which are 'A'live, and the array is 2/490221568 complete with recovery.
Faulty or missing devices are marked 'D'. Devices that are out-of-sync
are marked 'a'.
+
+
+Version History
+---------------
+1.0.0 Initial version. Support for RAID 4/5/6
+1.1.0 Added support for RAID 1
+1.2.0 Handle creation of arrays that contain failed devices.
+1.3.0 Added support for RAID 10
+1.3.1 Allow device replacement/rebuild for RAID 10
-include include/asm-generic/Kbuild.asm
-header-y += elf.h
header-y += ucontext.h
generic-y += atomic.h
+++ /dev/null
-#include <linux/byteorder/big_endian.h>
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-
#ifndef __ASM_OPENRISC_ELF_H
#define __ASM_OPENRISC_ELF_H
-/*
- * This files is partially exported to userspace. This allows us to keep
- * the ELF bits in one place which should assist in keeping the kernel and
- * userspace in sync.
- */
-
-/*
- * ELF register definitions..
- */
-
-/* for struct user_regs_struct definition */
-#include <asm/ptrace.h>
-
-/* The OR1K relocation types... not all relevant for module loader */
-#define R_OR32_NONE 0
-#define R_OR32_32 1
-#define R_OR32_16 2
-#define R_OR32_8 3
-#define R_OR32_CONST 4
-#define R_OR32_CONSTH 5
-#define R_OR32_JUMPTARG 6
-#define R_OR32_VTINHERIT 7
-#define R_OR32_VTENTRY 8
-
-typedef unsigned long elf_greg_t;
-
-/*
- * Note that NGREG is defined to ELF_NGREG in include/linux/elfcore.h, and is
- * thus exposed to user-space.
- */
-#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-/* A placeholder; OR32 does not have fp support yes, so no fp regs for now. */
-typedef unsigned long elf_fpregset_t;
-
-/* This should be moved to include/linux/elf.h */
-#define EM_OR32 0x8472
-#define EM_OPENRISC 92 /* OpenRISC 32-bit embedded processor */
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_ARCH EM_OR32
-#define ELF_CLASS ELFCLASS32
-#define ELF_DATA ELFDATA2MSB
-
-#ifdef __KERNEL__
#include <linux/types.h>
+#include <uapi/asm/elf.h>
/*
* This is used to ensure we don't load something for the wrong architecture.
#define SET_PERSONALITY(ex) \
set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
-#endif /* __KERNEL__ */
#endif
+++ /dev/null
-#include <asm-generic/kvm_para.h>
+++ /dev/null
-/*
- * OpenRISC Linux
- *
- * Linux architectural port borrowing liberally from similar works of
- * others. All original copyrights apply as per the original source
- * declaration.
- *
- * OpenRISC implementation:
- * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
- * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
- * et al.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __ASM_OPENRISC_PARAM_H
-#define __ASM_OPENRISC_PARAM_H
-
-#define EXEC_PAGESIZE 8192
-
-#include <asm-generic/param.h>
-
-#endif /* __ASM_OPENRISC_PARAM_H */
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-
#ifndef __ASM_OPENRISC_PTRACE_H
#define __ASM_OPENRISC_PTRACE_H
-#ifndef __ASSEMBLY__
-/*
- * This is the layout of the regset returned by the GETREGSET ptrace call
- */
-struct user_regs_struct {
- /* GPR R0-R31... */
- unsigned long gpr[32];
- unsigned long pc;
- unsigned long sr;
-};
-#endif
-
-#ifdef __KERNEL__
#include <asm/spr_defs.h>
+#include <uapi/asm/ptrace.h>
/*
* Make kernel PTrace/register structures opaque to userspace... userspace can
#define PT_ORIG_GPR11 132
#define PT_SYSCALLNO 136
-#endif /* __KERNEL__ */
-
#endif /* __ASM_OPENRISC_PTRACE_H */
+++ /dev/null
-/*
- * OpenRISC Linux
- *
- * Linux architectural port borrowing liberally from similar works of
- * others. All original copyrights apply as per the original source
- * declaration.
- *
- * OpenRISC implementation:
- * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
- * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
- * et al.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __ASM_OPENRISC_SIGCONTEXT_H
-#define __ASM_OPENRISC_SIGCONTEXT_H
-
-#include <asm/ptrace.h>
-
-/* This struct is saved by setup_frame in signal.c, to keep the current
- context while a signal handler is executed. It's restored by sys_sigreturn.
-*/
-
-struct sigcontext {
- struct user_regs_struct regs; /* needs to be first */
- unsigned long oldmask;
-};
-
-#endif /* __ASM_OPENRISC_SIGCONTEXT_H */
+++ /dev/null
-/*
- * OpenRISC Linux
- *
- * Linux architectural port borrowing liberally from similar works of
- * others. All original copyrights apply as per the original source
- * declaration.
- *
- * OpenRISC implementation:
- * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
- * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
- * et al.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#define __ARCH_HAVE_MMU
-
-#define sys_mmap2 sys_mmap_pgoff
-
-#include <asm-generic/unistd.h>
-
-#define __NR_or1k_atomic __NR_arch_specific_syscall
-__SYSCALL(__NR_or1k_atomic, sys_or1k_atomic)
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+header-y += byteorder.h
+header-y += elf.h
+header-y += kvm_para.h
+header-y += param.h
+header-y += ptrace.h
+header-y += sigcontext.h
+header-y += unistd.h
--- /dev/null
+#include <linux/byteorder/big_endian.h>
--- /dev/null
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _UAPI__ASM_OPENRISC_ELF_H
+#define _UAPI__ASM_OPENRISC_ELF_H
+
+/*
+ * This files is partially exported to userspace. This allows us to keep
+ * the ELF bits in one place which should assist in keeping the kernel and
+ * userspace in sync.
+ */
+
+/*
+ * ELF register definitions..
+ */
+
+/* for struct user_regs_struct definition */
+#include <asm/ptrace.h>
+
+/* The OR1K relocation types... not all relevant for module loader */
+#define R_OR32_NONE 0
+#define R_OR32_32 1
+#define R_OR32_16 2
+#define R_OR32_8 3
+#define R_OR32_CONST 4
+#define R_OR32_CONSTH 5
+#define R_OR32_JUMPTARG 6
+#define R_OR32_VTINHERIT 7
+#define R_OR32_VTENTRY 8
+
+typedef unsigned long elf_greg_t;
+
+/*
+ * Note that NGREG is defined to ELF_NGREG in include/linux/elfcore.h, and is
+ * thus exposed to user-space.
+ */
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+/* A placeholder; OR32 does not have fp support yes, so no fp regs for now. */
+typedef unsigned long elf_fpregset_t;
+
+/* This should be moved to include/linux/elf.h */
+#define EM_OR32 0x8472
+#define EM_OPENRISC 92 /* OpenRISC 32-bit embedded processor */
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_ARCH EM_OR32
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2MSB
+
+#endif /* _UAPI__ASM_OPENRISC_ELF_H */
--- /dev/null
+#include <asm-generic/kvm_para.h>
--- /dev/null
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_PARAM_H
+#define __ASM_OPENRISC_PARAM_H
+
+#define EXEC_PAGESIZE 8192
+
+#include <asm-generic/param.h>
+
+#endif /* __ASM_OPENRISC_PARAM_H */
--- /dev/null
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _UAPI__ASM_OPENRISC_PTRACE_H
+#define _UAPI__ASM_OPENRISC_PTRACE_H
+
+#ifndef __ASSEMBLY__
+/*
+ * This is the layout of the regset returned by the GETREGSET ptrace call
+ */
+struct user_regs_struct {
+ /* GPR R0-R31... */
+ unsigned long gpr[32];
+ unsigned long pc;
+ unsigned long sr;
+};
+#endif
+
+
+#endif /* _UAPI__ASM_OPENRISC_PTRACE_H */
--- /dev/null
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_SIGCONTEXT_H
+#define __ASM_OPENRISC_SIGCONTEXT_H
+
+#include <asm/ptrace.h>
+
+/* This struct is saved by setup_frame in signal.c, to keep the current
+ context while a signal handler is executed. It's restored by sys_sigreturn.
+*/
+
+struct sigcontext {
+ struct user_regs_struct regs; /* needs to be first */
+ unsigned long oldmask;
+};
+
+#endif /* __ASM_OPENRISC_SIGCONTEXT_H */
--- /dev/null
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#define __ARCH_HAVE_MMU
+
+#define sys_mmap2 sys_mmap_pgoff
+
+#include <asm-generic/unistd.h>
+
+#define __NR_or1k_atomic __NR_arch_specific_syscall
+__SYSCALL(__NR_or1k_atomic, sys_or1k_atomic)
EXPORT_SYMBOL(xor_blocks);
/* Set of all registered templates. */
-static struct xor_block_template *template_list;
+static struct xor_block_template *__initdata template_list;
#define BENCH_SIZE (PAGE_SIZE)
-static void
+static void __init
do_xor_speed(struct xor_block_template *tmpl, void *b1, void *b2)
{
int speed;
* As devices are only added or removed when raid_disk is < 0 and
* nr_pending is 0 and In_sync is clear, the entries we return will
* still be in the same position on the list when we re-enter
- * list_for_each_continue_rcu.
+ * list_for_each_entry_continue_rcu.
*/
- struct list_head *pos;
rcu_read_lock();
if (rdev == NULL)
/* start at the beginning */
- pos = &mddev->disks;
+ rdev = list_entry_rcu(&mddev->disks, struct md_rdev, same_set);
else {
/* release the previous rdev and start from there. */
rdev_dec_pending(rdev, mddev);
- pos = &rdev->same_set;
}
- list_for_each_continue_rcu(pos, &mddev->disks) {
- rdev = list_entry(pos, struct md_rdev, same_set);
+ list_for_each_entry_continue_rcu(rdev, &mddev->disks, same_set) {
if (rdev->raid_disk >= 0 &&
!test_bit(Faulty, &rdev->flags)) {
/* this is a usable devices */
{
bitmap_super_t *sb;
unsigned long chunksize, daemon_sleep, write_behind;
- int err = -EINVAL;
bitmap->storage.sb_page = alloc_page(GFP_KERNEL);
- if (IS_ERR(bitmap->storage.sb_page)) {
- err = PTR_ERR(bitmap->storage.sb_page);
- bitmap->storage.sb_page = NULL;
- return err;
- }
+ if (bitmap->storage.sb_page == NULL)
+ return -ENOMEM;
bitmap->storage.sb_page->index = 0;
sb = kmap_atomic(bitmap->storage.sb_page);
return 0;
}
+/*
+ * validate_rebuild_devices
+ * @rs
+ *
+ * Determine if the devices specified for rebuild can result in a valid
+ * usable array that is capable of rebuilding the given devices.
+ *
+ * Returns: 0 on success, -EINVAL on failure.
+ */
+static int validate_rebuild_devices(struct raid_set *rs)
+{
+ unsigned i, rebuild_cnt = 0;
+ unsigned rebuilds_per_group, copies, d;
+
+ if (!(rs->print_flags & DMPF_REBUILD))
+ return 0;
+
+ for (i = 0; i < rs->md.raid_disks; i++)
+ if (!test_bit(In_sync, &rs->dev[i].rdev.flags))
+ rebuild_cnt++;
+
+ switch (rs->raid_type->level) {
+ case 1:
+ if (rebuild_cnt >= rs->md.raid_disks)
+ goto too_many;
+ break;
+ case 4:
+ case 5:
+ case 6:
+ if (rebuild_cnt > rs->raid_type->parity_devs)
+ goto too_many;
+ break;
+ case 10:
+ copies = raid10_md_layout_to_copies(rs->md.layout);
+ if (rebuild_cnt < copies)
+ break;
+
+ /*
+ * It is possible to have a higher rebuild count for RAID10,
+ * as long as the failed devices occur in different mirror
+ * groups (i.e. different stripes).
+ *
+ * Right now, we only allow for "near" copies. When other
+ * formats are added, we will have to check those too.
+ *
+ * When checking "near" format, make sure no adjacent devices
+ * have failed beyond what can be handled. In addition to the
+ * simple case where the number of devices is a multiple of the
+ * number of copies, we must also handle cases where the number
+ * of devices is not a multiple of the number of copies.
+ * E.g. dev1 dev2 dev3 dev4 dev5
+ * A A B B C
+ * C D D E E
+ */
+ rebuilds_per_group = 0;
+ for (i = 0; i < rs->md.raid_disks * copies; i++) {
+ d = i % rs->md.raid_disks;
+ if (!test_bit(In_sync, &rs->dev[d].rdev.flags) &&
+ (++rebuilds_per_group >= copies))
+ goto too_many;
+ if (!((i + 1) % copies))
+ rebuilds_per_group = 0;
+ }
+ break;
+ default:
+ DMERR("The rebuild parameter is not supported for %s",
+ rs->raid_type->name);
+ rs->ti->error = "Rebuild not supported for this RAID type";
+ return -EINVAL;
+ }
+
+ return 0;
+
+too_many:
+ rs->ti->error = "Too many rebuild devices specified";
+ return -EINVAL;
+}
+
/*
* Possible arguments are...
* <chunk_size> [optional_args]
{
char *raid10_format = "near";
unsigned raid10_copies = 2;
- unsigned i, rebuild_cnt = 0;
+ unsigned i;
unsigned long value, region_size = 0;
sector_t sectors_per_dev = rs->ti->len;
sector_t max_io_len;
/* Parameters that take a numeric value are checked here */
if (!strcasecmp(key, "rebuild")) {
- rebuild_cnt++;
-
- switch (rs->raid_type->level) {
- case 1:
- if (rebuild_cnt >= rs->md.raid_disks) {
- rs->ti->error = "Too many rebuild devices specified";
- return -EINVAL;
- }
- break;
- case 4:
- case 5:
- case 6:
- if (rebuild_cnt > rs->raid_type->parity_devs) {
- rs->ti->error = "Too many rebuild devices specified for given RAID type";
- return -EINVAL;
- }
- break;
- case 10:
- default:
- DMERR("The rebuild parameter is not supported for %s", rs->raid_type->name);
- rs->ti->error = "Rebuild not supported for this RAID type";
- return -EINVAL;
- }
-
- if (value > rs->md.raid_disks) {
+ if (value >= rs->md.raid_disks) {
rs->ti->error = "Invalid rebuild index given";
return -EINVAL;
}
}
rs->md.dev_sectors = sectors_per_dev;
+ if (validate_rebuild_devices(rs))
+ return -EINVAL;
+
/* Assume there are no metadata devices until the drives are parsed */
rs->md.persistent = 0;
rs->md.external = 1;
freshest = NULL;
rdev_for_each_safe(rdev, tmp, mddev) {
+ /*
+ * Skipping super_load due to DMPF_SYNC will cause
+ * the array to undergo initialization again as
+ * though it were new. This is the intended effect
+ * of the "sync" directive.
+ *
+ * When reshaping capability is added, we must ensure
+ * that the "sync" directive is disallowed during the
+ * reshape.
+ */
+ if (rs->print_flags & DMPF_SYNC)
+ continue;
+
if (!rdev->meta_bdev)
continue;
static struct target_type raid_target = {
.name = "raid",
- .version = {1, 3, 0},
+ .version = {1, 3, 1},
.module = THIS_MODULE,
.ctr = raid_ctr,
.dtr = raid_dtr,
struct linear_conf *conf;
struct md_rdev *rdev;
int i, cnt;
+ bool discard_supported = false;
conf = kzalloc (sizeof (*conf) + raid_disks*sizeof(struct dev_info),
GFP_KERNEL);
conf->array_sectors += rdev->sectors;
cnt++;
+ if (blk_queue_discard(bdev_get_queue(rdev->bdev)))
+ discard_supported = true;
}
if (cnt != raid_disks) {
printk(KERN_ERR "md/linear:%s: not enough drives present. Aborting!\n",
goto out;
}
+ if (!discard_supported)
+ queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
+ else
+ queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
+
/*
* Here we calculate the device offsets.
*/
if (!newconf)
return -ENOMEM;
- oldconf = rcu_dereference(mddev->private);
+ oldconf = rcu_dereference_protected(mddev->private,
+ lockdep_is_held(
+ &mddev->reconfig_mutex));
mddev->raid_disks++;
rcu_assign_pointer(mddev->private, newconf);
md_set_array_sectors(mddev, linear_size(mddev, 0, 0));
static int linear_stop (struct mddev *mddev)
{
- struct linear_conf *conf = mddev->private;
+ struct linear_conf *conf =
+ rcu_dereference_protected(mddev->private,
+ lockdep_is_held(
+ &mddev->reconfig_mutex));
/*
* We do not require rcu protection here since
bio->bi_sector = bio->bi_sector - start_sector
+ tmp_dev->rdev->data_offset;
rcu_read_unlock();
+
+ if (unlikely((bio->bi_rw & REQ_DISCARD) &&
+ !blk_queue_discard(bdev_get_queue(bio->bi_bdev)))) {
+ /* Just ignore it */
+ bio_endio(bio, 0);
+ return;
+ }
+
generic_make_request(bio);
}
return NULL;
}
-static struct md_rdev * find_rdev(struct mddev * mddev, dev_t dev)
+static struct md_rdev *find_rdev_nr_rcu(struct mddev *mddev, int nr)
+{
+ struct md_rdev *rdev;
+
+ rdev_for_each_rcu(rdev, mddev)
+ if (rdev->desc_nr == nr)
+ return rdev;
+
+ return NULL;
+}
+
+static struct md_rdev *find_rdev(struct mddev *mddev, dev_t dev)
{
struct md_rdev *rdev;
return NULL;
}
+static struct md_rdev *find_rdev_rcu(struct mddev *mddev, dev_t dev)
+{
+ struct md_rdev *rdev;
+
+ rdev_for_each_rcu(rdev, mddev)
+ if (rdev->bdev->bd_dev == dev)
+ return rdev;
+
+ return NULL;
+}
+
static struct md_personality *find_pers(int level, char *clevel)
{
struct md_personality *pers;
/* Disable data integrity if non-capable/non-matching disk is being added */
void md_integrity_add_rdev(struct md_rdev *rdev, struct mddev *mddev)
{
- struct blk_integrity *bi_rdev = bdev_get_integrity(rdev->bdev);
- struct blk_integrity *bi_mddev = blk_get_integrity(mddev->gendisk);
+ struct blk_integrity *bi_rdev;
+ struct blk_integrity *bi_mddev;
+
+ if (!mddev->gendisk)
+ return;
+
+ bi_rdev = bdev_get_integrity(rdev->bdev);
+ bi_mddev = blk_get_integrity(mddev->gendisk);
if (!bi_mddev) /* nothing to do */
return;
return -EINVAL;
mddev->recovery_cp = n;
+ if (mddev->pers)
+ set_bit(MD_CHANGE_CLEAN, &mddev->flags);
return len;
}
static struct md_sysfs_entry md_resync_start =
set_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
set_bit(MD_RECOVERY_SYNC, &mddev->recovery);
}
+ if (mddev->ro == 2) {
+ /* A write to sync_action is enough to justify
+ * canceling read-auto mode
+ */
+ mddev->ro = 0;
+ md_wakeup_thread(mddev->sync_thread);
+ }
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
sysfs_notify_dirent_safe(mddev->sysfs_action);
mismatch_cnt_show(struct mddev *mddev, char *page)
{
return sprintf(page, "%llu\n",
- (unsigned long long) mddev->resync_mismatches);
+ (unsigned long long)
+ atomic64_read(&mddev->resync_mismatches));
}
static struct md_sysfs_entry md_scan_mode =
if (!test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
return sprintf(page, "none\n");
+ if (mddev->curr_resync == 1 ||
+ mddev->curr_resync == 2)
+ return sprintf(page, "delayed\n");
+
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ||
test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
max_sectors = mddev->resync_max_sectors;
mddev->new_layout = 0;
mddev->new_chunk_sectors = 0;
mddev->curr_resync = 0;
- mddev->resync_mismatches = 0;
+ atomic64_set(&mddev->resync_mismatches, 0);
mddev->suspend_lo = mddev->suspend_hi = 0;
mddev->sync_speed_min = mddev->sync_speed_max = 0;
mddev->recovery = 0;
int nr,working,insync,failed,spare;
struct md_rdev *rdev;
- nr=working=insync=failed=spare=0;
- rdev_for_each(rdev, mddev) {
+ nr = working = insync = failed = spare = 0;
+ rcu_read_lock();
+ rdev_for_each_rcu(rdev, mddev) {
nr++;
if (test_bit(Faulty, &rdev->flags))
failed++;
spare++;
}
}
+ rcu_read_unlock();
info.major_version = mddev->major_version;
info.minor_version = mddev->minor_version;
if (copy_from_user(&info, arg, sizeof(info)))
return -EFAULT;
- rdev = find_rdev_nr(mddev, info.number);
+ rcu_read_lock();
+ rdev = find_rdev_nr_rcu(mddev, info.number);
if (rdev) {
info.major = MAJOR(rdev->bdev->bd_dev);
info.minor = MINOR(rdev->bdev->bd_dev);
info.raid_disk = -1;
info.state = (1<<MD_DISK_REMOVED);
}
+ rcu_read_unlock();
if (copy_to_user(arg, &info, sizeof(info)))
return -EFAULT;
static int set_disk_faulty(struct mddev *mddev, dev_t dev)
{
struct md_rdev *rdev;
+ int err = 0;
if (mddev->pers == NULL)
return -ENODEV;
- rdev = find_rdev(mddev, dev);
+ rcu_read_lock();
+ rdev = find_rdev_rcu(mddev, dev);
if (!rdev)
- return -ENODEV;
-
- md_error(mddev, rdev);
- if (!test_bit(Faulty, &rdev->flags))
- return -EBUSY;
- return 0;
+ err = -ENODEV;
+ else {
+ md_error(mddev, rdev);
+ if (!test_bit(Faulty, &rdev->flags))
+ err = -EBUSY;
+ }
+ rcu_read_unlock();
+ return err;
}
/*
goto abort;
}
+ /* Some actions do not requires the mutex */
+ switch (cmd) {
+ case GET_ARRAY_INFO:
+ if (!mddev->raid_disks && !mddev->external)
+ err = -ENODEV;
+ else
+ err = get_array_info(mddev, argp);
+ goto abort;
+
+ case GET_DISK_INFO:
+ if (!mddev->raid_disks && !mddev->external)
+ err = -ENODEV;
+ else
+ err = get_disk_info(mddev, argp);
+ goto abort;
+
+ case SET_DISK_FAULTY:
+ err = set_disk_faulty(mddev, new_decode_dev(arg));
+ goto abort;
+ }
+
err = mddev_lock(mddev);
if (err) {
printk(KERN_INFO
*/
switch (cmd)
{
- case GET_ARRAY_INFO:
- err = get_array_info(mddev, argp);
- goto done_unlock;
-
case GET_BITMAP_FILE:
err = get_bitmap_file(mddev, argp);
goto done_unlock;
- case GET_DISK_INFO:
- err = get_disk_info(mddev, argp);
- goto done_unlock;
-
case RESTART_ARRAY_RW:
err = restart_array(mddev);
goto done_unlock;
err = hot_add_disk(mddev, new_decode_dev(arg));
goto done_unlock;
- case SET_DISK_FAULTY:
- err = set_disk_faulty(mddev, new_decode_dev(arg));
- goto done_unlock;
-
case RUN_ARRAY:
err = do_md_run(mddev);
goto done_unlock;
clear_bit(THREAD_WAKEUP, &thread->flags);
if (!kthread_should_stop())
- thread->run(thread->mddev);
+ thread->run(thread);
}
return 0;
}
}
-struct md_thread *md_register_thread(void (*run) (struct mddev *), struct mddev *mddev,
- const char *name)
+struct md_thread *md_register_thread(void (*run) (struct md_thread *),
+ struct mddev *mddev, const char *name)
{
struct md_thread *thread;
int scale;
unsigned int per_milli;
- resync = mddev->curr_resync - atomic_read(&mddev->recovery_active);
+ if (mddev->curr_resync <= 3)
+ resync = 0;
+ else
+ resync = mddev->curr_resync
+ - atomic_read(&mddev->recovery_active);
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ||
test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
if (mddev->curr_resync > 2) {
status_resync(seq, mddev);
seq_printf(seq, "\n ");
- } else if (mddev->curr_resync == 1 || mddev->curr_resync == 2)
+ } else if (mddev->curr_resync >= 1)
seq_printf(seq, "\tresync=DELAYED\n ");
else if (mddev->recovery_cp < MaxSector)
seq_printf(seq, "\tresync=PENDING\n ");
#define SYNC_MARKS 10
#define SYNC_MARK_STEP (3*HZ)
-void md_do_sync(struct mddev *mddev)
+void md_do_sync(struct md_thread *thread)
{
+ struct mddev *mddev = thread->mddev;
struct mddev *mddev2;
unsigned int currspeed = 0,
window;
* which defaults to physical size, but can be virtual size
*/
max_sectors = mddev->resync_max_sectors;
- mddev->resync_mismatches = 0;
+ atomic64_set(&mddev->resync_mismatches, 0);
/* we don't use the checkpoint if there's a bitmap */
if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery))
j = mddev->resync_min;
"md: resuming %s of %s from checkpoint.\n",
desc, mdname(mddev));
mddev->curr_resync = j;
- }
+ } else
+ mddev->curr_resync = 3; /* no longer delayed */
mddev->curr_resync_completed = j;
+ sysfs_notify(&mddev->kobj, NULL, "sync_completed");
+ md_new_event(mddev);
blk_start_plug(&plug);
while (j < max_sectors) {
break;
j += sectors;
- if (j>1) mddev->curr_resync = j;
+ if (j > 2)
+ mddev->curr_resync = j;
mddev->curr_mark_cnt = io_sectors;
if (last_check == 0)
/* this is the earliest that rebuild will be
int spares = 0;
int removed = 0;
- mddev->curr_resync_completed = 0;
-
rdev_for_each(rdev, mddev)
if (rdev->raid_disk >= 0 &&
!test_bit(Blocked, &rdev->flags) &&
/* Set RUNNING before clearing NEEDED to avoid
* any transients in the value of "sync_action".
*/
+ mddev->curr_resync_completed = 0;
set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
/* Clear some bits that don't mean anything, but
* might be left set
/* no recovery is running.
* remove any failed drives, then
* add spares if possible.
- * Spare are also removed and re-added, to allow
+ * Spares are also removed and re-added, to allow
* the personality to fail the re-add.
*/
sector_t resync_max_sectors; /* may be set by personality */
- sector_t resync_mismatches; /* count of sectors where
+ atomic64_t resync_mismatches; /* count of sectors where
* parity/replica mismatch found
*/
list_for_each_entry_rcu(rdev, &((mddev)->disks), same_set)
struct md_thread {
- void (*run) (struct mddev *mddev);
+ void (*run) (struct md_thread *thread);
struct mddev *mddev;
wait_queue_head_t wqueue;
unsigned long flags;
struct task_struct *tsk;
unsigned long timeout;
+ void *private;
};
#define THREAD_WAKEUP 0
extern int register_md_personality(struct md_personality *p);
extern int unregister_md_personality(struct md_personality *p);
extern struct md_thread *md_register_thread(
- void (*run)(struct mddev *mddev),
+ void (*run)(struct md_thread *thread),
struct mddev *mddev,
const char *name);
extern void md_unregister_thread(struct md_thread **threadp);
extern void md_super_wait(struct mddev *mddev);
extern int sync_page_io(struct md_rdev *rdev, sector_t sector, int size,
struct page *page, int rw, bool metadata_op);
-extern void md_do_sync(struct mddev *mddev);
+extern void md_do_sync(struct md_thread *thread);
extern void md_new_event(struct mddev *mddev);
extern int md_allow_write(struct mddev *mddev);
extern void md_wait_for_blocked_rdev(struct md_rdev *rdev, struct mddev *mddev);
* 3. Performs writes following reads for array syncronising.
*/
-static void multipathd (struct mddev *mddev)
+static void multipathd(struct md_thread *thread)
{
+ struct mddev *mddev = thread->mddev;
struct multipath_bh *mp_bh;
struct bio *bio;
unsigned long flags;
char b[BDEVNAME_SIZE];
char b2[BDEVNAME_SIZE];
struct r0conf *conf = kzalloc(sizeof(*conf), GFP_KERNEL);
+ bool discard_supported = false;
if (!conf)
return -ENOMEM;
if (!smallest || (rdev1->sectors < smallest->sectors))
smallest = rdev1;
cnt++;
+
+ if (blk_queue_discard(bdev_get_queue(rdev1->bdev)))
+ discard_supported = true;
}
if (cnt != mddev->raid_disks) {
printk(KERN_ERR "md/raid0:%s: too few disks (%d of %d) - "
blk_queue_io_opt(mddev->queue,
(mddev->chunk_sectors << 9) * mddev->raid_disks);
+ if (!discard_supported)
+ queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
+ else
+ queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
+
pr_debug("md/raid0:%s: done.\n", mdname(mddev));
*private_conf = conf;
return -EINVAL;
blk_queue_max_hw_sectors(mddev->queue, mddev->chunk_sectors);
blk_queue_max_write_same_sectors(mddev->queue, mddev->chunk_sectors);
+ blk_queue_max_discard_sectors(mddev->queue, mddev->chunk_sectors);
/* if private is not null, we are here after takeover */
if (mddev->private == NULL) {
sector_t sector = bio->bi_sector;
struct bio_pair *bp;
/* Sanity check -- queue functions should prevent this happening */
- if (bio->bi_vcnt != 1 ||
+ if ((bio->bi_vcnt != 1 && bio->bi_vcnt != 0) ||
bio->bi_idx != 0)
goto bad_map;
/* This is a one page bio that upper layers
bio->bi_sector = sector_offset + zone->dev_start +
tmp_dev->data_offset;
+ if (unlikely((bio->bi_rw & REQ_DISCARD) &&
+ !blk_queue_discard(bdev_get_queue(bio->bi_bdev)))) {
+ /* Just ignore it */
+ bio_endio(bio, 0);
+ return;
+ }
+
generic_make_request(bio);
return;
spin_unlock_irqrestore(&conf->device_lock, flags);
}
- if (uptodate)
+ if (uptodate) {
raid_end_bio_io(r1_bio);
- else {
+ rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev);
+ } else {
/*
* oops, read error:
*/
(unsigned long long)r1_bio->sector);
set_bit(R1BIO_ReadError, &r1_bio->state);
reschedule_retry(r1_bio);
+ /* don't drop the reference on read_disk yet */
}
-
- rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev);
}
static void close_write(struct r1bio *r1_bio)
while (bio) { /* submit pending writes */
struct bio *next = bio->bi_next;
bio->bi_next = NULL;
- generic_make_request(bio);
+ if (unlikely((bio->bi_rw & REQ_DISCARD) &&
+ !blk_queue_discard(bdev_get_queue(bio->bi_bdev))))
+ /* Just ignore it */
+ bio_endio(bio, 0);
+ else
+ generic_make_request(bio);
bio = next;
}
} else
const int rw = bio_data_dir(bio);
const unsigned long do_sync = (bio->bi_rw & REQ_SYNC);
const unsigned long do_flush_fua = (bio->bi_rw & (REQ_FLUSH | REQ_FUA));
+ const unsigned long do_discard = (bio->bi_rw
+ & (REQ_DISCARD | REQ_SECURE));
struct md_rdev *blocked_rdev;
struct blk_plug_cb *cb;
struct raid1_plug_cb *plug = NULL;
conf->mirrors[i].rdev->data_offset);
mbio->bi_bdev = conf->mirrors[i].rdev->bdev;
mbio->bi_end_io = raid1_end_write_request;
- mbio->bi_rw = WRITE | do_flush_fua | do_sync;
+ mbio->bi_rw = WRITE | do_flush_fua | do_sync | do_discard;
mbio->bi_private = r1_bio;
atomic_inc(&r1_bio->remaining);
clear_bit(Unmerged, &rdev->flags);
}
md_integrity_add_rdev(rdev, mddev);
+ if (blk_queue_discard(bdev_get_queue(rdev->bdev)))
+ queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
print_conf(conf);
return err;
}
} else
j = 0;
if (j >= 0)
- mddev->resync_mismatches += r1_bio->sectors;
+ atomic64_add(r1_bio->sectors, &mddev->resync_mismatches);
if (j < 0 || (test_bit(MD_RECOVERY_CHECK, &mddev->recovery)
&& test_bit(BIO_UPTODATE, &sbio->bi_flags))) {
/* No need to write to this device. */
unfreeze_array(conf);
} else
md_error(mddev, conf->mirrors[r1_bio->read_disk].rdev);
+ rdev_dec_pending(conf->mirrors[r1_bio->read_disk].rdev, conf->mddev);
bio = r1_bio->bios[r1_bio->read_disk];
bdevname(bio->bi_bdev, b);
}
}
-static void raid1d(struct mddev *mddev)
+static void raid1d(struct md_thread *thread)
{
+ struct mddev *mddev = thread->mddev;
struct r1bio *r1_bio;
unsigned long flags;
struct r1conf *conf = mddev->private;
int i;
struct md_rdev *rdev;
int ret;
+ bool discard_supported = false;
if (mddev->level != 1) {
printk(KERN_ERR "md/raid1:%s: raid level not set to mirroring (%d)\n",
continue;
disk_stack_limits(mddev->gendisk, rdev->bdev,
rdev->data_offset << 9);
+ if (blk_queue_discard(bdev_get_queue(rdev->bdev)))
+ discard_supported = true;
}
mddev->degraded = 0;
mddev->queue->backing_dev_info.congested_fn = raid1_congested;
mddev->queue->backing_dev_info.congested_data = mddev;
blk_queue_merge_bvec(mddev->queue, raid1_mergeable_bvec);
+
+ if (discard_supported)
+ queue_flag_set_unlocked(QUEUE_FLAG_DISCARD,
+ mddev->queue);
+ else
+ queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD,
+ mddev->queue);
}
ret = md_integrity_register(mddev);
while (bio) { /* submit pending writes */
struct bio *next = bio->bi_next;
bio->bi_next = NULL;
- generic_make_request(bio);
+ if (unlikely((bio->bi_rw & REQ_DISCARD) &&
+ !blk_queue_discard(bdev_get_queue(bio->bi_bdev))))
+ /* Just ignore it */
+ bio_endio(bio, 0);
+ else
+ generic_make_request(bio);
bio = next;
}
} else
return rdev->new_data_offset;
}
+struct raid10_plug_cb {
+ struct blk_plug_cb cb;
+ struct bio_list pending;
+ int pending_cnt;
+};
+
+static void raid10_unplug(struct blk_plug_cb *cb, bool from_schedule)
+{
+ struct raid10_plug_cb *plug = container_of(cb, struct raid10_plug_cb,
+ cb);
+ struct mddev *mddev = plug->cb.data;
+ struct r10conf *conf = mddev->private;
+ struct bio *bio;
+
+ if (from_schedule) {
+ spin_lock_irq(&conf->device_lock);
+ bio_list_merge(&conf->pending_bio_list, &plug->pending);
+ conf->pending_count += plug->pending_cnt;
+ spin_unlock_irq(&conf->device_lock);
+ md_wakeup_thread(mddev->thread);
+ kfree(plug);
+ return;
+ }
+
+ /* we aren't scheduling, so we can do the write-out directly. */
+ bio = bio_list_get(&plug->pending);
+ bitmap_unplug(mddev->bitmap);
+ wake_up(&conf->wait_barrier);
+
+ while (bio) { /* submit pending writes */
+ struct bio *next = bio->bi_next;
+ bio->bi_next = NULL;
+ generic_make_request(bio);
+ bio = next;
+ }
+ kfree(plug);
+}
+
static void make_request(struct mddev *mddev, struct bio * bio)
{
struct r10conf *conf = mddev->private;
const int rw = bio_data_dir(bio);
const unsigned long do_sync = (bio->bi_rw & REQ_SYNC);
const unsigned long do_fua = (bio->bi_rw & REQ_FUA);
+ const unsigned long do_discard = (bio->bi_rw
+ & (REQ_DISCARD | REQ_SECURE));
unsigned long flags;
struct md_rdev *blocked_rdev;
+ struct blk_plug_cb *cb;
+ struct raid10_plug_cb *plug = NULL;
int sectors_handled;
int max_sectors;
int sectors;
|| conf->prev.near_copies < conf->prev.raid_disks))) {
struct bio_pair *bp;
/* Sanity check -- queue functions should prevent this happening */
- if (bio->bi_vcnt != 1 ||
+ if ((bio->bi_vcnt != 1 && bio->bi_vcnt != 0) ||
bio->bi_idx != 0)
goto bad_map;
/* This is a one page bio that upper layers
conf->mirrors[d].rdev));
mbio->bi_bdev = conf->mirrors[d].rdev->bdev;
mbio->bi_end_io = raid10_end_write_request;
- mbio->bi_rw = WRITE | do_sync | do_fua;
+ mbio->bi_rw = WRITE | do_sync | do_fua | do_discard;
mbio->bi_private = r10_bio;
atomic_inc(&r10_bio->remaining);
+
+ cb = blk_check_plugged(raid10_unplug, mddev, sizeof(*plug));
+ if (cb)
+ plug = container_of(cb, struct raid10_plug_cb, cb);
+ else
+ plug = NULL;
spin_lock_irqsave(&conf->device_lock, flags);
- bio_list_add(&conf->pending_bio_list, mbio);
- conf->pending_count++;
+ if (plug) {
+ bio_list_add(&plug->pending, mbio);
+ plug->pending_cnt++;
+ } else {
+ bio_list_add(&conf->pending_bio_list, mbio);
+ conf->pending_count++;
+ }
spin_unlock_irqrestore(&conf->device_lock, flags);
- if (!mddev_check_plugged(mddev))
+ if (!plug)
md_wakeup_thread(mddev->thread);
if (!r10_bio->devs[i].repl_bio)
conf->mirrors[d].replacement));
mbio->bi_bdev = conf->mirrors[d].replacement->bdev;
mbio->bi_end_io = raid10_end_write_request;
- mbio->bi_rw = WRITE | do_sync | do_fua;
+ mbio->bi_rw = WRITE | do_sync | do_fua | do_discard;
mbio->bi_private = r10_bio;
atomic_inc(&r10_bio->remaining);
&& !test_bit(Faulty, &tmp->rdev->flags)
&& !test_and_set_bit(In_sync, &tmp->rdev->flags)) {
count++;
- sysfs_notify_dirent(tmp->rdev->sysfs_state);
+ sysfs_notify_dirent_safe(tmp->rdev->sysfs_state);
}
}
spin_lock_irqsave(&conf->device_lock, flags);
clear_bit(Unmerged, &rdev->flags);
}
md_integrity_add_rdev(rdev, mddev);
+ if (blk_queue_discard(bdev_get_queue(rdev->bdev)))
+ queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
+
print_conf(conf);
return err;
}
break;
if (j == vcnt)
continue;
- mddev->resync_mismatches += r10_bio->sectors;
+ atomic64_add(r10_bio->sectors, &mddev->resync_mismatches);
if (test_bit(MD_RECOVERY_CHECK, &mddev->recovery))
/* Don't fix anything. */
continue;
}
}
-static void raid10d(struct mddev *mddev)
+static void raid10d(struct md_thread *thread)
{
+ struct mddev *mddev = thread->mddev;
struct r10bio *r10_bio;
unsigned long flags;
struct r10conf *conf = mddev->private;
else {
bad_sectors -= (sector - first_bad);
if (max_sync > bad_sectors)
- max_sync = max_sync;
+ max_sync = bad_sectors;
continue;
}
}
sector_t size;
sector_t min_offset_diff = 0;
int first = 1;
+ bool discard_supported = false;
if (mddev->private == NULL) {
conf = setup_conf(mddev);
chunk_size = mddev->chunk_sectors << 9;
if (mddev->queue) {
+ blk_queue_max_discard_sectors(mddev->queue,
+ mddev->chunk_sectors);
blk_queue_io_min(mddev->queue, chunk_size);
if (conf->geo.raid_disks % conf->geo.near_copies)
blk_queue_io_opt(mddev->queue, chunk_size * conf->geo.raid_disks);
rdev->data_offset << 9);
disk->head_position = 0;
+
+ if (blk_queue_discard(bdev_get_queue(rdev->bdev)))
+ discard_supported = true;
}
+ if (discard_supported)
+ queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
+ else
+ queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
+
/* need to check that every block has at least one working mirror */
if (!enough(conf, -1)) {
printk(KERN_ERR "md/raid10:%s: not enough operational mirrors.\n",
rw = WRITE_FUA;
else
rw = WRITE;
+ if (test_bit(R5_Discard, &sh->dev[i].flags))
+ rw |= REQ_DISCARD;
} else if (test_and_clear_bit(R5_Wantread, &sh->dev[i].flags))
rw = READ;
else if (test_and_clear_bit(R5_WantReplace,
set_bit(R5_WantFUA, &dev->flags);
if (wbi->bi_rw & REQ_SYNC)
set_bit(R5_SyncIO, &dev->flags);
- tx = async_copy_data(1, wbi, dev->page,
- dev->sector, tx);
+ if (wbi->bi_rw & REQ_DISCARD)
+ set_bit(R5_Discard, &dev->flags);
+ else
+ tx = async_copy_data(1, wbi, dev->page,
+ dev->sector, tx);
wbi = r5_next_bio(wbi, dev->sector);
}
}
int pd_idx = sh->pd_idx;
int qd_idx = sh->qd_idx;
int i;
- bool fua = false, sync = false;
+ bool fua = false, sync = false, discard = false;
pr_debug("%s: stripe %llu\n", __func__,
(unsigned long long)sh->sector);
for (i = disks; i--; ) {
fua |= test_bit(R5_WantFUA, &sh->dev[i].flags);
sync |= test_bit(R5_SyncIO, &sh->dev[i].flags);
+ discard |= test_bit(R5_Discard, &sh->dev[i].flags);
}
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
if (dev->written || i == pd_idx || i == qd_idx) {
- set_bit(R5_UPTODATE, &dev->flags);
+ if (!discard)
+ set_bit(R5_UPTODATE, &dev->flags);
if (fua)
set_bit(R5_WantFUA, &dev->flags);
if (sync)
pr_debug("%s: stripe %llu\n", __func__,
(unsigned long long)sh->sector);
+ for (i = 0; i < sh->disks; i++) {
+ if (pd_idx == i)
+ continue;
+ if (!test_bit(R5_Discard, &sh->dev[i].flags))
+ break;
+ }
+ if (i >= sh->disks) {
+ atomic_inc(&sh->count);
+ set_bit(R5_Discard, &sh->dev[pd_idx].flags);
+ ops_complete_reconstruct(sh);
+ return;
+ }
/* check if prexor is active which means only process blocks
* that are part of a read-modify-write (written)
*/
{
struct async_submit_ctl submit;
struct page **blocks = percpu->scribble;
- int count;
+ int count, i;
pr_debug("%s: stripe %llu\n", __func__, (unsigned long long)sh->sector);
+ for (i = 0; i < sh->disks; i++) {
+ if (sh->pd_idx == i || sh->qd_idx == i)
+ continue;
+ if (!test_bit(R5_Discard, &sh->dev[i].flags))
+ break;
+ }
+ if (i >= sh->disks) {
+ atomic_inc(&sh->count);
+ set_bit(R5_Discard, &sh->dev[sh->pd_idx].flags);
+ set_bit(R5_Discard, &sh->dev[sh->qd_idx].flags);
+ ops_complete_reconstruct(sh);
+ return;
+ }
+
count = set_syndrome_sources(blocks, sh);
atomic_inc(&sh->count);
if (sector >= sh->dev[dd_idx].sector + STRIPE_SECTORS)
set_bit(R5_OVERWRITE, &sh->dev[dd_idx].flags);
}
- spin_unlock_irq(&sh->stripe_lock);
pr_debug("added bi b#%llu to stripe s#%llu, disk %d.\n",
(unsigned long long)(*bip)->bi_sector,
(unsigned long long)sh->sector, dd_idx);
+ spin_unlock_irq(&sh->stripe_lock);
if (conf->mddev->bitmap && firstwrite) {
bitmap_startwrite(conf->mddev->bitmap, sh->sector,
bi = sh->dev[i].towrite;
sh->dev[i].towrite = NULL;
spin_unlock_irq(&sh->stripe_lock);
- if (bi) {
- s->to_write--;
+ if (bi)
bitmap_end = 1;
- }
if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
wake_up(&conf->wait_for_overlap);
if (!test_bit(R5_Wantfill, &sh->dev[i].flags) &&
(!test_bit(R5_Insync, &sh->dev[i].flags) ||
test_bit(R5_ReadError, &sh->dev[i].flags))) {
+ spin_lock_irq(&sh->stripe_lock);
bi = sh->dev[i].toread;
sh->dev[i].toread = NULL;
+ spin_unlock_irq(&sh->stripe_lock);
if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
wake_up(&conf->wait_for_overlap);
- if (bi) s->to_read--;
while (bi && bi->bi_sector <
sh->dev[i].sector + STRIPE_SECTORS) {
struct bio *nextbi =
if (sh->dev[i].written) {
dev = &sh->dev[i];
if (!test_bit(R5_LOCKED, &dev->flags) &&
- test_bit(R5_UPTODATE, &dev->flags)) {
+ (test_bit(R5_UPTODATE, &dev->flags) ||
+ test_and_clear_bit(R5_Discard, &dev->flags))) {
/* We can return any write requests */
struct bio *wbi, *wbi2;
pr_debug("Return write for disc %d\n", i);
int disks)
{
int rmw = 0, rcw = 0, i;
- if (conf->max_degraded == 2) {
- /* RAID6 requires 'rcw' in current implementation
- * Calculate the real rcw later - for now fake it
+ sector_t recovery_cp = conf->mddev->recovery_cp;
+
+ /* RAID6 requires 'rcw' in current implementation.
+ * Otherwise, check whether resync is now happening or should start.
+ * If yes, then the array is dirty (after unclean shutdown or
+ * initial creation), so parity in some stripes might be inconsistent.
+ * In this case, we need to always do reconstruct-write, to ensure
+ * that in case of drive failure or read-error correction, we
+ * generate correct data from the parity.
+ */
+ if (conf->max_degraded == 2 ||
+ (recovery_cp < MaxSector && sh->sector >= recovery_cp)) {
+ /* Calculate the real rcw later - for now make it
* look like rcw is cheaper
*/
rcw = 1; rmw = 2;
+ pr_debug("force RCW max_degraded=%u, recovery_cp=%llu sh->sector=%llu\n",
+ conf->max_degraded, (unsigned long long)recovery_cp,
+ (unsigned long long)sh->sector);
} else for (i = disks; i--; ) {
/* would I have to read this buffer for read_modify_write */
struct r5dev *dev = &sh->dev[i];
*/
set_bit(STRIPE_INSYNC, &sh->state);
else {
- conf->mddev->resync_mismatches += STRIPE_SECTORS;
+ atomic64_add(STRIPE_SECTORS, &conf->mddev->resync_mismatches);
if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery))
/* don't try to repair!! */
set_bit(STRIPE_INSYNC, &sh->state);
*/
}
} else {
- conf->mddev->resync_mismatches += STRIPE_SECTORS;
+ atomic64_add(STRIPE_SECTORS, &conf->mddev->resync_mismatches);
if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery))
/* don't try to repair!! */
set_bit(STRIPE_INSYNC, &sh->state);
if (s.written &&
(s.p_failed || ((test_bit(R5_Insync, &pdev->flags)
&& !test_bit(R5_LOCKED, &pdev->flags)
- && test_bit(R5_UPTODATE, &pdev->flags)))) &&
+ && (test_bit(R5_UPTODATE, &pdev->flags) ||
+ test_bit(R5_Discard, &pdev->flags))))) &&
(s.q_failed || ((test_bit(R5_Insync, &qdev->flags)
&& !test_bit(R5_LOCKED, &qdev->flags)
- && test_bit(R5_UPTODATE, &qdev->flags)))))
+ && (test_bit(R5_UPTODATE, &qdev->flags) ||
+ test_bit(R5_Discard, &qdev->flags))))))
handle_stripe_clean_event(conf, sh, disks, &s.return_bi);
/* Now we might consider reading some blocks, either to check/generate
/* All the 'written' buffers and the parity block are ready to
* be written back to disk
*/
- BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags));
+ BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags) &&
+ !test_bit(R5_Discard, &sh->dev[sh->pd_idx].flags));
BUG_ON(sh->qd_idx >= 0 &&
- !test_bit(R5_UPTODATE, &sh->dev[sh->qd_idx].flags));
+ !test_bit(R5_UPTODATE, &sh->dev[sh->qd_idx].flags) &&
+ !test_bit(R5_Discard, &sh->dev[sh->qd_idx].flags));
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
if (test_bit(R5_LOCKED, &dev->flags) &&
release_stripe(sh);
}
+static void make_discard_request(struct mddev *mddev, struct bio *bi)
+{
+ struct r5conf *conf = mddev->private;
+ sector_t logical_sector, last_sector;
+ struct stripe_head *sh;
+ int remaining;
+ int stripe_sectors;
+
+ if (mddev->reshape_position != MaxSector)
+ /* Skip discard while reshape is happening */
+ return;
+
+ logical_sector = bi->bi_sector & ~((sector_t)STRIPE_SECTORS-1);
+ last_sector = bi->bi_sector + (bi->bi_size>>9);
+
+ bi->bi_next = NULL;
+ bi->bi_phys_segments = 1; /* over-loaded to count active stripes */
+
+ stripe_sectors = conf->chunk_sectors *
+ (conf->raid_disks - conf->max_degraded);
+ logical_sector = DIV_ROUND_UP_SECTOR_T(logical_sector,
+ stripe_sectors);
+ sector_div(last_sector, stripe_sectors);
+
+ logical_sector *= conf->chunk_sectors;
+ last_sector *= conf->chunk_sectors;
+
+ for (; logical_sector < last_sector;
+ logical_sector += STRIPE_SECTORS) {
+ DEFINE_WAIT(w);
+ int d;
+ again:
+ sh = get_active_stripe(conf, logical_sector, 0, 0, 0);
+ prepare_to_wait(&conf->wait_for_overlap, &w,
+ TASK_UNINTERRUPTIBLE);
+ spin_lock_irq(&sh->stripe_lock);
+ for (d = 0; d < conf->raid_disks; d++) {
+ if (d == sh->pd_idx || d == sh->qd_idx)
+ continue;
+ if (sh->dev[d].towrite || sh->dev[d].toread) {
+ set_bit(R5_Overlap, &sh->dev[d].flags);
+ spin_unlock_irq(&sh->stripe_lock);
+ release_stripe(sh);
+ schedule();
+ goto again;
+ }
+ }
+ finish_wait(&conf->wait_for_overlap, &w);
+ for (d = 0; d < conf->raid_disks; d++) {
+ if (d == sh->pd_idx || d == sh->qd_idx)
+ continue;
+ sh->dev[d].towrite = bi;
+ set_bit(R5_OVERWRITE, &sh->dev[d].flags);
+ raid5_inc_bi_active_stripes(bi);
+ }
+ spin_unlock_irq(&sh->stripe_lock);
+ if (conf->mddev->bitmap) {
+ for (d = 0;
+ d < conf->raid_disks - conf->max_degraded;
+ d++)
+ bitmap_startwrite(mddev->bitmap,
+ sh->sector,
+ STRIPE_SECTORS,
+ 0);
+ sh->bm_seq = conf->seq_flush + 1;
+ set_bit(STRIPE_BIT_DELAY, &sh->state);
+ }
+
+ set_bit(STRIPE_HANDLE, &sh->state);
+ clear_bit(STRIPE_DELAYED, &sh->state);
+ if (!test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
+ atomic_inc(&conf->preread_active_stripes);
+ release_stripe_plug(mddev, sh);
+ }
+
+ remaining = raid5_dec_bi_active_stripes(bi);
+ if (remaining == 0) {
+ md_write_end(mddev);
+ bio_endio(bi, 0);
+ }
+}
+
static void make_request(struct mddev *mddev, struct bio * bi)
{
struct r5conf *conf = mddev->private;
chunk_aligned_read(mddev,bi))
return;
+ if (unlikely(bi->bi_rw & REQ_DISCARD)) {
+ make_discard_request(mddev, bi);
+ return;
+ }
+
logical_sector = bi->bi_sector & ~((sector_t)STRIPE_SECTORS-1);
last_sector = bi->bi_sector + (bi->bi_size>>9);
bi->bi_next = NULL;
* During the scan, completed stripes are saved for us by the interrupt
* handler, so that they will not have to wait for our next wakeup.
*/
-static void raid5d(struct mddev *mddev)
+static void raid5d(struct md_thread *thread)
{
+ struct mddev *mddev = thread->mddev;
struct r5conf *conf = mddev->private;
int handled;
struct blk_plug plug;
if (mddev->queue) {
int chunk_size;
+ bool discard_supported = true;
/* read-ahead size must cover two whole stripes, which
* is 2 * (datadisks) * chunksize where 'n' is the
* number of raid devices
blk_queue_io_min(mddev->queue, chunk_size);
blk_queue_io_opt(mddev->queue, chunk_size *
(conf->raid_disks - conf->max_degraded));
+ /*
+ * We can only discard a whole stripe. It doesn't make sense to
+ * discard data disk but write parity disk
+ */
+ stripe = stripe * PAGE_SIZE;
+ mddev->queue->limits.discard_alignment = stripe;
+ mddev->queue->limits.discard_granularity = stripe;
+ /*
+ * unaligned part of discard request will be ignored, so can't
+ * guarantee discard_zerors_data
+ */
+ mddev->queue->limits.discard_zeroes_data = 0;
rdev_for_each(rdev, mddev) {
disk_stack_limits(mddev->gendisk, rdev->bdev,
rdev->data_offset << 9);
disk_stack_limits(mddev->gendisk, rdev->bdev,
rdev->new_data_offset << 9);
+ /*
+ * discard_zeroes_data is required, otherwise data
+ * could be lost. Consider a scenario: discard a stripe
+ * (the stripe could be inconsistent if
+ * discard_zeroes_data is 0); write one disk of the
+ * stripe (the stripe could be inconsistent again
+ * depending on which disks are used to calculate
+ * parity); the disk is broken; The stripe data of this
+ * disk is lost.
+ */
+ if (!blk_queue_discard(bdev_get_queue(rdev->bdev)) ||
+ !bdev_get_queue(rdev->bdev)->
+ limits.discard_zeroes_data)
+ discard_supported = false;
}
+
+ if (discard_supported &&
+ mddev->queue->limits.max_discard_sectors >= stripe &&
+ mddev->queue->limits.discard_granularity >= stripe)
+ queue_flag_set_unlocked(QUEUE_FLAG_DISCARD,
+ mddev->queue);
+ else
+ queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD,
+ mddev->queue);
}
return 0;
if (!check_stripe_cache(mddev))
return -ENOSPC;
- return resize_stripes(conf, conf->raid_disks + mddev->delta_disks);
+ return resize_stripes(conf, (conf->previous_raid_disks
+ + mddev->delta_disks));
}
static int raid5_start_reshape(struct mddev *mddev)
R5_WantReplace, /* We need to update the replacement, we have read
* data in, and now is a good time to write it out.
*/
+ R5_Discard, /* Discard the stripe */
};
/*
struct btrfs_inode_item *item,
struct inode *inode, int log_inode_only)
{
- btrfs_set_inode_uid(leaf, item, inode->i_uid);
- btrfs_set_inode_gid(leaf, item, inode->i_gid);
+ btrfs_set_inode_uid(leaf, item, i_uid_read(inode));
+ btrfs_set_inode_gid(leaf, item, i_gid_read(inode));
btrfs_set_inode_mode(leaf, item, inode->i_mode);
btrfs_set_inode_nlink(leaf, item, inode->i_nlink);
break;
case ACL_GROUP:
gid = make_kgid(from, le32_to_cpu(entry->e_id));
- entry->e_id = cpu_to_le32(from_kuid(to, uid));
+ entry->e_id = cpu_to_le32(from_kgid(to, gid));
break;
default:
break;
+++ /dev/null
-/*
- * include/linux/spi/spidev.h
- *
- * Copyright (C) 2006 SWAPP
- * Andrea Paterniani <a.paterniani@swapp-eng.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef SPIDEV_H
-#define SPIDEV_H
-
-#include <linux/types.h>
-
-/* User space versions of kernel symbols for SPI clocking modes,
- * matching <linux/spi/spi.h>
- */
-
-#define SPI_CPHA 0x01
-#define SPI_CPOL 0x02
-
-#define SPI_MODE_0 (0|0)
-#define SPI_MODE_1 (0|SPI_CPHA)
-#define SPI_MODE_2 (SPI_CPOL|0)
-#define SPI_MODE_3 (SPI_CPOL|SPI_CPHA)
-
-#define SPI_CS_HIGH 0x04
-#define SPI_LSB_FIRST 0x08
-#define SPI_3WIRE 0x10
-#define SPI_LOOP 0x20
-#define SPI_NO_CS 0x40
-#define SPI_READY 0x80
-
-/*---------------------------------------------------------------------------*/
-
-/* IOCTL commands */
-
-#define SPI_IOC_MAGIC 'k'
-
-/**
- * struct spi_ioc_transfer - describes a single SPI transfer
- * @tx_buf: Holds pointer to userspace buffer with transmit data, or null.
- * If no data is provided, zeroes are shifted out.
- * @rx_buf: Holds pointer to userspace buffer for receive data, or null.
- * @len: Length of tx and rx buffers, in bytes.
- * @speed_hz: Temporary override of the device's bitrate.
- * @bits_per_word: Temporary override of the device's wordsize.
- * @delay_usecs: If nonzero, how long to delay after the last bit transfer
- * before optionally deselecting the device before the next transfer.
- * @cs_change: True to deselect device before starting the next transfer.
- *
- * This structure is mapped directly to the kernel spi_transfer structure;
- * the fields have the same meanings, except of course that the pointers
- * are in a different address space (and may be of different sizes in some
- * cases, such as 32-bit i386 userspace over a 64-bit x86_64 kernel).
- * Zero-initialize the structure, including currently unused fields, to
- * accommodate potential future updates.
- *
- * SPI_IOC_MESSAGE gives userspace the equivalent of kernel spi_sync().
- * Pass it an array of related transfers, they'll execute together.
- * Each transfer may be half duplex (either direction) or full duplex.
- *
- * struct spi_ioc_transfer mesg[4];
- * ...
- * status = ioctl(fd, SPI_IOC_MESSAGE(4), mesg);
- *
- * So for example one transfer might send a nine bit command (right aligned
- * in a 16-bit word), the next could read a block of 8-bit data before
- * terminating that command by temporarily deselecting the chip; the next
- * could send a different nine bit command (re-selecting the chip), and the
- * last transfer might write some register values.
- */
-struct spi_ioc_transfer {
- __u64 tx_buf;
- __u64 rx_buf;
-
- __u32 len;
- __u32 speed_hz;
-
- __u16 delay_usecs;
- __u8 bits_per_word;
- __u8 cs_change;
- __u32 pad;
-
- /* If the contents of 'struct spi_ioc_transfer' ever change
- * incompatibly, then the ioctl number (currently 0) must change;
- * ioctls with constant size fields get a bit more in the way of
- * error checking than ones (like this) where that field varies.
- *
- * NOTE: struct layout is the same in 64bit and 32bit userspace.
- */
-};
-
-/* not all platforms use <asm-generic/ioctl.h> or _IOC_TYPECHECK() ... */
-#define SPI_MSGSIZE(N) \
- ((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << _IOC_SIZEBITS)) \
- ? ((N)*(sizeof (struct spi_ioc_transfer))) : 0)
-#define SPI_IOC_MESSAGE(N) _IOW(SPI_IOC_MAGIC, 0, char[SPI_MSGSIZE(N)])
-
-
-/* Read / Write of SPI mode (SPI_MODE_0..SPI_MODE_3) */
-#define SPI_IOC_RD_MODE _IOR(SPI_IOC_MAGIC, 1, __u8)
-#define SPI_IOC_WR_MODE _IOW(SPI_IOC_MAGIC, 1, __u8)
-
-/* Read / Write SPI bit justification */
-#define SPI_IOC_RD_LSB_FIRST _IOR(SPI_IOC_MAGIC, 2, __u8)
-#define SPI_IOC_WR_LSB_FIRST _IOW(SPI_IOC_MAGIC, 2, __u8)
-
-/* Read / Write SPI device word length (1..N) */
-#define SPI_IOC_RD_BITS_PER_WORD _IOR(SPI_IOC_MAGIC, 3, __u8)
-#define SPI_IOC_WR_BITS_PER_WORD _IOW(SPI_IOC_MAGIC, 3, __u8)
-
-/* Read / Write SPI device default max speed hz */
-#define SPI_IOC_RD_MAX_SPEED_HZ _IOR(SPI_IOC_MAGIC, 4, __u32)
-#define SPI_IOC_WR_MAX_SPEED_HZ _IOW(SPI_IOC_MAGIC, 4, __u32)
-
-
-
-#endif /* SPIDEV_H */
# UAPI Header export list
+header-y += spidev.h
--- /dev/null
+/*
+ * include/linux/spi/spidev.h
+ *
+ * Copyright (C) 2006 SWAPP
+ * Andrea Paterniani <a.paterniani@swapp-eng.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef SPIDEV_H
+#define SPIDEV_H
+
+#include <linux/types.h>
+
+/* User space versions of kernel symbols for SPI clocking modes,
+ * matching <linux/spi/spi.h>
+ */
+
+#define SPI_CPHA 0x01
+#define SPI_CPOL 0x02
+
+#define SPI_MODE_0 (0|0)
+#define SPI_MODE_1 (0|SPI_CPHA)
+#define SPI_MODE_2 (SPI_CPOL|0)
+#define SPI_MODE_3 (SPI_CPOL|SPI_CPHA)
+
+#define SPI_CS_HIGH 0x04
+#define SPI_LSB_FIRST 0x08
+#define SPI_3WIRE 0x10
+#define SPI_LOOP 0x20
+#define SPI_NO_CS 0x40
+#define SPI_READY 0x80
+
+/*---------------------------------------------------------------------------*/
+
+/* IOCTL commands */
+
+#define SPI_IOC_MAGIC 'k'
+
+/**
+ * struct spi_ioc_transfer - describes a single SPI transfer
+ * @tx_buf: Holds pointer to userspace buffer with transmit data, or null.
+ * If no data is provided, zeroes are shifted out.
+ * @rx_buf: Holds pointer to userspace buffer for receive data, or null.
+ * @len: Length of tx and rx buffers, in bytes.
+ * @speed_hz: Temporary override of the device's bitrate.
+ * @bits_per_word: Temporary override of the device's wordsize.
+ * @delay_usecs: If nonzero, how long to delay after the last bit transfer
+ * before optionally deselecting the device before the next transfer.
+ * @cs_change: True to deselect device before starting the next transfer.
+ *
+ * This structure is mapped directly to the kernel spi_transfer structure;
+ * the fields have the same meanings, except of course that the pointers
+ * are in a different address space (and may be of different sizes in some
+ * cases, such as 32-bit i386 userspace over a 64-bit x86_64 kernel).
+ * Zero-initialize the structure, including currently unused fields, to
+ * accommodate potential future updates.
+ *
+ * SPI_IOC_MESSAGE gives userspace the equivalent of kernel spi_sync().
+ * Pass it an array of related transfers, they'll execute together.
+ * Each transfer may be half duplex (either direction) or full duplex.
+ *
+ * struct spi_ioc_transfer mesg[4];
+ * ...
+ * status = ioctl(fd, SPI_IOC_MESSAGE(4), mesg);
+ *
+ * So for example one transfer might send a nine bit command (right aligned
+ * in a 16-bit word), the next could read a block of 8-bit data before
+ * terminating that command by temporarily deselecting the chip; the next
+ * could send a different nine bit command (re-selecting the chip), and the
+ * last transfer might write some register values.
+ */
+struct spi_ioc_transfer {
+ __u64 tx_buf;
+ __u64 rx_buf;
+
+ __u32 len;
+ __u32 speed_hz;
+
+ __u16 delay_usecs;
+ __u8 bits_per_word;
+ __u8 cs_change;
+ __u32 pad;
+
+ /* If the contents of 'struct spi_ioc_transfer' ever change
+ * incompatibly, then the ioctl number (currently 0) must change;
+ * ioctls with constant size fields get a bit more in the way of
+ * error checking than ones (like this) where that field varies.
+ *
+ * NOTE: struct layout is the same in 64bit and 32bit userspace.
+ */
+};
+
+/* not all platforms use <asm-generic/ioctl.h> or _IOC_TYPECHECK() ... */
+#define SPI_MSGSIZE(N) \
+ ((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << _IOC_SIZEBITS)) \
+ ? ((N)*(sizeof (struct spi_ioc_transfer))) : 0)
+#define SPI_IOC_MESSAGE(N) _IOW(SPI_IOC_MAGIC, 0, char[SPI_MSGSIZE(N)])
+
+
+/* Read / Write of SPI mode (SPI_MODE_0..SPI_MODE_3) */
+#define SPI_IOC_RD_MODE _IOR(SPI_IOC_MAGIC, 1, __u8)
+#define SPI_IOC_WR_MODE _IOW(SPI_IOC_MAGIC, 1, __u8)
+
+/* Read / Write SPI bit justification */
+#define SPI_IOC_RD_LSB_FIRST _IOR(SPI_IOC_MAGIC, 2, __u8)
+#define SPI_IOC_WR_LSB_FIRST _IOW(SPI_IOC_MAGIC, 2, __u8)
+
+/* Read / Write SPI device word length (1..N) */
+#define SPI_IOC_RD_BITS_PER_WORD _IOR(SPI_IOC_MAGIC, 3, __u8)
+#define SPI_IOC_WR_BITS_PER_WORD _IOW(SPI_IOC_MAGIC, 3, __u8)
+
+/* Read / Write SPI device default max speed hz */
+#define SPI_IOC_RD_MAX_SPEED_HZ _IOR(SPI_IOC_MAGIC, 4, __u32)
+#define SPI_IOC_WR_MAX_SPEED_HZ _IOW(SPI_IOC_MAGIC, 4, __u32)
+
+
+
+#endif /* SPIDEV_H */
atomic_read(&sk->sk_refcnt),
sk_rmem_alloc_get(sk),
sk_wmem_alloc_get(sk),
- sock_i_uid(sk),
+ from_kuid(seq_user_ns(seq), sock_i_uid(sk)),
sock_i_ino(sk),
&src_baswapped,
&dst_baswapped,