[PARISC] GENERIC_TIME patchset for parisc
authorHelge Deller <deller@gmx.de>
Tue, 2 Jan 2007 22:54:16 +0000 (23:54 +0100)
committerKyle McMartin <kyle@athena.road.mcmartin.ca>
Sat, 17 Feb 2007 06:02:29 +0000 (01:02 -0500)
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
arch/parisc/Kconfig
arch/parisc/kernel/time.c

index 848a67a024b2b3406d6084a9e9b849d74d5a403d..e18eeecae850c2a2a565dc2a3b46a293b8dc5924 100644 (file)
@@ -50,6 +50,10 @@ config GENERIC_CALIBRATE_DELAY
        bool
        default y
 
+config GENERIC_TIME
+       bool
+       default y
+
 config TIME_LOW_RES
        bool
        depends on SMP
index bad7d1eb62b975dff89921860ca30e816e948de3..e47e27cea42ea97002fd724f871abf88fb4bfea5 100644 (file)
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/profile.h>
+#include <linux/clocksource.h>
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
@@ -172,121 +173,23 @@ unsigned long profile_pc(struct pt_regs *regs)
 EXPORT_SYMBOL(profile_pc);
 
 
-/*
- * Return the number of micro-seconds that elapsed since the last
- * update to wall time (aka xtime).  The xtime_lock
- * must be at least read-locked when calling this routine.
- */
-static inline unsigned long gettimeoffset (void)
-{
-#ifndef CONFIG_SMP
-       /*
-        * FIXME: This won't work on smp because jiffies are updated by cpu 0.
-        *    Once parisc-linux learns the cr16 difference between processors,
-        *    this could be made to work.
-        */
-       unsigned long now;
-       unsigned long prev_tick;
-       unsigned long next_tick;
-       unsigned long elapsed_cycles;
-       unsigned long usec;
-       unsigned long cpuid = smp_processor_id();
-       unsigned long cpt = clocktick;
+/* clock source code */
 
-       next_tick = cpu_data[cpuid].it_value;
-       now = mfctl(16);        /* Read the hardware interval timer.  */
-
-       prev_tick = next_tick - cpt;
-
-       /* Assume Scenario 1: "now" is later than prev_tick.  */
-       elapsed_cycles = now - prev_tick;
-
-/* aproximate HZ with shifts. Intended math is "(elapsed/clocktick) > HZ" */
-#if HZ == 1000
-       if (elapsed_cycles > (cpt << 10) )
-#elif HZ == 250
-       if (elapsed_cycles > (cpt << 8) )
-#elif HZ == 100
-       if (elapsed_cycles > (cpt << 7) )
-#else
-#warn WTF is HZ set to anyway?
-       if (elapsed_cycles > (HZ * cpt) )
-#endif
-       {
-               /* Scenario 3: clock ticks are missing. */
-               printk (KERN_CRIT "gettimeoffset(CPU %ld): missing %ld ticks!"
-                       " cycles %lX prev/now/next %lX/%lX/%lX  clock %lX\n",
-                       cpuid, elapsed_cycles / cpt,
-                       elapsed_cycles, prev_tick, now, next_tick, cpt);
-       }
-
-       /* FIXME: Can we improve the precision? Not with PAGE0. */
-       usec = (elapsed_cycles * 10000) / PAGE0->mem_10msec;
-       return usec;
-#else
-       return 0;
-#endif
-}
-
-void
-do_gettimeofday (struct timeval *tv)
+static cycle_t read_cr16(void)
 {
-       unsigned long flags, seq, usec, sec;
-
-       /* Hold xtime_lock and adjust timeval.  */
-       do {
-               seq = read_seqbegin_irqsave(&xtime_lock, flags);
-               usec = gettimeoffset();
-               sec = xtime.tv_sec;
-               usec += (xtime.tv_nsec / 1000);
-       } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
-       /* Move adjusted usec's into sec's.  */
-       while (usec >= USEC_PER_SEC) {
-               usec -= USEC_PER_SEC;
-               ++sec;
-       }
-
-       /* Return adjusted result.  */
-       tv->tv_sec = sec;
-       tv->tv_usec = usec;
+       return get_cycles();
 }
 
-EXPORT_SYMBOL(do_gettimeofday);
-
-int
-do_settimeofday (struct timespec *tv)
-{
-       time_t wtm_sec, sec = tv->tv_sec;
-       long wtm_nsec, nsec = tv->tv_nsec;
-
-       if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-               return -EINVAL;
-
-       write_seqlock_irq(&xtime_lock);
-       {
-               /*
-                * This is revolting. We need to set "xtime"
-                * correctly. However, the value in this location is
-                * the value at the most recent update of wall time.
-                * Discover what correction gettimeofday would have
-                * done, and then undo it!
-                */
-               nsec -= gettimeoffset() * 1000;
+static struct clocksource clocksource_cr16 = {
+       .name                   = "cr16",
+       .rating                 = 300,
+       .read                   = read_cr16,
+       .mask                   = CLOCKSOURCE_MASK(BITS_PER_LONG),
+       .mult                   = 0, /* to be set */
+       .shift                  = 22,
+       .is_continuous          = 1,
+};
 
-               wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-               wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-               set_normalized_timespec(&xtime, sec, nsec);
-               set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-               ntp_clear();
-       }
-       write_sequnlock_irq(&xtime_lock);
-       clock_was_set();
-       return 0;
-}
-EXPORT_SYMBOL(do_settimeofday);
 
 /*
  * XXX: We can do better than this.
@@ -312,11 +215,22 @@ void __init start_cpu_itimer(void)
 void __init time_init(void)
 {
        static struct pdc_tod tod_data;
+       unsigned long current_cr16_khz;
 
        clocktick = (100 * PAGE0->mem_10msec) / HZ;
 
        start_cpu_itimer();     /* get CPU 0 started */
 
+       /* register at clocksource framework */
+       current_cr16_khz = PAGE0->mem_10msec/10;  /* kHz */
+       clocksource_cr16.mult = clocksource_khz2mult(current_cr16_khz,
+                                               clocksource_cr16.shift);
+       /* lower the rating if we already know its unstable: */
+       if (num_online_cpus()>1)
+               clocksource_cr16.rating = 200;
+
+       clocksource_register(&clocksource_cr16);
+
        if (pdc_tod_read(&tod_data) == 0) {
                unsigned long flags;