compatible = "fsl,imx27-usb";
reg = <0x10024000 0x200>;
interrupts = <56>;
- clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+ clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+ <&clks IMX27_CLK_USB_AHB_GATE>,
+ <&clks IMX27_CLK_USB_DIV>;
+ clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 0>;
status = "disabled";
};
compatible = "fsl,imx27-usb";
reg = <0x10024200 0x200>;
interrupts = <54>;
- clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+ clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+ <&clks IMX27_CLK_USB_AHB_GATE>,
+ <&clks IMX27_CLK_USB_DIV>;
+ clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 1>;
dr_mode = "host";
status = "disabled";
compatible = "fsl,imx27-usb";
reg = <0x10024400 0x200>;
interrupts = <55>;
- clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+ clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+ <&clks IMX27_CLK_USB_AHB_GATE>,
+ <&clks IMX27_CLK_USB_DIV>;
+ clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host";
status = "disabled";
#index-cells = <1>;
compatible = "fsl,imx27-usbmisc";
reg = <0x10024600 0x200>;
- clocks = <&clks IMX27_CLK_USB_AHB_GATE>;
};
sahara2: sahara@10025000 {
struct imx_usbmisc_data *usbmisc_data;
bool supports_runtime_pm;
bool in_lpm;
+ /* SoC before i.mx6 (except imx23/imx28) needs three clks */
+ bool need_three_clks;
+ struct clk *clk_ipg;
+ struct clk *clk_ahb;
+ struct clk *clk_per;
+ /* --------------------------------- */
};
/* Common functions shared by usbmisc drivers */
}
/* End of common functions shared by usbmisc drivers*/
+static int imx_get_clks(struct device *dev)
+{
+ struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+ int ret = 0;
+
+ data->clk_ipg = devm_clk_get(dev, "ipg");
+ if (IS_ERR(data->clk_ipg)) {
+ /* If the platform only needs one clocks */
+ data->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(data->clk)) {
+ ret = PTR_ERR(data->clk);
+ dev_err(dev,
+ "Failed to get clks, err=%ld,%ld\n",
+ PTR_ERR(data->clk), PTR_ERR(data->clk_ipg));
+ return ret;
+ }
+ return ret;
+ }
+
+ data->clk_ahb = devm_clk_get(dev, "ahb");
+ if (IS_ERR(data->clk_ahb)) {
+ ret = PTR_ERR(data->clk_ahb);
+ dev_err(dev,
+ "Failed to get ahb clock, err=%d\n", ret);
+ return ret;
+ }
+
+ data->clk_per = devm_clk_get(dev, "per");
+ if (IS_ERR(data->clk_per)) {
+ ret = PTR_ERR(data->clk_per);
+ dev_err(dev,
+ "Failed to get per clock, err=%d\n", ret);
+ return ret;
+ }
+
+ data->need_three_clks = true;
+ return ret;
+}
+
+static int imx_prepare_enable_clks(struct device *dev)
+{
+ struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (data->need_three_clks) {
+ ret = clk_prepare_enable(data->clk_ipg);
+ if (ret) {
+ dev_err(dev,
+ "Failed to prepare/enable ipg clk, err=%d\n",
+ ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(data->clk_ahb);
+ if (ret) {
+ dev_err(dev,
+ "Failed to prepare/enable ahb clk, err=%d\n",
+ ret);
+ clk_disable_unprepare(data->clk_ipg);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(data->clk_per);
+ if (ret) {
+ dev_err(dev,
+ "Failed to prepare/enable per clk, err=%d\n",
+ ret);
+ clk_disable_unprepare(data->clk_ahb);
+ clk_disable_unprepare(data->clk_ipg);
+ return ret;
+ }
+ } else {
+ ret = clk_prepare_enable(data->clk);
+ if (ret) {
+ dev_err(dev,
+ "Failed to prepare/enable clk, err=%d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+static void imx_disable_unprepare_clks(struct device *dev)
+{
+ struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+
+ if (data->need_three_clks) {
+ clk_disable_unprepare(data->clk_per);
+ clk_disable_unprepare(data->clk_ahb);
+ clk_disable_unprepare(data->clk_ipg);
+ } else {
+ clk_disable_unprepare(data->clk);
+ }
+}
static int ci_hdrc_imx_probe(struct platform_device *pdev)
{
.flags = CI_HDRC_SET_NON_ZERO_TTHA,
};
int ret;
- const struct of_device_id *of_id =
- of_match_device(ci_hdrc_imx_dt_ids, &pdev->dev);
- const struct ci_hdrc_imx_platform_flag *imx_platform_flag = of_id->data;
+ const struct of_device_id *of_id;
+ const struct ci_hdrc_imx_platform_flag *imx_platform_flag;
+
+ of_id = of_match_device(ci_hdrc_imx_dt_ids, &pdev->dev);
+ if (!of_id)
+ return -ENODEV;
+
+ imx_platform_flag = of_id->data;
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
+ platform_set_drvdata(pdev, data);
data->usbmisc_data = usbmisc_get_init_data(&pdev->dev);
if (IS_ERR(data->usbmisc_data))
return PTR_ERR(data->usbmisc_data);
- data->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(data->clk)) {
- dev_err(&pdev->dev,
- "Failed to get clock, err=%ld\n", PTR_ERR(data->clk));
- return PTR_ERR(data->clk);
- }
+ ret = imx_get_clks(&pdev->dev);
+ if (ret)
+ return ret;
- ret = clk_prepare_enable(data->clk);
- if (ret) {
- dev_err(&pdev->dev,
- "Failed to prepare or enable clock, err=%d\n", ret);
+ ret = imx_prepare_enable_clks(&pdev->dev);
+ if (ret)
return ret;
- }
data->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "fsl,usbphy", 0);
if (IS_ERR(data->phy)) {
goto disable_device;
}
- platform_set_drvdata(pdev, data);
-
if (data->supports_runtime_pm) {
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
disable_device:
ci_hdrc_remove_device(data->ci_pdev);
err_clk:
- clk_disable_unprepare(data->clk);
+ imx_disable_unprepare_clks(&pdev->dev);
return ret;
}
pm_runtime_put_noidle(&pdev->dev);
}
ci_hdrc_remove_device(data->ci_pdev);
- clk_disable_unprepare(data->clk);
+ imx_disable_unprepare_clks(&pdev->dev);
return 0;
}
dev_dbg(dev, "at %s\n", __func__);
- clk_disable_unprepare(data->clk);
+ imx_disable_unprepare_clks(dev);
data->in_lpm = true;
return 0;
return 0;
}
- ret = clk_prepare_enable(data->clk);
+ ret = imx_prepare_enable_clks(dev);
if (ret)
return ret;
return 0;
clk_disable:
- clk_disable_unprepare(data->clk);
+ imx_disable_unprepare_clks(dev);
return ret;
}
return -EINVAL;
pm_runtime_get_sync(ci->dev);
+ disable_irq(ci->irq);
ci_role_stop(ci);
ret = ci_role_start(ci, role);
+ enable_irq(ci->irq);
pm_runtime_put_sync(ci->dev);
return ret ? ret : count;
return retval;
}
+static void ci_udc_stop_for_otg_fsm(struct ci_hdrc *ci)
+{
+ if (!ci_otg_is_fsm_mode(ci))
+ return;
+
+ mutex_lock(&ci->fsm.lock);
+ if (ci->fsm.otg->state == OTG_STATE_A_PERIPHERAL) {
+ ci->fsm.a_bidl_adis_tmout = 1;
+ ci_hdrc_otg_fsm_start(ci);
+ } else if (ci->fsm.otg->state == OTG_STATE_B_PERIPHERAL) {
+ ci->fsm.protocol = PROTO_UNDEF;
+ ci->fsm.otg->state = OTG_STATE_UNDEFINED;
+ }
+ mutex_unlock(&ci->fsm.lock);
+}
+
/**
* ci_udc_stop: unregister a gadget driver
*/
ci->driver = NULL;
spin_unlock_irqrestore(&ci->lock, flags);
+ ci_udc_stop_for_otg_fsm(ci);
return 0;
}
{
struct resource *res;
struct imx_usbmisc *data;
- struct of_device_id *tmp_dev;
+ const struct of_device_id *of_id;
+
+ of_id = of_match_device(usbmisc_imx_dt_ids, &pdev->dev);
+ if (!of_id)
+ return -ENODEV;
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
if (IS_ERR(data->base))
return PTR_ERR(data->base);
- tmp_dev = (struct of_device_id *)
- of_match_device(usbmisc_imx_dt_ids, &pdev->dev);
- data->ops = (const struct usbmisc_ops *)tmp_dev->data;
+ data->ops = (const struct usbmisc_ops *)of_id->data;
platform_set_drvdata(pdev, data);
return 0;
*/
static void dwc2_hcd_rem_wakeup(struct dwc2_hsotg *hsotg)
{
- if (hsotg->lx_state == DWC2_L2) {
+ if (hsotg->bus_suspended) {
hsotg->flags.b.port_suspend_change = 1;
usb_hcd_resume_root_hub(hsotg->priv);
- } else {
- hsotg->flags.b.port_l1_change = 1;
}
+
+ if (hsotg->lx_state == DWC2_L1)
+ hsotg->flags.b.port_l1_change = 1;
}
/**
dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n",
dwc2_readl(hsotg->regs + HPRT0));
- hsotg->bus_suspended = 0;
dwc2_hcd_rem_wakeup(hsotg);
+ hsotg->bus_suspended = 0;
/* Change to L0 state */
hsotg->lx_state = DWC2_L0;
.host_ls_low_power_phy_clk = -1,
.ts_dline = -1,
.reload_ctl = -1,
- .ahbcfg = 0x7, /* INCR16 */
+ .ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
+ GAHBCFG_HBSTLEN_SHIFT,
.uframe_sched = -1,
.external_id_pin_ctl = -1,
.hibernation = -1,
#define PCI_DEVICE_ID_INTEL_BSW 0x22b7
#define PCI_DEVICE_ID_INTEL_SPTLP 0x9d30
#define PCI_DEVICE_ID_INTEL_SPTH 0xa130
+#define PCI_DEVICE_ID_INTEL_BXT 0x0aaa
+#define PCI_DEVICE_ID_INTEL_APL 0x5aaa
static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
static const struct acpi_gpio_params cs_gpios = { 1, 0, false };
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTLP), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTH), },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), },
{ } /* Terminating Entry */
};
}
dwc->gadget.ops = &dwc3_gadget_ops;
- dwc->gadget.max_speed = USB_SPEED_SUPER;
dwc->gadget.speed = USB_SPEED_UNKNOWN;
dwc->gadget.sg_supported = true;
dwc->gadget.name = "dwc3-gadget";
+ /*
+ * FIXME We might be setting max_speed to <SUPER, however versions
+ * <2.20a of dwc3 have an issue with metastability (documented
+ * elsewhere in this driver) which tells us we can't set max speed to
+ * anything lower than SUPER.
+ *
+ * Because gadget.max_speed is only used by composite.c and function
+ * drivers (i.e. it won't go into dwc3's registers) we are allowing this
+ * to happen so we avoid sending SuperSpeed Capability descriptor
+ * together with our BOS descriptor as that could confuse host into
+ * thinking we can handle super speed.
+ *
+ * Note that, in fact, we won't even support GetBOS requests when speed
+ * is less than super speed because we don't have means, yet, to tell
+ * composite.c that we are USB 2.0 + LPM ECN.
+ */
+ if (dwc->revision < DWC3_REVISION_220A)
+ dwc3_trace(trace_dwc3_gadget,
+ "Changing max_speed on rev %08x\n",
+ dwc->revision);
+
+ dwc->gadget.max_speed = dwc->maximum_speed;
+
/*
* Per databook, DWC3 needs buffer size to be aligned to MaxPacketSize
* on ep out.
for (i = 0; i < loop->qlen && result == 0; i++) {
result = -ENOMEM;
- in_req = usb_ep_alloc_request(loop->in_ep, GFP_KERNEL);
+ in_req = usb_ep_alloc_request(loop->in_ep, GFP_ATOMIC);
if (!in_req)
goto fail;
spin_lock(&udc->lock);
int_enb = usba_int_enb_get(udc);
- status = usba_readl(udc, INT_STA) & int_enb;
+ status = usba_readl(udc, INT_STA) & (int_enb | USBA_HIGH_SPEED);
DBG(DBG_INT, "irq, status=%#08x\n", status);
if (status & USBA_DET_SUSPEND) {
status |= USB_PORT_STAT_SUSPEND;
}
}
- if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0
- && (raw_port_status & PORT_POWER)
- && (bus_state->suspended_ports & (1 << wIndex))) {
- bus_state->suspended_ports &= ~(1 << wIndex);
- if (hcd->speed < HCD_USB3)
- bus_state->port_c_suspend |= 1 << wIndex;
+ if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0 &&
+ (raw_port_status & PORT_POWER)) {
+ if (bus_state->suspended_ports & (1 << wIndex)) {
+ bus_state->suspended_ports &= ~(1 << wIndex);
+ if (hcd->speed < HCD_USB3)
+ bus_state->port_c_suspend |= 1 << wIndex;
+ }
+ bus_state->resume_done[wIndex] = 0;
+ clear_bit(wIndex, &bus_state->resuming_ports);
}
if (raw_port_status & PORT_CONNECT) {
status |= USB_PORT_STAT_CONNECTION;
return ret;
}
-static int ep_ring_is_processing(struct xhci_hcd *xhci,
- int slot_id, unsigned int ep_index)
-{
- struct xhci_virt_device *xdev;
- struct xhci_ring *ep_ring;
- struct xhci_ep_ctx *ep_ctx;
- struct xhci_virt_ep *xep;
- dma_addr_t hw_deq;
-
- xdev = xhci->devs[slot_id];
- xep = &xhci->devs[slot_id]->eps[ep_index];
- ep_ring = xep->ring;
- ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
-
- if ((le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) != EP_STATE_RUNNING)
- return 0;
-
- hw_deq = le64_to_cpu(ep_ctx->deq) & ~EP_CTX_CYCLE_MASK;
- return (hw_deq !=
- xhci_trb_virt_to_dma(ep_ring->enq_seg, ep_ring->enqueue));
-}
-
/*
* Check transfer ring to guarantee there is enough room for the urb.
* Update ISO URB start_frame and interval.
}
/* Calculate the start frame and put it in urb->start_frame. */
- if (HCC_CFC(xhci->hcc_params) &&
- ep_ring_is_processing(xhci, slot_id, ep_index)) {
- urb->start_frame = xep->next_frame_id;
- goto skip_start_over;
+ if (HCC_CFC(xhci->hcc_params) && !list_empty(&ep_ring->td_list)) {
+ if ((le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) ==
+ EP_STATE_RUNNING) {
+ urb->start_frame = xep->next_frame_id;
+ goto skip_start_over;
+ }
}
start_frame = readl(&xhci->run_regs->microframe_index);
command |= CMD_RESET;
writel(command, &xhci->op_regs->command);
+ /* Existing Intel xHCI controllers require a delay of 1 mS,
+ * after setting the CMD_RESET bit, and before accessing any
+ * HC registers. This allows the HC to complete the
+ * reset operation and be ready for HC register access.
+ * Without this delay, the subsequent HC register access,
+ * may result in a system hang very rarely.
+ */
+ if (xhci->quirks & XHCI_INTEL_HOST)
+ udelay(1000);
+
ret = xhci_handshake(&xhci->op_regs->command,
CMD_RESET, 0, 10 * 1000 * 1000);
if (ret)
/*-------------------------------------------------------------------------*/
#ifndef CONFIG_BLACKFIN
-static int musb_ulpi_read(struct usb_phy *phy, u32 offset)
+static int musb_ulpi_read(struct usb_phy *phy, u32 reg)
{
void __iomem *addr = phy->io_priv;
int i = 0;
* ULPICarKitControlDisableUTMI after clearing POWER_SUSPENDM.
*/
- musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset);
+ musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg);
musb_writeb(addr, MUSB_ULPI_REG_CONTROL,
MUSB_ULPI_REG_REQ | MUSB_ULPI_RDN_WR);
return ret;
}
-static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
+static int musb_ulpi_write(struct usb_phy *phy, u32 val, u32 reg)
{
void __iomem *addr = phy->io_priv;
int i = 0;
power &= ~MUSB_POWER_SUSPENDM;
musb_writeb(addr, MUSB_POWER, power);
- musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset);
- musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)data);
+ musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg);
+ musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)val);
musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ);
while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
static bool use_dma = 1;
/* "modprobe ... use_dma=0" etc */
-module_param(use_dma, bool, 0);
+module_param(use_dma, bool, 0644);
MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit)
struct musb *musb = ep->musb;
void __iomem *epio = ep->regs;
u16 csr;
- u16 lastcsr = 0;
int retries = 1000;
csr = musb_readw(epio, MUSB_TXCSR);
while (csr & MUSB_TXCSR_FIFONOTEMPTY) {
- if (csr != lastcsr)
- dev_dbg(musb->controller, "Host TX FIFONOTEMPTY csr: %02x\n", csr);
- lastcsr = csr;
csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_TXPKTRDY;
musb_writew(epio, MUSB_TXCSR, csr);
csr = musb_readw(epio, MUSB_TXCSR);
- if (WARN(retries-- < 1,
+
+ /*
+ * FIXME: sometimes the tx fifo flush failed, it has been
+ * observed during device disconnect on AM335x.
+ *
+ * To reproduce the issue, ensure tx urb(s) are queued when
+ * unplug the usb device which is connected to AM335x usb
+ * host port.
+ *
+ * I found using a usb-ethernet device and running iperf
+ * (client on AM335x) has very high chance to trigger it.
+ *
+ * Better to turn on dev_dbg() in musb_cleanup_urb() with
+ * CPPI enabled to see the issue when aborting the tx channel.
+ */
+ if (dev_WARN_ONCE(musb->controller, retries-- < 1,
"Could not flush host TX%d fifo: csr: %04x\n",
ep->epnum, csr))
return;
- mdelay(1);
}
}
struct clk *clk;
struct mxs_phy *mxs_phy;
int ret;
- const struct of_device_id *of_id =
- of_match_device(mxs_phy_dt_ids, &pdev->dev);
+ const struct of_device_id *of_id;
struct device_node *np = pdev->dev.of_node;
+ of_id = of_match_device(mxs_phy_dt_ids, &pdev->dev);
+ if (!of_id)
+ return -ENODEV;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base))
extcon = extcon_get_extcon_dev(config->extcon);
if (!extcon)
return -EPROBE_DEFER;
- otg_dev->extcon = extcon;
otg_dev = devm_kzalloc(&pdev->dev, sizeof(*otg_dev), GFP_KERNEL);
if (!otg_dev)
if (IS_ERR(otg_dev->base))
return PTR_ERR(otg_dev->base);
+ otg_dev->extcon = extcon;
otg_dev->id_nb.notifier_call = omap_otg_id_notifier;
otg_dev->vbus_nb.notifier_call = omap_otg_vbus_notifier;
projects / firefly-linux-kernel-4.4.55.git / commitdiff