ARM: h1940: Use gpiolib for latch access
authorVasily Khoruzhick <anarsoul@gmail.com>
Wed, 8 Sep 2010 09:39:46 +0000 (12:39 +0300)
committerBen Dooks <ben-linux@fluff.org>
Sat, 25 Sep 2010 23:45:18 +0000 (00:45 +0100)
This patch adds gpiolib support for h1940 latch.
With this patch it's possible to use leds-gpio and uda1380
drivers (they require gpiolib support for appropriate pins).
And now it's possible to drop leds-h1940 driver.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
arch/arm/mach-s3c2410/h1940-bluetooth.c
arch/arm/mach-s3c2410/include/mach/h1940-latch.h
arch/arm/mach-s3c2410/mach-h1940.c
arch/arm/plat-s3c24xx/Kconfig

index 8cdeb14af5929601492a74a593e9322f3a947c91..8aa2f1902a94092e0379d5d46fb1de734a3c0eb9 100644 (file)
@@ -30,7 +30,7 @@ static void h1940bt_enable(int on)
 {
        if (on) {
                /* Power on the chip */
-               h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
+               gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 1);
                /* Reset the chip */
                mdelay(10);
 
@@ -43,7 +43,7 @@ static void h1940bt_enable(int on)
                mdelay(10);
                gpio_set_value(S3C2410_GPH(1), 0);
                mdelay(10);
-               h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
+               gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 0);
        }
 }
 
@@ -64,7 +64,14 @@ static int __devinit h1940bt_probe(struct platform_device *pdev)
 
        ret = gpio_request(S3C2410_GPH(1), dev_name(&pdev->dev));
        if (ret) {
-               dev_err(&pdev->dev, "could not get GPH1\n");\
+               dev_err(&pdev->dev, "could not get GPH1\n");
+               return ret;
+       }
+
+       ret = gpio_request(H1940_LATCH_BLUETOOTH_POWER, dev_name(&pdev->dev));
+       if (ret) {
+               gpio_free(S3C2410_GPH(1));
+               dev_err(&pdev->dev, "could not get BT_POWER\n");
                return ret;
        }
 
index d8a832729a8a38a5ab28f44549903e707301b907..73586f20930e3cff8ef2a3df8962766ac61a896d 100644 (file)
 #ifndef __ASM_ARCH_H1940_LATCH_H
 #define __ASM_ARCH_H1940_LATCH_H
 
+#include <mach/gpio.h>
 
-#ifndef __ASSEMBLY__
-#define H1940_LATCH            ((void __force __iomem *)0xF8000000)
-#else
-#define H1940_LATCH            0xF8000000
-#endif
-
-#define H1940_PA_LATCH         (S3C2410_CS2)
+#define H1940_LATCH_GPIO(x)            (S3C_GPIO_END + (x))
 
 /* SD layer latch */
 
-#define H1940_LATCH_SDQ1               (1<<16)
-#define H1940_LATCH_LCD_P1             (1<<17)
-#define H1940_LATCH_LCD_P2             (1<<18)
-#define H1940_LATCH_LCD_P3             (1<<19)
-#define H1940_LATCH_MAX1698_nSHUTDOWN  (1<<20)         /* LCD backlight */
-#define H1940_LATCH_LED_RED            (1<<21)
-#define H1940_LATCH_SDQ7               (1<<22)
-#define H1940_LATCH_USB_DP             (1<<23)
+#define H1940_LATCH_SDQ1               H1940_LATCH_GPIO(0)
+#define H1940_LATCH_LCD_P1             H1940_LATCH_GPIO(1)
+#define H1940_LATCH_LCD_P2             H1940_LATCH_GPIO(2)
+#define H1940_LATCH_LCD_P3             H1940_LATCH_GPIO(3)
+#define H1940_LATCH_MAX1698_nSHUTDOWN  H1940_LATCH_GPIO(4)
+#define H1940_LATCH_LED_RED            H1940_LATCH_GPIO(5)
+#define H1940_LATCH_SDQ7               H1940_LATCH_GPIO(6)
+#define H1940_LATCH_USB_DP             H1940_LATCH_GPIO(7)
 
 /* CPU layer latch */
 
-#define H1940_LATCH_UDA_POWER          (1<<24)
-#define H1940_LATCH_AUDIO_POWER                (1<<25)
-#define H1940_LATCH_SM803_ENABLE       (1<<26)
-#define H1940_LATCH_LCD_P4             (1<<27)
-#define H1940_LATCH_CPUQ5              (1<<28)         /* untraced */
-#define H1940_LATCH_BLUETOOTH_POWER    (1<<29)         /* active high */
-#define H1940_LATCH_LED_GREEN          (1<<30)
-#define H1940_LATCH_LED_FLASH          (1<<31)
-
-/* default settings */
-
-#define H1940_LATCH_DEFAULT            \
-       H1940_LATCH_LCD_P4              | \
-       H1940_LATCH_SM803_ENABLE        | \
-       H1940_LATCH_SDQ1                | \
-       H1940_LATCH_LCD_P1              | \
-       H1940_LATCH_LCD_P2              | \
-       H1940_LATCH_LCD_P3              | \
-       H1940_LATCH_MAX1698_nSHUTDOWN   | \
-       H1940_LATCH_CPUQ5
-
-/* control functions */
-
-extern void h1940_latch_control(unsigned int clear, unsigned int set);
+#define H1940_LATCH_UDA_POWER          H1940_LATCH_GPIO(8)
+#define H1940_LATCH_AUDIO_POWER                H1940_LATCH_GPIO(9)
+#define H1940_LATCH_SM803_ENABLE       H1940_LATCH_GPIO(10)
+#define H1940_LATCH_LCD_P4             H1940_LATCH_GPIO(11)
+#define H1940_LATCH_CPUQ5              H1940_LATCH_GPIO(12)
+#define H1940_LATCH_BLUETOOTH_POWER    H1940_LATCH_GPIO(13)
+#define H1940_LATCH_LED_GREEN          H1940_LATCH_GPIO(14)
+#define H1940_LATCH_LED_FLASH          H1940_LATCH_GPIO(15)
 
 #endif /* __ASM_ARCH_H1940_LATCH_H */
index 3ba3bab139d0917ce45feaeb079573428f8a2af2..f0493bdbf0dcb8363ec3f09f42f36c945e91c207 100644 (file)
 #include <plat/mci.h>
 #include <plat/ts.h>
 
+#define H1940_LATCH            ((void __force __iomem *)0xF8000000)
+
+#define H1940_PA_LATCH         S3C2410_CS2
+
+#define H1940_LATCH_BIT(x)     (1 << ((x) + 16 - S3C_GPIO_END))
+
 static struct map_desc h1940_iodesc[] __initdata = {
        [0] = {
                .virtual        = (unsigned long)H1940_LATCH,
@@ -100,9 +106,16 @@ static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = {
 
 /* Board control latch control */
 
-static unsigned int latch_state = H1940_LATCH_DEFAULT;
+static unsigned int latch_state = H1940_LATCH_BIT(H1940_LATCH_LCD_P4) |
+       H1940_LATCH_BIT(H1940_LATCH_SM803_ENABLE)       |
+       H1940_LATCH_BIT(H1940_LATCH_SDQ1)                       |
+       H1940_LATCH_BIT(H1940_LATCH_LCD_P1)                     |
+       H1940_LATCH_BIT(H1940_LATCH_LCD_P2)                     |
+       H1940_LATCH_BIT(H1940_LATCH_LCD_P3)                     |
+       H1940_LATCH_BIT(H1940_LATCH_MAX1698_nSHUTDOWN)   |
+       H1940_LATCH_BIT(H1940_LATCH_CPUQ5);
 
-void h1940_latch_control(unsigned int clear, unsigned int set)
+static void h1940_latch_control(unsigned int clear, unsigned int set)
 {
        unsigned long flags;
 
@@ -116,7 +129,42 @@ void h1940_latch_control(unsigned int clear, unsigned int set)
        local_irq_restore(flags);
 }
 
-EXPORT_SYMBOL_GPL(h1940_latch_control);
+static inline int h1940_gpiolib_to_latch(int offset)
+{
+       return 1 << (offset + 16);
+}
+
+static void h1940_gpiolib_latch_set(struct gpio_chip *chip,
+                                       unsigned offset, int value)
+{
+       int latch_bit = h1940_gpiolib_to_latch(offset);
+
+       h1940_latch_control(value ? 0 : latch_bit,
+               value ? latch_bit : 0);
+}
+
+static int h1940_gpiolib_latch_output(struct gpio_chip *chip,
+                                       unsigned offset, int value)
+{
+       h1940_gpiolib_latch_set(chip, offset, value);
+       return 0;
+}
+
+static int h1940_gpiolib_latch_get(struct gpio_chip *chip,
+                                       unsigned offset)
+{
+       return (latch_state >> (offset + 16)) & 1;
+}
+
+struct gpio_chip h1940_latch_gpiochip = {
+       .base                   = H1940_LATCH_GPIO(0),
+       .owner                  = THIS_MODULE,
+       .label                  = "H1940_LATCH",
+       .ngpio                  = 16,
+       .direction_output       = h1940_gpiolib_latch_output,
+       .set                    = h1940_gpiolib_latch_set,
+       .get                    = h1940_gpiolib_latch_get,
+};
 
 static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 {
@@ -125,10 +173,10 @@ static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
        switch (cmd)
        {
                case S3C2410_UDC_P_ENABLE :
-                       h1940_latch_control(0, H1940_LATCH_USB_DP);
+                       gpio_set_value(H1940_LATCH_USB_DP, 1);
                        break;
                case S3C2410_UDC_P_DISABLE :
-                       h1940_latch_control(H1940_LATCH_USB_DP, 0);
+                       gpio_set_value(H1940_LATCH_USB_DP, 0);
                        break;
                case S3C2410_UDC_P_RESET :
                        break;
@@ -303,6 +351,8 @@ static void __init h1940_map_io(void)
        memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
 #endif
        s3c_pm_init();
+
+       WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
 }
 
 /* H1940 and RX3715 need to reserve this for suspend */
@@ -342,9 +392,11 @@ static void __init h1940_init(void)
        gpio_request(S3C2410_GPC(0), "LCD power");
        gpio_request(S3C2410_GPC(5), "LCD power");
        gpio_request(S3C2410_GPC(6), "LCD power");
-
        gpio_direction_input(S3C2410_GPC(6));
 
+       gpio_request(H1940_LATCH_USB_DP, "USB pullup");
+       gpio_direction_output(H1940_LATCH_USB_DP, 0);
+
        platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
 }
 
index 984bf66826d2a54773a57a316839ab346c1e6b1e..5a27b1b538f2885eab6cd6ccdfd670834607f665 100644 (file)
@@ -69,6 +69,7 @@ config S3C24XX_GPIO_EXTRA
        int
        default 128 if S3C24XX_GPIO_EXTRA128
        default 64 if S3C24XX_GPIO_EXTRA64
+       default 16 if ARCH_H1940
        default 0
 
 config S3C24XX_GPIO_EXTRA64