emac: ethernet@01c0b000 {
compatible = "allwinner,sun4i-emac";
reg = <0x01c0b000 0x1000>;
- interrupts = <0 55 1>;
+ interrupts = <0 55 4>;
clocks = <&ahb_gates 17>;
status = "disabled";
};
pio: pinctrl@01c20800 {
compatible = "allwinner,sun7i-a20-pinctrl";
reg = <0x01c20800 0x400>;
- interrupts = <0 28 1>;
+ interrupts = <0 28 4>;
clocks = <&apb0_gates 5>;
gpio-controller;
interrupt-controller;
timer@01c20c00 {
compatible = "allwinner,sun4i-timer";
reg = <0x01c20c00 0x90>;
- interrupts = <0 22 1>,
- <0 23 1>,
- <0 24 1>,
- <0 25 1>,
- <0 67 1>,
- <0 68 1>;
+ interrupts = <0 22 4>,
+ <0 23 4>,
+ <0 24 4>,
+ <0 25 4>,
+ <0 67 4>,
+ <0 68 4>;
clocks = <&osc24M>;
};
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
- interrupts = <0 1 1>;
+ interrupts = <0 1 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 16>;
uart1: serial@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
- interrupts = <0 2 1>;
+ interrupts = <0 2 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 17>;
uart2: serial@01c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
- interrupts = <0 3 1>;
+ interrupts = <0 3 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 18>;
uart3: serial@01c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
- interrupts = <0 4 1>;
+ interrupts = <0 4 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 19>;
uart4: serial@01c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
- interrupts = <0 17 1>;
+ interrupts = <0 17 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 20>;
uart5: serial@01c29400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29400 0x400>;
- interrupts = <0 18 1>;
+ interrupts = <0 18 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 21>;
uart6: serial@01c29800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29800 0x400>;
- interrupts = <0 19 1>;
+ interrupts = <0 19 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 22>;
uart7: serial@01c29c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29c00 0x400>;
- interrupts = <0 20 1>;
+ interrupts = <0 20 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 23>;
i2c0: i2c@01c2ac00 {
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2ac00 0x400>;
- interrupts = <0 7 1>;
+ interrupts = <0 7 4>;
clocks = <&apb1_gates 0>;
clock-frequency = <100000>;
status = "disabled";
i2c1: i2c@01c2b000 {
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2b000 0x400>;
- interrupts = <0 8 1>;
+ interrupts = <0 8 4>;
clocks = <&apb1_gates 1>;
clock-frequency = <100000>;
status = "disabled";
i2c2: i2c@01c2b400 {
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2b400 0x400>;
- interrupts = <0 9 1>;
+ interrupts = <0 9 4>;
clocks = <&apb1_gates 2>;
clock-frequency = <100000>;
status = "disabled";
i2c3: i2c@01c2b800 {
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2b800 0x400>;
- interrupts = <0 88 1>;
+ interrupts = <0 88 4>;
clocks = <&apb1_gates 3>;
clock-frequency = <100000>;
status = "disabled";
i2c4: i2c@01c2bc00 {
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2bc00 0x400>;
- interrupts = <0 89 1>;
+ interrupts = <0 89 4>;
clocks = <&apb1_gates 15>;
clock-frequency = <100000>;
status = "disabled";
};
+ hstimer@01c60000 {
+ compatible = "allwinner,sun7i-a20-hstimer";
+ reg = <0x01c60000 0x1000>;
+ interrupts = <0 81 1>,
+ <0 82 1>,
+ <0 83 1>,
+ <0 84 1>;
+ clocks = <&ahb_gates 28>;
+ };
+
gic: interrupt-controller@01c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
select CLKSRC_MMIO
bool
+ config SUN5I_HSTIMER
+ select CLKSRC_MMIO
+ bool
+
config VT8500_TIMER
bool
config CLKSRC_EFM32
bool "Clocksource for Energy Micro's EFM32 SoCs" if !ARCH_EFM32
depends on OF && ARM && (ARCH_EFM32 || COMPILE_TEST)
+ select CLKSRC_MMIO
default ARCH_EFM32
help
Support to use the timers of EFM32 SoCs as clock source and clock
config ARM_ARCH_TIMER_EVTSTREAM
bool "Support for ARM architected timer event stream generation"
default y if ARM_ARCH_TIMER
+ depends on ARM_ARCH_TIMER
help
This option enables support for event stream generation based on
the ARM architected timer. It is used for waking up CPUs executing
struct device_node *np;
const struct of_device_id *match;
clocksource_of_init_fn init_func;
+ unsigned clocksources = 0;
for_each_matching_node_and_match(np, __clksrc_of_table, &match) {
if (!of_device_is_available(np))
init_func = match->data;
init_func(np);
- of_node_put(np);
+ clocksources++;
}
+ if (!clocksources)
+ pr_crit("%s: no matching clocksources found\n", __func__);
}
p->irqaction.handler = sh_mtu2_interrupt;
p->irqaction.dev_id = p;
p->irqaction.irq = irq;
- p->irqaction.flags = IRQF_DISABLED | IRQF_TIMER | \
- IRQF_IRQPOLL | IRQF_NOBALANCING;
+ p->irqaction.flags = IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING;
/* get hold of clock */
p->clk = clk_get(&p->pdev->dev, "mtu2_fck");
goto err1;
}
- return sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev),
- cfg->clockevent_rating);
+ ret = clk_prepare(p->clk);
+ if (ret < 0)
+ goto err2;
+
+ ret = sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev),
+ cfg->clockevent_rating);
+ if (ret < 0)
+ goto err3;
+
+ return 0;
+ err3:
+ clk_unprepare(p->clk);
+ err2:
+ clk_put(p->clk);
err1:
iounmap(p->mapbase);
err0:
ret = sh_mtu2_setup(p, pdev);
if (ret) {
kfree(p);
- platform_set_drvdata(pdev, NULL);
pm_runtime_idle(&pdev->dev);
return ret;
}
p->irqaction.handler = sh_tmu_interrupt;
p->irqaction.dev_id = p;
p->irqaction.irq = irq;
- p->irqaction.flags = IRQF_DISABLED | IRQF_TIMER | \
- IRQF_IRQPOLL | IRQF_NOBALANCING;
+ p->irqaction.flags = IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING;
/* get hold of clock */
p->clk = clk_get(&p->pdev->dev, "tmu_fck");
ret = PTR_ERR(p->clk);
goto err1;
}
+
+ ret = clk_prepare(p->clk);
+ if (ret < 0)
+ goto err2;
+
p->cs_enabled = false;
p->enable_count = 0;
- return sh_tmu_register(p, (char *)dev_name(&p->pdev->dev),
- cfg->clockevent_rating,
- cfg->clocksource_rating);
+ ret = sh_tmu_register(p, (char *)dev_name(&p->pdev->dev),
+ cfg->clockevent_rating,
+ cfg->clocksource_rating);
+ if (ret < 0)
+ goto err3;
+
+ return 0;
+
+ err3:
+ clk_unprepare(p->clk);
+ err2:
+ clk_put(p->clk);
err1:
iounmap(p->mapbase);
err0:
ret = sh_tmu_setup(p, pdev);
if (ret) {
kfree(p);
- platform_set_drvdata(pdev, NULL);
pm_runtime_idle(&pdev->dev);
return ret;
}
static struct clock_event_device sun4i_clockevent = {
.name = "sun4i_tick",
- .rating = 300,
+ .rating = 350,
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = sun4i_clkevt_mode,
.set_next_event = sun4i_clkevt_next_event,
.dev_id = &sun4i_clockevent,
};
- static u32 sun4i_timer_sched_read(void)
+ static u64 notrace sun4i_timer_sched_read(void)
{
return ~readl(timer_base + TIMER_CNTVAL_REG(1));
}
TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M),
timer_base + TIMER_CTL_REG(1));
- setup_sched_clock(sun4i_timer_sched_read, 32, rate);
+ sched_clock_register(sun4i_timer_sched_read, 32, rate);
clocksource_mmio_init(timer_base + TIMER_CNTVAL_REG(1), node->name,
- rate, 300, 32, clocksource_mmio_readl_down);
+ rate, 350, 32, clocksource_mmio_readl_down);
ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
writel(TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M),
timer_base + TIMER_CTL_REG(0));
+ /* Make sure timer is stopped before playing with interrupts */
+ sun4i_clkevt_time_stop(0);
+
ret = setup_irq(irq, &sun4i_timer_irq);
if (ret)
pr_warn("failed to setup irq %d\n", irq);
val = readl(timer_base + TIMER_IRQ_EN_REG);
writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG);
- sun4i_clockevent.cpumask = cpumask_of(0);
+ sun4i_clockevent.cpumask = cpu_possible_mask;
+ sun4i_clockevent.irq = irq;
clockevents_config_and_register(&sun4i_clockevent, rate,
TIMER_SYNC_TICKS, 0xffffffff);
static void __iomem *timer_base, *local_base;
static unsigned int timer_clk;
static bool timer25Mhz = true;
+ static u32 enable_mask;
/*
* Number of timer ticks per jiffy.
/*
* Enable the timer.
*/
- local_timer_ctrl_clrset(TIMER0_RELOAD_EN,
- TIMER0_EN | TIMER0_DIV(TIMER_DIVIDER_SHIFT));
+ local_timer_ctrl_clrset(TIMER0_RELOAD_EN, enable_mask);
return 0;
}
/*
* Enable timer.
*/
- local_timer_ctrl_clrset(0, TIMER0_RELOAD_EN |
- TIMER0_EN |
- TIMER0_DIV(TIMER_DIVIDER_SHIFT));
+ local_timer_ctrl_clrset(0, TIMER0_RELOAD_EN | enable_mask);
} else {
/*
* Disable timer.
WARN_ON(!timer_base);
local_base = of_iomap(np, 1);
- if (timer25Mhz)
+ if (timer25Mhz) {
set = TIMER0_25MHZ;
- else
+ enable_mask = TIMER0_EN;
+ } else {
clr = TIMER0_25MHZ;
+ enable_mask = TIMER0_EN | TIMER0_DIV(TIMER_DIVIDER_SHIFT);
+ }
timer_ctrl_clrset(clr, set);
local_timer_ctrl_clrset(clr, set);
ticks_per_jiffy = (timer_clk + HZ / 2) / HZ;
- /*
- * Set scale and timer for sched_clock.
- */
- sched_clock_register(armada_370_xp_read_sched_clock, 32, timer_clk);
-
/*
* Setup free-running clocksource timer (interrupts
* disabled).
writel(0xffffffff, timer_base + TIMER0_VAL_OFF);
writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF);
- timer_ctrl_clrset(0, TIMER0_EN | TIMER0_RELOAD_EN |
- TIMER0_DIV(TIMER_DIVIDER_SHIFT));
+ timer_ctrl_clrset(0, TIMER0_RELOAD_EN | enable_mask);
+ /*
+ * Set scale and timer for sched_clock.
+ */
+ sched_clock_register(armada_370_xp_read_sched_clock, 32, timer_clk);
+
clocksource_mmio_init(timer_base + TIMER0_VAL_OFF,
"armada_370_xp_clocksource",
timer_clk, 300, 32, clocksource_mmio_readl_down);
projects / firefly-linux-kernel-4.4.55.git / commitdiff