long (*round_rate)(struct clk_hw *hw,
unsigned long rate,
unsigned long *parent_rate);
- long (*determine_rate)(struct clk_hw *hw,
- unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk);
+ int (*determine_rate)(struct clk_hw *hw,
+ struct clk_rate_request *req);
int (*set_parent)(struct clk_hw *hw, u8 index);
u8 (*get_parent)(struct clk_hw *hw);
int (*set_rate)(struct clk_hw *hw,
--- /dev/null
+Binding for simple gpio clock multiplexer.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "gpio-mux-clock".
+- clocks: list of two references to parent clocks.
+- #clock-cells : from common clock binding; shall be set to 0.
+- select-gpios : GPIO reference for selecting the parent clock.
+
+Example:
+ clock {
+ compatible = "gpio-mux-clock";
+ clocks = <&parentclk1>, <&parentclk2>;
+ #clock-cells = <0>;
+ select-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
--- /dev/null
+* Rockchip RK3368 Clock and Reset Unit
+
+The RK3368 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3368-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing, pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_gmac" - external GMAC clock - optional
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_isp" - external ISP clock - optional,
+ - "ext_jtag" - external JTAG clock - optional
+ - "ext_vip" - external VIP clock - optional,
+ - "usbotg_out" - output clock of the pll in the otg phy
+
+Example: Clock controller node:
+
+ cru: clock-controller@ff760000 {
+ compatible = "rockchip,rk3368-cru";
+ reg = <0x0 0xff760000 0x0 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@10124000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10124000 0x400>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&cru SCLK_UART0>;
+ };
* Licensed under GPLv2 or later.
*/
-#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_platform.h>
* published by the Free Software Foundation.
*/
-#include <linux/clk-provider.h>
#include <linux/clocksource.h>
#include <linux/irqchip.h>
#include <linux/pm_runtime.h>
#include <linux/pm_clock.h>
#include <linux/platform_device.h>
-#include <linux/clk-provider.h>
#include <linux/of.h>
static struct dev_pm_domain keystone_pm_domain = {
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/clk-provider.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
hwmod-common = omap_hwmod.o omap_hwmod_reset.o \
omap_hwmod_common_data.o
-clock-common = clock.o clock_common_data.o \
- clkt_dpll.o clkt_clksel.o
+clock-common = clock.o
secure-common = omap-smc.o omap-secure.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_SOC_DRA7XX) += clockdomains7xx_data.o
# Clock framework
-obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
+obj-$(CONFIG_ARCH_OMAP2) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
-obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o
-obj-$(CONFIG_SOC_OMAP2430) += clock2430.o
-obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
-obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
-obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o
-obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o
-obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o
+obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
+obj-$(CONFIG_ARCH_OMAP3) += $(clock-common)
+obj-$(CONFIG_ARCH_OMAP3) += clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
-obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o
-obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
+obj-$(CONFIG_SOC_AM33XX) += $(clock-common)
obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
-obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o
obj-$(CONFIG_SOC_DRA7XX) += $(clock-common)
-obj-$(CONFIG_SOC_DRA7XX) += dpll3xxx.o dpll44xx.o
-obj-$(CONFIG_SOC_AM43XX) += $(clock-common) dpll3xxx.o
+obj-$(CONFIG_SOC_AM43XX) += $(clock-common)
# OMAP2 clock rate set data (old "OPP" data)
obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
#include "clock.h"
#include "clock3xxx.h"
-#include "clock34xx.h"
#include "sdrc.h"
#include "sram.h"
#define CYCLES_PER_MHZ 1000000
+struct clk *sdrc_ick_p, *arm_fck_p;
+
/*
* CORE DPLL (DPLL3) M2 divider rate programming functions
*
if (!clk || !rate)
return -EINVAL;
- validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+ new_div = DIV_ROUND_UP(parent_rate, rate);
+ validrate = parent_rate / new_div;
+
if (validrate != rate)
return -EINVAL;
+++ /dev/null
-/*
- * clkt_clksel.c - OMAP2/3/4 clksel clock functions
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- * clksel clocks are clocks that do not have a fixed parent, or that
- * can divide their parent's rate, or possibly both at the same time, based
- * on the contents of a hardware register bitfield.
- *
- * All of the various mux and divider settings can be encoded into
- * struct clksel* data structures, and then these can be autogenerated
- * from some hardware database for each new chip generation. This
- * should avoid the need to write, review, and validate a lot of new
- * clock code for each new chip, since it can be exported from the SoC
- * design flow. This is now done on OMAP4.
- *
- * The fusion of mux and divider clocks is a software creation. In
- * hardware reality, the multiplexer (parent selection) and the
- * divider exist separately. XXX At some point these clksel clocks
- * should be split into "divider" clocks and "mux" clocks to better
- * match the hardware.
- *
- * (The name "clksel" comes from the name of the corresponding
- * register field in the OMAP2/3 family of SoCs.)
- *
- * XXX Currently these clocks are only used in the OMAP2/3/4 code, but
- * many of the OMAP1 clocks should be convertible to use this
- * mechanism.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-#include <linux/bug.h>
-
-#include "clock.h"
-
-/* Private functions */
-
-/**
- * _get_clksel_by_parent() - return clksel struct for a given clk & parent
- * @clk: OMAP struct clk ptr to inspect
- * @src_clk: OMAP struct clk ptr of the parent clk to search for
- *
- * Scan the struct clksel array associated with the clock to find
- * the element associated with the supplied parent clock address.
- * Returns a pointer to the struct clksel on success or NULL on error.
- */
-static const struct clksel *_get_clksel_by_parent(struct clk_hw_omap *clk,
- struct clk *src_clk)
-{
- const struct clksel *clks;
-
- if (!src_clk)
- return NULL;
-
- for (clks = clk->clksel; clks->parent; clks++)
- if (clks->parent == src_clk)
- break; /* Found the requested parent */
-
- if (!clks->parent) {
- /* This indicates a data problem */
- WARN(1, "clock: %s: could not find parent clock %s in clksel array\n",
- __clk_get_name(clk->hw.clk), __clk_get_name(src_clk));
- return NULL;
- }
-
- return clks;
-}
-
-/**
- * _write_clksel_reg() - program a clock's clksel register in hardware
- * @clk: struct clk * to program
- * @v: clksel bitfield value to program (with LSB at bit 0)
- *
- * Shift the clksel register bitfield value @v to its appropriate
- * location in the clksel register and write it in. This function
- * will ensure that the write to the clksel_reg reaches its
- * destination before returning -- important since PRM and CM register
- * accesses can be quite slow compared to ARM cycles -- but does not
- * take into account any time the hardware might take to switch the
- * clock source.
- */
-static void _write_clksel_reg(struct clk_hw_omap *clk, u32 field_val)
-{
- u32 v;
-
- v = omap2_clk_readl(clk, clk->clksel_reg);
- v &= ~clk->clksel_mask;
- v |= field_val << __ffs(clk->clksel_mask);
- omap2_clk_writel(v, clk, clk->clksel_reg);
-
- v = omap2_clk_readl(clk, clk->clksel_reg); /* OCP barrier */
-}
-
-/**
- * _clksel_to_divisor() - turn clksel field value into integer divider
- * @clk: OMAP struct clk to use
- * @field_val: register field value to find
- *
- * Given a struct clk of a rate-selectable clksel clock, and a register field
- * value to search for, find the corresponding clock divisor. The register
- * field value should be pre-masked and shifted down so the LSB is at bit 0
- * before calling. Returns 0 on error or returns the actual integer divisor
- * upon success.
- */
-static u32 _clksel_to_divisor(struct clk_hw_omap *clk, u32 field_val)
-{
- const struct clksel *clks;
- const struct clksel_rate *clkr;
- struct clk *parent;
-
- parent = __clk_get_parent(clk->hw.clk);
-
- clks = _get_clksel_by_parent(clk, parent);
- if (!clks)
- return 0;
-
- for (clkr = clks->rates; clkr->div; clkr++) {
- if (!(clkr->flags & cpu_mask))
- continue;
-
- if (clkr->val == field_val)
- break;
- }
-
- if (!clkr->div) {
- /* This indicates a data error */
- WARN(1, "clock: %s: could not find fieldval %d for parent %s\n",
- __clk_get_name(clk->hw.clk), field_val,
- __clk_get_name(parent));
- return 0;
- }
-
- return clkr->div;
-}
-
-/**
- * _divisor_to_clksel() - turn clksel integer divisor into a field value
- * @clk: OMAP struct clk to use
- * @div: integer divisor to search for
- *
- * Given a struct clk of a rate-selectable clksel clock, and a clock
- * divisor, find the corresponding register field value. Returns the
- * register field value _before_ left-shifting (i.e., LSB is at bit
- * 0); or returns 0xFFFFFFFF (~0) upon error.
- */
-static u32 _divisor_to_clksel(struct clk_hw_omap *clk, u32 div)
-{
- const struct clksel *clks;
- const struct clksel_rate *clkr;
- struct clk *parent;
-
- /* should never happen */
- WARN_ON(div == 0);
-
- parent = __clk_get_parent(clk->hw.clk);
- clks = _get_clksel_by_parent(clk, parent);
- if (!clks)
- return ~0;
-
- for (clkr = clks->rates; clkr->div; clkr++) {
- if (!(clkr->flags & cpu_mask))
- continue;
-
- if (clkr->div == div)
- break;
- }
-
- if (!clkr->div) {
- pr_err("clock: %s: could not find divisor %d for parent %s\n",
- __clk_get_name(clk->hw.clk), div,
- __clk_get_name(parent));
- return ~0;
- }
-
- return clkr->val;
-}
-
-/**
- * _read_divisor() - get current divisor applied to parent clock (from hdwr)
- * @clk: OMAP struct clk to use.
- *
- * Read the current divisor register value for @clk that is programmed
- * into the hardware, convert it into the actual divisor value, and
- * return it; or return 0 on error.
- */
-static u32 _read_divisor(struct clk_hw_omap *clk)
-{
- u32 v;
-
- if (!clk->clksel || !clk->clksel_mask)
- return 0;
-
- v = omap2_clk_readl(clk, clk->clksel_reg);
- v &= clk->clksel_mask;
- v >>= __ffs(clk->clksel_mask);
-
- return _clksel_to_divisor(clk, v);
-}
-
-/* Public functions */
-
-/**
- * omap2_clksel_round_rate_div() - find divisor for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- * @new_div: ptr to where we should store the divisor
- *
- * Finds 'best' divider value in an array based on the source and target
- * rates. The divider array must be sorted with smallest divider first.
- * This function is also used by the DPLL3 M2 divider code.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
- */
-u32 omap2_clksel_round_rate_div(struct clk_hw_omap *clk,
- unsigned long target_rate,
- u32 *new_div)
-{
- unsigned long test_rate;
- const struct clksel *clks;
- const struct clksel_rate *clkr;
- u32 last_div = 0;
- struct clk *parent;
- unsigned long parent_rate;
- const char *clk_name;
-
- parent = __clk_get_parent(clk->hw.clk);
- clk_name = __clk_get_name(clk->hw.clk);
- parent_rate = __clk_get_rate(parent);
-
- if (!clk->clksel || !clk->clksel_mask)
- return ~0;
-
- pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
- clk_name, target_rate);
-
- *new_div = 1;
-
- clks = _get_clksel_by_parent(clk, parent);
- if (!clks)
- return ~0;
-
- for (clkr = clks->rates; clkr->div; clkr++) {
- if (!(clkr->flags & cpu_mask))
- continue;
-
- /* Sanity check */
- if (clkr->div <= last_div)
- pr_err("clock: %s: clksel_rate table not sorted\n",
- clk_name);
-
- last_div = clkr->div;
-
- test_rate = parent_rate / clkr->div;
-
- if (test_rate <= target_rate)
- break; /* found it */
- }
-
- if (!clkr->div) {
- pr_err("clock: %s: could not find divisor for target rate %ld for parent %s\n",
- clk_name, target_rate, __clk_get_name(parent));
- return ~0;
- }
-
- *new_div = clkr->div;
-
- pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
- (parent_rate / clkr->div));
-
- return parent_rate / clkr->div;
-}
-
-/*
- * Clocktype interface functions to the OMAP clock code
- * (i.e., those used in struct clk field function pointers, etc.)
- */
-
-/**
- * omap2_clksel_find_parent_index() - return the array index of the current
- * hardware parent of @hw
- * @hw: struct clk_hw * to find the current hardware parent of
- *
- * Given a struct clk_hw pointer @hw to the 'hw' member of a struct
- * clk_hw_omap record representing a source-selectable hardware clock,
- * read the hardware register and determine what its parent is
- * currently set to. Intended to be called only by the common clock
- * framework struct clk_hw_ops.get_parent function pointer. Return
- * the array index of this parent clock upon success -- there is no
- * way to return an error, so if we encounter an error, just WARN()
- * and pretend that we know that we're doing.
- */
-u8 omap2_clksel_find_parent_index(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- const struct clksel *clks;
- const struct clksel_rate *clkr;
- u32 r, found = 0;
- struct clk *parent;
- const char *clk_name;
- int ret = 0, f = 0;
-
- parent = __clk_get_parent(hw->clk);
- clk_name = __clk_get_name(hw->clk);
-
- /* XXX should be able to return an error */
- WARN((!clk->clksel || !clk->clksel_mask),
- "clock: %s: attempt to call on a non-clksel clock", clk_name);
-
- r = omap2_clk_readl(clk, clk->clksel_reg) & clk->clksel_mask;
- r >>= __ffs(clk->clksel_mask);
-
- for (clks = clk->clksel; clks->parent && !found; clks++) {
- for (clkr = clks->rates; clkr->div && !found; clkr++) {
- if (!(clkr->flags & cpu_mask))
- continue;
-
- if (clkr->val == r) {
- found = 1;
- ret = f;
- }
- }
- f++;
- }
-
- /* This indicates a data error */
- WARN(!found, "clock: %s: init parent: could not find regval %0x\n",
- clk_name, r);
-
- return ret;
-}
-
-
-/**
- * omap2_clksel_recalc() - function ptr to pass via struct clk .recalc field
- * @clk: struct clk *
- *
- * This function is intended to be called only by the clock framework.
- * Each clksel clock should have its struct clk .recalc field set to this
- * function. Returns the clock's current rate, based on its parent's rate
- * and its current divisor setting in the hardware.
- */
-unsigned long omap2_clksel_recalc(struct clk_hw *hw, unsigned long parent_rate)
-{
- unsigned long rate;
- u32 div = 0;
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-
- if (!parent_rate)
- return 0;
-
- div = _read_divisor(clk);
- if (!div)
- rate = parent_rate;
- else
- rate = parent_rate / div;
-
- pr_debug("%s: recalc'd %s's rate to %lu (div %d)\n", __func__,
- __clk_get_name(hw->clk), rate, div);
-
- return rate;
-}
-
-/**
- * omap2_clksel_round_rate() - find rounded rate for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- *
- * This function is intended to be called only by the clock framework.
- * Finds best target rate based on the source clock and possible dividers.
- * rates. The divider array must be sorted with smallest divider first.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
- */
-long omap2_clksel_round_rate(struct clk_hw *hw, unsigned long target_rate,
- unsigned long *parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 new_div;
-
- return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
-}
-
-/**
- * omap2_clksel_set_rate() - program clock rate in hardware
- * @clk: struct clk * to program rate
- * @rate: target rate to program
- *
- * This function is intended to be called only by the clock framework.
- * Program @clk's rate to @rate in the hardware. The clock can be
- * either enabled or disabled when this happens, although if the clock
- * is enabled, some downstream devices may glitch or behave
- * unpredictably when the clock rate is changed - this depends on the
- * hardware. This function does not currently check the usecount of
- * the clock, so if multiple drivers are using the clock, and the rate
- * is changed, they will all be affected without any notification.
- * Returns -EINVAL upon error, or 0 upon success.
- */
-int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 field_val, validrate, new_div = 0;
-
- if (!clk->clksel || !clk->clksel_mask)
- return -EINVAL;
-
- validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
- if (validrate != rate)
- return -EINVAL;
-
- field_val = _divisor_to_clksel(clk, new_div);
- if (field_val == ~0)
- return -EINVAL;
-
- _write_clksel_reg(clk, field_val);
-
- pr_debug("clock: %s: set rate to %ld\n", __clk_get_name(hw->clk),
- __clk_get_rate(hw->clk));
-
- return 0;
-}
-
-/*
- * Clksel parent setting function - not passed in struct clk function
- * pointer - instead, the OMAP clock code currently assumes that any
- * parent-setting clock is a clksel clock, and calls
- * omap2_clksel_set_parent() by default
- */
-
-/**
- * omap2_clksel_set_parent() - change a clock's parent clock
- * @clk: struct clk * of the child clock
- * @new_parent: struct clk * of the new parent clock
- *
- * This function is intended to be called only by the clock framework.
- * Change the parent clock of clock @clk to @new_parent. This is
- * intended to be used while @clk is disabled. This function does not
- * currently check the usecount of the clock, so if multiple drivers
- * are using the clock, and the parent is changed, they will all be
- * affected without any notification. Returns -EINVAL upon error, or
- * 0 upon success.
- */
-int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-
- if (!clk->clksel || !clk->clksel_mask)
- return -EINVAL;
-
- _write_clksel_reg(clk, field_val);
- return 0;
-}
+++ /dev/null
-/*
- * OMAP2/3/4 DPLL clock functions
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-
-#include <asm/div64.h>
-
-#include "clock.h"
-
-/* DPLL rate rounding: minimum DPLL multiplier, divider values */
-#define DPLL_MIN_MULTIPLIER 2
-#define DPLL_MIN_DIVIDER 1
-
-/* Possible error results from _dpll_test_mult */
-#define DPLL_MULT_UNDERFLOW -1
-
-/*
- * Scale factor to mitigate roundoff errors in DPLL rate rounding.
- * The higher the scale factor, the greater the risk of arithmetic overflow,
- * but the closer the rounded rate to the target rate. DPLL_SCALE_FACTOR
- * must be a power of DPLL_SCALE_BASE.
- */
-#define DPLL_SCALE_FACTOR 64
-#define DPLL_SCALE_BASE 2
-#define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \
- (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
-
-/*
- * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
- * From device data manual section 4.3 "DPLL and DLL Specifications".
- */
-#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN 500000
-#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX 2500000
-
-/* _dpll_test_fint() return codes */
-#define DPLL_FINT_UNDERFLOW -1
-#define DPLL_FINT_INVALID -2
-
-/* Private functions */
-
-/*
- * _dpll_test_fint - test whether an Fint value is valid for the DPLL
- * @clk: DPLL struct clk to test
- * @n: divider value (N) to test
- *
- * Tests whether a particular divider @n will result in a valid DPLL
- * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
- * Correction". Returns 0 if OK, -1 if the enclosing loop can terminate
- * (assuming that it is counting N upwards), or -2 if the enclosing loop
- * should skip to the next iteration (again assuming N is increasing).
- */
-static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
-{
- struct dpll_data *dd;
- long fint, fint_min, fint_max;
- int ret = 0;
-
- dd = clk->dpll_data;
-
- /* DPLL divider must result in a valid jitter correction val */
- fint = __clk_get_rate(__clk_get_parent(clk->hw.clk)) / n;
-
- if (dd->flags & DPLL_J_TYPE) {
- fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
- fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
- } else {
- fint_min = ti_clk_features.fint_min;
- fint_max = ti_clk_features.fint_max;
- }
-
- if (!fint_min || !fint_max) {
- WARN(1, "No fint limits available!\n");
- return DPLL_FINT_INVALID;
- }
-
- if (fint < ti_clk_features.fint_min) {
- pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
- n);
- dd->max_divider = n;
- ret = DPLL_FINT_UNDERFLOW;
- } else if (fint > ti_clk_features.fint_max) {
- pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
- n);
- dd->min_divider = n;
- ret = DPLL_FINT_INVALID;
- } else if (fint > ti_clk_features.fint_band1_max &&
- fint < ti_clk_features.fint_band2_min) {
- pr_debug("rejecting n=%d due to Fint failure\n", n);
- ret = DPLL_FINT_INVALID;
- }
-
- return ret;
-}
-
-static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
- unsigned int m, unsigned int n)
-{
- unsigned long long num;
-
- num = (unsigned long long)parent_rate * m;
- do_div(num, n);
- return num;
-}
-
-/*
- * _dpll_test_mult - test a DPLL multiplier value
- * @m: pointer to the DPLL m (multiplier) value under test
- * @n: current DPLL n (divider) value under test
- * @new_rate: pointer to storage for the resulting rounded rate
- * @target_rate: the desired DPLL rate
- * @parent_rate: the DPLL's parent clock rate
- *
- * This code tests a DPLL multiplier value, ensuring that the
- * resulting rate will not be higher than the target_rate, and that
- * the multiplier value itself is valid for the DPLL. Initially, the
- * integer pointed to by the m argument should be prescaled by
- * multiplying by DPLL_SCALE_FACTOR. The code will replace this with
- * a non-scaled m upon return. This non-scaled m will result in a
- * new_rate as close as possible to target_rate (but not greater than
- * target_rate) given the current (parent_rate, n, prescaled m)
- * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
- * non-scaled m attempted to underflow, which can allow the calling
- * function to bail out early; or 0 upon success.
- */
-static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
- unsigned long target_rate,
- unsigned long parent_rate)
-{
- int r = 0, carry = 0;
-
- /* Unscale m and round if necessary */
- if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
- carry = 1;
- *m = (*m / DPLL_SCALE_FACTOR) + carry;
-
- /*
- * The new rate must be <= the target rate to avoid programming
- * a rate that is impossible for the hardware to handle
- */
- *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
- if (*new_rate > target_rate) {
- (*m)--;
- *new_rate = 0;
- }
-
- /* Guard against m underflow */
- if (*m < DPLL_MIN_MULTIPLIER) {
- *m = DPLL_MIN_MULTIPLIER;
- *new_rate = 0;
- r = DPLL_MULT_UNDERFLOW;
- }
-
- if (*new_rate == 0)
- *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
-
- return r;
-}
-
-/**
- * _omap2_dpll_is_in_bypass - check if DPLL is in bypass mode or not
- * @v: bitfield value of the DPLL enable
- *
- * Checks given DPLL enable bitfield to see whether the DPLL is in bypass
- * mode or not. Returns 1 if the DPLL is in bypass, 0 otherwise.
- */
-static int _omap2_dpll_is_in_bypass(u32 v)
-{
- u8 mask, val;
-
- mask = ti_clk_features.dpll_bypass_vals;
-
- /*
- * Each set bit in the mask corresponds to a bypass value equal
- * to the bitshift. Go through each set-bit in the mask and
- * compare against the given register value.
- */
- while (mask) {
- val = __ffs(mask);
- mask ^= (1 << val);
- if (v == val)
- return 1;
- }
-
- return 0;
-}
-
-/* Public functions */
-u8 omap2_init_dpll_parent(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 v;
- struct dpll_data *dd;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- v = omap2_clk_readl(clk, dd->control_reg);
- v &= dd->enable_mask;
- v >>= __ffs(dd->enable_mask);
-
- /* Reparent the struct clk in case the dpll is in bypass */
- if (_omap2_dpll_is_in_bypass(v))
- return 1;
-
- return 0;
-}
-
-/**
- * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
- * @clk: struct clk * of a DPLL
- *
- * DPLLs can be locked or bypassed - basically, enabled or disabled.
- * When locked, the DPLL output depends on the M and N values. When
- * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
- * or sys_clk. Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
- * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
- * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
- * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
- * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
- * if the clock @clk is not a DPLL.
- */
-unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
-{
- long long dpll_clk;
- u32 dpll_mult, dpll_div, v;
- struct dpll_data *dd;
-
- dd = clk->dpll_data;
- if (!dd)
- return 0;
-
- /* Return bypass rate if DPLL is bypassed */
- v = omap2_clk_readl(clk, dd->control_reg);
- v &= dd->enable_mask;
- v >>= __ffs(dd->enable_mask);
-
- if (_omap2_dpll_is_in_bypass(v))
- return __clk_get_rate(dd->clk_bypass);
-
- v = omap2_clk_readl(clk, dd->mult_div1_reg);
- dpll_mult = v & dd->mult_mask;
- dpll_mult >>= __ffs(dd->mult_mask);
- dpll_div = v & dd->div1_mask;
- dpll_div >>= __ffs(dd->div1_mask);
-
- dpll_clk = (long long) __clk_get_rate(dd->clk_ref) * dpll_mult;
- do_div(dpll_clk, dpll_div + 1);
-
- return dpll_clk;
-}
-
-/* DPLL rate rounding code */
-
-/**
- * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
- * @clk: struct clk * for a DPLL
- * @target_rate: desired DPLL clock rate
- *
- * Given a DPLL and a desired target rate, round the target rate to a
- * possible, programmable rate for this DPLL. Attempts to select the
- * minimum possible n. Stores the computed (m, n) in the DPLL's
- * dpll_data structure so set_rate() will not need to call this
- * (expensive) function again. Returns ~0 if the target rate cannot
- * be rounded, or the rounded rate upon success.
- */
-long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
- unsigned long *parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- int m, n, r, scaled_max_m;
- int min_delta_m = INT_MAX, min_delta_n = INT_MAX;
- unsigned long scaled_rt_rp;
- unsigned long new_rate = 0;
- struct dpll_data *dd;
- unsigned long ref_rate;
- long delta;
- long prev_min_delta = LONG_MAX;
- const char *clk_name;
-
- if (!clk || !clk->dpll_data)
- return ~0;
-
- dd = clk->dpll_data;
-
- ref_rate = __clk_get_rate(dd->clk_ref);
- clk_name = __clk_get_name(hw->clk);
- pr_debug("clock: %s: starting DPLL round_rate, target rate %lu\n",
- clk_name, target_rate);
-
- scaled_rt_rp = target_rate / (ref_rate / DPLL_SCALE_FACTOR);
- scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
-
- dd->last_rounded_rate = 0;
-
- for (n = dd->min_divider; n <= dd->max_divider; n++) {
-
- /* Is the (input clk, divider) pair valid for the DPLL? */
- r = _dpll_test_fint(clk, n);
- if (r == DPLL_FINT_UNDERFLOW)
- break;
- else if (r == DPLL_FINT_INVALID)
- continue;
-
- /* Compute the scaled DPLL multiplier, based on the divider */
- m = scaled_rt_rp * n;
-
- /*
- * Since we're counting n up, a m overflow means we
- * can bail out completely (since as n increases in
- * the next iteration, there's no way that m can
- * increase beyond the current m)
- */
- if (m > scaled_max_m)
- break;
-
- r = _dpll_test_mult(&m, n, &new_rate, target_rate,
- ref_rate);
-
- /* m can't be set low enough for this n - try with a larger n */
- if (r == DPLL_MULT_UNDERFLOW)
- continue;
-
- /* skip rates above our target rate */
- delta = target_rate - new_rate;
- if (delta < 0)
- continue;
-
- if (delta < prev_min_delta) {
- prev_min_delta = delta;
- min_delta_m = m;
- min_delta_n = n;
- }
-
- pr_debug("clock: %s: m = %d: n = %d: new_rate = %lu\n",
- clk_name, m, n, new_rate);
-
- if (delta == 0)
- break;
- }
-
- if (prev_min_delta == LONG_MAX) {
- pr_debug("clock: %s: cannot round to rate %lu\n",
- clk_name, target_rate);
- return ~0;
- }
-
- dd->last_rounded_m = min_delta_m;
- dd->last_rounded_n = min_delta_n;
- dd->last_rounded_rate = target_rate - prev_min_delta;
-
- return dd->last_rounded_rate;
-}
-
+++ /dev/null
-/*
- * OMAP2/3 interface clock control
- *
- * Copyright (C) 2011 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-
-#include "clock.h"
-
-/* Register offsets */
-#define CM_AUTOIDLE 0x30
-#define CM_ICLKEN 0x10
-
-/* Private functions */
-
-/* XXX */
-void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk)
-{
- u32 v;
- void __iomem *r;
-
- r = (__force void __iomem *)
- ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
-
- v = omap2_clk_readl(clk, r);
- v |= (1 << clk->enable_bit);
- omap2_clk_writel(v, clk, r);
-}
-
-/* XXX */
-void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk)
-{
- u32 v;
- void __iomem *r;
-
- r = (__force void __iomem *)
- ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
-
- v = omap2_clk_readl(clk, r);
- v &= ~(1 << clk->enable_bit);
- omap2_clk_writel(v, clk, r);
-}
-
-/* Public data */
-
-const struct clk_hw_omap_ops clkhwops_iclk = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
-};
-
-const struct clk_hw_omap_ops clkhwops_iclk_wait = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
- .find_idlest = omap2_clk_dflt_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-
-
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/delay.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/bitops.h>
-#include <linux/regmap.h>
#include <linux/of_address.h>
-#include <linux/bootmem.h>
#include <asm/cpu.h>
#include <trace/events/power.h>
#include "cm-regbits-34xx.h"
#include "common.h"
-/*
- * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait
- * for a module to indicate that it is no longer in idle
- */
-#define MAX_MODULE_ENABLE_WAIT 100000
-
u16 cpu_mask;
-/*
- * Clock features setup. Used instead of CPU type checks.
- */
-struct ti_clk_features ti_clk_features;
-
/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
#define OMAP3430_DPLL_FINT_BAND1_MIN 750000
#define OMAP3430_DPLL_FINT_BAND1_MAX 2100000
#define OMAP3PLUS_DPLL_FINT_MIN 32000
#define OMAP3PLUS_DPLL_FINT_MAX 52000000
-/*
- * clkdm_control: if true, then when a clock is enabled in the
- * hardware, its clockdomain will first be enabled; and when a clock
- * is disabled in the hardware, its clockdomain will be disabled
- * afterwards.
- */
-static bool clkdm_control = true;
-
-static LIST_HEAD(clk_hw_omap_clocks);
-
-struct clk_iomap {
- struct regmap *regmap;
- void __iomem *mem;
-};
-
-static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
-
-static void clk_memmap_writel(u32 val, void __iomem *reg)
-{
- struct clk_omap_reg *r = (struct clk_omap_reg *)®
- struct clk_iomap *io = clk_memmaps[r->index];
-
- if (io->regmap)
- regmap_write(io->regmap, r->offset, val);
- else
- writel_relaxed(val, io->mem + r->offset);
-}
-
-static u32 clk_memmap_readl(void __iomem *reg)
-{
- u32 val;
- struct clk_omap_reg *r = (struct clk_omap_reg *)®
- struct clk_iomap *io = clk_memmaps[r->index];
-
- if (io->regmap)
- regmap_read(io->regmap, r->offset, &val);
- else
- val = readl_relaxed(io->mem + r->offset);
-
- return val;
-}
-
-void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg)
-{
- if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING)))
- writel_relaxed(val, reg);
- else
- clk_memmap_writel(val, reg);
-}
-
-u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg)
-{
- if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING)))
- return readl_relaxed(reg);
- else
- return clk_memmap_readl(reg);
-}
-
static struct ti_clk_ll_ops omap_clk_ll_ops = {
- .clk_readl = clk_memmap_readl,
- .clk_writel = clk_memmap_writel,
+ .clkdm_clk_enable = clkdm_clk_enable,
+ .clkdm_clk_disable = clkdm_clk_disable,
+ .cm_wait_module_ready = omap_cm_wait_module_ready,
+ .cm_split_idlest_reg = cm_split_idlest_reg,
};
/**
- * omap2_clk_provider_init - initialize a clock provider
- * @match_table: DT device table to match for devices to init
- * @np: device node pointer for the this clock provider
- * @index: index for the clock provider
- + @syscon: syscon regmap pointer
- * @mem: iomem pointer for the clock provider memory area, only used if
- * syscon is not provided
+ * omap2_clk_setup_ll_ops - setup clock driver low-level ops
*
- * Initializes a clock provider module (CM/PRM etc.), registering
- * the memory mapping at specified index and initializing the
- * low level driver infrastructure. Returns 0 in success.
+ * Sets up clock driver low-level platform ops. These are needed
+ * for register accesses and various other misc platform operations.
+ * Returns 0 on success, -EBUSY if low level ops have been registered
+ * already.
*/
-int __init omap2_clk_provider_init(struct device_node *np, int index,
- struct regmap *syscon, void __iomem *mem)
+int __init omap2_clk_setup_ll_ops(void)
{
- struct clk_iomap *io;
-
- ti_clk_ll_ops = &omap_clk_ll_ops;
-
- io = kzalloc(sizeof(*io), GFP_KERNEL);
-
- io->regmap = syscon;
- io->mem = mem;
-
- clk_memmaps[index] = io;
-
- ti_dt_clk_init_provider(np, index);
-
- return 0;
-}
-
-/**
- * omap2_clk_legacy_provider_init - initialize a legacy clock provider
- * @index: index for the clock provider
- * @mem: iomem pointer for the clock provider memory area
- *
- * Initializes a legacy clock provider memory mapping.
- */
-void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
-{
- struct clk_iomap *io;
-
- ti_clk_ll_ops = &omap_clk_ll_ops;
-
- io = memblock_virt_alloc(sizeof(*io), 0);
-
- io->mem = mem;
-
- clk_memmaps[index] = io;
+ return ti_clk_setup_ll_ops(&omap_clk_ll_ops);
}
/*
/* Private functions */
-
-/**
- * _wait_idlest_generic - wait for a module to leave the idle state
- * @clk: module clock to wait for (needed for register offsets)
- * @reg: virtual address of module IDLEST register
- * @mask: value to mask against to determine if the module is active
- * @idlest: idle state indicator (0 or 1) for the clock
- * @name: name of the clock (for printk)
- *
- * Wait for a module to leave idle, where its idle-status register is
- * not inside the CM module. Returns 1 if the module left idle
- * promptly, or 0 if the module did not leave idle before the timeout
- * elapsed. XXX Deprecated - should be moved into drivers for the
- * individual IP block that the IDLEST register exists in.
- */
-static int _wait_idlest_generic(struct clk_hw_omap *clk, void __iomem *reg,
- u32 mask, u8 idlest, const char *name)
-{
- int i = 0, ena = 0;
-
- ena = (idlest) ? 0 : mask;
-
- omap_test_timeout(((omap2_clk_readl(clk, reg) & mask) == ena),
- MAX_MODULE_ENABLE_WAIT, i);
-
- if (i < MAX_MODULE_ENABLE_WAIT)
- pr_debug("omap clock: module associated with clock %s ready after %d loops\n",
- name, i);
- else
- pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n",
- name, MAX_MODULE_ENABLE_WAIT);
-
- return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
-};
-
-/**
- * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE
- * @clk: struct clk * belonging to the module
- *
- * If the necessary clocks for the OMAP hardware IP block that
- * corresponds to clock @clk are enabled, then wait for the module to
- * indicate readiness (i.e., to leave IDLE). This code does not
- * belong in the clock code and will be moved in the medium term to
- * module-dependent code. No return value.
- */
-static void _omap2_module_wait_ready(struct clk_hw_omap *clk)
-{
- void __iomem *companion_reg, *idlest_reg;
- u8 other_bit, idlest_bit, idlest_val, idlest_reg_id;
- s16 prcm_mod;
- int r;
-
- /* Not all modules have multiple clocks that their IDLEST depends on */
- if (clk->ops->find_companion) {
- clk->ops->find_companion(clk, &companion_reg, &other_bit);
- if (!(omap2_clk_readl(clk, companion_reg) & (1 << other_bit)))
- return;
- }
-
- clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
- r = cm_split_idlest_reg(idlest_reg, &prcm_mod, &idlest_reg_id);
- if (r) {
- /* IDLEST register not in the CM module */
- _wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit),
- idlest_val, __clk_get_name(clk->hw.clk));
- } else {
- omap_cm_wait_module_ready(0, prcm_mod, idlest_reg_id,
- idlest_bit);
- };
-}
-
/* Public functions */
/**
}
}
-/**
- * omap2_clk_disable_clkdm_control - disable clkdm control on clk enable/disable
- *
- * Prevent the OMAP clock code from calling into the clockdomain code
- * when a hardware clock in that clockdomain is enabled or disabled.
- * Intended to be called at init time from omap*_clk_init(). No
- * return value.
- */
-void __init omap2_clk_disable_clkdm_control(void)
-{
- clkdm_control = false;
-}
-
-/**
- * omap2_clk_dflt_find_companion - find companion clock to @clk
- * @clk: struct clk * to find the companion clock of
- * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
- * @other_bit: u8 ** to return the companion clock bit shift in
- *
- * Note: We don't need special code here for INVERT_ENABLE for the
- * time being since INVERT_ENABLE only applies to clocks enabled by
- * CM_CLKEN_PLL
- *
- * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's
- * just a matter of XORing the bits.
- *
- * Some clocks don't have companion clocks. For example, modules with
- * only an interface clock (such as MAILBOXES) don't have a companion
- * clock. Right now, this code relies on the hardware exporting a bit
- * in the correct companion register that indicates that the
- * nonexistent 'companion clock' is active. Future patches will
- * associate this type of code with per-module data structures to
- * avoid this issue, and remove the casts. No return value.
- */
-void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
- void __iomem **other_reg, u8 *other_bit)
-{
- u32 r;
-
- /*
- * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes
- * it's just a matter of XORing the bits.
- */
- r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN));
-
- *other_reg = (__force void __iomem *)r;
- *other_bit = clk->enable_bit;
-}
-
-/**
- * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
- * @clk: struct clk * to find IDLEST info for
- * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
- * @idlest_bit: u8 * to return the CM_IDLEST bit shift in
- * @idlest_val: u8 * to return the idle status indicator
- *
- * Return the CM_IDLEST register address and bit shift corresponding
- * to the module that "owns" this clock. This default code assumes
- * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that
- * the IDLEST register address ID corresponds to the CM_*CLKEN
- * register address ID (e.g., that CM_FCLKEN2 corresponds to
- * CM_IDLEST2). This is not true for all modules. No return value.
- */
-void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg, u8 *idlest_bit, u8 *idlest_val)
-{
- u32 r;
-
- r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
- *idlest_reg = (__force void __iomem *)r;
- *idlest_bit = clk->enable_bit;
-
- /*
- * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
- * 34xx reverses this, just to keep us on our toes
- * AM35xx uses both, depending on the module.
- */
- *idlest_val = ti_clk_features.cm_idlest_val;
-}
-
-/**
- * omap2_dflt_clk_enable - enable a clock in the hardware
- * @hw: struct clk_hw * of the clock to enable
- *
- * Enable the clock @hw in the hardware. We first call into the OMAP
- * clockdomain code to "enable" the corresponding clockdomain if this
- * is the first enabled user of the clockdomain. Then program the
- * hardware to enable the clock. Then wait for the IP block that uses
- * this clock to leave idle (if applicable). Returns the error value
- * from clkdm_clk_enable() if it terminated with an error, or -EINVAL
- * if @hw has a null clock enable_reg, or zero upon success.
- */
-int omap2_dflt_clk_enable(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk;
- u32 v;
- int ret = 0;
-
- clk = to_clk_hw_omap(hw);
-
- if (clkdm_control && clk->clkdm) {
- ret = clkdm_clk_enable(clk->clkdm, hw->clk);
- if (ret) {
- WARN(1, "%s: could not enable %s's clockdomain %s: %d\n",
- __func__, __clk_get_name(hw->clk),
- clk->clkdm->name, ret);
- return ret;
- }
- }
-
- if (unlikely(clk->enable_reg == NULL)) {
- pr_err("%s: %s missing enable_reg\n", __func__,
- __clk_get_name(hw->clk));
- ret = -EINVAL;
- goto err;
- }
-
- /* FIXME should not have INVERT_ENABLE bit here */
- v = omap2_clk_readl(clk, clk->enable_reg);
- if (clk->flags & INVERT_ENABLE)
- v &= ~(1 << clk->enable_bit);
- else
- v |= (1 << clk->enable_bit);
- omap2_clk_writel(v, clk, clk->enable_reg);
- v = omap2_clk_readl(clk, clk->enable_reg); /* OCP barrier */
-
- if (clk->ops && clk->ops->find_idlest)
- _omap2_module_wait_ready(clk);
-
- return 0;
-
-err:
- if (clkdm_control && clk->clkdm)
- clkdm_clk_disable(clk->clkdm, hw->clk);
- return ret;
-}
-
-/**
- * omap2_dflt_clk_disable - disable a clock in the hardware
- * @hw: struct clk_hw * of the clock to disable
- *
- * Disable the clock @hw in the hardware, and call into the OMAP
- * clockdomain code to "disable" the corresponding clockdomain if all
- * clocks/hwmods in that clockdomain are now disabled. No return
- * value.
- */
-void omap2_dflt_clk_disable(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk;
- u32 v;
-
- clk = to_clk_hw_omap(hw);
- if (!clk->enable_reg) {
- /*
- * 'independent' here refers to a clock which is not
- * controlled by its parent.
- */
- pr_err("%s: independent clock %s has no enable_reg\n",
- __func__, __clk_get_name(hw->clk));
- return;
- }
-
- v = omap2_clk_readl(clk, clk->enable_reg);
- if (clk->flags & INVERT_ENABLE)
- v |= (1 << clk->enable_bit);
- else
- v &= ~(1 << clk->enable_bit);
- omap2_clk_writel(v, clk, clk->enable_reg);
- /* No OCP barrier needed here since it is a disable operation */
-
- if (clkdm_control && clk->clkdm)
- clkdm_clk_disable(clk->clkdm, hw->clk);
-}
-
-/**
- * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw
- * @hw: struct clk_hw * of the clock being enabled
- *
- * Increment the usecount of the clockdomain of the clock pointed to
- * by @hw; if the usecount is 1, the clockdomain will be "enabled."
- * Only needed for clocks that don't use omap2_dflt_clk_enable() as
- * their enable function pointer. Passes along the return value of
- * clkdm_clk_enable(), -EINVAL if @hw is not associated with a
- * clockdomain, or 0 if clock framework-based clockdomain control is
- * not implemented.
- */
-int omap2_clkops_enable_clkdm(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk;
- int ret = 0;
-
- clk = to_clk_hw_omap(hw);
-
- if (unlikely(!clk->clkdm)) {
- pr_err("%s: %s: no clkdm set ?!\n", __func__,
- __clk_get_name(hw->clk));
- return -EINVAL;
- }
-
- if (unlikely(clk->enable_reg))
- pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
- __clk_get_name(hw->clk));
-
- if (!clkdm_control) {
- pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
- __func__, __clk_get_name(hw->clk));
- return 0;
- }
-
- ret = clkdm_clk_enable(clk->clkdm, hw->clk);
- WARN(ret, "%s: could not enable %s's clockdomain %s: %d\n",
- __func__, __clk_get_name(hw->clk), clk->clkdm->name, ret);
-
- return ret;
-}
-
-/**
- * omap2_clkops_disable_clkdm - decrement usecount on clkdm of @hw
- * @hw: struct clk_hw * of the clock being disabled
- *
- * Decrement the usecount of the clockdomain of the clock pointed to
- * by @hw; if the usecount is 0, the clockdomain will be "disabled."
- * Only needed for clocks that don't use omap2_dflt_clk_disable() as their
- * disable function pointer. No return value.
- */
-void omap2_clkops_disable_clkdm(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk;
-
- clk = to_clk_hw_omap(hw);
-
- if (unlikely(!clk->clkdm)) {
- pr_err("%s: %s: no clkdm set ?!\n", __func__,
- __clk_get_name(hw->clk));
- return;
- }
-
- if (unlikely(clk->enable_reg))
- pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
- __clk_get_name(hw->clk));
-
- if (!clkdm_control) {
- pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
- __func__, __clk_get_name(hw->clk));
- return;
- }
-
- clkdm_clk_disable(clk->clkdm, hw->clk);
-}
-
-/**
- * omap2_dflt_clk_is_enabled - is clock enabled in the hardware?
- * @hw: struct clk_hw * to check
- *
- * Return 1 if the clock represented by @hw is enabled in the
- * hardware, or 0 otherwise. Intended for use in the struct
- * clk_ops.is_enabled function pointer.
- */
-int omap2_dflt_clk_is_enabled(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 v;
-
- v = omap2_clk_readl(clk, clk->enable_reg);
-
- if (clk->flags & INVERT_ENABLE)
- v ^= BIT(clk->enable_bit);
-
- v &= BIT(clk->enable_bit);
-
- return v ? 1 : 0;
-}
-
static int __initdata mpurate;
/*
}
__setup("mpurate=", omap_clk_setup);
-/**
- * omap2_init_clk_hw_omap_clocks - initialize an OMAP clock
- * @clk: struct clk * to initialize
- *
- * Add an OMAP clock @clk to the internal list of OMAP clocks. Used
- * temporarily for autoidle handling, until this support can be
- * integrated into the common clock framework code in some way. No
- * return value.
- */
-void omap2_init_clk_hw_omap_clocks(struct clk *clk)
-{
- struct clk_hw_omap *c;
-
- if (__clk_get_flags(clk) & CLK_IS_BASIC)
- return;
-
- c = to_clk_hw_omap(__clk_get_hw(clk));
- list_add(&c->node, &clk_hw_omap_clocks);
-}
-
-/**
- * omap2_clk_enable_autoidle_all - enable autoidle on all OMAP clocks that
- * support it
- *
- * Enable clock autoidle on all OMAP clocks that have allow_idle
- * function pointers associated with them. This function is intended
- * to be temporary until support for this is added to the common clock
- * code. Returns 0.
- */
-int omap2_clk_enable_autoidle_all(void)
-{
- struct clk_hw_omap *c;
-
- list_for_each_entry(c, &clk_hw_omap_clocks, node)
- if (c->ops && c->ops->allow_idle)
- c->ops->allow_idle(c);
-
- of_ti_clk_allow_autoidle_all();
-
- return 0;
-}
-
-/**
- * omap2_clk_disable_autoidle_all - disable autoidle on all OMAP clocks that
- * support it
- *
- * Disable clock autoidle on all OMAP clocks that have allow_idle
- * function pointers associated with them. This function is intended
- * to be temporary until support for this is added to the common clock
- * code. Returns 0.
- */
-int omap2_clk_disable_autoidle_all(void)
-{
- struct clk_hw_omap *c;
-
- list_for_each_entry(c, &clk_hw_omap_clocks, node)
- if (c->ops && c->ops->deny_idle)
- c->ops->deny_idle(c);
-
- of_ti_clk_deny_autoidle_all();
-
- return 0;
-}
-
-/**
- * omap2_clk_deny_idle - disable autoidle on an OMAP clock
- * @clk: struct clk * to disable autoidle for
- *
- * Disable autoidle on an OMAP clock.
- */
-int omap2_clk_deny_idle(struct clk *clk)
-{
- struct clk_hw_omap *c;
-
- if (__clk_get_flags(clk) & CLK_IS_BASIC)
- return -EINVAL;
-
- c = to_clk_hw_omap(__clk_get_hw(clk));
- if (c->ops && c->ops->deny_idle)
- c->ops->deny_idle(c);
- return 0;
-}
-
-/**
- * omap2_clk_allow_idle - enable autoidle on an OMAP clock
- * @clk: struct clk * to enable autoidle for
- *
- * Enable autoidle on an OMAP clock.
- */
-int omap2_clk_allow_idle(struct clk *clk)
-{
- struct clk_hw_omap *c;
-
- if (__clk_get_flags(clk) & CLK_IS_BASIC)
- return -EINVAL;
-
- c = to_clk_hw_omap(__clk_get_hw(clk));
- if (c->ops && c->ops->allow_idle)
- c->ops->allow_idle(c);
- return 0;
-}
-
-/**
- * omap2_clk_enable_init_clocks - prepare & enable a list of clocks
- * @clk_names: ptr to an array of strings of clock names to enable
- * @num_clocks: number of clock names in @clk_names
- *
- * Prepare and enable a list of clocks, named by @clk_names. No
- * return value. XXX Deprecated; only needed until these clocks are
- * properly claimed and enabled by the drivers or core code that uses
- * them. XXX What code disables & calls clk_put on these clocks?
- */
-void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks)
-{
- struct clk *init_clk;
- int i;
-
- for (i = 0; i < num_clocks; i++) {
- init_clk = clk_get(NULL, clk_names[i]);
- if (WARN(IS_ERR(init_clk), "could not find init clock %s\n",
- clk_names[i]))
- continue;
- clk_prepare_enable(init_clk);
- }
-}
-
-const struct clk_hw_omap_ops clkhwops_wait = {
- .find_idlest = omap2_clk_dflt_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-/**
- * omap2_clk_switch_mpurate_at_boot - switch ARM MPU rate by boot-time argument
- * @mpurate_ck_name: clk name of the clock to change rate
- *
- * Change the ARM MPU clock rate to the rate specified on the command
- * line, if one was specified. @mpurate_ck_name should be
- * "virt_prcm_set" on OMAP2xxx and "dpll1_ck" on OMAP34xx/OMAP36xx.
- * XXX Does not handle voltage scaling - on OMAP2xxx this is currently
- * handled by the virt_prcm_set clock, but this should be handled by
- * the OPP layer. XXX This is intended to be handled by the OPP layer
- * code in the near future and should be removed from the clock code.
- * Returns -EINVAL if 'mpurate' is zero or if clk_set_rate() rejects
- * the rate, -ENOENT if the struct clk referred to by @mpurate_ck_name
- * cannot be found, or 0 upon success.
- */
-int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name)
-{
- struct clk *mpurate_ck;
- int r;
-
- if (!mpurate)
- return -EINVAL;
-
- mpurate_ck = clk_get(NULL, mpurate_ck_name);
- if (WARN(IS_ERR(mpurate_ck), "Failed to get %s.\n", mpurate_ck_name))
- return -ENOENT;
-
- r = clk_set_rate(mpurate_ck, mpurate);
- if (r < 0) {
- WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n",
- mpurate_ck_name, mpurate, r);
- clk_put(mpurate_ck);
- return -EINVAL;
- }
-
- calibrate_delay();
- clk_put(mpurate_ck);
-
- return 0;
-}
-
/**
* omap2_clk_print_new_rates - print summary of current clock tree rates
* @hfclkin_ck_name: clk name for the off-chip HF oscillator
*/
void __init ti_clk_init_features(void)
{
+ struct ti_clk_features features = { 0 };
/* Fint setup for DPLLs */
if (cpu_is_omap3430()) {
- ti_clk_features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
- ti_clk_features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
- ti_clk_features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
- ti_clk_features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
+ features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
+ features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
+ features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
+ features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
} else {
- ti_clk_features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
- ti_clk_features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
+ features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
+ features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
}
/* Bypass value setup for DPLLs */
if (cpu_is_omap24xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP2XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP2XXX_EN_DPLL_FRBYPASS);
} else if (cpu_is_omap34xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP3XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP3XXX_EN_DPLL_FRBYPASS);
} else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx() ||
soc_is_omap54xx() || soc_is_dra7xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP4XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP4XXX_EN_DPLL_FRBYPASS) |
(1 << OMAP4XXX_EN_DPLL_MNBYPASS);
/* Jitter correction only available on OMAP343X */
if (cpu_is_omap343x())
- ti_clk_features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
+ features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
/* Idlest value for interface clocks.
* 24xx uses 0 to indicate not ready, and 1 to indicate ready.
* AM35xx uses both, depending on the module.
*/
if (cpu_is_omap24xx())
- ti_clk_features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
+ features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
else if (cpu_is_omap34xx())
- ti_clk_features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
+ features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
/* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */
if (omap_rev() == OMAP3430_REV_ES1_0)
- ti_clk_features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
+ features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
+
+ ti_clk_setup_features(&features);
}
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
-struct omap_clk {
- u16 cpu;
- struct clk_lookup lk;
-};
-
-#define CLK(dev, con, ck) \
- { \
- .lk = { \
- .dev_id = dev, \
- .con_id = con, \
- .clk = ck, \
- }, \
- }
-
-struct clockdomain;
-
-#define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name) \
- static struct clk_core _name##_core = { \
- .name = #_name, \
- .hw = &_name##_hw.hw, \
- .parent_names = _parent_array_name, \
- .num_parents = ARRAY_SIZE(_parent_array_name), \
- .ops = &_clkops_name, \
- }; \
- static struct clk _name = { \
- .core = &_name##_core, \
- };
-
-#define DEFINE_STRUCT_CLK_FLAGS(_name, _parent_array_name, \
- _clkops_name, _flags) \
- static struct clk_core _name##_core = { \
- .name = #_name, \
- .hw = &_name##_hw.hw, \
- .parent_names = _parent_array_name, \
- .num_parents = ARRAY_SIZE(_parent_array_name), \
- .ops = &_clkops_name, \
- .flags = _flags, \
- }; \
- static struct clk _name = { \
- .core = &_name##_core, \
- };
-
-#define DEFINE_STRUCT_CLK_HW_OMAP(_name, _clkdm_name) \
- static struct clk_hw_omap _name##_hw = { \
- .hw = { \
- .clk = &_name, \
- }, \
- .clkdm_name = _clkdm_name, \
- };
-
-#define DEFINE_CLK_OMAP_MUX(_name, _clkdm_name, _clksel, \
- _clksel_reg, _clksel_mask, \
- _parent_names, _ops) \
- static struct clk _name; \
- static struct clk_hw_omap _name##_hw = { \
- .hw = { \
- .clk = &_name, \
- }, \
- .clksel = _clksel, \
- .clksel_reg = _clksel_reg, \
- .clksel_mask = _clksel_mask, \
- .clkdm_name = _clkdm_name, \
- }; \
- DEFINE_STRUCT_CLK(_name, _parent_names, _ops);
-
-#define DEFINE_CLK_OMAP_MUX_GATE(_name, _clkdm_name, _clksel, \
- _clksel_reg, _clksel_mask, \
- _enable_reg, _enable_bit, \
- _hwops, _parent_names, _ops) \
- static struct clk _name; \
- static struct clk_hw_omap _name##_hw = { \
- .hw = { \
- .clk = &_name, \
- }, \
- .ops = _hwops, \
- .enable_reg = _enable_reg, \
- .enable_bit = _enable_bit, \
- .clksel = _clksel, \
- .clksel_reg = _clksel_reg, \
- .clksel_mask = _clksel_mask, \
- .clkdm_name = _clkdm_name, \
- }; \
- DEFINE_STRUCT_CLK(_name, _parent_names, _ops);
-
/* struct clksel_rate.flags possibilities */
#define RATE_IN_242X (1 << 0)
#define RATE_IN_243X (1 << 1)
/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX)
-
-/**
- * struct clksel_rate - register bitfield values corresponding to clk divisors
- * @val: register bitfield value (shifted to bit 0)
- * @div: clock divisor corresponding to @val
- * @flags: (see "struct clksel_rate.flags possibilities" above)
- *
- * @val should match the value of a read from struct clk.clksel_reg
- * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
- *
- * @div is the divisor that should be applied to the parent clock's rate
- * to produce the current clock's rate.
- */
-struct clksel_rate {
- u32 val;
- u8 div;
- u16 flags;
-};
-
-/**
- * struct clksel - available parent clocks, and a pointer to their divisors
- * @parent: struct clk * to a possible parent clock
- * @rates: available divisors for this parent clock
- *
- * A struct clksel is always associated with one or more struct clks
- * and one or more struct clksel_rates.
- */
-struct clksel {
- struct clk *parent;
- const struct clksel_rate *rates;
-};
-
/* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
#define CORE_CLK_SRC_32K 0x0
#define CORE_CLK_SRC_DPLL 0x1
#define OMAP4XXX_EN_DPLL_FRBYPASS 0x6
#define OMAP4XXX_EN_DPLL_LOCKED 0x7
-u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk);
-void omap3_dpll_allow_idle(struct clk_hw_omap *clk);
-void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
-void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk);
-void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk);
-
-void __init omap2_clk_disable_clkdm_control(void);
-
-/* clkt_clksel.c public functions */
-u32 omap2_clksel_round_rate_div(struct clk_hw_omap *clk,
- unsigned long target_rate,
- u32 *new_div);
-u8 omap2_clksel_find_parent_index(struct clk_hw *hw);
-unsigned long omap2_clksel_recalc(struct clk_hw *hw, unsigned long parent_rate);
-long omap2_clksel_round_rate(struct clk_hw *hw, unsigned long target_rate,
- unsigned long *parent_rate);
-int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate);
-int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val);
-
-/* clkt_iclk.c public functions */
-extern void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
-extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
-
-unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
-
-void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
- void __iomem **other_reg,
- u8 *other_bit);
-void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit, u8 *idlest_val);
-int omap2_clk_enable_autoidle_all(void);
-int omap2_clk_allow_idle(struct clk *clk);
-int omap2_clk_deny_idle(struct clk *clk);
-int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
const char *core_ck_name,
const char *mpu_ck_name);
-u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg);
-void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg);
-
extern u16 cpu_mask;
-/*
- * Clock features setup. Used instead of CPU type checks.
- */
-struct ti_clk_features {
- u32 flags;
- long fint_min;
- long fint_max;
- long fint_band1_max;
- long fint_band2_min;
- u8 dpll_bypass_vals;
- u8 cm_idlest_val;
-};
-
-#define TI_CLK_DPLL_HAS_FREQSEL (1 << 0)
-#define TI_CLK_DPLL4_DENY_REPROGRAM (1 << 1)
-
-extern struct ti_clk_features ti_clk_features;
-
extern const struct clkops clkops_omap2_dflt_wait;
extern const struct clkops clkops_omap2_dflt;
extern struct clk_functions omap2_clk_functions;
-extern const struct clksel_rate gpt_32k_rates[];
-extern const struct clksel_rate gpt_sys_rates[];
-extern const struct clksel_rate gfx_l3_rates[];
-extern const struct clksel_rate dsp_ick_rates[];
-
-extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
-extern const struct clk_hw_omap_ops clkhwops_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait;
-extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
-extern const struct clk_hw_omap_ops clkhwops_apll54;
-extern const struct clk_hw_omap_ops clkhwops_apll96;
-
-/* clksel_rate blocks shared between OMAP44xx and AM33xx */
-extern const struct clksel_rate div_1_0_rates[];
-extern const struct clksel_rate div3_1to4_rates[];
-extern const struct clksel_rate div_1_1_rates[];
-extern const struct clksel_rate div_1_2_rates[];
-extern const struct clksel_rate div_1_3_rates[];
-extern const struct clksel_rate div_1_4_rates[];
-extern const struct clksel_rate div31_1to31_rates[];
-
-extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
-extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
-
-struct regmap;
-
-int __init omap2_clk_provider_init(struct device_node *np, int index,
- struct regmap *syscon, void __iomem *mem);
-void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem);
+int __init omap2_clk_setup_ll_ops(void);
void __init ti_clk_init_features(void);
#endif
+++ /dev/null
-/*
- * clock2430.c - OMAP2430-specific clock integration code
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "iomap.h"
-#include "clock.h"
-#include "clock2xxx.h"
-#include "cm2xxx.h"
-#include "cm-regbits-24xx.h"
-
-/**
- * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
- * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function
- * passes back the correct CM_IDLEST register address for I2CHS
- * modules. No return value.
- */
-static void omap2430_clk_i2chs_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- *idlest_reg = OMAP2430_CM_REGADDR(CORE_MOD, CM_IDLEST);
- *idlest_bit = clk->enable_bit;
- *idlest_val = OMAP24XX_CM_IDLEST_VAL;
-}
-
-/* 2430 I2CHS has non-standard IDLEST register */
-const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait = {
- .find_idlest = omap2430_clk_i2chs_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
+++ /dev/null
-/*
- * clock2xxx.c - OMAP2xxx-specific clock integration code
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "clock.h"
-#include "clock2xxx.h"
-#include "cm.h"
-#include "cm-regbits-24xx.h"
-
-struct clk_hw *dclk_hw;
-/*
- * Omap24xx specific clock functions
- */
-
-/*
- * Switch the MPU rate if specified on cmdline. We cannot do this
- * early until cmdline is parsed. XXX This should be removed from the
- * clock code and handled by the OPP layer code in the near future.
- */
-static int __init omap2xxx_clk_arch_init(void)
-{
- int ret;
-
- if (!cpu_is_omap24xx())
- return 0;
-
- ret = omap2_clk_switch_mpurate_at_boot("virt_prcm_set");
- if (!ret)
- omap2_clk_print_new_rates("sys_ck", "dpll_ck", "mpu_ck");
-
- return ret;
-}
-
-omap_arch_initcall(omap2xxx_clk_arch_init);
-
-
+++ /dev/null
-/*
- * OMAP3-specific clock framework functions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2011 Nokia Corporation
- *
- * Paul Walmsley
- * Jouni Högander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
- * Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock34xx.h"
-#include "cm3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/**
- * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
- * from the CM_{I,F}CLKEN bit. Pass back the correct info via
- * @idlest_reg and @idlest_bit. No return value.
- */
-static void omap3430es2_clk_ssi_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- u32 r;
-
- r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
- *idlest_reg = (__force void __iomem *)r;
- *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
- *idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait = {
- .find_idlest = omap3430es2_clk_ssi_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
- .find_idlest = omap3430es2_clk_ssi_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-/**
- * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * Some OMAP modules on OMAP3 ES2+ chips have both initiator and
- * target IDLEST bits. For our purposes, we are concerned with the
- * target IDLEST bits, which exist at a different bit position than
- * the *CLKEN bit position for these modules (DSS and USBHOST) (The
- * default find_idlest code assumes that they are at the same
- * position.) No return value.
- */
-static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- u32 r;
-
- r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
- *idlest_reg = (__force void __iomem *)r;
- /* USBHOST_IDLE has same shift */
- *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
- *idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait = {
- .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
- .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-/**
- * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
- * shift from the CM_{I,F}CLKEN bit. Pass back the correct info via
- * @idlest_reg and @idlest_bit. No return value.
- */
-static void omap3430es2_clk_hsotgusb_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- u32 r;
-
- r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
- *idlest_reg = (__force void __iomem *)r;
- *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
- *idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
- .find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait = {
- .find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
+++ /dev/null
-/*
- * OMAP34xx clock function prototypes and macros
- *
- * Copyright (C) 2007-2010 Texas Instruments, Inc.
- * Copyright (C) 2007-2011 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
-
-extern const struct clkops clkops_omap3430es2_ssi_wait;
-extern const struct clkops clkops_omap3430es2_iclk_ssi_wait;
-extern const struct clkops clkops_omap3430es2_hsotgusb_wait;
-extern const struct clkops clkops_omap3430es2_iclk_hsotgusb_wait;
-extern const struct clkops clkops_omap3430es2_dss_usbhost_wait;
-extern const struct clkops clkops_omap3430es2_iclk_dss_usbhost_wait;
-
-#endif
+++ /dev/null
-/*
- * OMAP3517/3505-specific clock framework functions
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2011 Nokia Corporation
- *
- * Ranjith Lohithakshan
- * Paul Walmsley
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
- * Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock3517.h"
-#include "cm3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/*
- * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
- * in the same register at a bit offset of 0x8. The EN_ACK for ICK is
- * at an offset of 4 from ICK enable bit.
- */
-#define AM35XX_IPSS_ICK_MASK 0xF
-#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4
-#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8
-#define AM35XX_IPSS_CLK_IDLEST_VAL 0
-
-/**
- * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The interface clocks on AM35xx IPSS reflects the clock idle status
- * in the enable register itsel at a bit offset of 4 from the enable
- * bit. A value of 1 indicates that clock is enabled.
- */
-static void am35xx_clk_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- *idlest_reg = (__force void __iomem *)(clk->enable_reg);
- *idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
- *idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
-}
-
-/**
- * am35xx_clk_find_companion - find companion clock to @clk
- * @clk: struct clk * to find the companion clock of
- * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
- * @other_bit: u8 ** to return the companion clock bit shift in
- *
- * Some clocks don't have companion clocks. For example, modules with
- * only an interface clock (such as HECC) don't have a companion
- * clock. Right now, this code relies on the hardware exporting a bit
- * in the correct companion register that indicates that the
- * nonexistent 'companion clock' is active. Future patches will
- * associate this type of code with per-module data structures to
- * avoid this issue, and remove the casts. No return value.
- */
-static void am35xx_clk_find_companion(struct clk_hw_omap *clk,
- void __iomem **other_reg,
- u8 *other_bit)
-{
- *other_reg = (__force void __iomem *)(clk->enable_reg);
- if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
- *other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
- else
- *other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
-}
-const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait = {
- .find_idlest = am35xx_clk_find_idlest,
- .find_companion = am35xx_clk_find_companion,
-};
-
-/**
- * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The IPSS target CM_IDLEST bit is at a different shift from the
- * CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg
- * and @idlest_bit. No return value.
- */
-static void am35xx_clk_ipss_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- u32 r;
-
- r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
- *idlest_reg = (__force void __iomem *)r;
- *idlest_bit = AM35XX_ST_IPSS_SHIFT;
- *idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
- .find_idlest = am35xx_clk_ipss_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
+++ /dev/null
-/*
- * OMAP3517/3505 clock function prototypes and macros
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
-
-extern const struct clkops clkops_am35xx_ipss_module_wait;
-extern const struct clkops clkops_am35xx_ipss_wait;
-
-#endif
+++ /dev/null
-/*
- * OMAP36xx-specific clkops
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- *
- * Mike Turquette
- * Vijaykumar GN
- * Paul Walmsley
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
- * Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock36xx.h"
-#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
-
-/**
- * omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering
- * from HSDivider PWRDN problem Implements Errata ID: i556.
- * @clk: DPLL output struct clk
- *
- * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
- * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
- * valueafter their respective PWRDN bits are set. Any dummy write
- * (Any other value different from the Read value) to the
- * corresponding CM_CLKSEL register will refresh the dividers.
- */
-int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
-{
- struct clk_divider *parent;
- struct clk_hw *parent_hw;
- u32 dummy_v, orig_v;
- struct clk_hw_omap *omap_clk = to_clk_hw_omap(clk);
- int ret;
-
- /* Clear PWRDN bit of HSDIVIDER */
- ret = omap2_dflt_clk_enable(clk);
-
- parent_hw = __clk_get_hw(__clk_get_parent(clk->clk));
- parent = to_clk_divider(parent_hw);
-
- /* Restore the dividers */
- if (!ret) {
- orig_v = omap2_clk_readl(omap_clk, parent->reg);
- dummy_v = orig_v;
-
- /* Write any other value different from the Read value */
- dummy_v ^= (1 << parent->shift);
- omap2_clk_writel(dummy_v, omap_clk, parent->reg);
-
- /* Write the original divider */
- omap2_clk_writel(orig_v, omap_clk, parent->reg);
- }
-
- return ret;
-}
+++ /dev/null
-/*
- * OMAP36xx clock function prototypes and macros
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
-
-extern int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *hw);
-
-#endif
+++ /dev/null
-/*
- * OMAP3-specific clock framework functions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
- *
- * Paul Walmsley
- * Jouni Högander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "clock.h"
-#include "clock3xxx.h"
-#include "prm2xxx_3xxx.h"
-#include "prm-regbits-34xx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/*
- * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
- * that are sourced by DPLL5, and both of these require this clock
- * to be at 120 MHz for proper operation.
- */
-#define DPLL5_FREQ_FOR_USBHOST 120000000
-
-/* needed by omap3_core_dpll_m2_set_rate() */
-struct clk *sdrc_ick_p, *arm_fck_p;
-
-/**
- * omap3_dpll4_set_rate - set rate for omap3 per-dpll
- * @hw: clock to change
- * @rate: target rate for clock
- * @parent_rate: rate of the parent clock
- *
- * Check if the current SoC supports the per-dpll reprogram operation
- * or not, and then do the rate change if supported. Returns -EINVAL
- * if not supported, 0 for success, and potential error codes from the
- * clock rate change.
- */
-int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- /*
- * According to the 12-5 CDP code from TI, "Limitation 2.5"
- * on 3430ES1 prevents us from changing DPLL multipliers or dividers
- * on DPLL4.
- */
- if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
- pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
- return -EINVAL;
- }
-
- return omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
-}
-
-/**
- * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll
- * @hw: clock to change
- * @rate: target rate for clock
- * @parent_rate: rate of the parent clock
- * @index: parent index, 0 - reference clock, 1 - bypass clock
- *
- * Check if the current SoC support the per-dpll reprogram operation
- * or not, and then do the rate + parent change if supported. Returns
- * -EINVAL if not supported, 0 for success, and potential error codes
- * from the clock rate change.
- */
-int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate, u8 index)
-{
- if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
- pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
- return -EINVAL;
- }
-
- return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate,
- index);
-}
-
-void __init omap3_clk_lock_dpll5(void)
-{
- struct clk *dpll5_clk;
- struct clk *dpll5_m2_clk;
-
- dpll5_clk = clk_get(NULL, "dpll5_ck");
- clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
- clk_prepare_enable(dpll5_clk);
-
- /* Program dpll5_m2_clk divider for no division */
- dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
- clk_prepare_enable(dpll5_m2_clk);
- clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
-
- clk_disable_unprepare(dpll5_m2_clk);
- clk_disable_unprepare(dpll5_clk);
- return;
-}
-
-/* Common clock code */
-
-/*
- * Switch the MPU rate if specified on cmdline. We cannot do this
- * early until cmdline is parsed. XXX This should be removed from the
- * clock code and handled by the OPP layer code in the near future.
- */
-static int __init omap3xxx_clk_arch_init(void)
-{
- int ret;
-
- if (!cpu_is_omap34xx())
- return 0;
-
- ret = omap2_clk_switch_mpurate_at_boot("dpll1_ck");
- if (!ret)
- omap2_clk_print_new_rates("osc_sys_ck", "core_ck", "arm_fck");
-
- return ret;
-}
-
-omap_arch_initcall(omap3xxx_clk_arch_init);
-
-
+++ /dev/null
-/*
- * OMAP4 clock function prototypes and macros
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
-
-/*
- * OMAP4430_REGM4XEN_MULT: If the CM_CLKMODE_DPLL_ABE.DPLL_REGM4XEN bit is
- * set, then the DPLL's lock frequency is multiplied by 4 (OMAP4430 TRM
- * vV Section 3.6.3.3.1 "DPLLs Output Clocks Parameters")
- */
-#define OMAP4430_REGM4XEN_MULT 4
-
-int omap4xxx_clk_init(void);
-
-#endif
+++ /dev/null
-/*
- * linux/arch/arm/mach-omap2/clock_common_data.c
- *
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
- * Copyright (C) 2004-2009 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file contains clock data that is common to both the OMAP2xxx and
- * OMAP3xxx clock definition files.
- */
-
-#include "clock.h"
-
-/* clksel_rate data common to 24xx/343x */
-const struct clksel_rate gpt_32k_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 0 }
-};
-
-const struct clksel_rate gpt_sys_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 0 }
-};
-
-const struct clksel_rate gfx_l3_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_3XXX },
- { .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_3XXX },
- { .div = 0 }
-};
-
-const struct clksel_rate dsp_ick_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 3, .val = 3, .flags = RATE_IN_243X },
- { .div = 0 },
-};
-
-
-/* clksel_rate blocks shared between OMAP44xx and AM33xx */
-
-const struct clksel_rate div_1_0_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div3_1to4_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_4430 },
- { .div = 2, .val = 1, .flags = RATE_IN_4430 },
- { .div = 4, .val = 2, .flags = RATE_IN_4430 },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_1_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_2_rates[] = {
- { .div = 1, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_3_rates[] = {
- { .div = 1, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_4_rates[] = {
- { .div = 1, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div31_1to31_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 2, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 3, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 4, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 5, .val = 5, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 6, .val = 6, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 7, .val = 7, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 8, .val = 8, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 9, .val = 9, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 10, .val = 10, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 11, .val = 11, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 12, .val = 12, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 13, .val = 13, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 14, .val = 14, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 15, .val = 15, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 16, .val = 16, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 17, .val = 17, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 18, .val = 18, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 19, .val = 19, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 20, .val = 20, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 21, .val = 21, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 22, .val = 22, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 23, .val = 23, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 24, .val = 24, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 25, .val = 25, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 26, .val = 26, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 27, .val = 27, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 28, .val = 28, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 29, .val = 29, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 30, .val = 30, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 31, .val = 31, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
+++ /dev/null
-/*
- * OMAP3/4 - specific DPLL control functions
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Written by Paul Walmsley
- * Testing and integration fixes by Jouni Högander
- *
- * 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth
- * Menon
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/bitops.h>
-#include <linux/clkdev.h>
-
-#include "clockdomain.h"
-#include "clock.h"
-
-/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
-#define DPLL_AUTOIDLE_DISABLE 0x0
-#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1
-
-#define MAX_DPLL_WAIT_TRIES 1000000
-
-/* Private functions */
-
-/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
-static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits)
-{
- const struct dpll_data *dd;
- u32 v;
-
- dd = clk->dpll_data;
-
- v = omap2_clk_readl(clk, dd->control_reg);
- v &= ~dd->enable_mask;
- v |= clken_bits << __ffs(dd->enable_mask);
- omap2_clk_writel(v, clk, dd->control_reg);
-}
-
-/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
-static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state)
-{
- const struct dpll_data *dd;
- int i = 0;
- int ret = -EINVAL;
- const char *clk_name;
-
- dd = clk->dpll_data;
- clk_name = __clk_get_name(clk->hw.clk);
-
- state <<= __ffs(dd->idlest_mask);
-
- while (((omap2_clk_readl(clk, dd->idlest_reg) & dd->idlest_mask)
- != state) && i < MAX_DPLL_WAIT_TRIES) {
- i++;
- udelay(1);
- }
-
- if (i == MAX_DPLL_WAIT_TRIES) {
- printk(KERN_ERR "clock: %s failed transition to '%s'\n",
- clk_name, (state) ? "locked" : "bypassed");
- } else {
- pr_debug("clock: %s transition to '%s' in %d loops\n",
- clk_name, (state) ? "locked" : "bypassed", i);
-
- ret = 0;
- }
-
- return ret;
-}
-
-/* From 3430 TRM ES2 4.7.6.2 */
-static u16 _omap3_dpll_compute_freqsel(struct clk_hw_omap *clk, u8 n)
-{
- unsigned long fint;
- u16 f = 0;
-
- fint = __clk_get_rate(clk->dpll_data->clk_ref) / n;
-
- pr_debug("clock: fint is %lu\n", fint);
-
- if (fint >= 750000 && fint <= 1000000)
- f = 0x3;
- else if (fint > 1000000 && fint <= 1250000)
- f = 0x4;
- else if (fint > 1250000 && fint <= 1500000)
- f = 0x5;
- else if (fint > 1500000 && fint <= 1750000)
- f = 0x6;
- else if (fint > 1750000 && fint <= 2100000)
- f = 0x7;
- else if (fint > 7500000 && fint <= 10000000)
- f = 0xB;
- else if (fint > 10000000 && fint <= 12500000)
- f = 0xC;
- else if (fint > 12500000 && fint <= 15000000)
- f = 0xD;
- else if (fint > 15000000 && fint <= 17500000)
- f = 0xE;
- else if (fint > 17500000 && fint <= 21000000)
- f = 0xF;
- else
- pr_debug("clock: unknown freqsel setting for %d\n", n);
-
- return f;
-}
-
-/*
- * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to lock. Waits for the DPLL to report
- * readiness before returning. Will save and restore the DPLL's
- * autoidle state across the enable, per the CDP code. If the DPLL
- * locked successfully, return 0; if the DPLL did not lock in the time
- * allotted, or DPLL3 was passed in, return -EINVAL.
- */
-static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk)
-{
- const struct dpll_data *dd;
- u8 ai;
- u8 state = 1;
- int r = 0;
-
- pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk->hw.clk));
-
- dd = clk->dpll_data;
- state <<= __ffs(dd->idlest_mask);
-
- /* Check if already locked */
- if ((omap2_clk_readl(clk, dd->idlest_reg) & dd->idlest_mask) == state)
- goto done;
-
- ai = omap3_dpll_autoidle_read(clk);
-
- if (ai)
- omap3_dpll_deny_idle(clk);
-
- _omap3_dpll_write_clken(clk, DPLL_LOCKED);
-
- r = _omap3_wait_dpll_status(clk, 1);
-
- if (ai)
- omap3_dpll_allow_idle(clk);
-
-done:
- return r;
-}
-
-/*
- * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power bypass mode. In
- * bypass mode, the DPLL's rate is set equal to its parent clock's
- * rate. Waits for the DPLL to report readiness before returning.
- * Will save and restore the DPLL's autoidle state across the enable,
- * per the CDP code. If the DPLL entered bypass mode successfully,
- * return 0; if the DPLL did not enter bypass in the time allotted, or
- * DPLL3 was passed in, or the DPLL does not support low-power bypass,
- * return -EINVAL.
- */
-static int _omap3_noncore_dpll_bypass(struct clk_hw_omap *clk)
-{
- int r;
- u8 ai;
-
- if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
- return -EINVAL;
-
- pr_debug("clock: configuring DPLL %s for low-power bypass\n",
- __clk_get_name(clk->hw.clk));
-
- ai = omap3_dpll_autoidle_read(clk);
-
- _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
-
- r = _omap3_wait_dpll_status(clk, 0);
-
- if (ai)
- omap3_dpll_allow_idle(clk);
-
- return r;
-}
-
-/*
- * _omap3_noncore_dpll_stop - instruct a DPLL to stop
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power stop. Will save and
- * restore the DPLL's autoidle state across the stop, per the CDP
- * code. If DPLL3 was passed in, or the DPLL does not support
- * low-power stop, return -EINVAL; otherwise, return 0.
- */
-static int _omap3_noncore_dpll_stop(struct clk_hw_omap *clk)
-{
- u8 ai;
-
- if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
- return -EINVAL;
-
- pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk->hw.clk));
-
- ai = omap3_dpll_autoidle_read(clk);
-
- _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
-
- if (ai)
- omap3_dpll_allow_idle(clk);
-
- return 0;
-}
-
-/**
- * _lookup_dco - Lookup DCO used by j-type DPLL
- * @clk: pointer to a DPLL struct clk
- * @dco: digital control oscillator selector
- * @m: DPLL multiplier to set
- * @n: DPLL divider to set
- *
- * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
- *
- * XXX This code is not needed for 3430/AM35xx; can it be optimized
- * out in non-multi-OMAP builds for those chips?
- */
-static void _lookup_dco(struct clk_hw_omap *clk, u8 *dco, u16 m, u8 n)
-{
- unsigned long fint, clkinp; /* watch out for overflow */
-
- clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
- fint = (clkinp / n) * m;
-
- if (fint < 1000000000)
- *dco = 2;
- else
- *dco = 4;
-}
-
-/**
- * _lookup_sddiv - Calculate sigma delta divider for j-type DPLL
- * @clk: pointer to a DPLL struct clk
- * @sd_div: target sigma-delta divider
- * @m: DPLL multiplier to set
- * @n: DPLL divider to set
- *
- * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
- *
- * XXX This code is not needed for 3430/AM35xx; can it be optimized
- * out in non-multi-OMAP builds for those chips?
- */
-static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
-{
- unsigned long clkinp, sd; /* watch out for overflow */
- int mod1, mod2;
-
- clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
-
- /*
- * target sigma-delta to near 250MHz
- * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)]
- */
- clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */
- mod1 = (clkinp * m) % (250 * n);
- sd = (clkinp * m) / (250 * n);
- mod2 = sd % 10;
- sd /= 10;
-
- if (mod1 || mod2)
- sd++;
- *sd_div = sd;
-}
-
-/*
- * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
- * @clk: struct clk * of DPLL to set
- * @freqsel: FREQSEL value to set
- *
- * Program the DPLL with the last M, N values calculated, and wait for
- * the DPLL to lock. Returns -EINVAL upon error, or 0 upon success.
- */
-static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
-{
- struct dpll_data *dd = clk->dpll_data;
- u8 dco, sd_div;
- u32 v;
-
- /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
- _omap3_noncore_dpll_bypass(clk);
-
- /*
- * Set jitter correction. Jitter correction applicable for OMAP343X
- * only since freqsel field is no longer present on other devices.
- */
- if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
- v = omap2_clk_readl(clk, dd->control_reg);
- v &= ~dd->freqsel_mask;
- v |= freqsel << __ffs(dd->freqsel_mask);
- omap2_clk_writel(v, clk, dd->control_reg);
- }
-
- /* Set DPLL multiplier, divider */
- v = omap2_clk_readl(clk, dd->mult_div1_reg);
-
- /* Handle Duty Cycle Correction */
- if (dd->dcc_mask) {
- if (dd->last_rounded_rate >= dd->dcc_rate)
- v |= dd->dcc_mask; /* Enable DCC */
- else
- v &= ~dd->dcc_mask; /* Disable DCC */
- }
-
- v &= ~(dd->mult_mask | dd->div1_mask);
- v |= dd->last_rounded_m << __ffs(dd->mult_mask);
- v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
-
- /* Configure dco and sd_div for dplls that have these fields */
- if (dd->dco_mask) {
- _lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n);
- v &= ~(dd->dco_mask);
- v |= dco << __ffs(dd->dco_mask);
- }
- if (dd->sddiv_mask) {
- _lookup_sddiv(clk, &sd_div, dd->last_rounded_m,
- dd->last_rounded_n);
- v &= ~(dd->sddiv_mask);
- v |= sd_div << __ffs(dd->sddiv_mask);
- }
-
- omap2_clk_writel(v, clk, dd->mult_div1_reg);
-
- /* Set 4X multiplier and low-power mode */
- if (dd->m4xen_mask || dd->lpmode_mask) {
- v = omap2_clk_readl(clk, dd->control_reg);
-
- if (dd->m4xen_mask) {
- if (dd->last_rounded_m4xen)
- v |= dd->m4xen_mask;
- else
- v &= ~dd->m4xen_mask;
- }
-
- if (dd->lpmode_mask) {
- if (dd->last_rounded_lpmode)
- v |= dd->lpmode_mask;
- else
- v &= ~dd->lpmode_mask;
- }
-
- omap2_clk_writel(v, clk, dd->control_reg);
- }
-
- /* We let the clock framework set the other output dividers later */
-
- /* REVISIT: Set ramp-up delay? */
-
- _omap3_noncore_dpll_lock(clk);
-
- return 0;
-}
-
-/* Public functions */
-
-/**
- * omap3_dpll_recalc - recalculate DPLL rate
- * @clk: DPLL struct clk
- *
- * Recalculate and propagate the DPLL rate.
- */
-unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-
- return omap2_get_dpll_rate(clk);
-}
-
-/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
-
-/**
- * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
- * The choice of modes depends on the DPLL's programmed rate: if it is
- * the same as the DPLL's parent clock, it will enter bypass;
- * otherwise, it will enter lock. This code will wait for the DPLL to
- * indicate readiness before returning, unless the DPLL takes too long
- * to enter the target state. Intended to be used as the struct clk's
- * enable function. If DPLL3 was passed in, or the DPLL does not
- * support low-power stop, or if the DPLL took too long to enter
- * bypass or lock, return -EINVAL; otherwise, return 0.
- */
-int omap3_noncore_dpll_enable(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- int r;
- struct dpll_data *dd;
- struct clk_hw *parent;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- if (clk->clkdm) {
- r = clkdm_clk_enable(clk->clkdm, hw->clk);
- if (r) {
- WARN(1,
- "%s: could not enable %s's clockdomain %s: %d\n",
- __func__, __clk_get_name(hw->clk),
- clk->clkdm->name, r);
- return r;
- }
- }
-
- parent = __clk_get_hw(__clk_get_parent(hw->clk));
-
- if (__clk_get_rate(hw->clk) == __clk_get_rate(dd->clk_bypass)) {
- WARN_ON(parent != __clk_get_hw(dd->clk_bypass));
- r = _omap3_noncore_dpll_bypass(clk);
- } else {
- WARN_ON(parent != __clk_get_hw(dd->clk_ref));
- r = _omap3_noncore_dpll_lock(clk);
- }
-
- return r;
-}
-
-/**
- * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power stop. This function is
- * intended for use in struct clkops. No return value.
- */
-void omap3_noncore_dpll_disable(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-
- _omap3_noncore_dpll_stop(clk);
- if (clk->clkdm)
- clkdm_clk_disable(clk->clkdm, hw->clk);
-}
-
-
-/* Non-CORE DPLL rate set code */
-
-/**
- * omap3_noncore_dpll_determine_rate - determine rate for a DPLL
- * @hw: pointer to the clock to determine rate for
- * @rate: target rate for the DPLL
- * @best_parent_rate: pointer for returning best parent rate
- * @best_parent_clk: pointer for returning best parent clock
- *
- * Determines which DPLL mode to use for reaching a desired target rate.
- * Checks whether the DPLL shall be in bypass or locked mode, and if
- * locked, calculates the M,N values for the DPLL via round-rate.
- * Returns a positive clock rate with success, negative error value
- * in failure.
- */
-long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- struct dpll_data *dd;
-
- if (!hw || !rate)
- return -EINVAL;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- if (__clk_get_rate(dd->clk_bypass) == rate &&
- (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
- *best_parent_clk = __clk_get_hw(dd->clk_bypass);
- } else {
- rate = omap2_dpll_round_rate(hw, rate, best_parent_rate);
- *best_parent_clk = __clk_get_hw(dd->clk_ref);
- }
-
- *best_parent_rate = rate;
-
- return rate;
-}
-
-/**
- * omap3_noncore_dpll_set_parent - set parent for a DPLL clock
- * @hw: pointer to the clock to set parent for
- * @index: parent index to select
- *
- * Sets parent for a DPLL clock. This sets the DPLL into bypass or
- * locked mode. Returns 0 with success, negative error value otherwise.
- */
-int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- int ret;
-
- if (!hw)
- return -EINVAL;
-
- if (index)
- ret = _omap3_noncore_dpll_bypass(clk);
- else
- ret = _omap3_noncore_dpll_lock(clk);
-
- return ret;
-}
-
-/**
- * omap3_noncore_dpll_set_rate - set rate for a DPLL clock
- * @hw: pointer to the clock to set parent for
- * @rate: target rate for the clock
- * @parent_rate: rate of the parent clock
- *
- * Sets rate for a DPLL clock. First checks if the clock parent is
- * reference clock (in bypass mode, the rate of the clock can't be
- * changed) and proceeds with the rate change operation. Returns 0
- * with success, negative error value otherwise.
- */
-int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- struct dpll_data *dd;
- u16 freqsel = 0;
- int ret;
-
- if (!hw || !rate)
- return -EINVAL;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- if (__clk_get_hw(__clk_get_parent(hw->clk)) !=
- __clk_get_hw(dd->clk_ref))
- return -EINVAL;
-
- if (dd->last_rounded_rate == 0)
- return -EINVAL;
-
- /* Freqsel is available only on OMAP343X devices */
- if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
- freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
- WARN_ON(!freqsel);
- }
-
- pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__,
- __clk_get_name(hw->clk), rate);
-
- ret = omap3_noncore_dpll_program(clk, freqsel);
-
- return ret;
-}
-
-/**
- * omap3_noncore_dpll_set_rate_and_parent - set rate and parent for a DPLL clock
- * @hw: pointer to the clock to set rate and parent for
- * @rate: target rate for the DPLL
- * @parent_rate: clock rate of the DPLL parent
- * @index: new parent index for the DPLL, 0 - reference, 1 - bypass
- *
- * Sets rate and parent for a DPLL clock. If new parent is the bypass
- * clock, only selects the parent. Otherwise proceeds with a rate
- * change, as this will effectively also change the parent as the
- * DPLL is put into locked mode. Returns 0 with success, negative error
- * value otherwise.
- */
-int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
- unsigned long rate,
- unsigned long parent_rate,
- u8 index)
-{
- int ret;
-
- if (!hw || !rate)
- return -EINVAL;
-
- /*
- * clk-ref at index[0], in which case we only need to set rate,
- * the parent will be changed automatically with the lock sequence.
- * With clk-bypass case we only need to change parent.
- */
- if (index)
- ret = omap3_noncore_dpll_set_parent(hw, index);
- else
- ret = omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
-
- return ret;
-}
-
-/* DPLL autoidle read/set code */
-
-/**
- * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
- * @clk: struct clk * of the DPLL to read
- *
- * Return the DPLL's autoidle bits, shifted down to bit 0. Returns
- * -EINVAL if passed a null pointer or if the struct clk does not
- * appear to refer to a DPLL.
- */
-u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk)
-{
- const struct dpll_data *dd;
- u32 v;
-
- if (!clk || !clk->dpll_data)
- return -EINVAL;
-
- dd = clk->dpll_data;
-
- if (!dd->autoidle_reg)
- return -EINVAL;
-
- v = omap2_clk_readl(clk, dd->autoidle_reg);
- v &= dd->autoidle_mask;
- v >>= __ffs(dd->autoidle_mask);
-
- return v;
-}
-
-/**
- * omap3_dpll_allow_idle - enable DPLL autoidle bits
- * @clk: struct clk * of the DPLL to operate on
- *
- * Enable DPLL automatic idle control. This automatic idle mode
- * switching takes effect only when the DPLL is locked, at least on
- * OMAP3430. The DPLL will enter low-power stop when its downstream
- * clocks are gated. No return value.
- */
-void omap3_dpll_allow_idle(struct clk_hw_omap *clk)
-{
- const struct dpll_data *dd;
- u32 v;
-
- if (!clk || !clk->dpll_data)
- return;
-
- dd = clk->dpll_data;
-
- if (!dd->autoidle_reg)
- return;
-
- /*
- * REVISIT: CORE DPLL can optionally enter low-power bypass
- * by writing 0x5 instead of 0x1. Add some mechanism to
- * optionally enter this mode.
- */
- v = omap2_clk_readl(clk, dd->autoidle_reg);
- v &= ~dd->autoidle_mask;
- v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
- omap2_clk_writel(v, clk, dd->autoidle_reg);
-
-}
-
-/**
- * omap3_dpll_deny_idle - prevent DPLL from automatically idling
- * @clk: struct clk * of the DPLL to operate on
- *
- * Disable DPLL automatic idle control. No return value.
- */
-void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
-{
- const struct dpll_data *dd;
- u32 v;
-
- if (!clk || !clk->dpll_data)
- return;
-
- dd = clk->dpll_data;
-
- if (!dd->autoidle_reg)
- return;
-
- v = omap2_clk_readl(clk, dd->autoidle_reg);
- v &= ~dd->autoidle_mask;
- v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
- omap2_clk_writel(v, clk, dd->autoidle_reg);
-
-}
-
-/* Clock control for DPLL outputs */
-
-/* Find the parent DPLL for the given clkoutx2 clock */
-static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
-{
- struct clk_hw_omap *pclk = NULL;
- struct clk *parent;
-
- /* Walk up the parents of clk, looking for a DPLL */
- do {
- do {
- parent = __clk_get_parent(hw->clk);
- hw = __clk_get_hw(parent);
- } while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
- if (!hw)
- break;
- pclk = to_clk_hw_omap(hw);
- } while (pclk && !pclk->dpll_data);
-
- /* clk does not have a DPLL as a parent? error in the clock data */
- if (!pclk) {
- WARN_ON(1);
- return NULL;
- }
-
- return pclk;
-}
-
-/**
- * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
- * @clk: DPLL output struct clk
- *
- * Using parent clock DPLL data, look up DPLL state. If locked, set our
- * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
- */
-unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- const struct dpll_data *dd;
- unsigned long rate;
- u32 v;
- struct clk_hw_omap *pclk = NULL;
-
- if (!parent_rate)
- return 0;
-
- pclk = omap3_find_clkoutx2_dpll(hw);
-
- if (!pclk)
- return 0;
-
- dd = pclk->dpll_data;
-
- WARN_ON(!dd->enable_mask);
-
- v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
- v >>= __ffs(dd->enable_mask);
- if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
- rate = parent_rate;
- else
- rate = parent_rate * 2;
- return rate;
-}
-
-int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- return 0;
-}
-
-long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate)
-{
- const struct dpll_data *dd;
- u32 v;
- struct clk_hw_omap *pclk = NULL;
-
- if (!*prate)
- return 0;
-
- pclk = omap3_find_clkoutx2_dpll(hw);
-
- if (!pclk)
- return 0;
-
- dd = pclk->dpll_data;
-
- /* TYPE J does not have a clkoutx2 */
- if (dd->flags & DPLL_J_TYPE) {
- *prate = __clk_round_rate(__clk_get_parent(pclk->hw.clk), rate);
- return *prate;
- }
-
- WARN_ON(!dd->enable_mask);
-
- v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
- v >>= __ffs(dd->enable_mask);
-
- /* If in bypass, the rate is fixed to the bypass rate*/
- if (v != OMAP3XXX_EN_DPLL_LOCKED)
- return *prate;
-
- if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
- unsigned long best_parent;
-
- best_parent = (rate / 2);
- *prate = __clk_round_rate(__clk_get_parent(hw->clk),
- best_parent);
- }
-
- return *prate * 2;
-}
-
-/* OMAP3/4 non-CORE DPLL clkops */
-const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
- .allow_idle = omap3_dpll_allow_idle,
- .deny_idle = omap3_dpll_deny_idle,
-};
+++ /dev/null
-/*
- * OMAP4-specific DPLL control functions
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Rajendra Nayak
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/bitops.h>
-
-#include "clock.h"
-
-/*
- * Maximum DPLL input frequency (FINT) and output frequency (FOUT) that
- * can supported when using the DPLL low-power mode. Frequencies are
- * defined in OMAP4430/60 Public TRM section 3.6.3.3.2 "Enable Control,
- * Status, and Low-Power Operation Mode".
- */
-#define OMAP4_DPLL_LP_FINT_MAX 1000000
-#define OMAP4_DPLL_LP_FOUT_MAX 100000000
-
-/*
- * Bitfield declarations
- */
-#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8)
-#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK (1 << 10)
-#define OMAP4430_DPLL_REGM4XEN_MASK (1 << 11)
-
-/* Static rate multiplier for OMAP4 REGM4XEN clocks */
-#define OMAP4430_REGM4XEN_MULT 4
-
-void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk)
-{
- u32 v;
- u32 mask;
-
- if (!clk || !clk->clksel_reg)
- return;
-
- mask = clk->flags & CLOCK_CLKOUTX2 ?
- OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
- OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
-
- v = omap2_clk_readl(clk, clk->clksel_reg);
- /* Clear the bit to allow gatectrl */
- v &= ~mask;
- omap2_clk_writel(v, clk, clk->clksel_reg);
-}
-
-void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
-{
- u32 v;
- u32 mask;
-
- if (!clk || !clk->clksel_reg)
- return;
-
- mask = clk->flags & CLOCK_CLKOUTX2 ?
- OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
- OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
-
- v = omap2_clk_readl(clk, clk->clksel_reg);
- /* Set the bit to deny gatectrl */
- v |= mask;
- omap2_clk_writel(v, clk, clk->clksel_reg);
-}
-
-const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = {
- .allow_idle = omap4_dpllmx_allow_gatectrl,
- .deny_idle = omap4_dpllmx_deny_gatectrl,
-};
-
-/**
- * omap4_dpll_lpmode_recalc - compute DPLL low-power setting
- * @dd: pointer to the dpll data structure
- *
- * Calculates if low-power mode can be enabled based upon the last
- * multiplier and divider values calculated. If low-power mode can be
- * enabled, then the bit to enable low-power mode is stored in the
- * last_rounded_lpmode variable. This implementation is based upon the
- * criteria for enabling low-power mode as described in the OMAP4430/60
- * Public TRM section 3.6.3.3.2 "Enable Control, Status, and Low-Power
- * Operation Mode".
- */
-static void omap4_dpll_lpmode_recalc(struct dpll_data *dd)
-{
- long fint, fout;
-
- fint = __clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1);
- fout = fint * dd->last_rounded_m;
-
- if ((fint < OMAP4_DPLL_LP_FINT_MAX) && (fout < OMAP4_DPLL_LP_FOUT_MAX))
- dd->last_rounded_lpmode = 1;
- else
- dd->last_rounded_lpmode = 0;
-}
-
-/**
- * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
- * @clk: struct clk * of the DPLL to compute the rate for
- *
- * Compute the output rate for the OMAP4 DPLL represented by @clk.
- * Takes the REGM4XEN bit into consideration, which is needed for the
- * OMAP4 ABE DPLL. Returns the DPLL's output rate (before M-dividers)
- * upon success, or 0 upon error.
- */
-unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 v;
- unsigned long rate;
- struct dpll_data *dd;
-
- if (!clk || !clk->dpll_data)
- return 0;
-
- dd = clk->dpll_data;
-
- rate = omap2_get_dpll_rate(clk);
-
- /* regm4xen adds a multiplier of 4 to DPLL calculations */
- v = omap2_clk_readl(clk, dd->control_reg);
- if (v & OMAP4430_DPLL_REGM4XEN_MASK)
- rate *= OMAP4430_REGM4XEN_MULT;
-
- return rate;
-}
-
-/**
- * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit
- * @clk: struct clk * of the DPLL to round a rate for
- * @target_rate: the desired rate of the DPLL
- *
- * Compute the rate that would be programmed into the DPLL hardware
- * for @clk if set_rate() were to be provided with the rate
- * @target_rate. Takes the REGM4XEN bit into consideration, which is
- * needed for the OMAP4 ABE DPLL. Returns the rounded rate (before
- * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or
- * ~0 if an error occurred in omap2_dpll_round_rate().
- */
-long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
- unsigned long target_rate,
- unsigned long *parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- struct dpll_data *dd;
- long r;
-
- if (!clk || !clk->dpll_data)
- return -EINVAL;
-
- dd = clk->dpll_data;
-
- dd->last_rounded_m4xen = 0;
-
- /*
- * First try to compute the DPLL configuration for
- * target rate without using the 4X multiplier.
- */
- r = omap2_dpll_round_rate(hw, target_rate, NULL);
- if (r != ~0)
- goto out;
-
- /*
- * If we did not find a valid DPLL configuration, try again, but
- * this time see if using the 4X multiplier can help. Enabling the
- * 4X multiplier is equivalent to dividing the target rate by 4.
- */
- r = omap2_dpll_round_rate(hw, target_rate / OMAP4430_REGM4XEN_MULT,
- NULL);
- if (r == ~0)
- return r;
-
- dd->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
- dd->last_rounded_m4xen = 1;
-
-out:
- omap4_dpll_lpmode_recalc(dd);
-
- return dd->last_rounded_rate;
-}
-
-/**
- * omap4_dpll_regm4xen_determine_rate - determine rate for a DPLL
- * @hw: pointer to the clock to determine rate for
- * @rate: target rate for the DPLL
- * @best_parent_rate: pointer for returning best parent rate
- * @best_parent_clk: pointer for returning best parent clock
- *
- * Determines which DPLL mode to use for reaching a desired rate.
- * Checks whether the DPLL shall be in bypass or locked mode, and if
- * locked, calculates the M,N values for the DPLL via round-rate.
- * Returns a positive clock rate with success, negative error value
- * in failure.
- */
-long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- struct dpll_data *dd;
-
- if (!hw || !rate)
- return -EINVAL;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- if (__clk_get_rate(dd->clk_bypass) == rate &&
- (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
- *best_parent_clk = __clk_get_hw(dd->clk_bypass);
- } else {
- rate = omap4_dpll_regm4xen_round_rate(hw, rate,
- best_parent_rate);
- *best_parent_clk = __clk_get_hw(dd->clk_ref);
- }
-
- *best_parent_rate = rate;
-
- return rate;
-}
#include "clock.h"
#include "clock2xxx.h"
#include "clock3xxx.h"
-#include "clock44xx.h"
#include "omap-pm.h"
#include "sdrc.h"
#include "control.h"
ti_clk_init_features();
+ omap2_clk_setup_ll_ops();
+
if (of_have_populated_dt()) {
ret = omap_control_init();
if (ret)
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/io.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/sysfs.h>
#include <linux/module.h>
#include <linux/delay.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/irq.h>
#include <linux/time.h>
#include <linux/of_platform.h>
#include <linux/cpu.h>
#include <linux/mbus.h>
-#include <linux/clk-provider.h>
#include <linux/clocksource.h>
#include <asm/system_misc.h>
#include <asm/mach/arch.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/clk-provider.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
#include <linux/kexec.h>
#include <linux/crash_dump.h>
#include <linux/root_dev.h>
-#include <linux/clk-provider.h>
#include <linux/cpu.h>
#include <linux/interrupt.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/slab.h>
return div1;
}
-static long alchemy_clk_fgcs_detr(struct clk_hw *hw, unsigned long rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk,
- int scale, int maxdiv)
+static int alchemy_clk_fgcs_detr(struct clk_hw *hw,
+ struct clk_rate_request *req,
+ int scale, int maxdiv)
{
struct clk *pc, *bpc, *free;
long tdv, tpr, pr, nr, br, bpr, diff, lastdiff;
}
pr = clk_get_rate(pc);
- if (pr < rate)
+ if (pr < req->rate)
continue;
/* what can hardware actually provide */
- tdv = alchemy_calc_div(rate, pr, scale, maxdiv, NULL);
+ tdv = alchemy_calc_div(req->rate, pr, scale, maxdiv, NULL);
nr = pr / tdv;
- diff = rate - nr;
- if (nr > rate)
+ diff = req->rate - nr;
+ if (nr > req->rate)
continue;
if (diff < lastdiff) {
*/
if (lastdiff && free) {
for (j = (maxdiv == 4) ? 1 : scale; j <= maxdiv; j += scale) {
- tpr = rate * j;
+ tpr = req->rate * j;
if (tpr < 0)
break;
pr = clk_round_rate(free, tpr);
- tdv = alchemy_calc_div(rate, pr, scale, maxdiv, NULL);
+ tdv = alchemy_calc_div(req->rate, pr, scale, maxdiv,
+ NULL);
nr = pr / tdv;
- diff = rate - nr;
- if (nr > rate)
+ diff = req->rate - nr;
+ if (nr > req->rate)
continue;
if (diff < lastdiff) {
lastdiff = diff;
}
}
- *best_parent_rate = bpr;
- *best_parent_clk = __clk_get_hw(bpc);
- return br;
+ if (br < 0)
+ return br;
+
+ req->best_parent_rate = bpr;
+ req->best_parent_hw = __clk_get_hw(bpc);
+ req->rate = br;
+
+ return 0;
}
static int alchemy_clk_fgv1_en(struct clk_hw *hw)
return parent_rate / v;
}
-static long alchemy_clk_fgv1_detr(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk)
+static int alchemy_clk_fgv1_detr(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
- return alchemy_clk_fgcs_detr(hw, rate, best_parent_rate,
- best_parent_clk, 2, 512);
+ return alchemy_clk_fgcs_detr(hw, req, 2, 512);
}
/* Au1000, Au1100, Au15x0, Au12x0 */
return t;
}
-static long alchemy_clk_fgv2_detr(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk)
+static int alchemy_clk_fgv2_detr(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
int scale, maxdiv;
maxdiv = 512;
}
- return alchemy_clk_fgcs_detr(hw, rate, best_parent_rate,
- best_parent_clk, scale, maxdiv);
+ return alchemy_clk_fgcs_detr(hw, req, scale, maxdiv);
}
/* Au1300 larger input mux, no separate disable bit, flexible divider */
return 0;
}
-static long alchemy_clk_csrc_detr(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk)
+static int alchemy_clk_csrc_detr(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
int scale = c->dt[2] == 3 ? 1 : 2; /* au1300 check */
- return alchemy_clk_fgcs_detr(hw, rate, best_parent_rate,
- best_parent_clk, scale, 4);
+ return alchemy_clk_fgcs_detr(hw, req, scale, 4);
}
static struct clk_ops alchemy_clkops_csrc = {
*/
#include <linux/bitops.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/device.h>
#include <linux/clkdev.h>
#include <linux/acpi.h>
#include <linux/err.h>
-#include <linux/clk.h>
#include <linux/pm.h>
#include "internal.h"
*/
#include <linux/acpi.h>
-#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/err.h>
obj-$(CONFIG_COMMON_CLK) += clk-mux.o
obj-$(CONFIG_COMMON_CLK) += clk-composite.o
obj-$(CONFIG_COMMON_CLK) += clk-fractional-divider.o
-obj-$(CONFIG_COMMON_CLK) += clk-gpio-gate.o
+obj-$(CONFIG_COMMON_CLK) += clk-gpio.o
ifeq ($(CONFIG_OF), y)
obj-$(CONFIG_COMMON_CLK) += clk-conf.o
endif
h32mxclk->pmc = pmc;
clk = clk_register(NULL, &h32mxclk->hw);
- if (!clk)
+ if (!clk) {
+ kfree(h32mxclk);
return;
+ }
of_clk_add_provider(np, of_clk_src_simple_get, clk);
}
irq_set_status_flags(osc->irq, IRQ_NOAUTOEN);
ret = request_irq(osc->irq, clk_main_osc_irq_handler,
IRQF_TRIGGER_HIGH, name, osc);
- if (ret)
+ if (ret) {
+ kfree(osc);
return ERR_PTR(ret);
+ }
if (bypass)
pmc_write(pmc, AT91_CKGR_MOR,
int num_parents;
unsigned int irq;
const char *name = np->name;
- int i;
num_parents = of_clk_get_parent_count(np);
if (num_parents <= 0 || num_parents > 2)
return;
- for (i = 0; i < num_parents; ++i) {
- parent_names[i] = of_clk_get_parent_name(np, i);
- if (!parent_names[i])
- return;
- }
+ of_clk_parent_fill(np, parent_names, num_parents);
of_property_read_string(np, "clock-output-names", &name);
irq_set_status_flags(master->irq, IRQ_NOAUTOEN);
ret = request_irq(master->irq, clk_master_irq_handler,
IRQF_TRIGGER_HIGH, "clk-master", master);
- if (ret)
+ if (ret) {
+ kfree(master);
return ERR_PTR(ret);
+ }
clk = clk_register(NULL, &master->hw);
- if (IS_ERR(clk))
+ if (IS_ERR(clk)) {
+ free_irq(master->irq, master);
kfree(master);
+ }
return clk;
}
{
struct clk *clk;
int num_parents;
- int i;
unsigned int irq;
const char *parent_names[MASTER_SOURCE_MAX];
const char *name = np->name;
if (num_parents <= 0 || num_parents > MASTER_SOURCE_MAX)
return;
- for (i = 0; i < num_parents; ++i) {
- parent_names[i] = of_clk_get_parent_name(np, i);
- if (!parent_names[i])
- return;
- }
+ of_clk_parent_fill(np, parent_names, num_parents);
of_property_read_string(np, "clock-output-names", &name);
irq_set_status_flags(pll->irq, IRQ_NOAUTOEN);
ret = request_irq(pll->irq, clk_pll_irq_handler, IRQF_TRIGGER_HIGH,
id ? "clk-pllb" : "clk-plla", pll);
- if (ret)
+ if (ret) {
+ kfree(pll);
return ERR_PTR(ret);
+ }
clk = clk_register(NULL, &pll->hw);
- if (IS_ERR(clk))
+ if (IS_ERR(clk)) {
+ free_irq(pll->irq, pll);
kfree(pll);
+ }
return clk;
}
return parent_rate >> pres;
}
-static long clk_programmable_determine_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_hw)
+static int clk_programmable_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct clk *parent = NULL;
long best_rate = -EINVAL;
parent_rate = __clk_get_rate(parent);
for (shift = 0; shift < PROG_PRES_MASK; shift++) {
tmp_rate = parent_rate >> shift;
- if (tmp_rate <= rate)
+ if (tmp_rate <= req->rate)
break;
}
- if (tmp_rate > rate)
+ if (tmp_rate > req->rate)
continue;
- if (best_rate < 0 || (rate - tmp_rate) < (rate - best_rate)) {
+ if (best_rate < 0 ||
+ (req->rate - tmp_rate) < (req->rate - best_rate)) {
best_rate = tmp_rate;
- *best_parent_rate = parent_rate;
- *best_parent_hw = __clk_get_hw(parent);
+ req->best_parent_rate = parent_rate;
+ req->best_parent_hw = __clk_get_hw(parent);
}
if (!best_rate)
break;
}
- return best_rate;
+ if (best_rate < 0)
+ return best_rate;
+
+ req->rate = best_rate;
+ return 0;
}
static int clk_programmable_set_parent(struct clk_hw *hw, u8 index)
{
int num;
u32 id;
- int i;
struct clk *clk;
int num_parents;
const char *parent_names[PROG_SOURCE_MAX];
if (num_parents <= 0 || num_parents > PROG_SOURCE_MAX)
return;
- for (i = 0; i < num_parents; ++i) {
- parent_names[i] = of_clk_get_parent_name(np, i);
- if (!parent_names[i])
- return;
- }
+ of_clk_parent_fill(np, parent_names, num_parents);
num = of_get_child_count(np);
if (!num || num > (PROG_ID_MAX + 1))
*
*/
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
+#include <linux/slab.h>
#include <linux/clk/at91_pmc.h>
#include <linux/delay.h>
#include <linux/of.h>
const char *parent_names[2];
int num_parents;
const char *name = np->name;
- int i;
num_parents = of_clk_get_parent_count(np);
if (num_parents <= 0 || num_parents > 2)
return;
- for (i = 0; i < num_parents; ++i) {
- parent_names[i] = of_clk_get_parent_name(np, i);
- if (!parent_names[i])
- return;
- }
+ of_clk_parent_fill(np, parent_names, num_parents);
of_property_read_string(np, "clock-output-names", &name);
const char *parent_names[2];
int num_parents;
const char *name = np->name;
- int i;
num_parents = of_clk_get_parent_count(np);
if (num_parents != 2)
return;
- for (i = 0; i < num_parents; ++i) {
- parent_names[i] = of_clk_get_parent_name(np, i);
- if (!parent_names[i])
- return;
- }
+ of_clk_parent_fill(np, parent_names, num_parents);
of_property_read_string(np, "clock-output-names", &name);
struct at91_pmc *pmc)
{
struct clk *clk;
- int i;
int num_parents;
const char *parent_names[SMD_SOURCE_MAX];
const char *name = np->name;
if (num_parents <= 0 || num_parents > SMD_SOURCE_MAX)
return;
- for (i = 0; i < num_parents; i++) {
- parent_names[i] = of_clk_get_parent_name(np, i);
- if (!parent_names[i])
- return;
- }
+ of_clk_parent_fill(np, parent_names, num_parents);
of_property_read_string(np, "clock-output-names", &name);
irq_set_status_flags(sys->irq, IRQ_NOAUTOEN);
ret = request_irq(sys->irq, clk_system_irq_handler,
IRQF_TRIGGER_HIGH, name, sys);
- if (ret)
+ if (ret) {
+ kfree(sys);
return ERR_PTR(ret);
+ }
}
clk = clk_register(NULL, &sys->hw);
- if (IS_ERR(clk))
+ if (IS_ERR(clk)) {
+ free_irq(sys->irq, sys);
kfree(sys);
+ }
return clk;
}
return DIV_ROUND_CLOSEST(parent_rate, (usbdiv + 1));
}
-static long at91sam9x5_clk_usb_determine_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_hw)
+static int at91sam9x5_clk_usb_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct clk *parent = NULL;
long best_rate = -EINVAL;
for (div = 1; div < SAM9X5_USB_MAX_DIV + 2; div++) {
unsigned long tmp_parent_rate;
- tmp_parent_rate = rate * div;
+ tmp_parent_rate = req->rate * div;
tmp_parent_rate = __clk_round_rate(parent,
tmp_parent_rate);
tmp_rate = DIV_ROUND_CLOSEST(tmp_parent_rate, div);
- if (tmp_rate < rate)
- tmp_diff = rate - tmp_rate;
+ if (tmp_rate < req->rate)
+ tmp_diff = req->rate - tmp_rate;
else
- tmp_diff = tmp_rate - rate;
+ tmp_diff = tmp_rate - req->rate;
if (best_diff < 0 || best_diff > tmp_diff) {
best_rate = tmp_rate;
best_diff = tmp_diff;
- *best_parent_rate = tmp_parent_rate;
- *best_parent_hw = __clk_get_hw(parent);
+ req->best_parent_rate = tmp_parent_rate;
+ req->best_parent_hw = __clk_get_hw(parent);
}
- if (!best_diff || tmp_rate < rate)
+ if (!best_diff || tmp_rate < req->rate)
break;
}
break;
}
- return best_rate;
+ if (best_rate < 0)
+ return best_rate;
+
+ req->rate = best_rate;
+ return 0;
}
static int at91sam9x5_clk_usb_set_parent(struct clk_hw *hw, u8 index)
struct at91_pmc *pmc)
{
struct clk *clk;
- int i;
int num_parents;
const char *parent_names[USB_SOURCE_MAX];
const char *name = np->name;
if (num_parents <= 0 || num_parents > USB_SOURCE_MAX)
return;
- for (i = 0; i < num_parents; i++) {
- parent_names[i] = of_clk_get_parent_name(np, i);
- if (!parent_names[i])
- return;
- }
+ of_clk_parent_fill(np, parent_names, num_parents);
of_property_read_string(np, "clock-output-names", &name);
irq_set_status_flags(utmi->irq, IRQ_NOAUTOEN);
ret = request_irq(utmi->irq, clk_utmi_irq_handler,
IRQF_TRIGGER_HIGH, "clk-utmi", utmi);
- if (ret)
+ if (ret) {
+ kfree(utmi);
return ERR_PTR(ret);
+ }
clk = clk_register(NULL, &utmi->hw);
- if (IS_ERR(clk))
+ if (IS_ERR(clk)) {
+ free_irq(utmi->irq, utmi);
kfree(utmi);
+ }
return clk;
}
int of_at91_get_clk_range(struct device_node *np, const char *propname,
struct clk_range *range);
-extern void __init of_at91sam9260_clk_slow_setup(struct device_node *np,
- struct at91_pmc *pmc);
-
-extern void __init of_at91rm9200_clk_main_osc_setup(struct device_node *np,
- struct at91_pmc *pmc);
-extern void __init of_at91sam9x5_clk_main_rc_osc_setup(struct device_node *np,
- struct at91_pmc *pmc);
-extern void __init of_at91rm9200_clk_main_setup(struct device_node *np,
- struct at91_pmc *pmc);
-extern void __init of_at91sam9x5_clk_main_setup(struct device_node *np,
- struct at91_pmc *pmc);
-
-extern void __init of_at91rm9200_clk_pll_setup(struct device_node *np,
- struct at91_pmc *pmc);
-extern void __init of_at91sam9g45_clk_pll_setup(struct device_node *np,
- struct at91_pmc *pmc);
-extern void __init of_at91sam9g20_clk_pllb_setup(struct device_node *np,
- struct at91_pmc *pmc);
-extern void __init of_sama5d3_clk_pll_setup(struct device_node *np,
- struct at91_pmc *pmc);
-extern void __init of_at91sam9x5_clk_plldiv_setup(struct device_node *np,
- struct at91_pmc *pmc);
-
-extern void __init of_at91rm9200_clk_master_setup(struct device_node *np,
- struct at91_pmc *pmc);
-extern void __init of_at91sam9x5_clk_master_setup(struct device_node *np,
- struct at91_pmc *pmc);
-
-extern void __init of_at91rm9200_clk_sys_setup(struct device_node *np,
- struct at91_pmc *pmc);
-
-extern void __init of_at91rm9200_clk_periph_setup(struct device_node *np,
- struct at91_pmc *pmc);
-extern void __init of_at91sam9x5_clk_periph_setup(struct device_node *np,
- struct at91_pmc *pmc);
-
-extern void __init of_at91rm9200_clk_prog_setup(struct device_node *np,
- struct at91_pmc *pmc);
-extern void __init of_at91sam9g45_clk_prog_setup(struct device_node *np,
- struct at91_pmc *pmc);
-extern void __init of_at91sam9x5_clk_prog_setup(struct device_node *np,
- struct at91_pmc *pmc);
-
-#if defined(CONFIG_HAVE_AT91_UTMI)
-extern void __init of_at91sam9x5_clk_utmi_setup(struct device_node *np,
- struct at91_pmc *pmc);
-#endif
-
-#if defined(CONFIG_HAVE_AT91_USB_CLK)
-extern void __init of_at91rm9200_clk_usb_setup(struct device_node *np,
- struct at91_pmc *pmc);
-extern void __init of_at91sam9x5_clk_usb_setup(struct device_node *np,
- struct at91_pmc *pmc);
-extern void __init of_at91sam9n12_clk_usb_setup(struct device_node *np,
- struct at91_pmc *pmc);
-#endif
-
-#if defined(CONFIG_HAVE_AT91_SMD)
-extern void __init of_at91sam9x5_clk_smd_setup(struct device_node *np,
- struct at91_pmc *pmc);
-#endif
-
-#if defined(CONFIG_HAVE_AT91_H32MX)
-extern void __init of_sama5d4_clk_h32mx_setup(struct device_node *np,
- struct at91_pmc *pmc);
-#endif
+void of_at91sam9260_clk_slow_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+
+void of_at91rm9200_clk_main_osc_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+void of_at91sam9x5_clk_main_rc_osc_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+void of_at91rm9200_clk_main_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+void of_at91sam9x5_clk_main_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+
+void of_at91rm9200_clk_pll_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+void of_at91sam9g45_clk_pll_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+void of_at91sam9g20_clk_pllb_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+void of_sama5d3_clk_pll_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+void of_at91sam9x5_clk_plldiv_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+
+void of_at91rm9200_clk_master_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+void of_at91sam9x5_clk_master_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+
+void of_at91rm9200_clk_sys_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+
+void of_at91rm9200_clk_periph_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+void of_at91sam9x5_clk_periph_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+
+void of_at91rm9200_clk_prog_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+void of_at91sam9g45_clk_prog_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+void of_at91sam9x5_clk_prog_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+
+void of_at91sam9x5_clk_utmi_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+
+void of_at91rm9200_clk_usb_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+void of_at91sam9x5_clk_usb_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+void of_at91sam9n12_clk_usb_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+
+void of_at91sam9x5_clk_smd_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+
+void of_sama5d4_clk_h32mx_setup(struct device_node *np,
+ struct at91_pmc *pmc);
#endif /* __PMC_H_ */
struct iproc_asiu_clk *asiu_clk;
const char *clk_name;
- clk_name = kzalloc(IPROC_CLK_NAME_LEN, GFP_KERNEL);
- if (WARN_ON(!clk_name))
- goto err_clk_register;
-
ret = of_property_read_string_index(node, "clock-output-names",
i, &clk_name);
if (WARN_ON(ret))
err_clk_register:
for (i = 0; i < num_clks; i++)
- kfree(asiu->clks[i].name);
+ clk_unregister(asiu->clk_data.clks[i]);
iounmap(asiu->gate_base);
err_iomap_gate:
val = readl(pll->pll_base + ctrl->ndiv_int.offset);
ndiv_int = (val >> ctrl->ndiv_int.shift) &
bit_mask(ctrl->ndiv_int.width);
- ndiv = ndiv_int << ctrl->ndiv_int.shift;
+ ndiv = (u64)ndiv_int << ctrl->ndiv_int.shift;
if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
val = readl(pll->pll_base + ctrl->ndiv_frac.offset);
bit_mask(ctrl->ndiv_frac.width);
if (ndiv_frac != 0)
- ndiv = (ndiv_int << ctrl->ndiv_int.shift) | ndiv_frac;
+ ndiv = ((u64)ndiv_int << ctrl->ndiv_int.shift) |
+ ndiv_frac;
}
val = readl(pll->pll_base + ctrl->pdiv.offset);
memset(&init, 0, sizeof(init));
parent_name = node->name;
- clk_name = kzalloc(IPROC_CLK_NAME_LEN, GFP_KERNEL);
- if (WARN_ON(!clk_name))
- goto err_clk_register;
-
ret = of_property_read_string_index(node, "clock-output-names",
i, &clk_name);
if (WARN_ON(ret))
return;
err_clk_register:
- for (i = 0; i < num_clks; i++) {
- kfree(pll->clks[i].name);
+ for (i = 0; i < num_clks; i++)
clk_unregister(pll->clk_data.clks[i]);
- }
err_pll_register:
if (pll->asiu_base)
#include <linux/delay.h>
#include <linux/kernel.h>
+#include <linux/clk.h>
/*
* "Policies" affect the frequencies of bus clocks provided by a
rate ? rate : 1, *parent_rate, NULL);
}
-static long kona_peri_clk_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate, struct clk_hw **best_parent)
+static int kona_peri_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct kona_clk *bcm_clk = to_kona_clk(hw);
struct clk *clk = hw->clk;
unsigned long best_delta;
unsigned long best_rate;
u32 parent_count;
+ long rate;
u32 which;
/*
*/
WARN_ON_ONCE(bcm_clk->init_data.flags & CLK_SET_RATE_NO_REPARENT);
parent_count = (u32)bcm_clk->init_data.num_parents;
- if (parent_count < 2)
- return kona_peri_clk_round_rate(hw, rate, best_parent_rate);
+ if (parent_count < 2) {
+ rate = kona_peri_clk_round_rate(hw, req->rate,
+ &req->best_parent_rate);
+ if (rate < 0)
+ return rate;
+
+ req->rate = rate;
+ return 0;
+ }
/* Unless we can do better, stick with current parent */
current_parent = clk_get_parent(clk);
parent_rate = __clk_get_rate(current_parent);
- best_rate = kona_peri_clk_round_rate(hw, rate, &parent_rate);
- best_delta = abs(best_rate - rate);
+ best_rate = kona_peri_clk_round_rate(hw, req->rate, &parent_rate);
+ best_delta = abs(best_rate - req->rate);
/* Check whether any other parent clock can produce a better result */
for (which = 0; which < parent_count; which++) {
/* We don't support CLK_SET_RATE_PARENT */
parent_rate = __clk_get_rate(parent);
- other_rate = kona_peri_clk_round_rate(hw, rate, &parent_rate);
- delta = abs(other_rate - rate);
+ other_rate = kona_peri_clk_round_rate(hw, req->rate,
+ &parent_rate);
+ delta = abs(other_rate - req->rate);
if (delta < best_delta) {
best_delta = delta;
best_rate = other_rate;
- *best_parent = __clk_get_hw(parent);
- *best_parent_rate = parent_rate;
+ req->best_parent_hw = __clk_get_hw(parent);
+ req->best_parent_rate = parent_rate;
}
}
- return best_rate;
+ req->rate = best_rate;
+ return 0;
}
static int kona_peri_clk_set_parent(struct clk_hw *hw, u8 index)
#include <linux/platform_device.h>
#include <linux/clk-provider.h>
-#include <linux/clk.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/of.h>
* published by the Free Software Foundation.
*/
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/i2c.h>
* Copyright (C) 2014, Topic Embedded Products
* Licenced under GPL
*/
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/module.h>
* (at your option) any later version.
*/
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/io.h>
return rate_ops->recalc_rate(rate_hw, parent_rate);
}
-static long clk_composite_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_p)
+static int clk_composite_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct clk_composite *composite = to_clk_composite(hw);
const struct clk_ops *rate_ops = composite->rate_ops;
long tmp_rate, best_rate = 0;
unsigned long rate_diff;
unsigned long best_rate_diff = ULONG_MAX;
+ long rate;
int i;
if (rate_hw && rate_ops && rate_ops->determine_rate) {
__clk_hw_set_clk(rate_hw, hw);
- return rate_ops->determine_rate(rate_hw, rate, min_rate,
- max_rate,
- best_parent_rate,
- best_parent_p);
+ return rate_ops->determine_rate(rate_hw, req);
} else if (rate_hw && rate_ops && rate_ops->round_rate &&
mux_hw && mux_ops && mux_ops->set_parent) {
- *best_parent_p = NULL;
+ req->best_parent_hw = NULL;
if (__clk_get_flags(hw->clk) & CLK_SET_RATE_NO_REPARENT) {
parent = clk_get_parent(mux_hw->clk);
- *best_parent_p = __clk_get_hw(parent);
- *best_parent_rate = __clk_get_rate(parent);
+ req->best_parent_hw = __clk_get_hw(parent);
+ req->best_parent_rate = __clk_get_rate(parent);
- return rate_ops->round_rate(rate_hw, rate,
- best_parent_rate);
+ rate = rate_ops->round_rate(rate_hw, req->rate,
+ &req->best_parent_rate);
+ if (rate < 0)
+ return rate;
+
+ req->rate = rate;
+ return 0;
}
for (i = 0; i < __clk_get_num_parents(mux_hw->clk); i++) {
parent_rate = __clk_get_rate(parent);
- tmp_rate = rate_ops->round_rate(rate_hw, rate,
+ tmp_rate = rate_ops->round_rate(rate_hw, req->rate,
&parent_rate);
if (tmp_rate < 0)
continue;
- rate_diff = abs(rate - tmp_rate);
+ rate_diff = abs(req->rate - tmp_rate);
- if (!rate_diff || !*best_parent_p
+ if (!rate_diff || !req->best_parent_hw
|| best_rate_diff > rate_diff) {
- *best_parent_p = __clk_get_hw(parent);
- *best_parent_rate = parent_rate;
+ req->best_parent_hw = __clk_get_hw(parent);
+ req->best_parent_rate = parent_rate;
best_rate_diff = rate_diff;
best_rate = tmp_rate;
}
if (!rate_diff)
- return rate;
+ return 0;
}
- return best_rate;
+ req->rate = best_rate;
+ return 0;
} else if (mux_hw && mux_ops && mux_ops->determine_rate) {
__clk_hw_set_clk(mux_hw, hw);
- return mux_ops->determine_rate(mux_hw, rate, min_rate,
- max_rate, best_parent_rate,
- best_parent_p);
+ return mux_ops->determine_rate(mux_hw, req);
} else {
pr_err("clk: clk_composite_determine_rate function called, but no mux or rate callback set!\n");
- return 0;
+ return -EINVAL;
}
}
}
static unsigned int _get_div(const struct clk_div_table *table,
- unsigned int val, unsigned long flags)
+ unsigned int val, unsigned long flags, u8 width)
{
if (flags & CLK_DIVIDER_ONE_BASED)
return val;
if (flags & CLK_DIVIDER_POWER_OF_TWO)
return 1 << val;
+ if (flags & CLK_DIVIDER_MAX_AT_ZERO)
+ return val ? val : div_mask(width) + 1;
if (table)
return _get_table_div(table, val);
return val + 1;
}
static unsigned int _get_val(const struct clk_div_table *table,
- unsigned int div, unsigned long flags)
+ unsigned int div, unsigned long flags, u8 width)
{
if (flags & CLK_DIVIDER_ONE_BASED)
return div;
if (flags & CLK_DIVIDER_POWER_OF_TWO)
return __ffs(div);
+ if (flags & CLK_DIVIDER_MAX_AT_ZERO)
+ return (div == div_mask(width) + 1) ? 0 : div;
if (table)
return _get_table_val(table, div);
return div - 1;
const struct clk_div_table *table,
unsigned long flags)
{
+ struct clk_divider *divider = to_clk_divider(hw);
unsigned int div;
- div = _get_div(table, val, flags);
+ div = _get_div(table, val, flags, divider->width);
if (!div) {
WARN(!(flags & CLK_DIVIDER_ALLOW_ZERO),
"%s: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set\n",
if (divider->flags & CLK_DIVIDER_READ_ONLY) {
bestdiv = readl(divider->reg) >> divider->shift;
bestdiv &= div_mask(divider->width);
- bestdiv = _get_div(divider->table, bestdiv, divider->flags);
+ bestdiv = _get_div(divider->table, bestdiv, divider->flags,
+ divider->width);
return DIV_ROUND_UP(*prate, bestdiv);
}
if (!_is_valid_div(table, div, flags))
return -EINVAL;
- value = _get_val(table, div, flags);
+ value = _get_val(table, div, flags, width);
return min_t(unsigned int, value, div_mask(width));
}
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <linux/clk.h>
#include <linux/io.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
+++ /dev/null
-/*
- * Copyright (C) 2013 - 2014 Texas Instruments Incorporated - http://www.ti.com
- * Author: Jyri Sarha <jsarha@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Gpio gated clock implementation
- */
-
-#include <linux/clk-provider.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/gpio.h>
-#include <linux/gpio/consumer.h>
-#include <linux/of_gpio.h>
-#include <linux/err.h>
-#include <linux/device.h>
-
-/**
- * DOC: basic gpio gated clock which can be enabled and disabled
- * with gpio output
- * Traits of this clock:
- * prepare - clk_(un)prepare only ensures parent is (un)prepared
- * enable - clk_enable and clk_disable are functional & control gpio
- * rate - inherits rate from parent. No clk_set_rate support
- * parent - fixed parent. No clk_set_parent support
- */
-
-#define to_clk_gpio(_hw) container_of(_hw, struct clk_gpio, hw)
-
-static int clk_gpio_gate_enable(struct clk_hw *hw)
-{
- struct clk_gpio *clk = to_clk_gpio(hw);
-
- gpiod_set_value(clk->gpiod, 1);
-
- return 0;
-}
-
-static void clk_gpio_gate_disable(struct clk_hw *hw)
-{
- struct clk_gpio *clk = to_clk_gpio(hw);
-
- gpiod_set_value(clk->gpiod, 0);
-}
-
-static int clk_gpio_gate_is_enabled(struct clk_hw *hw)
-{
- struct clk_gpio *clk = to_clk_gpio(hw);
-
- return gpiod_get_value(clk->gpiod);
-}
-
-const struct clk_ops clk_gpio_gate_ops = {
- .enable = clk_gpio_gate_enable,
- .disable = clk_gpio_gate_disable,
- .is_enabled = clk_gpio_gate_is_enabled,
-};
-EXPORT_SYMBOL_GPL(clk_gpio_gate_ops);
-
-/**
- * clk_register_gpio - register a gpip clock with the clock framework
- * @dev: device that is registering this clock
- * @name: name of this clock
- * @parent_name: name of this clock's parent
- * @gpio: gpio number to gate this clock
- * @active_low: true if gpio should be set to 0 to enable clock
- * @flags: clock flags
- */
-struct clk *clk_register_gpio_gate(struct device *dev, const char *name,
- const char *parent_name, unsigned gpio, bool active_low,
- unsigned long flags)
-{
- struct clk_gpio *clk_gpio = NULL;
- struct clk *clk = ERR_PTR(-EINVAL);
- struct clk_init_data init = { NULL };
- unsigned long gpio_flags;
- int err;
-
- if (active_low)
- gpio_flags = GPIOF_ACTIVE_LOW | GPIOF_OUT_INIT_HIGH;
- else
- gpio_flags = GPIOF_OUT_INIT_LOW;
-
- if (dev)
- err = devm_gpio_request_one(dev, gpio, gpio_flags, name);
- else
- err = gpio_request_one(gpio, gpio_flags, name);
-
- if (err) {
- pr_err("%s: %s: Error requesting clock control gpio %u\n",
- __func__, name, gpio);
- return ERR_PTR(err);
- }
-
- if (dev)
- clk_gpio = devm_kzalloc(dev, sizeof(struct clk_gpio),
- GFP_KERNEL);
- else
- clk_gpio = kzalloc(sizeof(struct clk_gpio), GFP_KERNEL);
-
- if (!clk_gpio) {
- clk = ERR_PTR(-ENOMEM);
- goto clk_register_gpio_gate_err;
- }
-
- init.name = name;
- init.ops = &clk_gpio_gate_ops;
- init.flags = flags | CLK_IS_BASIC;
- init.parent_names = (parent_name ? &parent_name : NULL);
- init.num_parents = (parent_name ? 1 : 0);
-
- clk_gpio->gpiod = gpio_to_desc(gpio);
- clk_gpio->hw.init = &init;
-
- clk = clk_register(dev, &clk_gpio->hw);
-
- if (!IS_ERR(clk))
- return clk;
-
- if (!dev)
- kfree(clk_gpio);
-
-clk_register_gpio_gate_err:
- if (!dev)
- gpio_free(gpio);
-
- return clk;
-}
-EXPORT_SYMBOL_GPL(clk_register_gpio_gate);
-
-#ifdef CONFIG_OF
-/**
- * The clk_register_gpio_gate has to be delayed, because the EPROBE_DEFER
- * can not be handled properly at of_clk_init() call time.
- */
-
-struct clk_gpio_gate_delayed_register_data {
- struct device_node *node;
- struct mutex lock;
- struct clk *clk;
-};
-
-static struct clk *of_clk_gpio_gate_delayed_register_get(
- struct of_phandle_args *clkspec,
- void *_data)
-{
- struct clk_gpio_gate_delayed_register_data *data = _data;
- struct clk *clk;
- const char *clk_name = data->node->name;
- const char *parent_name;
- int gpio;
- enum of_gpio_flags of_flags;
-
- mutex_lock(&data->lock);
-
- if (data->clk) {
- mutex_unlock(&data->lock);
- return data->clk;
- }
-
- gpio = of_get_named_gpio_flags(data->node, "enable-gpios", 0,
- &of_flags);
- if (gpio < 0) {
- mutex_unlock(&data->lock);
- if (gpio != -EPROBE_DEFER)
- pr_err("%s: %s: Can't get 'enable-gpios' DT property\n",
- __func__, clk_name);
- return ERR_PTR(gpio);
- }
-
- parent_name = of_clk_get_parent_name(data->node, 0);
-
- clk = clk_register_gpio_gate(NULL, clk_name, parent_name, gpio,
- of_flags & OF_GPIO_ACTIVE_LOW, 0);
- if (IS_ERR(clk)) {
- mutex_unlock(&data->lock);
- return clk;
- }
-
- data->clk = clk;
- mutex_unlock(&data->lock);
-
- return clk;
-}
-
-/**
- * of_gpio_gate_clk_setup() - Setup function for gpio controlled clock
- */
-static void __init of_gpio_gate_clk_setup(struct device_node *node)
-{
- struct clk_gpio_gate_delayed_register_data *data;
-
- data = kzalloc(sizeof(struct clk_gpio_gate_delayed_register_data),
- GFP_KERNEL);
- if (!data)
- return;
-
- data->node = node;
- mutex_init(&data->lock);
-
- of_clk_add_provider(node, of_clk_gpio_gate_delayed_register_get, data);
-}
-CLK_OF_DECLARE(gpio_gate_clk, "gpio-gate-clock", of_gpio_gate_clk_setup);
-#endif
--- /dev/null
+/*
+ * Copyright (C) 2013 - 2014 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Authors:
+ * Jyri Sarha <jsarha@ti.com>
+ * Sergej Sawazki <ce3a@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Gpio controlled clock implementation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of_gpio.h>
+#include <linux/err.h>
+#include <linux/device.h>
+
+/**
+ * DOC: basic gpio gated clock which can be enabled and disabled
+ * with gpio output
+ * Traits of this clock:
+ * prepare - clk_(un)prepare only ensures parent is (un)prepared
+ * enable - clk_enable and clk_disable are functional & control gpio
+ * rate - inherits rate from parent. No clk_set_rate support
+ * parent - fixed parent. No clk_set_parent support
+ */
+
+#define to_clk_gpio(_hw) container_of(_hw, struct clk_gpio, hw)
+
+static int clk_gpio_gate_enable(struct clk_hw *hw)
+{
+ struct clk_gpio *clk = to_clk_gpio(hw);
+
+ gpiod_set_value(clk->gpiod, 1);
+
+ return 0;
+}
+
+static void clk_gpio_gate_disable(struct clk_hw *hw)
+{
+ struct clk_gpio *clk = to_clk_gpio(hw);
+
+ gpiod_set_value(clk->gpiod, 0);
+}
+
+static int clk_gpio_gate_is_enabled(struct clk_hw *hw)
+{
+ struct clk_gpio *clk = to_clk_gpio(hw);
+
+ return gpiod_get_value(clk->gpiod);
+}
+
+const struct clk_ops clk_gpio_gate_ops = {
+ .enable = clk_gpio_gate_enable,
+ .disable = clk_gpio_gate_disable,
+ .is_enabled = clk_gpio_gate_is_enabled,
+};
+EXPORT_SYMBOL_GPL(clk_gpio_gate_ops);
+
+/**
+ * DOC: basic clock multiplexer which can be controlled with a gpio output
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * rate - rate is only affected by parent switching. No clk_set_rate support
+ * parent - parent is adjustable through clk_set_parent
+ */
+
+static u8 clk_gpio_mux_get_parent(struct clk_hw *hw)
+{
+ struct clk_gpio *clk = to_clk_gpio(hw);
+
+ return gpiod_get_value(clk->gpiod);
+}
+
+static int clk_gpio_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_gpio *clk = to_clk_gpio(hw);
+
+ gpiod_set_value(clk->gpiod, index);
+
+ return 0;
+}
+
+const struct clk_ops clk_gpio_mux_ops = {
+ .get_parent = clk_gpio_mux_get_parent,
+ .set_parent = clk_gpio_mux_set_parent,
+ .determine_rate = __clk_mux_determine_rate,
+};
+EXPORT_SYMBOL_GPL(clk_gpio_mux_ops);
+
+static struct clk *clk_register_gpio(struct device *dev, const char *name,
+ const char **parent_names, u8 num_parents, unsigned gpio,
+ bool active_low, unsigned long flags,
+ const struct clk_ops *clk_gpio_ops)
+{
+ struct clk_gpio *clk_gpio;
+ struct clk *clk;
+ struct clk_init_data init = {};
+ unsigned long gpio_flags;
+ int err;
+
+ if (dev)
+ clk_gpio = devm_kzalloc(dev, sizeof(*clk_gpio), GFP_KERNEL);
+ else
+ clk_gpio = kzalloc(sizeof(*clk_gpio), GFP_KERNEL);
+
+ if (!clk_gpio)
+ return ERR_PTR(-ENOMEM);
+
+ if (active_low)
+ gpio_flags = GPIOF_ACTIVE_LOW | GPIOF_OUT_INIT_HIGH;
+ else
+ gpio_flags = GPIOF_OUT_INIT_LOW;
+
+ if (dev)
+ err = devm_gpio_request_one(dev, gpio, gpio_flags, name);
+ else
+ err = gpio_request_one(gpio, gpio_flags, name);
+ if (err) {
+ if (err != -EPROBE_DEFER)
+ pr_err("%s: %s: Error requesting clock control gpio %u\n",
+ __func__, name, gpio);
+ if (!dev)
+ kfree(clk_gpio);
+
+ return ERR_PTR(err);
+ }
+
+ init.name = name;
+ init.ops = clk_gpio_ops;
+ init.flags = flags | CLK_IS_BASIC;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+
+ clk_gpio->gpiod = gpio_to_desc(gpio);
+ clk_gpio->hw.init = &init;
+
+ if (dev)
+ clk = devm_clk_register(dev, &clk_gpio->hw);
+ else
+ clk = clk_register(NULL, &clk_gpio->hw);
+
+ if (!IS_ERR(clk))
+ return clk;
+
+ if (!dev) {
+ gpiod_put(clk_gpio->gpiod);
+ kfree(clk_gpio);
+ }
+
+ return clk;
+}
+
+/**
+ * clk_register_gpio_gate - register a gpio clock gate with the clock framework
+ * @dev: device that is registering this clock
+ * @name: name of this clock
+ * @parent_name: name of this clock's parent
+ * @gpio: gpio number to gate this clock
+ * @active_low: true if gpio should be set to 0 to enable clock
+ * @flags: clock flags
+ */
+struct clk *clk_register_gpio_gate(struct device *dev, const char *name,
+ const char *parent_name, unsigned gpio, bool active_low,
+ unsigned long flags)
+{
+ return clk_register_gpio(dev, name,
+ (parent_name ? &parent_name : NULL),
+ (parent_name ? 1 : 0), gpio, active_low, flags,
+ &clk_gpio_gate_ops);
+}
+EXPORT_SYMBOL_GPL(clk_register_gpio_gate);
+
+/**
+ * clk_register_gpio_mux - register a gpio clock mux with the clock framework
+ * @dev: device that is registering this clock
+ * @name: name of this clock
+ * @parent_names: names of this clock's parents
+ * @num_parents: number of parents listed in @parent_names
+ * @gpio: gpio number to gate this clock
+ * @active_low: true if gpio should be set to 0 to enable clock
+ * @flags: clock flags
+ */
+struct clk *clk_register_gpio_mux(struct device *dev, const char *name,
+ const char **parent_names, u8 num_parents, unsigned gpio,
+ bool active_low, unsigned long flags)
+{
+ if (num_parents != 2) {
+ pr_err("mux-clock %s must have 2 parents\n", name);
+ return ERR_PTR(-EINVAL);
+ }
+
+ return clk_register_gpio(dev, name, parent_names, num_parents,
+ gpio, active_low, flags, &clk_gpio_mux_ops);
+}
+EXPORT_SYMBOL_GPL(clk_register_gpio_mux);
+
+#ifdef CONFIG_OF
+/**
+ * clk_register_get() has to be delayed, because -EPROBE_DEFER
+ * can not be handled properly at of_clk_init() call time.
+ */
+
+struct clk_gpio_delayed_register_data {
+ const char *gpio_name;
+ struct device_node *node;
+ struct mutex lock;
+ struct clk *clk;
+ struct clk *(*clk_register_get)(const char *name,
+ const char **parent_names, u8 num_parents,
+ unsigned gpio, bool active_low);
+};
+
+static struct clk *of_clk_gpio_delayed_register_get(
+ struct of_phandle_args *clkspec, void *_data)
+{
+ struct clk_gpio_delayed_register_data *data = _data;
+ struct clk *clk;
+ const char **parent_names;
+ int i, num_parents;
+ int gpio;
+ enum of_gpio_flags of_flags;
+
+ mutex_lock(&data->lock);
+
+ if (data->clk) {
+ mutex_unlock(&data->lock);
+ return data->clk;
+ }
+
+ gpio = of_get_named_gpio_flags(data->node, data->gpio_name, 0,
+ &of_flags);
+ if (gpio < 0) {
+ mutex_unlock(&data->lock);
+ if (gpio == -EPROBE_DEFER)
+ pr_debug("%s: %s: GPIOs not yet available, retry later\n",
+ data->node->name, __func__);
+ else
+ pr_err("%s: %s: Can't get '%s' DT property\n",
+ data->node->name, __func__,
+ data->gpio_name);
+ return ERR_PTR(gpio);
+ }
+
+ num_parents = of_clk_get_parent_count(data->node);
+
+ parent_names = kcalloc(num_parents, sizeof(char *), GFP_KERNEL);
+ if (!parent_names) {
+ clk = ERR_PTR(-ENOMEM);
+ goto out;
+ }
+
+ for (i = 0; i < num_parents; i++)
+ parent_names[i] = of_clk_get_parent_name(data->node, i);
+
+ clk = data->clk_register_get(data->node->name, parent_names,
+ num_parents, gpio, of_flags & OF_GPIO_ACTIVE_LOW);
+ if (IS_ERR(clk))
+ goto out;
+
+ data->clk = clk;
+out:
+ mutex_unlock(&data->lock);
+ kfree(parent_names);
+
+ return clk;
+}
+
+static struct clk *of_clk_gpio_gate_delayed_register_get(const char *name,
+ const char **parent_names, u8 num_parents,
+ unsigned gpio, bool active_low)
+{
+ return clk_register_gpio_gate(NULL, name, parent_names[0],
+ gpio, active_low, 0);
+}
+
+static struct clk *of_clk_gpio_mux_delayed_register_get(const char *name,
+ const char **parent_names, u8 num_parents, unsigned gpio,
+ bool active_low)
+{
+ return clk_register_gpio_mux(NULL, name, parent_names, num_parents,
+ gpio, active_low, 0);
+}
+
+static void __init of_gpio_clk_setup(struct device_node *node,
+ const char *gpio_name,
+ struct clk *(*clk_register_get)(const char *name,
+ const char **parent_names, u8 num_parents,
+ unsigned gpio, bool active_low))
+{
+ struct clk_gpio_delayed_register_data *data;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return;
+
+ data->node = node;
+ data->gpio_name = gpio_name;
+ data->clk_register_get = clk_register_get;
+ mutex_init(&data->lock);
+
+ of_clk_add_provider(node, of_clk_gpio_delayed_register_get, data);
+}
+
+static void __init of_gpio_gate_clk_setup(struct device_node *node)
+{
+ of_gpio_clk_setup(node, "enable-gpios",
+ of_clk_gpio_gate_delayed_register_get);
+}
+CLK_OF_DECLARE(gpio_gate_clk, "gpio-gate-clock", of_gpio_gate_clk_setup);
+
+void __init of_gpio_mux_clk_setup(struct device_node *node)
+{
+ of_gpio_clk_setup(node, "select-gpios",
+ of_clk_gpio_mux_delayed_register_get);
+}
+CLK_OF_DECLARE(gpio_mux_clk, "gpio-mux-clock", of_gpio_mux_clk_setup);
+#endif
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/err.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/of.h>
* warranty of any kind, whether express or implied.
*/
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/of_address.h>
* Simple multiplexer clock implementation
*/
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/module.h>
#include <linux/slab.h>
#define pr_fmt(fmt) "Nomadik SRC clocks: " fmt
#include <linux/bitops.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/clk-provider.h>
*/
#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/mfd/palmas.h>
#include <linux/module.h>
* more details.
*/
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/module.h>
#include <linux/slab.h>
s2mps11_name(s2mps11_clk), NULL);
if (!s2mps11_clk->lookup) {
ret = -ENOMEM;
- goto err_lup;
+ goto err_reg;
}
}
platform_set_drvdata(pdev, s2mps11_clks);
return ret;
-err_lup:
- devm_clk_unregister(&pdev->dev, s2mps11_clk->clk);
+
err_reg:
- while (s2mps11_clk > s2mps11_clks) {
- if (s2mps11_clk->lookup) {
- clkdev_drop(s2mps11_clk->lookup);
- devm_clk_unregister(&pdev->dev, s2mps11_clk->clk);
- }
- s2mps11_clk--;
- }
+ while (--i >= 0)
+ clkdev_drop(s2mps11_clks[i].lookup);
return ret;
}
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/clkdev.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/err.h>
* GNU General Public License for more details.
*/
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/module.h>
memcpy(table, stm32f42xx_gate_map, sizeof(table));
/* only bits set in table can be used as indices */
- if (WARN_ON(secondary > 8 * sizeof(table) ||
+ if (WARN_ON(secondary >= BITS_PER_BYTE * sizeof(table) ||
0 == (table[BIT_ULL_WORD(secondary)] &
BIT_ULL_MASK(secondary))))
return -EINVAL;
*
*/
-#include <linux/clk.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
clkdata->twl6040 = twl6040;
clkdata->mcpdm_fclk.init = &wm831x_clkout_init;
- clkdata->clk = clk_register(&pdev->dev, &clkdata->mcpdm_fclk);
+ clkdata->clk = devm_clk_register(&pdev->dev, &clkdata->mcpdm_fclk);
if (IS_ERR(clkdata->clk))
return PTR_ERR(clkdata->clk);
return 0;
}
-static int twl6040_clk_remove(struct platform_device *pdev)
-{
- struct twl6040_clk *clkdata = platform_get_drvdata(pdev);
-
- clk_unregister(clkdata->clk);
-
- return 0;
-}
-
static struct platform_driver twl6040_clk_driver = {
.driver = {
.name = "twl6040-clk",
},
.probe = twl6040_clk_probe,
- .remove = twl6040_clk_remove,
};
module_platform_driver(twl6040_clk_driver);
* Author: Linus Walleij <linus.walleij@stericsson.com>
* Author: Jonas Aaberg <jonas.aberg@stericsson.com>
*/
-#include <linux/clk.h>
#include <linux/clkdev.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/clk-provider.h>
*
*/
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/module.h>
struct xgene_clk_pll {
struct clk_hw hw;
- const char *name;
void __iomem *reg;
spinlock_t *lock;
u32 pll_offset;
u32 data;
data = xgene_clk_read(pllclk->reg + pllclk->pll_offset);
- pr_debug("%s pll %s\n", pllclk->name,
+ pr_debug("%s pll %s\n", __clk_get_name(hw->clk),
data & REGSPEC_RESET_F1_MASK ? "disabled" : "enabled");
return data & REGSPEC_RESET_F1_MASK ? 0 : 1;
fref = parent_rate / nref;
fvco = fref * nfb;
}
- pr_debug("%s pll recalc rate %ld parent %ld\n", pllclk->name,
+ pr_debug("%s pll recalc rate %ld parent %ld\n", __clk_get_name(hw->clk),
fvco / nout, parent_rate);
return fvco / nout;
init.parent_names = parent_name ? &parent_name : NULL;
init.num_parents = parent_name ? 1 : 0;
- apmclk->name = name;
apmclk->reg = reg;
apmclk->lock = lock;
apmclk->pll_offset = pll_offset;
struct xgene_clk {
struct clk_hw hw;
- const char *name;
spinlock_t *lock;
struct xgene_dev_parameters param;
};
spin_lock_irqsave(pclk->lock, flags);
if (pclk->param.csr_reg != NULL) {
- pr_debug("%s clock enabled\n", pclk->name);
+ pr_debug("%s clock enabled\n", __clk_get_name(hw->clk));
reg = __pa(pclk->param.csr_reg);
/* First enable the clock */
data = xgene_clk_read(pclk->param.csr_reg +
xgene_clk_write(data, pclk->param.csr_reg +
pclk->param.reg_clk_offset);
pr_debug("%s clock PADDR base %pa clk offset 0x%08X mask 0x%08X value 0x%08X\n",
- pclk->name, ®,
+ __clk_get_name(hw->clk), ®,
pclk->param.reg_clk_offset, pclk->param.reg_clk_mask,
data);
xgene_clk_write(data, pclk->param.csr_reg +
pclk->param.reg_csr_offset);
pr_debug("%s CSR RESET PADDR base %pa csr offset 0x%08X mask 0x%08X value 0x%08X\n",
- pclk->name, ®,
+ __clk_get_name(hw->clk), ®,
pclk->param.reg_csr_offset, pclk->param.reg_csr_mask,
data);
}
spin_lock_irqsave(pclk->lock, flags);
if (pclk->param.csr_reg != NULL) {
- pr_debug("%s clock disabled\n", pclk->name);
+ pr_debug("%s clock disabled\n", __clk_get_name(hw->clk));
/* First put the CSR in reset */
data = xgene_clk_read(pclk->param.csr_reg +
pclk->param.reg_csr_offset);
u32 data = 0;
if (pclk->param.csr_reg != NULL) {
- pr_debug("%s clock checking\n", pclk->name);
+ pr_debug("%s clock checking\n", __clk_get_name(hw->clk));
data = xgene_clk_read(pclk->param.csr_reg +
pclk->param.reg_clk_offset);
- pr_debug("%s clock is %s\n", pclk->name,
+ pr_debug("%s clock is %s\n", __clk_get_name(hw->clk),
data & pclk->param.reg_clk_mask ? "enabled" :
"disabled");
}
data &= (1 << pclk->param.reg_divider_width) - 1;
pr_debug("%s clock recalc rate %ld parent %ld\n",
- pclk->name, parent_rate / data, parent_rate);
+ __clk_get_name(hw->clk),
+ parent_rate / data, parent_rate);
+
return parent_rate / data;
} else {
pr_debug("%s clock recalc rate %ld parent %ld\n",
- pclk->name, parent_rate, parent_rate);
+ __clk_get_name(hw->clk), parent_rate, parent_rate);
return parent_rate;
}
}
data |= divider;
xgene_clk_write(data, pclk->param.divider_reg +
pclk->param.reg_divider_offset);
- pr_debug("%s clock set rate %ld\n", pclk->name,
+ pr_debug("%s clock set rate %ld\n", __clk_get_name(hw->clk),
parent_rate / divider_save);
} else {
divider_save = 1;
init.parent_names = parent_name ? &parent_name : NULL;
init.num_parents = parent_name ? 1 : 0;
- apmclk->name = name;
apmclk->lock = lock;
apmclk->hw.init = &init;
apmclk->param = *parameters;
* Standard functionality for the common clock API. See Documentation/clk.txt
*/
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clk/clk-conf.h>
#include <linux/module.h>
unsigned long flags;
unsigned int enable_count;
unsigned int prepare_count;
+ unsigned long min_rate;
+ unsigned long max_rate;
unsigned long accuracy;
int phase;
struct hlist_head children;
return now <= rate && now > best;
}
-static long
-clk_mux_determine_rate_flags(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_p,
+static int
+clk_mux_determine_rate_flags(struct clk_hw *hw, struct clk_rate_request *req,
unsigned long flags)
{
struct clk_core *core = hw->core, *parent, *best_parent = NULL;
- int i, num_parents;
- unsigned long parent_rate, best = 0;
+ int i, num_parents, ret;
+ unsigned long best = 0;
+ struct clk_rate_request parent_req = *req;
/* if NO_REPARENT flag set, pass through to current parent */
if (core->flags & CLK_SET_RATE_NO_REPARENT) {
parent = core->parent;
- if (core->flags & CLK_SET_RATE_PARENT)
- best = __clk_determine_rate(parent ? parent->hw : NULL,
- rate, min_rate, max_rate);
- else if (parent)
+ if (core->flags & CLK_SET_RATE_PARENT) {
+ ret = __clk_determine_rate(parent ? parent->hw : NULL,
+ &parent_req);
+ if (ret)
+ return ret;
+
+ best = parent_req.rate;
+ } else if (parent) {
best = clk_core_get_rate_nolock(parent);
- else
+ } else {
best = clk_core_get_rate_nolock(core);
+ }
+
goto out;
}
parent = clk_core_get_parent_by_index(core, i);
if (!parent)
continue;
- if (core->flags & CLK_SET_RATE_PARENT)
- parent_rate = __clk_determine_rate(parent->hw, rate,
- min_rate,
- max_rate);
- else
- parent_rate = clk_core_get_rate_nolock(parent);
- if (mux_is_better_rate(rate, parent_rate, best, flags)) {
+
+ if (core->flags & CLK_SET_RATE_PARENT) {
+ parent_req = *req;
+ ret = __clk_determine_rate(parent->hw, &parent_req);
+ if (ret)
+ continue;
+ } else {
+ parent_req.rate = clk_core_get_rate_nolock(parent);
+ }
+
+ if (mux_is_better_rate(req->rate, parent_req.rate,
+ best, flags)) {
best_parent = parent;
- best = parent_rate;
+ best = parent_req.rate;
}
}
+ if (!best_parent)
+ return -EINVAL;
+
out:
if (best_parent)
- *best_parent_p = best_parent->hw;
- *best_parent_rate = best;
+ req->best_parent_hw = best_parent->hw;
+ req->best_parent_rate = best;
+ req->rate = best;
- return best;
+ return 0;
}
struct clk *__clk_lookup(const char *name)
{
struct clk *clk_user;
- *min_rate = 0;
- *max_rate = ULONG_MAX;
+ *min_rate = core->min_rate;
+ *max_rate = core->max_rate;
hlist_for_each_entry(clk_user, &core->clks, clks_node)
*min_rate = max(*min_rate, clk_user->min_rate);
*max_rate = min(*max_rate, clk_user->max_rate);
}
+void clk_hw_set_rate_range(struct clk_hw *hw, unsigned long min_rate,
+ unsigned long max_rate)
+{
+ hw->core->min_rate = min_rate;
+ hw->core->max_rate = max_rate;
+}
+EXPORT_SYMBOL_GPL(clk_hw_set_rate_range);
+
/*
* Helper for finding best parent to provide a given frequency. This can be used
* directly as a determine_rate callback (e.g. for a mux), or from a more
* complex clock that may combine a mux with other operations.
*/
-long __clk_mux_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_p)
+int __clk_mux_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
- return clk_mux_determine_rate_flags(hw, rate, min_rate, max_rate,
- best_parent_rate,
- best_parent_p, 0);
+ return clk_mux_determine_rate_flags(hw, req, 0);
}
EXPORT_SYMBOL_GPL(__clk_mux_determine_rate);
-long __clk_mux_determine_rate_closest(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_p)
+int __clk_mux_determine_rate_closest(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
- return clk_mux_determine_rate_flags(hw, rate, min_rate, max_rate,
- best_parent_rate,
- best_parent_p,
- CLK_MUX_ROUND_CLOSEST);
+ return clk_mux_determine_rate_flags(hw, req, CLK_MUX_ROUND_CLOSEST);
}
EXPORT_SYMBOL_GPL(__clk_mux_determine_rate_closest);
}
EXPORT_SYMBOL_GPL(clk_enable);
-static unsigned long clk_core_round_rate_nolock(struct clk_core *core,
- unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate)
+static int clk_core_round_rate_nolock(struct clk_core *core,
+ struct clk_rate_request *req)
{
- unsigned long parent_rate = 0;
struct clk_core *parent;
- struct clk_hw *parent_hw;
+ long rate;
lockdep_assert_held(&prepare_lock);
return 0;
parent = core->parent;
- if (parent)
- parent_rate = parent->rate;
+ if (parent) {
+ req->best_parent_hw = parent->hw;
+ req->best_parent_rate = parent->rate;
+ } else {
+ req->best_parent_hw = NULL;
+ req->best_parent_rate = 0;
+ }
if (core->ops->determine_rate) {
- parent_hw = parent ? parent->hw : NULL;
- return core->ops->determine_rate(core->hw, rate,
- min_rate, max_rate,
- &parent_rate, &parent_hw);
- } else if (core->ops->round_rate)
- return core->ops->round_rate(core->hw, rate, &parent_rate);
- else if (core->flags & CLK_SET_RATE_PARENT)
- return clk_core_round_rate_nolock(core->parent, rate, min_rate,
- max_rate);
- else
- return core->rate;
+ return core->ops->determine_rate(core->hw, req);
+ } else if (core->ops->round_rate) {
+ rate = core->ops->round_rate(core->hw, req->rate,
+ &req->best_parent_rate);
+ if (rate < 0)
+ return rate;
+
+ req->rate = rate;
+ } else if (core->flags & CLK_SET_RATE_PARENT) {
+ return clk_core_round_rate_nolock(parent, req);
+ } else {
+ req->rate = core->rate;
+ }
+
+ return 0;
}
/**
*
* Useful for clk_ops such as .set_rate and .determine_rate.
*/
-unsigned long __clk_determine_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate)
+int __clk_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
{
- if (!hw)
+ if (!hw) {
+ req->rate = 0;
return 0;
+ }
- return clk_core_round_rate_nolock(hw->core, rate, min_rate, max_rate);
+ return clk_core_round_rate_nolock(hw->core, req);
}
EXPORT_SYMBOL_GPL(__clk_determine_rate);
*/
unsigned long __clk_round_rate(struct clk *clk, unsigned long rate)
{
- unsigned long min_rate;
- unsigned long max_rate;
+ struct clk_rate_request req;
+ int ret;
if (!clk)
return 0;
- clk_core_get_boundaries(clk->core, &min_rate, &max_rate);
+ clk_core_get_boundaries(clk->core, &req.min_rate, &req.max_rate);
+ req.rate = rate;
- return clk_core_round_rate_nolock(clk->core, rate, min_rate, max_rate);
+ ret = clk_core_round_rate_nolock(clk->core, &req);
+ if (ret)
+ return 0;
+
+ return req.rate;
}
EXPORT_SYMBOL_GPL(__clk_round_rate);
{
struct clk_core *top = core;
struct clk_core *old_parent, *parent;
- struct clk_hw *parent_hw;
unsigned long best_parent_rate = 0;
unsigned long new_rate;
unsigned long min_rate;
/* find the closest rate and parent clk/rate */
if (core->ops->determine_rate) {
- parent_hw = parent ? parent->hw : NULL;
- ret = core->ops->determine_rate(core->hw, rate,
- min_rate,
- max_rate,
- &best_parent_rate,
- &parent_hw);
+ struct clk_rate_request req;
+
+ req.rate = rate;
+ req.min_rate = min_rate;
+ req.max_rate = max_rate;
+ if (parent) {
+ req.best_parent_hw = parent->hw;
+ req.best_parent_rate = parent->rate;
+ } else {
+ req.best_parent_hw = NULL;
+ req.best_parent_rate = 0;
+ }
+
+ ret = core->ops->determine_rate(core->hw, &req);
if (ret < 0)
return NULL;
- new_rate = ret;
- parent = parent_hw ? parent_hw->core : NULL;
+ best_parent_rate = req.best_parent_rate;
+ new_rate = req.rate;
+ parent = req.best_parent_hw ? req.best_parent_hw->core : NULL;
} else if (core->ops->round_rate) {
ret = core->ops->round_rate(core->hw, rate,
- &best_parent_rate);
+ &best_parent_rate);
if (ret < 0)
return NULL;
core->hw = hw;
core->flags = hw->init->flags;
core->num_parents = hw->init->num_parents;
+ core->min_rate = 0;
+ core->max_rate = ULONG_MAX;
hw->core = core;
/* allocate local copy in case parent_names is __initdata */
struct list_head node;
};
-static LIST_HEAD(clk_provider_list);
-
/*
* This function looks for a parent clock. If there is one, then it
* checks that the provider for this parent clock was initialized, in
struct clock_provider *clk_provider, *next;
bool is_init_done;
bool force = false;
+ LIST_HEAD(clk_provider_list);
if (!matches)
matches = &__clk_of_table;
/* First prepare the list of the clocks providers */
for_each_matching_node_and_match(np, matches, &match) {
- struct clock_provider *parent =
- kzalloc(sizeof(struct clock_provider), GFP_KERNEL);
+ struct clock_provider *parent;
+
+ parent = kzalloc(sizeof(*parent), GFP_KERNEL);
+ if (!parent) {
+ list_for_each_entry_safe(clk_provider, next,
+ &clk_provider_list, node) {
+ list_del(&clk_provider->node);
+ kfree(clk_provider);
+ }
+ return;
+ }
parent->clk_init_cb = match->data;
parent->np = np;
* Copyright 2015 Yoshinori Sato <ysato@users.sourceforge.jp>
*/
-#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/of.h>
static void __init h8300_div_clk_setup(struct device_node *node)
{
- unsigned int num_parents;
+ int num_parents;
struct clk *clk;
const char *clk_name = node->name;
const char *parent_name;
* Copyright 2015 Yoshinori Sato <ysato@users.sourceforge.jp>
*/
-#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/device.h>
unsigned long parent_rate)
{
struct pll_clock *pll_clock = to_pll_clock(hw);
- int mul = 1 << (ctrl_inb((unsigned long)pll_clock->pllcr) & 3);
+ int mul = 1 << (readb(pll_clock->pllcr) & 3);
return parent_rate * mul;
}
pll = ((rate / parent_rate) / 2) & 0x03;
spin_lock_irqsave(&clklock, flags);
- val = ctrl_inb((unsigned long)pll_clock->sckcr);
+ val = readb(pll_clock->sckcr);
val |= 0x08;
- ctrl_outb(val, (unsigned long)pll_clock->sckcr);
- val = ctrl_inb((unsigned long)pll_clock->pllcr);
+ writeb(val, pll_clock->sckcr);
+ val = readb(pll_clock->pllcr);
val &= ~0x03;
val |= pll;
- ctrl_outb(val, (unsigned long)pll_clock->pllcr);
+ writeb(val, pll_clock->pllcr);
spin_unlock_irqrestore(&clklock, flags);
return 0;
}
static void __init h8s2678_pll_clk_setup(struct device_node *node)
{
- unsigned int num_parents;
+ int num_parents;
struct clk *clk;
const char *clk_name = node->name;
const char *parent_name;
}
- pll_clock = kzalloc(sizeof(struct pll_clock), GFP_KERNEL);
- if (!pll_clock) {
- pr_err("%s: failed to alloc memory", clk_name);
+ pll_clock = kzalloc(sizeof(*pll_clock), GFP_KERNEL);
+ if (!pll_clock)
return;
- }
pll_clock->sckcr = of_iomap(node, 0);
if (pll_clock->sckcr == NULL) {
#include <linux/kernel.h>
#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/slab.h>
-#include <linux/clk.h>
#include <dt-bindings/clock/hi3620-clock.h>
}
}
-static long mmc_clk_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_p)
+static int mmc_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct clk_mmc *mclk = to_mmc(hw);
- unsigned long best = 0;
- if ((rate <= 13000000) && (mclk->id == HI3620_MMC_CIUCLK1)) {
- rate = 13000000;
- best = 26000000;
- } else if (rate <= 26000000) {
- rate = 25000000;
- best = 180000000;
- } else if (rate <= 52000000) {
- rate = 50000000;
- best = 360000000;
- } else if (rate <= 100000000) {
- rate = 100000000;
- best = 720000000;
+ if ((req->rate <= 13000000) && (mclk->id == HI3620_MMC_CIUCLK1)) {
+ req->rate = 13000000;
+ req->best_parent_rate = 26000000;
+ } else if (req->rate <= 26000000) {
+ req->rate = 25000000;
+ req->best_parent_rate = 180000000;
+ } else if (req->rate <= 52000000) {
+ req->rate = 50000000;
+ req->best_parent_rate = 360000000;
+ } else if (req->rate <= 100000000) {
+ req->rate = 100000000;
+ req->best_parent_rate = 720000000;
} else {
/* max is 180M */
- rate = 180000000;
- best = 1440000000;
+ req->rate = 180000000;
+ req->best_parent_rate = 1440000000;
}
- *best_parent_rate = best;
- return rate;
+ return -EINVAL;
}
static u32 mmc_clk_delay(u32 val, u32 para, u32 off, u32 len)
#include <linux/kernel.h>
#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/slab.h>
-#include <linux/clk.h>
#include <dt-bindings/clock/hip04-clock.h>
*/
#include <linux/kernel.h>
-#include <linux/clk-provider.h>
#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/slab.h>
-#include <linux/clk.h>
#include "clk.h"
#include <linux/kernel.h>
#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
#include <linux/io.h>
#include <linux/slab.h>
-#include <linux/clk.h>
#include "clk.h"
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
*/
-#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/err.h>
* of the License, or (at your option) any later version.
*/
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/of.h>
* http://www.gnu.org/copyleft/gpl.html
*/
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/slab.h>
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/slab.h>
* http://www.gnu.org/copyleft/gpl.html
*/
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/io.h>
*/
#include <linux/bitops.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/delay.h>
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/io.h>
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/io.h>
return;
}
- parents[0] = of_clk_get_parent_name(node, 0);
- parents[1] = of_clk_get_parent_name(node, 1);
+ of_clk_parent_fill(node, parents, 2);
if (!parents[0] || !parents[1]) {
pr_err("%s: missing parent clocks\n", __func__);
return;
#define __DRV_CLK_GATE_H
#include <linux/regmap.h>
-#include <linux/clk.h>
#include <linux/clk-provider.h>
+struct clk;
+
struct mtk_clk_gate {
struct clk_hw hw;
struct regmap *regmap;
* GNU General Public License for more details.
*/
+#include <linux/clk.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/slab.h>
* GNU General Public License for more details.
*/
+#include <linux/clk.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/slab.h>
MUX(CLK_PERI_UART3_SEL, "uart3_ck_sel", uart_ck_sel_parents, 0x40c, 3, 1),
};
+static struct clk_onecell_data *mt8173_top_clk_data __initdata;
+static struct clk_onecell_data *mt8173_pll_clk_data __initdata;
+
+static void __init mtk_clk_enable_critical(void)
+{
+ if (!mt8173_top_clk_data || !mt8173_pll_clk_data)
+ return;
+
+ clk_prepare_enable(mt8173_pll_clk_data->clks[CLK_APMIXED_ARMCA15PLL]);
+ clk_prepare_enable(mt8173_pll_clk_data->clks[CLK_APMIXED_ARMCA7PLL]);
+ clk_prepare_enable(mt8173_top_clk_data->clks[CLK_TOP_MEM_SEL]);
+ clk_prepare_enable(mt8173_top_clk_data->clks[CLK_TOP_DDRPHYCFG_SEL]);
+ clk_prepare_enable(mt8173_top_clk_data->clks[CLK_TOP_CCI400_SEL]);
+ clk_prepare_enable(mt8173_top_clk_data->clks[CLK_TOP_RTC_SEL]);
+}
+
static void __init mtk_topckgen_init(struct device_node *node)
{
struct clk_onecell_data *clk_data;
return;
}
- clk_data = mtk_alloc_clk_data(CLK_TOP_NR_CLK);
+ mt8173_top_clk_data = clk_data = mtk_alloc_clk_data(CLK_TOP_NR_CLK);
mtk_clk_register_factors(root_clk_alias, ARRAY_SIZE(root_clk_alias), clk_data);
mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), clk_data);
mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes), base,
&mt8173_clk_lock, clk_data);
- clk_prepare_enable(clk_data->clks[CLK_TOP_CCI400_SEL]);
-
r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
if (r)
pr_err("%s(): could not register clock provider: %d\n",
__func__, r);
+
+ mtk_clk_enable_critical();
}
CLK_OF_DECLARE(mtk_topckgen, "mediatek,mt8173-topckgen", mtk_topckgen_init);
#define CON0_MT8173_RST_BAR BIT(24)
-#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, _pd_reg, _pd_shift, \
- _tuner_reg, _pcw_reg, _pcw_shift) { \
+#define PLL_B(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, \
+ _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, \
+ _pcw_shift, _div_table) { \
.id = _id, \
.name = _name, \
.reg = _reg, \
.tuner_reg = _tuner_reg, \
.pcw_reg = _pcw_reg, \
.pcw_shift = _pcw_shift, \
+ .div_table = _div_table, \
}
+#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, \
+ _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, \
+ _pcw_shift) \
+ PLL_B(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, \
+ _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift, \
+ NULL)
+
+static const struct mtk_pll_div_table mmpll_div_table[] = {
+ { .div = 0, .freq = MT8173_PLL_FMAX },
+ { .div = 1, .freq = 1000000000 },
+ { .div = 2, .freq = 702000000 },
+ { .div = 3, .freq = 253500000 },
+ { .div = 4, .freq = 126750000 },
+ { } /* sentinel */
+};
+
static const struct mtk_pll_data plls[] = {
PLL(CLK_APMIXED_ARMCA15PLL, "armca15pll", 0x200, 0x20c, 0x00000001, 0, 21, 0x204, 24, 0x0, 0x204, 0),
PLL(CLK_APMIXED_ARMCA7PLL, "armca7pll", 0x210, 0x21c, 0x00000001, 0, 21, 0x214, 24, 0x0, 0x214, 0),
PLL(CLK_APMIXED_MAINPLL, "mainpll", 0x220, 0x22c, 0xf0000101, HAVE_RST_BAR, 21, 0x220, 4, 0x0, 0x224, 0),
PLL(CLK_APMIXED_UNIVPLL, "univpll", 0x230, 0x23c, 0xfe000001, HAVE_RST_BAR, 7, 0x230, 4, 0x0, 0x234, 14),
- PLL(CLK_APMIXED_MMPLL, "mmpll", 0x240, 0x24c, 0x00000001, 0, 21, 0x244, 24, 0x0, 0x244, 0),
+ PLL_B(CLK_APMIXED_MMPLL, "mmpll", 0x240, 0x24c, 0x00000001, 0, 21, 0x244, 24, 0x0, 0x244, 0, mmpll_div_table),
PLL(CLK_APMIXED_MSDCPLL, "msdcpll", 0x250, 0x25c, 0x00000001, 0, 21, 0x250, 4, 0x0, 0x254, 0),
PLL(CLK_APMIXED_VENCPLL, "vencpll", 0x260, 0x26c, 0x00000001, 0, 21, 0x260, 4, 0x0, 0x264, 0),
PLL(CLK_APMIXED_TVDPLL, "tvdpll", 0x270, 0x27c, 0x00000001, 0, 21, 0x270, 4, 0x0, 0x274, 0),
{
struct clk_onecell_data *clk_data;
- clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR_CLK);
+ mt8173_pll_clk_data = clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR_CLK);
if (!clk_data)
return;
mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
- clk_prepare_enable(clk_data->clks[CLK_APMIXED_ARMCA15PLL]);
+ mtk_clk_enable_critical();
}
CLK_OF_DECLARE(mtk_apmixedsys, "mediatek,mt8173-apmixedsys",
mtk_apmixedsys_init);
#include <linux/regmap.h>
#include <linux/bitops.h>
-#include <linux/clk.h>
#include <linux/clk-provider.h>
+struct clk;
+
#define MAX_MUX_GATE_BIT 31
#define INVALID_MUX_GATE_BIT (MAX_MUX_GATE_BIT + 1)
#define HAVE_RST_BAR BIT(0)
+struct mtk_pll_div_table {
+ u32 div;
+ unsigned long freq;
+};
+
struct mtk_pll_data {
int id;
const char *name;
int pcwbits;
uint32_t pcw_reg;
int pcw_shift;
+ const struct mtk_pll_div_table *div_table;
};
void __init mtk_clk_register_plls(struct device_node *node,
static void mtk_pll_set_rate_regs(struct mtk_clk_pll *pll, u32 pcw,
int postdiv)
{
- u32 con1, pd, val;
+ u32 con1, val;
int pll_en;
- /* set postdiv */
- pd = readl(pll->pd_addr);
- pd &= ~(POSTDIV_MASK << pll->data->pd_shift);
- pd |= (ffs(postdiv) - 1) << pll->data->pd_shift;
- writel(pd, pll->pd_addr);
-
pll_en = readl(pll->base_addr + REG_CON0) & CON0_BASE_EN;
- /* set pcw */
- val = readl(pll->pcw_addr);
+ /* set postdiv */
+ val = readl(pll->pd_addr);
+ val &= ~(POSTDIV_MASK << pll->data->pd_shift);
+ val |= (ffs(postdiv) - 1) << pll->data->pd_shift;
+
+ /* postdiv and pcw need to set at the same time if on same register */
+ if (pll->pd_addr != pll->pcw_addr) {
+ writel(val, pll->pd_addr);
+ val = readl(pll->pcw_addr);
+ }
+ /* set pcw */
val &= ~GENMASK(pll->data->pcw_shift + pll->data->pcwbits - 1,
pll->data->pcw_shift);
val |= pcw << pll->data->pcw_shift;
u32 freq, u32 fin)
{
unsigned long fmin = 1000 * MHZ;
+ const struct mtk_pll_div_table *div_table = pll->data->div_table;
u64 _pcw;
u32 val;
if (freq > pll->data->fmax)
freq = pll->data->fmax;
- for (val = 0; val < 4; val++) {
+ if (div_table) {
+ if (freq > div_table[0].freq)
+ freq = div_table[0].freq;
+
+ for (val = 0; div_table[val + 1].freq != 0; val++) {
+ if (freq > div_table[val + 1].freq)
+ break;
+ }
*postdiv = 1 << val;
- if (freq * *postdiv >= fmin)
- break;
+ } else {
+ for (val = 0; val < 5; val++) {
+ *postdiv = 1 << val;
+ if ((u64)freq * *postdiv >= fmin)
+ break;
+ }
}
/* _pcw = freq * postdiv / fin * 2^pcwfbits */
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/slab.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#define MESON_CPU_CLK_CNTL1 0x00
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/mfd/syscon.h>
#include <linux/slab.h>
*/
#include <linux/kernel.h>
-#include <linux/clk.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/delay.h>
*/
#include <linux/kernel.h>
-#include <linux/clk.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/delay.h>
return ret;
}
-static long mmp_clk_mix_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk)
+static int mmp_clk_mix_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct mmp_clk_mix *mix = to_clk_mix(hw);
struct mmp_clk_mix_clk_table *item;
parent = NULL;
mix_rate_best = 0;
parent_rate_best = 0;
- gap_best = rate;
+ gap_best = ULONG_MAX;
parent_best = NULL;
if (mix->table) {
item->parent_index);
parent_rate = __clk_get_rate(parent);
mix_rate = parent_rate / item->divisor;
- gap = abs(mix_rate - rate);
+ gap = abs(mix_rate - req->rate);
if (parent_best == NULL || gap < gap_best) {
parent_best = parent;
parent_rate_best = parent_rate;
for (j = 0; j < div_val_max; j++) {
div = _get_div(mix, j);
mix_rate = parent_rate / div;
- gap = abs(mix_rate - rate);
+ gap = abs(mix_rate - req->rate);
if (parent_best == NULL || gap < gap_best) {
parent_best = parent;
parent_rate_best = parent_rate;
}
found:
- *best_parent_rate = parent_rate_best;
- *best_parent_clk = __clk_get_hw(parent_best);
+ if (!parent_best)
+ return -EINVAL;
+
+ req->best_parent_rate = parent_rate_best;
+ req->best_parent_hw = __clk_get_hw(parent_best);
+ req->rate = mix_rate_best;
- return mix_rate_best;
+ return 0;
}
static int mmp_clk_mix_set_rate_and_parent(struct clk_hw *hw,
#include <linux/io.h>
-#include <linux/clk.h>
#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
+#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_address.h>
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
-#include <linux/clkdev.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/of_address.h>
#include <linux/io.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/of.h>
* http://www.gnu.org/copyleft/gpl.html
*/
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/slab.h>
* http://www.gnu.org/copyleft/gpl.html
*/
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/io.h>
* http://www.gnu.org/copyleft/gpl.html
*/
-#include <linux/clk.h>
#include <linux/clk/mxs.h>
-#include <linux/clkdev.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/init.h>
* http://www.gnu.org/copyleft/gpl.html
*/
-#include <linux/clk.h>
#include <linux/clk/mxs.h>
#include <linux/clkdev.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/init.h>
* http://www.gnu.org/copyleft/gpl.html
*/
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/err.h>
* http://www.gnu.org/copyleft/gpl.html
*/
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/io.h>
#ifndef __MXS_CLK_H
#define __MXS_CLK_H
-#include <linux/clk.h>
+struct clk;
+
#include <linux/clk-provider.h>
#include <linux/spinlock.h>
* warranty of any kind, whether express or implied.
*/
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/kernel.h>
* version 2, as published by the Free Software Foundation.
*/
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/kernel.h>
#include <linux/of.h>
clks[3] / 1000000, (clks[3] % 1000000) / 10000);
}
- return (unsigned int)clks[0];
+ return (unsigned int)clks[0] / KHz;
}
static unsigned long clk_pxa25x_memory_get_rate(struct clk_hw *hw,
pr_info("System bus clock: %ld.%02ldMHz\n",
clks[4] / 1000000, (clks[4] % 1000000) / 10000);
}
- return (unsigned int)clks[0];
+ return (unsigned int)clks[0] / KHz;
}
bool pxa27x_is_ppll_disabled(void)
pr_info("System bus clock: %ld.%02ldMHz\n",
clks[4] / 1000000, (clks[4] % 1000000) / 10000);
}
- return (unsigned int)clks[0];
+ return (unsigned int)clks[0] / KHz;
}
static unsigned long clk_pxa3xx_ac97_get_rate(struct clk_hw *hw,
return NULL;
}
-static long
-clk_pll_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate, unsigned long max_rate,
- unsigned long *p_rate, struct clk_hw **p)
+static int
+clk_pll_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
{
+ struct clk *parent = __clk_get_parent(hw->clk);
struct clk_pll *pll = to_clk_pll(hw);
const struct pll_freq_tbl *f;
- f = find_freq(pll->freq_tbl, rate);
+ req->best_parent_hw = __clk_get_hw(parent);
+ req->best_parent_rate = __clk_get_rate(parent);
+
+ f = find_freq(pll->freq_tbl, req->rate);
if (!f)
- return clk_pll_recalc_rate(hw, *p_rate);
+ req->rate = clk_pll_recalc_rate(hw, req->best_parent_rate);
+ else
+ req->rate = f->freq;
- return f->freq;
+ return 0;
}
static int
clk_pll_set_fsm_mode(pll, regmap, 0);
}
EXPORT_SYMBOL_GPL(clk_pll_configure_sr_hpm_lp);
+
+static int clk_pll_sr2_enable(struct clk_hw *hw)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ int ret;
+ u32 mode;
+
+ ret = regmap_read(pll->clkr.regmap, pll->mode_reg, &mode);
+ if (ret)
+ return ret;
+
+ /* Disable PLL bypass mode. */
+ ret = regmap_update_bits(pll->clkr.regmap, pll->mode_reg, PLL_BYPASSNL,
+ PLL_BYPASSNL);
+ if (ret)
+ return ret;
+
+ /*
+ * H/W requires a 5us delay between disabling the bypass and
+ * de-asserting the reset. Delay 10us just to be safe.
+ */
+ udelay(10);
+
+ /* De-assert active-low PLL reset. */
+ ret = regmap_update_bits(pll->clkr.regmap, pll->mode_reg, PLL_RESET_N,
+ PLL_RESET_N);
+ if (ret)
+ return ret;
+
+ ret = wait_for_pll(pll);
+ if (ret)
+ return ret;
+
+ /* Enable PLL output. */
+ return regmap_update_bits(pll->clkr.regmap, pll->mode_reg, PLL_OUTCTRL,
+ PLL_OUTCTRL);
+}
+
+static int
+clk_pll_sr2_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long prate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ const struct pll_freq_tbl *f;
+ bool enabled;
+ u32 mode;
+ u32 enable_mask = PLL_OUTCTRL | PLL_BYPASSNL | PLL_RESET_N;
+
+ f = find_freq(pll->freq_tbl, rate);
+ if (!f)
+ return -EINVAL;
+
+ regmap_read(pll->clkr.regmap, pll->mode_reg, &mode);
+ enabled = (mode & enable_mask) == enable_mask;
+
+ if (enabled)
+ clk_pll_disable(hw);
+
+ regmap_update_bits(pll->clkr.regmap, pll->l_reg, 0x3ff, f->l);
+ regmap_update_bits(pll->clkr.regmap, pll->m_reg, 0x7ffff, f->m);
+ regmap_update_bits(pll->clkr.regmap, pll->n_reg, 0x7ffff, f->n);
+
+ if (enabled)
+ clk_pll_sr2_enable(hw);
+
+ return 0;
+}
+
+const struct clk_ops clk_pll_sr2_ops = {
+ .enable = clk_pll_sr2_enable,
+ .disable = clk_pll_disable,
+ .set_rate = clk_pll_sr2_set_rate,
+ .recalc_rate = clk_pll_recalc_rate,
+ .determine_rate = clk_pll_determine_rate,
+};
+EXPORT_SYMBOL_GPL(clk_pll_sr2_ops);
extern const struct clk_ops clk_pll_ops;
extern const struct clk_ops clk_pll_vote_ops;
+extern const struct clk_ops clk_pll_sr2_ops;
#define to_clk_pll(_hw) container_of(to_clk_regmap(_hw), struct clk_pll, clkr)
return calc_rate(parent_rate, m, n, mode, pre_div);
}
-static long _freq_tbl_determine_rate(struct clk_hw *hw,
- const struct freq_tbl *f, unsigned long rate,
- unsigned long min_rate, unsigned long max_rate,
- unsigned long *p_rate, struct clk_hw **p_hw,
+static int _freq_tbl_determine_rate(struct clk_hw *hw, const struct freq_tbl *f,
+ struct clk_rate_request *req,
const struct parent_map *parent_map)
{
- unsigned long clk_flags;
+ unsigned long clk_flags, rate = req->rate;
struct clk *p;
int index;
} else {
rate = __clk_get_rate(p);
}
- *p_hw = __clk_get_hw(p);
- *p_rate = rate;
+ req->best_parent_hw = __clk_get_hw(p);
+ req->best_parent_rate = rate;
+ req->rate = f->freq;
- return f->freq;
+ return 0;
}
-static long clk_rcg_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate, unsigned long max_rate,
- unsigned long *p_rate, struct clk_hw **p)
+static int clk_rcg_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct clk_rcg *rcg = to_clk_rcg(hw);
- return _freq_tbl_determine_rate(hw, rcg->freq_tbl, rate, min_rate,
- max_rate, p_rate, p, rcg->s.parent_map);
+ return _freq_tbl_determine_rate(hw, rcg->freq_tbl, req,
+ rcg->s.parent_map);
}
-static long clk_dyn_rcg_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate, unsigned long max_rate,
- unsigned long *p_rate, struct clk_hw **p)
+static int clk_dyn_rcg_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct clk_dyn_rcg *rcg = to_clk_dyn_rcg(hw);
u32 reg;
bank = reg_to_bank(rcg, reg);
s = &rcg->s[bank];
- return _freq_tbl_determine_rate(hw, rcg->freq_tbl, rate, min_rate,
- max_rate, p_rate, p, s->parent_map);
+ return _freq_tbl_determine_rate(hw, rcg->freq_tbl, req, s->parent_map);
}
-static long clk_rcg_bypass_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate, unsigned long max_rate,
- unsigned long *p_rate, struct clk_hw **p_hw)
+static int clk_rcg_bypass_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct clk_rcg *rcg = to_clk_rcg(hw);
const struct freq_tbl *f = rcg->freq_tbl;
int index = qcom_find_src_index(hw, rcg->s.parent_map, f->src);
p = clk_get_parent_by_index(hw->clk, index);
- *p_hw = __clk_get_hw(p);
- *p_rate = __clk_round_rate(p, rate);
+ req->best_parent_hw = __clk_get_hw(p);
+ req->best_parent_rate = __clk_round_rate(p, req->rate);
+ req->rate = req->best_parent_rate;
- return *p_rate;
+ return 0;
}
static int __clk_rcg_set_rate(struct clk_rcg *rcg, const struct freq_tbl *f)
return calc_rate(parent_rate, m, n, mode, hid_div);
}
-static long _freq_tbl_determine_rate(struct clk_hw *hw,
- const struct freq_tbl *f, unsigned long rate,
- unsigned long *p_rate, struct clk_hw **p_hw)
+static int _freq_tbl_determine_rate(struct clk_hw *hw,
+ const struct freq_tbl *f, struct clk_rate_request *req)
{
- unsigned long clk_flags;
+ unsigned long clk_flags, rate = req->rate;
struct clk *p;
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
int index;
} else {
rate = __clk_get_rate(p);
}
- *p_hw = __clk_get_hw(p);
- *p_rate = rate;
+ req->best_parent_hw = __clk_get_hw(p);
+ req->best_parent_rate = rate;
+ req->rate = f->freq;
- return f->freq;
+ return 0;
}
-static long clk_rcg2_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate, unsigned long max_rate,
- unsigned long *p_rate, struct clk_hw **p)
+static int clk_rcg2_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
- return _freq_tbl_determine_rate(hw, rcg->freq_tbl, rate, p_rate, p);
+ return _freq_tbl_determine_rate(hw, rcg->freq_tbl, req);
}
static int clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f)
return clk_edp_pixel_set_rate(hw, rate, parent_rate);
}
-static long clk_edp_pixel_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *p_rate, struct clk_hw **p)
+static int clk_edp_pixel_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
const struct freq_tbl *f = rcg->freq_tbl;
const struct frac_entry *frac;
int delta = 100000;
- s64 src_rate = *p_rate;
s64 request;
u32 mask = BIT(rcg->hid_width) - 1;
u32 hid_div;
int index = qcom_find_src_index(hw, rcg->parent_map, f->src);
+ struct clk *p = clk_get_parent_by_index(hw->clk, index);
/* Force the correct parent */
- *p = __clk_get_hw(clk_get_parent_by_index(hw->clk, index));
+ req->best_parent_hw = __clk_get_hw(p);
+ req->best_parent_rate = __clk_get_rate(p);
- if (src_rate == 810000000)
+ if (req->best_parent_rate == 810000000)
frac = frac_table_810m;
else
frac = frac_table_675m;
for (; frac->num; frac++) {
- request = rate;
+ request = req->rate;
request *= frac->den;
request = div_s64(request, frac->num);
- if ((src_rate < (request - delta)) ||
- (src_rate > (request + delta)))
+ if ((req->best_parent_rate < (request - delta)) ||
+ (req->best_parent_rate > (request + delta)))
continue;
regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG,
hid_div >>= CFG_SRC_DIV_SHIFT;
hid_div &= mask;
- return calc_rate(src_rate, frac->num, frac->den, !!frac->den,
- hid_div);
+ req->rate = calc_rate(req->best_parent_rate,
+ frac->num, frac->den,
+ !!frac->den, hid_div);
+ return 0;
}
return -EINVAL;
};
EXPORT_SYMBOL_GPL(clk_edp_pixel_ops);
-static long clk_byte_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate, unsigned long max_rate,
- unsigned long *p_rate, struct clk_hw **p_hw)
+static int clk_byte_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
const struct freq_tbl *f = rcg->freq_tbl;
u32 mask = BIT(rcg->hid_width) - 1;
struct clk *p;
- if (rate == 0)
+ if (req->rate == 0)
return -EINVAL;
p = clk_get_parent_by_index(hw->clk, index);
- *p_hw = __clk_get_hw(p);
- *p_rate = parent_rate = __clk_round_rate(p, rate);
+ req->best_parent_hw = __clk_get_hw(p);
+ req->best_parent_rate = parent_rate = __clk_round_rate(p, req->rate);
- div = DIV_ROUND_UP((2 * parent_rate), rate) - 1;
+ div = DIV_ROUND_UP((2 * parent_rate), req->rate) - 1;
div = min_t(u32, div, mask);
- return calc_rate(parent_rate, 0, 0, 0, div);
+ req->rate = calc_rate(parent_rate, 0, 0, 0, div);
+
+ return 0;
}
static int clk_byte_set_rate(struct clk_hw *hw, unsigned long rate,
{ }
};
-static long clk_pixel_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *p_rate, struct clk_hw **p)
+static int clk_pixel_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
unsigned long request, src_rate;
int index = qcom_find_src_index(hw, rcg->parent_map, f->src);
struct clk *parent = clk_get_parent_by_index(hw->clk, index);
- *p = __clk_get_hw(parent);
+ req->best_parent_hw = __clk_get_hw(parent);
for (; frac->num; frac++) {
- request = (rate * frac->den) / frac->num;
+ request = (req->rate * frac->den) / frac->num;
src_rate = __clk_round_rate(parent, request);
if ((src_rate < (request - delta)) ||
(src_rate > (request + delta)))
continue;
- *p_rate = src_rate;
- return (src_rate * frac->num) / frac->den;
+ req->best_parent_rate = src_rate;
+ req->rate = (src_rate * frac->num) / frac->den;
+ return 0;
}
return -EINVAL;
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
struct freq_tbl f = *rcg->freq_tbl;
const struct frac_entry *frac = frac_table_pixel;
- unsigned long request, src_rate;
+ unsigned long request;
int delta = 100000;
u32 mask = BIT(rcg->hid_width) - 1;
u32 hid_div;
- int index = qcom_find_src_index(hw, rcg->parent_map, f.src);
- struct clk *parent = clk_get_parent_by_index(hw->clk, index);
for (; frac->num; frac++) {
request = (rate * frac->den) / frac->num;
- src_rate = __clk_round_rate(parent, request);
- if ((src_rate < (request - delta)) ||
- (src_rate > (request + delta)))
+ if ((parent_rate < (request - delta)) ||
+ (parent_rate > (request + delta)))
continue;
regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG,
{ P_GPLL0, 1 }
};
-static const char *gcc_xo_gpll0[] = {
+static const char * const gcc_xo_gpll0[] = {
"xo",
"gpll0_vote",
};
{ P_GPLL4, 5 }
};
-static const char *gcc_xo_gpll0_gpll4[] = {
+static const char * const gcc_xo_gpll0_gpll4[] = {
"xo",
"gpll0_vote",
"gpll4_vote",
{ P_SATA_ASIC0_CLK, 2 }
};
-static const char *gcc_xo_sata_asic0[] = {
+static const char * const gcc_xo_sata_asic0[] = {
"xo",
"sata_asic0_clk",
};
{ P_SATA_RX_CLK, 2}
};
-static const char *gcc_xo_sata_rx[] = {
+static const char * const gcc_xo_sata_rx[] = {
"xo",
"sata_rx_clk",
};
{ P_PCIE_0_1_PIPE_CLK, 2 }
};
-static const char *gcc_xo_pcie[] = {
+static const char * const gcc_xo_pcie[] = {
"xo",
"pcie_pipe",
};
{ P_SLEEP_CLK, 6 }
};
-static const char *gcc_xo_pcie_sleep[] = {
+static const char * const gcc_xo_pcie_sleep[] = {
"xo",
"sleep_clk_src",
};
"ce1_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
{ P_PLL8, 3 }
};
-static const char *gcc_pxo_pll8[] = {
+static const char * const gcc_pxo_pll8[] = {
"pxo",
"pll8_vote",
};
{ P_CXO, 5 }
};
-static const char *gcc_pxo_pll8_cxo[] = {
+static const char * const gcc_pxo_pll8_cxo[] = {
"pxo",
"pll8_vote",
"cxo",
{ P_PLL3, 6 }
};
-static const char *gcc_pxo_pll3[] = {
+static const char * const gcc_pxo_pll3[] = {
"pxo",
"pll3",
};
{ P_PLL0, 2 }
};
-static const char *gcc_pxo_pll8_pll0_map[] = {
+static const char * const gcc_pxo_pll8_pll0_map[] = {
"pxo",
"pll8_vote",
"pll0_vote",
{ P_PLL18, 1 }
};
-static const char *gcc_pxo_pll8_pll14_pll18_pll0[] = {
+static const char * const gcc_pxo_pll8_pll14_pll18_pll0[] = {
"pxo",
"pll8_vote",
"pll0_vote",
{ P_PLL8, 3 }
};
-static const char *gcc_pxo_pll8[] = {
+static const char * const gcc_pxo_pll8[] = {
"pxo",
"pll8_vote",
};
{ P_CXO, 5 }
};
-static const char *gcc_pxo_pll8_cxo[] = {
+static const char * const gcc_pxo_pll8_cxo[] = {
"pxo",
"pll8_vote",
"cxo",
}
};
-static const char *usb_fs1_xcvr_fs_src_p[] = { "usb_fs1_xcvr_fs_src" };
+static const char * const usb_fs1_xcvr_fs_src_p[] = { "usb_fs1_xcvr_fs_src" };
static struct clk_branch usb_fs1_xcvr_fs_clk = {
.halt_reg = 0x2fcc,
}
};
-static const char *usb_fs2_xcvr_fs_src_p[] = { "usb_fs2_xcvr_fs_src" };
+static const char * const usb_fs2_xcvr_fs_src_p[] = { "usb_fs2_xcvr_fs_src" };
static struct clk_branch usb_fs2_xcvr_fs_clk = {
.halt_reg = 0x2fcc,
{ P_GPLL0, 1 },
};
-static const char *gcc_xo_gpll0[] = {
+static const char * const gcc_xo_gpll0[] = {
"xo",
"gpll0_vote",
};
{ P_BIMC, 2 },
};
-static const char *gcc_xo_gpll0_bimc[] = {
+static const char * const gcc_xo_gpll0_bimc[] = {
"xo",
"gpll0_vote",
"bimc_pll_vote",
{ P_GPLL2_AUX, 2 },
};
-static const char *gcc_xo_gpll0a_gpll1_gpll2a[] = {
+static const char * const gcc_xo_gpll0a_gpll1_gpll2a[] = {
"xo",
"gpll0_vote",
"gpll1_vote",
{ P_GPLL2, 2 },
};
-static const char *gcc_xo_gpll0_gpll2[] = {
+static const char * const gcc_xo_gpll0_gpll2[] = {
"xo",
"gpll0_vote",
"gpll2_vote",
{ P_GPLL0_AUX, 2 },
};
-static const char *gcc_xo_gpll0a[] = {
+static const char * const gcc_xo_gpll0a[] = {
"xo",
"gpll0_vote",
};
{ P_SLEEP_CLK, 6 },
};
-static const char *gcc_xo_gpll0_gpll1a_sleep[] = {
+static const char * const gcc_xo_gpll0_gpll1a_sleep[] = {
"xo",
"gpll0_vote",
"gpll1_vote",
{ P_GPLL1_AUX, 2 },
};
-static const char *gcc_xo_gpll0_gpll1a[] = {
+static const char * const gcc_xo_gpll0_gpll1a[] = {
"xo",
"gpll0_vote",
"gpll1_vote",
{ P_DSI0_PHYPLL_BYTE, 2 },
};
-static const char *gcc_xo_dsibyte[] = {
+static const char * const gcc_xo_dsibyte[] = {
"xo",
"dsi0pllbyte",
};
{ P_DSI0_PHYPLL_BYTE, 1 },
};
-static const char *gcc_xo_gpll0a_dsibyte[] = {
+static const char * const gcc_xo_gpll0a_dsibyte[] = {
"xo",
"gpll0_vote",
"dsi0pllbyte",
{ P_DSI0_PHYPLL_DSI, 2 },
};
-static const char *gcc_xo_gpll0_dsiphy[] = {
+static const char * const gcc_xo_gpll0_dsiphy[] = {
"xo",
"gpll0_vote",
"dsi0pll",
{ P_DSI0_PHYPLL_DSI, 1 },
};
-static const char *gcc_xo_gpll0a_dsiphy[] = {
+static const char * const gcc_xo_gpll0a_dsiphy[] = {
"xo",
"gpll0_vote",
"dsi0pll",
{ P_GPLL2, 2 },
};
-static const char *gcc_xo_gpll0a_gpll1_gpll2[] = {
+static const char * const gcc_xo_gpll0a_gpll1_gpll2[] = {
"xo",
"gpll0_vote",
"gpll1_vote",
{ P_PLL8, 3 }
};
-static const char *gcc_pxo_pll8[] = {
+static const char * const gcc_pxo_pll8[] = {
"pxo",
"pll8_vote",
};
{ P_CXO, 5 }
};
-static const char *gcc_pxo_pll8_cxo[] = {
+static const char * const gcc_pxo_pll8_cxo[] = {
"pxo",
"pll8_vote",
"cxo",
{ P_PLL3, 6 }
};
-static const char *gcc_pxo_pll8_pll3[] = {
+static const char * const gcc_pxo_pll8_pll3[] = {
"pxo",
"pll8_vote",
"pll3",
}
};
-static const char *usb_hsic_xcvr_fs_src_p[] = { "usb_hsic_xcvr_fs_src" };
+static const char * const usb_hsic_xcvr_fs_src_p[] = { "usb_hsic_xcvr_fs_src" };
static struct clk_branch usb_hsic_xcvr_fs_clk = {
.halt_reg = 0x2fc8,
}
};
-static const char *usb_fs1_xcvr_fs_src_p[] = { "usb_fs1_xcvr_fs_src" };
+static const char * const usb_fs1_xcvr_fs_src_p[] = { "usb_fs1_xcvr_fs_src" };
static struct clk_branch usb_fs1_xcvr_fs_clk = {
.halt_reg = 0x2fcc,
}
};
-static const char *usb_fs2_xcvr_fs_src_p[] = { "usb_fs2_xcvr_fs_src" };
+static const char * const usb_fs2_xcvr_fs_src_p[] = { "usb_fs2_xcvr_fs_src" };
static struct clk_branch usb_fs2_xcvr_fs_clk = {
.halt_reg = 0x2fcc,
{ P_GPLL0, 1 }
};
-static const char *gcc_xo_gpll0[] = {
+static const char * const gcc_xo_gpll0[] = {
"xo",
"gpll0_vote",
};
{ P_GPLL4, 5 }
};
-static const char *gcc_xo_gpll0_gpll4[] = {
+static const char * const gcc_xo_gpll0_gpll4[] = {
"xo",
"gpll0_vote",
"gpll4_vote",
"ce1_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
{ P_PLL4, 2 }
};
-static const char *lcc_pxo_pll4[] = {
+static const char * const lcc_pxo_pll4[] = {
"pxo",
"pll4_vote",
};
},
};
-static const char *lcc_mi2s_parents[] = {
+static const char * const lcc_mi2s_parents[] = {
"mi2s_osr_src",
};
},
};
-static const char *lcc_spdif_parents[] = {
+static const char * const lcc_spdif_parents[] = {
"spdif_src",
};
{ P_PLL4, 2 }
};
-static const char *lcc_pxo_pll4[] = {
+static const char * const lcc_pxo_pll4[] = {
"pxo",
"pll4_vote",
};
},
};
-static const char *lcc_mi2s_parents[] = {
+static const char * const lcc_mi2s_parents[] = {
"mi2s_osr_src",
};
}, \
}; \
\
-static const char *lcc_##prefix##_parents[] = { \
+static const char * const lcc_##prefix##_parents[] = { \
#prefix "_osr_src", \
}; \
\
},
};
-static const char *lcc_slimbus_parents[] = {
+static const char * const lcc_slimbus_parents[] = {
"slimbus_src",
};
{ P_GPLL0, 5 }
};
-static const char *mmcc_xo_mmpll0_mmpll1_gpll0[] = {
+static const char * const mmcc_xo_mmpll0_mmpll1_gpll0[] = {
"xo",
"mmpll0_vote",
"mmpll1_vote",
{ P_DSI1PLL, 3 }
};
-static const char *mmcc_xo_mmpll0_dsi_hdmi_gpll0[] = {
+static const char * const mmcc_xo_mmpll0_dsi_hdmi_gpll0[] = {
"xo",
"mmpll0_vote",
"hdmipll",
{ P_MMPLL2, 3 }
};
-static const char *mmcc_xo_mmpll0_1_2_gpll0[] = {
+static const char * const mmcc_xo_mmpll0_1_2_gpll0[] = {
"xo",
"mmpll0_vote",
"mmpll1_vote",
{ P_MMPLL3, 3 }
};
-static const char *mmcc_xo_mmpll0_1_3_gpll0[] = {
+static const char * const mmcc_xo_mmpll0_1_3_gpll0[] = {
"xo",
"mmpll0_vote",
"mmpll1_vote",
{ P_DSI1PLL, 2 }
};
-static const char *mmcc_xo_dsi_hdmi_edp[] = {
+static const char * const mmcc_xo_dsi_hdmi_edp[] = {
"xo",
"edp_link_clk",
"hdmipll",
{ P_DSI1PLL, 2 }
};
-static const char *mmcc_xo_dsi_hdmi_edp_gpll0[] = {
+static const char * const mmcc_xo_dsi_hdmi_edp_gpll0[] = {
"xo",
"edp_link_clk",
"hdmipll",
{ P_DSI1PLL_BYTE, 2 }
};
-static const char *mmcc_xo_dsibyte_hdmi_edp_gpll0[] = {
+static const char * const mmcc_xo_dsibyte_hdmi_edp_gpll0[] = {
"xo",
"edp_link_clk",
"hdmipll",
{ P_MMPLL4, 3 }
};
-static const char *mmcc_xo_mmpll0_1_4_gpll0[] = {
+static const char * const mmcc_xo_mmpll0_1_4_gpll0[] = {
"xo",
"mmpll0",
"mmpll1",
{ P_GPLL1, 4 }
};
-static const char *mmcc_xo_mmpll0_1_4_gpll1_0[] = {
+static const char * const mmcc_xo_mmpll0_1_4_gpll1_0[] = {
"xo",
"mmpll0",
"mmpll1",
{ P_MMSLEEP, 6 }
};
-static const char *mmcc_xo_mmpll0_1_4_gpll1_0_sleep[] = {
+static const char * const mmcc_xo_mmpll0_1_4_gpll1_0_sleep[] = {
"xo",
"mmpll0",
"mmpll1",
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/regmap.h>
#include <linux/reset-controller.h>
{ P_PLL2, 1 }
};
-static const char *mmcc_pxo_pll8_pll2[] = {
+static const char * const mmcc_pxo_pll8_pll2[] = {
"pxo",
"pll8_vote",
"pll2",
{ P_PLL3, 3 }
};
-static const char *mmcc_pxo_pll8_pll2_pll15[] = {
+static const char * const mmcc_pxo_pll8_pll2_pll15[] = {
"pxo",
"pll8_vote",
"pll2",
{ P_PLL15, 3 }
};
-static const char *mmcc_pxo_pll8_pll2_pll3[] = {
+static const char * const mmcc_pxo_pll8_pll2_pll3[] = {
"pxo",
"pll8_vote",
"pll2",
.determine_rate = __clk_mux_determine_rate,
};
-static const char *pix_rdi_parents[] = {
+static const char * const pix_rdi_parents[] = {
"csi0_clk",
"csi1_clk",
"csi2_clk",
},
};
-static const char *csixphy_timer_src[] = { "csiphytimer_src" };
+static const char * const csixphy_timer_src[] = { "csiphytimer_src" };
static struct clk_branch csiphy0_timer_clk = {
.halt_reg = 0x01e8,
{ P_HDMI_PLL, 3 }
};
-static const char *mmcc_pxo_hdmi[] = {
+static const char * const mmcc_pxo_hdmi[] = {
"pxo",
"hdmi_pll",
};
},
};
-static const char *tv_src_name[] = { "tv_src" };
+static const char * const tv_src_name[] = { "tv_src" };
static struct clk_branch tv_enc_clk = {
.halt_reg = 0x01d4,
{ P_GPLL0, 5 }
};
-static const char *mmcc_xo_mmpll0_mmpll1_gpll0[] = {
+static const char * const mmcc_xo_mmpll0_mmpll1_gpll0[] = {
"xo",
"mmpll0_vote",
"mmpll1_vote",
{ P_DSI1PLL, 3 }
};
-static const char *mmcc_xo_mmpll0_dsi_hdmi_gpll0[] = {
+static const char * const mmcc_xo_mmpll0_dsi_hdmi_gpll0[] = {
"xo",
"mmpll0_vote",
"hdmipll",
{ P_MMPLL2, 3 }
};
-static const char *mmcc_xo_mmpll0_1_2_gpll0[] = {
+static const char * const mmcc_xo_mmpll0_1_2_gpll0[] = {
"xo",
"mmpll0_vote",
"mmpll1_vote",
{ P_MMPLL3, 3 }
};
-static const char *mmcc_xo_mmpll0_1_3_gpll0[] = {
+static const char * const mmcc_xo_mmpll0_1_3_gpll0[] = {
"xo",
"mmpll0_vote",
"mmpll1_vote",
{ P_GPLL1, 4 }
};
-static const char *mmcc_xo_mmpll0_1_gpll1_0[] = {
+static const char * const mmcc_xo_mmpll0_1_gpll1_0[] = {
"xo",
"mmpll0_vote",
"mmpll1_vote",
{ P_DSI1PLL, 2 }
};
-static const char *mmcc_xo_dsi_hdmi_edp[] = {
+static const char * const mmcc_xo_dsi_hdmi_edp[] = {
"xo",
"edp_link_clk",
"hdmipll",
{ P_DSI1PLL, 2 }
};
-static const char *mmcc_xo_dsi_hdmi_edp_gpll0[] = {
+static const char * const mmcc_xo_dsi_hdmi_edp_gpll0[] = {
"xo",
"edp_link_clk",
"hdmipll",
{ P_DSI1PLL_BYTE, 2 }
};
-static const char *mmcc_xo_dsibyte_hdmi_edp_gpll0[] = {
+static const char * const mmcc_xo_dsibyte_hdmi_edp_gpll0[] = {
"xo",
"edp_link_clk",
"hdmipll",
obj-y += clk.o
obj-y += clk-pll.o
obj-y += clk-cpu.o
+obj-y += clk-inverter.o
obj-y += clk-mmc-phase.o
obj-$(CONFIG_RESET_CONTROLLER) += softrst.o
obj-y += clk-rk3188.o
obj-y += clk-rk3288.o
+obj-y += clk-rk3368.o
#include <linux/of.h>
#include <linux/slab.h>
#include <linux/io.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include "clk.h"
--- /dev/null
+/*
+ * Copyright 2015 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/slab.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include "clk.h"
+
+struct rockchip_inv_clock {
+ struct clk_hw hw;
+ void __iomem *reg;
+ int shift;
+ int flags;
+ spinlock_t *lock;
+};
+
+#define to_inv_clock(_hw) container_of(_hw, struct rockchip_inv_clock, hw)
+
+#define INVERTER_MASK 0x1
+
+static int rockchip_inv_get_phase(struct clk_hw *hw)
+{
+ struct rockchip_inv_clock *inv_clock = to_inv_clock(hw);
+ u32 val;
+
+ val = readl(inv_clock->reg) >> inv_clock->shift;
+ val &= INVERTER_MASK;
+ return val ? 180 : 0;
+}
+
+static int rockchip_inv_set_phase(struct clk_hw *hw, int degrees)
+{
+ struct rockchip_inv_clock *inv_clock = to_inv_clock(hw);
+ u32 val;
+
+ if (degrees % 180 == 0) {
+ val = !!degrees;
+ } else {
+ pr_err("%s: unsupported phase %d for %s\n",
+ __func__, degrees, __clk_get_name(hw->clk));
+ return -EINVAL;
+ }
+
+ if (inv_clock->flags & ROCKCHIP_INVERTER_HIWORD_MASK) {
+ writel(HIWORD_UPDATE(val, INVERTER_MASK, inv_clock->shift),
+ inv_clock->reg);
+ } else {
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(inv_clock->lock, flags);
+
+ reg = readl(inv_clock->reg);
+ reg &= ~BIT(inv_clock->shift);
+ reg |= val;
+ writel(reg, inv_clock->reg);
+
+ spin_unlock_irqrestore(inv_clock->lock, flags);
+ }
+
+ return 0;
+}
+
+static const struct clk_ops rockchip_inv_clk_ops = {
+ .get_phase = rockchip_inv_get_phase,
+ .set_phase = rockchip_inv_set_phase,
+};
+
+struct clk *rockchip_clk_register_inverter(const char *name,
+ const char *const *parent_names, u8 num_parents,
+ void __iomem *reg, int shift, int flags,
+ spinlock_t *lock)
+{
+ struct clk_init_data init;
+ struct rockchip_inv_clock *inv_clock;
+ struct clk *clk;
+
+ inv_clock = kmalloc(sizeof(*inv_clock), GFP_KERNEL);
+ if (!inv_clock)
+ return NULL;
+
+ init.name = name;
+ init.num_parents = num_parents;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = parent_names;
+ init.ops = &rockchip_inv_clk_ops;
+
+ inv_clock->hw.init = &init;
+ inv_clock->reg = reg;
+ inv_clock->shift = shift;
+ inv_clock->flags = flags;
+ inv_clock->lock = lock;
+
+ clk = clk_register(NULL, &inv_clock->hw);
+ if (IS_ERR(clk))
+ goto err_free;
+
+ return clk;
+
+err_free:
+ kfree(inv_clock);
+ return NULL;
+}
*/
#include <linux/slab.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
#include "clk.h"
struct rockchip_mmc_clock {
if (!mmc_clock)
return NULL;
+ init.name = name;
init.num_parents = num_parents;
init.parent_names = parent_names;
init.ops = &rockchip_mmc_clk_ops;
mmc_clock->reg = reg;
mmc_clock->shift = shift;
- if (name)
- init.name = name;
-
clk = clk_register(NULL, &mmc_clock->hw);
if (IS_ERR(clk))
goto err_free;
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/delay.h>
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/regmap.h>
#include "clk.h"
#define RK3066_PLLCON0_NR_SHIFT 8
#define RK3066_PLLCON1_NF_MASK 0x1fff
#define RK3066_PLLCON1_NF_SHIFT 0
-#define RK3066_PLLCON2_BWADJ_MASK 0xfff
-#define RK3066_PLLCON2_BWADJ_SHIFT 0
+#define RK3066_PLLCON2_NB_MASK 0xfff
+#define RK3066_PLLCON2_NB_SHIFT 0
#define RK3066_PLLCON3_RESET (1 << 5)
#define RK3066_PLLCON3_PWRDOWN (1 << 1)
#define RK3066_PLLCON3_BYPASS (1 << 0)
writel_relaxed(HIWORD_UPDATE(rate->nf - 1, RK3066_PLLCON1_NF_MASK,
RK3066_PLLCON1_NF_SHIFT),
pll->reg_base + RK3066_PLLCON(1));
- writel_relaxed(HIWORD_UPDATE(rate->bwadj, RK3066_PLLCON2_BWADJ_MASK,
- RK3066_PLLCON2_BWADJ_SHIFT),
+ writel_relaxed(HIWORD_UPDATE(rate->nb - 1, RK3066_PLLCON2_NB_MASK,
+ RK3066_PLLCON2_NB_SHIFT),
pll->reg_base + RK3066_PLLCON(2));
/* leave reset and wait the reset_delay */
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
const struct rockchip_pll_rate_table *rate;
- unsigned int nf, nr, no, bwadj;
+ unsigned int nf, nr, no, nb;
unsigned long drate;
u32 pllcon;
nf = ((pllcon >> RK3066_PLLCON1_NF_SHIFT) & RK3066_PLLCON1_NF_MASK) + 1;
pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(2));
- bwadj = (pllcon >> RK3066_PLLCON2_BWADJ_SHIFT) & RK3066_PLLCON2_BWADJ_MASK;
+ nb = ((pllcon >> RK3066_PLLCON2_NB_SHIFT) & RK3066_PLLCON2_NB_MASK) + 1;
- pr_debug("%s: pll %s@%lu: nr (%d:%d); no (%d:%d); nf(%d:%d), bwadj(%d:%d)\n",
+ pr_debug("%s: pll %s@%lu: nr (%d:%d); no (%d:%d); nf(%d:%d), nb(%d:%d)\n",
__func__, __clk_get_name(hw->clk), drate, rate->nr, nr,
- rate->no, no, rate->nf, nf, rate->bwadj, bwadj);
+ rate->no, no, rate->nf, nf, rate->nb, nb);
if (rate->nr != nr || rate->no != no || rate->nf != nf
- || rate->bwadj != bwadj) {
+ || rate->nb != nb) {
struct clk *parent = __clk_get_parent(hw->clk);
unsigned long prate;
* GNU General Public License for more details.
*/
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
#define MFLAGS CLK_MUX_HIWORD_MASK
#define DFLAGS CLK_DIVIDER_HIWORD_MASK
#define GFLAGS (CLK_GATE_HIWORD_MASK | CLK_GATE_SET_TO_DISABLE)
+#define IFLAGS ROCKCHIP_INVERTER_HIWORD_MASK
/* 2 ^ (val + 1) */
static struct clk_div_table div_core_peri_t[] = {
GATE(0, "pclkin_cif0", "ext_cif0", 0,
RK2928_CLKGATE_CON(3), 3, GFLAGS),
+ INVERTER(0, "pclk_cif0", "pclkin_cif0",
+ RK2928_CLKSEL_CON(30), 8, IFLAGS),
/*
* the 480m are generated inside the usb block from these clocks,
COMPOSITE_FRAC(0, "hsadc_frac", "hsadc_src", 0,
RK2928_CLKSEL_CON(23), 0,
RK2928_CLKGATE_CON(2), 7, GFLAGS),
- MUX(SCLK_HSADC, "sclk_hsadc", mux_sclk_hsadc_p, 0,
+ MUX(0, "sclk_hsadc_out", mux_sclk_hsadc_p, 0,
RK2928_CLKSEL_CON(22), 4, 2, MFLAGS),
+ INVERTER(SCLK_HSADC, "sclk_hsadc", "sclk_hsadc_out",
+ RK2928_CLKSEL_CON(22), 7, IFLAGS),
COMPOSITE_NOMUX(SCLK_SARADC, "sclk_saradc", "xin24m", 0,
RK2928_CLKSEL_CON(24), 8, 8, DFLAGS,
GATE(0, "pclkin_cif1", "ext_cif1", 0,
RK2928_CLKGATE_CON(3), 4, GFLAGS),
+ INVERTER(0, "pclk_cif1", "pclkin_cif1",
+ RK2928_CLKSEL_CON(30), 12, IFLAGS),
COMPOSITE(0, "aclk_gpu_src", mux_pll_src_cpll_gpll_p, 0,
RK2928_CLKSEL_CON(33), 8, 1, MFLAGS, 0, 5, DFLAGS,
rate = pll->rate_table;
while (rate->rate > 0) {
- rate->bwadj = 0;
+ rate->nb = 1;
rate++;
}
}
RK3066_PLL_RATE( 742500000, 8, 495, 2),
RK3066_PLL_RATE( 696000000, 1, 58, 2),
RK3066_PLL_RATE( 600000000, 1, 50, 2),
- RK3066_PLL_RATE_BWADJ(594000000, 1, 198, 8, 1),
+ RK3066_PLL_RATE_NB(594000000, 1, 198, 8, 1),
RK3066_PLL_RATE( 552000000, 1, 46, 2),
RK3066_PLL_RATE( 504000000, 1, 84, 4),
RK3066_PLL_RATE( 500000000, 3, 125, 2),
PNAME(mux_uart2_p) = { "uart2_src", "uart2_frac", "xin24m" };
PNAME(mux_uart3_p) = { "uart3_src", "uart3_frac", "xin24m" };
PNAME(mux_uart4_p) = { "uart4_src", "uart4_frac", "xin24m" };
-PNAME(mux_cif_out_p) = { "cif_src", "xin24m" };
+PNAME(mux_vip_out_p) = { "vip_src", "xin24m" };
PNAME(mux_mac_p) = { "mac_pll_src", "ext_gmac" };
PNAME(mux_hsadcout_p) = { "hsadc_src", "ext_hsadc" };
PNAME(mux_edp_24m_p) = { "ext_edp_24m", "xin24m" };
#define MFLAGS CLK_MUX_HIWORD_MASK
#define DFLAGS CLK_DIVIDER_HIWORD_MASK
#define GFLAGS (CLK_GATE_HIWORD_MASK | CLK_GATE_SET_TO_DISABLE)
+#define IFLAGS ROCKCHIP_INVERTER_HIWORD_MASK
static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
/*
COMPOSITE_NODIV(0, "vip_src", mux_pll_src_cpll_gpll_p, 0,
RK3288_CLKSEL_CON(26), 8, 1, MFLAGS,
RK3288_CLKGATE_CON(3), 7, GFLAGS),
- COMPOSITE_NOGATE(0, "sclk_vip_out", mux_cif_out_p, 0,
+ COMPOSITE_NOGATE(0, "sclk_vip_out", mux_vip_out_p, 0,
RK3288_CLKSEL_CON(26), 15, 1, MFLAGS, 9, 5, DFLAGS),
DIV(0, "pclk_pd_alive", "gpll", 0,
COMPOSITE(0, "mac_pll_src", mux_pll_src_npll_cpll_gpll_p, 0,
RK3288_CLKSEL_CON(21), 0, 2, MFLAGS, 8, 5, DFLAGS,
RK3288_CLKGATE_CON(2), 5, GFLAGS),
- MUX(SCLK_MAC, "mac_clk", mux_mac_p, 0,
+ MUX(SCLK_MAC, "mac_clk", mux_mac_p, CLK_SET_RATE_PARENT,
RK3288_CLKSEL_CON(21), 4, 1, MFLAGS),
GATE(SCLK_MACREF_OUT, "sclk_macref_out", "mac_clk", 0,
RK3288_CLKGATE_CON(5), 3, GFLAGS),
COMPOSITE(0, "hsadc_src", mux_pll_src_cpll_gpll_p, 0,
RK3288_CLKSEL_CON(22), 0, 1, MFLAGS, 8, 8, DFLAGS,
RK3288_CLKGATE_CON(2), 6, GFLAGS),
- MUX(SCLK_HSADC, "sclk_hsadc_out", mux_hsadcout_p, 0,
+ MUX(0, "sclk_hsadc_out", mux_hsadcout_p, 0,
RK3288_CLKSEL_CON(22), 4, 1, MFLAGS),
+ INVERTER(SCLK_HSADC, "sclk_hsadc", "sclk_hsadc_out",
+ RK3288_CLKSEL_CON(22), 7, IFLAGS),
GATE(0, "jtag", "ext_jtag", 0,
RK3288_CLKGATE_CON(4), 14, GFLAGS),
*/
GATE(0, "pclk_vip_in", "ext_vip", 0, RK3288_CLKGATE_CON(16), 0, GFLAGS),
+ INVERTER(0, "pclk_vip", "pclk_vip_in", RK3288_CLKSEL_CON(29), 4, IFLAGS),
GATE(0, "pclk_isp_in", "ext_isp", 0, RK3288_CLKGATE_CON(16), 3, GFLAGS),
+ INVERTER(0, "pclk_isp", "pclk_isp_in", RK3288_CLKSEL_CON(29), 3, IFLAGS),
};
static const char *const rk3288_critical_clocks[] __initconst = {
--- /dev/null
+/*
+ * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/clock/rk3368-cru.h>
+#include "clk.h"
+
+#define RK3368_GRF_SOC_STATUS0 0x480
+
+enum rk3368_plls {
+ apllb, aplll, dpll, cpll, gpll, npll,
+};
+
+static struct rockchip_pll_rate_table rk3368_pll_rates[] = {
+ RK3066_PLL_RATE(2208000000, 1, 92, 1),
+ RK3066_PLL_RATE(2184000000, 1, 91, 1),
+ RK3066_PLL_RATE(2160000000, 1, 90, 1),
+ RK3066_PLL_RATE(2136000000, 1, 89, 1),
+ RK3066_PLL_RATE(2112000000, 1, 88, 1),
+ RK3066_PLL_RATE(2088000000, 1, 87, 1),
+ RK3066_PLL_RATE(2064000000, 1, 86, 1),
+ RK3066_PLL_RATE(2040000000, 1, 85, 1),
+ RK3066_PLL_RATE(2016000000, 1, 84, 1),
+ RK3066_PLL_RATE(1992000000, 1, 83, 1),
+ RK3066_PLL_RATE(1968000000, 1, 82, 1),
+ RK3066_PLL_RATE(1944000000, 1, 81, 1),
+ RK3066_PLL_RATE(1920000000, 1, 80, 1),
+ RK3066_PLL_RATE(1896000000, 1, 79, 1),
+ RK3066_PLL_RATE(1872000000, 1, 78, 1),
+ RK3066_PLL_RATE(1848000000, 1, 77, 1),
+ RK3066_PLL_RATE(1824000000, 1, 76, 1),
+ RK3066_PLL_RATE(1800000000, 1, 75, 1),
+ RK3066_PLL_RATE(1776000000, 1, 74, 1),
+ RK3066_PLL_RATE(1752000000, 1, 73, 1),
+ RK3066_PLL_RATE(1728000000, 1, 72, 1),
+ RK3066_PLL_RATE(1704000000, 1, 71, 1),
+ RK3066_PLL_RATE(1680000000, 1, 70, 1),
+ RK3066_PLL_RATE(1656000000, 1, 69, 1),
+ RK3066_PLL_RATE(1632000000, 1, 68, 1),
+ RK3066_PLL_RATE(1608000000, 1, 67, 1),
+ RK3066_PLL_RATE(1560000000, 1, 65, 1),
+ RK3066_PLL_RATE(1512000000, 1, 63, 1),
+ RK3066_PLL_RATE(1488000000, 1, 62, 1),
+ RK3066_PLL_RATE(1464000000, 1, 61, 1),
+ RK3066_PLL_RATE(1440000000, 1, 60, 1),
+ RK3066_PLL_RATE(1416000000, 1, 59, 1),
+ RK3066_PLL_RATE(1392000000, 1, 58, 1),
+ RK3066_PLL_RATE(1368000000, 1, 57, 1),
+ RK3066_PLL_RATE(1344000000, 1, 56, 1),
+ RK3066_PLL_RATE(1320000000, 1, 55, 1),
+ RK3066_PLL_RATE(1296000000, 1, 54, 1),
+ RK3066_PLL_RATE(1272000000, 1, 53, 1),
+ RK3066_PLL_RATE(1248000000, 1, 52, 1),
+ RK3066_PLL_RATE(1224000000, 1, 51, 1),
+ RK3066_PLL_RATE(1200000000, 1, 50, 1),
+ RK3066_PLL_RATE(1176000000, 1, 49, 1),
+ RK3066_PLL_RATE(1128000000, 1, 47, 1),
+ RK3066_PLL_RATE(1104000000, 1, 46, 1),
+ RK3066_PLL_RATE(1008000000, 1, 84, 2),
+ RK3066_PLL_RATE( 912000000, 1, 76, 2),
+ RK3066_PLL_RATE( 888000000, 1, 74, 2),
+ RK3066_PLL_RATE( 816000000, 1, 68, 2),
+ RK3066_PLL_RATE( 792000000, 1, 66, 2),
+ RK3066_PLL_RATE( 696000000, 1, 58, 2),
+ RK3066_PLL_RATE( 672000000, 1, 56, 2),
+ RK3066_PLL_RATE( 648000000, 1, 54, 2),
+ RK3066_PLL_RATE( 624000000, 1, 52, 2),
+ RK3066_PLL_RATE( 600000000, 1, 50, 2),
+ RK3066_PLL_RATE( 576000000, 1, 48, 2),
+ RK3066_PLL_RATE( 552000000, 1, 46, 2),
+ RK3066_PLL_RATE( 528000000, 1, 88, 4),
+ RK3066_PLL_RATE( 504000000, 1, 84, 4),
+ RK3066_PLL_RATE( 480000000, 1, 80, 4),
+ RK3066_PLL_RATE( 456000000, 1, 76, 4),
+ RK3066_PLL_RATE( 408000000, 1, 68, 4),
+ RK3066_PLL_RATE( 312000000, 1, 52, 4),
+ RK3066_PLL_RATE( 252000000, 1, 84, 8),
+ RK3066_PLL_RATE( 216000000, 1, 72, 8),
+ RK3066_PLL_RATE( 126000000, 2, 84, 8),
+ RK3066_PLL_RATE( 48000000, 2, 32, 8),
+ { /* sentinel */ },
+};
+
+PNAME(mux_pll_p) = { "xin24m", "xin32k" };
+PNAME(mux_armclkb_p) = { "apllb_core", "gpllb_core" };
+PNAME(mux_armclkl_p) = { "aplll_core", "gplll_core" };
+PNAME(mux_ddrphy_p) = { "dpll_ddr", "gpll_ddr" };
+PNAME(mux_cs_src_p) = { "apllb_cs", "aplll_cs", "gpll_cs"};
+PNAME(mux_aclk_bus_src_p) = { "cpll_aclk_bus", "gpll_aclk_bus" };
+
+PNAME(mux_pll_src_cpll_gpll_p) = { "cpll", "gpll" };
+PNAME(mux_pll_src_cpll_gpll_npll_p) = { "cpll", "gpll", "npll" };
+PNAME(mux_pll_src_npll_cpll_gpll_p) = { "npll", "cpll", "gpll" };
+PNAME(mux_pll_src_cpll_gpll_usb_p) = { "cpll", "gpll", "usbphy_480m" };
+PNAME(mux_pll_src_cpll_gpll_usb_usb_p) = { "cpll", "gpll", "usbphy_480m",
+ "usbphy_480m" };
+PNAME(mux_pll_src_cpll_gpll_usb_npll_p) = { "cpll", "gpll", "usbphy_480m",
+ "npll" };
+PNAME(mux_pll_src_cpll_gpll_npll_npll_p) = { "cpll", "gpll", "npll", "npll" };
+PNAME(mux_pll_src_cpll_gpll_npll_usb_p) = { "cpll", "gpll", "npll",
+ "usbphy_480m" };
+
+PNAME(mux_i2s_8ch_pre_p) = { "i2s_8ch_src", "i2s_8ch_frac",
+ "ext_i2s", "xin12m" };
+PNAME(mux_i2s_8ch_clkout_p) = { "i2s_8ch_pre", "xin12m" };
+PNAME(mux_i2s_2ch_p) = { "i2s_2ch_src", "i2s_2ch_frac",
+ "dummy", "xin12m" };
+PNAME(mux_spdif_8ch_p) = { "spdif_8ch_pre", "spdif_8ch_frac",
+ "ext_i2s", "xin12m" };
+PNAME(mux_edp_24m_p) = { "dummy", "xin24m" };
+PNAME(mux_vip_out_p) = { "vip_src", "xin24m" };
+PNAME(mux_usbphy480m_p) = { "usbotg_out", "xin24m" };
+PNAME(mux_hsic_usbphy480m_p) = { "usbotg_out", "dummy" };
+PNAME(mux_hsicphy480m_p) = { "cpll", "gpll", "usbphy_480m" };
+PNAME(mux_uart0_p) = { "uart0_src", "uart0_frac", "xin24m" };
+PNAME(mux_uart1_p) = { "uart1_src", "uart1_frac", "xin24m" };
+PNAME(mux_uart2_p) = { "uart2_src", "xin24m" };
+PNAME(mux_uart3_p) = { "uart3_src", "uart3_frac", "xin24m" };
+PNAME(mux_uart4_p) = { "uart4_src", "uart4_frac", "xin24m" };
+PNAME(mux_mac_p) = { "mac_pll_src", "ext_gmac" };
+PNAME(mux_mmc_src_p) = { "cpll", "gpll", "usbphy_480m", "xin24m" };
+
+static struct rockchip_pll_clock rk3368_pll_clks[] __initdata = {
+ [apllb] = PLL(pll_rk3066, PLL_APLLB, "apllb", mux_pll_p, 0, RK3368_PLL_CON(0),
+ RK3368_PLL_CON(3), 8, 1, 0, rk3368_pll_rates),
+ [aplll] = PLL(pll_rk3066, PLL_APLLL, "aplll", mux_pll_p, 0, RK3368_PLL_CON(4),
+ RK3368_PLL_CON(7), 8, 0, 0, rk3368_pll_rates),
+ [dpll] = PLL(pll_rk3066, PLL_DPLL, "dpll", mux_pll_p, 0, RK3368_PLL_CON(8),
+ RK3368_PLL_CON(11), 8, 2, 0, NULL),
+ [cpll] = PLL(pll_rk3066, PLL_CPLL, "cpll", mux_pll_p, 0, RK3368_PLL_CON(12),
+ RK3368_PLL_CON(15), 8, 3, ROCKCHIP_PLL_SYNC_RATE, rk3368_pll_rates),
+ [gpll] = PLL(pll_rk3066, PLL_GPLL, "gpll", mux_pll_p, 0, RK3368_PLL_CON(16),
+ RK3368_PLL_CON(19), 8, 4, ROCKCHIP_PLL_SYNC_RATE, rk3368_pll_rates),
+ [npll] = PLL(pll_rk3066, PLL_NPLL, "npll", mux_pll_p, 0, RK3368_PLL_CON(20),
+ RK3368_PLL_CON(23), 8, 5, ROCKCHIP_PLL_SYNC_RATE, rk3368_pll_rates),
+};
+
+static struct clk_div_table div_ddrphy_t[] = {
+ { .val = 0, .div = 1 },
+ { .val = 1, .div = 2 },
+ { .val = 3, .div = 4 },
+ { /* sentinel */ },
+};
+
+#define MFLAGS CLK_MUX_HIWORD_MASK
+#define DFLAGS CLK_DIVIDER_HIWORD_MASK
+#define GFLAGS (CLK_GATE_HIWORD_MASK | CLK_GATE_SET_TO_DISABLE)
+#define IFLAGS ROCKCHIP_INVERTER_HIWORD_MASK
+
+static const struct rockchip_cpuclk_reg_data rk3368_cpuclkb_data = {
+ .core_reg = RK3368_CLKSEL_CON(0),
+ .div_core_shift = 0,
+ .div_core_mask = 0x1f,
+ .mux_core_shift = 15,
+};
+
+static const struct rockchip_cpuclk_reg_data rk3368_cpuclkl_data = {
+ .core_reg = RK3368_CLKSEL_CON(2),
+ .div_core_shift = 0,
+ .div_core_mask = 0x1f,
+ .mux_core_shift = 7,
+};
+
+#define RK3368_DIV_ACLKM_MASK 0x1f
+#define RK3368_DIV_ACLKM_SHIFT 8
+#define RK3368_DIV_ATCLK_MASK 0x1f
+#define RK3368_DIV_ATCLK_SHIFT 0
+#define RK3368_DIV_PCLK_DBG_MASK 0x1f
+#define RK3368_DIV_PCLK_DBG_SHIFT 8
+
+#define RK3368_CLKSEL0(_offs, _aclkm) \
+ { \
+ .reg = RK3288_CLKSEL_CON(0 + _offs), \
+ .val = HIWORD_UPDATE(_aclkm, RK3368_DIV_ACLKM_MASK, \
+ RK3368_DIV_ACLKM_SHIFT), \
+ }
+#define RK3368_CLKSEL1(_offs, _atclk, _pdbg) \
+ { \
+ .reg = RK3288_CLKSEL_CON(1 + _offs), \
+ .val = HIWORD_UPDATE(_atclk, RK3368_DIV_ATCLK_MASK, \
+ RK3368_DIV_ATCLK_SHIFT) | \
+ HIWORD_UPDATE(_pdbg, RK3368_DIV_PCLK_DBG_MASK, \
+ RK3368_DIV_PCLK_DBG_SHIFT), \
+ }
+
+/* cluster_b: aclkm in clksel0, rest in clksel1 */
+#define RK3368_CPUCLKB_RATE(_prate, _aclkm, _atclk, _pdbg) \
+ { \
+ .prate = _prate, \
+ .divs = { \
+ RK3368_CLKSEL0(0, _aclkm), \
+ RK3368_CLKSEL1(0, _atclk, _pdbg), \
+ }, \
+ }
+
+/* cluster_l: aclkm in clksel2, rest in clksel3 */
+#define RK3368_CPUCLKL_RATE(_prate, _aclkm, _atclk, _pdbg) \
+ { \
+ .prate = _prate, \
+ .divs = { \
+ RK3368_CLKSEL0(2, _aclkm), \
+ RK3368_CLKSEL1(2, _atclk, _pdbg), \
+ }, \
+ }
+
+static struct rockchip_cpuclk_rate_table rk3368_cpuclkb_rates[] __initdata = {
+ RK3368_CPUCLKB_RATE(1512000000, 2, 6, 6),
+ RK3368_CPUCLKB_RATE(1488000000, 2, 5, 5),
+ RK3368_CPUCLKB_RATE(1416000000, 2, 5, 5),
+ RK3368_CPUCLKB_RATE(1200000000, 2, 4, 4),
+ RK3368_CPUCLKB_RATE(1008000000, 2, 4, 4),
+ RK3368_CPUCLKB_RATE( 816000000, 2, 3, 3),
+ RK3368_CPUCLKB_RATE( 696000000, 2, 3, 3),
+ RK3368_CPUCLKB_RATE( 600000000, 2, 2, 2),
+ RK3368_CPUCLKB_RATE( 408000000, 2, 2, 2),
+ RK3368_CPUCLKB_RATE( 312000000, 2, 2, 2),
+};
+
+static struct rockchip_cpuclk_rate_table rk3368_cpuclkl_rates[] __initdata = {
+ RK3368_CPUCLKL_RATE(1512000000, 2, 7, 7),
+ RK3368_CPUCLKL_RATE(1488000000, 2, 6, 6),
+ RK3368_CPUCLKL_RATE(1416000000, 2, 6, 6),
+ RK3368_CPUCLKL_RATE(1200000000, 2, 5, 5),
+ RK3368_CPUCLKL_RATE(1008000000, 2, 5, 5),
+ RK3368_CPUCLKL_RATE( 816000000, 2, 4, 4),
+ RK3368_CPUCLKL_RATE( 696000000, 2, 3, 3),
+ RK3368_CPUCLKL_RATE( 600000000, 2, 3, 3),
+ RK3368_CPUCLKL_RATE( 408000000, 2, 2, 2),
+ RK3368_CPUCLKL_RATE( 312000000, 2, 2, 2),
+};
+
+static struct rockchip_clk_branch rk3368_clk_branches[] __initdata = {
+ /*
+ * Clock-Architecture Diagram 2
+ */
+
+ MUX(SCLK_USBPHY480M, "usbphy_480m", mux_usbphy480m_p, CLK_SET_RATE_PARENT,
+ RK3368_CLKSEL_CON(13), 8, 1, MFLAGS),
+
+ GATE(0, "apllb_core", "apllb", CLK_IGNORE_UNUSED,
+ RK3368_CLKGATE_CON(0), 0, GFLAGS),
+ GATE(0, "gpllb_core", "gpll", CLK_IGNORE_UNUSED,
+ RK3368_CLKGATE_CON(0), 1, GFLAGS),
+
+ GATE(0, "aplll_core", "aplll", CLK_IGNORE_UNUSED,
+ RK3368_CLKGATE_CON(0), 4, GFLAGS),
+ GATE(0, "gplll_core", "gpll", CLK_IGNORE_UNUSED,
+ RK3368_CLKGATE_CON(0), 5, GFLAGS),
+
+ DIV(0, "aclkm_core_b", "armclkb", 0,
+ RK3368_CLKSEL_CON(0), 8, 5, DFLAGS | CLK_DIVIDER_READ_ONLY),
+ DIV(0, "atclk_core_b", "armclkb", 0,
+ RK3368_CLKSEL_CON(1), 0, 5, DFLAGS | CLK_DIVIDER_READ_ONLY),
+ DIV(0, "pclk_dbg_b", "armclkb", 0,
+ RK3368_CLKSEL_CON(1), 8, 5, DFLAGS | CLK_DIVIDER_READ_ONLY),
+
+ DIV(0, "aclkm_core_l", "armclkl", 0,
+ RK3368_CLKSEL_CON(2), 8, 5, DFLAGS | CLK_DIVIDER_READ_ONLY),
+ DIV(0, "atclk_core_l", "armclkl", 0,
+ RK3368_CLKSEL_CON(3), 0, 5, DFLAGS | CLK_DIVIDER_READ_ONLY),
+ DIV(0, "pclk_dbg_l", "armclkl", 0,
+ RK3368_CLKSEL_CON(3), 8, 5, DFLAGS | CLK_DIVIDER_READ_ONLY),
+
+ GATE(0, "apllb_cs", "apllb", CLK_IGNORE_UNUSED,
+ RK3368_CLKGATE_CON(0), 9, GFLAGS),
+ GATE(0, "aplll_cs", "aplll", CLK_IGNORE_UNUSED,
+ RK3368_CLKGATE_CON(0), 10, GFLAGS),
+ GATE(0, "gpll_cs", "gpll", CLK_IGNORE_UNUSED,
+ RK3368_CLKGATE_CON(0), 8, GFLAGS),
+ COMPOSITE_NOGATE(0, "sclk_cs_pre", mux_cs_src_p, CLK_IGNORE_UNUSED,
+ RK3368_CLKSEL_CON(4), 6, 2, MFLAGS, 0, 5, DFLAGS),
+ COMPOSITE_NOMUX(0, "clkin_trace", "sclk_cs_pre", CLK_IGNORE_UNUSED,
+ RK3368_CLKSEL_CON(4), 8, 5, DFLAGS,
+ RK3368_CLKGATE_CON(0), 13, GFLAGS),
+
+ COMPOSITE(0, "aclk_cci_pre", mux_pll_src_cpll_gpll_usb_npll_p, CLK_IGNORE_UNUSED,
+ RK3368_CLKSEL_CON(5), 6, 2, MFLAGS, 0, 7, DFLAGS,
+ RK3368_CLKGATE_CON(0), 12, GFLAGS),
+ GATE(SCLK_PVTM_CORE, "sclk_pvtm_core", "xin24m", 0, RK3368_CLKGATE_CON(7), 10, GFLAGS),
+
+ GATE(0, "dpll_ddr", "dpll", CLK_IGNORE_UNUSED,
+ RK3368_CLKGATE_CON(1), 8, GFLAGS),
+ GATE(0, "gpll_ddr", "gpll", 0,
+ RK3368_CLKGATE_CON(1), 9, GFLAGS),
+ COMPOSITE_NOGATE_DIVTBL(0, "ddrphy_src", mux_ddrphy_p, CLK_IGNORE_UNUSED,
+ RK3368_CLKSEL_CON(13), 4, 1, MFLAGS, 0, 2, DFLAGS, div_ddrphy_t),
+
+ GATE(0, "sclk_ddr", "ddrphy_div4", CLK_IGNORE_UNUSED,
+ RK3368_CLKGATE_CON(6), 14, GFLAGS),
+ GATE(0, "sclk_ddr4x", "ddrphy_src", CLK_IGNORE_UNUSED,
+ RK3368_CLKGATE_CON(6), 15, GFLAGS),
+
+ GATE(0, "gpll_aclk_bus", "gpll", CLK_IGNORE_UNUSED,
+ RK3368_CLKGATE_CON(1), 10, GFLAGS),
+ GATE(0, "cpll_aclk_bus", "cpll", CLK_IGNORE_UNUSED,
+ RK3368_CLKGATE_CON(1), 11, GFLAGS),
+ COMPOSITE_NOGATE(0, "aclk_bus_src", mux_aclk_bus_src_p, CLK_IGNORE_UNUSED,
+ RK3368_CLKSEL_CON(8), 7, 1, MFLAGS, 0, 5, DFLAGS),
+
+ GATE(ACLK_BUS, "aclk_bus", "aclk_bus_src", CLK_IGNORE_UNUSED,
+ RK3368_CLKGATE_CON(1), 0, GFLAGS),
+ COMPOSITE_NOMUX(PCLK_BUS, "pclk_bus", "aclk_bus_src", CLK_IGNORE_UNUSED,
+ RK3368_CLKSEL_CON(8), 12, 3, DFLAGS,
+ RK3368_CLKGATE_CON(1), 2, GFLAGS),
+ COMPOSITE_NOMUX(HCLK_BUS, "hclk_bus", "aclk_bus_src", CLK_IGNORE_UNUSED,
+ RK3368_CLKSEL_CON(8), 8, 2, DFLAGS,
+ RK3368_CLKGATE_CON(1), 1, GFLAGS),
+ COMPOSITE_NOMUX(0, "sclk_crypto", "aclk_bus_src", 0,
+ RK3368_CLKSEL_CON(10), 14, 2, DFLAGS,
+ RK3368_CLKGATE_CON(7), 2, GFLAGS),
+
+ COMPOSITE(0, "fclk_mcu_src", mux_pll_src_cpll_gpll_p, CLK_IGNORE_UNUSED,
+ RK3368_CLKSEL_CON(12), 7, 1, MFLAGS, 0, 5, DFLAGS,
+ RK3368_CLKGATE_CON(1), 3, GFLAGS),
+ /*
+ * stclk_mcu is listed as child of fclk_mcu_src in diagram 5,
+ * but stclk_mcu has an additional own divider in diagram 2
+ */
+ COMPOSITE_NOMUX(0, "stclk_mcu", "fclk_mcu_src", 0,
+ RK3368_CLKSEL_CON(12), 8, 3, DFLAGS,
+ RK3368_CLKGATE_CON(13), 13, GFLAGS),
+
+ COMPOSITE(0, "i2s_8ch_src", mux_pll_src_cpll_gpll_p, 0,
+ RK3368_CLKSEL_CON(27), 12, 1, MFLAGS, 0, 7, DFLAGS,
+ RK3368_CLKGATE_CON(6), 1, GFLAGS),
+ COMPOSITE_FRAC(0, "i2s_8ch_frac", "i2s_8ch_src", CLK_SET_RATE_PARENT,
+ RK3368_CLKSEL_CON(28), 0,
+ RK3368_CLKGATE_CON(6), 2, GFLAGS),
+ MUX(0, "i2s_8ch_pre", mux_i2s_8ch_pre_p, CLK_SET_RATE_PARENT,
+ RK3368_CLKSEL_CON(27), 8, 2, MFLAGS),
+ COMPOSITE_NODIV(SCLK_I2S_8CH_OUT, "i2s_8ch_clkout", mux_i2s_8ch_clkout_p, 0,
+ RK3368_CLKSEL_CON(27), 15, 1, MFLAGS,
+ RK3368_CLKGATE_CON(6), 0, GFLAGS),
+ GATE(SCLK_I2S_8CH, "sclk_i2s_8ch", "i2s_8ch_pre", CLK_SET_RATE_PARENT,
+ RK3368_CLKGATE_CON(6), 3, GFLAGS),
+ COMPOSITE(0, "spdif_8ch_src", mux_pll_src_cpll_gpll_p, 0,
+ RK3368_CLKSEL_CON(31), 12, 1, MFLAGS, 0, 7, DFLAGS,
+ RK3368_CLKGATE_CON(6), 4, GFLAGS),
+ COMPOSITE_FRAC(0, "spdif_8ch_frac", "spdif_8ch_src", CLK_SET_RATE_PARENT,
+ RK3368_CLKSEL_CON(32), 0,
+ RK3368_CLKGATE_CON(6), 5, GFLAGS),
+ COMPOSITE_NODIV(SCLK_SPDIF_8CH, "sclk_spdif_8ch", mux_spdif_8ch_p, 0,
+ RK3368_CLKSEL_CON(31), 8, 2, MFLAGS,
+ RK3368_CLKGATE_CON(6), 6, GFLAGS),
+ COMPOSITE(0, "i2s_2ch_src", mux_pll_src_cpll_gpll_p, 0,
+ RK3368_CLKSEL_CON(53), 12, 1, MFLAGS, 0, 7, DFLAGS,
+ RK3368_CLKGATE_CON(5), 13, GFLAGS),
+ COMPOSITE_FRAC(0, "i2s_2ch_frac", "i2s_2ch_src", CLK_SET_RATE_PARENT,
+ RK3368_CLKSEL_CON(54), 0,
+ RK3368_CLKGATE_CON(5), 14, GFLAGS),
+ COMPOSITE_NODIV(SCLK_I2S_2CH, "sclk_i2s_2ch", mux_i2s_2ch_p, 0,
+ RK3368_CLKSEL_CON(53), 8, 2, MFLAGS,
+ RK3368_CLKGATE_CON(5), 15, GFLAGS),
+
+ COMPOSITE(0, "sclk_tsp", mux_pll_src_cpll_gpll_npll_p, 0,
+ RK3368_CLKSEL_CON(46), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3368_CLKGATE_CON(6), 12, GFLAGS),
+ GATE(0, "sclk_hsadc_tsp", "ext_hsadc_tsp", 0,
+ RK3368_CLKGATE_CON(13), 7, GFLAGS),
+
+ MUX(0, "uart_src", mux_pll_src_cpll_gpll_p, 0,
+ RK3368_CLKSEL_CON(35), 12, 1, MFLAGS),
+ COMPOSITE_NOMUX(0, "uart2_src", "uart_src", 0,
+ RK3368_CLKSEL_CON(37), 0, 7, DFLAGS,
+ RK3368_CLKGATE_CON(2), 4, GFLAGS),
+ MUX(SCLK_UART2, "sclk_uart2", mux_uart2_p, CLK_SET_RATE_PARENT,
+ RK3368_CLKSEL_CON(37), 8, 1, MFLAGS),
+
+ /*
+ * Clock-Architecture Diagram 3
+ */
+
+ COMPOSITE(0, "aclk_vepu", mux_pll_src_cpll_gpll_usb_p, 0,
+ RK3368_CLKSEL_CON(15), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3368_CLKGATE_CON(4), 6, GFLAGS),
+ COMPOSITE(0, "aclk_vdpu", mux_pll_src_cpll_gpll_usb_p, 0,
+ RK3368_CLKSEL_CON(15), 14, 2, MFLAGS, 8, 5, DFLAGS,
+ RK3368_CLKGATE_CON(4), 7, GFLAGS),
+
+ /*
+ * We introduce a virtual node of hclk_vodec_pre_v to split one clock
+ * struct with a gate and a fix divider into two node in software.
+ */
+ GATE(0, "hclk_video_pre_v", "aclk_vdpu", 0,
+ RK3368_CLKGATE_CON(4), 8, GFLAGS),
+
+ COMPOSITE(0, "sclk_hevc_cabac_src", mux_pll_src_cpll_gpll_npll_usb_p, 0,
+ RK3368_CLKSEL_CON(17), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3368_CLKGATE_CON(5), 1, GFLAGS),
+ COMPOSITE(0, "sclk_hevc_core_src", mux_pll_src_cpll_gpll_npll_usb_p, 0,
+ RK3368_CLKSEL_CON(17), 14, 2, MFLAGS, 8, 5, DFLAGS,
+ RK3368_CLKGATE_CON(5), 2, GFLAGS),
+
+ COMPOSITE(0, "aclk_vio0", mux_pll_src_cpll_gpll_usb_p, CLK_IGNORE_UNUSED,
+ RK3368_CLKSEL_CON(19), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3368_CLKGATE_CON(4), 0, GFLAGS),
+ DIV(0, "hclk_vio", "aclk_vio0", 0,
+ RK3368_CLKSEL_CON(21), 0, 5, DFLAGS),
+
+ COMPOSITE(0, "aclk_rga_pre", mux_pll_src_cpll_gpll_usb_p, 0,
+ RK3368_CLKSEL_CON(18), 14, 2, MFLAGS, 8, 5, DFLAGS,
+ RK3368_CLKGATE_CON(4), 3, GFLAGS),
+ COMPOSITE(SCLK_RGA, "sclk_rga", mux_pll_src_cpll_gpll_usb_p, 0,
+ RK3368_CLKSEL_CON(18), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3368_CLKGATE_CON(4), 4, GFLAGS),
+
+ COMPOSITE(DCLK_VOP, "dclk_vop", mux_pll_src_cpll_gpll_npll_p, 0,
+ RK3368_CLKSEL_CON(20), 8, 2, MFLAGS, 0, 8, DFLAGS,
+ RK3368_CLKGATE_CON(4), 1, GFLAGS),
+
+ GATE(SCLK_VOP0_PWM, "sclk_vop0_pwm", "xin24m", 0,
+ RK3368_CLKGATE_CON(4), 2, GFLAGS),
+
+ COMPOSITE(SCLK_ISP, "sclk_isp", mux_pll_src_cpll_gpll_npll_npll_p, 0,
+ RK3368_CLKSEL_CON(22), 6, 2, MFLAGS, 0, 6, DFLAGS,
+ RK3368_CLKGATE_CON(4), 9, GFLAGS),
+
+ GATE(0, "pclk_isp_in", "ext_isp", 0,
+ RK3368_CLKGATE_CON(17), 2, GFLAGS),
+ INVERTER(PCLK_ISP, "pclk_isp", "pclk_isp_in",
+ RK3368_CLKSEL_CON(21), 6, IFLAGS),
+
+ GATE(0, "pclk_vip_in", "ext_vip", 0,
+ RK3368_CLKGATE_CON(16), 13, GFLAGS),
+ INVERTER(PCLK_VIP, "pclk_vip", "pclk_vip_in",
+ RK3368_CLKSEL_CON(21), 13, IFLAGS),
+
+ GATE(SCLK_HDMI_HDCP, "sclk_hdmi_hdcp", "xin24m", 0,
+ RK3368_CLKGATE_CON(4), 13, GFLAGS),
+ GATE(SCLK_HDMI_CEC, "sclk_hdmi_cec", "xin32k", 0,
+ RK3368_CLKGATE_CON(5), 12, GFLAGS),
+
+ COMPOSITE_NODIV(0, "vip_src", mux_pll_src_cpll_gpll_p, 0,
+ RK3368_CLKSEL_CON(21), 15, 1, MFLAGS,
+ RK3368_CLKGATE_CON(4), 5, GFLAGS),
+ COMPOSITE_NOGATE(0, "sclk_vip_out", mux_vip_out_p, 0,
+ RK3368_CLKSEL_CON(21), 14, 1, MFLAGS, 8, 5, DFLAGS),
+
+ COMPOSITE_NODIV(SCLK_EDP_24M, "sclk_edp_24m", mux_edp_24m_p, 0,
+ RK3368_CLKSEL_CON(23), 8, 1, MFLAGS,
+ RK3368_CLKGATE_CON(5), 4, GFLAGS),
+ COMPOSITE(SCLK_EDP, "sclk_edp", mux_pll_src_cpll_gpll_npll_npll_p, 0,
+ RK3368_CLKSEL_CON(23), 6, 2, MFLAGS, 0, 6, DFLAGS,
+ RK3368_CLKGATE_CON(5), 3, GFLAGS),
+
+ COMPOSITE(SCLK_HDCP, "sclk_hdcp", mux_pll_src_cpll_gpll_npll_npll_p, 0,
+ RK3368_CLKSEL_CON(55), 6, 2, MFLAGS, 0, 6, DFLAGS,
+ RK3368_CLKGATE_CON(5), 5, GFLAGS),
+
+ DIV(0, "pclk_pd_alive", "gpll", 0,
+ RK3368_CLKSEL_CON(10), 8, 5, DFLAGS),
+
+ /* sclk_timer has a gate in the sgrf */
+
+ COMPOSITE_NOMUX(0, "pclk_pd_pmu", "gpll", CLK_IGNORE_UNUSED,
+ RK3368_CLKSEL_CON(10), 0, 5, DFLAGS,
+ RK3368_CLKGATE_CON(7), 9, GFLAGS),
+ GATE(SCLK_PVTM_PMU, "sclk_pvtm_pmu", "xin24m", 0,
+ RK3368_CLKGATE_CON(7), 3, GFLAGS),
+ COMPOSITE(0, "sclk_gpu_core_src", mux_pll_src_cpll_gpll_usb_npll_p, 0,
+ RK3368_CLKSEL_CON(14), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3368_CLKGATE_CON(4), 11, GFLAGS),
+ MUX(0, "aclk_gpu_src", mux_pll_src_cpll_gpll_p, 0,
+ RK3368_CLKSEL_CON(14), 14, 1, MFLAGS),
+ COMPOSITE_NOMUX(0, "aclk_gpu_mem_pre", "aclk_gpu_src", 0,
+ RK3368_CLKSEL_CON(14), 8, 5, DFLAGS,
+ RK3368_CLKGATE_CON(5), 8, GFLAGS),
+ COMPOSITE_NOMUX(0, "aclk_gpu_cfg_pre", "aclk_gpu_src", 0,
+ RK3368_CLKSEL_CON(16), 8, 5, DFLAGS,
+ RK3368_CLKGATE_CON(5), 9, GFLAGS),
+ GATE(SCLK_PVTM_GPU, "sclk_pvtm_gpu", "xin24m", 0,
+ RK3368_CLKGATE_CON(7), 11, GFLAGS),
+
+ COMPOSITE(0, "aclk_peri_src", mux_pll_src_cpll_gpll_p, CLK_IGNORE_UNUSED,
+ RK3368_CLKSEL_CON(9), 7, 1, MFLAGS, 0, 5, DFLAGS,
+ RK3368_CLKGATE_CON(3), 0, GFLAGS),
+ COMPOSITE_NOMUX(PCLK_PERI, "pclk_peri", "aclk_peri_src", 0,
+ RK3368_CLKSEL_CON(9), 12, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO,
+ RK3368_CLKGATE_CON(3), 3, GFLAGS),
+ COMPOSITE_NOMUX(HCLK_PERI, "hclk_peri", "aclk_peri_src", CLK_IGNORE_UNUSED,
+ RK3368_CLKSEL_CON(9), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO,
+ RK3368_CLKGATE_CON(3), 2, GFLAGS),
+ GATE(ACLK_PERI, "aclk_peri", "aclk_peri_src", CLK_IGNORE_UNUSED,
+ RK3368_CLKGATE_CON(3), 1, GFLAGS),
+
+ GATE(0, "sclk_mipidsi_24m", "xin24m", 0, RK3368_CLKGATE_CON(4), 14, GFLAGS),
+
+ /*
+ * Clock-Architecture Diagram 4
+ */
+
+ COMPOSITE(SCLK_SPI0, "sclk_spi0", mux_pll_src_cpll_gpll_p, 0,
+ RK3368_CLKSEL_CON(45), 7, 1, MFLAGS, 0, 7, DFLAGS,
+ RK3368_CLKGATE_CON(3), 7, GFLAGS),
+ COMPOSITE(SCLK_SPI1, "sclk_spi1", mux_pll_src_cpll_gpll_p, 0,
+ RK3368_CLKSEL_CON(45), 15, 1, MFLAGS, 8, 7, DFLAGS,
+ RK3368_CLKGATE_CON(3), 8, GFLAGS),
+ COMPOSITE(SCLK_SPI2, "sclk_spi2", mux_pll_src_cpll_gpll_p, 0,
+ RK3368_CLKSEL_CON(46), 15, 1, MFLAGS, 8, 7, DFLAGS,
+ RK3368_CLKGATE_CON(3), 9, GFLAGS),
+
+
+ COMPOSITE(SCLK_SDMMC, "sclk_sdmmc", mux_mmc_src_p, 0,
+ RK3368_CLKSEL_CON(50), 8, 2, MFLAGS, 0, 7, DFLAGS,
+ RK3368_CLKGATE_CON(7), 12, GFLAGS),
+ COMPOSITE(SCLK_SDIO0, "sclk_sdio0", mux_mmc_src_p, 0,
+ RK3368_CLKSEL_CON(48), 8, 2, MFLAGS, 0, 7, DFLAGS,
+ RK3368_CLKGATE_CON(7), 13, GFLAGS),
+ COMPOSITE(SCLK_EMMC, "sclk_emmc", mux_mmc_src_p, 0,
+ RK3368_CLKSEL_CON(51), 8, 2, MFLAGS, 0, 7, DFLAGS,
+ RK3368_CLKGATE_CON(7), 15, GFLAGS),
+
+ MMC(SCLK_SDMMC_DRV, "sdmmc_drv", "sclk_sdmmc", RK3368_SDMMC_CON0, 1),
+ MMC(SCLK_SDMMC_SAMPLE, "sdmmc_sample", "sclk_sdmmc", RK3368_SDMMC_CON1, 0),
+
+ MMC(SCLK_SDIO0_DRV, "sdio0_drv", "sclk_sdio0", RK3368_SDIO0_CON0, 1),
+ MMC(SCLK_SDIO0_SAMPLE, "sdio0_sample", "sclk_sdio0", RK3368_SDIO0_CON1, 0),
+
+ MMC(SCLK_EMMC_DRV, "emmc_drv", "sclk_emmc", RK3368_EMMC_CON0, 1),
+ MMC(SCLK_EMMC_SAMPLE, "emmc_sample", "sclk_emmc", RK3368_EMMC_CON1, 0),
+
+ GATE(SCLK_OTGPHY0, "sclk_otgphy0", "xin24m", CLK_IGNORE_UNUSED,
+ RK3368_CLKGATE_CON(8), 1, GFLAGS),
+
+ /* pmu_grf_soc_con0[6] allows to select between xin32k and pvtm_pmu */
+ GATE(SCLK_OTG_ADP, "sclk_otg_adp", "xin32k", CLK_IGNORE_UNUSED,
+ RK3368_CLKGATE_CON(8), 4, GFLAGS),
+
+ /* pmu_grf_soc_con0[6] allows to select between xin32k and pvtm_pmu */
+ COMPOSITE_NOMUX(SCLK_TSADC, "sclk_tsadc", "xin32k", 0,
+ RK3368_CLKSEL_CON(25), 0, 6, DFLAGS,
+ RK3368_CLKGATE_CON(3), 5, GFLAGS),
+
+ COMPOSITE_NOMUX(SCLK_SARADC, "sclk_saradc", "xin24m", 0,
+ RK3368_CLKSEL_CON(25), 8, 8, DFLAGS,
+ RK3368_CLKGATE_CON(3), 6, GFLAGS),
+
+ COMPOSITE(SCLK_NANDC0, "sclk_nandc0", mux_pll_src_cpll_gpll_p, 0,
+ RK3368_CLKSEL_CON(47), 7, 1, MFLAGS, 0, 5, DFLAGS,
+ RK3368_CLKGATE_CON(7), 8, GFLAGS),
+
+ COMPOSITE(SCLK_SFC, "sclk_sfc", mux_pll_src_cpll_gpll_p, 0,
+ RK3368_CLKSEL_CON(52), 7, 1, MFLAGS, 0, 5, DFLAGS,
+ RK3368_CLKGATE_CON(6), 7, GFLAGS),
+
+ COMPOSITE(0, "uart0_src", mux_pll_src_cpll_gpll_usb_usb_p, 0,
+ RK3368_CLKSEL_CON(33), 12, 2, MFLAGS, 0, 7, DFLAGS,
+ RK3368_CLKGATE_CON(2), 0, GFLAGS),
+ COMPOSITE_FRAC(0, "uart0_frac", "uart0_src", CLK_SET_RATE_PARENT,
+ RK3368_CLKSEL_CON(34), 0,
+ RK3368_CLKGATE_CON(2), 1, GFLAGS),
+ MUX(SCLK_UART0, "sclk_uart0", mux_uart0_p, CLK_SET_RATE_PARENT,
+ RK3368_CLKSEL_CON(33), 8, 2, MFLAGS),
+
+ COMPOSITE_NOMUX(0, "uart1_src", "uart_src", 0,
+ RK3368_CLKSEL_CON(35), 0, 7, DFLAGS,
+ RK3368_CLKGATE_CON(2), 2, GFLAGS),
+ COMPOSITE_FRAC(0, "uart1_frac", "uart1_src", CLK_SET_RATE_PARENT,
+ RK3368_CLKSEL_CON(36), 0,
+ RK3368_CLKGATE_CON(2), 3, GFLAGS),
+ MUX(SCLK_UART1, "sclk_uart1", mux_uart1_p, CLK_SET_RATE_PARENT,
+ RK3368_CLKSEL_CON(35), 8, 2, MFLAGS),
+
+ COMPOSITE_NOMUX(0, "uart3_src", "uart_src", 0,
+ RK3368_CLKSEL_CON(39), 0, 7, DFLAGS,
+ RK3368_CLKGATE_CON(2), 6, GFLAGS),
+ COMPOSITE_FRAC(0, "uart3_frac", "uart3_src", CLK_SET_RATE_PARENT,
+ RK3368_CLKSEL_CON(40), 0,
+ RK3368_CLKGATE_CON(2), 7, GFLAGS),
+ MUX(SCLK_UART3, "sclk_uart3", mux_uart3_p, CLK_SET_RATE_PARENT,
+ RK3368_CLKSEL_CON(39), 8, 2, MFLAGS),
+
+ COMPOSITE_NOMUX(0, "uart4_src", "uart_src", 0,
+ RK3368_CLKSEL_CON(41), 0, 7, DFLAGS,
+ RK3368_CLKGATE_CON(2), 8, GFLAGS),
+ COMPOSITE_FRAC(0, "uart4_frac", "uart4_src", CLK_SET_RATE_PARENT,
+ RK3368_CLKSEL_CON(42), 0,
+ RK3368_CLKGATE_CON(2), 9, GFLAGS),
+ MUX(SCLK_UART4, "sclk_uart4", mux_uart4_p, CLK_SET_RATE_PARENT,
+ RK3368_CLKSEL_CON(41), 8, 2, MFLAGS),
+
+ COMPOSITE(0, "mac_pll_src", mux_pll_src_npll_cpll_gpll_p, 0,
+ RK3368_CLKSEL_CON(43), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3368_CLKGATE_CON(3), 4, GFLAGS),
+ MUX(SCLK_MAC, "mac_clk", mux_mac_p, CLK_SET_RATE_PARENT,
+ RK3368_CLKSEL_CON(43), 8, 1, MFLAGS),
+ GATE(SCLK_MACREF_OUT, "sclk_macref_out", "mac_clk", 0,
+ RK3368_CLKGATE_CON(7), 7, GFLAGS),
+ GATE(SCLK_MACREF, "sclk_macref", "mac_clk", 0,
+ RK3368_CLKGATE_CON(7), 6, GFLAGS),
+ GATE(SCLK_MAC_RX, "sclk_mac_rx", "mac_clk", 0,
+ RK3368_CLKGATE_CON(7), 4, GFLAGS),
+ GATE(SCLK_MAC_TX, "sclk_mac_tx", "mac_clk", 0,
+ RK3368_CLKGATE_CON(7), 5, GFLAGS),
+
+ GATE(0, "jtag", "ext_jtag", 0,
+ RK3368_CLKGATE_CON(7), 0, GFLAGS),
+
+ COMPOSITE_NODIV(0, "hsic_usbphy_480m", mux_hsic_usbphy480m_p, 0,
+ RK3368_CLKSEL_CON(26), 8, 2, MFLAGS,
+ RK3368_CLKGATE_CON(8), 0, GFLAGS),
+ COMPOSITE_NODIV(SCLK_HSICPHY480M, "sclk_hsicphy480m", mux_hsicphy480m_p, 0,
+ RK3368_CLKSEL_CON(26), 12, 2, MFLAGS,
+ RK3368_CLKGATE_CON(8), 7, GFLAGS),
+ GATE(SCLK_HSICPHY12M, "sclk_hsicphy12m", "xin12m", 0,
+ RK3368_CLKGATE_CON(8), 6, GFLAGS),
+
+ /*
+ * Clock-Architecture Diagram 5
+ */
+
+ /* aclk_cci_pre gates */
+ GATE(0, "aclk_core_niu_cpup", "aclk_cci_pre", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(11), 4, GFLAGS),
+ GATE(0, "aclk_core_niu_cci", "aclk_cci_pre", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(11), 3, GFLAGS),
+ GATE(0, "aclk_cci400", "aclk_cci_pre", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(11), 2, GFLAGS),
+ GATE(0, "aclk_adb400m_pd_core_b", "aclk_cci_pre", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(11), 1, GFLAGS),
+ GATE(0, "aclk_adb400m_pd_core_l", "aclk_cci_pre", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(11), 0, GFLAGS),
+
+ /* aclkm_core_* gates */
+ GATE(0, "aclk_adb400s_pd_core_b", "aclkm_core_b", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(10), 0, GFLAGS),
+ GATE(0, "aclk_adb400s_pd_core_l", "aclkm_core_l", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(9), 0, GFLAGS),
+
+ /* armclk* gates */
+ GATE(0, "sclk_dbg_pd_core_b", "armclkb", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(10), 1, GFLAGS),
+ GATE(0, "sclk_dbg_pd_core_l", "armclkl", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(9), 1, GFLAGS),
+
+ /* sclk_cs_pre gates */
+ GATE(0, "sclk_dbg", "sclk_cs_pre", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(11), 7, GFLAGS),
+ GATE(0, "pclk_core_niu_sdbg", "sclk_cs_pre", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(11), 6, GFLAGS),
+ GATE(0, "hclk_core_niu_dbg", "sclk_cs_pre", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(11), 5, GFLAGS),
+
+ /* aclk_bus gates */
+ GATE(0, "aclk_strc_sys", "aclk_bus", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(12), 12, GFLAGS),
+ GATE(ACLK_DMAC_BUS, "aclk_dmac_bus", "aclk_bus", 0, RK3368_CLKGATE_CON(12), 11, GFLAGS),
+ GATE(0, "sclk_intmem1", "aclk_bus", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(12), 6, GFLAGS),
+ GATE(0, "sclk_intmem0", "aclk_bus", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(12), 5, GFLAGS),
+ GATE(0, "aclk_intmem", "aclk_bus", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(12), 4, GFLAGS),
+ GATE(0, "aclk_gic400", "aclk_bus", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(13), 9, GFLAGS),
+
+ /* sclk_ddr gates */
+ GATE(0, "nclk_ddrupctl", "sclk_ddr", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(13), 2, GFLAGS),
+
+ /* clk_hsadc_tsp is part of diagram2 */
+
+ /* fclk_mcu_src gates */
+ GATE(0, "hclk_noc_mcu", "fclk_mcu_src", 0, RK3368_CLKGATE_CON(13), 14, GFLAGS),
+ GATE(0, "fclk_mcu", "fclk_mcu_src", 0, RK3368_CLKGATE_CON(13), 12, GFLAGS),
+ GATE(0, "hclk_mcu", "fclk_mcu_src", 0, RK3368_CLKGATE_CON(13), 11, GFLAGS),
+
+ /* hclk_cpu gates */
+ GATE(HCLK_SPDIF, "hclk_spdif", "hclk_bus", 0, RK3368_CLKGATE_CON(12), 10, GFLAGS),
+ GATE(HCLK_ROM, "hclk_rom", "hclk_bus", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(12), 9, GFLAGS),
+ GATE(HCLK_I2S_2CH, "hclk_i2s_2ch", "hclk_bus", 0, RK3368_CLKGATE_CON(12), 8, GFLAGS),
+ GATE(HCLK_I2S_8CH, "hclk_i2s_8ch", "hclk_bus", 0, RK3368_CLKGATE_CON(12), 7, GFLAGS),
+ GATE(HCLK_TSP, "hclk_tsp", "hclk_bus", 0, RK3368_CLKGATE_CON(13), 10, GFLAGS),
+ GATE(HCLK_CRYPTO, "hclk_crypto", "hclk_bus", 0, RK3368_CLKGATE_CON(13), 4, GFLAGS),
+ GATE(MCLK_CRYPTO, "mclk_crypto", "hclk_bus", 0, RK3368_CLKGATE_CON(13), 3, GFLAGS),
+
+ /* pclk_cpu gates */
+ GATE(PCLK_DDRPHY, "pclk_ddrphy", "pclk_bus", 0, RK3368_CLKGATE_CON(12), 14, GFLAGS),
+ GATE(PCLK_DDRUPCTL, "pclk_ddrupctl", "pclk_bus", 0, RK3368_CLKGATE_CON(12), 13, GFLAGS),
+ GATE(PCLK_I2C1, "pclk_i2c1", "pclk_bus", 0, RK3368_CLKGATE_CON(12), 3, GFLAGS),
+ GATE(PCLK_I2C0, "pclk_i2c0", "pclk_bus", 0, RK3368_CLKGATE_CON(12), 2, GFLAGS),
+ GATE(PCLK_MAILBOX, "pclk_mailbox", "pclk_bus", 0, RK3368_CLKGATE_CON(12), 1, GFLAGS),
+ GATE(PCLK_PWM0, "pclk_pwm0", "pclk_bus", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(12), 0, GFLAGS),
+ GATE(PCLK_SIM, "pclk_sim", "pclk_bus", 0, RK3368_CLKGATE_CON(13), 8, GFLAGS),
+ GATE(PCLK_PWM1, "pclk_pwm1", "pclk_bus", 0, RK3368_CLKGATE_CON(13), 6, GFLAGS),
+ GATE(PCLK_UART2, "pclk_uart2", "pclk_bus", 0, RK3368_CLKGATE_CON(13), 5, GFLAGS),
+ GATE(0, "pclk_efuse_256", "pclk_bus", 0, RK3368_CLKGATE_CON(13), 1, GFLAGS),
+ GATE(0, "pclk_efuse_1024", "pclk_bus", 0, RK3368_CLKGATE_CON(13), 0, GFLAGS),
+
+ /*
+ * video clk gates
+ * aclk_video(_pre) can actually select between parents of aclk_vdpu
+ * and aclk_vepu by setting bit GRF_SOC_CON0[7].
+ */
+ GATE(ACLK_VIDEO, "aclk_video", "aclk_vdpu", 0, RK3368_CLKGATE_CON(15), 0, GFLAGS),
+ GATE(SCLK_HEVC_CABAC, "sclk_hevc_cabac", "sclk_hevc_cabac_src", 0, RK3368_CLKGATE_CON(15), 3, GFLAGS),
+ GATE(SCLK_HEVC_CORE, "sclk_hevc_core", "sclk_hevc_core_src", 0, RK3368_CLKGATE_CON(15), 2, GFLAGS),
+ GATE(HCLK_VIDEO, "hclk_video", "hclk_video_pre", 0, RK3368_CLKGATE_CON(15), 1, GFLAGS),
+
+ /* aclk_rga_pre gates */
+ GATE(ACLK_VIO1_NOC, "aclk_vio1_noc", "aclk_rga_pre", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(16), 10, GFLAGS),
+ GATE(ACLK_RGA, "aclk_rga", "aclk_rga_pre", 0, RK3368_CLKGATE_CON(16), 0, GFLAGS),
+ GATE(ACLK_HDCP, "aclk_hdcp", "aclk_rga_pre", 0, RK3368_CLKGATE_CON(17), 10, GFLAGS),
+
+ /* aclk_vio0 gates */
+ GATE(ACLK_VIP, "aclk_vip", "aclk_vio0", 0, RK3368_CLKGATE_CON(16), 11, GFLAGS),
+ GATE(ACLK_VIO0_NOC, "aclk_vio0_noc", "aclk_vio0", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(16), 9, GFLAGS),
+ GATE(ACLK_VOP, "aclk_vop", "aclk_vio0", 0, RK3368_CLKGATE_CON(16), 5, GFLAGS),
+ GATE(ACLK_VOP_IEP, "aclk_vop_iep", "aclk_vio0", 0, RK3368_CLKGATE_CON(16), 4, GFLAGS),
+ GATE(ACLK_IEP, "aclk_iep", "aclk_vio0", 0, RK3368_CLKGATE_CON(16), 2, GFLAGS),
+
+ /* sclk_isp gates */
+ GATE(HCLK_ISP, "hclk_isp", "sclk_isp", 0, RK3368_CLKGATE_CON(16), 14, GFLAGS),
+ GATE(ACLK_ISP, "aclk_isp", "sclk_isp", 0, RK3368_CLKGATE_CON(17), 0, GFLAGS),
+
+ /* hclk_vio gates */
+ GATE(HCLK_VIP, "hclk_vip", "hclk_vio", 0, RK3368_CLKGATE_CON(16), 12, GFLAGS),
+ GATE(HCLK_VIO_NOC, "hclk_vio_noc", "hclk_vio", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(16), 8, GFLAGS),
+ GATE(HCLK_VIO_AHB_ARBI, "hclk_vio_ahb_arbi", "hclk_vio", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(16), 7, GFLAGS),
+ GATE(HCLK_VOP, "hclk_vop", "hclk_vio", 0, RK3368_CLKGATE_CON(16), 6, GFLAGS),
+ GATE(HCLK_IEP, "hclk_iep", "hclk_vio", 0, RK3368_CLKGATE_CON(16), 3, GFLAGS),
+ GATE(HCLK_RGA, "hclk_rga", "hclk_vio", 0, RK3368_CLKGATE_CON(16), 1, GFLAGS),
+ GATE(HCLK_VIO_HDCPMMU, "hclk_hdcpmmu", "hclk_vio", 0, RK3368_CLKGATE_CON(17), 12, GFLAGS),
+ GATE(HCLK_VIO_H2P, "hclk_vio_h2p", "hclk_vio", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(17), 7, GFLAGS),
+
+ /*
+ * pclk_vio gates
+ * pclk_vio comes from the exactly same source as hclk_vio
+ */
+ GATE(PCLK_HDCP, "pclk_hdcp", "hclk_vio", 0, RK3368_CLKGATE_CON(17), 11, GFLAGS),
+ GATE(PCLK_EDP_CTRL, "pclk_edp_ctrl", "hclk_vio", 0, RK3368_CLKGATE_CON(17), 9, GFLAGS),
+ GATE(PCLK_VIO_H2P, "pclk_vio_h2p", "hclk_vio", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(17), 8, GFLAGS),
+ GATE(PCLK_HDMI_CTRL, "pclk_hdmi_ctrl", "hclk_vio", 0, RK3368_CLKGATE_CON(17), 6, GFLAGS),
+ GATE(PCLK_MIPI_CSI, "pclk_mipi_csi", "hclk_vio", 0, RK3368_CLKGATE_CON(17), 4, GFLAGS),
+ GATE(PCLK_MIPI_DSI0, "pclk_mipi_dsi0", "hclk_vio", 0, RK3368_CLKGATE_CON(17), 3, GFLAGS),
+
+ /* ext_vip gates in diagram3 */
+
+ /* gpu gates */
+ GATE(SCLK_GPU_CORE, "sclk_gpu_core", "sclk_gpu_core_src", 0, RK3368_CLKGATE_CON(18), 2, GFLAGS),
+ GATE(ACLK_GPU_MEM, "aclk_gpu_mem", "aclk_gpu_mem_pre", 0, RK3368_CLKGATE_CON(18), 1, GFLAGS),
+ GATE(ACLK_GPU_CFG, "aclk_gpu_cfg", "aclk_gpu_cfg_pre", 0, RK3368_CLKGATE_CON(18), 0, GFLAGS),
+
+ /* aclk_peri gates */
+ GATE(ACLK_DMAC_PERI, "aclk_dmac_peri", "aclk_peri", 0, RK3368_CLKGATE_CON(19), 3, GFLAGS),
+ GATE(0, "aclk_peri_axi_matrix", "aclk_peri", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(19), 2, GFLAGS),
+ GATE(HCLK_SFC, "hclk_sfc", "aclk_peri", 0, RK3368_CLKGATE_CON(20), 15, GFLAGS),
+ GATE(ACLK_GMAC, "aclk_gmac", "aclk_peri", 0, RK3368_CLKGATE_CON(20), 13, GFLAGS),
+ GATE(0, "aclk_peri_niu", "aclk_peri", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(20), 8, GFLAGS),
+ GATE(ACLK_PERI_MMU, "aclk_peri_mmu", "aclk_peri", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(21), 4, GFLAGS),
+
+ /* hclk_peri gates */
+ GATE(0, "hclk_peri_axi_matrix", "hclk_peri", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(19), 0, GFLAGS),
+ GATE(HCLK_NANDC0, "hclk_nandc0", "hclk_peri", 0, RK3368_CLKGATE_CON(20), 11, GFLAGS),
+ GATE(0, "hclk_mmc_peri", "hclk_peri", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(20), 10, GFLAGS),
+ GATE(0, "hclk_emem_peri", "hclk_peri", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(20), 9, GFLAGS),
+ GATE(0, "hclk_peri_ahb_arbi", "hclk_peri", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(20), 7, GFLAGS),
+ GATE(0, "hclk_usb_peri", "hclk_peri", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(20), 6, GFLAGS),
+ GATE(HCLK_HSIC, "hclk_hsic", "hclk_peri", 0, RK3368_CLKGATE_CON(20), 5, GFLAGS),
+ GATE(HCLK_HOST1, "hclk_host1", "hclk_peri", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(20), 4, GFLAGS),
+ GATE(HCLK_HOST0, "hclk_host0", "hclk_peri", 0, RK3368_CLKGATE_CON(20), 3, GFLAGS),
+ GATE(0, "pmu_hclk_otg0", "hclk_peri", 0, RK3368_CLKGATE_CON(20), 2, GFLAGS),
+ GATE(HCLK_OTG0, "hclk_otg0", "hclk_peri", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(20), 1, GFLAGS),
+ GATE(HCLK_HSADC, "hclk_hsadc", "hclk_peri", 0, RK3368_CLKGATE_CON(21), 3, GFLAGS),
+ GATE(HCLK_EMMC, "hclk_emmc", "hclk_peri", 0, RK3368_CLKGATE_CON(21), 2, GFLAGS),
+ GATE(HCLK_SDIO0, "hclk_sdio0", "hclk_peri", 0, RK3368_CLKGATE_CON(21), 1, GFLAGS),
+ GATE(HCLK_SDMMC, "hclk_sdmmc", "hclk_peri", 0, RK3368_CLKGATE_CON(21), 0, GFLAGS),
+
+ /* pclk_peri gates */
+ GATE(PCLK_SARADC, "pclk_saradc", "pclk_peri", 0, RK3368_CLKGATE_CON(19), 15, GFLAGS),
+ GATE(PCLK_I2C5, "pclk_i2c5", "pclk_peri", 0, RK3368_CLKGATE_CON(19), 14, GFLAGS),
+ GATE(PCLK_I2C4, "pclk_i2c4", "pclk_peri", 0, RK3368_CLKGATE_CON(19), 13, GFLAGS),
+ GATE(PCLK_I2C3, "pclk_i2c3", "pclk_peri", 0, RK3368_CLKGATE_CON(19), 12, GFLAGS),
+ GATE(PCLK_I2C2, "pclk_i2c2", "pclk_peri", 0, RK3368_CLKGATE_CON(19), 11, GFLAGS),
+ GATE(PCLK_UART4, "pclk_uart4", "pclk_peri", 0, RK3368_CLKGATE_CON(19), 10, GFLAGS),
+ GATE(PCLK_UART3, "pclk_uart3", "pclk_peri", 0, RK3368_CLKGATE_CON(19), 9, GFLAGS),
+ GATE(PCLK_UART1, "pclk_uart1", "pclk_peri", 0, RK3368_CLKGATE_CON(19), 8, GFLAGS),
+ GATE(PCLK_UART0, "pclk_uart0", "pclk_peri", 0, RK3368_CLKGATE_CON(19), 7, GFLAGS),
+ GATE(PCLK_SPI2, "pclk_spi2", "pclk_peri", 0, RK3368_CLKGATE_CON(19), 6, GFLAGS),
+ GATE(PCLK_SPI1, "pclk_spi1", "pclk_peri", 0, RK3368_CLKGATE_CON(19), 5, GFLAGS),
+ GATE(PCLK_SPI0, "pclk_spi0", "pclk_peri", 0, RK3368_CLKGATE_CON(19), 4, GFLAGS),
+ GATE(0, "pclk_peri_axi_matrix", "pclk_peri", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(19), 1, GFLAGS),
+ GATE(PCLK_GMAC, "pclk_gmac", "pclk_peri", 0, RK3368_CLKGATE_CON(20), 14, GFLAGS),
+ GATE(PCLK_TSADC, "pclk_tsadc", "pclk_peri", 0, RK3368_CLKGATE_CON(20), 0, GFLAGS),
+
+ /* pclk_pd_alive gates */
+ GATE(PCLK_TIMER1, "pclk_timer1", "pclk_pd_alive", 0, RK3368_CLKGATE_CON(14), 8, GFLAGS),
+ GATE(PCLK_TIMER0, "pclk_timer0", "pclk_pd_alive", 0, RK3368_CLKGATE_CON(14), 7, GFLAGS),
+ GATE(0, "pclk_alive_niu", "pclk_pd_alive", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(14), 12, GFLAGS),
+ GATE(PCLK_GRF, "pclk_grf", "pclk_pd_alive", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(14), 11, GFLAGS),
+ GATE(PCLK_GPIO3, "pclk_gpio3", "pclk_pd_alive", 0, RK3368_CLKGATE_CON(14), 3, GFLAGS),
+ GATE(PCLK_GPIO2, "pclk_gpio2", "pclk_pd_alive", 0, RK3368_CLKGATE_CON(14), 2, GFLAGS),
+ GATE(PCLK_GPIO1, "pclk_gpio1", "pclk_pd_alive", 0, RK3368_CLKGATE_CON(14), 1, GFLAGS),
+
+ /*
+ * pclk_vio gates
+ * pclk_vio comes from the exactly same source as hclk_vio
+ */
+ GATE(0, "pclk_dphyrx", "hclk_vio", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(14), 8, GFLAGS),
+ GATE(0, "pclk_dphytx", "hclk_vio", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(14), 8, GFLAGS),
+
+ /* pclk_pd_pmu gates */
+ GATE(PCLK_PMUGRF, "pclk_pmugrf", "pclk_pd_pmu", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(17), 0, GFLAGS),
+ GATE(PCLK_GPIO0, "pclk_gpio0", "pclk_pd_pmu", 0, RK3368_CLKGATE_CON(17), 4, GFLAGS),
+ GATE(PCLK_SGRF, "pclk_sgrf", "pclk_pd_pmu", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(17), 3, GFLAGS),
+ GATE(0, "pclk_pmu_noc", "pclk_pd_pmu", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(17), 2, GFLAGS),
+ GATE(0, "pclk_intmem1", "pclk_pd_pmu", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(17), 1, GFLAGS),
+ GATE(PCLK_PMU, "pclk_pmu", "pclk_pd_pmu", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(17), 2, GFLAGS),
+
+ /* timer gates */
+ GATE(0, "sclk_timer15", "xin24m", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(24), 11, GFLAGS),
+ GATE(0, "sclk_timer14", "xin24m", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(24), 10, GFLAGS),
+ GATE(0, "sclk_timer13", "xin24m", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(24), 9, GFLAGS),
+ GATE(0, "sclk_timer12", "xin24m", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(24), 8, GFLAGS),
+ GATE(0, "sclk_timer11", "xin24m", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(24), 7, GFLAGS),
+ GATE(0, "sclk_timer10", "xin24m", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(24), 6, GFLAGS),
+ GATE(0, "sclk_timer05", "xin24m", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(24), 5, GFLAGS),
+ GATE(0, "sclk_timer04", "xin24m", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(24), 4, GFLAGS),
+ GATE(0, "sclk_timer03", "xin24m", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(24), 3, GFLAGS),
+ GATE(0, "sclk_timer02", "xin24m", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(24), 2, GFLAGS),
+ GATE(0, "sclk_timer01", "xin24m", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(24), 1, GFLAGS),
+ GATE(0, "sclk_timer00", "xin24m", CLK_IGNORE_UNUSED, RK3368_CLKGATE_CON(24), 0, GFLAGS),
+};
+
+static void __init rk3368_clk_init(struct device_node *np)
+{
+ void __iomem *reg_base;
+ struct clk *clk;
+
+ reg_base = of_iomap(np, 0);
+ if (!reg_base) {
+ pr_err("%s: could not map cru region\n", __func__);
+ return;
+ }
+
+ rockchip_clk_init(np, reg_base, CLK_NR_CLKS);
+
+ /* xin12m is created by a cru-internal divider */
+ clk = clk_register_fixed_factor(NULL, "xin12m", "xin24m", 0, 1, 2);
+ if (IS_ERR(clk))
+ pr_warn("%s: could not register clock xin12m: %ld\n",
+ __func__, PTR_ERR(clk));
+
+ /* ddrphy_div4 is created by a cru-internal divider */
+ clk = clk_register_fixed_factor(NULL, "ddrphy_div4", "ddrphy_src", 0, 1, 4);
+ if (IS_ERR(clk))
+ pr_warn("%s: could not register clock xin12m: %ld\n",
+ __func__, PTR_ERR(clk));
+
+ clk = clk_register_fixed_factor(NULL, "hclk_video_pre",
+ "hclk_video_pre_v", 0, 1, 4);
+ if (IS_ERR(clk))
+ pr_warn("%s: could not register clock hclk_vcodec_pre: %ld\n",
+ __func__, PTR_ERR(clk));
+
+ /* Watchdog pclk is controlled by sgrf_soc_con3[7]. */
+ clk = clk_register_fixed_factor(NULL, "pclk_wdt", "pclk_pd_alive", 0, 1, 1);
+ if (IS_ERR(clk))
+ pr_warn("%s: could not register clock pclk_wdt: %ld\n",
+ __func__, PTR_ERR(clk));
+ else
+ rockchip_clk_add_lookup(clk, PCLK_WDT);
+
+ rockchip_clk_register_plls(rk3368_pll_clks,
+ ARRAY_SIZE(rk3368_pll_clks),
+ RK3368_GRF_SOC_STATUS0);
+ rockchip_clk_register_branches(rk3368_clk_branches,
+ ARRAY_SIZE(rk3368_clk_branches));
+
+ rockchip_clk_register_armclk(ARMCLKB, "armclkb",
+ mux_armclkb_p, ARRAY_SIZE(mux_armclkb_p),
+ &rk3368_cpuclkb_data, rk3368_cpuclkb_rates,
+ ARRAY_SIZE(rk3368_cpuclkb_rates));
+
+ rockchip_clk_register_armclk(ARMCLKL, "armclkl",
+ mux_armclkl_p, ARRAY_SIZE(mux_armclkl_p),
+ &rk3368_cpuclkl_data, rk3368_cpuclkl_rates,
+ ARRAY_SIZE(rk3368_cpuclkl_rates));
+
+ rockchip_register_softrst(np, 15, reg_base + RK3368_SOFTRST_CON(0),
+ ROCKCHIP_SOFTRST_HIWORD_MASK);
+
+ rockchip_register_restart_notifier(RK3368_GLB_SRST_FST);
+}
+CLK_OF_DECLARE(rk3368_cru, "rockchip,rk3368-cru", rk3368_clk_init);
list->div_shift
);
break;
+ case branch_inverter:
+ clk = rockchip_clk_register_inverter(
+ list->name, list->parent_names,
+ list->num_parents,
+ reg_base + list->muxdiv_offset,
+ list->div_shift, list->div_flags, &clk_lock);
+ break;
}
/* none of the cases above matched */
#define CLK_ROCKCHIP_CLK_H
#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
+
+struct clk;
#define HIWORD_UPDATE(val, mask, shift) \
((val) << (shift) | (mask) << ((shift) + 16))
/* register positions shared by RK2928, RK3066 and RK3188 */
-#define RK2928_PLL_CON(x) (x * 0x4)
+#define RK2928_PLL_CON(x) ((x) * 0x4)
#define RK2928_MODE_CON 0x40
-#define RK2928_CLKSEL_CON(x) (x * 0x4 + 0x44)
-#define RK2928_CLKGATE_CON(x) (x * 0x4 + 0xd0)
+#define RK2928_CLKSEL_CON(x) ((x) * 0x4 + 0x44)
+#define RK2928_CLKGATE_CON(x) ((x) * 0x4 + 0xd0)
#define RK2928_GLB_SRST_FST 0x100
#define RK2928_GLB_SRST_SND 0x104
-#define RK2928_SOFTRST_CON(x) (x * 0x4 + 0x110)
+#define RK2928_SOFTRST_CON(x) ((x) * 0x4 + 0x110)
#define RK2928_MISC_CON 0x134
#define RK3288_PLL_CON(x) RK2928_PLL_CON(x)
#define RK3288_MODE_CON 0x50
-#define RK3288_CLKSEL_CON(x) (x * 0x4 + 0x60)
-#define RK3288_CLKGATE_CON(x) (x * 0x4 + 0x160)
+#define RK3288_CLKSEL_CON(x) ((x) * 0x4 + 0x60)
+#define RK3288_CLKGATE_CON(x) ((x) * 0x4 + 0x160)
#define RK3288_GLB_SRST_FST 0x1b0
#define RK3288_GLB_SRST_SND 0x1b4
-#define RK3288_SOFTRST_CON(x) (x * 0x4 + 0x1b8)
+#define RK3288_SOFTRST_CON(x) ((x) * 0x4 + 0x1b8)
#define RK3288_MISC_CON 0x1e8
#define RK3288_SDMMC_CON0 0x200
#define RK3288_SDMMC_CON1 0x204
#define RK3288_EMMC_CON0 0x218
#define RK3288_EMMC_CON1 0x21c
+#define RK3368_PLL_CON(x) RK2928_PLL_CON(x)
+#define RK3368_CLKSEL_CON(x) ((x) * 0x4 + 0x100)
+#define RK3368_CLKGATE_CON(x) ((x) * 0x4 + 0x200)
+#define RK3368_GLB_SRST_FST 0x280
+#define RK3368_GLB_SRST_SND 0x284
+#define RK3368_SOFTRST_CON(x) ((x) * 0x4 + 0x300)
+#define RK3368_MISC_CON 0x380
+#define RK3368_SDMMC_CON0 0x400
+#define RK3368_SDMMC_CON1 0x404
+#define RK3368_SDIO0_CON0 0x408
+#define RK3368_SDIO0_CON1 0x40c
+#define RK3368_SDIO1_CON0 0x410
+#define RK3368_SDIO1_CON1 0x414
+#define RK3368_EMMC_CON0 0x418
+#define RK3368_EMMC_CON1 0x41c
+
enum rockchip_pll_type {
pll_rk3066,
};
.nr = _nr, \
.nf = _nf, \
.no = _no, \
- .bwadj = (_nf >> 1), \
+ .nb = ((_nf) < 2) ? 1 : (_nf) >> 1, \
}
-#define RK3066_PLL_RATE_BWADJ(_rate, _nr, _nf, _no, _bw) \
+#define RK3066_PLL_RATE_NB(_rate, _nr, _nf, _no, _nb) \
{ \
.rate = _rate##U, \
.nr = _nr, \
.nf = _nf, \
.no = _no, \
- .bwadj = _bw, \
+ .nb = _nb, \
}
struct rockchip_pll_rate_table {
unsigned int nr;
unsigned int nf;
unsigned int no;
- unsigned int bwadj;
+ unsigned int nb;
};
/**
const char *const *parent_names, u8 num_parents,
void __iomem *reg, int shift);
+#define ROCKCHIP_INVERTER_HIWORD_MASK BIT(0)
+
+struct clk *rockchip_clk_register_inverter(const char *name,
+ const char *const *parent_names, u8 num_parents,
+ void __iomem *reg, int shift, int flags,
+ spinlock_t *lock);
+
#define PNAME(x) static const char *const x[] __initconst
enum rockchip_clk_branch_type {
branch_fraction_divider,
branch_gate,
branch_mmc,
+ branch_inverter,
};
struct rockchip_clk_branch {
.gate_offset = -1, \
}
+#define COMPOSITE_NOGATE_DIVTBL(_id, cname, pnames, f, mo, ms, \
+ mw, mf, ds, dw, df, dt) \
+ { \
+ .id = _id, \
+ .branch_type = branch_composite, \
+ .name = cname, \
+ .parent_names = pnames, \
+ .num_parents = ARRAY_SIZE(pnames), \
+ .flags = f, \
+ .muxdiv_offset = mo, \
+ .mux_shift = ms, \
+ .mux_width = mw, \
+ .mux_flags = mf, \
+ .div_shift = ds, \
+ .div_width = dw, \
+ .div_flags = df, \
+ .div_table = dt, \
+ .gate_offset = -1, \
+ }
+
#define COMPOSITE_FRAC(_id, cname, pname, f, mo, df, go, gs, gf)\
{ \
.id = _id, \
.div_shift = shift, \
}
+#define INVERTER(_id, cname, pname, io, is, if) \
+ { \
+ .id = _id, \
+ .branch_type = branch_inverter, \
+ .name = cname, \
+ .parent_names = (const char *[]){ pname }, \
+ .num_parents = 1, \
+ .muxdiv_offset = io, \
+ .div_shift = is, \
+ .div_flags = if, \
+ }
+
void rockchip_clk_init(struct device_node *np, void __iomem *base,
unsigned long nr_clks);
struct regmap *rockchip_clk_get_grf(void);
*/
#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include "clk-cpu.h"
#define E4210_SRC_CPU 0x0
* Common Clock Framework support for Audio Subsystem Clock Controller.
*/
-#include <linux/clkdev.h>
+#include <linux/slab.h>
#include <linux/io.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/of_address.h>
#include <linux/syscore_ops.h>
* Clock driver for Exynos clock output
*/
+#include <linux/slab.h>
#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
* Common Clock Framework support for Exynos3250 SoC.
*/
-#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
*/
#include <dt-bindings/clock/exynos4.h>
+#include <linux/slab.h>
#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
* Common Clock Framework support for Exynos4415 SoC.
*/
-#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
*/
#include <dt-bindings/clock/exynos5250.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
* Common Clock Framework support for Exynos5260 SoC.
*/
-#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <dt-bindings/clock/exynos5410.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
*/
#include <dt-bindings/clock/exynos5420.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
+#include <linux/slab.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
* Common Clock Framework support for Exynos5443 SoC.
*/
-#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
*/
#include <dt-bindings/clock/exynos5440.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
*
*/
-#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/errno.h>
#include <linux/hrtimer.h>
#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/clkdev.h>
#include "clk.h"
#include "clk-pll.h"
* Common Clock Framework support for s3c24xx external clock output.
*/
+#include <linux/clkdev.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include "clk.h"
* Common Clock Framework support for S3C2410 and following SoCs.
*/
-#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
* Common Clock Framework support for S3C2412 and S3C2413.
*/
-#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
* Common Clock Framework support for S3C2443 and following SoCs.
*/
-#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
* Common Clock Framework support for all S3C64xx SoCs.
*/
-#include <linux/clk.h>
-#include <linux/clkdev.h>
+#include <linux/slab.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
* Driver for Audio Subsystem Clock Controller of S5PV210-compatible SoCs.
*/
-#include <linux/clkdev.h>
#include <linux/io.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/of_address.h>
#include <linux/syscore_ops.h>
* Common Clock Framework support for all S5PC110/S5PV210 SoCs.
*/
-#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
* clock framework for Samsung platforms.
*/
+#include <linux/slab.h>
+#include <linux/clkdev.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/of_address.h>
#include <linux/syscore_ops.h>
#ifndef __SAMSUNG_CLK_H
#define __SAMSUNG_CLK_H
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include "clk-pll.h"
+struct clk;
+
/**
* struct samsung_clk_provider: information about clock provider
* @reg_base: virtual address for the register base.
*/
#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/slab.h>
#define CPG_DIV6_CKSTP BIT(8)
#define CPG_DIV6_DIV(d) ((d) & 0x3f)
*/
#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
#include <linux/clk/shmobile.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/spinlock.h>
*/
#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
#include <linux/clk/shmobile.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/spinlock.h>
*/
#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
#include <linux/clk/shmobile.h>
#include <linux/of_address.h>
+#include <linux/slab.h>
struct r8a7778_cpg {
struct clk_onecell_data data;
*/
#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
#include <linux/clk/shmobile.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <dt-bindings/clock/r8a7779-clock.h>
*/
#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
#include <linux/clk/shmobile.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/math64.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
struct rcar_gen2_cpg {
*/
#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
#include <linux/clk/shmobile.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
struct sh73a0_cpg {
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/io.h>
-#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/of_address.h>
* Licensed under GPLv2 or later.
*/
+#include <linux/clk.h>
+
#define KHZ 1000
#define MHZ (KHZ * KHZ)
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/io.h>
-#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/of_address.h>
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/slab.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/mfd/syscon.h>
div = socfpgaclk->fixed_div;
else if (socfpgaclk->div_reg) {
val = readl(socfpgaclk->div_reg) >> socfpgaclk->shift;
- val &= div_mask(socfpgaclk->width);
+ val &= GENMASK(socfpgaclk->width - 1, 0);
div = (1 << val);
}
* Based from clk-highbank.c
*
*/
-#include <linux/clk.h>
-#include <linux/clkdev.h>
+#include <linux/slab.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/mfd/syscon.h>
div = socfpgaclk->fixed_div;
else if (socfpgaclk->div_reg) {
val = readl(socfpgaclk->div_reg) >> socfpgaclk->shift;
- val &= div_mask(socfpgaclk->width);
+ val &= GENMASK(socfpgaclk->width - 1, 0);
/* Check for GPIO_DB_CLK by its offset */
if ((int) socfpgaclk->div_reg & SOCFPGA_GPIO_DB_CLK_OFFSET)
div = val + 1;
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/slab.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/of.h>
div = socfpgaclk->fixed_div;
} else if (socfpgaclk->div_reg) {
div = readl(socfpgaclk->div_reg) >> socfpgaclk->shift;
- div &= div_mask(socfpgaclk->width);
+ div &= GENMASK(socfpgaclk->width - 1, 0);
div += 1;
} else {
div = ((readl(socfpgaclk->hw.reg) & 0x7ff) + 1);
* Based from clk-highbank.c
*
*/
-#include <linux/clk.h>
-#include <linux/clkdev.h>
+#include <linux/slab.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/of.h>
} else {
if (socfpgaclk->div_reg) {
val = readl(socfpgaclk->div_reg) >> socfpgaclk->shift;
- val &= div_mask(socfpgaclk->width);
+ val &= GENMASK(socfpgaclk->width - 1, 0);
parent_rate /= (val + 1);
}
div = ((readl(socfpgaclk->hw.reg) & 0x1ff) + 1);
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/slab.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/of.h>
* Based from clk-highbank.c
*
*/
-#include <linux/clk.h>
-#include <linux/clkdev.h>
+#include <linux/slab.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/of.h>
#define __SOCFPGA_CLK_H
#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
/* Clock Manager offsets */
#define CLKMGR_CTRL 0x0
#define CLKMGR_PERPLL_SRC 0xAC
#define SOCFPGA_MAX_PARENTS 5
-#define div_mask(width) ((1 << (width)) - 1)
#define streq(a, b) (strcmp((a), (b)) == 0)
#define SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel) \
* warranty of any kind, whether express or implied.
*/
-#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/err.h>
#include <linux/io.h>
* warranty of any kind, whether express or implied.
*/
-#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/err.h>
#include <linux/io.h>
* warranty of any kind, whether express or implied.
*/
-#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/io.h>
#include <linux/spinlock_types.h>
* Author: Maxime Coquelin <maxime.coquelin@st.com> for ST-Microelectronics.
* License terms: GNU General Public License (GPL), version 2 */
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/module.h>
#include <linux/slab.h>
init.name = name;
init.ops = &flexgen_ops;
- init.flags = CLK_IS_BASIC | flexgen_flags;
+ init.flags = CLK_IS_BASIC | CLK_GET_RATE_NOCACHE | flexgen_flags;
init.parent_names = parent_names;
init.num_parents = num_parents;
int *num_parents)
{
const char **parents;
- int nparents, i;
+ int nparents;
nparents = of_clk_get_parent_count(np);
if (WARN_ON(nparents <= 0))
if (!parents)
return NULL;
- for (i = 0; i < nparents; i++)
- parents[i] = of_clk_get_parent_name(np, i);
+ *num_parents = of_clk_parent_fill(np, parents, nparents);
- *num_parents = nparents;
return parents;
}
if (!rlock)
goto err;
+ spin_lock_init(rlock);
+
for (i = 0; i < clk_data->clk_num; i++) {
struct clk *clk;
const char *clk_name;
#include <linux/slab.h>
#include <linux/of_address.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include "clkgen.h"
CLKGEN_FIELD(0x30c, 0xf, 20),
CLKGEN_FIELD(0x310, 0xf, 20) },
.lockstatus_present = true,
- .lock_status = CLKGEN_FIELD(0x2A0, 0x1, 24),
+ .lock_status = CLKGEN_FIELD(0x2f0, 0x1, 24),
.powerup_polarity = 1,
.standby_polarity = 1,
.pll_ops = &st_quadfs_pll_c32_ops,
struct st_clk_quadfs_pll *pll = to_quadfs_pll(hw);
u32 npda = CLKGEN_READ(pll, npda);
- return !!npda;
+ return pll->data->powerup_polarity ? !npda : !!npda;
}
static int clk_fs660c32_vco_get_rate(unsigned long input, struct stm_fs *fs,
init.name = name;
init.ops = quadfs->pll_ops;
- init.flags = CLK_IS_BASIC;
+ init.flags = CLK_IS_BASIC | CLK_GET_RATE_NOCACHE;
init.parent_names = &parent_name;
init.num_parents = 1;
if (fs->lock)
spin_lock_irqsave(fs->lock, flags);
- CLKGEN_WRITE(fs, nsb[fs->chan], !fs->data->standby_polarity);
+ CLKGEN_WRITE(fs, nsb[fs->chan], fs->data->standby_polarity);
if (fs->lock)
spin_unlock_irqrestore(fs->lock, flags);
.compatible = "st,stih407-quadfs660-D",
.data = &st_fs660c32_D_407
},
- {
- .compatible = "st,stih407-quadfs660-D",
- .data = (void *)&st_fs660c32_D_407
- },
{}
};
#include <linux/slab.h>
#include <linux/of_address.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
static DEFINE_SPINLOCK(clkgena_divmux_lock);
int *num_parents)
{
const char **parents;
- int nparents, i;
+ int nparents;
nparents = of_clk_get_parent_count(np);
if (WARN_ON(nparents <= 0))
return ERR_PTR(-EINVAL);
- parents = kzalloc(nparents * sizeof(const char *), GFP_KERNEL);
+ parents = kcalloc(nparents, sizeof(const char *), GFP_KERNEL);
if (!parents)
return ERR_PTR(-ENOMEM);
- for (i = 0; i < nparents; i++)
- parents[i] = of_clk_get_parent_name(np, i);
-
- *num_parents = nparents;
+ *num_parents = of_clk_parent_fill(np, parents, nparents);
return parents;
}
/**
* clk_register_genamux - register a genamux clock with the clock framework
*/
-static struct clk *clk_register_genamux(const char *name,
+static struct clk * __init clk_register_genamux(const char *name,
const char **parent_names, u8 num_parents,
void __iomem *reg,
const struct clkgena_divmux_data *muxdata,
init.name = name;
init.ops = &clkgena_divmux_ops;
- init.flags = CLK_IS_BASIC;
+ init.flags = CLK_IS_BASIC | CLK_GET_RATE_NOCACHE;
init.parent_names = parent_names;
init.num_parents = num_parents;
{}
};
-static void __iomem * __init clkgen_get_register_base(
- struct device_node *np)
+static void __iomem * __init clkgen_get_register_base(struct device_node *np)
{
struct device_node *pnode;
- void __iomem *reg = NULL;
+ void __iomem *reg;
pnode = of_get_parent(np);
if (!pnode)
if (WARN_ON(!match))
return;
- data = (struct clkgena_divmux_data *)match->data;
+ data = match->data;
reg = clkgen_get_register_base(np);
if (!reg)
parents = clkgen_mux_get_parents(np, &num_parents);
if (IS_ERR(parents))
- return;
+ goto err_parents;
clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
if (!clk_data)
- goto err;
+ goto err_alloc;
clk_data->clk_num = data->num_outputs;
- clk_data->clks = kzalloc(clk_data->clk_num * sizeof(struct clk *),
+ clk_data->clks = kcalloc(clk_data->clk_num, sizeof(struct clk *),
GFP_KERNEL);
if (!clk_data->clks)
- goto err;
+ goto err_alloc_clks;
for (i = 0; i < clk_data->clk_num; i++) {
struct clk *clk;
of_clk_add_provider(np, of_clk_src_onecell_get, clk_data);
return;
err:
- if (clk_data)
- kfree(clk_data->clks);
-
+ kfree(clk_data->clks);
+err_alloc_clks:
kfree(clk_data);
+err_alloc:
kfree(parents);
+err_parents:
+ iounmap(reg);
}
CLK_OF_DECLARE(clkgenadivmux, "st,clkgena-divmux", st_of_clkgena_divmux_setup);
void __iomem *reg;
const char *parent_name, *clk_name;
struct clk *clk;
- struct clkgena_prediv_data *data;
+ const struct clkgena_prediv_data *data;
match = of_match_node(clkgena_prediv_of_match, np);
if (!match) {
return;
}
- data = (struct clkgena_prediv_data *)match->data;
+ data = match->data;
reg = clkgen_get_register_base(np);
if (!reg)
parent_name = of_clk_get_parent_name(np, 0);
if (!parent_name)
- return;
+ goto err;
if (of_property_read_string_index(np, "clock-output-names",
0, &clk_name))
- return;
+ goto err;
- clk = clk_register_divider_table(NULL, clk_name, parent_name, 0,
+ clk = clk_register_divider_table(NULL, clk_name, parent_name,
+ CLK_GET_RATE_NOCACHE,
reg + data->offset, data->shift, 1,
0, data->table, NULL);
if (IS_ERR(clk))
- return;
+ goto err;
of_clk_add_provider(np, of_clk_src_simple_get, clk);
pr_debug("%s: parent %s rate %u\n",
(unsigned int)clk_get_rate(clk));
return;
+err:
+ iounmap(reg);
}
CLK_OF_DECLARE(clkgenaprediv, "st,clkgena-prediv", st_of_clkgena_prediv_setup);
};
static struct clkgen_mux_data stih407_a9_mux_data = {
.offset = 0x1a4,
- .shift = 1,
+ .shift = 0,
.width = 2,
};
void __iomem *reg;
const char **parents;
int num_parents;
- struct clkgen_mux_data *data;
+ const struct clkgen_mux_data *data;
match = of_match_node(mux_of_match, np);
if (!match) {
return;
}
- data = (struct clkgen_mux_data *)match->data;
+ data = match->data;
reg = of_iomap(np, 0);
if (!reg) {
if (IS_ERR(parents)) {
pr_err("%s: Failed to get parents (%ld)\n",
__func__, PTR_ERR(parents));
- return;
+ goto err_parents;
}
clk = clk_register_mux(NULL, np->name, parents, num_parents,
__clk_get_name(clk_get_parent(clk)),
(unsigned int)clk_get_rate(clk));
+ kfree(parents);
of_clk_add_provider(np, of_clk_src_simple_get, clk);
+ return;
err:
kfree(parents);
-
- return;
+err_parents:
+ iounmap(reg);
}
CLK_OF_DECLARE(clkgen_mux, "st,clkgen-mux", st_of_clkgen_mux_setup);
const char **parents;
int num_parents, i;
struct clk_onecell_data *clk_data;
- struct clkgen_vcc_data *data;
+ const struct clkgen_vcc_data *data;
match = of_match_node(vcc_of_match, np);
if (WARN_ON(!match))
return;
- data = (struct clkgen_vcc_data *)match->data;
+ data = match->data;
reg = of_iomap(np, 0);
if (!reg)
parents = clkgen_mux_get_parents(np, &num_parents);
if (IS_ERR(parents))
- return;
+ goto err_parents;
clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
if (!clk_data)
- goto err;
+ goto err_alloc;
clk_data->clk_num = VCC_MAX_CHANNELS;
- clk_data->clks = kzalloc(clk_data->clk_num * sizeof(struct clk *),
+ clk_data->clks = kcalloc(clk_data->clk_num, sizeof(struct clk *),
GFP_KERNEL);
if (!clk_data->clks)
- goto err;
+ goto err_alloc_clks;
for (i = 0; i < clk_data->clk_num; i++) {
struct clk *clk;
if (*clk_name == '\0')
continue;
- gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
if (!gate)
- break;
+ goto err;
- div = kzalloc(sizeof(struct clk_divider), GFP_KERNEL);
+ div = kzalloc(sizeof(*div), GFP_KERNEL);
if (!div) {
kfree(gate);
- break;
+ goto err;
}
- mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL);
+ mux = kzalloc(sizeof(*mux), GFP_KERNEL);
if (!mux) {
kfree(gate);
kfree(div);
- break;
+ goto err;
}
gate->reg = reg + VCC_GATE_OFFSET;
&mux->hw, &clk_mux_ops,
&div->hw, &clk_divider_ops,
&gate->hw, &clk_gate_ops,
- data->clk_flags);
+ data->clk_flags |
+ CLK_GET_RATE_NOCACHE);
if (IS_ERR(clk)) {
kfree(gate);
kfree(div);
kfree(container_of(composite->mux_hw, struct clk_mux, hw));
}
- if (clk_data)
- kfree(clk_data->clks);
-
+ kfree(clk_data->clks);
+err_alloc_clks:
kfree(clk_data);
+err_alloc:
kfree(parents);
+err_parents:
+ iounmap(reg);
}
CLK_OF_DECLARE(clkgen_vcc, "st,clkgen-vcc", st_of_clkgen_vcc_setup);
#include <linux/slab.h>
#include <linux/of_address.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include "clkgen.h"
init.name = clk_name;
init.ops = pll_data->ops;
- init.flags = CLK_IS_BASIC;
+ init.flags = CLK_IS_BASIC | CLK_GET_RATE_NOCACHE;
init.parent_names = &parent_name;
init.num_parents = 1;
goto free_mux;
/* gmac clock requires exactly 2 parents */
- parents[0] = of_clk_get_parent_name(node, 0);
- parents[1] = of_clk_get_parent_name(node, 1);
- if (!parents[0] || !parents[1])
+ if (of_clk_parent_fill(node, parents, 2) != 2)
goto free_gate;
reg = of_iomap(node, 0);
return rate;
}
-static long clk_factors_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_p)
+static int clk_factors_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct clk *clk = hw->clk, *parent, *best_parent = NULL;
int i, num_parents;
if (!parent)
continue;
if (__clk_get_flags(clk) & CLK_SET_RATE_PARENT)
- parent_rate = __clk_round_rate(parent, rate);
+ parent_rate = __clk_round_rate(parent, req->rate);
else
parent_rate = __clk_get_rate(parent);
- child_rate = clk_factors_round_rate(hw, rate, &parent_rate);
+ child_rate = clk_factors_round_rate(hw, req->rate,
+ &parent_rate);
- if (child_rate <= rate && child_rate > best_child_rate) {
+ if (child_rate <= req->rate && child_rate > best_child_rate) {
best_parent = parent;
best = parent_rate;
best_child_rate = child_rate;
}
}
- if (best_parent)
- *best_parent_p = __clk_get_hw(best_parent);
- *best_parent_rate = best;
+ if (!best_parent)
+ return -EINVAL;
- return best_child_rate;
+ req->best_parent_hw = __clk_get_hw(best_parent);
+ req->best_parent_rate = best;
+ req->rate = best_child_rate;
+
+ return 0;
}
static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
int i = 0;
/* if we have a mux, we will have >1 parents */
- while (i < FACTORS_MAX_PARENTS &&
- (parents[i] = of_clk_get_parent_name(node, i)) != NULL)
- i++;
+ i = of_clk_parent_fill(node, parents, FACTORS_MAX_PARENTS);
/*
* some factor clocks, such as pll5 and pll6, may have multiple
* GNU General Public License for more details.
*/
+#include <linux/clk.h>
#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include "clk-factors.h"
return (parent_rate >> shift) / (div + 1);
}
-static long ar100_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk)
+static int ar100_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
int nparents = __clk_get_num_parents(hw->clk);
long best_rate = -EINVAL;
int i;
- *best_parent_clk = NULL;
+ req->best_parent_hw = NULL;
for (i = 0; i < nparents; i++) {
unsigned long parent_rate;
parent = clk_get_parent_by_index(hw->clk, i);
parent_rate = __clk_get_rate(parent);
- div = DIV_ROUND_UP(parent_rate, rate);
+ div = DIV_ROUND_UP(parent_rate, req->rate);
/*
* The AR100 clk contains 2 divisors:
continue;
tmp_rate = (parent_rate >> shift) / div;
- if (!*best_parent_clk || tmp_rate > best_rate) {
- *best_parent_clk = __clk_get_hw(parent);
- *best_parent_rate = parent_rate;
+ if (!req->best_parent_hw || tmp_rate > best_rate) {
+ req->best_parent_hw = __clk_get_hw(parent);
+ req->best_parent_rate = parent_rate;
best_rate = tmp_rate;
}
}
- return best_rate;
+ if (best_rate < 0)
+ return best_rate;
+
+ req->rate = best_rate;
+
+ return 0;
}
static int ar100_set_parent(struct clk_hw *hw, u8 index)
struct resource *r;
struct clk *clk;
int nparents;
- int i;
ar100 = devm_kzalloc(&pdev->dev, sizeof(*ar100), GFP_KERNEL);
if (!ar100)
if (nparents > SUN6I_AR100_MAX_PARENTS)
nparents = SUN6I_AR100_MAX_PARENTS;
- for (i = 0; i < nparents; i++)
- parents[i] = of_clk_get_parent_name(np, i);
+ of_clk_parent_fill(np, parents, nparents);
of_property_read_string(np, "clock-output-names", &clk_name);
* GNU General Public License for more details.
*/
+#include <linux/clk.h>
#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
#include <linux/of_address.h>
#include "clk-factors.h"
* GNU General Public License for more details.
*/
+#include <linux/clk.h>
#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/log2.h>
* GNU General Public License for more details.
*/
+#include <linux/clk.h>
#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/reset.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#define SUN9I_MMC_WIDTH 4
* GNU General Public License for more details.
*/
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/reset-controller.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/log2.h>
return (parent_rate / calcm) >> calcp;
}
-static long sun6i_ahb1_clk_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk)
+static int sun6i_ahb1_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct clk *clk = hw->clk, *parent, *best_parent = NULL;
int i, num_parents;
if (!parent)
continue;
if (__clk_get_flags(clk) & CLK_SET_RATE_PARENT)
- parent_rate = __clk_round_rate(parent, rate);
+ parent_rate = __clk_round_rate(parent, req->rate);
else
parent_rate = __clk_get_rate(parent);
- child_rate = sun6i_ahb1_clk_round(rate, NULL, NULL, i,
+ child_rate = sun6i_ahb1_clk_round(req->rate, NULL, NULL, i,
parent_rate);
- if (child_rate <= rate && child_rate > best_child_rate) {
+ if (child_rate <= req->rate && child_rate > best_child_rate) {
best_parent = parent;
best = parent_rate;
best_child_rate = child_rate;
}
}
- if (best_parent)
- *best_parent_clk = __clk_get_hw(best_parent);
- *best_parent_rate = best;
+ if (!best_parent)
+ return -EINVAL;
- return best_child_rate;
+ req->best_parent_hw = __clk_get_hw(best_parent);
+ req->best_parent_rate = best;
+ req->rate = best_child_rate;
+
+ return 0;
}
static int sun6i_ahb1_clk_set_rate(struct clk_hw *hw, unsigned long rate,
const char *clk_name = node->name;
const char *parents[SUN6I_AHB1_MAX_PARENTS];
void __iomem *reg;
- int i = 0;
+ int i;
reg = of_io_request_and_map(node, 0, of_node_full_name(node));
if (IS_ERR(reg))
return;
/* we have a mux, we will have >1 parents */
- while (i < SUN6I_AHB1_MAX_PARENTS &&
- (parents[i] = of_clk_get_parent_name(node, i)) != NULL)
- i++;
-
+ i = of_clk_parent_fill(node, parents, SUN6I_AHB1_MAX_PARENTS);
of_property_read_string(node, "clock-output-names", &clk_name);
ahb1 = kzalloc(sizeof(struct sun6i_ahb1_clk), GFP_KERNEL);
const char *clk_name = node->name;
const char *parents[SUNXI_MAX_PARENTS];
void __iomem *reg;
- int i = 0;
+ int i;
reg = of_iomap(node, 0);
- while (i < SUNXI_MAX_PARENTS &&
- (parents[i] = of_clk_get_parent_name(node, i)) != NULL)
- i++;
-
+ i = of_clk_parent_fill(node, parents, SUNXI_MAX_PARENTS);
of_property_read_string(node, "clock-output-names", &clk_name);
clk = clk_register_mux(NULL, clk_name, parents, i,
* GNU General Public License for more details.
*/
+#include <linux/clk.h>
#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/reset-controller.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/clk-provider.h>
-#include <linux/clk.h>
#include "clk.h"
* safer since things have EMC rate floors. Also don't touch parent_rate
* since we don't want the CCF to play with our parent clocks.
*/
-static long emc_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_hw)
+static int emc_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
{
struct tegra_clk_emc *tegra;
u8 ram_code = tegra_read_ram_code();
timing = tegra->timings + i;
- if (timing->rate > max_rate) {
+ if (timing->rate > req->max_rate) {
i = min(i, 1);
- return tegra->timings[i - 1].rate;
+ req->rate = tegra->timings[i - 1].rate;
+ return 0;
}
- if (timing->rate < min_rate)
+ if (timing->rate < req->min_rate)
continue;
- if (timing->rate >= rate)
- return timing->rate;
+ if (timing->rate >= req->rate) {
+ req->rate = timing->rate;
+ return 0;
+ }
}
- if (timing)
- return timing->rate;
+ if (timing) {
+ req->rate = timing->rate;
+ return 0;
+ }
- return __clk_get_rate(hw->clk);
+ req->rate = __clk_get_rate(hw->clk);
+ return 0;
}
static u8 emc_get_parent(struct clk_hw *hw)
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/slab.h>
#include <linux/io.h>
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/export.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/clk-provider.h>
-#include <linux/clk.h>
#include "clk.h"
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/err.h>
-#include <linux/clk-provider.h>
#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include "clk.h"
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/clk-provider.h>
-#include <linux/clk.h>
#include "clk.h"
*/
#include <linux/io.h>
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
*/
#include <linux/io.h>
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
*/
#include <linux/io.h>
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/of.h>
*/
#include <linux/io.h>
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/of.h>
*/
#include <linux/io.h>
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
*/
#include <linux/io.h>
-#include <linux/clk.h>
#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/delay.h>
*/
#include <linux/io.h>
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/of.h>
*/
#include <linux/io.h>
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/of.h>
#include <linux/io.h>
#include <linux/delay.h>
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/of.h>
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/clkdev.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
obj-y += clk.o autoidle.o clockdomain.o
clk-common = dpll.o composite.o divider.o gate.o \
- fixed-factor.o mux.o apll.o
-obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o
+ fixed-factor.o mux.o apll.o \
+ clkt_dpll.o clkt_iclk.o clkt_dflt.o
+obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o dpll3xxx.o
obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o
obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o
obj-$(CONFIG_ARCH_OMAP3) += $(clk-common) interface.o \
- clk-3xxx.o
-obj-$(CONFIG_ARCH_OMAP4) += $(clk-common) clk-44xx.o
-obj-$(CONFIG_SOC_OMAP5) += $(clk-common) clk-54xx.o
+ clk-3xxx.o dpll3xxx.o
+obj-$(CONFIG_ARCH_OMAP4) += $(clk-common) clk-44xx.o \
+ dpll3xxx.o dpll44xx.o
+obj-$(CONFIG_SOC_OMAP5) += $(clk-common) clk-54xx.o \
+ dpll3xxx.o dpll44xx.o
obj-$(CONFIG_SOC_DRA7XX) += $(clk-common) clk-7xx.o \
- clk-dra7-atl.o
-obj-$(CONFIG_SOC_AM43XX) += $(clk-common) clk-43xx.o
+ clk-dra7-atl.o dpll3xxx.o dpll44xx.o
+obj-$(CONFIG_SOC_AM43XX) += $(clk-common) dpll3xxx.o clk-43xx.o
ifdef CONFIG_ATAGS
obj-$(CONFIG_ARCH_OMAP3) += clk-3xxx-legacy.o
* GNU General Public License for more details.
*/
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/clk/ti.h>
#include <linux/delay.h>
+#include "clock.h"
+
#define APLL_FORCE_LOCK 0x1
#define APLL_AUTO_IDLE 0x2
#define MAX_APLL_WAIT_TRIES 1000000
struct clk_hw_omap *clk_hw = NULL;
struct clk_init_data *init = NULL;
const char **parent_names = NULL;
- int i;
ad = kzalloc(sizeof(*ad), GFP_KERNEL);
clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
if (!parent_names)
goto cleanup;
- for (i = 0; i < init->num_parents; i++)
- parent_names[i] = of_clk_get_parent_name(node, i);
+ of_clk_parent_fill(node, parent_names, init->num_parents);
init->parent_names = parent_names;
#include <linux/of_address.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
struct clk_ti_autoidle {
void __iomem *reg;
u8 shift;
#define AUTOIDLE_LOW 0x1
static LIST_HEAD(autoidle_clks);
+static LIST_HEAD(clk_hw_omap_clocks);
-static void ti_allow_autoidle(struct clk_ti_autoidle *clk)
+/**
+ * omap2_clk_deny_idle - disable autoidle on an OMAP clock
+ * @clk: struct clk * to disable autoidle for
+ *
+ * Disable autoidle on an OMAP clock.
+ */
+int omap2_clk_deny_idle(struct clk *clk)
+{
+ struct clk_hw_omap *c;
+
+ if (__clk_get_flags(clk) & CLK_IS_BASIC)
+ return -EINVAL;
+
+ c = to_clk_hw_omap(__clk_get_hw(clk));
+ if (c->ops && c->ops->deny_idle)
+ c->ops->deny_idle(c);
+ return 0;
+}
+
+/**
+ * omap2_clk_allow_idle - enable autoidle on an OMAP clock
+ * @clk: struct clk * to enable autoidle for
+ *
+ * Enable autoidle on an OMAP clock.
+ */
+int omap2_clk_allow_idle(struct clk *clk)
+{
+ struct clk_hw_omap *c;
+
+ if (__clk_get_flags(clk) & CLK_IS_BASIC)
+ return -EINVAL;
+
+ c = to_clk_hw_omap(__clk_get_hw(clk));
+ if (c->ops && c->ops->allow_idle)
+ c->ops->allow_idle(c);
+ return 0;
+}
+
+static void _allow_autoidle(struct clk_ti_autoidle *clk)
{
u32 val;
ti_clk_ll_ops->clk_writel(val, clk->reg);
}
-static void ti_deny_autoidle(struct clk_ti_autoidle *clk)
+static void _deny_autoidle(struct clk_ti_autoidle *clk)
{
u32 val;
}
/**
- * of_ti_clk_allow_autoidle_all - enable autoidle for all clocks
+ * _clk_generic_allow_autoidle_all - enable autoidle for all clocks
*
* Enables hardware autoidle for all registered DT clocks, which have
* the feature.
*/
-void of_ti_clk_allow_autoidle_all(void)
+static void _clk_generic_allow_autoidle_all(void)
{
struct clk_ti_autoidle *c;
list_for_each_entry(c, &autoidle_clks, node)
- ti_allow_autoidle(c);
+ _allow_autoidle(c);
}
/**
- * of_ti_clk_deny_autoidle_all - disable autoidle for all clocks
+ * _clk_generic_deny_autoidle_all - disable autoidle for all clocks
*
* Disables hardware autoidle for all registered DT clocks, which have
* the feature.
*/
-void of_ti_clk_deny_autoidle_all(void)
+static void _clk_generic_deny_autoidle_all(void)
{
struct clk_ti_autoidle *c;
list_for_each_entry(c, &autoidle_clks, node)
- ti_deny_autoidle(c);
+ _deny_autoidle(c);
}
/**
return 0;
}
+
+/**
+ * omap2_init_clk_hw_omap_clocks - initialize an OMAP clock
+ * @clk: struct clk * to initialize
+ *
+ * Add an OMAP clock @clk to the internal list of OMAP clocks. Used
+ * temporarily for autoidle handling, until this support can be
+ * integrated into the common clock framework code in some way. No
+ * return value.
+ */
+void omap2_init_clk_hw_omap_clocks(struct clk *clk)
+{
+ struct clk_hw_omap *c;
+
+ if (__clk_get_flags(clk) & CLK_IS_BASIC)
+ return;
+
+ c = to_clk_hw_omap(__clk_get_hw(clk));
+ list_add(&c->node, &clk_hw_omap_clocks);
+}
+
+/**
+ * omap2_clk_enable_autoidle_all - enable autoidle on all OMAP clocks that
+ * support it
+ *
+ * Enable clock autoidle on all OMAP clocks that have allow_idle
+ * function pointers associated with them. This function is intended
+ * to be temporary until support for this is added to the common clock
+ * code. Returns 0.
+ */
+int omap2_clk_enable_autoidle_all(void)
+{
+ struct clk_hw_omap *c;
+
+ list_for_each_entry(c, &clk_hw_omap_clocks, node)
+ if (c->ops && c->ops->allow_idle)
+ c->ops->allow_idle(c);
+
+ _clk_generic_allow_autoidle_all();
+
+ return 0;
+}
+
+/**
+ * omap2_clk_disable_autoidle_all - disable autoidle on all OMAP clocks that
+ * support it
+ *
+ * Disable clock autoidle on all OMAP clocks that have allow_idle
+ * function pointers associated with them. This function is intended
+ * to be temporary until support for this is added to the common clock
+ * code. Returns 0.
+ */
+int omap2_clk_disable_autoidle_all(void)
+{
+ struct clk_hw_omap *c;
+
+ list_for_each_entry(c, &clk_hw_omap_clocks, node)
+ if (c->ops && c->ops->deny_idle)
+ c->ops->deny_idle(c);
+
+ _clk_generic_deny_autoidle_all();
+
+ return 0;
+}
#include <linux/kernel.h>
#include <linux/list.h>
-#include <linux/clk-provider.h>
+#include <linux/clk.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
static struct ti_dt_clk omap2xxx_clks[] = {
DT_CLK(NULL, "func_32k_ck", "func_32k_ck"),
DT_CLK(NULL, "secure_32k_ck", "secure_32k_ck"),
#include <linux/kernel.h>
#include <linux/list.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
static struct ti_dt_clk am33xx_clks[] = {
DT_CLK(NULL, "clk_32768_ck", "clk_32768_ck"),
DT_CLK(NULL, "clk_rc32k_ck", "clk_rc32k_ck"),
*/
#include <linux/kernel.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
#include <linux/kernel.h>
#include <linux/list.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
+/*
+ * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
+ * that are sourced by DPLL5, and both of these require this clock
+ * to be at 120 MHz for proper operation.
+ */
+#define DPLL5_FREQ_FOR_USBHOST 120000000
+
+#define OMAP3430ES2_ST_DSS_IDLE_SHIFT 1
+#define OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT 5
+#define OMAP3430ES2_ST_SSI_IDLE_SHIFT 8
+
+#define OMAP34XX_CM_IDLEST_VAL 1
+
+/*
+ * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
+ * in the same register at a bit offset of 0x8. The EN_ACK for ICK is
+ * at an offset of 4 from ICK enable bit.
+ */
+#define AM35XX_IPSS_ICK_MASK 0xF
+#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4
+#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8
+#define AM35XX_IPSS_CLK_IDLEST_VAL 0
+
+#define AM35XX_ST_IPSS_SHIFT 5
+
+/**
+ * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
+ * from the CM_{I,F}CLKEN bit. Pass back the correct info via
+ * @idlest_reg and @idlest_bit. No return value.
+ */
+static void omap3430es2_clk_ssi_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = omap3430es2_clk_ssi_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+/**
+ * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * Some OMAP modules on OMAP3 ES2+ chips have both initiator and
+ * target IDLEST bits. For our purposes, we are concerned with the
+ * target IDLEST bits, which exist at a different bit position than
+ * the *CLKEN bit position for these modules (DSS and USBHOST) (The
+ * default find_idlest code assumes that they are at the same
+ * position.) No return value.
+ */
+static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ /* USBHOST_IDLE has same shift */
+ *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait = {
+ .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+/**
+ * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
+ * shift from the CM_{I,F}CLKEN bit. Pass back the correct info via
+ * @idlest_reg and @idlest_bit. No return value.
+ */
+static void omap3430es2_clk_hsotgusb_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+/**
+ * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The interface clocks on AM35xx IPSS reflects the clock idle status
+ * in the enable register itsel at a bit offset of 4 from the enable
+ * bit. A value of 1 indicates that clock is enabled.
+ */
+static void am35xx_clk_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ *idlest_reg = (__force void __iomem *)(clk->enable_reg);
+ *idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
+ *idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
+}
+
+/**
+ * am35xx_clk_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Some clocks don't have companion clocks. For example, modules with
+ * only an interface clock (such as HECC) don't have a companion
+ * clock. Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active. Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts. No return value.
+ */
+static void am35xx_clk_find_companion(struct clk_hw_omap *clk,
+ void __iomem **other_reg,
+ u8 *other_bit)
+{
+ *other_reg = (__force void __iomem *)(clk->enable_reg);
+ if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
+ *other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
+ else
+ *other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
+}
+
+const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait = {
+ .find_idlest = am35xx_clk_find_idlest,
+ .find_companion = am35xx_clk_find_companion,
+};
+
+/**
+ * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The IPSS target CM_IDLEST bit is at a different shift from the
+ * CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg
+ * and @idlest_bit. No return value.
+ */
+static void am35xx_clk_ipss_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = AM35XX_ST_IPSS_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = am35xx_clk_ipss_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
static struct ti_dt_clk omap3xxx_clks[] = {
DT_CLK(NULL, "apb_pclk", "dummy_apb_pclk"),
OMAP3_SOC_OMAP3630,
};
+/**
+ * omap3_clk_lock_dpll5 - locks DPLL5
+ *
+ * Locks DPLL5 to a pre-defined frequency. This is required for proper
+ * operation of USB.
+ */
+void __init omap3_clk_lock_dpll5(void)
+{
+ struct clk *dpll5_clk;
+ struct clk *dpll5_m2_clk;
+
+ dpll5_clk = clk_get(NULL, "dpll5_ck");
+ clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
+ clk_prepare_enable(dpll5_clk);
+
+ /* Program dpll5_m2_clk divider for no division */
+ dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
+ clk_prepare_enable(dpll5_m2_clk);
+ clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
+
+ clk_disable_unprepare(dpll5_m2_clk);
+ clk_disable_unprepare(dpll5_clk);
+}
+
static int __init omap3xxx_dt_clk_init(int soc_type)
{
if (soc_type == OMAP3_SOC_AM35XX || soc_type == OMAP3_SOC_OMAP3630 ||
#include <linux/kernel.h>
#include <linux/list.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
static struct ti_dt_clk am43xx_clks[] = {
DT_CLK(NULL, "clk_32768_ck", "clk_32768_ck"),
DT_CLK(NULL, "clk_rc32k_ck", "clk_rc32k_ck"),
#include <linux/clkdev.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
/*
* OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section
* "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK
#include <linux/io.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
#define OMAP5_DPLL_ABE_DEFFREQ 98304000
/*
#include <linux/clkdev.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
#define DRA7_DPLL_ABE_DEFFREQ 180633600
#define DRA7_DPLL_GMAC_DEFFREQ 1000000000
#define DRA7_DPLL_USB_DEFFREQ 960000000
-
static struct ti_dt_clk dra7xx_clks[] = {
DT_CLK(NULL, "atl_clkin0_ck", "atl_clkin0_ck"),
DT_CLK(NULL, "atl_clkin1_ck", "atl_clkin1_ck"),
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
static struct ti_dt_clk dm816x_clks[] = {
DT_CLK(NULL, "sys_clkin", "sys_clkin_ck"),
DT_CLK(NULL, "timer_sys_ck", "sys_clkin_ck"),
*/
#include <linux/module.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/slab.h>
#include <linux/io.h>
* GNU General Public License for more details.
*/
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/clk/ti.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/list.h>
+#include <linux/regmap.h>
+#include <linux/bootmem.h>
#include "clock.h"
struct ti_clk_ll_ops *ti_clk_ll_ops;
static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
+static struct ti_clk_features ti_clk_features;
+
+struct clk_iomap {
+ struct regmap *regmap;
+ void __iomem *mem;
+};
+
+static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
+
+static void clk_memmap_writel(u32 val, void __iomem *reg)
+{
+ struct clk_omap_reg *r = (struct clk_omap_reg *)®
+ struct clk_iomap *io = clk_memmaps[r->index];
+
+ if (io->regmap)
+ regmap_write(io->regmap, r->offset, val);
+ else
+ writel_relaxed(val, io->mem + r->offset);
+}
+
+static u32 clk_memmap_readl(void __iomem *reg)
+{
+ u32 val;
+ struct clk_omap_reg *r = (struct clk_omap_reg *)®
+ struct clk_iomap *io = clk_memmaps[r->index];
+
+ if (io->regmap)
+ regmap_read(io->regmap, r->offset, &val);
+ else
+ val = readl_relaxed(io->mem + r->offset);
+
+ return val;
+}
+
+/**
+ * ti_clk_setup_ll_ops - setup low level clock operations
+ * @ops: low level clock ops descriptor
+ *
+ * Sets up low level clock operations for TI clock driver. This is used
+ * to provide various callbacks for the clock driver towards platform
+ * specific code. Returns 0 on success, -EBUSY if ll_ops have been
+ * registered already.
+ */
+int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops)
+{
+ if (ti_clk_ll_ops) {
+ pr_err("Attempt to register ll_ops multiple times.\n");
+ return -EBUSY;
+ }
+
+ ti_clk_ll_ops = ops;
+ ops->clk_readl = clk_memmap_readl;
+ ops->clk_writel = clk_memmap_writel;
+
+ return 0;
+}
+
/**
* ti_dt_clocks_register - register DT alias clocks during boot
* @oclks: list of clocks to register
reg->offset = val;
- return (void __iomem *)tmp;
+ return (__force void __iomem *)tmp;
}
/**
- * ti_dt_clk_init_provider - init master clock provider
+ * omap2_clk_provider_init - init master clock provider
* @parent: master node
* @index: internal index for clk_reg_ops
+ * @syscon: syscon regmap pointer for accessing clock registers
+ * @mem: iomem pointer for the clock provider memory area, only used if
+ * syscon is not provided
*
* Initializes a master clock IP block. This basically sets up the
* mapping from clocks node to the memory map index. All the clocks
* are then initialized through the common of_clk_init call, and the
* clocks will access their memory maps based on the node layout.
+ * Returns 0 in success.
*/
-void ti_dt_clk_init_provider(struct device_node *parent, int index)
+int __init omap2_clk_provider_init(struct device_node *parent, int index,
+ struct regmap *syscon, void __iomem *mem)
{
struct device_node *clocks;
+ struct clk_iomap *io;
/* get clocks for this parent */
clocks = of_get_child_by_name(parent, "clocks");
if (!clocks) {
pr_err("%s missing 'clocks' child node.\n", parent->name);
- return;
+ return -EINVAL;
}
/* add clocks node info */
clocks_node_ptr[index] = clocks;
+
+ io = kzalloc(sizeof(*io), GFP_KERNEL);
+ if (!io)
+ return -ENOMEM;
+
+ io->regmap = syscon;
+ io->mem = mem;
+
+ clk_memmaps[index] = io;
+
+ return 0;
+}
+
+/**
+ * omap2_clk_legacy_provider_init - initialize a legacy clock provider
+ * @index: index for the clock provider
+ * @mem: iomem pointer for the clock provider memory area
+ *
+ * Initializes a legacy clock provider memory mapping.
+ */
+void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
+{
+ struct clk_iomap *io;
+
+ io = memblock_virt_alloc(sizeof(*io), 0);
+
+ io->mem = mem;
+
+ clk_memmaps[index] = io;
}
/**
return 0;
}
#endif
+
+/**
+ * ti_clk_setup_features - setup clock features flags
+ * @features: features definition to use
+ *
+ * Initializes the clock driver features flags based on platform
+ * provided data. No return value.
+ */
+void __init ti_clk_setup_features(struct ti_clk_features *features)
+{
+ memcpy(&ti_clk_features, features, sizeof(*features));
+}
+
+/**
+ * ti_clk_get_features - get clock driver features flags
+ *
+ * Get TI clock driver features description. Returns a pointer
+ * to the current feature setup.
+ */
+const struct ti_clk_features *ti_clk_get_features(void)
+{
+ return &ti_clk_features;
+}
+
+/**
+ * omap2_clk_enable_init_clocks - prepare & enable a list of clocks
+ * @clk_names: ptr to an array of strings of clock names to enable
+ * @num_clocks: number of clock names in @clk_names
+ *
+ * Prepare and enable a list of clocks, named by @clk_names. No
+ * return value. XXX Deprecated; only needed until these clocks are
+ * properly claimed and enabled by the drivers or core code that uses
+ * them. XXX What code disables & calls clk_put on these clocks?
+ */
+void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks)
+{
+ struct clk *init_clk;
+ int i;
+
+ for (i = 0; i < num_clocks; i++) {
+ init_clk = clk_get(NULL, clk_names[i]);
+ if (WARN(IS_ERR(init_clk), "could not find init clock %s\n",
+ clk_names[i]))
+ continue;
+ clk_prepare_enable(init_clk);
+ }
+}
--- /dev/null
+/*
+ * Default clock type
+ *
+ * Copyright (C) 2005-2008, 2015 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/clk/ti.h>
+#include <linux/delay.h>
+
+#include "clock.h"
+
+/*
+ * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait
+ * for a module to indicate that it is no longer in idle
+ */
+#define MAX_MODULE_ENABLE_WAIT 100000
+
+/*
+ * CM module register offsets, used for calculating the companion
+ * register addresses.
+ */
+#define CM_FCLKEN 0x0000
+#define CM_ICLKEN 0x0010
+
+/**
+ * _wait_idlest_generic - wait for a module to leave the idle state
+ * @clk: module clock to wait for (needed for register offsets)
+ * @reg: virtual address of module IDLEST register
+ * @mask: value to mask against to determine if the module is active
+ * @idlest: idle state indicator (0 or 1) for the clock
+ * @name: name of the clock (for printk)
+ *
+ * Wait for a module to leave idle, where its idle-status register is
+ * not inside the CM module. Returns 1 if the module left idle
+ * promptly, or 0 if the module did not leave idle before the timeout
+ * elapsed. XXX Deprecated - should be moved into drivers for the
+ * individual IP block that the IDLEST register exists in.
+ */
+static int _wait_idlest_generic(struct clk_hw_omap *clk, void __iomem *reg,
+ u32 mask, u8 idlest, const char *name)
+{
+ int i = 0, ena = 0;
+
+ ena = (idlest) ? 0 : mask;
+
+ /* Wait until module enters enabled state */
+ for (i = 0; i < MAX_MODULE_ENABLE_WAIT; i++) {
+ if ((ti_clk_ll_ops->clk_readl(reg) & mask) == ena)
+ break;
+ udelay(1);
+ }
+
+ if (i < MAX_MODULE_ENABLE_WAIT)
+ pr_debug("omap clock: module associated with clock %s ready after %d loops\n",
+ name, i);
+ else
+ pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n",
+ name, MAX_MODULE_ENABLE_WAIT);
+
+ return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
+}
+
+/**
+ * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE
+ * @clk: struct clk * belonging to the module
+ *
+ * If the necessary clocks for the OMAP hardware IP block that
+ * corresponds to clock @clk are enabled, then wait for the module to
+ * indicate readiness (i.e., to leave IDLE). This code does not
+ * belong in the clock code and will be moved in the medium term to
+ * module-dependent code. No return value.
+ */
+static void _omap2_module_wait_ready(struct clk_hw_omap *clk)
+{
+ void __iomem *companion_reg, *idlest_reg;
+ u8 other_bit, idlest_bit, idlest_val, idlest_reg_id;
+ s16 prcm_mod;
+ int r;
+
+ /* Not all modules have multiple clocks that their IDLEST depends on */
+ if (clk->ops->find_companion) {
+ clk->ops->find_companion(clk, &companion_reg, &other_bit);
+ if (!(ti_clk_ll_ops->clk_readl(companion_reg) &
+ (1 << other_bit)))
+ return;
+ }
+
+ clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
+ r = ti_clk_ll_ops->cm_split_idlest_reg(idlest_reg, &prcm_mod,
+ &idlest_reg_id);
+ if (r) {
+ /* IDLEST register not in the CM module */
+ _wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit),
+ idlest_val, __clk_get_name(clk->hw.clk));
+ } else {
+ ti_clk_ll_ops->cm_wait_module_ready(0, prcm_mod, idlest_reg_id,
+ idlest_bit);
+ }
+}
+
+/**
+ * omap2_clk_dflt_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Note: We don't need special code here for INVERT_ENABLE for the
+ * time being since INVERT_ENABLE only applies to clocks enabled by
+ * CM_CLKEN_PLL
+ *
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's
+ * just a matter of XORing the bits.
+ *
+ * Some clocks don't have companion clocks. For example, modules with
+ * only an interface clock (such as MAILBOXES) don't have a companion
+ * clock. Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active. Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts. No return value.
+ */
+void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
+ void __iomem **other_reg, u8 *other_bit)
+{
+ u32 r;
+
+ /*
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes
+ * it's just a matter of XORing the bits.
+ */
+ r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN));
+
+ *other_reg = (__force void __iomem *)r;
+ *other_bit = clk->enable_bit;
+}
+
+/**
+ * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
+ * @clk: struct clk * to find IDLEST info for
+ * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
+ * @idlest_bit: u8 * to return the CM_IDLEST bit shift in
+ * @idlest_val: u8 * to return the idle status indicator
+ *
+ * Return the CM_IDLEST register address and bit shift corresponding
+ * to the module that "owns" this clock. This default code assumes
+ * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that
+ * the IDLEST register address ID corresponds to the CM_*CLKEN
+ * register address ID (e.g., that CM_FCLKEN2 corresponds to
+ * CM_IDLEST2). This is not true for all modules. No return value.
+ */
+void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg, u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = clk->enable_bit;
+
+ /*
+ * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+ * 34xx reverses this, just to keep us on our toes
+ * AM35xx uses both, depending on the module.
+ */
+ *idlest_val = ti_clk_get_features()->cm_idlest_val;
+}
+
+/**
+ * omap2_dflt_clk_enable - enable a clock in the hardware
+ * @hw: struct clk_hw * of the clock to enable
+ *
+ * Enable the clock @hw in the hardware. We first call into the OMAP
+ * clockdomain code to "enable" the corresponding clockdomain if this
+ * is the first enabled user of the clockdomain. Then program the
+ * hardware to enable the clock. Then wait for the IP block that uses
+ * this clock to leave idle (if applicable). Returns the error value
+ * from clkdm_clk_enable() if it terminated with an error, or -EINVAL
+ * if @hw has a null clock enable_reg, or zero upon success.
+ */
+int omap2_dflt_clk_enable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk;
+ u32 v;
+ int ret = 0;
+ bool clkdm_control;
+
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL)
+ clkdm_control = false;
+ else
+ clkdm_control = true;
+
+ clk = to_clk_hw_omap(hw);
+
+ if (clkdm_control && clk->clkdm) {
+ ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+ if (ret) {
+ WARN(1,
+ "%s: could not enable %s's clockdomain %s: %d\n",
+ __func__, __clk_get_name(hw->clk),
+ clk->clkdm_name, ret);
+ return ret;
+ }
+ }
+
+ if (unlikely(!clk->enable_reg)) {
+ pr_err("%s: %s missing enable_reg\n", __func__,
+ __clk_get_name(hw->clk));
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /* FIXME should not have INVERT_ENABLE bit here */
+ v = ti_clk_ll_ops->clk_readl(clk->enable_reg);
+ if (clk->flags & INVERT_ENABLE)
+ v &= ~(1 << clk->enable_bit);
+ else
+ v |= (1 << clk->enable_bit);
+ ti_clk_ll_ops->clk_writel(v, clk->enable_reg);
+ v = ti_clk_ll_ops->clk_readl(clk->enable_reg); /* OCP barrier */
+
+ if (clk->ops && clk->ops->find_idlest)
+ _omap2_module_wait_ready(clk);
+
+ return 0;
+
+err:
+ if (clkdm_control && clk->clkdm)
+ ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+ return ret;
+}
+
+/**
+ * omap2_dflt_clk_disable - disable a clock in the hardware
+ * @hw: struct clk_hw * of the clock to disable
+ *
+ * Disable the clock @hw in the hardware, and call into the OMAP
+ * clockdomain code to "disable" the corresponding clockdomain if all
+ * clocks/hwmods in that clockdomain are now disabled. No return
+ * value.
+ */
+void omap2_dflt_clk_disable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk;
+ u32 v;
+
+ clk = to_clk_hw_omap(hw);
+ if (!clk->enable_reg) {
+ /*
+ * 'independent' here refers to a clock which is not
+ * controlled by its parent.
+ */
+ pr_err("%s: independent clock %s has no enable_reg\n",
+ __func__, __clk_get_name(hw->clk));
+ return;
+ }
+
+ v = ti_clk_ll_ops->clk_readl(clk->enable_reg);
+ if (clk->flags & INVERT_ENABLE)
+ v |= (1 << clk->enable_bit);
+ else
+ v &= ~(1 << clk->enable_bit);
+ ti_clk_ll_ops->clk_writel(v, clk->enable_reg);
+ /* No OCP barrier needed here since it is a disable operation */
+
+ if (!(ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) &&
+ clk->clkdm)
+ ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
+/**
+ * omap2_dflt_clk_is_enabled - is clock enabled in the hardware?
+ * @hw: struct clk_hw * to check
+ *
+ * Return 1 if the clock represented by @hw is enabled in the
+ * hardware, or 0 otherwise. Intended for use in the struct
+ * clk_ops.is_enabled function pointer.
+ */
+int omap2_dflt_clk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ u32 v;
+
+ v = ti_clk_ll_ops->clk_readl(clk->enable_reg);
+
+ if (clk->flags & INVERT_ENABLE)
+ v ^= BIT(clk->enable_bit);
+
+ v &= BIT(clk->enable_bit);
+
+ return v ? 1 : 0;
+}
+
+const struct clk_hw_omap_ops clkhwops_wait = {
+ .find_idlest = omap2_clk_dflt_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
--- /dev/null
+/*
+ * OMAP2/3/4 DPLL clock functions
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/clk/ti.h>
+
+#include <asm/div64.h>
+
+#include "clock.h"
+
+/* DPLL rate rounding: minimum DPLL multiplier, divider values */
+#define DPLL_MIN_MULTIPLIER 2
+#define DPLL_MIN_DIVIDER 1
+
+/* Possible error results from _dpll_test_mult */
+#define DPLL_MULT_UNDERFLOW -1
+
+/*
+ * Scale factor to mitigate roundoff errors in DPLL rate rounding.
+ * The higher the scale factor, the greater the risk of arithmetic overflow,
+ * but the closer the rounded rate to the target rate. DPLL_SCALE_FACTOR
+ * must be a power of DPLL_SCALE_BASE.
+ */
+#define DPLL_SCALE_FACTOR 64
+#define DPLL_SCALE_BASE 2
+#define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \
+ (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
+
+/*
+ * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
+ * From device data manual section 4.3 "DPLL and DLL Specifications".
+ */
+#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN 500000
+#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX 2500000
+
+/* _dpll_test_fint() return codes */
+#define DPLL_FINT_UNDERFLOW -1
+#define DPLL_FINT_INVALID -2
+
+/* Private functions */
+
+/*
+ * _dpll_test_fint - test whether an Fint value is valid for the DPLL
+ * @clk: DPLL struct clk to test
+ * @n: divider value (N) to test
+ *
+ * Tests whether a particular divider @n will result in a valid DPLL
+ * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
+ * Correction". Returns 0 if OK, -1 if the enclosing loop can terminate
+ * (assuming that it is counting N upwards), or -2 if the enclosing loop
+ * should skip to the next iteration (again assuming N is increasing).
+ */
+static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
+{
+ struct dpll_data *dd;
+ long fint, fint_min, fint_max;
+ int ret = 0;
+
+ dd = clk->dpll_data;
+
+ /* DPLL divider must result in a valid jitter correction val */
+ fint = __clk_get_rate(__clk_get_parent(clk->hw.clk)) / n;
+
+ if (dd->flags & DPLL_J_TYPE) {
+ fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
+ fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
+ } else {
+ fint_min = ti_clk_get_features()->fint_min;
+ fint_max = ti_clk_get_features()->fint_max;
+ }
+
+ if (!fint_min || !fint_max) {
+ WARN(1, "No fint limits available!\n");
+ return DPLL_FINT_INVALID;
+ }
+
+ if (fint < ti_clk_get_features()->fint_min) {
+ pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
+ n);
+ dd->max_divider = n;
+ ret = DPLL_FINT_UNDERFLOW;
+ } else if (fint > ti_clk_get_features()->fint_max) {
+ pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
+ n);
+ dd->min_divider = n;
+ ret = DPLL_FINT_INVALID;
+ } else if (fint > ti_clk_get_features()->fint_band1_max &&
+ fint < ti_clk_get_features()->fint_band2_min) {
+ pr_debug("rejecting n=%d due to Fint failure\n", n);
+ ret = DPLL_FINT_INVALID;
+ }
+
+ return ret;
+}
+
+static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
+ unsigned int m, unsigned int n)
+{
+ unsigned long long num;
+
+ num = (unsigned long long)parent_rate * m;
+ do_div(num, n);
+ return num;
+}
+
+/*
+ * _dpll_test_mult - test a DPLL multiplier value
+ * @m: pointer to the DPLL m (multiplier) value under test
+ * @n: current DPLL n (divider) value under test
+ * @new_rate: pointer to storage for the resulting rounded rate
+ * @target_rate: the desired DPLL rate
+ * @parent_rate: the DPLL's parent clock rate
+ *
+ * This code tests a DPLL multiplier value, ensuring that the
+ * resulting rate will not be higher than the target_rate, and that
+ * the multiplier value itself is valid for the DPLL. Initially, the
+ * integer pointed to by the m argument should be prescaled by
+ * multiplying by DPLL_SCALE_FACTOR. The code will replace this with
+ * a non-scaled m upon return. This non-scaled m will result in a
+ * new_rate as close as possible to target_rate (but not greater than
+ * target_rate) given the current (parent_rate, n, prescaled m)
+ * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
+ * non-scaled m attempted to underflow, which can allow the calling
+ * function to bail out early; or 0 upon success.
+ */
+static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
+ unsigned long target_rate,
+ unsigned long parent_rate)
+{
+ int r = 0, carry = 0;
+
+ /* Unscale m and round if necessary */
+ if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
+ carry = 1;
+ *m = (*m / DPLL_SCALE_FACTOR) + carry;
+
+ /*
+ * The new rate must be <= the target rate to avoid programming
+ * a rate that is impossible for the hardware to handle
+ */
+ *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+ if (*new_rate > target_rate) {
+ (*m)--;
+ *new_rate = 0;
+ }
+
+ /* Guard against m underflow */
+ if (*m < DPLL_MIN_MULTIPLIER) {
+ *m = DPLL_MIN_MULTIPLIER;
+ *new_rate = 0;
+ r = DPLL_MULT_UNDERFLOW;
+ }
+
+ if (*new_rate == 0)
+ *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+
+ return r;
+}
+
+/**
+ * _omap2_dpll_is_in_bypass - check if DPLL is in bypass mode or not
+ * @v: bitfield value of the DPLL enable
+ *
+ * Checks given DPLL enable bitfield to see whether the DPLL is in bypass
+ * mode or not. Returns 1 if the DPLL is in bypass, 0 otherwise.
+ */
+static int _omap2_dpll_is_in_bypass(u32 v)
+{
+ u8 mask, val;
+
+ mask = ti_clk_get_features()->dpll_bypass_vals;
+
+ /*
+ * Each set bit in the mask corresponds to a bypass value equal
+ * to the bitshift. Go through each set-bit in the mask and
+ * compare against the given register value.
+ */
+ while (mask) {
+ val = __ffs(mask);
+ mask ^= (1 << val);
+ if (v == val)
+ return 1;
+ }
+
+ return 0;
+}
+
+/* Public functions */
+u8 omap2_init_dpll_parent(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ u32 v;
+ struct dpll_data *dd;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ v &= dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+
+ /* Reparent the struct clk in case the dpll is in bypass */
+ if (_omap2_dpll_is_in_bypass(v))
+ return 1;
+
+ return 0;
+}
+
+/**
+ * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
+ * @clk: struct clk * of a DPLL
+ *
+ * DPLLs can be locked or bypassed - basically, enabled or disabled.
+ * When locked, the DPLL output depends on the M and N values. When
+ * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
+ * or sys_clk. Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
+ * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
+ * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
+ * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
+ * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
+ * if the clock @clk is not a DPLL.
+ */
+unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
+{
+ long long dpll_clk;
+ u32 dpll_mult, dpll_div, v;
+ struct dpll_data *dd;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return 0;
+
+ /* Return bypass rate if DPLL is bypassed */
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ v &= dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+
+ if (_omap2_dpll_is_in_bypass(v))
+ return __clk_get_rate(dd->clk_bypass);
+
+ v = ti_clk_ll_ops->clk_readl(dd->mult_div1_reg);
+ dpll_mult = v & dd->mult_mask;
+ dpll_mult >>= __ffs(dd->mult_mask);
+ dpll_div = v & dd->div1_mask;
+ dpll_div >>= __ffs(dd->div1_mask);
+
+ dpll_clk = (long long)__clk_get_rate(dd->clk_ref) * dpll_mult;
+ do_div(dpll_clk, dpll_div + 1);
+
+ return dpll_clk;
+}
+
+/* DPLL rate rounding code */
+
+/**
+ * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
+ * @clk: struct clk * for a DPLL
+ * @target_rate: desired DPLL clock rate
+ *
+ * Given a DPLL and a desired target rate, round the target rate to a
+ * possible, programmable rate for this DPLL. Attempts to select the
+ * minimum possible n. Stores the computed (m, n) in the DPLL's
+ * dpll_data structure so set_rate() will not need to call this
+ * (expensive) function again. Returns ~0 if the target rate cannot
+ * be rounded, or the rounded rate upon success.
+ */
+long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
+ unsigned long *parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ int m, n, r, scaled_max_m;
+ int min_delta_m = INT_MAX, min_delta_n = INT_MAX;
+ unsigned long scaled_rt_rp;
+ unsigned long new_rate = 0;
+ struct dpll_data *dd;
+ unsigned long ref_rate;
+ long delta;
+ long prev_min_delta = LONG_MAX;
+ const char *clk_name;
+
+ if (!clk || !clk->dpll_data)
+ return ~0;
+
+ dd = clk->dpll_data;
+
+ ref_rate = __clk_get_rate(dd->clk_ref);
+ clk_name = __clk_get_name(hw->clk);
+ pr_debug("clock: %s: starting DPLL round_rate, target rate %lu\n",
+ clk_name, target_rate);
+
+ scaled_rt_rp = target_rate / (ref_rate / DPLL_SCALE_FACTOR);
+ scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
+
+ dd->last_rounded_rate = 0;
+
+ for (n = dd->min_divider; n <= dd->max_divider; n++) {
+ /* Is the (input clk, divider) pair valid for the DPLL? */
+ r = _dpll_test_fint(clk, n);
+ if (r == DPLL_FINT_UNDERFLOW)
+ break;
+ else if (r == DPLL_FINT_INVALID)
+ continue;
+
+ /* Compute the scaled DPLL multiplier, based on the divider */
+ m = scaled_rt_rp * n;
+
+ /*
+ * Since we're counting n up, a m overflow means we
+ * can bail out completely (since as n increases in
+ * the next iteration, there's no way that m can
+ * increase beyond the current m)
+ */
+ if (m > scaled_max_m)
+ break;
+
+ r = _dpll_test_mult(&m, n, &new_rate, target_rate,
+ ref_rate);
+
+ /* m can't be set low enough for this n - try with a larger n */
+ if (r == DPLL_MULT_UNDERFLOW)
+ continue;
+
+ /* skip rates above our target rate */
+ delta = target_rate - new_rate;
+ if (delta < 0)
+ continue;
+
+ if (delta < prev_min_delta) {
+ prev_min_delta = delta;
+ min_delta_m = m;
+ min_delta_n = n;
+ }
+
+ pr_debug("clock: %s: m = %d: n = %d: new_rate = %lu\n",
+ clk_name, m, n, new_rate);
+
+ if (delta == 0)
+ break;
+ }
+
+ if (prev_min_delta == LONG_MAX) {
+ pr_debug("clock: %s: cannot round to rate %lu\n",
+ clk_name, target_rate);
+ return ~0;
+ }
+
+ dd->last_rounded_m = min_delta_m;
+ dd->last_rounded_n = min_delta_n;
+ dd->last_rounded_rate = target_rate - prev_min_delta;
+
+ return dd->last_rounded_rate;
+}
--- /dev/null
+/*
+ * OMAP2/3 interface clock control
+ *
+ * Copyright (C) 2011 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/clk/ti.h>
+
+#include "clock.h"
+
+/* Register offsets */
+#define OMAP24XX_CM_FCLKEN2 0x04
+#define CM_AUTOIDLE 0x30
+#define CM_ICLKEN 0x10
+#define CM_IDLEST 0x20
+
+#define OMAP24XX_CM_IDLEST_VAL 0
+
+/* Private functions */
+
+/* XXX */
+void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk)
+{
+ u32 v;
+ void __iomem *r;
+
+ r = (__force void __iomem *)
+ ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
+
+ v = ti_clk_ll_ops->clk_readl(r);
+ v |= (1 << clk->enable_bit);
+ ti_clk_ll_ops->clk_writel(v, r);
+}
+
+/* XXX */
+void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk)
+{
+ u32 v;
+ void __iomem *r;
+
+ r = (__force void __iomem *)
+ ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
+
+ v = ti_clk_ll_ops->clk_readl(r);
+ v &= ~(1 << clk->enable_bit);
+ ti_clk_ll_ops->clk_writel(v, r);
+}
+
+/**
+ * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
+ * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function
+ * passes back the correct CM_IDLEST register address for I2CHS
+ * modules. No return value.
+ */
+static void omap2430_clk_i2chs_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = ((__force u32)clk->enable_reg ^ (OMAP24XX_CM_FCLKEN2 ^ CM_IDLEST));
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = clk->enable_bit;
+ *idlest_val = OMAP24XX_CM_IDLEST_VAL;
+}
+
+/* Public data */
+
+const struct clk_hw_omap_ops clkhwops_iclk = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+};
+
+const struct clk_hw_omap_ops clkhwops_iclk_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = omap2_clk_dflt_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+/* 2430 I2CHS has non-standard IDLEST register */
+const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait = {
+ .find_idlest = omap2430_clk_i2chs_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
u8 recal_st_bit;
};
+/* Composite clock component types */
+enum {
+ CLK_COMPONENT_TYPE_GATE = 0,
+ CLK_COMPONENT_TYPE_DIVIDER,
+ CLK_COMPONENT_TYPE_MUX,
+ CLK_COMPONENT_TYPE_MAX,
+};
+
+/**
+ * struct ti_dt_clk - OMAP DT clock alias declarations
+ * @lk: clock lookup definition
+ * @node_name: clock DT node to map to
+ */
+struct ti_dt_clk {
+ struct clk_lookup lk;
+ char *node_name;
+};
+
+#define DT_CLK(dev, con, name) \
+ { \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ }, \
+ .node_name = name, \
+ }
+
+typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *);
+
struct clk *ti_clk_register_gate(struct ti_clk *setup);
struct clk *ti_clk_register_interface(struct ti_clk *setup);
struct clk *ti_clk_register_mux(struct ti_clk *setup);
struct clk *ti_clk_register_clk(struct ti_clk *setup);
int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
+void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
+void ti_dt_clocks_register(struct ti_dt_clk *oclks);
+int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
+ ti_of_clk_init_cb_t func);
+int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
+
+void omap2_init_clk_hw_omap_clocks(struct clk *clk);
+int of_ti_clk_autoidle_setup(struct device_node *node);
+void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
+
+extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
+extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
+extern const struct clk_hw_omap_ops clkhwops_wait;
+extern const struct clk_hw_omap_ops clkhwops_iclk;
+extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
+extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
+extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
+
+extern const struct clk_ops ti_clk_divider_ops;
+extern const struct clk_ops ti_clk_mux_ops;
+
+int omap2_clkops_enable_clkdm(struct clk_hw *hw);
+void omap2_clkops_disable_clkdm(struct clk_hw *hw);
+
+int omap2_dflt_clk_enable(struct clk_hw *hw);
+void omap2_dflt_clk_disable(struct clk_hw *hw);
+int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
+void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
+ void __iomem **other_reg,
+ u8 *other_bit);
+void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit, u8 *idlest_val);
+
+void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
+void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
+
+u8 omap2_init_dpll_parent(struct clk_hw *hw);
+int omap3_noncore_dpll_enable(struct clk_hw *hw);
+void omap3_noncore_dpll_disable(struct clk_hw *hw);
+int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index);
+int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate);
+int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate,
+ u8 index);
+int omap3_noncore_dpll_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req);
+long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
+ unsigned long *parent_rate);
+unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
+ unsigned long parent_rate);
+
+unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
+int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
+ unsigned long parent_rate);
+int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate, u8 index);
+void omap3_clk_lock_dpll5(void);
+
+unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
+ unsigned long parent_rate);
+long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
+ unsigned long target_rate,
+ unsigned long *parent_rate);
+int omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req);
+
+extern struct ti_clk_ll_ops *ti_clk_ll_ops;
+
#endif
* GNU General Public License for more details.
*/
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
#undef pr_fmt
#define pr_fmt(fmt) "%s: " fmt, __func__
+/**
+ * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw
+ * @hw: struct clk_hw * of the clock being enabled
+ *
+ * Increment the usecount of the clockdomain of the clock pointed to
+ * by @hw; if the usecount is 1, the clockdomain will be "enabled."
+ * Only needed for clocks that don't use omap2_dflt_clk_enable() as
+ * their enable function pointer. Passes along the return value of
+ * clkdm_clk_enable(), -EINVAL if @hw is not associated with a
+ * clockdomain, or 0 if clock framework-based clockdomain control is
+ * not implemented.
+ */
+int omap2_clkops_enable_clkdm(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk;
+ int ret = 0;
+
+ clk = to_clk_hw_omap(hw);
+
+ if (unlikely(!clk->clkdm)) {
+ pr_err("%s: %s: no clkdm set ?!\n", __func__,
+ __clk_get_name(hw->clk));
+ return -EINVAL;
+ }
+
+ if (unlikely(clk->enable_reg))
+ pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
+ __clk_get_name(hw->clk));
+
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
+ pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
+ __func__, __clk_get_name(hw->clk));
+ return 0;
+ }
+
+ ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+ WARN(ret, "%s: could not enable %s's clockdomain %s: %d\n",
+ __func__, __clk_get_name(hw->clk), clk->clkdm_name, ret);
+
+ return ret;
+}
+
+/**
+ * omap2_clkops_disable_clkdm - decrement usecount on clkdm of @hw
+ * @hw: struct clk_hw * of the clock being disabled
+ *
+ * Decrement the usecount of the clockdomain of the clock pointed to
+ * by @hw; if the usecount is 0, the clockdomain will be "disabled."
+ * Only needed for clocks that don't use omap2_dflt_clk_disable() as their
+ * disable function pointer. No return value.
+ */
+void omap2_clkops_disable_clkdm(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk;
+
+ clk = to_clk_hw_omap(hw);
+
+ if (unlikely(!clk->clkdm)) {
+ pr_err("%s: %s: no clkdm set ?!\n", __func__,
+ __clk_get_name(hw->clk));
+ return;
+ }
+
+ if (unlikely(clk->enable_reg))
+ pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
+ __clk_get_name(hw->clk));
+
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
+ pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
+ __func__, __clk_get_name(hw->clk));
+ return;
+ }
+
+ ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
static void __init of_ti_clockdomain_setup(struct device_node *node)
{
struct clk *clk;
int num_parents;
const char **parent_names;
struct component_clk *clk;
- int i;
num_parents = of_clk_get_parent_count(node);
if (!parent_names)
return -ENOMEM;
- for (i = 0; i < num_parents; i++)
- parent_names[i] = of_clk_get_parent_name(node, i);
+ of_clk_parent_fill(node, parent_names, num_parents);
clk = kzalloc(sizeof(*clk), GFP_KERNEL);
if (!clk) {
* GNU General Public License for more details.
*/
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/slab.h>
#include <linux/err.h>
struct clk_init_data *init = NULL;
const char **parent_names = NULL;
struct dpll_data *dd = NULL;
- int i;
u8 dpll_mode = 0;
dd = kzalloc(sizeof(*dd), GFP_KERNEL);
if (!parent_names)
goto cleanup;
- for (i = 0; i < init->num_parents; i++)
- parent_names[i] = of_clk_get_parent_name(node, i);
+ of_clk_parent_fill(node, parent_names, init->num_parents);
init->parent_names = parent_names;
--- /dev/null
+/*
+ * OMAP3/4 - specific DPLL control functions
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ * Testing and integration fixes by Jouni Högander
+ *
+ * 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth
+ * Menon
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/clkdev.h>
+#include <linux/clk/ti.h>
+
+#include "clock.h"
+
+/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
+#define DPLL_AUTOIDLE_DISABLE 0x0
+#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1
+
+#define MAX_DPLL_WAIT_TRIES 1000000
+
+#define OMAP3XXX_EN_DPLL_LOCKED 0x7
+
+/* Forward declarations */
+static u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk);
+static void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
+static void omap3_dpll_allow_idle(struct clk_hw_omap *clk);
+
+/* Private functions */
+
+/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
+static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ dd = clk->dpll_data;
+
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ v &= ~dd->enable_mask;
+ v |= clken_bits << __ffs(dd->enable_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+}
+
+/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
+static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state)
+{
+ const struct dpll_data *dd;
+ int i = 0;
+ int ret = -EINVAL;
+ const char *clk_name;
+
+ dd = clk->dpll_data;
+ clk_name = __clk_get_name(clk->hw.clk);
+
+ state <<= __ffs(dd->idlest_mask);
+
+ while (((ti_clk_ll_ops->clk_readl(dd->idlest_reg) & dd->idlest_mask)
+ != state) && i < MAX_DPLL_WAIT_TRIES) {
+ i++;
+ udelay(1);
+ }
+
+ if (i == MAX_DPLL_WAIT_TRIES) {
+ pr_err("clock: %s failed transition to '%s'\n",
+ clk_name, (state) ? "locked" : "bypassed");
+ } else {
+ pr_debug("clock: %s transition to '%s' in %d loops\n",
+ clk_name, (state) ? "locked" : "bypassed", i);
+
+ ret = 0;
+ }
+
+ return ret;
+}
+
+/* From 3430 TRM ES2 4.7.6.2 */
+static u16 _omap3_dpll_compute_freqsel(struct clk_hw_omap *clk, u8 n)
+{
+ unsigned long fint;
+ u16 f = 0;
+
+ fint = __clk_get_rate(clk->dpll_data->clk_ref) / n;
+
+ pr_debug("clock: fint is %lu\n", fint);
+
+ if (fint >= 750000 && fint <= 1000000)
+ f = 0x3;
+ else if (fint > 1000000 && fint <= 1250000)
+ f = 0x4;
+ else if (fint > 1250000 && fint <= 1500000)
+ f = 0x5;
+ else if (fint > 1500000 && fint <= 1750000)
+ f = 0x6;
+ else if (fint > 1750000 && fint <= 2100000)
+ f = 0x7;
+ else if (fint > 7500000 && fint <= 10000000)
+ f = 0xB;
+ else if (fint > 10000000 && fint <= 12500000)
+ f = 0xC;
+ else if (fint > 12500000 && fint <= 15000000)
+ f = 0xD;
+ else if (fint > 15000000 && fint <= 17500000)
+ f = 0xE;
+ else if (fint > 17500000 && fint <= 21000000)
+ f = 0xF;
+ else
+ pr_debug("clock: unknown freqsel setting for %d\n", n);
+
+ return f;
+}
+
+/*
+ * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to lock. Waits for the DPLL to report
+ * readiness before returning. Will save and restore the DPLL's
+ * autoidle state across the enable, per the CDP code. If the DPLL
+ * locked successfully, return 0; if the DPLL did not lock in the time
+ * allotted, or DPLL3 was passed in, return -EINVAL.
+ */
+static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u8 ai;
+ u8 state = 1;
+ int r = 0;
+
+ pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk->hw.clk));
+
+ dd = clk->dpll_data;
+ state <<= __ffs(dd->idlest_mask);
+
+ /* Check if already locked */
+ if ((ti_clk_ll_ops->clk_readl(dd->idlest_reg) & dd->idlest_mask) ==
+ state)
+ goto done;
+
+ ai = omap3_dpll_autoidle_read(clk);
+
+ if (ai)
+ omap3_dpll_deny_idle(clk);
+
+ _omap3_dpll_write_clken(clk, DPLL_LOCKED);
+
+ r = _omap3_wait_dpll_status(clk, 1);
+
+ if (ai)
+ omap3_dpll_allow_idle(clk);
+
+done:
+ return r;
+}
+
+/*
+ * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power bypass mode. In
+ * bypass mode, the DPLL's rate is set equal to its parent clock's
+ * rate. Waits for the DPLL to report readiness before returning.
+ * Will save and restore the DPLL's autoidle state across the enable,
+ * per the CDP code. If the DPLL entered bypass mode successfully,
+ * return 0; if the DPLL did not enter bypass in the time allotted, or
+ * DPLL3 was passed in, or the DPLL does not support low-power bypass,
+ * return -EINVAL.
+ */
+static int _omap3_noncore_dpll_bypass(struct clk_hw_omap *clk)
+{
+ int r;
+ u8 ai;
+
+ if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
+ return -EINVAL;
+
+ pr_debug("clock: configuring DPLL %s for low-power bypass\n",
+ __clk_get_name(clk->hw.clk));
+
+ ai = omap3_dpll_autoidle_read(clk);
+
+ _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
+
+ r = _omap3_wait_dpll_status(clk, 0);
+
+ if (ai)
+ omap3_dpll_allow_idle(clk);
+
+ return r;
+}
+
+/*
+ * _omap3_noncore_dpll_stop - instruct a DPLL to stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop. Will save and
+ * restore the DPLL's autoidle state across the stop, per the CDP
+ * code. If DPLL3 was passed in, or the DPLL does not support
+ * low-power stop, return -EINVAL; otherwise, return 0.
+ */
+static int _omap3_noncore_dpll_stop(struct clk_hw_omap *clk)
+{
+ u8 ai;
+
+ if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
+ return -EINVAL;
+
+ pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk->hw.clk));
+
+ ai = omap3_dpll_autoidle_read(clk);
+
+ _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
+
+ if (ai)
+ omap3_dpll_allow_idle(clk);
+
+ return 0;
+}
+
+/**
+ * _lookup_dco - Lookup DCO used by j-type DPLL
+ * @clk: pointer to a DPLL struct clk
+ * @dco: digital control oscillator selector
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ *
+ * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
+ *
+ * XXX This code is not needed for 3430/AM35xx; can it be optimized
+ * out in non-multi-OMAP builds for those chips?
+ */
+static void _lookup_dco(struct clk_hw_omap *clk, u8 *dco, u16 m, u8 n)
+{
+ unsigned long fint, clkinp; /* watch out for overflow */
+
+ clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
+ fint = (clkinp / n) * m;
+
+ if (fint < 1000000000)
+ *dco = 2;
+ else
+ *dco = 4;
+}
+
+/**
+ * _lookup_sddiv - Calculate sigma delta divider for j-type DPLL
+ * @clk: pointer to a DPLL struct clk
+ * @sd_div: target sigma-delta divider
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ *
+ * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
+ *
+ * XXX This code is not needed for 3430/AM35xx; can it be optimized
+ * out in non-multi-OMAP builds for those chips?
+ */
+static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
+{
+ unsigned long clkinp, sd; /* watch out for overflow */
+ int mod1, mod2;
+
+ clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
+
+ /*
+ * target sigma-delta to near 250MHz
+ * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)]
+ */
+ clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */
+ mod1 = (clkinp * m) % (250 * n);
+ sd = (clkinp * m) / (250 * n);
+ mod2 = sd % 10;
+ sd /= 10;
+
+ if (mod1 || mod2)
+ sd++;
+ *sd_div = sd;
+}
+
+/*
+ * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
+ * @clk: struct clk * of DPLL to set
+ * @freqsel: FREQSEL value to set
+ *
+ * Program the DPLL with the last M, N values calculated, and wait for
+ * the DPLL to lock. Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
+{
+ struct dpll_data *dd = clk->dpll_data;
+ u8 dco, sd_div;
+ u32 v;
+
+ /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
+ _omap3_noncore_dpll_bypass(clk);
+
+ /*
+ * Set jitter correction. Jitter correction applicable for OMAP343X
+ * only since freqsel field is no longer present on other devices.
+ */
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ v &= ~dd->freqsel_mask;
+ v |= freqsel << __ffs(dd->freqsel_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+ }
+
+ /* Set DPLL multiplier, divider */
+ v = ti_clk_ll_ops->clk_readl(dd->mult_div1_reg);
+
+ /* Handle Duty Cycle Correction */
+ if (dd->dcc_mask) {
+ if (dd->last_rounded_rate >= dd->dcc_rate)
+ v |= dd->dcc_mask; /* Enable DCC */
+ else
+ v &= ~dd->dcc_mask; /* Disable DCC */
+ }
+
+ v &= ~(dd->mult_mask | dd->div1_mask);
+ v |= dd->last_rounded_m << __ffs(dd->mult_mask);
+ v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
+
+ /* Configure dco and sd_div for dplls that have these fields */
+ if (dd->dco_mask) {
+ _lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n);
+ v &= ~(dd->dco_mask);
+ v |= dco << __ffs(dd->dco_mask);
+ }
+ if (dd->sddiv_mask) {
+ _lookup_sddiv(clk, &sd_div, dd->last_rounded_m,
+ dd->last_rounded_n);
+ v &= ~(dd->sddiv_mask);
+ v |= sd_div << __ffs(dd->sddiv_mask);
+ }
+
+ ti_clk_ll_ops->clk_writel(v, dd->mult_div1_reg);
+
+ /* Set 4X multiplier and low-power mode */
+ if (dd->m4xen_mask || dd->lpmode_mask) {
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+
+ if (dd->m4xen_mask) {
+ if (dd->last_rounded_m4xen)
+ v |= dd->m4xen_mask;
+ else
+ v &= ~dd->m4xen_mask;
+ }
+
+ if (dd->lpmode_mask) {
+ if (dd->last_rounded_lpmode)
+ v |= dd->lpmode_mask;
+ else
+ v &= ~dd->lpmode_mask;
+ }
+
+ ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+ }
+
+ /* We let the clock framework set the other output dividers later */
+
+ /* REVISIT: Set ramp-up delay? */
+
+ _omap3_noncore_dpll_lock(clk);
+
+ return 0;
+}
+
+/* Public functions */
+
+/**
+ * omap3_dpll_recalc - recalculate DPLL rate
+ * @clk: DPLL struct clk
+ *
+ * Recalculate and propagate the DPLL rate.
+ */
+unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+
+ return omap2_get_dpll_rate(clk);
+}
+
+/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
+
+/**
+ * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
+ * The choice of modes depends on the DPLL's programmed rate: if it is
+ * the same as the DPLL's parent clock, it will enter bypass;
+ * otherwise, it will enter lock. This code will wait for the DPLL to
+ * indicate readiness before returning, unless the DPLL takes too long
+ * to enter the target state. Intended to be used as the struct clk's
+ * enable function. If DPLL3 was passed in, or the DPLL does not
+ * support low-power stop, or if the DPLL took too long to enter
+ * bypass or lock, return -EINVAL; otherwise, return 0.
+ */
+int omap3_noncore_dpll_enable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ int r;
+ struct dpll_data *dd;
+ struct clk_hw *parent;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (clk->clkdm) {
+ r = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+ if (r) {
+ WARN(1,
+ "%s: could not enable %s's clockdomain %s: %d\n",
+ __func__, __clk_get_name(hw->clk),
+ clk->clkdm_name, r);
+ return r;
+ }
+ }
+
+ parent = __clk_get_hw(__clk_get_parent(hw->clk));
+
+ if (__clk_get_rate(hw->clk) == __clk_get_rate(dd->clk_bypass)) {
+ WARN_ON(parent != __clk_get_hw(dd->clk_bypass));
+ r = _omap3_noncore_dpll_bypass(clk);
+ } else {
+ WARN_ON(parent != __clk_get_hw(dd->clk_ref));
+ r = _omap3_noncore_dpll_lock(clk);
+ }
+
+ return r;
+}
+
+/**
+ * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop. This function is
+ * intended for use in struct clkops. No return value.
+ */
+void omap3_noncore_dpll_disable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+
+ _omap3_noncore_dpll_stop(clk);
+ if (clk->clkdm)
+ ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
+/* Non-CORE DPLL rate set code */
+
+/**
+ * omap3_noncore_dpll_determine_rate - determine rate for a DPLL
+ * @hw: pointer to the clock to determine rate for
+ * @req: target rate request
+ *
+ * Determines which DPLL mode to use for reaching a desired target rate.
+ * Checks whether the DPLL shall be in bypass or locked mode, and if
+ * locked, calculates the M,N values for the DPLL via round-rate.
+ * Returns a 0 on success, negative error value in failure.
+ */
+int omap3_noncore_dpll_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+
+ if (!req->rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (__clk_get_rate(dd->clk_bypass) == req->rate &&
+ (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+ req->best_parent_hw = __clk_get_hw(dd->clk_bypass);
+ } else {
+ req->rate = omap2_dpll_round_rate(hw, req->rate,
+ &req->best_parent_rate);
+ req->best_parent_hw = __clk_get_hw(dd->clk_ref);
+ }
+
+ req->best_parent_rate = req->rate;
+
+ return 0;
+}
+
+/**
+ * omap3_noncore_dpll_set_parent - set parent for a DPLL clock
+ * @hw: pointer to the clock to set parent for
+ * @index: parent index to select
+ *
+ * Sets parent for a DPLL clock. This sets the DPLL into bypass or
+ * locked mode. Returns 0 with success, negative error value otherwise.
+ */
+int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ int ret;
+
+ if (!hw)
+ return -EINVAL;
+
+ if (index)
+ ret = _omap3_noncore_dpll_bypass(clk);
+ else
+ ret = _omap3_noncore_dpll_lock(clk);
+
+ return ret;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate - set rate for a DPLL clock
+ * @hw: pointer to the clock to set parent for
+ * @rate: target rate for the clock
+ * @parent_rate: rate of the parent clock
+ *
+ * Sets rate for a DPLL clock. First checks if the clock parent is
+ * reference clock (in bypass mode, the rate of the clock can't be
+ * changed) and proceeds with the rate change operation. Returns 0
+ * with success, negative error value otherwise.
+ */
+int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+ u16 freqsel = 0;
+ int ret;
+
+ if (!hw || !rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (__clk_get_hw(__clk_get_parent(hw->clk)) !=
+ __clk_get_hw(dd->clk_ref))
+ return -EINVAL;
+
+ if (dd->last_rounded_rate == 0)
+ return -EINVAL;
+
+ /* Freqsel is available only on OMAP343X devices */
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
+ WARN_ON(!freqsel);
+ }
+
+ pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__,
+ __clk_get_name(hw->clk), rate);
+
+ ret = omap3_noncore_dpll_program(clk, freqsel);
+
+ return ret;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate_and_parent - set rate and parent for a DPLL clock
+ * @hw: pointer to the clock to set rate and parent for
+ * @rate: target rate for the DPLL
+ * @parent_rate: clock rate of the DPLL parent
+ * @index: new parent index for the DPLL, 0 - reference, 1 - bypass
+ *
+ * Sets rate and parent for a DPLL clock. If new parent is the bypass
+ * clock, only selects the parent. Otherwise proceeds with a rate
+ * change, as this will effectively also change the parent as the
+ * DPLL is put into locked mode. Returns 0 with success, negative error
+ * value otherwise.
+ */
+int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate,
+ u8 index)
+{
+ int ret;
+
+ if (!hw || !rate)
+ return -EINVAL;
+
+ /*
+ * clk-ref at index[0], in which case we only need to set rate,
+ * the parent will be changed automatically with the lock sequence.
+ * With clk-bypass case we only need to change parent.
+ */
+ if (index)
+ ret = omap3_noncore_dpll_set_parent(hw, index);
+ else
+ ret = omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
+
+ return ret;
+}
+
+/* DPLL autoidle read/set code */
+
+/**
+ * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
+ * @clk: struct clk * of the DPLL to read
+ *
+ * Return the DPLL's autoidle bits, shifted down to bit 0. Returns
+ * -EINVAL if passed a null pointer or if the struct clk does not
+ * appear to refer to a DPLL.
+ */
+static u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ if (!clk || !clk->dpll_data)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+
+ if (!dd->autoidle_reg)
+ return -EINVAL;
+
+ v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+ v &= dd->autoidle_mask;
+ v >>= __ffs(dd->autoidle_mask);
+
+ return v;
+}
+
+/**
+ * omap3_dpll_allow_idle - enable DPLL autoidle bits
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Enable DPLL automatic idle control. This automatic idle mode
+ * switching takes effect only when the DPLL is locked, at least on
+ * OMAP3430. The DPLL will enter low-power stop when its downstream
+ * clocks are gated. No return value.
+ */
+static void omap3_dpll_allow_idle(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ if (!clk || !clk->dpll_data)
+ return;
+
+ dd = clk->dpll_data;
+
+ if (!dd->autoidle_reg)
+ return;
+
+ /*
+ * REVISIT: CORE DPLL can optionally enter low-power bypass
+ * by writing 0x5 instead of 0x1. Add some mechanism to
+ * optionally enter this mode.
+ */
+ v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+ v &= ~dd->autoidle_mask;
+ v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->autoidle_reg);
+}
+
+/**
+ * omap3_dpll_deny_idle - prevent DPLL from automatically idling
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Disable DPLL automatic idle control. No return value.
+ */
+static void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ if (!clk || !clk->dpll_data)
+ return;
+
+ dd = clk->dpll_data;
+
+ if (!dd->autoidle_reg)
+ return;
+
+ v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+ v &= ~dd->autoidle_mask;
+ v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->autoidle_reg);
+}
+
+/* Clock control for DPLL outputs */
+
+/* Find the parent DPLL for the given clkoutx2 clock */
+static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
+{
+ struct clk_hw_omap *pclk = NULL;
+ struct clk *parent;
+
+ /* Walk up the parents of clk, looking for a DPLL */
+ do {
+ do {
+ parent = __clk_get_parent(hw->clk);
+ hw = __clk_get_hw(parent);
+ } while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
+ if (!hw)
+ break;
+ pclk = to_clk_hw_omap(hw);
+ } while (pclk && !pclk->dpll_data);
+
+ /* clk does not have a DPLL as a parent? error in the clock data */
+ if (!pclk) {
+ WARN_ON(1);
+ return NULL;
+ }
+
+ return pclk;
+}
+
+/**
+ * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
+ * @clk: DPLL output struct clk
+ *
+ * Using parent clock DPLL data, look up DPLL state. If locked, set our
+ * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
+ */
+unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ const struct dpll_data *dd;
+ unsigned long rate;
+ u32 v;
+ struct clk_hw_omap *pclk = NULL;
+
+ if (!parent_rate)
+ return 0;
+
+ pclk = omap3_find_clkoutx2_dpll(hw);
+
+ if (!pclk)
+ return 0;
+
+ dd = pclk->dpll_data;
+
+ WARN_ON(!dd->enable_mask);
+
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg) & dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+ if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
+ rate = parent_rate;
+ else
+ rate = parent_rate * 2;
+ return rate;
+}
+
+/* OMAP3/4 non-CORE DPLL clkops */
+const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
+ .allow_idle = omap3_dpll_allow_idle,
+ .deny_idle = omap3_dpll_deny_idle,
+};
+
+/**
+ * omap3_dpll4_set_rate - set rate for omap3 per-dpll
+ * @hw: clock to change
+ * @rate: target rate for clock
+ * @parent_rate: rate of the parent clock
+ *
+ * Check if the current SoC supports the per-dpll reprogram operation
+ * or not, and then do the rate change if supported. Returns -EINVAL
+ * if not supported, 0 for success, and potential error codes from the
+ * clock rate change.
+ */
+int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ /*
+ * According to the 12-5 CDP code from TI, "Limitation 2.5"
+ * on 3430ES1 prevents us from changing DPLL multipliers or dividers
+ * on DPLL4.
+ */
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
+ return -EINVAL;
+ }
+
+ return omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
+}
+
+/**
+ * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll
+ * @hw: clock to change
+ * @rate: target rate for clock
+ * @parent_rate: rate of the parent clock
+ * @index: parent index, 0 - reference clock, 1 - bypass clock
+ *
+ * Check if the current SoC support the per-dpll reprogram operation
+ * or not, and then do the rate + parent change if supported. Returns
+ * -EINVAL if not supported, 0 for success, and potential error codes
+ * from the clock rate change.
+ */
+int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate, u8 index)
+{
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
+ return -EINVAL;
+ }
+
+ return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate,
+ index);
+}
--- /dev/null
+/*
+ * OMAP4-specific DPLL control functions
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Rajendra Nayak
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/clk/ti.h>
+
+#include "clock.h"
+
+/*
+ * Maximum DPLL input frequency (FINT) and output frequency (FOUT) that
+ * can supported when using the DPLL low-power mode. Frequencies are
+ * defined in OMAP4430/60 Public TRM section 3.6.3.3.2 "Enable Control,
+ * Status, and Low-Power Operation Mode".
+ */
+#define OMAP4_DPLL_LP_FINT_MAX 1000000
+#define OMAP4_DPLL_LP_FOUT_MAX 100000000
+
+/*
+ * Bitfield declarations
+ */
+#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK BIT(8)
+#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK BIT(10)
+#define OMAP4430_DPLL_REGM4XEN_MASK BIT(11)
+
+/* Static rate multiplier for OMAP4 REGM4XEN clocks */
+#define OMAP4430_REGM4XEN_MULT 4
+
+static void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk)
+{
+ u32 v;
+ u32 mask;
+
+ if (!clk || !clk->clksel_reg)
+ return;
+
+ mask = clk->flags & CLOCK_CLKOUTX2 ?
+ OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
+ OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
+
+ v = ti_clk_ll_ops->clk_readl(clk->clksel_reg);
+ /* Clear the bit to allow gatectrl */
+ v &= ~mask;
+ ti_clk_ll_ops->clk_writel(v, clk->clksel_reg);
+}
+
+static void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
+{
+ u32 v;
+ u32 mask;
+
+ if (!clk || !clk->clksel_reg)
+ return;
+
+ mask = clk->flags & CLOCK_CLKOUTX2 ?
+ OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
+ OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
+
+ v = ti_clk_ll_ops->clk_readl(clk->clksel_reg);
+ /* Set the bit to deny gatectrl */
+ v |= mask;
+ ti_clk_ll_ops->clk_writel(v, clk->clksel_reg);
+}
+
+const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = {
+ .allow_idle = omap4_dpllmx_allow_gatectrl,
+ .deny_idle = omap4_dpllmx_deny_gatectrl,
+};
+
+/**
+ * omap4_dpll_lpmode_recalc - compute DPLL low-power setting
+ * @dd: pointer to the dpll data structure
+ *
+ * Calculates if low-power mode can be enabled based upon the last
+ * multiplier and divider values calculated. If low-power mode can be
+ * enabled, then the bit to enable low-power mode is stored in the
+ * last_rounded_lpmode variable. This implementation is based upon the
+ * criteria for enabling low-power mode as described in the OMAP4430/60
+ * Public TRM section 3.6.3.3.2 "Enable Control, Status, and Low-Power
+ * Operation Mode".
+ */
+static void omap4_dpll_lpmode_recalc(struct dpll_data *dd)
+{
+ long fint, fout;
+
+ fint = __clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1);
+ fout = fint * dd->last_rounded_m;
+
+ if ((fint < OMAP4_DPLL_LP_FINT_MAX) && (fout < OMAP4_DPLL_LP_FOUT_MAX))
+ dd->last_rounded_lpmode = 1;
+ else
+ dd->last_rounded_lpmode = 0;
+}
+
+/**
+ * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
+ * @clk: struct clk * of the DPLL to compute the rate for
+ *
+ * Compute the output rate for the OMAP4 DPLL represented by @clk.
+ * Takes the REGM4XEN bit into consideration, which is needed for the
+ * OMAP4 ABE DPLL. Returns the DPLL's output rate (before M-dividers)
+ * upon success, or 0 upon error.
+ */
+unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ u32 v;
+ unsigned long rate;
+ struct dpll_data *dd;
+
+ if (!clk || !clk->dpll_data)
+ return 0;
+
+ dd = clk->dpll_data;
+
+ rate = omap2_get_dpll_rate(clk);
+
+ /* regm4xen adds a multiplier of 4 to DPLL calculations */
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ if (v & OMAP4430_DPLL_REGM4XEN_MASK)
+ rate *= OMAP4430_REGM4XEN_MULT;
+
+ return rate;
+}
+
+/**
+ * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit
+ * @clk: struct clk * of the DPLL to round a rate for
+ * @target_rate: the desired rate of the DPLL
+ *
+ * Compute the rate that would be programmed into the DPLL hardware
+ * for @clk if set_rate() were to be provided with the rate
+ * @target_rate. Takes the REGM4XEN bit into consideration, which is
+ * needed for the OMAP4 ABE DPLL. Returns the rounded rate (before
+ * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or
+ * ~0 if an error occurred in omap2_dpll_round_rate().
+ */
+long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
+ unsigned long target_rate,
+ unsigned long *parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+ long r;
+
+ if (!clk || !clk->dpll_data)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+
+ dd->last_rounded_m4xen = 0;
+
+ /*
+ * First try to compute the DPLL configuration for
+ * target rate without using the 4X multiplier.
+ */
+ r = omap2_dpll_round_rate(hw, target_rate, NULL);
+ if (r != ~0)
+ goto out;
+
+ /*
+ * If we did not find a valid DPLL configuration, try again, but
+ * this time see if using the 4X multiplier can help. Enabling the
+ * 4X multiplier is equivalent to dividing the target rate by 4.
+ */
+ r = omap2_dpll_round_rate(hw, target_rate / OMAP4430_REGM4XEN_MULT,
+ NULL);
+ if (r == ~0)
+ return r;
+
+ dd->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
+ dd->last_rounded_m4xen = 1;
+
+out:
+ omap4_dpll_lpmode_recalc(dd);
+
+ return dd->last_rounded_rate;
+}
+
+/**
+ * omap4_dpll_regm4xen_determine_rate - determine rate for a DPLL
+ * @hw: pointer to the clock to determine rate for
+ * @req: target rate request
+ *
+ * Determines which DPLL mode to use for reaching a desired rate.
+ * Checks whether the DPLL shall be in bypass or locked mode, and if
+ * locked, calculates the M,N values for the DPLL via round-rate.
+ * Returns 0 on success and a negative error value otherwise.
+ */
+int omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+
+ if (!req->rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (__clk_get_rate(dd->clk_bypass) == req->rate &&
+ (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+ req->best_parent_hw = __clk_get_hw(dd->clk_bypass);
+ } else {
+ req->rate = omap4_dpll_regm4xen_round_rate(hw, req->rate,
+ &req->best_parent_rate);
+ req->best_parent_hw = __clk_get_hw(dd->clk_ref);
+ }
+
+ req->best_parent_rate = req->rate;
+
+ return 0;
+}
* GNU General Public License for more details.
*/
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/err.h>
goto free;
}
- parent_name[0] = of_clk_get_parent_name(node, 0);
- parent_name[1] = of_clk_get_parent_name(node, 1);
+ of_clk_parent_fill(node, parent_name, 2);
init->parent_names = parent_name;
fd->clk_ref = of_clk_get(node, 0);
#include <linux/of_address.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
#undef pr_fmt
#define pr_fmt(fmt) "%s: " fmt, __func__
void __iomem *reg;
int num_parents;
const char **parent_names;
- int i;
u8 clk_mux_flags = 0;
u32 mask = 0;
u32 shift = 0;
if (!parent_names)
goto cleanup;
- for (i = 0; i < num_parents; i++)
- parent_names[i] = of_clk_get_parent_name(node, i);
+ of_clk_parent_fill(node, parent_names, num_parents);
reg = ti_clk_get_reg_addr(node, 0);
#include <linux/platform_device.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/abx500/ab8500-sysctrl.h>
-#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/mfd/dbx500-prcmu.h>
#ifndef __UX500_CLK_H
#define __UX500_CLK_H
-#include <linux/clk.h>
#include <linux/device.h>
#include <linux/types.h>
+struct clk;
+
struct clk *clk_reg_prcc_pclk(const char *name,
const char *parent_name,
resource_size_t phy_base,
* License terms: GNU General Public License (GPL) version 2
*/
-#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/mfd/dbx500-prcmu.h>
*/
#include <linux/of.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/mfd/dbx500-prcmu.h>
#include <linux/platform_data/clk-ux500.h>
* License terms: GNU General Public License (GPL) version 2
*/
-#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/mfd/dbx500-prcmu.h>
* License terms: GNU General Public License (GPL) version 2
*/
-#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/mfd/dbx500-prcmu.h>
#include <linux/platform_data/clk-ux500.h>
* ICST clock code from the ARM tree should probably be merged into this
* file.
*/
-#include <linux/clk.h>
-#include <linux/clkdev.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/export.h>
#include <linux/err.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
* published by the Free Software Foundation.
*/
#include <linux/clk-provider.h>
-#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/err.h>
#include <linux/io.h>
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/err.h>
#include <linux/io.h>
*/
#include <linux/amba/sp810.h>
-#include <linux/clkdev.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/of.h>
* published by the Free Software Foundation.
*/
#include <linux/clk-provider.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/of_address.h>
*/
#include <linux/clk/zynq.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
*/
#include <linux/clk.h>
-#include <linux/clk-provider.h>
#include <linux/interrupt.h>
#include <linux/clockchips.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/module.h>
#include <linux/spi/pxa2xx_spi.h>
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/dmaengine.h>
*/
#include <linux/platform_device.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_data/simplefb.h>
#include <linux/platform_device.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/of_platform.h>
* GNU General Public License for more details.
*/
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3066A_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK3066A_H
+
#include <dt-bindings/clock/rk3188-cru-common.h>
/* soft-reset indices */
#define SRST_HDMI 96
#define SRST_HDMI_APB 97
#define SRST_CIF1 111
+
+#endif
* GNU General Public License for more details.
*/
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3188_COMMON_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK3188_COMMON_H
+
/* core clocks from */
#define PLL_APLL 1
#define PLL_DPLL 2
#define SRST_PTM1_ATB 141
#define SRST_CTM 142
#define SRST_TS 143
+
+#endif
* GNU General Public License for more details.
*/
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3188_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK3188_H
+
#include <dt-bindings/clock/rk3188-cru-common.h>
/* soft-reset indices */
#define SRST_GPU_BRIDGE 121
#define SRST_CTI3 123
#define SRST_CTI3_APB 124
+
+#endif
* GNU General Public License for more details.
*/
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3288_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK3288_H
+
/* core clocks */
#define PLL_APLL 1
#define PLL_DPLL 2
#define SRST_TSP_CLKIN0 189
#define SRST_TSP_CLKIN1 190
#define SRST_TSP_27M 191
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3368_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK3368_H
+
+/* core clocks */
+#define PLL_APLLB 1
+#define PLL_APLLL 2
+#define PLL_DPLL 3
+#define PLL_CPLL 4
+#define PLL_GPLL 5
+#define PLL_NPLL 6
+#define ARMCLKB 7
+#define ARMCLKL 8
+
+/* sclk gates (special clocks) */
+#define SCLK_GPU_CORE 64
+#define SCLK_SPI0 65
+#define SCLK_SPI1 66
+#define SCLK_SPI2 67
+#define SCLK_SDMMC 68
+#define SCLK_SDIO0 69
+#define SCLK_EMMC 71
+#define SCLK_TSADC 72
+#define SCLK_SARADC 73
+#define SCLK_NANDC0 75
+#define SCLK_UART0 77
+#define SCLK_UART1 78
+#define SCLK_UART2 79
+#define SCLK_UART3 80
+#define SCLK_UART4 81
+#define SCLK_I2S_8CH 82
+#define SCLK_SPDIF_8CH 83
+#define SCLK_I2S_2CH 84
+#define SCLK_TIMER0 85
+#define SCLK_TIMER1 86
+#define SCLK_TIMER2 87
+#define SCLK_TIMER3 88
+#define SCLK_TIMER4 89
+#define SCLK_TIMER5 90
+#define SCLK_TIMER6 91
+#define SCLK_OTGPHY0 93
+#define SCLK_OTG_ADP 96
+#define SCLK_HSICPHY480M 97
+#define SCLK_HSICPHY12M 98
+#define SCLK_MACREF 99
+#define SCLK_VOP0_PWM 100
+#define SCLK_MAC_RX 102
+#define SCLK_MAC_TX 103
+#define SCLK_EDP_24M 104
+#define SCLK_EDP 105
+#define SCLK_RGA 106
+#define SCLK_ISP 107
+#define SCLK_HDCP 108
+#define SCLK_HDMI_HDCP 109
+#define SCLK_HDMI_CEC 110
+#define SCLK_HEVC_CABAC 111
+#define SCLK_HEVC_CORE 112
+#define SCLK_I2S_8CH_OUT 113
+#define SCLK_SDMMC_DRV 114
+#define SCLK_SDIO0_DRV 115
+#define SCLK_EMMC_DRV 117
+#define SCLK_SDMMC_SAMPLE 118
+#define SCLK_SDIO0_SAMPLE 119
+#define SCLK_EMMC_SAMPLE 121
+#define SCLK_USBPHY480M 122
+#define SCLK_PVTM_CORE 123
+#define SCLK_PVTM_GPU 124
+#define SCLK_PVTM_PMU 125
+#define SCLK_SFC 126
+#define SCLK_MAC 127
+#define SCLK_MACREF_OUT 128
+
+#define DCLK_VOP 190
+#define MCLK_CRYPTO 191
+
+/* aclk gates */
+#define ACLK_GPU_MEM 192
+#define ACLK_GPU_CFG 193
+#define ACLK_DMAC_BUS 194
+#define ACLK_DMAC_PERI 195
+#define ACLK_PERI_MMU 196
+#define ACLK_GMAC 197
+#define ACLK_VOP 198
+#define ACLK_VOP_IEP 199
+#define ACLK_RGA 200
+#define ACLK_HDCP 201
+#define ACLK_IEP 202
+#define ACLK_VIO0_NOC 203
+#define ACLK_VIP 204
+#define ACLK_ISP 205
+#define ACLK_VIO1_NOC 206
+#define ACLK_VIDEO 208
+#define ACLK_BUS 209
+#define ACLK_PERI 210
+
+/* pclk gates */
+#define PCLK_GPIO0 320
+#define PCLK_GPIO1 321
+#define PCLK_GPIO2 322
+#define PCLK_GPIO3 323
+#define PCLK_PMUGRF 324
+#define PCLK_MAILBOX 325
+#define PCLK_GRF 329
+#define PCLK_SGRF 330
+#define PCLK_PMU 331
+#define PCLK_I2C0 332
+#define PCLK_I2C1 333
+#define PCLK_I2C2 334
+#define PCLK_I2C3 335
+#define PCLK_I2C4 336
+#define PCLK_I2C5 337
+#define PCLK_SPI0 338
+#define PCLK_SPI1 339
+#define PCLK_SPI2 340
+#define PCLK_UART0 341
+#define PCLK_UART1 342
+#define PCLK_UART2 343
+#define PCLK_UART3 344
+#define PCLK_UART4 345
+#define PCLK_TSADC 346
+#define PCLK_SARADC 347
+#define PCLK_SIM 348
+#define PCLK_GMAC 349
+#define PCLK_PWM0 350
+#define PCLK_PWM1 351
+#define PCLK_TIMER0 353
+#define PCLK_TIMER1 354
+#define PCLK_EDP_CTRL 355
+#define PCLK_MIPI_DSI0 356
+#define PCLK_MIPI_CSI 358
+#define PCLK_HDCP 359
+#define PCLK_HDMI_CTRL 360
+#define PCLK_VIO_H2P 361
+#define PCLK_BUS 362
+#define PCLK_PERI 363
+#define PCLK_DDRUPCTL 364
+#define PCLK_DDRPHY 365
+#define PCLK_ISP 366
+#define PCLK_VIP 367
+#define PCLK_WDT 368
+
+/* hclk gates */
+#define HCLK_SFC 448
+#define HCLK_OTG0 449
+#define HCLK_HOST0 450
+#define HCLK_HOST1 451
+#define HCLK_HSIC 452
+#define HCLK_NANDC0 453
+#define HCLK_TSP 455
+#define HCLK_SDMMC 456
+#define HCLK_SDIO0 457
+#define HCLK_EMMC 459
+#define HCLK_HSADC 460
+#define HCLK_CRYPTO 461
+#define HCLK_I2S_2CH 462
+#define HCLK_I2S_8CH 463
+#define HCLK_SPDIF 464
+#define HCLK_VOP 465
+#define HCLK_ROM 467
+#define HCLK_IEP 468
+#define HCLK_ISP 469
+#define HCLK_RGA 470
+#define HCLK_VIO_AHB_ARBI 471
+#define HCLK_VIO_NOC 472
+#define HCLK_VIP 473
+#define HCLK_VIO_H2P 474
+#define HCLK_VIO_HDCPMMU 475
+#define HCLK_VIDEO 476
+#define HCLK_BUS 477
+#define HCLK_PERI 478
+
+#define CLK_NR_CLKS (HCLK_PERI + 1)
+
+/* soft-reset indices */
+#define SRST_CORE_B0 0
+#define SRST_CORE_B1 1
+#define SRST_CORE_B2 2
+#define SRST_CORE_B3 3
+#define SRST_CORE_B0_PO 4
+#define SRST_CORE_B1_PO 5
+#define SRST_CORE_B2_PO 6
+#define SRST_CORE_B3_PO 7
+#define SRST_L2_B 8
+#define SRST_ADB_B 9
+#define SRST_PD_CORE_B_NIU 10
+#define SRST_PDBUS_STRSYS 11
+#define SRST_SOCDBG_B 14
+#define SRST_CORE_B_DBG 15
+
+#define SRST_DMAC1 18
+#define SRST_INTMEM 19
+#define SRST_ROM 20
+#define SRST_SPDIF8CH 21
+#define SRST_I2S8CH 23
+#define SRST_MAILBOX 24
+#define SRST_I2S2CH 25
+#define SRST_EFUSE_256 26
+#define SRST_MCU_SYS 28
+#define SRST_MCU_PO 29
+#define SRST_MCU_NOC 30
+#define SRST_EFUSE 31
+
+#define SRST_GPIO0 32
+#define SRST_GPIO1 33
+#define SRST_GPIO2 34
+#define SRST_GPIO3 35
+#define SRST_GPIO4 36
+#define SRST_PMUGRF 41
+#define SRST_I2C0 42
+#define SRST_I2C1 43
+#define SRST_I2C2 44
+#define SRST_I2C3 45
+#define SRST_I2C4 46
+#define SRST_I2C5 47
+
+#define SRST_DWPWM 48
+#define SRST_MMC_PERI 49
+#define SRST_PERIPH_MMU 50
+#define SRST_GRF 55
+#define SRST_PMU 56
+#define SRST_PERIPH_AXI 57
+#define SRST_PERIPH_AHB 58
+#define SRST_PERIPH_APB 59
+#define SRST_PERIPH_NIU 60
+#define SRST_PDPERI_AHB_ARBI 61
+#define SRST_EMEM 62
+#define SRST_USB_PERI 63
+
+#define SRST_DMAC2 64
+#define SRST_MAC 66
+#define SRST_GPS 67
+#define SRST_RKPWM 69
+#define SRST_USBHOST0 72
+#define SRST_HSIC 73
+#define SRST_HSIC_AUX 74
+#define SRST_HSIC_PHY 75
+#define SRST_HSADC 76
+#define SRST_NANDC0 77
+#define SRST_SFC 79
+
+#define SRST_SPI0 83
+#define SRST_SPI1 84
+#define SRST_SPI2 85
+#define SRST_SARADC 87
+#define SRST_PDALIVE_NIU 88
+#define SRST_PDPMU_INTMEM 89
+#define SRST_PDPMU_NIU 90
+#define SRST_SGRF 91
+
+#define SRST_VIO_ARBI 96
+#define SRST_RGA_NIU 97
+#define SRST_VIO0_NIU_AXI 98
+#define SRST_VIO_NIU_AHB 99
+#define SRST_LCDC0_AXI 100
+#define SRST_LCDC0_AHB 101
+#define SRST_LCDC0_DCLK 102
+#define SRST_VIP 104
+#define SRST_RGA_CORE 105
+#define SRST_IEP_AXI 106
+#define SRST_IEP_AHB 107
+#define SRST_RGA_AXI 108
+#define SRST_RGA_AHB 109
+#define SRST_ISP 110
+#define SRST_EDP_24M 111
+
+#define SRST_VIDEO_AXI 112
+#define SRST_VIDEO_AHB 113
+#define SRST_MIPIDPHYTX 114
+#define SRST_MIPIDSI0 115
+#define SRST_MIPIDPHYRX 116
+#define SRST_MIPICSI 117
+#define SRST_GPU 120
+#define SRST_HDMI 121
+#define SRST_EDP 122
+#define SRST_PMU_PVTM 123
+#define SRST_CORE_PVTM 124
+#define SRST_GPU_PVTM 125
+#define SRST_GPU_SYS 126
+#define SRST_GPU_MEM_NIU 127
+
+#define SRST_MMC0 128
+#define SRST_SDIO0 129
+#define SRST_EMMC 131
+#define SRST_USBOTG_AHB 132
+#define SRST_USBOTG_PHY 133
+#define SRST_USBOTG_CON 134
+#define SRST_USBHOST0_AHB 135
+#define SRST_USBHOST0_PHY 136
+#define SRST_USBHOST0_CON 137
+#define SRST_USBOTG_UTMI 138
+#define SRST_USBHOST1_UTMI 139
+#define SRST_USB_ADP 141
+
+#define SRST_CORESIGHT 144
+#define SRST_PD_CORE_AHB_NOC 145
+#define SRST_PD_CORE_APB_NOC 146
+#define SRST_GIC 148
+#define SRST_LCDC_PWM0 149
+#define SRST_RGA_H2P_BRG 153
+#define SRST_VIDEO 154
+#define SRST_GPU_CFG_NIU 157
+#define SRST_TSADC 159
+
+#define SRST_DDRPHY0 160
+#define SRST_DDRPHY0_APB 161
+#define SRST_DDRCTRL0 162
+#define SRST_DDRCTRL0_APB 163
+#define SRST_VIDEO_NIU 165
+#define SRST_VIDEO_NIU_AHB 167
+#define SRST_DDRMSCH0 170
+#define SRST_PDBUS_AHB 173
+#define SRST_CRYPTO 174
+
+#define SRST_UART0 179
+#define SRST_UART1 180
+#define SRST_UART2 181
+#define SRST_UART3 182
+#define SRST_UART4 183
+#define SRST_SIMC 186
+#define SRST_TSP 188
+#define SRST_TSP_CLKIN0 189
+
+#define SRST_CORE_L0 192
+#define SRST_CORE_L1 193
+#define SRST_CORE_L2 194
+#define SRST_CORE_L3 195
+#define SRST_CORE_L0_PO 195
+#define SRST_CORE_L1_PO 197
+#define SRST_CORE_L2_PO 198
+#define SRST_CORE_L3_PO 199
+#define SRST_L2_L 200
+#define SRST_ADB_L 201
+#define SRST_PD_CORE_L_NIU 202
+#define SRST_CCI_SYS 203
+#define SRST_CCI_DDR 204
+#define SRST_CCI 205
+#define SRST_SOCDBG_L 206
+#define SRST_CORE_L_DBG 207
+
+#define SRST_CORE_B0_NC 208
+#define SRST_CORE_B0_PO_NC 209
+#define SRST_L2_B_NC 210
+#define SRST_ADB_B_NC 211
+#define SRST_PD_CORE_B_NIU_NC 212
+#define SRST_PDBUS_STRSYS_NC 213
+#define SRST_CORE_L0_NC 214
+#define SRST_CORE_L0_PO_NC 215
+#define SRST_L2_L_NC 216
+#define SRST_ADB_L_NC 217
+#define SRST_PD_CORE_L_NIU_NC 218
+#define SRST_CCI_SYS_NC 219
+#define SRST_CCI_DDR_NC 220
+#define SRST_CCI_NC 221
+#define SRST_TRACE_NC 222
+
+#define SRST_TIMER00 224
+#define SRST_TIMER01 225
+#define SRST_TIMER02 226
+#define SRST_TIMER03 227
+#define SRST_TIMER04 228
+#define SRST_TIMER05 229
+#define SRST_TIMER10 230
+#define SRST_TIMER11 231
+#define SRST_TIMER12 232
+#define SRST_TIMER13 233
+#define SRST_TIMER14 234
+#define SRST_TIMER15 235
+#define SRST_TIMER0_APB 236
+#define SRST_TIMER1_APB 237
+
+#endif
#ifndef __LINUX_CLK_PROVIDER_H
#define __LINUX_CLK_PROVIDER_H
-#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
#define CLK_GET_ACCURACY_NOCACHE BIT(8) /* do not use the cached clk accuracy */
#define CLK_RECALC_NEW_RATES BIT(9) /* recalc rates after notifications */
+struct clk;
struct clk_hw;
struct clk_core;
struct dentry;
+/**
+ * struct clk_rate_request - Structure encoding the clk constraints that
+ * a clock user might require.
+ *
+ * @rate: Requested clock rate. This field will be adjusted by
+ * clock drivers according to hardware capabilities.
+ * @min_rate: Minimum rate imposed by clk users.
+ * @max_rate: Maximum rate a imposed by clk users.
+ * @best_parent_rate: The best parent rate a parent can provide to fulfill the
+ * requested constraints.
+ * @best_parent_hw: The most appropriate parent clock that fulfills the
+ * requested constraints.
+ *
+ */
+struct clk_rate_request {
+ unsigned long rate;
+ unsigned long min_rate;
+ unsigned long max_rate;
+ unsigned long best_parent_rate;
+ struct clk_hw *best_parent_hw;
+};
+
/**
* struct clk_ops - Callback operations for hardware clocks; these are to
* be provided by the clock implementation, and will be called by drivers
unsigned long parent_rate);
long (*round_rate)(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate);
- long (*determine_rate)(struct clk_hw *hw,
- unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_hw);
+ int (*determine_rate)(struct clk_hw *hw,
+ struct clk_rate_request *req);
int (*set_parent)(struct clk_hw *hw, u8 index);
u8 (*get_parent)(struct clk_hw *hw);
int (*set_rate)(struct clk_hw *hw, unsigned long rate,
* to the closest integer instead of the up one.
* CLK_DIVIDER_READ_ONLY - The divider settings are preconfigured and should
* not be changed by the clock framework.
+ * CLK_DIVIDER_MAX_AT_ZERO - For dividers which are like CLK_DIVIDER_ONE_BASED
+ * except when the value read from the register is zero, the divisor is
+ * 2^width of the field.
*/
struct clk_divider {
struct clk_hw hw;
#define CLK_DIVIDER_HIWORD_MASK BIT(3)
#define CLK_DIVIDER_ROUND_CLOSEST BIT(4)
#define CLK_DIVIDER_READ_ONLY BIT(5)
+#define CLK_DIVIDER_MAX_AT_ZERO BIT(6)
extern const struct clk_ops clk_divider_ops;
void of_gpio_clk_gate_setup(struct device_node *node);
+/**
+ * struct clk_gpio_mux - gpio controlled clock multiplexer
+ *
+ * @hw: see struct clk_gpio
+ * @gpiod: gpio descriptor to select the parent of this clock multiplexer
+ *
+ * Clock with a gpio control for selecting the parent clock.
+ * Implements .get_parent, .set_parent and .determine_rate
+ */
+
+extern const struct clk_ops clk_gpio_mux_ops;
+struct clk *clk_register_gpio_mux(struct device *dev, const char *name,
+ const char **parent_names, u8 num_parents, unsigned gpio,
+ bool active_low, unsigned long flags);
+
+void of_gpio_mux_clk_setup(struct device_node *node);
+
/**
* clk_register - allocate a new clock, register it and return an opaque cookie
* @dev: device that is registering this clock
bool __clk_is_prepared(struct clk *clk);
bool __clk_is_enabled(struct clk *clk);
struct clk *__clk_lookup(const char *name);
-long __clk_mux_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_p);
-unsigned long __clk_determine_rate(struct clk_hw *core,
- unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate);
-long __clk_mux_determine_rate_closest(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_p);
+int __clk_mux_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req);
+int __clk_determine_rate(struct clk_hw *core, struct clk_rate_request *req);
+int __clk_mux_determine_rate_closest(struct clk_hw *hw,
+ struct clk_rate_request *req);
void clk_hw_reparent(struct clk_hw *hw, struct clk_hw *new_parent);
+void clk_hw_set_rate_range(struct clk_hw *hw, unsigned long min_rate,
+ unsigned long max_rate);
static inline void __clk_hw_set_clk(struct clk_hw *dst, struct clk_hw *src)
{
#ifndef __LINUX_CLK_TEGRA_H_
#define __LINUX_CLK_TEGRA_H_
-#include <linux/clk.h>
+#include <linux/types.h>
+#include <linux/bug.h>
/*
* Tegra CPU clock and reset control ops
/* DPLL Type and DCO Selection Flags */
#define DPLL_J_TYPE 0x1
-/* Composite clock component types */
-enum {
- CLK_COMPONENT_TYPE_GATE = 0,
- CLK_COMPONENT_TYPE_DIVIDER,
- CLK_COMPONENT_TYPE_MUX,
- CLK_COMPONENT_TYPE_MAX,
-};
-
-/**
- * struct ti_dt_clk - OMAP DT clock alias declarations
- * @lk: clock lookup definition
- * @node_name: clock DT node to map to
- */
-struct ti_dt_clk {
- struct clk_lookup lk;
- char *node_name;
-};
-
-#define DT_CLK(dev, con, name) \
- { \
- .lk = { \
- .dev_id = dev, \
- .con_id = con, \
- }, \
- .node_name = name, \
- }
-
/* Static memmap indices */
enum {
TI_CLKM_CM = 0,
CLK_MAX_MEMMAPS
};
-typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *);
-
/**
* struct clk_omap_reg - OMAP register declaration
* @offset: offset from the master IP module base address
};
/**
- * struct ti_clk_ll_ops - low-level register access ops for a clock
+ * struct ti_clk_ll_ops - low-level ops for clocks
* @clk_readl: pointer to register read function
* @clk_writel: pointer to register write function
+ * @clkdm_clk_enable: pointer to clockdomain enable function
+ * @clkdm_clk_disable: pointer to clockdomain disable function
+ * @cm_wait_module_ready: pointer to CM module wait ready function
+ * @cm_split_idlest_reg: pointer to CM module function to split idlest reg
*
- * Low-level register access ops are generally used by the basic clock types
- * (clk-gate, clk-mux, clk-divider etc.) to provide support for various
- * low-level hardware interfaces (direct MMIO, regmap etc.), but can also be
- * used by other hardware-specific clock drivers if needed.
+ * Low-level ops are generally used by the basic clock types (clk-gate,
+ * clk-mux, clk-divider etc.) to provide support for various low-level
+ * hadrware interfaces (direct MMIO, regmap etc.), and is initialized
+ * by board code. Low-level ops also contain some other platform specific
+ * operations not provided directly by clock drivers.
*/
struct ti_clk_ll_ops {
u32 (*clk_readl)(void __iomem *reg);
void (*clk_writel)(u32 val, void __iomem *reg);
+ int (*clkdm_clk_enable)(struct clockdomain *clkdm, struct clk *clk);
+ int (*clkdm_clk_disable)(struct clockdomain *clkdm,
+ struct clk *clk);
+ int (*cm_wait_module_ready)(u8 part, s16 prcm_mod, u16 idlest_reg,
+ u8 idlest_shift);
+ int (*cm_split_idlest_reg)(void __iomem *idlest_reg, s16 *prcm_inst,
+ u8 *idlest_reg_id);
};
-extern struct ti_clk_ll_ops *ti_clk_ll_ops;
-
-extern const struct clk_ops ti_clk_divider_ops;
-extern const struct clk_ops ti_clk_mux_ops;
-
#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
-void omap2_init_clk_hw_omap_clocks(struct clk *clk);
-int omap3_noncore_dpll_enable(struct clk_hw *hw);
-void omap3_noncore_dpll_disable(struct clk_hw *hw);
-int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index);
-int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate);
-int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
- unsigned long rate,
- unsigned long parent_rate,
- u8 index);
-long omap3_noncore_dpll_determine_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk);
-unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
- unsigned long parent_rate);
-long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
- unsigned long target_rate,
- unsigned long *parent_rate);
-long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk);
-u8 omap2_init_dpll_parent(struct clk_hw *hw);
-unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
-long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
- unsigned long *parent_rate);
void omap2_init_clk_clkdm(struct clk_hw *clk);
-unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
- unsigned long parent_rate);
-int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate);
-long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate);
-int omap2_clkops_enable_clkdm(struct clk_hw *hw);
-void omap2_clkops_disable_clkdm(struct clk_hw *hw);
int omap2_clk_disable_autoidle_all(void);
-void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
-int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
- unsigned long parent_rate);
-int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate, u8 index);
-int omap2_dflt_clk_enable(struct clk_hw *hw);
-void omap2_dflt_clk_disable(struct clk_hw *hw);
-int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
-void omap3_clk_lock_dpll5(void);
+int omap2_clk_enable_autoidle_all(void);
+int omap2_clk_allow_idle(struct clk *clk);
+int omap2_clk_deny_idle(struct clk *clk);
unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
unsigned long parent_rate);
int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate,
unsigned long parent_rate);
void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw);
void omap2xxx_clkt_vps_init(void);
+unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
-void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
-void ti_dt_clocks_register(struct ti_dt_clk *oclks);
-void ti_dt_clk_init_provider(struct device_node *np, int index);
void ti_dt_clk_init_retry_clks(void);
void ti_dt_clockdomains_setup(void);
-int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
- ti_of_clk_init_cb_t func);
-int of_ti_clk_autoidle_setup(struct device_node *node);
-int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
+int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops);
+
+struct regmap;
+
+int omap2_clk_provider_init(struct device_node *parent, int index,
+ struct regmap *syscon, void __iomem *mem);
+void omap2_clk_legacy_provider_init(int index, void __iomem *mem);
int omap3430_dt_clk_init(void);
int omap3630_dt_clk_init(void);
int omap2420_dt_clk_init(void);
int omap2430_dt_clk_init(void);
-#ifdef CONFIG_OF
-void of_ti_clk_allow_autoidle_all(void);
-void of_ti_clk_deny_autoidle_all(void);
-#else
-static inline void of_ti_clk_allow_autoidle_all(void) { }
-static inline void of_ti_clk_deny_autoidle_all(void) { }
-#endif
+struct ti_clk_features {
+ u32 flags;
+ long fint_min;
+ long fint_max;
+ long fint_band1_max;
+ long fint_band2_min;
+ u8 dpll_bypass_vals;
+ u8 cm_idlest_val;
+};
+
+#define TI_CLK_DPLL_HAS_FREQSEL BIT(0)
+#define TI_CLK_DPLL4_DENY_REPROGRAM BIT(1)
+#define TI_CLK_DISABLE_CLKDM_CONTROL BIT(2)
+
+void ti_clk_setup_features(struct ti_clk_features *features);
+const struct ti_clk_features *ti_clk_get_features(void);
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
-extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
-extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
-extern const struct clk_hw_omap_ops clkhwops_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
-extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
-extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
-extern const struct clk_hw_omap_ops clkhwops_iclk;
-extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
#ifdef CONFIG_ATAGS
int omap3430_clk_legacy_init(void);
*/
#include <stdarg.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/module.h> /* for KSYM_SYMBOL_LEN */
#include <linux/types.h>
projects / firefly-linux-kernel-4.4.55.git / commitdiff