compatible = "ti,omap3-beagle", "ti,omap3"
- OMAP3 Tobi with Overo : Commercial expansion board with daughter board
- compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"
+ compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3"
- OMAP4 SDP : Software Development Board
compatible = "ti,omap4-sdp", "ti,omap4430"
omap3-n900.dtb \
omap3-n9.dtb \
omap3-n950.dtb \
- omap3-tobi.dtb \
+ omap3-overo-tobi.dtb \
+ omap3-overo-storm-tobi.dtb \
omap3-gta04.dtb \
omap3-igep0020.dtb \
omap3-igep0030.dtb \
ti,model = "AM335x-EVMSK";
ti,audio-codec = <&tlv320aic3106>;
ti,mcasp-controller = <&mcasp1>;
- ti,codec-clock-rate = <24576000>;
+ ti,codec-clock-rate = <24000000>;
ti,audio-routing =
"Headphone Jack", "HPLOUT",
"Headphone Jack", "HPROUT";
>;
};
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
status = "okay";
vmmc-supply = <&vmmc_reg>;
bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
&sham {
aux-button {
label = "aux";
linux,code = <169>;
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
gpio-key,wakeup;
};
};
bmp085@77 {
compatible = "bosch,bmp085";
reg = <0x77>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <17 IRQ_TYPE_EDGE_RISING>;
};
/* leds */
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
- vmmc_aux-supply = <&vsim>;
bus-width = <4>;
+ ti,non-removable;
};
&mmc2 {
/ {
model = "Nokia N9";
- compatible = "nokia,omap3-n9", "ti,omap3";
+ compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3";
};
/*
* Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
- * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi>
+ * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 (or later) as
/ {
model = "Nokia N900";
- compatible = "nokia,omap3-n900", "ti,omap3";
+ compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
cpus {
cpu@0 {
/ {
model = "Nokia N950";
- compatible = "nokia,omap3-n950", "ti,omap3";
+ compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3";
};
--- /dev/null
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap3-overo-tobi-common.dtsi"
+
+/ {
+ model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi";
+ compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
--- /dev/null
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo.dtsi"
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ heartbeat {
+ label = "overo:red:gpio21";
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ vddvario: regulator-vddvario {
+ compatible = "regulator-fixed";
+ regulator-name = "vddvario";
+ regulator-always-on;
+ };
+
+ vdd33a: regulator-vdd33a {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd33a";
+ regulator-always-on;
+ };
+};
+
+&gpmc {
+ ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
+
+ ethernet@5,0 {
+ compatible = "smsc,lan9221", "smsc,lan9115";
+ reg = <5 0 0xff>;
+ bank-width = <2>;
+
+ gpmc,mux-add-data;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <42>;
+ gpmc,cs-wr-off-ns = <36>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <12>;
+ gpmc,adv-wr-off-ns = <12>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <42>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <36>;
+ gpmc,rd-cycle-ns = <60>;
+ gpmc,wr-cycle-ns = <54>;
+ gpmc,access-ns = <36>;
+ gpmc,page-burst-access-ns = <0>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <18>;
+ gpmc,wr-access-ns = <42>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176 */
+ reg-io-width = <4>;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+};
+
+&mmc3 {
+ status = "disabled";
+};
--- /dev/null
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap3-overo-tobi-common.dtsi"
+
+/ {
+ model = "OMAP35xx Gumstix Overo on Tobi";
+ compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
/*
* The Gumstix Overo must be combined with an expansion board.
*/
-/dts-v1/;
-
-#include "omap34xx.dtsi"
/ {
pwmleds {
+++ /dev/null
-/*
- * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Tobi expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo.dtsi"
-
-/ {
- model = "TI OMAP3 Gumstix Overo on Tobi";
- compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3";
-
- leds {
- compatible = "gpio-leds";
- heartbeat {
- label = "overo:red:gpio21";
- gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- vddvario: regulator-vddvario {
- compatible = "regulator-fixed";
- regulator-name = "vddvario";
- regulator-always-on;
- };
-
- vdd33a: regulator-vdd33a {
- compatible = "regulator-fixed";
- regulator-name = "vdd33a";
- regulator-always-on;
- };
-};
-
-&gpmc {
- ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
-
- ethernet@5,0 {
- compatible = "smsc,lan9221", "smsc,lan9115";
- reg = <5 0 0xff>;
- bank-width = <2>;
-
- gpmc,mux-add-data;
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <42>;
- gpmc,cs-wr-off-ns = <36>;
- gpmc,adv-on-ns = <6>;
- gpmc,adv-rd-off-ns = <12>;
- gpmc,adv-wr-off-ns = <12>;
- gpmc,oe-on-ns = <0>;
- gpmc,oe-off-ns = <42>;
- gpmc,we-on-ns = <0>;
- gpmc,we-off-ns = <36>;
- gpmc,rd-cycle-ns = <60>;
- gpmc,wr-cycle-ns = <54>;
- gpmc,access-ns = <36>;
- gpmc,page-burst-access-ns = <0>;
- gpmc,bus-turnaround-ns = <0>;
- gpmc,cycle2cycle-delay-ns = <0>;
- gpmc,wr-data-mux-bus-ns = <18>;
- gpmc,wr-access-ns = <42>;
- gpmc,cycle2cycle-samecsen;
- gpmc,cycle2cycle-diffcsen;
-
- interrupt-parent = <&gpio6>;
- interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176 */
- reg-io-width = <4>;
- };
-};
-
-&i2c3 {
- clock-frequency = <100000>;
-};
-
-&mmc3 {
- status = "disabled";
-};
.register_dev = 1,
.hmc_mode = 16,
.pins[0] = 6,
+ .extcon = "tahvo-usb",
};
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
bool "TI OMAP5"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
+ select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
select ARM_GIC
select CPU_V7
bool "TI AM33XX"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
+ select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
select CPU_V7
select MULTI_IRQ_HANDLER
depends on ARCH_MULTI_V7
select CPU_V7
select ARCH_OMAP2PLUS
+ select ARCH_HAS_OPP
select MULTI_IRQ_HANDLER
select ARM_GIC
select MACH_OMAP_GENERIC
bool "TI DRA7XX"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
+ select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
select ARM_GIC
select CPU_V7
default y
select OMAP_PACKAGE_CBB
-config MACH_NOKIA_N800
- bool
-
config MACH_NOKIA_N810
bool
bool "Nokia N800/N810"
depends on SOC_OMAP2420
default y
- select MACH_NOKIA_N800
select MACH_NOKIA_N810
select MACH_NOKIA_N810_WIMAX
select OMAP_PACKAGE_ZAC
of_property_read_bool(np, "gpmc,time-para-granularity");
}
-#ifdef CONFIG_MTD_NAND
+#if IS_ENABLED(CONFIG_MTD_NAND)
static const char * const nand_xfer_types[] = {
[NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled",
}
#endif
-#ifdef CONFIG_MTD_ONENAND
+#if IS_ENABLED(CONFIG_MTD_ONENAND)
static int gpmc_probe_onenand_child(struct platform_device *pdev,
struct device_node *child)
{
.length = L4_EMU_34XX_SIZE,
.type = MT_DEVICE
},
-#if defined(CONFIG_DEBUG_LL) && \
- (defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3))
- {
- .virtual = ZOOM_UART_VIRT,
- .pfn = __phys_to_pfn(ZOOM_UART_BASE),
- .length = SZ_1M,
- .type = MT_DEVICE
- },
-#endif
};
#endif