i2c-ibm_iic: Whitespace cleanup
authorStefan Roese <sr@denx.de>
Sun, 27 Jan 2008 17:14:45 +0000 (18:14 +0100)
committerJean Delvare <khali@hyperion.delvare>
Sun, 27 Jan 2008 17:14:45 +0000 (18:14 +0100)
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
drivers/i2c/busses/i2c-ibm_iic.c
drivers/i2c/busses/i2c-ibm_iic.h

index 9b43ff7270d0213db406e034ec486e78af984336..d0cf39b8c1f164cf410f9edb0ca034ed81c6e5db 100644 (file)
@@ -6,7 +6,7 @@
  * Copyright (c) 2003, 2004 Zultys Technologies.
  * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
  *
- * Based on original work by 
+ * Based on original work by
  *     Ian DaSilva  <idasilva@mvista.com>
  *      Armin Kuster <akuster@mvista.com>
  *     Matt Porter  <mporter@mvista.com>
@@ -86,8 +86,8 @@ static void dump_iic_regs(const char* header, struct ibm_iic_private* dev)
               KERN_DEBUG "  sts      = 0x%02x, extsts = 0x%02x\n"
               KERN_DEBUG "  clkdiv   = 0x%02x, xfrcnt = 0x%02x\n"
               KERN_DEBUG "  xtcntlss = 0x%02x, directcntl = 0x%02x\n",
-               in_8(&iic->cntl), in_8(&iic->mdcntl), in_8(&iic->sts), 
-               in_8(&iic->extsts), in_8(&iic->clkdiv), in_8(&iic->xfrcnt), 
+               in_8(&iic->cntl), in_8(&iic->mdcntl), in_8(&iic->sts),
+               in_8(&iic->extsts), in_8(&iic->clkdiv), in_8(&iic->xfrcnt),
                in_8(&iic->xtcntlss), in_8(&iic->directcntl));
 }
 #  define DUMP_REGS(h,dev)     dump_iic_regs((h),(dev))
@@ -125,7 +125,7 @@ static inline void iic_interrupt_mode(struct ibm_iic_private* dev, int enable)
 {
        out_8(&dev->vaddr->intmsk, enable ? INTRMSK_EIMTC : 0);
 }
+
 /*
  * Initialize IIC interface.
  */
@@ -134,7 +134,7 @@ static void iic_dev_init(struct ibm_iic_private* dev)
        volatile struct iic_regs __iomem *iic = dev->vaddr;
 
        DBG("%d: init\n", dev->idx);
-       
+
        /* Clear master address */
        out_8(&iic->lmadr, 0);
        out_8(&iic->hmadr, 0);
@@ -160,7 +160,7 @@ static void iic_dev_init(struct ibm_iic_private* dev)
 
        /* Clear control register */
        out_8(&iic->cntl, 0);
-       
+
        /* Enable interrupts if possible */
        iic_interrupt_mode(dev, dev->irq >= 0);
 
@@ -171,7 +171,7 @@ static void iic_dev_init(struct ibm_iic_private* dev)
        DUMP_REGS("iic_init", dev);
 }
 
-/* 
+/*
  * Reset IIC interface
  */
 static void iic_dev_reset(struct ibm_iic_private* dev)
@@ -179,42 +179,42 @@ static void iic_dev_reset(struct ibm_iic_private* dev)
        volatile struct iic_regs __iomem *iic = dev->vaddr;
        int i;
        u8 dc;
-       
+
        DBG("%d: soft reset\n", dev->idx);
        DUMP_REGS("reset", dev);
-       
+
        /* Place chip in the reset state */
        out_8(&iic->xtcntlss, XTCNTLSS_SRST);
-       
+
        /* Check if bus is free */
-       dc = in_8(&iic->directcntl);    
+       dc = in_8(&iic->directcntl);
        if (!DIRCTNL_FREE(dc)){
                DBG("%d: trying to regain bus control\n", dev->idx);
-       
+
                /* Try to set bus free state */
-               out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC);    
-       
+               out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC);
+
                /* Wait until we regain bus control */
                for (i = 0; i < 100; ++i){
                        dc = in_8(&iic->directcntl);
                        if (DIRCTNL_FREE(dc))
                                break;
-                       
+
                        /* Toggle SCL line */
                        dc ^= DIRCNTL_SCC;
                        out_8(&iic->directcntl, dc);
                        udelay(10);
                        dc ^= DIRCNTL_SCC;
                        out_8(&iic->directcntl, dc);
-                       
+
                        /* be nice */
                        cond_resched();
                }
        }
-       
+
        /* Remove reset */
        out_8(&iic->xtcntlss, 0);
-       
+
        /* Reinitialize interface */
        iic_dev_init(dev);
 }
@@ -324,14 +324,14 @@ static irqreturn_t iic_handler(int irq, void *dev_id)
 {
        struct ibm_iic_private* dev = (struct ibm_iic_private*)dev_id;
        volatile struct iic_regs __iomem *iic = dev->vaddr;
-       
-       DBG2("%d: irq handler, STS = 0x%02x, EXTSTS = 0x%02x\n", 
+
+       DBG2("%d: irq handler, STS = 0x%02x, EXTSTS = 0x%02x\n",
             dev->idx, in_8(&iic->sts), in_8(&iic->extsts));
-       
+
        /* Acknowledge IRQ and wakeup iic_wait_for_tc */
        out_8(&iic->sts, STS_IRQA | STS_SCMP);
        wake_up_interruptible(&dev->wq);
-       
+
        return IRQ_HANDLED;
 }
 
@@ -341,19 +341,19 @@ static irqreturn_t iic_handler(int irq, void *dev_id)
  */
 static int iic_xfer_result(struct ibm_iic_private* dev)
 {
-       volatile struct iic_regs __iomem *iic = dev->vaddr;     
-       
+       volatile struct iic_regs __iomem *iic = dev->vaddr;
+
        if (unlikely(in_8(&iic->sts) & STS_ERR)){
-               DBG("%d: xfer error, EXTSTS = 0x%02x\n", dev->idx, 
+               DBG("%d: xfer error, EXTSTS = 0x%02x\n", dev->idx,
                        in_8(&iic->extsts));
-                               
+
                /* Clear errors and possible pending IRQs */
-               out_8(&iic->extsts, EXTSTS_IRQP | EXTSTS_IRQD | 
+               out_8(&iic->extsts, EXTSTS_IRQP | EXTSTS_IRQD |
                        EXTSTS_LA | EXTSTS_ICT | EXTSTS_XFRA);
-                       
+
                /* Flush master data buffer */
                out_8(&iic->mdcntl, in_8(&iic->mdcntl) | MDCNTL_FMDB);
-               
+
                /* Is bus free?
                 * If error happened during combined xfer
                 * IIC interface is usually stuck in some strange
@@ -376,11 +376,11 @@ static void iic_abort_xfer(struct ibm_iic_private* dev)
 {
        volatile struct iic_regs __iomem *iic = dev->vaddr;
        unsigned long x;
-       
+
        DBG("%d: iic_abort_xfer\n", dev->idx);
-       
+
        out_8(&iic->cntl, CNTL_HMT);
-       
+
        /*
         * Wait for the abort command to complete.
         * It's not worth to be optimized, just poll (timeout >= 1 tick)
@@ -405,13 +405,13 @@ static void iic_abort_xfer(struct ibm_iic_private* dev)
  * Returns the number of transferred bytes or error (<0)
  */
 static int iic_wait_for_tc(struct ibm_iic_private* dev){
-       
+
        volatile struct iic_regs __iomem *iic = dev->vaddr;
        int ret = 0;
-       
+
        if (dev->irq >= 0){
                /* Interrupt mode */
-               ret = wait_event_interruptible_timeout(dev->wq, 
+               ret = wait_event_interruptible_timeout(dev->wq,
                        !(in_8(&iic->sts) & STS_PT), dev->adap.timeout * HZ);
 
                if (unlikely(ret < 0))
@@ -424,37 +424,37 @@ static int iic_wait_for_tc(struct ibm_iic_private* dev){
        else {
                /* Polling mode */
                unsigned long x = jiffies + dev->adap.timeout * HZ;
-               
+
                while (in_8(&iic->sts) & STS_PT){
                        if (unlikely(time_after(jiffies, x))){
                                DBG("%d: poll timeout\n", dev->idx);
                                ret = -ETIMEDOUT;
                                break;
                        }
-               
+
                        if (unlikely(signal_pending(current))){
                                DBG("%d: poll interrupted\n", dev->idx);
                                ret = -ERESTARTSYS;
                                break;
                        }
                        schedule();
-               }       
+               }
        }
-       
+
        if (unlikely(ret < 0))
                iic_abort_xfer(dev);
        else
                ret = iic_xfer_result(dev);
-       
+
        DBG2("%d: iic_wait_for_tc -> %d\n", dev->idx, ret);
-       
+
        return ret;
 }
 
 /*
  * Low level master transfer routine
  */
-static int iic_xfer_bytes(struct ibm_iic_private* dev, struct i2c_msg* pm, 
+static int iic_xfer_bytes(struct ibm_iic_private* dev, struct i2c_msg* pm,
                          int combined_xfer)
 {
        volatile struct iic_regs __iomem *iic = dev->vaddr;
@@ -465,48 +465,48 @@ static int iic_xfer_bytes(struct ibm_iic_private* dev, struct i2c_msg* pm,
        u8 cntl = (in_8(&iic->cntl) & CNTL_AMD) | CNTL_PT;
        if (pm->flags & I2C_M_RD)
                cntl |= CNTL_RW;
-       
+
        loops = (len + 3) / 4;
        for (i = 0; i < loops; ++i, len -= 4){
                int count = len > 4 ? 4 : len;
                u8 cmd = cntl | ((count - 1) << CNTL_TCT_SHIFT);
-               
+
                if (!(cntl & CNTL_RW))
                        for (j = 0; j < count; ++j)
                                out_8((void __iomem *)&iic->mdbuf, *buf++);
-               
+
                if (i < loops - 1)
                        cmd |= CNTL_CHT;
                else if (combined_xfer)
                        cmd |= CNTL_RPST;
-               
+
                DBG2("%d: xfer_bytes, %d, CNTL = 0x%02x\n", dev->idx, count, cmd);
-               
+
                /* Start transfer */
                out_8(&iic->cntl, cmd);
-               
+
                /* Wait for completion */
                ret = iic_wait_for_tc(dev);
 
                if (unlikely(ret < 0))
                        break;
                else if (unlikely(ret != count)){
-                       DBG("%d: xfer_bytes, requested %d, transfered %d\n", 
+                       DBG("%d: xfer_bytes, requested %d, transfered %d\n",
                                dev->idx, count, ret);
-                       
+
                        /* If it's not a last part of xfer, abort it */
                        if (combined_xfer || (i < loops - 1))
                                iic_abort_xfer(dev);
-                               
+
                        ret = -EREMOTEIO;
-                       break;                          
+                       break;
                }
-               
+
                if (cntl & CNTL_RW)
                        for (j = 0; j < count; ++j)
                                *buf++ = in_8((void __iomem *)&iic->mdbuf);
        }
-       
+
        return ret > 0 ? 0 : ret;
 }
 
@@ -517,10 +517,10 @@ static inline void iic_address(struct ibm_iic_private* dev, struct i2c_msg* msg)
 {
        volatile struct iic_regs __iomem *iic = dev->vaddr;
        u16 addr = msg->addr;
-       
-       DBG2("%d: iic_address, 0x%03x (%d-bit)\n", dev->idx, 
+
+       DBG2("%d: iic_address, 0x%03x (%d-bit)\n", dev->idx,
                addr, msg->flags & I2C_M_TEN ? 10 : 7);
-       
+
        if (msg->flags & I2C_M_TEN){
            out_8(&iic->cntl, CNTL_AMD);
            out_8(&iic->lmadr, addr);
@@ -537,15 +537,15 @@ static inline int iic_invalid_address(const struct i2c_msg* p)
        return (p->addr > 0x3ff) || (!(p->flags & I2C_M_TEN) && (p->addr > 0x7f));
 }
 
-static inline int iic_address_neq(const struct i2c_msg* p1, 
+static inline int iic_address_neq(const struct i2c_msg* p1,
                                  const struct i2c_msg* p2)
 {
-       return (p1->addr != p2->addr) 
+       return (p1->addr != p2->addr)
                || ((p1->flags & I2C_M_TEN) != (p2->flags & I2C_M_TEN));
-} 
+}
 
 /*
- * Generic master transfer entrypoint. 
+ * Generic master transfer entrypoint.
  * Returns the number of processed messages or error (<0)
  */
 static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
@@ -553,20 +553,20 @@ static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
        struct ibm_iic_private* dev = (struct ibm_iic_private*)(i2c_get_adapdata(adap));
        volatile struct iic_regs __iomem *iic = dev->vaddr;
        int i, ret = 0;
-       
+
        DBG2("%d: iic_xfer, %d msg(s)\n", dev->idx, num);
-       
+
        if (!num)
                return 0;
-       
+
        /* Check the sanity of the passed messages.
         * Uhh, generic i2c layer is more suitable place for such code...
         */
        if (unlikely(iic_invalid_address(&msgs[0]))){
-               DBG("%d: invalid address 0x%03x (%d-bit)\n", dev->idx, 
+               DBG("%d: invalid address 0x%03x (%d-bit)\n", dev->idx,
                        msgs[0].addr, msgs[0].flags & I2C_M_TEN ? 10 : 7);
                return -EINVAL;
-       }               
+       }
        for (i = 0; i < num; ++i){
                if (unlikely(msgs[i].len <= 0)){
                        if (num == 1 && !msgs[0].len){
@@ -576,7 +576,7 @@ static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
                                 */
                                return iic_smbus_quick(dev, &msgs[0]);
                        }
-                       DBG("%d: invalid len %d in msg[%d]\n", dev->idx, 
+                       DBG("%d: invalid len %d in msg[%d]\n", dev->idx,
                                msgs[i].len, i);
                        return -EINVAL;
                }
@@ -585,34 +585,34 @@ static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
                        return -EINVAL;
                }
        }
-       
+
        /* Check bus state */
        if (unlikely((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE)){
                DBG("%d: iic_xfer, bus is not free\n", dev->idx);
-               
+
                /* Usually it means something serious has happend.
                 * We *cannot* have unfinished previous transfer
                 * so it doesn't make any sense to try to stop it.
-                * Probably we were not able to recover from the 
+                * Probably we were not able to recover from the
                 * previous error.
                 * The only *reasonable* thing I can think of here
                 * is soft reset.  --ebs
                 */
                iic_dev_reset(dev);
-               
+
                if ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){
                        DBG("%d: iic_xfer, bus is still not free\n", dev->idx);
                        return -EREMOTEIO;
                }
-       } 
+       }
        else {
                /* Flush master data buffer (just in case) */
                out_8(&iic->mdcntl, in_8(&iic->mdcntl) | MDCNTL_FMDB);
        }
-       
+
        /* Load slave address */
        iic_address(dev, &msgs[0]);
-       
+
        /* Do real transfer */
        for (i = 0; i < num && !ret; ++i)
                ret = iic_xfer_bytes(dev, &msgs[i], i < num - 1);
@@ -648,7 +648,7 @@ static inline u8 iic_clckdiv(unsigned int opb)
 
        /* Convert to MHz */
        opb /= 1000000;
-       
+
        if (opb < 20 || opb > 150){
                printk(KERN_CRIT "ibm-iic: invalid OPB clock frequency %u MHz\n",
                        opb);
@@ -666,7 +666,7 @@ static int __devinit iic_probe(struct ocp_device *ocp){
        struct i2c_adapter* adap;
        struct ocp_func_iic_data* iic_data = ocp->def->additions;
        int ret;
-       
+
        if (!iic_data)
                printk(KERN_WARNING"ibm-iic%d: missing additional data!\n",
                        ocp->def->index);
@@ -679,7 +679,7 @@ static int __devinit iic_probe(struct ocp_device *ocp){
 
        dev->idx = ocp->def->index;
        ocp_set_drvdata(ocp, dev);
-       
+
        if (!request_mem_region(ocp->def->paddr, sizeof(struct iic_regs),
                                "ibm_iic")) {
                ret = -EBUSY;
@@ -692,7 +692,7 @@ static int __devinit iic_probe(struct ocp_device *ocp){
                ret = -ENXIO;
                goto fail2;
        }
-       
+
        init_waitqueue_head(&dev->wq);
 
        dev->irq = iic_force_poll ? -1 : ocp->def->irq;
@@ -702,29 +702,29 @@ static int __devinit iic_probe(struct ocp_device *ocp){
                 */
                iic_interrupt_mode(dev, 0);
                if (request_irq(dev->irq, iic_handler, 0, "IBM IIC", dev)){
-                       printk(KERN_ERR "ibm-iic%d: request_irq %d failed\n", 
+                       printk(KERN_ERR "ibm-iic%d: request_irq %d failed\n",
                                dev->idx, dev->irq);
-                       /* Fallback to the polling mode */      
+                       /* Fallback to the polling mode */
                        dev->irq = -1;
                }
        }
-       
+
        if (dev->irq < 0)
-               printk(KERN_WARNING "ibm-iic%d: using polling mode\n", 
+               printk(KERN_WARNING "ibm-iic%d: using polling mode\n",
                        dev->idx);
-               
+
        /* Board specific settings */
        dev->fast_mode = iic_force_fast ? 1 : (iic_data ? iic_data->fast_mode : 0);
-       
-       /* clckdiv is the same for *all* IIC interfaces, 
+
+       /* clckdiv is the same for *all* IIC interfaces,
         * but I'd rather make a copy than introduce another global. --ebs
         */
        dev->clckdiv = iic_clckdiv(ocp_sys_info.opb_bus_freq);
        DBG("%d: clckdiv = %d\n", dev->idx, dev->clckdiv);
-       
+
        /* Initialize IIC interface */
        iic_dev_init(dev);
-       
+
        /* Register it with i2c layer */
        adap = &dev->adap;
        adap->dev.parent = &ocp->dev;
@@ -750,24 +750,24 @@ static int __devinit iic_probe(struct ocp_device *ocp){
                        dev->idx);
                goto fail;
        }
-       
+
        printk(KERN_INFO "ibm-iic%d: using %s mode\n", dev->idx,
                dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
 
        return 0;
 
-fail:  
+fail:
        if (dev->irq >= 0){
                iic_interrupt_mode(dev, 0);
                free_irq(dev->irq, dev);
-       }       
+       }
 
        iounmap(dev->vaddr);
-fail2: 
+fail2:
        release_mem_region(ocp->def->paddr, sizeof(struct iic_regs));
 fail1:
        ocp_set_drvdata(ocp, NULL);
-       kfree(dev);     
+       kfree(dev);
        return ret;
 }
 
@@ -783,13 +783,13 @@ static void __devexit iic_remove(struct ocp_device *ocp)
                        dev->idx);
                /* That's *very* bad, just shutdown IRQ ... */
                if (dev->irq >= 0){
-                   iic_interrupt_mode(dev, 0); 
+                   iic_interrupt_mode(dev, 0);
                    free_irq(dev->irq, dev);
                    dev->irq = -1;
                }
        } else {
                if (dev->irq >= 0){
-                   iic_interrupt_mode(dev, 0); 
+                   iic_interrupt_mode(dev, 0);
                    free_irq(dev->irq, dev);
                }
                iounmap(dev->vaddr);
@@ -798,7 +798,7 @@ static void __devexit iic_remove(struct ocp_device *ocp)
        }
 }
 
-static struct ocp_device_id ibm_iic_ids[] __devinitdata = 
+static struct ocp_device_id ibm_iic_ids[] __devinitdata =
 {
        { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_IIC },
        { .vendor = OCP_VENDOR_INVALID }
index 59d7b437f7ff3901683b8cfac9ff6930e5cfff71..fdaa48292cb650145a715074ea21a5a035ccef60 100644 (file)
@@ -2,11 +2,11 @@
  * drivers/i2c/busses/i2c-ibm_iic.h
  *
  * Support for the IIC peripheral on IBM PPC 4xx
- * 
+ *
  * Copyright (c) 2003 Zultys Technologies.
  * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
  *
- * Based on original work by 
+ * Based on original work by
  *     Ian DaSilva  <idasilva@mvista.com>
  *      Armin Kuster <akuster@mvista.com>
  *     Matt Porter  <mporter@mvista.com>
@@ -22,7 +22,7 @@
 #ifndef __I2C_IBM_IIC_H_
 #define __I2C_IBM_IIC_H_
 
-#include <linux/i2c.h> 
+#include <linux/i2c.h>
 
 struct iic_regs {
        u16 mdbuf;
@@ -58,7 +58,7 @@ struct ibm_iic_private {
 #define CNTL_TCT_MASK  0x30
 #define CNTL_TCT_SHIFT 4
 #define CNTL_RPST      0x08
-#define CNTL_CHT       0x04 
+#define CNTL_CHT       0x04
 #define CNTL_RW                0x02
 #define CNTL_PT                0x01