e1000e: Modify Tx/Rx configurations to avoid null pointer dereferences in e1000_open
authorJia-Ju Bai <baijiaju1990@163.com>
Wed, 5 Aug 2015 10:16:10 +0000 (18:16 +0800)
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>
Tue, 18 Aug 2015 21:06:06 +0000 (14:06 -0700)
When e1000e_setup_rx_resources is failed in e1000_open,
e1000e_free_tx_resources in "err_setup_rx" segment is executed.
"writel(0, tx_ring->head)" statement in e1000_clean_tx_ring
in e1000e_free_tx_resources will cause a null poonter dereference(crash),
because "tx_ring->head" is only assigned in e1000_configure_tx
in e1000_configure, but it is after e1000e_setup_rx_resources.

This patch moves head/tail register writing to e1000_configure_tx/rx,
which can fix this problem. It is inspired by igb_configure_tx_ring
in the igb driver.

Specially, thank Alexander Duyck for his valuable suggestion.

Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
drivers/net/ethernet/intel/e1000e/netdev.c

index 546b5da168dca57c8b4d7ea0f75a895fe99f74d4..faf4b3f3d0b53ed5ecbf17c87507bba0e45ff1df 100644 (file)
@@ -1737,12 +1737,6 @@ static void e1000_clean_rx_ring(struct e1000_ring *rx_ring)
        rx_ring->next_to_clean = 0;
        rx_ring->next_to_use = 0;
        adapter->flags2 &= ~FLAG2_IS_DISCARDING;
-
-       writel(0, rx_ring->head);
-       if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
-               e1000e_update_rdt_wa(rx_ring, 0);
-       else
-               writel(0, rx_ring->tail);
 }
 
 static void e1000e_downshift_workaround(struct work_struct *work)
@@ -2447,12 +2441,6 @@ static void e1000_clean_tx_ring(struct e1000_ring *tx_ring)
 
        tx_ring->next_to_use = 0;
        tx_ring->next_to_clean = 0;
-
-       writel(0, tx_ring->head);
-       if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
-               e1000e_update_tdt_wa(tx_ring, 0);
-       else
-               writel(0, tx_ring->tail);
 }
 
 /**
@@ -2954,6 +2942,12 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
        tx_ring->head = adapter->hw.hw_addr + E1000_TDH(0);
        tx_ring->tail = adapter->hw.hw_addr + E1000_TDT(0);
 
+       writel(0, tx_ring->head);
+       if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+               e1000e_update_tdt_wa(tx_ring, 0);
+       else
+               writel(0, tx_ring->tail);
+
        /* Set the Tx Interrupt Delay register */
        ew32(TIDV, adapter->tx_int_delay);
        /* Tx irq moderation */
@@ -3275,6 +3269,12 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
        rx_ring->head = adapter->hw.hw_addr + E1000_RDH(0);
        rx_ring->tail = adapter->hw.hw_addr + E1000_RDT(0);
 
+       writel(0, rx_ring->head);
+       if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+               e1000e_update_rdt_wa(rx_ring, 0);
+       else
+               writel(0, rx_ring->tail);
+
        /* Enable Receive Checksum Offload for TCP and UDP */
        rxcsum = er32(RXCSUM);
        if (adapter->netdev->features & NETIF_F_RXCSUM)