pinctrl: nomadik: force-convert to generic config bindings
authorLinus Walleij <linus.walleij@linaro.org>
Tue, 30 Sep 2014 10:16:25 +0000 (12:16 +0200)
committerLinus Walleij <linus.walleij@linaro.org>
Mon, 20 Oct 2014 07:08:26 +0000 (09:08 +0200)
This converts the Nomadik pin controller and all associated device
trees to use the standard, generic config bindings for pin controllers.
There are no such device trees deployed in the wild so this is
safe to do to set a good example.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi
arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
arch/arm/boot/dts/ste-href-stuib.dtsi
arch/arm/boot/dts/ste-href-tvk1281618.dtsi
arch/arm/boot/dts/ste-hrefprev60.dtsi
arch/arm/boot/dts/ste-hrefv60plus.dtsi
arch/arm/boot/dts/ste-nomadik-s8815.dts
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
arch/arm/boot/dts/ste-snowball.dts
drivers/pinctrl/nomadik/pinctrl-nomadik.c

index 08a7365cb9299c87f520aaf28ea4d5a47bc9d030..52dba2e39c71adc324eacc91058beca28894b9b0 100644 (file)
 
                                uart0_default_mode: uart0_default {
                                        default_cfg1 {
-                                               ste,pins = "GPIO0", "GPIO2";
+                                               pins = "GPIO0", "GPIO2";
                                                ste,config = <&in_pu>;
                                        };
 
                                        default_cfg2 {
-                                               ste,pins = "GPIO1", "GPIO3";
+                                               pins = "GPIO1", "GPIO3";
                                                ste,config = <&out_hi>;
                                        };
                                };
 
                                uart0_sleep_mode: uart0_sleep {
                                        sleep_cfg1 {
-                                               ste,pins = "GPIO0", "GPIO2";
+                                               pins = "GPIO0", "GPIO2";
                                                ste,config = <&slpm_in_pu>;
                                        };
 
                                        sleep_cfg2 {
-                                               ste,pins = "GPIO1", "GPIO3";
+                                               pins = "GPIO1", "GPIO3";
                                                ste,config = <&slpm_out_hi>;
                                        };
                                };
                                        };
 
                                        default_cfg1 {
-                                               ste,pins = "GPIO120";
+                                               pins = "GPIO120";
                                                ste,config = <&in_pu>;
                                        };
 
                                        default_cfg2 {
-                                               ste,pins = "GPIO121";
+                                               pins = "GPIO121";
                                                ste,config = <&out_hi>;
                                        };
                                };
 
                                uart2_sleep_mode: uart2_sleep {
                                        sleep_cfg1 {
-                                               ste,pins = "GPIO120";
+                                               pins = "GPIO120";
                                                ste,config = <&slpm_in_pu>;
                                        };
 
                                        sleep_cfg2 {
-                                               ste,pins = "GPIO121";
+                                               pins = "GPIO121";
                                                ste,config = <&slpm_out_hi>;
                                        };
                                };
 
                                i2c0_default_mode: i2c_default {
                                        default_cfg1 {
-                                               ste,pins = "GPIO147", "GPIO148";
+                                               pins = "GPIO147", "GPIO148";
                                                ste,config = <&in_pu>;
                                        };
                                };
 
                                i2c0_sleep_mode: i2c_sleep {
                                        sleep_cfg1 {
-                                               ste,pins = "GPIO147", "GPIO148";
+                                               pins = "GPIO147", "GPIO148";
                                                ste,config = <&slpm_in_pu>;
                                        };
                                };
 
                                i2c1_default_mode: i2c_default {
                                        default_cfg1 {
-                                               ste,pins = "GPIO16", "GPIO17";
+                                               pins = "GPIO16", "GPIO17";
                                                ste,config = <&in_pu>;
                                        };
                                };
 
                                i2c1_sleep_mode: i2c_sleep {
                                        sleep_cfg1 {
-                                               ste,pins = "GPIO16", "GPIO17";
+                                               pins = "GPIO16", "GPIO17";
                                                ste,config = <&slpm_in_pu>;
                                        };
                                };
 
                                i2c2_default_mode: i2c_default {
                                        default_cfg1 {
-                                               ste,pins = "GPIO10", "GPIO11";
+                                               pins = "GPIO10", "GPIO11";
                                                ste,config = <&in_pu>;
                                        };
                                };
 
                                i2c2_sleep_mode: i2c_sleep {
                                        sleep_cfg1 {
-                                               ste,pins = "GPIO11", "GPIO11";
+                                               pins = "GPIO11", "GPIO11";
                                                ste,config = <&slpm_in_pu>;
                                        };
                                };
 
                                i2c4_default_mode: i2c_default {
                                        default_cfg1 {
-                                               ste,pins = "GPIO122", "GPIO123";
+                                               pins = "GPIO122", "GPIO123";
                                                ste,config = <&in_pu>;
                                        };
                                };
 
                                i2c4_sleep_mode: i2c_sleep {
                                        sleep_cfg1 {
-                                               ste,pins = "GPIO122", "GPIO123";
+                                               pins = "GPIO122", "GPIO123";
                                                ste,config = <&slpm_in_pu>;
                                        };
                                };
 
                                i2c5_default_mode: i2c_default {
                                        default_cfg1 {
-                                               ste,pins = "GPIO118", "GPIO119";
+                                               pins = "GPIO118", "GPIO119";
                                                ste,config = <&in_pu>;
                                        };
                                };
 
                                i2c5_sleep_mode: i2c_sleep {
                                        sleep_cfg1 {
-                                               ste,pins = "GPIO118", "GPIO119";
+                                               pins = "GPIO118", "GPIO119";
                                                ste,config = <&slpm_in_pu>;
                                        };
                                };
index 61aa87138927ba218cbf4dd63d5ae13365c06c80..5c5cea232743d111f154cd0faa0517b44f6a70ab 100644 (file)
                                                groups = "u0_a_1";
                                        };
                                        default_cfg1 {
-                                               ste,pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
+                                               pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
                                                ste,config = <&in_pu>;
                                        };
 
                                        default_cfg2 {
-                                               ste,pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */
+                                               pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */
                                                ste,config = <&out_hi>;
                                        };
                                };
 
                                uart0_sleep_mode: uart0_sleep {
                                        sleep_cfg1 {
-                                               ste,pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
+                                               pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
                                                ste,config = <&slpm_in_wkup_pdis>;
                                        };
 
                                        sleep_cfg2 {
-                                               ste,pins = "GPIO1_AJ3"; /* RTS */
+                                               pins = "GPIO1_AJ3"; /* RTS */
                                                ste,config = <&slpm_out_hi_wkup_pdis>;
                                        };
 
                                        sleep_cfg3 {
-                                               ste,pins = "GPIO3_AH3"; /* TXD */
+                                               pins = "GPIO3_AH3"; /* TXD */
                                                ste,config = <&slpm_out_wkup_pdis>;
                                        };
                                };
                                                groups = "u1rxtx_a_1";
                                        };
                                        default_cfg1 {
-                                               ste,pins = "GPIO4_AH6"; /* RXD */
+                                               pins = "GPIO4_AH6"; /* RXD */
                                                ste,config = <&in_pu>;
                                        };
 
                                        default_cfg2 {
-                                               ste,pins = "GPIO5_AG6"; /* TXD */
+                                               pins = "GPIO5_AG6"; /* TXD */
                                                ste,config = <&out_hi>;
                                        };
                                };
 
                                uart1_sleep_mode: uart1_sleep {
                                        sleep_cfg1 {
-                                               ste,pins = "GPIO4_AH6"; /* RXD */
+                                               pins = "GPIO4_AH6"; /* RXD */
                                                ste,config = <&slpm_in_wkup_pdis>;
                                        };
 
                                        sleep_cfg2 {
-                                               ste,pins = "GPIO5_AG6"; /* TXD */
+                                               pins = "GPIO5_AG6"; /* TXD */
                                                ste,config = <&slpm_out_wkup_pdis>;
                                        };
                                };
                                                groups = "u2rxtx_c_1";
                                        };
                                        default_cfg1 {
-                                               ste,pins = "GPIO29_W2"; /* RXD */
+                                               pins = "GPIO29_W2"; /* RXD */
                                                ste,config = <&in_pu>;
                                        };
 
                                        default_cfg2 {
-                                               ste,pins = "GPIO30_W3"; /* TXD */
+                                               pins = "GPIO30_W3"; /* TXD */
                                                ste,config = <&out_hi>;
                                        };
                                };
 
                                uart2_sleep_mode: uart2_sleep {
                                        sleep_cfg1 {
-                                               ste,pins = "GPIO29_W2"; /* RXD */
+                                               pins = "GPIO29_W2"; /* RXD */
                                                ste,config = <&in_wkup_pdis>;
                                        };
 
                                        sleep_cfg2 {
-                                               ste,pins = "GPIO30_W3"; /* TXD */
+                                               pins = "GPIO30_W3"; /* TXD */
                                                ste,config = <&out_wkup_pdis>;
                                        };
                                };
                                                groups = "i2c0_a_1";
                                        };
                                        default_cfg1 {
-                                               ste,pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
+                                               pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
                                                ste,config = <&in_pu>;
                                        };
                                };
 
                                i2c0_sleep_mode: i2c_sleep {
                                        sleep_cfg1 {
-                                               ste,pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
+                                               pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
                                                ste,config = <&slpm_in_wkup_pdis>;
                                        };
                                };
                                                groups = "i2c1_b_2";
                                        };
                                        default_cfg1 {
-                                               ste,pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
+                                               pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
                                                ste,config = <&in_pu>;
                                        };
                                };
 
                                i2c1_sleep_mode: i2c_sleep {
                                        sleep_cfg1 {
-                                               ste,pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
+                                               pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
                                                ste,config = <&slpm_in_wkup_pdis>;
                                        };
                                };
                                                groups = "i2c2_b_2";
                                        };
                                        default_cfg1 {
-                                               ste,pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
+                                               pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
                                                ste,config = <&in_pu>;
                                        };
                                };
 
                                i2c2_sleep_mode: i2c_sleep {
                                        sleep_cfg1 {
-                                               ste,pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
+                                               pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
                                                ste,config = <&slpm_in_wkup_pdis>;
                                        };
                                };
                                                groups = "i2c3_c_2";
                                        };
                                        default_cfg1 {
-                                               ste,pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
+                                               pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
                                                ste,config = <&in_pu>;
                                        };
                                };
 
                                i2c3_sleep_mode: i2c_sleep {
                                        sleep_cfg1 {
-                                               ste,pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
+                                               pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
                                                ste,config = <&slpm_in_wkup_pdis>;
                                        };
                                };
                                                groups = "i2c4_b_1";
                                        };
                                        default_cfg1 {
-                                               ste,pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
+                                               pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
                                                ste,config = <&in_pu>;
                                        };
                                };
 
                                i2c4_sleep_mode: i2c_sleep {
                                        sleep_cfg1 {
-                                               ste,pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
+                                               pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
                                                ste,config = <&slpm_in_wkup_pdis>;
                                        };
                                };
                                                groups = "spi2_oc1_2";
                                        };
                                        default_cfg1 {
-                                               ste,pins = "GPIO216_AG12"; /* FRM */
+                                               pins = "GPIO216_AG12"; /* FRM */
                                                ste,config = <&gpio_out_hi>;
                                        };
                                        default_cfg2 {
-                                               ste,pins = "GPIO218_AH11"; /* RXD */
+                                               pins = "GPIO218_AH11"; /* RXD */
                                                ste,config = <&in_pd>;
                                        };
                                        default_cfg3 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO215_AH13", /* TXD */
                                                "GPIO217_AH12"; /* CLK */
                                                ste,config = <&out_lo>;
                                         * as we do not state any muxing.
                                         */
                                        idle_cfg1 {
-                                               ste,pins = "GPIO218_AH11"; /* RXD */
+                                               pins = "GPIO218_AH11"; /* RXD */
                                                ste,config = <&slpm_in_pdis>;
                                        };
                                        idle_cfg2 {
-                                               ste,pins = "GPIO215_AH13"; /* TXD */
+                                               pins = "GPIO215_AH13"; /* TXD */
                                                ste,config = <&slpm_out_lo_pdis>;
                                        };
                                        idle_cfg3 {
-                                               ste,pins = "GPIO217_AH12"; /* CLK */
+                                               pins = "GPIO217_AH12"; /* CLK */
                                                ste,config = <&slpm_pdis>;
                                        };
                                };
 
                                spi2_sleep_mode: spi_sleep {
                                        sleep_cfg1 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO216_AG12", /* FRM */
                                                "GPIO218_AH11"; /* RXD */
                                                ste,config = <&slpm_in_wkup_pdis>;
                                        };
                                        sleep_cfg2 {
-                                               ste,pins = "GPIO215_AH13"; /* TXD */
+                                               pins = "GPIO215_AH13"; /* TXD */
                                                ste,config = <&slpm_out_lo_wkup_pdis>;
                                        };
                                        sleep_cfg3 {
-                                               ste,pins = "GPIO217_AH12"; /* CLK */
+                                               pins = "GPIO217_AH12"; /* CLK */
                                                ste,config = <&slpm_wkup_pdis>;
                                        };
                                };
                                                groups = "mc0_a_1";
                                        };
                                        default_cfg1 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO18_AC2", /* CMDDIR */
                                                "GPIO19_AC1", /* DAT0DIR */
                                                "GPIO20_AB4"; /* DAT2DIR */
                                                ste,config = <&out_hi>;
                                        };
                                        default_cfg2 {
-                                               ste,pins = "GPIO22_AA3"; /* FBCLK */
+                                               pins = "GPIO22_AA3"; /* FBCLK */
                                                ste,config = <&in_nopull>;
                                        };
                                        default_cfg3 {
-                                               ste,pins = "GPIO23_AA4"; /* CLK */
+                                               pins = "GPIO23_AA4"; /* CLK */
                                                ste,config = <&out_lo>;
                                        };
                                        default_cfg4 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO24_AB2", /* CMD */
                                                "GPIO25_Y4", /* DAT0 */
                                                "GPIO26_Y2", /* DAT1 */
 
                                sdi0_sleep_mode: sdi0_sleep {
                                        sleep_cfg1 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO18_AC2", /* CMDDIR */
                                                "GPIO19_AC1", /* DAT0DIR */
                                                "GPIO20_AB4"; /* DAT2DIR */
                                                ste,config = <&slpm_out_hi_wkup_pdis>;
                                        };
                                        sleep_cfg2 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO22_AA3", /* FBCLK */
                                                "GPIO24_AB2", /* CMD */
                                                "GPIO25_Y4", /* DAT0 */
                                                ste,config = <&slpm_in_wkup_pdis>;
                                        };
                                        sleep_cfg3 {
-                                               ste,pins = "GPIO23_AA4"; /* CLK */
+                                               pins = "GPIO23_AA4"; /* CLK */
                                                ste,config = <&slpm_out_lo_wkup_pdis>;
                                        };
                                };
                                                groups = "mc1_a_1";
                                        };
                                        default_cfg1 {
-                                               ste,pins = "GPIO208_AH16"; /* CLK */
+                                               pins = "GPIO208_AH16"; /* CLK */
                                                ste,config = <&out_lo>;
                                        };
                                        default_cfg2 {
-                                               ste,pins = "GPIO209_AG15"; /* FBCLK */
+                                               pins = "GPIO209_AG15"; /* FBCLK */
                                                ste,config = <&in_nopull>;
                                        };
                                        default_cfg3 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO210_AJ15", /* CMD */
                                                "GPIO211_AG14", /* DAT0 */
                                                "GPIO212_AF13", /* DAT1 */
 
                                sdi1_sleep_mode: sdi1_sleep {
                                        sleep_cfg1 {
-                                               ste,pins = "GPIO208_AH16"; /* CLK */
+                                               pins = "GPIO208_AH16"; /* CLK */
                                                ste,config = <&slpm_out_lo_wkup_pdis>;
                                        };
                                        sleep_cfg2 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO209_AG15", /* FBCLK */
                                                "GPIO210_AJ15", /* CMD */
                                                "GPIO211_AG14", /* DAT0 */
                                                groups = "mc2_a_1";
                                        };
                                        default_cfg1 {
-                                               ste,pins = "GPIO128_A5"; /* CLK */
+                                               pins = "GPIO128_A5"; /* CLK */
                                                ste,config = <&out_lo>;
                                        };
                                        default_cfg2 {
-                                               ste,pins = "GPIO130_C8"; /* FBCLK */
+                                               pins = "GPIO130_C8"; /* FBCLK */
                                                ste,config = <&in_nopull>;
                                        };
                                        default_cfg3 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO129_B4", /* CMD */
                                                "GPIO131_A12", /* DAT0 */
                                                "GPIO132_C10", /* DAT1 */
 
                                sdi2_sleep_mode: sdi2_sleep {
                                        sleep_cfg1 {
-                                               ste,pins = "GPIO128_A5"; /* CLK */
+                                               pins = "GPIO128_A5"; /* CLK */
                                                ste,config = <&out_lo_wkup_pdis>;
                                        };
                                        sleep_cfg2 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO130_C8", /* FBCLK */
                                                "GPIO129_B4"; /* CMD */
                                                ste,config = <&in_wkup_pdis_en>;
                                        };
                                        sleep_cfg3 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO131_A12", /* DAT0 */
                                                "GPIO132_C10", /* DAT1 */
                                                "GPIO133_B10", /* DAT2 */
                                                groups = "mc4_a_1";
                                        };
                                        default_cfg1 {
-                                               ste,pins = "GPIO203_AE23"; /* CLK */
+                                               pins = "GPIO203_AE23"; /* CLK */
                                                ste,config = <&out_lo>;
                                        };
                                        default_cfg2 {
-                                               ste,pins = "GPIO202_AF25"; /* FBCLK */
+                                               pins = "GPIO202_AF25"; /* FBCLK */
                                                ste,config = <&in_nopull>;
                                        };
                                        default_cfg3 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO201_AF24", /* CMD */
                                                "GPIO200_AH26", /* DAT0 */
                                                "GPIO199_AH23", /* DAT1 */
 
                                sdi4_sleep_mode: sdi4_sleep {
                                        sleep_cfg1 {
-                                               ste,pins = "GPIO203_AE23"; /* CLK */
+                                               pins = "GPIO203_AE23"; /* CLK */
                                                ste,config = <&out_lo_wkup_pdis>;
                                        };
                                        sleep_cfg2 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO202_AF25", /* FBCLK */
                                                "GPIO201_AF24", /* CMD */
                                                "GPIO200_AH26", /* DAT0 */
                                                groups = "msp0txrx_a_1", "msp0tfstck_a_1";
                                        };
                                        default_msp0_cfg {
-                                               ste,pins =
+                                               pins =
                                                "GPIO12_AC4", /* TXD */
                                                "GPIO15_AC3", /* RXD */
                                                "GPIO13_AF3", /* TFS */
                                                groups = "msp1txrx_a_1", "msp1_a_1";
                                        };
                                        default_cfg1 {
-                                               ste,pins = "GPIO33_AF2";
+                                               pins = "GPIO33_AF2";
                                                ste,config = <&out_lo>;
                                        };
                                        default_cfg2 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO34_AE1",
                                                "GPIO35_AE2",
                                                "GPIO36_AG2";
                                                groups = "msp2_a_1";
                                        };
                                        default_cfg1 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO193_AH27", /* TXD */
                                                "GPIO194_AF27", /* TCK */
                                                "GPIO195_AG28"; /* TFS */
                                                ste,config = <&in_pd>;
                                        };
                                        default_cfg2 {
-                                               ste,pins = "GPIO196_AG26"; /* RXD */
+                                               pins = "GPIO196_AG26"; /* RXD */
                                                ste,config = <&out_lo>;
                                        };
                                };
                                                groups = "usb_a_1";
                                        };
                                        default_cfg1 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO256_AF28", /* NXT */
                                                "GPIO258_AD29", /* XCLK */
                                                "GPIO259_AC29", /* DIR */
                                                ste,config = <&in_nopull>;
                                        };
                                        default_cfg2 {
-                                               ste,pins = "GPIO257_AE29"; /* STP */
+                                               pins = "GPIO257_AE29"; /* STP */
                                                ste,config = <&out_hi>;
                                        };
                                };
 
                                musb_sleep_mode: musb_sleep {
                                        sleep_cfg1 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO256_AF28", /* NXT */
                                                "GPIO258_AD29", /* XCLK */
                                                "GPIO259_AC29"; /* DIR */
                                                ste,config = <&slpm_wkup_pdis_en>;
                                        };
                                        sleep_cfg2 {
-                                               ste,pins = "GPIO257_AE29"; /* STP */
+                                               pins = "GPIO257_AE29"; /* STP */
                                                ste,config = <&slpm_out_hi_wkup_pdis>;
                                        };
                                        sleep_cfg3 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO260_AD28", /* DAT7 */
                                                "GPIO261_AD26", /* DAT6 */
                                                "GPIO262_AE26", /* DAT5 */
                                                "lcdvsi1_a_1"; /* VSI1 for HDMI */
                                        };
                                        default_cfg1 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO68_E1", /* VSI0 */
                                                "GPIO69_E2"; /* VSI1 */
                                                ste,config = <&in_pu>;
                                };
                                lcd_sleep_mode: lcd_sleep {
                                        sleep_cfg1 {
-                                               ste,pins = "GPIO69_E2"; /* VSI1 */
+                                               pins = "GPIO69_E2"; /* VSI1 */
                                                ste,config = <&slpm_in_wkup_pdis>;
                                        };
                                };
                                                groups = "kp_a_2";
                                        };
                                        default_cfg1 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO153_B17", /* I7 */
                                                "GPIO154_C16", /* I6 */
                                                "GPIO155_C19", /* I5 */
                                                ste,config = <&in_pd>;
                                        };
                                        default_cfg2 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO157_A18", /* O7 */
                                                "GPIO158_C18", /* O6 */
                                                "GPIO159_B19", /* O5 */
                                };
                                ske_kpa2_sleep_mode: ske_kpa2_sleep {
                                        sleep_cfg1 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO153_B17", /* I7 */
                                                "GPIO154_C16", /* I6 */
                                                "GPIO155_C19", /* I5 */
                                                ste,config = <&slpm_in_pu_wkup_pdis_en>;
                                        };
                                        sleep_cfg2 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO157_A18", /* O7 */
                                                "GPIO158_C18", /* O6 */
                                                "GPIO159_B19", /* O5 */
                                                groups = "kp_a_1", "kp_oc1_1";
                                        };
                                        default_cfg1 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO91_B6", /* KP_O0 */
                                                "GPIO90_A3", /* KP_O1 */
                                                "GPIO87_B3", /* KP_O2 */
                                                ste,config = <&out_lo>;
                                        };
                                        default_cfg2 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO93_B7", /* KP_I0 */
                                                "GPIO92_D6", /* KP_I1 */
                                                "GPIO89_E6", /* KP_I2 */
                                         * These are plain GPIO pins used by WLAN
                                         */
                                        default_cfg1 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO226_AF8", /* WLAN_PMU_EN */
                                                "GPIO85_D5"; /* WLAN_ENA */
                                                ste,config = <&gpio_out_lo>;
                                        };
                                        default_cfg2 {
-                                               ste,pins = "GPIO4_AH6"; /* WLAN_IRQ on UART1 */
+                                               pins = "GPIO4_AH6"; /* WLAN_IRQ on UART1 */
                                                ste,config = <&gpio_in_pu>;
                                        };
                                };
index 84d7c5d883f26bb5c8a181a6b9bc32d42ac23cc3..7d4f8184c522b09e405d8168ac206d39c2254938 100644 (file)
                        prox {
                                prox_stuib_mode: prox_stuib {
                                        stuib_cfg {
-                                               ste,pins = "GPIO217_AH12";
+                                               pins = "GPIO217_AH12";
                                                ste,config = <&gpio_in_pu>;
                                        };
                                };
                        hall {
                                hall_stuib_mode: stuib_tvk {
                                        stuib_cfg {
-                                               ste,pins = "GPIO145_C13";
+                                               pins = "GPIO145_C13";
                                                ste,config = <&gpio_in_pu>;
                                        };
                                };
index 18b65d1b14f2e9197d7ccdfb31d63f84ab4fe75b..062c6aae3afa8406580976ddd95869a321d8d69c 100644 (file)
                        tc35893 {
                                tc35893_tvk_mode: tc35893_tvk {
                                        tvk_cfg {
-                                               ste,pins = "GPIO218_AH11";
+                                               pins = "GPIO218_AH11";
                                                ste,config = <&gpio_in_pu>;
                                        };
                                };
                        prox {
                                prox_tvk_mode: prox_tvk {
                                        tvk_cfg {
-                                               ste,pins = "GPIO217_AH12";
+                                               pins = "GPIO217_AH12";
                                                ste,config = <&gpio_in_pu>;
                                        };
                                };
                        hall {
                                hall_tvk_mode: hall_tvk {
                                        tvk_cfg {
-                                               ste,pins = "GPIO145_C13";
+                                               pins = "GPIO145_C13";
                                                ste,config = <&gpio_in_pu>;
                                        };
                                };
                                accel_tvk_mode: accel_tvk {
                                        /* Accelerometer interrupt lines 1 & 2 */
                                        tvk_cfg {
-                                               ste,pins = "GPIO82_C1", "GPIO83_D3";
+                                               pins = "GPIO82_C1", "GPIO83_D3";
                                                ste,config = <&gpio_in_pu>;
                                        };
                                };
                                magneto_tvk_mode: magneto_tvk {
                                        /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
                                        tvk_cfg1 {
-                                               ste,pins = "GPIO31_V3";
+                                               pins = "GPIO31_V3";
                                                ste,config = <&gpio_in_pu>;
                                        };
                                        tvk_cfg2 {
-                                               ste,pins = "GPIO32_V2";
+                                               pins = "GPIO32_V2";
                                                ste,config = <&gpio_in_pd>;
                                        };
                                };
index 5d8b7f8ced1b62caa84fbd50186725ca49536948..7f3975b58d16607d5cf79f10eca8df1dc75ab9d5 100644 (file)
@@ -83,7 +83,7 @@
                                                groups = "ssp0_a_1";
                                        };
                                        hrefprev60_cfg1 {
-                                               ste,pins = "GPIO145_C13"; /* RXD */
+                                               pins = "GPIO145_C13"; /* RXD */
                                                ste,config = <&in_pd>;
                                        };
 
@@ -97,7 +97,7 @@
                                                groups = "mc0dat31dir_a_1";
                                        };
                                        hrefprev60_cfg1 {
-                                               ste,pins = "GPIO21_AB3"; /* DAT31DIR */
+                                               pins = "GPIO21_AB3"; /* DAT31DIR */
                                                ste,config = <&out_hi>;
                                        };
 
                        tc35892 {
                                tc35892_hrefprev60_mode: tc35892_hrefprev60 {
                                        hrefprev60_cfg {
-                                               ste,pins = "GPIO217_AH12";
+                                               pins = "GPIO217_AH12";
                                                ste,config = <&gpio_in_pu>;
                                        };
                                };
                                                groups = "ipgpio0_c_1", "ipgpio1_c_1";
                                        };
                                        hrefprev60_cfg1 {
-                                               ste,pins = "GPIO6_AF6", "GPIO7_AG5";
+                                               pins = "GPIO6_AF6", "GPIO7_AG5";
                                                ste,config = <&in_pu>;
                                        };
                                 };
index 2b4104ef07de3ae9eaea2e83e631040441671cc2..a4bc9e77d640d3762b01952ca23ae07d558cab36 100644 (file)
@@ -49,7 +49,7 @@
                                /* SD card detect GPIO pin, extend default state */
                                sdi0_default_mode: sdi0_default {
                                        default_hrefv60_cfg1 {
-                                               ste,pins = "GPIO95_E8";
+                                               pins = "GPIO95_E8";
                                                ste,config = <&gpio_in_pu>;
                                        };
                                };
                                                groups = "ipgpio0_c_1", "ipgpio1_c_1", "ipgpio4_c_1";
                                        };
                                        hrefv60_cfg1 {
-                                               ste,pins = "GPIO6_AF6", "GPIO7_AG5";
+                                               pins = "GPIO6_AF6", "GPIO7_AG5";
                                                ste,config = <&in_pu>;
                                        };
                                        hrefv60_cfg2 {
-                                               ste,pins = "GPIO21_AB3";
+                                               pins = "GPIO21_AB3";
                                                ste,config = <&gpio_out_lo>;
                                        };
                                        hrefv60_cfg3 {
-                                               ste,pins = "GPIO64_F3";
+                                               pins = "GPIO64_F3";
                                                ste,config = <&out_lo>;
                                        };
                                };
@@ -89,7 +89,7 @@
                                 */
                                etm_hrefv60_mode: etm_hrefv60 {
                                        hrefv60_cfg1 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO70_G5",
                                                "GPIO71_G4",
                                                "GPIO72_H4",
                                nahj_hrefv60_mode: nahj_hrefv60 {
                                        /* NAHJ CTRL on GPIO76 to low, CTRL_INV on GPIO216 to high */
                                        hrefv60_cfg1 {
-                                               ste,pins = "GPIO76_J2";
+                                               pins = "GPIO76_J2";
                                                ste,config = <&gpio_out_lo>;
                                        };
                                        hrefv60_cfg2 {
-                                               ste,pins = "GPIO216_AG12";
+                                               pins = "GPIO216_AG12";
                                                ste,config = <&gpio_out_hi>;
                                        };
                                 };
                                nfc_hrefv60_mode: nfc_hrefv60 {
                                        /* NFC ENA and RESET to low, pulldown IRQ line */
                                        hrefv60_cfg1 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO77_H1", /* NFC_ENA */
                                                "GPIO142_C11"; /* NFC_RESET */
                                                ste,config = <&gpio_out_lo>;
                                        };
                                        hrefv60_cfg2 {
-                                               ste,pins = "GPIO144_B13"; /* NFC_IRQ */
+                                               pins = "GPIO144_B13"; /* NFC_IRQ */
                                                ste,config = <&gpio_in_pd>;
                                        };
                                 };
                        force {
                                force_hrefv60_mode: force_hrefv60 {
                                        hrefv60_cfg1 {
-                                               ste,pins = "GPIO91_B6"; /* FORCE_SENSING_INT */
+                                               pins = "GPIO91_B6"; /* FORCE_SENSING_INT */
                                                ste,config = <&gpio_in_pu>;
                                        };
                                        hrefv60_cfg2 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO92_D6", /* FORCE_SENSING_RST */
                                                "GPIO97_D9"; /* FORCE_SENSING_WU */
                                                ste,config = <&gpio_out_lo>;
                        dipro {
                                dipro_hrefv60_mode: dipro_hrefv60 {
                                        hrefv60_cfg1 {
-                                               ste,pins = "GPIO139_C9"; /* DIPRO_INT */
+                                               pins = "GPIO139_C9"; /* DIPRO_INT */
                                                ste,config = <&gpio_in_pu>;
                                        };
                                 };
                                vaudio_hf_hrefv60_mode: vaudio_hf_hrefv60 {
                                        /* Audio Amplifier HF enable GPIO */
                                        hrefv60_cfg1 {
-                                               ste,pins = "GPIO149_B14"; /* VAUDIO_HF_EN, enable MAX8968 */
+                                               pins = "GPIO149_B14"; /* VAUDIO_HF_EN, enable MAX8968 */
                                                ste,config = <&gpio_out_hi>;
                                        };
                                 };
                                         * pull low to reset state
                                         */
                                        hrefv60_cfg1 {
-                                               ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */
+                                               pins = "GPIO171_D23"; /* GBF_ENA_RESET */
                                                ste,config = <&gpio_out_lo>;
                                        };
                                 };
                                hdtv_hrefv60_mode: hdtv_hrefv60 {
                                        /* MSP : HDTV INTERFACE GPIO line */
                                        hrefv60_cfg1 {
-                                               ste,pins = "GPIO192_AJ27";
+                                               pins = "GPIO192_AJ27";
                                                ste,config = <&gpio_in_pd>;
                                        };
                                 };
                                         * reset signals low.
                                         */
                                        hrefv60_cfg1 {
-                                               ste,pins = "GPIO143_D12", "GPIO146_D13";
+                                               pins = "GPIO143_D12", "GPIO146_D13";
                                                ste,config = <&gpio_out_lo>;
                                        };
                                        hrefv60_cfg2 {
-                                               ste,pins = "GPIO67_G2";
+                                               pins = "GPIO67_G2";
                                                ste,config = <&gpio_in_pu>;
                                        };
                                };
                                         * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset)
                                         */
                                        hrefv60_cfg1 {
-                                               ste,pins ="GPIO65_F1";
+                                               pins ="GPIO65_F1";
                                                ste,config = <&gpio_out_hi>;
                                        };
                                        hrefv60_cfg2 {
-                                               ste,pins ="GPIO66_G3";
+                                               pins ="GPIO66_G3";
                                                ste,config = <&gpio_out_lo>;
                                        };
                                };
index 90d8b6c7a20506ee81e9e5258e0d4522d8cfeba8..cc81ae7450a99e89620a4b507a4508510e3e4efe 100644 (file)
                        cd_default_mode: cd_default {
                                cd_default_cfg1 {
                                        /* CD input GPIO */
-                                       ste,pins = "GPIO111_H21";
+                                       pins = "GPIO111_H21";
                                        ste,input = <0>;
                                };
                                cd_default_cfg2 {
                                        /* CD GPIO biasing */
-                                       ste,pins = "GPIO112_J21";
+                                       pins = "GPIO112_J21";
                                        ste,output = <0>;
                                };
                        };
@@ -50,7 +50,7 @@
                user-led {
                        user_led_default_mode: user_led_default {
                                user_led_default_cfg {
-                                       ste,pins = "GPIO2_C5";
+                                       pins = "GPIO2_C5";
                                        ste,output = <1>;
                                };
                        };
@@ -58,7 +58,7 @@
                user-button {
                        user_button_default_mode: user_button_default {
                                user_button_default_cfg {
-                                       ste,pins = "GPIO3_A4";
+                                       pins = "GPIO3_A4";
                                        ste,input = <0>;
                                };
                        };
index 7cedb5aba9a9463329351d0f5f3865c496d61cd1..c8b4a93180f8c6a24e5c89065bccf8bdefef3637 100644 (file)
                        mmcsd_default_mode: mmcsd_default {
                                mmcsd_default_cfg1 {
                                        /* MCCLK */
-                                       ste,pins = "GPIO8_B10";
+                                       pins = "GPIO8_B10";
                                        ste,output = <0>;
                                };
                                mmcsd_default_cfg2 {
                                        /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR */
-                                       ste,pins = "GPIO10_C11", "GPIO15_A12",
+                                       pins = "GPIO10_C11", "GPIO15_A12",
                                        "GPIO16_C13";
                                        ste,output = <1>;
                                };
                                mmcsd_default_cfg3 {
                                        /* MCCMD, MCDAT3-0, MCMSFBCLK */
-                                       ste,pins = "GPIO9_A10", "GPIO11_B11",
+                                       pins = "GPIO9_A10", "GPIO11_B11",
                                        "GPIO12_A11", "GPIO13_C12",
                                        "GPIO14_B12", "GPIO24_C15";
                                        ste,input = <1>;
                        };
                        i2c0_default_mode: i2c0_default {
                                i2c0_default_cfg {
-                                       ste,pins = "GPIO62_D3", "GPIO63_D2";
+                                       pins = "GPIO62_D3", "GPIO63_D2";
                                        ste,input = <0>;
                                };
                        };
                        };
                        i2c1_default_mode: i2c1_default {
                                i2c1_default_cfg {
-                                       ste,pins = "GPIO53_L4", "GPIO54_L3";
+                                       pins = "GPIO53_L4", "GPIO54_L3";
                                        ste,input = <0>;
                                };
                        };
                i2c2 {
                        i2c2_default_mode: i2c2_default {
                                i2c2_default_cfg {
-                                       ste,pins = "GPIO73_C21", "GPIO74_C20";
+                                       pins = "GPIO73_C21", "GPIO74_C20";
                                        ste,input = <0>;
                                };
                        };
index d43f8b19e7dd49efbefe331cf67a8f03e99a356d..206826a855c0dc0e5025539e5a8930405c8cdd56 100644 (file)
                                        };
                                        /* LAN IRQ pin */
                                        snowball_cfg1 {
-                                               ste,pins = "GPIO140_B11";
+                                               pins = "GPIO140_B11";
                                                ste,config = <&in_nopull>;
                                        };
                                        /* LAN reset pin */
                                        snowball_cfg2 {
-                                               ste,pins = "GPIO141_C12";
+                                               pins = "GPIO141_C12";
                                                ste,config = <&gpio_out_hi>;
                                        };
 
                                                groups = "mc0dat31dir_a_1";
                                        };
                                        snowball_cfg1 {
-                                               ste,pins = "GPIO21_AB3"; /* DAT31DIR */
+                                               pins = "GPIO21_AB3"; /* DAT31DIR */
                                                ste,config = <&out_hi>;
                                        };
 
                                                groups = "ssp0_a_1";
                                        };
                                        snowball_cfg1 {
-                                               ste,pins = "GPIO144_B13"; /* FRM */
+                                               pins = "GPIO144_B13"; /* FRM */
                                                ste,config = <&gpio_out_hi>;
                                        };
                                        snowball_cfg2 {
-                                               ste,pins = "GPIO145_C13"; /* RXD */
+                                               pins = "GPIO145_C13"; /* RXD */
                                                ste,config = <&in_pd>;
                                        };
                                        snowball_cfg3 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO146_D13", /* TXD */
                                                "GPIO143_D12"; /* CLK */
                                                ste,config = <&out_lo>;
                        gpio_led {
                                gpioled_snowball_mode: gpioled_default {
                                        snowball_cfg1 {
-                                               ste,pins = "GPIO142_C11";
+                                               pins = "GPIO142_C11";
                                                ste,config = <&gpio_out_hi>;
                                        };
 
                                accel_snowball_mode: accel_snowball {
                                        /* Accelerometer lines */
                                        snowball_cfg1 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO163_C20", /* ACCEL_IRQ1 */
                                                "GPIO164_B21"; /* ACCEL_IRQ2 */
                                                ste,config = <&gpio_in_pu>;
                        magnetometer {
                                magneto_snowball_mode: magneto_snowball {
                                        snowball_cfg1 {
-                                               ste,pins = "GPIO165_C21"; /* MAG_DRDY */
+                                               pins = "GPIO165_C21"; /* MAG_DRDY */
                                                ste,config = <&gpio_in_pu>;
                                        };
                                };
                                         * pull low to reset state
                                         */
                                        snowball_cfg1 {
-                                               ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */
+                                               pins = "GPIO171_D23"; /* GBF_ENA_RESET */
                                                ste,config = <&gpio_out_lo>;
                                        };
                                 };
                                         * These are plain GPIO pins used by WLAN
                                         */
                                        snowball_cfg1 {
-                                               ste,pins =
+                                               pins =
                                                "GPIO161_D21", /* WLAN_PMU_EN */
                                                "GPIO215_AH13"; /* WLAN_ENA */
                                                ste,config = <&gpio_out_lo>;
                                        };
                                        snowball_cfg2 {
-                                               ste,pins = "GPIO216_AG12"; /* WLAN_IRQ */
+                                               pins = "GPIO216_AG12"; /* WLAN_IRQ */
                                                ste,config = <&gpio_in_pu>;
                                        };
                                };
index dec72f2e6a2b8220098fd2df34b8e17665d0e41f..ad99ba886e508d0e87df897a82933abb68081f03 100644 (file)
@@ -1552,7 +1552,7 @@ static int nmk_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
                const char *gpio_name;
                const char *pin;
 
-               ret = of_property_count_strings(np, "ste,pins");
+               ret = of_property_count_strings(np, "pins");
                if (ret < 0)
                        goto exit;
                ret = pinctrl_utils_reserve_map(pctldev, map,
@@ -1561,7 +1561,7 @@ static int nmk_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
                if (ret < 0)
                        goto exit;
 
-               of_property_for_each_string(np, "ste,pins", prop, pin) {
+               of_property_for_each_string(np, "pins", prop, pin) {
                        gpio_name = nmk_find_pin_name(pctldev, pin);
 
                        ret = nmk_dt_add_map_configs(map, reserved_maps,