wl1251: make wl1251_set_partition bus agnostic
authorBob Copeland <me@bobcopeland.com>
Fri, 7 Aug 2009 10:33:18 +0000 (13:33 +0300)
committerJohn W. Linville <linville@tuxdriver.com>
Fri, 14 Aug 2009 13:13:37 +0000 (09:13 -0400)
The same partition setting code can be used for both SPI and SDIO
modes, if we remove the spi-specific commands and use the more
generic buffer write routines.  Do that and move it to io.c
since it deals with register/memory address offsets.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/wl12xx/wl1251_io.c
drivers/net/wireless/wl12xx/wl1251_io.h
drivers/net/wireless/wl12xx/wl1251_spi.c
drivers/net/wireless/wl12xx/wl1251_spi.h

index bc957858b9f6d22269ce74684fe596d31aa3dc32..db2cfbfb1e40740e3e6fd81d9295a84ea861eb8f 100644 (file)
@@ -84,3 +84,98 @@ void wl1251_reg_write32(struct wl1251 *wl, int addr, u32 val)
 {
        wl1251_write32(wl, wl1251_translate_reg_addr(wl, addr), val);
 }
+
+/* Set the partitions to access the chip addresses.
+ *
+ * There are two VIRTUAL partitions (the memory partition and the
+ * registers partition), which are mapped to two different areas of the
+ * PHYSICAL (hardware) memory.  This function also makes other checks to
+ * ensure that the partitions are not overlapping.  In the diagram below, the
+ * memory partition comes before the register partition, but the opposite is
+ * also supported.
+ *
+ *                               PHYSICAL address
+ *                                     space
+ *
+ *                                    |    |
+ *                                 ...+----+--> mem_start
+ *          VIRTUAL address     ...   |    |
+ *               space       ...      |    | [PART_0]
+ *                        ...         |    |
+ * 0x00000000 <--+----+...         ...+----+--> mem_start + mem_size
+ *               |    |         ...   |    |
+ *               |MEM |      ...      |    |
+ *               |    |   ...         |    |
+ *  part_size <--+----+...            |    | {unused area)
+ *               |    |   ...         |    |
+ *               |REG |      ...      |    |
+ *  part_size    |    |         ...   |    |
+ *      +     <--+----+...         ...+----+--> reg_start
+ *  reg_size              ...         |    |
+ *                           ...      |    | [PART_1]
+ *                              ...   |    |
+ *                                 ...+----+--> reg_start + reg_size
+ *                                    |    |
+ *
+ */
+void wl1251_set_partition(struct wl1251 *wl,
+                         u32 mem_start, u32 mem_size,
+                         u32 reg_start, u32 reg_size)
+{
+       struct wl1251_partition partition[2];
+
+       wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+                    mem_start, mem_size);
+       wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+                    reg_start, reg_size);
+
+       /* Make sure that the two partitions together don't exceed the
+        * address range */
+       if ((mem_size + reg_size) > HW_ACCESS_MEMORY_MAX_RANGE) {
+               wl1251_debug(DEBUG_SPI, "Total size exceeds maximum virtual"
+                            " address range.  Truncating partition[0].");
+               mem_size = HW_ACCESS_MEMORY_MAX_RANGE - reg_size;
+               wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+                            mem_start, mem_size);
+               wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+                            reg_start, reg_size);
+       }
+
+       if ((mem_start < reg_start) &&
+           ((mem_start + mem_size) > reg_start)) {
+               /* Guarantee that the memory partition doesn't overlap the
+                * registers partition */
+               wl1251_debug(DEBUG_SPI, "End of partition[0] is "
+                            "overlapping partition[1].  Adjusted.");
+               mem_size = reg_start - mem_start;
+               wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+                            mem_start, mem_size);
+               wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+                            reg_start, reg_size);
+       } else if ((reg_start < mem_start) &&
+                  ((reg_start + reg_size) > mem_start)) {
+               /* Guarantee that the register partition doesn't overlap the
+                * memory partition */
+               wl1251_debug(DEBUG_SPI, "End of partition[1] is"
+                            " overlapping partition[0].  Adjusted.");
+               reg_size = mem_start - reg_start;
+               wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+                            mem_start, mem_size);
+               wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+                            reg_start, reg_size);
+       }
+
+       partition[0].start = mem_start;
+       partition[0].size  = mem_size;
+       partition[1].start = reg_start;
+       partition[1].size  = reg_size;
+
+       wl->physical_mem_addr = mem_start;
+       wl->physical_reg_addr = reg_start;
+
+       wl->virtual_mem_addr = 0;
+       wl->virtual_reg_addr = mem_size;
+
+       wl->if_ops->write(wl, HW_ACCESS_PART0_SIZE_ADDR, partition,
+               sizeof(partition));
+}
index 1fa2ab18a9e180c0d80fb3cdf4ba0cb9a7218ff5..b89d2ac62efb04275e0e5f49073a31e3082d16c6 100644 (file)
 
 #include "wl1251.h"
 
+#define HW_ACCESS_MEMORY_MAX_RANGE             0x1FFC0
+
+#define HW_ACCESS_PART0_SIZE_ADDR           0x1FFC0
+#define HW_ACCESS_PART0_START_ADDR          0x1FFC4
+#define HW_ACCESS_PART1_SIZE_ADDR           0x1FFC8
+#define HW_ACCESS_PART1_START_ADDR          0x1FFCC
+
+#define HW_ACCESS_REGISTER_SIZE             4
+
+#define HW_ACCESS_PRAM_MAX_RANGE               0x3c000
+
 static inline u32 wl1251_read32(struct wl1251 *wl, int addr)
 {
        u32 response;
@@ -46,4 +57,8 @@ void wl1251_mem_write32(struct wl1251 *wl, int addr, u32 val);
 u32 wl1251_reg_read32(struct wl1251 *wl, int addr);
 void wl1251_reg_write32(struct wl1251 *wl, int addr, u32 val);
 
+void wl1251_set_partition(struct wl1251 *wl,
+                         u32 part_start, u32 part_size,
+                         u32 reg_start,  u32 reg_size);
+
 #endif
index 61a0852b4ee7b08719a46b7b6c030b7e8d60d4b7..ceb237b4e579f028a77c6a8dfad66df7b2a6dfe5 100644 (file)
@@ -115,130 +115,6 @@ static void wl1251_spi_reset_wake(struct wl1251 *wl)
        wl1251_spi_init(wl);
 }
 
-
-/* Set the SPI partitions to access the chip addresses
- *
- * There are two VIRTUAL (SPI) partitions (the memory partition and the
- * registers partition), which are mapped to two different areas of the
- * PHYSICAL (hardware) memory.  This function also makes other checks to
- * ensure that the partitions are not overlapping.  In the diagram below, the
- * memory partition comes before the register partition, but the opposite is
- * also supported.
- *
- *                               PHYSICAL address
- *                                     space
- *
- *                                    |    |
- *                                 ...+----+--> mem_start
- *          VIRTUAL address     ...   |    |
- *               space       ...      |    | [PART_0]
- *                        ...         |    |
- * 0x00000000 <--+----+...         ...+----+--> mem_start + mem_size
- *               |    |         ...   |    |
- *               |MEM |      ...      |    |
- *               |    |   ...         |    |
- *  part_size <--+----+...            |    | {unused area)
- *               |    |   ...         |    |
- *               |REG |      ...      |    |
- *  part_size    |    |         ...   |    |
- *      +     <--+----+...         ...+----+--> reg_start
- *  reg_size              ...         |    |
- *                           ...      |    | [PART_1]
- *                              ...   |    |
- *                                 ...+----+--> reg_start + reg_size
- *                                    |    |
- *
- */
-int wl1251_set_partition(struct wl1251 *wl,
-                         u32 mem_start, u32 mem_size,
-                         u32 reg_start, u32 reg_size)
-{
-       struct wl1251_partition *partition;
-       struct spi_transfer t;
-       struct spi_message m;
-       size_t len, cmd_len;
-       u32 *cmd;
-       int addr;
-
-       cmd_len = sizeof(u32) + 2 * sizeof(struct wl1251_partition);
-       cmd = kzalloc(cmd_len, GFP_KERNEL);
-       if (!cmd)
-               return -ENOMEM;
-
-       spi_message_init(&m);
-       memset(&t, 0, sizeof(t));
-
-       partition = (struct wl1251_partition *) (cmd + 1);
-       addr = HW_ACCESS_PART0_SIZE_ADDR;
-       len = 2 * sizeof(struct wl1251_partition);
-
-       *cmd |= WSPI_CMD_WRITE;
-       *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
-       *cmd |= addr & WSPI_CMD_BYTE_ADDR;
-
-       wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
-                    mem_start, mem_size);
-       wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
-                    reg_start, reg_size);
-
-       /* Make sure that the two partitions together don't exceed the
-        * address range */
-       if ((mem_size + reg_size) > HW_ACCESS_MEMORY_MAX_RANGE) {
-               wl1251_debug(DEBUG_SPI, "Total size exceeds maximum virtual"
-                            " address range.  Truncating partition[0].");
-               mem_size = HW_ACCESS_MEMORY_MAX_RANGE - reg_size;
-               wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
-                            mem_start, mem_size);
-               wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
-                            reg_start, reg_size);
-       }
-
-       if ((mem_start < reg_start) &&
-           ((mem_start + mem_size) > reg_start)) {
-               /* Guarantee that the memory partition doesn't overlap the
-                * registers partition */
-               wl1251_debug(DEBUG_SPI, "End of partition[0] is "
-                            "overlapping partition[1].  Adjusted.");
-               mem_size = reg_start - mem_start;
-               wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
-                            mem_start, mem_size);
-               wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
-                            reg_start, reg_size);
-       } else if ((reg_start < mem_start) &&
-                  ((reg_start + reg_size) > mem_start)) {
-               /* Guarantee that the register partition doesn't overlap the
-                * memory partition */
-               wl1251_debug(DEBUG_SPI, "End of partition[1] is"
-                            " overlapping partition[0].  Adjusted.");
-               reg_size = mem_start - reg_start;
-               wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
-                            mem_start, mem_size);
-               wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
-                            reg_start, reg_size);
-       }
-
-       partition[0].start = mem_start;
-       partition[0].size  = mem_size;
-       partition[1].start = reg_start;
-       partition[1].size  = reg_size;
-
-       wl->physical_mem_addr = mem_start;
-       wl->physical_reg_addr = reg_start;
-
-       wl->virtual_mem_addr = 0;
-       wl->virtual_reg_addr = mem_size;
-
-       t.tx_buf = cmd;
-       t.len = cmd_len;
-       spi_message_add_tail(&t, &m);
-
-       spi_sync(wl->spi, &m);
-
-       kfree(cmd);
-
-       return 0;
-}
-
 static void wl1251_spi_read(struct wl1251 *wl, int addr, void *buf,
                            size_t len)
 {
index 7c6da21cb00bc2a93f35eb874f333e0c9ade7a00..cb0c228dbc6cb3d40b861446294401c3e94f2058 100644 (file)
 #include "wl1251_acx.h"
 #include "reg.h"
 
-#define HW_ACCESS_MEMORY_MAX_RANGE             0x1FFC0
-
-#define HW_ACCESS_PART0_SIZE_ADDR           0x1FFC0
-#define HW_ACCESS_PART0_START_ADDR          0x1FFC4
-#define HW_ACCESS_PART1_SIZE_ADDR           0x1FFC8
-#define HW_ACCESS_PART1_START_ADDR          0x1FFCC
-
-#define HW_ACCESS_REGISTER_SIZE             4
-
-#define HW_ACCESS_PRAM_MAX_RANGE               0x3c000
-
 #define WSPI_CMD_READ                 0x40000000
 #define WSPI_CMD_WRITE                0x00000000
 #define WSPI_CMD_FIXED                0x20000000
@@ -69,8 +58,4 @@
                ((WL1251_BUSY_WORD_LEN - 4) / sizeof(u32))
 #define HW_ACCESS_WSPI_INIT_CMD_MASK  0
 
-int wl1251_set_partition(struct wl1251 *wl,
-                        u32 part_start, u32 part_size,
-                        u32 reg_start,  u32 reg_size);
-
 #endif /* __WL1251_SPI_H__ */