NFC: trf7970a: Handle timeout values of zero
authorMark A. Greer <mgreer@animalcreek.com>
Tue, 2 Sep 2014 22:12:44 +0000 (15:12 -0700)
committerSamuel Ortiz <sameo@linux.intel.com>
Sun, 7 Sep 2014 21:13:45 +0000 (23:13 +0200)
The digital layer can try to send a command with a
timeout value of zero (e.g., digital_tg_send_psl_res().
The zero value is used as a flag to indicate that
the driver should not expect a response.  To handle
this, the driver sets an internal timer because it
should still get an interrupt with the TX bit set
in the IRQ Status Register.  When it gets that
interrupt, it returns a return value of '0'.
If it doesn't get the interrupt before timing out,
it returns ETIMEDOUT as usual.

Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
drivers/nfc/trf7970a.c

index 00fb2cee679028d421790b0a82ede9a3078cd8e0..8b109e15687f6217cdb009f6aa56b96063741c8d 100644 (file)
 /* TX length is 3 nibbles long ==> 4KB - 1 bytes max */
 #define TRF7970A_TX_MAX                                (4096 - 1)
 
+#define TRF7970A_WAIT_FOR_TX_IRQ               20
 #define TRF7970A_WAIT_FOR_RX_DATA_TIMEOUT      20
 #define TRF7970A_WAIT_FOR_FIFO_DRAIN_TIMEOUT   20
 #define TRF7970A_WAIT_TO_ISSUE_ISO15693_EOF    40
@@ -555,7 +556,11 @@ static int trf7970a_transmit(struct trf7970a *trf, struct sk_buff *skb,
                        timeout = TRF7970A_WAIT_TO_ISSUE_ISO15693_EOF;
                } else {
                        trf->state = TRF7970A_ST_WAIT_FOR_RX_DATA;
-                       timeout = trf->timeout;
+
+                       if (!trf->timeout)
+                               timeout = TRF7970A_WAIT_FOR_TX_IRQ;
+                       else
+                               timeout = trf->timeout;
                }
        }
 
@@ -754,6 +759,14 @@ static irqreturn_t trf7970a_irq(int irq, void *dev_id)
                                trf7970a_cmd(trf, TRF7970A_CMD_FIFO_RESET);
                } else if (status == TRF7970A_IRQ_STATUS_TX) {
                        trf7970a_cmd(trf, TRF7970A_CMD_FIFO_RESET);
+
+                       if (!trf->timeout) {
+                               trf->ignore_timeout = !cancel_delayed_work(
+                                               &trf->timeout_work);
+                               trf->rx_skb = ERR_PTR(0);
+                               trf7970a_send_upstream(trf);
+                               break;
+                       }
                } else {
                        trf7970a_send_err_upstream(trf, -EIO);
                }
@@ -1253,12 +1266,14 @@ static int trf7970a_in_send_cmd(struct nfc_digital_dev *ddev,
                goto out_err;
        }
 
-       trf->rx_skb = nfc_alloc_recv_skb(TRF7970A_RX_SKB_ALLOC_SIZE,
-                       GFP_KERNEL);
-       if (!trf->rx_skb) {
-               dev_dbg(trf->dev, "Can't alloc rx_skb\n");
-               ret = -ENOMEM;
-               goto out_err;
+       if (timeout) {
+               trf->rx_skb = nfc_alloc_recv_skb(TRF7970A_RX_SKB_ALLOC_SIZE,
+                               GFP_KERNEL);
+               if (!trf->rx_skb) {
+                       dev_dbg(trf->dev, "Can't alloc rx_skb\n");
+                       ret = -ENOMEM;
+                       goto out_err;
+               }
        }
 
        if (trf->state == TRF7970A_ST_IDLE_RX_BLOCKED) {