* Implement dominator based loop identification

* Implement cleaner induction variable identification

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@1359 91177308-0d34-0410-b5e6-96231b3b80d8

diff --git a/include/llvm/Analysis/InductionVariable.h b/include/llvm/Analysis/InductionVariable.h
new file mode 100644 (file)
index 0000000..02fa6de
--- /dev/null
+++ b/include/llvm/Analysis/InductionVariable.h
@@ -0,0 +1,53 @@
+//===- llvm/Analysis/InductionVariable.h - Induction variable ----*- C++ -*--=//
+//
+// This interface is used to identify and classify induction variables that
+// exist in the program.  Induction variables must contain a PHI node that
+// exists in a loop header.  Because of this, they are identified an managed by
+// this PHI node.
+//
+// Induction variables are classified into a type.  Knowing that an induction
+// variable is of a specific type can constrain the values of the start and
+// step.  For example, a SimpleLinear induction variable must have a start and
+// step values that are constants.
+//
+// Induction variables can be created with or without loop information.  If no
+// loop information is available, induction variables cannot be recognized to be
+// more than SimpleLinear variables.
+//
+//===----------------------------------------------------------------------===//
+
+#ifndef LLVM_ANALYSIS_INDUCTIONVARIABLE_H
+#define LLVM_ANALYSIS_INDUCTIONVARIABLE_H
+
+class Value;
+class PHINode;
+class Instruction;
+namespace cfg { class LoopInfo; class Loop; }
+
+class InductionVariable {
+public:
+  enum iType {               // Identify the type of this induction variable
+    Cannonical,              // Starts at 0, counts by 1
+    SimpleLinear,            // Simple linear: Constant start, constant step
+    Linear,                  // General linear:  loop invariant start, and step
+    Unknown,                 // Unknown type.  Start & Step are null
+  } InductionType;
+  
+  Value *Start, *Step;       // Start and step expressions for this indvar
+  PHINode *Phi;              // The PHI node that corresponds to this indvar
+public:
+
+  // Create an induction variable for the specified value.  If it is a PHI, and
+  // if it's recognizable, classify it and fill in instance variables.
+  //
+  InductionVariable(Instruction *V, cfg::LoopInfo *LoopInfo = 0);
+
+
+  // Classify Induction
+  static enum iType Classify(const Value *Start, const Value *Step,
+                            const cfg::Loop *L = 0);
+                                             
+
+};
+
+#endif

diff --git a/include/llvm/Analysis/LoopInfo.h b/include/llvm/Analysis/LoopInfo.h
new file mode 100644 (file)
index 0000000..3a20226
--- /dev/null
+++ b/include/llvm/Analysis/LoopInfo.h
@@ -0,0 +1,107 @@
+//===- llvm/Analysis/LoopInfo.h - Natural Loop Calculator --------*- C++ -*--=//
+//
+// This file defines the LoopInfo class that is used to identify natural loops
+// and determine the loop depth of various nodes of the CFG.  Note that the
+// loops identified may actually be several natural loops that share the same
+// header node... not just a single natural loop.
+//
+//===----------------------------------------------------------------------===//
+
+#ifndef LLVM_ANALYSIS_LOOP_INFO_H
+#define LLVM_ANALYSIS_LOOP_INFO_H
+
+#include <vector>
+#include <map>
+#include <set>
+class BasicBlock;
+
+namespace cfg {
+  class DominatorSet;
+  class LoopInfo;
+
+//===----------------------------------------------------------------------===//
+// Loop class - Instances of this class are used to represent loops that are 
+// detected in the flow graph 
+//
+class Loop {
+  Loop *ParentLoop;
+  vector<const BasicBlock *> Blocks; // First entry is the header node
+  vector<Loop*> SubLoops;            // Loops contained entirely within this one
+  unsigned LoopDepth;                // Nesting depth of this loop
+
+  Loop(const Loop &);                  // DO NOT IMPLEMENT
+  const Loop &operator=(const Loop &); // DO NOT IMPLEMENT
+public:
+
+  inline unsigned getLoopDepth() const { return LoopDepth; }
+  inline const BasicBlock *getHeader() const { return Blocks.front(); }
+
+  // contains - Return true of the specified basic block is in this loop
+  bool contains(const BasicBlock *BB) const;
+
+  // getSubLoops - Return the loops contained entirely within this loop
+  inline const vector<Loop*> &getSubLoops() const { return SubLoops; }
+  inline const vector<const BasicBlock*> &getBlocks() const { return Blocks; }
+
+private:
+  friend class LoopInfo;
+  inline Loop(const BasicBlock *BB) { Blocks.push_back(BB); LoopDepth = 0; }
+  
+  void setLoopDepth(unsigned Level) {
+    LoopDepth = Level;
+    for (unsigned i = 0; i < SubLoops.size(); ++i)
+      SubLoops[i]->setLoopDepth(Level+1);
+  }
+};
+
+
+
+//===----------------------------------------------------------------------===//
+// LoopInfo - This class builds and contains all of the top level loop
+// structures in the specified method.
+//
+class LoopInfo {
+  // BBMap - Mapping of basic blocks to the inner most loop they occur in
+  map<const BasicBlock *, Loop*> BBMap;
+  vector<Loop*> TopLevelLoops;
+public:
+  // LoopInfo ctor - Calculate the natural loop information for a CFG
+  LoopInfo(const DominatorSet &DS);
+
+  const vector<Loop*> &getTopLevelLoops() const { return TopLevelLoops; }
+
+  // getLoopFor - Return the inner most loop that BB lives in.  If a basic block
+  // is in no loop (for example the entry node), null is returned.
+  //
+  const Loop *getLoopFor(const BasicBlock *BB) const {
+    map<const BasicBlock *, Loop*>::const_iterator I = BBMap.find(BB);
+    return I != BBMap.end() ? I->second : 0;
+  }
+  inline const Loop *operator[](const BasicBlock *BB) const {
+    return getLoopFor(BB);
+  }
+
+  // getLoopDepth - Return the loop nesting level of the specified block...
+  unsigned getLoopDepth(const BasicBlock *BB) const {
+    const Loop *L = getLoopFor(BB);
+    return L ? L->getLoopDepth() : 0;
+  }
+
+#if 0
+  // isLoopHeader - True if the block is a loop header node
+  bool isLoopHeader(const BasicBlock *BB) const {
+    return getLoopFor(BB)->getHeader() == BB;
+  }
+  // isLoopEnd - True if block jumps to loop entry
+  bool isLoopEnd(const BasicBlock *BB) const;
+  // isLoopExit - True if block is the loop exit
+  bool isLoopExit(const BasicBlock *BB) const;
+#endif
+
+private:
+  Loop *ConsiderForLoop(const BasicBlock *BB, const DominatorSet &DS);
+};
+
+}  // End namespace cfg
+
+#endif

diff --git a/lib/Analysis/InductionVariable.cpp b/lib/Analysis/InductionVariable.cpp
new file mode 100644 (file)
index 0000000..706c778
--- /dev/null
+++ b/lib/Analysis/InductionVariable.cpp
@@ -0,0 +1,138 @@
+//===- llvm/Analysis/InductionVariable.h - Induction variable ----*- C++ -*--=//
+//
+// This interface is used to identify and classify induction variables that
+// exist in the program.  Induction variables must contain a PHI node that
+// exists in a loop header.  Because of this, they are identified an managed by
+// this PHI node.
+//
+// Induction variables are classified into a type.  Knowing that an induction
+// variable is of a specific type can constrain the values of the start and
+// step.  For example, a SimpleLinear induction variable must have a start and
+// step values that are constants.
+//
+// Induction variables can be created with or without loop information.  If no
+// loop information is available, induction variables cannot be recognized to be
+// more than SimpleLinear variables.
+//
+//===----------------------------------------------------------------------===//
+
+#include "llvm/Analysis/InductionVariable.h"
+#include "llvm/Analysis/LoopInfo.h"
+#include "llvm/Analysis/Expressions.h"
+#include "llvm/iOther.h"
+#include "llvm/Type.h"
+#include "llvm/ConstPoolVals.h"
+
+using analysis::ExprType;
+
+
+static bool isLoopInvariant(const Value *V, const cfg::Loop *L) {
+  if (isa<ConstPoolVal>(V) || isa<MethodArgument>(V) || isa<GlobalValue>(V))
+    return true;
+  
+  const Instruction *I = cast<Instruction>(V);
+  const BasicBlock *BB = I->getParent();
+
+  return !L->contains(BB);
+}
+
+enum InductionVariable::iType
+InductionVariable::Classify(const Value *Start, const Value *Step,
+                           const cfg::Loop *L = 0) {
+  // Check for cannonical and simple linear expressions now...
+  if (ConstPoolInt *CStart = dyn_cast<ConstPoolInt>(Start))
+    if (ConstPoolInt *CStep = dyn_cast<ConstPoolInt>(Step)) {
+      if (CStart->equalsInt(0) && CStep->equalsInt(1))
+       return Cannonical;
+      else
+       return SimpleLinear;
+    }
+
+  // Without loop information, we cannot do any better, so bail now...
+  if (L == 0) return Unknown;
+
+  if (isLoopInvariant(Start, L) && isLoopInvariant(Step, L))
+    return Linear;
+  return Unknown;
+}
+
+// Create an induction variable for the specified value.  If it is a PHI, and
+// if it's recognizable, classify it and fill in instance variables.
+//
+InductionVariable::InductionVariable(Instruction *V, cfg::LoopInfo *LoopInfo) {
+  InductionType = Unknown;     // Assume the worst
+  
+  // If this instruction is not a PHINode, it can't be an induction variable.
+  // Also, if the PHI node has more than two predecessors, we don't know how to
+  // handle it.
+  //
+  Phi = dyn_cast<PHINode>(V);
+  if (!Phi || Phi->getNumIncomingValues() != 2) return;
+
+  // If we have loop information, make sure that this PHI node is in the header
+  // of a loop...
+  //
+  const cfg::Loop *L = LoopInfo ? LoopInfo->getLoopFor(Phi->getParent()) : 0;
+  if (L && L->getHeader() != Phi->getParent())
+    return;
+
+  Value *V1 = Phi->getIncomingValue(0);
+  Value *V2 = Phi->getIncomingValue(1);
+
+  if (L == 0) {  // No loop information?  Base everything on expression analysis
+    ExprType E1 = analysis::ClassifyExpression(V1);
+    ExprType E2 = analysis::ClassifyExpression(V2);
+
+    if (E1.ExprTy > E2.ExprTy)        // Make E1 be the simpler expression
+      swap(E1, E2);
+    
+    // E1 must be a constant incoming value, and E2 must be a linear expression
+    // with respect to the PHI node.
+    //
+    if (E1.ExprTy > ExprType::Constant || E2.ExprTy != ExprType::Linear ||
+       E2.Var != Phi)
+      return;
+
+    // Okay, we have found an induction variable. Save the start and step values
+    const Type *ETy = Phi->getType();
+    if (ETy->isPointerType()) ETy = Type::ULongTy;
+
+    Start = (Value*)(E1.Offset ? E1.Offset : ConstPoolInt::get(ETy, 0));
+    Step  = (Value*)(E2.Offset ? E2.Offset : ConstPoolInt::get(ETy, 0));
+  } else {
+    // Okay, at this point, we know that we have loop information...
+
+    // Make sure that V1 is the incoming value, and V2 is from the backedge of
+    // the loop.
+    if (L->contains(Phi->getIncomingBlock(0)))     // Wrong order.  Swap now.
+      swap(V1, V2);
+    
+    Start = V1;     // We know that Start has to be loop invariant...
+    Step = 0;
+
+    if (V2 == Phi) {  // referencing the PHI directly?  Must have zero step
+      Step = ConstPoolVal::getNullConstant(Phi->getType());
+    } else if (BinaryOperator *I = dyn_cast<BinaryOperator>(V2)) {
+      // TODO: This could be much better...
+      if (I->getOpcode() == Instruction::Add) {
+       if (I->getOperand(0) == Phi)
+         Step = I->getOperand(1);
+       else if (I->getOperand(1) == Phi)
+         Step = I->getOperand(0);
+      }
+    }
+
+    if (Step == 0) {                  // Unrecognized step value...
+      ExprType StepE = analysis::ClassifyExpression(V2);
+      if (StepE.ExprTy != ExprType::Linear ||
+         StepE.Var != Phi) return;
+
+      const Type *ETy = Phi->getType();
+      if (ETy->isPointerType()) ETy = Type::ULongTy;
+      Step  = (Value*)(StepE.Offset ? StepE.Offset : ConstPoolInt::get(ETy, 0));
+    }
+  }
+
+  // Classify the induction variable type now...
+  InductionType = InductionVariable::Classify(Start, Step, L);
+}

diff --git a/lib/Analysis/LoopInfo.cpp b/lib/Analysis/LoopInfo.cpp
new file mode 100644 (file)
index 0000000..a240ec8
--- /dev/null
+++ b/lib/Analysis/LoopInfo.cpp
@@ -0,0 +1,81 @@
+//===- LoopInfo.cpp - Natural Loop Calculator -------------------------------=//
+//
+// This file defines the LoopInfo class that is used to identify natural loops
+// and determine the loop depth of various nodes of the CFG.  Note that the
+// loops identified may actually be several natural loops that share the same
+// header node... not just a single natural loop.
+//
+//===----------------------------------------------------------------------===//
+
+#include "llvm/Analysis/LoopInfo.h"
+#include "llvm/Analysis/Dominators.h"
+#include "llvm/Support/DepthFirstIterator.h"
+#include "llvm/BasicBlock.h"
+#include <algorithm>
+
+bool cfg::Loop::contains(const BasicBlock *BB) const {
+  return find(Blocks.begin(), Blocks.end(), BB) != Blocks.end();
+}
+
+cfg::LoopInfo::LoopInfo(const DominatorSet &DS) {
+  const BasicBlock *RootNode = DS.getRoot();
+
+  for (df_iterator<const BasicBlock*> NI = df_begin(RootNode),
+        NE = df_end(RootNode); NI != NE; ++NI)
+    if (Loop *L = ConsiderForLoop(*NI, DS))
+      TopLevelLoops.push_back(L);
+
+  for (unsigned i = 0; i < TopLevelLoops.size(); ++i)
+    TopLevelLoops[i]->setLoopDepth(1);
+}
+
+cfg::Loop *cfg::LoopInfo::ConsiderForLoop(const BasicBlock *BB,
+                                         const DominatorSet &DS) {
+  if (BBMap.find(BB) != BBMap.end()) return 0;   // Havn't processed this node?
+
+  vector<const BasicBlock *> TodoStack;
+
+  // Scan the predecessors of BB, checking to see if BB dominates any of
+  // them.
+  for (BasicBlock::pred_const_iterator I = BB->pred_begin(),
+        E = BB->pred_end(); I != E; ++I)
+    if (DS.dominates(BB, *I))   // If BB dominates it's predecessor...
+      TodoStack.push_back(*I);
+
+  if (TodoStack.empty()) return 0;  // Doesn't dominate any predecessors...
+
+  // Create a new loop to represent this basic block...
+  Loop *L = new Loop(BB);
+  BBMap[BB] = L;
+
+  while (!TodoStack.empty()) {  // Process all the nodes in the loop
+    const BasicBlock *X = TodoStack.back();
+    TodoStack.pop_back();
+
+    if (!L->contains(X)) {                  // As of yet unprocessed??
+      L->Blocks.push_back(X);
+
+      // Add all of the predecessors of X to the end of the work stack...
+      TodoStack.insert(TodoStack.end(), X->pred_begin(), X->pred_end());
+    }
+  }
+
+  // Add the basic blocks that comprise this loop to the BBMap so that this
+  // loop can be found for them.  Also check subsidary basic blocks to see if
+  // they start subloops of their own.
+  //
+  for (vector<const BasicBlock*>::reverse_iterator I = L->Blocks.rbegin(),
+        E = L->Blocks.rend(); I != E; ++I) {
+
+    // Check to see if this block starts a new loop
+    if (Loop *NewLoop = ConsiderForLoop(*I, DS)) {
+      L->SubLoops.push_back(NewLoop);
+      NewLoop->ParentLoop = L;
+    }
+  
+    if (BBMap.find(*I) == BBMap.end())
+      BBMap.insert(make_pair(*I, L));
+  }
+
+  return L;
+}