394_HCControl_softReset) == 0)
-                       return 0;
-               msleep(1);
-       }
-
-       return -EBUSY;
-}
-
 static int __devinit
 pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 {
@@ -1762,33 +1822,6 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
                goto fail_iomem;
        }
 
-       if (software_reset(ohci)) {
-               fw_error("Failed to reset ohci card.\n");
-               err = -EBUSY;
-               goto fail_registers;
-       }
-
-       /*
-        * Now enable LPS, which we need in order to start accessing
-        * most of the registers.  In fact, on some cards (ALI M5251),
-        * accessing registers in the SClk domain without LPS enabled
-        * will lock up the machine.  Wait 50msec to make sure we have
-        * full link enabled.
-        */
-       reg_write(ohci, OHCI1394_HCControlSet,
-                 OHCI1394_HCControl_LPS |
-                 OHCI1394_HCControl_postedWriteEnable);
-       flush_writes(ohci);
-       msleep(50);
-
-       reg_write(ohci, OHCI1394_HCControlClear,
-                 OHCI1394_HCControl_noByteSwapData);
-
-       reg_write(ohci, OHCI1394_LinkControlSet,
-                 OHCI1394_LinkControl_rcvSelfID |
-                 OHCI1394_LinkControl_cycleTimerEnable |
-                 OHCI1394_LinkControl_cycleMaster);
-
        ar_context_init(&ohci->ar_request_ctx, ohci,
                        OHCI1394_AsReqRcvContextControlSet);
 
@@ -1801,11 +1834,6 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
        context_init(&ohci->at_response_ctx, ohci, AT_BUFFER_SIZE,
                     OHCI1394_AsRspTrContextControlSet, handle_at_packet);
 
-       reg_write(ohci, OHCI1394_ATRetries,
-                 OHCI1394_MAX_AT_REQ_RETRIES |
-                 (OHCI1394_MAX_AT_RESP_RETRIES << 4) |
-                 (OHCI1394_MAX_PHYS_RESP_RETRIES << 8));
-
        reg_write(ohci, OHCI1394_IsoRecvIntMaskSet, ~0);
        ohci->it_context_mask = reg_read(ohci, OHCI1394_IsoRecvIntMaskSet);
        reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, ~0);
@@ -1835,18 +1863,6 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
                goto fail_registers;
        }
 
-       reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus);
-       reg_write(ohci, OHCI1394_PhyUpperBound, 0x00010000);
-       reg_write(ohci, OHCI1394_IntEventClear, ~0);
-       reg_write(ohci, OHCI1394_IntMaskClear, ~0);
-       reg_write(ohci, OHCI1394_IntMaskSet,
-                 OHCI1394_selfIDComplete |
-                 OHCI1394_RQPkt | OHCI1394_RSPkt |
-                 OHCI1394_reqTxComplete | OHCI1394_respTxComplete |
-                 OHCI1394_isochRx | OHCI1394_isochTx |
-                 OHCI1394_masterIntEnable |
-                 OHCI1394_cycle64Seconds);
-
        bus_options = reg_read(ohci, OHCI1394_BusOptions);
        max_receive = (bus_options >> 12) & 0xf;
        link_speed = bus_options & 0x7;
@@ -1908,6 +1924,45 @@ static void pci_remove(struct pci_dev *dev)
        fw_notify("Removed fw-ohci device.\n");
 }
 
+#ifdef CONFIG_PM
+static int pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+       struct fw_ohci *ohci = pci_get_drvdata(pdev);
+       int err;
+
+       software_reset(ohci);
+       free_irq(pdev->irq, ohci);
+       err = pci_save_state(pdev);
+       if (err) {
+               fw_error("pci_save_state failed with %d", err);
+               return err;
+       }
+       err = pci_set_power_state(pdev, pci_choose_state(pdev, state));
+       if (err) {
+               fw_error("pci_set_power_state failed with %d", err);
+               return err;
+       }
+
+       return 0;
+}
+
+static int pci_resume(struct pci_dev *pdev)
+{
+       struct fw_ohci *ohci = pci_get_drvdata(pdev);
+       int err;
+
+       pci_set_power_state(pdev, PCI_D0);
+       pci_restore_state(pdev);
+       err = pci_enable_device(pdev);
+       if (err) {
+               fw_error("pci_enable_device failed with %d", err);
+               return err;
+       }
+
+       return ohci_enable(&ohci->card, ohci->config_rom, CONFIG_ROM_SIZE);
+}
+#endif
+
 static struct pci_device_id pci_table[] = {
        { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_FIREWIRE_OHCI, ~0) },
        { }
@@ -1920,6 +1975,10 @@ static struct pci_driver fw_ohci_pci_driver = {
        .id_table       = pci_table,
        .probe          = pci_probe,
        .remove         = pci_remove,
+#ifdef CONFIG_PM
+       .resume         = pci_resume,
+       .suspend        = pci_suspend,
+#endif
 };
 
 MODULE_AUTHOR("Kristian Hoegsberg <krh@bitplanet.net>");