* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (38 commits)
[SCSI] More buffer->request_buffer changes
[SCSI] mptfusion: bump version to 3.04.01
[SCSI] mptfusion: misc fix's
[SCSI] mptfusion: firmware download boot fix's
[SCSI] mptfusion: task abort fix's
[SCSI] mptfusion: sas nexus loss support
[SCSI] mptfusion: sas loginfo update
[SCSI] mptfusion: mptctl panic when loading
[SCSI] mptfusion: sas enclosures with smart drive
[SCSI] NCR_D700: misc fixes (section and argument ordering)
[SCSI] scsi_debug: must_check fixes
[SCSI] scsi_transport_sas: kill the use of channel
[SCSI] scsi_transport_sas: add expander backlink
[SCSI] hide EH backup data outside the scsi_cmnd
[SCSI] ibmvscsi: handle inactive SCSI target during probe
[SCSI] ibmvscsi: allocate lpevents for ibmvscsi on iseries
[SCSI] aic7[9x]xx: Remove last vestiges of reverse_scan
[SCSI] aha152x: stop poking at saved scsi_cmnd members
[SCSI] st.c: Improve sense output
[SCSI] lpfc 8.1.7: Change version number to 8.1.7
...
S: United Kingdom
N: Luiz Fernando N. Capitulino
-E: lcapitulino@terra.com.br
-E: lcapitulino@prefeitura.sp.gov.br
-W: http://www.telecentros.sp.gov.br
-D: Little fixes and a lot of janitorial work
-S: E-GOV Telecentros SP
+E: lcapitulino@mandriva.com.br
+E: lcapitulino@gmail.com
+W: http://www.cpu.eti.br
+D: misc kernel hacking
+S: Mandriva
S: Brazil
N: Remy Card
always going to be SAC addressable.
The first thing your driver needs to do is query the PCI platform
-layer with your devices DAC addressing capabilities:
+layer if it is capable of handling your devices DAC addressing
+capabilities:
- int pci_dac_set_dma_mask(struct pci_dev *pdev, u64 mask);
+ int pci_dac_dma_supported(struct pci_dev *hwdev, u64 mask);
-This routine behaves identically to pci_set_dma_mask. You may not
-use the following interfaces if this routine fails.
+You may not use the following interfaces if this routine fails.
Next, DMA addresses using this API are kept track of using the
dma64_addr_t type. It is guaranteed to be big enough to hold any
+ spin_lock(&listmutex);
list_for_each_entry(p, head, lp) {
if (p->key == key) {
- list_del(&p->list);
+ - list_del(&p->list);
- write_unlock(&listmutex);
+ + list_del_rcu(&p->list);
+ spin_unlock(&listmutex);
+ synchronize_rcu();
kfree(p);
5 write_lock(&listmutex); 5 spin_lock(&listmutex);
6 list_for_each_entry(p, head, lp) { 6 list_for_each_entry(p, head, lp) {
7 if (p->key == key) { 7 if (p->key == key) {
- 8 list_del(&p->list); 8 list_del(&p->list);
+ 8 list_del(&p->list); 8 list_del_rcu(&p->list);
9 write_unlock(&listmutex); 9 spin_unlock(&listmutex);
10 synchronize_rcu();
10 kfree(p); 11 kfree(p);
Linux Kernel patch sumbittal checklist
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Here are some basic things that developers should do if they
-want to see their kernel patch submittals accepted quicker.
+Here are some basic things that developers should do if they want to see their
+kernel patch submissions accepted more quickly.
-These are all above and beyond the documentation that is provided
-in Documentation/SubmittingPatches and elsewhere about submitting
-Linux kernel patches.
+These are all above and beyond the documentation that is provided in
+Documentation/SubmittingPatches and elsewhere regarding submitting Linux
+kernel patches.
-- Builds cleanly with applicable or modified CONFIG options =y, =m, and =n.
- No gcc warnings/errors, no linker warnings/errors.
+1: Builds cleanly with applicable or modified CONFIG options =y, =m, and
+ =n. No gcc warnings/errors, no linker warnings/errors.
-- Passes allnoconfig, allmodconfig
+2: Passes allnoconfig, allmodconfig
-- Builds on multiple CPU arch-es by using local cross-compile tools
- or something like PLM at OSDL.
+3: Builds on multiple CPU architectures by using local cross-compile tools
+ or something like PLM at OSDL.
-- ppc64 is a good architecture for cross-compilation checking because it
- tends to use `unsigned long' for 64-bit quantities.
+4: ppc64 is a good architecture for cross-compilation checking because it
+ tends to use `unsigned long' for 64-bit quantities.
-- Matches kernel coding style(!)
+5: Matches kernel coding style(!)
-- Any new or modified CONFIG options don't muck up the config menu.
+6: Any new or modified CONFIG options don't muck up the config menu.
-- All new Kconfig options have help text.
+7: All new Kconfig options have help text.
-- Has been carefully reviewed with respect to relevant Kconfig
- combinations. This is very hard to get right with testing --
- brainpower pays off here.
+8: Has been carefully reviewed with respect to relevant Kconfig
+ combinations. This is very hard to get right with testing -- brainpower
+ pays off here.
-- Check cleanly with sparse.
+9: Check cleanly with sparse.
-- Use 'make checkstack' and 'make namespacecheck' and fix any
- problems that they find. Note: checkstack does not point out
- problems explicitly, but any one function that uses more than
- 512 bytes on the stack is a candidate for change.
+10: Use 'make checkstack' and 'make namespacecheck' and fix any problems
+ that they find. Note: checkstack does not point out problems explicitly,
+ but any one function that uses more than 512 bytes on the stack is a
+ candidate for change.
-- Include kernel-doc to document global kernel APIs. (Not required
- for static functions, but OK there also.) Use 'make htmldocs'
- or 'make mandocs' to check the kernel-doc and fix any issues.
+11: Include kernel-doc to document global kernel APIs. (Not required for
+ static functions, but OK there also.) Use 'make htmldocs' or 'make
+ mandocs' to check the kernel-doc and fix any issues.
-- Has been tested with CONFIG_PREEMPT, CONFIG_DEBUG_PREEMPT,
- CONFIG_DEBUG_SLAB, CONFIG_DEBUG_PAGEALLOC, CONFIG_DEBUG_MUTEXES,
- CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_SPINLOCK_SLEEP all simultaneously
- enabled.
+12: Has been tested with CONFIG_PREEMPT, CONFIG_DEBUG_PREEMPT,
+ CONFIG_DEBUG_SLAB, CONFIG_DEBUG_PAGEALLOC, CONFIG_DEBUG_MUTEXES,
+ CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_SPINLOCK_SLEEP all simultaneously
+ enabled.
-- Has been build- and runtime tested with and without CONFIG_SMP and
- CONFIG_PREEMPT.
+13: Has been build- and runtime tested with and without CONFIG_SMP and
+ CONFIG_PREEMPT.
-- If the patch affects IO/Disk, etc: has been tested with and without
- CONFIG_LBD.
+14: If the patch affects IO/Disk, etc: has been tested with and without
+ CONFIG_LBD.
+15: All codepaths have been exercised with all lockdep features enabled.
-2006-APR-27
+16: All new /proc entries are documented under Documentation/
+
+17: All new kernel boot parameters are documented in
+ Documentation/kernel-parameters.txt.
+
+18: All new module parameters are documented with MODULE_PARM_DESC()
--- /dev/null
+Delay accounting
+----------------
+
+Tasks encounter delays in execution when they wait
+for some kernel resource to become available e.g. a
+runnable task may wait for a free CPU to run on.
+
+The per-task delay accounting functionality measures
+the delays experienced by a task while
+
+a) waiting for a CPU (while being runnable)
+b) completion of synchronous block I/O initiated by the task
+c) swapping in pages
+
+and makes these statistics available to userspace through
+the taskstats interface.
+
+Such delays provide feedback for setting a task's cpu priority,
+io priority and rss limit values appropriately. Long delays for
+important tasks could be a trigger for raising its corresponding priority.
+
+The functionality, through its use of the taskstats interface, also provides
+delay statistics aggregated for all tasks (or threads) belonging to a
+thread group (corresponding to a traditional Unix process). This is a commonly
+needed aggregation that is more efficiently done by the kernel.
+
+Userspace utilities, particularly resource management applications, can also
+aggregate delay statistics into arbitrary groups. To enable this, delay
+statistics of a task are available both during its lifetime as well as on its
+exit, ensuring continuous and complete monitoring can be done.
+
+
+Interface
+---------
+
+Delay accounting uses the taskstats interface which is described
+in detail in a separate document in this directory. Taskstats returns a
+generic data structure to userspace corresponding to per-pid and per-tgid
+statistics. The delay accounting functionality populates specific fields of
+this structure. See
+ include/linux/taskstats.h
+for a description of the fields pertaining to delay accounting.
+It will generally be in the form of counters returning the cumulative
+delay seen for cpu, sync block I/O, swapin etc.
+
+Taking the difference of two successive readings of a given
+counter (say cpu_delay_total) for a task will give the delay
+experienced by the task waiting for the corresponding resource
+in that interval.
+
+When a task exits, records containing the per-task statistics
+are sent to userspace without requiring a command. If it is the last exiting
+task of a thread group, the per-tgid statistics are also sent. More details
+are given in the taskstats interface description.
+
+The getdelays.c userspace utility in this directory allows simple commands to
+be run and the corresponding delay statistics to be displayed. It also serves
+as an example of using the taskstats interface.
+
+Usage
+-----
+
+Compile the kernel with
+ CONFIG_TASK_DELAY_ACCT=y
+ CONFIG_TASKSTATS=y
+
+Enable the accounting at boot time by adding
+the following to the kernel boot options
+ delayacct
+
+and after the system has booted up, use a utility
+similar to getdelays.c to access the delays
+seen by a given task or a task group (tgid).
+The utility also allows a given command to be
+executed and the corresponding delays to be
+seen.
+
+General format of the getdelays command
+
+getdelays [-t tgid] [-p pid] [-c cmd...]
+
+
+Get delays, since system boot, for pid 10
+# ./getdelays -p 10
+(output similar to next case)
+
+Get sum of delays, since system boot, for all pids with tgid 5
+# ./getdelays -t 5
+
+
+CPU count real total virtual total delay total
+ 7876 92005750 100000000 24001500
+IO count delay total
+ 0 0
+MEM count delay total
+ 0 0
+
+Get delays seen in executing a given simple command
+# ./getdelays -c ls /
+
+bin data1 data3 data5 dev home media opt root srv sys usr
+boot data2 data4 data6 etc lib mnt proc sbin subdomain tmp var
+
+
+CPU count real total virtual total delay total
+ 6 4000250 4000000 0
+IO count delay total
+ 0 0
+MEM count delay total
+ 0 0
--- /dev/null
+/* getdelays.c
+ *
+ * Utility to get per-pid and per-tgid delay accounting statistics
+ * Also illustrates usage of the taskstats interface
+ *
+ * Copyright (C) Shailabh Nagar, IBM Corp. 2005
+ * Copyright (C) Balbir Singh, IBM Corp. 2006
+ * Copyright (c) Jay Lan, SGI. 2006
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <unistd.h>
+#include <poll.h>
+#include <string.h>
+#include <fcntl.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/socket.h>
+#include <sys/types.h>
+#include <signal.h>
+
+#include <linux/genetlink.h>
+#include <linux/taskstats.h>
+
+/*
+ * Generic macros for dealing with netlink sockets. Might be duplicated
+ * elsewhere. It is recommended that commercial grade applications use
+ * libnl or libnetlink and use the interfaces provided by the library
+ */
+#define GENLMSG_DATA(glh) ((void *)(NLMSG_DATA(glh) + GENL_HDRLEN))
+#define GENLMSG_PAYLOAD(glh) (NLMSG_PAYLOAD(glh, 0) - GENL_HDRLEN)
+#define NLA_DATA(na) ((void *)((char*)(na) + NLA_HDRLEN))
+#define NLA_PAYLOAD(len) (len - NLA_HDRLEN)
+
+#define err(code, fmt, arg...) do { printf(fmt, ##arg); exit(code); } while (0)
+int done = 0;
+int rcvbufsz=0;
+
+ char name[100];
+int dbg=0, print_delays=0;
+__u64 stime, utime;
+#define PRINTF(fmt, arg...) { \
+ if (dbg) { \
+ printf(fmt, ##arg); \
+ } \
+ }
+
+/* Maximum size of response requested or message sent */
+#define MAX_MSG_SIZE 256
+/* Maximum number of cpus expected to be specified in a cpumask */
+#define MAX_CPUS 32
+/* Maximum length of pathname to log file */
+#define MAX_FILENAME 256
+
+struct msgtemplate {
+ struct nlmsghdr n;
+ struct genlmsghdr g;
+ char buf[MAX_MSG_SIZE];
+};
+
+char cpumask[100+6*MAX_CPUS];
+
+/*
+ * Create a raw netlink socket and bind
+ */
+static int create_nl_socket(int protocol)
+{
+ int fd;
+ struct sockaddr_nl local;
+
+ fd = socket(AF_NETLINK, SOCK_RAW, protocol);
+ if (fd < 0)
+ return -1;
+
+ if (rcvbufsz)
+ if (setsockopt(fd, SOL_SOCKET, SO_RCVBUF,
+ &rcvbufsz, sizeof(rcvbufsz)) < 0) {
+ printf("Unable to set socket rcv buf size to %d\n",
+ rcvbufsz);
+ return -1;
+ }
+
+ memset(&local, 0, sizeof(local));
+ local.nl_family = AF_NETLINK;
+
+ if (bind(fd, (struct sockaddr *) &local, sizeof(local)) < 0)
+ goto error;
+
+ return fd;
+error:
+ close(fd);
+ return -1;
+}
+
+
+int send_cmd(int sd, __u16 nlmsg_type, __u32 nlmsg_pid,
+ __u8 genl_cmd, __u16 nla_type,
+ void *nla_data, int nla_len)
+{
+ struct nlattr *na;
+ struct sockaddr_nl nladdr;
+ int r, buflen;
+ char *buf;
+
+ struct msgtemplate msg;
+
+ msg.n.nlmsg_len = NLMSG_LENGTH(GENL_HDRLEN);
+ msg.n.nlmsg_type = nlmsg_type;
+ msg.n.nlmsg_flags = NLM_F_REQUEST;
+ msg.n.nlmsg_seq = 0;
+ msg.n.nlmsg_pid = nlmsg_pid;
+ msg.g.cmd = genl_cmd;
+ msg.g.version = 0x1;
+ na = (struct nlattr *) GENLMSG_DATA(&msg);
+ na->nla_type = nla_type;
+ na->nla_len = nla_len + 1 + NLA_HDRLEN;
+ memcpy(NLA_DATA(na), nla_data, nla_len);
+ msg.n.nlmsg_len += NLMSG_ALIGN(na->nla_len);
+
+ buf = (char *) &msg;
+ buflen = msg.n.nlmsg_len ;
+ memset(&nladdr, 0, sizeof(nladdr));
+ nladdr.nl_family = AF_NETLINK;
+ while ((r = sendto(sd, buf, buflen, 0, (struct sockaddr *) &nladdr,
+ sizeof(nladdr))) < buflen) {
+ if (r > 0) {
+ buf += r;
+ buflen -= r;
+ } else if (errno != EAGAIN)
+ return -1;
+ }
+ return 0;
+}
+
+
+/*
+ * Probe the controller in genetlink to find the family id
+ * for the TASKSTATS family
+ */
+int get_family_id(int sd)
+{
+ struct {
+ struct nlmsghdr n;
+ struct genlmsghdr g;
+ char buf[256];
+ } ans;
+
+ int id, rc;
+ struct nlattr *na;
+ int rep_len;
+
+ strcpy(name, TASKSTATS_GENL_NAME);
+ rc = send_cmd(sd, GENL_ID_CTRL, getpid(), CTRL_CMD_GETFAMILY,
+ CTRL_ATTR_FAMILY_NAME, (void *)name,
+ strlen(TASKSTATS_GENL_NAME)+1);
+
+ rep_len = recv(sd, &ans, sizeof(ans), 0);
+ if (ans.n.nlmsg_type == NLMSG_ERROR ||
+ (rep_len < 0) || !NLMSG_OK((&ans.n), rep_len))
+ return 0;
+
+ na = (struct nlattr *) GENLMSG_DATA(&ans);
+ na = (struct nlattr *) ((char *) na + NLA_ALIGN(na->nla_len));
+ if (na->nla_type == CTRL_ATTR_FAMILY_ID) {
+ id = *(__u16 *) NLA_DATA(na);
+ }
+ return id;
+}
+
+void print_delayacct(struct taskstats *t)
+{
+ printf("\n\nCPU %15s%15s%15s%15s\n"
+ " %15llu%15llu%15llu%15llu\n"
+ "IO %15s%15s\n"
+ " %15llu%15llu\n"
+ "MEM %15s%15s\n"
+ " %15llu%15llu\n\n",
+ "count", "real total", "virtual total", "delay total",
+ t->cpu_count, t->cpu_run_real_total, t->cpu_run_virtual_total,
+ t->cpu_delay_total,
+ "count", "delay total",
+ t->blkio_count, t->blkio_delay_total,
+ "count", "delay total", t->swapin_count, t->swapin_delay_total);
+}
+
+int main(int argc, char *argv[])
+{
+ int c, rc, rep_len, aggr_len, len2, cmd_type;
+ __u16 id;
+ __u32 mypid;
+
+ struct nlattr *na;
+ int nl_sd = -1;
+ int len = 0;
+ pid_t tid = 0;
+ pid_t rtid = 0;
+
+ int fd = 0;
+ int count = 0;
+ int write_file = 0;
+ int maskset = 0;
+ char logfile[128];
+ int loop = 0;
+
+ struct msgtemplate msg;
+
+ while (1) {
+ c = getopt(argc, argv, "dw:r:m:t:p:v:l");
+ if (c < 0)
+ break;
+
+ switch (c) {
+ case 'd':
+ printf("print delayacct stats ON\n");
+ print_delays = 1;
+ break;
+ case 'w':
+ strncpy(logfile, optarg, MAX_FILENAME);
+ printf("write to file %s\n", logfile);
+ write_file = 1;
+ break;
+ case 'r':
+ rcvbufsz = atoi(optarg);
+ printf("receive buf size %d\n", rcvbufsz);
+ if (rcvbufsz < 0)
+ err(1, "Invalid rcv buf size\n");
+ break;
+ case 'm':
+ strncpy(cpumask, optarg, sizeof(cpumask));
+ maskset = 1;
+ printf("cpumask %s maskset %d\n", cpumask, maskset);
+ break;
+ case 't':
+ tid = atoi(optarg);
+ if (!tid)
+ err(1, "Invalid tgid\n");
+ cmd_type = TASKSTATS_CMD_ATTR_TGID;
+ print_delays = 1;
+ break;
+ case 'p':
+ tid = atoi(optarg);
+ if (!tid)
+ err(1, "Invalid pid\n");
+ cmd_type = TASKSTATS_CMD_ATTR_PID;
+ print_delays = 1;
+ break;
+ case 'v':
+ printf("debug on\n");
+ dbg = 1;
+ break;
+ case 'l':
+ printf("listen forever\n");
+ loop = 1;
+ break;
+ default:
+ printf("Unknown option %d\n", c);
+ exit(-1);
+ }
+ }
+
+ if (write_file) {
+ fd = open(logfile, O_WRONLY | O_CREAT | O_TRUNC,
+ S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
+ if (fd == -1) {
+ perror("Cannot open output file\n");
+ exit(1);
+ }
+ }
+
+ if ((nl_sd = create_nl_socket(NETLINK_GENERIC)) < 0)
+ err(1, "error creating Netlink socket\n");
+
+
+ mypid = getpid();
+ id = get_family_id(nl_sd);
+ if (!id) {
+ printf("Error getting family id, errno %d", errno);
+ goto err;
+ }
+ PRINTF("family id %d\n", id);
+
+ if (maskset) {
+ rc = send_cmd(nl_sd, id, mypid, TASKSTATS_CMD_GET,
+ TASKSTATS_CMD_ATTR_REGISTER_CPUMASK,
+ &cpumask, sizeof(cpumask));
+ PRINTF("Sent register cpumask, retval %d\n", rc);
+ if (rc < 0) {
+ printf("error sending register cpumask\n");
+ goto err;
+ }
+ }
+
+ if (tid) {
+ rc = send_cmd(nl_sd, id, mypid, TASKSTATS_CMD_GET,
+ cmd_type, &tid, sizeof(__u32));
+ PRINTF("Sent pid/tgid, retval %d\n", rc);
+ if (rc < 0) {
+ printf("error sending tid/tgid cmd\n");
+ goto done;
+ }
+ }
+
+ do {
+ int i;
+
+ rep_len = recv(nl_sd, &msg, sizeof(msg), 0);
+ PRINTF("received %d bytes\n", rep_len);
+
+ if (rep_len < 0) {
+ printf("nonfatal reply error: errno %d\n", errno);
+ continue;
+ }
+ if (msg.n.nlmsg_type == NLMSG_ERROR ||
+ !NLMSG_OK((&msg.n), rep_len)) {
+ printf("fatal reply error, errno %d\n", errno);
+ goto done;
+ }
+
+ PRINTF("nlmsghdr size=%d, nlmsg_len=%d, rep_len=%d\n",
+ sizeof(struct nlmsghdr), msg.n.nlmsg_len, rep_len);
+
+
+ rep_len = GENLMSG_PAYLOAD(&msg.n);
+
+ na = (struct nlattr *) GENLMSG_DATA(&msg);
+ len = 0;
+ i = 0;
+ while (len < rep_len) {
+ len += NLA_ALIGN(na->nla_len);
+ switch (na->nla_type) {
+ case TASKSTATS_TYPE_AGGR_TGID:
+ /* Fall through */
+ case TASKSTATS_TYPE_AGGR_PID:
+ aggr_len = NLA_PAYLOAD(na->nla_len);
+ len2 = 0;
+ /* For nested attributes, na follows */
+ na = (struct nlattr *) NLA_DATA(na);
+ done = 0;
+ while (len2 < aggr_len) {
+ switch (na->nla_type) {
+ case TASKSTATS_TYPE_PID:
+ rtid = *(int *) NLA_DATA(na);
+ if (print_delays)
+ printf("PID\t%d\n", rtid);
+ break;
+ case TASKSTATS_TYPE_TGID:
+ rtid = *(int *) NLA_DATA(na);
+ if (print_delays)
+ printf("TGID\t%d\n", rtid);
+ break;
+ case TASKSTATS_TYPE_STATS:
+ count++;
+ if (print_delays)
+ print_delayacct((struct taskstats *) NLA_DATA(na));
+ if (fd) {
+ if (write(fd, NLA_DATA(na), na->nla_len) < 0) {
+ err(1,"write error\n");
+ }
+ }
+ if (!loop)
+ goto done;
+ break;
+ default:
+ printf("Unknown nested nla_type %d\n", na->nla_type);
+ break;
+ }
+ len2 += NLA_ALIGN(na->nla_len);
+ na = (struct nlattr *) ((char *) na + len2);
+ }
+ break;
+
+ default:
+ printf("Unknown nla_type %d\n", na->nla_type);
+ break;
+ }
+ na = (struct nlattr *) (GENLMSG_DATA(&msg) + len);
+ }
+ } while (loop);
+done:
+ if (maskset) {
+ rc = send_cmd(nl_sd, id, mypid, TASKSTATS_CMD_GET,
+ TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK,
+ &cpumask, sizeof(cpumask));
+ printf("Sent deregister mask, retval %d\n", rc);
+ if (rc < 0)
+ err(rc, "error sending deregister cpumask\n");
+ }
+err:
+ close(nl_sd);
+ if (fd)
+ close(fd);
+ return 0;
+}
--- /dev/null
+Per-task statistics interface
+-----------------------------
+
+
+Taskstats is a netlink-based interface for sending per-task and
+per-process statistics from the kernel to userspace.
+
+Taskstats was designed for the following benefits:
+
+- efficiently provide statistics during lifetime of a task and on its exit
+- unified interface for multiple accounting subsystems
+- extensibility for use by future accounting patches
+
+Terminology
+-----------
+
+"pid", "tid" and "task" are used interchangeably and refer to the standard
+Linux task defined by struct task_struct. per-pid stats are the same as
+per-task stats.
+
+"tgid", "process" and "thread group" are used interchangeably and refer to the
+tasks that share an mm_struct i.e. the traditional Unix process. Despite the
+use of tgid, there is no special treatment for the task that is thread group
+leader - a process is deemed alive as long as it has any task belonging to it.
+
+Usage
+-----
+
+To get statistics during a task's lifetime, userspace opens a unicast netlink
+socket (NETLINK_GENERIC family) and sends commands specifying a pid or a tgid.
+The response contains statistics for a task (if pid is specified) or the sum of
+statistics for all tasks of the process (if tgid is specified).
+
+To obtain statistics for tasks which are exiting, the userspace listener
+sends a register command and specifies a cpumask. Whenever a task exits on
+one of the cpus in the cpumask, its per-pid statistics are sent to the
+registered listener. Using cpumasks allows the data received by one listener
+to be limited and assists in flow control over the netlink interface and is
+explained in more detail below.
+
+If the exiting task is the last thread exiting its thread group,
+an additional record containing the per-tgid stats is also sent to userspace.
+The latter contains the sum of per-pid stats for all threads in the thread
+group, both past and present.
+
+getdelays.c is a simple utility demonstrating usage of the taskstats interface
+for reporting delay accounting statistics. Users can register cpumasks,
+send commands and process responses, listen for per-tid/tgid exit data,
+write the data received to a file and do basic flow control by increasing
+receive buffer sizes.
+
+Interface
+---------
+
+The user-kernel interface is encapsulated in include/linux/taskstats.h
+
+To avoid this documentation becoming obsolete as the interface evolves, only
+an outline of the current version is given. taskstats.h always overrides the
+description here.
+
+struct taskstats is the common accounting structure for both per-pid and
+per-tgid data. It is versioned and can be extended by each accounting subsystem
+that is added to the kernel. The fields and their semantics are defined in the
+taskstats.h file.
+
+The data exchanged between user and kernel space is a netlink message belonging
+to the NETLINK_GENERIC family and using the netlink attributes interface.
+The messages are in the format
+
+ +----------+- - -+-------------+-------------------+
+ | nlmsghdr | Pad | genlmsghdr | taskstats payload |
+ +----------+- - -+-------------+-------------------+
+
+
+The taskstats payload is one of the following three kinds:
+
+1. Commands: Sent from user to kernel. Commands to get data on
+a pid/tgid consist of one attribute, of type TASKSTATS_CMD_ATTR_PID/TGID,
+containing a u32 pid or tgid in the attribute payload. The pid/tgid denotes
+the task/process for which userspace wants statistics.
+
+Commands to register/deregister interest in exit data from a set of cpus
+consist of one attribute, of type
+TASKSTATS_CMD_ATTR_REGISTER/DEREGISTER_CPUMASK and contain a cpumask in the
+attribute payload. The cpumask is specified as an ascii string of
+comma-separated cpu ranges e.g. to listen to exit data from cpus 1,2,3,5,7,8
+the cpumask would be "1-3,5,7-8". If userspace forgets to deregister interest
+in cpus before closing the listening socket, the kernel cleans up its interest
+set over time. However, for the sake of efficiency, an explicit deregistration
+is advisable.
+
+2. Response for a command: sent from the kernel in response to a userspace
+command. The payload is a series of three attributes of type:
+
+a) TASKSTATS_TYPE_AGGR_PID/TGID : attribute containing no payload but indicates
+a pid/tgid will be followed by some stats.
+
+b) TASKSTATS_TYPE_PID/TGID: attribute whose payload is the pid/tgid whose stats
+is being returned.
+
+c) TASKSTATS_TYPE_STATS: attribute with a struct taskstsats as payload. The
+same structure is used for both per-pid and per-tgid stats.
+
+3. New message sent by kernel whenever a task exits. The payload consists of a
+ series of attributes of the following type:
+
+a) TASKSTATS_TYPE_AGGR_PID: indicates next two attributes will be pid+stats
+b) TASKSTATS_TYPE_PID: contains exiting task's pid
+c) TASKSTATS_TYPE_STATS: contains the exiting task's per-pid stats
+d) TASKSTATS_TYPE_AGGR_TGID: indicates next two attributes will be tgid+stats
+e) TASKSTATS_TYPE_TGID: contains tgid of process to which task belongs
+f) TASKSTATS_TYPE_STATS: contains the per-tgid stats for exiting task's process
+
+
+per-tgid stats
+--------------
+
+Taskstats provides per-process stats, in addition to per-task stats, since
+resource management is often done at a process granularity and aggregating task
+stats in userspace alone is inefficient and potentially inaccurate (due to lack
+of atomicity).
+
+However, maintaining per-process, in addition to per-task stats, within the
+kernel has space and time overheads. To address this, the taskstats code
+accumalates each exiting task's statistics into a process-wide data structure.
+When the last task of a process exits, the process level data accumalated also
+gets sent to userspace (along with the per-task data).
+
+When a user queries to get per-tgid data, the sum of all other live threads in
+the group is added up and added to the accumalated total for previously exited
+threads of the same thread group.
+
+Extending taskstats
+-------------------
+
+There are two ways to extend the taskstats interface to export more
+per-task/process stats as patches to collect them get added to the kernel
+in future:
+
+1. Adding more fields to the end of the existing struct taskstats. Backward
+ compatibility is ensured by the version number within the
+ structure. Userspace will use only the fields of the struct that correspond
+ to the version its using.
+
+2. Defining separate statistic structs and using the netlink attributes
+ interface to return them. Since userspace processes each netlink attribute
+ independently, it can always ignore attributes whose type it does not
+ understand (because it is using an older version of the interface).
+
+
+Choosing between 1. and 2. is a matter of trading off flexibility and
+overhead. If only a few fields need to be added, then 1. is the preferable
+path since the kernel and userspace don't need to incur the overhead of
+processing new netlink attributes. But if the new fields expand the existing
+struct too much, requiring disparate userspace accounting utilities to
+unnecessarily receive large structures whose fields are of no interest, then
+extending the attributes structure would be worthwhile.
+
+Flow control for taskstats
+--------------------------
+
+When the rate of task exits becomes large, a listener may not be able to keep
+up with the kernel's rate of sending per-tid/tgid exit data leading to data
+loss. This possibility gets compounded when the taskstats structure gets
+extended and the number of cpus grows large.
+
+To avoid losing statistics, userspace should do one or more of the following:
+
+- increase the receive buffer sizes for the netlink sockets opened by
+listeners to receive exit data.
+
+- create more listeners and reduce the number of cpus being listened to by
+each listener. In the extreme case, there could be one listener for each cpu.
+Users may also consider setting the cpu affinity of the listener to the subset
+of cpus to which it listens, especially if they are listening to just one cpu.
+
+Despite these measures, if the userspace receives ENOBUFS error messages
+indicated overflow of receive buffers, it should take measures to handle the
+loss of data.
+
+----
to generate parity. Some vendors do not do this, and thus the parity bit
can "float" giving false positives.
-The PCI Parity EDAC device has the ability to "skip" known flaky
-cards during the parity scan. These are set by the parity "blacklist"
-interface in the sysfs for PCI Parity. (See the PCI section in the sysfs
-section below.) There is also a parity "whitelist" which is used as
-an explicit list of devices to scan, while the blacklist is a list
-of devices to skip.
+[There are patches in the kernel queue which will allow for storage of
+quirks of PCI devices reporting false parity positives. The 2.6.18
+kernel should have those patches included. When that becomes available,
+then EDAC will be patched to utilize that information to "skip" such
+devices.]
-EDAC will have future error detectors that will be added or integrated
-into EDAC in the following list:
+EDAC will have future error detectors that will be integrated with
+EDAC or added to it, in the following list:
MCE Machine Check Exception
MCA Machine Check Architecture
there currently reside 2 'edac' components:
mc memory controller(s) system
- pci PCI status system
+ pci PCI control and status system
============================================================================
Memory Controller (mc) Model
First a background on the memory controller's model abstracted in EDAC.
-Each mc device controls a set of DIMM memory modules. These modules are
+Each 'mc' device controls a set of DIMM memory modules. These modules are
laid out in a Chip-Select Row (csrowX) and Channel table (chX). There can
-be multiple csrows and two channels.
+be multiple csrows and multiple channels.
Memory controllers allow for several csrows, with 8 csrows being a typical value.
Yet, the actual number of csrows depends on the electrical "loading"
of a given motherboard, memory controller and DIMM characteristics.
Dual channels allows for 128 bit data transfers to the CPU from memory.
+Some newer chipsets allow for more than 2 channels, like Fully Buffered DIMMs
+(FB-DIMMs). The following example will assume 2 channels:
Channel 0 Channel 1
The time period, in milliseconds, for polling for error information.
Too small a value wastes resources. Too large a value might delay
necessary handling of errors and might loose valuable information for
- locating the error. 1000 milliseconds (once each second) is about
- right for most uses.
+ locating the error. 1000 milliseconds (once each second) is the current
+ default. Systems which require all the bandwidth they can get, may
+ increase this.
LOAD TIME: module/kernel parameter: poll_msec=[0|1]
RUN TIME: echo "1000" >/sys/devices/system/edac/mc/poll_msec
-Module Version read-only attribute file:
-
- 'mc_version'
-
- The EDAC CORE module's version and compile date are shown here to
- indicate what EDAC is running.
-
-
-
============================================================================
'mcX' DIRECTORIES
-DIMM capability attribute file:
-
- 'edac_capability'
-
- The EDAC (Error Detection and Correction) capabilities/modes of
- the memory controller hardware.
-
-
-DIMM Current Capability attribute file:
-
- 'edac_current_capability'
-
- The EDAC capabilities available with the hardware
- configuration. This may not be the same as "EDAC capability"
- if the correct memory is not used. If a memory controller is
- capable of EDAC, but DIMMs without check bits are in use, then
- Parity, SECDED, S4ECD4ED capabilities will not be available
- even though the memory controller might be capable of those
- modes with the proper memory loaded.
-
-
-Memory Type supported on this controller attribute file:
-
- 'supported_mem_type'
-
- This attribute file displays the memory type, usually
- buffered and unbuffered DIMMs.
-
-
Memory Controller name attribute file:
'mc_name'
that is being utilized.
-Memory Controller Module name attribute file:
-
- 'module_name'
-
- This attribute file displays the memory controller module name,
- version and date built. The name of the memory controller
- hardware - some drivers work with multiple controllers and
- this field shows which hardware is present.
-
-
Total memory managed by this memory controller attribute file:
'size_mb'
This attribute file will display what type of memory is currently
on this csrow. Normally, either buffered or unbuffered memory.
+ Examples:
+ Registered-DDR
+ Unbuffered-DDR
EDAC Mode of operation attribute file:
'dev_type'
- This attribute file will display what type of DIMM device is
- being utilized. Example: x4
+ This attribute file will display what type of DRAM device is
+ being utilized on this DIMM.
+ Examples:
+ x1
+ x2
+ x4
+ x8
Channel 0 CE Count attribute file:
If logging for UEs and CEs are enabled then system logs will have
error notices indicating errors that have been detected:
-MC0: CE page 0x283, offset 0xce0, grain 8, syndrome 0x6ec3, row 0,
+EDAC MC0: CE page 0x283, offset 0xce0, grain 8, syndrome 0x6ec3, row 0,
channel 1 "DIMM_B1": amd76x_edac
-MC0: CE page 0x1e5, offset 0xfb0, grain 8, syndrome 0xb741, row 0,
+EDAC MC0: CE page 0x1e5, offset 0xfb0, grain 8, syndrome 0xb741, row 0,
channel 1 "DIMM_B1": amd76x_edac
-PCI Device Whitelist:
-
- 'pci_parity_whitelist'
-
- This control file allows for an explicit list of PCI devices to be
- scanned for parity errors. Only devices found on this list will
- be examined. The list is a line of hexadecimal VENDOR and DEVICE
- ID tuples:
-
- 1022:7450,1434:16a6
-
- One or more can be inserted, separated by a comma.
-
- To write the above list doing the following as one command line:
-
- echo "1022:7450,1434:16a6"
- > /sys/devices/system/edac/pci/pci_parity_whitelist
-
-
-
- To display what the whitelist is, simply 'cat' the same file.
-
-
-PCI Device Blacklist:
-
- 'pci_parity_blacklist'
-
- This control file allows for a list of PCI devices to be
- skipped for scanning.
- The list is a line of hexadecimal VENDOR and DEVICE ID tuples:
-
- 1022:7450,1434:16a6
-
- One or more can be inserted, separated by a comma.
-
- To write the above list doing the following as one command line:
-
- echo "1022:7450,1434:16a6"
- > /sys/devices/system/edac/pci/pci_parity_blacklist
-
-
- To display what the whitelist currently contains,
- simply 'cat' the same file.
-
=======================================================================
-
-PCI Vendor and Devices IDs can be obtained with the lspci command. Using
-the -n option lspci will display the vendor and device IDs. The system
-administrator will have to determine which devices should be scanned or
-skipped.
-
-
-
-The two lists (white and black) are prioritized. blacklist is the lower
-priority and will NOT be utilized when a whitelist has been set.
-Turn OFF a whitelist by an empty echo command:
-
- echo > /sys/devices/system/edac/pci/pci_parity_whitelist
-
-and any previous blacklist will be utilized.
-
---------------------------
-What: remove EXPORT_SYMBOL(insert_resource)
-When: April 2006
-Files: kernel/resource.c
-Why: No modular usage in the kernel.
-Who: Adrian Bunk <bunk@stusta.de>
-
----------------------------
-
What: PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
When: November 2005
Files: drivers/pcmcia/: pcmcia_ioctl.c
---------------------------
-What: remove EXPORT_SYMBOL(tasklist_lock)
-When: August 2006
-Files: kernel/fork.c
-Why: tasklist_lock protects the kernel internal task list. Modules have
- no business looking at it, and all instances in drivers have been due
- to use of too-lowlevel APIs. Having this symbol exported prevents
- moving to more scalable locking schemes for the task list.
-Who: Christoph Hellwig <hch@lst.de>
-
----------------------------
-
What: mount/umount uevents
When: February 2007
Why: These events are not correct, and do not properly let userspace know
Who: Thomas Gleixner <tglx@linutronix.de>
---------------------------
+
+What: i2c-ite and i2c-algo-ite drivers
+When: September 2006
+Why: These drivers never compiled since they were added to the kernel
+ tree 5 years ago. This feature removal can be reevaluated if
+ someone shows interest in the drivers, fixes them and takes over
+ maintenance.
+ http://marc.theaimsgroup.com/?l=linux-mips&m=115040510817448
+Who: Jean Delvare <khali@linux-fr.org>
+
+---------------------------
--------------------------- file_system_type ---------------------------
prototypes:
- struct int (*get_sb) (struct file_system_type *, int,
- const char *, void *, struct vfsmount *);
+ int (*get_sb) (struct file_system_type *, int,
+ const char *, void *, struct vfsmount *);
void (*kill_sb) (struct super_block *);
locking rules:
may block BKL
struct file_system_type {
const char *name;
int fs_flags;
- struct int (*get_sb) (struct file_system_type *, int,
- const char *, void *, struct vfsmount *);
+ int (*get_sb) (struct file_system_type *, int,
+ const char *, void *, struct vfsmount *);
void (*kill_sb) (struct super_block *);
struct module *owner;
struct file_system_type * next;
=======================
Supported chips:
- * Abit uGuru (Hardware Monitor part only)
+ * Abit uGuru revision 1-3 (Hardware Monitor part only)
Prefix: 'abituguru'
Addresses scanned: ISA 0x0E0
Datasheet: Not available, this driver is based on reverse engineering.
A "Datasheet" has been written based on the reverse engineering it
should be available in the same dir as this file under the name
abituguru-datasheet.
+ Note:
+ The uGuru is a microcontroller with onboard firmware which programs
+ it to behave as a hwmon IC. There are many different revisions of the
+ firmware and thus effectivly many different revisions of the uGuru.
+ Below is an incomplete list with which revisions are used for which
+ Motherboards:
+ uGuru 1.00 ~ 1.24 (AI7, KV8-MAX3, AN7) (1)
+ uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
+ uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
+ uGuru 2.2.0.0 ~ 2.2.0.6 (AA8 Fatal1ty)
+ uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
+ uGuru 3.0.0.0 ~ 3.0.1.2 (AW8, AL8, NI8)
+ uGuru 4.xxxxx? (AT8 32X) (2)
+ 1) For revisions 2 and 3 uGuru's the driver can autodetect the
+ sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's
+ this doesnot always work. For these uGuru's the autodection can
+ be overriden with the bank1_types module param. For all 3 known
+ revison 1 motherboards the correct use of this param is:
+ bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
+ You may also need to specify the fan_sensors option for these boards
+ fan_sensors=5
+ 2) The current version of the abituguru driver is known to NOT work
+ on these Motherboards
Authors:
Hans de Goede <j.w.r.degoede@hhs.nl>,
* force: bool Force detection. Note this parameter only causes the
detection to be skipped, if the uGuru can't be read
the module initialization (insmod) will still fail.
+* bank1_types: int[] Bank1 sensortype autodetection override:
+ -1 autodetect (default)
+ 0 volt sensor
+ 1 temp sensor
+ 2 not connected
* fan_sensors: int Tell the driver how many fan speed sensors there are
on your motherboard. Default: 0 (autodetect).
* pwms: int Tell the driver how many fan speed controls (fan
* verbose: int How verbose should the driver be? (0-3):
0 normal output
1 + verbose error reporting
- 2 + sensors type probing info\n"
+ 2 + sensors type probing info (default)
3 + retryable error reporting
Default: 2 (the driver is still in the testing phase)
chipsets as well: 635, and 635T. If anyone owns a board with those chips
AND is willing to risk crashing & burning an otherwise well-behaved kernel
in the name of progress... please contact me at <mhoffman@lightlink.com> or
-via the project's mailing list: <lm-sensors@lm-sensors.org>. Please
-send bug reports and/or success stories as well.
+via the project's mailing list: <i2c@lm-sensors.org>. Please send bug
+reports and/or success stories as well.
TO DOs
Format: <area>[,<node>]
See also Documentation/networking/decnet.txt.
+ delayacct [KNL] Enable per-task delay accounting
+
dhash_entries= [KNL]
Set number of hash buckets for dentry cache.
There are some more advanced barrier functions:
(*) set_mb(var, value)
- (*) set_wmb(var, value)
- These assign the value to the variable and then insert at least a write
- barrier after it, depending on the function. They aren't guaranteed to
+ This assigns the value to the variable and then inserts at least a write
+ barrier after it, depending on the function. It isn't guaranteed to
insert anything more than a compiler barrier in a UP compilation.
1. (optional) set up RTC routines
2. (optional) calibrate and set the mips_counter_frequency
- b) board_timer_setup - a function pointer. Invoked at the end of time_init()
+ b) plat_timer_setup - a function pointer. Invoked at the end of time_init()
1. (optional) over-ride any decisions made in time_init()
2. set up the irqaction for timer interrupt.
3. enable the timer interrupt
If you supply board_time_init(), set the function poointer.
- Set the function pointer board_timer_setup() (mandatory)
-
-Step 3: implement rtc routines, board_time_init() and board_timer_setup()
+Step 3: implement rtc routines, board_time_init() and plat_timer_setup()
if needed.
- board_time_init() -
+ board_time_init() -
a) (optional) set up RTC routines,
b) (optional) calibrate and set the mips_counter_frequency
(only needed if you intended to use fixed_rate_gettimeoffset
or use cpu counter as timer interrupt source)
- board_timer_setup() -
+ plat_timer_setup() -
a) (optional) over-write any choices made above by time_init().
b) machine specific code should setup the timer irqaction.
c) enable the timer interrupt
Written 1996 by Gero Kuhlmann <gero@gkminix.han.de>
Updated 1997 by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
Updated 2006 by Nico Schottelius <nico-kernel-nfsroot@schottelius.org>
+Updated 2006 by Horms <horms@verge.net.au>
-If you want to use a diskless system, as an X-terminal or printer
-server for example, you have to put your root filesystem onto a
-non-disk device. This can either be a ramdisk (see initrd.txt in
-this directory for further information) or a filesystem mounted
-via NFS. The following text describes on how to use NFS for the
-root filesystem. For the rest of this text 'client' means the
+In order to use a diskless system, such as an X-terminal or printer server
+for example, it is necessary for the root filesystem to be present on a
+non-disk device. This may be an initramfs (see Documentation/filesystems/
+ramfs-rootfs-initramfs.txt), a ramdisk (see Documenation/initrd.txt) or a
+filesystem mounted via NFS. The following text describes on how to use NFS
+for the root filesystem. For the rest of this text 'client' means the
diskless system, and 'server' means the NFS server.
1.) Enabling nfsroot capabilities
-----------------------------
-In order to use nfsroot you have to select support for NFS during
-kernel configuration. Note that NFS cannot be loaded as a module
-in this case. The configuration script will then ask you whether
-you want to use nfsroot, and if yes what kind of auto configuration
-system you want to use. Selecting both BOOTP and RARP is safe.
+In order to use nfsroot, NFS client support needs to be selected as
+built-in during configuration. Once this has been selected, the nfsroot
+option will become available, which should also be selected.
+
+In the networking options, kernel level autoconfiguration can be selected,
+along with the types of autoconfiguration to support. Selecting all of
+DHCP, BOOTP and RARP is safe.
2.) Kernel command line
-------------------
-When the kernel has been loaded by a boot loader (either by loadlin,
-LILO or a network boot program) it has to be told what root fs device
-to use, and where to find the server and the name of the directory
-on the server to mount as root. This can be established by a couple
-of kernel command line parameters:
+When the kernel has been loaded by a boot loader (see below) it needs to be
+told what root fs device to use. And in the case of nfsroot, where to find
+both the server and the name of the directory on the server to mount as root.
+This can be established using the following kernel command line parameters:
root=/dev/nfs
nfsroot=[<server-ip>:]<root-dir>[,<nfs-options>]
- If the `nfsroot' parameter is NOT given on the command line, the default
- "/tftpboot/%s" will be used.
+ If the `nfsroot' parameter is NOT given on the command line,
+ the default "/tftpboot/%s" will be used.
- <server-ip> Specifies the IP address of the NFS server. If this field
- is not given, the default address as determined by the
- `ip' variable (see below) is used. One use of this
- parameter is for example to allow using different servers
- for RARP and NFS. Usually you can leave this blank.
+ <server-ip> Specifies the IP address of the NFS server.
+ The default address is determined by the `ip' parameter
+ (see below). This parameter allows the use of different
+ servers for IP autoconfiguration and NFS.
- <root-dir> Name of the directory on the server to mount as root. If
- there is a "%s" token in the string, the token will be
- replaced by the ASCII-representation of the client's IP
- address.
+ <root-dir> Name of the directory on the server to mount as root.
+ If there is a "%s" token in the string, it will be
+ replaced by the ASCII-representation of the client's
+ IP address.
<nfs-options> Standard NFS options. All options are separated by commas.
- If the options field is not given, the following defaults
- will be used:
+ The following defaults are used:
port = as given by server portmap daemon
rsize = 1024
wsize = 1024
ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
This parameter tells the kernel how to configure IP addresses of devices
- and also how to set up the IP routing table. It was originally called `nfsaddrs',
- but now the boot-time IP configuration works independently of NFS, so it
- was renamed to `ip' and the old name remained as an alias for compatibility
- reasons.
+ and also how to set up the IP routing table. It was originally called
+ `nfsaddrs', but now the boot-time IP configuration works independently of
+ NFS, so it was renamed to `ip' and the old name remained as an alias for
+ compatibility reasons.
If this parameter is missing from the kernel command line, all fields are
assumed to be empty, and the defaults mentioned below apply. In general
- this means that the kernel tries to configure everything using both
- RARP and BOOTP (depending on what has been enabled during kernel confi-
- guration, and if both what protocol answer got in first).
+ this means that the kernel tries to configure everything using
+ autoconfiguration.
+
+ The <autoconf> parameter can appear alone as the value to the `ip'
+ parameter (without all the ':' characters before) in which case auto-
+ configuration is used.
+
+ <client-ip> IP address of the client.
- <client-ip> IP address of the client. If empty, the address will either
- be determined by RARP or BOOTP. What protocol is used de-
- pends on what has been enabled during kernel configuration
- and on the <autoconf> parameter. If this parameter is not
- empty, neither RARP nor BOOTP will be used.
+ Default: Determined using autoconfiguration.
<server-ip> IP address of the NFS server. If RARP is used to determine
the client address and this parameter is NOT empty only
- replies from the specified server are accepted. To use
- different RARP and NFS server, specify your RARP server
- here (or leave it blank), and specify your NFS server in
- the `nfsroot' parameter (see above). If this entry is blank
- the address of the server is used which answered the RARP
- or BOOTP request.
-
- <gw-ip> IP address of a gateway if the server is on a different
- subnet. If this entry is empty no gateway is used and the
- server is assumed to be on the local network, unless a
- value has been received by BOOTP.
-
- <netmask> Netmask for local network interface. If this is empty,
+ replies from the specified server are accepted.
+
+ Only required for for NFS root. That is autoconfiguration
+ will not be triggered if it is missing and NFS root is not
+ in operation.
+
+ Default: Determined using autoconfiguration.
+ The address of the autoconfiguration server is used.
+
+ <gw-ip> IP address of a gateway if the server is on a different subnet.
+
+ Default: Determined using autoconfiguration.
+
+ <netmask> Netmask for local network interface. If unspecified
the netmask is derived from the client IP address assuming
- classful addressing, unless overridden in BOOTP reply.
+ classful addressing.
- <hostname> Name of the client. If empty, the client IP address is
- used in ASCII notation, or the value received by BOOTP.
+ Default: Determined using autoconfiguration.
- <device> Name of network device to use. If this is empty, all
- devices are used for RARP and BOOTP requests, and the
- first one we receive a reply on is configured. If you have
- only one device, you can safely leave this blank.
+ <hostname> Name of the client. May be supplied by autoconfiguration,
+ but its absence will not trigger autoconfiguration.
- <autoconf> Method to use for autoconfiguration. If this is either
- 'rarp' or 'bootp', the specified protocol is used.
- If the value is 'both' or empty, both protocols are used
- so far as they have been enabled during kernel configura-
- tion. 'off' means no autoconfiguration.
+ Default: Client IP address is used in ASCII notation.
- The <autoconf> parameter can appear alone as the value to the `ip'
- parameter (without all the ':' characters before) in which case auto-
- configuration is used.
+ <device> Name of network device to use.
+
+ Default: If the host only has one device, it is used.
+ Otherwise the device is determined using
+ autoconfiguration. This is done by sending
+ autoconfiguration requests out of all devices,
+ and using the device that received the first reply.
+ <autoconf> Method to use for autoconfiguration. In the case of options
+ which specify multiple autoconfiguration protocols,
+ requests are sent using all protocols, and the first one
+ to reply is used.
+ Only autoconfiguration protocols that have been compiled
+ into the kernel will be used, regardless of the value of
+ this option.
+ off or none: don't use autoconfiguration (default)
+ on or any: use any protocol available in the kernel
+ dhcp: use DHCP
+ bootp: use BOOTP
+ rarp: use RARP
+ both: use both BOOTP and RARP but not DHCP
+ (old option kept for backwards compatibility)
-3.) Kernel loader
- -------------
+ Default: any
-To get the kernel into memory different approaches can be used. They
-depend on what facilities are available:
-3.1) Writing the kernel onto a floppy using dd:
- As always you can just write the kernel onto a floppy using dd,
- but then it's not possible to use kernel command lines at all.
- To substitute the 'root=' parameter, create a dummy device on any
- linux system with major number 0 and minor number 255 using mknod:
- mknod /dev/boot255 c 0 255
+3.) Boot Loader
+ ----------
- Then copy the kernel zImage file onto a floppy using dd:
+To get the kernel into memory different approaches can be used.
+They depend on various facilities being available:
- dd if=/usr/src/linux/arch/i386/boot/zImage of=/dev/fd0
- And finally use rdev to set the root device:
+3.1) Booting from a floppy using syslinux
- rdev /dev/fd0 /dev/boot255
+ When building kernels, an easy way to create a boot floppy that uses
+ syslinux is to use the zdisk or bzdisk make targets which use
+ and bzimage images respectively. Both targets accept the
+ FDARGS parameter which can be used to set the kernel command line.
- You can then remove the dummy device /dev/boot255 again. There
- is no real device available for it.
- The other two kernel command line parameters cannot be substi-
- tuted with rdev. Therefore, using this method the kernel will
- by default use RARP and/or BOOTP, and if it gets an answer via
- RARP will mount the directory /tftpboot/<client-ip>/ as its
- root. If it got a BOOTP answer the directory name in that answer
- is used.
+ e.g.
+ make bzdisk FDARGS="root=/dev/nfs"
+
+ Note that the user running this command will need to have
+ access to the floppy drive device, /dev/fd0
+
+ For more information on syslinux, including how to create bootdisks
+ for prebuilt kernels, see http://syslinux.zytor.com/
+
+ N.B: Previously it was possible to write a kernel directly to
+ a floppy using dd, configure the boot device using rdev, and
+ boot using the resulting floppy. Linux no longer supports this
+ method of booting.
+
+3.2) Booting from a cdrom using isolinux
+
+ When building kernels, an easy way to create a bootable cdrom that
+ uses isolinux is to use the isoimage target which uses a bzimage
+ image. Like zdisk and bzdisk, this target accepts the FDARGS
+ parameter which can be used to set the kernel command line.
+
+ e.g.
+ make isoimage FDARGS="root=/dev/nfs"
+
+ The resulting iso image will be arch/<ARCH>/boot/image.iso
+ This can be written to a cdrom using a variety of tools including
+ cdrecord.
+
+ e.g.
+ cdrecord dev=ATAPI:1,0,0 arch/i386/boot/image.iso
+
+ For more information on isolinux, including how to create bootdisks
+ for prebuilt kernels, see http://syslinux.zytor.com/
3.2) Using LILO
- When using LILO you can specify all necessary command line
- parameters with the 'append=' command in the LILO configuration
- file. However, to use the 'root=' command you also need to
- set up a dummy device as described in 3.1 above. For how to use
- LILO and its 'append=' command please refer to the LILO
- documentation.
+ When using LILO all the necessary command line parameters may be
+ specified using the 'append=' directive in the LILO configuration
+ file.
+
+ However, to use the 'root=' directive you also need to create
+ a dummy root device, which may be removed after LILO is run.
+
+ mknod /dev/boot255 c 0 255
+
+ For information on configuring LILO, please refer to its documentation.
3.3) Using GRUB
- When you use GRUB, you simply append the parameters after the kernel
- specification: "kernel <kernel> <parameters>" (without the quotes).
+ When using GRUB, kernel parameter are simply appended after the kernel
+ specification: kernel <kernel> <parameters>
3.4) Using loadlin
- When you want to boot Linux from a DOS command prompt without
- having a local hard disk to mount as root, you can use loadlin.
- I was told that it works, but haven't used it myself yet. In
- general you should be able to create a kernel command line simi-
- lar to how LILO is doing it. Please refer to the loadlin docu-
- mentation for further information.
+ loadlin may be used to boot Linux from a DOS command prompt without
+ requiring a local hard disk to mount as root. This has not been
+ thoroughly tested by the authors of this document, but in general
+ it should be possible configure the kernel command line similarly
+ to the configuration of LILO.
+
+ Please refer to the loadlin documentation for further information.
3.5) Using a boot ROM
- This is probably the most elegant way of booting a diskless
- client. With a boot ROM the kernel gets loaded using the TFTP
- protocol. As far as I know, no commercial boot ROMs yet
- support booting Linux over the network, but there are two
- free implementations of a boot ROM available on sunsite.unc.edu
- and its mirrors. They are called 'netboot-nfs' and 'etherboot'.
- Both contain everything you need to boot a diskless Linux client.
+ This is probably the most elegant way of booting a diskless client.
+ With a boot ROM the kernel is loaded using the TFTP protocol. The
+ authors of this document are not aware of any no commercial boot
+ ROMs that support booting Linux over the network. However, there
+ are two free implementations of a boot ROM, netboot-nfs and
+ etherboot, both of which are available on sunsite.unc.edu, and both
+ of which contain everything you need to boot a diskless Linux client.
3.6) Using pxelinux
- Using pxelinux you specify the kernel you built with
+ Pxelinux may be used to boot linux using the PXE boot loader
+ which is present on many modern network cards.
+
+ When using pxelinux, the kernel image is specified using
"kernel <relative-path-below /tftpboot>". The nfsroot parameters
are passed to the kernel by adding them to the "append" line.
- You may perhaps also want to fine tune the console output,
- see Documentation/serial-console.txt for serial console help.
+ It is common to use serial console in conjunction with pxeliunx,
+ see Documentation/serial-console.txt for more information.
+
+ For more information on isolinux, including how to create bootdisks
+ for prebuilt kernels, see http://syslinux.zytor.com/
1) Overview
2) Kernel Command Line Parameters
3) Using "rdev -r"
- 4) An Example of Creating a Compressed RAM Disk
+ 4) An Example of Creating a Compressed RAM Disk
1) Overview
compatibility reasons, but it may be removed in the future.
The new RAM disk also has the ability to load compressed RAM disk images,
-allowing one to squeeze more programs onto an average installation or
+allowing one to squeeze more programs onto an average installation or
rescue floppy disk.
===================
This parameter tells the RAM disk driver how many bytes to use per block. The
-default is 512.
+default is 1024 (BLOCK_SIZE).
3) Using "rdev -r"
./arch/i386/kernel/setup.c:#define RAMDISK_PROMPT_FLAG 0x8000
./arch/i386/kernel/setup.c:#define RAMDISK_LOAD_FLAG 0x4000
-Consider a typical two floppy disk setup, where you will have the
+Consider a typical two floppy disk setup, where you will have the
kernel on disk one, and have already put a RAM disk image onto disk #2.
Hence you want to set bits 0 to 13 as 0, meaning that your RAM disk
append = "load_ramdisk=1"
-4) An Example of Creating a Compressed RAM Disk
+4) An Example of Creating a Compressed RAM Disk
----------------------------------------------
To create a RAM disk image, you will need a spare block device to
construct it on. This can be the RAM disk device itself, or an
-unused disk partition (such as an unmounted swap partition). For this
+unused disk partition (such as an unmounted swap partition). For this
example, we will use the RAM disk device, "/dev/ram0".
Note: This technique should not be done on a machine with less than 8 MB
}
/* PCI IDs */
- static struct pci_device_id snd_mychip_ids[] __devinitdata = {
+ static struct pci_device_id snd_mychip_ids[] = {
{ PCI_VENDOR_ID_FOO, PCI_DEVICE_ID_BAR,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
....
<informalexample>
<programlisting>
<![CDATA[
- static struct pci_device_id snd_mychip_ids[] __devinitdata = {
+ static struct pci_device_id snd_mychip_ids[] = {
{ PCI_VENDOR_ID_FOO, PCI_DEVICE_ID_BAR,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
....
Prolific PL2303 Driver
- This driver support any device that has the PL2303 chip from Prolific
+ This driver supports any device that has the PL2303 chip from Prolific
in it. This includes a number of single port USB to serial
converters and USB GPS devices. Devices from Aten (the UC-232) and
- IO-Data work with this driver.
+ IO-Data work with this driver, as does the DCU-11 mobile-phone cable.
For any questions or problems with this driver, please contact Greg
Kroah-Hartman at greg@kroah.com
ALI1563 I2C DRIVER
P: Rudolf Marek
M: r.marek@sh.cvut.cz
-L: lm-sensors@lm-sensors.org
+L: i2c@lm-sensors.org
S: Maintained
ALPHA PORT
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
S: Maintained
+CALGARY x86-64 IOMMU
+P: Muli Ben-Yehuda
+M: muli@il.ibm.com
+P: Jon D. Mason
+M: jdmason@us.ibm.com
+L: linux-kernel@vger.kernel.org
+L: discuss@x86-64.org
+S: Maintained
+
COMMON INTERNET FILE SYSTEM (CIFS)
P: Steve French
M: sfrench@samba.org
P: Jamie Lenehan
M: lenehan@twibble.org
W: http://twibble.org/dist/dc395x/
+L: dc395x@twibble.org
L: http://lists.twibble.org/mailman/listinfo/dc395x/
S: Maintained
I2C SUBSYSTEM
P: Jean Delvare
M: khali@linux-fr.org
-L: lm-sensors@lm-sensors.org
+L: i2c@lm-sensors.org
W: http://www.lm-sensors.nu/
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Maintained
M: yi.zhu@intel.com
P: James Ketrenos
M: jketreno@linux.intel.com
+L: ipw2100-devel@lists.sourceforge.net
L: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
W: http://ipw2100.sourceforge.net
S: Supported
M: yi.zhu@intel.com
P: James Ketrenos
M: jketreno@linux.intel.com
+L: ipw2100-devel@lists.sourceforge.net
L: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
W: http://ipw2200.sourceforge.net
S: Supported
OPENCORES I2C BUS DRIVER
P: Peter Korsgaard
M: jacmet@sunsite.dk
-L: lm-sensors@lm-sensors.org
+L: i2c@lm-sensors.org
S: Maintained
ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
+L: linux-pcmcia@lists.infradead.org
L: http://lists.infradead.org/mailman/listinfo/linux-pcmcia
T: git kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
S: Maintained
L: netdev@vger.kernel.org
S: Maintained
+PER-TASK DELAY ACCOUNTING
+P: Shailabh Nagar
+M: nagar@watson.ibm.com
+L: linux-kernel@vger.kernel.org
+S: Maintained
+
PERSONALITY HANDLING
P: Christoph Hellwig
M: hch@infradead.org
L: netdev@vger.kernel.org
S: Maintained
+SOEKRIS NET48XX LED SUPPORT
+P: Chris Boot
+M: bootc@bootc.net
+S: Maintained
+
SPARC (sparc32):
P: William L. Irwin
M: wli@holomorphy.com
M: hch@infradead.org
S: Maintained
+TC CLASSIFIER
+P: Jamal Hadi Salim
+M: hadi@cyberus.ca
+L: netdev@vger.kernel.org
+S: Maintained
+
TI OMAP RANDOM NUMBER GENERATOR SUPPORT
P: Deepak Saxena
M: dsaxena@plexity.net
S: Maintained
+TASKSTATS STATISTICS INTERFACE
+P: Shailabh Nagar
+M: nagar@watson.ibm.com
+L: linux-kernel@vger.kernel.org
+S: Maintained
+
TI PARALLEL LINK CABLE DRIVER
P: Romain Lievin
M: roms@lpg.ticalc.org
VIAPRO SMBUS DRIVER
P: Jean Delvare
M: khali@linux-fr.org
-L: lm-sensors@lm-sensors.org
+L: i2c@lm-sensors.org
S: Maintained
UCLINUX (AND M68KNOMMU)
W1 DALLAS'S 1-WIRE BUS
P: Evgeniy Polyakov
M: johnpol@2ka.mipt.ru
+S: Maintained
+
+W83791D HARDWARE MONITORING DRIVER
+P: Charles Spirakis
+M: bezaur@gmail.com
L: lm-sensors@lm-sensors.org
S: Maintained
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 18
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
NAME=Crazed Snow-Weasel
# *DOCUMENTATION*
#include <linux/in.h>
#include <linux/in6.h>
#include <linux/pci.h>
+#include <linux/screen_info.h>
#include <linux/tty.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/time.h>
#include <linux/major.h>
#include <linux/stat.h>
+#include <linux/vt.h>
#include <linux/mman.h>
#include <linux/elfcore.h>
#include <linux/reboot.h>
#include <linux/slab.h>
#include <linux/user.h>
#include <linux/a.out.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/delay.h>
#include <linux/config.h> /* CONFIG_ALPHA_LCA etc */
#include <linux/mc146818rtc.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/init.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <asm/compiler.h>
#include <asm/ptrace.h>
goto out;
}
- strncpy(dev->dev.bus_id,info->name,sizeof(dev->dev.bus_id));
+ strncpy(dev->dev.bus_id, info->name, sizeof(dev->dev.bus_id));
/*
* If the parent device has a DMA mask associated with it,
* propagate it down to the children.
for (i = 0; i < ARRAY_SIZE(locomo_devices); i++)
locomo_init_one_child(lchip, &locomo_devices[i]);
-
return 0;
out:
val = get_select_val(buff);
dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
- if (val > sharpsl_pm.machinfo->charge_on_temp)
+ if (val > sharpsl_pm.machinfo->charge_on_temp) {
+ printk(KERN_WARNING "Not charging: temperature out of limits.\n");
return -1;
+ }
return 0;
}
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Wed Apr 19 21:21:01 2006
+# Linux kernel version: 2.6.18-rc1
+# Sun Jul 9 15:21:30 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
#
# System Type
#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
CONFIG_ARCH_EP93XX=y
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
#
# Cirrus EP93xx Implementation Options
#
+CONFIG_CRUNCH=y
#
# EP93xx Platforms
#
+CONFIG_MACH_EDB9302=y
+CONFIG_MACH_EDB9315=y
+CONFIG_MACH_EDB9315A=y
CONFIG_MACH_GESBC9312=y
CONFIG_MACH_TS72XX=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
CONFIG_ALIGNMENT_TRAP=y
#
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_TS7250=y
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# I2C Hardware Bus support
#
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_EP93XX=y
+# CONFIG_RTC_DRV_PL031 is not set
# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
# File systems
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_SLAB_LEAK is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Wed Apr 19 21:12:49 2006
+# Linux kernel version: 2.6.18-rc1
+# Sun Jul 9 15:28:50 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
#
# System Type
#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
#
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_WAN=y
# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
-# CONFIG_SYNCLINK_SYNCPPP is not set
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
# CONFIG_HDLC_RAW_ETH is not set
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_IXP2000=y
# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Wed Apr 19 21:13:50 2006
+# Linux kernel version: 2.6.18-rc1
+# Sun Jul 9 14:13:35 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
#
# System Type
#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
CONFIG_ARCH_IXP23XX=y
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
#
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_RESOURCES_64BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_WAN=y
# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
-# CONFIG_SYNCLINK_SYNCPPP is not set
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
# CONFIG_HDLC_RAW_ETH is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-git2
-# Wed Jun 21 22:20:18 2006
+# Linux kernel version: 2.6.18-rc1
+# Sun Jul 9 14:15:23 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_MACH_MAINSTONE is not set
# CONFIG_ARCH_PXA_IDP is not set
# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
CONFIG_PXA27x=y
CONFIG_IWMMXT=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
CONFIG_ALIGNMENT_TRAP=y
#
# Power management options
#
# CONFIG_PM is not set
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
# CONFIG_APM is not set
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-git10
-# Mon Jun 26 13:45:44 2006
+# Linux kernel version: 2.6.18-rc1
+# Sun Jul 9 14:16:20 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_OMAP is not set
#
-# AT91RM9200 Implementations
+# Atmel AT91 System-on-Chip
+#
+
#
+# Atmel AT91 Processors
+#
+CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
#
# AT91RM9200 Board Type
# CONFIG_MACH_CSB337 is not set
# CONFIG_MACH_CSB637 is not set
# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
# CONFIG_MACH_ATEB9200 is not set
+# CONFIG_MACH_KB9200 is not set
# CONFIG_MACH_KAFA is not set
#
-# AT91RM9200 Feature Selections
+# AT91 Feature Selections
#
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
# CONFIG_LEDS_CPU is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
features &= ~(PCI_COMMAND_SERR | PCI_COMMAND_PARITY);
switch (dev->class >> 8) {
-#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
- case PCI_CLASS_BRIDGE_ISA:
- case PCI_CLASS_BRIDGE_EISA:
- /*
- * If this device is an ISA bridge, set isa_bridge
- * to point at this device. We will then go looking
- * for things like keyboard, etc.
- */
- isa_bridge = dev;
- break;
-#endif
case PCI_CLASS_BRIDGE_PCI:
pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status);
status |= PCI_BRIDGE_CTL_PARITY|PCI_BRIDGE_CTL_MASTER_ABORT;
}
#ifdef CONFIG_HOTPLUG_CPU
+
+static void route_irq(struct irqdesc *desc, unsigned int irq, unsigned int cpu)
+{
+ pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->cpu, cpu);
+
+ spin_lock_irq(&desc->lock);
+ desc->chip->set_affinity(irq, cpumask_of_cpu(cpu));
+ spin_unlock_irq(&desc->lock);
+}
+
/*
* The CPU has been marked offline. Migrate IRQs off this CPU. If
* the affinity settings do not allow other CPUs, force them onto any
#include <linux/console.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/init.h>
#include <linux/root_dev.h>
#include <linux/cpu.h>
static struct mcp_plat_data collie_mcp_data = {
- .mccr0 = MCCR0_ADM,
- .sclk_rate = 11981000,
+ .mccr0 = MCCR0_ADM | MCCR0_ExtClk,
+ .sclk_rate = 9216000,
};
#ifdef CONFIG_SHARP_LOCOMO
* Li-ion batteries are angry beasts, and they like to explode. This driver is not finished,
* and sometimes charges them when it should not. If it makes angry lithium to come your way...
* ...well, you have been warned.
+ *
+ * Actually, this should be quite safe, it seems sharp leaves charger enabled by default,
+ * and my collie did not explode (yet).
*/
#include <linux/module.h>
{
int err;
- if (sharpsl_param.adadj != -1) {
+ if (sharpsl_param.adadj != -1)
ad_revise = sharpsl_param.adadj;
- }
/* Register interrupt handler. */
if ((err = request_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr, IRQF_DISABLED,
static void collie_charge(int on)
{
- if (on) {
- printk("Should start charger\n");
- } else {
- printk("Should stop charger\n");
- }
-#ifdef I_AM_SURE
+ extern struct platform_device colliescoop_device;
- /* Zaurus seems to contain LTC1731 ; it should know when to
+ /* Zaurus seems to contain LTC1731; it should know when to
* stop charging itself, so setting charge on should be
* relatively harmless (as long as it is not done too often).
*/
-#define CF_BUF_CTRL_BASE 0xF0800000
-#define SCOOP_REG(adr) (*(volatile unsigned short*)(CF_BUF_CTRL_BASE+(adr)))
-#define SCOOP_REG_GPWR SCOOP_REG(SCOOP_GPWR)
-
if (on) {
set_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON);
} else {
reset_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON);
}
-#endif
}
static void collie_discharge(int on)
ucb1x00_adc_enable(ucb);
- /* Gives 75..130 */
ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_BBAT_ON, 0);
voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC);
ucb1x00_adc_enable(ucb);
ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON);
ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_MBAT_ON, 0);
- /* gives values 160..255 with battery removed... and
- 145..255 with battery inserted. (on AC), goes as low as
- 80 on DC. */
+
+ mdelay(1);
voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC);
ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON);
case SHARPSL_BATT_TEMP:
return collie_read_temp();
case SHARPSL_ACIN_VOLT:
- return 0x1;
+ return 500;
case SHARPSL_STATUS_ACIN: {
int ret = GPLR & COLLIE_GPIO_AC_IN;
printk("AC status = %d\n", ret);
}
}
+struct battery_thresh collie_battery_levels_acin[] = {
+ { 420, 100},
+ { 417, 95},
+ { 415, 90},
+ { 413, 80},
+ { 411, 75},
+ { 408, 70},
+ { 406, 60},
+ { 403, 50},
+ { 398, 40},
+ { 391, 25},
+ { 10, 5},
+ { 0, 0},
+};
+
struct battery_thresh collie_battery_levels[] = {
- { 368, 100},
- { 358, 25},
- { 356, 5},
+ { 394, 100},
+ { 390, 95},
+ { 380, 90},
+ { 370, 80},
+ { 368, 75}, /* From sharp code: battery high with frontlight */
+ { 366, 70}, /* 60..90 -- fake values invented by me for testing */
+ { 364, 60},
+ { 362, 50},
+ { 360, 40},
+ { 358, 25}, /* From sharp code: battery low with frontlight */
+ { 356, 5}, /* From sharp code: battery verylow with frontlight */
{ 0, 0},
};
.postsuspend = collie_postsuspend,
.charger_wakeup = collie_charger_wakeup,
.should_wakeup = collie_should_wakeup,
- .bat_levels = 3,
+ .bat_levels = 12,
.bat_levels_noac = collie_battery_levels,
- .bat_levels_acin = collie_battery_levels,
+ .bat_levels_acin = collie_battery_levels_acin,
.status_high_acin = 368,
.status_low_acin = 358,
.status_high_noac = 368,
.status_low_noac = 358,
+ .charge_on_volt = 350, /* spitz uses 2.90V, but lets play it safe. */
+ .charge_on_temp = 550,
+ .charge_acin_high = 550, /* collie does not seem to have sensor for this, anyway */
+ .charge_acin_low = 450, /* ignored, too */
+ .fatal_acin_volt = 356,
+ .fatal_noacin_volt = 356,
+
+ .batfull_irq = 1, /* We do not want periodical charge restarts */
};
static int __init collie_pm_ucb_add(struct ucb1x00_dev *pdev)
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst307.h>
#include <asm/hardware/vic.h>
+#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco)
{
void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
-#if defined(CONFIG_ARCH_VERSATILE_PB)
- void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC4_OFFSET;
-#elif defined(CONFIG_MACH_VERSATILE_AB)
- void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC1_OFFSET;
-#endif
+ void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSCCLCD_OFFSET;
u32 val;
val = readl(sys_osc) & ~0x7ffff;
/*
* If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
*/
- if (fb->panel == &sanyo_2_5_in) {
+ if (machine_is_versatile_ab() && fb->panel == &sanyo_2_5_in) {
void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
unsigned long ctrl;
/*
* If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
*/
- if (fb->panel == &sanyo_2_5_in) {
+ if (machine_is_versatile_ab() && fb->panel == &sanyo_2_5_in) {
void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
unsigned long ctrl;
u16 __padding;
#endif
u64 low;
-} floatx80;
+} __attribute__ ((packed,aligned(4))) floatx80;
/*
-------------------------------------------------------------------------------
#include <linux/console.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/init.h>
#include <linux/root_dev.h>
static int eeprom_open(struct inode * inode, struct file * file)
{
- if(MINOR(inode->i_rdev) != EEPROM_MINOR_NR)
+ if(iminor(inode) != EEPROM_MINOR_NR)
return -ENXIO;
- if(MAJOR(inode->i_rdev) != EEPROM_MAJOR_NR)
+ if(imajor(inode) != EEPROM_MAJOR_NR)
return -ENXIO;
if( eeprom.size > 0 )
gpio_open(struct inode *inode, struct file *filp)
{
struct gpio_private *priv;
- int p = MINOR(inode->i_rdev);
+ int p = iminor(inode);
if (p > GPIO_MINOR_LAST)
return -EINVAL;
static int cryptocop_open(struct inode *inode, struct file *filp)
{
- int p = MINOR(inode->i_rdev);
+ int p = iminor(inode);
if (p != CRYPTOCOP_MINOR) return -EINVAL;
gpio_open(struct inode *inode, struct file *filp)
{
struct gpio_private *priv;
- int p = MINOR(inode->i_rdev);
+ int p = iminor(inode);
if (p > GPIO_MINOR_LAST)
return -EINVAL;
int
pcf8563_open(struct inode *inode, struct file *filp)
{
- MOD_INC_USE_COUNT;
return 0;
}
int
pcf8563_release(struct inode *inode, struct file *filp)
{
- MOD_DEC_USE_COUNT;
return 0;
}
static int sync_serial_open(struct inode *inode, struct file *file)
{
- int dev = MINOR(inode->i_rdev);
+ int dev = iminor(inode);
sync_port* port;
reg_dma_rw_cfg cfg = {.en = regk_dma_yes};
reg_dma_rw_intr_mask intr_mask = {.data = regk_dma_yes};
static int sync_serial_release(struct inode *inode, struct file *file)
{
- int dev = MINOR(inode->i_rdev);
+ int dev = iminor(inode);
sync_port* port;
if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled)
static unsigned int sync_serial_poll(struct file *file, poll_table *wait)
{
- int dev = MINOR(file->f_dentry->d_inode->i_rdev);
+ int dev = iminor(file->f_dentry->d_inode);
unsigned int mask = 0;
sync_port* port;
DEBUGPOLL( static unsigned int prev_mask = 0; );
unsigned int cmd, unsigned long arg)
{
int return_val = 0;
- int dev = MINOR(file->f_dentry->d_inode->i_rdev);
+ int dev = iminor(file->f_dentry->d_inode);
sync_port* port;
reg_sser_rw_tr_cfg tr_cfg;
reg_sser_rw_rec_cfg rec_cfg;
static ssize_t sync_serial_write(struct file * file, const char * buf,
size_t count, loff_t *ppos)
{
- int dev = MINOR(file->f_dentry->d_inode->i_rdev);
+ int dev = iminor(file->f_dentry->d_inode);
DECLARE_WAITQUEUE(wait, current);
sync_port *port;
unsigned long c, c1;
static ssize_t sync_serial_read(struct file * file, char * buf,
size_t count, loff_t *ppos)
{
- int dev = MINOR(file->f_dentry->d_inode->i_rdev);
+ int dev = iminor(file->f_dentry->d_inode);
int avail;
sync_port *port;
unsigned char* start;
#include <linux/bootmem.h>
#include <asm/pgtable.h>
#include <linux/seq_file.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/utsname.h>
#include <linux/pfn.h>
-/* Dummy asm-offsets.c file. Required by kbuild and ready to be used - hint! */
+/*
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed
+ * to extract and format the required data.
+ */
+
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/personality.h>
+#include <asm/registers.h>
+#include <asm/ucontext.h>
+#include <asm/processor.h>
+#include <asm/thread_info.h>
+#include <asm/gdb-stub.h>
+
+#define DEFINE(sym, val) \
+ asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define DEF_PTREG(sym, reg) \
+ asm volatile("\n->" #sym " %0 offsetof(struct pt_regs, " #reg ")" \
+ : : "i" (offsetof(struct pt_regs, reg)))
+
+#define DEF_IREG(sym, reg) \
+ asm volatile("\n->" #sym " %0 offsetof(struct user_context, " #reg ")" \
+ : : "i" (offsetof(struct user_context, reg)))
+
+#define DEF_FREG(sym, reg) \
+ asm volatile("\n->" #sym " %0 offsetof(struct user_context, " #reg ")" \
+ : : "i" (offsetof(struct user_context, reg)))
+
+#define DEF_0REG(sym, reg) \
+ asm volatile("\n->" #sym " %0 offsetof(struct frv_frame0, " #reg ")" \
+ : : "i" (offsetof(struct frv_frame0, reg)))
+
+#define BLANK() asm volatile("\n->" : : )
+
+#define OFFSET(sym, str, mem) \
+ DEFINE(sym, offsetof(struct str, mem));
+
+void foo(void)
+{
+ /* offsets into the thread_info structure */
+ OFFSET(TI_TASK, thread_info, task);
+ OFFSET(TI_EXEC_DOMAIN, thread_info, exec_domain);
+ OFFSET(TI_FLAGS, thread_info, flags);
+ OFFSET(TI_STATUS, thread_info, status);
+ OFFSET(TI_CPU, thread_info, cpu);
+ OFFSET(TI_PREEMPT_COUNT, thread_info, preempt_count);
+ OFFSET(TI_ADDR_LIMIT, thread_info, addr_limit);
+ OFFSET(TI_RESTART_BLOCK, thread_info, restart_block);
+ BLANK();
+
+ /* offsets into register file storage */
+ DEF_PTREG(REG_PSR, psr);
+ DEF_PTREG(REG_ISR, isr);
+ DEF_PTREG(REG_CCR, ccr);
+ DEF_PTREG(REG_CCCR, cccr);
+ DEF_PTREG(REG_LR, lr);
+ DEF_PTREG(REG_LCR, lcr);
+ DEF_PTREG(REG_PC, pc);
+ DEF_PTREG(REG__STATUS, __status);
+ DEF_PTREG(REG_SYSCALLNO, syscallno);
+ DEF_PTREG(REG_ORIG_GR8, orig_gr8);
+ DEF_PTREG(REG_GNER0, gner0);
+ DEF_PTREG(REG_GNER1, gner1);
+ DEF_PTREG(REG_IACC0, iacc0);
+ DEF_PTREG(REG_TBR, tbr);
+ DEF_PTREG(REG_GR0, tbr);
+ DEFINE(REG__END, sizeof(struct pt_regs));
+ BLANK();
+
+ DEF_0REG(REG_DCR, debug.dcr);
+ DEF_0REG(REG_IBAR0, debug.ibar[0]);
+ DEF_0REG(REG_DBAR0, debug.dbar[0]);
+ DEF_0REG(REG_DBDR00, debug.dbdr[0][0]);
+ DEF_0REG(REG_DBMR00, debug.dbmr[0][0]);
+ BLANK();
+
+ DEF_IREG(__INT_GR0, i.gr[0]);
+ DEF_FREG(__USER_FPMEDIA, f);
+ DEF_FREG(__FPMEDIA_FR0, f.fr[0]);
+ DEF_FREG(__FPMEDIA_FNER0, f.fner[0]);
+ DEF_FREG(__FPMEDIA_MSR0, f.msr[0]);
+ DEF_FREG(__FPMEDIA_ACC0, f.acc[0]);
+ DEF_FREG(__FPMEDIA_ACCG0, f.accg[0]);
+ DEF_FREG(__FPMEDIA_FSR0, f.fsr[0]);
+ BLANK();
+
+ DEFINE(NR_PT_REGS, sizeof(struct pt_regs) / 4);
+ DEFINE(NR_USER_INT_REGS, sizeof(struct user_int_regs) / 4);
+ DEFINE(NR_USER_FPMEDIA_REGS, sizeof(struct user_fpmedia_regs) / 4);
+ DEFINE(NR_USER_CONTEXT, sizeof(struct user_context) / 4);
+ DEFINE(FRV_FRAME0_SIZE, sizeof(struct frv_frame0));
+ BLANK();
+
+ /* offsets into thread_struct */
+ OFFSET(__THREAD_FRAME, thread_struct, frame);
+ OFFSET(__THREAD_CURR, thread_struct, curr);
+ OFFSET(__THREAD_SP, thread_struct, sp);
+ OFFSET(__THREAD_FP, thread_struct, fp);
+ OFFSET(__THREAD_LR, thread_struct, lr);
+ OFFSET(__THREAD_PC, thread_struct, pc);
+ OFFSET(__THREAD_GR16, thread_struct, gr[0]);
+ OFFSET(__THREAD_SCHED_LR, thread_struct, sched_lr);
+ OFFSET(__THREAD_FRAME0, thread_struct, frame0);
+ OFFSET(__THREAD_USER, thread_struct, user);
+ BLANK();
+
+ /* offsets into frv_debug_status */
+ OFFSET(DEBUG_BPSR, frv_debug_status, bpsr);
+ OFFSET(DEBUG_DCR, frv_debug_status, dcr);
+ OFFSET(DEBUG_BRR, frv_debug_status, brr);
+ OFFSET(DEBUG_NMAR, frv_debug_status, nmar);
+ BLANK();
+}
* 2 of the License, or (at your option) any later version.
*/
-#include <linux/sys.h>
#include <linux/linkage.h>
#include <asm/setup.h>
#include <asm/segment.h>
#include <asm/ptrace.h>
+#include <asm/thread_info.h>
#include <asm/spr-regs.h>
#include <asm/errno.h>
#
.section .bss.stack
.globl __break_user_context
- .balign 8192
+ .balign THREAD_SIZE
__break_stack:
- .space (8192 - (USER_CONTEXT_SIZE + REG__DEBUG_XTRA)) & ~7
-__break_stack_tos:
- .space REG__DEBUG_XTRA
-__break_user_context:
- .space USER_CONTEXT_SIZE
+ .space THREAD_SIZE - FRV_FRAME0_SIZE
+__break_frame_0:
+ .space FRV_FRAME0_SIZE
#
# miscellaneous variables
#endif
LEDS 0x1001,gr31
- sethi.p %hi(__break_user_context),gr31
- setlo %lo(__break_user_context),gr31
+ sethi.p %hi(__break_frame_0),gr31
+ setlo %lo(__break_frame_0),gr31
stdi gr2,@(gr31,#REG_GR(2))
movsg ccr,gr3
# set up the kernel stack pointer
sti sp,@(gr31,#REG_SP)
- sethi.p %hi(__break_stack_tos),sp
- setlo %lo(__break_stack_tos),sp
+ sethi.p %hi(__break_frame_0),sp
+ setlo %lo(__break_frame_0),sp
# finish building the exception frame
stdi gr4 ,@(gr31,#REG_GR(4))
movsg nmar,gr5
movsg dcr,gr6
- stdi gr4 ,@(gr31,#REG_BRR)
- sti gr19,@(gr31,#REG_BPSR)
- sti.p gr6 ,@(gr31,#REG_DCR)
+ sethi.p %hi(__debug_status),gr7
+ setlo %lo(__debug_status),gr7
+
+ stdi gr4 ,@(gr7,#DEBUG_BRR)
+ sti gr19,@(gr7,#DEBUG_BPSR)
+ sti.p gr6 ,@(gr7,#DEBUG_DCR)
# trap exceptions during break handling and disable h/w breakpoints/watchpoints
sethi %hi(DCR_EBE),gr5
lddi @(gr31,#REG_PSR) ,gr22
ldi @(gr31,#REG_PC) ,gr21
ldi @(gr31,#REG_TBR) ,gr20
- ldi.p @(gr31,#REG_DCR) ,gr6
+
+ sethi.p %hi(__debug_status),gr6
+ setlo %lo(__debug_status),gr6
+ ldi.p @(gr6,#DEBUG_DCR) ,gr6
andi gr22,#PSR_S,gr19 /* rebuild BPSR */
andi.p gr22,#PSR_ET,gr5
gdbstub_do_rx(); \
} while(!FLOWCTL_QUERY(LINE))
-static void __init debug_stub_init(void);
+struct frv_debug_status __debug_status;
-extern asmlinkage void __break_hijack_kernel_event(void);
-extern asmlinkage void __break_hijack_kernel_event_breaks_here(void);
+static void __init debug_stub_init(void);
/*****************************************************************************/
/*
__set_HSR(0, hsr0 & ~HSR0_ETMD);
/* disable single stepping */
- __debug_regs->dcr &= ~DCR_SE;
+ __debug_status.dcr &= ~DCR_SE;
/* kernel mode can propose an exception be handled in debug mode by jumping to a special
* location */
* the top kernel context */
*__debug_frame = *__frame;
__frame = __debug_frame->next_frame;
- __debug_regs->brr = (__debug_frame->tbr & TBR_TT) << 12;
- __debug_regs->brr |= BRR_EB;
+ __debug_status.brr = (__debug_frame->tbr & TBR_TT) << 12;
+ __debug_status.brr |= BRR_EB;
}
if (__debug_frame->pc == (unsigned long) __debug_bug_trap + 4) {
__debug_frame->pc = (unsigned long) start_kernel;
/* enable the debug events we want to trap */
- __debug_regs->dcr = DCR_EBE;
+ __debug_status.dcr = DCR_EBE;
#ifdef CONFIG_GDBSTUB
gdbstub_init();
*
*/
-#include <linux/sys.h>
#include <linux/linkage.h>
#include <asm/thread_info.h>
#include <asm/setup.h>
#include <linux/slab.h>
#include <linux/nmi.h>
+#include <asm/asm-offsets.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/gdb-stub.h>
extern void gdbstub_console_write(struct console *co, const char *p, unsigned n);
extern volatile uint32_t __break_error_detect[3]; /* ESFR1, ESR15, EAR15 */
-extern struct user_context __break_user_context;
struct __debug_amr {
unsigned long L, P;
if (!(__debug_regs->dcr & DCR_IBE0)) {
//gdbstub_printk("set h/w break 0: %08lx\n", addr);
__debug_regs->dcr |= DCR_IBE0;
+ __debug_regs->ibar[0] = addr;
asm volatile("movgs %0,ibar0" : : "r"(addr));
return 0;
}
if (!(__debug_regs->dcr & DCR_IBE1)) {
//gdbstub_printk("set h/w break 1: %08lx\n", addr);
__debug_regs->dcr |= DCR_IBE1;
+ __debug_regs->ibar[1] = addr;
asm volatile("movgs %0,ibar1" : : "r"(addr));
return 0;
}
if (!(__debug_regs->dcr & DCR_IBE2)) {
//gdbstub_printk("set h/w break 2: %08lx\n", addr);
__debug_regs->dcr |= DCR_IBE2;
+ __debug_regs->ibar[2] = addr;
asm volatile("movgs %0,ibar2" : : "r"(addr));
return 0;
}
if (!(__debug_regs->dcr & DCR_IBE3)) {
//gdbstub_printk("set h/w break 3: %08lx\n", addr);
__debug_regs->dcr |= DCR_IBE3;
+ __debug_regs->ibar[3] = addr;
asm volatile("movgs %0,ibar3" : : "r"(addr));
return 0;
}
if (!(__debug_regs->dcr & (DCR_DRBE0|DCR_DWBE0))) {
//gdbstub_printk("set h/w watchpoint 0 type %ld: %08lx\n", type, addr);
tmp = type==2 ? DCR_DWBE0 : type==3 ? DCR_DRBE0 : DCR_DRBE0|DCR_DWBE0;
+
__debug_regs->dcr |= tmp;
+ __debug_regs->dbar[0] = addr;
+ __debug_regs->dbmr[0][0] = dbmr.mask0;
+ __debug_regs->dbmr[0][1] = dbmr.mask1;
+ __debug_regs->dbdr[0][0] = 0;
+ __debug_regs->dbdr[0][1] = 0;
+
asm volatile(" movgs %0,dbar0 \n"
" movgs %1,dbmr00 \n"
" movgs %2,dbmr01 \n"
if (!(__debug_regs->dcr & (DCR_DRBE1|DCR_DWBE1))) {
//gdbstub_printk("set h/w watchpoint 1 type %ld: %08lx\n", type, addr);
tmp = type==2 ? DCR_DWBE1 : type==3 ? DCR_DRBE1 : DCR_DRBE1|DCR_DWBE1;
+
__debug_regs->dcr |= tmp;
+ __debug_regs->dbar[1] = addr;
+ __debug_regs->dbmr[1][0] = dbmr.mask0;
+ __debug_regs->dbmr[1][1] = dbmr.mask1;
+ __debug_regs->dbdr[1][0] = 0;
+ __debug_regs->dbdr[1][1] = 0;
+
asm volatile(" movgs %0,dbar1 \n"
" movgs %1,dbmr10 \n"
" movgs %2,dbmr11 \n"
if (__debug_regs->dcr & DCR_IBE0 && __get_ibar(0) == addr) {
//gdbstub_printk("clear h/w break 0: %08lx\n", addr);
__debug_regs->dcr &= ~DCR_IBE0;
+ __debug_regs->ibar[0] = 0;
asm volatile("movgs gr0,ibar0");
return 0;
}
if (__debug_regs->dcr & DCR_IBE1 && __get_ibar(1) == addr) {
//gdbstub_printk("clear h/w break 1: %08lx\n", addr);
__debug_regs->dcr &= ~DCR_IBE1;
+ __debug_regs->ibar[1] = 0;
asm volatile("movgs gr0,ibar1");
return 0;
}
if (__debug_regs->dcr & DCR_IBE2 && __get_ibar(2) == addr) {
//gdbstub_printk("clear h/w break 2: %08lx\n", addr);
__debug_regs->dcr &= ~DCR_IBE2;
+ __debug_regs->ibar[2] = 0;
asm volatile("movgs gr0,ibar2");
return 0;
}
if (__debug_regs->dcr & DCR_IBE3 && __get_ibar(3) == addr) {
//gdbstub_printk("clear h/w break 3: %08lx\n", addr);
__debug_regs->dcr &= ~DCR_IBE3;
+ __debug_regs->ibar[3] = 0;
asm volatile("movgs gr0,ibar3");
return 0;
}
//gdbstub_printk("clear h/w watchpoint 0 type %ld: %08lx\n", type, addr);
__debug_regs->dcr &= ~(DCR_DRBE0|DCR_DWBE0);
+ __debug_regs->dbar[0] = 0;
+ __debug_regs->dbmr[0][0] = 0;
+ __debug_regs->dbmr[0][1] = 0;
+ __debug_regs->dbdr[0][0] = 0;
+ __debug_regs->dbdr[0][1] = 0;
+
asm volatile(" movgs gr0,dbar0 \n"
" movgs gr0,dbmr00 \n"
" movgs gr0,dbmr01 \n"
//gdbstub_printk("clear h/w watchpoint 1 type %ld: %08lx\n", type, addr);
__debug_regs->dcr &= ~(DCR_DRBE1|DCR_DWBE1);
+ __debug_regs->dbar[1] = 0;
+ __debug_regs->dbmr[1][0] = 0;
+ __debug_regs->dbmr[1][1] = 0;
+ __debug_regs->dbdr[1][0] = 0;
+ __debug_regs->dbdr[1][1] = 0;
+
asm volatile(" movgs gr0,dbar1 \n"
" movgs gr0,dbmr10 \n"
" movgs gr0,dbmr11 \n"
*/
static void __attribute__((unused)) gdbstub_show_regs(void)
{
- uint32_t *reg;
+ unsigned long *reg;
int loop;
gdbstub_printk("\n");
__debug_frame,
__debug_frame->psr & PSR_S ? "kernel" : "user");
- reg = (uint32_t *) __debug_frame;
- for (loop = 0; loop < REG__END; loop++) {
- printk("%s %08x", regnames[loop + 0], reg[loop + 0]);
+ reg = (unsigned long *) __debug_frame;
+ for (loop = 0; loop < NR_PT_REGS; loop++) {
+ printk("%s %08lx", regnames[loop + 0], reg[loop + 0]);
- if (loop == REG__END - 1 || loop % 5 == 4)
+ if (loop == NR_PT_REGS - 1 || loop % 5 == 4)
printk("\n");
else
printk(" | ");
*/
static void __attribute__((unused)) gdbstub_dump_debugregs(void)
{
- unsigned long x;
-
- x = __debug_regs->dcr;
- gdbstub_printk("DCR %08lx ", x);
-
- x = __debug_regs->brr;
- gdbstub_printk("BRR %08lx\n", x);
+ gdbstub_printk("DCR %08lx ", __debug_status.dcr);
+ gdbstub_printk("BRR %08lx\n", __debug_status.brr);
gdbstub_printk("IBAR0 %08lx ", __get_ibar(0));
gdbstub_printk("IBAR1 %08lx ", __get_ibar(1));
#endif
}
- save_user_regs(&__break_user_context);
+ save_user_regs(&__debug_frame0->uc);
#if 0
gdbstub_printk("--> gdbstub() %08x %p %08x %08x\n",
__debug_frame->psr &= ~PSR_S;
if (__debug_frame->psr & PSR_PS)
__debug_frame->psr |= PSR_S;
- __debug_regs->brr = (__debug_frame->tbr & TBR_TT) << 12;
- __debug_regs->brr |= BRR_EB;
+ __debug_status.brr = (__debug_frame->tbr & TBR_TT) << 12;
+ __debug_status.brr |= BRR_EB;
sigval = SIGINT;
}
__debug_frame->psr &= ~PSR_S;
if (__debug_frame->psr & PSR_PS)
__debug_frame->psr |= PSR_S;
- __debug_regs->brr = (__debug_frame->tbr & TBR_TT) << 12;
- __debug_regs->brr |= BRR_EB;
+ __debug_status.brr = (__debug_frame->tbr & TBR_TT) << 12;
+ __debug_status.brr |= BRR_EB;
sigval = SIGXCPU;
}
LEDS(0x5002);
/* after a BREAK insn, the PC lands on the far side of it */
- if (__debug_regs->brr & BRR_SB)
+ if (__debug_status.brr & BRR_SB)
gdbstub_check_breakpoint();
LEDS(0x5003);
}
if (!sigval)
- sigval = gdbstub_compute_signal(__debug_regs->brr);
+ sigval = gdbstub_compute_signal(__debug_status.brr);
LEDS(0x5004);
if (sigval != SIGINT && sigval != SIGTRAP && sigval != SIGILL) {
static const char title[] = "Break ";
static const char crlf[] = "\r\n";
- unsigned long brr = __debug_regs->brr;
+ unsigned long brr = __debug_status.brr;
char hx;
ptr = output_buffer;
ptr = mem2hex(&zero, ptr, 4, 0);
for (loop = 1; loop <= 27; loop++)
- ptr = mem2hex((unsigned long *)__debug_frame + REG_GR(loop),
- ptr, 4, 0);
+ ptr = mem2hex(&__debug_user_context->i.gr[loop], ptr, 4, 0);
temp = (unsigned long) __frame;
ptr = mem2hex(&temp, ptr, 4, 0);
- ptr = mem2hex((unsigned long *)__debug_frame + REG_GR(29), ptr, 4, 0);
- ptr = mem2hex((unsigned long *)__debug_frame + REG_GR(30), ptr, 4, 0);
+ ptr = mem2hex(&__debug_user_context->i.gr[29], ptr, 4, 0);
+ ptr = mem2hex(&__debug_user_context->i.gr[30], ptr, 4, 0);
#ifdef CONFIG_MMU
- ptr = mem2hex((unsigned long *)__debug_frame + REG_GR(31), ptr, 4, 0);
+ ptr = mem2hex(&__debug_user_context->i.gr[31], ptr, 4, 0);
#else
temp = (unsigned long) __debug_frame;
ptr = mem2hex(&temp, ptr, 4, 0);
#endif
for (loop = 32; loop <= 63; loop++)
- ptr = mem2hex((unsigned long *)__debug_frame + REG_GR(loop),
- ptr, 4, 0);
+ ptr = mem2hex(&__debug_user_context->i.gr[loop], ptr, 4, 0);
/* deal with FR0-FR63 */
for (loop = 0; loop <= 63; loop++)
- ptr = mem2hex((unsigned long *)&__break_user_context +
- __FPMEDIA_FR(loop),
- ptr, 4, 0);
+ ptr = mem2hex(&__debug_user_context->f.fr[loop], ptr, 4, 0);
/* deal with special registers */
ptr = mem2hex(&__debug_frame->pc, ptr, 4, 0);
ptr = mem2hex(&zero, ptr, 4, 0);
ptr = mem2hex(&zero, ptr, 4, 0);
ptr = mem2hex(&__debug_frame->tbr, ptr, 4, 0);
- ptr = mem2hex(&__debug_regs->brr , ptr, 4, 0);
+ ptr = mem2hex(&__debug_status.brr , ptr, 4, 0);
asm volatile("movsg dbar0,%0" : "=r"(dbar));
ptr = mem2hex(&dbar, ptr, 4, 0);
ptr = mem2hex(&__debug_frame->iacc0, ptr, 8, 0);
- ptr = mem2hex(&__break_user_context.f.fsr[0], ptr, 4, 0);
+ ptr = mem2hex(&__debug_user_context->f.fsr[0], ptr, 4, 0);
for (loop = 0; loop <= 7; loop++)
- ptr = mem2hex(&__break_user_context.f.acc[loop], ptr, 4, 0);
+ ptr = mem2hex(&__debug_user_context->f.acc[loop], ptr, 4, 0);
- ptr = mem2hex(&__break_user_context.f.accg, ptr, 8, 0);
+ ptr = mem2hex(&__debug_user_context->f.accg, ptr, 8, 0);
for (loop = 0; loop <= 1; loop++)
- ptr = mem2hex(&__break_user_context.f.msr[loop], ptr, 4, 0);
+ ptr = mem2hex(&__debug_user_context->f.msr[loop], ptr, 4, 0);
ptr = mem2hex(&__debug_frame->gner0, ptr, 4, 0);
ptr = mem2hex(&__debug_frame->gner1, ptr, 4, 0);
- ptr = mem2hex(&__break_user_context.f.fner[0], ptr, 4, 0);
- ptr = mem2hex(&__break_user_context.f.fner[1], ptr, 4, 0);
+ ptr = mem2hex(&__debug_user_context->f.fner[0], ptr, 4, 0);
+ ptr = mem2hex(&__debug_user_context->f.fner[1], ptr, 4, 0);
break;
ptr = hex2mem(ptr, &temp, 4);
for (loop = 1; loop <= 27; loop++)
- ptr = hex2mem(ptr, (unsigned long *)__debug_frame + REG_GR(loop),
- 4);
+ ptr = hex2mem(ptr, &__debug_user_context->i.gr[loop], 4);
ptr = hex2mem(ptr, &temp, 4);
__frame = (struct pt_regs *) temp;
#endif
for (loop = 32; loop <= 63; loop++)
- ptr = hex2mem(ptr, (unsigned long *)__debug_frame + REG_GR(loop),
- 4);
+ ptr = hex2mem(ptr, &__debug_user_context->i.gr[loop], 4);
/* deal with FR0-FR63 */
for (loop = 0; loop <= 63; loop++)
- ptr = mem2hex((unsigned long *)&__break_user_context +
- __FPMEDIA_FR(loop),
- ptr, 4, 0);
+ ptr = mem2hex(&__debug_user_context->f.fr[loop], ptr, 4, 0);
/* deal with special registers */
ptr = hex2mem(ptr, &__debug_frame->pc, 4);
ptr = hex2mem(ptr, &__debug_frame->iacc0, 8);
- ptr = hex2mem(ptr, &__break_user_context.f.fsr[0], 4);
+ ptr = hex2mem(ptr, &__debug_user_context->f.fsr[0], 4);
for (loop = 0; loop <= 7; loop++)
- ptr = hex2mem(ptr, &__break_user_context.f.acc[loop], 4);
+ ptr = hex2mem(ptr, &__debug_user_context->f.acc[loop], 4);
- ptr = hex2mem(ptr, &__break_user_context.f.accg, 8);
+ ptr = hex2mem(ptr, &__debug_user_context->f.accg, 8);
for (loop = 0; loop <= 1; loop++)
- ptr = hex2mem(ptr, &__break_user_context.f.msr[loop], 4);
+ ptr = hex2mem(ptr, &__debug_user_context->f.msr[loop], 4);
ptr = hex2mem(ptr, &__debug_frame->gner0, 4);
ptr = hex2mem(ptr, &__debug_frame->gner1, 4);
- ptr = hex2mem(ptr, &__break_user_context.f.fner[0], 4);
- ptr = hex2mem(ptr, &__break_user_context.f.fner[1], 4);
+ ptr = hex2mem(ptr, &__debug_user_context->f.fner[0], 4);
+ ptr = hex2mem(ptr, &__debug_user_context->f.fner[1], 4);
gdbstub_strcpy(output_buffer,"OK");
break;
case GDB_REG_GR(0):
break;
case GDB_REG_GR(1) ... GDB_REG_GR(63):
- __break_user_context.i.gr[addr - GDB_REG_GR(0)] = temp;
+ __debug_user_context->i.gr[addr - GDB_REG_GR(0)] = temp;
break;
case GDB_REG_FR(0) ... GDB_REG_FR(63):
- __break_user_context.f.fr[addr - GDB_REG_FR(0)] = temp;
+ __debug_user_context->f.fr[addr - GDB_REG_FR(0)] = temp;
break;
case GDB_REG_PC:
- __break_user_context.i.pc = temp;
+ __debug_user_context->i.pc = temp;
break;
case GDB_REG_PSR:
- __break_user_context.i.psr = temp;
+ __debug_user_context->i.psr = temp;
break;
case GDB_REG_CCR:
- __break_user_context.i.ccr = temp;
+ __debug_user_context->i.ccr = temp;
break;
case GDB_REG_CCCR:
- __break_user_context.i.cccr = temp;
+ __debug_user_context->i.cccr = temp;
break;
case GDB_REG_BRR:
- __debug_regs->brr = temp;
+ __debug_status.brr = temp;
break;
case GDB_REG_LR:
- __break_user_context.i.lr = temp;
+ __debug_user_context->i.lr = temp;
break;
case GDB_REG_LCR:
- __break_user_context.i.lcr = temp;
+ __debug_user_context->i.lcr = temp;
break;
case GDB_REG_FSR0:
- __break_user_context.f.fsr[0] = temp;
+ __debug_user_context->f.fsr[0] = temp;
break;
case GDB_REG_ACC(0) ... GDB_REG_ACC(7):
- __break_user_context.f.acc[addr - GDB_REG_ACC(0)] = temp;
+ __debug_user_context->f.acc[addr - GDB_REG_ACC(0)] = temp;
break;
case GDB_REG_ACCG(0):
- *(uint32_t *) &__break_user_context.f.accg[0] = temp;
+ *(uint32_t *) &__debug_user_context->f.accg[0] = temp;
break;
case GDB_REG_ACCG(4):
- *(uint32_t *) &__break_user_context.f.accg[4] = temp;
+ *(uint32_t *) &__debug_user_context->f.accg[4] = temp;
break;
case GDB_REG_MSR(0) ... GDB_REG_MSR(1):
- __break_user_context.f.msr[addr - GDB_REG_MSR(0)] = temp;
+ __debug_user_context->f.msr[addr - GDB_REG_MSR(0)] = temp;
break;
case GDB_REG_GNER(0) ... GDB_REG_GNER(1):
- __break_user_context.i.gner[addr - GDB_REG_GNER(0)] = temp;
+ __debug_user_context->i.gner[addr - GDB_REG_GNER(0)] = temp;
break;
case GDB_REG_FNER(0) ... GDB_REG_FNER(1):
- __break_user_context.f.fner[addr - GDB_REG_FNER(0)] = temp;
+ __debug_user_context->f.fner[addr - GDB_REG_FNER(0)] = temp;
break;
default:
temp2 = 0;
/* step to next instruction */
case 's':
__debug_regs->dcr |= DCR_SE;
+ __debug_status.dcr |= DCR_SE;
goto done;
/* set baud rate (bBB) */
}
done:
- restore_user_regs(&__break_user_context);
+ restore_user_regs(&__debug_frame0->uc);
//gdbstub_dump_debugregs();
//gdbstub_printk("<-- gdbstub() %08x\n", __debug_frame->pc);
#endif
gdbstub_printk("%s", gdbstub_banner);
- gdbstub_printk("DCR: %x\n", __debug_regs->dcr);
gdbstub_io_init();
#include <linux/threads.h>
#include <linux/linkage.h>
+#include <asm/thread_info.h>
#include <asm/ptrace.h>
#include <asm/page.h>
#include <asm/spr-regs.h>
/* time.c */
extern void time_divisor_init(void);
+/* cmode.S */
+extern asmlinkage void frv_change_cmode(int);
+
#endif /* __ASSEMBLY__ */
#endif /* _FRV_LOCAL_H */
#include "local.h"
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
-extern void frv_change_cmode(int);
-
/*
* Debug macros
*/
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/module.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/interrupt.h>
+#include <asm/asm-offsets.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/setup.h>
#include <asm/pgalloc.h>
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
struct task_struct *alloc_task_struct(void)
{
struct task_struct *p = kmalloc(THREAD_SIZE, GFP_KERNEL);
regs0 = __kernel_frame0_ptr;
childregs0 = (struct pt_regs *)
- (task_stack_page(p) + THREAD_SIZE - USER_CONTEXT_SIZE);
+ (task_stack_page(p) + THREAD_SIZE - FRV_FRAME0_SIZE);
childregs = childregs0;
/* set up the userspace frame (the only place that the USP is stored) */
return 1;
}
+
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpregs)
+{
+ memcpy(fpregs,
+ ¤t->thread.user->f,
+ sizeof(current->thread.user->f));
+ return 1;
+}
# 2 of the License, or (at your option) any later version.
#
###############################################################################
+
#include <linux/linkage.h>
#include <asm/thread_info.h>
#include <asm/processor.h>
# address of frame 0 (userspace) on current kernel stack
.globl __kernel_frame0_ptr
__kernel_frame0_ptr:
- .long init_thread_union + THREAD_SIZE - USER_CONTEXT_SIZE
+ .long init_thread_union + THREAD_SIZE - FRV_FRAME0_SIZE
# address of current task
.globl __kernel_current_task
#include <linux/init.h>
#include <linux/module.h>
+#include <asm/asm-offsets.h>
#include <asm/setup.h>
#include <asm/fpu.h>
#include <asm/system.h>
void show_regs(struct pt_regs *regs)
{
- uint32_t *reg;
+ unsigned long *reg;
int loop;
printk("\n");
- printk("Frame: @%08x [%s]\n",
- (uint32_t) regs,
+ printk("Frame: @%08lx [%s]\n",
+ (unsigned long) regs,
regs->psr & PSR_S ? "kernel" : "user");
- reg = (uint32_t *) regs;
- for (loop = 0; loop < REG__END; loop++) {
- printk("%s %08x", regnames[loop + 0], reg[loop + 0]);
+ reg = (unsigned long *) regs;
+ for (loop = 0; loop < NR_PT_REGS; loop++) {
+ printk("%s %08lx", regnames[loop + 0], reg[loop + 0]);
- if (loop == REG__END - 1 || loop % 5 == 4)
+ if (loop == NR_PT_REGS - 1 || loop % 5 == 4)
printk("\n");
else
printk(" | ");
*/
static void show_backtrace_regs(struct pt_regs *frame)
{
- uint32_t *reg;
+ unsigned long *reg;
int loop;
/* print the registers for this frame */
frame->psr & PSR_S ? "Kernel Mode" : "User Mode",
frame);
- reg = (uint32_t *) frame;
- for (loop = 0; loop < REG__END; loop++) {
- printk("%s %08x", regnames[loop + 0], reg[loop + 0]);
+ reg = (unsigned long *) frame;
+ for (loop = 0; loop < NR_PT_REGS; loop++) {
+ printk("%s %08lx", regnames[loop + 0], reg[loop + 0]);
- if (loop == REG__END - 1 || loop % 5 == 4)
+ if (loop == NR_PT_REGS - 1 || loop % 5 == 4)
printk("\n");
else
printk(" | ");
ioport_resource.end = (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;
ioport_resource.end += ioport_resource.start;
- printk("PCI IO window: %08lx-%08lx\n", ioport_resource.start, ioport_resource.end);
+ printk("PCI IO window: %08llx-%08llx\n",
+ (unsigned long long) ioport_resource.start,
+ (unsigned long long) ioport_resource.end);
iomem_resource.start = (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00;
iomem_resource.end = (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff;
iomem_resource.end += iomem_resource.start;
- printk("PCI MEM window: %08lx-%08lx\n", iomem_resource.start, iomem_resource.end);
- printk("PCI DMA memory: %08lx-%08lx\n", dma_coherent_mem_start, dma_coherent_mem_end);
+ printk("PCI MEM window: %08llx-%08llx\n",
+ (unsigned long long) iomem_resource.start,
+ (unsigned long long) iomem_resource.end);
+ printk("PCI DMA memory: %08lx-%08lx\n",
+ dma_coherent_mem_start, dma_coherent_mem_end);
if (!pci_probe)
return -ENXIO;
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SOFTWARE_SUSPEND=y
-CONFIG_PM_STD_PARTITION="/dev/hda2"
+CONFIG_PM_STD_PARTITION=""
#
# ACPI (Advanced Configuration and Power Interface) Support
crash_save_this_cpu(regs, cpu);
}
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) && defined(CONFIG_X86_LOCAL_APIC)
static atomic_t waiting_for_crash_ipi;
static int crash_nmi_callback(struct pt_regs *regs, int cpu)
memset(bitmap, 0xff, IO_BITMAP_BYTES);
t->io_bitmap_ptr = bitmap;
+ set_thread_flag(TIF_IO_BITMAP);
}
/*
*/
void exit_thread(void)
{
- struct task_struct *tsk = current;
- struct thread_struct *t = &tsk->thread;
-
/* The process may have allocated an io port bitmap... nuke it. */
- if (unlikely(NULL != t->io_bitmap_ptr)) {
+ if (unlikely(test_thread_flag(TIF_IO_BITMAP))) {
+ struct task_struct *tsk = current;
+ struct thread_struct *t = &tsk->thread;
int cpu = get_cpu();
struct tss_struct *tss = &per_cpu(init_tss, cpu);
kfree(t->io_bitmap_ptr);
t->io_bitmap_ptr = NULL;
+ clear_thread_flag(TIF_IO_BITMAP);
/*
* Careful, clear this in the TSS too:
*/
memset(tsk->thread.debugreg, 0, sizeof(unsigned long)*8);
memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
+ clear_tsk_thread_flag(tsk, TIF_DEBUG);
/*
* Forget coprocessor state..
*/
savesegment(gs,p->thread.gs);
tsk = current;
- if (unlikely(NULL != tsk->thread.io_bitmap_ptr)) {
+ if (unlikely(test_tsk_thread_flag(tsk, TIF_IO_BITMAP))) {
p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
if (!p->thread.io_bitmap_ptr) {
p->thread.io_bitmap_max = 0;
}
memcpy(p->thread.io_bitmap_ptr, tsk->thread.io_bitmap_ptr,
IO_BITMAP_BYTES);
+ set_tsk_thread_flag(p, TIF_IO_BITMAP);
}
/*
return 1;
}
-static inline void
-handle_io_bitmap(struct thread_struct *next, struct tss_struct *tss)
+static noinline void __switch_to_xtra(struct task_struct *next_p,
+ struct tss_struct *tss)
{
- if (!next->io_bitmap_ptr) {
+ struct thread_struct *next;
+
+ next = &next_p->thread;
+
+ if (test_tsk_thread_flag(next_p, TIF_DEBUG)) {
+ set_debugreg(next->debugreg[0], 0);
+ set_debugreg(next->debugreg[1], 1);
+ set_debugreg(next->debugreg[2], 2);
+ set_debugreg(next->debugreg[3], 3);
+ /* no 4 and 5 */
+ set_debugreg(next->debugreg[6], 6);
+ set_debugreg(next->debugreg[7], 7);
+ }
+
+ if (!test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) {
/*
* Disable the bitmap via an invalid offset. We still cache
* the previous bitmap owner and the IO bitmap contents:
tss->io_bitmap_base = INVALID_IO_BITMAP_OFFSET;
return;
}
+
if (likely(next == tss->io_bitmap_owner)) {
/*
* Previous owner of the bitmap (hence the bitmap content)
set_iopl_mask(next->iopl);
/*
- * Now maybe reload the debug registers
+ * Now maybe handle debug registers and/or IO bitmaps
*/
- if (unlikely(next->debugreg[7])) {
- set_debugreg(next->debugreg[0], 0);
- set_debugreg(next->debugreg[1], 1);
- set_debugreg(next->debugreg[2], 2);
- set_debugreg(next->debugreg[3], 3);
- /* no 4 and 5 */
- set_debugreg(next->debugreg[6], 6);
- set_debugreg(next->debugreg[7], 7);
- }
-
- if (unlikely(prev->io_bitmap_ptr || next->io_bitmap_ptr))
- handle_io_bitmap(next, tss);
+ if (unlikely((task_thread_info(next_p)->flags & _TIF_WORK_CTXSW))
+ || test_tsk_thread_flag(prev_p, TIF_IO_BITMAP))
+ __switch_to_xtra(next_p, tss);
disable_tsc(prev_p, next_p);
for(i=0; i<4; i++)
if ((0x5f54 >> ((data >> (16 + 4*i)) & 0xf)) & 1)
goto out_tsk;
+ if (data)
+ set_tsk_thread_flag(child, TIF_DEBUG);
+ else
+ clear_tsk_thread_flag(child, TIF_DEBUG);
}
-
addr -= (long) &dummy->u_debugreg;
addr = addr >> 2;
child->thread.debugreg[addr] = data;
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/mmzone.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/ioport.h>
#include <linux/acpi.h>
#include <linux/apm_bios.h>
res->start = e820.map[i].addr;
res->end = res->start + e820.map[i].size - 1;
res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
- request_resource(&iomem_resource, res);
+ if (request_resource(&iomem_resource, res)) {
+ kfree(res);
+ continue;
+ }
if (e820.map[i].type == E820_RAM) {
/*
* We don't know which RAM region contains kernel data,
unsigned long get_cmos_time(void)
{
unsigned long retval;
+ unsigned long flags;
- spin_lock(&rtc_lock);
+ spin_lock_irqsave(&rtc_lock, flags);
if (efi_enabled)
retval = efi_get_time();
else
retval = mach_get_cmos_time();
- spin_unlock(&rtc_lock);
+ spin_unlock_irqrestore(&rtc_lock, flags);
return retval;
}
vmalloc_sync_all();
return atomic_notifier_chain_register(&i386die_chain, nb);
}
-EXPORT_SYMBOL(register_die_notifier);
+EXPORT_SYMBOL(register_die_notifier); /* used modular by kdb */
int unregister_die_notifier(struct notifier_block *nb)
{
return atomic_notifier_chain_unregister(&i386die_chain, nb);
}
-EXPORT_SYMBOL(unregister_die_notifier);
+EXPORT_SYMBOL(unregister_die_notifier); /* used modular by kdb */
static inline int valid_stack_ptr(struct thread_info *tinfo, void *p)
{
static void handle_BUG(struct pt_regs *regs)
{
+ unsigned long eip = regs->eip;
unsigned short ud2;
- unsigned short line;
- char *file;
- char c;
- unsigned long eip;
-
- eip = regs->eip;
if (eip < PAGE_OFFSET)
- goto no_bug;
+ return;
if (__get_user(ud2, (unsigned short __user *)eip))
- goto no_bug;
+ return;
if (ud2 != 0x0b0f)
- goto no_bug;
- if (__get_user(line, (unsigned short __user *)(eip + 2)))
- goto bug;
- if (__get_user(file, (char * __user *)(eip + 4)) ||
- (unsigned long)file < PAGE_OFFSET || __get_user(c, file))
- file = "<bad filename>";
+ return;
printk(KERN_EMERG "------------[ cut here ]------------\n");
- printk(KERN_EMERG "kernel BUG at %s:%d!\n", file, line);
-no_bug:
- return;
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+ do {
+ unsigned short line;
+ char *file;
+ char c;
- /* Here we know it was a BUG but file-n-line is unavailable */
-bug:
- printk(KERN_EMERG "Kernel BUG\n");
+ if (__get_user(line, (unsigned short __user *)(eip + 2)))
+ break;
+ if (__get_user(file, (char * __user *)(eip + 4)) ||
+ (unsigned long)file < PAGE_OFFSET || __get_user(c, file))
+ file = "<bad filename>";
+
+ printk(KERN_EMERG "kernel BUG at %s:%d!\n", file, line);
+ return;
+ } while (0);
+#endif
+ printk(KERN_EMERG "Kernel BUG at [verbose debug info unavailable]\n");
}
/* This is gone through when something in the kernel
unsigned long
copy_to_user(void __user *to, const void *from, unsigned long n)
{
- might_sleep();
BUG_ON((long) n < 0);
if (access_ok(VERIFY_WRITE, to, n))
n = __copy_to_user(to, from, n);
unsigned long
copy_from_user(void *to, const void __user *from, unsigned long n)
{
- might_sleep();
BUG_ON((long) n < 0);
if (access_ok(VERIFY_READ, from, n))
n = __copy_from_user(to, from, n);
#include <linux/oprofile.h>
#include <linux/sysdev.h>
#include <linux/slab.h>
+#include <linux/moduleparam.h>
#include <asm/nmi.h>
#include <asm/msr.h>
#include <asm/apic.h>
return 0;
}
+static int p4force;
+module_param(p4force, int, 0);
static int __init p4_init(char ** cpu_type)
{
__u8 cpu_model = boot_cpu_data.x86_model;
- if (cpu_model > 4)
+ if (!p4force && (cpu_model > 6 || cpu_model == 5))
return 0;
#ifndef CONFIG_SMP
#include "pci.h"
-#ifdef CONFIG_PCI_BIOS
-extern void pcibios_sort(void);
-#endif
-
unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
PCI_PROBE_MMCONF;
extern void pci_direct_init(void);
extern void pci_pcbios_init(void);
extern void pci_mmcfg_init(void);
-
+extern void pcibios_sort(void);
#include <linux/kernel.h>
#include <linux/kdev_t.h>
#include <linux/string.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/console.h>
#include <linux/timex.h>
#include <linux/sched.h>
}
int
-valid_mmap_phys_addr_range (unsigned long phys_addr, unsigned long size)
+valid_mmap_phys_addr_range (unsigned long pfn, unsigned long size)
{
/*
* MMIO regions are often missing from the EFI memory map.
#include <linux/seq_file.h>
#include <linux/string.h>
#include <linux/threads.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/dmi.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
* Avoid attribute aliasing. See Documentation/ia64/aliasing.txt
* for more details.
*/
- if (!valid_mmap_phys_addr_range(vma->vm_pgoff << PAGE_SHIFT, size))
+ if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size))
return -EINVAL;
prot = phys_mem_access_prot(NULL, vma->vm_pgoff, size,
vma->vm_page_prot);
#include <linux/kernel.h>
#include <linux/kdev_t.h>
#include <linux/string.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/console.h>
#include <linux/timex.h>
#include <linux/sched.h>
#include <linux/root_dev.h>
#include <linux/seq_file.h>
#include <linux/timex.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/cpu.h>
#include <linux/nodemask.h>
#include <linux/pfn.h>
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
+ select ARCH_SPARSEMEM_ENABLE
help
The Ocelot is a MIPS-based Single Board Computer (SBC) made by
Momentum Computer <http://www.momenco.com/>.
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
+ select ARCH_SPARSEMEM_ENABLE
help
Qemu is a software emulator which among other architectures also
can simulate a MIPS32 4Kc system. This patch adds support for the
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_SMP
help
This are the SGI Indy, Challenge S and Indigo2, as well as certain
OEM variants like the Tandem CMN B006S. To compile a Linux kernel
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
+config ARCH_SPARSEMEM_ENABLE
+ bool
+
+config ARCH_SPARSEMEM_ENABLE
+ bool
+ select SPARSEMEM_STATIC
+
config NUMA
bool "NUMA Support"
depends on SYS_SUPPORTS_NUMA
menu "Kernel hacking"
+config TRACE_IRQFLAGS_SUPPORT
+ bool
+ default y
+
source "lib/Kconfig.debug"
config CROSSCOMPILE
vmlinux.bin: $(vmlinux-32)
+@$(call makeboot,$@)
-vmlinux.ecoff vmlinux.rm200: $(vmlinux-32)
+vmlinux.ecoff: $(vmlinux-32)
+@$(call makeboot,$@)
vmlinux.srec: $(vmlinux-32)
+@$(call makeboot,$@)
CLEAN_FILES += vmlinux.ecoff \
- vmlinux.srec \
- vmlinux.rm200.tmp \
- vmlinux.rm200
+ vmlinux.srec
archclean:
@$(MAKE) $(clean)=arch/mips/boot
}
-static struct hw_interrupt_type rise_edge_irq_type = {
+static struct irq_chip rise_edge_irq_type = {
.typename = "Au1000 Rise Edge",
.startup = startup_irq,
.shutdown = shutdown_irq,
.end = end_irq,
};
-static struct hw_interrupt_type fall_edge_irq_type = {
+static struct irq_chip fall_edge_irq_type = {
.typename = "Au1000 Fall Edge",
.startup = startup_irq,
.shutdown = shutdown_irq,
.end = end_irq,
};
-static struct hw_interrupt_type either_edge_irq_type = {
+static struct irq_chip either_edge_irq_type = {
.typename = "Au1000 Rise or Fall Edge",
.startup = startup_irq,
.shutdown = shutdown_irq,
.end = end_irq,
};
-static struct hw_interrupt_type level_irq_type = {
+static struct irq_chip level_irq_type = {
.typename = "Au1000 Level",
.startup = startup_irq,
.shutdown = shutdown_irq,
/*
*
* BRIEF MODULE DESCRIPTION
- * PROM library initialisation code, assuming YAMON is the boot loader.
+ * PROM library initialisation code, supports YAMON and U-Boot.
*
* Copyright 2000, 2001, 2006 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
extern int prom_argc;
extern char **prom_argv, **prom_envp;
-typedef struct
-{
- char *name;
- char *val;
-} t_env_var;
-
char * prom_getcmdline(void)
{
{
/*
* Return a pointer to the given environment variable.
+ * YAMON uses "name", "value" pairs, while U-Boot uses "name=value".
*/
- t_env_var *env = (t_env_var *)prom_envp;
-
- while (env->name) {
- if (strcmp(envname, env->name) == 0)
- return env->val;
+ char **env = prom_envp;
+ int i = strlen(envname);
+ int yamon = (*env && strchr(*env, '=') == NULL);
+
+ while (*env) {
+ if (yamon) {
+ if (strcmp(envname, *env++) == 0)
+ return *env;
+ } else {
+ if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=')
+ return *env + i + 1;
+ }
env++;
}
return NULL;
extern void au1x_time_init(void);
extern void au1x_timer_setup(struct irqaction *irq);
extern void au1xxx_time_init(void);
-extern void au1xxx_timer_setup(struct irqaction *irq);
extern void set_cpuspec(void);
void __init plat_mem_setup(void)
_machine_halt = au1000_halt;
pm_power_off = au1000_power_off;
board_time_init = au1xxx_time_init;
- board_timer_setup = au1xxx_timer_setup;
/* IO/MEM resources. */
set_io_port_base(0);
}
#endif
-void __init au1xxx_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
unsigned int est_freq;
+++ /dev/null
-#
-# Copyright 2002 Cogent Computer Systems
-# dan@embeddededge.com
-#
-# Makefile for the Cogent CSB250 Au1500 board. Copied from Pb1500.
-#
-
-obj-y := init.o board_setup.o irqmap.o
+++ /dev/null
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * Cogent CSB250 board setup.
- *
- * Copyright 2002 Cogent Computer Systems, Inc.
- * dan@embeddededge.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/mc146818rtc.h>
-#include <linux/delay.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/keyboard.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/au1000.h>
-#include <asm/csb250.h>
-
-extern int (*board_pci_idsel)(unsigned int devsel, int assert);
-int csb250_pci_idsel(unsigned int devsel, int assert);
-
-void __init board_setup(void)
-{
- u32 pin_func, pin_val;
- u32 sys_freqctrl, sys_clksrc;
-
-
- // set AUX clock to 12MHz * 8 = 96 MHz
- au_writel(8, SYS_AUXPLL);
- au_writel(0, SYS_PINSTATERD);
- udelay(100);
-
-#if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
-
- /* GPIO201 is input for PCMCIA card detect */
- /* GPIO203 is input for PCMCIA interrupt request */
- au_writel(au_readl(GPIO2_DIR) & (u32)(~((1<<1)|(1<<3))), GPIO2_DIR);
-
- /* zero and disable FREQ2 */
- sys_freqctrl = au_readl(SYS_FREQCTRL0);
- sys_freqctrl &= ~0xFFF00000;
- au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
- /* zero and disable USBH/USBD clocks */
- sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x00007FE0;
- au_writel(sys_clksrc, SYS_CLKSRC);
-
- sys_freqctrl = au_readl(SYS_FREQCTRL0);
- sys_freqctrl &= ~0xFFF00000;
-
- sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x00007FE0;
-
- // FREQ2 = aux/2 = 48 MHz
- sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
- au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
- /*
- * Route 48MHz FREQ2 into USB Host and/or Device
- */
-#ifdef CONFIG_USB_OHCI
- sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
-#endif
-#ifdef CONFIG_AU1X00_USB_DEVICE
- sys_clksrc |= ((4<<7) | (0<<6) | (0<<5));
-#endif
- au_writel(sys_clksrc, SYS_CLKSRC);
-
-
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
-#ifndef CONFIG_AU1X00_USB_DEVICE
- // 2nd USB port is USB host
- pin_func |= 0x8000;
-#endif
- au_writel(pin_func, SYS_PINFUNC);
-#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
-
- /* Configure GPIO2....it's used by PCI among other things.
- */
-
- /* Make everything but GP200 (PCI RST) an input until we get
- * the pins set correctly.
- */
- au_writel(0x00000001, GPIO2_DIR);
-
- /* Set the pins used for output.
- * A zero bit will leave PCI reset, LEDs off, power up USB,
- * IDSEL disabled.
- */
- pin_val = ((3 << 30) | (7 << 19) | (1 << 17) | (1 << 16));
- au_writel(pin_val, GPIO2_OUTPUT);
-
- /* Set the output direction.
- */
- pin_val = ((3 << 14) | (7 << 3) | (1 << 1) | (1 << 0));
- au_writel(pin_val, GPIO2_DIR);
-
-#ifdef CONFIG_PCI
- /* Use FREQ1 for the PCI output clock. We use the
- * CPU clock of 384 MHz divided by 12 to get 32 MHz PCI.
- * If Michael changes the CPU speed, we need to adjust
- * that here as well :-).
- */
-
- /* zero and disable FREQ1
- */
- sys_freqctrl = au_readl(SYS_FREQCTRL0);
- sys_freqctrl &= ~0x000ffc00;
- au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
- /* zero and disable PCI clock
- */
- sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x000f8000;
- au_writel(sys_clksrc, SYS_CLKSRC);
-
- /* Get current values (which really should match above).
- */
- sys_freqctrl = au_readl(SYS_FREQCTRL0);
- sys_freqctrl &= ~0x000ffc00;
-
- sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x000f8000;
-
- /* FREQ1 = cpu/12 = 32 MHz
- */
- sys_freqctrl |= ((5<<12) | (1<<11) | (0<<10));
- au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
- /* Just connect the clock without further dividing.
- */
- sys_clksrc |= ((3<<17) | (0<<16) | (0<<15));
- au_writel(sys_clksrc, SYS_CLKSRC);
-
- udelay(1);
-
- /* Now that clocks should be running, take PCI out of reset.
- */
- pin_val = au_readl(GPIO2_OUTPUT);
- pin_val |= ((1 << 16) | 1);
- au_writel(pin_val, GPIO2_OUTPUT);
-
- // Setup PCI bus controller
- au_writel(0, Au1500_PCI_CMEM);
- au_writel(0x00003fff, Au1500_CFG_BASE);
-
- /* We run big endian without any of the software byte swapping,
- * so configure the PCI bridge to help us out.
- */
- au_writel(0xf | (2<<6) | (1<<5) | (1<<4), Au1500_PCI_CFG);
-
- au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV);
- au_writel(0, Au1500_PCI_MWBASE_REV_CCL);
- au_writel(0x02a00356, Au1500_PCI_STATCMD);
- au_writel(0x00003c04, Au1500_PCI_HDRTYPE);
- au_writel(0x00000008, Au1500_PCI_MBAR);
- au_sync();
-
- board_pci_idsel = csb250_pci_idsel;
-#endif
-
- /* Enable sys bus clock divider when IDLE state or no bus activity. */
- au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
-
-#ifdef CONFIG_RTC
- // Enable the RTC if not already enabled
- if (!(au_readl(0xac000028) & 0x20)) {
- printk("enabling clock ...\n");
- au_writel((au_readl(0xac000028) | 0x20), 0xac000028);
- }
- // Put the clock in BCD mode
- if (readl(0xac00002C) & 0x4) { /* reg B */
- au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c);
- au_sync();
- }
-#endif
-}
-
-/* The IDSEL is selected in the GPIO2 register. We will make device
- * 12 appear in slot 0 and device 13 appear in slot 1.
- */
-int
-csb250_pci_idsel(unsigned int devsel, int assert)
-{
- int retval;
- unsigned int gpio2_pins;
-
- retval = 1;
-
- /* First, disable both selects, then assert the one requested.
- */
- au_writel(0xc000c000, GPIO2_OUTPUT);
- au_sync();
-
- if (assert) {
- if (devsel == 12)
- gpio2_pins = 0x40000000;
- else if (devsel == 13)
- gpio2_pins = 0x80000000;
- else {
- gpio2_pins = 0xc000c000;
- retval = 0;
- }
- au_writel(gpio2_pins, GPIO2_OUTPUT);
- }
- au_sync();
-
- return retval;
-}
+++ /dev/null
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * Cogent CSB250 board setup
- *
- * Copyright 2002 Cogent Computer Systems, Inc.
- * dan@embeddededge.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-int prom_argc;
-char **prom_argv, **prom_envp;
-extern void __init prom_init_cmdline(void);
-extern char *prom_getenv(char *envname);
-
-/* When we get initrd working someday.........
-*/
-int my_initrd_start, my_initrd_size;
-
-/* Start arguments and environment.
-*/
-static char *csb_env[2];
-static char *csb_arg[4];
-static char *arg1 = "console=ttyS3,38400";
-static char *arg2 = "root=/dev/nfs rw ip=any";
-static char *env1 = "ethaddr=00:30:23:50:00:00";
-
-const char *get_system_type(void)
-{
- return "Cogent CSB250";
-}
-
-int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
-{
- unsigned char *memsize_str;
- unsigned long memsize;
-
- /* We use a0 and a1 to pass initrd start and size.
- */
- if (((unsigned int) argc > 0) && ((uint)argv > 0)) {
- my_initrd_start = (unsigned int)argc;
- my_initrd_size = (unsigned int)argv;
- }
-
- /* First argv is ignored.
- */
- prom_argc = 3;
- prom_argv = csb_arg;
- prom_envp = csb_env;
- csb_arg[1] = arg1;
- csb_arg[2] = arg2;
- csb_env[0] = env1;
-
- mips_machgroup = MACH_GROUP_ALCHEMY;
- mips_machtype = MACH_CSB250;
-
- prom_init_cmdline();
- memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
- memsize = 0x02000000;
- } else {
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
- add_memory_region(0, memsize, BOOT_MEM_RAM);
- return 0;
-}
+++ /dev/null
-/*
- * BRIEF MODULE DESCRIPTION
- * Au1xxx irq map table
- *
- * Copyright 2003 Embedded Edge, LLC
- * dan@embeddededge.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-#include <asm/au1000.h>
-
-au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
-
- { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
- { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
-};
-
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
+++ /dev/null
-#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
-#
-# Makefile for the Alchemy Semiconductor PB1000 board.
-#
-
-obj-y := init.o board_setup.o irqmap.o
+++ /dev/null
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * Alchemy Db1x00 board setup.
- *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/mc146818rtc.h>
-#include <linux/delay.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/keyboard.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/au1000.h>
-
-void board_reset (void)
-{
-}
-
-void __init board_setup(void)
-{
- u32 pin_func;
-
-#ifdef CONFIG_AU1X00_USB_DEVICE
- // 2nd USB port is USB device
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
- au_writel(pin_func, SYS_PINFUNC);
-#endif
-
-#if defined(CONFIG_IRDA) && (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
- /* set IRFIRSEL instead of GPIO15 */
- pin_func = au_readl(SYS_PINFUNC) | (u32)((1<<8));
- au_writel(pin_func, SYS_PINFUNC);
- au_sync();
-#endif
-
- printk("AMD Alchemy Hydrogen3 Board\n");
-}
+++ /dev/null
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * PB1000 board setup
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-int prom_argc;
-char **prom_argv, **prom_envp;
-extern void __init prom_init_cmdline(void);
-extern char *prom_getenv(char *envname);
-
-const char *get_system_type(void)
-{
-#ifdef CONFIG_MIPS_BOSPORUS
- return "Alchemy Bosporus Gateway Reference";
-#else
- return "Alchemy Db1x00";
-#endif
-}
-
-int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
-{
- unsigned char *memsize_str;
- unsigned long memsize;
-
- prom_argc = argc;
- prom_argv = argv;
- prom_envp = envp;
-
- mips_machgroup = MACH_GROUP_ALCHEMY;
- mips_machtype = MACH_DB1000; /* set the platform # */
- prom_init_cmdline();
-
- memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
- memsize = 0x04000000;
- } else {
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
- add_memory_region(0, memsize, BOOT_MEM_RAM);
- return 0;
-}
+++ /dev/null
-/*
- * BRIEF MODULE DESCRIPTION
- * Au1xxx irq map table
- *
- * Copyright 2003 Embedded Edge, LLC
- * dan@embeddededge.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-#include <asm/au1000.h>
-
-au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
-
- /* { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, */
- { AU1000_GPIO_21, INTC_INT_LOW_LEVEL, 0 },
-};
-
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
}
}
-static struct hw_interrupt_type external_irq_type =
+static struct irq_chip external_irq_type =
{
#ifdef CONFIG_MIPS_PB1200
"Pb1200 Ext",
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/config.h>
#include <linux/linkage.h>
#include <linux/init.h>
#include <linux/kernel.h>
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/config.h>
#include <linux/compiler.h>
#include <linux/init.h>
#include <linux/module.h>
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/config.h>
#include <linux/proc_fs.h>
#include <linux/stat.h>
#include <asm/page.h>
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/config.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/mm.h>
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/config.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/module.h>
mips_hpt_frequency = EXCITE_CPU_EXT_CLOCK * mult / div / 2;
}
-static void excite_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
/* The eXcite platform uses the alternate timer interrupt */
set_c0_intcontrol(0x80);
/* Set up timer initialization hooks */
board_time_init = excite_timer_init;
- board_timer_setup = excite_timer_setup;
/* Set up the peripheral address map */
*(boot_ocd_base + (LKB9 / sizeof (u32))) = 0;
return "MIPS Cobalt";
}
-static void __init cobalt_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
/* Load timer value for 1KHz (TCLK is 50MHz) */
GALILEO_OUTL(50*1000*1000 / 1000, GT_TC0_OFS);
_machine_halt = cobalt_machine_halt;
pm_power_off = cobalt_machine_power_off;
- board_timer_setup = cobalt_timer_setup;
-
set_io_port_base(CKSEG1ADDR(GT64111_IO_BASE));
/* I/O port resource must include UART and LCD/buttons */
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:50:55 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 09:59:39 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
CONFIG_MIPS_ATLAS=y
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_MIPS_BONITO64=y
CONFIG_BOARD_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
+CONFIG_SYS_SUPPORTS_MULTITHREADING=y
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
CONFIG_HZ_100=y
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
+CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_SECMARK=y
CONFIG_IP_NF_CONNTRACK_EVENTS=y
CONFIG_IP_NF_CONNTRACK_NETLINK=m
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_H323=m
+CONFIG_IP_NF_SIP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_NAT_H323=m
+CONFIG_IP_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
+CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
# CONFIG_QNX4FS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_RIO=n
+CONFIG_I2C_OCORES=n
+CONFIG_DEBUG_RT_MUTEXES=n
+CONFIG_RT_MUTEX_TESTER=n
+CONFIG_DEBUG_RWSEMS=n
+CONFIG_DEBUG_LOCKING_API_SELFTESTS=n
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:50:55 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:02:58 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_COHERENT=y
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_SIBYTE_DMA_PAGEOPS is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_SMP=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_NR_CPUS=4
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_HZ=1000
-CONFIG_SMP=y
-CONFIG_NR_CPUS=4
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_BKL is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_BUILD_ELF64=y
+# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_MIPS32_O32=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
+# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
CONFIG_SIBYTE_SB1250_DUART=y
CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Tue Apr 25 00:08:06 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:03:24 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
CONFIG_MACH_VR41XX=y
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_VR41XX=y
# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
#
# File systems
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:50:57 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:03:25 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
CONFIG_MIPS_COBALT=y
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_I8259=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_RTC=y
CONFIG_COBALT_LCD=y
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:50:57 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:03:33 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_64BIT_PHYS_ADDR=y
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# PHY device support
#
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
#
# MII PHY device drivers
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_AU1X00_GPIO is not set
# CONFIG_TS_AU1X00_ADS7846 is not set
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:50:58 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:03:34 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_64BIT_PHYS_ADDR=y
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# PHY device support
#
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
#
# MII PHY device drivers
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_AU1X00_GPIO is not set
# CONFIG_TS_AU1X00_ADS7846 is not set
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_S1D13XXX is not set
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:50:58 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:03:43 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
CONFIG_MIPS_DB1200=y
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_COHERENT=y
CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_64BIT_PHYS_ADDR=y
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_AU1550 is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_AU1X00_GPIO is not set
# CONFIG_TS_AU1X00_ADS7846 is not set
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_S1D13XXX is not set
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:50:59 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:03:56 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_64BIT_PHYS_ADDR=y
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# PHY device support
#
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
#
# MII PHY device drivers
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
#
# PCMCIA devices
#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
#
# Open Sound System
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_LD=m
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:00 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:03:59 2006
#
CONFIG_MIPS=y
CONFIG_MIPS_DB1550=y
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_64BIT_PHYS_ADDR=y
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_AU1550=m
# CONFIG_MTD_NAND_DISKONCHIP is not set
#
# PHY device support
#
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
#
# MII PHY device drivers
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:01 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:00 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_I8259=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:01 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:01 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
CONFIG_MACH_DECSTATION=y
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_WB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_128=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_S1D13XXX is not set
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Tue Apr 25 00:08:20 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:02 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
CONFIG_MACH_VR41XX=y
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_PCWATCHDOG is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_WDT is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17
-# Sun Jun 18 13:46:53 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:05 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:02 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:05 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
CONFIG_MIPS_EV64120=y
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:03 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:05 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_BOARD_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc4
-# Thu Feb 23 13:15:27 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:09 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+CONFIG_BASLER_EXCITE=y
+# CONFIG_BASLER_EXCITE_PROTOTYPE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-CONFIG_BASLER_EXCITE=y
-# CONFIG_BASLER_EXCITE_PROTOTYPE is not set
-# CONFIG_DDB5074 is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_COHERENT=y
-CONFIG_SERIAL_RM9000=y
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_HZ=1000
-# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_EMBEDDED=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
# Block layer
#
# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_MMU=y
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
#
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_BASLER_EXCITE=y
-# CONFIG_MTD_NAND_BASLER_EXCITE_RDNBY is not set
-# CONFIG_MTD_NAND_BASLER_EXCITE_PERF is not set
# CONFIG_MTD_NAND_NANDSIM is not set
#
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-# CONFIG_TITAN_GE is not set
-CONFIG_RM9K_GE=m
#
# Ethernet (10000 Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
CONFIG_SERIAL_8250_EXTENDED=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_WDT_RM9K_GPI=m
#
# PCI-based Watchdog Cards
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
# Misc devices
#
-#
-# Multimedia Capabilities Port drivers
-#
-
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SMIVGX is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
-CONFIG_FB_DD=y
#
# Console display driver support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
#
# USB Network Adapters
#
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
-CONFIG_USB_ARTTFT=m
-# CONFIG_USB_ARTTOUCH is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# CONFIG_MMC is not set
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
#
+# CONFIG_DMA_ENGINE is not set
#
-# EDAC - error detection and reporting (RAS)
+# DMA Clients
#
#
-# eXcite frame capture support
+# DMA Devices
#
-CONFIG_EXCITE_FCAP=m
-CONFIG_EXCITE_FCAP_GPI=m
#
# File systems
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:50:54 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:10 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
CONFIG_SGI_IP22=y
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARC=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_BOARD_SCACHE=y
CONFIG_IP22_CPU_SCACHE=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
+CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_SECMARK=y
CONFIG_IP_NF_CONNTRACK_EVENTS=y
CONFIG_IP_NF_CONNTRACK_NETLINK=m
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_H323=m
+CONFIG_IP_NF_SIP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_NAT_H323=m
+CONFIG_IP_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
#
# Ethernet (10 or 100Mbit)
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_INDYDOG=m
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
CONFIG_SGI_DS1286=m
# CONFIG_GEN_RTC is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
# CONFIG_XFS_POSIX_ACL is not set
CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:04 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:10 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
CONFIG_SGI_IP27=y
# CONFIG_SGI_IP32 is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_SGI_SN_M_MODE=y
# CONFIG_SGI_SN_N_MODE is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_NUMA=y
# CONFIG_MAPPED_KERNEL is not set
# CONFIG_REPLICATE_KTEXT is not set
# CONFIG_REPLICATE_EXHANDLERS is not set
+CONFIG_EARLY_PRINTK=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARC=y
CONFIG_DMA_IP27=y
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NUMA=y
+CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_NODES_SHIFT=6
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
+CONFIG_SMP=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_NR_CPUS=64
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_HZ=1000
-CONFIG_MIGRATION=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=64
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
# CONFIG_MIPS_INSANE_LARGE is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
+CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_SGI_IOC3_ETH=y
-CONFIG_SGI_IOC3_ETH_HW_RX_CSUM=y
-CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
CONFIG_SGI_IP27_RTC=y
# CONFIG_GEN_RTC is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_DEBUG_FS is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:05 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:11 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
CONFIG_SGI_IP32=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARC=y
CONFIG_DMA_IP32=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_BOARD_SCACHE=y
CONFIG_R5000_CPU_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:05 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:11 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_QTRONIX_KEYBOARD is not set
# CONFIG_IT8172_SCR0 is not set
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:06 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:12 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_QTRONIX_KEYBOARD=y
CONFIG_IT8172_SCR0=y
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:06 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:12 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
CONFIG_MOMENCO_JAGUAR_ATX=y
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_LIMITED_DMA=y
CONFIG_BOARD_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_HZ=1000
-# CONFIG_SMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
# Real Time Clock
#
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_SUNRPC=y
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:07 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:12 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_RTC_DS1742=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:07 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:12 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_MIPS_NILE4=y
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_BOARD_SCACHE=y
CONFIG_R5000_CPU_SCACHE=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:08 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:13 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
CONFIG_MIPS_MALTA=y
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_BOARD_SCACHE=y
+CONFIG_MIPS_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT=y
+# CONFIG_MIPS_MT_DISABLED is not set
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_MT_SMP is not set
CONFIG_MIPS_VPE_LOADER=y
+CONFIG_MIPS_MT=y
+CONFIG_SYS_SUPPORTS_MULTITHREADING=y
CONFIG_MIPS_MT_FPAFF=y
CONFIG_MIPS_VPE_LOADER_TOM=y
CONFIG_MIPS_VPE_APSP_API=y
CONFIG_MIPS_APSP_KSPD=y
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_CPU_HAS_LLSC=y
-# CONFIG_CPU_MIPSR2_IRQ_VI is not set
-# CONFIG_CPU_MIPSR2_IRQ_EI is not set
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
CONFIG_HZ_100=y
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
+CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_SECMARK=y
CONFIG_IP_NF_CONNTRACK_EVENTS=y
CONFIG_IP_NF_CONNTRACK_NETLINK=m
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_H323=m
+CONFIG_IP_NF_SIP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_NAT_H323=m
+CONFIG_IP_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
+CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
# CONFIG_QNX4FS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:09 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:13 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
CONFIG_MIPS_SIM=y
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT=y
+CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_MT_SMP is not set
-CONFIG_MIPS_VPE_LOADER=y
-CONFIG_MIPS_MT_FPAFF=y
-CONFIG_MIPS_VPE_LOADER_TOM=y
-CONFIG_MIPS_VPE_APSP_API=y
-CONFIG_MIPS_APSP_KSPD=y
+# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
# CONFIG_INOTIFY is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
CONFIG_CRC16=y
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:09 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:15 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
CONFIG_MACH_VR41XX=y
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
# CONFIG_BCM43XX is not set
+# CONFIG_ZD1211RW is not set
CONFIG_NET_WIRELESS=y
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
CONFIG_USB_PEGASUS=m
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
-# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_MON is not set
#
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:10 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:15 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_BOARD_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_HZ=1000
-# CONFIG_SMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:10 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:16 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_BOARD_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:11 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:16 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
CONFIG_MOMENCO_OCELOT=y
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_BOARD_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
#
# Ethernet (10 or 100Mbit)
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:11 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:16 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_BOARD_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:12 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:17 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_64BIT_PHYS_ADDR=y
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_AU1X00_GPIO is not set
# CONFIG_TS_AU1X00_ADS7846 is not set
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:13 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:17 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_64BIT_PHYS_ADDR=y
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# PHY device support
#
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
#
# MII PHY device drivers
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:13 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:17 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_64BIT_PHYS_ADDR=y
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# PHY device support
#
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
#
# MII PHY device drivers
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:14 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:18 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
-CONFIG_PNX8550_JBS=y
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
-# CONFIG_SGI_IP22 is not set
+# CONFIG_MARKEINS is not set
+CONFIG_SGI_IP22=y
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_BIGSUR is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARC=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_PNX8550=y
-CONFIG_SOC_PNX8550=y
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_ARC32=y
+CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_ARC_CONSOLE is not set
+CONFIG_ARC_PROMLIB=y
#
# CPU selection
#
-CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
+CONFIG_CPU_R4X00=y
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_HAS_CPU_R5000=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
#
# Kernel type
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_BOARD_SCACHE=y
+CONFIG_IP22_CPU_SCACHE=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-# CONFIG_PCI_DEBUG is not set
+CONFIG_HW_HAS_EISA=y
+# CONFIG_EISA is not set
CONFIG_MMU=y
#
#
# PCI Hotplug Support
#
-# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# Block devices
#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-CONFIG_BLK_DEV_OFFBOARD=y
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-CONFIG_BLK_DEV_HPT366=y
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
# SCSI low-level drivers
#
CONFIG_ISCSI_TCP=m
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SGIWD93_SCSI is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
# I2O device support
#
-# CONFIG_I2O is not set
#
# Network device support
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
#
# PHY device support
#
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-CONFIG_8139TOO_TUNE_TWISTER=y
-CONFIG_8139TOO_8129=y
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_LAN_SAA9730 is not set
+# CONFIG_SGISEEQ is not set
#
# Ethernet (1000 Mbit)
#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
#
# Token Ring devices
#
-# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
# Wan interfaces
#
# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_IP3106 is not set
-# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_IP22_ZILOG is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
+# CONFIG_SGI_DS1286 is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
+# CONFIG_SGI_NEWPORT_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
#
# USB support
#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-
-#
-# USB DSL modem support
-#
-
#
# USB Gadget Support
#
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
+CONFIG_SGI_PARTITION=y
#
# Native Language Support
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_SLAB_LEAK is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:14 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:18 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_C is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set
-CONFIG_PNX8550_V2PCI=y
+# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
-# CONFIG_SGI_IP22 is not set
+# CONFIG_MARKEINS is not set
+CONFIG_SGI_IP22=y
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_BIGSUR is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARC=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_PNX8550=y
-CONFIG_SOC_PNX8550=y
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_ARC32=y
+CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_ARC_CONSOLE is not set
+CONFIG_ARC_PROMLIB=y
#
# CPU selection
#
-CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
+CONFIG_CPU_R4X00=y
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_HAS_CPU_R5000=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
#
# Kernel type
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_BOARD_SCACHE=y
+CONFIG_IP22_CPU_SCACHE=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
+CONFIG_HW_HAS_EISA=y
+# CONFIG_EISA is not set
CONFIG_MMU=y
#
#
# PCI Hotplug Support
#
-# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# Block devices
#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI low-level drivers
#
CONFIG_ISCSI_TCP=m
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
-# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SGIWD93_SCSI is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
# I2O device support
#
-# CONFIG_I2O is not set
#
# Network device support
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
#
# PHY device support
#
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-CONFIG_NATSEMI=y
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_LAN_SAA9730 is not set
+# CONFIG_SGISEEQ is not set
#
# Ethernet (1000 Mbit)
#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
#
# Token Ring devices
#
-# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
# Wan interfaces
#
# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_MPPE=m
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_VT=y
# CONFIG_VT_CONSOLE is not set
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_IP3106 is not set
-# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_IP22_ZILOG is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
+# CONFIG_SGI_DS1286 is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
+# CONFIG_I2C_ALGO_SGI is not set
#
# I2C Hardware Bus support
#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_SMIVGX is not set
-# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
+# CONFIG_SGI_NEWPORT_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
#
# USB support
#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
#
# USB Gadget Support
#
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
+CONFIG_SGI_PARTITION=y
#
# Native Language Support
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:15 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:18 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
CONFIG_QEMU=y
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_COHERENT=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_I8259=y
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_SMP is not set
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
CONFIG_HZ_100=y
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
# CONFIG_EPOLL is not set
# CONFIG_SHMEM is not set
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=1
# CONFIG_SLOB is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
# Real Time Clock
#
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_SUNRPC=y
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:16 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:19 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
# CONFIG_EPOLL is not set
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
# CONFIG_IPW2100 is not set
CONFIG_IPW2200=m
# CONFIG_IPW2200_MONITOR is not set
-# CONFIG_IPW_QOS is not set
+# CONFIG_IPW2200_QOS is not set
# CONFIG_IPW2200_DEBUG is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
# CONFIG_BCM43XX is not set
+# CONFIG_ZD1211RW is not set
CONFIG_NET_WIRELESS=y
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
-# CONFIG_USB_ZD1201 is not set
CONFIG_USB_MON=y
#
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:16 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:19 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARC=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_HAS_CPU_R5000=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_BOARD_SCACHE=y
+CONFIG_R5000_CPU_SCACHE=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
+CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_SECMARK=y
CONFIG_IP_NF_CONNTRACK_EVENTS=y
CONFIG_IP_NF_CONNTRACK_NETLINK=m
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_H323=m
+CONFIG_IP_NF_SIP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_NAT_H323=m
+CONFIG_IP_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
#
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
+CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-# CONFIG_MD_RAID6 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Dallas's 1-wire bus
#
CONFIG_W1=m
+CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
-# CONFIG_W1_MASTER_DS9490 is not set
+# CONFIG_W1_MASTER_DS2490 is not set
#
# 1-wire Slaves
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ANYDATA=m
+# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
+# CONFIG_USB_CY7C63 is not set
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETSERVO=m
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=m
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
# CONFIG_XFS_POSIX_ACL is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:17 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:19 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_COHERENT=y
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_SIBYTE_DMA_PAGEOPS is not set
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_SB1_PASS_1_WORKAROUNDS=y
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_SYS_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_SMP=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_NR_CPUS=2
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_HZ=1000
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
+# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
CONFIG_SIBYTE_SB1250_DUART=y
CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_DEBUG_FS is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:17 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:20 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
CONFIG_MIPS_SEAD=y
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_CRC16=y
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Tue Apr 25 00:08:41 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:20 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
CONFIG_MACH_VR41XX=y
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_VR41XX=y
# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
#
# File systems
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Tue Apr 25 00:08:59 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:20 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
CONFIG_MACH_VR41XX=y
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_VR41XX=y
# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
#
# File systems
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Tue Apr 25 00:09:17 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:21 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
CONFIG_MACH_VR41XX=y
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_COMPOUND is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
# CONFIG_DNOTIFY is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Tue Apr 25 00:09:33 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:21 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
CONFIG_MACH_VR41XX=y
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16.11
-# Fri May 5 17:11:22 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:21 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_KMOD is not set
# Block layer
#
# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
CONFIG_MMU=y
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
# CONFIG_SERIAL_8250_EXTENDED is not set
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# Misc devices
#
-#
-# Multimedia Capabilities Port drivers
-#
-
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
#
# CONFIG_MMC is not set
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
#
# InfiniBand support
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE="console=ttyS0,115200n8"
CONFIG_CRC16=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:20 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 10:04:21 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
CONFIG_PMC_YOSEMITE=y
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_COHERENT=y
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_HIGHMEM=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_SYS_SUPPORTS_HIGHMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_SMP=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_NR_CPUS=2
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_HZ=1000
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
+CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
# Real Time Clock
#
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_SUNRPC=y
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
extern void vrc5477_irq_init(u32 base);
extern void mips_cpu_irq_init(u32 base);
-extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
void __init arch_init_irq(void)
ll_vrc5477_irq_enable( irq - vrc5477_irq_base);
}
-hw_irq_controller vrc5477_irq_controller = {
+struct irq_chip vrc5477_irq_controller = {
.typename = "vrc5477_irq",
.startup = vrc5477_irq_startup,
.shutdown = vrc5477_irq_shutdown,
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/ide.h>
+#include <linux/irq.h>
#include <linux/fs.h>
#include <linux/ioport.h>
#include <linux/param.h> /* for HZ */
mips_hpt_frequency = bus_frequency*(i+4)/4;
}
-extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
-
-static void __init ddb_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
#if defined(USE_CPU_COUNTER_TIMER)
set_io_port_base(KSEG1ADDR(DDB_PCI_IO_BASE));
board_time_init = ddb_time_init;
- board_timer_setup = ddb_timer_setup;
_machine_restart = ddb_machine_restart;
_machine_halt = ddb_machine_halt;
enable_ioasic_irq(irq);
}
-static struct hw_interrupt_type ioasic_irq_type = {
+static struct irq_chip ioasic_irq_type = {
.typename = "IO-ASIC",
.startup = startup_ioasic_irq,
.shutdown = shutdown_ioasic_irq,
end_ioasic_irq(irq);
}
-static struct hw_interrupt_type ioasic_dma_irq_type = {
+static struct irq_chip ioasic_dma_irq_type = {
.typename = "IO-ASIC-DMA",
.startup = startup_ioasic_dma_irq,
.shutdown = shutdown_ioasic_dma_irq,
enable_kn02_irq(irq);
}
-static struct hw_interrupt_type kn02_irq_type = {
+static struct irq_chip kn02_irq_type = {
.typename = "KN02-CSR",
.startup = startup_kn02_irq,
.shutdown = shutdown_kn02_irq,
extern void dec_time_init(void);
-extern void dec_timer_setup(struct irqaction *);
void __init plat_mem_setup(void)
{
board_be_init = dec_be_init;
board_time_init = dec_time_init;
- board_timer_setup = dec_timer_setup;
wbflush_setup();
EXPORT_SYMBOL(do_settimeofday);
-void __init dec_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
setup_irq(dec_interrupt[DEC_IRQ_RTC], irq);
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:50:54 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul 6 09:49:33 2006
#
CONFIG_MIPS=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
CONFIG_SGI_IP22=y
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARC=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_BOARD_SCACHE=y
CONFIG_IP22_CPU_SCACHE=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
+CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_SECMARK=y
CONFIG_IP_NF_CONNTRACK_EVENTS=y
CONFIG_IP_NF_CONNTRACK_NETLINK=m
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_H323=m
+CONFIG_IP_NF_SIP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_NAT_H323=m
+CONFIG_IP_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
#
# Ethernet (10 or 100Mbit)
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_INDYDOG=m
+# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
CONFIG_SGI_DS1286=m
# CONFIG_GEN_RTC is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
# CONFIG_XFS_POSIX_ACL is not set
CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/config.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
ll_emma2rh_irq_enable(irq - emma2rh_irq_base);
}
-hw_irq_controller emma2rh_irq_controller = {
+struct irq_chip emma2rh_irq_controller = {
.typename = "emma2rh_irq",
.startup = emma2rh_irq_startup,
.shutdown = emma2rh_irq_shutdown,
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/config.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/config.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
ll_emma2rh_sw_irq_enable(irq - emma2rh_sw_irq_base);
}
-hw_irq_controller emma2rh_sw_irq_controller = {
+struct irq_chip emma2rh_sw_irq_controller = {
.typename = "emma2rh_sw_irq",
.startup = emma2rh_sw_irq_startup,
.shutdown = emma2rh_sw_irq_shutdown,
ll_emma2rh_gpio_irq_enable(irq - emma2rh_gpio_irq_base);
}
-hw_irq_controller emma2rh_gpio_irq_controller = {
+struct irq_chip emma2rh_gpio_irq_controller = {
.typename = "emma2rh_gpio_irq",
.startup = emma2rh_gpio_irq_startup,
.shutdown = emma2rh_gpio_irq_shutdown,
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/config.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/config.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
mips_hpt_frequency = (bus_frequency * (4 + reg)) / 4 / 2;
}
-static void __init emma2rh_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
/* we are using the cpu counter for timer interrupts */
setup_irq(CPU_IRQ_BASE + 7, irq);
set_io_port_base(KSEG1ADDR(EMMA2RH_PCI_IO_BASE));
board_time_init = emma2rh_time_init;
- board_timer_setup = emma2rh_timer_setup;
_machine_restart = markeins_machine_restart;
_machine_halt = markeins_machine_halt;
enable_ev64120_irq(irq);
}
-static struct hw_interrupt_type ev64120_irq_type = {
+static struct irq_chip ev64120_irq_type = {
.typename = "EV64120",
.startup = startup_ev64120_irq,
.shutdown = shutdown_ev64120_irq,
/* Let's initialize our IRQ descriptors */
for (i = 0; i < NR_IRQS; i++) {
irq_desc[i].status = 0;
- irq_desc[i].chip = &no_irq_type;
+ irq_desc[i].chip = &no_irq_chip;
irq_desc[i].action = NULL;
irq_desc[i].depth = 0;
spin_lock_init(&irq_desc[i].lock);
* Copyright (C) 1996, 1997, 2004 by Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2006, Wind River System Inc. Rongkai.zhan <rongkai.zhan@windriver.com>
*/
-#include <linux/config.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/kernel.h>
void __init plat_mem_setup(void)
{
extern void wrppmc_time_init(void);
- extern void wrppmc_timer_setup(struct irqaction *);
extern void wrppmc_machine_restart(char *command);
extern void wrppmc_machine_halt(void);
extern void wrppmc_machine_power_off(void);
/* Use MIPS Count/Compare Timer */
board_time_init = wrppmc_time_init;
- board_timer_setup = wrppmc_timer_setup;
/* This makes the operations of 'in/out[bwl]' to the
* physical address ( < KSEG0) can work via KSEG1
* Copyright (C) 1996, 1997, 2004 by Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2006, Wind River System Inc.
*/
-#include <linux/config.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/kernel.h>
#define WRPPMC_CPU_CLK_FREQ 40000000 /* 40MHZ */
-void __init wrppmc_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
/* Install ISR for timer interrupt */
setup_irq(WRPPMC_MIPS_TIMER_IRQ, irq);
enable_it8172_irq(irq);
}
-static struct hw_interrupt_type it8172_irq_type = {
+static struct irq_chip it8172_irq_type = {
.typename = "ITE8172",
.startup = startup_ite_irq,
.shutdown = shutdown_ite_irq,
#define shutdown_none disable_none
#define end_none enable_none
-static struct hw_interrupt_type cp0_irq_type = {
+static struct irq_chip cp0_irq_type = {
.typename = "CP0 Count",
.startup = startup_none,
.shutdown = shutdown_none,
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ioport.h>
+#include <linux/irq.h>
#include <linux/serial_reg.h>
#include <linux/major.h>
#include <linux/kdev_t.h>
extern void it8172_halt(void);
extern void it8172_power_off(void);
-extern void (*board_time_init)(void);
-extern void (*board_timer_setup)(struct irqaction *irq);
extern void it8172_time_init(void);
-extern void it8172_timer_setup(struct irqaction *irq);
#ifdef CONFIG_IT8172_REVC
struct {
clear_c0_status(ST0_FR);
board_time_init = it8172_time_init;
- board_timer_setup = it8172_timer_setup;
_machine_restart = it8172_restart;
_machine_halt = it8172_halt;
}
#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
-void __init it8172_timer_setup(struct irqaction *irq)
+
+void __init plat_timer_setup(struct irqaction *irq)
{
puts("timer_setup\n");
put32(NR_IRQS);
enable_r4030_irq(irq);
}
-static struct hw_interrupt_type r4030_irq_type = {
+static struct irq_chip r4030_irq_type = {
.typename = "R4030",
.startup = startup_r4030_irq,
.shutdown = shutdown_r4030_irq,
extern void jazz_machine_halt(void);
extern void jazz_machine_power_off(void);
-static void __init jazz_time_init(struct irqaction *irq)
+void __init plat_time_init(struct irqaction *irq)
{
/* set the clock to 100 Hz */
r4030_write_reg32(JAZZ_TIMER_INTERVAL, 9);
for (i = 0; i < ARRAY_SIZE(jazz_io_resources); i++)
request_resource(&ioport_resource, jazz_io_resources + i);
- board_timer_setup = jazz_time_init;
/* The RTC is outside the port address space */
_machine_restart = jazz_machine_restart;
set_c0_status(ST0_IM); /* IE bit is still 0. */
}
-static hw_irq_controller jmr3927_irq_controller = {
+static struct irq_chip jmr3927_irq_controller = {
.typename = "jmr3927_irq",
.startup = jmr3927_irq_startup,
.shutdown = jmr3927_irq_shutdown,
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/ide.h>
+#include <linux/irq.h>
#include <linux/ioport.h>
#include <linux/param.h> /* for HZ */
#include <linux/delay.h>
}
unsigned long jmr3927_do_gettimeoffset(void);
-extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
-static void __init jmr3927_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
do_gettimeoffset = jmr3927_do_gettimeoffset;
set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO);
board_time_init = jmr3927_time_init;
- board_timer_setup = jmr3927_timer_setup;
_machine_restart = jmr3927_machine_restart;
_machine_halt = jmr3927_machine_halt;
* [This document is available from Microsoft at:
* http://www.microsoft.com/hwdev/busbios/amp_12.htm]
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/poll.h>
#include <linux/timer.h>
isa = (config0 & MIPS_CONF_AT) >> 13;
switch (isa) {
case 0:
- switch ((config0 >> 10) & 7) {
+ switch ((config0 & MIPS_CONF_AR) >> 10) {
case 0:
c->isa_level = MIPS_CPU_ISA_M32R1;
break;
}
break;
case 2:
- switch ((config0 >> 10) & 7) {
+ switch ((config0 & MIPS_CONF_AR) >> 10) {
case 0:
c->isa_level = MIPS_CPU_ISA_M64R1;
break;
return config3 & MIPS_CONF_M;
}
-static inline void decode_configs(struct cpuinfo_mips *c)
+static void __init decode_configs(struct cpuinfo_mips *c)
{
/* MIPS32 or MIPS64 compliant CPU. */
c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER |
RESTORE_AT
RESTORE_STATIC
FEXPORT(restore_partial) # restore partial frame
+#ifdef CONFIG_TRACE_IRQFLAGS
+ SAVE_STATIC
+ SAVE_AT
+ SAVE_TEMP
+ LONG_L v0, PT_STATUS(sp)
+ and v0, 1
+ beqz v0, 1f
+ jal trace_hardirqs_on
+ b 2f
+1: jal trace_hardirqs_off
+2:
+ RESTORE_TEMP
+ RESTORE_AT
+ RESTORE_STATIC
+#endif
RESTORE_SOME
RESTORE_SP_AND_RET
.set at
#include <asm/asm.h>
#include <asm/errno.h>
+#include <asm/irqflags.h>
#include <asm/mipsregs.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>
LONG_S $31, GDB_FR_REG31(sp)
CLI /* disable interrupts */
+ TRACE_IRQS_OFF
/*
* Followed by the floating point registers
#include <asm/asm.h>
#include <asm/asmmacro.h>
#include <asm/cacheops.h>
+#include <asm/irqflags.h>
#include <asm/regdef.h>
#include <asm/fpregdef.h>
#include <asm/mipsregs.h>
NESTED(handle_int, PT_SIZE, sp)
SAVE_ALL
CLI
+ TRACE_IRQS_OFF
PTR_LA ra, ret_from_irq
move a0, sp
_ehb
#endif /* CONFIG_MIPS_MT_SMTC */
CLI
+ TRACE_IRQS_OFF
move a0, sp
jalr v0
j ret_from_irq
.endm
.macro __build_clear_sti
+ TRACE_IRQS_ON
STI
.endm
.macro __build_clear_cli
CLI
+ TRACE_IRQS_OFF
.endm
.macro __build_clear_fpe
li a2, ~(0x3f << 12)
and a2, a1
ctc1 a2, fcr31
+ TRACE_IRQS_ON
STI
.endm
BUILD_HANDLER mdmx mdmx sti silent /* #22 */
BUILD_HANDLER watch watch sti verbose /* #23 */
BUILD_HANDLER mcheck mcheck cli verbose /* #24 */
- BUILD_HANDLER mt mt sti verbose /* #25 */
+ BUILD_HANDLER mt mt sti silent /* #25 */
BUILD_HANDLER dsp dsp sti silent /* #26 */
BUILD_HANDLER reserved reserved sti verbose /* others */
*
* Copyright (C) 1994, 1995 Waldorf Electronics
* Written by Ralf Baechle and Andreas Busse
- * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 Ralf Baechle
+ * Copyright (C) 1994 - 99, 2003, 06 Ralf Baechle
* Copyright (C) 1996 Paul M. Antoine
* Modified for DECStation and hence R3000 support by Paul M. Antoine
* Further modifications by David S. Miller and Harald Koerfgen
#include <asm/asm.h>
#include <asm/asmmacro.h>
+#include <asm/irqflags.h>
#include <asm/regdef.h>
#include <asm/page.h>
#include <asm/mipsregs.h>
return 0; /* never anything pending */
}
-static struct hw_interrupt_type i8259A_irq_type = {
+static struct irq_chip i8259A_irq_type = {
.typename = "XT-PIC",
.startup = startup_8259A_irq,
.shutdown = shutdown_8259A_irq,
return 1;
}
-#define roundup(x, y) ((((x)+((y)-1))/(y))*(y))
-
/* An ELF note in memory. */
struct memelfnote
{
#define shutdown_msc_irq disable_msc_irq
-struct hw_interrupt_type msc_levelirq_type = {
+struct irq_chip msc_levelirq_type = {
.typename = "SOC-it-Level",
.startup = startup_msc_irq,
.shutdown = shutdown_msc_irq,
.end = end_msc_irq,
};
-struct hw_interrupt_type msc_edgeirq_type = {
+struct irq_chip msc_edgeirq_type = {
.typename = "SOC-it-Edge",
.startup =startup_msc_irq,
.shutdown = shutdown_msc_irq,
#define shutdown_mv64340_irq disable_mv64340_irq
-struct hw_interrupt_type mv64340_irq_type = {
+struct irq_chip mv64340_irq_type = {
.typename = "MV-64340",
.startup = startup_mv64340_irq,
.shutdown = shutdown_mv64340_irq,
unmask_rm7k_irq(irq);
}
-static hw_irq_controller rm7k_irq_controller = {
+static struct irq_chip rm7k_irq_controller = {
.typename = "RM7000",
.startup = rm7k_cpu_irq_startup,
.shutdown = rm7k_cpu_irq_shutdown,
unmask_rm9k_irq(irq);
}
-static hw_irq_controller rm9k_irq_controller = {
+static struct irq_chip rm9k_irq_controller = {
.typename = "RM9000",
.startup = rm9k_cpu_irq_startup,
.shutdown = rm9k_cpu_irq_shutdown,
.end = rm9k_cpu_irq_end,
};
-static hw_irq_controller rm9k_perfcounter_irq = {
+static struct irq_chip rm9k_perfcounter_irq = {
.typename = "RM9000",
.startup = rm9k_perfcounter_irq_startup,
.shutdown = rm9k_perfcounter_irq_shutdown,
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = NULL;
irq_desc[i].depth = 1;
- irq_desc[i].chip = &no_irq_type;
+ irq_desc[i].chip = &no_irq_chip;
spin_lock_init(&irq_desc[i].lock);
#ifdef CONFIG_MIPS_MT_SMTC
irq_hwmask[i] = 0;
unmask_mips_irq(irq);
}
-static hw_irq_controller mips_cpu_irq_controller = {
+static struct irq_chip mips_cpu_irq_controller = {
.typename = "MIPS",
.startup = mips_cpu_irq_startup,
.shutdown = mips_cpu_irq_shutdown,
#define mips_mt_cpu_irq_end mips_cpu_irq_end
-static hw_irq_controller mips_mt_cpu_irq_controller = {
+static struct irq_chip mips_mt_cpu_irq_controller = {
.typename = "MIPS",
.startup = mips_mt_cpu_irq_startup,
.shutdown = mips_mt_cpu_irq_shutdown,
#include <linux/sched.h>
#include <linux/cpumask.h>
#include <linux/interrupt.h>
+#include <linux/security.h>
#include <asm/cpu.h>
#include <asm/processor.h>
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1995, 96, 97, 98, 99, 2000, 01, 02 by Ralf Baechle
+ * Copyright (C) 1995-99, 2000- 02, 06 Ralf Baechle <ralf@linux-mips.org>
* Copyright (C) 2001 MIPS Technologies, Inc.
* Copyright (C) 2004 Thiemo Seufer
*/
#include <linux/errno.h>
#include <asm/asm.h>
#include <asm/asmmacro.h>
+#include <asm/irqflags.h>
#include <asm/mipsregs.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>
NESTED(handle_sys, PT_SIZE, sp)
.set noat
SAVE_SOME
+#ifdef CONFIG_TRACE_IRQFLAGS
+ TRACE_IRQS_ON
+#ifdef CONFIG_64BIT
+ LONG_L $8, PT_R8(sp)
+ LONG_L $9, PT_R9(sp)
+#endif
+ LONG_L $7, PT_R7(sp)
+ LONG_L $6, PT_R6(sp)
+ LONG_L $5, PT_R5(sp)
+ LONG_L $4, PT_R4(sp)
+ LONG_L $2, PT_R2(sp)
+#endif
STI
.set at
sys sys_splice 4
sys sys_sync_file_range 7 /* 4305 */
sys sys_tee 4
+ sys sys_vmsplice 4
+ sys sys_move_pages 6
.endm
/* We pre-compute the number of _instruction_ bytes needed to
#include <linux/errno.h>
#include <asm/asm.h>
#include <asm/asmmacro.h>
+#include <asm/irqflags.h>
#include <asm/mipsregs.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>
*/
.set noat
SAVE_SOME
+ TRACE_IRQS_ON
STI
.set at
#endif
PTR sys_splice
PTR sys_sync_file_range
PTR sys_tee /* 5265 */
+ PTR sys_vmsplice
+ PTR sys_move_pages
#include <linux/errno.h>
#include <asm/asm.h>
#include <asm/asmmacro.h>
+#include <asm/irqflags.h>
#include <asm/mipsregs.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>
#ifndef CONFIG_MIPS32_O32
.set noat
SAVE_SOME
+ TRACE_IRQS_ON
STI
.set at
#endif
PTR sys_splice
PTR sys_sync_file_range
PTR sys_tee
+ PTR sys_vmsplice /* 6271 */
+ PTR sys_move_pages
#include <linux/errno.h>
#include <asm/asm.h>
#include <asm/asmmacro.h>
+#include <asm/irqflags.h>
#include <asm/mipsregs.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>
NESTED(handle_sys, PT_SIZE, sp)
.set noat
SAVE_SOME
+ TRACE_IRQS_ON
STI
.set at
ld t1, PT_EPC(sp) # skip syscall on return
PTR sys_splice
PTR sys32_sync_file_range /* 4305 */
PTR sys_tee
+ PTR sys_vmsplice
+ PTR compat_sys_move_pages
.size sys_call_table,.-sys_call_table
#include <linux/user.h>
#include <linux/utsname.h>
#include <linux/a.out.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/bootmem.h>
#include <linux/initrd.h>
#include <linux/major.h>
local_flush_tlb_mm((struct mm_struct *)mm);
}
+/*
+ * Special Variant of smp_call_function for use by TLB functions:
+ *
+ * o No return value
+ * o collapses to normal function call on UP kernels
+ * o collapses to normal function call on systems with a single shared
+ * primary cache.
+ * o CONFIG_MIPS_MT_SMTC currently implies there is only one physical core.
+ */
+static inline void smp_on_other_tlbs(void (*func) (void *info), void *info)
+{
+#ifndef CONFIG_MIPS_MT_SMTC
+ smp_call_function(func, info, 1, 1);
+#endif
+}
+
+static inline void smp_on_each_tlb(void (*func) (void *info), void *info)
+{
+ preempt_disable();
+
+ smp_on_other_tlbs(func, info);
+ func(info);
+
+ preempt_enable();
+}
+
/*
* The following tlb flush calls are invoked when old translations are
* being torn down, or pte attributes are changing. For single threaded
preempt_disable();
if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) {
- smp_call_function(flush_tlb_mm_ipi, (void *)mm, 1, 1);
+ smp_on_other_tlbs(flush_tlb_mm_ipi, (void *)mm);
} else {
int i;
for (i = 0; i < num_online_cpus(); i++)
fd.vma = vma;
fd.addr1 = start;
fd.addr2 = end;
- smp_call_function(flush_tlb_range_ipi, (void *)&fd, 1, 1);
+ smp_on_other_tlbs(flush_tlb_range_ipi, (void *)&fd);
} else {
int i;
for (i = 0; i < num_online_cpus(); i++)
fd.vma = vma;
fd.addr1 = page;
- smp_call_function(flush_tlb_page_ipi, (void *)&fd, 1, 1);
+ smp_on_other_tlbs(flush_tlb_page_ipi, (void *)&fd);
} else {
int i;
for (i = 0; i < num_online_cpus(); i++)
void flush_tlb_one(unsigned long vaddr)
{
- smp_call_function(flush_tlb_one_ipi, (void *) vaddr, 1, 1);
- local_flush_tlb_one(vaddr);
+ smp_on_each_tlb(flush_tlb_one_ipi, (void *) vaddr);
}
static DEFINE_PER_CPU(struct cpu, cpu_devices);
/* Save all will redundantly recompute the SP, but use it for now */
SAVE_ALL
CLI
+ TRACE_IRQS_OFF
move a0,sp
/* Function to be invoked passed stack pad slot 5 */
lw t0,PT_PADSLOT5(sp)
static int __init asidmask_set(char *str)
{
get_option(&str, &asidmask);
- switch(asidmask) {
+ switch (asidmask) {
case 0x1:
case 0x3:
case 0x7:
/*
* Only count if the MMU Type indicated is TLB
*/
- if(((read_vpe_c0_config() & MIPS_CONF_MT) >> 7) == 1) {
+ if (((read_vpe_c0_config() & MIPS_CONF_MT) >> 7) == 1) {
config1val = read_vpe_c0_config1();
tlbsiz += ((config1val >> 25) & 0x3f) + 1;
}
/* Set up coprocessor affinity CPU mask(s) */
for (tc = 0; tc < ntc; tc++) {
- if(cpu_data[tc].options & MIPS_CPU_FPU)
+ if (cpu_data[tc].options & MIPS_CPU_FPU)
cpu_set(tc, mt_fpu_cpumask);
}
{
/*
* Start timer on secondary VPEs if necessary.
- * mips_timer_setup should already have been invoked by init/main
+ * plat_timer_setup has already have been invoked by init/main
* on "boot" TC. Like per_cpu_trap_init() hack, this assumes that
* SMTC init code assigns TCs consdecutively and in ascending order
* to across available VPEs.
*/
- if(((read_c0_tcbind() & TCBIND_CURTC) != 0)
- && ((read_c0_tcbind() & TCBIND_CURVPE)
+ if (((read_c0_tcbind() & TCBIND_CURTC) != 0) &&
+ ((read_c0_tcbind() & TCBIND_CURVPE)
!= cpu_data[smp_processor_id() - 1].vpe_id)){
write_c0_compare (read_c0_count() + mips_hpt_frequency/HZ);
}
write_tc_c0_tchalt(0);
UNLOCK_CORE_PRA();
/* Try to reduce redundant timer interrupt messages */
- if(type == SMTC_CLOCK_TICK) {
- if(atomic_postincrement(&ipi_timer_latch[cpu])!=0) {
+ if (type == SMTC_CLOCK_TICK) {
+ if (atomic_postincrement(&ipi_timer_latch[cpu])!=0){
smtc_ipi_nq(&freeIPIq, pipi);
return;
}
* CU bit of Status is indicator that TC was
* already running on a kernel stack...
*/
- if(tcstatus & ST0_CU0) {
+ if (tcstatus & ST0_CU0) {
/* Note that this "- 1" is pointer arithmetic */
kstack = ((struct pt_regs *)read_tc_gpr_sp()) - 1;
} else {
smtc_ipi_nq(&freeIPIq, pipi);
switch (type_copy) {
- case SMTC_CLOCK_TICK:
- /* Invoke Clock "Interrupt" */
- ipi_timer_latch[dest_copy] = 0;
+ case SMTC_CLOCK_TICK:
+ /* Invoke Clock "Interrupt" */
+ ipi_timer_latch[dest_copy] = 0;
#ifdef SMTC_IDLE_HOOK_DEBUG
- clock_hang_reported[dest_copy] = 0;
+ clock_hang_reported[dest_copy] = 0;
#endif /* SMTC_IDLE_HOOK_DEBUG */
- local_timer_interrupt(0, NULL, regs);
+ local_timer_interrupt(0, NULL, regs);
+ break;
+ case LINUX_SMP_IPI:
+ switch ((int)arg_copy) {
+ case SMP_RESCHEDULE_YOURSELF:
+ ipi_resched_interrupt(regs);
break;
- case LINUX_SMP_IPI:
- switch ((int)arg_copy) {
- case SMP_RESCHEDULE_YOURSELF:
- ipi_resched_interrupt(regs);
- break;
- case SMP_CALL_FUNCTION:
- ipi_call_interrupt(regs);
- break;
- default:
- printk("Impossible SMTC IPI Argument 0x%x\n",
- (int)arg_copy);
- break;
- }
+ case SMP_CALL_FUNCTION:
+ ipi_call_interrupt(regs);
break;
default:
- printk("Impossible SMTC IPI Type 0x%x\n", type_copy);
+ printk("Impossible SMTC IPI Argument 0x%x\n",
+ (int)arg_copy);
break;
+ }
+ break;
+ default:
+ printk("Impossible SMTC IPI Type 0x%x\n", type_copy);
+ break;
}
}
* Test is not atomic, but much faster than a dequeue,
* and the vast majority of invocations will have a null queue.
*/
- if(IPIQ[q].head != NULL) {
+ if (IPIQ[q].head != NULL) {
while((pipi = smtc_ipi_dq(&IPIQ[q])) != NULL) {
/* ipi_decode() should be called with interrupts off */
local_irq_save(flags);
tlb_read();
ehb();
ehi = read_c0_entryhi();
- if((ehi & ASID_MASK) == asid) {
+ if ((ehi & ASID_MASK) == asid) {
/*
* Invalidate only entries with specified ASID,
* makiing sure all entries differ.
* 2) setup xtime based on rtc_mips_get_time().
* 3) choose a appropriate gettimeoffset routine.
* 4) calculate a couple of cached variables for later usage
- * 5) board_timer_setup() -
+ * 5) plat_timer_setup() -
* a) (optional) over-write any choices made above by time_init().
* b) machine specific code should setup the timer irqaction.
* c) enable the timer interrupt
*/
void (*board_time_init)(void);
-void (*board_timer_setup)(struct irqaction *irq);
unsigned int mips_hpt_frequency;
* to be NULL function so that we are sure the high-level code
* is not invoked accidentally.
*/
- board_timer_setup(&timer_irqaction);
+ plat_timer_setup(&timer_irqaction);
}
#define FEBRUARY 2
*/
asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
{
+ die_if_kernel("FP exception in kernel code", regs);
+
if (fcr31 & FPU_CSR_UNI_X) {
int sig;
{
int subcode;
- die_if_kernel("MIPS MT Thread exception in kernel", regs);
-
subcode = (read_vpe_c0_vpecontrol() & VPECONTROL_EXCPT)
>> VPECONTROL_EXCPT_SHIFT;
switch (subcode) {
case 0:
- printk(KERN_ERR "Thread Underflow\n");
+ printk(KERN_DEBUG "Thread Underflow\n");
break;
case 1:
- printk(KERN_ERR "Thread Overflow\n");
+ printk(KERN_DEBUG "Thread Overflow\n");
break;
case 2:
- printk(KERN_ERR "Invalid YIELD Qualifier\n");
+ printk(KERN_DEBUG "Invalid YIELD Qualifier\n");
break;
case 3:
- printk(KERN_ERR "Gating Storage Exception\n");
+ printk(KERN_DEBUG "Gating Storage Exception\n");
break;
case 4:
- printk(KERN_ERR "YIELD Scheduler Exception\n");
+ printk(KERN_DEBUG "YIELD Scheduler Exception\n");
break;
case 5:
- printk(KERN_ERR "Gating Storage Schedulier Exception\n");
+ printk(KERN_DEBUG "Gating Storage Schedulier Exception\n");
break;
default:
- printk(KERN_ERR "*** UNKNOWN THREAD EXCEPTION %d ***\n",
+ printk(KERN_DEBUG "*** UNKNOWN THREAD EXCEPTION %d ***\n",
subcode);
break;
}
unsigned long depc, old_epc;
unsigned int debug;
- printk("SDBBP EJTAG debug exception - not handled yet, just ignored!\n");
+ printk(KERN_DEBUG "SDBBP EJTAG debug exception - not handled yet, just ignored!\n");
depc = read_c0_depc();
debug = read_c0_debug();
- printk("c0_depc = %0*lx, DEBUG = %08x\n", field, depc, debug);
+ printk(KERN_DEBUG "c0_depc = %0*lx, DEBUG = %08x\n", field, depc, debug);
if (debug & 0x80000000) {
/*
* In branch delay slot.
write_c0_depc(depc);
#if 0
- printk("\n\n----- Enable EJTAG single stepping ----\n\n");
+ printk(KERN_DEBUG "\n\n----- Enable EJTAG single stepping ----\n\n");
write_c0_debug(debug | 0x100);
#endif
}
* i.e cat spapp >/dev/vpe1.
*/
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/fs.h>
enable_lasat_irq(irq);
}
-static struct hw_interrupt_type lasat_irq_type = {
+static struct irq_chip lasat_irq_type = {
.typename = "Lasat",
.startup = startup_lasat_irq,
.shutdown = shutdown_lasat_irq,
mips_hpt_frequency = lasat_board_info.li_cpu_hz / 2;
}
-static void lasat_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
-
- write_c0_compare(
- read_c0_count() +
- mips_hpt_frequency / HZ);
+ write_c0_compare( read_c0_count() + mips_hpt_frequency / HZ);
change_c0_status(ST0_IM, IE_IRQ0 | IE_IRQ5);
}
lasat_reboot_setup();
board_time_init = lasat_time_init;
- board_timer_setup = lasat_timer_setup;
#ifdef CONFIG_DS1603
ds1603 = &ds_defs[mips_machtype];
enable_atlas_irq(irq);
}
-static struct hw_interrupt_type atlas_irq_type = {
+static struct irq_chip atlas_irq_type = {
.typename = "Atlas",
.startup = startup_atlas_irq,
.shutdown = shutdown_atlas_irq,
extern void mips_reboot_setup(void);
extern void mips_time_init(void);
-extern void mips_timer_setup(struct irqaction *irq);
extern unsigned long mips_rtc_get_time(void);
#ifdef CONFIG_KGDB
mips_reboot_setup();
board_time_init = mips_time_init;
- board_timer_setup = mips_timer_setup;
rtc_mips_get_time = mips_rtc_get_time;
}
};
#endif
+/* determined physical memory size, not overridden by command line args */
+unsigned long physical_memsize = 0L;
+
struct prom_pmemblock * __init prom_getmdesc(void)
{
char *memsize_str;
unsigned int memsize;
char cmdline[CL_SIZE], *ptr;
- /* Check the command line first for a memsize directive */
- strcpy(cmdline, arcs_cmdline);
- ptr = strstr(cmdline, "memsize=");
- if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
- ptr = strstr(ptr, " memsize=");
-
- if (ptr) {
- memsize = memparse(ptr + 8, &ptr);
- }
- else {
- /* otherwise look in the environment */
- memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
- prom_printf("memsize not set in boot prom, set to default (32Mb)\n");
- memsize = 0x02000000;
- } else {
+ /* otherwise look in the environment */
+ memsize_str = prom_getenv("memsize");
+ if (!memsize_str) {
+ prom_printf("memsize not set in boot prom, set to default (32Mb)\n");
+ physical_memsize = 0x02000000;
+ } else {
#ifdef DEBUG
- prom_printf("prom_memsize = %s\n", memsize_str);
+ prom_printf("prom_memsize = %s\n", memsize_str);
#endif
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
+ physical_memsize = simple_strtol(memsize_str, NULL, 0);
}
#ifdef CONFIG_CPU_BIG_ENDIAN
- /*
- * SOC-it swaps, or perhaps doesn't swap, when DMA'ing the last
- * word of physical memory
- */
- memsize -= PAGE_SIZE;
+ /* SOC-it swaps, or perhaps doesn't swap, when DMA'ing the last
+ word of physical memory */
+ physical_memsize -= PAGE_SIZE;
#endif
+ /* Check the command line for a memsize directive that overrides
+ the physical/default amount */
+ strcpy(cmdline, arcs_cmdline);
+ ptr = strstr(cmdline, "memsize=");
+ if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
+ ptr = strstr(ptr, " memsize=");
+
+ if (ptr)
+ memsize = memparse(ptr + 8, &ptr);
+ else
+ memsize = physical_memsize;
+
memset(mdesc, 0, sizeof(mdesc));
mdesc[0].type = yamon_dontuse;
void __init mips_time_init(void)
{
- unsigned int est_freq, flags;
-
- local_irq_save(flags);
+ unsigned int est_freq;
/* Set Data mode - binary. */
CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
(est_freq%1000000)*100/1000000);
cpu_khz = est_freq / 1000;
-
- local_irq_restore(flags);
}
-void __init mips_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
if (cpu_has_veic) {
set_vi_handler (MSC01E_INT_CPUCTR, mips_timer_dispatch);
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/pci.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#ifdef CONFIG_MTD
#include <linux/mtd/partitions.h>
extern void mips_reboot_setup(void);
extern void mips_time_init(void);
-extern void mips_timer_setup(struct irqaction *irq);
extern unsigned long mips_rtc_get_time(void);
#ifdef CONFIG_KGDB
mips_reboot_setup();
board_time_init = mips_time_init;
- board_timer_setup = mips_timer_setup;
rtc_mips_get_time = mips_rtc_get_time;
}
extern void mips_reboot_setup(void);
extern void mips_time_init(void);
-extern void mips_timer_setup(struct irqaction *irq);
static void __init serial_init(void);
serial_init ();
board_time_init = mips_time_init;
- board_timer_setup = mips_timer_setup;
mips_reboot_setup();
}
# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
#
-obj-y := sim_setup.o sim_mem.o sim_time.o sim_printf.o sim_int.o sim_irq.o \
- sim_cmdline.o
+obj-y := sim_setup.o sim_mem.o sim_time.o sim_printf.o sim_int.o sim_cmdline.o
obj-$(CONFIG_SMP) += sim_smp.o
+++ /dev/null
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Interrupt exception dispatch code.
- */
-
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-/* A lot of complication here is taken away because:
- *
- * 1) We handle one interrupt and return, sitting in a loop and moving across
- * all the pending IRQ bits in the cause register is _NOT_ the answer, the
- * common case is one pending IRQ so optimize in that direction.
- *
- * 2) We need not check against bits in the status register IRQ mask, that
- * would make this routine slow as hell.
- *
- * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
- * between like BSD spl() brain-damage.
- *
- * Furthermore, the IRQs on the MIPS board look basically (barring software
- * IRQs which we don't use at all and all external interrupt sources are
- * combined together on hardware interrupt 0 (MIPS IRQ 2)) like:
- *
- * MIPS IRQ Source
- * -------- ------
- * 0 Software (ignored)
- * 1 Software (ignored)
- * 2 Combined hardware interrupt (hw0)
- * 3 Hardware (ignored)
- * 4 Hardware (ignored)
- * 5 Hardware (ignored)
- * 6 Hardware (ignored)
- * 7 R4k timer (what we use)
- *
- * Note: On the SEAD board thing are a little bit different.
- * Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired
- * wired to UART1.
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ---- R4k Timer
- * Lowest ---- Combined hardware interrupt
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-
- .text
- .set noreorder
- .set noat
- .align 5
- NESTED(mipsIRQ, PT_SIZE, sp)
- SAVE_ALL
- CLI
- .set at
-
- mfc0 s0, CP0_CAUSE # get irq bits
- mfc0 s1, CP0_STATUS # get irq mask
- and s0, s1
-
- /* First we check for r4k counter/timer IRQ. */
- andi a0, s0, CAUSEF_IP7
- beq a0, zero, 1f
- andi a0, s0, CAUSEF_IP2 # delay slot, check hw0 interrupt
-
- /* Wheee, a timer interrupt. */
- move a0, sp
- jal mips_timer_interrupt
- nop
-
- j ret_from_irq
- nop
-
-1:
-#if defined(CONFIG_MIPS_SEAD)
- beq a0, zero, 1f
- andi a0, s0, CAUSEF_IP3 # delay slot, check hw1 interrupt
-#else
- beq a0, zero, 1f # delay slot, check hw3 interrupt
- andi a0, s0, CAUSEF_IP5
-#endif
-
- /* Wheee, combined hardware level zero interrupt. */
-#if defined(CONFIG_MIPS_ATLAS)
- jal atlas_hw0_irqdispatch
-#elif defined(CONFIG_MIPS_MALTA)
- jal malta_hw0_irqdispatch
-#elif defined(CONFIG_MIPS_SEAD)
- jal sead_hw0_irqdispatch
-#else
-#error "MIPS board not supported\n"
-#endif
- move a0, sp # delay slot
-
- j ret_from_irq
- nop # delay slot
-
-1:
-#if defined(CONFIG_MIPS_SEAD)
- beq a0, zero, 1f
- andi a0, s0, CAUSEF_IP5 # delay slot, check hw3 interrupt
- jal sead_hw1_irqdispatch
- move a0, sp # delay slot
- j ret_from_irq
- nop # delay slot
-1:
-#endif
-#if defined(CONFIG_MIPS_MALTA)
- beq a0, zero, 1f # check hw3 (coreHI) interrupt
- nop
- jal corehi_irqdispatch
- move a0, sp
- j ret_from_irq
- nop
-1:
-#endif
- /*
- * Here by mistake? This is possible, what can happen is that by the
- * time we take the exception the IRQ pin goes low, so just leave if
- * this is the case.
- */
- move a1,s0
- PRINT("Got interrupt: c0_cause = %08x\n")
- mfc0 a1, CP0_EPC
- PRINT("c0_epc = %08x\n")
-
- j ret_from_irq
- nop
- END(mipsIRQ)
+++ /dev/null
-/*
- * Copyright (C) 1999, 2005 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Interrupt exception dispatch code.
- *
- */
-
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-#include <asm/mips-boards/simint.h>
-
-
- .text
- .set noreorder
- .set noat
- .align 5
- NESTED(simIRQ, PT_SIZE, sp)
- SAVE_ALL
- CLI
- .set at
-
- mfc0 s0, CP0_CAUSE # get irq bits
- mfc0 s1, CP0_STATUS # get irq mask
- andi s0, ST0_IM # CAUSE.CE may be non-zero!
- and s0, s1
-
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
- .set mips32
- clz a0, s0
- .set mips0
- negu a0
- addu a0, 31-CAUSEB_IP
- bltz a0, spurious
-#else
- beqz s0, spurious
- li a0, 7
-
- and t0, s0, 0xf000
- sltiu t0, t0, 1
- sll t0, 2
- subu a0, t0
- sll s0, t0
-
- and t0, s0, 0xc000
- sltiu t0, t0, 1
- sll t0, 1
- subu a0, t0
- sll s0, t0
-
- and t0, s0, 0x8000
- sltiu t0, t0, 1
- # sll t0, 0
- subu a0, t0
- # sll s0, t0
-#endif
-
-#ifdef CASCADE_IRQ
- li a1, CASCADE_IRQ
- bne a0, a1, 1f
- addu a0, MIPSCPU_INT_BASE
-
- jal CASCADE_DISPATCH
- move a0, sp
-
- j ret_from_irq
- nop
-1:
-#else
- addu a0, MIPSCPU_INT_BASE
-#endif
-
- jal do_IRQ
- move a1, sp
-
- j ret_from_irq
- nop
-
-
-spurious:
- jal spurious_interrupt
- nop
- j ret_from_irq
- nop
- END(simIRQ)
extern void sim_time_init(void);
-extern void sim_timer_setup(struct irqaction *irq);
static void __init serial_init(void);
unsigned int _isbonito = 0;
serial_init();
board_time_init = sim_time_init;
- board_timer_setup = sim_timer_setup;
prom_printf("Linux started...\n");
#ifdef CONFIG_MT_SMP
unsigned long cpu_khz;
-extern asmlinkage void ll_local_timer_interrupt(int irq, struct pt_regs *regs);
-
irqreturn_t sim_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
#ifdef CONFIG_SMP
}
-void __init sim_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
if (cpu_has_veic) {
set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
* secondary cache will result in any entries in the primary caches
* also getting invalidated which hopefully is a bit more economical.
*/
- if (cpu_has_subset_pcaches) {
+ if (cpu_has_inclusive_pcaches) {
unsigned long addr = (unsigned long) page_address(page);
r4k_blast_scache_page(addr);
/* Catch bad driver code */
BUG_ON(size == 0);
- if (cpu_has_subset_pcaches) {
+ if (cpu_has_inclusive_pcaches) {
if (size >= scache_size)
r4k_blast_scache();
else
/* Catch bad driver code */
BUG_ON(size == 0);
- if (cpu_has_subset_pcaches) {
+ if (cpu_has_inclusive_pcaches) {
if (size >= scache_size)
r4k_blast_scache();
else
break;
case CPU_VR4133:
- write_c0_config(config & ~CONF_EB);
+ write_c0_config(config & ~VR41_CONF_P4K);
case CPU_VR4131:
/* Workaround for cache instruction bug of VR4131 */
if (c->processor_id == 0x0c80U || c->processor_id == 0x0c81U ||
c->processor_id == 0x0c82U) {
- config &= ~0x00000030U;
- config |= 0x00410000U;
+ config |= 0x00400000U;
+ if (c->processor_id == 0x0c80U)
+ config |= VR41_CONF_BP;
write_c0_config(config);
- }
+ } else
+ c->options |= MIPS_CPU_CACHE_CDEX_P;
+
icache_size = 1 << (10 + ((config & CONF_IC) >> 9));
c->icache.linesz = 16 << ((config & CONF_IB) >> 5);
c->icache.ways = 2;
c->dcache.linesz = 16 << ((config & CONF_DB) >> 4);
c->dcache.ways = 2;
c->dcache.waybit = __ffs(dcache_size/2);
-
- c->options |= MIPS_CPU_CACHE_CDEX_P;
break;
case CPU_VR41XX:
printk("Unified secondary cache %ldkB %s, linesize %d bytes.\n",
scache_size >> 10, way_string[c->scache.ways], c->scache.linesz);
- c->options |= MIPS_CPU_SUBSET_CACHES;
+ c->options |= MIPS_CPU_INCLUSIVE_CACHES;
}
void au1x00_fixup_config_od(void)
#ifndef CONFIG_NEED_MULTIPLE_NODES
extern void pagetable_init(void);
+static int __init page_is_ram(unsigned long pagenr)
+{
+ int i;
+
+ for (i = 0; i < boot_mem_map.nr_map; i++) {
+ unsigned long addr, end;
+
+ if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
+ /* not usable memory */
+ continue;
+
+ addr = PFN_UP(boot_mem_map.map[i].addr);
+ end = PFN_DOWN(boot_mem_map.map[i].addr +
+ boot_mem_map.map[i].size);
+
+ if (pagenr >= addr && pagenr < end)
+ return 1;
+ }
+
+ return 0;
+}
+
void __init paging_init(void)
{
- unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0};
+ unsigned long zones_size[] = { [0 ... MAX_NR_ZONES - 1] = 0 };
unsigned long max_dma, high, low;
+#ifndef CONFIG_FLATMEM
+ unsigned long zholes_size[] = { [0 ... MAX_NR_ZONES - 1] = 0 };
+ unsigned long i, j, pfn;
+#endif
pagetable_init();
zones_size[ZONE_HIGHMEM] = high - low;
#endif
+#ifdef CONFIG_FLATMEM
free_area_init(zones_size);
-}
-
-static inline int page_is_ram(unsigned long pagenr)
-{
- int i;
-
- for (i = 0; i < boot_mem_map.nr_map; i++) {
- unsigned long addr, end;
-
- if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
- /* not usable memory */
- continue;
-
- addr = PFN_UP(boot_mem_map.map[i].addr);
- end = PFN_DOWN(boot_mem_map.map[i].addr +
- boot_mem_map.map[i].size);
-
- if (pagenr >= addr && pagenr < end)
- return 1;
- }
-
- return 0;
+#else
+ pfn = 0;
+ for (i = 0; i < MAX_NR_ZONES; i++)
+ for (j = 0; j < zones_size[i]; j++, pfn++)
+ if (!page_is_ram(pfn))
+ zholes_size[i]++;
+ free_area_init_node(0, NODE_DATA(0), zones_size, 0, zholes_size);
+#endif
}
static struct kcore_list kcore_mem, kcore_vmalloc;
#ifdef CONFIG_DISCONTIGMEM
#error "CONFIG_HIGHMEM and CONFIG_DISCONTIGMEM dont work together yet"
#endif
- max_mapnr = num_physpages = highend_pfn;
+ max_mapnr = highend_pfn;
#else
- max_mapnr = num_physpages = max_low_pfn;
+ max_mapnr = max_low_pfn;
#endif
high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
if (PageReserved(pfn_to_page(tmp)))
reservedpages++;
}
+ num_physpages = ram;
#ifdef CONFIG_HIGHMEM
for (tmp = highstart_pfn; tmp < highend_pfn; tmp++) {
totalhigh_pages++;
}
totalram_pages += totalhigh_pages;
+ num_physpages += totalhigh_pages;
#endif
codesize = (unsigned long) &_etext - (unsigned long) &_text;
printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
pfn = max_mapnr;
while (pfn-- > 0) {
+ if (!pfn_valid(pfn))
+ continue;
page = pfn_to_page(pfn);
total++;
if (PageHighMem(page))
*
* Synthesize TLB refill handlers at runtime.
*
- * Copyright (C) 2004,2005 by Thiemo Seufer
+ * Copyright (C) 2004,2005,2006 by Thiemo Seufer
* Copyright (C) 2005 Maciej W. Rozycki
* Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org)
*
#include <asm/smp.h>
#include <asm/war.h>
-/* #define DEBUG_TLB */
-
static __init int __attribute__((unused)) r45k_bvahwbug(void)
{
/* XXX: We should probe for the presence of this bug, but we don't. */
{
long pgdc = (long)pgd_current;
u32 *p;
+ int i;
memset(tlb_handler, 0, sizeof(tlb_handler));
p = tlb_handler;
if (p > tlb_handler + 32)
panic("TLB refill handler space exceeded");
- printk("Synthesized TLB refill handler (%u instructions).\n",
- (unsigned int)(p - tlb_handler));
-#ifdef DEBUG_TLB
- {
- int i;
+ pr_info("Synthesized TLB refill handler (%u instructions).\n",
+ (unsigned int)(p - tlb_handler));
- for (i = 0; i < (p - tlb_handler); i++)
- printk("%08x\n", tlb_handler[i]);
- }
-#endif
+ pr_debug("\t.set push\n");
+ pr_debug("\t.set noreorder\n");
+ for (i = 0; i < (p - tlb_handler); i++)
+ pr_debug("\t.word 0x%08x\n", tlb_handler[i]);
+ pr_debug("\t.set pop\n");
memcpy((void *)ebase, tlb_handler, 0x80);
}
struct reloc *r = relocs;
u32 *f;
unsigned int final_len;
+ int i;
memset(tlb_handler, 0, sizeof(tlb_handler));
memset(labels, 0, sizeof(labels));
#endif /* CONFIG_64BIT */
resolve_relocs(relocs, labels);
- printk("Synthesized TLB refill handler (%u instructions).\n",
- final_len);
-
-#ifdef DEBUG_TLB
- {
- int i;
+ pr_info("Synthesized TLB refill handler (%u instructions).\n",
+ final_len);
- f = final_handler;
+ f = final_handler;
#ifdef CONFIG_64BIT
- if (final_len > 32)
- final_len = 64;
- else
- f = final_handler + 32;
+ if (final_len > 32)
+ final_len = 64;
+ else
+ f = final_handler + 32;
#endif /* CONFIG_64BIT */
- for (i = 0; i < final_len; i++)
- printk("%08x\n", f[i]);
- }
-#endif
+ pr_debug("\t.set push\n");
+ pr_debug("\t.set noreorder\n");
+ for (i = 0; i < final_len; i++)
+ pr_debug("\t.word 0x%08x\n", f[i]);
+ pr_debug("\t.set pop\n");
memcpy((void *)ebase, final_handler, 0x100);
}
u32 *p = handle_tlbl;
struct label *l = labels;
struct reloc *r = relocs;
+ int i;
memset(handle_tlbl, 0, sizeof(handle_tlbl));
memset(labels, 0, sizeof(labels));
panic("TLB load handler fastpath space exceeded");
resolve_relocs(relocs, labels);
- printk("Synthesized TLB load handler fastpath (%u instructions).\n",
- (unsigned int)(p - handle_tlbl));
-
-#ifdef DEBUG_TLB
- {
- int i;
+ pr_info("Synthesized TLB load handler fastpath (%u instructions).\n",
+ (unsigned int)(p - handle_tlbl));
- for (i = 0; i < (p - handle_tlbl); i++)
- printk("%08x\n", handle_tlbl[i]);
- }
-#endif
+ pr_debug("\t.set push\n");
+ pr_debug("\t.set noreorder\n");
+ for (i = 0; i < (p - handle_tlbl); i++)
+ pr_debug("\t.word 0x%08x\n", handle_tlbl[i]);
+ pr_debug("\t.set pop\n");
}
static void __init build_r3000_tlb_store_handler(void)
u32 *p = handle_tlbs;
struct label *l = labels;
struct reloc *r = relocs;
+ int i;
memset(handle_tlbs, 0, sizeof(handle_tlbs));
memset(labels, 0, sizeof(labels));
panic("TLB store handler fastpath space exceeded");
resolve_relocs(relocs, labels);
- printk("Synthesized TLB store handler fastpath (%u instructions).\n",
- (unsigned int)(p - handle_tlbs));
+ pr_info("Synthesized TLB store handler fastpath (%u instructions).\n",
+ (unsigned int)(p - handle_tlbs));
-#ifdef DEBUG_TLB
- {
- int i;
-
- for (i = 0; i < (p - handle_tlbs); i++)
- printk("%08x\n", handle_tlbs[i]);
- }
-#endif
+ pr_debug("\t.set push\n");
+ pr_debug("\t.set noreorder\n");
+ for (i = 0; i < (p - handle_tlbs); i++)
+ pr_debug("\t.word 0x%08x\n", handle_tlbs[i]);
+ pr_debug("\t.set pop\n");
}
static void __init build_r3000_tlb_modify_handler(void)
u32 *p = handle_tlbm;
struct label *l = labels;
struct reloc *r = relocs;
+ int i;
memset(handle_tlbm, 0, sizeof(handle_tlbm));
memset(labels, 0, sizeof(labels));
panic("TLB modify handler fastpath space exceeded");
resolve_relocs(relocs, labels);
- printk("Synthesized TLB modify handler fastpath (%u instructions).\n",
- (unsigned int)(p - handle_tlbm));
+ pr_info("Synthesized TLB modify handler fastpath (%u instructions).\n",
+ (unsigned int)(p - handle_tlbm));
-#ifdef DEBUG_TLB
- {
- int i;
-
- for (i = 0; i < (p - handle_tlbm); i++)
- printk("%08x\n", handle_tlbm[i]);
- }
-#endif
+ pr_debug("\t.set push\n");
+ pr_debug("\t.set noreorder\n");
+ for (i = 0; i < (p - handle_tlbm); i++)
+ pr_debug("\t.word 0x%08x\n", handle_tlbm[i]);
+ pr_debug("\t.set pop\n");
}
/*
u32 *p = handle_tlbl;
struct label *l = labels;
struct reloc *r = relocs;
+ int i;
memset(handle_tlbl, 0, sizeof(handle_tlbl));
memset(labels, 0, sizeof(labels));
panic("TLB load handler fastpath space exceeded");
resolve_relocs(relocs, labels);
- printk("Synthesized TLB load handler fastpath (%u instructions).\n",
- (unsigned int)(p - handle_tlbl));
-
-#ifdef DEBUG_TLB
- {
- int i;
+ pr_info("Synthesized TLB load handler fastpath (%u instructions).\n",
+ (unsigned int)(p - handle_tlbl));
- for (i = 0; i < (p - handle_tlbl); i++)
- printk("%08x\n", handle_tlbl[i]);
- }
-#endif
+ pr_debug("\t.set push\n");
+ pr_debug("\t.set noreorder\n");
+ for (i = 0; i < (p - handle_tlbl); i++)
+ pr_debug("\t.word 0x%08x\n", handle_tlbl[i]);
+ pr_debug("\t.set pop\n");
}
static void __init build_r4000_tlb_store_handler(void)
u32 *p = handle_tlbs;
struct label *l = labels;
struct reloc *r = relocs;
+ int i;
memset(handle_tlbs, 0, sizeof(handle_tlbs));
memset(labels, 0, sizeof(labels));
panic("TLB store handler fastpath space exceeded");
resolve_relocs(relocs, labels);
- printk("Synthesized TLB store handler fastpath (%u instructions).\n",
- (unsigned int)(p - handle_tlbs));
-
-#ifdef DEBUG_TLB
- {
- int i;
+ pr_info("Synthesized TLB store handler fastpath (%u instructions).\n",
+ (unsigned int)(p - handle_tlbs));
- for (i = 0; i < (p - handle_tlbs); i++)
- printk("%08x\n", handle_tlbs[i]);
- }
-#endif
+ pr_debug("\t.set push\n");
+ pr_debug("\t.set noreorder\n");
+ for (i = 0; i < (p - handle_tlbs); i++)
+ pr_debug("\t.word 0x%08x\n", handle_tlbs[i]);
+ pr_debug("\t.set pop\n");
}
static void __init build_r4000_tlb_modify_handler(void)
u32 *p = handle_tlbm;
struct label *l = labels;
struct reloc *r = relocs;
+ int i;
memset(handle_tlbm, 0, sizeof(handle_tlbm));
memset(labels, 0, sizeof(labels));
panic("TLB modify handler fastpath space exceeded");
resolve_relocs(relocs, labels);
- printk("Synthesized TLB modify handler fastpath (%u instructions).\n",
- (unsigned int)(p - handle_tlbm));
-
-#ifdef DEBUG_TLB
- {
- int i;
-
- for (i = 0; i < (p - handle_tlbm); i++)
- printk("%08x\n", handle_tlbm[i]);
- }
-#endif
+ pr_info("Synthesized TLB modify handler fastpath (%u instructions).\n",
+ (unsigned int)(p - handle_tlbm));
+
+ pr_debug("\t.set push\n");
+ pr_debug("\t.set noreorder\n");
+ for (i = 0; i < (p - handle_tlbm); i++)
+ pr_debug("\t.word 0x%08x\n", handle_tlbm[i]);
+ pr_debug("\t.set pop\n");
}
void __init build_tlb_refill_handler(void)
return 0;
}
-void momenco_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
setup_irq(8, irq);
}
wire_stupidity_into_tlb();
mips_hpt_frequency = cpu_clock / 2;
- board_timer_setup = momenco_timer_setup;
rtc_mips_get_time = m48t37y_get_time;
rtc_mips_set_time = m48t37y_set_time;
return 0;
}
-void momenco_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
setup_irq(7, irq); /* Timer interrupt, unmask status IM7 */
}
* the Rm7900 and the Rm7065C
*/
mips_hpt_frequency = cpu_clock / 2;
- board_timer_setup = momenco_timer_setup;
rtc_mips_get_time = m48t37y_get_time;
rtc_mips_set_time = m48t37y_set_time;
#define shutdown_cpci_irq disable_cpci_irq
-struct hw_interrupt_type cpci_irq_type = {
+struct irq_chip cpci_irq_type = {
.typename = "CPCI/FPGA",
.startup = startup_cpci_irq,
.shutdown = shutdown_cpci_irq,
return 0;
}
-void momenco_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
setup_irq(7, irq);
}
#error Unknown CPU for this board
#endif
printk("momenco_time_init cpu_clock=%d\n", cpu_clock);
- board_timer_setup = momenco_timer_setup;
rtc_mips_get_time = m48t37y_get_time;
rtc_mips_set_time = m48t37y_set_time;
#define shutdown_uart_irq disable_uart_irq
-struct hw_interrupt_type uart_irq_type = {
+struct irq_chip uart_irq_type = {
.typename = "UART/FPGA",
.startup = startup_uart_irq,
.shutdown = shutdown_uart_irq,
default: \
BUG(); \
} \
+ return 0; \
} \
\
static inline void w_c0_ ## r ## n(unsigned int value) \
default: \
BUG(); \
} \
+ return; \
} \
__define_perf_accessors(perfcntr, 0, 2)
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <asm/vr41xx/mpc30x.h>
-#include <asm/vr41xx/vrc4173.h>
static const int internal_func_irqs[] __initdata = {
VRC4173_CASCADE_IRQ,
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/config.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/types.h>
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
}
}
-static struct hw_interrupt_type level_irq_type = {
+static struct irq_chip level_irq_type = {
.typename = "PNX Level IRQ",
.startup = startup_irq,
.shutdown = shutdown_irq,
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ioport.h>
+#include <linux/irq.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
extern void pnx8550_machine_power_off(void);
extern struct resource ioport_resource;
extern struct resource iomem_resource;
-extern void (*board_time_init)(void);
extern void pnx8550_time_init(void);
-extern void (*board_timer_setup)(struct irqaction *irq);
-extern void pnx8550_timer_setup(struct irqaction *irq);
extern void rs_kgdb_hook(int tty_no);
extern void prom_printf(char *fmt, ...);
extern char *prom_getcmdline(void);
pm_power_off = pnx8550_machine_power_off;
board_time_init = pnx8550_time_init;
- board_timer_setup = pnx8550_timer_setup;
/* Clear the Global 2 Register, PCI Inta Output Enable Registers
Bit 1:Enable DAC Powerdown
mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p));
}
-/*
- * pnx8550_timer_setup() - it does the following things:
- *
- * 5) board_timer_setup() -
- * a) (optional) over-write any choices made above by time_init().
- * b) machine specific code should setup the timer irqaction.
- * c) enable the timer interrupt
- */
-
-void __init pnx8550_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
int configPR;
return 0;
}
-void yosemite_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
setup_irq(7, irq);
}
void yosemite_time_init(void)
{
- board_timer_setup = yosemite_timer_setup;
mips_hpt_frequency = cpu_clock / 2;
mips_hpt_frequency = 33000000 * 3 * 5;
}
-#include <linux/config.h>
#include <asm/io.h>
#include <asm/reboot.h>
return "Qemu";
}
-static void __init qemu_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
/* set the clock to 100 Hz */
outb_p(0x34,0x43); /* binary, mode 2, LSB/MSB, ch 0 */
void __init plat_mem_setup(void)
{
set_io_port_base(QEMU_PORT_BASE);
- board_timer_setup = qemu_timer_setup;
-
qemu_reboot_setup();
}
enable_eisa1_irq(irq);
}
-static struct hw_interrupt_type ip22_eisa1_irq_type = {
+static struct irq_chip ip22_eisa1_irq_type = {
.typename = "IP22 EISA",
.startup = startup_eisa1_irq,
.shutdown = shutdown_eisa1_irq,
enable_eisa2_irq(irq);
}
-static struct hw_interrupt_type ip22_eisa2_irq_type = {
+static struct irq_chip ip22_eisa2_irq_type = {
.typename = "IP22 EISA",
.startup = startup_eisa2_irq,
.shutdown = shutdown_eisa2_irq,
enable_local0_irq(irq);
}
-static struct hw_interrupt_type ip22_local0_irq_type = {
+static struct irq_chip ip22_local0_irq_type = {
.typename = "IP22 local 0",
.startup = startup_local0_irq,
.shutdown = shutdown_local0_irq,
enable_local1_irq(irq);
}
-static struct hw_interrupt_type ip22_local1_irq_type = {
+static struct irq_chip ip22_local1_irq_type = {
.typename = "IP22 local 1",
.startup = startup_local1_irq,
.shutdown = shutdown_local1_irq,
enable_local2_irq(irq);
}
-static struct hw_interrupt_type ip22_local2_irq_type = {
+static struct irq_chip ip22_local2_irq_type = {
.typename = "IP22 local 2",
.startup = startup_local2_irq,
.shutdown = shutdown_local2_irq,
enable_local3_irq(irq);
}
-static struct hw_interrupt_type ip22_local3_irq_type = {
+static struct irq_chip ip22_local3_irq_type = {
.typename = "IP22 local 3",
.startup = startup_local3_irq,
.shutdown = shutdown_local3_irq,
mips_cpu_irq_init(SGINT_CPU);
for (i = SGINT_LOCAL0; i < SGI_INTERRUPTS; i++) {
- hw_irq_controller *handler;
+ struct irq_chip *handler;
if (i < SGINT_LOCAL1)
handler = &ip22_local0_irq_type;
* Ralf Baechle or David S. Miller (sorry guys, i'm really not sure)
*
* Copyright (C) 2001 by Ladislav Michl
- * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2003, 06 Ralf Baechle (ralf@linux-mips.org)
*/
#include <linux/bcd.h>
#include <linux/ds1286.h>
#include <linux/init.h>
+#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
save_control = hpc3c0->rtcregs[RTC_CMD] & 0xff;
hpc3c0->rtcregs[RTC_CMD] = save_control | RTC_TE;
- hpc3c0->rtcregs[RTC_YEAR] = BIN2BCD(tm.tm_sec);
+ hpc3c0->rtcregs[RTC_YEAR] = BIN2BCD(tm.tm_year);
hpc3c0->rtcregs[RTC_MONTH] = BIN2BCD(tm.tm_mon);
hpc3c0->rtcregs[RTC_DATE] = BIN2BCD(tm.tm_mday);
hpc3c0->rtcregs[RTC_HOURS] = BIN2BCD(tm.tm_hour);
irq_exit();
}
-extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
-
-static void indy_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
/* over-write the handler, we use our own way */
irq->handler = no_action;
rtc_mips_set_time = indy_rtc_set_time;
board_time_init = indy_time_init;
- board_timer_setup = indy_timer_setup;
}
struct bridge_controller *bc = IRQ_TO_BRIDGE(irq);
struct hub_data *hub = hub_data(cpu_to_node(bc->irq_cpu));
bridge_t *bridge = bc->base;
- struct slice_data *si = cpu_data[bc->irq_cpu].data;
int pin, swlevel;
cpuid_t cpu;
intr_disconnect_level(cpu, swlevel);
__clear_bit(swlevel, hub->irq_alloc_mask);
- si->level_to_irq[swlevel] = -1;
bridge->b_int_enable &= ~(1 << pin);
bridge->b_wid_tflush;
enable_bridge_irq(irq);
}
-static struct hw_interrupt_type bridge_irq_type = {
+static struct irq_chip bridge_irq_type = {
.typename = "bridge",
.startup = startup_bridge_irq,
.shutdown = shutdown_bridge_irq,
/*
- * Copytight (C) 1999, 2000, 05 Ralf Baechle (ralf@linux-mips.org)
+ * Copytight (C) 1999, 2000, 05, 06 Ralf Baechle (ralf@linux-mips.org)
* Copytight (C) 1999, 2000 Silicon Graphics, Inc.
*/
#include <linux/bcd.h>
return mktime(year, month, date, hour, min, sec);
}
-static void startup_rt_irq(unsigned int irq)
+static unsigned int startup_rt_irq(unsigned int irq)
{
+ return 0;
}
static void shutdown_rt_irq(unsigned int irq)
{
}
-static struct hw_interrupt_type rt_irq_type = {
+static struct irq_chip rt_irq_type = {
.typename = "SN HUB RT timer",
.startup = startup_rt_irq,
.shutdown = shutdown_rt_irq,
extern int allocate_irqno(void);
-static void ip27_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
int irqno = allocate_irqno();
if (irqno < 0)
panic("Can't allocate interrupt number for timer interrupt");
- irq_desc[irqno].status = IRQ_DISABLED;
- irq_desc[irqno].action = NULL;
- irq_desc[irqno].depth = 1;
- irq_desc[irqno].handler = &rt_irq_type;
+ irq_desc[irqno].status = IRQ_DISABLED;
+ irq_desc[irqno].action = NULL;
+ irq_desc[irqno].depth = 1;
+ irq_desc[irqno].chip = &rt_irq_type;
/* over-write the handler, we use our own way */
irq->handler = no_action;
irq_desc[irqno].status |= IRQ_PER_CPU;
rt_timer_irq = irqno;
+ /*
+ * Only needed to get /proc/interrupt to display timer irq stats
+ */
+ setup_irq(irqno, &rt_irqaction);
}
void __init ip27_time_init(void)
xtime.tv_nsec = 0;
do_gettimeoffset = ip27_do_gettimeoffset;
-
- board_timer_setup = ip27_timer_setup;
}
void __init cpu_time_init(void)
#define shutdown_cpu_irq disable_cpu_irq
#define mask_and_ack_cpu_irq disable_cpu_irq
-static struct hw_interrupt_type ip32_cpu_interrupt = {
+static struct irq_chip ip32_cpu_interrupt = {
.typename = "IP32 CPU",
.startup = startup_cpu_irq,
.shutdown = shutdown_cpu_irq,
#define shutdown_crime_irq disable_crime_irq
-static struct hw_interrupt_type ip32_crime_interrupt = {
+static struct irq_chip ip32_crime_interrupt = {
.typename = "IP32 CRIME",
.startup = startup_crime_irq,
.shutdown = shutdown_crime_irq,
#define shutdown_macepci_irq disable_macepci_irq
#define mask_and_ack_macepci_irq disable_macepci_irq
-static struct hw_interrupt_type ip32_macepci_interrupt = {
+static struct irq_chip ip32_macepci_interrupt = {
.typename = "IP32 MACE PCI",
.startup = startup_macepci_irq,
.shutdown = shutdown_macepci_irq,
MACEISA_KEYB_POLL_INT | \
MACEISA_MOUSE_INT | \
MACEISA_MOUSE_POLL_INT | \
- MACEIIRQF_TIMER0_INT | \
- MACEIIRQF_TIMER1_INT | \
- MACEIIRQF_TIMER2_INT)
+ MACEISA_TIMER0_INT | \
+ MACEISA_TIMER1_INT | \
+ MACEISA_TIMER2_INT)
#define MACEISA_SUPERIO_INT (MACEISA_PARALLEL_INT | \
MACEISA_PAR_CTXA_INT | \
MACEISA_PAR_CTXB_INT | \
case MACEISA_AUDIO_SW_IRQ ... MACEISA_AUDIO3_MERR_IRQ:
crime_int = MACE_AUDIO_INT;
break;
- case MACEISA_RTC_IRQ ... MACEIIRQF_TIMER2_IRQ:
+ case MACEISA_RTC_IRQ ... MACEISA_TIMER2_IRQ:
crime_int = MACE_MISC_INT;
break;
case MACEISA_PARALLEL_IRQ ... MACEISA_SERIAL2_RDMAOR_IRQ:
#define shutdown_maceisa_irq disable_maceisa_irq
-static struct hw_interrupt_type ip32_maceisa_interrupt = {
+static struct irq_chip ip32_maceisa_interrupt = {
.typename = "IP32 MACE ISA",
.startup = startup_maceisa_irq,
.shutdown = shutdown_maceisa_irq,
#define shutdown_mace_irq disable_mace_irq
#define mask_and_ack_mace_irq disable_mace_irq
-static struct hw_interrupt_type ip32_mace_interrupt = {
+static struct irq_chip ip32_mace_interrupt = {
.typename = "IP32 MACE",
.startup = startup_mace_irq,
.shutdown = shutdown_mace_irq,
mace->perif.ctrl.imask = 0;
for (irq = 0; irq <= IP32_IRQ_MAX; irq++) {
- hw_irq_controller *controller;
+ struct irq_chip *controller;
if (irq == IP32_R4K_TIMER_IRQ)
controller = &ip32_cpu_interrupt;
*
* Copyright (C) 2000 Harald Koerfgen
* Copyright (C) 2002, 2003, 2005 Ilya A. Volynets
+ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
*/
#include <linux/console.h>
#include <linux/init.h>
printk("%d MHz CPU detected\n", mips_hpt_frequency * 2 / 1000000);
}
-void __init ip32_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
irq->handler = no_action;
setup_irq(IP32_R4K_TIMER_IRQ, irq);
rtc_mips_set_mmss = mc146818_set_rtc_mmss;
board_time_init = ip32_time_init;
- board_timer_setup = ip32_timer_setup;
#ifdef CONFIG_SERIAL_8250
{
#endif
#endif
-static struct hw_interrupt_type bcm1480_irq_type = {
+static struct irq_chip bcm1480_irq_type = {
.typename = "BCM1480-IMR",
.startup = startup_bcm1480_irq,
.shutdown = shutdown_bcm1480_irq,
{
int i = 0, old_cpu, cpu, int_on, k;
u64 cur_ints;
- irq_desc_t *desc = irq_desc + irq;
+ struct irq_desc *desc = irq_desc + irq;
unsigned long flags;
unsigned int irq_dirty;
irq_desc[i].chip = &bcm1480_irq_type;
bcm1480_irq_owner[i] = 0;
} else {
- irq_desc[i].chip = &no_irq_type;
+ irq_desc[i].chip = &no_irq_chip;
}
}
}
int bcm1480_steal_irq(int irq)
{
- irq_desc_t *desc = irq_desc + irq;
+ struct irq_desc *desc = irq_desc + irq;
unsigned long flags;
int retval = 0;
#ifdef CONFIG_SIBYTE_BCM1480_PROF
if (pending & CAUSEF_IP7) /* Cpu performance counter interrupt */
sbprof_cpu_intr(exception_epc(regs));
+ else
#endif
if (pending & CAUSEF_IP4)
bcm1480_timer_interrupt(regs);
#ifdef CONFIG_SMP
- if (pending & CAUSEF_IP3)
+ else if (pending & CAUSEF_IP3)
bcm1480_mailbox_interrupt(regs);
#endif
#ifdef CONFIG_KGDB
- if (pending & CAUSEF_IP6)
+ else if (pending & CAUSEF_IP6)
bcm1480_kgdb_interrupt(regs); /* KGDB (uart 1) */
#endif
- if (pending & CAUSEF_IP2) {
+ else if (pending & CAUSEF_IP2) {
unsigned long long mask_h, mask_l;
unsigned long base;
mask_l = __raw_readq(
IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L));
- if (!mask_h) {
+ if (mask_h) {
if (mask_h ^ 1)
do_IRQ(63 - dclz(mask_h), regs);
else
#endif
#endif
-static struct hw_interrupt_type sb1250_irq_type = {
+static struct irq_chip sb1250_irq_type = {
.typename = "SB1250-IMR",
.startup = startup_sb1250_irq,
.shutdown = shutdown_sb1250_irq,
{
int i = 0, old_cpu, cpu, int_on;
u64 cur_ints;
- irq_desc_t *desc = irq_desc + irq;
+ struct irq_desc *desc = irq_desc + irq;
unsigned long flags;
i = first_cpu(mask);
irq_desc[i].chip = &sb1250_irq_type;
sb1250_irq_owner[i] = 0;
} else {
- irq_desc[i].chip = &no_irq_type;
+ irq_desc[i].chip = &no_irq_chip;
}
}
}
int sb1250_steal_irq(int irq)
{
- irq_desc_t *desc = irq_desc + irq;
+ struct irq_desc *desc = irq_desc + irq;
unsigned long flags;
int retval = 0;
pending = read_c0_cause();
#ifdef CONFIG_SIBYTE_SB1250_PROF
- if (pending & CAUSEF_IP7) { /* Cpu performance counter interrupt */
+ if (pending & CAUSEF_IP7) /* Cpu performance counter interrupt */
sbprof_cpu_intr(exception_epc(regs));
- }
+ else
#endif
if (pending & CAUSEF_IP4)
sb1250_timer_interrupt(regs);
#ifdef CONFIG_SMP
- if (pending & CAUSEF_IP3)
+ else if (pending & CAUSEF_IP3)
sb1250_mailbox_interrupt(regs);
#endif
#ifdef CONFIG_KGDB
- if (pending & CAUSEF_IP6) /* KGDB (uart 1) */
+ else if (pending & CAUSEF_IP6) /* KGDB (uart 1) */
sb1250_kgdb_interrupt(regs);
#endif
- if (pending & CAUSEF_IP2) {
+ else if (pending & CAUSEF_IP2) {
unsigned long long mask;
/*
#include <linux/blkdev.h>
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/initrd.h>
#include <asm/irq.h>
#endif
}
-void __init swarm_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
/*
* we don't set up irqaction, because we will deliver timer
panic_timeout = 5; /* For debug. */
board_time_init = swarm_time_init;
- board_timer_setup = swarm_timer_setup;
board_be_handler = swarm_be_handler;
if (xicor_probe()) {
enable_pciasic_irq(irq);
}
-static struct hw_interrupt_type pciasic_irq_type = {
+static struct irq_chip pciasic_irq_type = {
.typename = "ASIC-PCI",
.startup = startup_pciasic_irq,
.shutdown = shutdown_pciasic_irq,
#include <linux/pci.h>
#include <linux/console.h>
#include <linux/fb.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#ifdef CONFIG_ARC
#include <asm/arc/types.h>
extern void sni_machine_halt(void);
extern void sni_machine_power_off(void);
-static void __init sni_rm200_pci_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
/* set the clock to 100 Hz */
outb_p(0x34,0x43); /* binary, mode 2, LSB/MSB, ch 0 */
#endif
sni_resource_init();
- board_timer_setup = sni_rm200_pci_timer_setup;
_machine_restart = sni_machine_restart;
_machine_halt = sni_machine_halt;
static DEFINE_SPINLOCK(tx4927_pic_lock);
#define TX4927_CP0_NAME "TX4927-CP0"
-static struct hw_interrupt_type tx4927_irq_cp0_type = {
+static struct irq_chip tx4927_irq_cp0_type = {
.typename = TX4927_CP0_NAME,
.startup = tx4927_irq_cp0_startup,
.shutdown = tx4927_irq_cp0_shutdown,
};
#define TX4927_PIC_NAME "TX4927-PIC"
-static struct hw_interrupt_type tx4927_irq_pic_type = {
+static struct irq_chip tx4927_irq_pic_type = {
.typename = TX4927_PIC_NAME,
.startup = tx4927_irq_pic_startup,
.shutdown = tx4927_irq_pic_shutdown,
#undef DEBUG
void __init tx4927_time_init(void);
-void __init tx4927_timer_setup(struct irqaction *irq);
void dump_cp0(char *key);
void __init plat_mem_setup(void)
{
board_time_init = tx4927_time_init;
- board_timer_setup = tx4927_timer_setup;
__wbflush = tx4927_write_buffer_flush;
#ifdef CONFIG_TOSHIBA_RBTX4927
}
-void __init tx4927_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
u32 count;
u32 c1;
#define TOSHIBA_RBTX4927_IOC_NAME "RBTX4927-IOC"
-static struct hw_interrupt_type toshiba_rbtx4927_irq_ioc_type = {
+static struct irq_chip toshiba_rbtx4927_irq_ioc_type = {
.typename = TOSHIBA_RBTX4927_IOC_NAME,
.startup = toshiba_rbtx4927_irq_ioc_startup,
.shutdown = toshiba_rbtx4927_irq_ioc_shutdown,
#ifdef CONFIG_TOSHIBA_FPCIB0
#define TOSHIBA_RBTX4927_ISA_NAME "RBTX4927-ISA"
-static struct hw_interrupt_type toshiba_rbtx4927_irq_isa_type = {
+static struct irq_chip toshiba_rbtx4927_irq_isa_type = {
.typename = TOSHIBA_RBTX4927_ISA_NAME,
.startup = toshiba_rbtx4927_irq_isa_startup,
.shutdown = toshiba_rbtx4927_irq_isa_shutdown,
DEFINE_SPINLOCK(tx4938_pic_lock);
#define TX4938_CP0_NAME "TX4938-CP0"
-static struct hw_interrupt_type tx4938_irq_cp0_type = {
+static struct irq_chip tx4938_irq_cp0_type = {
.typename = TX4938_CP0_NAME,
.startup = tx4938_irq_cp0_startup,
.shutdown = tx4938_irq_cp0_shutdown,
};
#define TX4938_PIC_NAME "TX4938-PIC"
-static struct hw_interrupt_type tx4938_irq_pic_type = {
+static struct irq_chip tx4938_irq_pic_type = {
.typename = TX4938_PIC_NAME,
.startup = tx4938_irq_pic_startup,
.shutdown = tx4938_irq_pic_shutdown,
void __init tx4938_setup(void);
void __init tx4938_time_init(void);
-void __init tx4938_timer_setup(struct irqaction *irq);
void dump_cp0(char *key);
void (*__wbflush) (void);
plat_mem_setup(void)
{
board_time_init = tx4938_time_init;
- board_timer_setup = tx4938_timer_setup;
__wbflush = tx4938_write_buffer_flush;
toshiba_rbtx4938_setup();
}
rbtx4938_time_init();
}
-void __init
-tx4938_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
u32 count;
u32 c1;
DEFINE_SPINLOCK(toshiba_rbtx4938_ioc_lock);
#define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC"
-static struct hw_interrupt_type toshiba_rbtx4938_irq_ioc_type = {
+static struct irq_chip toshiba_rbtx4938_irq_ioc_type = {
.typename = TOSHIBA_RBTX4938_IOC_NAME,
.startup = toshiba_rbtx4938_irq_ioc_startup,
.shutdown = toshiba_rbtx4938_irq_ioc_shutdown,
depends on MACH_VR41XX && HW_HAS_PCI
default y
select PCI
-
-config VRC4173
- tristate "Add NEC VRC4173 companion chip support"
- depends on MACH_VR41XX && PCI_VR41XX
- help
- The NEC VRC4173 is a companion chip for NEC VR4122/VR4131.
/*
* setup.c, Setup for the CASIO CASSIOPEIA E-11/15/55/65.
*
- * Copyright (C) 2002-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/ioport.h>
#include <asm/io.h>
-#include <asm/vr41xx/e55.h>
+
+#define E55_ISA_IO_BASE 0x1400c000
+#define E55_ISA_IO_SIZE 0x03ff4000
+#define E55_ISA_IO_START 0
+#define E55_ISA_IO_END (E55_ISA_IO_SIZE - 1)
+#define E55_IO_PORT_BASE KSEG1ADDR(E55_ISA_IO_BASE)
static int __init casio_e55_setup(void)
{
- set_io_port_base(IO_PORT_BASE);
- ioport_resource.start = IO_PORT_RESOURCE_START;
- ioport_resource.end = IO_PORT_RESOURCE_END;
+ set_io_port_base(E55_IO_PORT_BASE);
+ ioport_resource.start = E55_ISA_IO_START;
+ ioport_resource.end = E55_ISA_IO_END;
return 0;
}
# Makefile for common code of the NEC VR4100 series.
#
-obj-y += bcu.o cmu.o icu.o init.o irq.o pmu.o type.o
-obj-$(CONFIG_VRC4173) += vrc4173.o
+obj-y += bcu.o cmu.o icu.o init.o irq.o pmu.o type.o
EXTRA_AFLAGS := $(CFLAGS)
#include <asm/cpu.h>
#include <asm/io.h>
+#include <asm/vr41xx/irq.h>
#include <asm/vr41xx/vr41xx.h>
static void __iomem *icu1_base;
void vr41xx_enable_piuint(uint16_t mask)
{
- irq_desc_t *desc = irq_desc + PIU_IRQ;
+ struct irq_desc *desc = irq_desc + PIU_IRQ;
unsigned long flags;
if (current_cpu_data.cputype == CPU_VR4111 ||
void vr41xx_disable_piuint(uint16_t mask)
{
- irq_desc_t *desc = irq_desc + PIU_IRQ;
+ struct irq_desc *desc = irq_desc + PIU_IRQ;
unsigned long flags;
if (current_cpu_data.cputype == CPU_VR4111 ||
void vr41xx_enable_aiuint(uint16_t mask)
{
- irq_desc_t *desc = irq_desc + AIU_IRQ;
+ struct irq_desc *desc = irq_desc + AIU_IRQ;
unsigned long flags;
if (current_cpu_data.cputype == CPU_VR4111 ||
void vr41xx_disable_aiuint(uint16_t mask)
{
- irq_desc_t *desc = irq_desc + AIU_IRQ;
+ struct irq_desc *desc = irq_desc + AIU_IRQ;
unsigned long flags;
if (current_cpu_data.cputype == CPU_VR4111 ||
void vr41xx_enable_kiuint(uint16_t mask)
{
- irq_desc_t *desc = irq_desc + KIU_IRQ;
+ struct irq_desc *desc = irq_desc + KIU_IRQ;
unsigned long flags;
if (current_cpu_data.cputype == CPU_VR4111 ||
void vr41xx_disable_kiuint(uint16_t mask)
{
- irq_desc_t *desc = irq_desc + KIU_IRQ;
+ struct irq_desc *desc = irq_desc + KIU_IRQ;
unsigned long flags;
if (current_cpu_data.cputype == CPU_VR4111 ||
void vr41xx_enable_dsiuint(uint16_t mask)
{
- irq_desc_t *desc = irq_desc + DSIU_IRQ;
+ struct irq_desc *desc = irq_desc + DSIU_IRQ;
unsigned long flags;
spin_lock_irqsave(&desc->lock, flags);
void vr41xx_disable_dsiuint(uint16_t mask)
{
- irq_desc_t *desc = irq_desc + DSIU_IRQ;
+ struct irq_desc *desc = irq_desc + DSIU_IRQ;
unsigned long flags;
spin_lock_irqsave(&desc->lock, flags);
void vr41xx_enable_firint(uint16_t mask)
{
- irq_desc_t *desc = irq_desc + FIR_IRQ;
+ struct irq_desc *desc = irq_desc + FIR_IRQ;
unsigned long flags;
spin_lock_irqsave(&desc->lock, flags);
void vr41xx_disable_firint(uint16_t mask)
{
- irq_desc_t *desc = irq_desc + FIR_IRQ;
+ struct irq_desc *desc = irq_desc + FIR_IRQ;
unsigned long flags;
spin_lock_irqsave(&desc->lock, flags);
void vr41xx_enable_pciint(void)
{
- irq_desc_t *desc = irq_desc + PCI_IRQ;
+ struct irq_desc *desc = irq_desc + PCI_IRQ;
unsigned long flags;
if (current_cpu_data.cputype == CPU_VR4122 ||
void vr41xx_disable_pciint(void)
{
- irq_desc_t *desc = irq_desc + PCI_IRQ;
+ struct irq_desc *desc = irq_desc + PCI_IRQ;
unsigned long flags;
if (current_cpu_data.cputype == CPU_VR4122 ||
void vr41xx_enable_scuint(void)
{
- irq_desc_t *desc = irq_desc + SCU_IRQ;
+ struct irq_desc *desc = irq_desc + SCU_IRQ;
unsigned long flags;
if (current_cpu_data.cputype == CPU_VR4122 ||
void vr41xx_disable_scuint(void)
{
- irq_desc_t *desc = irq_desc + SCU_IRQ;
+ struct irq_desc *desc = irq_desc + SCU_IRQ;
unsigned long flags;
if (current_cpu_data.cputype == CPU_VR4122 ||
void vr41xx_enable_csiint(uint16_t mask)
{
- irq_desc_t *desc = irq_desc + CSI_IRQ;
+ struct irq_desc *desc = irq_desc + CSI_IRQ;
unsigned long flags;
if (current_cpu_data.cputype == CPU_VR4122 ||
void vr41xx_disable_csiint(uint16_t mask)
{
- irq_desc_t *desc = irq_desc + CSI_IRQ;
+ struct irq_desc *desc = irq_desc + CSI_IRQ;
unsigned long flags;
if (current_cpu_data.cputype == CPU_VR4122 ||
void vr41xx_enable_bcuint(void)
{
- irq_desc_t *desc = irq_desc + BCU_IRQ;
+ struct irq_desc *desc = irq_desc + BCU_IRQ;
unsigned long flags;
if (current_cpu_data.cputype == CPU_VR4122 ||
void vr41xx_disable_bcuint(void)
{
- irq_desc_t *desc = irq_desc + BCU_IRQ;
+ struct irq_desc *desc = irq_desc + BCU_IRQ;
unsigned long flags;
if (current_cpu_data.cputype == CPU_VR4122 ||
icu1_set(MSYSINT1REG, 1 << SYSINT1_IRQ_TO_PIN(irq));
}
-static struct hw_interrupt_type sysint1_irq_type = {
+static struct irq_chip sysint1_irq_type = {
.typename = "SYSINT1",
.startup = startup_sysint1_irq,
.shutdown = shutdown_sysint1_irq,
icu2_set(MSYSINT2REG, 1 << SYSINT2_IRQ_TO_PIN(irq));
}
-static struct hw_interrupt_type sysint2_irq_type = {
+static struct irq_chip sysint2_irq_type = {
.typename = "SYSINT2",
.startup = startup_sysint2_irq,
.shutdown = shutdown_sysint2_irq,
static inline int set_sysint1_assign(unsigned int irq, unsigned char assign)
{
- irq_desc_t *desc = irq_desc + irq;
+ struct irq_desc *desc = irq_desc + irq;
uint16_t intassign0, intassign1;
unsigned int pin;
static inline int set_sysint2_assign(unsigned int irq, unsigned char assign)
{
- irq_desc_t *desc = irq_desc + irq;
+ struct irq_desc *desc = irq_desc + irq;
uint16_t intassign2, intassign3;
unsigned int pin;
#include <asm/bootinfo.h>
#include <asm/time.h>
+#include <asm/vr41xx/irq.h>
#include <asm/vr41xx/vr41xx.h>
#define IO_MEM_RESOURCE_START 0UL
mips_hpt_frequency = tclock / 4;
}
-static void __init setup_timer_irq(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
{
setup_irq(TIMER_IRQ, irq);
}
static void __init timer_init(void)
{
board_time_init = setup_timer_frequency;
- board_timer_setup = setup_timer_irq;
}
void __init plat_mem_setup(void)
#include <asm/irq_cpu.h>
#include <asm/system.h>
-#include <asm/vr41xx/vr41xx.h>
+#include <asm/vr41xx/irq.h>
typedef struct irq_cascade {
int (*get_irq)(unsigned int, struct pt_regs *);
static void irq_dispatch(unsigned int irq, struct pt_regs *regs)
{
irq_cascade_t *cascade;
- irq_desc_t *desc;
+ struct irq_desc *desc;
if (irq >= NR_IRQS) {
atomic_inc(&irq_err_count);
+++ /dev/null
-/*
- * vrc4173.c, NEC VRC4173 base driver for NEC VR4122/VR4131.
- *
- * Copyright (C) 2001-2003 MontaVista Software Inc.
- * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com>
- * Copyright (C) 2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
- * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-
-#include <asm/vr41xx/vr41xx.h>
-#include <asm/vr41xx/vrc4173.h>
-
-MODULE_DESCRIPTION("NEC VRC4173 base driver for NEC VR4122/4131");
-MODULE_AUTHOR("Yoichi Yuasa <yyuasa@mvista.com>");
-MODULE_LICENSE("GPL");
-
-#define VRC4173_CMUCLKMSK 0x040
- #define MSKPIU 0x0001
- #define MSKKIU 0x0002
- #define MSKAIU 0x0004
- #define MSKPS2CH1 0x0008
- #define MSKPS2CH2 0x0010
- #define MSKUSB 0x0020
- #define MSKCARD1 0x0040
- #define MSKCARD2 0x0080
- #define MSKAC97 0x0100
- #define MSK48MUSB 0x0400
- #define MSK48MPIN 0x0800
- #define MSK48MOSC 0x1000
-#define VRC4173_CMUSRST 0x042
- #define USBRST 0x0001
- #define CARD1RST 0x0002
- #define CARD2RST 0x0004
- #define AC97RST 0x0008
-
-#define VRC4173_SYSINT1REG 0x060
-#define VRC4173_MSYSINT1REG 0x06c
-#define VRC4173_MPIUINTREG 0x06e
-#define VRC4173_MAIUINTREG 0x070
-#define VRC4173_MKIUINTREG 0x072
-
-#define VRC4173_SELECTREG 0x09e
- #define SEL3 0x0008
- #define SEL2 0x0004
- #define SEL1 0x0002
- #define SEL0 0x0001
-
-static struct pci_device_id vrc4173_id_table[] __devinitdata = {
- { .vendor = PCI_VENDOR_ID_NEC,
- .device = PCI_DEVICE_ID_NEC_VRC4173,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID, },
- { .vendor = 0, },
-};
-
-unsigned long vrc4173_io_offset = 0;
-
-EXPORT_SYMBOL(vrc4173_io_offset);
-
-static int vrc4173_initialized;
-static uint16_t vrc4173_cmuclkmsk;
-static uint16_t vrc4173_selectreg;
-static DEFINE_SPINLOCK(vrc4173_cmu_lock);
-static DEFINE_SPINLOCK(vrc4173_giu_lock);
-
-static inline void set_cmusrst(uint16_t val)
-{
- uint16_t cmusrst;
-
- cmusrst = vrc4173_inw(VRC4173_CMUSRST);
- cmusrst |= val;
- vrc4173_outw(cmusrst, VRC4173_CMUSRST);
-}
-
-static inline void clear_cmusrst(uint16_t val)
-{
- uint16_t cmusrst;
-
- cmusrst = vrc4173_inw(VRC4173_CMUSRST);
- cmusrst &= ~val;
- vrc4173_outw(cmusrst, VRC4173_CMUSRST);
-}
-
-void vrc4173_supply_clock(vrc4173_clock_t clock)
-{
- if (vrc4173_initialized) {
- spin_lock_irq(&vrc4173_cmu_lock);
-
- switch (clock) {
- case VRC4173_PIU_CLOCK:
- vrc4173_cmuclkmsk |= MSKPIU;
- break;
- case VRC4173_KIU_CLOCK:
- vrc4173_cmuclkmsk |= MSKKIU;
- break;
- case VRC4173_AIU_CLOCK:
- vrc4173_cmuclkmsk |= MSKAIU;
- break;
- case VRC4173_PS2_CH1_CLOCK:
- vrc4173_cmuclkmsk |= MSKPS2CH1;
- break;
- case VRC4173_PS2_CH2_CLOCK:
- vrc4173_cmuclkmsk |= MSKPS2CH2;
- break;
- case VRC4173_USBU_PCI_CLOCK:
- set_cmusrst(USBRST);
- vrc4173_cmuclkmsk |= MSKUSB;
- break;
- case VRC4173_CARDU1_PCI_CLOCK:
- set_cmusrst(CARD1RST);
- vrc4173_cmuclkmsk |= MSKCARD1;
- break;
- case VRC4173_CARDU2_PCI_CLOCK:
- set_cmusrst(CARD2RST);
- vrc4173_cmuclkmsk |= MSKCARD2;
- break;
- case VRC4173_AC97U_PCI_CLOCK:
- set_cmusrst(AC97RST);
- vrc4173_cmuclkmsk |= MSKAC97;
- break;
- case VRC4173_USBU_48MHz_CLOCK:
- set_cmusrst(USBRST);
- vrc4173_cmuclkmsk |= MSK48MUSB;
- break;
- case VRC4173_EXT_48MHz_CLOCK:
- if (vrc4173_cmuclkmsk & MSK48MOSC)
- vrc4173_cmuclkmsk |= MSK48MPIN;
- else
- printk(KERN_WARNING
- "vrc4173_supply_clock: "
- "Please supply VRC4173_48MHz_CLOCK first "
- "rather than VRC4173_EXT_48MHz_CLOCK.\n");
- break;
- case VRC4173_48MHz_CLOCK:
- vrc4173_cmuclkmsk |= MSK48MOSC;
- break;
- default:
- printk(KERN_WARNING
- "vrc4173_supply_clock: Invalid CLOCK value %u\n", clock);
- break;
- }
-
- vrc4173_outw(vrc4173_cmuclkmsk, VRC4173_CMUCLKMSK);
-
- switch (clock) {
- case VRC4173_USBU_PCI_CLOCK:
- case VRC4173_USBU_48MHz_CLOCK:
- clear_cmusrst(USBRST);
- break;
- case VRC4173_CARDU1_PCI_CLOCK:
- clear_cmusrst(CARD1RST);
- break;
- case VRC4173_CARDU2_PCI_CLOCK:
- clear_cmusrst(CARD2RST);
- break;
- case VRC4173_AC97U_PCI_CLOCK:
- clear_cmusrst(AC97RST);
- break;
- default:
- break;
- }
-
- spin_unlock_irq(&vrc4173_cmu_lock);
- }
-}
-
-EXPORT_SYMBOL(vrc4173_supply_clock);
-
-void vrc4173_mask_clock(vrc4173_clock_t clock)
-{
- if (vrc4173_initialized) {
- spin_lock_irq(&vrc4173_cmu_lock);
-
- switch (clock) {
- case VRC4173_PIU_CLOCK:
- vrc4173_cmuclkmsk &= ~MSKPIU;
- break;
- case VRC4173_KIU_CLOCK:
- vrc4173_cmuclkmsk &= ~MSKKIU;
- break;
- case VRC4173_AIU_CLOCK:
- vrc4173_cmuclkmsk &= ~MSKAIU;
- break;
- case VRC4173_PS2_CH1_CLOCK:
- vrc4173_cmuclkmsk &= ~MSKPS2CH1;
- break;
- case VRC4173_PS2_CH2_CLOCK:
- vrc4173_cmuclkmsk &= ~MSKPS2CH2;
- break;
- case VRC4173_USBU_PCI_CLOCK:
- set_cmusrst(USBRST);
- vrc4173_cmuclkmsk &= ~MSKUSB;
- break;
- case VRC4173_CARDU1_PCI_CLOCK:
- set_cmusrst(CARD1RST);
- vrc4173_cmuclkmsk &= ~MSKCARD1;
- break;
- case VRC4173_CARDU2_PCI_CLOCK:
- set_cmusrst(CARD2RST);
- vrc4173_cmuclkmsk &= ~MSKCARD2;
- break;
- case VRC4173_AC97U_PCI_CLOCK:
- set_cmusrst(AC97RST);
- vrc4173_cmuclkmsk &= ~MSKAC97;
- break;
- case VRC4173_USBU_48MHz_CLOCK:
- set_cmusrst(USBRST);
- vrc4173_cmuclkmsk &= ~MSK48MUSB;
- break;
- case VRC4173_EXT_48MHz_CLOCK:
- vrc4173_cmuclkmsk &= ~MSK48MPIN;
- break;
- case VRC4173_48MHz_CLOCK:
- vrc4173_cmuclkmsk &= ~MSK48MOSC;
- break;
- default:
- printk(KERN_WARNING "vrc4173_mask_clock: Invalid CLOCK value %u\n", clock);
- break;
- }
-
- vrc4173_outw(vrc4173_cmuclkmsk, VRC4173_CMUCLKMSK);
-
- switch (clock) {
- case VRC4173_USBU_PCI_CLOCK:
- case VRC4173_USBU_48MHz_CLOCK:
- clear_cmusrst(USBRST);
- break;
- case VRC4173_CARDU1_PCI_CLOCK:
- clear_cmusrst(CARD1RST);
- break;
- case VRC4173_CARDU2_PCI_CLOCK:
- clear_cmusrst(CARD2RST);
- break;
- case VRC4173_AC97U_PCI_CLOCK:
- clear_cmusrst(AC97RST);
- break;
- default:
- break;
- }
-
- spin_unlock_irq(&vrc4173_cmu_lock);
- }
-}
-
-EXPORT_SYMBOL(vrc4173_mask_clock);
-
-static inline void vrc4173_cmu_init(void)
-{
- vrc4173_cmuclkmsk = vrc4173_inw(VRC4173_CMUCLKMSK);
-
- spin_lock_init(&vrc4173_cmu_lock);
-}
-
-void vrc4173_select_function(vrc4173_function_t function)
-{
- if (vrc4173_initialized) {
- spin_lock_irq(&vrc4173_giu_lock);
-
- switch(function) {
- case PS2_CHANNEL1:
- vrc4173_selectreg |= SEL2;
- break;
- case PS2_CHANNEL2:
- vrc4173_selectreg |= SEL1;
- break;
- case TOUCHPANEL:
- vrc4173_selectreg &= SEL2 | SEL1 | SEL0;
- break;
- case KEYBOARD_8SCANLINES:
- vrc4173_selectreg &= SEL3 | SEL2 | SEL1;
- break;
- case KEYBOARD_10SCANLINES:
- vrc4173_selectreg &= SEL3 | SEL2;
- break;
- case KEYBOARD_12SCANLINES:
- vrc4173_selectreg &= SEL3;
- break;
- case GPIO_0_15PINS:
- vrc4173_selectreg |= SEL0;
- break;
- case GPIO_16_20PINS:
- vrc4173_selectreg |= SEL3;
- break;
- }
-
- vrc4173_outw(vrc4173_selectreg, VRC4173_SELECTREG);
-
- spin_unlock_irq(&vrc4173_giu_lock);
- }
-}
-
-EXPORT_SYMBOL(vrc4173_select_function);
-
-static inline void vrc4173_giu_init(void)
-{
- vrc4173_selectreg = vrc4173_inw(VRC4173_SELECTREG);
-
- spin_lock_init(&vrc4173_giu_lock);
-}
-
-void vrc4173_enable_piuint(uint16_t mask)
-{
- irq_desc_t *desc = irq_desc + VRC4173_PIU_IRQ;
- unsigned long flags;
- uint16_t val;
-
- spin_lock_irqsave(&desc->lock, flags);
- val = vrc4173_inw(VRC4173_MPIUINTREG);
- val |= mask;
- vrc4173_outw(val, VRC4173_MPIUINTREG);
- spin_unlock_irqrestore(&desc->lock, flags);
-}
-
-EXPORT_SYMBOL(vrc4173_enable_piuint);
-
-void vrc4173_disable_piuint(uint16_t mask)
-{
- irq_desc_t *desc = irq_desc + VRC4173_PIU_IRQ;
- unsigned long flags;
- uint16_t val;
-
- spin_lock_irqsave(&desc->lock, flags);
- val = vrc4173_inw(VRC4173_MPIUINTREG);
- val &= ~mask;
- vrc4173_outw(val, VRC4173_MPIUINTREG);
- spin_unlock_irqrestore(&desc->lock, flags);
-}
-
-EXPORT_SYMBOL(vrc4173_disable_piuint);
-
-void vrc4173_enable_aiuint(uint16_t mask)
-{
- irq_desc_t *desc = irq_desc + VRC4173_AIU_IRQ;
- unsigned long flags;
- uint16_t val;
-
- spin_lock_irqsave(&desc->lock, flags);
- val = vrc4173_inw(VRC4173_MAIUINTREG);
- val |= mask;
- vrc4173_outw(val, VRC4173_MAIUINTREG);
- spin_unlock_irqrestore(&desc->lock, flags);
-}
-
-EXPORT_SYMBOL(vrc4173_enable_aiuint);
-
-void vrc4173_disable_aiuint(uint16_t mask)
-{
- irq_desc_t *desc = irq_desc + VRC4173_AIU_IRQ;
- unsigned long flags;
- uint16_t val;
-
- spin_lock_irqsave(&desc->lock, flags);
- val = vrc4173_inw(VRC4173_MAIUINTREG);
- val &= ~mask;
- vrc4173_outw(val, VRC4173_MAIUINTREG);
- spin_unlock_irqrestore(&desc->lock, flags);
-}
-
-EXPORT_SYMBOL(vrc4173_disable_aiuint);
-
-void vrc4173_enable_kiuint(uint16_t mask)
-{
- irq_desc_t *desc = irq_desc + VRC4173_KIU_IRQ;
- unsigned long flags;
- uint16_t val;
-
- spin_lock_irqsave(&desc->lock, flags);
- val = vrc4173_inw(VRC4173_MKIUINTREG);
- val |= mask;
- vrc4173_outw(val, VRC4173_MKIUINTREG);
- spin_unlock_irqrestore(&desc->lock, flags);
-}
-
-EXPORT_SYMBOL(vrc4173_enable_kiuint);
-
-void vrc4173_disable_kiuint(uint16_t mask)
-{
- irq_desc_t *desc = irq_desc + VRC4173_KIU_IRQ;
- unsigned long flags;
- uint16_t val;
-
- spin_lock_irqsave(&desc->lock, flags);
- val = vrc4173_inw(VRC4173_MKIUINTREG);
- val &= ~mask;
- vrc4173_outw(val, VRC4173_MKIUINTREG);
- spin_unlock_irqrestore(&desc->lock, flags);
-}
-
-EXPORT_SYMBOL(vrc4173_disable_kiuint);
-
-static void enable_vrc4173_irq(unsigned int irq)
-{
- uint16_t val;
-
- val = vrc4173_inw(VRC4173_MSYSINT1REG);
- val |= (uint16_t)1 << (irq - VRC4173_IRQ_BASE);
- vrc4173_outw(val, VRC4173_MSYSINT1REG);
-}
-
-static void disable_vrc4173_irq(unsigned int irq)
-{
- uint16_t val;
-
- val = vrc4173_inw(VRC4173_MSYSINT1REG);
- val &= ~((uint16_t)1 << (irq - VRC4173_IRQ_BASE));
- vrc4173_outw(val, VRC4173_MSYSINT1REG);
-}
-
-static unsigned int startup_vrc4173_irq(unsigned int irq)
-{
- enable_vrc4173_irq(irq);
- return 0; /* never anything pending */
-}
-
-#define shutdown_vrc4173_irq disable_vrc4173_irq
-#define ack_vrc4173_irq disable_vrc4173_irq
-
-static void end_vrc4173_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- enable_vrc4173_irq(irq);
-}
-
-static struct hw_interrupt_type vrc4173_irq_type = {
- .typename = "VRC4173",
- .startup = startup_vrc4173_irq,
- .shutdown = shutdown_vrc4173_irq,
- .enable = enable_vrc4173_irq,
- .disable = disable_vrc4173_irq,
- .ack = ack_vrc4173_irq,
- .end = end_vrc4173_irq,
-};
-
-static int vrc4173_get_irq_number(int irq)
-{
- uint16_t status, mask;
- int i;
-
- status = vrc4173_inw(VRC4173_SYSINT1REG);
- mask = vrc4173_inw(VRC4173_MSYSINT1REG);
-
- status &= mask;
- if (status) {
- for (i = 0; i < 16; i++)
- if (status & (0x0001 << i))
- return VRC4173_IRQ(i);
- }
-
- return -EINVAL;
-}
-
-static inline int vrc4173_icu_init(int cascade_irq)
-{
- int i;
-
- if (cascade_irq < GIU_IRQ(0) || cascade_irq > GIU_IRQ(15))
- return -EINVAL;
-
- vrc4173_outw(0, VRC4173_MSYSINT1REG);
-
- vr41xx_set_irq_trigger(GIU_IRQ_TO_PIN(cascade_irq), TRIGGER_LEVEL, SIGNAL_THROUGH);
- vr41xx_set_irq_level(GIU_IRQ_TO_PIN(cascade_irq), LEVEL_LOW);
-
- for (i = VRC4173_IRQ_BASE; i <= VRC4173_IRQ_LAST; i++)
- irq_desc[i].chip = &vrc4173_irq_type;
-
- return 0;
-}
-
-static int __devinit vrc4173_probe(struct pci_dev *dev,
- const struct pci_device_id *id)
-{
- unsigned long start, flags;
- int err;
-
- err = pci_enable_device(dev);
- if (err < 0) {
- printk(KERN_ERR "vrc4173: Failed to enable PCI device, aborting\n");
- return err;
- }
-
- pci_set_master(dev);
-
- start = pci_resource_start(dev, 0);
- if (start == 0) {
- printk(KERN_ERR "vrc4173:No such PCI I/O resource, aborting\n");
- return -ENXIO;
- }
-
- flags = pci_resource_flags(dev, 0);
- if ((flags & IORESOURCE_IO) == 0) {
- printk(KERN_ERR "vrc4173: No such PCI I/O resource, aborting\n");
- return -ENXIO;
- }
-
- err = pci_request_regions(dev, "NEC VRC4173");
- if (err < 0) {
- printk(KERN_ERR "vrc4173: PCI resources are busy, aborting\n");
- return err;
- }
-
- set_vrc4173_io_offset(start);
-
- vrc4173_cmu_init();
- vrc4173_giu_init();
-
- err = vrc4173_icu_init(dev->irq);
- if (err < 0) {
- printk(KERN_ERR "vrc4173: Invalid IRQ %d, aborting\n", dev->irq);
- return err;
- }
-
- err = vr41xx_cascade_irq(dev->irq, vrc4173_get_irq_number);
- if (err < 0) {
- printk(KERN_ERR "vrc4173: IRQ resource %d is busy, aborting\n", dev->irq);
- return err;
- }
-
- printk(KERN_INFO
- "NEC VRC4173 at 0x%#08lx, IRQ is cascaded to %d\n", start, dev->irq);
-
- return 0;
-}
-
-static void vrc4173_remove(struct pci_dev *dev)
-{
- free_irq(dev->irq, NULL);
-
- pci_release_regions(dev);
-}
-
-static struct pci_driver vrc4173_driver = {
- .name = "NEC VRC4173",
- .probe = vrc4173_probe,
- .remove = vrc4173_remove,
- .id_table = vrc4173_id_table,
-};
-
-static int __devinit vrc4173_init(void)
-{
- int err;
-
- err = pci_register_driver(&vrc4173_driver);
- if (err < 0)
- return err;
-
- vrc4173_initialized = 1;
-
- return 0;
-}
-
-static void __devexit vrc4173_exit(void)
-{
- vrc4173_initialized = 0;
-
- pci_unregister_driver(&vrc4173_driver);
-}
-
-module_init(vrc4173_init);
-module_exit(vrc4173_exit);
/*
* setup.c, Setup for the IBM WorkPad z50.
*
- * Copyright (C) 2002-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/ioport.h>
#include <asm/io.h>
-#include <asm/vr41xx/workpad.h>
+
+#define WORKPAD_ISA_IO_BASE 0x15000000
+#define WORKPAD_ISA_IO_SIZE 0x03000000
+#define WORKPAD_ISA_IO_START 0
+#define WORKPAD_ISA_IO_END (WORKPAD_ISA_IO_SIZE - 1)
+#define WORKPAD_IO_PORT_BASE KSEG1ADDR(WORKPAD_ISA_IO_BASE)
static int __init ibm_workpad_setup(void)
{
- set_io_port_base(IO_PORT_BASE);
- ioport_resource.start = IO_PORT_RESOURCE_START;
- ioport_resource.end = IO_PORT_RESOURCE_END;
+ set_io_port_base(WORKPAD_IO_PORT_BASE);
+ ioport_resource.start = WORKPAD_ISA_IO_START;
+ ioport_resource.end = WORKPAD_ISA_IO_END;
return 0;
}
enable_8259A_irq(irq - I8259_IRQ_BASE);
}
-static struct hw_interrupt_type i8259_irq_type = {
+static struct irq_chip i8259_irq_type = {
.typename = "XT-PIC",
.startup = startup_i8259_irq,
.shutdown = shutdown_i8259_irq,
}
#if defined(CONFIG_PDC_CONSOLE)
+#include <linux/vt_kern.h>
+
static struct tty_driver * pdc_console_device (struct console *c, int *index)
{
extern struct tty_driver console_driver;
unsigned long irq_flags, const char * devname,
void *dev_id)
{
- unsigned int irq = irq_create_mapping(NULL, ist, 0);
+ unsigned int irq = irq_create_mapping(NULL, ist);
if (irq == NO_IRQ)
return -EINVAL;
irq_map[i].host = host;
smp_wmb();
- /* Clear some flags */
- get_irq_desc(i)->status
- &= ~(IRQ_NOREQUEST | IRQ_LEVEL);
+ /* Clear norequest flags */
+ get_irq_desc(i)->status &= ~IRQ_NOREQUEST;
/* Legacy flags are left to default at this point,
* one can then use irq_create_mapping() to
* explicitely change them
*/
- ops->map(host, i, i, 0);
+ ops->map(host, i, i);
}
break;
case IRQ_HOST_MAP_LINEAR:
}
unsigned int irq_create_mapping(struct irq_host *host,
- irq_hw_number_t hwirq,
- unsigned int flags)
+ irq_hw_number_t hwirq)
{
unsigned int virq, hint;
- pr_debug("irq: irq_create_mapping(0x%p, 0x%lx, 0x%x)\n",
- host, hwirq, flags);
+ pr_debug("irq: irq_create_mapping(0x%p, 0x%lx)\n", host, hwirq);
/* Look for default host if nececssary */
if (host == NULL)
virq = irq_find_mapping(host, hwirq);
if (virq != IRQ_NONE) {
pr_debug("irq: -> existing mapping on virq %d\n", virq);
- host->ops->map(host, virq, hwirq, flags);
return virq;
}
}
pr_debug("irq: -> obtained virq %d\n", virq);
- /* Clear some flags */
- get_irq_desc(virq)->status &= ~(IRQ_NOREQUEST | IRQ_LEVEL);
+ /* Clear IRQ_NOREQUEST flag */
+ get_irq_desc(virq)->status &= ~IRQ_NOREQUEST;
/* map it */
- if (host->ops->map(host, virq, hwirq, flags)) {
+ smp_wmb();
+ irq_map[virq].hwirq = hwirq;
+ smp_mb();
+ if (host->ops->map(host, virq, hwirq)) {
pr_debug("irq: -> mapping failed, freeing\n");
irq_free_virt(virq, 1);
return NO_IRQ;
}
- smp_wmb();
- irq_map[virq].hwirq = hwirq;
- smp_mb();
return virq;
}
EXPORT_SYMBOL_GPL(irq_create_mapping);
{
struct irq_host *host;
irq_hw_number_t hwirq;
- unsigned int flags = IRQ_TYPE_NONE;
+ unsigned int type = IRQ_TYPE_NONE;
+ unsigned int virq;
if (controller == NULL)
host = irq_default_host;
else
host = irq_find_host(controller);
- if (host == NULL)
+ if (host == NULL) {
+ printk(KERN_WARNING "irq: no irq host found for %s !\n",
+ controller->full_name);
return NO_IRQ;
+ }
/* If host has no translation, then we assume interrupt line */
if (host->ops->xlate == NULL)
hwirq = intspec[0];
else {
if (host->ops->xlate(host, controller, intspec, intsize,
- &hwirq, &flags))
+ &hwirq, &type))
return NO_IRQ;
}
- return irq_create_mapping(host, hwirq, flags);
+ /* Create mapping */
+ virq = irq_create_mapping(host, hwirq);
+ if (virq == NO_IRQ)
+ return virq;
+
+ /* Set type if specified and different than the current one */
+ if (type != IRQ_TYPE_NONE &&
+ type != (get_irq_desc(virq)->status & IRQF_TRIGGER_MASK))
+ set_irq_type(virq, type);
+ return virq;
}
EXPORT_SYMBOL_GPL(irq_create_of_mapping);
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/bootmem.h>
+#include <linux/irq.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/sections.h>
#include <asm/pci-bridge.h>
#include <asm/byteorder.h>
-#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/machdep.h>
DBG("Try to map irq for %s...\n", pci_name(pci_dev));
+ /* Try to get a mapping from the device-tree */
if (of_irq_map_pci(pci_dev, &oirq)) {
- DBG(" -> failed !\n");
- return -1;
- }
+ u8 line, pin;
+
+ /* If that fails, lets fallback to what is in the config
+ * space and map that through the default controller. We
+ * also set the type to level low since that's what PCI
+ * interrupts are. If your platform does differently, then
+ * either provide a proper interrupt tree or don't use this
+ * function.
+ */
+ if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
+ return -1;
+ if (pin == 0)
+ return -1;
+ if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
+ line == 0xff) {
+ return -1;
+ }
+ DBG(" -> no map ! Using irq line %d from PCI config\n", line);
- DBG(" -> got one, spec %d cells (0x%08x...) on %s\n",
- oirq.size, oirq.specifier[0], oirq.controller->full_name);
+ virq = irq_create_mapping(NULL, line);
+ if (virq != NO_IRQ)
+ set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
+ } else {
+ DBG(" -> got one, spec %d cells (0x%08x...) on %s\n",
+ oirq.size, oirq.specifier[0], oirq.controller->full_name);
- virq = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size);
+ virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+ oirq.size);
+ }
if(virq == NO_IRQ) {
DBG(" -> failed to map !\n");
return -1;
#include <linux/mm.h>
#include <linux/list.h>
#include <linux/syscalls.h>
+#include <linux/irq.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm/byteorder.h>
-#include <asm/irq.h>
#include <asm/machdep.h>
#include <asm/ppc-pci.h>
DBG("Try to map irq for %s...\n", pci_name(pci_dev));
+ /* Try to get a mapping from the device-tree */
if (of_irq_map_pci(pci_dev, &oirq)) {
- DBG(" -> failed !\n");
- return -1;
- }
+ u8 line, pin;
+
+ /* If that fails, lets fallback to what is in the config
+ * space and map that through the default controller. We
+ * also set the type to level low since that's what PCI
+ * interrupts are. If your platform does differently, then
+ * either provide a proper interrupt tree or don't use this
+ * function.
+ */
+ if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
+ return -1;
+ if (pin == 0)
+ return -1;
+ if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
+ line == 0xff) {
+ return -1;
+ }
+ DBG(" -> no map ! Using irq line %d from PCI config\n", line);
- DBG(" -> got one, spec %d cells (0x%08x...) on %s\n",
- oirq.size, oirq.specifier[0], oirq.controller->full_name);
+ virq = irq_create_mapping(NULL, line);
+ if (virq != NO_IRQ)
+ set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
+ } else {
+ DBG(" -> got one, spec %d cells (0x%08x...) on %s\n",
+ oirq.size, oirq.specifier[0], oirq.controller->full_name);
- virq = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size);
+ virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+ oirq.size);
+ }
if(virq == NO_IRQ) {
DBG(" -> failed to map !\n");
return -1;
#include <linux/elfcore.h>
#include <linux/string.h>
#include <linux/interrupt.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/vt_kern.h>
#include <linux/nvram.h>
#include <linux/console.h>
intsize = *tmp;
/* Check index */
- if (index * intsize >= intlen)
+ if ((index + 1) * intsize > intlen)
return -EINVAL;
/* Get new specifier and map it */
#include <linux/ioport.h>
#include <linux/console.h>
#include <linux/utsname.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/root_dev.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
if (iic_hosts[node] == NULL)
continue;
virq = irq_create_mapping(iic_hosts[node],
- iic_ipi_to_irq(ipi), 0);
+ iic_ipi_to_irq(ipi));
if (virq == NO_IRQ) {
printk(KERN_ERR
"iic: failed to map IPI %s on node %d\n",
}
static int iic_host_map(struct irq_host *h, unsigned int virq,
- irq_hw_number_t hw, unsigned int flags)
+ irq_hw_number_t hw)
{
if (hw < IIC_IRQ_IPI0)
set_irq_chip_and_handler(virq, &iic_chip, handle_fasteoi_irq);
struct spider_pic *pic = spider_virq_to_pic(virq);
void __iomem *cfg = spider_get_irq_config(pic, irq_map[virq].hwirq);
- /* We use no locking as we should be covered by the descriptor lock
- * for access to invidual source configuration registers
- */
out_be32(cfg, in_be32(cfg) | 0x30000000u);
}
struct spider_pic *pic = spider_virq_to_pic(virq);
void __iomem *cfg = spider_get_irq_config(pic, irq_map[virq].hwirq);
- /* We use no locking as we should be covered by the descriptor lock
- * for access to invidual source configuration registers
- */
out_be32(cfg, in_be32(cfg) & ~0x30000000u);
}
out_be32(pic->regs + TIR_EDC, 0x100 | (src & 0xf));
}
-static struct irq_chip spider_pic = {
- .typename = " SPIDER ",
- .unmask = spider_unmask_irq,
- .mask = spider_mask_irq,
- .ack = spider_ack_irq,
-};
-
-static int spider_host_match(struct irq_host *h, struct device_node *node)
-{
- struct spider_pic *pic = h->host_data;
- return node == pic->of_node;
-}
-
-static int spider_host_map(struct irq_host *h, unsigned int virq,
- irq_hw_number_t hw, unsigned int flags)
+static int spider_set_irq_type(unsigned int virq, unsigned int type)
{
- unsigned int sense = flags & IRQ_TYPE_SENSE_MASK;
- struct spider_pic *pic = h->host_data;
+ unsigned int sense = type & IRQ_TYPE_SENSE_MASK;
+ struct spider_pic *pic = spider_virq_to_pic(virq);
+ unsigned int hw = irq_map[virq].hwirq;
void __iomem *cfg = spider_get_irq_config(pic, hw);
- int level = 0;
+ struct irq_desc *desc = get_irq_desc(virq);
+ u32 old_mask;
u32 ic;
/* Note that only level high is supported for most interrupts */
break;
case IRQ_TYPE_LEVEL_LOW:
ic = 0x0;
- level = 1;
break;
case IRQ_TYPE_LEVEL_HIGH:
case IRQ_TYPE_NONE:
ic = 0x1;
- level = 1;
break;
default:
return -EINVAL;
}
+ /* Update irq_desc */
+ desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+ desc->status |= type & IRQ_TYPE_SENSE_MASK;
+ if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+ desc->status |= IRQ_LEVEL;
+
/* Configure the source. One gross hack that was there before and
* that I've kept around is the priority to the BE which I set to
* be the same as the interrupt source number. I don't know wether
* that's supposed to make any kind of sense however, we'll have to
* decide that, but for now, I'm not changing the behaviour.
*/
- out_be32(cfg, (ic << 24) | (0x7 << 16) | (pic->node_id << 4) | 0xe);
+ old_mask = in_be32(cfg) & 0x30000000u;
+ out_be32(cfg, old_mask | (ic << 24) | (0x7 << 16) |
+ (pic->node_id << 4) | 0xe);
out_be32(cfg + 4, (0x2 << 16) | (hw & 0xff));
- if (level)
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ return 0;
+}
+
+static struct irq_chip spider_pic = {
+ .typename = " SPIDER ",
+ .unmask = spider_unmask_irq,
+ .mask = spider_mask_irq,
+ .ack = spider_ack_irq,
+ .set_type = spider_set_irq_type,
+};
+
+static int spider_host_match(struct irq_host *h, struct device_node *node)
+{
+ struct spider_pic *pic = h->host_data;
+ return node == pic->of_node;
+}
+
+static int spider_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
set_irq_chip_and_handler(virq, &spider_pic, handle_level_irq);
+
+ /* Set default irq type */
+ set_irq_type(virq, IRQ_TYPE_NONE);
+
return 0;
}
if (iic_host == NULL)
return NO_IRQ;
/* Manufacture an IIC interrupt number of class 2 */
- virq = irq_create_mapping(iic_host, 0x20 | unit, 0);
+ virq = irq_create_mapping(iic_host, 0x20 | unit);
if (virq == NO_IRQ)
printk(KERN_ERR "spider_pic: failed to map cascade !");
return virq;
spu->isrc = isrc = tmp[0];
/* Now map interrupts of all 3 classes */
- spu->irqs[0] = irq_create_mapping(host, 0x00 | isrc, 0);
- spu->irqs[1] = irq_create_mapping(host, 0x10 | isrc, 0);
- spu->irqs[2] = irq_create_mapping(host, 0x20 | isrc, 0);
+ spu->irqs[0] = irq_create_mapping(host, 0x00 | isrc);
+ spu->irqs[1] = irq_create_mapping(host, 0x10 | isrc);
+ spu->irqs[2] = irq_create_mapping(host, 0x20 | isrc);
/* Right now, we only fail if class 2 failed */
return spu->irqs[2] == NO_IRQ ? -EINVAL : 0;
realirq = (((((sub_bus << 8) + (bus - 1)) << 3) + (idsel - 1)) << 3)
+ function;
- return irq_create_mapping(NULL, realirq, IRQ_TYPE_NONE);
+ return irq_create_mapping(NULL, realirq);
}
#endif /* CONFIG_PCI */
}
static int iseries_irq_host_map(struct irq_host *h, unsigned int virq,
- irq_hw_number_t hw, unsigned int flags)
+ irq_hw_number_t hw)
{
set_irq_chip_and_handler(virq, &iseries_pic, handle_fasteoi_irq);
#define OLD_BACKLIGHT_MAX 15
+static void pmac_backlight_key_worker(void *data);
+static DECLARE_WORK(pmac_backlight_key_work, pmac_backlight_key_worker, NULL);
+
+/* Although this variable is used in interrupt context, it makes no sense to
+ * protect it. No user is able to produce enough key events per second and
+ * notice the errors that might happen.
+ */
+static int pmac_backlight_key_queued;
+
/* Protect the pmac_backlight variable */
DEFINE_MUTEX(pmac_backlight_mutex);
return level;
}
-static void pmac_backlight_key(int direction)
+static void pmac_backlight_key_worker(void *data)
{
mutex_lock(&pmac_backlight_mutex);
if (pmac_backlight) {
props = pmac_backlight->props;
brightness = props->brightness +
- ((direction?-1:1) * (props->max_brightness / 15));
+ ((pmac_backlight_key_queued?-1:1) *
+ (props->max_brightness / 15));
if (brightness < 0)
brightness = 0;
mutex_unlock(&pmac_backlight_mutex);
}
-void pmac_backlight_key_up()
+void pmac_backlight_key(int direction)
{
- pmac_backlight_key(0);
-}
-
-void pmac_backlight_key_down()
-{
- pmac_backlight_key(1);
+ /* we can receive multiple interrupts here, but the scheduled work
+ * will run only once, with the last value
+ */
+ pmac_backlight_key_queued = direction;
+ schedule_work(&pmac_backlight_key_work);
}
int pmac_backlight_set_legacy_brightness(int brightness)
return result;
}
+
+EXPORT_SYMBOL_GPL(pmac_backlight);
+EXPORT_SYMBOL_GPL(pmac_backlight_mutex);
+EXPORT_SYMBOL_GPL(pmac_has_backlight_type);
#include <linux/string.h>
#include <linux/init.h>
#include <linux/bootmem.h>
+#include <linux/irq.h>
#include <asm/sections.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/grackle.h>
-#ifdef CONFIG_PPC64
-//#include <asm/iommu.h>
#include <asm/ppc-pci.h>
-#endif
#undef DEBUG
static struct pci_controller *u3_agp;
static struct pci_controller *u4_pcie;
static struct pci_controller *u3_ht;
-#define has_second_ohare 0
#else
static int has_second_ohare;
#endif /* CONFIG_PPC64 */
/* Read interrupt from the device-tree */
pci_read_irq_line(dev);
+#ifdef CONFIG_PPC32
/* Fixup interrupt for the modem/ethernet combo controller.
* on machines with a second ohare chip.
* The number in the device tree (27) is bogus (correct for
*/
if (has_second_ohare &&
dev->vendor == PCI_VENDOR_ID_DEC &&
- dev->device == PCI_DEVICE_ID_DEC_TULIP_PLUS)
- dev->irq = irq_create_mapping(NULL, 60, 0);
+ dev->device == PCI_DEVICE_ID_DEC_TULIP_PLUS) {
+ dev->irq = irq_create_mapping(NULL, 60);
+ set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW);
+ }
+#endif /* CONFIG_PPC32 */
}
}
}
static int pmac_pic_host_map(struct irq_host *h, unsigned int virq,
- irq_hw_number_t hw, unsigned int flags)
+ irq_hw_number_t hw)
{
struct irq_desc *desc = get_irq_desc(virq);
int level;
unsigned int *out_flags)
{
+ *out_flags = IRQ_TYPE_NONE;
*out_hwirq = *intspec;
return 0;
}
printk(KERN_INFO "irq: System has %d possible interrupts\n", max_irqs);
#ifdef CONFIG_XMON
- setup_irq(irq_create_mapping(NULL, 20, 0), &xmon_action);
+ setup_irq(irq_create_mapping(NULL, 20), &xmon_action);
#endif
}
#endif /* CONFIG_PPC32 */
flags |= OF_IMAP_OLDWORLD_MAC;
if (get_property(of_chosen, "linux,bootx", NULL) != NULL)
flags |= OF_IMAP_NO_PHANDLE;
- of_irq_map_init(flags);
#endif /* CONFIG_PPC_32 */
+ of_irq_map_init(flags);
+
/* We first try to detect Apple's new Core99 chipset, since mac-io
* is quite different on those machines and contains an IBM MPIC2.
*/
for (i = 0; i < opicplen; i++) {
if (count > 15)
break;
- virqs[count] = irq_create_mapping(NULL, *(opicprop++),
- IRQ_TYPE_NONE);
+ virqs[count] = irq_create_mapping(NULL, *(opicprop++));
if (virqs[count] == NO_IRQ)
printk(KERN_ERR "Unable to allocate interrupt "
"number for %s\n", np->full_name);
}
static int xics_host_map_direct(struct irq_host *h, unsigned int virq,
- irq_hw_number_t hw, unsigned int flags)
+ irq_hw_number_t hw)
{
- unsigned int sense = flags & IRQ_TYPE_SENSE_MASK;
-
- pr_debug("xics: map_direct virq %d, hwirq 0x%lx, flags: 0x%x\n",
- virq, hw, flags);
-
- if (sense && sense != IRQ_TYPE_LEVEL_LOW)
- printk(KERN_WARNING "xics: using unsupported sense 0x%x"
- " for irq %d (h: 0x%lx)\n", flags, virq, hw);
+ pr_debug("xics: map_direct virq %d, hwirq 0x%lx\n", virq, hw);
get_irq_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, &xics_pic_direct, handle_fasteoi_irq);
}
static int xics_host_map_lpar(struct irq_host *h, unsigned int virq,
- irq_hw_number_t hw, unsigned int flags)
+ irq_hw_number_t hw)
{
- unsigned int sense = flags & IRQ_TYPE_SENSE_MASK;
-
- pr_debug("xics: map_lpar virq %d, hwirq 0x%lx, flags: 0x%x\n",
- virq, hw, flags);
-
- if (sense && sense != IRQ_TYPE_LEVEL_LOW)
- printk(KERN_WARNING "xics: using unsupported sense 0x%x"
- " for irq %d (h: 0x%lx)\n", flags, virq, hw);
+ pr_debug("xics: map_direct virq %d, hwirq 0x%lx\n", virq, hw);
get_irq_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, &xics_pic_lpar, handle_fasteoi_irq);
{
unsigned int ipi;
- ipi = irq_create_mapping(xics_host, XICS_IPI, 0);
+ ipi = irq_create_mapping(xics_host, XICS_IPI);
BUG_ON(ipi == NO_IRQ);
/*
xics_set_cpu_priority(cpu, 0);
+ /*
+ * Clear IPI
+ */
+ if (firmware_has_feature(FW_FEATURE_LPAR))
+ lpar_qirr_info(cpu, 0xff);
+ else
+ direct_qirr_info(cpu, 0xff);
+
/*
* we need to EOI the IPI if we got here from kexec down IPI
*
return;
desc = get_irq_desc(ipi);
if (desc->chip && desc->chip->eoi)
- desc->chip->eoi(XICS_IPI);
+ desc->chip->eoi(ipi);
/*
* Some machines need to have at least one cpu in the GIQ,
}
static int i8259_host_map(struct irq_host *h, unsigned int virq,
- irq_hw_number_t hw, unsigned int flags)
+ irq_hw_number_t hw)
{
pr_debug("i8259_host_map(%d, 0x%lx)\n", virq, hw);
if (hw == 2)
get_irq_desc(virq)->status |= IRQ_NOREQUEST;
- /* We use the level stuff only for now, we might want to
+ /* We use the level handler only for now, we might want to
* be more cautious here but that works for now
*/
get_irq_desc(virq)->status |= IRQ_LEVEL;
if (fixup->base == NULL)
return;
- DBG("startup_ht_interrupt(%u, %u) index: %d\n",
+ DBG("startup_ht_interrupt(0x%x, 0x%x) index: %d\n",
source, irqflags, fixup->index);
spin_lock_irqsave(&mpic->fixup_lock, flags);
/* Enable and configure */
if (fixup->base == NULL)
return;
- DBG("shutdown_ht_interrupt(%u, %u)\n", source, irqflags);
+ DBG("shutdown_ht_interrupt(0x%x, 0x%x)\n", source, irqflags);
/* Disable */
spin_lock_irqsave(&mpic->fixup_lock, flags);
}
}
+#else /* CONFIG_MPIC_BROKEN_U3 */
+
+static inline int mpic_is_ht_interrupt(struct mpic *mpic, unsigned int source)
+{
+ return 0;
+}
+
+static void __init mpic_scan_ht_pics(struct mpic *mpic)
+{
+}
+
#endif /* CONFIG_MPIC_BROKEN_U3 */
unsigned int loops = 100000;
struct mpic *mpic = mpic_from_irq(irq);
unsigned int src = mpic_irq_to_hw(irq);
- unsigned long flags;
DBG("%p: %s: enable_irq: %d (src %d)\n", mpic, mpic->name, irq, src);
- spin_lock_irqsave(&mpic_lock, flags);
mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI,
mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) &
~MPIC_VECPRI_MASK);
break;
}
} while(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK);
- spin_unlock_irqrestore(&mpic_lock, flags);
}
static void mpic_mask_irq(unsigned int irq)
unsigned int loops = 100000;
struct mpic *mpic = mpic_from_irq(irq);
unsigned int src = mpic_irq_to_hw(irq);
- unsigned long flags;
DBG("%s: disable_irq: %d (src %d)\n", mpic->name, irq, src);
- spin_lock_irqsave(&mpic_lock, flags);
mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI,
mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) |
MPIC_VECPRI_MASK);
break;
}
} while(!(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK));
- spin_unlock_irqrestore(&mpic_lock, flags);
}
static void mpic_end_irq(unsigned int irq)
mpic_ht_end_irq(mpic, src);
mpic_eoi(mpic);
}
-
-#endif /* CONFIG_MPIC_BROKEN_U3 */
+#endif /* !CONFIG_MPIC_BROKEN_U3 */
#ifdef CONFIG_SMP
mpic_physmask(cpus_addr(tmp)[0]));
}
-static unsigned int mpic_flags_to_vecpri(unsigned int flags, int *level)
+static unsigned int mpic_type_to_vecpri(unsigned int type)
{
- unsigned int vecpri;
-
/* Now convert sense value */
- switch(flags & IRQ_TYPE_SENSE_MASK) {
+ switch(type & IRQ_TYPE_SENSE_MASK) {
case IRQ_TYPE_EDGE_RISING:
- vecpri = MPIC_VECPRI_SENSE_EDGE |
- MPIC_VECPRI_POLARITY_POSITIVE;
- *level = 0;
- break;
+ return MPIC_VECPRI_SENSE_EDGE | MPIC_VECPRI_POLARITY_POSITIVE;
case IRQ_TYPE_EDGE_FALLING:
- vecpri = MPIC_VECPRI_SENSE_EDGE |
- MPIC_VECPRI_POLARITY_NEGATIVE;
- *level = 0;
- break;
+ case IRQ_TYPE_EDGE_BOTH:
+ return MPIC_VECPRI_SENSE_EDGE | MPIC_VECPRI_POLARITY_NEGATIVE;
case IRQ_TYPE_LEVEL_HIGH:
- vecpri = MPIC_VECPRI_SENSE_LEVEL |
- MPIC_VECPRI_POLARITY_POSITIVE;
- *level = 1;
- break;
+ return MPIC_VECPRI_SENSE_LEVEL | MPIC_VECPRI_POLARITY_POSITIVE;
case IRQ_TYPE_LEVEL_LOW:
default:
- vecpri = MPIC_VECPRI_SENSE_LEVEL |
- MPIC_VECPRI_POLARITY_NEGATIVE;
- *level = 1;
+ return MPIC_VECPRI_SENSE_LEVEL | MPIC_VECPRI_POLARITY_NEGATIVE;
}
- return vecpri;
+}
+
+static int mpic_set_irq_type(unsigned int virq, unsigned int flow_type)
+{
+ struct mpic *mpic = mpic_from_irq(virq);
+ unsigned int src = mpic_irq_to_hw(virq);
+ struct irq_desc *desc = get_irq_desc(virq);
+ unsigned int vecpri, vold, vnew;
+
+ DBG("mpic: set_irq_type(mpic:@%p,virq:%d,src:0x%x,type:0x%x)\n",
+ mpic, virq, src, flow_type);
+
+ if (src >= mpic->irq_count)
+ return -EINVAL;
+
+ if (flow_type == IRQ_TYPE_NONE)
+ if (mpic->senses && src < mpic->senses_count)
+ flow_type = mpic->senses[src];
+ if (flow_type == IRQ_TYPE_NONE)
+ flow_type = IRQ_TYPE_LEVEL_LOW;
+
+ desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+ desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
+ if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+ desc->status |= IRQ_LEVEL;
+
+ if (mpic_is_ht_interrupt(mpic, src))
+ vecpri = MPIC_VECPRI_POLARITY_POSITIVE |
+ MPIC_VECPRI_SENSE_EDGE;
+ else
+ vecpri = mpic_type_to_vecpri(flow_type);
+
+ vold = mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI);
+ vnew = vold & ~(MPIC_VECPRI_POLARITY_MASK | MPIC_VECPRI_SENSE_MASK);
+ vnew |= vecpri;
+ if (vold != vnew)
+ mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI, vnew);
+
+ return 0;
}
static struct irq_chip mpic_irq_chip = {
- .mask = mpic_mask_irq,
- .unmask = mpic_unmask_irq,
- .eoi = mpic_end_irq,
+ .mask = mpic_mask_irq,
+ .unmask = mpic_unmask_irq,
+ .eoi = mpic_end_irq,
+ .set_type = mpic_set_irq_type,
};
#ifdef CONFIG_SMP
static struct irq_chip mpic_ipi_chip = {
- .mask = mpic_mask_ipi,
- .unmask = mpic_unmask_ipi,
- .eoi = mpic_end_ipi,
+ .mask = mpic_mask_ipi,
+ .unmask = mpic_unmask_ipi,
+ .eoi = mpic_end_ipi,
};
#endif /* CONFIG_SMP */
.mask = mpic_mask_irq,
.unmask = mpic_unmask_ht_irq,
.eoi = mpic_end_ht_irq,
+ .set_type = mpic_set_irq_type,
};
#endif /* CONFIG_MPIC_BROKEN_U3 */
}
static int mpic_host_map(struct irq_host *h, unsigned int virq,
- irq_hw_number_t hw, unsigned int flags)
+ irq_hw_number_t hw)
{
- struct irq_desc *desc = get_irq_desc(virq);
- struct irq_chip *chip;
struct mpic *mpic = h->host_data;
- u32 v, vecpri = MPIC_VECPRI_SENSE_LEVEL |
- MPIC_VECPRI_POLARITY_NEGATIVE;
- int level;
- unsigned long iflags;
+ struct irq_chip *chip;
- pr_debug("mpic: map virq %d, hwirq 0x%lx, flags: 0x%x\n",
- virq, hw, flags);
+ DBG("mpic: map virq %d, hwirq 0x%lx\n", virq, hw);
if (hw == MPIC_VEC_SPURRIOUS)
return -EINVAL;
+
#ifdef CONFIG_SMP
else if (hw >= MPIC_VEC_IPI_0) {
WARN_ON(!(mpic->flags & MPIC_PRIMARY));
- pr_debug("mpic: mapping as IPI\n");
+ DBG("mpic: mapping as IPI\n");
set_irq_chip_data(virq, mpic);
set_irq_chip_and_handler(virq, &mpic->hc_ipi,
handle_percpu_irq);
if (hw >= mpic->irq_count)
return -EINVAL;
- /* If no sense provided, check default sense array */
- if (((flags & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_NONE) &&
- mpic->senses && hw < mpic->senses_count)
- flags |= mpic->senses[hw];
-
- vecpri = mpic_flags_to_vecpri(flags, &level);
- if (level)
- desc->status |= IRQ_LEVEL;
+ /* Default chip */
chip = &mpic->hc_irq;
#ifdef CONFIG_MPIC_BROKEN_U3
/* Check for HT interrupts, override vecpri */
- if (mpic_is_ht_interrupt(mpic, hw)) {
- vecpri &= ~(MPIC_VECPRI_SENSE_MASK |
- MPIC_VECPRI_POLARITY_MASK);
- vecpri |= MPIC_VECPRI_POLARITY_POSITIVE;
+ if (mpic_is_ht_interrupt(mpic, hw))
chip = &mpic->hc_ht_irq;
- }
-#endif
+#endif /* CONFIG_MPIC_BROKEN_U3 */
- /* Reconfigure irq. We must preserve the mask bit as we can be called
- * while the interrupt is still active (This may change in the future
- * but for now, it is the case).
- */
- spin_lock_irqsave(&mpic_lock, iflags);
- v = mpic_irq_read(hw, MPIC_IRQ_VECTOR_PRI);
- vecpri = (v &
- ~(MPIC_VECPRI_POLARITY_MASK | MPIC_VECPRI_SENSE_MASK)) |
- vecpri;
- if (vecpri != v)
- mpic_irq_write(hw, MPIC_IRQ_VECTOR_PRI, vecpri);
- spin_unlock_irqrestore(&mpic_lock, iflags);
-
- pr_debug("mpic: mapping as IRQ, vecpri = 0x%08x (was 0x%08x)\n",
- vecpri, v);
+ DBG("mpic: mapping to irq chip @%p\n", chip);
set_irq_chip_data(virq, mpic);
set_irq_chip_and_handler(virq, chip, handle_fasteoi_irq);
+
+ /* Set default irq type */
+ set_irq_type(virq, IRQ_TYPE_NONE);
+
return 0;
}
};
*out_hwirq = intspec[0];
- if (intsize > 1 && intspec[1] < 4)
- *out_flags = map_mpic_senses[intspec[1]];
- else
+ if (intsize > 1) {
+ u32 mask = 0x3;
+
+ /* Apple invented a new race of encoding on machines with
+ * an HT APIC. They encode, among others, the index within
+ * the HT APIC. We don't care about it here since thankfully,
+ * it appears that they have the APIC already properly
+ * configured, and thus our current fixup code that reads the
+ * APIC config works fine. However, we still need to mask out
+ * bits in the specifier to make sure we only get bit 0 which
+ * is the level/edge bit (the only sense bit exposed by Apple),
+ * as their bit 1 means something else.
+ */
+ if (machine_is(powermac))
+ mask = 0x1;
+ *out_flags = map_mpic_senses[intspec[1] & mask];
+ } else
*out_flags = IRQ_TYPE_NONE;
+ DBG("mpic: xlate (%d cells: 0x%08x 0x%08x) to line 0x%lx sense 0x%x\n",
+ intsize, intspec[0], intspec[1], *out_hwirq, *out_flags);
+
return 0;
}
if (mpic->irq_count == 0)
mpic->irq_count = mpic->num_sources;
-#ifdef CONFIG_MPIC_BROKEN_U3
/* Do the HT PIC fixups on U3 broken mpic */
DBG("MPIC flags: %x\n", mpic->flags);
if ((mpic->flags & MPIC_BROKEN_U3) && (mpic->flags & MPIC_PRIMARY))
mpic_scan_ht_pics(mpic);
-#endif /* CONFIG_MPIC_BROKEN_U3 */
for (i = 0; i < mpic->num_sources; i++) {
/* start with vector = source number, and masked */
- u32 vecpri = MPIC_VECPRI_MASK | i | (8 << MPIC_VECPRI_PRIORITY_SHIFT);
- int level = 1;
+ u32 vecpri = MPIC_VECPRI_MASK | i |
+ (8 << MPIC_VECPRI_PRIORITY_SHIFT);
- /* do senses munging */
- if (mpic->senses && i < mpic->senses_count)
- vecpri |= mpic_flags_to_vecpri(mpic->senses[i],
- &level);
- else
- vecpri |= MPIC_VECPRI_SENSE_LEVEL;
-
- /* deal with broken U3 */
- if (mpic->flags & MPIC_BROKEN_U3) {
-#ifdef CONFIG_MPIC_BROKEN_U3
- if (mpic_is_ht_interrupt(mpic, i)) {
- vecpri &= ~(MPIC_VECPRI_SENSE_MASK |
- MPIC_VECPRI_POLARITY_MASK);
- vecpri |= MPIC_VECPRI_POLARITY_POSITIVE;
- }
-#else
- printk(KERN_ERR "mpic: BROKEN_U3 set, but CONFIG doesn't match\n");
-#endif
- }
-
- DBG("setup source %d, vecpri: %08x, level: %d\n", i, vecpri,
- (level != 0));
-
/* init hw */
mpic_irq_write(i, MPIC_IRQ_VECTOR_PRI, vecpri);
mpic_irq_write(i, MPIC_IRQ_DESTINATION,
for (i = 0; i < 4; i++) {
unsigned int vipi = irq_create_mapping(mpic->irqhost,
- MPIC_VEC_IPI_0 + i, 0);
+ MPIC_VEC_IPI_0 + i);
if (vipi == NO_IRQ) {
printk(KERN_ERR "Failed to map IPI %d\n", i);
break;
#include <linux/elfcore.h>
#include <linux/string.h>
#include <linux/interrupt.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/vt_kern.h>
#include <linux/nvram.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/initrd.h>
#include <linux/ide.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/slab.h>
#include <linux/user.h>
#include <linux/a.out.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/major.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>
depends on COMPAT && SYSVIPC
default y
-config BINFMT_ELF32
- tristate "Kernel support for 31 bit ELF binaries"
- depends on COMPAT
- help
- This allows you to run 32-bit Linux/ELF binaries on your zSeries
- in 64 bit mode. Everybody wants this; say Y.
-
comment "Code generation options"
choice
*pages = 1;
return diag204_alloc_rbuf();
} else {/* INFO_EXT */
- *pages = diag204(SUBC_RSI | INFO_EXT, 0, 0);
+ *pages = diag204(SUBC_RSI | INFO_EXT, 0, NULL);
if (*pages <= 0)
return ERR_PTR(-ENOSYS);
else
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_COMPAT) += compat_linux.o compat_signal.o \
- compat_wrapper.o compat_exec_domain.o
-obj-$(CONFIG_BINFMT_ELF32) += binfmt_elf32.o
+ compat_wrapper.o compat_exec_domain.o \
+ binfmt_elf32.o
obj-$(CONFIG_VIRT_TIMER) += vtime.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
mm_segment_t old_fs = get_fs ();
set_fs (KERNEL_DS);
- ret = sys_sysinfo(&s);
+ ret = sys_sysinfo((struct sysinfo __user *) &s);
set_fs (old_fs);
err = put_user (s.uptime, &info->uptime);
err |= __put_user (s.loads[0], &info->loads[0]);
mm_segment_t old_fs = get_fs ();
set_fs (KERNEL_DS);
- ret = sys_sched_rr_get_interval(pid, &t);
+ ret = sys_sched_rr_get_interval(pid, (struct timespec __user *) &t);
set_fs (old_fs);
if (put_compat_timespec(&t, interval))
return -EFAULT;
}
}
set_fs (KERNEL_DS);
- ret = sys_rt_sigprocmask(how, set ? &s : NULL, oset ? &s : NULL, sigsetsize);
+ ret = sys_rt_sigprocmask(how,
+ set ? (sigset_t __user *) &s : NULL,
+ oset ? (sigset_t __user *) &s : NULL,
+ sigsetsize);
set_fs (old_fs);
if (ret) return ret;
if (oset) {
mm_segment_t old_fs = get_fs();
set_fs (KERNEL_DS);
- ret = sys_rt_sigpending(&s, sigsetsize);
+ ret = sys_rt_sigpending((sigset_t __user *) &s, sigsetsize);
set_fs (old_fs);
if (!ret) {
switch (_NSIG_WORDS) {
if (copy_siginfo_from_user32(&info, uinfo))
return -EFAULT;
set_fs (KERNEL_DS);
- ret = sys_rt_sigqueueinfo(pid, sig, &info);
+ ret = sys_rt_sigqueueinfo(pid, sig, (siginfo_t __user *) &info);
set_fs (old_fs);
return ret;
}
return -EFAULT;
set_fs(KERNEL_DS);
- ret = sys_sendfile(out_fd, in_fd, offset ? &of : NULL, count);
+ ret = sys_sendfile(out_fd, in_fd,
+ offset ? (off_t __user *) &of : NULL, count);
set_fs(old_fs);
if (offset && put_user(of, offset))
return -EFAULT;
set_fs(KERNEL_DS);
- ret = sys_sendfile64(out_fd, in_fd, offset ? &lof : NULL, count);
+ ret = sys_sendfile64(out_fd, in_fd,
+ offset ? (loff_t __user *) &lof : NULL, count);
set_fs(old_fs);
if (offset && put_user(lof, offset))
.Lbss_end: .long _end
.Lparmaddr: .long PARMAREA
.Lsccbaddr: .long .Lsccb
- .align 4096
+ .org 0x12000
.Lsccb:
.hword 0x1000 # length, one page
.byte 0x00,0x00,0x00
.Lscpincr2:
.quad 0x00
.fill 3984,1,0
- .align 4096
+ .org 0x13000
#ifdef CONFIG_SHARED_KERNEL
.org 0x100000
.Lparmaddr:
.quad PARMAREA
- .align 4096
+ .org 0x12000
.Lsccb:
.hword 0x1000 # length, one page
.byte 0x00,0x00,0x00
.Lscpincr2:
.quad 0x00
.fill 3984,1,0
- .align 4096
+ .org 0x13000
#ifdef CONFIG_SHARED_KERNEL
.org 0x100000
machine_kexec(struct kimage *image)
{
clear_all_subchannels();
+ cio_reset_channel_paths();
/* Disable lowcore protection */
ctl_clear_bit(0,28);
int nrela, i, j;
/* Find symbol table and string table. */
- symtab = 0;
+ symtab = NULL;
for (i = 0; i < hdr->e_shnum; i++)
switch (sechdrs[i].sh_type) {
case SHT_SYMTAB:
show_registers(regs);
/* Show stack backtrace if pt_regs is from kernel mode */
if (!(regs->psw.mask & PSW_MASK_PSTATE))
- show_trace(0,(unsigned long *) regs->gprs[15]);
+ show_trace(NULL, (unsigned long *) regs->gprs[15]);
}
extern void kernel_thread_starter(void);
void init_irq_proc(void)
{
/* create /proc/irq */
- root_irq_dir = proc_mkdir("irq", 0);
+ root_irq_dir = proc_mkdir("irq", NULL);
/* create /proc/irq/prof_cpu_mask */
create_prof_cpu_mask(root_irq_dir);
* (0x1202 external call, 0x1004 cpu timer, 0x2401 hwc console, 0x4000
* iucv and 0x2603 pfault) this is always the first element.
*/
-ext_int_info_t *ext_int_hash[256] = { 0, };
+ext_int_info_t *ext_int_hash[256] = { NULL, };
static inline int ext_hash(__u16 code)
{
static decl_subsys(ipl, NULL, NULL);
+static int ipl_register_fcp_files(void)
+{
+ int rc;
+
+ rc = sysfs_create_group(&ipl_subsys.kset.kobj,
+ &ipl_fcp_attr_group);
+ if (rc)
+ goto out;
+ rc = sysfs_create_bin_file(&ipl_subsys.kset.kobj,
+ &ipl_parameter_attr);
+ if (rc)
+ goto out_ipl_parm;
+ rc = sysfs_create_bin_file(&ipl_subsys.kset.kobj,
+ &ipl_scp_data_attr);
+ if (!rc)
+ goto out;
+
+ sysfs_remove_bin_file(&ipl_subsys.kset.kobj, &ipl_parameter_attr);
+
+out_ipl_parm:
+ sysfs_remove_group(&ipl_subsys.kset.kobj, &ipl_fcp_attr_group);
+out:
+ return rc;
+}
+
static int __init
ipl_device_sysfs_register(void) {
int rc;
rc = firmware_register(&ipl_subsys);
if (rc)
- return rc;
+ goto out;
switch (get_ipl_type()) {
case ipl_type_ccw:
- sysfs_create_group(&ipl_subsys.kset.kobj, &ipl_ccw_attr_group);
+ rc = sysfs_create_group(&ipl_subsys.kset.kobj,
+ &ipl_ccw_attr_group);
break;
case ipl_type_fcp:
- sysfs_create_group(&ipl_subsys.kset.kobj, &ipl_fcp_attr_group);
- sysfs_create_bin_file(&ipl_subsys.kset.kobj,
- &ipl_parameter_attr);
- sysfs_create_bin_file(&ipl_subsys.kset.kobj,
- &ipl_scp_data_attr);
+ rc = ipl_register_fcp_files();
break;
default:
- sysfs_create_group(&ipl_subsys.kset.kobj,
- &ipl_unknown_attr_group);
+ rc = sysfs_create_group(&ipl_subsys.kset.kobj,
+ &ipl_unknown_attr_group);
break;
}
- return 0;
+
+ if (rc)
+ firmware_unregister(&ipl_subsys);
+out:
+ return rc;
}
__initcall(ipl_device_sysfs_register);
-xtime.tv_sec, -xtime.tv_nsec);
/* request the clock comparator external interrupt */
- if (register_early_external_interrupt(0x1004, 0,
+ if (register_early_external_interrupt(0x1004, NULL,
&ext_int_info_cc) != 0)
panic("Couldn't request external interrupt 0x1004");
*/
void dump_stack(void)
{
- show_stack(0, 0);
+ show_stack(NULL, NULL);
}
EXPORT_SYMBOL(dump_stack);
}
}
-static inline void *get_check_address(struct pt_regs *regs)
+static inline void __user *get_check_address(struct pt_regs *regs)
{
- return (void *)((regs->psw.addr-S390_lowcore.pgm_ilc) & PSW_ADDR_INSN);
+ return (void __user *)((regs->psw.addr-S390_lowcore.pgm_ilc) & PSW_ADDR_INSN);
}
void do_single_step(struct pt_regs *regs)
info.si_signo = signr; \
info.si_errno = 0; \
info.si_code = sicode; \
- info.si_addr = (void *)siaddr; \
+ info.si_addr = siaddr; \
do_trap(interruption_code, signr, str, regs, &info); \
}
ILL_ILLOPN, get_check_address(regs))
static inline void
-do_fp_trap(struct pt_regs *regs, void *location,
+do_fp_trap(struct pt_regs *regs, void __user *location,
int fpc, long interruption_code)
{
siginfo_t si;
{
siginfo_t info;
__u8 opcode[6];
- __u16 *location;
+ __u16 __user *location;
int signal = 0;
- location = (__u16 *) get_check_address(regs);
+ location = get_check_address(regs);
/*
* We got all needed information from the lowcore and can
asmlinkage void data_exception(struct pt_regs * regs, long interruption_code)
{
- __u16 *location;
+ __u16 __user *location;
int signal = 0;
- location = (__u16 *) get_check_address(regs);
+ location = get_check_address(regs);
/*
* We got all needed information from the lowcore and can
if (s[len] == (char) c)
return (char *) s + len;
} while (--len > 0);
- return 0;
+ return NULL;
}
EXPORT_SYMBOL(strrchr);
return (char *) s1;
s1++;
}
- return 0;
+ return NULL;
}
EXPORT_SYMBOL(strstr);
static void
cmm_start_thread(void)
{
- kernel_thread(cmm_thread, 0, 0);
+ kernel_thread(cmm_thread, NULL, 0);
}
static void
#endif
si.si_signo = SIGSEGV;
si.si_code = si_code;
- si.si_addr = (void *) address;
+ si.si_addr = (void __user *) address;
force_sig_info(SIGSEGV, &si, current);
}
* This file handles the architecture-dependent parts of initialization
*/
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/initrd.h>
#include <linux/slab.h>
#include <linux/user.h>
#include <linux/a.out.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/in6.h>
#include <linux/interrupt.h>
#include <linux/smp_lock.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <asm/semaphore.h>
#include <asm/processor.h>
};
EXPORT_SYMBOL(of_bus_type);
-static inline u64 of_read_addr(u32 *cell, int size)
+static inline u64 of_read_addr(const u32 *cell, int size)
{
u64 r = 0;
while (size--)
int (*match)(struct device_node *parent);
void (*count_cells)(struct device_node *child,
int *addrc, int *sizec);
- u64 (*map)(u32 *addr, u32 *range, int na, int ns, int pna);
- int (*translate)(u32 *addr, u64 offset, int na);
+ int (*map)(u32 *addr, const u32 *range,
+ int na, int ns, int pna);
unsigned int (*get_flags)(u32 *addr);
};
get_cells(dev, addrc, sizec);
}
-static u64 of_bus_default_map(u32 *addr, u32 *range, int na, int ns, int pna)
+/* Make sure the least significant 64-bits are in-range. Even
+ * for 3 or 4 cell values it is a good enough approximation.
+ */
+static int of_out_of_range(const u32 *addr, const u32 *base,
+ const u32 *size, int na, int ns)
{
- u64 cp, s, da;
+ u64 a = of_read_addr(addr, na);
+ u64 b = of_read_addr(base, na);
+
+ if (a < b)
+ return 1;
- cp = of_read_addr(range, na);
- s = of_read_addr(range + na + pna, ns);
- da = of_read_addr(addr, na);
+ b += of_read_addr(size, ns);
+ if (a >= b)
+ return 1;
- if (da < cp || da >= (cp + s))
- return OF_BAD_ADDR;
- return da - cp;
+ return 0;
}
-static int of_bus_default_translate(u32 *addr, u64 offset, int na)
+static int of_bus_default_map(u32 *addr, const u32 *range,
+ int na, int ns, int pna)
{
- u64 a = of_read_addr(addr, na);
- memset(addr, 0, na * 4);
- a += offset;
- if (na > 1)
- addr[na - 2] = a >> 32;
- addr[na - 1] = a & 0xffffffffu;
+ u32 result[OF_MAX_ADDR_CELLS];
+ int i;
+
+ if (ns > 2) {
+ printk("of_device: Cannot handle size cells (%d) > 2.", ns);
+ return -EINVAL;
+ }
+
+ if (of_out_of_range(addr, range, range + na + pna, na, ns))
+ return -EINVAL;
+
+ /* Start with the parent range base. */
+ memcpy(result, range + na, pna * 4);
+
+ /* Add in the child address offset. */
+ for (i = 0; i < na; i++)
+ result[pna - 1 - i] +=
+ (addr[na - 1 - i] -
+ range[na - 1 - i]);
+
+ memcpy(addr, result, pna * 4);
return 0;
}
return IORESOURCE_MEM;
}
-
/*
* PCI bus specific translator
*/
static int of_bus_pci_match(struct device_node *np)
{
- return !strcmp(np->type, "pci") || !strcmp(np->type, "pciex");
+ if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) {
+ /* Do not do PCI specific frobbing if the
+ * PCI bridge lacks a ranges property. We
+ * want to pass it through up to the next
+ * parent as-is, not with the PCI translate
+ * method which chops off the top address cell.
+ */
+ if (!of_find_property(np, "ranges", NULL))
+ return 0;
+
+ return 1;
+ }
+
+ return 0;
}
static void of_bus_pci_count_cells(struct device_node *np,
*sizec = 2;
}
-static u64 of_bus_pci_map(u32 *addr, u32 *range, int na, int ns, int pna)
+static int of_bus_pci_map(u32 *addr, const u32 *range,
+ int na, int ns, int pna)
{
- u64 cp, s, da;
+ u32 result[OF_MAX_ADDR_CELLS];
+ int i;
/* Check address type match */
if ((addr[0] ^ range[0]) & 0x03000000)
- return OF_BAD_ADDR;
+ return -EINVAL;
- /* Read address values, skipping high cell */
- cp = of_read_addr(range + 1, na - 1);
- s = of_read_addr(range + na + pna, ns);
- da = of_read_addr(addr + 1, na - 1);
+ if (of_out_of_range(addr + 1, range + 1, range + na + pna,
+ na - 1, ns))
+ return -EINVAL;
- if (da < cp || da >= (cp + s))
- return OF_BAD_ADDR;
- return da - cp;
-}
+ /* Start with the parent range base. */
+ memcpy(result, range + na, pna * 4);
-static int of_bus_pci_translate(u32 *addr, u64 offset, int na)
-{
- return of_bus_default_translate(addr + 1, offset, na - 1);
+ /* Add in the child address offset, skipping high cell. */
+ for (i = 0; i < na - 1; i++)
+ result[pna - 1 - i] +=
+ (addr[na - 1 - i] -
+ range[na - 1 - i]);
+
+ memcpy(addr, result, pna * 4);
+
+ return 0;
}
static unsigned int of_bus_pci_get_flags(u32 *addr)
*sizec = 1;
}
-static u64 of_bus_sbus_map(u32 *addr, u32 *range, int na, int ns, int pna)
+static int of_bus_sbus_map(u32 *addr, const u32 *range, int na, int ns, int pna)
{
return of_bus_default_map(addr, range, na, ns, pna);
}
-static int of_bus_sbus_translate(u32 *addr, u64 offset, int na)
-{
- return of_bus_default_translate(addr, offset, na);
-}
-
static unsigned int of_bus_sbus_get_flags(u32 *addr)
{
return IORESOURCE_MEM;
.match = of_bus_pci_match,
.count_cells = of_bus_pci_count_cells,
.map = of_bus_pci_map,
- .translate = of_bus_pci_translate,
.get_flags = of_bus_pci_get_flags,
},
/* SBUS */
.match = of_bus_sbus_match,
.count_cells = of_bus_sbus_count_cells,
.map = of_bus_sbus_map,
- .translate = of_bus_sbus_translate,
.get_flags = of_bus_sbus_get_flags,
},
/* Default */
.match = NULL,
.count_cells = of_bus_default_count_cells,
.map = of_bus_default_map,
- .translate = of_bus_default_translate,
.get_flags = of_bus_default_get_flags,
},
};
u32 *ranges;
unsigned int rlen;
int rone;
- u64 offset = OF_BAD_ADDR;
ranges = of_get_property(parent, "ranges", &rlen);
if (ranges == NULL || rlen == 0) {
- offset = of_read_addr(addr, na);
- memset(addr, 0, pna * 4);
- goto finish;
+ u32 result[OF_MAX_ADDR_CELLS];
+ int i;
+
+ memset(result, 0, pna * 4);
+ for (i = 0; i < na; i++)
+ result[pna - 1 - i] =
+ addr[na - 1 - i];
+
+ memcpy(addr, result, pna * 4);
+ return 0;
}
/* Now walk through the ranges */
rlen /= 4;
rone = na + pna + ns;
for (; rlen >= rone; rlen -= rone, ranges += rone) {
- offset = bus->map(addr, ranges, na, ns, pna);
- if (offset != OF_BAD_ADDR)
- break;
+ if (!bus->map(addr, ranges, na, ns, pna))
+ return 0;
}
- if (offset == OF_BAD_ADDR)
- return 1;
- memcpy(addr, ranges + na, 4 * pna);
-
-finish:
- /* Translate it into parent bus space */
- return pbus->translate(addr, offset, pna);
+ return 1;
}
+static int of_resource_verbose;
+
static void __init build_device_resources(struct of_device *op,
struct device *parent)
{
pbus = of_match_bus(pp);
pbus->count_cells(dp, &pna, &pns);
- if (build_one_resource(dp, bus, pbus, addr, dna, dns, pna))
+ if (build_one_resource(dp, bus, pbus, addr,
+ dna, dns, pna))
break;
dna = pna;
build_res:
memset(r, 0, sizeof(*r));
+
+ if (of_resource_verbose)
+ printk("%s reg[%d] -> %llx\n",
+ op->node->full_name, index,
+ result);
+
if (result != OF_BAD_ADDR) {
r->start = result & 0xffffffff;
r->end = result + size - 1;
postcore_initcall(of_bus_driver_init);
+static int __init of_debug(char *str)
+{
+ int val = 0;
+
+ get_option(&str, &val);
+ if (val & 1)
+ of_resource_verbose = 1;
+ return 1;
+}
+
+__setup("of_debug=", of_debug);
+
int of_register_driver(struct of_platform_driver *drv, struct bus_type *bus)
{
/* initialize common driver fields */
if (rc)
return rc;
- device_create_file(&ofdev->dev, &dev_attr_devspec);
+ rc = device_create_file(&ofdev->dev, &dev_attr_devspec);
+ if (rc)
+ device_unregister(&ofdev->dev);
- return 0;
+ return rc;
}
void of_device_unregister(struct of_device *ofdev)
#include <asm/smp.h>
#include <linux/user.h>
#include <linux/a.out.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/delay.h>
#include <linux/fs.h>
#include <linux/seq_file.h>
default y
config BINFMT_ELF32
- tristate "Kernel support for 32-bit ELF binaries"
+ bool "Kernel support for 32-bit ELF binaries"
depends on SPARC32_COMPAT
help
This allows you to run 32-bit Linux/ELF binaries on your Ultra.
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17
-# Fri Jun 23 23:17:09 2006
+# Linux kernel version: 2.6.18-rc1
+# Wed Jul 12 14:00:58 2006
#
CONFIG_SPARC=y
CONFIG_SPARC64=y
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_MEMORY_HOTPLUG=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_SBUS=y
CONFIG_SBUSCHAR=y
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
-CONFIG_TCP_CONG_COMPOUND=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
+CONFIG_MD_RAID456=m
# CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_FIRMWARE_EDID is not set
+# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHEDSTATS=y
# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
save %sp, -192, %sp
/* Force interrupts to be disabled. */
- rdpr %pstate, %o1
- andn %o1, PSTATE_IE, %o1
+ rdpr %pstate, %l0
+ andn %l0, PSTATE_IE, %o1
wrpr %o1, 0x0, %pstate
+ rdpr %pil, %l1
wrpr %g0, 15, %pil
/* Make the firmware call to jump over to the Linux trap table. */
call init_irqwork_curcpu
nop
- /* Now we can turn interrupts back on. */
- rdpr %pstate, %o1
- or %o1, PSTATE_IE, %o1
- wrpr %o1, 0, %pstate
- wrpr %g0, 0x0, %pil
+ /* Now we can restore interrupt state. */
+ wrpr %l0, 0, %pstate
+ wrpr %l1, 0x0, %pil
ret
restore
};
EXPORT_SYMBOL(of_bus_type);
-static inline u64 of_read_addr(u32 *cell, int size)
+static inline u64 of_read_addr(const u32 *cell, int size)
{
u64 r = 0;
while (size--)
int (*match)(struct device_node *parent);
void (*count_cells)(struct device_node *child,
int *addrc, int *sizec);
- u64 (*map)(u32 *addr, u32 *range, int na, int ns, int pna);
- int (*translate)(u32 *addr, u64 offset, int na);
+ int (*map)(u32 *addr, const u32 *range,
+ int na, int ns, int pna);
unsigned int (*get_flags)(u32 *addr);
};
get_cells(dev, addrc, sizec);
}
-static u64 of_bus_default_map(u32 *addr, u32 *range, int na, int ns, int pna)
+/* Make sure the least significant 64-bits are in-range. Even
+ * for 3 or 4 cell values it is a good enough approximation.
+ */
+static int of_out_of_range(const u32 *addr, const u32 *base,
+ const u32 *size, int na, int ns)
{
- u64 cp, s, da;
+ u64 a = of_read_addr(addr, na);
+ u64 b = of_read_addr(base, na);
- cp = of_read_addr(range, na);
- s = of_read_addr(range + na + pna, ns);
- da = of_read_addr(addr, na);
+ if (a < b)
+ return 1;
- if (da < cp || da >= (cp + s))
- return OF_BAD_ADDR;
- return da - cp;
+ b += of_read_addr(size, ns);
+ if (a >= b)
+ return 1;
+
+ return 0;
}
-static int of_bus_default_translate(u32 *addr, u64 offset, int na)
+static int of_bus_default_map(u32 *addr, const u32 *range,
+ int na, int ns, int pna)
{
- u64 a = of_read_addr(addr, na);
- memset(addr, 0, na * 4);
- a += offset;
- if (na > 1)
- addr[na - 2] = a >> 32;
- addr[na - 1] = a & 0xffffffffu;
+ u32 result[OF_MAX_ADDR_CELLS];
+ int i;
+
+ if (ns > 2) {
+ printk("of_device: Cannot handle size cells (%d) > 2.", ns);
+ return -EINVAL;
+ }
+
+ if (of_out_of_range(addr, range, range + na + pna, na, ns))
+ return -EINVAL;
+
+ /* Start with the parent range base. */
+ memcpy(result, range + na, pna * 4);
+
+ /* Add in the child address offset. */
+ for (i = 0; i < na; i++)
+ result[pna - 1 - i] +=
+ (addr[na - 1 - i] -
+ range[na - 1 - i]);
+
+ memcpy(addr, result, pna * 4);
return 0;
}
static int of_bus_pci_match(struct device_node *np)
{
- return !strcmp(np->type, "pci") || !strcmp(np->type, "pciex");
+ if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) {
+ /* Do not do PCI specific frobbing if the
+ * PCI bridge lacks a ranges property. We
+ * want to pass it through up to the next
+ * parent as-is, not with the PCI translate
+ * method which chops off the top address cell.
+ */
+ if (!of_find_property(np, "ranges", NULL))
+ return 0;
+
+ return 1;
+ }
+
+ return 0;
}
static void of_bus_pci_count_cells(struct device_node *np,
*sizec = 2;
}
-static u64 of_bus_pci_map(u32 *addr, u32 *range, int na, int ns, int pna)
+static int of_bus_pci_map(u32 *addr, const u32 *range,
+ int na, int ns, int pna)
{
- u64 cp, s, da;
+ u32 result[OF_MAX_ADDR_CELLS];
+ int i;
/* Check address type match */
if ((addr[0] ^ range[0]) & 0x03000000)
- return OF_BAD_ADDR;
+ return -EINVAL;
- /* Read address values, skipping high cell */
- cp = of_read_addr(range + 1, na - 1);
- s = of_read_addr(range + na + pna, ns);
- da = of_read_addr(addr + 1, na - 1);
+ if (of_out_of_range(addr + 1, range + 1, range + na + pna,
+ na - 1, ns))
+ return -EINVAL;
- if (da < cp || da >= (cp + s))
- return OF_BAD_ADDR;
- return da - cp;
-}
+ /* Start with the parent range base. */
+ memcpy(result, range + na, pna * 4);
-static int of_bus_pci_translate(u32 *addr, u64 offset, int na)
-{
- return of_bus_default_translate(addr + 1, offset, na - 1);
+ /* Add in the child address offset, skipping high cell. */
+ for (i = 0; i < na - 1; i++)
+ result[pna - 1 - i] +=
+ (addr[na - 1 - i] -
+ range[na - 1 - i]);
+
+ memcpy(addr, result, pna * 4);
+
+ return 0;
}
static unsigned int of_bus_pci_get_flags(u32 *addr)
return flags;
}
-/*
- * ISA bus specific translator
- */
-
-static int of_bus_isa_match(struct device_node *np)
-{
- return !strcmp(np->name, "isa");
-}
-
-static void of_bus_isa_count_cells(struct device_node *child,
- int *addrc, int *sizec)
-{
- if (addrc)
- *addrc = 2;
- if (sizec)
- *sizec = 1;
-}
-
-static u64 of_bus_isa_map(u32 *addr, u32 *range, int na, int ns, int pna)
-{
- u64 cp, s, da;
-
- /* Check address type match */
- if ((addr[0] ^ range[0]) & 0x00000001)
- return OF_BAD_ADDR;
-
- /* Read address values, skipping high cell */
- cp = of_read_addr(range + 1, na - 1);
- s = of_read_addr(range + na + pna, ns);
- da = of_read_addr(addr + 1, na - 1);
-
- if (da < cp || da >= (cp + s))
- return OF_BAD_ADDR;
- return da - cp;
-}
-
-static int of_bus_isa_translate(u32 *addr, u64 offset, int na)
-{
- return of_bus_default_translate(addr + 1, offset, na - 1);
-}
-
-static unsigned int of_bus_isa_get_flags(u32 *addr)
-{
- unsigned int flags = 0;
- u32 w = addr[0];
-
- if (w & 1)
- flags |= IORESOURCE_IO;
- else
- flags |= IORESOURCE_MEM;
- return flags;
-}
-
/*
* SBUS bus specific translator
*/
*sizec = 1;
}
-static u64 of_bus_sbus_map(u32 *addr, u32 *range, int na, int ns, int pna)
+static int of_bus_sbus_map(u32 *addr, const u32 *range, int na, int ns, int pna)
{
return of_bus_default_map(addr, range, na, ns, pna);
}
-static int of_bus_sbus_translate(u32 *addr, u64 offset, int na)
-{
- return of_bus_default_translate(addr, offset, na);
-}
-
static unsigned int of_bus_sbus_get_flags(u32 *addr)
{
return IORESOURCE_MEM;
.match = of_bus_pci_match,
.count_cells = of_bus_pci_count_cells,
.map = of_bus_pci_map,
- .translate = of_bus_pci_translate,
.get_flags = of_bus_pci_get_flags,
},
- /* ISA */
- {
- .name = "isa",
- .addr_prop_name = "reg",
- .match = of_bus_isa_match,
- .count_cells = of_bus_isa_count_cells,
- .map = of_bus_isa_map,
- .translate = of_bus_isa_translate,
- .get_flags = of_bus_isa_get_flags,
- },
/* SBUS */
{
.name = "sbus",
.match = of_bus_sbus_match,
.count_cells = of_bus_sbus_count_cells,
.map = of_bus_sbus_map,
- .translate = of_bus_sbus_translate,
.get_flags = of_bus_sbus_get_flags,
},
/* Default */
.match = NULL,
.count_cells = of_bus_default_count_cells,
.map = of_bus_default_map,
- .translate = of_bus_default_translate,
.get_flags = of_bus_default_get_flags,
},
};
u32 *ranges;
unsigned int rlen;
int rone;
- u64 offset = OF_BAD_ADDR;
ranges = of_get_property(parent, "ranges", &rlen);
if (ranges == NULL || rlen == 0) {
- offset = of_read_addr(addr, na);
- memset(addr, 0, pna * 4);
- goto finish;
+ u32 result[OF_MAX_ADDR_CELLS];
+ int i;
+
+ memset(result, 0, pna * 4);
+ for (i = 0; i < na; i++)
+ result[pna - 1 - i] =
+ addr[na - 1 - i];
+
+ memcpy(addr, result, pna * 4);
+ return 0;
}
/* Now walk through the ranges */
rlen /= 4;
rone = na + pna + ns;
for (; rlen >= rone; rlen -= rone, ranges += rone) {
- offset = bus->map(addr, ranges, na, ns, pna);
- if (offset != OF_BAD_ADDR)
- break;
+ if (!bus->map(addr, ranges, na, ns, pna))
+ return 0;
}
- if (offset == OF_BAD_ADDR)
+
+ return 1;
+}
+
+static int __init use_1to1_mapping(struct device_node *pp)
+{
+ char *model;
+
+ /* If this is on the PMU bus, don't try to translate it even
+ * if a ranges property exists.
+ */
+ if (!strcmp(pp->name, "pmu"))
return 1;
- memcpy(addr, ranges + na, 4 * pna);
+ /* If we have a ranges property in the parent, use it. */
+ if (of_find_property(pp, "ranges", NULL) != NULL)
+ return 0;
+
+ /* If the parent is the dma node of an ISA bus, pass
+ * the translation up to the root.
+ */
+ if (!strcmp(pp->name, "dma"))
+ return 0;
+
+ /* Similarly for Simba PCI bridges. */
+ model = of_get_property(pp, "model", NULL);
+ if (model && !strcmp(model, "SUNW,simba"))
+ return 0;
-finish:
- /* Translate it into parent bus space */
- return pbus->translate(addr, offset, pna);
+ return 1;
}
+static int of_resource_verbose;
+
static void __init build_device_resources(struct of_device *op,
struct device *parent)
{
memcpy(addr, reg, na * 4);
- /* If the immediate parent has no ranges property to apply,
- * just use a 1<->1 mapping. Unless it is the 'dma' child
- * of an isa bus, which must be passed up towards the root.
- *
- * Also, don't try to translate PMU bus device registers.
- */
- if ((of_find_property(pp, "ranges", NULL) == NULL &&
- strcmp(pp->name, "dma") != 0) ||
- !strcmp(pp->name, "pmu")) {
+ if (use_1to1_mapping(pp)) {
result = of_read_addr(addr, na);
goto build_res;
}
pbus = of_match_bus(pp);
pbus->count_cells(dp, &pna, &pns);
- if (build_one_resource(dp, bus, pbus, addr, dna, dns, pna))
+ if (build_one_resource(dp, bus, pbus, addr,
+ dna, dns, pna))
break;
dna = pna;
build_res:
memset(r, 0, sizeof(*r));
+
+ if (of_resource_verbose)
+ printk("%s reg[%d] -> %lx\n",
+ op->node->full_name, index,
+ result);
+
if (result != OF_BAD_ADDR) {
if (tlb_type == hypervisor)
result &= 0x0fffffffffffffffUL;
return ret;
}
+static int of_irq_verbose;
+
static unsigned int __init build_one_device_irq(struct of_device *op,
struct device *parent,
unsigned int irq)
if (dp->irq_trans) {
irq = dp->irq_trans->irq_build(dp, irq,
dp->irq_trans->data);
-#if 1
- printk("%s: direct translate %x --> %x\n",
- dp->full_name, orig_irq, irq);
-#endif
+
+ if (of_irq_verbose)
+ printk("%s: direct translate %x --> %x\n",
+ dp->full_name, orig_irq, irq);
+
return irq;
}
iret = apply_interrupt_map(dp, pp,
imap, imlen, imsk,
&irq);
-#if 1
- printk("%s: Apply [%s:%x] imap --> [%s:%x]\n",
- op->node->full_name,
- pp->full_name, this_orig_irq,
- (iret ? iret->full_name : "NULL"), irq);
-#endif
+
+ if (of_irq_verbose)
+ printk("%s: Apply [%s:%x] imap --> [%s:%x]\n",
+ op->node->full_name,
+ pp->full_name, this_orig_irq,
+ (iret ? iret->full_name : "NULL"), irq);
+
if (!iret)
break;
unsigned int this_orig_irq = irq;
irq = pci_irq_swizzle(dp, pp, irq);
-#if 1
- printk("%s: PCI swizzle [%s] %x --> %x\n",
- op->node->full_name,
- pp->full_name, this_orig_irq, irq);
-#endif
+ if (of_irq_verbose)
+ printk("%s: PCI swizzle [%s] "
+ "%x --> %x\n",
+ op->node->full_name,
+ pp->full_name, this_orig_irq,
+ irq);
+
}
if (pp->irq_trans) {
irq = ip->irq_trans->irq_build(op->node, irq,
ip->irq_trans->data);
-#if 1
- printk("%s: Apply IRQ trans [%s] %x --> %x\n",
- op->node->full_name, ip->full_name, orig_irq, irq);
-#endif
+ if (of_irq_verbose)
+ printk("%s: Apply IRQ trans [%s] %x --> %x\n",
+ op->node->full_name, ip->full_name, orig_irq, irq);
return irq;
}
postcore_initcall(of_bus_driver_init);
+static int __init of_debug(char *str)
+{
+ int val = 0;
+
+ get_option(&str, &val);
+ if (val & 1)
+ of_resource_verbose = 1;
+ if (val & 2)
+ of_irq_verbose = 1;
+ return 1;
+}
+
+__setup("of_debug=", of_debug);
+
int of_register_driver(struct of_platform_driver *drv, struct bus_type *bus)
{
/* initialize common driver fields */
if (rc)
return rc;
- device_create_file(&ofdev->dev, &dev_attr_devspec);
+ rc = device_create_file(&ofdev->dev, &dev_attr_devspec);
+ if (rc)
+ device_unregister(&ofdev->dev);
- return 0;
+ return rc;
}
void of_device_unregister(struct of_device *ofdev)
{
char *name = pbm->name;
- sprintf(name, "PSYCHO%d PBM%c",
- p->index,
- (pbm == &p->pbm_A ? 'A' : 'B'));
pbm->io_space.name = pbm->mem_space.name = name;
request_resource(&ioport_resource, &pbm->io_space);
pbm->io_space.flags = IORESOURCE_IO;
pbm->mem_space.end = pbm->mem_space.start + PSYCHO_MEMSPACE_SIZE;
pbm->mem_space.flags = IORESOURCE_MEM;
- pbm_register_toplevel_resources(p, pbm);
pbm->parent = p;
pbm->prom_node = dp;
pbm->name = dp->full_name;
+ pbm_register_toplevel_resources(p, pbm);
+
printk("%s: PSYCHO PCI Bus Module ver[%x:%x]\n",
pbm->name,
pbm->chip_version, pbm->chip_revision);
((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) : \
(SABRE_ICLR_A_SLOT0 + (((ino) & 0x1f)<<3)))
+static int sabre_device_needs_wsync(struct device_node *dp)
+{
+ struct device_node *parent = dp->parent;
+ char *parent_model, *parent_compat;
+
+ /* This traversal up towards the root is meant to
+ * handle two cases:
+ *
+ * 1) non-PCI bus sitting under PCI, such as 'ebus'
+ * 2) the PCI controller interrupts themselves, which
+ * will use the sabre_irq_build but do not need
+ * the DMA synchronization handling
+ */
+ while (parent) {
+ if (!strcmp(parent->type, "pci"))
+ break;
+ parent = parent->parent;
+ }
+
+ if (!parent)
+ return 0;
+
+ parent_model = of_get_property(parent,
+ "model", NULL);
+ if (parent_model &&
+ (!strcmp(parent_model, "SUNW,sabre") ||
+ !strcmp(parent_model, "SUNW,simba")))
+ return 0;
+
+ parent_compat = of_get_property(parent,
+ "compatible", NULL);
+ if (parent_compat &&
+ (!strcmp(parent_compat, "pci108e,a000") ||
+ !strcmp(parent_compat, "pci108e,a001")))
+ return 0;
+
+ return 1;
+}
+
static unsigned int sabre_irq_build(struct device_node *dp,
unsigned int ino,
void *_data)
virt_irq = build_irq(inofixup, iclr, imap);
+ /* If the parent device is a PCI<->PCI bridge other than
+ * APB, we have to install a pre-handler to ensure that
+ * all pending DMA is drained before the interrupt handler
+ * is run.
+ */
regs = of_get_property(dp, "reg", NULL);
- if (regs &&
- ((regs->phys_hi >> 16) & 0xff) != irq_data->pci_first_busno) {
+ if (regs && sabre_device_needs_wsync(dp)) {
irq_install_pre_handler(virt_irq,
sabre_wsync_handler,
(void *) (long) regs->phys_hi,
- (void *)
- controller_regs +
- SABRE_WRSYNC);
+ (void *) irq_data);
}
return virt_irq;
#include <asm/smp.h>
#include <linux/user.h>
#include <linux/a.out.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/delay.h>
#include <linux/fs.h>
#include <linux/seq_file.h>
__asm__ __volatile__("wrpr %0, 0x0, %%pstate"
: /* no outputs */
: "r" (pstate));
-
- local_irq_enable();
}
struct freq_table {
If you're involved in UML kernel development and want to use gcov,
say Y. If you're unsure, say N.
-config SYSCALL_DEBUG
- bool "Enable system call debugging"
- depends on DEBUG_INFO
- help
- This adds some system debugging to UML, including keeping a ring buffer
- with recent system calls and some global and per-task statistics.
-
- If unsure, say N
-
endmenu
CHECKFLAGS += -m64
AFLAGS += -m64
LDFLAGS += -m elf_x86_64
+CPPFLAGS += -m64
ELF_ARCH := i386:x86-64
ELF_FORMAT := elf64-x86-64
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_GPROF is not set
# CONFIG_GCOV is not set
-# CONFIG_SYSCALL_DEBUG is not set
#include "umid.h"
static struct mconsole_command commands[] = {
- { "version", mconsole_version, MCONSOLE_INTR },
+ /* With uts namespaces, uts information becomes process-specific, so
+ * we need a process context. If we try handling this in interrupt
+ * context, we may hit an exiting process without a valid uts
+ * namespace.
+ */
+ { "version", mconsole_version, MCONSOLE_PROC },
{ "halt", mconsole_halt, MCONSOLE_PROC },
{ "reboot", mconsole_reboot, MCONSOLE_PROC },
{ "config", mconsole_config, MCONSOLE_PROC },
{
int tap_addr[4];
- if(gate_addr == NULL) return(0);
+ if(gate_addr == NULL)
+ return 0;
if(sscanf(gate_addr, "%d.%d.%d.%d", &tap_addr[0],
&tap_addr[1], &tap_addr[2], &tap_addr[3]) != 4){
printk("Invalid tap IP address - '%s'\n", gate_addr);
- return(-EINVAL);
+ return -EINVAL;
}
- return(0);
+ return 0;
}
void tap_check_ips(char *gate_addr, unsigned char *eth_addr)
n = os_read_file(fd, buf, len);
if(n == -EAGAIN)
- return(0);
+ return 0;
else if(n == 0)
- return(-ENOTCONN);
- return(n);
+ return -ENOTCONN;
+ return n;
}
int net_recvfrom(int fd, void *buf, int len)
{
int n;
- while(((n = recvfrom(fd, buf, len, 0, NULL, NULL)) < 0) &&
- (errno == EINTR)) ;
-
+ CATCH_EINTR(n = recvfrom(fd, buf, len, 0, NULL, NULL));
if(n < 0){
- if(errno == EAGAIN) return(0);
- return(-errno);
+ if(errno == EAGAIN)
+ return 0;
+ return -errno;
}
- else if(n == 0) return(-ENOTCONN);
- return(n);
+ else if(n == 0)
+ return -ENOTCONN;
+ return n;
}
int net_write(int fd, void *buf, int len)
n = os_write_file(fd, buf, len);
if(n == -EAGAIN)
- return(0);
+ return 0;
else if(n == 0)
- return(-ENOTCONN);
- return(n);
+ return -ENOTCONN;
+ return n;
}
int net_send(int fd, void *buf, int len)
{
int n;
- while(((n = send(fd, buf, len, 0)) < 0) && (errno == EINTR)) ;
+ CATCH_EINTR(n = send(fd, buf, len, 0));
if(n < 0){
- if(errno == EAGAIN) return(0);
- return(-errno);
+ if(errno == EAGAIN)
+ return 0;
+ return -errno;
}
- else if(n == 0) return(-ENOTCONN);
- return(n);
+ else if(n == 0)
+ return -ENOTCONN;
+ return n;
}
int net_sendto(int fd, void *buf, int len, void *to, int sock_len)
{
int n;
- while(((n = sendto(fd, buf, len, 0, (struct sockaddr *) to,
- sock_len)) < 0) && (errno == EINTR)) ;
+ CATCH_EINTR(n = sendto(fd, buf, len, 0, (struct sockaddr *) to,
+ sock_len));
if(n < 0){
- if(errno == EAGAIN) return(0);
- return(-errno);
+ if(errno == EAGAIN)
+ return 0;
+ return -errno;
}
- else if(n == 0) return(-ENOTCONN);
- return(n);
+ else if(n == 0)
+ return -ENOTCONN;
+ return n;
}
struct change_pre_exec_data {
err = os_pipe(fds, 1, 0);
if(err < 0){
printk("change_tramp - pipe failed, err = %d\n", -err);
- return(err);
+ return err;
}
pe_data.close_me = fds[0];
pe_data.stdout = fds[1];
if (pid > 0)
CATCH_EINTR(err = waitpid(pid, NULL, 0));
- return(pid);
+ return pid;
}
static void change(char *dev, char *what, unsigned char *addr,
va_start(ap, str);
while((arg = va_arg(ap, char **)) != NULL){
if(*str == '\0')
- return(NULL);
+ return NULL;
end = strchr(str, ',');
if(end != str)
*arg = str;
if(end == NULL)
- return(NULL);
+ return NULL;
*end++ = '\0';
str = end;
}
va_end(ap);
- return(str);
+ return str;
}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
-/*
+/*
* Copyright (C) 2001 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
if(*str != ':'){
printk("tty_init : channel type 'tty' must specify "
"a device\n");
- return(NULL);
+ return NULL;
}
str++;
data = um_kmalloc(sizeof(*data));
if(data == NULL)
- return(NULL);
+ return NULL;
*data = ((struct tty_chan) { .dev = str,
.raw = opts->raw });
-
- return(data);
+
+ return data;
}
static int tty_open(int input, int output, int primary, void *d,
int fd, err;
fd = os_open_file(data->dev, of_set_rw(OPENFLAGS(), input, output), 0);
- if(fd < 0) return(fd);
+ if(fd < 0)
+ return fd;
+
if(data->raw){
CATCH_EINTR(err = tcgetattr(fd, &data->tt));
if(err)
- return(err);
+ return err;
err = raw(fd);
if(err)
- return(err);
+ return err;
}
*dev_out = data->dev;
- return(fd);
+ return fd;
}
struct chan_ops tty_ops = {
.free = generic_free,
.winch = 0,
};
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
{
struct gendisk *disk;
- int err;
disk = alloc_disk(1 << UBD_SHIFT);
if(disk == NULL)
#ifndef __IRQ_USER_H__
#define __IRQ_USER_H__
+#include "uml-config.h"
+
struct irq_fd {
struct irq_fd *next;
void *id;
extern void reactivate_fd(int fd, int irqnum);
extern void deactivate_fd(int fd, int irqnum);
extern int deactivate_all_fds(void);
-extern void forward_interrupts(int pid);
extern int activate_ipi(int fd, int pid);
-extern unsigned long irq_lock(void);
-extern void irq_unlock(unsigned long flags);
+
+#ifdef CONFIG_MODE_TT
+extern void forward_interrupts(int pid);
+#endif
#endif
extern void *syscall_sp(void *t);
extern void syscall_trace(union uml_pt_regs *regs, int entryexit);
extern int hz(void);
-extern void uml_idle_timer(void);
extern unsigned int do_IRQ(int irq, union uml_pt_regs *regs);
extern int external_pid(void *t);
-extern void boot_timer_handler(int sig);
extern void interrupt_end(void);
extern void initial_thread_cb(void (*proc)(void *), void *arg);
extern int debugger_signal(int status, int pid);
longjmp(*buf, val); \
} while(0)
-#define UML_SETJMP(buf, enable) ({ \
- int n; \
+#define UML_SETJMP(buf) ({ \
+ int n, enable; \
enable = get_signals(); \
n = setjmp(*buf); \
if(n != 0) \
-/*
+/*
* Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
#include "irq_user.h"
#include "sysdep/tls.h"
-#define OS_TYPE_FILE 1
-#define OS_TYPE_DIR 2
-#define OS_TYPE_SYMLINK 3
+#define OS_TYPE_FILE 1
+#define OS_TYPE_DIR 2
+#define OS_TYPE_SYMLINK 3
#define OS_TYPE_CHARDEV 4
#define OS_TYPE_BLOCKDEV 5
#define OS_TYPE_FIFO 6
};
#define OPENFLAGS() ((struct openflags) { .r = 0, .w = 0, .s = 0, .c = 0, \
- .t = 0, .a = 0, .e = 0, .cl = 0 })
+ .t = 0, .a = 0, .e = 0, .cl = 0 })
static inline struct openflags of_read(struct openflags flags)
{
- flags.r = 1;
- return(flags);
+ flags.r = 1;
+ return flags;
}
static inline struct openflags of_write(struct openflags flags)
{
- flags.w = 1;
- return(flags);
+ flags.w = 1;
+ return flags;
}
static inline struct openflags of_rdwr(struct openflags flags)
{
- return(of_read(of_write(flags)));
+ return of_read(of_write(flags));
}
static inline struct openflags of_set_rw(struct openflags flags, int r, int w)
{
flags.r = r;
flags.w = w;
- return(flags);
+ return flags;
}
static inline struct openflags of_sync(struct openflags flags)
-{
- flags.s = 1;
- return(flags);
+{
+ flags.s = 1;
+ return flags;
}
static inline struct openflags of_create(struct openflags flags)
-{
- flags.c = 1;
- return(flags);
+{
+ flags.c = 1;
+ return flags;
}
-
+
static inline struct openflags of_trunc(struct openflags flags)
-{
- flags.t = 1;
- return(flags);
+{
+ flags.t = 1;
+ return flags;
}
-
+
static inline struct openflags of_append(struct openflags flags)
-{
- flags.a = 1;
- return(flags);
+{
+ flags.a = 1;
+ return flags;
}
-
+
static inline struct openflags of_excl(struct openflags flags)
-{
- flags.e = 1;
- return(flags);
+{
+ flags.e = 1;
+ return flags;
}
static inline struct openflags of_cloexec(struct openflags flags)
-{
- flags.cl = 1;
- return(flags);
+{
+ flags.cl = 1;
+ return flags;
}
-
+
/* file.c */
extern int os_stat_file(const char *file_name, struct uml_stat *buf);
extern int os_stat_fd(const int fd, struct uml_stat *buf);
extern int os_getpgrp(void);
extern void init_new_thread_stack(void *sig_stack, void (*usr1_handler)(int));
-extern void init_new_thread_signals(int altstack);
+extern void init_new_thread_signals(void);
extern int run_kernel_thread(int (*fn)(void *), void *arg, void **jmp_ptr);
extern int os_map_memory(void *virt, int fd, unsigned long long off,
unsigned long len, int r, int w, int x);
-extern int os_protect_memory(void *addr, unsigned long len,
+extern int os_protect_memory(void *addr, unsigned long len,
int r, int w, int x);
extern int os_unmap_memory(void *addr, int len);
extern int os_drop_memory(void *addr, int length);
/* irq.c */
extern int os_waiting_for_events(struct irq_fd *active_fds);
-extern int os_isatty(int fd);
extern int os_create_pollfd(int fd, int events, void *tmp_pfd, int size_tmpfds);
extern void os_free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg,
struct irq_fd *active_fds, struct irq_fd ***last_irq_ptr2);
extern void init_irq_signals(int on_sigstack);
/* sigio.c */
-extern void write_sigio_workaround(void);
-extern int add_sigio_fd(int fd, int read);
extern int ignore_sigio_fd(int fd);
+extern void maybe_sigio_broken(int fd, int read);
/* skas/trap */
extern void sig_handler_common_skas(int sig, void *sc_ptr);
extern void force_flush_all_skas(void);
extern long execute_syscall_skas(void *r);
extern void before_mem_skas(unsigned long unused);
-extern unsigned long set_task_sizes_skas(int arg, unsigned long *host_size_out,
- unsigned long *task_size_out);
+extern unsigned long set_task_sizes_skas(unsigned long *task_size_out);
extern int start_uml_skas(void);
extern int external_pid_skas(struct task_struct *task);
extern int thread_pid_skas(struct task_struct *task);
extern void force_flush_all_tt(void);
extern long execute_syscall_tt(void *r);
extern void before_mem_tt(unsigned long brk_start);
-extern unsigned long set_task_sizes_tt(int arg, unsigned long *host_size_out,
- unsigned long *task_size_out);
+extern unsigned long set_task_sizes_tt(unsigned long *task_size_out);
extern int start_uml_tt(void);
extern int external_pid_tt(struct task_struct *task);
extern int thread_pid_tt(struct task_struct *task);
extra-y := vmlinux.lds
clean-files :=
-obj-y = config.o exec_kern.o exitcode.o \
- init_task.o irq.o ksyms.o mem.o physmem.o \
- process_kern.o ptrace.o reboot.o resource.o sigio_kern.o \
- signal_kern.o smp.o syscall_kern.o sysrq.o \
- time_kern.o tlb.o trap_kern.o uaccess.o um_arch.o umid.o
+obj-y = config.o exec.o exitcode.o init_task.o irq.o ksyms.o mem.o \
+ physmem.o process_kern.o ptrace.o reboot.o resource.o sigio.o \
+ signal.o smp.o syscall.o sysrq.o time.o tlb.o trap.o uaccess.o \
+ um_arch.o umid.o
obj-$(CONFIG_BLK_DEV_INITRD) += initrd.o
obj-$(CONFIG_GPROF) += gprof_syms.o
obj-$(CONFIG_GCOV) += gmon_syms.o
-obj-$(CONFIG_SYSCALL_DEBUG) += syscall.o
obj-$(CONFIG_MODE_TT) += tt/
obj-$(CONFIG_MODE_SKAS) += skas/
--- /dev/null
+/*
+ * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#include "linux/slab.h"
+#include "linux/smp_lock.h"
+#include "linux/ptrace.h"
+#include "asm/ptrace.h"
+#include "asm/pgtable.h"
+#include "asm/tlbflush.h"
+#include "asm/uaccess.h"
+#include "user_util.h"
+#include "kern_util.h"
+#include "mem_user.h"
+#include "kern.h"
+#include "irq_user.h"
+#include "tlb.h"
+#include "os.h"
+#include "choose-mode.h"
+#include "mode_kern.h"
+
+void flush_thread(void)
+{
+ arch_flush_thread(¤t->thread.arch);
+ CHOOSE_MODE(flush_thread_tt(), flush_thread_skas());
+}
+
+void start_thread(struct pt_regs *regs, unsigned long eip, unsigned long esp)
+{
+ CHOOSE_MODE_PROC(start_thread_tt, start_thread_skas, regs, eip, esp);
+}
+
+#ifdef CONFIG_TTY_LOG
+extern void log_exec(char **argv, void *tty);
+#endif
+
+static long execve1(char *file, char __user * __user *argv,
+ char __user *__user *env)
+{
+ long error;
+
+#ifdef CONFIG_TTY_LOG
+ task_lock(current);
+ log_exec(argv, current->signal->tty);
+ task_unlock(current);
+#endif
+ error = do_execve(file, argv, env, ¤t->thread.regs);
+ if (error == 0){
+ task_lock(current);
+ current->ptrace &= ~PT_DTRACE;
+#ifdef SUBARCH_EXECVE1
+ SUBARCH_EXECVE1(¤t->thread.regs.regs);
+#endif
+ task_unlock(current);
+ set_cmdline(current_cmd());
+ }
+ return(error);
+}
+
+long um_execve(char *file, char __user *__user *argv, char __user *__user *env)
+{
+ long err;
+
+ err = execve1(file, argv, env);
+ if(!err)
+ do_longjmp(current->thread.exec_buf, 1);
+ return(err);
+}
+
+long sys_execve(char __user *file, char __user *__user *argv,
+ char __user *__user *env)
+{
+ long error;
+ char *filename;
+
+ lock_kernel();
+ filename = getname(file);
+ error = PTR_ERR(filename);
+ if (IS_ERR(filename)) goto out;
+ error = execve1(filename, argv, env);
+ putname(filename);
+ out:
+ unlock_kernel();
+ return(error);
+}
+++ /dev/null
-/*
- * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#include "linux/slab.h"
-#include "linux/smp_lock.h"
-#include "linux/ptrace.h"
-#include "asm/ptrace.h"
-#include "asm/pgtable.h"
-#include "asm/tlbflush.h"
-#include "asm/uaccess.h"
-#include "user_util.h"
-#include "kern_util.h"
-#include "mem_user.h"
-#include "kern.h"
-#include "irq_user.h"
-#include "tlb.h"
-#include "os.h"
-#include "choose-mode.h"
-#include "mode_kern.h"
-
-void flush_thread(void)
-{
- arch_flush_thread(¤t->thread.arch);
- CHOOSE_MODE(flush_thread_tt(), flush_thread_skas());
-}
-
-void start_thread(struct pt_regs *regs, unsigned long eip, unsigned long esp)
-{
- CHOOSE_MODE_PROC(start_thread_tt, start_thread_skas, regs, eip, esp);
-}
-
-static long execve1(char *file, char __user * __user *argv,
- char __user *__user *env)
-{
- long error;
-
-#ifdef CONFIG_TTY_LOG
- log_exec(argv, current->tty);
-#endif
- error = do_execve(file, argv, env, ¤t->thread.regs);
- if (error == 0){
- task_lock(current);
- current->ptrace &= ~PT_DTRACE;
- task_unlock(current);
- set_cmdline(current_cmd());
- }
- return(error);
-}
-
-long um_execve(char *file, char __user *__user *argv, char __user *__user *env)
-{
- long err;
-
- err = execve1(file, argv, env);
- if(!err)
- do_longjmp(current->thread.exec_buf, 1);
- return(err);
-}
-
-long sys_execve(char __user *file, char __user *__user *argv,
- char __user *__user *env)
-{
- long error;
- char *filename;
-
- lock_kernel();
- filename = getname(file);
- error = PTR_ERR(filename);
- if (IS_ERR(filename)) goto out;
- error = execve1(filename, argv, env);
- putname(filename);
- out:
- unlock_kernel();
- return(error);
-}
free_irqs();
}
-static void maybe_sigio_broken(int fd, int type)
-{
- if (os_isatty(fd)) {
- if ((type == IRQ_WRITE) && !pty_output_sigio) {
- write_sigio_workaround();
- add_sigio_fd(fd, 0);
- } else if ((type == IRQ_READ) && !pty_close_sigio) {
- write_sigio_workaround();
- add_sigio_fd(fd, 1);
- }
- }
-}
+static DEFINE_SPINLOCK(irq_lock);
int activate_fd(int irq, int fd, int type, void *dev_id)
{
* this is called only from process context, and can be locked with
* a semaphore.
*/
- flags = irq_lock();
+ spin_lock_irqsave(&irq_lock, flags);
for (irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next) {
if ((irq_fd->fd == fd) && (irq_fd->type == type)) {
printk("Registering fd %d twice\n", fd);
* so we will not be able to put new pollfd struct to pollfds
* then we free the buffer tmp_fds and try again.
*/
- irq_unlock(flags);
+ spin_unlock_irqrestore(&irq_lock, flags);
kfree(tmp_pfd);
tmp_pfd = NULL;
if (tmp_pfd == NULL)
goto out_kfree;
- flags = irq_lock();
+ spin_lock_irqsave(&irq_lock, flags);
}
/*-------------*/
*last_irq_ptr = new_fd;
last_irq_ptr = &new_fd->next;
- irq_unlock(flags);
+ spin_unlock_irqrestore(&irq_lock, flags);
/* This calls activate_fd, so it has to be outside the critical
* section.
*/
- maybe_sigio_broken(fd, type);
+ maybe_sigio_broken(fd, (type == IRQ_READ));
return(0);
out_unlock:
- irq_unlock(flags);
+ spin_unlock_irqrestore(&irq_lock, flags);
out_kfree:
kfree(new_fd);
out:
{
unsigned long flags;
- flags = irq_lock();
+ spin_lock_irqsave(&irq_lock, flags);
os_free_irq_by_cb(test, arg, active_fds, &last_irq_ptr);
- irq_unlock(flags);
+ spin_unlock_irqrestore(&irq_lock, flags);
}
struct irq_and_dev {
unsigned long flags;
int i;
- flags = irq_lock();
+ spin_lock_irqsave(&irq_lock, flags);
irq = find_irq_by_fd(fd, irqnum, &i);
if (irq == NULL) {
- irq_unlock(flags);
+ spin_unlock_irqrestore(&irq_lock, flags);
return;
}
os_set_pollfd(i, irq->fd);
- irq_unlock(flags);
+ spin_unlock_irqrestore(&irq_lock, flags);
/* This calls activate_fd, so it has to be outside the critical
* section.
*/
- maybe_sigio_broken(fd, irq->type);
+ maybe_sigio_broken(fd, (irq->type == IRQ_READ));
}
void deactivate_fd(int fd, int irqnum)
unsigned long flags;
int i;
- flags = irq_lock();
+ spin_lock_irqsave(&irq_lock, flags);
irq = find_irq_by_fd(fd, irqnum, &i);
if (irq == NULL)
goto out;
os_set_pollfd(i, -1);
out:
- irq_unlock(flags);
+ spin_unlock_irqrestore(&irq_lock, flags);
}
int deactivate_all_fds(void)
return 0;
}
+#ifdef CONFIG_MODE_TT
void forward_interrupts(int pid)
{
struct irq_fd *irq;
unsigned long flags;
int err;
- flags = irq_lock();
+ spin_lock_irqsave(&irq_lock, flags);
for (irq = active_fds; irq != NULL; irq = irq->next) {
err = os_set_owner(irq->fd, pid);
if (err < 0) {
irq->pid = pid;
}
- irq_unlock(flags);
+ spin_unlock_irqrestore(&irq_lock, flags);
}
+#endif
/*
* do_IRQ handles all normal device IRQ's (the special
EXPORT_SYMBOL(um_request_irq);
EXPORT_SYMBOL(reactivate_fd);
-static DEFINE_SPINLOCK(irq_spinlock);
-
-unsigned long irq_lock(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&irq_spinlock, flags);
- return flags;
-}
-
-void irq_unlock(unsigned long flags)
-{
- spin_unlock_irqrestore(&irq_spinlock, flags);
-}
-
/* hw_interrupt_type must define (startup || enable) &&
* (shutdown || disable) && end */
static void dummy(unsigned int irq)
EXPORT_SYMBOL(do_gettimeofday);
EXPORT_SYMBOL(do_settimeofday);
-/* This is here because UML expands lseek to sys_lseek, not to a system
- * call instruction.
- */
-EXPORT_SYMBOL(sys_lseek);
-EXPORT_SYMBOL(sys_wait4);
-
#ifdef CONFIG_SMP
/* required for SMP */
#include "init.h"
#include "kern_constants.h"
-extern char __binary_start;
-
/* Changed during early boot */
unsigned long *empty_zero_page = NULL;
unsigned long *empty_bad_page = NULL;
void mem_init(void)
{
- unsigned long start;
-
max_low_pfn = (high_physmem - uml_physmem) >> PAGE_SHIFT;
/* clear the zero-page */
free_bootmem(__pa(brk_end), uml_reserved - brk_end);
uml_reserved = brk_end;
- /* Fill in any hole at the start of the binary */
- start = (unsigned long) &__binary_start & PAGE_MASK;
- if(uml_physmem != start){
- map_memory(uml_physmem, __pa(uml_physmem), start - uml_physmem,
- 1, 1, 0);
- }
-
/* this will put all low memory onto the freelists */
totalram_pages = free_all_bootmem();
totalhigh_pages = highmem >> PAGE_SHIFT;
}
}
-extern int __syscall_stub_start, __binary_start;
+extern int __syscall_stub_start;
void setup_physmem(unsigned long start, unsigned long reserve_end,
unsigned long len, unsigned long long highmem)
--- /dev/null
+/*
+ * Copyright (C) 2002 - 2003 Jeff Dike (jdike@addtoit.com)
+ * Licensed under the GPL
+ */
+
+#include "linux/kernel.h"
+#include "linux/list.h"
+#include "linux/slab.h"
+#include "linux/signal.h"
+#include "linux/interrupt.h"
+#include "init.h"
+#include "sigio.h"
+#include "irq_user.h"
+#include "irq_kern.h"
+#include "os.h"
+
+/* Protected by sigio_lock() called from write_sigio_workaround */
+static int sigio_irq_fd = -1;
+
+static irqreturn_t sigio_interrupt(int irq, void *data, struct pt_regs *unused)
+{
+ char c;
+
+ os_read_file(sigio_irq_fd, &c, sizeof(c));
+ reactivate_fd(sigio_irq_fd, SIGIO_WRITE_IRQ);
+ return(IRQ_HANDLED);
+}
+
+int write_sigio_irq(int fd)
+{
+ int err;
+
+ err = um_request_irq(SIGIO_WRITE_IRQ, fd, IRQ_READ, sigio_interrupt,
+ IRQF_DISABLED|IRQF_SAMPLE_RANDOM, "write sigio",
+ NULL);
+ if(err){
+ printk("write_sigio_irq : um_request_irq failed, err = %d\n",
+ err);
+ return(-1);
+ }
+ sigio_irq_fd = fd;
+ return(0);
+}
+
+static DEFINE_SPINLOCK(sigio_spinlock);
+
+void sigio_lock(void)
+{
+ spin_lock(&sigio_spinlock);
+}
+
+void sigio_unlock(void)
+{
+ spin_unlock(&sigio_spinlock);
+}
+++ /dev/null
-/*
- * Copyright (C) 2002 - 2003 Jeff Dike (jdike@addtoit.com)
- * Licensed under the GPL
- */
-
-#include "linux/kernel.h"
-#include "linux/list.h"
-#include "linux/slab.h"
-#include "linux/signal.h"
-#include "linux/interrupt.h"
-#include "init.h"
-#include "sigio.h"
-#include "irq_user.h"
-#include "irq_kern.h"
-#include "os.h"
-
-/* Protected by sigio_lock() called from write_sigio_workaround */
-static int sigio_irq_fd = -1;
-
-static irqreturn_t sigio_interrupt(int irq, void *data, struct pt_regs *unused)
-{
- char c;
-
- os_read_file(sigio_irq_fd, &c, sizeof(c));
- reactivate_fd(sigio_irq_fd, SIGIO_WRITE_IRQ);
- return(IRQ_HANDLED);
-}
-
-int write_sigio_irq(int fd)
-{
- int err;
-
- err = um_request_irq(SIGIO_WRITE_IRQ, fd, IRQ_READ, sigio_interrupt,
- IRQF_DISABLED | IRQF_SAMPLE_RANDOM, "write sigio",
- NULL);
- if(err){
- printk("write_sigio_irq : um_request_irq failed, err = %d\n",
- err);
- return(-1);
- }
- sigio_irq_fd = fd;
- return(0);
-}
-
-static DEFINE_SPINLOCK(sigio_spinlock);
-
-void sigio_lock(void)
-{
- spin_lock(&sigio_spinlock);
-}
-
-void sigio_unlock(void)
-{
- spin_unlock(&sigio_spinlock);
-}
-
-extern void sigio_cleanup(void);
-__uml_exitcall(sigio_cleanup);
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
--- /dev/null
+/*
+ * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#include "linux/config.h"
+#include "linux/stddef.h"
+#include "linux/sys.h"
+#include "linux/sched.h"
+#include "linux/wait.h"
+#include "linux/kernel.h"
+#include "linux/smp_lock.h"
+#include "linux/module.h"
+#include "linux/slab.h"
+#include "linux/tty.h"
+#include "linux/binfmts.h"
+#include "linux/ptrace.h"
+#include "asm/signal.h"
+#include "asm/uaccess.h"
+#include "asm/unistd.h"
+#include "user_util.h"
+#include "asm/ucontext.h"
+#include "kern_util.h"
+#include "signal_kern.h"
+#include "kern.h"
+#include "frame_kern.h"
+#include "sigcontext.h"
+#include "mode.h"
+
+EXPORT_SYMBOL(block_signals);
+EXPORT_SYMBOL(unblock_signals);
+
+#define _S(nr) (1<<((nr)-1))
+
+#define _BLOCKABLE (~(_S(SIGKILL) | _S(SIGSTOP)))
+
+/*
+ * OK, we're invoking a handler
+ */
+static int handle_signal(struct pt_regs *regs, unsigned long signr,
+ struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *oldset)
+{
+ unsigned long sp;
+ int err;
+
+ /* Always make any pending restarted system calls return -EINTR */
+ current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+ /* Did we come from a system call? */
+ if(PT_REGS_SYSCALL_NR(regs) >= 0){
+ /* If so, check system call restarting.. */
+ switch(PT_REGS_SYSCALL_RET(regs)){
+ case -ERESTART_RESTARTBLOCK:
+ case -ERESTARTNOHAND:
+ PT_REGS_SYSCALL_RET(regs) = -EINTR;
+ break;
+
+ case -ERESTARTSYS:
+ if (!(ka->sa.sa_flags & SA_RESTART)) {
+ PT_REGS_SYSCALL_RET(regs) = -EINTR;
+ break;
+ }
+ /* fallthrough */
+ case -ERESTARTNOINTR:
+ PT_REGS_RESTART_SYSCALL(regs);
+ PT_REGS_ORIG_SYSCALL(regs) = PT_REGS_SYSCALL_NR(regs);
+ break;
+ }
+ }
+
+ sp = PT_REGS_SP(regs);
+ if((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags(sp) == 0))
+ sp = current->sas_ss_sp + current->sas_ss_size;
+
+#ifdef CONFIG_ARCH_HAS_SC_SIGNALS
+ if(!(ka->sa.sa_flags & SA_SIGINFO))
+ err = setup_signal_stack_sc(sp, signr, ka, regs, oldset);
+ else
+#endif
+ err = setup_signal_stack_si(sp, signr, ka, regs, info, oldset);
+
+ if(err){
+ spin_lock_irq(¤t->sighand->siglock);
+ current->blocked = *oldset;
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+ force_sigsegv(signr, current);
+ } else {
+ spin_lock_irq(¤t->sighand->siglock);
+ sigorsets(¤t->blocked, ¤t->blocked,
+ &ka->sa.sa_mask);
+ if(!(ka->sa.sa_flags & SA_NODEFER))
+ sigaddset(¤t->blocked, signr);
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+ }
+
+ return err;
+}
+
+static int kern_do_signal(struct pt_regs *regs)
+{
+ struct k_sigaction ka_copy;
+ siginfo_t info;
+ sigset_t *oldset;
+ int sig, handled_sig = 0;
+
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = ¤t->saved_sigmask;
+ else
+ oldset = ¤t->blocked;
+
+ while((sig = get_signal_to_deliver(&info, &ka_copy, regs, NULL)) > 0){
+ handled_sig = 1;
+ /* Whee! Actually deliver the signal. */
+ if(!handle_signal(regs, sig, &ka_copy, &info, oldset)){
+ /* a signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TIF_RESTORE_SIGMASK flag */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ break;
+ }
+ }
+
+ /* Did we come from a system call? */
+ if(!handled_sig && (PT_REGS_SYSCALL_NR(regs) >= 0)){
+ /* Restart the system call - no handlers present */
+ switch(PT_REGS_SYSCALL_RET(regs)){
+ case -ERESTARTNOHAND:
+ case -ERESTARTSYS:
+ case -ERESTARTNOINTR:
+ PT_REGS_ORIG_SYSCALL(regs) = PT_REGS_SYSCALL_NR(regs);
+ PT_REGS_RESTART_SYSCALL(regs);
+ break;
+ case -ERESTART_RESTARTBLOCK:
+ PT_REGS_ORIG_SYSCALL(regs) = __NR_restart_syscall;
+ PT_REGS_RESTART_SYSCALL(regs);
+ break;
+ }
+ }
+
+ /* This closes a way to execute a system call on the host. If
+ * you set a breakpoint on a system call instruction and singlestep
+ * from it, the tracing thread used to PTRACE_SINGLESTEP the process
+ * rather than PTRACE_SYSCALL it, allowing the system call to execute
+ * on the host. The tracing thread will check this flag and
+ * PTRACE_SYSCALL if necessary.
+ */
+ if(current->ptrace & PT_DTRACE)
+ current->thread.singlestep_syscall =
+ is_syscall(PT_REGS_IP(¤t->thread.regs));
+
+ /* if there's no signal to deliver, we just put the saved sigmask
+ * back */
+ if (!handled_sig && test_thread_flag(TIF_RESTORE_SIGMASK)) {
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ }
+ return(handled_sig);
+}
+
+int do_signal(void)
+{
+ return(kern_do_signal(¤t->thread.regs));
+}
+
+/*
+ * Atomically swap in the new signal mask, and wait for a signal.
+ */
+long sys_sigsuspend(int history0, int history1, old_sigset_t mask)
+{
+ mask &= _BLOCKABLE;
+ spin_lock_irq(¤t->sighand->siglock);
+ current->saved_sigmask = current->blocked;
+ siginitset(¤t->blocked, mask);
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ set_thread_flag(TIF_RESTORE_SIGMASK);
+ return -ERESTARTNOHAND;
+}
+
+long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss)
+{
+ return(do_sigaltstack(uss, uoss, PT_REGS_SP(¤t->thread.regs)));
+}
+++ /dev/null
-/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#include "linux/config.h"
-#include "linux/stddef.h"
-#include "linux/sys.h"
-#include "linux/sched.h"
-#include "linux/wait.h"
-#include "linux/kernel.h"
-#include "linux/smp_lock.h"
-#include "linux/module.h"
-#include "linux/slab.h"
-#include "linux/tty.h"
-#include "linux/binfmts.h"
-#include "linux/ptrace.h"
-#include "asm/signal.h"
-#include "asm/uaccess.h"
-#include "asm/unistd.h"
-#include "user_util.h"
-#include "asm/ucontext.h"
-#include "kern_util.h"
-#include "signal_kern.h"
-#include "kern.h"
-#include "frame_kern.h"
-#include "sigcontext.h"
-#include "mode.h"
-
-EXPORT_SYMBOL(block_signals);
-EXPORT_SYMBOL(unblock_signals);
-
-#define _S(nr) (1<<((nr)-1))
-
-#define _BLOCKABLE (~(_S(SIGKILL) | _S(SIGSTOP)))
-
-/*
- * OK, we're invoking a handler
- */
-static int handle_signal(struct pt_regs *regs, unsigned long signr,
- struct k_sigaction *ka, siginfo_t *info,
- sigset_t *oldset)
-{
- unsigned long sp;
- int err;
-
- /* Always make any pending restarted system calls return -EINTR */
- current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
- /* Did we come from a system call? */
- if(PT_REGS_SYSCALL_NR(regs) >= 0){
- /* If so, check system call restarting.. */
- switch(PT_REGS_SYSCALL_RET(regs)){
- case -ERESTART_RESTARTBLOCK:
- case -ERESTARTNOHAND:
- PT_REGS_SYSCALL_RET(regs) = -EINTR;
- break;
-
- case -ERESTARTSYS:
- if (!(ka->sa.sa_flags & SA_RESTART)) {
- PT_REGS_SYSCALL_RET(regs) = -EINTR;
- break;
- }
- /* fallthrough */
- case -ERESTARTNOINTR:
- PT_REGS_RESTART_SYSCALL(regs);
- PT_REGS_ORIG_SYSCALL(regs) = PT_REGS_SYSCALL_NR(regs);
- break;
- }
- }
-
- sp = PT_REGS_SP(regs);
- if((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags(sp) == 0))
- sp = current->sas_ss_sp + current->sas_ss_size;
-
-#ifdef CONFIG_ARCH_HAS_SC_SIGNALS
- if(!(ka->sa.sa_flags & SA_SIGINFO))
- err = setup_signal_stack_sc(sp, signr, ka, regs, oldset);
- else
-#endif
- err = setup_signal_stack_si(sp, signr, ka, regs, info, oldset);
-
- if(err){
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = *oldset;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
- force_sigsegv(signr, current);
- } else {
- spin_lock_irq(¤t->sighand->siglock);
- sigorsets(¤t->blocked, ¤t->blocked,
- &ka->sa.sa_mask);
- if(!(ka->sa.sa_flags & SA_NODEFER))
- sigaddset(¤t->blocked, signr);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
- }
-
- return err;
-}
-
-static int kern_do_signal(struct pt_regs *regs)
-{
- struct k_sigaction ka_copy;
- siginfo_t info;
- sigset_t *oldset;
- int sig, handled_sig = 0;
-
- if (test_thread_flag(TIF_RESTORE_SIGMASK))
- oldset = ¤t->saved_sigmask;
- else
- oldset = ¤t->blocked;
-
- while((sig = get_signal_to_deliver(&info, &ka_copy, regs, NULL)) > 0){
- handled_sig = 1;
- /* Whee! Actually deliver the signal. */
- if(!handle_signal(regs, sig, &ka_copy, &info, oldset)){
- /* a signal was successfully delivered; the saved
- * sigmask will have been stored in the signal frame,
- * and will be restored by sigreturn, so we can simply
- * clear the TIF_RESTORE_SIGMASK flag */
- if (test_thread_flag(TIF_RESTORE_SIGMASK))
- clear_thread_flag(TIF_RESTORE_SIGMASK);
- break;
- }
- }
-
- /* Did we come from a system call? */
- if(!handled_sig && (PT_REGS_SYSCALL_NR(regs) >= 0)){
- /* Restart the system call - no handlers present */
- switch(PT_REGS_SYSCALL_RET(regs)){
- case -ERESTARTNOHAND:
- case -ERESTARTSYS:
- case -ERESTARTNOINTR:
- PT_REGS_ORIG_SYSCALL(regs) = PT_REGS_SYSCALL_NR(regs);
- PT_REGS_RESTART_SYSCALL(regs);
- break;
- case -ERESTART_RESTARTBLOCK:
- PT_REGS_SYSCALL_RET(regs) = __NR_restart_syscall;
- PT_REGS_RESTART_SYSCALL(regs);
- break;
- }
- }
-
- /* This closes a way to execute a system call on the host. If
- * you set a breakpoint on a system call instruction and singlestep
- * from it, the tracing thread used to PTRACE_SINGLESTEP the process
- * rather than PTRACE_SYSCALL it, allowing the system call to execute
- * on the host. The tracing thread will check this flag and
- * PTRACE_SYSCALL if necessary.
- */
- if(current->ptrace & PT_DTRACE)
- current->thread.singlestep_syscall =
- is_syscall(PT_REGS_IP(¤t->thread.regs));
-
- /* if there's no signal to deliver, we just put the saved sigmask
- * back */
- if (!handled_sig && test_thread_flag(TIF_RESTORE_SIGMASK)) {
- clear_thread_flag(TIF_RESTORE_SIGMASK);
- sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
- }
- return(handled_sig);
-}
-
-int do_signal(void)
-{
- return(kern_do_signal(¤t->thread.regs));
-}
-
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-long sys_sigsuspend(int history0, int history1, old_sigset_t mask)
-{
- mask &= _BLOCKABLE;
- spin_lock_irq(¤t->sighand->siglock);
- current->saved_sigmask = current->blocked;
- siginitset(¤t->blocked, mask);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- set_thread_flag(TIF_RESTORE_SIGMASK);
- return -ERESTARTNOHAND;
-}
-
-long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss)
-{
- return(do_sigaltstack(uss, uoss, PT_REGS_SP(¤t->thread.regs)));
-}
#include "mem_user.h"
#include "skas.h"
-unsigned long set_task_sizes_skas(int arg, unsigned long *host_size_out,
- unsigned long *task_size_out)
+unsigned long set_task_sizes_skas(unsigned long *task_size_out)
{
/* Round up to the nearest 4M */
- unsigned long top = ROUND_4M((unsigned long) &arg);
+ unsigned long host_task_size = ROUND_4M((unsigned long)
+ &host_task_size);
#ifdef CONFIG_HOST_TASK_SIZE
- *host_size_out = CONFIG_HOST_TASK_SIZE;
+ *host_size_out = ROUND_4M(CONFIG_HOST_TASK_SIZE);
*task_size_out = CONFIG_HOST_TASK_SIZE;
#else
- *host_size_out = top;
if (!skas_needs_stub)
- *task_size_out = top;
+ *task_size_out = host_task_size;
else *task_size_out = CONFIG_STUB_START & PGDIR_MASK;
#endif
- return(((unsigned long) set_task_sizes_skas) & ~0xffffff);
+ return host_task_size;
}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
if(proc_mm)
userspace_pid[0] = start_userspace(0);
- init_new_thread_signals(1);
+ init_new_thread_signals();
init_task.thread.request.u.thread.proc = start_kernel_proc;
init_task.thread.request.u.thread.arg = NULL;
struct pt_regs *regs = container_of(r, struct pt_regs, regs);
long result;
int syscall;
-#ifdef UML_CONFIG_SYSCALL_DEBUG
- int index;
- index = record_syscall_start(UPT_SYSCALL_NR(r));
-#endif
syscall_trace(r, 0);
current->thread.nsyscalls++;
REGS_SET_SYSCALL_RETURN(r->skas.regs, result);
syscall_trace(r, 1);
-#ifdef UML_CONFIG_SYSCALL_DEBUG
- record_syscall_end(index, result);
-#endif
}
/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2003 Jeff Dike (jdike@addtoit.com)
* Licensed under the GPL
*/
+#include "linux/sched.h"
+#include "linux/file.h"
+#include "linux/smp_lock.h"
+#include "linux/mm.h"
+#include "linux/utsname.h"
+#include "linux/msg.h"
+#include "linux/shm.h"
+#include "linux/sys.h"
+#include "linux/syscalls.h"
+#include "linux/unistd.h"
+#include "linux/slab.h"
+#include "linux/utime.h"
+#include "asm/mman.h"
+#include "asm/uaccess.h"
#include "kern_util.h"
-#include "syscall.h"
-#include "os.h"
+#include "user_util.h"
+#include "sysdep/syscalls.h"
+#include "mode_kern.h"
+#include "choose-mode.h"
-struct {
- int syscall;
- int pid;
- long result;
- unsigned long long start;
- unsigned long long end;
-} syscall_record[1024];
+/* Unlocked, I don't care if this is a bit off */
+int nsyscalls = 0;
-int record_syscall_start(int syscall)
+long sys_fork(void)
{
- int max, index;
+ long ret;
- max = sizeof(syscall_record)/sizeof(syscall_record[0]);
- index = next_syscall_index(max);
+ current->thread.forking = 1;
+ ret = do_fork(SIGCHLD, UPT_SP(¤t->thread.regs.regs),
+ ¤t->thread.regs, 0, NULL, NULL);
+ current->thread.forking = 0;
+ return(ret);
+}
+
+long sys_vfork(void)
+{
+ long ret;
+
+ current->thread.forking = 1;
+ ret = do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD,
+ UPT_SP(¤t->thread.regs.regs),
+ ¤t->thread.regs, 0, NULL, NULL);
+ current->thread.forking = 0;
+ return(ret);
+}
+
+/* common code for old and new mmaps */
+long sys_mmap2(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long pgoff)
+{
+ long error = -EBADF;
+ struct file * file = NULL;
+
+ flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+ if (!(flags & MAP_ANONYMOUS)) {
+ file = fget(fd);
+ if (!file)
+ goto out;
+ }
+
+ down_write(¤t->mm->mmap_sem);
+ error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+ up_write(¤t->mm->mmap_sem);
+
+ if (file)
+ fput(file);
+ out:
+ return error;
+}
+
+long old_mmap(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long offset)
+{
+ long err = -EINVAL;
+ if (offset & ~PAGE_MASK)
+ goto out;
+
+ err = sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
+ out:
+ return err;
+}
+/*
+ * sys_pipe() is the normal C calling standard for creating
+ * a pipe. It's not the way unix traditionally does this, though.
+ */
+long sys_pipe(unsigned long __user * fildes)
+{
+ int fd[2];
+ long error;
+
+ error = do_pipe(fd);
+ if (!error) {
+ if (copy_to_user(fildes, fd, sizeof(fd)))
+ error = -EFAULT;
+ }
+ return error;
+}
- syscall_record[index].syscall = syscall;
- syscall_record[index].pid = current_pid();
- syscall_record[index].result = 0xdeadbeef;
- syscall_record[index].start = os_nsecs();
- return(index);
+
+long sys_uname(struct old_utsname __user * name)
+{
+ long err;
+ if (!name)
+ return -EFAULT;
+ down_read(&uts_sem);
+ err = copy_to_user(name, &system_utsname, sizeof (*name));
+ up_read(&uts_sem);
+ return err?-EFAULT:0;
}
-void record_syscall_end(int index, long result)
+long sys_olduname(struct oldold_utsname __user * name)
{
- syscall_record[index].result = result;
- syscall_record[index].end = os_nsecs();
+ long error;
+
+ if (!name)
+ return -EFAULT;
+ if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname)))
+ return -EFAULT;
+
+ down_read(&uts_sem);
+
+ error = __copy_to_user(&name->sysname,&system_utsname.sysname,
+ __OLD_UTS_LEN);
+ error |= __put_user(0,name->sysname+__OLD_UTS_LEN);
+ error |= __copy_to_user(&name->nodename,&system_utsname.nodename,
+ __OLD_UTS_LEN);
+ error |= __put_user(0,name->nodename+__OLD_UTS_LEN);
+ error |= __copy_to_user(&name->release,&system_utsname.release,
+ __OLD_UTS_LEN);
+ error |= __put_user(0,name->release+__OLD_UTS_LEN);
+ error |= __copy_to_user(&name->version,&system_utsname.version,
+ __OLD_UTS_LEN);
+ error |= __put_user(0,name->version+__OLD_UTS_LEN);
+ error |= __copy_to_user(&name->machine,&system_utsname.machine,
+ __OLD_UTS_LEN);
+ error |= __put_user(0,name->machine+__OLD_UTS_LEN);
+
+ up_read(&uts_sem);
+
+ error = error ? -EFAULT : 0;
+
+ return error;
+}
+
+DEFINE_SPINLOCK(syscall_lock);
+
+static int syscall_index = 0;
+
+int next_syscall_index(int limit)
+{
+ int ret;
+
+ spin_lock(&syscall_lock);
+ ret = syscall_index;
+ if(++syscall_index == limit)
+ syscall_index = 0;
+ spin_unlock(&syscall_lock);
+ return(ret);
}
+++ /dev/null
-/*
- * Copyright (C) 2000 - 2003 Jeff Dike (jdike@addtoit.com)
- * Licensed under the GPL
- */
-
-#include "linux/sched.h"
-#include "linux/file.h"
-#include "linux/smp_lock.h"
-#include "linux/mm.h"
-#include "linux/utsname.h"
-#include "linux/msg.h"
-#include "linux/shm.h"
-#include "linux/sys.h"
-#include "linux/syscalls.h"
-#include "linux/unistd.h"
-#include "linux/slab.h"
-#include "linux/utime.h"
-#include "asm/mman.h"
-#include "asm/uaccess.h"
-#include "kern_util.h"
-#include "user_util.h"
-#include "sysdep/syscalls.h"
-#include "mode_kern.h"
-#include "choose-mode.h"
-
-/* Unlocked, I don't care if this is a bit off */
-int nsyscalls = 0;
-
-long sys_fork(void)
-{
- long ret;
-
- current->thread.forking = 1;
- ret = do_fork(SIGCHLD, UPT_SP(¤t->thread.regs.regs),
- ¤t->thread.regs, 0, NULL, NULL);
- current->thread.forking = 0;
- return(ret);
-}
-
-long sys_vfork(void)
-{
- long ret;
-
- current->thread.forking = 1;
- ret = do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD,
- UPT_SP(¤t->thread.regs.regs),
- ¤t->thread.regs, 0, NULL, NULL);
- current->thread.forking = 0;
- return(ret);
-}
-
-/* common code for old and new mmaps */
-long sys_mmap2(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, unsigned long pgoff)
-{
- long error = -EBADF;
- struct file * file = NULL;
-
- flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
- if (!(flags & MAP_ANONYMOUS)) {
- file = fget(fd);
- if (!file)
- goto out;
- }
-
- down_write(¤t->mm->mmap_sem);
- error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
- up_write(¤t->mm->mmap_sem);
-
- if (file)
- fput(file);
- out:
- return error;
-}
-
-long old_mmap(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, unsigned long offset)
-{
- long err = -EINVAL;
- if (offset & ~PAGE_MASK)
- goto out;
-
- err = sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
- out:
- return err;
-}
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-long sys_pipe(unsigned long __user * fildes)
-{
- int fd[2];
- long error;
-
- error = do_pipe(fd);
- if (!error) {
- if (copy_to_user(fildes, fd, sizeof(fd)))
- error = -EFAULT;
- }
- return error;
-}
-
-
-long sys_uname(struct old_utsname __user * name)
-{
- long err;
- if (!name)
- return -EFAULT;
- down_read(&uts_sem);
- err=copy_to_user(name, &system_utsname, sizeof (*name));
- up_read(&uts_sem);
- return err?-EFAULT:0;
-}
-
-long sys_olduname(struct oldold_utsname __user * name)
-{
- long error;
-
- if (!name)
- return -EFAULT;
- if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname)))
- return -EFAULT;
-
- down_read(&uts_sem);
-
- error = __copy_to_user(&name->sysname,&system_utsname.sysname,
- __OLD_UTS_LEN);
- error |= __put_user(0,name->sysname+__OLD_UTS_LEN);
- error |= __copy_to_user(&name->nodename,&system_utsname.nodename,
- __OLD_UTS_LEN);
- error |= __put_user(0,name->nodename+__OLD_UTS_LEN);
- error |= __copy_to_user(&name->release,&system_utsname.release,
- __OLD_UTS_LEN);
- error |= __put_user(0,name->release+__OLD_UTS_LEN);
- error |= __copy_to_user(&name->version,&system_utsname.version,
- __OLD_UTS_LEN);
- error |= __put_user(0,name->version+__OLD_UTS_LEN);
- error |= __copy_to_user(&name->machine,&system_utsname.machine,
- __OLD_UTS_LEN);
- error |= __put_user(0,name->machine+__OLD_UTS_LEN);
-
- up_read(&uts_sem);
-
- error = error ? -EFAULT : 0;
-
- return error;
-}
-
-DEFINE_SPINLOCK(syscall_lock);
-
-static int syscall_index = 0;
-
-int next_syscall_index(int limit)
-{
- int ret;
-
- spin_lock(&syscall_lock);
- ret = syscall_index;
- if(++syscall_index == limit)
- syscall_index = 0;
- spin_unlock(&syscall_lock);
- return(ret);
-}
--- /dev/null
+/*
+ * Copyright (C) 2000 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#include "linux/kernel.h"
+#include "linux/module.h"
+#include "linux/unistd.h"
+#include "linux/stddef.h"
+#include "linux/spinlock.h"
+#include "linux/time.h"
+#include "linux/sched.h"
+#include "linux/interrupt.h"
+#include "linux/init.h"
+#include "linux/delay.h"
+#include "linux/hrtimer.h"
+#include "asm/irq.h"
+#include "asm/param.h"
+#include "asm/current.h"
+#include "kern_util.h"
+#include "user_util.h"
+#include "mode.h"
+#include "os.h"
+
+int hz(void)
+{
+ return(HZ);
+}
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ */
+unsigned long long sched_clock(void)
+{
+ return (unsigned long long)jiffies_64 * (1000000000 / HZ);
+}
+
+/* Changed at early boot */
+int timer_irq_inited = 0;
+
+static unsigned long long prev_nsecs;
+#ifdef CONFIG_UML_REAL_TIME_CLOCK
+static long long delta; /* Deviation per interval */
+#endif
+
+void timer_irq(union uml_pt_regs *regs)
+{
+ unsigned long long ticks = 0;
+
+#ifdef CONFIG_UML_REAL_TIME_CLOCK
+ if(prev_nsecs){
+ /* We've had 1 tick */
+ unsigned long long nsecs = os_nsecs();
+
+ delta += nsecs - prev_nsecs;
+ prev_nsecs = nsecs;
+
+ /* Protect against the host clock being set backwards */
+ if(delta < 0)
+ delta = 0;
+
+ ticks += (delta * HZ) / BILLION;
+ delta -= (ticks * BILLION) / HZ;
+ }
+ else prev_nsecs = os_nsecs();
+#else
+ ticks = 1;
+#endif
+ while(ticks > 0){
+ do_IRQ(TIMER_IRQ, regs);
+ ticks--;
+ }
+}
+
+static DEFINE_SPINLOCK(timer_spinlock);
+
+static unsigned long long local_offset = 0;
+
+static inline unsigned long long get_time(void)
+{
+ unsigned long long nsecs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&timer_spinlock, flags);
+ nsecs = os_nsecs();
+ nsecs += local_offset;
+ spin_unlock_irqrestore(&timer_spinlock, flags);
+
+ return nsecs;
+}
+
+irqreturn_t um_timer(int irq, void *dev, struct pt_regs *regs)
+{
+ unsigned long long nsecs;
+ unsigned long flags;
+
+ write_seqlock_irqsave(&xtime_lock, flags);
+
+ do_timer(regs);
+
+ nsecs = get_time() + local_offset;
+ xtime.tv_sec = nsecs / NSEC_PER_SEC;
+ xtime.tv_nsec = nsecs - xtime.tv_sec * NSEC_PER_SEC;
+
+ write_sequnlock_irqrestore(&xtime_lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static void register_timer(void)
+{
+ int err;
+
+ err = request_irq(TIMER_IRQ, um_timer, IRQF_DISABLED, "timer", NULL);
+ if(err != 0)
+ printk(KERN_ERR "timer_init : request_irq failed - "
+ "errno = %d\n", -err);
+
+ timer_irq_inited = 1;
+
+ user_time_init();
+}
+
+extern void (*late_time_init)(void);
+
+void time_init(void)
+{
+ long long nsecs;
+
+ nsecs = os_nsecs();
+ set_normalized_timespec(&wall_to_monotonic, -nsecs / BILLION,
+ -nsecs % BILLION);
+ late_time_init = register_timer;
+}
+
+void do_gettimeofday(struct timeval *tv)
+{
+ unsigned long long nsecs = get_time();
+
+ tv->tv_sec = nsecs / NSEC_PER_SEC;
+ /* Careful about calculations here - this was originally done as
+ * (nsecs - tv->tv_sec * NSEC_PER_SEC) / NSEC_PER_USEC
+ * which gave bogus (> 1000000) values. Dunno why, suspect gcc
+ * (4.0.0) miscompiled it, or there's a subtle 64/32-bit conversion
+ * problem that I missed.
+ */
+ nsecs -= tv->tv_sec * NSEC_PER_SEC;
+ tv->tv_usec = (unsigned long) nsecs / NSEC_PER_USEC;
+}
+
+static inline void set_time(unsigned long long nsecs)
+{
+ unsigned long long now;
+ unsigned long flags;
+
+ spin_lock_irqsave(&timer_spinlock, flags);
+ now = os_nsecs();
+ local_offset = nsecs - now;
+ spin_unlock_irqrestore(&timer_spinlock, flags);
+
+ clock_was_set();
+}
+
+int do_settimeofday(struct timespec *tv)
+{
+ set_time((unsigned long long) tv->tv_sec * NSEC_PER_SEC + tv->tv_nsec);
+
+ return 0;
+}
+
+void timer_handler(int sig, union uml_pt_regs *regs)
+{
+ local_irq_disable();
+ irq_enter();
+ update_process_times(CHOOSE_MODE(
+ (UPT_SC(regs) && user_context(UPT_SP(regs))),
+ (regs)->skas.is_user));
+ irq_exit();
+ local_irq_enable();
+ if(current_thread->cpu == 0)
+ timer_irq(regs);
+}
+++ /dev/null
-/*
- * Copyright (C) 2000 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#include "linux/kernel.h"
-#include "linux/module.h"
-#include "linux/unistd.h"
-#include "linux/stddef.h"
-#include "linux/spinlock.h"
-#include "linux/time.h"
-#include "linux/sched.h"
-#include "linux/interrupt.h"
-#include "linux/init.h"
-#include "linux/delay.h"
-#include "linux/hrtimer.h"
-#include "asm/irq.h"
-#include "asm/param.h"
-#include "asm/current.h"
-#include "kern_util.h"
-#include "user_util.h"
-#include "mode.h"
-#include "os.h"
-
-int hz(void)
-{
- return(HZ);
-}
-
-/*
- * Scheduler clock - returns current time in nanosec units.
- */
-unsigned long long sched_clock(void)
-{
- return (unsigned long long)jiffies_64 * (1000000000 / HZ);
-}
-
-/* Changed at early boot */
-int timer_irq_inited = 0;
-
-static int first_tick;
-static unsigned long long prev_nsecs;
-#ifdef CONFIG_UML_REAL_TIME_CLOCK
-static long long delta; /* Deviation per interval */
-#endif
-
-void timer_irq(union uml_pt_regs *regs)
-{
- unsigned long long ticks = 0;
-
- if(!timer_irq_inited){
- /* This is to ensure that ticks don't pile up when
- * the timer handler is suspended */
- first_tick = 0;
- return;
- }
-
- if(first_tick){
-#ifdef CONFIG_UML_REAL_TIME_CLOCK
- /* We've had 1 tick */
- unsigned long long nsecs = os_nsecs();
-
- delta += nsecs - prev_nsecs;
- prev_nsecs = nsecs;
-
- /* Protect against the host clock being set backwards */
- if(delta < 0)
- delta = 0;
-
- ticks += (delta * HZ) / BILLION;
- delta -= (ticks * BILLION) / HZ;
-#else
- ticks = 1;
-#endif
- }
- else {
- prev_nsecs = os_nsecs();
- first_tick = 1;
- }
-
- while(ticks > 0){
- do_IRQ(TIMER_IRQ, regs);
- ticks--;
- }
-}
-
-
-void time_init_kern(void)
-{
- long long nsecs;
-
- nsecs = os_nsecs();
- set_normalized_timespec(&wall_to_monotonic, -nsecs / BILLION,
- -nsecs % BILLION);
-}
-
-void do_boot_timer_handler(struct sigcontext * sc)
-{
- unsigned long flags;
- struct pt_regs regs;
-
- CHOOSE_MODE((void) (UPT_SC(®s.regs) = sc),
- (void) (regs.regs.skas.is_user = 0));
-
- write_seqlock_irqsave(&xtime_lock, flags);
- do_timer(®s);
- write_sequnlock_irqrestore(&xtime_lock, flags);
-}
-
-static DEFINE_SPINLOCK(timer_spinlock);
-
-static unsigned long long local_offset = 0;
-
-static inline unsigned long long get_time(void)
-{
- unsigned long long nsecs;
- unsigned long flags;
-
- spin_lock_irqsave(&timer_spinlock, flags);
- nsecs = os_nsecs();
- nsecs += local_offset;
- spin_unlock_irqrestore(&timer_spinlock, flags);
-
- return nsecs;
-}
-
-irqreturn_t um_timer(int irq, void *dev, struct pt_regs *regs)
-{
- unsigned long long nsecs;
- unsigned long flags;
-
- write_seqlock_irqsave(&xtime_lock, flags);
-
- do_timer(regs);
-
- nsecs = get_time() + local_offset;
- xtime.tv_sec = nsecs / NSEC_PER_SEC;
- xtime.tv_nsec = nsecs - xtime.tv_sec * NSEC_PER_SEC;
-
- write_sequnlock_irqrestore(&xtime_lock, flags);
-
- return IRQ_HANDLED;
-}
-
-void do_gettimeofday(struct timeval *tv)
-{
- unsigned long long nsecs = get_time();
-
- tv->tv_sec = nsecs / NSEC_PER_SEC;
- /* Careful about calculations here - this was originally done as
- * (nsecs - tv->tv_sec * NSEC_PER_SEC) / NSEC_PER_USEC
- * which gave bogus (> 1000000) values. Dunno why, suspect gcc
- * (4.0.0) miscompiled it, or there's a subtle 64/32-bit conversion
- * problem that I missed.
- */
- nsecs -= tv->tv_sec * NSEC_PER_SEC;
- tv->tv_usec = (unsigned long) nsecs / NSEC_PER_USEC;
-}
-
-static inline void set_time(unsigned long long nsecs)
-{
- unsigned long long now;
- unsigned long flags;
-
- spin_lock_irqsave(&timer_spinlock, flags);
- now = os_nsecs();
- local_offset = nsecs - now;
- spin_unlock_irqrestore(&timer_spinlock, flags);
-
- clock_was_set();
-}
-
-int do_settimeofday(struct timespec *tv)
-{
- set_time((unsigned long long) tv->tv_sec * NSEC_PER_SEC + tv->tv_nsec);
-
- return 0;
-}
-
-void timer_handler(int sig, union uml_pt_regs *regs)
-{
- local_irq_disable();
- irq_enter();
- update_process_times(CHOOSE_MODE(
- (UPT_SC(regs) && user_context(UPT_SP(regs))),
- (regs)->skas.is_user));
- irq_exit();
- local_irq_enable();
- if(current_thread->cpu == 0)
- timer_irq(regs);
-}
-
-int __init timer_init(void)
-{
- int err;
-
- user_time_init();
- err = request_irq(TIMER_IRQ, um_timer, IRQF_DISABLED, "timer", NULL);
- if(err != 0)
- printk(KERN_ERR "timer_init : request_irq failed - "
- "errno = %d\n", -err);
- timer_irq_inited = 1;
- return(0);
-}
-
-arch_initcall(timer_init);
--- /dev/null
+/*
+ * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#include "linux/kernel.h"
+#include "asm/errno.h"
+#include "linux/sched.h"
+#include "linux/mm.h"
+#include "linux/spinlock.h"
+#include "linux/config.h"
+#include "linux/init.h"
+#include "linux/ptrace.h"
+#include "asm/semaphore.h"
+#include "asm/pgtable.h"
+#include "asm/pgalloc.h"
+#include "asm/tlbflush.h"
+#include "asm/a.out.h"
+#include "asm/current.h"
+#include "asm/irq.h"
+#include "sysdep/sigcontext.h"
+#include "user_util.h"
+#include "kern_util.h"
+#include "kern.h"
+#include "chan_kern.h"
+#include "mconsole_kern.h"
+#include "mem.h"
+#include "mem_kern.h"
+#include "sysdep/sigcontext.h"
+#include "sysdep/ptrace.h"
+#include "os.h"
+#ifdef CONFIG_MODE_SKAS
+#include "skas.h"
+#endif
+#include "os.h"
+
+/* Note this is constrained to return 0, -EFAULT, -EACCESS, -ENOMEM by segv(). */
+int handle_page_fault(unsigned long address, unsigned long ip,
+ int is_write, int is_user, int *code_out)
+{
+ struct mm_struct *mm = current->mm;
+ struct vm_area_struct *vma;
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte;
+ int err = -EFAULT;
+
+ *code_out = SEGV_MAPERR;
+
+ /* If the fault was during atomic operation, don't take the fault, just
+ * fail. */
+ if (in_atomic())
+ goto out_nosemaphore;
+
+ down_read(&mm->mmap_sem);
+ vma = find_vma(mm, address);
+ if(!vma)
+ goto out;
+ else if(vma->vm_start <= address)
+ goto good_area;
+ else if(!(vma->vm_flags & VM_GROWSDOWN))
+ goto out;
+ else if(is_user && !ARCH_IS_STACKGROW(address))
+ goto out;
+ else if(expand_stack(vma, address))
+ goto out;
+
+good_area:
+ *code_out = SEGV_ACCERR;
+ if(is_write && !(vma->vm_flags & VM_WRITE))
+ goto out;
+
+ /* Don't require VM_READ|VM_EXEC for write faults! */
+ if(!is_write && !(vma->vm_flags & (VM_READ | VM_EXEC)))
+ goto out;
+
+ do {
+survive:
+ switch (handle_mm_fault(mm, vma, address, is_write)){
+ case VM_FAULT_MINOR:
+ current->min_flt++;
+ break;
+ case VM_FAULT_MAJOR:
+ current->maj_flt++;
+ break;
+ case VM_FAULT_SIGBUS:
+ err = -EACCES;
+ goto out;
+ case VM_FAULT_OOM:
+ err = -ENOMEM;
+ goto out_of_memory;
+ default:
+ BUG();
+ }
+ pgd = pgd_offset(mm, address);
+ pud = pud_offset(pgd, address);
+ pmd = pmd_offset(pud, address);
+ pte = pte_offset_kernel(pmd, address);
+ } while(!pte_present(*pte));
+ err = 0;
+ /* The below warning was added in place of
+ * pte_mkyoung(); if (is_write) pte_mkdirty();
+ * If it's triggered, we'd see normally a hang here (a clean pte is
+ * marked read-only to emulate the dirty bit).
+ * However, the generic code can mark a PTE writable but clean on a
+ * concurrent read fault, triggering this harmlessly. So comment it out.
+ */
+#if 0
+ WARN_ON(!pte_young(*pte) || (is_write && !pte_dirty(*pte)));
+#endif
+ flush_tlb_page(vma, address);
+out:
+ up_read(&mm->mmap_sem);
+out_nosemaphore:
+ return(err);
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+out_of_memory:
+ if (current->pid == 1) {
+ up_read(&mm->mmap_sem);
+ yield();
+ down_read(&mm->mmap_sem);
+ goto survive;
+ }
+ goto out;
+}
+
+void segv_handler(int sig, union uml_pt_regs *regs)
+{
+ struct faultinfo * fi = UPT_FAULTINFO(regs);
+
+ if(UPT_IS_USER(regs) && !SEGV_IS_FIXABLE(fi)){
+ bad_segv(*fi, UPT_IP(regs));
+ return;
+ }
+ segv(*fi, UPT_IP(regs), UPT_IS_USER(regs), regs);
+}
+
+struct kern_handlers handlinfo_kern = {
+ .relay_signal = relay_signal,
+ .winch = winch,
+ .bus_handler = relay_signal,
+ .page_fault = segv_handler,
+ .sigio_handler = sigio_handler,
+ .timer_handler = timer_handler
+};
+/*
+ * We give a *copy* of the faultinfo in the regs to segv.
+ * This must be done, since nesting SEGVs could overwrite
+ * the info in the regs. A pointer to the info then would
+ * give us bad data!
+ */
+unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, void *sc)
+{
+ struct siginfo si;
+ void *catcher;
+ int err;
+ int is_write = FAULT_WRITE(fi);
+ unsigned long address = FAULT_ADDRESS(fi);
+
+ if(!is_user && (address >= start_vm) && (address < end_vm)){
+ flush_tlb_kernel_vm();
+ return(0);
+ }
+ else if(current->mm == NULL)
+ panic("Segfault with no mm");
+
+ if (SEGV_IS_FIXABLE(&fi) || SEGV_MAYBE_FIXABLE(&fi))
+ err = handle_page_fault(address, ip, is_write, is_user, &si.si_code);
+ else {
+ err = -EFAULT;
+ /* A thread accessed NULL, we get a fault, but CR2 is invalid.
+ * This code is used in __do_copy_from_user() of TT mode. */
+ address = 0;
+ }
+
+ catcher = current->thread.fault_catcher;
+ if(!err)
+ return(0);
+ else if(catcher != NULL){
+ current->thread.fault_addr = (void *) address;
+ do_longjmp(catcher, 1);
+ }
+ else if(current->thread.fault_addr != NULL)
+ panic("fault_addr set but no fault catcher");
+ else if(!is_user && arch_fixup(ip, sc))
+ return(0);
+
+ if(!is_user)
+ panic("Kernel mode fault at addr 0x%lx, ip 0x%lx",
+ address, ip);
+
+ if (err == -EACCES) {
+ si.si_signo = SIGBUS;
+ si.si_errno = 0;
+ si.si_code = BUS_ADRERR;
+ si.si_addr = (void __user *)address;
+ current->thread.arch.faultinfo = fi;
+ force_sig_info(SIGBUS, &si, current);
+ } else if (err == -ENOMEM) {
+ printk("VM: killing process %s\n", current->comm);
+ do_exit(SIGKILL);
+ } else {
+ BUG_ON(err != -EFAULT);
+ si.si_signo = SIGSEGV;
+ si.si_addr = (void __user *) address;
+ current->thread.arch.faultinfo = fi;
+ force_sig_info(SIGSEGV, &si, current);
+ }
+ return(0);
+}
+
+void bad_segv(struct faultinfo fi, unsigned long ip)
+{
+ struct siginfo si;
+
+ si.si_signo = SIGSEGV;
+ si.si_code = SEGV_ACCERR;
+ si.si_addr = (void __user *) FAULT_ADDRESS(fi);
+ current->thread.arch.faultinfo = fi;
+ force_sig_info(SIGSEGV, &si, current);
+}
+
+void relay_signal(int sig, union uml_pt_regs *regs)
+{
+ if(arch_handle_signal(sig, regs)) return;
+ if(!UPT_IS_USER(regs))
+ panic("Kernel mode signal %d", sig);
+ current->thread.arch.faultinfo = *UPT_FAULTINFO(regs);
+ force_sig(sig, current);
+}
+
+void bus_handler(int sig, union uml_pt_regs *regs)
+{
+ if(current->thread.fault_catcher != NULL)
+ do_longjmp(current->thread.fault_catcher, 1);
+ else relay_signal(sig, regs);
+}
+
+void winch(int sig, union uml_pt_regs *regs)
+{
+ do_IRQ(WINCH_IRQ, regs);
+}
+
+void trap_init(void)
+{
+}
+++ /dev/null
-/*
- * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#include "linux/kernel.h"
-#include "asm/errno.h"
-#include "linux/sched.h"
-#include "linux/mm.h"
-#include "linux/spinlock.h"
-#include "linux/config.h"
-#include "linux/init.h"
-#include "linux/ptrace.h"
-#include "asm/semaphore.h"
-#include "asm/pgtable.h"
-#include "asm/pgalloc.h"
-#include "asm/tlbflush.h"
-#include "asm/a.out.h"
-#include "asm/current.h"
-#include "asm/irq.h"
-#include "sysdep/sigcontext.h"
-#include "user_util.h"
-#include "kern_util.h"
-#include "kern.h"
-#include "chan_kern.h"
-#include "mconsole_kern.h"
-#include "mem.h"
-#include "mem_kern.h"
-#include "sysdep/sigcontext.h"
-#include "sysdep/ptrace.h"
-#include "os.h"
-#ifdef CONFIG_MODE_SKAS
-#include "skas.h"
-#endif
-#include "os.h"
-
-/* Note this is constrained to return 0, -EFAULT, -EACCESS, -ENOMEM by segv(). */
-int handle_page_fault(unsigned long address, unsigned long ip,
- int is_write, int is_user, int *code_out)
-{
- struct mm_struct *mm = current->mm;
- struct vm_area_struct *vma;
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte;
- int err = -EFAULT;
-
- *code_out = SEGV_MAPERR;
-
- /* If the fault was during atomic operation, don't take the fault, just
- * fail. */
- if (in_atomic())
- goto out_nosemaphore;
-
- down_read(&mm->mmap_sem);
- vma = find_vma(mm, address);
- if(!vma)
- goto out;
- else if(vma->vm_start <= address)
- goto good_area;
- else if(!(vma->vm_flags & VM_GROWSDOWN))
- goto out;
- else if(is_user && !ARCH_IS_STACKGROW(address))
- goto out;
- else if(expand_stack(vma, address))
- goto out;
-
-good_area:
- *code_out = SEGV_ACCERR;
- if(is_write && !(vma->vm_flags & VM_WRITE))
- goto out;
-
- /* Don't require VM_READ|VM_EXEC for write faults! */
- if(!is_write && !(vma->vm_flags & (VM_READ | VM_EXEC)))
- goto out;
-
- do {
-survive:
- switch (handle_mm_fault(mm, vma, address, is_write)){
- case VM_FAULT_MINOR:
- current->min_flt++;
- break;
- case VM_FAULT_MAJOR:
- current->maj_flt++;
- break;
- case VM_FAULT_SIGBUS:
- err = -EACCES;
- goto out;
- case VM_FAULT_OOM:
- err = -ENOMEM;
- goto out_of_memory;
- default:
- BUG();
- }
- pgd = pgd_offset(mm, address);
- pud = pud_offset(pgd, address);
- pmd = pmd_offset(pud, address);
- pte = pte_offset_kernel(pmd, address);
- } while(!pte_present(*pte));
- err = 0;
- /* The below warning was added in place of
- * pte_mkyoung(); if (is_write) pte_mkdirty();
- * If it's triggered, we'd see normally a hang here (a clean pte is
- * marked read-only to emulate the dirty bit).
- * However, the generic code can mark a PTE writable but clean on a
- * concurrent read fault, triggering this harmlessly. So comment it out.
- */
-#if 0
- WARN_ON(!pte_young(*pte) || (is_write && !pte_dirty(*pte)));
-#endif
- flush_tlb_page(vma, address);
-out:
- up_read(&mm->mmap_sem);
-out_nosemaphore:
- return(err);
-
-/*
- * We ran out of memory, or some other thing happened to us that made
- * us unable to handle the page fault gracefully.
- */
-out_of_memory:
- if (current->pid == 1) {
- up_read(&mm->mmap_sem);
- yield();
- down_read(&mm->mmap_sem);
- goto survive;
- }
- goto out;
-}
-
-void segv_handler(int sig, union uml_pt_regs *regs)
-{
- struct faultinfo * fi = UPT_FAULTINFO(regs);
-
- if(UPT_IS_USER(regs) && !SEGV_IS_FIXABLE(fi)){
- bad_segv(*fi, UPT_IP(regs));
- return;
- }
- segv(*fi, UPT_IP(regs), UPT_IS_USER(regs), regs);
-}
-
-struct kern_handlers handlinfo_kern = {
- .relay_signal = relay_signal,
- .winch = winch,
- .bus_handler = relay_signal,
- .page_fault = segv_handler,
- .sigio_handler = sigio_handler,
- .timer_handler = timer_handler
-};
-/*
- * We give a *copy* of the faultinfo in the regs to segv.
- * This must be done, since nesting SEGVs could overwrite
- * the info in the regs. A pointer to the info then would
- * give us bad data!
- */
-unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, void *sc)
-{
- struct siginfo si;
- void *catcher;
- int err;
- int is_write = FAULT_WRITE(fi);
- unsigned long address = FAULT_ADDRESS(fi);
-
- if(!is_user && (address >= start_vm) && (address < end_vm)){
- flush_tlb_kernel_vm();
- return(0);
- }
- else if(current->mm == NULL)
- panic("Segfault with no mm");
-
- if (SEGV_IS_FIXABLE(&fi) || SEGV_MAYBE_FIXABLE(&fi))
- err = handle_page_fault(address, ip, is_write, is_user, &si.si_code);
- else {
- err = -EFAULT;
- /* A thread accessed NULL, we get a fault, but CR2 is invalid.
- * This code is used in __do_copy_from_user() of TT mode. */
- address = 0;
- }
-
- catcher = current->thread.fault_catcher;
- if(!err)
- return(0);
- else if(catcher != NULL){
- current->thread.fault_addr = (void *) address;
- do_longjmp(catcher, 1);
- }
- else if(current->thread.fault_addr != NULL)
- panic("fault_addr set but no fault catcher");
- else if(!is_user && arch_fixup(ip, sc))
- return(0);
-
- if(!is_user)
- panic("Kernel mode fault at addr 0x%lx, ip 0x%lx",
- address, ip);
-
- if (err == -EACCES) {
- si.si_signo = SIGBUS;
- si.si_errno = 0;
- si.si_code = BUS_ADRERR;
- si.si_addr = (void __user *)address;
- current->thread.arch.faultinfo = fi;
- force_sig_info(SIGBUS, &si, current);
- } else if (err == -ENOMEM) {
- printk("VM: killing process %s\n", current->comm);
- do_exit(SIGKILL);
- } else {
- BUG_ON(err != -EFAULT);
- si.si_signo = SIGSEGV;
- si.si_addr = (void __user *) address;
- current->thread.arch.faultinfo = fi;
- force_sig_info(SIGSEGV, &si, current);
- }
- return(0);
-}
-
-void bad_segv(struct faultinfo fi, unsigned long ip)
-{
- struct siginfo si;
-
- si.si_signo = SIGSEGV;
- si.si_code = SEGV_ACCERR;
- si.si_addr = (void __user *) FAULT_ADDRESS(fi);
- current->thread.arch.faultinfo = fi;
- force_sig_info(SIGSEGV, &si, current);
-}
-
-void relay_signal(int sig, union uml_pt_regs *regs)
-{
- if(arch_handle_signal(sig, regs)) return;
- if(!UPT_IS_USER(regs))
- panic("Kernel mode signal %d", sig);
- current->thread.arch.faultinfo = *UPT_FAULTINFO(regs);
- force_sig(sig, current);
-}
-
-void bus_handler(int sig, union uml_pt_regs *regs)
-{
- if(current->thread.fault_catcher != NULL)
- do_longjmp(current->thread.fault_catcher, 1);
- else relay_signal(sig, regs);
-}
-
-void winch(int sig, union uml_pt_regs *regs)
-{
- do_IRQ(WINCH_IRQ, regs);
-}
-
-void trap_init(void)
-{
-}
static int exec_tramp(void *sig_stack)
{
init_new_thread_stack(sig_stack, NULL);
- init_new_thread_signals(1);
+ init_new_thread_signals();
os_stop_process(os_getpid());
return(0);
}
#define SIZE ((CONFIG_NEST_LEVEL + CONFIG_KERNEL_HALF_GIGS) * 0x20000000)
#define START (CONFIG_TOP_ADDR - SIZE)
-unsigned long set_task_sizes_tt(int arg, unsigned long *host_size_out,
- unsigned long *task_size_out)
+unsigned long set_task_sizes_tt(unsigned long *task_size_out)
{
+ unsigned long host_task_size;
+
/* Round up to the nearest 4M */
- *host_size_out = ROUND_4M((unsigned long) &arg);
+ host_task_size = ROUND_4M((unsigned long) &host_task_size);
*task_size_out = START;
- return(START);
-}
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+ return host_task_size;
+}
schedule_tail(current->thread.prev_sched);
current->thread.prev_sched = NULL;
- init_new_thread_signals(1);
+ init_new_thread_signals();
enable_timer();
free_page(current->thread.temp_stack);
set_cmdline("(kernel thread)");
void *sc;
long result;
int syscall;
-#ifdef CONFIG_SYSCALL_DEBUG
- int index;
-#endif
+
sc = UPT_SC(®s->regs);
SC_START_SYSCALL(sc);
syscall = UPT_SYSCALL_NR(®s->regs);
-
-#ifdef CONFIG_SYSCALL_DEBUG
- index = record_syscall_start(syscall);
-#endif
-
syscall_trace(®s->regs, 0);
current->thread.nsyscalls++;
SC_SET_SYSCALL_RETURN(sc, result);
syscall_trace(®s->regs, 1);
-#ifdef CONFIG_SYSCALL_DEBUG
- record_syscall_end(index, result);
-#endif
}
int status, pid = 0, sig = 0, cont_type, tracing = 0, op = 0;
int proc_id = 0, n, err, old_tracing = 0, strace = 0;
int local_using_sysemu = 0;
-#ifdef UML_CONFIG_SYSCALL_DEBUG
- unsigned long eip = 0;
- int last_index;
-#endif
+
signal(SIGPIPE, SIG_IGN);
setup_tracer_winch();
tracing_pid = os_getpid();
else if(WIFSTOPPED(status)){
proc_id = pid_to_processor_id(pid);
sig = WSTOPSIG(status);
-#ifdef UML_CONFIG_SYSCALL_DEBUG
- if(signal_index[proc_id] == 1024){
- signal_index[proc_id] = 0;
- last_index = 1023;
- }
- else last_index = signal_index[proc_id] - 1;
- if(((sig == SIGPROF) || (sig == SIGVTALRM) ||
- (sig == SIGALRM)) &&
- (signal_record[proc_id][last_index].signal == sig)&&
- (signal_record[proc_id][last_index].pid == pid))
- signal_index[proc_id] = last_index;
- signal_record[proc_id][signal_index[proc_id]].pid = pid;
- gettimeofday(&signal_record[proc_id][signal_index[proc_id]].time, NULL);
- eip = ptrace(PTRACE_PEEKUSR, pid, PT_IP_OFFSET, 0);
- signal_record[proc_id][signal_index[proc_id]].addr = eip;
- signal_record[proc_id][signal_index[proc_id]++].signal = sig;
-#endif
if(proc_id == -1){
sleeping_process_signal(pid, sig);
continue;
#define MIN_VMALLOC (32 * 1024 * 1024)
+extern char __binary_start;
+
int linux_main(int argc, char **argv)
{
unsigned long avail, diff;
printf("UML running in %s mode\n", mode);
- uml_start = CHOOSE_MODE_PROC(set_task_sizes_tt, set_task_sizes_skas, 0,
- &host_task_size, &task_size);
+ uml_start = (unsigned long) &__binary_start;
+ host_task_size = CHOOSE_MODE_PROC(set_task_sizes_tt,
+ set_task_sizes_skas, &task_size);
/*
* Setting up handlers to 'sig_info' struct
physmem_size += UML_ROUND_UP(brk_start) - UML_ROUND_UP(&_end);
}
- uml_physmem = uml_start;
+ uml_physmem = uml_start & PAGE_MASK;
/* Reserve up to 4M after the current brk */
uml_reserved = ROUND_4M(brk_start) + (1 << 22);
SECTIONS
{
- /*This must contain the right address - not quite the default ELF one.*/
+ /* This must contain the right address - not quite the default ELF one.*/
PROVIDE (__executable_start = START);
- . = START + SIZEOF_HEADERS;
+ /* Static binaries stick stuff here, like the sigreturn trampoline,
+ * invisibly to objdump. So, just make __binary_start equal to the very
+ * beginning of the executable, and if there are unmapped pages after this,
+ * they are forever unusable.
+ */
+ __binary_start = START;
- /* Used in arch/um/kernel/mem.c. Any memory between START and __binary_start
- * is remapped.*/
- __binary_start = .;
+ . = START + SIZEOF_HEADERS;
#ifdef MODE_TT
.remap_data : { UNMAP_PATH (.data .bss) }
-/* in case the preprocessor is a 32bit one */
-#undef i386
#ifdef CONFIG_LD_SCRIPT_STATIC
#include "uml.lds.S"
#else
-/*
+/*
* Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
#include "os.h"
#include "user.h"
#include "kern_util.h"
+#include "user_util.h"
static void copy_stat(struct uml_stat *dst, struct stat64 *src)
{
struct stat64 sbuf;
int err;
- do {
- err = fstat64(fd, &sbuf);
- } while((err < 0) && (errno == EINTR)) ;
-
+ CATCH_EINTR(err = fstat64(fd, &sbuf));
if(err < 0)
- return(-errno);
+ return -errno;
if(ubuf != NULL)
copy_stat(ubuf, &sbuf);
- return(err);
+ return err;
}
int os_stat_file(const char *file_name, struct uml_stat *ubuf)
} while((err < 0) && (errno == EINTR)) ;
if(err < 0)
- return(-errno);
+ return -errno;
if(ubuf != NULL)
copy_stat(ubuf, &sbuf);
- return(err);
+ return err;
}
int os_access(const char* file, int mode)
err = access(file, amode);
if(err < 0)
- return(-errno);
+ return -errno;
- return(0);
+ return 0;
}
void os_print_error(int error, const char* str)
err = ioctl(fd, cmd, arg);
if(err < 0)
- return(-errno);
+ return -errno;
- return(err);
+ return err;
}
int os_window_size(int fd, int *rows, int *cols)
struct winsize size;
if(ioctl(fd, TIOCGWINSZ, &size) < 0)
- return(-errno);
+ return -errno;
*rows = size.ws_row;
*cols = size.ws_col;
- return(0);
+ return 0;
}
int os_new_tty_pgrp(int fd, int pid)
if(tcsetpgrp(fd, pid) < 0)
return -errno;
- return(0);
+ return 0;
}
/* FIXME: ensure namebuf in os_get_if_name is big enough */
int os_get_ifname(int fd, char* namebuf)
{
if(ioctl(fd, SIOCGIFNAME, namebuf) < 0)
- return(-errno);
+ return -errno;
- return(0);
+ return 0;
}
int os_set_slip(int fd)
if(ioctl(fd, SIOCSIFENCAP, &sencap) < 0)
return -errno;
- return(0);
+ return 0;
}
int os_set_owner(int fd, int pid)
int save_errno = errno;
if(fcntl(fd, F_GETOWN, 0) != pid)
- return(-save_errno);
+ return -save_errno;
}
- return(0);
+ return 0;
}
/* FIXME? moved wholesale from sigio_user.c to get fcntls out of that file */
} while((err < 0) && (errno==EINTR)) ;
if(err < 0)
- return(-errno);
+ return -errno;
- return(0);
+ return 0;
}
int os_file_type(char *file)
err = os_stat_file(file, &buf);
if(err < 0)
- return(err);
+ return err;
- if(S_ISDIR(buf.ust_mode)) return(OS_TYPE_DIR);
- else if(S_ISLNK(buf.ust_mode)) return(OS_TYPE_SYMLINK);
- else if(S_ISCHR(buf.ust_mode)) return(OS_TYPE_CHARDEV);
- else if(S_ISBLK(buf.ust_mode)) return(OS_TYPE_BLOCKDEV);
- else if(S_ISFIFO(buf.ust_mode)) return(OS_TYPE_FIFO);
- else if(S_ISSOCK(buf.ust_mode)) return(OS_TYPE_SOCK);
- else return(OS_TYPE_FILE);
+ if(S_ISDIR(buf.ust_mode))
+ return OS_TYPE_DIR;
+ else if(S_ISLNK(buf.ust_mode))
+ return OS_TYPE_SYMLINK;
+ else if(S_ISCHR(buf.ust_mode))
+ return OS_TYPE_CHARDEV;
+ else if(S_ISBLK(buf.ust_mode))
+ return OS_TYPE_BLOCKDEV;
+ else if(S_ISFIFO(buf.ust_mode))
+ return OS_TYPE_FIFO;
+ else if(S_ISSOCK(buf.ust_mode))
+ return OS_TYPE_SOCK;
+ else return OS_TYPE_FILE;
}
int os_file_mode(char *file, struct openflags *mode_out)
actual = lseek64(fd, offset, SEEK_SET);
if(actual != offset)
- return(-errno);
- return(0);
+ return -errno;
+ return 0;
}
static int fault_buffer(void *start, int len,
for(i = 0; i < len; i += page){
if((*copy_proc)(start + i, &c, sizeof(c)))
- return(-EFAULT);
+ return -EFAULT;
}
if((len % page) != 0){
if((*copy_proc)(start + len - 1, &c, sizeof(c)))
- return(-EFAULT);
+ return -EFAULT;
}
- return(0);
+ return 0;
}
static int file_io(int fd, void *buf, int len,
if((n < 0) && (errno == EFAULT)){
err = fault_buffer(buf, len, copy_user_proc);
if(err)
- return(err);
+ return err;
n = (*io_proc)(fd, buf, len);
}
} while((n < 0) && (errno == EINTR));
if(n < 0)
- return(-errno);
- return(n);
+ return -errno;
+ return n;
}
int os_read_file(int fd, void *buf, int len)
{
- return(file_io(fd, buf, len, (int (*)(int, void *, int)) read,
- copy_from_user_proc));
+ return file_io(fd, buf, len, (int (*)(int, void *, int)) read,
+ copy_from_user_proc);
}
int os_write_file(int fd, const void *buf, int len)
{
- return(file_io(fd, (void *) buf, len,
- (int (*)(int, void *, int)) write, copy_to_user_proc));
+ return file_io(fd, (void *) buf, len,
+ (int (*)(int, void *, int)) write, copy_to_user_proc);
}
int os_file_size(char *file, unsigned long long *size_out)
err = os_stat_file(file, &buf);
if(err < 0){
printk("Couldn't stat \"%s\" : err = %d\n", file, -err);
- return(err);
+ return err;
}
*modtime = buf.ust_mtime;
- return(0);
+ return 0;
}
int os_get_exec_close(int fd, int* close_on_exec)
if(err < 0)
goto error;
- return(0);
+ return 0;
error:
printk("os_pipe : Setting FD_CLOEXEC failed, err = %d\n", -err);
(fcntl(fd, F_SETOWN, owner) < 0)){
err = -errno;
printk("os_set_fd_async : Failed to fcntl F_SETOWN "
- "(or F_SETSIG) fd %d to pid %d, errno = %d\n", fd,
+ "(or F_SETSIG) fd %d to pid %d, errno = %d\n", fd,
owner, errno);
return err;
}
- return(0);
+ return 0;
}
int os_clear_fd_async(int fd)
flags &= ~(O_ASYNC | O_NONBLOCK);
if(fcntl(fd, F_SETFL, flags) < 0)
- return(-errno);
- return(0);
+ return -errno;
+ return 0;
}
int os_set_fd_block(int fd, int blocking)
if(fcntl(fd, F_SETFL, flags) < 0)
return -errno;
- return(0);
+ return 0;
}
int os_accept_connection(int fd)
int new;
new = accept(fd, NULL, 0);
- if(new < 0)
- return(-errno);
- return(new);
+ if(new < 0)
+ return -errno;
+ return new;
}
#ifndef SHUT_RD
else if(w) what = SHUT_WR;
else {
printk("os_shutdown_socket : neither r or w was set\n");
- return(-EINVAL);
+ return -EINVAL;
}
err = shutdown(fd, what);
if(err < 0)
- return(-errno);
- return(0);
+ return -errno;
+ return 0;
}
int os_rcv_fd(int fd, int *helper_pid_out)
n = recvmsg(fd, &msg, 0);
if(n < 0)
- return(-errno);
+ return -errno;
else if(n != sizeof(iov.iov_len))
*helper_pid_out = -1;
cmsg = CMSG_FIRSTHDR(&msg);
if(cmsg == NULL){
printk("rcv_fd didn't receive anything, error = %d\n", errno);
- return(-1);
+ return -1;
}
- if((cmsg->cmsg_level != SOL_SOCKET) ||
+ if((cmsg->cmsg_level != SOL_SOCKET) ||
(cmsg->cmsg_type != SCM_RIGHTS)){
printk("rcv_fd didn't receive a descriptor\n");
- return(-1);
+ return -1;
}
new = ((int *) CMSG_DATA(cmsg))[0];
- return(new);
+ return new;
}
int os_create_unix_socket(char *file, int len, int close_on_exec)
if(err < 0)
return -errno;
- return(sock);
+ return sock;
}
void os_flush_stdout(void)
printk("F_SETLK failed, file already locked by pid %d\n", lock.l_pid);
err = save;
out:
- return(err);
+ return err;
}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
return n;
}
-int os_isatty(int fd)
-{
- return isatty(fd);
-}
-
int os_create_pollfd(int fd, int events, void *tmp_pfd, int size_tmpfds)
{
if (pollfds_num == pollfds_size) {
void init_irq_signals(int on_sigstack)
{
- __sighandler_t h;
int flags;
flags = on_sigstack ? SA_ONSTACK : 0;
- if (timer_irq_inited)
- h = (__sighandler_t)alarm_handler;
- else
- h = boot_timer_handler;
- set_handler(SIGVTALRM, h, flags | SA_RESTART,
- SIGUSR1, SIGIO, SIGWINCH, SIGALRM, -1);
+ set_handler(SIGVTALRM, (__sighandler_t) alarm_handler,
+ flags | SA_RESTART, SIGUSR1, SIGIO, SIGWINCH, SIGALRM, -1);
+ set_handler(SIGALRM, (__sighandler_t) alarm_handler,
+ flags | SA_RESTART, SIGUSR1, SIGIO, SIGWINCH, SIGALRM, -1);
set_handler(SIGIO, (__sighandler_t) sig_handler, flags | SA_RESTART,
SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1);
signal(SIGWINCH, SIG_IGN);
if(usr1_handler) set_handler(SIGUSR1, usr1_handler, flags, -1);
}
-void init_new_thread_signals(int altstack)
+void init_new_thread_signals(void)
{
- int flags = altstack ? SA_ONSTACK : 0;
-
- set_handler(SIGSEGV, (__sighandler_t) sig_handler, flags,
+ set_handler(SIGSEGV, (__sighandler_t) sig_handler, SA_ONSTACK,
SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1);
- set_handler(SIGTRAP, (__sighandler_t) sig_handler, flags,
+ set_handler(SIGTRAP, (__sighandler_t) sig_handler, SA_ONSTACK,
SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1);
- set_handler(SIGFPE, (__sighandler_t) sig_handler, flags,
+ set_handler(SIGFPE, (__sighandler_t) sig_handler, SA_ONSTACK,
SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1);
- set_handler(SIGILL, (__sighandler_t) sig_handler, flags,
+ set_handler(SIGILL, (__sighandler_t) sig_handler, SA_ONSTACK,
SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1);
- set_handler(SIGBUS, (__sighandler_t) sig_handler, flags,
+ set_handler(SIGBUS, (__sighandler_t) sig_handler, SA_ONSTACK,
SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1);
set_handler(SIGUSR2, (__sighandler_t) sig_handler,
- flags, SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1);
+ SA_ONSTACK, SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM,
+ -1);
signal(SIGHUP, SIG_IGN);
- init_irq_signals(altstack);
+ init_irq_signals(1);
}
int run_kernel_thread(int (*fn)(void *), void *arg, void **jmp_ptr)
{
jmp_buf buf;
- int n, enable;
+ int n;
*jmp_ptr = &buf;
- n = UML_SETJMP(&buf, enable);
+ n = UML_SETJMP(&buf);
if(n != 0)
- return(n);
+ return n;
(*fn)(arg);
- return(0);
+ return 0;
}
/* Protected by sigio_lock(). Used by the sigio thread, but the UML thread
* synchronizes with it.
*/
-struct pollfds current_poll = {
+static struct pollfds current_poll = {
.poll = NULL,
.size = 0,
.used = 0
};
-struct pollfds next_poll = {
+static struct pollfds next_poll = {
.poll = NULL,
.size = 0,
.used = 0
set_signals(flags);
}
-int add_sigio_fd(int fd, int read)
+static int add_sigio_fd(int fd, int read)
{
int err = 0, i, n, events;
struct pollfd *p;
int err = 0, i, n = 0;
+ /* This is called from exitcalls elsewhere in UML - if
+ * sigio_cleanup has already run, then update_thread will hang
+ * or fail because the thread is no longer running.
+ */
+ if(write_sigio_pid == -1)
+ return -EIO;
+
sigio_lock();
for(i = 0; i < current_poll.used; i++){
if(current_poll.poll[i].fd == fd) break;
update_thread();
out:
sigio_unlock();
- return(err);
+ return err;
}
static struct pollfd *setup_initial_poll(int fd)
return p;
}
-void write_sigio_workaround(void)
+static void write_sigio_workaround(void)
{
unsigned long stack;
struct pollfd *p;
close(l_write_sigio_fds[1]);
}
-void sigio_cleanup(void)
+void maybe_sigio_broken(int fd, int read)
+{
+ if(!isatty(fd))
+ return;
+
+ if((read || pty_output_sigio) && (!read || pty_close_sigio))
+ return;
+
+ write_sigio_workaround();
+ add_sigio_fd(fd, read);
+}
+
+static void sigio_cleanup(void)
{
if(write_sigio_pid != -1){
os_kill_process(write_sigio_pid, 1);
write_sigio_pid = -1;
}
}
+
+__uml_exitcall(sigio_cleanup);
set_signals(enabled);
}
-extern void do_boot_timer_handler(struct sigcontext * sc);
-
-void boot_timer_handler(ARCH_SIGHDLR_PARAM)
-{
- struct sigcontext *sc;
- int enabled;
-
- ARCH_GET_SIGCONTEXT(sc, sig);
-
- enabled = signals_enabled;
- if(!enabled){
- if(sig == SIGVTALRM)
- pending |= SIGVTALRM_MASK;
- else pending |= SIGALRM_MASK;
- return;
- }
-
- block_signals();
-
- do_boot_timer_handler(sc);
- set_signals(enabled);
-}
-
void set_sigstack(void *sig_stack, int size)
{
stack_t stack = ((stack_t) { .ss_flags = 0,
ptrace(PTRACE_TRACEME, 0, 0, 0);
- init_new_thread_signals(1);
+ init_new_thread_signals();
enable_timer();
if(!proc_mm){
{
unsigned long flags;
jmp_buf switch_buf, fork_buf;
- int enable;
*switch_buf_ptr = &switch_buf;
*fork_buf_ptr = &fork_buf;
*/
flags = get_signals();
block_signals();
- if(UML_SETJMP(&fork_buf, enable) == 0)
+ if(UML_SETJMP(&fork_buf) == 0)
new_thread_proc(stack, handler);
remove_sigstack();
void thread_wait(void *sw, void *fb)
{
jmp_buf buf, **switch_buf = sw, *fork_buf;
- int enable;
*switch_buf = &buf;
fork_buf = fb;
- if(UML_SETJMP(&buf, enable) == 0)
+ if(UML_SETJMP(&buf) == 0)
siglongjmp(*fork_buf, INIT_JMP_REMOVE_SIGSTACK);
}
void switch_threads(void *me, void *next)
{
jmp_buf my_buf, **me_ptr = me, *next_buf = next;
- int enable;
*me_ptr = &my_buf;
- if(UML_SETJMP(&my_buf, enable) == 0)
+ if(UML_SETJMP(&my_buf) == 0)
UML_LONGJMP(next_buf, 1);
}
int start_idle_thread(void *stack, void *switch_buf_ptr, void **fork_buf_ptr)
{
jmp_buf **switch_buf = switch_buf_ptr;
- int n, enable;
+ int n;
set_handler(SIGWINCH, (__sighandler_t) sig_handler,
SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGALRM,
SIGVTALRM, -1);
*fork_buf_ptr = &initial_jmpbuf;
- n = UML_SETJMP(&initial_jmpbuf, enable);
+ n = UML_SETJMP(&initial_jmpbuf);
switch(n){
case INIT_JMP_NEW_THREAD:
new_thread_proc((void *) stack, new_thread_handler);
void initial_thread_cb_skas(void (*proc)(void *), void *arg)
{
jmp_buf here;
- int enable;
cb_proc = proc;
cb_arg = arg;
cb_back = &here;
block_signals();
- if(UML_SETJMP(&here, enable) == 0)
+ if(UML_SETJMP(&here) == 0)
UML_LONGJMP(&initial_jmpbuf, INIT_JMP_CALLBACK);
unblock_signals();
#include "kern_constants.h"
#include "os.h"
-/* XXX This really needs to be declared and initialized in a kernel file since
- * it's in <linux/time.h>
- */
-extern struct timespec wall_to_monotonic;
-
static void set_interval(int timer_type)
{
int usec = 1000000/hz();
errno);
}
+#ifdef UML_CONFIG_MODE_TT
void uml_idle_timer(void)
{
if(signal(SIGVTALRM, SIG_IGN) == SIG_ERR)
SA_RESTART, SIGUSR1, SIGIO, SIGWINCH, SIGVTALRM, -1);
set_interval(ITIMER_REAL);
}
-
-void time_init(void)
-{
- if(signal(SIGVTALRM, boot_timer_handler) == SIG_ERR)
- panic("Couldn't set SIGVTALRM handler");
- set_interval(ITIMER_VIRTUAL);
- time_init_kern();
-}
+#endif
unsigned long long os_nsecs(void)
{
nanosleep(&ts, NULL);
}
-/* XXX This partly duplicates init_irq_signals */
-
void user_time_init(void)
{
- set_handler(SIGVTALRM, (__sighandler_t) alarm_handler,
- SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGWINCH,
- SIGALRM, SIGUSR2, -1);
- set_handler(SIGALRM, (__sighandler_t) alarm_handler,
- SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGWINCH,
- SIGVTALRM, SIGUSR2, -1);
set_interval(ITIMER_VIRTUAL);
}
int n), int *faulted_out)
{
unsigned long *faddrp = (unsigned long *) fault_addr, ret;
- int enable;
jmp_buf jbuf;
*fault_catcher = &jbuf;
- if(UML_SETJMP(&jbuf, enable) == 0){
+ if(UML_SETJMP(&jbuf) == 0){
(*op)(to, from, n);
ret = 0;
*faulted_out = 0;
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-git6
-# Sat Jun 24 00:52:28 2006
+# Linux kernel version: 2.6.17-git22
+# Tue Jul 4 14:24:40 2006
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_OUT_OF_LINE_PFN_TO_PAGE=y
CONFIG_NR_CPUS=32
CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_IOMMU=y
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=y
+# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
-CONFIG_ACPI_HOTPLUG_MEMORY=y
+# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_INTEL=y
+CONFIG_HW_RANDOM_AMD=y
+# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
+# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
-CONFIG_VIDEO_SELECT=y
#
# Console display driver support
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
+CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
#
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_DEBUG_STACK_USAGE is not set
#
# Security options
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
#define user user32
#define __ASM_X86_64_ELF_H 1
-#define elf_read_implies_exec(ex, have_pt_gnu_stack) (!(have_pt_gnu_stack))
+#define elf_read_implies_exec(ex, executable_stack) (executable_stack != EXSTACK_DISABLE_X)
//#include <asm/ia32.h>
#include <linux/elf.h>
{
int ret;
compat_siginfo_t *si32 = (compat_siginfo_t *)compat_ptr(data);
+ siginfo_t ssi;
siginfo_t *si = compat_alloc_user_space(sizeof(siginfo_t));
if (request == PTRACE_SETSIGINFO) {
- ret = copy_siginfo_from_user32(si, si32);
+ memset(&ssi, 0, sizeof(siginfo_t));
+ ret = copy_siginfo_from_user32(&ssi, si32);
if (ret)
return ret;
+ if (copy_to_user(si, &ssi, sizeof(siginfo_t)))
+ return -EFAULT;
}
ret = sys_ptrace(request, pid, addr, (unsigned long)si);
if (ret)
return ret;
- if (request == PTRACE_GETSIGINFO)
- ret = copy_siginfo_to_user32(si32, si);
+ if (request == PTRACE_GETSIGINFO) {
+ if (copy_from_user(&ssi, si, sizeof(siginfo_t)))
+ return -EFAULT;
+ ret = copy_siginfo_to_user32(si32, &ssi);
+ }
return ret;
}
#include <linux/kexec.h>
#include <linux/module.h>
+#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/e820.h>
#include <asm/proto.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/string.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/fcntl.h>
/* sibling symlink */
if (shared_bank[bank] && b->blocks->cpu != cpu) {
sysfs_remove_link(&per_cpu(device_mce, cpu).kobj, name);
- per_cpu(threshold_banks, i)[bank] = NULL;
+ per_cpu(threshold_banks, cpu)[bank] = NULL;
return;
}
/*
* Derived from arch/powerpc/kernel/iommu.c
*
- * Copyright (C) 2006 Jon Mason <jdmason@us.ibm.com>, IBM Corporation
- * Copyright (C) 2006 Muli Ben-Yehuda <muli@il.ibm.com>, IBM Corporation
+ * Copyright (C) IBM Corporation, 2006
*
+ * Author: Jon Mason <jdmason@us.ibm.com>
+ * Author: Muli Ben-Yehuda <muli@il.ibm.com>
+
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
#include <linux/slab.h>
#include <linux/user.h>
#include <linux/a.out.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/init.h>
unsigned long start_rip;
struct create_idle c_idle = {
.cpu = cpu,
- .done = COMPLETION_INITIALIZER(c_idle.done),
+ .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
};
DECLARE_WORK(work, do_fork_idle, &c_idle);
- lockdep_set_class(&c_idle.done.wait.lock, &waitqueue_lock_key);
-
/* allocate memory for gdts of secondary cpus. Hotplug is considered */
if (!cpu_gdt_descr[cpu].address &&
!(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) {
/*
* Derived from arch/powerpc/platforms/pseries/iommu.c
*
- * Copyright (C) 2006 Jon Mason <jdmason@us.ibm.com>, IBM Corporation
- * Copyright (C) 2006 Muli Ben-Yehuda <muli@il.ibm.com>, IBM Corporation
+ * Copyright (C) IBM Corporation, 2006
+ *
+ * Author: Jon Mason <jdmason@us.ibm.com>
+ * Author: Muli Ben-Yehuda <muli@il.ibm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
vmalloc_sync_all();
return atomic_notifier_chain_register(&die_chain, nb);
}
-EXPORT_SYMBOL(register_die_notifier);
+EXPORT_SYMBOL(register_die_notifier); /* used modular by kdb */
int unregister_die_notifier(struct notifier_block *nb)
{
return atomic_notifier_chain_unregister(&die_chain, nb);
}
-EXPORT_SYMBOL(unregister_die_notifier);
+EXPORT_SYMBOL(unregister_die_notifier); /* used modular by kdb */
static inline void conditional_sti(struct pt_regs *regs)
{
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/bootmem.h>
#include <linux/kernel.h>
/*
* Bio action bits of interest
*/
-static u32 bio_act[3] __read_mostly = { 0, BLK_TC_ACT(BLK_TC_BARRIER), BLK_TC_ACT(BLK_TC_SYNC) };
+static u32 bio_act[5] __read_mostly = { 0, BLK_TC_ACT(BLK_TC_BARRIER), BLK_TC_ACT(BLK_TC_SYNC), 0, BLK_TC_ACT(BLK_TC_AHEAD) };
/*
* More could be added as needed, taking care to increment the decrementer
(((rw) & (1 << BIO_RW_BARRIER)) >> (BIO_RW_BARRIER - 0))
#define trace_sync_bit(rw) \
(((rw) & (1 << BIO_RW_SYNC)) >> (BIO_RW_SYNC - 1))
+#define trace_ahead_bit(rw) \
+ (((rw) & (1 << BIO_RW_AHEAD)) << (BIO_RW_AHEAD - 0))
/*
* The worker for the various blk_add_trace*() types. Fills out a
what |= ddir_act[rw & WRITE];
what |= bio_act[trace_barrier_bit(rw)];
what |= bio_act[trace_sync_bit(rw)];
+ what |= bio_act[trace_ahead_bit(rw)];
pid = tsk->pid;
if (unlikely(act_log_check(bt, what, sector, pid)))
bdevp = bdget_disk(disk, part);
if (!bdevp)
return -ENOMEM;
- mutex_lock(&bdevp->bd_mutex);
+ mutex_lock_nested(&bdevp->bd_mutex, BD_MUTEX_PARTITION);
if (bdevp->bd_openers) {
mutex_unlock(&bdevp->bd_mutex);
bdput(bdevp);
fsync_bdev(bdevp);
invalidate_bdev(bdevp, 0);
- mutex_lock(&bdev->bd_mutex);
+ mutex_lock_nested(&bdev->bd_mutex, BD_MUTEX_WHOLE);
delete_partition(disk, part);
mutex_unlock(&bdev->bd_mutex);
mutex_unlock(&bdevp->bd_mutex);
void blk_rq_bio_prep(request_queue_t *q, struct request *rq, struct bio *bio)
{
- /* first three bits are identical in rq->flags and bio->bi_rw */
- rq->flags |= (bio->bi_rw & 7);
+ /* first two bits are identical in rq->flags and bio->bi_rw */
+ rq->flags |= (bio->bi_rw & 3);
rq->nr_phys_segments = bio_phys_segments(q, bio);
rq->nr_hw_segments = bio_hw_segments(q, bio);
config ACPI_VIDEO
tristate "Video"
depends on X86
- default y
help
This driver implement the ACPI Extensions For Display Adapters
for integrated graphics devices on motherboard, as specified in
config ACPI_DOCK
tristate "Dock"
- depends on !ACPI_IBM_DOCK
- default y
+ depends on EXPERIMENTAL
help
This driver adds support for ACPI controlled docking stations
config ACPI_IBM_DOCK
bool "Legacy Docking Station Support"
depends on ACPI_IBM
+ depends on ACPI_DOCK=n
default n
---help---
Allows the ibm_acpi driver to handle docking station events.
tristate "Smart Battery System (EXPERIMENTAL)"
depends on X86 && I2C
depends on EXPERIMENTAL
- default y
help
This driver adds support for the Smart Battery System.
Depends on I2C (Device Drivers ---> I2C support)
unsigned long state;
};
-static struct file_operations acpi_ac_fops = {
+static const struct file_operations acpi_ac_fops = {
.open = acpi_ac_open_fs,
.read = seq_read,
.llseek = seq_lseek,
return single_open(file, acpi_battery_read_alarm, PDE(inode)->data);
}
-static struct file_operations acpi_battery_info_ops = {
+static const struct file_operations acpi_battery_info_ops = {
.open = acpi_battery_info_open_fs,
.read = seq_read,
.llseek = seq_lseek,
.owner = THIS_MODULE,
};
-static struct file_operations acpi_battery_state_ops = {
+static const struct file_operations acpi_battery_state_ops = {
.open = acpi_battery_state_open_fs,
.read = seq_read,
.llseek = seq_lseek,
.owner = THIS_MODULE,
};
-static struct file_operations acpi_battery_alarm_ops = {
+static const struct file_operations acpi_battery_alarm_ops = {
.open = acpi_battery_alarm_open_fs,
.read = seq_read,
.write = acpi_battery_write_alarm,
/* Make sure this is a valid target state */
if (!device->flags.power_manageable) {
- printk(KERN_DEBUG "Device `[%s]' is not power manageable",
- device->kobj.name);
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device `[%s]' is not power manageable",
+ device->kobj.name));
return -ENODEV;
}
/*
unsigned long pushed;
};
-static struct file_operations acpi_button_info_fops = {
+static const struct file_operations acpi_button_info_fops = {
.open = acpi_button_info_open_fs,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
-static struct file_operations acpi_button_state_fops = {
+static const struct file_operations acpi_button_state_fops = {
.open = acpi_button_state_open_fs,
.read = seq_read,
.llseek = seq_lseek,
static struct proc_dir_entry *acpi_ac_dir;
static struct proc_dir_entry *acpi_battery_dir;
-static struct semaphore cm_sbs_sem;
+static DEFINE_MUTEX(cm_sbs_mutex);
-static int lock_ac_dir_cnt = 0;
-static int lock_battery_dir_cnt = 0;
+static int lock_ac_dir_cnt;
+static int lock_battery_dir_cnt;
struct proc_dir_entry *acpi_lock_ac_dir(void)
{
-
- down(&cm_sbs_sem);
- if (!acpi_ac_dir) {
+ mutex_lock(&cm_sbs_mutex);
+ if (!acpi_ac_dir)
acpi_ac_dir = proc_mkdir(ACPI_AC_CLASS, acpi_root_dir);
- }
if (acpi_ac_dir) {
lock_ac_dir_cnt++;
} else {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"Cannot create %s\n", ACPI_AC_CLASS));
}
- up(&cm_sbs_sem);
+ mutex_unlock(&cm_sbs_mutex);
return acpi_ac_dir;
}
-
EXPORT_SYMBOL(acpi_lock_ac_dir);
void acpi_unlock_ac_dir(struct proc_dir_entry *acpi_ac_dir_param)
{
-
- down(&cm_sbs_sem);
- if (acpi_ac_dir_param) {
+ mutex_lock(&cm_sbs_mutex);
+ if (acpi_ac_dir_param)
lock_ac_dir_cnt--;
- }
if (lock_ac_dir_cnt == 0 && acpi_ac_dir_param && acpi_ac_dir) {
remove_proc_entry(ACPI_AC_CLASS, acpi_root_dir);
acpi_ac_dir = 0;
}
- up(&cm_sbs_sem);
+ mutex_unlock(&cm_sbs_mutex);
}
-
EXPORT_SYMBOL(acpi_unlock_ac_dir);
struct proc_dir_entry *acpi_lock_battery_dir(void)
{
-
- down(&cm_sbs_sem);
+ mutex_lock(&cm_sbs_mutex);
if (!acpi_battery_dir) {
acpi_battery_dir =
proc_mkdir(ACPI_BATTERY_CLASS, acpi_root_dir);
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"Cannot create %s\n", ACPI_BATTERY_CLASS));
}
- up(&cm_sbs_sem);
+ mutex_unlock(&cm_sbs_mutex);
return acpi_battery_dir;
}
-
EXPORT_SYMBOL(acpi_lock_battery_dir);
void acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir_param)
{
-
- down(&cm_sbs_sem);
- if (acpi_battery_dir_param) {
+ mutex_lock(&cm_sbs_mutex);
+ if (acpi_battery_dir_param)
lock_battery_dir_cnt--;
- }
if (lock_battery_dir_cnt == 0 && acpi_battery_dir_param
&& acpi_battery_dir) {
remove_proc_entry(ACPI_BATTERY_CLASS, acpi_root_dir);
acpi_battery_dir = 0;
}
- up(&cm_sbs_sem);
+ mutex_unlock(&cm_sbs_mutex);
return;
}
-
EXPORT_SYMBOL(acpi_unlock_battery_dir);
static int __init acpi_cm_sbs_init(void)
{
-
- if (acpi_disabled)
- return 0;
-
- init_MUTEX(&cm_sbs_sem);
-
return 0;
}
-
subsys_initcall(acpi_cm_sbs_init);
case ACPI_TYPE_METHOD:
- /*
- * Set the execution data width (32 or 64) based upon the
- * revision number of the parent ACPI table.
- * TBD: This is really for possible future support of integer width
- * on a per-table basis. Currently, we just use a global for the width.
- */
- if (info->table_desc->pointer->revision == 1) {
- node->flags |= ANOBJ_DATA_WIDTH_32;
- }
-
info->method_count++;
break;
union acpi_operand_object *mutex_desc;
acpi_status status;
- ACPI_FUNCTION_NAME(ds_create_method_mutex);
+ ACPI_FUNCTION_TRACE(ds_create_method_mutex);
/* Create the new mutex object */
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"****Restart [%4.4s] Op %p ReturnValueFromCallee %p\n",
- (char *)&walk_state->method_node->name,
+ acpi_ut_get_node_name(walk_state->method_node),
walk_state->method_call_op, return_desc));
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
acpi_os_release_mutex(method_desc->method.mutex->mutex.
os_mutex);
+ method_desc->method.mutex->mutex.owner_thread = NULL;
}
}
*/
method_node = walk_state->method_node;
- /* Lock namespace for possible update */
-
- status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
- if (ACPI_FAILURE(status)) {
- return_VOID;
- }
-
- /*
- * Delete any namespace entries created immediately underneath
- * the method
- */
- if (method_node && method_node->child) {
- acpi_ns_delete_namespace_subtree(method_node);
- }
-
/*
- * Delete any namespace entries created anywhere else within
+ * Delete any namespace objects created anywhere within
* the namespace by the execution of this method
*/
acpi_ns_delete_namespace_by_owner(method_desc->method.owner_id);
- status = acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
}
/* Decrement the thread count on the method */
case AML_CLASS_EXECUTE:
case AML_CLASS_CREATE:
/*
- * Most operators with arguments.
+ * Most operators with arguments (except create_xxx_field operators)
* Start a new result/operand state
*/
- if (walk_state->opcode != AML_CREATE_FIELD_OP) {
+ if (walk_state->op_info->object_type != ACPI_TYPE_BUFFER_FIELD) {
status = acpi_ds_result_stack_push(walk_state);
}
break;
INIT_LIST_HEAD(&dock_station->hotplug_devices);
spin_lock_init(&dock_station->dd_lock);
spin_lock_init(&dock_station->hp_lock);
+ ATOMIC_INIT_NOTIFIER_HEAD(&dock_notifier_list);
/* Find dependent devices */
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
return single_open(file, acpi_ec_read_info, PDE(inode)->data);
}
-static struct file_operations acpi_ec_info_ops = {
+static const struct file_operations acpi_ec_info_ops = {
.open = acpi_ec_info_open_fs,
.read = seq_read,
.llseek = seq_lseek,
return 0;
}
-static struct file_operations acpi_system_event_ops = {
+static const struct file_operations acpi_system_event_ops = {
.open = acpi_system_open_event,
.read = acpi_system_read_event,
.release = acpi_system_close_event,
}
}
- /* Call the setup handler with the deactivate notification */
+ /*
+ * If the region has been activated, call the setup handler
+ * with the deactivate notification
+ */
+ if (region_obj->region.flags & AOPOBJ_SETUP_COMPLETE) {
+ region_setup = handler_obj->address_space.setup;
+ status =
+ region_setup(region_obj,
+ ACPI_REGION_DEACTIVATE,
+ handler_obj->address_space.
+ context, region_context);
- region_setup = handler_obj->address_space.setup;
- status =
- region_setup(region_obj, ACPI_REGION_DEACTIVATE,
- handler_obj->address_space.context,
- region_context);
+ /* Init routine may fail, Just ignore errors */
- /* Init routine may fail, Just ignore errors */
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status,
+ "from region handler - deactivate, [%s]",
+ acpi_ut_get_region_name
+ (region_obj->region.
+ space_id)));
+ }
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "from region init, [%s]",
- acpi_ut_get_region_name
- (region_obj->region.space_id)));
+ region_obj->region.flags &=
+ ~(AOPOBJ_SETUP_COMPLETE);
}
- region_obj->region.flags &= ~(AOPOBJ_SETUP_COMPLETE);
-
/*
* Remove handler reference in the region
*
- * NOTE: this doesn't mean that the region goes away
- * The region is just inaccessible as indicated to
- * the _REG method
+ * NOTE: this doesn't mean that the region goes away, the region
+ * is just inaccessible as indicated to the _REG method
*
- * If the region is on the handler's list
- * this better be the region's handler
+ * If the region is on the handler's list, this must be the
+ * region's handler
*/
region_obj->region.handler = NULL;
acpi_ut_remove_reference(handler_obj);
node = acpi_ns_map_handle_to_node(device);
if (!node) {
status = AE_BAD_PARAMETER;
- goto unlock;
+ goto unlock_and_exit;
}
/* Root Object */
((handler_type & ACPI_DEVICE_NOTIFY) &&
!acpi_gbl_device_notify.handler)) {
status = AE_NOT_EXIST;
- goto unlock;
+ goto unlock_and_exit;
}
/* Make sure all deferred tasks are completed */
if (!acpi_ev_is_notify_object(node)) {
status = AE_TYPE;
- goto unlock;
+ goto unlock_and_exit;
}
/* Check for an existing internal object */
obj_desc = acpi_ns_get_attached_object(node);
if (!obj_desc) {
status = AE_NOT_EXIST;
- goto unlock;
+ goto unlock_and_exit;
}
/* Object exists - make sure there's an existing handler */
if (handler_type & ACPI_SYSTEM_NOTIFY) {
notify_obj = obj_desc->common_notify.system_notify;
- if ((!notify_obj) ||
- (notify_obj->notify.handler != handler)) {
+ if (!notify_obj) {
+ status = AE_NOT_EXIST;
+ goto unlock_and_exit;
+ }
+
+ if (notify_obj->notify.handler != handler) {
status = AE_BAD_PARAMETER;
- goto unlock;
+ goto unlock_and_exit;
}
/* Make sure all deferred tasks are completed */
if (handler_type & ACPI_DEVICE_NOTIFY) {
notify_obj = obj_desc->common_notify.device_notify;
- if ((!notify_obj) ||
- (notify_obj->notify.handler != handler)) {
+ if (!notify_obj) {
+ status = AE_NOT_EXIST;
+ goto unlock_and_exit;
+ }
+
+ if (notify_obj->notify.handler != handler) {
status = AE_BAD_PARAMETER;
- goto unlock;
+ goto unlock_and_exit;
}
/* Make sure all deferred tasks are completed */
}
}
-unlock:
+ unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
-exit:
+ exit:
if (ACPI_FAILURE(status))
ACPI_EXCEPTION((AE_INFO, status, "Removing notify handler"));
return_ACPI_STATUS(status);
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
- goto unlock;
+ goto unlock_and_exit;
}
/* Make sure that there isn't a handler there already */
if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
ACPI_GPE_DISPATCH_HANDLER) {
status = AE_ALREADY_EXISTS;
- goto unlock;
+ goto unlock_and_exit;
}
/* Allocate and init handler object */
handler = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_handler_info));
if (!handler) {
status = AE_NO_MEMORY;
- goto unlock;
+ goto unlock_and_exit;
}
handler->address = address;
status = acpi_ev_disable_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
- goto unlock;
+ goto unlock_and_exit;
}
/* Install the handler */
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
-unlock:
+ unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
-exit:
+ exit:
if (ACPI_FAILURE(status))
ACPI_EXCEPTION((AE_INFO, status,
"Installing notify handler failed"));
/* Convert and validate the device handle */
node = acpi_ns_map_handle_to_node(device);
- if (!node) {
+ if (!node ||
+ ((node->type != ACPI_TYPE_DEVICE) &&
+ (node->type != ACPI_TYPE_PROCESSOR) &&
+ (node->type != ACPI_TYPE_THERMAL) &&
+ (node != acpi_gbl_root_node))) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
if (handler_obj->address_space.space_id == space_id) {
+ /* Handler must be the same as the installed handler */
+
+ if (handler_obj->address_space.handler != handler) {
+ status = AE_BAD_PARAMETER;
+ goto unlock_and_exit;
+ }
+
/* Matched space_id, first dereference this in the Regions */
ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
* (Offset contains the table_id)
*/
acpi_ns_delete_namespace_by_owner(table_info->owner_id);
- acpi_ut_release_owner_id(&table_info->owner_id);
/* Delete the table itself */
return_ACPI_STATUS(AE_NO_MEMORY);
}
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n",
+ ACPI_FORMAT_UINT64(result)));
+
/* Save the Result */
return_desc->integer.value = result;
&& (obj_desc->mutex.os_mutex != ACPI_GLOBAL_LOCK)) {
ACPI_ERROR((AE_INFO,
"Thread %X cannot release Mutex [%4.4s] acquired by thread %X",
- walk_state->thread->thread_id,
+ (u32) walk_state->thread->thread_id,
acpi_ut_get_node_name(obj_desc->mutex.node),
- obj_desc->mutex.owner_thread->thread_id));
+ (u32) obj_desc->mutex.owner_thread->thread_id));
return_ACPI_STATUS(AE_AML_NOT_OWNER);
}
*
* DESCRIPTION: Implements a semaphore wait with a check to see if the
* semaphore is available immediately. If it is not, the
- * interpreter is released.
+ * interpreter is released before waiting.
*
******************************************************************************/
acpi_status acpi_ex_system_wait_semaphore(acpi_semaphore semaphore, u16 timeout)
*
* RETURN: Status
*
- * DESCRIPTION: Implements a semaphore wait with a check to see if the
- * semaphore is available immediately. If it is not, the
- * interpreter is released.
+ * DESCRIPTION: Implements a mutex wait with a check to see if the
+ * mutex is available immediately. If it is not, the
+ * interpreter is released before waiting.
*
******************************************************************************/
return count;
}
-static struct file_operations acpi_fan_state_ops = {
+static const struct file_operations acpi_fan_state_ops = {
.open = acpi_fan_state_open_fs,
.read = seq_read,
.write = acpi_fan_write_state,
*hotkey_list, int event);
/* event based config */
-static struct file_operations hotkey_config_fops = {
+static const struct file_operations hotkey_config_fops = {
.open = hotkey_open_config,
.read = seq_read,
.write = hotkey_write_config,
};
/* polling based config */
-static struct file_operations hotkey_poll_config_fops = {
+static const struct file_operations hotkey_poll_config_fops = {
.open = hotkey_poll_open_config,
.read = seq_read,
.write = hotkey_write_config,
};
/* hotkey driver info */
-static struct file_operations hotkey_info_fops = {
+static const struct file_operations hotkey_info_fops = {
.open = hotkey_info_open_fs,
.read = seq_read,
.llseek = seq_lseek,
};
/* action */
-static struct file_operations hotkey_action_fops = {
+static const struct file_operations hotkey_action_fops = {
.open = hotkey_action_open_fs,
.read = seq_read,
.write = hotkey_execute_aml_method,
};
/* polling results */
-static struct file_operations hotkey_polling_fops = {
+static const struct file_operations hotkey_polling_fops = {
.open = hotkey_polling_open_fs,
.read = seq_read,
.llseek = seq_lseek,
* specific ID. Used to delete entire ACPI tables. All
* reference counts are updated.
*
+ * MUTEX: Locks namespace during deletion walk.
+ *
******************************************************************************/
void acpi_ns_delete_namespace_by_owner(acpi_owner_id owner_id)
{
struct acpi_namespace_node *child_node;
struct acpi_namespace_node *deletion_node;
- u32 level;
struct acpi_namespace_node *parent_node;
+ u32 level;
+ acpi_status status;
ACPI_FUNCTION_TRACE_U32(ns_delete_namespace_by_owner, owner_id);
return_VOID;
}
+ /* Lock namespace for possible update */
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+ if (ACPI_FAILURE(status)) {
+ return_VOID;
+ }
+
deletion_node = NULL;
parent_node = acpi_gbl_root_node;
child_node = NULL;
}
}
+ (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
return_VOID;
}
#include <linux/delay.h>
#include <linux/workqueue.h>
#include <linux/nmi.h>
-#include <linux/kthread.h>
#include <acpi/acpi.h>
#include <asm/io.h>
#include <acpi/acpi_bus.h>
#endif
}
-
-extern int acpi_in_resume;
-void *acpi_os_allocate(acpi_size size)
-{
- if (acpi_in_resume)
- return kmalloc(size, GFP_ATOMIC);
- else
- return kmalloc(size, GFP_KERNEL);
-}
-
acpi_status acpi_os_get_root_pointer(u32 flags, struct acpi_pointer *addr)
{
if (efi_enabled) {
return;
}
-static int acpi_os_execute_thread(void *context)
-{
- struct acpi_os_dpc *dpc = (struct acpi_os_dpc *)context;
- if (dpc) {
- dpc->function(dpc->context);
- kfree(dpc);
- }
- do_exit(0);
-}
-
/*******************************************************************************
*
* FUNCTION: acpi_os_execute
acpi_status status = AE_OK;
struct acpi_os_dpc *dpc;
struct work_struct *task;
- struct task_struct *p;
+
+ ACPI_FUNCTION_TRACE("os_queue_for_execution");
+
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+ "Scheduling function [%p(%p)] for deferred execution.\n",
+ function, context));
if (!function)
- return AE_BAD_PARAMETER;
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+
/*
* Allocate/initialize DPC structure. Note that this memory will be
* freed by the callee. The kernel handles the tq_struct list in a
* We can save time and code by allocating the DPC and tq_structs
* from the same memory.
*/
- if (type == OSL_NOTIFY_HANDLER) {
- dpc = kmalloc(sizeof(struct acpi_os_dpc), GFP_KERNEL);
- } else {
- dpc = kmalloc(sizeof(struct acpi_os_dpc) +
- sizeof(struct work_struct), GFP_ATOMIC);
- }
+
+ dpc =
+ kmalloc(sizeof(struct acpi_os_dpc) + sizeof(struct work_struct),
+ GFP_ATOMIC);
if (!dpc)
- return AE_NO_MEMORY;
+ return_ACPI_STATUS(AE_NO_MEMORY);
+
dpc->function = function;
dpc->context = context;
- if (type == OSL_NOTIFY_HANDLER) {
- p = kthread_create(acpi_os_execute_thread, dpc, "kacpid_notify");
- if (!IS_ERR(p)) {
- wake_up_process(p);
- } else {
- status = AE_NO_MEMORY;
- kfree(dpc);
- }
- } else {
- task = (void *)(dpc + 1);
- INIT_WORK(task, acpi_os_execute_deferred, (void *)dpc);
- if (!queue_work(kacpid_wq, task)) {
- status = AE_ERROR;
- kfree(dpc);
- }
+ task = (void *)(dpc + 1);
+ INIT_WORK(task, acpi_os_execute_deferred, (void *)dpc);
+
+ if (!queue_work(kacpid_wq, task)) {
+ ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+ "Call to queue_work() failed.\n"));
+ kfree(dpc);
+ status = AE_ERROR;
}
- return status;
+
+ return_ACPI_STATUS(status);
}
EXPORT_SYMBOL(acpi_os_execute);
return (AE_OK);
}
-/*******************************************************************************
- *
- * FUNCTION: acpi_os_acquire_object
- *
- * PARAMETERS: Cache - Handle to cache object
- * ReturnObject - Where the object is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Return a zero-filled object.
- *
- ******************************************************************************/
-
-void *acpi_os_acquire_object(acpi_cache_t * cache)
-{
- void *object = kmem_cache_zalloc(cache, GFP_KERNEL);
- WARN_ON(!object);
- return object;
-}
-
/******************************************************************************
*
* FUNCTION: acpi_os_validate_interface
/* The generic op (default) is by far the most common (16 to 1) */
op = acpi_os_acquire_object(acpi_gbl_ps_node_cache);
- memset(op, 0, sizeof(struct acpi_parse_obj_common));
} else {
/* Extended parseop */
op = acpi_os_acquire_object(acpi_gbl_ps_node_ext_cache);
- memset(op, 0, sizeof(struct acpi_parse_obj_named));
}
/* Initialize the Op */
return 0;
}
-/*
- * FIXME: this is a workaround to avoid nasty warning. It will be removed
- * after every device calls pci_disable_device in .resume.
- */
-int acpi_in_resume;
static int irqrouter_resume(struct sys_device *dev)
{
struct list_head *node = NULL;
/* Make sure SCI is enabled again (Apple firmware bug?) */
acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1, ACPI_MTX_DO_NOT_LOCK);
- acpi_in_resume = 1;
list_for_each(node, &acpi_link.entries) {
link = list_entry(node, struct acpi_pci_link, node);
if (!link) {
}
acpi_pci_link_resume(link);
}
- acpi_in_resume = 0;
return 0;
}
static struct list_head acpi_power_resource_list;
-static struct file_operations acpi_power_fops = {
+static const struct file_operations acpi_power_fops = {
.open = acpi_power_open_fs,
.read = seq_read,
.llseek = seq_lseek,
#define INSTALL_NOTIFY_HANDLER 1
#define UNINSTALL_NOTIFY_HANDLER 2
-static struct file_operations acpi_processor_info_fops = {
+static const struct file_operations acpi_processor_info_fops = {
.open = acpi_processor_info_open_fs,
.read = seq_read,
.llseek = seq_lseek,
PDE(inode)->data);
}
-static struct file_operations acpi_processor_power_fops = {
+static const struct file_operations acpi_processor_power_fops = {
.open = acpi_processor_power_open_fs,
.read = seq_read,
.llseek = seq_lseek,
PDE(inode)->data);
}
-static struct file_operations acpi_system_wakeup_device_fops = {
+static const struct file_operations acpi_system_wakeup_device_fops = {
.open = acpi_system_wakeup_device_open_fs,
.read = seq_read,
.write = acpi_system_write_wakeup_device,
};
#ifdef CONFIG_ACPI_SLEEP_PROC_SLEEP
-static struct file_operations acpi_system_sleep_fops = {
+static const struct file_operations acpi_system_sleep_fops = {
.open = acpi_system_sleep_open_fs,
.read = seq_read,
.write = acpi_system_write_sleep,
};
#endif /* CONFIG_ACPI_SLEEP_PROC_SLEEP */
-static struct file_operations acpi_system_alarm_fops = {
+static const struct file_operations acpi_system_alarm_fops = {
.open = acpi_system_alarm_open_fs,
.read = seq_read,
.write = acpi_system_write_alarm,
return single_open(file, acpi_system_read_info, PDE(inode)->data);
}
-static struct file_operations acpi_system_info_ops = {
+static const struct file_operations acpi_system_info_ops = {
.open = acpi_system_info_open_fs,
.read = seq_read,
.llseek = seq_lseek,
static ssize_t acpi_system_read_dsdt(struct file *, char __user *, size_t,
loff_t *);
-static struct file_operations acpi_system_dsdt_ops = {
+static const struct file_operations acpi_system_dsdt_ops = {
.read = acpi_system_read_dsdt,
};
static ssize_t acpi_system_read_fadt(struct file *, char __user *, size_t,
loff_t *);
-static struct file_operations acpi_system_fadt_ops = {
+static const struct file_operations acpi_system_fadt_ops = {
.read = acpi_system_read_fadt,
};
ACPI_FUNCTION_TRACE(tb_get_this_table);
+ /* Validate minimum length */
+
+ if (header->length < sizeof(struct acpi_table_header)) {
+ ACPI_ERROR((AE_INFO,
+ "Table length (%X) is smaller than minimum (%X)",
+ header->length, sizeof(struct acpi_table_header)));
+
+ return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH);
+ }
+
/*
* Flags contains the current processor mode (Virtual or Physical
* addressing) The pointer_type is either Logical or Physical
*/
status = acpi_os_map_memory(address->pointer.physical,
(acpi_size) header->length,
- (void *)&full_table);
+ ACPI_CAST_PTR(void, &full_table));
if (ACPI_FAILURE(status)) {
ACPI_ERROR((AE_INFO,
"Could not map memory for table [%4.4s] at %8.8X%8.8X for length %X",
status = acpi_ut_allocate_owner_id(&table_desc->owner_id);
if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ goto error_exit1;
}
/* Install the table into the global data structure */
* at this location, so return an error.
*/
if (list_head->next) {
- ACPI_FREE(table_desc);
- return_ACPI_STATUS(AE_ALREADY_EXISTS);
+ status = AE_ALREADY_EXISTS;
+ goto error_exit2;
}
table_desc->next = list_head->next;
table_info->owner_id = table_desc->owner_id;
table_info->installed_desc = table_desc;
return_ACPI_STATUS(AE_OK);
+
+ /* Error exit with cleanup */
+
+ error_exit2:
+
+ acpi_ut_release_owner_id(&table_desc->owner_id);
+
+ error_exit1:
+
+ ACPI_FREE(table_desc);
+ return_ACPI_STATUS(status);
}
/*******************************************************************************
acpi_tb_delete_single_table(table_desc);
+ /* Free the owner ID associated with this table */
+
+ acpi_ut_release_owner_id(&table_desc->owner_id);
+
/* Free the table descriptor */
next_desc = table_desc->next;
ACPI_FUNCTION_ENTRY();
+ /* Validate minimum length */
+
+ if (table_ptr->length < sizeof(struct acpi_table_header)) {
+ ACPI_ERROR((AE_INFO,
+ "RSDT/XSDT length (%X) is smaller than minimum (%X)",
+ table_ptr->length,
+ sizeof(struct acpi_table_header)));
+
+ return (AE_INVALID_TABLE_LENGTH);
+ }
+
/* Search for appropriate signature, RSDT or XSDT */
if (acpi_gbl_root_table_type == ACPI_TABLE_TYPE_RSDT) {
ACPI_ERROR((AE_INFO, "Looking for XSDT"));
}
- ACPI_DUMP_BUFFER((char *)table_ptr, 48);
+ ACPI_DUMP_BUFFER(ACPI_CAST_PTR(char, table_ptr), 48);
return (AE_BAD_SIGNATURE);
}
status = acpi_tb_validate_rsdt(table_info.pointer);
if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ goto error_cleanup;
}
/* Get the number of tables defined in the RSDT or XSDT */
status = acpi_tb_convert_to_xsdt(&table_info);
if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ goto error_cleanup;
}
/* Save the table pointers and allocation info */
status = acpi_tb_init_table_descriptor(ACPI_TABLE_ID_XSDT, &table_info);
if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ goto error_cleanup;
}
acpi_gbl_XSDT =
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "XSDT located at %p\n", acpi_gbl_XSDT));
return_ACPI_STATUS(status);
+
+ error_cleanup:
+
+ /* Free table allocated by acpi_tb_get_table */
+
+ acpi_tb_delete_single_table(&table_info);
+
+ return_ACPI_STATUS(status);
}
* RETURN: Status
*
* DESCRIPTION: This function is called to load a table from the caller's
- * buffer. The buffer must contain an entire ACPI Table including
- * a valid header. The header fields will be verified, and if it
+ * buffer. The buffer must contain an entire ACPI Table including
+ * a valid header. The header fields will be verified, and if it
* is determined that the table is invalid, the call will fail.
*
******************************************************************************/
/* Find all tables of the requested type */
table_desc = acpi_gbl_table_lists[table_type].next;
+ if (!table_desc) {
+ return_ACPI_STATUS(AE_NOT_EXIST);
+ }
+
while (table_desc) {
/*
- * Delete all namespace entries owned by this table. Note that these
- * entries can appear anywhere in the namespace by virtue of the AML
- * "Scope" operator. Thus, we need to track ownership by an ID, not
+ * Delete all namespace objects owned by this table. Note that these
+ * objects can appear anywhere in the namespace by virtue of the AML
+ * "Scope" operator. Thus, we need to track ownership by an ID, not
* simply a position within the hierarchy
*/
acpi_ns_delete_namespace_by_owner(table_desc->owner_id);
- acpi_ut_release_owner_id(&table_desc->owner_id);
table_desc = table_desc->next;
}
* see acpi_gbl_acpi_table_flag
* out_table_header - pointer to the struct acpi_table_header if successful
*
- * DESCRIPTION: This function is called to get an ACPI table header. The caller
+ * DESCRIPTION: This function is called to get an ACPI table header. The caller
* supplies an pointer to a data area sufficient to contain an ACPI
* struct acpi_table_header structure.
*
* The header contains a length field that can be used to determine
- * the size of the buffer needed to contain the entire table. This
+ * the size of the buffer needed to contain the entire table. This
* function is not valid for the RSD PTR table since it does not
* have a standard header and is fixed length.
*
/* Copy the header to the caller's buffer */
- ACPI_MEMCPY((void *)out_table_header, (void *)tbl_ptr,
+ ACPI_MEMCPY(ACPI_CAST_PTR(void, out_table_header),
+ ACPI_CAST_PTR(void, tbl_ptr),
sizeof(struct acpi_table_header));
return_ACPI_STATUS(status);
*
* RETURN: Status
*
- * DESCRIPTION: This function is called to get an ACPI table. The caller
+ * DESCRIPTION: This function is called to get an ACPI table. The caller
* supplies an out_buffer large enough to contain the entire ACPI
- * table. The caller should call the acpi_get_table_header function
- * first to determine the buffer size needed. Upon completion
+ * table. The caller should call the acpi_get_table_header function
+ * first to determine the buffer size needed. Upon completion
* the out_buffer->Length field will indicate the number of bytes
* copied into the out_buffer->buf_ptr buffer. This table will be
* a complete table including the header.
/* Copy the table to the buffer */
- ACPI_MEMCPY((void *)ret_buffer->pointer, (void *)tbl_ptr, table_length);
+ ACPI_MEMCPY(ACPI_CAST_PTR(void, ret_buffer->pointer),
+ ACPI_CAST_PTR(void, tbl_ptr), table_length);
+
return_ACPI_STATUS(AE_OK);
}
struct timer_list timer;
};
-static struct file_operations acpi_thermal_state_fops = {
+static const struct file_operations acpi_thermal_state_fops = {
.open = acpi_thermal_state_open_fs,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
-static struct file_operations acpi_thermal_temp_fops = {
+static const struct file_operations acpi_thermal_temp_fops = {
.open = acpi_thermal_temp_open_fs,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
-static struct file_operations acpi_thermal_trip_fops = {
+static const struct file_operations acpi_thermal_trip_fops = {
.open = acpi_thermal_trip_open_fs,
.read = seq_read,
.write = acpi_thermal_write_trip_points,
.release = single_release,
};
-static struct file_operations acpi_thermal_cooling_fops = {
+static const struct file_operations acpi_thermal_cooling_fops = {
.open = acpi_thermal_cooling_open_fs,
.read = seq_read,
.write = acpi_thermal_write_cooling_mode,
.release = single_release,
};
-static struct file_operations acpi_thermal_polling_fops = {
+static const struct file_operations acpi_thermal_polling_fops = {
.open = acpi_thermal_polling_open_fs,
.read = seq_read,
.write = acpi_thermal_write_polling,
static int acpi_thermal_resume(struct acpi_device *device, int state)
{
struct acpi_thermal *tz = NULL;
+ int i;
if (!device || !acpi_driver_data(device))
return -EINVAL;
tz = (struct acpi_thermal *)acpi_driver_data(device);
- acpi_thermal_check(tz);
+ acpi_thermal_get_temperature(tz);
+
+ for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+ if (tz->trips.active[i].flags.valid) {
+ tz->temperature = tz->trips.active[i].temperature;
+ tz->trips.active[i].flags.enabled = 0;
+
+ acpi_thermal_active(tz);
+
+ tz->state.active |= tz->trips.active[i].flags.enabled;
+ tz->state.active_index = i;
+ }
+ }
+
+ acpi_thermal_check(tz);
return AE_OK;
}
return (status);
}
+#ifdef NOT_USED_BY_LINUX
/*******************************************************************************
*
* FUNCTION: acpi_ut_allocate
return (allocation);
}
+#endif
ACPI_MODULE_NAME("utdebug")
#ifdef ACPI_DEBUG_OUTPUT
-static u32 acpi_gbl_prev_thread_id = 0xFFFFFFFF;
+static acpi_thread_id acpi_gbl_prev_thread_id;
static char *acpi_gbl_fn_entry_str = "----Entry";
static char *acpi_gbl_fn_exit_str = "----Exit-";
if (ACPI_LV_THREADS & acpi_dbg_level) {
acpi_os_printf
("\n**** Context Switch from TID %X to TID %X ****\n\n",
- acpi_gbl_prev_thread_id, thread_id);
+ (u32) acpi_gbl_prev_thread_id, (u32) thread_id);
}
acpi_gbl_prev_thread_id = thread_id;
*/
switch (ACPI_GET_OBJECT_TYPE(object)) {
case ACPI_TYPE_DEVICE:
+ case ACPI_TYPE_PROCESSOR:
+ case ACPI_TYPE_POWER:
+ case ACPI_TYPE_THERMAL:
- acpi_ut_update_ref_count(object->device.system_notify,
- action);
- acpi_ut_update_ref_count(object->device.device_notify,
- action);
+ /* Update the notify objects for these types (if present) */
+
+ acpi_ut_update_ref_count(object->common_notify.
+ system_notify, action);
+ acpi_ut_update_ref_count(object->common_notify.
+ device_notify, action);
break;
case ACPI_TYPE_PACKAGE:
u8 acpi_ut_is_aml_table(struct acpi_table_header *table)
{
- /* Ignore tables that contain AML */
+ /* These are the only tables that contain executable AML */
if (ACPI_COMPARE_NAME(table->signature, DSDT_SIG) ||
ACPI_COMPARE_NAME(table->signature, PSDT_SIG) ||
{
if (revision <= 1) {
+
+ /* 32-bit case */
+
acpi_gbl_integer_bit_width = 32;
acpi_gbl_integer_nybble_width = 8;
acpi_gbl_integer_byte_width = 4;
} else {
+ /* 64-bit case (ACPI 2.0+) */
+
acpi_gbl_integer_bit_width = 64;
acpi_gbl_integer_nybble_width = 16;
acpi_gbl_integer_byte_width = 8;
* FUNCTION: acpi_ut_valid_acpi_char
*
* PARAMETERS: Char - The character to be examined
+ * Position - Byte position (0-3)
*
* RETURN: TRUE if the character is valid, FALSE otherwise
*
*
* RETURN: Status and Converted value
*
- * DESCRIPTION: Convert a string into an unsigned value.
+ * DESCRIPTION: Convert a string into an unsigned value. Performs either a
+ * 32-bit or 64-bit conversion, depending on the current mode
+ * of the interpreter.
* NOTE: Does not support Octal strings, not needed.
*
******************************************************************************/
u8 sign_of0x = 0;
u8 term = 0;
- ACPI_FUNCTION_TRACE(ut_stroul64);
+ ACPI_FUNCTION_TRACE_STR(ut_stroul64, string);
switch (base) {
case ACPI_ANY_BASE:
}
}
+ /*
+ * Perform a 32-bit or 64-bit conversion, depending upon the current
+ * execution mode of the interpreter
+ */
dividend = (mode32) ? ACPI_UINT32_MAX : ACPI_UINT64_MAX;
- /* At least one character in the string here */
-
- /* Main loop: convert the string to a 64-bit integer */
+ /* Main loop: convert the string to a 32- or 64-bit integer */
while (*string) {
if (ACPI_IS_DIGIT(*string)) {
all_done:
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n",
+ ACPI_FORMAT_UINT64(return_value)));
+
*ret_integer = return_value;
return_ACPI_STATUS(AE_OK);
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
"Thread %X attempting to acquire Mutex [%s]\n",
- this_thread_id, acpi_ut_get_mutex_name(mutex_id)));
+ (u32) this_thread_id, acpi_ut_get_mutex_name(mutex_id)));
status = acpi_os_acquire_mutex(acpi_gbl_mutex_info[mutex_id].mutex,
ACPI_WAIT_FOREVER);
if (ACPI_SUCCESS(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
"Thread %X acquired Mutex [%s]\n",
- this_thread_id,
+ (u32) this_thread_id,
acpi_ut_get_mutex_name(mutex_id)));
acpi_gbl_mutex_info[mutex_id].use_count++;
} else {
ACPI_EXCEPTION((AE_INFO, status,
"Thread %X could not acquire Mutex [%X]",
- this_thread_id, mutex_id));
+ (u32) this_thread_id, mutex_id));
}
return (status);
this_thread_id = acpi_os_get_thread_id();
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
- "Thread %X releasing Mutex [%s]\n", this_thread_id,
+ "Thread %X releasing Mutex [%s]\n", (u32) this_thread_id,
acpi_ut_get_mutex_name(mutex_id)));
if (mutex_id > ACPI_MAX_MUTEX) {
state->common.descriptor_type = ACPI_DESC_TYPE_STATE_THREAD;
state->thread.thread_id = acpi_os_get_thread_id();
+ /* Check for invalid thread ID - zero is very bad, it will break things */
+
+ if (!state->thread.thread_id) {
+ ACPI_ERROR((AE_INFO, "Invalid zero ID from AcpiOsGetThreadId"));
+ state->thread.thread_id = (acpi_thread_id) 1;
+ }
+
return_PTR((struct acpi_thread_state *)state);
}
default n
help
This defers work to be done by the interrupt handler to a
- tasklet instead of hanlding everything at interrupt time. This
+ tasklet instead of handling everything at interrupt time. This
may improve the responsive of the host.
config ATM_FORE200E_TX_RETRY
config FW_LOADER
tristate "Userspace firmware loading support"
- select HOTPLUG
+ depends on HOTPLUG
---help---
This option is provided for the case where no in-kernel-tree modules
require userspace firmware loading support, but a module built outside
};
-decl_subsys(bus, &ktype_bus, NULL);
+static decl_subsys(bus, &ktype_bus, NULL);
#ifdef CONFIG_HOTPLUG
*
* Note that kset_find_obj increments bus' reference count.
*/
-
+#if 0
struct bus_type * find_bus(char * name)
{
struct kobject * k = kset_find_obj(&bus_subsys.kset, name);
return k ? to_bus(k) : NULL;
}
+#endif /* 0 */
/**
/**
* device_create - creates a device and registers it with sysfs
- * @cs: pointer to the struct class that this device should be registered to.
- * @parent: pointer to the parent struct device of this new device, if any.
- * @dev: the dev_t for the char device to be added.
- * @fmt: string for the class device's name
+ * @class: pointer to the struct class that this device should be registered to
+ * @parent: pointer to the parent struct device of this new device, if any
+ * @devt: the dev_t for the char device to be added
+ * @fmt: string for the device's name
+ *
+ * This function can be used by char device classes. A struct device
+ * will be created in sysfs, registered to the specified class.
*
- * This function can be used by char device classes. A struct
- * device will be created in sysfs, registered to the specified
- * class.
* A "dev" file will be created, showing the dev_t for the device, if
* the dev_t is not 0,0.
- * If a pointer to a parent struct device is passed in, the newly
- * created struct device will be a child of that device in sysfs. The
- * pointer to the struct device will be returned from the call. Any
- * further sysfs files that might be required can be created using this
+ * If a pointer to a parent struct device is passed in, the newly created
+ * struct device will be a child of that device in sysfs.
+ * The pointer to the struct device will be returned from the call.
+ * Any further sysfs files that might be required can be created using this
* pointer.
*
* Note: the struct class passed to this function must have previously
/**
* device_destroy - removes a device that was created with device_create()
- * @class: the pointer to the struct class that this device was registered * with.
- * @dev: the dev_t of the device that was previously registered.
+ * @class: pointer to the struct class that this device was registered with
+ * @devt: the dev_t of the device that was previously registered
*
- * This call unregisters and cleans up a class device that was created with a
- * call to class_device_create()
+ * This call unregisters and cleans up a device that was created with a
+ * call to device_create().
*/
void device_destroy(struct class *class, dev_t devt)
{
what are you doing. If you are using IBM S/390, then set this to
8192.
+config BLK_DEV_RAM_BLOCKSIZE
+ int "Default RAM disk block size (bytes)"
+ depends on BLK_DEV_RAM
+ default "1024"
+ help
+ The default value is 1024 kilobytes. PAGE_SIZE is a much more
+ efficient choice however. The default is kept to ensure initrd
+ setups function - apparently needed by the rd_load_image routine
+ that supposes the filesystem in the image uses a 1024 blocksize.
+
config BLK_DEV_INITRD
bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
depends on BROKEN || !FRV
{
int n, i;
- n = MINOR(inode->i_rdev);
+ n = iminor(inode);
filp->private_data = (void *) (unsigned long) n;
for (i = 0; i < ARRAY_SIZE(chardevs); ++i)
(log_index < id_ctlr_buf->nr_drvs)
&& (log_unit < NWD);
log_unit++) {
- struct gendisk *disk = ida_gendisk[ctlr][log_unit];
-
size = sizeof(sense_log_drv_stat_t);
/*
* behaviour. The default is still BLOCK_SIZE (needed by rd_load_image that
* supposes the filesystem in the image uses a BLOCK_SIZE blocksize).
*/
-static int rd_blocksize = BLOCK_SIZE; /* blocksize of the RAM disks */
+static int rd_blocksize = CONFIG_BLK_DEV_RAM_BLOCKSIZE;
/*
* Copyright (C) 2000 Linus Torvalds.
data->fw_data = kmalloc(firmware->size, GFP_KERNEL);
if (!data->fw_data) {
BT_ERR("Can't allocate memory for firmware image");
+ release_firmware(firmware);
usb_free_urb(data->urb);
kfree(data->buffer);
kfree(data);
/* Flush any pending characters in the driver and discipline. */
tty_ldisc_flush(tty);
- if (tty->driver->flush_buffer)
+ if (tty->driver && tty->driver->flush_buffer)
tty->driver->flush_buffer(tty);
if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
if (tty->ldisc.flush_buffer)
tty->ldisc.flush_buffer(tty);
- if (tty->driver->flush_buffer)
+ if (tty->driver && tty->driver->flush_buffer)
tty->driver->flush_buffer(tty);
return 0;
init_cdrom_command(&cgc, buf, sizeof(buf), CGC_DATA_READ);
cgc.cmd[0] = GPCMD_READ_DVD_STRUCTURE;
cgc.cmd[7] = s->type;
- cgc.cmd[9] = cgc.buflen = 0xff;
+ cgc.cmd[9] = cgc.buflen & 0xff;
if ((ret = cdo->generic_packet(cdi, &cgc)))
return ret;
hp->inbuf_end = hp->inbuf;
hp->state = HVSI_CLOSED;
hp->vtermno = *vtermno;
- hp->virq = irq_create_mapping(NULL, irq[0], 0);
+ hp->virq = irq_create_mapping(NULL, irq[0]);
if (hp->virq == NO_IRQ) {
printk(KERN_ERR "%s: couldn't create irq mapping for 0x%x\n",
__FUNCTION__, irq[0]);
MODULE_LICENSE("GPL");
+
+static struct pci_device_id ip2main_pci_tbl[] __devinitdata = {
+ { PCI_DEVICE(PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_IP2EX) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(pci, ip2main_pci_tbl);
return 1;
}
-static inline int valid_mmap_phys_addr_range(unsigned long addr, size_t size)
+static inline int valid_mmap_phys_addr_range(unsigned long pfn, size_t size)
{
return 1;
}
{
size_t size = vma->vm_end - vma->vm_start;
- if (!valid_mmap_phys_addr_range(vma->vm_pgoff << PAGE_SHIFT, size))
+ if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size))
return -EINVAL;
vma->vm_page_prot = phys_mem_access_prot(file, vma->vm_pgoff,
amp->gpio_config(m, ~1, 0);
break;
case 'T':
- dev_dbg(dev, "GPIO%d output is push pull\n",
- m);
+ dev_dbg(dev, "GPIO%d output is push pull\n", m);
amp->gpio_config(m, ~2, 2);
break;
case 't':
- dev_dbg(dev, "GPIO%d output is open drain\n",
- m);
+ dev_dbg(dev, "GPIO%d output is open drain\n", m);
amp->gpio_config(m, ~2, 0);
break;
case 'P':
National Semiconductor PC8736x GPIO driver. Allows a user space
process to play with the GPIO pins.
- Copyright (c) 2005 Jim Cromie <jim.cromie@gmail.com>
+ Copyright (c) 2005,2006 Jim Cromie <jim.cromie@gmail.com>
adapted from linux/drivers/char/scx200_gpio.c
Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>,
*/
-#include <linux/config.h>
#include <linux/fs.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/cdev.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/mutex.h>
#define DEVNAME "pc8736x_gpio"
MODULE_AUTHOR("Jim Cromie <jim.cromie@gmail.com>");
-MODULE_DESCRIPTION("NatSemi PC-8736x GPIO Pin Driver");
+MODULE_DESCRIPTION("NatSemi/Winbond PC-8736x GPIO Pin Driver");
MODULE_LICENSE("GPL");
static int major; /* default to dynamic major */
#define SIO_BASE1 0x2E /* 1st command-reg to check */
#define SIO_BASE2 0x4E /* alt command-reg to check */
-#define SIO_BASE_OFFSET 0x20
#define SIO_SID 0x20 /* SuperI/O ID Register */
#define SIO_SID_VALUE 0xe9 /* Expected value in SuperI/O ID Register */
#define SIO_CF1 0x21 /* chip config, bit0 is chip enable */
-#define PC8736X_GPIO_SIZE 16
+#define PC8736X_GPIO_RANGE 16 /* ioaddr range */
+#define PC8736X_GPIO_CT 32 /* minors matching 4 8 bit ports */
#define SIO_UNIT_SEL 0x7 /* unit select reg */
#define SIO_UNIT_ACT 0x30 /* unit enable */
pc8736x_gpio_set(index, !pc8736x_gpio_current(index));
}
-static struct nsc_gpio_ops pc8736x_access = {
+static struct nsc_gpio_ops pc8736x_gpio_ops = {
.owner = THIS_MODULE,
.gpio_config = pc8736x_gpio_configure,
.gpio_dump = nsc_gpio_dump,
.gpio_get = pc8736x_gpio_get,
.gpio_set = pc8736x_gpio_set,
- .gpio_set_high = pc8736x_gpio_set_high,
- .gpio_set_low = pc8736x_gpio_set_low,
.gpio_change = pc8736x_gpio_change,
.gpio_current = pc8736x_gpio_current
};
+EXPORT_SYMBOL(pc8736x_gpio_ops);
static int pc8736x_gpio_open(struct inode *inode, struct file *file)
{
unsigned m = iminor(inode);
- file->private_data = &pc8736x_access;
+ file->private_data = &pc8736x_gpio_ops;
dev_dbg(&pdev->dev, "open %d\n", m);
- if (m > 63)
+ if (m >= PC8736X_GPIO_CT)
return -EINVAL;
return nonseekable_open(inode, file);
}
-static const struct file_operations pc8736x_gpio_fops = {
+static const struct file_operations pc8736x_gpio_fileops = {
.owner = THIS_MODULE,
.open = pc8736x_gpio_open,
.write = nsc_gpio_write,
}
+static struct cdev pc8736x_gpio_cdev;
+
static int __init pc8736x_gpio_init(void)
{
- int rc = 0;
+ int rc;
+ dev_t devid;
pdev = platform_device_alloc(DEVNAME, 0);
if (!pdev)
dev_err(&pdev->dev, "no device found\n");
goto undo_platform_dev_add;
}
- pc8736x_access.dev = &pdev->dev;
+ pc8736x_gpio_ops.dev = &pdev->dev;
/* Verify that chip and it's GPIO unit are both enabled.
My BIOS does this, so I take minimum action here
pc8736x_gpio_base = (superio_inb(SIO_BASE_HADDR) << 8
| superio_inb(SIO_BASE_LADDR));
- if (!request_region(pc8736x_gpio_base, 16, DEVNAME)) {
+ if (!request_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE, DEVNAME)) {
rc = -ENODEV;
dev_err(&pdev->dev, "GPIO ioport %x busy\n",
pc8736x_gpio_base);
}
dev_info(&pdev->dev, "GPIO ioport %x reserved\n", pc8736x_gpio_base);
- rc = register_chrdev(major, DEVNAME, &pc8736x_gpio_fops);
+ if (major) {
+ devid = MKDEV(major, 0);
+ rc = register_chrdev_region(devid, PC8736X_GPIO_CT, DEVNAME);
+ } else {
+ rc = alloc_chrdev_region(&devid, 0, PC8736X_GPIO_CT, DEVNAME);
+ major = MAJOR(devid);
+ }
+
if (rc < 0) {
dev_err(&pdev->dev, "register-chrdev failed: %d\n", rc);
- goto undo_platform_dev_add;
+ goto undo_request_region;
}
if (!major) {
major = rc;
}
pc8736x_init_shadow();
+
+ /* ignore minor errs, and succeed */
+ cdev_init(&pc8736x_gpio_cdev, &pc8736x_gpio_fileops);
+ cdev_add(&pc8736x_gpio_cdev, devid, PC8736X_GPIO_CT);
+
return 0;
+undo_request_region:
+ release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE);
undo_platform_dev_add:
platform_device_del(pdev);
undo_platform_dev_alloc:
static void __exit pc8736x_gpio_cleanup(void)
{
- dev_dbg(&pdev->dev, " cleanup\n");
+ dev_dbg(&pdev->dev, "cleanup\n");
- release_region(pc8736x_gpio_base, 16);
+ cdev_del(&pc8736x_gpio_cdev);
+ unregister_chrdev_region(MKDEV(major,0), PC8736X_GPIO_CT);
+ release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE);
- unregister_chrdev(major, DEVNAME);
+ platform_device_del(pdev);
+ platform_device_put(pdev);
}
-EXPORT_SYMBOL(pc8736x_access);
-
module_init(pc8736x_gpio_init);
module_exit(pc8736x_gpio_cleanup);
* 1.11a Daniele Bellucci: Audit create_proc_read_entry in rtc_init
* 1.12 Venkatesh Pallipadi: Hooks for emulating rtc on HPET base-timer
* CONFIG_HPET_EMULATE_RTC
+ * 1.12a Maciej W. Rozycki: Handle memory-mapped chips properly.
* 1.12ac Alan Cox: Allow read access to the day of week register
*/
#define RTC_VERSION "1.12ac"
-#define RTC_IO_EXTENT 0x8
-
/*
* Note that *all* calls to CMOS_READ and CMOS_WRITE are done with
* interrupts disabled. Due to the index-port/data-port (0x70/0x71)
if (rtc_has_irq == 0)
return -EIO;
- if (count < sizeof(unsigned))
+ /*
+ * Historically this function used to assume that sizeof(unsigned long)
+ * is the same in userspace and kernelspace. This lead to problems
+ * for configurations with multiple ABIs such a the MIPS o32 and 64
+ * ABIs supported on the same kernel. So now we support read of both
+ * 4 and 8 bytes and assume that's the sizeof(unsigned long) in the
+ * userspace ABI.
+ */
+ if (count != sizeof(unsigned int) && count != sizeof(unsigned long))
return -EINVAL;
add_wait_queue(&rtc_wait, &wait);
schedule();
} while (1);
- if (count < sizeof(unsigned long))
- retval = put_user(data, (unsigned int __user *)buf) ?: sizeof(int);
+ if (count == sizeof(unsigned int))
+ retval = put_user(data, (unsigned int __user *)buf) ?: sizeof(int);
else
retval = put_user(data, (unsigned long __user *)buf) ?: sizeof(long);
+ if (!retval)
+ retval = count;
out:
current->state = TASK_RUNNING;
remove_wait_queue(&rtc_wait, &wait);
struct sparc_isa_device *isa_dev;
#endif
#endif
+#ifndef __sparc__
+ void *r;
+#endif
#ifdef __sparc__
for_each_ebus(ebus) {
}
no_irq:
#else
- if (!request_region(RTC_PORT(0), RTC_IO_EXTENT, "rtc")) {
- printk(KERN_ERR "rtc: I/O port %d is not free.\n", RTC_PORT (0));
+ if (RTC_IOMAPPED)
+ r = request_region(RTC_PORT(0), RTC_IO_EXTENT, "rtc");
+ else
+ r = request_mem_region(RTC_PORT(0), RTC_IO_EXTENT, "rtc");
+ if (!r) {
+ printk(KERN_ERR "rtc: I/O resource %lx is not free.\n",
+ (long)(RTC_PORT(0)));
return -EIO;
}
if(request_irq(RTC_IRQ, rtc_int_handler_ptr, IRQF_DISABLED, "rtc", NULL)) {
/* Yeah right, seeing as irq 8 doesn't even hit the bus. */
printk(KERN_ERR "rtc: IRQ %d is not free.\n", RTC_IRQ);
- release_region(RTC_PORT(0), RTC_IO_EXTENT);
+ if (RTC_IOMAPPED)
+ release_region(RTC_PORT(0), RTC_IO_EXTENT);
+ else
+ release_mem_region(RTC_PORT(0), RTC_IO_EXTENT);
return -EIO;
}
hpet_rtc_timer_init();
if (rtc_has_irq)
free_irq (rtc_irq, &rtc_port);
#else
- release_region (RTC_PORT (0), RTC_IO_EXTENT);
+ if (RTC_IOMAPPED)
+ release_region(RTC_PORT(0), RTC_IO_EXTENT);
+ else
+ release_mem_region(RTC_PORT(0), RTC_IO_EXTENT);
#ifdef RTC_IRQ
if (rtc_has_irq)
free_irq (RTC_IRQ, NULL);
void rtc_get_rtc_time(struct rtc_time *rtc_tm)
{
- unsigned long uip_watchdog = jiffies;
+ unsigned long uip_watchdog = jiffies, flags;
unsigned char ctrl;
#ifdef CONFIG_MACH_DECSTATION
unsigned int real_year;
* RTC has RTC_DAY_OF_WEEK, we should usually ignore it, as it is
* only updated by the RTC when initially set to a non-zero value.
*/
- spin_lock_irq(&rtc_lock);
+ spin_lock_irqsave(&rtc_lock, flags);
rtc_tm->tm_sec = CMOS_READ(RTC_SECONDS);
rtc_tm->tm_min = CMOS_READ(RTC_MINUTES);
rtc_tm->tm_hour = CMOS_READ(RTC_HOURS);
real_year = CMOS_READ(RTC_DEC_YEAR);
#endif
ctrl = CMOS_READ(RTC_CONTROL);
- spin_unlock_irq(&rtc_lock);
+ spin_unlock_irqrestore(&rtc_lock, flags);
if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
{
Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com> */
-#include <linux/config.h>
#include <linux/device.h>
#include <linux/fs.h>
#include <linux/module.h>
#include <linux/scx200_gpio.h>
#include <linux/nsc_gpio.h>
-#define NAME "scx200_gpio"
-#define DEVNAME NAME
+#define DRVNAME "scx200_gpio"
static struct platform_device *pdev;
MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>");
-MODULE_DESCRIPTION("NatSemi SCx200 GPIO Pin Driver");
+MODULE_DESCRIPTION("NatSemi/AMD SCx200 GPIO Pin Driver");
MODULE_LICENSE("GPL");
static int major = 0; /* default to dynamic major */
module_param(major, int, 0);
MODULE_PARM_DESC(major, "Major device number");
-struct nsc_gpio_ops scx200_access = {
+#define MAX_PINS 32 /* 64 later, when known ok */
+
+struct nsc_gpio_ops scx200_gpio_ops = {
.owner = THIS_MODULE,
.gpio_config = scx200_gpio_configure,
.gpio_dump = nsc_gpio_dump,
.gpio_get = scx200_gpio_get,
.gpio_set = scx200_gpio_set,
- .gpio_set_high = scx200_gpio_set_high,
- .gpio_set_low = scx200_gpio_set_low,
.gpio_change = scx200_gpio_change,
.gpio_current = scx200_gpio_current
};
+EXPORT_SYMBOL(scx200_gpio_ops);
static int scx200_gpio_open(struct inode *inode, struct file *file)
{
unsigned m = iminor(inode);
- file->private_data = &scx200_access;
+ file->private_data = &scx200_gpio_ops;
- if (m > 63)
+ if (m >= MAX_PINS)
return -EINVAL;
return nonseekable_open(inode, file);
}
return 0;
}
-
-static const struct file_operations scx200_gpio_fops = {
+static const struct file_operations scx200_gpio_fileops = {
.owner = THIS_MODULE,
.write = nsc_gpio_write,
.read = nsc_gpio_read,
.release = scx200_gpio_release,
};
-struct cdev *scx200_devices;
-static int num_pins = 32;
+struct cdev scx200_gpio_cdev; /* use 1 cdev for all pins */
static int __init scx200_gpio_init(void)
{
- int rc, i;
- dev_t dev = MKDEV(major, 0);
+ int rc;
+ dev_t devid;
if (!scx200_gpio_present()) {
- printk(KERN_ERR NAME ": no SCx200 gpio present\n");
+ printk(KERN_ERR DRVNAME ": no SCx200 gpio present\n");
return -ENODEV;
}
/* support dev_dbg() with pdev->dev */
- pdev = platform_device_alloc(DEVNAME, 0);
+ pdev = platform_device_alloc(DRVNAME, 0);
if (!pdev)
return -ENOMEM;
goto undo_malloc;
/* nsc_gpio uses dev_dbg(), so needs this */
- scx200_access.dev = &pdev->dev;
-
- if (major)
- rc = register_chrdev_region(dev, num_pins, "scx200_gpio");
- else {
- rc = alloc_chrdev_region(&dev, 0, num_pins, "scx200_gpio");
- major = MAJOR(dev);
+ scx200_gpio_ops.dev = &pdev->dev;
+
+ if (major) {
+ devid = MKDEV(major, 0);
+ rc = register_chrdev_region(devid, MAX_PINS, "scx200_gpio");
+ } else {
+ rc = alloc_chrdev_region(&devid, 0, MAX_PINS, "scx200_gpio");
+ major = MAJOR(devid);
}
if (rc < 0) {
dev_err(&pdev->dev, "SCx200 chrdev_region err: %d\n", rc);
goto undo_platform_device_add;
}
- scx200_devices = kzalloc(num_pins * sizeof(struct cdev), GFP_KERNEL);
- if (!scx200_devices) {
- rc = -ENOMEM;
- goto undo_chrdev_region;
- }
- for (i = 0; i < num_pins; i++) {
- struct cdev *cdev = &scx200_devices[i];
- cdev_init(cdev, &scx200_gpio_fops);
- cdev->owner = THIS_MODULE;
- rc = cdev_add(cdev, MKDEV(major, i), 1);
- /* tolerate 'minor' errors */
- if (rc)
- dev_err(&pdev->dev, "Error %d on minor %d", rc, i);
- }
+
+ cdev_init(&scx200_gpio_cdev, &scx200_gpio_fileops);
+ cdev_add(&scx200_gpio_cdev, devid, MAX_PINS);
return 0; /* succeed */
-undo_chrdev_region:
- unregister_chrdev_region(dev, num_pins);
undo_platform_device_add:
platform_device_del(pdev);
undo_malloc:
static void __exit scx200_gpio_cleanup(void)
{
- kfree(scx200_devices);
- unregister_chrdev_region(MKDEV(major, 0), num_pins);
+ cdev_del(&scx200_gpio_cdev);
+ /* cdev_put(&scx200_gpio_cdev); */
+
+ unregister_chrdev_region(MKDEV(major, 0), MAX_PINS);
platform_device_unregister(pdev);
- /* kfree(pdev); */
}
module_init(scx200_gpio_init);
" Sending SIGPWR to init...\n");
/* give a SIGPWR signal to init proc */
-
- /* first find init's task */
- read_lock(&tasklist_lock);
- for_each_process(p) {
- if (p->pid == 1)
- break;
- }
- if (p) {
- force_sig(SIGPWR, p);
- } else {
- printk(KERN_ERR "Failed to signal init!\n");
- snsc_shutting_down = 0; /* so can try again (?) */
- }
- read_unlock(&tasklist_lock);
+ kill_proc(1, SIGPWR, 0);
} else {
/* print to system log */
printk("%s|$(0x%x)%s\n", severity, esp_code, desc);
func_exit();
}
+static struct pci_device_id specialx_pci_tbl[] __devinitdata = {
+ { PCI_DEVICE(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_IO8) },
+ { }
+};
+MODULE_DEVICE_TABLE(pci, specialx_pci_tbl);
+
module_init(specialix_init_module);
module_exit(specialix_exit_module);
put_device(dev);
clear_bit(chip->dev_num, dev_mask);
kfree(chip);
+ kfree(devname);
return NULL;
}
iowrite32(interrupt,
chip->vendor.iobase +
TPM_INT_STATUS(chip->vendor.locality));
+ ioread32(chip->vendor.iobase + TPM_INT_STATUS(chip->vendor.locality));
return IRQ_HANDLED;
}
module_param(interrupts, bool, 0444);
MODULE_PARM_DESC(interrupts, "Enable interrupts");
-static int __devinit tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
- const struct pnp_device_id *pnp_id)
+static int tpm_tis_init(struct device *dev, resource_size_t start,
+ resource_size_t len)
{
u32 vendor, intfcaps, intmask;
int rc, i;
- unsigned long start, len;
struct tpm_chip *chip;
- start = pnp_mem_start(pnp_dev, 0);
- len = pnp_mem_len(pnp_dev, 0);
-
if (!start)
start = TIS_MEM_BASE;
if (!len)
len = TIS_MEM_LEN;
- if (!(chip = tpm_register_hardware(&pnp_dev->dev, &tpm_tis)))
+ if (!(chip = tpm_register_hardware(dev, &tpm_tis)))
return -ENODEV;
chip->vendor.iobase = ioremap(start, len);
chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
- dev_info(&pnp_dev->dev,
+ dev_info(dev,
"1.2 TPM (device-id 0x%X, rev-id %d)\n",
vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
intfcaps =
ioread32(chip->vendor.iobase +
TPM_INTF_CAPS(chip->vendor.locality));
- dev_dbg(&pnp_dev->dev, "TPM interface capabilities (0x%x):\n",
+ dev_dbg(dev, "TPM interface capabilities (0x%x):\n",
intfcaps);
if (intfcaps & TPM_INTF_BURST_COUNT_STATIC)
- dev_dbg(&pnp_dev->dev, "\tBurst Count Static\n");
+ dev_dbg(dev, "\tBurst Count Static\n");
if (intfcaps & TPM_INTF_CMD_READY_INT)
- dev_dbg(&pnp_dev->dev, "\tCommand Ready Int Support\n");
+ dev_dbg(dev, "\tCommand Ready Int Support\n");
if (intfcaps & TPM_INTF_INT_EDGE_FALLING)
- dev_dbg(&pnp_dev->dev, "\tInterrupt Edge Falling\n");
+ dev_dbg(dev, "\tInterrupt Edge Falling\n");
if (intfcaps & TPM_INTF_INT_EDGE_RISING)
- dev_dbg(&pnp_dev->dev, "\tInterrupt Edge Rising\n");
+ dev_dbg(dev, "\tInterrupt Edge Rising\n");
if (intfcaps & TPM_INTF_INT_LEVEL_LOW)
- dev_dbg(&pnp_dev->dev, "\tInterrupt Level Low\n");
+ dev_dbg(dev, "\tInterrupt Level Low\n");
if (intfcaps & TPM_INTF_INT_LEVEL_HIGH)
- dev_dbg(&pnp_dev->dev, "\tInterrupt Level High\n");
+ dev_dbg(dev, "\tInterrupt Level High\n");
if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT)
- dev_dbg(&pnp_dev->dev, "\tLocality Change Int Support\n");
+ dev_dbg(dev, "\tLocality Change Int Support\n");
if (intfcaps & TPM_INTF_STS_VALID_INT)
- dev_dbg(&pnp_dev->dev, "\tSts Valid Int Support\n");
+ dev_dbg(dev, "\tSts Valid Int Support\n");
if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
- dev_dbg(&pnp_dev->dev, "\tData Avail Int Support\n");
+ dev_dbg(dev, "\tData Avail Int Support\n");
if (request_locality(chip, 0) != 0) {
rc = -ENODEV;
return rc;
}
+static int __devinit tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
+ const struct pnp_device_id *pnp_id)
+{
+ resource_size_t start, len;
+ start = pnp_mem_start(pnp_dev, 0);
+ len = pnp_mem_len(pnp_dev, 0);
+
+ return tpm_tis_init(&pnp_dev->dev, start, len);
+}
+
static int tpm_tis_pnp_suspend(struct pnp_dev *dev, pm_message_t msg)
{
return tpm_pm_suspend(&dev->dev, msg);
sizeof(tpm_pnp_tbl[TIS_HID_USR_IDX].id), 0444);
MODULE_PARM_DESC(hid, "Set additional specific HID for this driver to probe");
+static struct device_driver tis_drv = {
+ .name = "tpm_tis",
+ .bus = &platform_bus_type,
+ .owner = THIS_MODULE,
+ .suspend = tpm_pm_suspend,
+ .resume = tpm_pm_resume,
+};
+
+static struct platform_device *pdev;
+
+static int force;
+module_param(force, bool, 0444);
+MODULE_PARM_DESC(force, "Force device probe rather than using ACPI entry");
static int __init init_tis(void)
{
+ int rc;
+
+ if (force) {
+ rc = driver_register(&tis_drv);
+ if (rc < 0)
+ return rc;
+ if (IS_ERR(pdev=platform_device_register_simple("tpm_tis", -1, NULL, 0)))
+ return PTR_ERR(pdev);
+ if((rc=tpm_tis_init(&pdev->dev, 0, 0)) != 0) {
+ platform_device_unregister(pdev);
+ driver_unregister(&tis_drv);
+ }
+ return rc;
+ }
+
return pnp_register_driver(&tis_pnp_driver);
}
tpm_remove_hardware(chip->dev);
}
spin_unlock(&tis_lock);
- pnp_unregister_driver(&tis_pnp_driver);
+ if (force) {
+ platform_device_unregister(pdev);
+ driver_unregister(&tis_drv);
+ } else
+ pnp_unregister_driver(&tis_pnp_driver);
}
module_init(init_tis);
#include <asm/cpu.h>
#include <asm/io.h>
#include <asm/vr41xx/giu.h>
+#include <asm/vr41xx/irq.h>
#include <asm/vr41xx/vr41xx.h>
MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
#define AES_EXTENDED_KEY_SIZE 64 /* in uint32_t units */
#define AES_EXTENDED_KEY_SIZE_B (AES_EXTENDED_KEY_SIZE * sizeof(uint32_t))
+/* Whenever making any changes to the following
+ * structure *make sure* you keep E, d_data
+ * and cword aligned on 16 Bytes boundaries!!! */
struct aes_ctx {
struct {
struct cword encrypt;
} cword;
u32 *D;
int key_length;
- u32 E[AES_EXTENDED_KEY_SIZE];
- u32 d_data[AES_EXTENDED_KEY_SIZE];
+ u32 E[AES_EXTENDED_KEY_SIZE]
+ __attribute__ ((__aligned__(PADLOCK_ALIGNMENT)));
+ u32 d_data[AES_EXTENDED_KEY_SIZE]
+ __attribute__ ((__aligned__(PADLOCK_ALIGNMENT)));
};
/* ====== Key management routines ====== */
/*
* edac_mc kernel module
- * (C) 2005 Linux Networx (http://lnxi.com)
+ * (C) 2005, 2006 Linux Networx (http://lnxi.com)
* This file may be distributed under the terms of the
* GNU General Public License.
*
#include <asm/edac.h>
#include "edac_mc.h"
-#define EDAC_MC_VERSION "Ver: 2.0.0 " __DATE__
+#define EDAC_MC_VERSION "Ver: 2.0.1 " __DATE__
-/* For now, disable the EDAC sysfs code. The sysfs interface that EDAC
- * presents to user space needs more thought, and is likely to change
- * substantially.
- */
-#define DISABLE_EDAC_SYSFS
#ifdef CONFIG_EDAC_DEBUG
/* Values of 0 to 4 will generate output */
static int panic_on_pci_parity; /* default no panic on PCI Parity */
static atomic_t pci_parity_count = ATOMIC_INIT(0);
-/* Structure of the whitelist and blacklist arrays */
-struct edac_pci_device_list {
- unsigned int vendor; /* Vendor ID */
- unsigned int device; /* Deviice ID */
-};
-
-#define MAX_LISTED_PCI_DEVICES 32
-
-/* List of PCI devices (vendor-id:device-id) that should be skipped */
-static struct edac_pci_device_list pci_blacklist[MAX_LISTED_PCI_DEVICES];
-static int pci_blacklist_count;
-
-/* List of PCI devices (vendor-id:device-id) that should be scanned */
-static struct edac_pci_device_list pci_whitelist[MAX_LISTED_PCI_DEVICES];
-static int pci_whitelist_count ;
-
-#ifndef DISABLE_EDAC_SYSFS
static struct kobject edac_pci_kobj; /* /sys/devices/system/edac/pci */
static struct completion edac_pci_kobj_complete;
-#endif /* DISABLE_EDAC_SYSFS */
#endif /* CONFIG_PCI */
/* START sysfs data and methods */
-#ifndef DISABLE_EDAC_SYSFS
static const char *mem_types[] = {
[MEM_EMPTY] = "Empty",
* /sys/devices/system/edac/mc;
* data structures and methods
*/
-#if 0
-static ssize_t memctrl_string_show(void *ptr, char *buffer)
-{
- char *value = (char*) ptr;
- return sprintf(buffer, "%s\n", value);
-}
-#endif
-
static ssize_t memctrl_int_show(void *ptr, char *buffer)
{
int *value = (int*) ptr;
- return sprintf(buffer, "%d\n", *value);
+ return sprintf(buffer, "%u\n", *value);
}
static ssize_t memctrl_int_store(void *ptr, const char *buffer, size_t count)
.store = _store, \
};
-/* cwrow<id> attribute f*/
-#if 0
-MEMCTRL_STRING_ATTR(mc_version,EDAC_MC_VERSION,S_IRUGO,memctrl_string_show,NULL);
-#endif
-
/* csrow<id> control files */
MEMCTRL_ATTR(panic_on_ue,S_IRUGO|S_IWUSR,memctrl_int_show,memctrl_int_store);
MEMCTRL_ATTR(log_ue,S_IRUGO|S_IWUSR,memctrl_int_show,memctrl_int_store);
.default_attrs = (struct attribute **) memctrl_attr,
};
-#endif /* DISABLE_EDAC_SYSFS */
-
/* Initialize the main sysfs entries for edac:
* /sys/devices/system/edac
*
* !0 FAILURE
*/
static int edac_sysfs_memctrl_setup(void)
-#ifdef DISABLE_EDAC_SYSFS
-{
- return 0;
-}
-#else
{
int err=0;
return err;
}
-#endif /* DISABLE_EDAC_SYSFS */
/*
* MC teardown:
*/
static void edac_sysfs_memctrl_teardown(void)
{
-#ifndef DISABLE_EDAC_SYSFS
debugf0("MC: " __FILE__ ": %s()\n", __func__);
/* Unregister the MC's kobject and wait for reference count to reach
/* Unregister the 'edac' object */
sysdev_class_unregister(&edac_class);
-#endif /* DISABLE_EDAC_SYSFS */
}
#ifdef CONFIG_PCI
-
-#ifndef DISABLE_EDAC_SYSFS
-
-/*
- * /sys/devices/system/edac/pci;
- * data structures and methods
- */
-
-struct list_control {
- struct edac_pci_device_list *list;
- int *count;
-};
-
-#if 0
-/* Output the list as: vendor_id:device:id<,vendor_id:device_id> */
-static ssize_t edac_pci_list_string_show(void *ptr, char *buffer)
-{
- struct list_control *listctl;
- struct edac_pci_device_list *list;
- char *p = buffer;
- int len=0;
- int i;
-
- listctl = ptr;
- list = listctl->list;
-
- for (i = 0; i < *(listctl->count); i++, list++ ) {
- if (len > 0)
- len += snprintf(p + len, (PAGE_SIZE-len), ",");
-
- len += snprintf(p + len,
- (PAGE_SIZE-len),
- "%x:%x",
- list->vendor,list->device);
- }
-
- len += snprintf(p + len,(PAGE_SIZE-len), "\n");
- return (ssize_t) len;
-}
-
-/**
- *
- * Scan string from **s to **e looking for one 'vendor:device' tuple
- * where each field is a hex value
- *
- * return 0 if an entry is NOT found
- * return 1 if an entry is found
- * fill in *vendor_id and *device_id with values found
- *
- * In both cases, make sure *s has been moved forward toward *e
- */
-static int parse_one_device(const char **s,const char **e,
- unsigned int *vendor_id, unsigned int *device_id)
-{
- const char *runner, *p;
-
- /* if null byte, we are done */
- if (!**s) {
- (*s)++; /* keep *s moving */
- return 0;
- }
-
- /* skip over newlines & whitespace */
- if ((**s == '\n') || isspace(**s)) {
- (*s)++;
- return 0;
- }
-
- if (!isxdigit(**s)) {
- (*s)++;
- return 0;
- }
-
- /* parse vendor_id */
- runner = *s;
-
- while (runner < *e) {
- /* scan for vendor:device delimiter */
- if (*runner == ':') {
- *vendor_id = simple_strtol((char*) *s, (char**) &p, 16);
- runner = p + 1;
- break;
- }
-
- runner++;
- }
-
- if (!isxdigit(*runner)) {
- *s = ++runner;
- return 0;
- }
-
- /* parse device_id */
- if (runner < *e) {
- *device_id = simple_strtol((char*)runner, (char**)&p, 16);
- runner = p;
- }
-
- *s = runner;
- return 1;
-}
-
-static ssize_t edac_pci_list_string_store(void *ptr, const char *buffer,
- size_t count)
-{
- struct list_control *listctl;
- struct edac_pci_device_list *list;
- unsigned int vendor_id, device_id;
- const char *s, *e;
- int *index;
-
- s = (char*)buffer;
- e = s + count;
- listctl = ptr;
- list = listctl->list;
- index = listctl->count;
- *index = 0;
-
- while (*index < MAX_LISTED_PCI_DEVICES) {
- if (parse_one_device(&s,&e,&vendor_id,&device_id)) {
- list[ *index ].vendor = vendor_id;
- list[ *index ].device = device_id;
- (*index)++;
- }
-
- /* check for all data consume */
- if (s >= e)
- break;
- }
-
- return count;
-}
-
-#endif
static ssize_t edac_pci_int_show(void *ptr, char *buffer)
{
int *value = ptr;
.store = _store, \
};
-#if 0
-static struct list_control pci_whitelist_control = {
- .list = pci_whitelist,
- .count = &pci_whitelist_count
-};
-
-static struct list_control pci_blacklist_control = {
- .list = pci_blacklist,
- .count = &pci_blacklist_count
-};
-
-/* whitelist attribute */
-EDAC_PCI_STRING_ATTR(pci_parity_whitelist,
- &pci_whitelist_control,
- S_IRUGO|S_IWUSR,
- edac_pci_list_string_show,
- edac_pci_list_string_store);
-
-EDAC_PCI_STRING_ATTR(pci_parity_blacklist,
- &pci_blacklist_control,
- S_IRUGO|S_IWUSR,
- edac_pci_list_string_show,
- edac_pci_list_string_store);
-#endif
-
/* PCI Parity control files */
EDAC_PCI_ATTR(check_pci_parity, S_IRUGO|S_IWUSR, edac_pci_int_show,
edac_pci_int_store);
.default_attrs = (struct attribute **) edac_pci_attr,
};
-#endif /* DISABLE_EDAC_SYSFS */
-
/**
* edac_sysfs_pci_setup()
*
*/
static int edac_sysfs_pci_setup(void)
-#ifdef DISABLE_EDAC_SYSFS
-{
- return 0;
-}
-#else
{
int err;
return err;
}
-#endif /* DISABLE_EDAC_SYSFS */
static void edac_sysfs_pci_teardown(void)
{
-#ifndef DISABLE_EDAC_SYSFS
debugf0("%s()\n", __func__);
init_completion(&edac_pci_kobj_complete);
kobject_unregister(&edac_pci_kobj);
wait_for_completion(&edac_pci_kobj_complete);
-#endif
}
}
}
-/*
- * check_dev_on_list: Scan for a PCI device on a white/black list
- * @list: an EDAC &edac_pci_device_list white/black list pointer
- * @free_index: index of next free entry on the list
- * @pci_dev: PCI Device pointer
- *
- * see if list contains the device.
- *
- * Returns: 0 not found
- * 1 found on list
- */
-static int check_dev_on_list(struct edac_pci_device_list *list,
- int free_index, struct pci_dev *dev)
-{
- int i;
- int rc = 0; /* Assume not found */
- unsigned short vendor=dev->vendor;
- unsigned short device=dev->device;
-
- /* Scan the list, looking for a vendor/device match */
- for (i = 0; i < free_index; i++, list++ ) {
- if ((list->vendor == vendor ) && (list->device == device )) {
- rc = 1;
- break;
- }
- }
-
- return rc;
-}
-
/*
* pci_dev parity list iterator
* Scan the PCI device list for one iteration, looking for SERRORs
* bumped until we are done with it
*/
while((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
- /* if whitelist exists then it has priority, so only scan
- * those devices on the whitelist
- */
- if (pci_whitelist_count > 0 ) {
- if (check_dev_on_list(pci_whitelist,
- pci_whitelist_count, dev))
- fn(dev);
- } else {
- /*
- * if no whitelist, then check if this devices is
- * blacklisted
- */
- if (!check_dev_on_list(pci_blacklist,
- pci_blacklist_count, dev))
- fn(dev);
- }
+ fn(dev);
}
}
#else /* CONFIG_PCI */
-static inline void do_pci_parity_check(void)
-{
- /* no-op */
-}
-
-static inline void clear_pci_parity_errors(void)
-{
- /* no-op */
-}
-
-static void edac_sysfs_pci_teardown(void)
-{
-}
+/* pre-process these away */
+#define do_pci_parity_check()
+#define clear_pci_parity_errors()
+#define edac_sysfs_pci_teardown()
+#define edac_sysfs_pci_setup() (0)
-static int edac_sysfs_pci_setup(void)
-{
- return 0;
-}
#endif /* CONFIG_PCI */
-#ifndef DISABLE_EDAC_SYSFS
-
-/* EDAC sysfs CSROW data structures and methods */
-
-/* Set of more detailed csrow<id> attribute show/store functions */
-static ssize_t csrow_ch0_dimm_label_show(struct csrow_info *csrow, char *data)
-{
- ssize_t size = 0;
-
- if (csrow->nr_channels > 0) {
- size = snprintf(data, EDAC_MC_LABEL_LEN,"%s\n",
- csrow->channels[0].label);
- }
-
- return size;
-}
+/* EDAC sysfs CSROW data structures and methods
+ */
-static ssize_t csrow_ch1_dimm_label_show(struct csrow_info *csrow, char *data)
+/* Set of more default csrow<id> attribute show/store functions */
+static ssize_t csrow_ue_count_show(struct csrow_info *csrow, char *data, int private)
{
- ssize_t size = 0;
-
- if (csrow->nr_channels > 0) {
- size = snprintf(data, EDAC_MC_LABEL_LEN, "%s\n",
- csrow->channels[1].label);
- }
-
- return size;
+ return sprintf(data,"%u\n", csrow->ue_count);
}
-static ssize_t csrow_ch0_dimm_label_store(struct csrow_info *csrow,
- const char *data, size_t size)
+static ssize_t csrow_ce_count_show(struct csrow_info *csrow, char *data, int private)
{
- ssize_t max_size = 0;
-
- if (csrow->nr_channels > 0) {
- max_size = min((ssize_t)size,(ssize_t)EDAC_MC_LABEL_LEN-1);
- strncpy(csrow->channels[0].label, data, max_size);
- csrow->channels[0].label[max_size] = '\0';
- }
-
- return size;
+ return sprintf(data,"%u\n", csrow->ce_count);
}
-static ssize_t csrow_ch1_dimm_label_store(struct csrow_info *csrow,
- const char *data, size_t size)
+static ssize_t csrow_size_show(struct csrow_info *csrow, char *data, int private)
{
- ssize_t max_size = 0;
-
- if (csrow->nr_channels > 1) {
- max_size = min((ssize_t)size,(ssize_t)EDAC_MC_LABEL_LEN-1);
- strncpy(csrow->channels[1].label, data, max_size);
- csrow->channels[1].label[max_size] = '\0';
- }
-
- return max_size;
+ return sprintf(data,"%u\n", PAGES_TO_MiB(csrow->nr_pages));
}
-static ssize_t csrow_ue_count_show(struct csrow_info *csrow, char *data)
+static ssize_t csrow_mem_type_show(struct csrow_info *csrow, char *data, int private)
{
- return sprintf(data,"%u\n", csrow->ue_count);
+ return sprintf(data,"%s\n", mem_types[csrow->mtype]);
}
-static ssize_t csrow_ce_count_show(struct csrow_info *csrow, char *data)
+static ssize_t csrow_dev_type_show(struct csrow_info *csrow, char *data, int private)
{
- return sprintf(data,"%u\n", csrow->ce_count);
+ return sprintf(data,"%s\n", dev_types[csrow->dtype]);
}
-static ssize_t csrow_ch0_ce_count_show(struct csrow_info *csrow, char *data)
+static ssize_t csrow_edac_mode_show(struct csrow_info *csrow, char *data, int private)
{
- ssize_t size = 0;
-
- if (csrow->nr_channels > 0) {
- size = sprintf(data,"%u\n", csrow->channels[0].ce_count);
- }
-
- return size;
+ return sprintf(data,"%s\n", edac_caps[csrow->edac_mode]);
}
-static ssize_t csrow_ch1_ce_count_show(struct csrow_info *csrow, char *data)
+/* show/store functions for DIMM Label attributes */
+static ssize_t channel_dimm_label_show(struct csrow_info *csrow,
+ char *data, int channel)
{
- ssize_t size = 0;
-
- if (csrow->nr_channels > 1) {
- size = sprintf(data,"%u\n", csrow->channels[1].ce_count);
- }
-
- return size;
+ return snprintf(data, EDAC_MC_LABEL_LEN,"%s",
+ csrow->channels[channel].label);
}
-static ssize_t csrow_size_show(struct csrow_info *csrow, char *data)
+static ssize_t channel_dimm_label_store(struct csrow_info *csrow,
+ const char *data,
+ size_t count,
+ int channel)
{
- return sprintf(data,"%u\n", PAGES_TO_MiB(csrow->nr_pages));
-}
+ ssize_t max_size = 0;
-static ssize_t csrow_mem_type_show(struct csrow_info *csrow, char *data)
-{
- return sprintf(data,"%s\n", mem_types[csrow->mtype]);
-}
+ max_size = min((ssize_t)count,(ssize_t)EDAC_MC_LABEL_LEN-1);
+ strncpy(csrow->channels[channel].label, data, max_size);
+ csrow->channels[channel].label[max_size] = '\0';
-static ssize_t csrow_dev_type_show(struct csrow_info *csrow, char *data)
-{
- return sprintf(data,"%s\n", dev_types[csrow->dtype]);
+ return max_size;
}
-static ssize_t csrow_edac_mode_show(struct csrow_info *csrow, char *data)
+/* show function for dynamic chX_ce_count attribute */
+static ssize_t channel_ce_count_show(struct csrow_info *csrow,
+ char *data,
+ int channel)
{
- return sprintf(data,"%s\n", edac_caps[csrow->edac_mode]);
+ return sprintf(data, "%u\n", csrow->channels[channel].ce_count);
}
+/* csrow specific attribute structure */
struct csrowdev_attribute {
struct attribute attr;
- ssize_t (*show)(struct csrow_info *,char *);
- ssize_t (*store)(struct csrow_info *, const char *,size_t);
+ ssize_t (*show)(struct csrow_info *,char *,int);
+ ssize_t (*store)(struct csrow_info *, const char *,size_t,int);
+ int private;
};
#define to_csrow(k) container_of(k, struct csrow_info, kobj)
#define to_csrowdev_attr(a) container_of(a, struct csrowdev_attribute, attr)
-/* Set of show/store higher level functions for csrow objects */
-static ssize_t csrowdev_show(struct kobject *kobj, struct attribute *attr,
- char *buffer)
+/* Set of show/store higher level functions for default csrow attributes */
+static ssize_t csrowdev_show(struct kobject *kobj,
+ struct attribute *attr,
+ char *buffer)
{
struct csrow_info *csrow = to_csrow(kobj);
struct csrowdev_attribute *csrowdev_attr = to_csrowdev_attr(attr);
if (csrowdev_attr->show)
- return csrowdev_attr->show(csrow, buffer);
-
+ return csrowdev_attr->show(csrow,
+ buffer,
+ csrowdev_attr->private);
return -EIO;
}
struct csrowdev_attribute * csrowdev_attr = to_csrowdev_attr(attr);
if (csrowdev_attr->store)
- return csrowdev_attr->store(csrow, buffer, count);
-
+ return csrowdev_attr->store(csrow,
+ buffer,
+ count,
+ csrowdev_attr->private);
return -EIO;
}
.store = csrowdev_store
};
-#define CSROWDEV_ATTR(_name,_mode,_show,_store) \
+#define CSROWDEV_ATTR(_name,_mode,_show,_store,_private) \
struct csrowdev_attribute attr_##_name = { \
.attr = {.name = __stringify(_name), .mode = _mode }, \
.show = _show, \
.store = _store, \
+ .private = _private, \
};
-/* cwrow<id>/attribute files */
-CSROWDEV_ATTR(size_mb,S_IRUGO,csrow_size_show,NULL);
-CSROWDEV_ATTR(dev_type,S_IRUGO,csrow_dev_type_show,NULL);
-CSROWDEV_ATTR(mem_type,S_IRUGO,csrow_mem_type_show,NULL);
-CSROWDEV_ATTR(edac_mode,S_IRUGO,csrow_edac_mode_show,NULL);
-CSROWDEV_ATTR(ue_count,S_IRUGO,csrow_ue_count_show,NULL);
-CSROWDEV_ATTR(ce_count,S_IRUGO,csrow_ce_count_show,NULL);
-CSROWDEV_ATTR(ch0_ce_count,S_IRUGO,csrow_ch0_ce_count_show,NULL);
-CSROWDEV_ATTR(ch1_ce_count,S_IRUGO,csrow_ch1_ce_count_show,NULL);
-
-/* control/attribute files */
-CSROWDEV_ATTR(ch0_dimm_label,S_IRUGO|S_IWUSR,
- csrow_ch0_dimm_label_show,
- csrow_ch0_dimm_label_store);
-CSROWDEV_ATTR(ch1_dimm_label,S_IRUGO|S_IWUSR,
- csrow_ch1_dimm_label_show,
- csrow_ch1_dimm_label_store);
+/* default cwrow<id>/attribute files */
+CSROWDEV_ATTR(size_mb,S_IRUGO,csrow_size_show,NULL,0);
+CSROWDEV_ATTR(dev_type,S_IRUGO,csrow_dev_type_show,NULL,0);
+CSROWDEV_ATTR(mem_type,S_IRUGO,csrow_mem_type_show,NULL,0);
+CSROWDEV_ATTR(edac_mode,S_IRUGO,csrow_edac_mode_show,NULL,0);
+CSROWDEV_ATTR(ue_count,S_IRUGO,csrow_ue_count_show,NULL,0);
+CSROWDEV_ATTR(ce_count,S_IRUGO,csrow_ce_count_show,NULL,0);
-/* Attributes of the CSROW<id> object */
-static struct csrowdev_attribute *csrow_attr[] = {
+/* default attributes of the CSROW<id> object */
+static struct csrowdev_attribute *default_csrow_attr[] = {
&attr_dev_type,
&attr_mem_type,
&attr_edac_mode,
&attr_size_mb,
&attr_ue_count,
&attr_ce_count,
- &attr_ch0_ce_count,
- &attr_ch1_ce_count,
- &attr_ch0_dimm_label,
- &attr_ch1_dimm_label,
NULL,
};
-/* No memory to release */
+
+/* possible dynamic channel DIMM Label attribute files */
+CSROWDEV_ATTR(ch0_dimm_label,S_IRUGO|S_IWUSR,
+ channel_dimm_label_show,
+ channel_dimm_label_store,
+ 0 );
+CSROWDEV_ATTR(ch1_dimm_label,S_IRUGO|S_IWUSR,
+ channel_dimm_label_show,
+ channel_dimm_label_store,
+ 1 );
+CSROWDEV_ATTR(ch2_dimm_label,S_IRUGO|S_IWUSR,
+ channel_dimm_label_show,
+ channel_dimm_label_store,
+ 2 );
+CSROWDEV_ATTR(ch3_dimm_label,S_IRUGO|S_IWUSR,
+ channel_dimm_label_show,
+ channel_dimm_label_store,
+ 3 );
+CSROWDEV_ATTR(ch4_dimm_label,S_IRUGO|S_IWUSR,
+ channel_dimm_label_show,
+ channel_dimm_label_store,
+ 4 );
+CSROWDEV_ATTR(ch5_dimm_label,S_IRUGO|S_IWUSR,
+ channel_dimm_label_show,
+ channel_dimm_label_store,
+ 5 );
+
+/* Total possible dynamic DIMM Label attribute file table */
+static struct csrowdev_attribute *dynamic_csrow_dimm_attr[] = {
+ &attr_ch0_dimm_label,
+ &attr_ch1_dimm_label,
+ &attr_ch2_dimm_label,
+ &attr_ch3_dimm_label,
+ &attr_ch4_dimm_label,
+ &attr_ch5_dimm_label
+};
+
+/* possible dynamic channel ce_count attribute files */
+CSROWDEV_ATTR(ch0_ce_count,S_IRUGO|S_IWUSR,
+ channel_ce_count_show,
+ NULL,
+ 0 );
+CSROWDEV_ATTR(ch1_ce_count,S_IRUGO|S_IWUSR,
+ channel_ce_count_show,
+ NULL,
+ 1 );
+CSROWDEV_ATTR(ch2_ce_count,S_IRUGO|S_IWUSR,
+ channel_ce_count_show,
+ NULL,
+ 2 );
+CSROWDEV_ATTR(ch3_ce_count,S_IRUGO|S_IWUSR,
+ channel_ce_count_show,
+ NULL,
+ 3 );
+CSROWDEV_ATTR(ch4_ce_count,S_IRUGO|S_IWUSR,
+ channel_ce_count_show,
+ NULL,
+ 4 );
+CSROWDEV_ATTR(ch5_ce_count,S_IRUGO|S_IWUSR,
+ channel_ce_count_show,
+ NULL,
+ 5 );
+
+/* Total possible dynamic ce_count attribute file table */
+static struct csrowdev_attribute *dynamic_csrow_ce_count_attr[] = {
+ &attr_ch0_ce_count,
+ &attr_ch1_ce_count,
+ &attr_ch2_ce_count,
+ &attr_ch3_ce_count,
+ &attr_ch4_ce_count,
+ &attr_ch5_ce_count
+};
+
+
+#define EDAC_NR_CHANNELS 6
+
+/* Create dynamic CHANNEL files, indexed by 'chan', under specifed CSROW */
+static int edac_create_channel_files(struct kobject *kobj, int chan)
+{
+ int err=-ENODEV;
+
+ if (chan >= EDAC_NR_CHANNELS)
+ return err;
+
+ /* create the DIMM label attribute file */
+ err = sysfs_create_file(kobj,
+ (struct attribute *) dynamic_csrow_dimm_attr[chan]);
+
+ if (!err) {
+ /* create the CE Count attribute file */
+ err = sysfs_create_file(kobj,
+ (struct attribute *) dynamic_csrow_ce_count_attr[chan]);
+ } else {
+ debugf1("%s() dimm labels and ce_count files created", __func__);
+ }
+
+ return err;
+}
+
+/* No memory to release for this kobj */
static void edac_csrow_instance_release(struct kobject *kobj)
{
struct csrow_info *cs;
- debugf1("%s()\n", __func__);
cs = container_of(kobj, struct csrow_info, kobj);
complete(&cs->kobj_complete);
}
+/* the kobj_type instance for a CSROW */
static struct kobj_type ktype_csrow = {
.release = edac_csrow_instance_release,
.sysfs_ops = &csrowfs_ops,
- .default_attrs = (struct attribute **) csrow_attr,
+ .default_attrs = (struct attribute **) default_csrow_attr,
};
/* Create a CSROW object under specifed edac_mc_device */
-static int edac_create_csrow_object(struct kobject *edac_mci_kobj,
- struct csrow_info *csrow, int index)
+static int edac_create_csrow_object(
+ struct kobject *edac_mci_kobj,
+ struct csrow_info *csrow,
+ int index)
{
int err = 0;
+ int chan;
- debugf0("%s()\n", __func__);
memset(&csrow->kobj, 0, sizeof(csrow->kobj));
/* generate ..../edac/mc/mc<id>/csrow<index> */
/* name this instance of csrow<id> */
err = kobject_set_name(&csrow->kobj,"csrow%d",index);
+ if (err)
+ goto error_exit;
+ /* Instanstiate the csrow object */
+ err = kobject_register(&csrow->kobj);
if (!err) {
- /* Instanstiate the csrow object */
- err = kobject_register(&csrow->kobj);
-
- if (err)
- debugf0("Failed to register CSROW%d\n",index);
- else
- debugf0("Registered CSROW%d\n",index);
+ /* Create the dyanmic attribute files on this csrow,
+ * namely, the DIMM labels and the channel ce_count
+ */
+ for (chan = 0; chan < csrow->nr_channels; chan++) {
+ err = edac_create_channel_files(&csrow->kobj,chan);
+ if (err)
+ break;
+ }
}
+error_exit:
return err;
}
-/* sysfs data structures and methods for the MCI kobjects */
+/* default sysfs methods and data structures for the main MCI kobject */
static ssize_t mci_reset_counters_store(struct mem_ctl_info *mci,
const char *data, size_t count)
return count;
}
+/* default attribute files for the MCI object */
static ssize_t mci_ue_count_show(struct mem_ctl_info *mci, char *data)
{
return sprintf(data,"%d\n", mci->ue_count);
return sprintf(data,"%ld\n", (jiffies - mci->start_time) / HZ);
}
-static ssize_t mci_mod_name_show(struct mem_ctl_info *mci, char *data)
-{
- return sprintf(data,"%s %s\n", mci->mod_name, mci->mod_ver);
-}
-
static ssize_t mci_ctl_name_show(struct mem_ctl_info *mci, char *data)
{
return sprintf(data,"%s\n", mci->ctl_name);
}
-static int mci_output_edac_cap(char *buf, unsigned long edac_cap)
-{
- char *p = buf;
- int bit_idx;
-
- for (bit_idx = 0; bit_idx < 8 * sizeof(edac_cap); bit_idx++) {
- if ((edac_cap >> bit_idx) & 0x1)
- p += sprintf(p, "%s ", edac_caps[bit_idx]);
- }
-
- return p - buf;
-}
-
-static ssize_t mci_edac_capability_show(struct mem_ctl_info *mci, char *data)
-{
- char *p = data;
-
- p += mci_output_edac_cap(p,mci->edac_ctl_cap);
- p += sprintf(p, "\n");
- return p - data;
-}
-
-static ssize_t mci_edac_current_capability_show(struct mem_ctl_info *mci,
- char *data)
-{
- char *p = data;
-
- p += mci_output_edac_cap(p,mci->edac_cap);
- p += sprintf(p, "\n");
- return p - data;
-}
-
-static int mci_output_mtype_cap(char *buf, unsigned long mtype_cap)
-{
- char *p = buf;
- int bit_idx;
-
- for (bit_idx = 0; bit_idx < 8 * sizeof(mtype_cap); bit_idx++) {
- if ((mtype_cap >> bit_idx) & 0x1)
- p += sprintf(p, "%s ", mem_types[bit_idx]);
- }
-
- return p - buf;
-}
-
-static ssize_t mci_supported_mem_type_show(struct mem_ctl_info *mci,
- char *data)
-{
- char *p = data;
-
- p += mci_output_mtype_cap(p,mci->mtype_cap);
- p += sprintf(p, "\n");
- return p - data;
-}
-
static ssize_t mci_size_mb_show(struct mem_ctl_info *mci, char *data)
{
int total_pages, csrow_idx;
#define to_mci(k) container_of(k, struct mem_ctl_info, edac_mci_kobj)
#define to_mcidev_attr(a) container_of(a, struct mcidev_attribute, attr)
+/* MCI show/store functions for top most object */
static ssize_t mcidev_show(struct kobject *kobj, struct attribute *attr,
char *buffer)
{
.store = _store, \
};
-/* Control file */
+/* default Control file */
MCIDEV_ATTR(reset_counters,S_IWUSR,NULL,mci_reset_counters_store);
-/* Attribute files */
+/* default Attribute files */
MCIDEV_ATTR(mc_name,S_IRUGO,mci_ctl_name_show,NULL);
-MCIDEV_ATTR(module_name,S_IRUGO,mci_mod_name_show,NULL);
-MCIDEV_ATTR(edac_capability,S_IRUGO,mci_edac_capability_show,NULL);
MCIDEV_ATTR(size_mb,S_IRUGO,mci_size_mb_show,NULL);
MCIDEV_ATTR(seconds_since_reset,S_IRUGO,mci_seconds_show,NULL);
MCIDEV_ATTR(ue_noinfo_count,S_IRUGO,mci_ue_noinfo_show,NULL);
MCIDEV_ATTR(ce_noinfo_count,S_IRUGO,mci_ce_noinfo_show,NULL);
MCIDEV_ATTR(ue_count,S_IRUGO,mci_ue_count_show,NULL);
MCIDEV_ATTR(ce_count,S_IRUGO,mci_ce_count_show,NULL);
-MCIDEV_ATTR(edac_current_capability,S_IRUGO,
- mci_edac_current_capability_show,NULL);
-MCIDEV_ATTR(supported_mem_type,S_IRUGO,
- mci_supported_mem_type_show,NULL);
static struct mcidev_attribute *mci_attr[] = {
&mci_attr_reset_counters,
- &mci_attr_module_name,
&mci_attr_mc_name,
- &mci_attr_edac_capability,
- &mci_attr_edac_current_capability,
- &mci_attr_supported_mem_type,
&mci_attr_size_mb,
&mci_attr_seconds_since_reset,
&mci_attr_ue_noinfo_count,
.default_attrs = (struct attribute **) mci_attr,
};
-#endif /* DISABLE_EDAC_SYSFS */
#define EDAC_DEVICE_SYMLINK "device"
* !0 Failure
*/
static int edac_create_sysfs_mci_device(struct mem_ctl_info *mci)
-#ifdef DISABLE_EDAC_SYSFS
-{
- return 0;
-}
-#else
{
int i;
int err;
/* set the name of the mc<id> object */
err = kobject_set_name(edac_mci_kobj,"mc%d",mci->mc_idx);
-
if (err)
return err;
/* register the mc<id> kobject */
err = kobject_register(edac_mci_kobj);
-
if (err)
return err;
/* create a symlink for the device */
err = sysfs_create_link(edac_mci_kobj, &mci->dev->kobj,
EDAC_DEVICE_SYMLINK);
-
if (err)
goto fail0;
/* Only expose populated CSROWs */
if (csrow->nr_pages > 0) {
err = edac_create_csrow_object(edac_mci_kobj,csrow,i);
-
if (err)
goto fail1;
}
wait_for_completion(&mci->kobj_complete);
return err;
}
-#endif /* DISABLE_EDAC_SYSFS */
/*
* remove a Memory Controller instance
*/
static void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci)
{
-#ifndef DISABLE_EDAC_SYSFS
int i;
debugf0("%s()\n", __func__);
init_completion(&mci->kobj_complete);
kobject_unregister(&mci->edac_mci_kobj);
wait_for_completion(&mci->kobj_complete);
-#endif /* DISABLE_EDAC_SYSFS */
}
/* END OF sysfs data and methods */
static int force;
module_param(force, bool, 0);
MODULE_PARM_DESC(force, "Set to one to force detection.");
+static int bank1_types[ABIT_UGURU_MAX_BANK1_SENSORS] = { -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 };
+module_param_array(bank1_types, int, NULL, 0);
+MODULE_PARM_DESC(bank1_types, "Bank1 sensortype autodetection override:\n"
+ " -1 autodetect\n"
+ " 0 volt sensor\n"
+ " 1 temp sensor\n"
+ " 2 not connected");
static int fan_sensors;
module_param(fan_sensors, int, 0);
MODULE_PARM_DESC(fan_sensors, "Number of fan sensors on the uGuru "
u8 val, buf[3];
int ret = ABIT_UGURU_NC;
+ /* If overriden by the user return the user selected type */
+ if (bank1_types[sensor_addr] >= ABIT_UGURU_IN_SENSOR &&
+ bank1_types[sensor_addr] <= ABIT_UGURU_NC) {
+ ABIT_UGURU_DEBUG(2, "assuming sensor type %d for bank1 sensor "
+ "%d because of \"bank1_types\" module param\n",
+ bank1_types[sensor_addr], (int)sensor_addr);
+ return bank1_types[sensor_addr];
+ }
+
/* First read the sensor and the current settings */
if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK1, sensor_addr, &val,
1, ABIT_UGURU_MAX_RETRIES) != 1)
{
int i;
- if (fan_sensors) {
+ if (fan_sensors > 0 && fan_sensors <= ABIT_UGURU_MAX_BANK2_SENSORS) {
data->bank2_sensors = fan_sensors;
ABIT_UGURU_DEBUG(2, "assuming %d fan sensors because of "
"\"fan_sensors\" module param\n",
{
int i, j;
- if (pwms) {
+ if (pwms > 0 && pwms <= ABIT_UGURU_MAX_PWMS) {
data->pwms = pwms;
ABIT_UGURU_DEBUG(2, "assuming %d PWM outputs because of "
"\"pwms\" module param\n", (int)data->pwms);
while (count > 0) {
inval = i2c_inb(i2c_adap);
-/*printk("%#02x ",inval); if ( ! (count % 16) ) printk("\n"); */
if (inval>=0) {
*temp = inval;
rdcount++;
adap->timeout = 100; /* default values, should */
adap->retries = 3; /* be replaced by defines */
- i2c_add_adapter(adap);
- return 0;
+ return i2c_add_adapter(adap);
}
adap->retries = 3; /* be replaced by defines */
adap->flags = 0;
- i2c_add_adapter(adap);
iic_init(iic_adap);
-
- return 0;
+ return i2c_add_adapter(adap);
}
adap->timeout = 100; /* default values, should */
adap->retries = 3; /* be replaced by defines */
- rval = pca_init(pca_adap);
+ if ((rval = pca_init(pca_adap)))
+ return rval;
- if (!rval)
- i2c_add_adapter(adap);
+ rval = i2c_add_adapter(adap);
return rval;
}
adap->timeout = 100; /* default values, should */
adap->retries = 3; /* be replaced by defines */
- rval = pcf_init_8584(pcf_adap);
- if (!rval)
- i2c_add_adapter(adap);
+ if ((rval = pcf_init_8584(pcf_adap)))
+ return rval;
+
+ rval = i2c_add_adapter(adap);
+
return rval;
}
printk("\n");
}
- i2c_add_adapter(i2c_adap);
-
- return 0;
+ return i2c_add_adapter(i2c_adap);
}
* - Make it work with IXP46x chips
* - Cleanup function names, coding style, etc
*
+ * - writing to slave address causes latchup on iop331.
+ * fix: driver refuses to address self.
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, version 2.
__raw_writel(0, iop3xx_adap->ioaddr + CR_OFFSET);
}
-static void
-iop3xx_i2c_set_slave_addr(struct i2c_algo_iop3xx_data *iop3xx_adap)
-{
- __raw_writel(MYSAR, iop3xx_adap->ioaddr + SAR_OFFSET);
-}
-
static void
iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
{
int status;
int rc;
+ /* avoid writing to my slave address (hangs on 80331),
+ * forbidden in Intel developer manual
+ */
+ if (msg->addr == MYSAR) {
+ return -EBUSY;
+ }
+
__raw_writel(iic_cook_addr(msg), iop3xx_adap->ioaddr + DBR_OFFSET);
cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK);
spin_lock_init(&adapter_data->lock);
iop3xx_i2c_reset(adapter_data);
- iop3xx_i2c_set_slave_addr(adapter_data);
iop3xx_i2c_enable(adapter_data);
platform_set_drvdata(pdev, new_adapter);
#define IOP3XX_GPOD_I2C0 0x00c0 /* clear these bits to enable ch0 */
#define IOP3XX_GPOD_I2C1 0x0030 /* clear these bits to enable ch1 */
-#define MYSAR 0x02 /* SWAG a suitable slave address */
+#define MYSAR 0 /* default slave address */
#define I2C_ERR 321
#define I2C_ERR_BERR (I2C_ERR+0)
int read;
int addrdir;
- if (num != 1)
- return -EINVAL;
if (msgs->flags & I2C_M_TEN)
return -EINVAL;
read = (msgs->flags & I2C_M_RD) != 0;
rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
bail:
pmac_i2c_close(bus);
- return rc < 0 ? rc : msgs->len;
+ return rc < 0 ? rc : 1;
}
static u32 i2c_powermac_func(struct i2c_adapter * adapter)
break;
case state_read:
- /* Set ACK if receiving the last byte */
- if (iface->len == 1)
+ /* Set ACK if _next_ byte will be the last one */
+ if (iface->len == 2)
outb(inb(ACBCTL1) | ACBCTL1_ACK, ACBCTL1);
else
outb(inb(ACBCTL1) & ~ACBCTL1_ACK, ACBCTL1);
- *iface->ptr++ = inb(ACBSDA);
- --iface->len;
-
- if (iface->len == 0) {
+ if (iface->len == 1) {
iface->result = 0;
iface->state = state_idle;
outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
}
+ *iface->ptr++ = inb(ACBSDA);
+ --iface->len;
+
break;
case state_write:
buffer = (u8 *)&cur_word;
break;
- case I2C_SMBUS_BLOCK_DATA:
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ if (rw == I2C_SMBUS_READ)
+ data->block[0] = I2C_SMBUS_BLOCK_MAX; /* For now */
len = data->block[0];
+ if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
+ return -EINVAL;
buffer = &data->block[1];
break;
{
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
- I2C_FUNC_SMBUS_BLOCK_DATA;
+ I2C_FUNC_SMBUS_I2C_BLOCK;
}
/* For now, we only handle combined mode (smbus) */
new_client->driver = &pca9539_driver;
new_client->flags = 0;
- /* Detection: the pca9539 only has 8 registers (0-7).
- A read of 7 should succeed, but a read of 8 should fail. */
- if ((i2c_smbus_read_byte_data(new_client, 7) < 0) ||
- (i2c_smbus_read_byte_data(new_client, 8) >= 0))
- goto exit_kfree;
+ if (kind < 0) {
+ /* Detection: the pca9539 only has 8 registers (0-7).
+ A read of 7 should succeed, but a read of 8 should fail. */
+ if ((i2c_smbus_read_byte_data(new_client, 7) < 0) ||
+ (i2c_smbus_read_byte_data(new_client, 8) >= 0))
+ goto exit_kfree;
+ }
strlcpy(new_client->name, "pca9539", I2C_NAME_SIZE);
"parameter for adapter %d, "
"addr 0x%02x\n", adap_id,
address_data->ignore[j + 1]);
+ ignore = 1;
+ break;
}
- ignore = 1;
- break;
}
if (ignore)
continue;
kfree(link->priv);
} /* ide_detach */
-static void idecs_mmio_fixup(ide_hwif_t *hwif)
-{
- default_hwif_mmiops(hwif);
- hwif->mmio = 2;
-
- ide_undecoded_slave(hwif);
-}
-
-static int idecs_register(unsigned long io, unsigned long ctl,
- unsigned long irq, struct pcmcia_device *handle, int is_mmio)
+static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle)
{
hw_regs_t hw;
memset(&hw, 0, sizeof(hw));
hw.irq = irq;
hw.chipset = ide_pci;
hw.dev = &handle->dev;
-
- if(is_mmio)
- return ide_register_hw_with_fixup(&hw, NULL, idecs_mmio_fixup);
- else
- return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave);
-}
-
-void outb_io(unsigned char value, unsigned long port) {
- outb(value, port);
-}
-
-void outb_mem(unsigned char value, unsigned long port) {
- writeb(value, (void __iomem *) port);
+ return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave);
}
/*======================================================================
} *stk = NULL;
cistpl_cftable_entry_t *cfg;
int i, pass, last_ret = 0, last_fn = 0, hd, is_kme = 0;
- unsigned long io_base, ctl_base, is_mmio, try_slave;
- void (*my_outb)(unsigned char, unsigned long);
+ unsigned long io_base, ctl_base;
DEBUG(0, "ide_config(0x%p)\n", link);
/* Not sure if this is right... look up the current Vcc */
CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &stk->conf));
- pass = io_base = ctl_base = is_mmio = try_slave = 0;
+ pass = io_base = ctl_base = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
tuple.Attributes = 0;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
goto next_entry;
io_base = link->io.BasePort1;
ctl_base = link->io.BasePort1 + 0x0e;
-
- if (io->win[0].len >= 0x20)
- try_slave = 1;
-
} else goto next_entry;
/* If we've got this far, we're done */
break;
}
- if ((cfg->mem.nwin > 0) || (stk->dflt.mem.nwin > 0)) {
- win_req_t req;
- memreq_t map;
- cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &stk->dflt.mem;
-
- if (mem->win[0].len < 16)
- goto next_entry;
-
- req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
- req.Attributes |= WIN_ENABLE;
- req.Base = mem->win[0].host_addr;
- req.Size = 0;
-
- req.AccessSpeed = 0;
- if (pcmcia_request_window(&link, &req, &link->win) != 0)
- goto next_entry;
- map.Page = 0; map.CardOffset = mem->win[0].card_addr;
- if (pcmcia_map_mem_page(link->win, &map) != 0)
- goto next_entry;
-
- io_base = (unsigned long) ioremap(req.Base, req.Size);
- ctl_base = io_base + 0x0e;
- is_mmio = 1;
-
- if (mem->win[0].len >= 0x20)
- try_slave = 1;
-
- break;
- }
-
next_entry:
if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
memcpy(&stk->dflt, cfg, sizeof(stk->dflt));
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
- if(is_mmio)
- my_outb = outb_mem;
- else
- my_outb = outb_io;
-
/* disable drive interrupts during IDE probe */
- my_outb(0x02, ctl_base);
+ outb(0x02, ctl_base);
/* special setup for KXLC005 card */
if (is_kme)
- my_outb(0x81, ctl_base+1);
+ outb(0x81, ctl_base+1);
/* retry registration in case device is still spinning up */
for (hd = -1, i = 0; i < 10; i++) {
- hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link, is_mmio);
+ hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
if (hd >= 0) break;
- if (try_slave) {
- my_outb(0x02, ctl_base + 0x10);
+ if (link->io.NumPorts1 == 0x20) {
+ outb(0x02, ctl_base + 0x10);
hd = idecs_register(io_base + 0x10, ctl_base + 0x10,
- link->irq.AssignedIRQ, link, is_mmio);
+ link->irq.AssignedIRQ, link);
if (hd >= 0) {
io_base += 0x10;
ctl_base += 0x10;
(!(PCI_FUNC(dev->devfn) & 1)))
goto out;
+ if (dev->vendor == PCI_VENDOR_ID_JMICRON && PCI_FUNC(dev->devfn) != 1)
+ goto out;
+
pci_read_config_word(dev, PCI_COMMAND, &command);
if (!(command & PCI_COMMAND_IO)) {
printk(KERN_INFO "Skipping disabled %s IDE controller.\n", d->name);
{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12},
{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13},
{ PCI_VENDOR_ID_NETCELL,PCI_DEVICE_ID_REVOLUTION, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14},
+ { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15},
+ { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16},
+ { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17},
+ { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 18},
+ { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19},
/* Must come last. If you add entries adjust this table appropriately and the init_one code */
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 0},
{ 0, },
}
}
-void ib_destroy_cm_id(struct ib_cm_id *cm_id)
+static void cm_destroy_id(struct ib_cm_id *cm_id, int err)
{
struct cm_id_private *cm_id_priv;
struct cm_work *work;
sizeof cm_id_priv->av.port->cm_dev->ca_guid,
NULL, 0);
break;
+ case IB_CM_REQ_RCVD:
+ if (err == -ENOMEM) {
+ /* Do not reject to allow future retries. */
+ cm_reset_to_idle(cm_id_priv);
+ spin_unlock_irqrestore(&cm_id_priv->lock, flags);
+ } else {
+ spin_unlock_irqrestore(&cm_id_priv->lock, flags);
+ ib_send_cm_rej(cm_id, IB_CM_REJ_CONSUMER_DEFINED,
+ NULL, 0, NULL, 0);
+ }
+ break;
case IB_CM_MRA_REQ_RCVD:
case IB_CM_REP_SENT:
case IB_CM_MRA_REP_RCVD:
ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg);
/* Fall through */
- case IB_CM_REQ_RCVD:
case IB_CM_MRA_REQ_SENT:
case IB_CM_REP_RCVD:
case IB_CM_MRA_REP_SENT:
kfree(cm_id_priv->private_data);
kfree(cm_id_priv);
}
+
+void ib_destroy_cm_id(struct ib_cm_id *cm_id)
+{
+ cm_destroy_id(cm_id, 0);
+}
EXPORT_SYMBOL(ib_destroy_cm_id);
int ib_cm_listen(struct ib_cm_id *cm_id, __be64 service_id, __be64 service_mask,
}
cm_deref_id(cm_id_priv);
if (ret)
- ib_destroy_cm_id(&cm_id_priv->id);
+ cm_destroy_id(&cm_id_priv->id, ret);
}
static void cm_format_mra(struct cm_mra_msg *mra_msg,
static int cma_acquire_ib_dev(struct rdma_id_private *id_priv)
{
struct cma_device *cma_dev;
- union ib_gid *gid;
+ union ib_gid gid;
int ret = -ENODEV;
- gid = ib_addr_get_sgid(&id_priv->id.route.addr.dev_addr);
+ ib_addr_get_sgid(&id_priv->id.route.addr.dev_addr, &gid),
mutex_lock(&lock);
list_for_each_entry(cma_dev, &dev_list, list) {
- ret = ib_find_cached_gid(cma_dev->device, gid,
+ ret = ib_find_cached_gid(cma_dev->device, &gid,
&id_priv->id.port_num, NULL);
if (!ret) {
cma_attach_to_dev(id_priv, cma_dev);
cma_modify_qp_err(&id_priv->id);
status = ib_event->param.rej_rcvd.reason;
event = RDMA_CM_EVENT_REJECTED;
+ private_data_len = IB_CM_REJ_PRIVATE_DATA_SIZE;
break;
default:
printk(KERN_ERR "RDMA CMA: unexpected IB CM event: %d",
struct ib_sa_path_rec path_rec;
memset(&path_rec, 0, sizeof path_rec);
- path_rec.sgid = *ib_addr_get_sgid(addr);
- path_rec.dgid = *ib_addr_get_dgid(addr);
+ ib_addr_get_sgid(addr, &path_rec.sgid);
+ ib_addr_get_dgid(addr, &path_rec.dgid);
path_rec.pkey = cpu_to_be16(ib_addr_get_pkey(addr));
path_rec.numb_path = 1;
{
struct cma_device *cma_dev;
struct ib_port_attr port_attr;
- union ib_gid *gid;
+ union ib_gid gid;
u16 pkey;
int ret;
u8 p;
}
port_found:
- gid = ib_addr_get_sgid(&id_priv->id.route.addr.dev_addr);
- ret = ib_get_cached_gid(cma_dev->device, p, 0, gid);
+ ret = ib_get_cached_gid(cma_dev->device, p, 0, &gid);
if (ret)
goto out;
if (ret)
goto out;
+ ib_addr_set_sgid(&id_priv->id.route.addr.dev_addr, &gid);
ib_addr_set_pkey(&id_priv->id.route.addr.dev_addr, pkey);
id_priv->id.port_num = p;
cma_attach_to_dev(id_priv, cma_dev);
{
struct cma_work *work;
struct sockaddr_in *src_in, *dst_in;
+ union ib_gid gid;
int ret;
work = kzalloc(sizeof *work, GFP_KERNEL);
goto err;
}
- ib_addr_set_dgid(&id_priv->id.route.addr.dev_addr,
- ib_addr_get_sgid(&id_priv->id.route.addr.dev_addr));
+ ib_addr_get_sgid(&id_priv->id.route.addr.dev_addr, &gid);
+ ib_addr_set_dgid(&id_priv->id.route.addr.dev_addr, &gid);
if (cma_zero_addr(&id_priv->id.route.addr.src_addr)) {
src_in = (struct sockaddr_in *)&id_priv->id.route.addr.src_addr;
struct ib_pool_fmr *ib_fmr_pool_map_phys(struct ib_fmr_pool *pool_handle,
u64 *page_list,
int list_len,
- u64 *io_virtual_address)
+ u64 io_virtual_address)
{
struct ib_fmr_pool *pool = pool_handle;
struct ib_pool_fmr *fmr;
fmr = ib_fmr_cache_lookup(pool,
page_list,
list_len,
- *io_virtual_address);
+ io_virtual_address);
if (fmr) {
/* found in cache */
++fmr->ref_count;
spin_unlock_irqrestore(&pool->pool_lock, flags);
result = ib_map_phys_fmr(fmr->fmr, page_list, list_len,
- *io_virtual_address);
+ io_virtual_address);
if (result) {
spin_lock_irqsave(&pool->pool_lock, flags);
fmr->ref_count = 1;
if (pool->cache_bucket) {
- fmr->io_virtual_address = *io_virtual_address;
+ fmr->io_virtual_address = io_virtual_address;
fmr->page_list_len = list_len;
memcpy(fmr->page_list, page_list, list_len * sizeof(*page_list));
spin_unlock_irqrestore(&tid_lock, flags);
}
-static int send_mad(struct ib_sa_query *query, int timeout_ms)
+static int send_mad(struct ib_sa_query *query, int timeout_ms, gfp_t gfp_mask)
{
unsigned long flags;
int ret, id;
retry:
- if (!idr_pre_get(&query_idr, GFP_ATOMIC))
+ if (!idr_pre_get(&query_idr, gfp_mask))
return -ENOMEM;
spin_lock_irqsave(&idr_lock, flags);
ret = idr_get_new(&query_idr, query, &id);
*sa_query = &query->sa_query;
- ret = send_mad(&query->sa_query, timeout_ms);
+ ret = send_mad(&query->sa_query, timeout_ms, gfp_mask);
if (ret < 0)
goto err2;
*sa_query = &query->sa_query;
- ret = send_mad(&query->sa_query, timeout_ms);
+ ret = send_mad(&query->sa_query, timeout_ms, gfp_mask);
if (ret < 0)
goto err2;
*sa_query = &query->sa_query;
- ret = send_mad(&query->sa_query, timeout_ms);
+ ret = send_mad(&query->sa_query, timeout_ms, gfp_mask);
if (ret < 0)
goto err2;
memset(attr, 0, sizeof *attr);
attr->dlid = be16_to_cpu(ah->av->dlid);
attr->sl = be32_to_cpu(ah->av->sl_tclass_flowlabel) >> 28;
- attr->static_rate = ah->av->msg_sr & 0x7;
- attr->src_path_bits = ah->av->g_slid & 0x7F;
attr->port_num = be32_to_cpu(ah->av->port_pd) >> 24;
+ attr->static_rate = mthca_rate_to_ib(dev, ah->av->msg_sr & 0x7,
+ attr->port_num);
+ attr->src_path_bits = ah->av->g_slid & 0x7F;
attr->ah_flags = mthca_ah_grh_present(ah) ? IB_AH_GRH : 0;
if (attr->ah_flags) {
(PAGE_SIZE - 1));
}
-static void mthca_wq_init(struct mthca_wq *wq)
+static void mthca_wq_reset(struct mthca_wq *wq)
{
- /* mthca_alloc_qp_common() initializes the locks */
wq->next_ind = 0;
wq->last_comp = wq->max - 1;
wq->head = 0;
mthca_cq_clean(dev, to_mcq(qp->ibqp.recv_cq), qp->qpn,
qp->ibqp.srq ? to_msrq(qp->ibqp.srq) : NULL);
- mthca_wq_init(&qp->sq);
+ mthca_wq_reset(&qp->sq);
qp->sq.last = get_send_wqe(qp, qp->sq.max - 1);
- mthca_wq_init(&qp->rq);
+ mthca_wq_reset(&qp->rq);
qp->rq.last = get_recv_wqe(qp, qp->rq.max - 1);
if (mthca_is_memfree(dev)) {
qp->atomic_rd_en = 0;
qp->resp_depth = 0;
qp->sq_policy = send_policy;
- mthca_wq_init(&qp->sq);
- mthca_wq_init(&qp->rq);
- /* these are initialized separately so lockdep can tell them apart */
+ mthca_wq_reset(&qp->sq);
+ mthca_wq_reset(&qp->rq);
+
spin_lock_init(&qp->sq.lock);
spin_lock_init(&qp->rq.lock);
mem = ib_fmr_pool_map_phys(ib_conn->fmr_pool,
page_list,
page_vec->length,
- &io_addr);
+ io_addr);
if (IS_ERR(mem)) {
status = (int)PTR_ERR(mem);
(sg_dma_address(&scat[i]) & dev->fmr_page_mask) + j;
req->fmr = ib_fmr_pool_map_phys(dev->fmr_pool,
- dma_pages, page_cnt, &io_addr);
+ dma_pages, page_cnt, io_addr);
if (IS_ERR(req->fmr)) {
ret = PTR_ERR(req->fmr);
+ req->fmr = NULL;
goto out;
}
}
#ifdef __ISAPNP__
-static struct isapnp_device_id asus_ids[] __initdata = {
+static struct isapnp_device_id asus_ids[] __devinitdata = {
{ ISAPNP_VENDOR('A', 'S', 'U'), ISAPNP_FUNCTION(0x1688),
ISAPNP_VENDOR('A', 'S', 'U'), ISAPNP_FUNCTION(0x1688),
(unsigned long) "Asus1688 PnP" },
{ 0, }
};
-static struct isapnp_device_id *ipid __initdata = &asus_ids[0];
+static struct isapnp_device_id *ipid __devinitdata = &asus_ids[0];
static struct pnp_card *pnp_c __devinitdata = NULL;
#endif
-int __init
+int __devinit
setup_asuscom(struct IsdnCard *card)
{
int bytecnt;
return(0);
}
-int __init
+int __devinit
setup_avm_a1(struct IsdnCard *card)
{
u_char val;
}
#endif /* 0 */
-static void __init
+static void
inithdlc(struct IsdnCardState *cs)
{
cs->bcs[0].BC_SetStack = setstack_hdlc;
}
#ifdef CONFIG_PCI
-static struct pci_dev *dev_avm __initdata = NULL;
+static struct pci_dev *dev_avm __devinitdata = NULL;
#endif
#ifdef __ISAPNP__
-static struct pnp_card *pnp_avm_c __initdata = NULL;
+static struct pnp_card *pnp_avm_c __devinitdata = NULL;
#endif
-int __init
+int __devinit
setup_avm_pcipnp(struct IsdnCard *card)
{
u_int val, ver;
return (0);
}
-static struct pci_dev *dev_a4t __initdata = NULL;
+static struct pci_dev *dev_a4t __devinitdata = NULL;
-int __init
+int __devinit
setup_bkm_a4t(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
return (0);
}
-static int __init
+static int __devinit
sct_alloc_io(u_int adr, u_int len)
{
if (!request_region(adr, len, "scitel")) {
return(0);
}
-static struct pci_dev *dev_a8 __initdata = NULL;
-static u16 sub_vendor_id __initdata = 0;
-static u16 sub_sys_id __initdata = 0;
-static u_char pci_bus __initdata = 0;
-static u_char pci_device_fn __initdata = 0;
-static u_char pci_irq __initdata = 0;
+static struct pci_dev *dev_a8 __devinitdata = NULL;
+static u16 sub_vendor_id __devinitdata = 0;
+static u16 sub_sys_id __devinitdata = 0;
+static u_char pci_bus __devinitdata = 0;
+static u_char pci_device_fn __devinitdata = 0;
+static u_char pci_irq __devinitdata = 0;
#endif /* CONFIG_PCI */
-int __init
+int __devinit
setup_sct_quadro(struct IsdnCard *card)
{
#ifdef CONFIG_PCI
#ifdef CONFIG_PCI
#include <linux/pci.h>
-static struct pci_device_id hisax_pci_tbl[] __initdata = {
+static struct pci_device_id hisax_pci_tbl[] __devinitdata = {
#ifdef CONFIG_HISAX_FRITZPCI
{PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_A1, PCI_ANY_ID, PCI_ANY_ID},
#endif
return(0);
}
-static struct pci_dev *dev_diva __initdata = NULL;
-static struct pci_dev *dev_diva_u __initdata = NULL;
-static struct pci_dev *dev_diva201 __initdata = NULL;
-static struct pci_dev *dev_diva202 __initdata = NULL;
+static struct pci_dev *dev_diva __devinitdata = NULL;
+static struct pci_dev *dev_diva_u __devinitdata = NULL;
+static struct pci_dev *dev_diva201 __devinitdata = NULL;
+static struct pci_dev *dev_diva202 __devinitdata = NULL;
#ifdef __ISAPNP__
-static struct isapnp_device_id diva_ids[] __initdata = {
+static struct isapnp_device_id diva_ids[] __devinitdata = {
{ ISAPNP_VENDOR('G', 'D', 'I'), ISAPNP_FUNCTION(0x51),
ISAPNP_VENDOR('G', 'D', 'I'), ISAPNP_FUNCTION(0x51),
(unsigned long) "Diva picola" },
{ 0, }
};
-static struct isapnp_device_id *ipid __initdata = &diva_ids[0];
+static struct isapnp_device_id *ipid __devinitdata = &diva_ids[0];
static struct pnp_card *pnp_c __devinitdata = NULL;
#endif
-int __init
+int __devinit
setup_diva(struct IsdnCard *card)
{
int bytecnt = 8;
}
-static struct pci_dev *dev_netjet __initdata = NULL;
+static struct pci_dev *dev_netjet __devinitdata = NULL;
/* called by config.c */
-int __init
+int __devinit
setup_enternow_pci(struct IsdnCard *card)
{
int bytecnt;
return 1;
}
-static int __init
+static int __devinit
setup_gazelisa(struct IsdnCard *card, struct IsdnCardState *cs)
{
printk(KERN_INFO "Gazel: ISA PnP card automatic recognition\n");
return (0);
}
-static struct pci_dev *dev_tel __initdata = NULL;
+static struct pci_dev *dev_tel __devinitdata = NULL;
-static int __init
+static int __devinit
setup_gazelpci(struct IsdnCardState *cs)
{
u_int pci_ioaddr0 = 0, pci_ioaddr1 = 0;
return (0);
}
-int __init
+int __devinit
setup_gazel(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
/* driver module exit : */
/* release the HFC-4s/8s hardware */
/*************************************/
-static void
+static void __exit
hfc4s8s_module_exit(void)
{
pci_unregister_driver(&hfc4s8s_driver);
{
}
-static unsigned int __init
+static unsigned int
*init_send_hfcd(int cnt)
{
int i, *send;
return(send);
}
-void __init
+void
init2bds0(struct IsdnCardState *cs)
{
cs->setstack_d = setstack_hfcd;
return (0);
}
-static void __init
+static void
init_send(struct BCState *bcs)
{
int i;
bcs->hw.hfc.send[i] = 0x1fff;
}
-void __init
+void
inithfc(struct IsdnCardState *cs)
{
init_send(&cs->bcs[0]);
/********************************/
/* called for card init message */
/********************************/
-static void __init
+static void
inithfcpci(struct IsdnCardState *cs)
{
cs->bcs[0].BC_SetStack = setstack_2b;
/* this variable is used as card index when more than one cards are present */
-static struct pci_dev *dev_hfcpci __initdata = NULL;
+static struct pci_dev *dev_hfcpci __devinitdata = NULL;
#endif /* CONFIG_PCI */
-int __init
+int __devinit
setup_hfcpci(struct IsdnCard *card)
{
u_long flags;
}
#ifdef __ISAPNP__
-static struct isapnp_device_id hfc_ids[] __initdata = {
+static struct isapnp_device_id hfc_ids[] __devinitdata = {
{ ISAPNP_VENDOR('A', 'N', 'X'), ISAPNP_FUNCTION(0x1114),
ISAPNP_VENDOR('A', 'N', 'X'), ISAPNP_FUNCTION(0x1114),
(unsigned long) "Acer P10" },
{ 0, }
};
-static struct isapnp_device_id *ipid __initdata = &hfc_ids[0];
+static struct isapnp_device_id *ipid __devinitdata = &hfc_ids[0];
static struct pnp_card *pnp_c __devinitdata = NULL;
#endif
-int __init
+int __devinit
setup_hfcs(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
#define DBUSY_TIMER_VALUE 80
#define ARCOFI_USE 0
-static char *ICCVer[] __initdata =
+static char *ICCVer[] =
{"2070 A1/A3", "2070 B1", "2070 B2/B3", "2070 V2.4"};
-void __init
+void
ICCVersion(struct IsdnCardState *cs, char *s)
{
int val;
}
}
-void __init
+void
initicc(struct IsdnCardState *cs)
{
cs->setstack_d = setstack_icc;
ph_command(cs, ICC_CMD_DI);
}
-void __init
+void
clear_pending_icc_ints(struct IsdnCardState *cs)
{
int val, eval;
#define ICC_IND_AIL 0xE
#define ICC_IND_DC 0xF
-extern void __init ICCVersion(struct IsdnCardState *cs, char *s);
+extern void ICCVersion(struct IsdnCardState *cs, char *s);
extern void initicc(struct IsdnCardState *cs);
extern void icc_interrupt(struct IsdnCardState *cs, u_char val);
extern void clear_pending_icc_ints(struct IsdnCardState *cs);
static void dch_empty_fifo(struct IsdnCardState *cs, int count);
static void dch_fill_fifo(struct IsdnCardState *cs);
static inline void dch_int(struct IsdnCardState *cs);
-static void __devinit dch_setstack(struct PStack *st, struct IsdnCardState *cs);
-static void __devinit dch_init(struct IsdnCardState *cs);
+static void dch_setstack(struct PStack *st, struct IsdnCardState *cs);
+static void dch_init(struct IsdnCardState *cs);
static void bch_l2l1(struct PStack *st, int pr, void *arg);
static void bch_empty_fifo(struct BCState *bcs, int count);
static void bch_fill_fifo(struct BCState *bcs);
static void bch_close_state(struct BCState *bcs);
static int bch_open_state(struct IsdnCardState *cs, struct BCState *bcs);
static int bch_setstack(struct PStack *st, struct BCState *bcs);
-static void __devinit bch_init(struct IsdnCardState *cs, int hscx);
-static void __init clear_pending_ints(struct IsdnCardState *cs);
+static void bch_init(struct IsdnCardState *cs, int hscx);
+static void clear_pending_ints(struct IsdnCardState *cs);
//----------------------------------------------------------
// Issue Layer 1 command to chip
//----------------------------------------------------------
//----------------------------------------------------------
-static void __devinit
+static void
dch_setstack(struct PStack *st, struct IsdnCardState *cs)
{
st->l1.l1hw = dch_l2l1;
//----------------------------------------------------------
//----------------------------------------------------------
-static void __devinit
+static void
dch_init(struct IsdnCardState *cs)
{
printk(KERN_INFO "HiSax: IPACX ISDN driver v0.1.0\n");
//----------------------------------------------------------
//----------------------------------------------------------
-static void __devinit
+static void
bch_init(struct IsdnCardState *cs, int hscx)
{
cs->bcs[hscx].BC_SetStack = bch_setstack;
//----------------------------------------------------------
// Clears chip interrupt status
//----------------------------------------------------------
-static void __init
+static void
clear_pending_ints(struct IsdnCardState *cs)
{
int ista;
// Does chip configuration work
// Work to do depends on bit mask in part
//----------------------------------------------------------
-void __init
+void
init_ipacx(struct IsdnCardState *cs, int part)
{
if (part &1) { // initialise chip
}
#ifdef __ISAPNP__
-static struct pnp_card *pnp_c __initdata = NULL;
+static struct pnp_card *pnp_c __devinitdata = NULL;
#endif
-int __init
+int __devinit
setup_isurf(struct IsdnCard *card)
{
int ver;
}
#ifdef __ISAPNP__
-static struct isapnp_device_id itk_ids[] __initdata = {
+static struct isapnp_device_id itk_ids[] __devinitdata = {
{ ISAPNP_VENDOR('I', 'T', 'K'), ISAPNP_FUNCTION(0x25),
ISAPNP_VENDOR('I', 'T', 'K'), ISAPNP_FUNCTION(0x25),
(unsigned long) "ITK micro 2" },
{ 0, }
};
-static struct isapnp_device_id *ipid __initdata = &itk_ids[0];
+static struct isapnp_device_id *ipid __devinitdata = &itk_ids[0];
static struct pnp_card *pnp_c __devinitdata = NULL;
#endif
-int __init
+int __devinit
setup_ix1micro(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
#include <linux/interrupt.h>
-int __init
+int
JadeVersion(struct IsdnCardState *cs, char *s)
{
int ver,i;
return (0);
}
-void __init
+void
clear_pending_jade_ints(struct IsdnCardState *cs)
{
int val;
cs->BC_Write_Reg(cs, 1, jade_HDLC_IMR, 0xF8);
}
-void __init
+void
initjade(struct IsdnCardState *cs)
{
cs->bcs[0].BC_SetStack = setstack_jade;
return(0);
}
-int __init
+int __devinit
setup_mic(struct IsdnCard *card)
{
int bytecnt;
}
-void __init
+void
inittiger(struct IsdnCardState *cs)
{
if (!(cs->bcs[0].hw.tiger.send = kmalloc(NETJET_DMA_TXSIZE * sizeof(unsigned int),
return(0);
}
-static struct pci_dev *niccy_dev __initdata = NULL;
+static struct pci_dev *niccy_dev __devinitdata = NULL;
#ifdef __ISAPNP__
static struct pnp_card *pnp_c __devinitdata = NULL;
#endif
-int __init
+int __devinit
setup_niccy(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
return(0);
}
-static struct pci_dev *dev_netjet __initdata = NULL;
+static struct pci_dev *dev_netjet __devinitdata = NULL;
-int __init
+int __devinit
setup_netjet_s(struct IsdnCard *card)
{
int bytecnt,cfg;
return(0);
}
-static struct pci_dev *dev_netjet __initdata = NULL;
+static struct pci_dev *dev_netjet __devinitdata = NULL;
-int __init
+int __devinit
setup_netjet_u(struct IsdnCard *card)
{
int bytecnt;
return(0);
}
-int __init
+int __devinit
setup_s0box(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
}
-int __init
+int __devinit
setup_saphir(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
return(0);
}
-static int __init
+static int __devinit
get_io_range(struct IsdnCardState *cs)
{
int i, j, adr;
}
}
-int __init
+int __devinit
setup_sportster(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
return(0);
}
-int __init
+int __devinit
setup_TeleInt(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
return(0);
}
-int __init
+int __devinit
setup_teles0(struct IsdnCard *card)
{
u_char val;
return(0);
}
-static struct pci_dev *dev_tel __initdata = NULL;
+static struct pci_dev *dev_tel __devinitdata = NULL;
-int __init
+int __devinit
setup_telespci(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
#define DBUSY_TIMER_VALUE 80
-static char *W6692Ver[] __initdata =
+static char *W6692Ver[] =
{"W6692 V00", "W6692 V01", "W6692 V10",
"W6692 V11"};
-static void __init
+static void
W6692Version(struct IsdnCardState *cs, char *s)
{
int val;
}
}
-static void __init initW6692(struct IsdnCardState *cs, int part)
+static void initW6692(struct IsdnCardState *cs, int part)
{
if (part & 1) {
cs->setstack_d = setstack_W6692;
static int id_idx ;
-static struct pci_dev *dev_w6692 __initdata = NULL;
+static struct pci_dev *dev_w6692 __devinitdata = NULL;
-int __init
+int __devinit
setup_w6692(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
static ssize_t
isdn_read(struct file *file, char __user *buf, size_t count, loff_t * off)
{
- uint minor = MINOR(file->f_dentry->d_inode->i_rdev);
+ uint minor = iminor(file->f_dentry->d_inode);
int len = 0;
int drvidx;
int chidx;
static ssize_t
isdn_write(struct file *file, const char __user *buf, size_t count, loff_t * off)
{
- uint minor = MINOR(file->f_dentry->d_inode->i_rdev);
+ uint minor = iminor(file->f_dentry->d_inode);
int drvidx;
int chidx;
int retval;
isdn_poll(struct file *file, poll_table * wait)
{
unsigned int mask = 0;
- unsigned int minor = MINOR(file->f_dentry->d_inode->i_rdev);
+ unsigned int minor = iminor(file->f_dentry->d_inode);
int drvidx = isdn_minor2drv(minor - ISDN_MINOR_CTRL);
lock_kernel();
static int
isdn_ioctl(struct inode *inode, struct file *file, uint cmd, ulong arg)
{
- uint minor = MINOR(inode->i_rdev);
+ uint minor = iminor(inode);
isdn_ctrl c;
int drvidx;
int chidx;
static int
isdn_open(struct inode *ino, struct file *filep)
{
- uint minor = MINOR(ino->i_rdev);
+ uint minor = iminor(ino);
int drvidx;
int chidx;
int retval = -ENODEV;
static int
isdn_close(struct inode *ino, struct file *filep)
{
- uint minor = MINOR(ino->i_rdev);
+ uint minor = iminor(ino);
lock_kernel();
if (minor == ISDN_MINOR_STATUS) {
if (is->debug & 0x2)
printk(KERN_DEBUG "isdn_ppp_poll: minor: %d\n",
- MINOR(file->f_dentry->d_inode->i_rdev));
+ iminor(file->f_dentry->d_inode));
/* just registers wait_queue hook. This doesn't really wait. */
poll_wait(file, &is->wq, wait);
help
This option enables support for the LEDs on Amstrad Delta (E3).
+config LEDS_NET48XX
+ tristate "LED Support for Soekris net48xx series Error LED"
+ depends on LEDS_CLASS && SCx200_GPIO
+ help
+ This option enables support for the Soekris net4801 and net4826 error
+ LED.
+
comment "LED Triggers"
config LEDS_TRIGGERS
obj-$(CONFIG_LEDS_TOSA) += leds-tosa.o
obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o
obj-$(CONFIG_LEDS_AMS_DELTA) += leds-ams-delta.o
+obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
# LED Triggers
obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
--- /dev/null
+/*
+ * LEDs driver for Soekris net48xx
+ *
+ * Copyright (C) 2006 Chris Boot <bootc@bootc.net>
+ *
+ * Based on leds-ams-delta.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <asm/io.h>
+#include <linux/scx200_gpio.h>
+
+#define DRVNAME "net48xx-led"
+#define NET48XX_ERROR_LED_GPIO 20
+
+static struct platform_device *pdev;
+
+static void net48xx_error_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value)
+ scx200_gpio_set_high(NET48XX_ERROR_LED_GPIO);
+ else
+ scx200_gpio_set_low(NET48XX_ERROR_LED_GPIO);
+}
+
+static struct led_classdev net48xx_error_led = {
+ .name = "net48xx:error",
+ .brightness_set = net48xx_error_led_set,
+};
+
+#ifdef CONFIG_PM
+static int net48xx_led_suspend(struct platform_device *dev,
+ pm_message_t state)
+{
+ led_classdev_suspend(&net48xx_error_led);
+ return 0;
+}
+
+static int net48xx_led_resume(struct platform_device *dev)
+{
+ led_classdev_resume(&net48xx_error_led);
+ return 0;
+}
+#else
+#define net48xx_led_suspend NULL
+#define net48xx_led_resume NULL
+#endif
+
+static int net48xx_led_probe(struct platform_device *pdev)
+{
+ return led_classdev_register(&pdev->dev, &net48xx_error_led);
+}
+
+static int net48xx_led_remove(struct platform_device *pdev)
+{
+ led_classdev_unregister(&net48xx_error_led);
+ return 0;
+}
+
+static struct platform_driver net48xx_led_driver = {
+ .probe = net48xx_led_probe,
+ .remove = net48xx_led_remove,
+ .suspend = net48xx_led_suspend,
+ .resume = net48xx_led_resume,
+ .driver = {
+ .name = DRVNAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init net48xx_led_init(void)
+{
+ int ret;
+
+ if (!scx200_gpio_present()) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ ret = platform_driver_register(&net48xx_led_driver);
+ if (ret < 0)
+ goto out;
+
+ pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0);
+ if (IS_ERR(pdev)) {
+ ret = PTR_ERR(pdev);
+ platform_driver_unregister(&net48xx_led_driver);
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+static void __exit net48xx_led_exit(void)
+{
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&net48xx_led_driver);
+}
+
+module_init(net48xx_led_init);
+module_exit(net48xx_led_exit);
+
+MODULE_AUTHOR("Chris Boot <bootc@bootc.net>");
+MODULE_DESCRIPTION("Soekris net48xx LED driver");
+MODULE_LICENSE("GPL");
+
config PMAC_BACKLIGHT
bool "Backlight control for LCD screens"
- depends on ADB_PMU && (BROKEN || !PPC64)
+ depends on ADB_PMU && FB = y && (BROKEN || !PPC64)
+ select FB_BACKLIGHT
+ select BACKLIGHT_CLASS_DEVICE
+ select BACKLIGHT_LCD_SUPPORT
help
Say Y here to enable Macintosh specific extensions of the generic
backlight code. With this enabled, the brightness keys on older
{
unsigned int irq;
- irq = irq_create_mapping(NULL, line, 0);
+ irq = irq_create_mapping(NULL, line);
if (irq != NO_IRQ) {
dev->interrupt[index].start = irq;
dev->interrupt[index].flags = IORESOURCE_IRQ;
struct of_device *of_dev;
int doorbell; /* doorbell gpio */
u32 __iomem *db_buf; /* doorbell buffer */
- int db_irq;
+ struct device_node *db_node;
+ unsigned int db_irq;
int msg;
- int msg_irq;
+ struct device_node *msg_node;
+ unsigned int msg_irq;
struct smu_cmd_buf *cmd_buf; /* command buffer virtual */
u32 cmd_buf_abs; /* command buffer absolute */
struct list_head cmd_list;
*/
static struct smu_device *smu;
static DEFINE_MUTEX(smu_part_access);
+static int smu_irq_inited;
static void smu_i2c_retry(unsigned long data);
smu_start_cmd();
spin_unlock_irqrestore(&smu->lock, flags);
+ /* Workaround for early calls when irq isn't available */
+ if (!smu_irq_inited || smu->db_irq == NO_IRQ)
+ smu_spinwait_cmd(cmd);
+
return 0;
}
EXPORT_SYMBOL(smu_queue_cmd);
smu->cmd_buf_abs = (u32)smu_cmdbuf_abs;
smu->cmd_buf = (struct smu_cmd_buf *)abs_to_virt(smu_cmdbuf_abs);
- np = of_find_node_by_name(NULL, "smu-doorbell");
- if (np == NULL) {
+ smu->db_node = of_find_node_by_name(NULL, "smu-doorbell");
+ if (smu->db_node == NULL) {
printk(KERN_ERR "SMU: Can't find doorbell GPIO !\n");
goto fail;
}
- data = (u32 *)get_property(np, "reg", NULL);
+ data = (u32 *)get_property(smu->db_node, "reg", NULL);
if (data == NULL) {
- of_node_put(np);
+ of_node_put(smu->db_node);
+ smu->db_node = NULL;
printk(KERN_ERR "SMU: Can't find doorbell GPIO address !\n");
goto fail;
}
smu->doorbell = *data;
if (smu->doorbell < 0x50)
smu->doorbell += 0x50;
- smu->db_irq = irq_of_parse_and_map(np, 0);
-
- of_node_put(np);
/* Now look for the smu-interrupt GPIO */
do {
- np = of_find_node_by_name(NULL, "smu-interrupt");
- if (np == NULL)
+ smu->msg_node = of_find_node_by_name(NULL, "smu-interrupt");
+ if (smu->msg_node == NULL)
break;
- data = (u32 *)get_property(np, "reg", NULL);
+ data = (u32 *)get_property(smu->msg_node, "reg", NULL);
if (data == NULL) {
- of_node_put(np);
+ of_node_put(smu->msg_node);
+ smu->msg_node = NULL;
break;
}
smu->msg = *data;
if (smu->msg < 0x50)
smu->msg += 0x50;
- smu->msg_irq = irq_of_parse_and_map(np, 0);
- of_node_put(np);
} while(0);
/* Doorbell buffer is currently hard-coded, I didn't find a proper
smu->i2c_timer.function = smu_i2c_retry;
smu->i2c_timer.data = (unsigned long)smu;
+ if (smu->db_node) {
+ smu->db_irq = irq_of_parse_and_map(smu->db_node, 0);
+ if (smu->db_irq == NO_IRQ)
+ printk(KERN_ERR "smu: failed to map irq for node %s\n",
+ smu->db_node->full_name);
+ }
+ if (smu->msg_node) {
+ smu->msg_irq = irq_of_parse_and_map(smu->msg_node, 0);
+ if (smu->msg_irq == NO_IRQ)
+ printk(KERN_ERR "smu: failed to map irq for node %s\n",
+ smu->msg_node->full_name);
+ }
+
/*
* Try to request the interrupts
*/
}
}
+ smu_irq_inited = 1;
return 0;
}
/* This has to be before arch_initcall as the low i2c stuff relies on the
if (fail && --cmd->retries > 0) {
DPRINTK("SMU: i2c failure, starting timer...\n");
BUG_ON(cmd != smu->cmd_i2c_cur);
+ if (!smu_irq_inited) {
+ mdelay(5);
+ smu_i2c_retry(0);
+ return;
+ }
mod_timer(&smu->i2c_timer, jiffies + msecs_to_jiffies(5));
return;
}
.procname = "speed_limit_min",
.data = &sysctl_speed_limit_min,
.maxlen = sizeof(int),
- .mode = 0644,
+ .mode = S_IRUGO|S_IWUSR,
.proc_handler = &proc_dointvec,
},
{
.procname = "speed_limit_max",
.data = &sysctl_speed_limit_max,
.maxlen = sizeof(int),
- .mode = 0644,
+ .mode = S_IRUGO|S_IWUSR,
.proc_handler = &proc_dointvec,
},
{ .ctl_name = 0 }
.ctl_name = DEV_RAID,
.procname = "raid",
.maxlen = 0,
- .mode = 0555,
+ .mode = S_IRUGO|S_IXUGO,
.child = raid_table,
},
{ .ctl_name = 0 }
if (rdev->sb_size & bmask)
rdev-> sb_size = (rdev->sb_size | bmask)+1;
+ if (sb->level == cpu_to_le32(LEVEL_MULTIPATH))
+ rdev->desc_nr = -1;
+ else
+ rdev->desc_nr = le32_to_cpu(sb->dev_number);
+
if (refdev == 0)
ret = 1;
else {
}
if (mddev->level != LEVEL_MULTIPATH) {
int role;
- rdev->desc_nr = le32_to_cpu(sb->dev_number);
role = le16_to_cpu(sb->dev_roles[rdev->desc_nr]);
switch(role) {
case 0xffff: /* spare */
}
return err ? err : len;
}
-static struct rdev_sysfs_entry
-rdev_state = __ATTR(state, 0644, state_show, state_store);
+static struct rdev_sysfs_entry rdev_state =
+__ATTR(state, S_IRUGO|S_IWUSR, state_show, state_store);
static ssize_t
super_show(mdk_rdev_t *rdev, char *page)
return -EINVAL;
}
static struct rdev_sysfs_entry rdev_errors =
-__ATTR(errors, 0644, errors_show, errors_store);
+__ATTR(errors, S_IRUGO|S_IWUSR, errors_show, errors_store);
static ssize_t
slot_show(mdk_rdev_t *rdev, char *page)
static struct rdev_sysfs_entry rdev_slot =
-__ATTR(slot, 0644, slot_show, slot_store);
+__ATTR(slot, S_IRUGO|S_IWUSR, slot_show, slot_store);
static ssize_t
offset_show(mdk_rdev_t *rdev, char *page)
}
static struct rdev_sysfs_entry rdev_offset =
-__ATTR(offset, 0644, offset_show, offset_store);
+__ATTR(offset, S_IRUGO|S_IWUSR, offset_show, offset_store);
static ssize_t
rdev_size_show(mdk_rdev_t *rdev, char *page)
}
static struct rdev_sysfs_entry rdev_size =
-__ATTR(size, 0644, rdev_size_show, rdev_size_store);
+__ATTR(size, S_IRUGO|S_IWUSR, rdev_size_show, rdev_size_store);
static struct attribute *rdev_default_attrs[] = {
&rdev_state.attr,
if (!entry->store)
return -EIO;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
return entry->store(rdev, page, length);
}
return len;
}
static struct md_sysfs_entry md_safe_delay =
-__ATTR(safe_mode_delay, 0644,safe_delay_show, safe_delay_store);
+__ATTR(safe_mode_delay, S_IRUGO|S_IWUSR,safe_delay_show, safe_delay_store);
static ssize_t
level_show(mddev_t *mddev, char *page)
}
static struct md_sysfs_entry md_level =
-__ATTR(level, 0644, level_show, level_store);
+__ATTR(level, S_IRUGO|S_IWUSR, level_show, level_store);
static ssize_t
return len;
}
static struct md_sysfs_entry md_layout =
-__ATTR(layout, 0655, layout_show, layout_store);
+__ATTR(layout, S_IRUGO|S_IWUSR, layout_show, layout_store);
static ssize_t
return rv ? rv : len;
}
static struct md_sysfs_entry md_raid_disks =
-__ATTR(raid_disks, 0644, raid_disks_show, raid_disks_store);
+__ATTR(raid_disks, S_IRUGO|S_IWUSR, raid_disks_show, raid_disks_store);
static ssize_t
chunk_size_show(mddev_t *mddev, char *page)
return len;
}
static struct md_sysfs_entry md_chunk_size =
-__ATTR(chunk_size, 0644, chunk_size_show, chunk_size_store);
+__ATTR(chunk_size, S_IRUGO|S_IWUSR, chunk_size_show, chunk_size_store);
static ssize_t
resync_start_show(mddev_t *mddev, char *page)
return len;
}
static struct md_sysfs_entry md_resync_start =
-__ATTR(resync_start, 0644, resync_start_show, resync_start_store);
+__ATTR(resync_start, S_IRUGO|S_IWUSR, resync_start_show, resync_start_store);
/*
* The array state can be:
else
return len;
}
-static struct md_sysfs_entry md_array_state = __ATTR(array_state, 0644, array_state_show, array_state_store);
+static struct md_sysfs_entry md_array_state =
+__ATTR(array_state, S_IRUGO|S_IWUSR, array_state_show, array_state_store);
static ssize_t
null_show(mddev_t *mddev, char *page)
}
static struct md_sysfs_entry md_new_device =
-__ATTR(new_dev, 0200, null_show, new_dev_store);
+__ATTR(new_dev, S_IWUSR, null_show, new_dev_store);
static ssize_t
size_show(mddev_t *mddev, char *page)
}
static struct md_sysfs_entry md_size =
-__ATTR(component_size, 0644, size_show, size_store);
+__ATTR(component_size, S_IRUGO|S_IWUSR, size_show, size_store);
/* Metdata version.
}
static struct md_sysfs_entry md_metadata =
-__ATTR(metadata_version, 0644, metadata_show, metadata_store);
+__ATTR(metadata_version, S_IRUGO|S_IWUSR, metadata_show, metadata_store);
static ssize_t
action_show(mddev_t *mddev, char *page)
(unsigned long long) mddev->resync_mismatches);
}
-static struct md_sysfs_entry
-md_scan_mode = __ATTR(sync_action, S_IRUGO|S_IWUSR, action_show, action_store);
+static struct md_sysfs_entry md_scan_mode =
+__ATTR(sync_action, S_IRUGO|S_IWUSR, action_show, action_store);
-static struct md_sysfs_entry
-md_mismatches = __ATTR_RO(mismatch_cnt);
+static struct md_sysfs_entry md_mismatches = __ATTR_RO(mismatch_cnt);
static ssize_t
sync_min_show(mddev_t *mddev, char *page)
sync_speed_show(mddev_t *mddev, char *page)
{
unsigned long resync, dt, db;
- resync = (mddev->curr_resync - atomic_read(&mddev->recovery_active));
+ resync = (mddev->curr_mark_cnt - atomic_read(&mddev->recovery_active));
dt = ((jiffies - mddev->resync_mark) / HZ);
if (!dt) dt++;
db = resync - (mddev->resync_mark_cnt);
return sprintf(page, "%ld\n", db/dt/2); /* K/sec */
}
-static struct md_sysfs_entry
-md_sync_speed = __ATTR_RO(sync_speed);
+static struct md_sysfs_entry md_sync_speed = __ATTR_RO(sync_speed);
static ssize_t
sync_completed_show(mddev_t *mddev, char *page)
return sprintf(page, "%lu / %lu\n", resync, max_blocks);
}
-static struct md_sysfs_entry
-md_sync_completed = __ATTR_RO(sync_completed);
+static struct md_sysfs_entry md_sync_completed = __ATTR_RO(sync_completed);
static ssize_t
suspend_lo_show(mddev_t *mddev, char *page)
if (!entry->store)
return -EIO;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
rv = mddev_lock(mddev);
if (!rv) {
rv = entry->store(mddev, page, length);
}
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
- md_wakeup_thread(mddev->thread);
if (mddev->sb_dirty)
md_update_sb(mddev);
* start recovery here. If we leave it to md_check_recovery,
* it will remove the drives and not do the right thing
*/
- if (mddev->degraded) {
+ if (mddev->degraded && !mddev->sync_thread) {
struct list_head *rtmp;
int spares = 0;
ITERATE_RDEV(mddev,rdev,rtmp)
mdname(mddev));
/* leave the spares where they are, it shouldn't hurt */
mddev->recovery = 0;
- } else
- md_wakeup_thread(mddev->sync_thread);
+ }
}
}
+ md_wakeup_thread(mddev->thread);
+ md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */
mddev->changed = 1;
md_new_event(mddev);
__builtin_return_address(0),__builtin_return_address(1),
__builtin_return_address(2),__builtin_return_address(3));
*/
+ if (!mddev->pers)
+ return;
if (!mddev->pers->error_handler)
return;
mddev->pers->error_handler(mddev,rdev);
*/
dt = ((jiffies - mddev->resync_mark) / HZ);
if (!dt) dt++;
- db = resync - (mddev->resync_mark_cnt/2);
- rt = (dt * ((unsigned long)(max_blocks-resync) / (db/100+1)))/100;
+ db = (mddev->curr_mark_cnt - atomic_read(&mddev->recovery_active))
+ - mddev->resync_mark_cnt;
+ rt = (dt * ((unsigned long)(max_blocks-resync) / (db/2/100+1)))/100;
seq_printf(seq, " finish=%lu.%lumin", rt / 60, (rt % 60)/6);
- seq_printf(seq, " speed=%ldK/sec", db/dt);
+ seq_printf(seq, " speed=%ldK/sec", db/2/dt);
}
static void *md_seq_start(struct seq_file *seq, loff_t *pos)
j += sectors;
if (j>1) mddev->curr_resync = j;
+ mddev->curr_mark_cnt = io_sectors;
if (last_check == 0)
/* this is the earliers that rebuilt will be
* visible in /proc/mdstat
return -EINVAL;
}
-module_param_call(start_ro, set_ro, get_ro, NULL, 0600);
-module_param(start_dirty_degraded, int, 0644);
+module_param_call(start_ro, set_ro, get_ro, NULL, S_IRUSR|S_IWUSR);
+module_param(start_dirty_degraded, int, S_IRUGO|S_IWUSR);
EXPORT_SYMBOL(register_md_personality);
long sectors_to_go = r1_bio->sectors;
/* make sure these bits doesn't get cleared. */
do {
- bitmap_end_sync(mddev->bitmap, r1_bio->sector,
+ bitmap_end_sync(mddev->bitmap, s,
&sync_blocks, 1);
s += sync_blocks;
sectors_to_go -= sync_blocks;
s<<9, conf->tmppage, READ) == 0)
/* Well, this device is dead */
md_error(mddev, rdev);
+ else
+ printk(KERN_INFO "raid1:%s: read error corrected (%d sectors at %llu on %s)\n",
+ mdname(mddev), s, (unsigned long long)(sect + rdev->data_offset), bdevname(rdev->bdev, b));
}
}
} else {
s<<9, conf->tmppage, READ) == 0)
/* Well, this device is dead */
md_error(mddev, rdev);
+ else
+ printk(KERN_INFO "raid10:%s: read error corrected (%d sectors at %llu on %s)\n",
+ mdname(mddev), s, (unsigned long long)(sect+rdev->data_offset), bdevname(rdev->bdev, b));
+
rdev_dec_pending(rdev, mddev);
rcu_read_lock();
}
* Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+/*
+ * BITMAP UNPLUGGING:
+ *
+ * The sequencing for updating the bitmap reliably is a little
+ * subtle (and I got it wrong the first time) so it deserves some
+ * explanation.
+ *
+ * We group bitmap updates into batches. Each batch has a number.
+ * We may write out several batches at once, but that isn't very important.
+ * conf->bm_write is the number of the last batch successfully written.
+ * conf->bm_flush is the number of the last batch that was closed to
+ * new additions.
+ * When we discover that we will need to write to any block in a stripe
+ * (in add_stripe_bio) we update the in-memory bitmap and record in sh->bm_seq
+ * the number of the batch it will be in. This is bm_flush+1.
+ * When we are ready to do a write, if that batch hasn't been written yet,
+ * we plug the array and queue the stripe for later.
+ * When an unplug happens, we increment bm_flush, thus closing the current
+ * batch.
+ * When we notice that bm_flush > bm_write, we write out all pending updates
+ * to the bitmap, and advance bm_write to where bm_flush was.
+ * This may occasionally write a bit out twice, but is sure never to
+ * miss any bits.
+ */
#include <linux/module.h>
#include <linux/slab.h>
BUG_ON(!list_empty(&sh->lru));
BUG_ON(atomic_read(&conf->active_stripes)==0);
if (test_bit(STRIPE_HANDLE, &sh->state)) {
- if (test_bit(STRIPE_DELAYED, &sh->state))
+ if (test_bit(STRIPE_DELAYED, &sh->state)) {
list_add_tail(&sh->lru, &conf->delayed_list);
- else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
- conf->seq_write == sh->bm_seq)
+ blk_plug_device(conf->mddev->queue);
+ } else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
+ sh->bm_seq - conf->seq_write > 0) {
list_add_tail(&sh->lru, &conf->bitmap_list);
- else {
+ blk_plug_device(conf->mddev->queue);
+ } else {
clear_bit(STRIPE_BIT_DELAY, &sh->state);
list_add_tail(&sh->lru, &conf->handle_list);
}
< (conf->max_nr_stripes *3/4)
|| !conf->inactive_blocked),
conf->device_lock,
- unplug_slaves(conf->mddev)
+ raid5_unplug_device(conf->mddev->queue)
);
conf->inactive_blocked = 0;
} else
} else {
if (!test_bit(STRIPE_HANDLE, &sh->state))
atomic_inc(&conf->active_stripes);
- if (list_empty(&sh->lru))
+ if (list_empty(&sh->lru) &&
+ !test_bit(STRIPE_EXPANDING, &sh->state))
BUG();
list_del_init(&sh->lru);
}
raid5_conf_t *conf = sh->raid_conf;
int disks = sh->disks, i;
int uptodate = test_bit(BIO_UPTODATE, &bi->bi_flags);
+ char b[BDEVNAME_SIZE];
+ mdk_rdev_t *rdev;
if (bi->bi_size)
return 1;
set_bit(R5_UPTODATE, &sh->dev[i].flags);
#endif
if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
- printk(KERN_INFO "raid5: read error corrected!!\n");
+ rdev = conf->disks[i].rdev;
+ printk(KERN_INFO "raid5:%s: read error corrected (%lu sectors at %llu on %s)\n",
+ mdname(conf->mddev), STRIPE_SECTORS,
+ (unsigned long long)sh->sector + rdev->data_offset,
+ bdevname(rdev->bdev, b));
clear_bit(R5_ReadError, &sh->dev[i].flags);
clear_bit(R5_ReWrite, &sh->dev[i].flags);
}
if (atomic_read(&conf->disks[i].rdev->read_errors))
atomic_set(&conf->disks[i].rdev->read_errors, 0);
} else {
+ const char *bdn = bdevname(conf->disks[i].rdev->bdev, b);
int retry = 0;
+ rdev = conf->disks[i].rdev;
+
clear_bit(R5_UPTODATE, &sh->dev[i].flags);
- atomic_inc(&conf->disks[i].rdev->read_errors);
+ atomic_inc(&rdev->read_errors);
if (conf->mddev->degraded)
- printk(KERN_WARNING "raid5: read error not correctable.\n");
+ printk(KERN_WARNING "raid5:%s: read error not correctable (sector %llu on %s).\n",
+ mdname(conf->mddev),
+ (unsigned long long)sh->sector + rdev->data_offset,
+ bdn);
else if (test_bit(R5_ReWrite, &sh->dev[i].flags))
/* Oh, no!!! */
- printk(KERN_WARNING "raid5: read error NOT corrected!!\n");
- else if (atomic_read(&conf->disks[i].rdev->read_errors)
+ printk(KERN_WARNING "raid5:%s: read error NOT corrected!! (sector %llu on %s).\n",
+ mdname(conf->mddev),
+ (unsigned long long)sh->sector + rdev->data_offset,
+ bdn);
+ else if (atomic_read(&rdev->read_errors)
> conf->max_nr_stripes)
printk(KERN_WARNING
- "raid5: Too many read errors, failing device.\n");
+ "raid5:%s: Too many read errors, failing device %s.\n",
+ mdname(conf->mddev), bdn);
else
retry = 1;
if (retry)
else {
clear_bit(R5_ReadError, &sh->dev[i].flags);
clear_bit(R5_ReWrite, &sh->dev[i].flags);
- md_error(conf->mddev, conf->disks[i].rdev);
+ md_error(conf->mddev, rdev);
}
}
rdev_dec_pending(conf->disks[i].rdev, conf->mddev);
(unsigned long long)sh->sector, dd_idx);
if (conf->mddev->bitmap && firstwrite) {
- sh->bm_seq = conf->seq_write;
bitmap_startwrite(conf->mddev->bitmap, sh->sector,
STRIPE_SECTORS, 0);
+ sh->bm_seq = conf->seq_flush+1;
set_bit(STRIPE_BIT_DELAY, &sh->state);
}
return ret;
}
-static inline void raid5_plug_device(raid5_conf_t *conf)
-{
- spin_lock_irq(&conf->device_lock);
- blk_plug_device(conf->mddev->queue);
- spin_unlock_irq(&conf->device_lock);
-}
-
static int make_request(request_queue_t *q, struct bio * bi)
{
mddev_t *mddev = q->queuedata;
goto retry;
}
finish_wait(&conf->wait_for_overlap, &w);
- raid5_plug_device(conf);
handle_stripe(sh, NULL);
release_stripe(sh);
} else {
while (1) {
struct list_head *first;
- if (conf->seq_flush - conf->seq_write > 0) {
+ if (conf->seq_flush != conf->seq_write) {
int seq = conf->seq_flush;
spin_unlock_irq(&conf->device_lock);
bitmap_unplug(mddev->bitmap);
set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
mddev->sync_thread = md_register_thread(md_do_sync, mddev,
"%s_reshape");
- /* FIXME if md_register_thread fails?? */
- md_wakeup_thread(mddev->sync_thread);
-
}
/* read-ahead size must cover two whole stripes, which is
}
ret = nxt2002_load_firmware(fe, fw);
+ release_firmware(fw);
if (ret) {
printk("nxt2002: Writing firmware to device failed\n");
- release_firmware(fw);
return ret;
}
printk("nxt2002: Firmware upload complete\n");
}
ret = nxt2004_load_firmware(fe, fw);
+ release_firmware(fw);
if (ret) {
printk("nxt2004: Writing firmware to device failed\n");
- release_firmware(fw);
return ret;
}
printk("nxt2004: Firmware upload complete\n");
}
ret = or51211_load_firmware(fe, fw);
+ release_firmware(fw);
if (ret) {
printk(KERN_WARNING "or51211: Writing firmware to "
"device failed!\n");
- release_firmware(fw);
return ret;
}
printk(KERN_INFO "or51211: Firmware upload complete.\n");
printk("sp8870: waiting for firmware upload (%s)...\n", SP8870_DEFAULT_FIRMWARE);
if (state->config->request_firmware(fe, &fw, SP8870_DEFAULT_FIRMWARE)) {
printk("sp8870: no firmware upload (timeout or file not found?)\n");
- release_firmware(fw);
return -EIO;
}
release_firmware(fw);
return -EIO;
}
+ release_firmware(fw);
printk("sp8870: firmware upload complete\n");
/* enable TS output and interface pins */
}
ret = sp887x_initial_setup(fe, fw);
+ release_firmware(fw);
if (ret) {
printk("sp887x: writing firmware to device failed\n");
- release_firmware(fw);
return ret;
}
printk("sp887x: firmware upload complete\n");
if (firmware->size != BLACKBIRD_FIRM_IMAGE_SIZE) {
dprintk(0, "ERROR: Firmware size mismatch (have %zd, expected %d)\n",
firmware->size, BLACKBIRD_FIRM_IMAGE_SIZE);
+ release_firmware(firmware);
return -1;
}
if (0 != memcmp(firmware->data, magic, 8)) {
dprintk(0, "ERROR: Firmware magic mismatch, wrong file?\n");
+ release_firmware(firmware);
return -1;
}
}
if (checksum) {
dprintk(0, "ERROR: Firmware load failed (checksum mismatch).\n");
+ release_firmware(firmware);
return -1;
}
release_firmware(firmware);
extern void i2o_device_remove(struct i2o_device *);
extern int i2o_device_parse_lct(struct i2o_controller *);
+int i2o_parm_issue(struct i2o_device *i2o_dev, int cmd, void *oplist,
+ int oplen, void *reslist, int reslen);
+
/* IOP */
extern struct i2o_controller *i2o_iop_alloc(void);
#include <asm/uaccess.h>
-#define SG_TABLESIZE 30
+#include "core.h"
-extern int i2o_parm_issue(struct i2o_device *, int, void *, int, void *, int);
+#define SG_TABLESIZE 30
static int i2o_cfg_ioctl(struct inode *, struct file *, unsigned int,
unsigned long);
mcp_enable(mcp);
id = mcp_reg_read(mcp, UCB_ID);
- if (id != UCB_ID_1200 && id != UCB_ID_1300) {
+ if (id != UCB_ID_1200 && id != UCB_ID_1300 && id != UCB_ID_TC35143) {
printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id);
goto err_disable;
}
#define UCB_ID 0x0c
#define UCB_ID_1200 0x1004
#define UCB_ID_1300 0x1005
+#define UCB_ID_TC35143 0x9712
#define UCB_MODE 0x0d
#define UCB_MODE_DYN_VFLAG_ENA (1 << 12)
if (cmd->data)
flags |= SDHCI_CMD_DATA;
- writel(SDHCI_MAKE_CMD(cmd->opcode, flags),
+ writew(SDHCI_MAKE_CMD(cmd->opcode, flags),
host->ioaddr + SDHCI_COMMAND);
}
version = (version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT;
if (version != 0) {
printk(KERN_ERR "%s: Unknown controller version (%d). "
- "Cowardly refusing to continue.\n", host->slot_descr,
+ "You may experience problems.\n", host->slot_descr,
version);
- ret = -ENODEV;
- goto unmap;
}
caps = readl(host->ioaddr + SDHCI_CAPABILITIES);
410 Severn Ave., Suite 210
Annapolis MD 21403
- Linux Kernel Additions:
-
- 0.99H+lk0.9 - David S. Miller - softnet, PCI DMA updates
- 0.99H+lk1.0 - Jeff Garzik <jgarzik@pobox.com>
- Remove compatibility defines for kernel versions < 2.2.x.
- Update for new 2.3.x module interface
- LK1.1.2 (March 19, 2000)
- * New PCI interface (jgarzik)
-
- LK1.1.3 25 April 2000, Andrew Morton <andrewm@uow.edu.au>
- - Merged with 3c575_cb.c
- - Don't set RxComplete in boomerang interrupt enable reg
- - spinlock in vortex_timer to protect mdio functions
- - disable local interrupts around call to vortex_interrupt in
- vortex_tx_timeout() (So vortex_interrupt can use spin_lock())
- - Select window 3 in vortex_timer()'s write to Wn3_MAC_Ctrl
- - In vortex_start_xmit(), move the lock to _after_ we've altered
- vp->cur_tx and vp->tx_full. This defeats the race between
- vortex_start_xmit() and vortex_interrupt which was identified
- by Bogdan Costescu.
- - Merged back support for six new cards from various sources
- - Set vortex_have_pci if pci_module_init returns zero (fixes cardbus
- insertion oops)
- - Tell it that 3c905C has NWAY for 100bT autoneg
- - Fix handling of SetStatusEnd in 'Too much work..' code, as
- per 2.3.99's 3c575_cb (Dave Hinds).
- - Split ISR into two for vortex & boomerang
- - Fix MOD_INC/DEC races
- - Handle resource allocation failures.
- - Fix 3CCFE575CT LED polarity
- - Make tx_interrupt_mitigation the default
-
- LK1.1.4 25 April 2000, Andrew Morton <andrewm@uow.edu.au>
- - Add extra TxReset to vortex_up() to fix 575_cb hotplug initialisation probs.
- - Put vortex_info_tbl into __devinitdata
- - In the vortex_error StatsFull HACK, disable stats in vp->intr_enable as well
- as in the hardware.
- - Increased the loop counter in issue_and_wait from 2,000 to 4,000.
-
- LK1.1.5 28 April 2000, andrewm
- - Added powerpc defines (John Daniel <jdaniel@etresoft.com> said these work...)
- - Some extra diagnostics
- - In vortex_error(), reset the Tx on maxCollisions. Otherwise most
- chips usually get a Tx timeout.
- - Added extra_reset module parm
- - Replaced some inline timer manip with mod_timer
- (Franois romieu <Francois.Romieu@nic.fr>)
- - In vortex_up(), don't make Wn3_config initialisation dependent upon has_nway
- (this came across from 3c575_cb).
-
- LK1.1.6 06 Jun 2000, andrewm
- - Backed out the PPC defines.
- - Use del_timer_sync(), mod_timer().
- - Fix wrapped ulong comparison in boomerang_rx()
- - Add IS_TORNADO, use it to suppress 3c905C checksum error msg
- (Donald Becker, I Lee Hetherington <ilh@sls.lcs.mit.edu>)
- - Replace union wn3_config with BFINS/BFEXT manipulation for
- sparc64 (Pete Zaitcev, Peter Jones)
- - In vortex_error, do_tx_reset and vortex_tx_timeout(Vortex):
- do a netif_wake_queue() to better recover from errors. (Anders Pedersen,
- Donald Becker)
- - Print a warning on out-of-memory (rate limited to 1 per 10 secs)
- - Added two more Cardbus 575 NICs: 5b57 and 6564 (Paul Wagland)
-
- LK1.1.7 2 Jul 2000 andrewm
- - Better handling of shared IRQs
- - Reset the transmitter on a Tx reclaim error
- - Fixed crash under OOM during vortex_open() (Mark Hemment)
- - Fix Rx cessation problem during OOM (help from Mark Hemment)
- - The spinlocks around the mdio access were blocking interrupts for 300uS.
- Fix all this to use spin_lock_bh() within mdio_read/write
- - Only write to TxFreeThreshold if it's a boomerang - other NICs don't
- have one.
- - Added 802.3x MAC-layer flow control support
-
- LK1.1.8 13 Aug 2000 andrewm
- - Ignore request_region() return value - already reserved if Cardbus.
- - Merged some additional Cardbus flags from Don's 0.99Qk
- - Some fixes for 3c556 (Fred Maciel)
- - Fix for EISA initialisation (Jan Rekorajski)
- - Renamed MII_XCVR_PWR and EEPROM_230 to align with 3c575_cb and D. Becker's drivers
- - Fixed MII_XCVR_PWR for 3CCFE575CT
- - Added INVERT_LED_PWR, used it.
- - Backed out the extra_reset stuff
-
- LK1.1.9 12 Sep 2000 andrewm
- - Backed out the tx_reset_resume flags. It was a no-op.
- - In vortex_error, don't reset the Tx on txReclaim errors
- - In vortex_error, don't reset the Tx on maxCollisions errors.
- Hence backed out all the DownListPtr logic here.
- - In vortex_error, give Tornado cards a partial TxReset on
- maxCollisions (David Hinds). Defined MAX_COLLISION_RESET for this.
- - Redid some driver flags and device names based on pcmcia_cs-3.1.20.
- - Fixed a bug where, if vp->tx_full is set when the interface
- is downed, it remains set when the interface is upped. Bad
- things happen.
-
- LK1.1.10 17 Sep 2000 andrewm
- - Added EEPROM_8BIT for 3c555 (Fred Maciel)
- - Added experimental support for the 3c556B Laptop Hurricane (Louis Gerbarg)
- - Add HAS_NWAY to "3c900 Cyclone 10Mbps TPO"
-
- LK1.1.11 13 Nov 2000 andrewm
- - Dump MOD_INC/DEC_USE_COUNT, use SET_MODULE_OWNER
-
- LK1.1.12 1 Jan 2001 andrewm (2.4.0-pre1)
- - Call pci_enable_device before we request our IRQ (Tobias Ringstrom)
- - Add 3c590 PCI latency timer hack to vortex_probe1 (from 0.99Ra)
- - Added extended issue_and_wait for the 3c905CX.
- - Look for an MII on PHY index 24 first (3c905CX oddity).
- - Add HAS_NWAY to 3cSOHO100-TX (Brett Frankenberger)
- - Don't free skbs we don't own on oom path in vortex_open().
-
- LK1.1.13 27 Jan 2001
- - Added explicit `medialock' flag so we can truly
- lock the media type down with `options'.
- - "check ioremap return and some tidbits" (Arnaldo Carvalho de Melo <acme@conectiva.com.br>)
- - Added and used EEPROM_NORESET for 3c556B PM resumes.
- - Fixed leakage of vp->rx_ring.
- - Break out separate HAS_HWCKSM device capability flag.
- - Kill vp->tx_full (ANK)
- - Merge zerocopy fragment handling (ANK?)
-
- LK1.1.14 15 Feb 2001
- - Enable WOL. Can be turned on with `enable_wol' module option.
- - EISA and PCI initialisation fixes (jgarzik, Manfred Spraul)
- - If a device's internalconfig register reports it has NWAY,
- use it, even if autoselect is enabled.
-
- LK1.1.15 6 June 2001 akpm
- - Prevent double counting of received bytes (Lars Christensen)
- - Add ethtool support (jgarzik)
- - Add module parm descriptions (Andrzej M. Krzysztofowicz)
- - Implemented alloc_etherdev() API
- - Special-case the 'Tx error 82' message.
-
- LK1.1.16 18 July 2001 akpm
- - Make NETIF_F_SG dependent upon nr_free_highpages(), not on CONFIG_HIGHMEM
- - Lessen verbosity of bootup messages
- - Fix WOL - use new PM API functions.
- - Use netif_running() instead of vp->open in suspend/resume.
- - Don't reset the interface logic on open/close/rmmod. It upsets
- autonegotiation, and hence DHCP (from 0.99T).
- - Back out EEPROM_NORESET flag because of the above (we do it for all
- NICs).
- - Correct 3c982 identification string
- - Rename wait_for_completion() to issue_and_wait() to avoid completion.h
- clash.
-
- LK1.1.17 18Dec01 akpm
- - PCI ID 9805 is a Python-T, not a dual-port Cyclone. Apparently.
- And it has NWAY.
- - Mask our advertised modes (vp->advertising) with our capabilities
- (MII reg5) when deciding which duplex mode to use.
- - Add `global_options' as default for options[]. Ditto global_enable_wol,
- global_full_duplex.
-
- LK1.1.18 01Jul02 akpm
- - Fix for undocumented transceiver power-up bit on some 3c566B's
- (Donald Becker, Rahul Karnik)
-
- - See http://www.zip.com.au/~akpm/linux/#3c59x-2.3 for more details.
- - Also see Documentation/networking/vortex.txt
-
- LK1.1.19 10Nov02 Marc Zyngier <maz@wild-wind.fr.eu.org>
- - EISA sysfs integration.
*/
/*
regs = ioremap(pciaddr, CP_REGS_SIZE);
if (!regs) {
rc = -EIO;
- dev_err(&pdev->dev, "Cannot map PCI MMIO (%lx@%lx)\n",
+ dev_err(&pdev->dev, "Cannot map PCI MMIO (%Lx@%Lx)\n",
(unsigned long long)pci_resource_len(pdev, 1),
(unsigned long long)pciaddr);
goto err_out_res;
void __iomem *ioaddr = tp->mmio_addr;
unsigned int entry;
unsigned int len = skb->len;
+ unsigned long flags;
/* Calculate the next Tx descriptor entry. */
entry = tp->cur_tx % NUM_TX_DESC;
return 0;
}
- spin_lock_irq(&tp->lock);
+ spin_lock_irqsave(&tp->lock, flags);
RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx)
netif_stop_queue (dev);
- spin_unlock_irq(&tp->lock);
+ spin_unlock_irqrestore(&tp->lock, flags);
if (netif_msg_tx_queued(tp))
printk (KERN_DEBUG "%s: Queued Tx packet size %u to slot %d.\n",
skb = tx_buf->skb;
#ifdef BCM_TSO
/* partial BD completions possible with TSO packets */
- if (skb_shinfo(skb)->gso_size) {
+ if (skb_is_gso(skb)) {
u16 last_idx, last_ring_idx;
last_idx = sw_cons +
struct cpl_tx_pkt *cpl;
#ifdef NETIF_F_TSO
- if (skb_shinfo(skb)->gso_size) {
+ if (skb_is_gso(skb)) {
int eth_type;
struct cpl_tx_pkt_lso *hdr;
#ifdef NETIF_F_TSO
#include <net/checksum.h>
#endif
-#include <linux/workqueue.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/if_vlan.h>
#define E1000_MIN_RXD 80
#define E1000_MAX_82544_RXD 4096
+/* this is the size past which hardware will drop packets when setting LPE=0 */
+#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
+
/* Supported Rx Buffer Sizes */
#define E1000_RXBUFFER_128 128 /* Used for packet split */
#define E1000_RXBUFFER_256 256 /* Used for packet split */
#define AUTO_ALL_MODES 0
#define E1000_EEPROM_82544_APM 0x0004
+#define E1000_EEPROM_ICH8_APME 0x0004
#define E1000_EEPROM_APME 0x0400
#ifndef E1000_MASTER_SLAVE
spinlock_t tx_queue_lock;
#endif
atomic_t irq_sem;
- struct work_struct watchdog_task;
struct work_struct reset_task;
uint8_t fc_autoneg;
#ifdef NETIF_F_TSO
boolean_t tso_force;
#endif
+ boolean_t smart_power_down; /* phy smart power down */
+ unsigned long flags;
};
+enum e1000_state_t {
+ __E1000_DRIVER_TESTING,
+ __E1000_RESETTING,
+};
/* e1000_main.c */
extern char e1000_driver_name[];
int e1000_up(struct e1000_adapter *adapter);
void e1000_down(struct e1000_adapter *adapter);
void e1000_reset(struct e1000_adapter *adapter);
+void e1000_reinit_locked(struct e1000_adapter *adapter);
int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
SUPPORTED_1000baseT_Full|
SUPPORTED_Autoneg |
SUPPORTED_TP);
-
+ if (hw->phy_type == e1000_phy_ife)
+ ecmd->supported &= ~SUPPORTED_1000baseT_Full;
ecmd->advertising = ADVERTISED_TP;
if (hw->autoneg == 1) {
/* reset the link */
- if (netif_running(adapter->netdev)) {
- e1000_down(adapter);
- e1000_reset(adapter);
- e1000_up(adapter);
- } else
+ if (netif_running(adapter->netdev))
+ e1000_reinit_locked(adapter);
+ else
e1000_reset(adapter);
return 0;
hw->original_fc = hw->fc;
if (adapter->fc_autoneg == AUTONEG_ENABLE) {
- if (netif_running(adapter->netdev)) {
- e1000_down(adapter);
- e1000_up(adapter);
- } else
+ if (netif_running(adapter->netdev))
+ e1000_reinit_locked(adapter);
+ else
e1000_reset(adapter);
} else
return ((hw->media_type == e1000_media_type_fiber) ?
struct e1000_adapter *adapter = netdev_priv(netdev);
adapter->rx_csum = data;
- if (netif_running(netdev)) {
- e1000_down(adapter);
- e1000_up(adapter);
- } else
+ if (netif_running(netdev))
+ e1000_reinit_locked(adapter);
+ else
e1000_reset(adapter);
return 0;
}
case e1000_82572:
case e1000_82573:
case e1000_80003es2lan:
+ case e1000_ich8lan:
sprintf(firmware_version, "%d.%d-%d",
(eeprom_data & 0xF000) >> 12,
(eeprom_data & 0x0FF0) >> 4,
tx_ring_size = sizeof(struct e1000_tx_ring) * adapter->num_tx_queues;
rx_ring_size = sizeof(struct e1000_rx_ring) * adapter->num_rx_queues;
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+
if (netif_running(adapter->netdev))
e1000_down(adapter);
adapter->rx_ring = rx_new;
adapter->tx_ring = tx_new;
if ((err = e1000_up(adapter)))
- return err;
+ goto err_setup;
}
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+
return 0;
err_setup_tx:
e1000_free_all_rx_resources(adapter);
adapter->rx_ring = rx_old;
adapter->tx_ring = tx_old;
e1000_up(adapter);
+err_setup:
+ clear_bit(__E1000_RESETTING, &adapter->flags);
return err;
}
toggle = 0x7FFFF3FF;
break;
case e1000_82573:
+ case e1000_ich8lan:
toggle = 0x7FFFF033;
break;
default:
}
/* restore previous status */
E1000_WRITE_REG(&adapter->hw, STATUS, before);
-
- REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
- REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
- REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
- REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
+ if (adapter->hw.mac_type != e1000_ich8lan) {
+ REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
+ }
REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF);
REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
REG_PATTERN_TEST(RDLEN, 0x000FFF80, 0x000FFFFF);
REG_PATTERN_TEST(TDLEN, 0x000FFF80, 0x000FFFFF);
REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000);
- REG_SET_AND_CHECK(RCTL, 0x06DFB3FE, 0x003FFFFB);
+ before = (adapter->hw.mac_type == e1000_ich8lan ?
+ 0x06C3B33E : 0x06DFB3FE);
+ REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB);
REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000);
if (adapter->hw.mac_type >= e1000_82543) {
- REG_SET_AND_CHECK(RCTL, 0x06DFB3FE, 0xFFFFFFFF);
+ REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF);
REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
- REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
+ if (adapter->hw.mac_type != e1000_ich8lan)
+ REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF);
-
- for (i = 0; i < E1000_RAR_ENTRIES; i++) {
- REG_PATTERN_TEST(RA + ((i << 1) << 2), 0xFFFFFFFF,
- 0xFFFFFFFF);
+ value = (adapter->hw.mac_type == e1000_ich8lan ?
+ E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES);
+ for (i = 0; i < value; i++) {
REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF,
0xFFFFFFFF);
}
}
- for (i = 0; i < E1000_MC_TBL_SIZE; i++)
+ value = (adapter->hw.mac_type == e1000_ich8lan ?
+ E1000_MC_TBL_SIZE_ICH8LAN : E1000_MC_TBL_SIZE);
+ for (i = 0; i < value; i++)
REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF);
*data = 0;
/* Test each interrupt */
for (; i < 10; i++) {
+ if (adapter->hw.mac_type == e1000_ich8lan && i == 8)
+ continue;
/* Interrupt to test */
mask = 1 << i;
} else if (adapter->hw.phy_type == e1000_phy_gg82563) {
e1000_write_phy_reg(&adapter->hw,
GG82563_PHY_KMRN_MODE_CTRL,
- 0x1CE);
+ 0x1CC);
}
- /* force 1000, set loopback */
- e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x4140);
- /* Now set up the MAC to the same speed/duplex as the PHY. */
ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL);
- ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
- ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
- E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
- E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
- E1000_CTRL_FD); /* Force Duplex to FULL */
+
+ if (adapter->hw.phy_type == e1000_phy_ife) {
+ /* force 100, set loopback */
+ e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x6100);
+
+ /* Now set up the MAC to the same speed/duplex as the PHY. */
+ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_100 |/* Force Speed to 100 */
+ E1000_CTRL_FD); /* Force Duplex to FULL */
+ } else {
+ /* force 1000, set loopback */
+ e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x4140);
+
+ /* Now set up the MAC to the same speed/duplex as the PHY. */
+ ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL);
+ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
+ E1000_CTRL_FD); /* Force Duplex to FULL */
+ }
if (adapter->hw.media_type == e1000_media_type_copper &&
adapter->hw.phy_type == e1000_phy_m88) {
case e1000_82572:
case e1000_82573:
case e1000_80003es2lan:
+ case e1000_ich8lan:
return e1000_integrated_phy_loopback(adapter);
break;
struct e1000_adapter *adapter = netdev_priv(netdev);
boolean_t if_running = netif_running(netdev);
+ set_bit(__E1000_DRIVER_TESTING, &adapter->flags);
if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
/* Offline tests */
eth_test->flags |= ETH_TEST_FL_FAILED;
if (if_running)
- e1000_down(adapter);
+ /* indicate we're in test mode */
+ dev_close(netdev);
else
e1000_reset(adapter);
adapter->hw.autoneg = autoneg;
e1000_reset(adapter);
+ clear_bit(__E1000_DRIVER_TESTING, &adapter->flags);
if (if_running)
- e1000_up(adapter);
+ dev_open(netdev);
} else {
/* Online tests */
if (e1000_link_test(adapter, &data[4]))
data[1] = 0;
data[2] = 0;
data[3] = 0;
+
+ clear_bit(__E1000_DRIVER_TESTING, &adapter->flags);
}
msleep_interruptible(4 * 1000);
}
mod_timer(&adapter->blink_timer, jiffies);
msleep_interruptible(data * 1000);
del_timer_sync(&adapter->blink_timer);
- } else if (adapter->hw.mac_type < e1000_82573) {
- E1000_WRITE_REG(&adapter->hw, LEDCTL,
- (E1000_LEDCTL_LED2_BLINK_RATE |
- E1000_LEDCTL_LED0_BLINK | E1000_LEDCTL_LED2_BLINK |
- (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) |
- (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED0_MODE_SHIFT) |
- (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED1_MODE_SHIFT)));
+ } else if (adapter->hw.phy_type == e1000_phy_ife) {
+ if (!adapter->blink_timer.function) {
+ init_timer(&adapter->blink_timer);
+ adapter->blink_timer.function = e1000_led_blink_callback;
+ adapter->blink_timer.data = (unsigned long) adapter;
+ }
+ mod_timer(&adapter->blink_timer, jiffies);
msleep_interruptible(data * 1000);
+ del_timer_sync(&adapter->blink_timer);
+ e1000_write_phy_reg(&(adapter->hw), IFE_PHY_SPECIAL_CONTROL_LED, 0);
} else {
- E1000_WRITE_REG(&adapter->hw, LEDCTL,
- (E1000_LEDCTL_LED2_BLINK_RATE |
- E1000_LEDCTL_LED1_BLINK | E1000_LEDCTL_LED2_BLINK |
- (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) |
- (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED1_MODE_SHIFT) |
- (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED0_MODE_SHIFT)));
+ e1000_blink_led_start(&adapter->hw);
msleep_interruptible(data * 1000);
}
e1000_nway_reset(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- if (netif_running(netdev)) {
- e1000_down(adapter);
- e1000_up(adapter);
- }
+ if (netif_running(netdev))
+ e1000_reinit_locked(adapter);
return 0;
}
#define E1000_WRITE_REG_IO(a, reg, val) \
e1000_write_reg_io((a), E1000_##reg, val)
-static int32_t e1000_configure_kmrn_for_10_100(struct e1000_hw *hw);
+static int32_t e1000_configure_kmrn_for_10_100(struct e1000_hw *hw,
+ uint16_t duplex);
static int32_t e1000_configure_kmrn_for_1000(struct e1000_hw *hw);
/* IGP cable length table */
hw->phy_type = e1000_phy_igp;
break;
}
+ case IGP03E1000_E_PHY_ID:
+ hw->phy_type = e1000_phy_igp_3;
+ break;
+ case IFE_E_PHY_ID:
+ case IFE_PLUS_E_PHY_ID:
+ case IFE_C_E_PHY_ID:
+ hw->phy_type = e1000_phy_ife;
+ break;
case GG82563_E_PHY_ID:
if (hw->mac_type == e1000_80003es2lan) {
hw->phy_type = e1000_phy_gg82563;
break;
case E1000_DEV_ID_82541EI:
case E1000_DEV_ID_82541EI_MOBILE:
+ case E1000_DEV_ID_82541ER_LOM:
hw->mac_type = e1000_82541;
break;
case E1000_DEV_ID_82541ER:
hw->mac_type = e1000_82541_rev_2;
break;
case E1000_DEV_ID_82547EI:
+ case E1000_DEV_ID_82547EI_MOBILE:
hw->mac_type = e1000_82547;
break;
case E1000_DEV_ID_82547GI:
case E1000_DEV_ID_82572EI_COPPER:
case E1000_DEV_ID_82572EI_FIBER:
case E1000_DEV_ID_82572EI_SERDES:
+ case E1000_DEV_ID_82572EI:
hw->mac_type = e1000_82572;
break;
case E1000_DEV_ID_82573E:
case E1000_DEV_ID_82573L:
hw->mac_type = e1000_82573;
break;
+ case E1000_DEV_ID_80003ES2LAN_COPPER_SPT:
+ case E1000_DEV_ID_80003ES2LAN_SERDES_SPT:
case E1000_DEV_ID_80003ES2LAN_COPPER_DPT:
case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
hw->mac_type = e1000_80003es2lan;
break;
+ case E1000_DEV_ID_ICH8_IGP_M_AMT:
+ case E1000_DEV_ID_ICH8_IGP_AMT:
+ case E1000_DEV_ID_ICH8_IGP_C:
+ case E1000_DEV_ID_ICH8_IFE:
+ case E1000_DEV_ID_ICH8_IGP_M:
+ hw->mac_type = e1000_ich8lan;
+ break;
default:
/* Should never have loaded on this device */
return -E1000_ERR_MAC_TYPE;
}
switch(hw->mac_type) {
+ case e1000_ich8lan:
+ hw->swfwhw_semaphore_present = TRUE;
+ hw->asf_firmware_present = TRUE;
+ break;
case e1000_80003es2lan:
hw->swfw_sync_present = TRUE;
/* fall through */
case e1000_82542_rev2_1:
hw->media_type = e1000_media_type_fiber;
break;
+ case e1000_ich8lan:
case e1000_82573:
/* The STATUS_TBIMODE bit is reserved or reused for the this
* device.
} while(timeout);
}
+ /* Workaround for ICH8 bit corruption issue in FIFO memory */
+ if (hw->mac_type == e1000_ich8lan) {
+ /* Set Tx and Rx buffer allocation to 8k apiece. */
+ E1000_WRITE_REG(hw, PBA, E1000_PBA_8K);
+ /* Set Packet Buffer Size to 16k. */
+ E1000_WRITE_REG(hw, PBS, E1000_PBS_16K);
+ }
+
/* Issue a global reset to the MAC. This will reset the chip's
* transmit, receive, DMA, and link units. It will not effect
* the current PCI configuration. The global reset bit is self-
/* Reset is performed on a shadow of the control register */
E1000_WRITE_REG(hw, CTRL_DUP, (ctrl | E1000_CTRL_RST));
break;
+ case e1000_ich8lan:
+ if (!hw->phy_reset_disable &&
+ e1000_check_phy_reset_block(hw) == E1000_SUCCESS) {
+ /* e1000_ich8lan PHY HW reset requires MAC CORE reset
+ * at the same time to make sure the interface between
+ * MAC and the external PHY is reset.
+ */
+ ctrl |= E1000_CTRL_PHY_RST;
+ }
+
+ e1000_get_software_flag(hw);
+ E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_RST));
+ msec_delay(5);
+ break;
default:
E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_RST));
break;
/* fall through */
case e1000_82571:
case e1000_82572:
+ case e1000_ich8lan:
case e1000_80003es2lan:
ret_val = e1000_get_auto_rd_done(hw);
if(ret_val)
e1000_pci_set_mwi(hw);
}
+ if (hw->mac_type == e1000_ich8lan) {
+ uint32_t kab = E1000_READ_REG(hw, KABGTXD);
+ kab |= E1000_KABGTXD_BGSQLBIAS;
+ E1000_WRITE_REG(hw, KABGTXD, kab);
+ }
+
return E1000_SUCCESS;
}
/* Disabling VLAN filtering. */
DEBUGOUT("Initializing the IEEE VLAN\n");
- if (hw->mac_type < e1000_82545_rev_3)
- E1000_WRITE_REG(hw, VET, 0);
- e1000_clear_vfta(hw);
+ /* VET hardcoded to standard value and VFTA removed in ICH8 LAN */
+ if (hw->mac_type != e1000_ich8lan) {
+ if (hw->mac_type < e1000_82545_rev_3)
+ E1000_WRITE_REG(hw, VET, 0);
+ e1000_clear_vfta(hw);
+ }
/* For 82542 (rev 2.0), disable MWI and put the receiver into reset */
if(hw->mac_type == e1000_82542_rev2_0) {
/* Zero out the Multicast HASH table */
DEBUGOUT("Zeroing the MTA\n");
mta_size = E1000_MC_TBL_SIZE;
- for(i = 0; i < mta_size; i++)
+ if (hw->mac_type == e1000_ich8lan)
+ mta_size = E1000_MC_TBL_SIZE_ICH8LAN;
+ for(i = 0; i < mta_size; i++) {
E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
+ /* use write flush to prevent Memory Write Block (MWB) from
+ * occuring when accessing our register space */
+ E1000_WRITE_FLUSH(hw);
+ }
/* Set the PCI priority bit correctly in the CTRL register. This
* determines if the adapter gives priority to receives, or if it
break;
}
+ /* More time needed for PHY to initialize */
+ if (hw->mac_type == e1000_ich8lan)
+ msec_delay(15);
+
/* Call a subroutine to configure the link and setup flow control. */
ret_val = e1000_setup_link(hw);
case e1000_82571:
case e1000_82572:
case e1000_82573:
+ case e1000_ich8lan:
case e1000_80003es2lan:
ctrl |= E1000_TXDCTL_COUNT_DESC;
break;
/* Fall through */
case e1000_82571:
case e1000_82572:
+ case e1000_ich8lan:
ctrl = E1000_READ_REG(hw, TXDCTL1);
ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB;
if(hw->mac_type >= e1000_82571)
*/
e1000_clear_hw_cntrs(hw);
+ /* ICH8 No-snoop bits are opposite polarity.
+ * Set to snoop by default after reset. */
+ if (hw->mac_type == e1000_ich8lan)
+ e1000_set_pci_ex_no_snoop(hw, PCI_EX_82566_SNOOP_ALL);
+
if (hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER ||
hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) {
ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
*/
if (hw->fc == e1000_fc_default) {
switch (hw->mac_type) {
+ case e1000_ich8lan:
case e1000_82573:
hw->fc = e1000_fc_full;
break;
*/
DEBUGOUT("Initializing the Flow Control address, type and timer regs\n");
- E1000_WRITE_REG(hw, FCAL, FLOW_CONTROL_ADDRESS_LOW);
- E1000_WRITE_REG(hw, FCAH, FLOW_CONTROL_ADDRESS_HIGH);
- E1000_WRITE_REG(hw, FCT, FLOW_CONTROL_TYPE);
+ /* FCAL/H and FCT are hardcoded to standard values in e1000_ich8lan. */
+ if (hw->mac_type != e1000_ich8lan) {
+ E1000_WRITE_REG(hw, FCT, FLOW_CONTROL_TYPE);
+ E1000_WRITE_REG(hw, FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+ E1000_WRITE_REG(hw, FCAL, FLOW_CONTROL_ADDRESS_LOW);
+ }
E1000_WRITE_REG(hw, FCTTV, hw->fc_pause_time);
/* Wait 10ms for MAC to configure PHY from eeprom settings */
msec_delay(15);
-
+ if (hw->mac_type != e1000_ich8lan) {
/* Configure activity LED after PHY reset */
led_ctrl = E1000_READ_REG(hw, LEDCTL);
led_ctrl &= IGP_ACTIVITY_LED_MASK;
led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
E1000_WRITE_REG(hw, LEDCTL, led_ctrl);
+ }
/* disable lplu d3 during driver init */
ret_val = e1000_set_d3_lplu_state(hw, FALSE);
if (ret_val)
return ret_val;
- /* Enable Pass False Carrier on the PHY */
- phy_data |= GG82563_KMCR_PASS_FALSE_CARRIER;
+ phy_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,
phy_data);
phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
if(hw->disable_polarity_correction == 1)
phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
- if(ret_val)
- return ret_val;
-
- /* Force TX_CLK in the Extended PHY Specific Control Register
- * to 25MHz clock.
- */
- ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
- if(ret_val)
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
return ret_val;
- phy_data |= M88E1000_EPSCR_TX_CLK_25;
-
if (hw->phy_revision < M88E1011_I_REV_4) {
- /* Configure Master and Slave downshift values */
- phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
+ /* Force TX_CLK in the Extended PHY Specific Control Register
+ * to 25MHz clock.
+ */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+
+ if ((hw->phy_revision == E1000_REVISION_2) &&
+ (hw->phy_id == M88E1111_I_PHY_ID)) {
+ /* Vidalia Phy, set the downshift counter to 5x */
+ phy_data &= ~(M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK);
+ phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
+ ret_val = e1000_write_phy_reg(hw,
+ M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ } else {
+ /* Configure Master and Slave downshift values */
+ phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
- phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+ phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
- ret_val = e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
- if(ret_val)
- return ret_val;
+ ret_val = e1000_write_phy_reg(hw,
+ M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
}
/* SW Reset the PHY so all changes take effect */
if(hw->autoneg_advertised == 0)
hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+ /* IFE phy only supports 10/100 */
+ if (hw->phy_type == e1000_phy_ife)
+ hw->autoneg_advertised &= AUTONEG_ADVERTISE_10_100_ALL;
+
DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
ret_val = e1000_phy_setup_autoneg(hw);
if(ret_val) {
DEBUGFUNC("e1000_setup_copper_link");
+ switch (hw->mac_type) {
+ case e1000_80003es2lan:
+ case e1000_ich8lan:
+ /* Set the mac to wait the maximum time between each
+ * iteration and increase the max iterations when
+ * polling the phy; this fixes erroneous timeouts at 10Mbps. */
+ ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 4), 0xFFFF);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_kmrn_reg(hw, GG82563_REG(0x34, 9), ®_data);
+ if (ret_val)
+ return ret_val;
+ reg_data |= 0x3F;
+ ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 9), reg_data);
+ if (ret_val)
+ return ret_val;
+ default:
+ break;
+ }
+
/* Check if it is a valid PHY and set PHY mode if necessary. */
ret_val = e1000_copper_link_preconfig(hw);
if(ret_val)
switch (hw->mac_type) {
case e1000_80003es2lan:
- ret_val = e1000_read_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_INB_CTRL,
- ®_data);
- if (ret_val)
- return ret_val;
+ /* Kumeran registers are written-only */
+ reg_data = E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT;
reg_data |= E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING;
ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_INB_CTRL,
reg_data);
}
if (hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_3 ||
hw->phy_type == e1000_phy_igp_2) {
ret_val = e1000_copper_link_igp_setup(hw);
if(ret_val)
* hw - Struct containing variables accessed by shared code
******************************************************************************/
static int32_t
-e1000_configure_kmrn_for_10_100(struct e1000_hw *hw)
+e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, uint16_t duplex)
{
int32_t ret_val = E1000_SUCCESS;
uint32_t tipg;
tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_10_100;
E1000_WRITE_REG(hw, TIPG, tipg);
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data);
+
+ if (ret_val)
+ return ret_val;
+
+ if (duplex == HALF_DUPLEX)
+ reg_data |= GG82563_KMCR_PASS_FALSE_CARRIER;
+ else
+ reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
+
return ret_val;
}
tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000;
E1000_WRITE_REG(hw, TIPG, tipg);
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data);
+
+ if (ret_val)
+ return ret_val;
+
+ reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
+
return ret_val;
}
if(ret_val)
return ret_val;
- /* Read the MII 1000Base-T Control Register (Address 9). */
- ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
- if(ret_val)
- return ret_val;
+ if (hw->phy_type != e1000_phy_ife) {
+ /* Read the MII 1000Base-T Control Register (Address 9). */
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+ } else
+ mii_1000t_ctrl_reg=0;
/* Need to parse both autoneg_advertised and fc and set up
* the appropriate PHY registers. First we will parse for
if(hw->autoneg_advertised & ADVERTISE_1000_FULL) {
DEBUGOUT("Advertise 1000mb Full duplex\n");
mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
+ if (hw->phy_type == e1000_phy_ife) {
+ DEBUGOUT("e1000_phy_ife is a 10/100 PHY. Gigabit speed is not supported.\n");
+ }
}
/* Check for a software override of the flow control settings, and
DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
- ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
- if(ret_val)
- return ret_val;
+ if (hw->phy_type != e1000_phy_ife) {
+ ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+ }
return E1000_SUCCESS;
}
/* Need to reset the PHY or these changes will be ignored */
mii_ctrl_reg |= MII_CR_RESET;
+ /* Disable MDI-X support for 10/100 */
+ } else if (hw->phy_type == e1000_phy_ife) {
+ ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IFE_PMC_AUTO_MDIX;
+ phy_data &= ~IFE_PMC_FORCE_MDIX;
+
+ ret_val = e1000_write_phy_reg(hw, IFE_PHY_MDIX_CONTROL, phy_data);
+ if (ret_val)
+ return ret_val;
} else {
/* Clear Auto-Crossover to force MDI manually. IGP requires MDI
* forced whenever speed or duplex are forced.
*/
if(hw->tbi_compatibility_en) {
uint16_t speed, duplex;
- e1000_get_speed_and_duplex(hw, &speed, &duplex);
- if(speed != SPEED_1000) {
+ ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ DEBUGOUT("Error getting link speed and duplex\n");
+ return ret_val;
+ }
+ if (speed != SPEED_1000) {
/* If link speed is not set to gigabit speed, we do not need
* to enable TBI compatibility.
*/
if (*speed == SPEED_1000)
ret_val = e1000_configure_kmrn_for_1000(hw);
else
- ret_val = e1000_configure_kmrn_for_10_100(hw);
+ ret_val = e1000_configure_kmrn_for_10_100(hw, *duplex);
+ if (ret_val)
+ return ret_val;
+ }
+
+ if ((hw->phy_type == e1000_phy_igp_3) && (*speed == SPEED_1000)) {
+ ret_val = e1000_kumeran_lock_loss_workaround(hw);
if (ret_val)
return ret_val;
}
DEBUGFUNC("e1000_swfw_sync_acquire");
+ if (hw->swfwhw_semaphore_present)
+ return e1000_get_software_flag(hw);
+
if (!hw->swfw_sync_present)
return e1000_get_hw_eeprom_semaphore(hw);
DEBUGFUNC("e1000_swfw_sync_release");
+ if (hw->swfwhw_semaphore_present) {
+ e1000_release_software_flag(hw);
+ return;
+ }
+
if (!hw->swfw_sync_present) {
e1000_put_hw_eeprom_semaphore(hw);
return;
if (e1000_swfw_sync_acquire(hw, swfw))
return -E1000_ERR_SWFW_SYNC;
- if((hw->phy_type == e1000_phy_igp ||
+ if ((hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_3 ||
hw->phy_type == e1000_phy_igp_2) &&
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
if (e1000_swfw_sync_acquire(hw, swfw))
return -E1000_ERR_SWFW_SYNC;
- if((hw->phy_type == e1000_phy_igp ||
+ if ((hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_3 ||
hw->phy_type == e1000_phy_igp_2) &&
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
E1000_WRITE_FLUSH(hw);
if (hw->mac_type >= e1000_82571)
- msec_delay(10);
+ msec_delay_irq(10);
e1000_swfw_sync_release(hw, swfw);
} else {
/* Read the Extended Device Control Register, assert the PHY_RESET_DIR
ret_val = e1000_get_phy_cfg_done(hw);
e1000_release_software_semaphore(hw);
+ if ((hw->mac_type == e1000_ich8lan) &&
+ (hw->phy_type == e1000_phy_igp_3)) {
+ ret_val = e1000_init_lcd_from_nvm(hw);
+ if (ret_val)
+ return ret_val;
+ }
return ret_val;
}
case e1000_82541_rev_2:
case e1000_82571:
case e1000_82572:
+ case e1000_ich8lan:
ret_val = e1000_phy_hw_reset(hw);
if(ret_val)
return ret_val;
+
break;
default:
ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
return E1000_SUCCESS;
}
+/******************************************************************************
+* Work-around for 82566 power-down: on D3 entry-
+* 1) disable gigabit link
+* 2) write VR power-down enable
+* 3) read it back
+* if successful continue, else issue LCD reset and repeat
+*
+* hw - struct containing variables accessed by shared code
+******************************************************************************/
+void
+e1000_phy_powerdown_workaround(struct e1000_hw *hw)
+{
+ int32_t reg;
+ uint16_t phy_data;
+ int32_t retry = 0;
+
+ DEBUGFUNC("e1000_phy_powerdown_workaround");
+
+ if (hw->phy_type != e1000_phy_igp_3)
+ return;
+
+ do {
+ /* Disable link */
+ reg = E1000_READ_REG(hw, PHY_CTRL);
+ E1000_WRITE_REG(hw, PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE |
+ E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
+
+ /* Write VR power-down enable */
+ e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data);
+ e1000_write_phy_reg(hw, IGP3_VR_CTRL, phy_data |
+ IGP3_VR_CTRL_MODE_SHUT);
+
+ /* Read it back and test */
+ e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data);
+ if ((phy_data & IGP3_VR_CTRL_MODE_SHUT) || retry)
+ break;
+
+ /* Issue PHY reset and repeat at most one more time */
+ reg = E1000_READ_REG(hw, CTRL);
+ E1000_WRITE_REG(hw, CTRL, reg | E1000_CTRL_PHY_RST);
+ retry++;
+ } while (retry);
+
+ return;
+
+}
+
+/******************************************************************************
+* Work-around for 82566 Kumeran PCS lock loss:
+* On link status change (i.e. PCI reset, speed change) and link is up and
+* speed is gigabit-
+* 0) if workaround is optionally disabled do nothing
+* 1) wait 1ms for Kumeran link to come up
+* 2) check Kumeran Diagnostic register PCS lock loss bit
+* 3) if not set the link is locked (all is good), otherwise...
+* 4) reset the PHY
+* 5) repeat up to 10 times
+* Note: this is only called for IGP3 copper when speed is 1gb.
+*
+* hw - struct containing variables accessed by shared code
+******************************************************************************/
+int32_t
+e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw)
+{
+ int32_t ret_val;
+ int32_t reg;
+ int32_t cnt;
+ uint16_t phy_data;
+
+ if (hw->kmrn_lock_loss_workaround_disabled)
+ return E1000_SUCCESS;
+
+ /* Make sure link is up before proceeding. If not just return.
+ * Attempting this while link is negotiating fouls up link
+ * stability */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+
+ if (phy_data & MII_SR_LINK_STATUS) {
+ for (cnt = 0; cnt < 10; cnt++) {
+ /* read once to clear */
+ ret_val = e1000_read_phy_reg(hw, IGP3_KMRN_DIAG, &phy_data);
+ if (ret_val)
+ return ret_val;
+ /* and again to get new status */
+ ret_val = e1000_read_phy_reg(hw, IGP3_KMRN_DIAG, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* check for PCS lock */
+ if (!(phy_data & IGP3_KMRN_DIAG_PCS_LOCK_LOSS))
+ return E1000_SUCCESS;
+
+ /* Issue PHY reset */
+ e1000_phy_hw_reset(hw);
+ msec_delay_irq(5);
+ }
+ /* Disable GigE link negotiation */
+ reg = E1000_READ_REG(hw, PHY_CTRL);
+ E1000_WRITE_REG(hw, PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE |
+ E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
+
+ /* unable to acquire PCS lock */
+ return E1000_ERR_PHY;
+ }
+
+ return E1000_SUCCESS;
+}
+
/******************************************************************************
* Probes the expected PHY address for known PHY IDs
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
-static int32_t
+int32_t
e1000_detect_gig_phy(struct e1000_hw *hw)
{
int32_t phy_init_status, ret_val;
/* The 82571 firmware may still be configuring the PHY. In this
* case, we cannot access the PHY until the configuration is done. So
* we explicitly set the PHY values. */
- if(hw->mac_type == e1000_82571 ||
- hw->mac_type == e1000_82572) {
+ if (hw->mac_type == e1000_82571 ||
+ hw->mac_type == e1000_82572) {
hw->phy_id = IGP01E1000_I_PHY_ID;
hw->phy_type = e1000_phy_igp_2;
return E1000_SUCCESS;
/* Read the PHY ID Registers to identify which PHY is onboard. */
ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high);
- if(ret_val)
+ if (ret_val)
return ret_val;
hw->phy_id = (uint32_t) (phy_id_high << 16);
case e1000_80003es2lan:
if (hw->phy_id == GG82563_E_PHY_ID) match = TRUE;
break;
+ case e1000_ich8lan:
+ if (hw->phy_id == IGP03E1000_E_PHY_ID) match = TRUE;
+ if (hw->phy_id == IFE_E_PHY_ID) match = TRUE;
+ if (hw->phy_id == IFE_PLUS_E_PHY_ID) match = TRUE;
+ if (hw->phy_id == IFE_C_E_PHY_ID) match = TRUE;
+ break;
default:
DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type);
return -E1000_ERR_CONFIG;
return E1000_SUCCESS;
}
+/******************************************************************************
+* Get PHY information from various PHY registers for ife PHY only.
+*
+* hw - Struct containing variables accessed by shared code
+* phy_info - PHY information structure
+******************************************************************************/
+int32_t
+e1000_phy_ife_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info)
+{
+ int32_t ret_val;
+ uint16_t phy_data, polarity;
+
+ DEBUGFUNC("e1000_phy_ife_get_info");
+
+ phy_info->downshift = (e1000_downshift)hw->speed_downgraded;
+ phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal;
+
+ ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+ phy_info->polarity_correction =
+ (phy_data & IFE_PSC_AUTO_POLARITY_DISABLE) >>
+ IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT;
+
+ if (phy_info->polarity_correction == e1000_polarity_reversal_enabled) {
+ ret_val = e1000_check_polarity(hw, &polarity);
+ if (ret_val)
+ return ret_val;
+ } else {
+ /* Polarity is forced. */
+ polarity = (phy_data & IFE_PSC_FORCE_POLARITY) >>
+ IFE_PSC_FORCE_POLARITY_SHIFT;
+ }
+ phy_info->cable_polarity = polarity;
+
+ ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->mdix_mode =
+ (phy_data & (IFE_PMC_AUTO_MDIX | IFE_PMC_FORCE_MDIX)) >>
+ IFE_PMC_MDIX_MODE_SHIFT;
+
+ return E1000_SUCCESS;
+}
+
/******************************************************************************
* Get PHY information from various PHY registers fot m88 PHY only.
*
return -E1000_ERR_CONFIG;
}
- if(hw->phy_type == e1000_phy_igp ||
+ if (hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_3 ||
hw->phy_type == e1000_phy_igp_2)
return e1000_phy_igp_get_info(hw, phy_info);
+ else if (hw->phy_type == e1000_phy_ife)
+ return e1000_phy_ife_get_info(hw, phy_info);
else
return e1000_phy_m88_get_info(hw, phy_info);
}
eeprom->use_eerd = TRUE;
eeprom->use_eewr = FALSE;
break;
+ case e1000_ich8lan:
+ {
+ int32_t i = 0;
+ uint32_t flash_size = E1000_READ_ICH8_REG(hw, ICH8_FLASH_GFPREG);
+
+ eeprom->type = e1000_eeprom_ich8;
+ eeprom->use_eerd = FALSE;
+ eeprom->use_eewr = FALSE;
+ eeprom->word_size = E1000_SHADOW_RAM_WORDS;
+
+ /* Zero the shadow RAM structure. But don't load it from NVM
+ * so as to save time for driver init */
+ if (hw->eeprom_shadow_ram != NULL) {
+ for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
+ hw->eeprom_shadow_ram[i].modified = FALSE;
+ hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF;
+ }
+ }
+
+ hw->flash_base_addr = (flash_size & ICH8_GFPREG_BASE_MASK) *
+ ICH8_FLASH_SECTOR_SIZE;
+
+ hw->flash_bank_size = ((flash_size >> 16) & ICH8_GFPREG_BASE_MASK) + 1;
+ hw->flash_bank_size -= (flash_size & ICH8_GFPREG_BASE_MASK);
+ hw->flash_bank_size *= ICH8_FLASH_SECTOR_SIZE;
+ hw->flash_bank_size /= 2 * sizeof(uint16_t);
+
+ break;
+ }
default:
break;
}
return ret_val;
}
- if(eeprom->type == e1000_eeprom_spi) {
+ if (eeprom->type == e1000_eeprom_ich8)
+ return e1000_read_eeprom_ich8(hw, offset, words, data);
+
+ if (eeprom->type == e1000_eeprom_spi) {
uint16_t word_in;
uint8_t read_opcode = EEPROM_READ_OPCODE_SPI;
DEBUGFUNC("e1000_is_onboard_nvm_eeprom");
- if(hw->mac_type == e1000_82573) {
+ if (hw->mac_type == e1000_ich8lan)
+ return FALSE;
+
+ if (hw->mac_type == e1000_82573) {
eecd = E1000_READ_REG(hw, EECD);
/* Isolate bits 15 & 16 */
}
}
- for(i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
- if(e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
+ if (hw->mac_type == e1000_ich8lan) {
+ /* Drivers must allocate the shadow ram structure for the
+ * EEPROM checksum to be updated. Otherwise, this bit as well
+ * as the checksum must both be set correctly for this
+ * validation to pass.
+ */
+ e1000_read_eeprom(hw, 0x19, 1, &eeprom_data);
+ if ((eeprom_data & 0x40) == 0) {
+ eeprom_data |= 0x40;
+ e1000_write_eeprom(hw, 0x19, 1, &eeprom_data);
+ e1000_update_eeprom_checksum(hw);
+ }
+ }
+
+ for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
+ if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
DEBUGOUT("EEPROM Read Error\n");
return -E1000_ERR_EEPROM;
}
int32_t
e1000_update_eeprom_checksum(struct e1000_hw *hw)
{
+ uint32_t ctrl_ext;
uint16_t checksum = 0;
uint16_t i, eeprom_data;
return -E1000_ERR_EEPROM;
} else if (hw->eeprom.type == e1000_eeprom_flash) {
e1000_commit_shadow_ram(hw);
+ } else if (hw->eeprom.type == e1000_eeprom_ich8) {
+ e1000_commit_shadow_ram(hw);
+ /* Reload the EEPROM, or else modifications will not appear
+ * until after next adapter reset. */
+ ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+ E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
+ msec_delay(10);
}
return E1000_SUCCESS;
}
if(eeprom->use_eewr == TRUE)
return e1000_write_eeprom_eewr(hw, offset, words, data);
+ if (eeprom->type == e1000_eeprom_ich8)
+ return e1000_write_eeprom_ich8(hw, offset, words, data);
+
/* Prepare the EEPROM for writing */
if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
return -E1000_ERR_EEPROM;
uint32_t flop = 0;
uint32_t i = 0;
int32_t error = E1000_SUCCESS;
-
- /* The flop register will be used to determine if flash type is STM */
- flop = E1000_READ_REG(hw, FLOP);
+ uint32_t old_bank_offset = 0;
+ uint32_t new_bank_offset = 0;
+ uint32_t sector_retries = 0;
+ uint8_t low_byte = 0;
+ uint8_t high_byte = 0;
+ uint8_t temp_byte = 0;
+ boolean_t sector_write_failed = FALSE;
if (hw->mac_type == e1000_82573) {
+ /* The flop register will be used to determine if flash type is STM */
+ flop = E1000_READ_REG(hw, FLOP);
for (i=0; i < attempts; i++) {
eecd = E1000_READ_REG(hw, EECD);
if ((eecd & E1000_EECD_FLUPD) == 0) {
}
}
+ if (hw->mac_type == e1000_ich8lan && hw->eeprom_shadow_ram != NULL) {
+ /* We're writing to the opposite bank so if we're on bank 1,
+ * write to bank 0 etc. We also need to erase the segment that
+ * is going to be written */
+ if (!(E1000_READ_REG(hw, EECD) & E1000_EECD_SEC1VAL)) {
+ new_bank_offset = hw->flash_bank_size * 2;
+ old_bank_offset = 0;
+ e1000_erase_ich8_4k_segment(hw, 1);
+ } else {
+ old_bank_offset = hw->flash_bank_size * 2;
+ new_bank_offset = 0;
+ e1000_erase_ich8_4k_segment(hw, 0);
+ }
+
+ do {
+ sector_write_failed = FALSE;
+ /* Loop for every byte in the shadow RAM,
+ * which is in units of words. */
+ for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
+ /* Determine whether to write the value stored
+ * in the other NVM bank or a modified value stored
+ * in the shadow RAM */
+ if (hw->eeprom_shadow_ram[i].modified == TRUE) {
+ low_byte = (uint8_t)hw->eeprom_shadow_ram[i].eeprom_word;
+ e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset,
+ &temp_byte);
+ udelay(100);
+ error = e1000_verify_write_ich8_byte(hw,
+ (i << 1) + new_bank_offset,
+ low_byte);
+ if (error != E1000_SUCCESS)
+ sector_write_failed = TRUE;
+ high_byte =
+ (uint8_t)(hw->eeprom_shadow_ram[i].eeprom_word >> 8);
+ e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1,
+ &temp_byte);
+ udelay(100);
+ } else {
+ e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset,
+ &low_byte);
+ udelay(100);
+ error = e1000_verify_write_ich8_byte(hw,
+ (i << 1) + new_bank_offset, low_byte);
+ if (error != E1000_SUCCESS)
+ sector_write_failed = TRUE;
+ e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1,
+ &high_byte);
+ }
+
+ /* If the word is 0x13, then make sure the signature bits
+ * (15:14) are 11b until the commit has completed.
+ * This will allow us to write 10b which indicates the
+ * signature is valid. We want to do this after the write
+ * has completed so that we don't mark the segment valid
+ * while the write is still in progress */
+ if (i == E1000_ICH8_NVM_SIG_WORD)
+ high_byte = E1000_ICH8_NVM_SIG_MASK | high_byte;
+
+ error = e1000_verify_write_ich8_byte(hw,
+ (i << 1) + new_bank_offset + 1, high_byte);
+ if (error != E1000_SUCCESS)
+ sector_write_failed = TRUE;
+
+ if (sector_write_failed == FALSE) {
+ /* Clear the now not used entry in the cache */
+ hw->eeprom_shadow_ram[i].modified = FALSE;
+ hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF;
+ }
+ }
+
+ /* Don't bother writing the segment valid bits if sector
+ * programming failed. */
+ if (sector_write_failed == FALSE) {
+ /* Finally validate the new segment by setting bit 15:14
+ * to 10b in word 0x13 , this can be done without an
+ * erase as well since these bits are 11 to start with
+ * and we need to change bit 14 to 0b */
+ e1000_read_ich8_byte(hw,
+ E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset,
+ &high_byte);
+ high_byte &= 0xBF;
+ error = e1000_verify_write_ich8_byte(hw,
+ E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset,
+ high_byte);
+ if (error != E1000_SUCCESS)
+ sector_write_failed = TRUE;
+
+ /* And invalidate the previously valid segment by setting
+ * its signature word (0x13) high_byte to 0b. This can be
+ * done without an erase because flash erase sets all bits
+ * to 1's. We can write 1's to 0's without an erase */
+ error = e1000_verify_write_ich8_byte(hw,
+ E1000_ICH8_NVM_SIG_WORD * 2 + 1 + old_bank_offset,
+ 0);
+ if (error != E1000_SUCCESS)
+ sector_write_failed = TRUE;
+ }
+ } while (++sector_retries < 10 && sector_write_failed == TRUE);
+ }
+
return error;
}
* the other port. */
if ((hw->mac_type == e1000_82571) && (hw->laa_is_present == TRUE))
rar_num -= 1;
+ if (hw->mac_type == e1000_ich8lan)
+ rar_num = E1000_RAR_ENTRIES_ICH8LAN;
+
/* Zero out the other 15 receive addresses. */
DEBUGOUT("Clearing RAR[1-15]\n");
for(i = 1; i < rar_num; i++) {
E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+ E1000_WRITE_FLUSH(hw);
E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+ E1000_WRITE_FLUSH(hw);
}
}
-#if 0
/******************************************************************************
* Updates the MAC's list of multicast addresses.
*
/* Clear RAR[1-15] */
DEBUGOUT(" Clearing RAR[1-15]\n");
num_rar_entry = E1000_RAR_ENTRIES;
+ if (hw->mac_type == e1000_ich8lan)
+ num_rar_entry = E1000_RAR_ENTRIES_ICH8LAN;
/* Reserve a spot for the Locally Administered Address to work around
* an 82571 issue in which a reset on one port will reload the MAC on
* the other port. */
for(i = rar_used_count; i < num_rar_entry; i++) {
E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+ E1000_WRITE_FLUSH(hw);
E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+ E1000_WRITE_FLUSH(hw);
}
/* Clear the MTA */
DEBUGOUT(" Clearing MTA\n");
num_mta_entry = E1000_NUM_MTA_REGISTERS;
+ if (hw->mac_type == e1000_ich8lan)
+ num_mta_entry = E1000_NUM_MTA_REGISTERS_ICH8LAN;
for(i = 0; i < num_mta_entry; i++) {
E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
+ E1000_WRITE_FLUSH(hw);
}
/* Add the new addresses */
}
DEBUGOUT("MC Update Complete\n");
}
-#endif /* 0 */
/******************************************************************************
* Hashes an address to determine its location in the multicast table
* LSB MSB
*/
case 0:
- /* [47:36] i.e. 0x563 for above example address */
- hash_value = ((mc_addr[4] >> 4) | (((uint16_t) mc_addr[5]) << 4));
+ if (hw->mac_type == e1000_ich8lan) {
+ /* [47:38] i.e. 0x158 for above example address */
+ hash_value = ((mc_addr[4] >> 6) | (((uint16_t) mc_addr[5]) << 2));
+ } else {
+ /* [47:36] i.e. 0x563 for above example address */
+ hash_value = ((mc_addr[4] >> 4) | (((uint16_t) mc_addr[5]) << 4));
+ }
break;
case 1:
- /* [46:35] i.e. 0xAC6 for above example address */
- hash_value = ((mc_addr[4] >> 3) | (((uint16_t) mc_addr[5]) << 5));
+ if (hw->mac_type == e1000_ich8lan) {
+ /* [46:37] i.e. 0x2B1 for above example address */
+ hash_value = ((mc_addr[4] >> 5) | (((uint16_t) mc_addr[5]) << 3));
+ } else {
+ /* [46:35] i.e. 0xAC6 for above example address */
+ hash_value = ((mc_addr[4] >> 3) | (((uint16_t) mc_addr[5]) << 5));
+ }
break;
case 2:
- /* [45:34] i.e. 0x5D8 for above example address */
- hash_value = ((mc_addr[4] >> 2) | (((uint16_t) mc_addr[5]) << 6));
+ if (hw->mac_type == e1000_ich8lan) {
+ /*[45:36] i.e. 0x163 for above example address */
+ hash_value = ((mc_addr[4] >> 4) | (((uint16_t) mc_addr[5]) << 4));
+ } else {
+ /* [45:34] i.e. 0x5D8 for above example address */
+ hash_value = ((mc_addr[4] >> 2) | (((uint16_t) mc_addr[5]) << 6));
+ }
break;
case 3:
- /* [43:32] i.e. 0x634 for above example address */
- hash_value = ((mc_addr[4]) | (((uint16_t) mc_addr[5]) << 8));
+ if (hw->mac_type == e1000_ich8lan) {
+ /* [43:34] i.e. 0x18D for above example address */
+ hash_value = ((mc_addr[4] >> 2) | (((uint16_t) mc_addr[5]) << 6));
+ } else {
+ /* [43:32] i.e. 0x634 for above example address */
+ hash_value = ((mc_addr[4]) | (((uint16_t) mc_addr[5]) << 8));
+ }
break;
}
hash_value &= 0xFFF;
+ if (hw->mac_type == e1000_ich8lan)
+ hash_value &= 0x3FF;
return hash_value;
}
* register are determined by the lower 5 bits of the value.
*/
hash_reg = (hash_value >> 5) & 0x7F;
+ if (hw->mac_type == e1000_ich8lan)
+ hash_reg &= 0x1F;
hash_bit = hash_value & 0x1F;
mta = E1000_READ_REG_ARRAY(hw, MTA, hash_reg);
if((hw->mac_type == e1000_82544) && ((hash_reg & 0x1) == 1)) {
temp = E1000_READ_REG_ARRAY(hw, MTA, (hash_reg - 1));
E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta);
+ E1000_WRITE_FLUSH(hw);
E1000_WRITE_REG_ARRAY(hw, MTA, (hash_reg - 1), temp);
+ E1000_WRITE_FLUSH(hw);
} else {
E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta);
+ E1000_WRITE_FLUSH(hw);
}
}
}
E1000_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low);
+ E1000_WRITE_FLUSH(hw);
E1000_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high);
+ E1000_WRITE_FLUSH(hw);
}
/******************************************************************************
{
uint32_t temp;
- if((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) {
+ if (hw->mac_type == e1000_ich8lan)
+ return;
+
+ if ((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) {
temp = E1000_READ_REG_ARRAY(hw, VFTA, (offset - 1));
E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+ E1000_WRITE_FLUSH(hw);
E1000_WRITE_REG_ARRAY(hw, VFTA, (offset - 1), temp);
+ E1000_WRITE_FLUSH(hw);
} else {
E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+ E1000_WRITE_FLUSH(hw);
}
}
uint32_t vfta_offset = 0;
uint32_t vfta_bit_in_reg = 0;
+ if (hw->mac_type == e1000_ich8lan)
+ return;
+
if (hw->mac_type == e1000_82573) {
if (hw->mng_cookie.vlan_id != 0) {
/* The VFTA is a 4096b bit-field, each identifying a single VLAN
* manageability unit */
vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value);
+ E1000_WRITE_FLUSH(hw);
}
}
DEBUGOUT("EEPROM Read Error\n");
return -E1000_ERR_EEPROM;
}
- if((eeprom_data== ID_LED_RESERVED_0000) ||
- (eeprom_data == ID_LED_RESERVED_FFFF)) eeprom_data = ID_LED_DEFAULT;
- for(i = 0; i < 4; i++) {
+
+ if ((hw->mac_type == e1000_82573) &&
+ (eeprom_data == ID_LED_RESERVED_82573))
+ eeprom_data = ID_LED_DEFAULT_82573;
+ else if ((eeprom_data == ID_LED_RESERVED_0000) ||
+ (eeprom_data == ID_LED_RESERVED_FFFF)) {
+ if (hw->mac_type == e1000_ich8lan)
+ eeprom_data = ID_LED_DEFAULT_ICH8LAN;
+ else
+ eeprom_data = ID_LED_DEFAULT;
+ }
+ for (i = 0; i < 4; i++) {
temp = (eeprom_data >> (i << 2)) & led_mask;
switch(temp) {
case ID_LED_ON1_DEF2:
return E1000_SUCCESS;
}
+/******************************************************************************
+ * Used on 82571 and later Si that has LED blink bits.
+ * Callers must use their own timer and should have already called
+ * e1000_id_led_init()
+ * Call e1000_cleanup led() to stop blinking
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+int32_t
+e1000_blink_led_start(struct e1000_hw *hw)
+{
+ int16_t i;
+ uint32_t ledctl_blink = 0;
+
+ DEBUGFUNC("e1000_id_led_blink_on");
+
+ if (hw->mac_type < e1000_82571) {
+ /* Nothing to do */
+ return E1000_SUCCESS;
+ }
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* always blink LED0 for PCI-E fiber */
+ ledctl_blink = E1000_LEDCTL_LED0_BLINK |
+ (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
+ } else {
+ /* set the blink bit for each LED that's "on" (0x0E) in ledctl_mode2 */
+ ledctl_blink = hw->ledctl_mode2;
+ for (i=0; i < 4; i++)
+ if (((hw->ledctl_mode2 >> (i * 8)) & 0xFF) ==
+ E1000_LEDCTL_MODE_LED_ON)
+ ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << (i * 8));
+ }
+
+ E1000_WRITE_REG(hw, LEDCTL, ledctl_blink);
+
+ return E1000_SUCCESS;
+}
+
/******************************************************************************
* Restores the saved state of the SW controlable LED.
*
return ret_val;
/* Fall Through */
default:
+ if (hw->phy_type == e1000_phy_ife) {
+ e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
+ break;
+ }
/* Restore LEDCTL settings */
E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_default);
break;
/* Clear SW Defineable Pin 0 to turn on the LED */
ctrl &= ~E1000_CTRL_SWDPIN0;
ctrl |= E1000_CTRL_SWDPIO0;
- } else if(hw->media_type == e1000_media_type_copper) {
+ } else if (hw->phy_type == e1000_phy_ife) {
+ e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED,
+ (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_ON));
+ } else if (hw->media_type == e1000_media_type_copper) {
E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_mode2);
return E1000_SUCCESS;
}
/* Set SW Defineable Pin 0 to turn off the LED */
ctrl |= E1000_CTRL_SWDPIN0;
ctrl |= E1000_CTRL_SWDPIO0;
- } else if(hw->media_type == e1000_media_type_copper) {
+ } else if (hw->phy_type == e1000_phy_ife) {
+ e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED,
+ (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_OFF));
+ } else if (hw->media_type == e1000_media_type_copper) {
E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_mode1);
return E1000_SUCCESS;
}
temp = E1000_READ_REG(hw, XOFFRXC);
temp = E1000_READ_REG(hw, XOFFTXC);
temp = E1000_READ_REG(hw, FCRUC);
+
+ if (hw->mac_type != e1000_ich8lan) {
temp = E1000_READ_REG(hw, PRC64);
temp = E1000_READ_REG(hw, PRC127);
temp = E1000_READ_REG(hw, PRC255);
temp = E1000_READ_REG(hw, PRC511);
temp = E1000_READ_REG(hw, PRC1023);
temp = E1000_READ_REG(hw, PRC1522);
+ }
+
temp = E1000_READ_REG(hw, GPRC);
temp = E1000_READ_REG(hw, BPRC);
temp = E1000_READ_REG(hw, MPRC);
temp = E1000_READ_REG(hw, TOTH);
temp = E1000_READ_REG(hw, TPR);
temp = E1000_READ_REG(hw, TPT);
+
+ if (hw->mac_type != e1000_ich8lan) {
temp = E1000_READ_REG(hw, PTC64);
temp = E1000_READ_REG(hw, PTC127);
temp = E1000_READ_REG(hw, PTC255);
temp = E1000_READ_REG(hw, PTC511);
temp = E1000_READ_REG(hw, PTC1023);
temp = E1000_READ_REG(hw, PTC1522);
+ }
+
temp = E1000_READ_REG(hw, MPTC);
temp = E1000_READ_REG(hw, BPTC);
temp = E1000_READ_REG(hw, IAC);
temp = E1000_READ_REG(hw, ICRXOC);
+
+ if (hw->mac_type == e1000_ich8lan) return;
+
temp = E1000_READ_REG(hw, ICRXPTC);
temp = E1000_READ_REG(hw, ICRXATC);
temp = E1000_READ_REG(hw, ICTXPTC);
hw->bus_width = e1000_bus_width_pciex_1;
break;
case e1000_82571:
+ case e1000_ich8lan:
case e1000_80003es2lan:
hw->bus_type = e1000_bus_type_pci_express;
hw->bus_speed = e1000_bus_speed_2500;
break;
}
}
-
-#if 0
/******************************************************************************
* Reads a value from one of the devices registers using port I/O (as opposed
* memory mapped I/O). Only 82544 and newer devices support port I/O.
e1000_io_write(hw, io_addr, offset);
return e1000_io_read(hw, io_data);
}
-#endif /* 0 */
/******************************************************************************
* Writes a value to one of the devices registers using port I/O (as opposed to
{
int32_t ret_val;
uint16_t agc_value = 0;
- uint16_t cur_agc, min_agc = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
- uint16_t max_agc = 0;
uint16_t i, phy_data;
uint16_t cable_length;
break;
}
} else if(hw->phy_type == e1000_phy_igp) { /* For IGP PHY */
+ uint16_t cur_agc_value;
+ uint16_t min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
uint16_t agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
{IGP01E1000_PHY_AGC_A,
IGP01E1000_PHY_AGC_B,
if(ret_val)
return ret_val;
- cur_agc = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT;
+ cur_agc_value = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT;
- /* Array bound check. */
- if((cur_agc >= IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1) ||
- (cur_agc == 0))
+ /* Value bound check. */
+ if ((cur_agc_value >= IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1) ||
+ (cur_agc_value == 0))
return -E1000_ERR_PHY;
- agc_value += cur_agc;
+ agc_value += cur_agc_value;
/* Update minimal AGC value. */
- if(min_agc > cur_agc)
- min_agc = cur_agc;
+ if (min_agc_value > cur_agc_value)
+ min_agc_value = cur_agc_value;
}
/* Remove the minimal AGC result for length < 50m */
- if(agc_value < IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) {
- agc_value -= min_agc;
+ if (agc_value < IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) {
+ agc_value -= min_agc_value;
/* Get the average length of the remaining 3 channels */
agc_value /= (IGP01E1000_PHY_CHANNEL_NUM - 1);
IGP01E1000_AGC_RANGE) : 0;
*max_length = e1000_igp_cable_length_table[agc_value] +
IGP01E1000_AGC_RANGE;
- } else if (hw->phy_type == e1000_phy_igp_2) {
+ } else if (hw->phy_type == e1000_phy_igp_2 ||
+ hw->phy_type == e1000_phy_igp_3) {
+ uint16_t cur_agc_index, max_agc_index = 0;
+ uint16_t min_agc_index = IGP02E1000_AGC_LENGTH_TABLE_SIZE - 1;
uint16_t agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
{IGP02E1000_PHY_AGC_A,
IGP02E1000_PHY_AGC_B,
/* Getting bits 15:9, which represent the combination of course and
* fine gain values. The result is a number that can be put into
* the lookup table to obtain the approximate cable length. */
- cur_agc = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
- IGP02E1000_AGC_LENGTH_MASK;
+ cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
+ IGP02E1000_AGC_LENGTH_MASK;
- /* Remove min & max AGC values from calculation. */
- if (e1000_igp_2_cable_length_table[min_agc] > e1000_igp_2_cable_length_table[cur_agc])
- min_agc = cur_agc;
- if (e1000_igp_2_cable_length_table[max_agc] < e1000_igp_2_cable_length_table[cur_agc])
- max_agc = cur_agc;
+ /* Array index bound check. */
+ if ((cur_agc_index >= IGP02E1000_AGC_LENGTH_TABLE_SIZE) ||
+ (cur_agc_index == 0))
+ return -E1000_ERR_PHY;
- agc_value += e1000_igp_2_cable_length_table[cur_agc];
+ /* Remove min & max AGC values from calculation. */
+ if (e1000_igp_2_cable_length_table[min_agc_index] >
+ e1000_igp_2_cable_length_table[cur_agc_index])
+ min_agc_index = cur_agc_index;
+ if (e1000_igp_2_cable_length_table[max_agc_index] <
+ e1000_igp_2_cable_length_table[cur_agc_index])
+ max_agc_index = cur_agc_index;
+
+ agc_value += e1000_igp_2_cable_length_table[cur_agc_index];
}
- agc_value -= (e1000_igp_2_cable_length_table[min_agc] + e1000_igp_2_cable_length_table[max_agc]);
+ agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] +
+ e1000_igp_2_cable_length_table[max_agc_index]);
agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2);
/* Calculate cable length with the error range of +/- 10 meters. */
return ret_val;
*polarity = (phy_data & M88E1000_PSSR_REV_POLARITY) >>
M88E1000_PSSR_REV_POLARITY_SHIFT;
- } else if(hw->phy_type == e1000_phy_igp ||
+ } else if (hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_3 ||
hw->phy_type == e1000_phy_igp_2) {
/* Read the Status register to check the speed */
ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS,
* 100 Mbps this bit is always 0) */
*polarity = phy_data & IGP01E1000_PSSR_POLARITY_REVERSED;
}
+ } else if (hw->phy_type == e1000_phy_ife) {
+ ret_val = e1000_read_phy_reg(hw, IFE_PHY_EXTENDED_STATUS_CONTROL,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ *polarity = (phy_data & IFE_PESC_POLARITY_REVERSED) >>
+ IFE_PESC_POLARITY_REVERSED_SHIFT;
}
return E1000_SUCCESS;
}
DEBUGFUNC("e1000_check_downshift");
- if(hw->phy_type == e1000_phy_igp ||
+ if (hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_3 ||
hw->phy_type == e1000_phy_igp_2) {
ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH,
&phy_data);
hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >>
M88E1000_PSSR_DOWNSHIFT_SHIFT;
+ } else if (hw->phy_type == e1000_phy_ife) {
+ /* e1000_phy_ife supports 10/100 speed only */
+ hw->speed_downgraded = FALSE;
}
return E1000_SUCCESS;
if(speed == SPEED_1000) {
- e1000_get_cable_length(hw, &min_length, &max_length);
+ ret_val = e1000_get_cable_length(hw, &min_length, &max_length);
+ if (ret_val)
+ return ret_val;
if((hw->dsp_config_state == e1000_dsp_config_enabled) &&
min_length >= e1000_igp_cable_length_50) {
e1000_set_d3_lplu_state(struct e1000_hw *hw,
boolean_t active)
{
+ uint32_t phy_ctrl = 0;
int32_t ret_val;
uint16_t phy_data;
DEBUGFUNC("e1000_set_d3_lplu_state");
- if(hw->phy_type != e1000_phy_igp && hw->phy_type != e1000_phy_igp_2)
+ if (hw->phy_type != e1000_phy_igp && hw->phy_type != e1000_phy_igp_2
+ && hw->phy_type != e1000_phy_igp_3)
return E1000_SUCCESS;
/* During driver activity LPLU should not be used or it will attain link
* from the lowest speeds starting from 10Mbps. The capability is used for
* Dx transitions and states */
- if(hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) {
+ if (hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) {
ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data);
- if(ret_val)
+ if (ret_val)
return ret_val;
+ } else if (hw->mac_type == e1000_ich8lan) {
+ /* MAC writes into PHY register based on the state transition
+ * and start auto-negotiation. SW driver can overwrite the settings
+ * in CSR PHY power control E1000_PHY_CTRL register. */
+ phy_ctrl = E1000_READ_REG(hw, PHY_CTRL);
} else {
ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
if(ret_val)
if(ret_val)
return ret_val;
} else {
+ if (hw->mac_type == e1000_ich8lan) {
+ phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
+ E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl);
+ } else {
phy_data &= ~IGP02E1000_PM_D3_LPLU;
ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
phy_data);
if (ret_val)
return ret_val;
+ }
}
/* LPLU and SmartSpeed are mutually exclusive. LPLU is used during
(hw->autoneg_advertised == AUTONEG_ADVERTISE_10_100_ALL)) {
if(hw->mac_type == e1000_82541_rev_2 ||
- hw->mac_type == e1000_82547_rev_2) {
+ hw->mac_type == e1000_82547_rev_2) {
phy_data |= IGP01E1000_GMII_FLEX_SPD;
ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data);
if(ret_val)
return ret_val;
} else {
+ if (hw->mac_type == e1000_ich8lan) {
+ phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
+ E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl);
+ } else {
phy_data |= IGP02E1000_PM_D3_LPLU;
ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
phy_data);
if (ret_val)
return ret_val;
+ }
}
/* When LPLU is enabled we should disable SmartSpeed */
e1000_set_d0_lplu_state(struct e1000_hw *hw,
boolean_t active)
{
+ uint32_t phy_ctrl = 0;
int32_t ret_val;
uint16_t phy_data;
DEBUGFUNC("e1000_set_d0_lplu_state");
if(hw->mac_type <= e1000_82547_rev_2)
return E1000_SUCCESS;
+ if (hw->mac_type == e1000_ich8lan) {
+ phy_ctrl = E1000_READ_REG(hw, PHY_CTRL);
+ } else {
ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
if(ret_val)
return ret_val;
+ }
if (!active) {
+ if (hw->mac_type == e1000_ich8lan) {
+ phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
+ E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl);
+ } else {
phy_data &= ~IGP02E1000_PM_D0_LPLU;
ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
if (ret_val)
return ret_val;
+ }
/* LPLU and SmartSpeed are mutually exclusive. LPLU is used during
* Dx states where the power conservation is most important. During
} else {
+ if (hw->mac_type == e1000_ich8lan) {
+ phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
+ E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl);
+ } else {
phy_data |= IGP02E1000_PM_D0_LPLU;
ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
if (ret_val)
return ret_val;
+ }
/* When LPLU is enabled we should disable SmartSpeed */
ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data);
length >>= 2;
/* The device driver writes the relevant command block into the ram area. */
- for (i = 0; i < length; i++)
+ for (i = 0; i < length; i++) {
E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((uint32_t *) hdr + i));
+ E1000_WRITE_FLUSH(hw);
+ }
return E1000_SUCCESS;
}
* returns - TRUE when the mode is IAMT or FALSE.
****************************************************************************/
boolean_t
-e1000_check_mng_mode(
- struct e1000_hw *hw)
+e1000_check_mng_mode(struct e1000_hw *hw)
{
uint32_t fwsm;
fwsm = E1000_READ_REG(hw, FWSM);
- if((fwsm & E1000_FWSM_MODE_MASK) ==
- (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
+ if (hw->mac_type == e1000_ich8lan) {
+ if ((fwsm & E1000_FWSM_MODE_MASK) ==
+ (E1000_MNG_ICH_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
+ return TRUE;
+ } else if ((fwsm & E1000_FWSM_MODE_MASK) ==
+ (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
return TRUE;
return FALSE;
E1000_WRITE_REG(hw, CTRL, ctrl);
}
-#if 0
/***************************************************************************
*
* Enables PCI-Express master access.
ctrl &= ~E1000_CTRL_GIO_MASTER_DISABLE;
E1000_WRITE_REG(hw, CTRL, ctrl);
}
-#endif /* 0 */
/*******************************************************************************
*
case e1000_82572:
case e1000_82573:
case e1000_80003es2lan:
- while(timeout) {
- if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD) break;
+ case e1000_ich8lan:
+ while (timeout) {
+ if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD)
+ break;
else msec_delay(1);
timeout--;
}
switch (hw->mac_type) {
default:
- msec_delay(10);
+ msec_delay_irq(10);
break;
case e1000_80003es2lan:
/* Separate *_CFG_DONE_* bit for each port */
e1000_check_phy_reset_block(struct e1000_hw *hw)
{
uint32_t manc = 0;
+ uint32_t fwsm = 0;
+
+ if (hw->mac_type == e1000_ich8lan) {
+ fwsm = E1000_READ_REG(hw, FWSM);
+ return (fwsm & E1000_FWSM_RSPCIPHY) ? E1000_SUCCESS
+ : E1000_BLK_PHY_RESET;
+ }
if (hw->mac_type > e1000_82547_rev_2)
manc = E1000_READ_REG(hw, MANC);
if((fwsm & E1000_FWSM_MODE_MASK) != 0)
return TRUE;
break;
+ case e1000_ich8lan:
+ return TRUE;
default:
break;
}
}
+/******************************************************************************
+ * Configure PCI-Ex no-snoop
+ *
+ * hw - Struct containing variables accessed by shared code.
+ * no_snoop - Bitmap of no-snoop events.
+ *
+ * returns: E1000_SUCCESS
+ *
+ *****************************************************************************/
+int32_t
+e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop)
+{
+ uint32_t gcr_reg = 0;
+
+ DEBUGFUNC("e1000_set_pci_ex_no_snoop");
+
+ if (hw->bus_type == e1000_bus_type_unknown)
+ e1000_get_bus_info(hw);
+
+ if (hw->bus_type != e1000_bus_type_pci_express)
+ return E1000_SUCCESS;
+
+ if (no_snoop) {
+ gcr_reg = E1000_READ_REG(hw, GCR);
+ gcr_reg &= ~(PCI_EX_NO_SNOOP_ALL);
+ gcr_reg |= no_snoop;
+ E1000_WRITE_REG(hw, GCR, gcr_reg);
+ }
+ if (hw->mac_type == e1000_ich8lan) {
+ uint32_t ctrl_ext;
+
+ E1000_WRITE_REG(hw, GCR, PCI_EX_82566_SNOOP_ALL);
+
+ ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
+ E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
+ }
+
+ return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ *
+ * Get software semaphore FLAG bit (SWFLAG).
+ * SWFLAG is used to synchronize the access to all shared resource between
+ * SW, FW and HW.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+int32_t
+e1000_get_software_flag(struct e1000_hw *hw)
+{
+ int32_t timeout = PHY_CFG_TIMEOUT;
+ uint32_t extcnf_ctrl;
+
+ DEBUGFUNC("e1000_get_software_flag");
+
+ if (hw->mac_type == e1000_ich8lan) {
+ while (timeout) {
+ extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL);
+ extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
+ E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl);
+
+ extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL);
+ if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
+ break;
+ msec_delay_irq(1);
+ timeout--;
+ }
+
+ if (!timeout) {
+ DEBUGOUT("FW or HW locks the resource too long.\n");
+ return -E1000_ERR_CONFIG;
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ *
+ * Release software semaphore FLAG bit (SWFLAG).
+ * SWFLAG is used to synchronize the access to all shared resource between
+ * SW, FW and HW.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+void
+e1000_release_software_flag(struct e1000_hw *hw)
+{
+ uint32_t extcnf_ctrl;
+
+ DEBUGFUNC("e1000_release_software_flag");
+
+ if (hw->mac_type == e1000_ich8lan) {
+ extcnf_ctrl= E1000_READ_REG(hw, EXTCNF_CTRL);
+ extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
+ E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl);
+ }
+
+ return;
+}
+
+/***************************************************************************
+ *
+ * Disable dynamic power down mode in ife PHY.
+ * It can be used to workaround band-gap problem.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+int32_t
+e1000_ife_disable_dynamic_power_down(struct e1000_hw *hw)
+{
+ uint16_t phy_data;
+ int32_t ret_val = E1000_SUCCESS;
+
+ DEBUGFUNC("e1000_ife_disable_dynamic_power_down");
+
+ if (hw->phy_type == e1000_phy_ife) {
+ ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN;
+ ret_val = e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, phy_data);
+ }
+
+ return ret_val;
+}
+
+/***************************************************************************
+ *
+ * Enable dynamic power down mode in ife PHY.
+ * It can be used to workaround band-gap problem.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+int32_t
+e1000_ife_enable_dynamic_power_down(struct e1000_hw *hw)
+{
+ uint16_t phy_data;
+ int32_t ret_val = E1000_SUCCESS;
+
+ DEBUGFUNC("e1000_ife_enable_dynamic_power_down");
+
+ if (hw->phy_type == e1000_phy_ife) {
+ ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN;
+ ret_val = e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, phy_data);
+ }
+
+ return ret_val;
+}
+
+/******************************************************************************
+ * Reads a 16 bit word or words from the EEPROM using the ICH8's flash access
+ * register.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to read
+ * data - word read from the EEPROM
+ * words - number of words to read
+ *****************************************************************************/
+int32_t
+e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
+ uint16_t *data)
+{
+ int32_t error = E1000_SUCCESS;
+ uint32_t flash_bank = 0;
+ uint32_t act_offset = 0;
+ uint32_t bank_offset = 0;
+ uint16_t word = 0;
+ uint16_t i = 0;
+
+ /* We need to know which is the valid flash bank. In the event
+ * that we didn't allocate eeprom_shadow_ram, we may not be
+ * managing flash_bank. So it cannot be trusted and needs
+ * to be updated with each read.
+ */
+ /* Value of bit 22 corresponds to the flash bank we're on. */
+ flash_bank = (E1000_READ_REG(hw, EECD) & E1000_EECD_SEC1VAL) ? 1 : 0;
+
+ /* Adjust offset appropriately if we're on bank 1 - adjust for word size */
+ bank_offset = flash_bank * (hw->flash_bank_size * 2);
+
+ error = e1000_get_software_flag(hw);
+ if (error != E1000_SUCCESS)
+ return error;
+
+ for (i = 0; i < words; i++) {
+ if (hw->eeprom_shadow_ram != NULL &&
+ hw->eeprom_shadow_ram[offset+i].modified == TRUE) {
+ data[i] = hw->eeprom_shadow_ram[offset+i].eeprom_word;
+ } else {
+ /* The NVM part needs a byte offset, hence * 2 */
+ act_offset = bank_offset + ((offset + i) * 2);
+ error = e1000_read_ich8_word(hw, act_offset, &word);
+ if (error != E1000_SUCCESS)
+ break;
+ data[i] = word;
+ }
+ }
+
+ e1000_release_software_flag(hw);
+
+ return error;
+}
+
+/******************************************************************************
+ * Writes a 16 bit word or words to the EEPROM using the ICH8's flash access
+ * register. Actually, writes are written to the shadow ram cache in the hw
+ * structure hw->e1000_shadow_ram. e1000_commit_shadow_ram flushes this to
+ * the NVM, which occurs when the NVM checksum is updated.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to write
+ * words - number of words to write
+ * data - words to write to the EEPROM
+ *****************************************************************************/
+int32_t
+e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
+ uint16_t *data)
+{
+ uint32_t i = 0;
+ int32_t error = E1000_SUCCESS;
+
+ error = e1000_get_software_flag(hw);
+ if (error != E1000_SUCCESS)
+ return error;
+
+ /* A driver can write to the NVM only if it has eeprom_shadow_ram
+ * allocated. Subsequent reads to the modified words are read from
+ * this cached structure as well. Writes will only go into this
+ * cached structure unless it's followed by a call to
+ * e1000_update_eeprom_checksum() where it will commit the changes
+ * and clear the "modified" field.
+ */
+ if (hw->eeprom_shadow_ram != NULL) {
+ for (i = 0; i < words; i++) {
+ if ((offset + i) < E1000_SHADOW_RAM_WORDS) {
+ hw->eeprom_shadow_ram[offset+i].modified = TRUE;
+ hw->eeprom_shadow_ram[offset+i].eeprom_word = data[i];
+ } else {
+ error = -E1000_ERR_EEPROM;
+ break;
+ }
+ }
+ } else {
+ /* Drivers have the option to not allocate eeprom_shadow_ram as long
+ * as they don't perform any NVM writes. An attempt in doing so
+ * will result in this error.
+ */
+ error = -E1000_ERR_EEPROM;
+ }
+
+ e1000_release_software_flag(hw);
+
+ return error;
+}
+
+/******************************************************************************
+ * This function does initial flash setup so that a new read/write/erase cycle
+ * can be started.
+ *
+ * hw - The pointer to the hw structure
+ ****************************************************************************/
+int32_t
+e1000_ich8_cycle_init(struct e1000_hw *hw)
+{
+ union ich8_hws_flash_status hsfsts;
+ int32_t error = E1000_ERR_EEPROM;
+ int32_t i = 0;
+
+ DEBUGFUNC("e1000_ich8_cycle_init");
+
+ hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+
+ /* May be check the Flash Des Valid bit in Hw status */
+ if (hsfsts.hsf_status.fldesvalid == 0) {
+ DEBUGOUT("Flash descriptor invalid. SW Sequencing must be used.");
+ return error;
+ }
+
+ /* Clear FCERR in Hw status by writing 1 */
+ /* Clear DAEL in Hw status by writing a 1 */
+ hsfsts.hsf_status.flcerr = 1;
+ hsfsts.hsf_status.dael = 1;
+
+ E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval);
+
+ /* Either we should have a hardware SPI cycle in progress bit to check
+ * against, in order to start a new cycle or FDONE bit should be changed
+ * in the hardware so that it is 1 after harware reset, which can then be
+ * used as an indication whether a cycle is in progress or has been
+ * completed .. we should also have some software semaphore mechanism to
+ * guard FDONE or the cycle in progress bit so that two threads access to
+ * those bits can be sequentiallized or a way so that 2 threads dont
+ * start the cycle at the same time */
+
+ if (hsfsts.hsf_status.flcinprog == 0) {
+ /* There is no cycle running at present, so we can start a cycle */
+ /* Begin by setting Flash Cycle Done. */
+ hsfsts.hsf_status.flcdone = 1;
+ E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval);
+ error = E1000_SUCCESS;
+ } else {
+ /* otherwise poll for sometime so the current cycle has a chance
+ * to end before giving up. */
+ for (i = 0; i < ICH8_FLASH_COMMAND_TIMEOUT; i++) {
+ hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.flcinprog == 0) {
+ error = E1000_SUCCESS;
+ break;
+ }
+ udelay(1);
+ }
+ if (error == E1000_SUCCESS) {
+ /* Successful in waiting for previous cycle to timeout,
+ * now set the Flash Cycle Done. */
+ hsfsts.hsf_status.flcdone = 1;
+ E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval);
+ } else {
+ DEBUGOUT("Flash controller busy, cannot get access");
+ }
+ }
+ return error;
+}
+
+/******************************************************************************
+ * This function starts a flash cycle and waits for its completion
+ *
+ * hw - The pointer to the hw structure
+ ****************************************************************************/
+int32_t
+e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout)
+{
+ union ich8_hws_flash_ctrl hsflctl;
+ union ich8_hws_flash_status hsfsts;
+ int32_t error = E1000_ERR_EEPROM;
+ uint32_t i = 0;
+
+ /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */
+ hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL);
+ hsflctl.hsf_ctrl.flcgo = 1;
+ E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval);
+
+ /* wait till FDONE bit is set to 1 */
+ do {
+ hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.flcdone == 1)
+ break;
+ udelay(1);
+ i++;
+ } while (i < timeout);
+ if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0) {
+ error = E1000_SUCCESS;
+ }
+ return error;
+}
+
+/******************************************************************************
+ * Reads a byte or word from the NVM using the ICH8 flash access registers.
+ *
+ * hw - The pointer to the hw structure
+ * index - The index of the byte or word to read.
+ * size - Size of data to read, 1=byte 2=word
+ * data - Pointer to the word to store the value read.
+ *****************************************************************************/
+int32_t
+e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
+ uint32_t size, uint16_t* data)
+{
+ union ich8_hws_flash_status hsfsts;
+ union ich8_hws_flash_ctrl hsflctl;
+ uint32_t flash_linear_address;
+ uint32_t flash_data = 0;
+ int32_t error = -E1000_ERR_EEPROM;
+ int32_t count = 0;
+
+ DEBUGFUNC("e1000_read_ich8_data");
+
+ if (size < 1 || size > 2 || data == 0x0 ||
+ index > ICH8_FLASH_LINEAR_ADDR_MASK)
+ return error;
+
+ flash_linear_address = (ICH8_FLASH_LINEAR_ADDR_MASK & index) +
+ hw->flash_base_addr;
+
+ do {
+ udelay(1);
+ /* Steps */
+ error = e1000_ich8_cycle_init(hw);
+ if (error != E1000_SUCCESS)
+ break;
+
+ hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL);
+ /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
+ hsflctl.hsf_ctrl.fldbcount = size - 1;
+ hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_READ;
+ E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval);
+
+ /* Write the last 24 bits of index into Flash Linear address field in
+ * Flash Address */
+ /* TODO: TBD maybe check the index against the size of flash */
+
+ E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address);
+
+ error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_COMMAND_TIMEOUT);
+
+ /* Check if FCERR is set to 1, if set to 1, clear it and try the whole
+ * sequence a few more times, else read in (shift in) the Flash Data0,
+ * the order is least significant byte first msb to lsb */
+ if (error == E1000_SUCCESS) {
+ flash_data = E1000_READ_ICH8_REG(hw, ICH8_FLASH_FDATA0);
+ if (size == 1) {
+ *data = (uint8_t)(flash_data & 0x000000FF);
+ } else if (size == 2) {
+ *data = (uint16_t)(flash_data & 0x0000FFFF);
+ }
+ break;
+ } else {
+ /* If we've gotten here, then things are probably completely hosed,
+ * but if the error condition is detected, it won't hurt to give
+ * it another try...ICH8_FLASH_CYCLE_REPEAT_COUNT times.
+ */
+ hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.flcerr == 1) {
+ /* Repeat for some time before giving up. */
+ continue;
+ } else if (hsfsts.hsf_status.flcdone == 0) {
+ DEBUGOUT("Timeout error - flash cycle did not complete.");
+ break;
+ }
+ }
+ } while (count++ < ICH8_FLASH_CYCLE_REPEAT_COUNT);
+
+ return error;
+}
+
+/******************************************************************************
+ * Writes One /two bytes to the NVM using the ICH8 flash access registers.
+ *
+ * hw - The pointer to the hw structure
+ * index - The index of the byte/word to read.
+ * size - Size of data to read, 1=byte 2=word
+ * data - The byte(s) to write to the NVM.
+ *****************************************************************************/
+int32_t
+e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size,
+ uint16_t data)
+{
+ union ich8_hws_flash_status hsfsts;
+ union ich8_hws_flash_ctrl hsflctl;
+ uint32_t flash_linear_address;
+ uint32_t flash_data = 0;
+ int32_t error = -E1000_ERR_EEPROM;
+ int32_t count = 0;
+
+ DEBUGFUNC("e1000_write_ich8_data");
+
+ if (size < 1 || size > 2 || data > size * 0xff ||
+ index > ICH8_FLASH_LINEAR_ADDR_MASK)
+ return error;
+
+ flash_linear_address = (ICH8_FLASH_LINEAR_ADDR_MASK & index) +
+ hw->flash_base_addr;
+
+ do {
+ udelay(1);
+ /* Steps */
+ error = e1000_ich8_cycle_init(hw);
+ if (error != E1000_SUCCESS)
+ break;
+
+ hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL);
+ /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
+ hsflctl.hsf_ctrl.fldbcount = size -1;
+ hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_WRITE;
+ E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval);
+
+ /* Write the last 24 bits of index into Flash Linear address field in
+ * Flash Address */
+ E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address);
+
+ if (size == 1)
+ flash_data = (uint32_t)data & 0x00FF;
+ else
+ flash_data = (uint32_t)data;
+
+ E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FDATA0, flash_data);
+
+ /* check if FCERR is set to 1 , if set to 1, clear it and try the whole
+ * sequence a few more times else done */
+ error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_COMMAND_TIMEOUT);
+ if (error == E1000_SUCCESS) {
+ break;
+ } else {
+ /* If we're here, then things are most likely completely hosed,
+ * but if the error condition is detected, it won't hurt to give
+ * it another try...ICH8_FLASH_CYCLE_REPEAT_COUNT times.
+ */
+ hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.flcerr == 1) {
+ /* Repeat for some time before giving up. */
+ continue;
+ } else if (hsfsts.hsf_status.flcdone == 0) {
+ DEBUGOUT("Timeout error - flash cycle did not complete.");
+ break;
+ }
+ }
+ } while (count++ < ICH8_FLASH_CYCLE_REPEAT_COUNT);
+
+ return error;
+}
+
+/******************************************************************************
+ * Reads a single byte from the NVM using the ICH8 flash access registers.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The index of the byte to read.
+ * data - Pointer to a byte to store the value read.
+ *****************************************************************************/
+int32_t
+e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t* data)
+{
+ int32_t status = E1000_SUCCESS;
+ uint16_t word = 0;
+
+ status = e1000_read_ich8_data(hw, index, 1, &word);
+ if (status == E1000_SUCCESS) {
+ *data = (uint8_t)word;
+ }
+
+ return status;
+}
+
+/******************************************************************************
+ * Writes a single byte to the NVM using the ICH8 flash access registers.
+ * Performs verification by reading back the value and then going through
+ * a retry algorithm before giving up.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The index of the byte to write.
+ * byte - The byte to write to the NVM.
+ *****************************************************************************/
+int32_t
+e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte)
+{
+ int32_t error = E1000_SUCCESS;
+ int32_t program_retries;
+ uint8_t temp_byte;
+
+ e1000_write_ich8_byte(hw, index, byte);
+ udelay(100);
+
+ for (program_retries = 0; program_retries < 100; program_retries++) {
+ e1000_read_ich8_byte(hw, index, &temp_byte);
+ if (temp_byte == byte)
+ break;
+ udelay(10);
+ e1000_write_ich8_byte(hw, index, byte);
+ udelay(100);
+ }
+ if (program_retries == 100)
+ error = E1000_ERR_EEPROM;
+
+ return error;
+}
+
+/******************************************************************************
+ * Writes a single byte to the NVM using the ICH8 flash access registers.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The index of the byte to read.
+ * data - The byte to write to the NVM.
+ *****************************************************************************/
+int32_t
+e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t data)
+{
+ int32_t status = E1000_SUCCESS;
+ uint16_t word = (uint16_t)data;
+
+ status = e1000_write_ich8_data(hw, index, 1, word);
+
+ return status;
+}
+
+/******************************************************************************
+ * Reads a word from the NVM using the ICH8 flash access registers.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The starting byte index of the word to read.
+ * data - Pointer to a word to store the value read.
+ *****************************************************************************/
+int32_t
+e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data)
+{
+ int32_t status = E1000_SUCCESS;
+ status = e1000_read_ich8_data(hw, index, 2, data);
+ return status;
+}
+
+/******************************************************************************
+ * Writes a word to the NVM using the ICH8 flash access registers.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The starting byte index of the word to read.
+ * data - The word to write to the NVM.
+ *****************************************************************************/
+int32_t
+e1000_write_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t data)
+{
+ int32_t status = E1000_SUCCESS;
+ status = e1000_write_ich8_data(hw, index, 2, data);
+ return status;
+}
+
+/******************************************************************************
+ * Erases the bank specified. Each bank is a 4k block. Segments are 0 based.
+ * segment N is 4096 * N + flash_reg_addr.
+ *
+ * hw - pointer to e1000_hw structure
+ * segment - 0 for first segment, 1 for second segment, etc.
+ *****************************************************************************/
+int32_t
+e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment)
+{
+ union ich8_hws_flash_status hsfsts;
+ union ich8_hws_flash_ctrl hsflctl;
+ uint32_t flash_linear_address;
+ int32_t count = 0;
+ int32_t error = E1000_ERR_EEPROM;
+ int32_t iteration, seg_size;
+ int32_t sector_size;
+ int32_t j = 0;
+ int32_t error_flag = 0;
+
+ hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+
+ /* Determine HW Sector size: Read BERASE bits of Hw flash Status register */
+ /* 00: The Hw sector is 256 bytes, hence we need to erase 16
+ * consecutive sectors. The start index for the nth Hw sector can be
+ * calculated as = segment * 4096 + n * 256
+ * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector.
+ * The start index for the nth Hw sector can be calculated
+ * as = segment * 4096
+ * 10: Error condition
+ * 11: The Hw sector size is much bigger than the size asked to
+ * erase...error condition */
+ if (hsfsts.hsf_status.berasesz == 0x0) {
+ /* Hw sector size 256 */
+ sector_size = seg_size = ICH8_FLASH_SEG_SIZE_256;
+ iteration = ICH8_FLASH_SECTOR_SIZE / ICH8_FLASH_SEG_SIZE_256;
+ } else if (hsfsts.hsf_status.berasesz == 0x1) {
+ sector_size = seg_size = ICH8_FLASH_SEG_SIZE_4K;
+ iteration = 1;
+ } else if (hsfsts.hsf_status.berasesz == 0x3) {
+ sector_size = seg_size = ICH8_FLASH_SEG_SIZE_64K;
+ iteration = 1;
+ } else {
+ return error;
+ }
+
+ for (j = 0; j < iteration ; j++) {
+ do {
+ count++;
+ /* Steps */
+ error = e1000_ich8_cycle_init(hw);
+ if (error != E1000_SUCCESS) {
+ error_flag = 1;
+ break;
+ }
+
+ /* Write a value 11 (block Erase) in Flash Cycle field in Hw flash
+ * Control */
+ hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL);
+ hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_ERASE;
+ E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval);
+
+ /* Write the last 24 bits of an index within the block into Flash
+ * Linear address field in Flash Address. This probably needs to
+ * be calculated here based off the on-chip segment size and the
+ * software segment size assumed (4K) */
+ /* TBD */
+ flash_linear_address = segment * sector_size + j * seg_size;
+ flash_linear_address &= ICH8_FLASH_LINEAR_ADDR_MASK;
+ flash_linear_address += hw->flash_base_addr;
+
+ E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address);
+
+ error = e1000_ich8_flash_cycle(hw, 1000000);
+ /* Check if FCERR is set to 1. If 1, clear it and try the whole
+ * sequence a few more times else Done */
+ if (error == E1000_SUCCESS) {
+ break;
+ } else {
+ hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.flcerr == 1) {
+ /* repeat for some time before giving up */
+ continue;
+ } else if (hsfsts.hsf_status.flcdone == 0) {
+ error_flag = 1;
+ break;
+ }
+ }
+ } while ((count < ICH8_FLASH_CYCLE_REPEAT_COUNT) && !error_flag);
+ if (error_flag == 1)
+ break;
+ }
+ if (error_flag != 1)
+ error = E1000_SUCCESS;
+ return error;
+}
+
+/******************************************************************************
+ *
+ * Reverse duplex setting without breaking the link.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ *****************************************************************************/
+int32_t
+e1000_duplex_reversal(struct e1000_hw *hw)
+{
+ int32_t ret_val;
+ uint16_t phy_data;
+
+ if (hw->phy_type != e1000_phy_igp_3)
+ return E1000_SUCCESS;
+
+ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data ^= MII_CR_FULL_DUPLEX;
+
+ ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, IGP3E1000_PHY_MISC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= IGP3_PHY_MISC_DUPLEX_MANUAL_SET;
+ ret_val = e1000_write_phy_reg(hw, IGP3E1000_PHY_MISC_CTRL, phy_data);
+
+ return ret_val;
+}
+
+int32_t
+e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
+ uint32_t cnf_base_addr, uint32_t cnf_size)
+{
+ uint32_t ret_val = E1000_SUCCESS;
+ uint16_t word_addr, reg_data, reg_addr;
+ uint16_t i;
+
+ /* cnf_base_addr is in DWORD */
+ word_addr = (uint16_t)(cnf_base_addr << 1);
+
+ /* cnf_size is returned in size of dwords */
+ for (i = 0; i < cnf_size; i++) {
+ ret_val = e1000_read_eeprom(hw, (word_addr + i*2), 1, ®_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_eeprom(hw, (word_addr + i*2 + 1), 1, ®_addr);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_get_software_flag(hw);
+ if (ret_val != E1000_SUCCESS)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg_ex(hw, (uint32_t)reg_addr, reg_data);
+
+ e1000_release_software_flag(hw);
+ }
+
+ return ret_val;
+}
+
+
+int32_t
+e1000_init_lcd_from_nvm(struct e1000_hw *hw)
+{
+ uint32_t reg_data, cnf_base_addr, cnf_size, ret_val, loop;
+
+ if (hw->phy_type != e1000_phy_igp_3)
+ return E1000_SUCCESS;
+
+ /* Check if SW needs configure the PHY */
+ reg_data = E1000_READ_REG(hw, FEXTNVM);
+ if (!(reg_data & FEXTNVM_SW_CONFIG))
+ return E1000_SUCCESS;
+
+ /* Wait for basic configuration completes before proceeding*/
+ loop = 0;
+ do {
+ reg_data = E1000_READ_REG(hw, STATUS) & E1000_STATUS_LAN_INIT_DONE;
+ udelay(100);
+ loop++;
+ } while ((!reg_data) && (loop < 50));
+
+ /* Clear the Init Done bit for the next init event */
+ reg_data = E1000_READ_REG(hw, STATUS);
+ reg_data &= ~E1000_STATUS_LAN_INIT_DONE;
+ E1000_WRITE_REG(hw, STATUS, reg_data);
+
+ /* Make sure HW does not configure LCD from PHY extended configuration
+ before SW configuration */
+ reg_data = E1000_READ_REG(hw, EXTCNF_CTRL);
+ if ((reg_data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) == 0x0000) {
+ reg_data = E1000_READ_REG(hw, EXTCNF_SIZE);
+ cnf_size = reg_data & E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH;
+ cnf_size >>= 16;
+ if (cnf_size) {
+ reg_data = E1000_READ_REG(hw, EXTCNF_CTRL);
+ cnf_base_addr = reg_data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER;
+ /* cnf_base_addr is in DWORD */
+ cnf_base_addr >>= 16;
+
+ /* Configure LCD from extended configuration region. */
+ ret_val = e1000_init_lcd_from_nvm_config_region(hw, cnf_base_addr,
+ cnf_size);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+
e1000_82572,
e1000_82573,
e1000_80003es2lan,
+ e1000_ich8lan,
e1000_num_macs
} e1000_mac_type;
e1000_eeprom_spi,
e1000_eeprom_microwire,
e1000_eeprom_flash,
+ e1000_eeprom_ich8,
e1000_eeprom_none, /* No NVM support */
e1000_num_eeprom_types
} e1000_eeprom_type;
e1000_fc_default = 0xFF
} e1000_fc_type;
+struct e1000_shadow_ram {
+ uint16_t eeprom_word;
+ boolean_t modified;
+};
+
/* PCI bus types */
typedef enum {
e1000_bus_type_unknown = 0,
e1000_phy_igp,
e1000_phy_igp_2,
e1000_phy_gg82563,
+ e1000_phy_igp_3,
+ e1000_phy_ife,
e1000_phy_undefined = 0xFF
} e1000_phy_type;
int32_t e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data);
int32_t e1000_phy_hw_reset(struct e1000_hw *hw);
int32_t e1000_phy_reset(struct e1000_hw *hw);
+void e1000_phy_powerdown_workaround(struct e1000_hw *hw);
+int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw);
+int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32_t cnf_base_addr, uint32_t cnf_size);
+int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw);
int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
int32_t e1000_validate_mdi_setting(struct e1000_hw *hw);
int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *data);
#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */
#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */
#define E1000_MNG_IAMT_MODE 0x3
+#define E1000_MNG_ICH_IAMT_MODE 0x2
#define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */
#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */
int32_t e1000_read_mac_addr(struct e1000_hw * hw);
int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask);
void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask);
+void e1000_release_software_flag(struct e1000_hw *hw);
+int32_t e1000_get_software_flag(struct e1000_hw *hw);
/* Filters (multicast, vlan, receive) */
void e1000_mc_addr_list_update(struct e1000_hw *hw, uint8_t * mc_addr_list, uint32_t mc_addr_count, uint32_t pad, uint32_t rar_used_count);
int32_t e1000_cleanup_led(struct e1000_hw *hw);
int32_t e1000_led_on(struct e1000_hw *hw);
int32_t e1000_led_off(struct e1000_hw *hw);
+int32_t e1000_blink_led_start(struct e1000_hw *hw);
/* Adaptive IFS Functions */
int32_t e1000_get_software_semaphore(struct e1000_hw *hw);
void e1000_release_software_semaphore(struct e1000_hw *hw);
int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
+int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop);
+
+int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index,
+ uint8_t *data);
+int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index,
+ uint8_t byte);
+int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index,
+ uint8_t byte);
+int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index,
+ uint16_t *data);
+int32_t e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
+ uint32_t size, uint16_t *data);
+int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset,
+ uint16_t words, uint16_t *data);
+int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset,
+ uint16_t words, uint16_t *data);
+int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment);
+
+
+#define E1000_READ_REG_IO(a, reg) \
+ e1000_read_reg_io((a), E1000_##reg)
+#define E1000_WRITE_REG_IO(a, reg, val) \
+ e1000_write_reg_io((a), E1000_##reg, val)
/* PCI Device IDs */
#define E1000_DEV_ID_82542 0x1000
#define E1000_DEV_ID_82546EB_QUAD_COPPER 0x101D
#define E1000_DEV_ID_82541EI 0x1013
#define E1000_DEV_ID_82541EI_MOBILE 0x1018
+#define E1000_DEV_ID_82541ER_LOM 0x1014
#define E1000_DEV_ID_82541ER 0x1078
#define E1000_DEV_ID_82547GI 0x1075
#define E1000_DEV_ID_82541GI 0x1076
#define E1000_DEV_ID_82546GB_PCIE 0x108A
#define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099
#define E1000_DEV_ID_82547EI 0x1019
+#define E1000_DEV_ID_82547EI_MOBILE 0x101A
#define E1000_DEV_ID_82571EB_COPPER 0x105E
#define E1000_DEV_ID_82571EB_FIBER 0x105F
#define E1000_DEV_ID_82571EB_SERDES 0x1060
#define E1000_DEV_ID_82572EI_COPPER 0x107D
#define E1000_DEV_ID_82572EI_FIBER 0x107E
#define E1000_DEV_ID_82572EI_SERDES 0x107F
+#define E1000_DEV_ID_82572EI 0x10B9
#define E1000_DEV_ID_82573E 0x108B
#define E1000_DEV_ID_82573E_IAMT 0x108C
#define E1000_DEV_ID_82573L 0x109A
#define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5
#define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096
#define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098
+#define E1000_DEV_ID_80003ES2LAN_COPPER_SPT 0x10BA
+#define E1000_DEV_ID_80003ES2LAN_SERDES_SPT 0x10BB
+
+#define E1000_DEV_ID_ICH8_IGP_M_AMT 0x1049
+#define E1000_DEV_ID_ICH8_IGP_AMT 0x104A
+#define E1000_DEV_ID_ICH8_IGP_C 0x104B
+#define E1000_DEV_ID_ICH8_IFE 0x104C
+#define E1000_DEV_ID_ICH8_IGP_M 0x104D
#define NODE_ADDRESS_SIZE 6
E1000_IMS_RXSEQ | \
E1000_IMS_LSC)
+/* Additional interrupts need to be handled for e1000_ich8lan:
+ DSW = The FW changed the status of the DISSW bit in FWSM
+ PHYINT = The LAN connected device generates an interrupt
+ EPRST = Manageability reset event */
+#define IMS_ICH8LAN_ENABLE_MASK (\
+ E1000_IMS_DSW | \
+ E1000_IMS_PHYINT | \
+ E1000_IMS_EPRST)
/* Number of high/low register pairs in the RAR. The RAR (Receive Address
* Registers) holds the directed and multicast addresses that we monitor. We
* E1000_RAR_ENTRIES - 1 multicast addresses.
*/
#define E1000_RAR_ENTRIES 15
+#define E1000_RAR_ENTRIES_ICH8LAN 7
#define MIN_NUMBER_OF_DESCRIPTORS 8
#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8
#define E1000_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */
#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
+#define E1000_NUM_UNICAST_ICH8LAN 7
+#define E1000_MC_TBL_SIZE_ICH8LAN 32
+
/* Receive Address Register */
struct e1000_rar {
/* Number of entries in the Multicast Table Array (MTA). */
#define E1000_NUM_MTA_REGISTERS 128
+#define E1000_NUM_MTA_REGISTERS_ICH8LAN 32
/* IPv4 Address Table Entry */
struct e1000_ipv4_at_entry {
/* Four wakeup IP addresses are supported */
#define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4
#define E1000_IP4AT_SIZE E1000_WAKEUP_IP_ADDRESS_COUNT_MAX
+#define E1000_IP4AT_SIZE_ICH8LAN 3
#define E1000_IP6AT_SIZE 1
/* IPv6 Address Table Entry */
#define E1000_FLA 0x0001C /* Flash Access - RW */
#define E1000_MDIC 0x00020 /* MDI Control - RW */
#define E1000_SCTL 0x00024 /* SerDes Control - RW */
+#define E1000_FEXTNVM 0x00028 /* Future Extended NVM register */
#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
#define E1000_FCT 0x00030 /* Flow Control Type - RW */
#define E1000_LEDCTL 0x00E00 /* LED Control - RW */
#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */
#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */
+#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */
+#define FEXTNVM_SW_CONFIG 0x0001
#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
#define E1000_PBS 0x01008 /* Packet Buffer Size */
#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
#define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */
#define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */
#define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */
-#define E1000_RXDCTL 0x02828 /* RX Descriptor Control - RW */
+#define E1000_RXDCTL 0x02828 /* RX Descriptor Control queue 0 - RW */
+#define E1000_RXDCTL1 0x02928 /* RX Descriptor Control queue 1 - RW */
#define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */
#define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */
#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */
#define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */
+#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */
#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */
#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */
#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */
#define E1000_82542_FLA E1000_FLA
#define E1000_82542_MDIC E1000_MDIC
#define E1000_82542_SCTL E1000_SCTL
+#define E1000_82542_FEXTNVM E1000_FEXTNVM
#define E1000_82542_FCAL E1000_FCAL
#define E1000_82542_FCAH E1000_FCAH
#define E1000_82542_FCT E1000_FCT
#define E1000_82542_RDLEN0 E1000_82542_RDLEN
#define E1000_82542_RDH0 E1000_82542_RDH
#define E1000_82542_RDT0 E1000_82542_RDT
+#define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8)) /* Split and Replication
+ * RX Control - RW */
+#define E1000_82542_DCA_RXCTRL(_n) (0x02814 + ((_n) << 8))
+#define E1000_82542_RDBAH3 0x02B04 /* RX Desc Base High Queue 3 - RW */
+#define E1000_82542_RDBAL3 0x02B00 /* RX Desc Low Queue 3 - RW */
+#define E1000_82542_RDLEN3 0x02B08 /* RX Desc Length Queue 3 - RW */
+#define E1000_82542_RDH3 0x02B10 /* RX Desc Head Queue 3 - RW */
+#define E1000_82542_RDT3 0x02B18 /* RX Desc Tail Queue 3 - RW */
+#define E1000_82542_RDBAL2 0x02A00 /* RX Desc Base Low Queue 2 - RW */
+#define E1000_82542_RDBAH2 0x02A04 /* RX Desc Base High Queue 2 - RW */
+#define E1000_82542_RDLEN2 0x02A08 /* RX Desc Length Queue 2 - RW */
+#define E1000_82542_RDH2 0x02A10 /* RX Desc Head Queue 2 - RW */
+#define E1000_82542_RDT2 0x02A18 /* RX Desc Tail Queue 2 - RW */
#define E1000_82542_RDTR1 0x00130
#define E1000_82542_RDBAL1 0x00138
#define E1000_82542_RDBAH1 0x0013C
#define E1000_82542_FLOP E1000_FLOP
#define E1000_82542_EXTCNF_CTRL E1000_EXTCNF_CTRL
#define E1000_82542_EXTCNF_SIZE E1000_EXTCNF_SIZE
+#define E1000_82542_PHY_CTRL E1000_PHY_CTRL
#define E1000_82542_ERT E1000_ERT
#define E1000_82542_RXDCTL E1000_RXDCTL
+#define E1000_82542_RXDCTL1 E1000_RXDCTL1
#define E1000_82542_RADV E1000_RADV
#define E1000_82542_RSRPD E1000_RSRPD
#define E1000_82542_TXDMAC E1000_TXDMAC
+#define E1000_82542_KABGTXD E1000_KABGTXD
#define E1000_82542_TDFHS E1000_TDFHS
#define E1000_82542_TDFTS E1000_TDFTS
#define E1000_82542_TDFPC E1000_TDFPC
/* Structure containing variables used by the shared code (e1000_hw.c) */
struct e1000_hw {
- uint8_t __iomem *hw_addr;
+ uint8_t *hw_addr;
uint8_t *flash_address;
e1000_mac_type mac_type;
e1000_phy_type phy_type;
uint32_t phy_init_script;
e1000_media_type media_type;
void *back;
+ struct e1000_shadow_ram *eeprom_shadow_ram;
+ uint32_t flash_bank_size;
+ uint32_t flash_base_addr;
e1000_fc_type fc;
e1000_bus_speed bus_speed;
e1000_bus_width bus_width;
uint32_t asf_firmware_present;
uint32_t eeprom_semaphore_present;
uint32_t swfw_sync_present;
+ uint32_t swfwhw_semaphore_present;
unsigned long io_base;
uint32_t phy_id;
uint32_t phy_revision;
boolean_t in_ifs_mode;
boolean_t mng_reg_access_disabled;
boolean_t leave_av_bit_off;
+ boolean_t kmrn_lock_loss_workaround_disabled;
};
#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */
#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
+#define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to manageability engine */
/* Device Status */
#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
+#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion
+ by EEPROM/Flash */
#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */
#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */
#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
#define E1000_STM_OPCODE 0xDB00
#define E1000_HICR_FW_RESET 0xC0
+#define E1000_SHADOW_RAM_WORDS 2048
+#define E1000_ICH8_NVM_SIG_WORD 0x13
+#define E1000_ICH8_NVM_SIG_MASK 0xC0
+
/* EEPROM Read */
#define E1000_EERD_START 0x00000001 /* Start Read */
#define E1000_EERD_DONE 0x00000010 /* Read Done */
#define E1000_CTRL_EXT_WR_WMARK_320 0x01000000
#define E1000_CTRL_EXT_WR_WMARK_384 0x02000000
#define E1000_CTRL_EXT_WR_WMARK_448 0x03000000
-#define E1000_CTRL_EXT_CANC 0x04000000 /* Interrupt delay cancellation */
#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
#define E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS 0x00000800
/* In-Band Control */
+#define E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT 0x00000500
#define E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING 0x00000010
/* Half-Duplex Control */
#define E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT 0x00000004
#define E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT 0x00000000
+#define E1000_KUMCTRLSTA_OFFSET_K0S_CTRL 0x0000001E
+
+#define E1000_KUMCTRLSTA_DIAG_FELPBK 0x2000
+#define E1000_KUMCTRLSTA_DIAG_NELPBK 0x1000
+
+#define E1000_KUMCTRLSTA_K0S_100_EN 0x2000
+#define E1000_KUMCTRLSTA_K0S_GBE_EN 0x1000
+#define E1000_KUMCTRLSTA_K0S_ENTRY_LATENCY_MASK 0x0003
+
+#define E1000_KABGTXD_BGSQLBIAS 0x00050000
+
+#define E1000_PHY_CTRL_SPD_EN 0x00000001
+#define E1000_PHY_CTRL_D0A_LPLU 0x00000002
+#define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004
+#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008
+#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040
+#define E1000_PHY_CTRL_B2B_EN 0x00000080
+
/* LED Control */
#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
#define E1000_LEDCTL_LED0_MODE_SHIFT 0
#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */
#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */
#define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */
+#define E1000_ICR_DSW 0x00000020 /* FW changed the status of DISSW bit in the FWSM */
+#define E1000_ICR_PHYINT 0x00001000 /* LAN connected device generates an interrupt */
+#define E1000_ICR_EPRST 0x00100000 /* ME handware reset occurs */
/* Interrupt Cause Set */
#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
#define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
#define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
#define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_ICS_DSW E1000_ICR_DSW
+#define E1000_ICS_PHYINT E1000_ICR_PHYINT
+#define E1000_ICS_EPRST E1000_ICR_EPRST
/* Interrupt Mask Set */
#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
#define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
#define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
#define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_IMS_DSW E1000_ICR_DSW
+#define E1000_IMS_PHYINT E1000_ICR_PHYINT
+#define E1000_IMS_EPRST E1000_ICR_EPRST
/* Interrupt Mask Clear */
#define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */
#define E1000_IMC_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
#define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
#define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_IMC_DSW E1000_ICR_DSW
+#define E1000_IMC_PHYINT E1000_ICR_PHYINT
+#define E1000_IMC_EPRST E1000_ICR_EPRST
/* Receive Control */
#define E1000_RCTL_RST 0x00000001 /* Software reset */
#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000
#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000
-#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00040000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000
#define E1000_MRQC_RSS_FIELD_IPV6_EX 0x00080000
#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000
/* Definitions for power management and wakeup registers */
/* Wake Up Control */
#define E1000_FWSM_MODE_SHIFT 1
#define E1000_FWSM_FW_VALID 0x00008000 /* FW established a valid mode */
+#define E1000_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI reset */
+#define E1000_FWSM_DISSW 0x10000000 /* FW disable SW Write Access */
+#define E1000_FWSM_SKUSEL_MASK 0x60000000 /* LAN SKU select */
+#define E1000_FWSM_SKUEL_SHIFT 29
+#define E1000_FWSM_SKUSEL_EMB 0x0 /* Embedded SKU */
+#define E1000_FWSM_SKUSEL_CONS 0x1 /* Consumer SKU */
+#define E1000_FWSM_SKUSEL_PERF_100 0x2 /* Perf & Corp 10/100 SKU */
+#define E1000_FWSM_SKUSEL_PERF_GBE 0x3 /* Perf & Copr GbE SKU */
+
/* FFLT Debug Register */
#define E1000_FFLT_DBG_INVC 0x00100000 /* Invalid /C/ code handling */
E1000_GCR_TXDSCW_NO_SNOOP | \
E1000_GCR_TXDSCR_NO_SNOOP)
+#define PCI_EX_82566_SNOOP_ALL PCI_EX_NO_SNOOP_ALL
+
#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
/* Function Active and Power State to MNG */
#define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003
#define EEPROM_PHY_CLASS_WORD 0x0007
#define EEPROM_INIT_CONTROL1_REG 0x000A
#define EEPROM_INIT_CONTROL2_REG 0x000F
+#define EEPROM_SWDEF_PINS_CTRL_PORT_1 0x0010
#define EEPROM_INIT_CONTROL3_PORT_B 0x0014
#define EEPROM_INIT_3GIO_3 0x001A
+#define EEPROM_SWDEF_PINS_CTRL_PORT_0 0x0020
#define EEPROM_INIT_CONTROL3_PORT_A 0x0024
#define EEPROM_CFG 0x0012
#define EEPROM_FLASH_VERSION 0x0032
/* Word definitions for ID LED Settings */
#define ID_LED_RESERVED_0000 0x0000
#define ID_LED_RESERVED_FFFF 0xFFFF
+#define ID_LED_RESERVED_82573 0xF746
+#define ID_LED_DEFAULT_82573 0x1811
#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
(ID_LED_OFF1_OFF2 << 8) | \
(ID_LED_DEF1_DEF2 << 4) | \
(ID_LED_DEF1_DEF2))
+#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \
+ (ID_LED_DEF1_OFF2 << 8) | \
+ (ID_LED_DEF1_ON2 << 4) | \
+ (ID_LED_DEF1_DEF2))
#define ID_LED_DEF1_DEF2 0x1
#define ID_LED_DEF1_ON2 0x2
#define ID_LED_DEF1_OFF2 0x3
#define EEPROM_WORD0F_ASM_DIR 0x2000
#define EEPROM_WORD0F_ANE 0x0800
#define EEPROM_WORD0F_SWPDIO_EXT 0x00F0
+#define EEPROM_WORD0F_LPLU 0x0001
+
+/* Mask bits for fields in Word 0x10/0x20 of the EEPROM */
+#define EEPROM_WORD1020_GIGA_DISABLE 0x0010
+#define EEPROM_WORD1020_GIGA_DISABLE_NON_D0A 0x0008
/* Mask bits for fields in Word 0x1a of the EEPROM */
#define EEPROM_WORD1A_ASPM_MASK 0x000C
#define E1000_EXTCNF_CTRL_D_UD_OWNER 0x00000010
#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
#define E1000_EXTCNF_CTRL_MDIO_HW_OWNERSHIP 0x00000040
-#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER 0x1FFF0000
+#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER 0x0FFF0000
#define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH 0x000000FF
#define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH 0x0000FF00
#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH 0x00FF0000
+#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001
+#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020
/* PBA constants */
+#define E1000_PBA_8K 0x0008 /* 8KB, default Rx allocation */
#define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */
#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */
#define E1000_PBA_22K 0x0016
#define E1000_PBA_24K 0x0018
#define E1000_PBA_30K 0x001E
#define E1000_PBA_32K 0x0020
+#define E1000_PBA_34K 0x0022
#define E1000_PBA_38K 0x0026
#define E1000_PBA_40K 0x0028
#define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */
+#define E1000_PBS_16K E1000_PBA_16K
+
/* Flow Control Constants */
#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
/* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */
#define AUTO_READ_DONE_TIMEOUT 10
/* Number of milliseconds we wait for PHY configuration done after MAC reset */
-#define PHY_CFG_TIMEOUT 40
+#define PHY_CFG_TIMEOUT 100
#define E1000_TX_BUFFER_SIZE ((uint32_t)1514)
#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
#define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */
+/* M88EC018 Rev 2 specific DownShift settings */
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_1X 0x0000
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_2X 0x0200
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_3X 0x0400
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_4X 0x0600
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_6X 0x0A00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_7X 0x0C00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_8X 0x0E00
+
/* IGP01E1000 Specific Port Config Register - R/W */
#define IGP01E1000_PSCFR_AUTO_MDIX_PAR_DETECT 0x0010
#define IGP01E1000_PSCFR_PRE_EN 0x0020
#define L1LXT971A_PHY_ID 0x001378E0
#define GG82563_E_PHY_ID 0x01410CA0
+
+/* Bits...
+ * 15-5: page
+ * 4-0: register offset
+ */
+#define PHY_PAGE_SHIFT 5
+#define PHY_REG(page, reg) \
+ (((page) << PHY_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
+
+#define IGP3_PHY_PORT_CTRL \
+ PHY_REG(769, 17) /* Port General Configuration */
+#define IGP3_PHY_RATE_ADAPT_CTRL \
+ PHY_REG(769, 25) /* Rate Adapter Control Register */
+
+#define IGP3_KMRN_FIFO_CTRL_STATS \
+ PHY_REG(770, 16) /* KMRN FIFO's control/status register */
+#define IGP3_KMRN_POWER_MNG_CTRL \
+ PHY_REG(770, 17) /* KMRN Power Management Control Register */
+#define IGP3_KMRN_INBAND_CTRL \
+ PHY_REG(770, 18) /* KMRN Inband Control Register */
+#define IGP3_KMRN_DIAG \
+ PHY_REG(770, 19) /* KMRN Diagnostic register */
+#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 /* RX PCS is not synced */
+#define IGP3_KMRN_ACK_TIMEOUT \
+ PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */
+
+#define IGP3_VR_CTRL \
+ PHY_REG(776, 18) /* Voltage regulator control register */
+#define IGP3_VR_CTRL_MODE_SHUT 0x0200 /* Enter powerdown, shutdown VRs */
+
+#define IGP3_CAPABILITY \
+ PHY_REG(776, 19) /* IGP3 Capability Register */
+
+/* Capabilities for SKU Control */
+#define IGP3_CAP_INITIATE_TEAM 0x0001 /* Able to initiate a team */
+#define IGP3_CAP_WFM 0x0002 /* Support WoL and PXE */
+#define IGP3_CAP_ASF 0x0004 /* Support ASF */
+#define IGP3_CAP_LPLU 0x0008 /* Support Low Power Link Up */
+#define IGP3_CAP_DC_AUTO_SPEED 0x0010 /* Support AC/DC Auto Link Speed */
+#define IGP3_CAP_SPD 0x0020 /* Support Smart Power Down */
+#define IGP3_CAP_MULT_QUEUE 0x0040 /* Support 2 tx & 2 rx queues */
+#define IGP3_CAP_RSS 0x0080 /* Support RSS */
+#define IGP3_CAP_8021PQ 0x0100 /* Support 802.1Q & 802.1p */
+#define IGP3_CAP_AMT_CB 0x0200 /* Support active manageability and circuit breaker */
+
+#define IGP3_PPC_JORDAN_EN 0x0001
+#define IGP3_PPC_JORDAN_GIGA_SPEED 0x0002
+
+#define IGP3_KMRN_PMC_EE_IDLE_LINK_DIS 0x0001
+#define IGP3_KMRN_PMC_K0S_ENTRY_LATENCY_MASK 0x001E
+#define IGP3_KMRN_PMC_K0S_MODE1_EN_GIGA 0x0020
+#define IGP3_KMRN_PMC_K0S_MODE1_EN_100 0x0040
+
+#define IGP3E1000_PHY_MISC_CTRL 0x1B /* Misc. Ctrl register */
+#define IGP3_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Duplex Manual Set */
+
+#define IGP3_KMRN_EXT_CTRL PHY_REG(770, 18)
+#define IGP3_KMRN_EC_DIS_INBAND 0x0080
+
+#define IGP03E1000_E_PHY_ID 0x02A80390
+#define IFE_E_PHY_ID 0x02A80330 /* 10/100 PHY */
+#define IFE_PLUS_E_PHY_ID 0x02A80320
+#define IFE_C_E_PHY_ID 0x02A80310
+
+#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 /* 100BaseTx Extended Status, Control and Address */
+#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY special control register */
+#define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive False Carrier Counter */
+#define IFE_PHY_RCV_DISCONNECT 0x14 /* 100BaseTx Receive Disconnet Counter */
+#define IFE_PHY_RCV_ERROT_FRAME 0x15 /* 100BaseTx Receive Error Frame Counter */
+#define IFE_PHY_RCV_SYMBOL_ERR 0x16 /* Receive Symbol Error Counter */
+#define IFE_PHY_PREM_EOF_ERR 0x17 /* 100BaseTx Receive Premature End Of Frame Error Counter */
+#define IFE_PHY_RCV_EOF_ERR 0x18 /* 10BaseT Receive End Of Frame Error Counter */
+#define IFE_PHY_TX_JABBER_DETECT 0x19 /* 10BaseT Transmit Jabber Detect Counter */
+#define IFE_PHY_EQUALIZER 0x1A /* PHY Equalizer Control and Status */
+#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY special control and LED configuration */
+#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control register */
+#define IFE_PHY_HWI_CONTROL 0x1D /* Hardware Integrity Control (HWI) */
+
+#define IFE_PESC_REDUCED_POWER_DOWN_DISABLE 0x2000 /* Defaut 1 = Disable auto reduced power down */
+#define IFE_PESC_100BTX_POWER_DOWN 0x0400 /* Indicates the power state of 100BASE-TX */
+#define IFE_PESC_10BTX_POWER_DOWN 0x0200 /* Indicates the power state of 10BASE-T */
+#define IFE_PESC_POLARITY_REVERSED 0x0100 /* Indicates 10BASE-T polarity */
+#define IFE_PESC_PHY_ADDR_MASK 0x007C /* Bit 6:2 for sampled PHY address */
+#define IFE_PESC_SPEED 0x0002 /* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */
+#define IFE_PESC_DUPLEX 0x0001 /* Auto-negotiation duplex result 1=Full, 0=Half */
+#define IFE_PESC_POLARITY_REVERSED_SHIFT 8
+
+#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100 /* 1 = Dyanmic Power Down disabled */
+#define IFE_PSC_FORCE_POLARITY 0x0020 /* 1=Reversed Polarity, 0=Normal */
+#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 /* 1=Auto Polarity Disabled, 0=Enabled */
+#define IFE_PSC_JABBER_FUNC_DISABLE 0x0001 /* 1=Jabber Disabled, 0=Normal Jabber Operation */
+#define IFE_PSC_FORCE_POLARITY_SHIFT 5
+#define IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT 4
+
+#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable MDI/MDI-X feature, default 0=disabled */
+#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDIX-X, 0=force MDI */
+#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */
+#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorthm is completed */
+#define IFE_PMC_MDIX_MODE_SHIFT 6
+#define IFE_PHC_MDIX_RESET_ALL_MASK 0x0000 /* Disable auto MDI-X */
+
+#define IFE_PHC_HWI_ENABLE 0x8000 /* Enable the HWI feature */
+#define IFE_PHC_ABILITY_CHECK 0x4000 /* 1= Test Passed, 0=failed */
+#define IFE_PHC_TEST_EXEC 0x2000 /* PHY launch test pulses on the wire */
+#define IFE_PHC_HIGHZ 0x0200 /* 1 = Open Circuit */
+#define IFE_PHC_LOWZ 0x0400 /* 1 = Short Circuit */
+#define IFE_PHC_LOW_HIGH_Z_MASK 0x0600 /* Mask for indication type of problem on the line */
+#define IFE_PHC_DISTANCE_MASK 0x01FF /* Mask for distance to the cable problem, in 80cm granularity */
+#define IFE_PHC_RESET_ALL_MASK 0x0000 /* Disable HWI */
+#define IFE_PSCL_PROBE_MODE 0x0020 /* LED Probe mode */
+#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */
+#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */
+
+#define ICH8_FLASH_COMMAND_TIMEOUT 500 /* 500 ms , should be adjusted */
+#define ICH8_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles , should be adjusted */
+#define ICH8_FLASH_SEG_SIZE_256 256
+#define ICH8_FLASH_SEG_SIZE_4K 4096
+#define ICH8_FLASH_SEG_SIZE_64K 65536
+
+#define ICH8_CYCLE_READ 0x0
+#define ICH8_CYCLE_RESERVED 0x1
+#define ICH8_CYCLE_WRITE 0x2
+#define ICH8_CYCLE_ERASE 0x3
+
+#define ICH8_FLASH_GFPREG 0x0000
+#define ICH8_FLASH_HSFSTS 0x0004
+#define ICH8_FLASH_HSFCTL 0x0006
+#define ICH8_FLASH_FADDR 0x0008
+#define ICH8_FLASH_FDATA0 0x0010
+#define ICH8_FLASH_FRACC 0x0050
+#define ICH8_FLASH_FREG0 0x0054
+#define ICH8_FLASH_FREG1 0x0058
+#define ICH8_FLASH_FREG2 0x005C
+#define ICH8_FLASH_FREG3 0x0060
+#define ICH8_FLASH_FPR0 0x0074
+#define ICH8_FLASH_FPR1 0x0078
+#define ICH8_FLASH_SSFSTS 0x0090
+#define ICH8_FLASH_SSFCTL 0x0092
+#define ICH8_FLASH_PREOP 0x0094
+#define ICH8_FLASH_OPTYPE 0x0096
+#define ICH8_FLASH_OPMENU 0x0098
+
+#define ICH8_FLASH_REG_MAPSIZE 0x00A0
+#define ICH8_FLASH_SECTOR_SIZE 4096
+#define ICH8_GFPREG_BASE_MASK 0x1FFF
+#define ICH8_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
+
+/* ICH8 GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
+/* Offset 04h HSFSTS */
+union ich8_hws_flash_status {
+ struct ich8_hsfsts {
+#ifdef E1000_BIG_ENDIAN
+ uint16_t reserved2 :6;
+ uint16_t fldesvalid :1;
+ uint16_t flockdn :1;
+ uint16_t flcdone :1;
+ uint16_t flcerr :1;
+ uint16_t dael :1;
+ uint16_t berasesz :2;
+ uint16_t flcinprog :1;
+ uint16_t reserved1 :2;
+#else
+ uint16_t flcdone :1; /* bit 0 Flash Cycle Done */
+ uint16_t flcerr :1; /* bit 1 Flash Cycle Error */
+ uint16_t dael :1; /* bit 2 Direct Access error Log */
+ uint16_t berasesz :2; /* bit 4:3 Block/Sector Erase Size */
+ uint16_t flcinprog :1; /* bit 5 flash SPI cycle in Progress */
+ uint16_t reserved1 :2; /* bit 13:6 Reserved */
+ uint16_t reserved2 :6; /* bit 13:6 Reserved */
+ uint16_t fldesvalid :1; /* bit 14 Flash Descriptor Valid */
+ uint16_t flockdn :1; /* bit 15 Flash Configuration Lock-Down */
+#endif
+ } hsf_status;
+ uint16_t regval;
+};
+
+/* ICH8 GbE Flash Hardware Sequencing Flash control Register bit breakdown */
+/* Offset 06h FLCTL */
+union ich8_hws_flash_ctrl {
+ struct ich8_hsflctl {
+#ifdef E1000_BIG_ENDIAN
+ uint16_t fldbcount :2;
+ uint16_t flockdn :6;
+ uint16_t flcgo :1;
+ uint16_t flcycle :2;
+ uint16_t reserved :5;
+#else
+ uint16_t flcgo :1; /* 0 Flash Cycle Go */
+ uint16_t flcycle :2; /* 2:1 Flash Cycle */
+ uint16_t reserved :5; /* 7:3 Reserved */
+ uint16_t fldbcount :2; /* 9:8 Flash Data Byte Count */
+ uint16_t flockdn :6; /* 15:10 Reserved */
+#endif
+ } hsf_ctrl;
+ uint16_t regval;
+};
+
+/* ICH8 Flash Region Access Permissions */
+union ich8_hws_flash_regacc {
+ struct ich8_flracc {
+#ifdef E1000_BIG_ENDIAN
+ uint32_t gmwag :8;
+ uint32_t gmrag :8;
+ uint32_t grwa :8;
+ uint32_t grra :8;
+#else
+ uint32_t grra :8; /* 0:7 GbE region Read Access */
+ uint32_t grwa :8; /* 8:15 GbE region Write Access */
+ uint32_t gmrag :8; /* 23:16 GbE Master Read Access Grant */
+ uint32_t gmwag :8; /* 31:24 GbE Master Write Access Grant */
+#endif
+ } hsf_flregacc;
+ uint16_t regval;
+};
+
/* Miscellaneous PHY bit definitions. */
#define PHY_PREAMBLE 0xFFFFFFFF
#define PHY_SOF 0x01
#else
#define DRIVERNAPI "-NAPI"
#endif
-#define DRV_VERSION "7.0.38-k4"DRIVERNAPI
+#define DRV_VERSION "7.1.9-k4"DRIVERNAPI
char e1000_driver_version[] = DRV_VERSION;
static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
INTEL_E1000_ETHERNET_DEVICE(0x1026),
INTEL_E1000_ETHERNET_DEVICE(0x1027),
INTEL_E1000_ETHERNET_DEVICE(0x1028),
+ INTEL_E1000_ETHERNET_DEVICE(0x1049),
+ INTEL_E1000_ETHERNET_DEVICE(0x104A),
+ INTEL_E1000_ETHERNET_DEVICE(0x104B),
+ INTEL_E1000_ETHERNET_DEVICE(0x104C),
+ INTEL_E1000_ETHERNET_DEVICE(0x104D),
INTEL_E1000_ETHERNET_DEVICE(0x105E),
INTEL_E1000_ETHERNET_DEVICE(0x105F),
INTEL_E1000_ETHERNET_DEVICE(0x1060),
INTEL_E1000_ETHERNET_DEVICE(0x109A),
INTEL_E1000_ETHERNET_DEVICE(0x10B5),
INTEL_E1000_ETHERNET_DEVICE(0x10B9),
+ INTEL_E1000_ETHERNET_DEVICE(0x10BA),
+ INTEL_E1000_ETHERNET_DEVICE(0x10BB),
/* required last entry */
{0,}
};
static void e1000_set_multi(struct net_device *netdev);
static void e1000_update_phy_info(unsigned long data);
static void e1000_watchdog(unsigned long data);
-static void e1000_watchdog_task(struct e1000_adapter *adapter);
static void e1000_82547_tx_fifo_stall(unsigned long data);
static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
static void e1000_restore_vlan(struct e1000_adapter *adapter);
-#ifdef CONFIG_PM
static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
+#ifdef CONFIG_PM
static int e1000_resume(struct pci_dev *pdev);
#endif
static void e1000_shutdown(struct pci_dev *pdev);
.probe = e1000_probe,
.remove = __devexit_p(e1000_remove),
/* Power Managment Hooks */
-#ifdef CONFIG_PM
.suspend = e1000_suspend,
+#ifdef CONFIG_PM
.resume = e1000_resume,
#endif
.shutdown = e1000_shutdown,
module_exit(e1000_exit_module);
+static int e1000_request_irq(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int flags, err = 0;
+
+ flags = IRQF_SHARED;
+#ifdef CONFIG_PCI_MSI
+ if (adapter->hw.mac_type > e1000_82547_rev_2) {
+ adapter->have_msi = TRUE;
+ if ((err = pci_enable_msi(adapter->pdev))) {
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate MSI interrupt Error: %d\n", err);
+ adapter->have_msi = FALSE;
+ }
+ }
+ if (adapter->have_msi)
+ flags &= ~IRQF_SHARED;
+#endif
+ if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags,
+ netdev->name, netdev)))
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate interrupt Error: %d\n", err);
+
+ return err;
+}
+
+static void e1000_free_irq(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ free_irq(adapter->pdev->irq, netdev);
+
+#ifdef CONFIG_PCI_MSI
+ if (adapter->have_msi)
+ pci_disable_msi(adapter->pdev);
+#endif
+}
+
/**
* e1000_irq_disable - Mask off interrupt generation on the NIC
* @adapter: board private structure
{
uint32_t ctrl_ext;
uint32_t swsm;
+ uint32_t extcnf;
/* Let firmware taken over control of h/w */
switch (adapter->hw.mac_type) {
swsm = E1000_READ_REG(&adapter->hw, SWSM);
E1000_WRITE_REG(&adapter->hw, SWSM,
swsm & ~E1000_SWSM_DRV_LOAD);
+ case e1000_ich8lan:
+ extcnf = E1000_READ_REG(&adapter->hw, CTRL_EXT);
+ E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
+ extcnf & ~E1000_CTRL_EXT_DRV_LOAD);
+ break;
default:
break;
}
{
uint32_t ctrl_ext;
uint32_t swsm;
+ uint32_t extcnf;
/* Let firmware know the driver has taken over */
switch (adapter->hw.mac_type) {
case e1000_82571:
E1000_WRITE_REG(&adapter->hw, SWSM,
swsm | E1000_SWSM_DRV_LOAD);
break;
+ case e1000_ich8lan:
+ extcnf = E1000_READ_REG(&adapter->hw, EXTCNF_CTRL);
+ E1000_WRITE_REG(&adapter->hw, EXTCNF_CTRL,
+ extcnf | E1000_EXTCNF_CTRL_SWFLAG);
+ break;
default:
break;
}
e1000_up(struct e1000_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
- int i, err;
+ int i;
/* hardware has been reset, we need to reload some things */
- /* Reset the PHY if it was previously powered down */
- if (adapter->hw.media_type == e1000_media_type_copper) {
- uint16_t mii_reg;
- e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
- if (mii_reg & MII_CR_POWER_DOWN)
- e1000_phy_hw_reset(&adapter->hw);
- }
-
e1000_set_multi(netdev);
e1000_restore_vlan(adapter);
E1000_DESC_UNUSED(ring));
}
-#ifdef CONFIG_PCI_MSI
- if (adapter->hw.mac_type > e1000_82547_rev_2) {
- adapter->have_msi = TRUE;
- if ((err = pci_enable_msi(adapter->pdev))) {
- DPRINTK(PROBE, ERR,
- "Unable to allocate MSI interrupt Error: %d\n", err);
- adapter->have_msi = FALSE;
- }
- }
-#endif
- if ((err = request_irq(adapter->pdev->irq, &e1000_intr,
- IRQF_SHARED | IRQF_SAMPLE_RANDOM,
- netdev->name, netdev))) {
- DPRINTK(PROBE, ERR,
- "Unable to allocate interrupt Error: %d\n", err);
- return err;
- }
-
adapter->tx_queue_len = netdev->tx_queue_len;
mod_timer(&adapter->watchdog_timer, jiffies);
return 0;
}
+/**
+ * e1000_power_up_phy - restore link in case the phy was powered down
+ * @adapter: address of board private structure
+ *
+ * The phy may be powered down to save power and turn off link when the
+ * driver is unloaded and wake on lan is not enabled (among others)
+ * *** this routine MUST be followed by a call to e1000_reset ***
+ *
+ **/
+
+static void e1000_power_up_phy(struct e1000_adapter *adapter)
+{
+ uint16_t mii_reg = 0;
+
+ /* Just clear the power down bit to wake the phy back up */
+ if (adapter->hw.media_type == e1000_media_type_copper) {
+ /* according to the manual, the phy will retain its
+ * settings across a power-down/up cycle */
+ e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
+ mii_reg &= ~MII_CR_POWER_DOWN;
+ e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
+ }
+}
+
+static void e1000_power_down_phy(struct e1000_adapter *adapter)
+{
+ boolean_t mng_mode_enabled = (adapter->hw.mac_type >= e1000_82571) &&
+ e1000_check_mng_mode(&adapter->hw);
+ /* Power down the PHY so no link is implied when interface is down
+ * The PHY cannot be powered down if any of the following is TRUE
+ * (a) WoL is enabled
+ * (b) AMT is active
+ * (c) SoL/IDER session is active */
+ if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 &&
+ adapter->hw.mac_type != e1000_ich8lan &&
+ adapter->hw.media_type == e1000_media_type_copper &&
+ !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN) &&
+ !mng_mode_enabled &&
+ !e1000_check_phy_reset_block(&adapter->hw)) {
+ uint16_t mii_reg = 0;
+ e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
+ mii_reg |= MII_CR_POWER_DOWN;
+ e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
+ mdelay(1);
+ }
+}
+
void
e1000_down(struct e1000_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
- boolean_t mng_mode_enabled = (adapter->hw.mac_type >= e1000_82571) &&
- e1000_check_mng_mode(&adapter->hw);
e1000_irq_disable(adapter);
- free_irq(adapter->pdev->irq, netdev);
-#ifdef CONFIG_PCI_MSI
- if (adapter->hw.mac_type > e1000_82547_rev_2 &&
- adapter->have_msi == TRUE)
- pci_disable_msi(adapter->pdev);
-#endif
del_timer_sync(&adapter->tx_fifo_stall_timer);
del_timer_sync(&adapter->watchdog_timer);
del_timer_sync(&adapter->phy_info_timer);
e1000_reset(adapter);
e1000_clean_all_tx_rings(adapter);
e1000_clean_all_rx_rings(adapter);
+}
- /* Power down the PHY so no link is implied when interface is down *
- * The PHY cannot be powered down if any of the following is TRUE *
- * (a) WoL is enabled
- * (b) AMT is active
- * (c) SoL/IDER session is active */
- if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 &&
- adapter->hw.media_type == e1000_media_type_copper &&
- !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN) &&
- !mng_mode_enabled &&
- !e1000_check_phy_reset_block(&adapter->hw)) {
- uint16_t mii_reg;
- e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
- mii_reg |= MII_CR_POWER_DOWN;
- e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
- mdelay(1);
- }
+void
+e1000_reinit_locked(struct e1000_adapter *adapter)
+{
+ WARN_ON(in_interrupt());
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+ e1000_down(adapter);
+ e1000_up(adapter);
+ clear_bit(__E1000_RESETTING, &adapter->flags);
}
void
case e1000_82573:
pba = E1000_PBA_12K;
break;
+ case e1000_ich8lan:
+ pba = E1000_PBA_8K;
+ break;
default:
pba = E1000_PBA_48K;
break;
/* Set the FC high water mark to 90% of the FIFO size.
* Required to clear last 3 LSB */
fc_high_water_mark = ((pba * 9216)/10) & 0xFFF8;
+ /* We can't use 90% on small FIFOs because the remainder
+ * would be less than 1 full frame. In this case, we size
+ * it to allow at least a full frame above the high water
+ * mark. */
+ if (pba < E1000_PBA_16K)
+ fc_high_water_mark = (pba * 1024) - 1600;
adapter->hw.fc_high_water = fc_high_water_mark;
adapter->hw.fc_low_water = fc_high_water_mark - 8;
e1000_reset_adaptive(&adapter->hw);
e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
+
+ if (!adapter->smart_power_down &&
+ (adapter->hw.mac_type == e1000_82571 ||
+ adapter->hw.mac_type == e1000_82572)) {
+ uint16_t phy_data = 0;
+ /* speed up time to link by disabling smart power down, ignore
+ * the return value of this function because there is nothing
+ * different we would do if it failed */
+ e1000_read_phy_reg(&adapter->hw, IGP02E1000_PHY_POWER_MGMT,
+ &phy_data);
+ phy_data &= ~IGP02E1000_PM_SPD;
+ e1000_write_phy_reg(&adapter->hw, IGP02E1000_PHY_POWER_MGMT,
+ phy_data);
+ }
+
+ if (adapter->hw.mac_type < e1000_ich8lan)
+ /* FIXME: this code is duplicate and wrong for PCI Express */
if (adapter->en_mng_pt) {
manc = E1000_READ_REG(&adapter->hw, MANC);
manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST);
struct net_device *netdev;
struct e1000_adapter *adapter;
unsigned long mmio_start, mmio_len;
+ unsigned long flash_start, flash_len;
static int cards_found = 0;
static int e1000_ksp3_port_a = 0; /* global ksp3 port a indication */
if ((err = pci_enable_device(pdev)))
return err;
- if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
+ if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK)) &&
+ !(err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))) {
pci_using_dac = 1;
} else {
- if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) {
+ if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) &&
+ (err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK))) {
E1000_ERR("No usable DMA configuration, aborting\n");
return err;
}
if ((err = e1000_sw_init(adapter)))
goto err_sw_init;
+ /* Flash BAR mapping must happen after e1000_sw_init
+ * because it depends on mac_type */
+ if ((adapter->hw.mac_type == e1000_ich8lan) &&
+ (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
+ flash_start = pci_resource_start(pdev, 1);
+ flash_len = pci_resource_len(pdev, 1);
+ adapter->hw.flash_address = ioremap(flash_start, flash_len);
+ if (!adapter->hw.flash_address) {
+ err = -EIO;
+ goto err_flashmap;
+ }
+ }
+
if ((err = e1000_check_phy_reset_block(&adapter->hw)))
DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
NETIF_F_HW_VLAN_TX |
NETIF_F_HW_VLAN_RX |
NETIF_F_HW_VLAN_FILTER;
+ if (adapter->hw.mac_type == e1000_ich8lan)
+ netdev->features &= ~NETIF_F_HW_VLAN_FILTER;
}
#ifdef NETIF_F_TSO
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
- /* hard_start_xmit is safe against parallel locking */
netdev->features |= NETIF_F_LLTX;
adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw);
+ /* initialize eeprom parameters */
+
+ if (e1000_init_eeprom_params(&adapter->hw)) {
+ E1000_ERR("EEPROM initialization failed\n");
+ return -EIO;
+ }
+
/* before reading the EEPROM, reset the controller to
* put the device in a known good starting state */
adapter->watchdog_timer.function = &e1000_watchdog;
adapter->watchdog_timer.data = (unsigned long) adapter;
- INIT_WORK(&adapter->watchdog_task,
- (void (*)(void *))e1000_watchdog_task, adapter);
-
init_timer(&adapter->phy_info_timer);
adapter->phy_info_timer.function = &e1000_update_phy_info;
adapter->phy_info_timer.data = (unsigned long) adapter;
EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
eeprom_apme_mask = E1000_EEPROM_82544_APM;
break;
+ case e1000_ich8lan:
+ e1000_read_eeprom(&adapter->hw,
+ EEPROM_INIT_CONTROL1_REG, 1, &eeprom_data);
+ eeprom_apme_mask = E1000_EEPROM_ICH8_APME;
+ break;
case e1000_82546:
case e1000_82546_rev_3:
case e1000_82571:
return 0;
err_register:
+ if (adapter->hw.flash_address)
+ iounmap(adapter->hw.flash_address);
+err_flashmap:
err_sw_init:
err_eeprom:
iounmap(adapter->hw.hw_addr);
flush_scheduled_work();
if (adapter->hw.mac_type >= e1000_82540 &&
+ adapter->hw.mac_type != e1000_ich8lan &&
adapter->hw.media_type == e1000_media_type_copper) {
manc = E1000_READ_REG(&adapter->hw, MANC);
if (manc & E1000_MANC_SMBUS_EN) {
#endif
iounmap(adapter->hw.hw_addr);
+ if (adapter->hw.flash_address)
+ iounmap(adapter->hw.flash_address);
pci_release_regions(pdev);
free_netdev(netdev);
pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
- adapter->rx_buffer_len = MAXIMUM_ETHERNET_FRAME_SIZE;
+ adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
adapter->rx_ps_bsize0 = E1000_RXBUFFER_128;
hw->max_frame_size = netdev->mtu +
ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
return -EIO;
}
- /* initialize eeprom parameters */
-
- if (e1000_init_eeprom_params(hw)) {
- E1000_ERR("EEPROM initialization failed\n");
- return -EIO;
- }
-
switch (hw->mac_type) {
default:
break;
struct e1000_adapter *adapter = netdev_priv(netdev);
int err;
+ /* disallow open during test */
+ if (test_bit(__E1000_DRIVER_TESTING, &adapter->flags))
+ return -EBUSY;
+
/* allocate transmit descriptors */
if ((err = e1000_setup_all_tx_resources(adapter)))
if ((err = e1000_setup_all_rx_resources(adapter)))
goto err_setup_rx;
+ err = e1000_request_irq(adapter);
+ if (err)
+ goto err_up;
+
+ e1000_power_up_phy(adapter);
+
if ((err = e1000_up(adapter)))
goto err_up;
adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
{
struct e1000_adapter *adapter = netdev_priv(netdev);
+ WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
e1000_down(adapter);
+ e1000_power_down_phy(adapter);
+ e1000_free_irq(adapter);
e1000_free_all_tx_resources(adapter);
e1000_free_all_rx_resources(adapter);
int size;
size = sizeof(struct e1000_buffer) * txdr->count;
-
- txdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus));
+ txdr->buffer_info = vmalloc(size);
if (!txdr->buffer_info) {
DPRINTK(PROBE, ERR,
"Unable to allocate memory for the transmit descriptor ring\n");
tdba = adapter->tx_ring[0].dma;
tdlen = adapter->tx_ring[0].count *
sizeof(struct e1000_tx_desc);
- E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
- E1000_WRITE_REG(hw, TDBAH, (tdba >> 32));
E1000_WRITE_REG(hw, TDLEN, tdlen);
- E1000_WRITE_REG(hw, TDH, 0);
+ E1000_WRITE_REG(hw, TDBAH, (tdba >> 32));
+ E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
E1000_WRITE_REG(hw, TDT, 0);
+ E1000_WRITE_REG(hw, TDH, 0);
adapter->tx_ring[0].tdh = E1000_TDH;
adapter->tx_ring[0].tdt = E1000_TDT;
break;
int size, desc_len;
size = sizeof(struct e1000_buffer) * rxdr->count;
- rxdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus));
+ rxdr->buffer_info = vmalloc(size);
if (!rxdr->buffer_info) {
DPRINTK(PROBE, ERR,
"Unable to allocate memory for the receive descriptor ring\n");
E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
(adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT);
- if (adapter->hw.mac_type > e1000_82543)
- rctl |= E1000_RCTL_SECRC;
-
if (adapter->hw.tbi_compatibility_on == 1)
rctl |= E1000_RCTL_SBP;
else
rfctl |= E1000_RFCTL_IPV6_DIS;
E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl);
- rctl |= E1000_RCTL_DTYP_PS | E1000_RCTL_SECRC;
+ rctl |= E1000_RCTL_DTYP_PS;
psrctl |= adapter->rx_ps_bsize0 >>
E1000_PSRCTL_BSIZE0_SHIFT;
case 1:
default:
rdba = adapter->rx_ring[0].dma;
- E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
- E1000_WRITE_REG(hw, RDBAH, (rdba >> 32));
E1000_WRITE_REG(hw, RDLEN, rdlen);
- E1000_WRITE_REG(hw, RDH, 0);
+ E1000_WRITE_REG(hw, RDBAH, (rdba >> 32));
+ E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
E1000_WRITE_REG(hw, RDT, 0);
+ E1000_WRITE_REG(hw, RDH, 0);
adapter->rx_ring[0].rdh = E1000_RDH;
adapter->rx_ring[0].rdt = E1000_RDT;
break;
E1000_WRITE_REG(hw, RXCSUM, rxcsum);
}
- if (hw->mac_type == e1000_82573)
- E1000_WRITE_REG(hw, ERT, 0x0100);
-
/* Enable Receives */
E1000_WRITE_REG(hw, RCTL, rctl);
}
uint32_t rctl;
uint32_t hash_value;
int i, rar_entries = E1000_RAR_ENTRIES;
+ int mta_reg_count = (hw->mac_type == e1000_ich8lan) ?
+ E1000_NUM_MTA_REGISTERS_ICH8LAN :
+ E1000_NUM_MTA_REGISTERS;
+
+ if (adapter->hw.mac_type == e1000_ich8lan)
+ rar_entries = E1000_RAR_ENTRIES_ICH8LAN;
/* reserve RAR[14] for LAA over-write work-around */
if (adapter->hw.mac_type == e1000_82571)
mc_ptr = mc_ptr->next;
} else {
E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
+ E1000_WRITE_FLUSH(hw);
E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
+ E1000_WRITE_FLUSH(hw);
}
}
/* clear the old settings from the multicast hash table */
- for (i = 0; i < E1000_NUM_MTA_REGISTERS; i++)
+ for (i = 0; i < mta_reg_count; i++) {
E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
+ E1000_WRITE_FLUSH(hw);
+ }
/* load any remaining addresses into the hash table */
e1000_watchdog(unsigned long data)
{
struct e1000_adapter *adapter = (struct e1000_adapter *) data;
-
- /* Do the rest outside of interrupt context */
- schedule_work(&adapter->watchdog_task);
-}
-
-static void
-e1000_watchdog_task(struct e1000_adapter *adapter)
-{
struct net_device *netdev = adapter->netdev;
struct e1000_tx_ring *txdr = adapter->tx_ring;
uint32_t link, tctl;
-
- e1000_check_for_link(&adapter->hw);
+ int32_t ret_val;
+
+ ret_val = e1000_check_for_link(&adapter->hw);
+ if ((ret_val == E1000_ERR_PHY) &&
+ (adapter->hw.phy_type == e1000_phy_igp_3) &&
+ (E1000_READ_REG(&adapter->hw, CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
+ /* See e1000_kumeran_lock_loss_workaround() */
+ DPRINTK(LINK, INFO,
+ "Gigabit has been disabled, downgrading speed\n");
+ }
if (adapter->hw.mac_type == e1000_82573) {
e1000_enable_tx_pkt_filtering(&adapter->hw);
if (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)
uint8_t ipcss, ipcso, tucss, tucso, hdr_len;
int err;
- if (skb_shinfo(skb)->gso_size) {
+ if (skb_is_gso(skb)) {
if (skb_header_cloned(skb)) {
err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
if (err)
* tso gets written back prematurely before the data is fully
* DMA'd to the controller */
if (!skb->data_len && tx_ring->last_tx_tso &&
- !skb_shinfo(skb)->gso_size) {
+ !skb_is_gso(skb)) {
tx_ring->last_tx_tso = 0;
size -= 4;
}
case e1000_82571:
case e1000_82572:
case e1000_82573:
+ case e1000_ich8lan:
pull_size = min((unsigned int)4, skb->data_len);
if (!__pskb_pull_tail(skb, pull_size)) {
- printk(KERN_ERR
+ DPRINTK(DRV, ERR,
"__pskb_pull_tail failed.\n");
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
#ifdef NETIF_F_TSO
/* Controller Erratum workaround */
- if (!skb->data_len && tx_ring->last_tx_tso &&
- !skb_shinfo(skb)->gso_size)
+ if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb))
count++;
#endif
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- e1000_down(adapter);
- e1000_up(adapter);
+ e1000_reinit_locked(adapter);
}
/**
/* Adapter-specific max frame size limits. */
switch (adapter->hw.mac_type) {
case e1000_undefined ... e1000_82542_rev2_1:
+ case e1000_ich8lan:
if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
return -EINVAL;
adapter->rx_buffer_len = E1000_RXBUFFER_16384;
/* adjust allocation if LPE protects us, and we aren't using SBP */
-#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
if (!adapter->hw.tbi_compatibility_on &&
((max_frame == MAXIMUM_ETHERNET_FRAME_SIZE) ||
(max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
netdev->mtu = new_mtu;
- if (netif_running(netdev)) {
- e1000_down(adapter);
- e1000_up(adapter);
- }
+ if (netif_running(netdev))
+ e1000_reinit_locked(adapter);
adapter->hw.max_frame_size = max_frame;
adapter->stats.bprc += E1000_READ_REG(hw, BPRC);
adapter->stats.mprc += E1000_READ_REG(hw, MPRC);
adapter->stats.roc += E1000_READ_REG(hw, ROC);
+
+ if (adapter->hw.mac_type != e1000_ich8lan) {
adapter->stats.prc64 += E1000_READ_REG(hw, PRC64);
adapter->stats.prc127 += E1000_READ_REG(hw, PRC127);
adapter->stats.prc255 += E1000_READ_REG(hw, PRC255);
adapter->stats.prc511 += E1000_READ_REG(hw, PRC511);
adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023);
adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522);
+ }
adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS);
adapter->stats.mpc += E1000_READ_REG(hw, MPC);
adapter->stats.totl += E1000_READ_REG(hw, TOTL);
adapter->stats.toth += E1000_READ_REG(hw, TOTH);
adapter->stats.tpr += E1000_READ_REG(hw, TPR);
+
+ if (adapter->hw.mac_type != e1000_ich8lan) {
adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64);
adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127);
adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255);
adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511);
adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023);
adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522);
+ }
+
adapter->stats.mptc += E1000_READ_REG(hw, MPTC);
adapter->stats.bptc += E1000_READ_REG(hw, BPTC);
if (hw->mac_type > e1000_82547_rev_2) {
adapter->stats.iac += E1000_READ_REG(hw, IAC);
adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC);
+
+ if (adapter->hw.mac_type != e1000_ich8lan) {
adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
+ }
}
/* Fill out the OS statistics structure */
E1000_WRITE_REG(hw, IMC, ~0);
E1000_WRITE_FLUSH(hw);
}
- if (likely(netif_rx_schedule_prep(&adapter->polling_netdev[0])))
- __netif_rx_schedule(&adapter->polling_netdev[0]);
+ if (likely(netif_rx_schedule_prep(netdev)))
+ __netif_rx_schedule(netdev);
else
e1000_irq_enable(adapter);
#else
{
struct e1000_adapter *adapter;
int work_to_do = min(*budget, poll_dev->quota);
- int tx_cleaned = 0, i = 0, work_done = 0;
+ int tx_cleaned = 0, work_done = 0;
/* Must NOT use netdev_priv macro here. */
adapter = poll_dev->priv;
/* Keep link state information with original netdev */
- if (!netif_carrier_ok(adapter->netdev))
+ if (!netif_carrier_ok(poll_dev))
goto quit_polling;
- while (poll_dev != &adapter->polling_netdev[i]) {
- i++;
- BUG_ON(i == adapter->num_rx_queues);
+ /* e1000_clean is called per-cpu. This lock protects
+ * tx_ring[0] from being cleaned by multiple cpus
+ * simultaneously. A failure obtaining the lock means
+ * tx_ring[0] is currently being cleaned anyway. */
+ if (spin_trylock(&adapter->tx_queue_lock)) {
+ tx_cleaned = e1000_clean_tx_irq(adapter,
+ &adapter->tx_ring[0]);
+ spin_unlock(&adapter->tx_queue_lock);
}
- if (likely(adapter->num_tx_queues == 1)) {
- /* e1000_clean is called per-cpu. This lock protects
- * tx_ring[0] from being cleaned by multiple cpus
- * simultaneously. A failure obtaining the lock means
- * tx_ring[0] is currently being cleaned anyway. */
- if (spin_trylock(&adapter->tx_queue_lock)) {
- tx_cleaned = e1000_clean_tx_irq(adapter,
- &adapter->tx_ring[0]);
- spin_unlock(&adapter->tx_queue_lock);
- }
- } else
- tx_cleaned = e1000_clean_tx_irq(adapter, &adapter->tx_ring[i]);
-
- adapter->clean_rx(adapter, &adapter->rx_ring[i],
+ adapter->clean_rx(adapter, &adapter->rx_ring[0],
&work_done, work_to_do);
*budget -= work_done;
/* If no Tx and not enough Rx work done, exit the polling mode */
if ((!tx_cleaned && (work_done == 0)) ||
- !netif_running(adapter->netdev)) {
+ !netif_running(poll_dev)) {
quit_polling:
netif_rx_complete(poll_dev);
e1000_irq_enable(adapter);
length = le16_to_cpu(rx_desc->length);
+ /* adjust length to remove Ethernet CRC */
+ length -= 4;
+
if (unlikely(!(status & E1000_RXD_STAT_EOP))) {
/* All receives must fit into a single buffer */
E1000_DBG("%s: Receive packet consumed multiple"
" buffers\n", netdev->name);
- dev_kfree_skb_irq(skb);
+ /* recycle */
+ buffer_info-> skb = skb;
goto next_desc;
}
buffer_info = &rx_ring->buffer_info[i];
while (staterr & E1000_RXD_STAT_DD) {
- buffer_info = &rx_ring->buffer_info[i];
ps_page = &rx_ring->ps_page[i];
ps_page_dma = &rx_ring->ps_page_dma[i];
#ifdef CONFIG_E1000_NAPI
pci_dma_sync_single_for_device(pdev,
ps_page_dma->ps_page_dma[0],
PAGE_SIZE, PCI_DMA_FROMDEVICE);
+ /* remove the CRC */
+ l1 -= 4;
skb_put(skb, l1);
- length += l1;
goto copydone;
} /* if */
}
skb->truesize += length;
}
+ /* strip the ethernet crc, problem is we're using pages now so
+ * this whole operation can get a little cpu intensive */
+ pskb_trim(skb, skb->len - 4);
+
copydone:
e1000_rx_checksum(adapter, staterr,
le16_to_cpu(rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
return retval;
}
}
- if (netif_running(adapter->netdev)) {
- e1000_down(adapter);
- e1000_up(adapter);
- } else
+ if (netif_running(adapter->netdev))
+ e1000_reinit_locked(adapter);
+ else
e1000_reset(adapter);
break;
case M88E1000_PHY_SPEC_CTRL:
case PHY_CTRL:
if (mii_reg & MII_CR_POWER_DOWN)
break;
- if (netif_running(adapter->netdev)) {
- e1000_down(adapter);
- e1000_up(adapter);
- } else
+ if (netif_running(adapter->netdev))
+ e1000_reinit_locked(adapter);
+ else
e1000_reset(adapter);
break;
}
ctrl |= E1000_CTRL_VME;
E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
+ if (adapter->hw.mac_type != e1000_ich8lan) {
/* enable VLAN receive filtering */
rctl = E1000_READ_REG(&adapter->hw, RCTL);
rctl |= E1000_RCTL_VFE;
rctl &= ~E1000_RCTL_CFIEN;
E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
e1000_update_mng_vlan(adapter);
+ }
} else {
/* disable VLAN tag insert/strip */
ctrl = E1000_READ_REG(&adapter->hw, CTRL);
ctrl &= ~E1000_CTRL_VME;
E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
+ if (adapter->hw.mac_type != e1000_ich8lan) {
/* disable VLAN filtering */
rctl = E1000_READ_REG(&adapter->hw, RCTL);
rctl &= ~E1000_RCTL_VFE;
e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
}
+ }
}
e1000_irq_enable(adapter);
struct e1000_adapter *adapter = netdev_priv(netdev);
uint32_t ctrl, ctrl_ext, rctl, manc, status;
uint32_t wufc = adapter->wol;
+#ifdef CONFIG_PM
int retval = 0;
+#endif
netif_device_detach(netdev);
- if (netif_running(netdev))
+ if (netif_running(netdev)) {
+ WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
e1000_down(adapter);
+ }
#ifdef CONFIG_PM
/* Implement our own version of pci_save_state(pdev) because pci-
pci_enable_wake(pdev, PCI_D3cold, 0);
}
+ /* FIXME: this code is incorrect for PCI Express */
if (adapter->hw.mac_type >= e1000_82540 &&
+ adapter->hw.mac_type != e1000_ich8lan &&
adapter->hw.media_type == e1000_media_type_copper) {
manc = E1000_READ_REG(&adapter->hw, MANC);
if (manc & E1000_MANC_SMBUS_EN) {
}
}
+ if (adapter->hw.phy_type == e1000_phy_igp_3)
+ e1000_phy_powerdown_workaround(&adapter->hw);
+
/* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant. */
e1000_release_hw_control(adapter);
netif_device_attach(netdev);
+ /* FIXME: this code is incorrect for PCI Express */
if (adapter->hw.mac_type >= e1000_82540 &&
+ adapter->hw.mac_type != e1000_ich8lan &&
adapter->hw.media_type == e1000_media_type_copper) {
manc = E1000_READ_REG(&adapter->hw, MANC);
manc &= ~(E1000_MANC_ARP_EN);
e1000_netpoll(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
+
disable_irq(adapter->pdev->irq);
e1000_intr(adapter->pdev->irq, netdev, NULL);
e1000_clean_tx_irq(adapter, adapter->tx_ring);
#define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, STATUS)
+#define E1000_WRITE_ICH8_REG(a, reg, value) ( \
+ writel((value), ((a)->flash_address + reg)))
+
+#define E1000_READ_ICH8_REG(a, reg) ( \
+ readl((a)->flash_address + reg))
+
+#define E1000_WRITE_ICH8_REG16(a, reg, value) ( \
+ writew((value), ((a)->flash_address + reg)))
+
+#define E1000_READ_ICH8_REG16(a, reg) ( \
+ readw((a)->flash_address + reg))
+
+
#endif /* _E1000_OSDEP_H_ */
*/
#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
+/* Module Parameters are always initialized to -1, so that the driver
+ * can tell the difference between no user specified value or the
+ * user asking for the default value.
+ * The true default values are loaded in when e1000_check_options is called.
+ *
+ * This is a GCC extension to ANSI C.
+ * See the item "Labeled Elements in Initializers" in the section
+ * "Extensions to the C Language Family" of the GCC documentation.
+ */
+
#define E1000_PARAM(X, desc) \
static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
static int num_##X = 0; \
E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
+/* Enable Smart Power Down of the PHY
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 0 (disabled)
+ */
+
+E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
+
+/* Enable Kumeran Lock Loss workaround
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+
+E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
+
#define AUTONEG_ADV_DEFAULT 0x2F
#define AUTONEG_ADV_MASK 0x2F
#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
DPRINTK(PROBE, NOTICE,
"Warning: no configuration for board #%i\n", bd);
DPRINTK(PROBE, NOTICE, "Using defaults for all values\n");
+ bd = E1000_MAX_NIC;
}
{ /* Transmit Descriptor Count */
opt.arg.r.max = mac_type < e1000_82544 ?
E1000_MAX_TXD : E1000_MAX_82544_TXD;
- if (num_TxDescriptors > bd) {
- tx_ring->count = TxDescriptors[bd];
- e1000_validate_option(&tx_ring->count, &opt, adapter);
- E1000_ROUNDUP(tx_ring->count,
- REQ_TX_DESCRIPTOR_MULTIPLE);
- } else {
- tx_ring->count = opt.def;
- }
+ tx_ring->count = TxDescriptors[bd];
+ e1000_validate_option(&tx_ring->count, &opt, adapter);
+ E1000_ROUNDUP(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE);
for (i = 0; i < adapter->num_tx_queues; i++)
tx_ring[i].count = tx_ring->count;
}
opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_RXD :
E1000_MAX_82544_RXD;
- if (num_RxDescriptors > bd) {
- rx_ring->count = RxDescriptors[bd];
- e1000_validate_option(&rx_ring->count, &opt, adapter);
- E1000_ROUNDUP(rx_ring->count,
- REQ_RX_DESCRIPTOR_MULTIPLE);
- } else {
- rx_ring->count = opt.def;
- }
+ rx_ring->count = RxDescriptors[bd];
+ e1000_validate_option(&rx_ring->count, &opt, adapter);
+ E1000_ROUNDUP(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE);
for (i = 0; i < adapter->num_rx_queues; i++)
rx_ring[i].count = rx_ring->count;
}
.def = OPTION_ENABLED
};
- if (num_XsumRX > bd) {
- int rx_csum = XsumRX[bd];
- e1000_validate_option(&rx_csum, &opt, adapter);
- adapter->rx_csum = rx_csum;
- } else {
- adapter->rx_csum = opt.def;
- }
+ int rx_csum = XsumRX[bd];
+ e1000_validate_option(&rx_csum, &opt, adapter);
+ adapter->rx_csum = rx_csum;
}
{ /* Flow Control */
.p = fc_list }}
};
- if (num_FlowControl > bd) {
- int fc = FlowControl[bd];
- e1000_validate_option(&fc, &opt, adapter);
- adapter->hw.fc = adapter->hw.original_fc = fc;
- } else {
- adapter->hw.fc = adapter->hw.original_fc = opt.def;
- }
+ int fc = FlowControl[bd];
+ e1000_validate_option(&fc, &opt, adapter);
+ adapter->hw.fc = adapter->hw.original_fc = fc;
}
{ /* Transmit Interrupt Delay */
struct e1000_option opt = {
.max = MAX_TXDELAY }}
};
- if (num_TxIntDelay > bd) {
- adapter->tx_int_delay = TxIntDelay[bd];
- e1000_validate_option(&adapter->tx_int_delay, &opt,
- adapter);
- } else {
- adapter->tx_int_delay = opt.def;
- }
+ adapter->tx_int_delay = TxIntDelay[bd];
+ e1000_validate_option(&adapter->tx_int_delay, &opt, adapter);
}
{ /* Transmit Absolute Interrupt Delay */
struct e1000_option opt = {
.max = MAX_TXABSDELAY }}
};
- if (num_TxAbsIntDelay > bd) {
- adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
- e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
- adapter);
- } else {
- adapter->tx_abs_int_delay = opt.def;
- }
+ adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
+ e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
+ adapter);
}
{ /* Receive Interrupt Delay */
struct e1000_option opt = {
.max = MAX_RXDELAY }}
};
- if (num_RxIntDelay > bd) {
- adapter->rx_int_delay = RxIntDelay[bd];
- e1000_validate_option(&adapter->rx_int_delay, &opt,
- adapter);
- } else {
- adapter->rx_int_delay = opt.def;
- }
+ adapter->rx_int_delay = RxIntDelay[bd];
+ e1000_validate_option(&adapter->rx_int_delay, &opt, adapter);
}
{ /* Receive Absolute Interrupt Delay */
struct e1000_option opt = {
.max = MAX_RXABSDELAY }}
};
- if (num_RxAbsIntDelay > bd) {
- adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
- e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
- adapter);
- } else {
- adapter->rx_abs_int_delay = opt.def;
- }
+ adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
+ e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
+ adapter);
}
{ /* Interrupt Throttling Rate */
struct e1000_option opt = {
.max = MAX_ITR }}
};
- if (num_InterruptThrottleRate > bd) {
- adapter->itr = InterruptThrottleRate[bd];
- switch (adapter->itr) {
- case 0:
- DPRINTK(PROBE, INFO, "%s turned off\n",
- opt.name);
- break;
- case 1:
- DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
- opt.name);
- break;
- default:
- e1000_validate_option(&adapter->itr, &opt,
- adapter);
- break;
- }
- } else {
- adapter->itr = opt.def;
+ adapter->itr = InterruptThrottleRate[bd];
+ switch (adapter->itr) {
+ case 0:
+ DPRINTK(PROBE, INFO, "%s turned off\n", opt.name);
+ break;
+ case 1:
+ DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
+ opt.name);
+ break;
+ default:
+ e1000_validate_option(&adapter->itr, &opt, adapter);
+ break;
}
}
+ { /* Smart Power Down */
+ struct e1000_option opt = {
+ .type = enable_option,
+ .name = "PHY Smart Power Down",
+ .err = "defaulting to Disabled",
+ .def = OPTION_DISABLED
+ };
+
+ int spd = SmartPowerDownEnable[bd];
+ e1000_validate_option(&spd, &opt, adapter);
+ adapter->smart_power_down = spd;
+ }
+ { /* Kumeran Lock Loss Workaround */
+ struct e1000_option opt = {
+ .type = enable_option,
+ .name = "Kumeran Lock Loss Workaround",
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
+ };
+
+ int kmrn_lock_loss = KumeranLockLoss[bd];
+ e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
+ adapter->hw.kmrn_lock_loss_workaround_disabled = !kmrn_lock_loss;
+ }
switch (adapter->hw.media_type) {
case e1000_media_type_fiber:
e1000_check_fiber_options(struct e1000_adapter *adapter)
{
int bd = adapter->bd_number;
- if (num_Speed > bd) {
+ bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd;
+ if ((Speed[bd] != OPTION_UNSET)) {
DPRINTK(PROBE, INFO, "Speed not valid for fiber adapters, "
"parameter ignored\n");
}
- if (num_Duplex > bd) {
+ if ((Duplex[bd] != OPTION_UNSET)) {
DPRINTK(PROBE, INFO, "Duplex not valid for fiber adapters, "
"parameter ignored\n");
}
- if ((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) {
+ if ((AutoNeg[bd] != OPTION_UNSET) && (AutoNeg[bd] != 0x20)) {
DPRINTK(PROBE, INFO, "AutoNeg other than 1000/Full is "
"not valid for fiber adapters, "
"parameter ignored\n");
{
int speed, dplx, an;
int bd = adapter->bd_number;
+ bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd;
{ /* Speed */
struct e1000_opt_list speed_list[] = {{ 0, "" },
.p = speed_list }}
};
- if (num_Speed > bd) {
- speed = Speed[bd];
- e1000_validate_option(&speed, &opt, adapter);
- } else {
- speed = opt.def;
- }
+ speed = Speed[bd];
+ e1000_validate_option(&speed, &opt, adapter);
}
{ /* Duplex */
struct e1000_opt_list dplx_list[] = {{ 0, "" },
"Speed/Duplex/AutoNeg parameter ignored.\n");
return;
}
- if (num_Duplex > bd) {
- dplx = Duplex[bd];
- e1000_validate_option(&dplx, &opt, adapter);
- } else {
- dplx = opt.def;
- }
+ dplx = Duplex[bd];
+ e1000_validate_option(&dplx, &opt, adapter);
}
- if ((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) {
+ if (AutoNeg[bd] != OPTION_UNSET && (speed != 0 || dplx != 0)) {
DPRINTK(PROBE, INFO,
"AutoNeg specified along with Speed or Duplex, "
"parameter ignored\n");
.p = an_list }}
};
- if (num_AutoNeg > bd) {
- an = AutoNeg[bd];
- e1000_validate_option(&an, &opt, adapter);
- } else {
- an = opt.def;
- }
+ an = AutoNeg[bd];
+ e1000_validate_option(&an, &opt, adapter);
adapter->hw.autoneg_advertised = an;
}
switch (speed + dplx) {
case 0:
adapter->hw.autoneg = adapter->fc_autoneg = 1;
- if ((num_Speed > bd) && (speed != 0 || dplx != 0))
+ if (Speed[bd] != OPTION_UNSET || Duplex[bd] != OPTION_UNSET)
DPRINTK(PROBE, INFO,
"Speed and duplex autonegotiation enabled\n");
break;
#define NVREG_RNDSEED_FORCE2 0x2d00
#define NVREG_RNDSEED_FORCE3 0x7400
- NvRegUnknownSetupReg1 = 0xA0,
-#define NVREG_UNKSETUP1_VAL 0x16070f
- NvRegUnknownSetupReg2 = 0xA4,
-#define NVREG_UNKSETUP2_VAL 0x16
+ NvRegTxDeferral = 0xA0,
+#define NVREG_TX_DEFERRAL_DEFAULT 0x15050f
+#define NVREG_TX_DEFERRAL_RGMII_10_100 0x16070f
+#define NVREG_TX_DEFERRAL_RGMII_1000 0x14050f
+ NvRegRxDeferral = 0xA4,
+#define NVREG_RX_DEFERRAL_DEFAULT 0x16
NvRegMacAddrA = 0xA8,
NvRegMacAddrB = 0xAC,
NvRegMulticastAddrA = 0xB0,
#define NVREG_LINKSPEED_MASK (0xFFF)
NvRegUnknownSetupReg5 = 0x130,
#define NVREG_UNKSETUP5_BIT31 (1<<31)
- NvRegUnknownSetupReg3 = 0x13c,
-#define NVREG_UNKSETUP3_VAL1 0x200010
+ NvRegTxWatermark = 0x13c,
+#define NVREG_TX_WM_DESC1_DEFAULT 0x0200010
+#define NVREG_TX_WM_DESC2_3_DEFAULT 0x1e08000
+#define NVREG_TX_WM_DESC2_3_1000 0xfe08000
NvRegTxRxControl = 0x144,
#define NVREG_TXRXCTL_KICK 0x0001
#define NVREG_TXRXCTL_BIT1 0x0002
{ NvRegMisc1, 0x03c },
{ NvRegOffloadConfig, 0x03ff },
{ NvRegMulticastAddrA, 0xffffffff },
- { NvRegUnknownSetupReg3, 0x0ff },
+ { NvRegTxWatermark, 0x0ff },
{ NvRegWakeUpFlags, 0x07777 },
{ 0,0 }
};
np->tx_skbuff[nr] = skb;
#ifdef NETIF_F_TSO
- if (skb_shinfo(skb)->gso_size)
+ if (skb_is_gso(skb))
tx_flags_extra = NV_TX2_TSO | (skb_shinfo(skb)->gso_size << NV_TX2_TSO_SHIFT);
else
#endif
int newdup = np->duplex;
int mii_status;
int retval = 0;
- u32 control_1000, status_1000, phyreg, pause_flags;
+ u32 control_1000, status_1000, phyreg, pause_flags, txreg;
/* BMSR_LSTATUS is latched, read it twice:
* we want the current value.
phyreg |= PHY_1000;
writel(phyreg, base + NvRegPhyInterface);
+ if (phyreg & PHY_RGMII) {
+ if ((np->linkspeed & NVREG_LINKSPEED_MASK) == NVREG_LINKSPEED_1000)
+ txreg = NVREG_TX_DEFERRAL_RGMII_1000;
+ else
+ txreg = NVREG_TX_DEFERRAL_RGMII_10_100;
+ } else {
+ txreg = NVREG_TX_DEFERRAL_DEFAULT;
+ }
+ writel(txreg, base + NvRegTxDeferral);
+
+ if (np->desc_ver == DESC_VER_1) {
+ txreg = NVREG_TX_WM_DESC1_DEFAULT;
+ } else {
+ if ((np->linkspeed & NVREG_LINKSPEED_MASK) == NVREG_LINKSPEED_1000)
+ txreg = NVREG_TX_WM_DESC2_3_1000;
+ else
+ txreg = NVREG_TX_WM_DESC2_3_DEFAULT;
+ }
+ writel(txreg, base + NvRegTxWatermark);
+
writel(NVREG_MISC1_FORCE | ( np->duplex ? 0 : NVREG_MISC1_HD),
base + NvRegMisc1);
pci_push(base);
/* 5) continue setup */
writel(np->linkspeed, base + NvRegLinkSpeed);
- writel(NVREG_UNKSETUP3_VAL1, base + NvRegUnknownSetupReg3);
+ if (np->desc_ver == DESC_VER_1)
+ writel(NVREG_TX_WM_DESC1_DEFAULT, base + NvRegTxWatermark);
+ else
+ writel(NVREG_TX_WM_DESC2_3_DEFAULT, base + NvRegTxWatermark);
writel(np->txrxctl_bits, base + NvRegTxRxControl);
writel(np->vlanctl_bits, base + NvRegVlanControl);
pci_push(base);
writel(readl(base + NvRegReceiverStatus), base + NvRegReceiverStatus);
get_random_bytes(&i, sizeof(i));
writel(NVREG_RNDSEED_FORCE | (i&NVREG_RNDSEED_MASK), base + NvRegRandomSeed);
- writel(NVREG_UNKSETUP1_VAL, base + NvRegUnknownSetupReg1);
- writel(NVREG_UNKSETUP2_VAL, base + NvRegUnknownSetupReg2);
+ writel(NVREG_TX_DEFERRAL_DEFAULT, base + NvRegTxDeferral);
+ writel(NVREG_RX_DEFERRAL_DEFAULT, base + NvRegRxDeferral);
if (poll_interval == -1) {
if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT)
writel(NVREG_POLL_DEFAULT_THROUGHPUT, base + NvRegPollingInterval);
static LIST_HEAD(bpq_devices);
+/*
+ * bpqether network devices are paired with ethernet devices below them, so
+ * form a special "super class" of normal ethernet devices; split their locks
+ * off into a separate class since they always nest.
+ */
+static struct lock_class_key bpq_netdev_xmit_lock_key;
/* ------------------------------------------------------------------------ */
err = register_netdevice(ndev);
if (err)
goto error;
+ lockdep_set_class(&ndev->_xmit_lock, &bpq_netdev_xmit_lock_key);
/* List protected by RTNL */
list_add_rcu(&bpq->bpq_list, &bpq_devices);
{
ali_chip_t *chip;
chipio_t info;
- int ret = -ENODEV;
+ int ret;
int cfg, cfg_base;
int reg, revision;
int i = 0;
return ret;
}
+ ret = -ENODEV;
/* Probe for all the ALi chipsets we know about */
for (chip= chips; chip->name; chip++, i++)
#ifdef CONFIG_PCI
#define PCIID_VENDOR_INTEL 0x8086
#define PCIID_VENDOR_ALI 0x10b9
-static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __devinitdata = {
+static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = {
{
.vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
.device = 0x24cc,
uint16_t ipcse, tucse, mss;
int err;
- if(likely(skb_shinfo(skb)->gso_size)) {
+ if (likely(skb_is_gso(skb))) {
if (skb_header_cloned(skb)) {
err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
if (err)
while(len) {
buffer_info = &tx_ring->buffer_info[i];
- size = min(len, IXGB_MAX_JUMBO_FRAME_SIZE);
+ size = min(len, IXGB_MAX_DATA_PER_TXD);
buffer_info->length = size;
buffer_info->dma =
pci_map_single(adapter->pdev,
while(len) {
buffer_info = &tx_ring->buffer_info[i];
- size = min(len, IXGB_MAX_JUMBO_FRAME_SIZE);
+ size = min(len, IXGB_MAX_DATA_PER_TXD);
buffer_info->length = size;
buffer_info->dma =
pci_map_page(adapter->pdev,
#endif
#ifdef LOOPBACK_TSO
- if (skb_shinfo(skb)->gso_size) {
+ if (skb_is_gso(skb)) {
BUG_ON(skb->protocol != htons(ETH_P_IP));
BUG_ON(skb->nh.iph->protocol != IPPROTO_TCP);
}
idx = (idx + 1) & tx->mask;
} while (idx != last_idx);
- if (skb_shinfo(skb)->gso_size) {
+ if (skb_is_gso(skb)) {
printk(KERN_ERR
"myri10ge: %s: TSO but wanted to linearize?!?!?\n",
mgp->dev->name);
return -EIO;
}
myri10ge_restore_state(mgp);
- pci_enable_device(pdev);
+
+ status = pci_enable_device(pdev);
+ if (status < 0) {
+ dev_err(&pdev->dev, "failed to enable device\n");
+ return -EIO;
+ }
+
pci_set_master(pdev);
status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
netdev->name, mgp);
if (status != 0) {
dev_err(&pdev->dev, "failed to allocate IRQ\n");
- goto abort_with_msi;
+ goto abort_with_enabled;
}
myri10ge_reset(mgp);
return 0;
-abort_with_msi:
+abort_with_enabled:
+ pci_disable_device(pdev);
return -EIO;
}
XENA_dev_config_t __iomem *bar0 = nic->bar0;
struct net_device *dev = nic->dev;
register u64 val64 = 0;
- u16 interruptible;
u16 subid, i;
mac_info_t *mac_control;
struct config_param *config;
return FAILURE;
}
- /* Enable select interrupts */
- if (nic->intr_type != INTA)
- en_dis_able_nic_intrs(nic, ENA_ALL_INTRS, DISABLE_INTRS);
- else {
- interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
- interruptible |= TX_PIC_INTR | RX_PIC_INTR;
- interruptible |= TX_MAC_INTR | RX_MAC_INTR;
- en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS);
- }
-
/*
* With some switches, link might be already up at this point.
* Because of this weird behavior, when we enable laser,
if (err) {
DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
dev->name);
- if (err == -ENODEV)
- goto hw_init_failed;
- else
- goto hw_enable_failed;
- }
-
- /* Store the values of the MSIX table in the nic_t structure */
- store_xmsi_data(sp);
-
- /* After proper initialization of H/W, register ISR */
- if (sp->intr_type == MSI) {
- err = request_irq((int) sp->pdev->irq, s2io_msi_handle,
- IRQF_SHARED, sp->name, dev);
- if (err) {
- DBG_PRINT(ERR_DBG, "%s: MSI registration \
-failed\n", dev->name);
- goto isr_registration_failed;
- }
- }
- if (sp->intr_type == MSI_X) {
- int i;
-
- for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
- if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) {
- sprintf(sp->desc1, "%s:MSI-X-%d-TX",
- dev->name, i);
- err = request_irq(sp->entries[i].vector,
- s2io_msix_fifo_handle, 0, sp->desc1,
- sp->s2io_entries[i].arg);
- DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc1,
- (unsigned long long)sp->msix_info[i].addr);
- } else {
- sprintf(sp->desc2, "%s:MSI-X-%d-RX",
- dev->name, i);
- err = request_irq(sp->entries[i].vector,
- s2io_msix_ring_handle, 0, sp->desc2,
- sp->s2io_entries[i].arg);
- DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc2,
- (unsigned long long)sp->msix_info[i].addr);
- }
- if (err) {
- DBG_PRINT(ERR_DBG, "%s: MSI-X-%d registration \
-failed\n", dev->name, i);
- DBG_PRINT(ERR_DBG, "Returned: %d\n", err);
- goto isr_registration_failed;
- }
- sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS;
- }
- }
- if (sp->intr_type == INTA) {
- err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED,
- sp->name, dev);
- if (err) {
- DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
- dev->name);
- goto isr_registration_failed;
- }
+ goto hw_init_failed;
}
if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) {
DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");
+ s2io_card_down(sp);
err = -ENODEV;
- goto setting_mac_address_failed;
+ goto hw_init_failed;
}
netif_start_queue(dev);
return 0;
-setting_mac_address_failed:
- if (sp->intr_type != MSI_X)
- free_irq(sp->pdev->irq, dev);
-isr_registration_failed:
- del_timer_sync(&sp->alarm_timer);
- if (sp->intr_type == MSI_X) {
- int i;
- u16 msi_control; /* Temp variable */
-
- for (i=1; (sp->s2io_entries[i].in_use ==
- MSIX_REGISTERED_SUCCESS); i++) {
- int vector = sp->entries[i].vector;
- void *arg = sp->s2io_entries[i].arg;
-
- free_irq(vector, arg);
- }
- pci_disable_msix(sp->pdev);
-
- /* Temp */
- pci_read_config_word(sp->pdev, 0x42, &msi_control);
- msi_control &= 0xFFFE; /* Disable MSI */
- pci_write_config_word(sp->pdev, 0x42, msi_control);
- }
- else if (sp->intr_type == MSI)
- pci_disable_msi(sp->pdev);
-hw_enable_failed:
- s2io_reset(sp);
hw_init_failed:
if (sp->intr_type == MSI_X) {
if (sp->entries)
flush_scheduled_work();
netif_stop_queue(dev);
/* Reset card, kill tasklet and free Tx and Rx buffers. */
- s2io_card_down(sp, 1);
+ s2io_card_down(sp);
sp->device_close_flag = TRUE; /* Device is shut down. */
return 0;
dev->mtu = new_mtu;
if (netif_running(dev)) {
- s2io_card_down(sp, 0);
+ s2io_card_down(sp);
netif_stop_queue(dev);
if (s2io_card_up(sp)) {
DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
}
-static void s2io_card_down(nic_t * sp, int flag)
+static int s2io_add_isr(nic_t * sp)
{
- int cnt = 0;
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
- unsigned long flags;
- register u64 val64 = 0;
+ int ret = 0;
struct net_device *dev = sp->dev;
+ int err = 0;
- del_timer_sync(&sp->alarm_timer);
- /* If s2io_set_link task is executing, wait till it completes. */
- while (test_and_set_bit(0, &(sp->link_state))) {
- msleep(50);
+ if (sp->intr_type == MSI)
+ ret = s2io_enable_msi(sp);
+ else if (sp->intr_type == MSI_X)
+ ret = s2io_enable_msi_x(sp);
+ if (ret) {
+ DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
+ sp->intr_type = INTA;
}
- atomic_set(&sp->card_state, CARD_DOWN);
- /* disable Tx and Rx traffic on the NIC */
- stop_nic(sp);
- if (flag) {
- if (sp->intr_type == MSI_X) {
- int i;
- u16 msi_control;
+ /* Store the values of the MSIX table in the nic_t structure */
+ store_xmsi_data(sp);
- for (i=1; (sp->s2io_entries[i].in_use ==
- MSIX_REGISTERED_SUCCESS); i++) {
- int vector = sp->entries[i].vector;
- void *arg = sp->s2io_entries[i].arg;
+ /* After proper initialization of H/W, register ISR */
+ if (sp->intr_type == MSI) {
+ err = request_irq((int) sp->pdev->irq, s2io_msi_handle,
+ IRQF_SHARED, sp->name, dev);
+ if (err) {
+ pci_disable_msi(sp->pdev);
+ DBG_PRINT(ERR_DBG, "%s: MSI registration failed\n",
+ dev->name);
+ return -1;
+ }
+ }
+ if (sp->intr_type == MSI_X) {
+ int i;
- free_irq(vector, arg);
+ for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
+ if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) {
+ sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
+ dev->name, i);
+ err = request_irq(sp->entries[i].vector,
+ s2io_msix_fifo_handle, 0, sp->desc[i],
+ sp->s2io_entries[i].arg);
+ DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc[i],
+ (unsigned long long)sp->msix_info[i].addr);
+ } else {
+ sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
+ dev->name, i);
+ err = request_irq(sp->entries[i].vector,
+ s2io_msix_ring_handle, 0, sp->desc[i],
+ sp->s2io_entries[i].arg);
+ DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc[i],
+ (unsigned long long)sp->msix_info[i].addr);
}
- pci_read_config_word(sp->pdev, 0x42, &msi_control);
- msi_control &= 0xFFFE; /* Disable MSI */
- pci_write_config_word(sp->pdev, 0x42, msi_control);
- pci_disable_msix(sp->pdev);
- } else {
- free_irq(sp->pdev->irq, dev);
- if (sp->intr_type == MSI)
- pci_disable_msi(sp->pdev);
+ if (err) {
+ DBG_PRINT(ERR_DBG,"%s:MSI-X-%d registration "
+ "failed\n", dev->name, i);
+ DBG_PRINT(ERR_DBG, "Returned: %d\n", err);
+ return -1;
+ }
+ sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS;
+ }
+ }
+ if (sp->intr_type == INTA) {
+ err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED,
+ sp->name, dev);
+ if (err) {
+ DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
+ dev->name);
+ return -1;
+ }
+ }
+ return 0;
+}
+static void s2io_rem_isr(nic_t * sp)
+{
+ int cnt = 0;
+ struct net_device *dev = sp->dev;
+
+ if (sp->intr_type == MSI_X) {
+ int i;
+ u16 msi_control;
+
+ for (i=1; (sp->s2io_entries[i].in_use ==
+ MSIX_REGISTERED_SUCCESS); i++) {
+ int vector = sp->entries[i].vector;
+ void *arg = sp->s2io_entries[i].arg;
+
+ free_irq(vector, arg);
+ }
+ pci_read_config_word(sp->pdev, 0x42, &msi_control);
+ msi_control &= 0xFFFE; /* Disable MSI */
+ pci_write_config_word(sp->pdev, 0x42, msi_control);
+
+ pci_disable_msix(sp->pdev);
+ } else {
+ free_irq(sp->pdev->irq, dev);
+ if (sp->intr_type == MSI) {
+ u16 val;
+
+ pci_disable_msi(sp->pdev);
+ pci_read_config_word(sp->pdev, 0x4c, &val);
+ val ^= 0x1;
+ pci_write_config_word(sp->pdev, 0x4c, val);
}
}
/* Waiting till all Interrupt handlers are complete */
break;
cnt++;
} while(cnt < 5);
+}
+
+static void s2io_card_down(nic_t * sp)
+{
+ int cnt = 0;
+ XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ unsigned long flags;
+ register u64 val64 = 0;
+
+ del_timer_sync(&sp->alarm_timer);
+ /* If s2io_set_link task is executing, wait till it completes. */
+ while (test_and_set_bit(0, &(sp->link_state))) {
+ msleep(50);
+ }
+ atomic_set(&sp->card_state, CARD_DOWN);
+
+ /* disable Tx and Rx traffic on the NIC */
+ stop_nic(sp);
+
+ s2io_rem_isr(sp);
/* Kill tasklet. */
tasklet_kill(&sp->task);
mac_info_t *mac_control;
struct config_param *config;
struct net_device *dev = (struct net_device *) sp->dev;
+ u16 interruptible;
/* Initialize the H/W I/O registers */
if (init_nic(sp) != 0) {
DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
dev->name);
+ s2io_reset(sp);
return -ENODEV;
}
- if (sp->intr_type == MSI)
- ret = s2io_enable_msi(sp);
- else if (sp->intr_type == MSI_X)
- ret = s2io_enable_msi_x(sp);
- if (ret) {
- DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
- sp->intr_type = INTA;
- }
-
/*
* Initializing the Rx buffers. For now we are considering only 1
* Rx ring and initializing buffers into 30 Rx blocks
sp->lro_max_aggr_per_sess = lro_max_pkts;
}
- /* Enable tasklet for the device */
- tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev);
-
/* Enable Rx Traffic and interrupts on the NIC */
if (start_nic(sp)) {
DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);
- tasklet_kill(&sp->task);
s2io_reset(sp);
- free_irq(dev->irq, dev);
+ free_rx_buffers(sp);
+ return -ENODEV;
+ }
+
+ /* Add interrupt service routine */
+ if (s2io_add_isr(sp) != 0) {
+ if (sp->intr_type == MSI_X)
+ s2io_rem_isr(sp);
+ s2io_reset(sp);
free_rx_buffers(sp);
return -ENODEV;
}
S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2));
+ /* Enable tasklet for the device */
+ tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev);
+
+ /* Enable select interrupts */
+ if (sp->intr_type != INTA)
+ en_dis_able_nic_intrs(sp, ENA_ALL_INTRS, DISABLE_INTRS);
+ else {
+ interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
+ interruptible |= TX_PIC_INTR | RX_PIC_INTR;
+ interruptible |= TX_MAC_INTR | RX_MAC_INTR;
+ en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS);
+ }
+
+
atomic_set(&sp->card_state, CARD_UP);
return 0;
}
struct net_device *dev = (struct net_device *) data;
nic_t *sp = dev->priv;
- s2io_card_down(sp, 0);
+ s2io_card_down(sp);
if (s2io_card_up(sp)) {
DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
dev->name);
#define MSIX_FLG 0xA5
struct msix_entry *entries;
struct s2io_msix_entry *s2io_entries;
- char desc1[35];
- char desc2[35];
+ char desc[MAX_REQUESTED_MSI_X][25];
int avail_msix_vectors; /* No. of MSI-X vectors granted by system */
static struct ethtool_ops netdev_ethtool_ops;
static void s2io_set_link(unsigned long data);
static int s2io_set_swapper(nic_t * sp);
-static void s2io_card_down(nic_t *nic, int flag);
+static void s2io_card_down(nic_t *nic);
static int s2io_card_up(nic_t *nic);
static int get_xena_rev_id(struct pci_dev *pdev);
static void restore_xmsi_data(nic_t *nic);
#define GM_TXCR_FORCE_JAM (1<<15) /* Bit 15: Force Jam / Flow-Control */
#define GM_TXCR_CRC_DIS (1<<14) /* Bit 14: Disable insertion of CRC */
#define GM_TXCR_PAD_DIS (1<<13) /* Bit 13: Disable padding of packets */
-#define GM_TXCR_COL_THR_MSK (1<<10) /* Bit 12..10: Collision Threshold */
+#define GM_TXCR_COL_THR_MSK (7<<10) /* Bit 12..10: Collision Threshold */
#define TX_COL_THR(x) (SHIFT10(x) & GM_TXCR_COL_THR_MSK)
GM_TXCR_FORCE_JAM = 1<<15, /* Bit 15: Force Jam / Flow-Control */
GM_TXCR_CRC_DIS = 1<<14, /* Bit 14: Disable insertion of CRC */
GM_TXCR_PAD_DIS = 1<<13, /* Bit 13: Disable padding of packets */
- GM_TXCR_COL_THR_MSK = 1<<10, /* Bit 12..10: Collision Threshold */
+ GM_TXCR_COL_THR_MSK = 7<<10, /* Bit 12..10: Collision Threshold */
};
#define TX_COL_THR(x) (((x)<<10) & GM_TXCR_COL_THR_MSK)
-#define TX_COL_DEF 0x04
+#define TX_COL_DEF 0x04 /* late collision after 64 byte */
/* GM_RX_CTRL 16 bit r/w Receive Control Register */
enum {
#include "sky2.h"
#define DRV_NAME "sky2"
-#define DRV_VERSION "1.4"
+#define DRV_VERSION "1.5"
#define PFX DRV_NAME " "
/*
#define RX_MAX_PENDING (RX_LE_SIZE/2 - 2)
#define RX_DEF_PENDING RX_MAX_PENDING
#define RX_SKB_ALIGN 8
+#define RX_BUF_WRITE 16
#define TX_RING_SIZE 512
#define TX_DEF_PENDING (TX_RING_SIZE - 1)
}
if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
- sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON);
sky2_pci_write32(hw, PCI_DEV_REG3, 0);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
reg1 &= P_ASPM_CONTROL_MSK;
}
sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+ udelay(100);
break;
else
reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+ udelay(100);
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
count = sizeof(dma_addr_t) / sizeof(u32);
count += skb_shinfo(skb)->nr_frags * count;
- if (skb_shinfo(skb)->gso_size)
+ if (skb_is_gso(skb))
++count;
if (skb->ip_summed == CHECKSUM_HW)
}
sky2->tx_cons = put;
- if (tx_avail(sky2) > MAX_SKB_TX_LE)
+ if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
netif_wake_queue(dev);
}
re->skb->ip_summed = CHECKSUM_NONE;
sky2_rx_add(sky2, re->mapaddr);
- /* Tell receiver about new buffers. */
- sky2_put_idx(sky2->hw, rxqaddr[sky2->port], sky2->rx_put);
-
return skb;
oversize:
/* Process status response ring */
static int sky2_status_intr(struct sky2_hw *hw, int to_do)
{
+ struct sky2_port *sky2;
int work_done = 0;
+ unsigned buf_write[2] = { 0, 0 };
u16 hwidx = sky2_read16(hw, STAT_PUT_IDX);
rmb();
while (hw->st_idx != hwidx) {
struct sky2_status_le *le = hw->st_le + hw->st_idx;
struct net_device *dev;
- struct sky2_port *sky2;
struct sk_buff *skb;
u32 status;
u16 length;
#endif
netif_receive_skb(skb);
+ /* Update receiver after 16 frames */
+ if (++buf_write[le->link] == RX_BUF_WRITE) {
+ sky2_put_idx(hw, rxqaddr[le->link],
+ sky2->rx_put);
+ buf_write[le->link] = 0;
+ }
+
+ /* Stop after net poll weight */
if (++work_done >= to_do)
goto exit_loop;
break;
}
exit_loop:
+ if (buf_write[0]) {
+ sky2 = netdev_priv(hw->dev[0]);
+ sky2_put_idx(hw, Q_R1, sky2->rx_put);
+ }
+
+ if (buf_write[1]) {
+ sky2 = netdev_priv(hw->dev[1]);
+ sky2_put_idx(hw, Q_R2, sky2->rx_put);
+ }
+
return work_done;
}
int work_done = 0;
u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
- if (!~status)
- goto out;
-
if (status & Y2_IS_HW_ERR)
sky2_hw_intr(hw);
if (sky2_more_work(hw))
return 1;
-out:
+
netif_rx_complete(dev0);
sky2_read32(hw, B0_Y2_SP_LISR);
}
-static int __devinit sky2_reset(struct sky2_hw *hw)
+static int sky2_reset(struct sky2_hw *hw)
{
u16 status;
u8 t8, pmd_type;
return -EINVAL;
del_timer_sync(&hw->idle_timer);
+ netif_poll_disable(hw->dev[0]);
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
- if (dev) {
- if (!netif_running(dev))
- continue;
-
+ if (netif_running(dev)) {
sky2_down(dev);
netif_device_detach(dev);
- netif_poll_disable(dev);
}
}
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
- if (dev && netif_running(dev)) {
+ if (netif_running(dev)) {
netif_device_attach(dev);
- netif_poll_enable(dev);
err = sky2_up(dev);
if (err) {
}
}
+ netif_poll_enable(hw->dev[0]);
sky2_idle_start(hw);
out:
return err;
GM_TXCR_FORCE_JAM = 1<<15, /* Bit 15: Force Jam / Flow-Control */
GM_TXCR_CRC_DIS = 1<<14, /* Bit 14: Disable insertion of CRC */
GM_TXCR_PAD_DIS = 1<<13, /* Bit 13: Disable padding of packets */
- GM_TXCR_COL_THR_MSK = 1<<10, /* Bit 12..10: Collision Threshold */
+ GM_TXCR_COL_THR_MSK = 7<<10, /* Bit 12..10: Collision Threshold */
};
#define TX_COL_THR(x) (((x)<<10) & GM_TXCR_COL_THR_MSK)
#define SMC_IRQ_FLAGS (0)
+#elif defined(CONFIG_ARCH_VERSATILE)
+
+#define SMC_CAN_USE_8BIT 1
+#define SMC_CAN_USE_16BIT 1
+#define SMC_CAN_USE_32BIT 1
+#define SMC_NOWAIT 1
+
+#define SMC_inb(a, r) readb((a) + (r))
+#define SMC_inw(a, r) readw((a) + (r))
+#define SMC_inl(a, r) readl((a) + (r))
+#define SMC_outb(v, a, r) writeb(v, (a) + (r))
+#define SMC_outw(v, a, r) writew(v, (a) + (r))
+#define SMC_outl(v, a, r) writel(v, (a) + (r))
+#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
+#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
+
+#define SMC_IRQ_FLAGS (0)
+
#else
#define SMC_CAN_USE_8BIT 1
*
* returns the content of the specified SMMIO register.
*/
-static u32
+static inline u32
spider_net_read_reg(struct spider_net_card *card, u32 reg)
{
u32 value;
* @reg: register to write to
* @value: value to write into the specified SMMIO register
*/
-static void
+static inline void
spider_net_write_reg(struct spider_net_card *card, u32 reg, u32 value)
{
value = cpu_to_le32(value);
*
* returns the status as in the dmac_cmd_status field of the descriptor
*/
-static enum spider_net_descr_status
+static inline int
spider_net_get_descr_status(struct spider_net_descr *descr)
{
- u32 cmd_status;
-
- cmd_status = descr->dmac_cmd_status;
- cmd_status >>= SPIDER_NET_DESCR_IND_PROC_SHIFT;
- /* no need to mask out any bits, as cmd_status is 32 bits wide only
- * (and unsigned) */
- return cmd_status;
-}
-
-/**
- * spider_net_set_descr_status -- sets the status of a descriptor
- * @descr: descriptor to change
- * @status: status to set in the descriptor
- *
- * changes the status to the specified value. Doesn't change other bits
- * in the status
- */
-static void
-spider_net_set_descr_status(struct spider_net_descr *descr,
- enum spider_net_descr_status status)
-{
- u32 cmd_status;
- /* read the status */
- cmd_status = descr->dmac_cmd_status;
- /* clean the upper 4 bits */
- cmd_status &= SPIDER_NET_DESCR_IND_PROC_MASKO;
- /* add the status to it */
- cmd_status |= ((u32)status)<<SPIDER_NET_DESCR_IND_PROC_SHIFT;
- /* and write it back */
- descr->dmac_cmd_status = cmd_status;
+ return descr->dmac_cmd_status & SPIDER_NET_DESCR_IND_PROC_MASK;
}
/**
static int
spider_net_init_chain(struct spider_net_card *card,
struct spider_net_descr_chain *chain,
- struct spider_net_descr *start_descr, int no)
+ struct spider_net_descr *start_descr,
+ int direction, int no)
{
int i;
struct spider_net_descr *descr;
dma_addr_t buf;
- atomic_set(&card->rx_chain_refill,0);
-
descr = start_descr;
memset(descr, 0, sizeof(*descr) * no);
/* set up the hardware pointers in each descriptor */
for (i=0; i<no; i++, descr++) {
- spider_net_set_descr_status(descr, SPIDER_NET_DESCR_NOT_IN_USE);
+ descr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
buf = pci_map_single(card->pdev, descr,
SPIDER_NET_DESCR_SIZE,
- PCI_DMA_BIDIRECTIONAL);
+ direction);
if (buf == DMA_ERROR_CODE)
goto iommu_error;
start_descr->prev = descr-1;
descr = start_descr;
- for (i=0; i < no; i++, descr++) {
- descr->next_descr_addr = descr->next->bus_addr;
- }
+ if (direction == PCI_DMA_FROMDEVICE)
+ for (i=0; i < no; i++, descr++)
+ descr->next_descr_addr = descr->next->bus_addr;
+ spin_lock_init(&chain->lock);
chain->head = start_descr;
chain->tail = start_descr;
if (descr->bus_addr)
pci_unmap_single(card->pdev, descr->bus_addr,
SPIDER_NET_DESCR_SIZE,
- PCI_DMA_BIDIRECTIONAL);
+ direction);
return -ENOMEM;
}
dev_kfree_skb(descr->skb);
pci_unmap_single(card->pdev, descr->buf_addr,
SPIDER_NET_MAX_FRAME,
- PCI_DMA_BIDIRECTIONAL);
+ PCI_DMA_FROMDEVICE);
}
descr = descr->next;
}
skb_reserve(descr->skb, SPIDER_NET_RXBUF_ALIGN - offset);
/* io-mmu-map the skb */
buf = pci_map_single(card->pdev, descr->skb->data,
- SPIDER_NET_MAX_FRAME, PCI_DMA_BIDIRECTIONAL);
+ SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
descr->buf_addr = buf;
if (buf == DMA_ERROR_CODE) {
dev_kfree_skb_any(descr->skb);
if (netif_msg_rx_err(card) && net_ratelimit())
pr_err("Could not iommu-map rx buffer\n");
- spider_net_set_descr_status(descr, SPIDER_NET_DESCR_NOT_IN_USE);
+ descr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
} else {
- descr->dmac_cmd_status = SPIDER_NET_DMAC_RX_CARDOWNED;
+ descr->dmac_cmd_status = SPIDER_NET_DESCR_CARDOWNED |
+ SPIDER_NET_DMAC_NOINTR_COMPLETE;
}
return error;
* chip by writing to the appropriate register. DMA is enabled in
* spider_net_enable_rxdmac.
*/
-static void
+static inline void
spider_net_enable_rxchtails(struct spider_net_card *card)
{
/* assume chain is aligned correctly */
* spider_net_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
* in the GDADMACCNTR register
*/
-static void
+static inline void
spider_net_enable_rxdmac(struct spider_net_card *card)
{
wmb();
static void
spider_net_refill_rx_chain(struct spider_net_card *card)
{
- struct spider_net_descr_chain *chain;
-
- chain = &card->rx_chain;
+ struct spider_net_descr_chain *chain = &card->rx_chain;
+ unsigned long flags;
/* one context doing the refill (and a second context seeing that
* and omitting it) is ok. If called by NAPI, we'll be called again
* as spider_net_decode_one_descr is called several times. If some
* interrupt calls us, the NAPI is about to clean up anyway. */
- if (atomic_inc_return(&card->rx_chain_refill) == 1)
- while (spider_net_get_descr_status(chain->head) ==
- SPIDER_NET_DESCR_NOT_IN_USE) {
- if (spider_net_prepare_rx_descr(card, chain->head))
- break;
- chain->head = chain->head->next;
- }
+ if (!spin_trylock_irqsave(&chain->lock, flags))
+ return;
+
+ while (spider_net_get_descr_status(chain->head) ==
+ SPIDER_NET_DESCR_NOT_IN_USE) {
+ if (spider_net_prepare_rx_descr(card, chain->head))
+ break;
+ chain->head = chain->head->next;
+ }
- atomic_dec(&card->rx_chain_refill);
+ spin_unlock_irqrestore(&chain->lock, flags);
}
/**
return result;
}
-/**
- * spider_net_release_tx_descr - processes a used tx descriptor
- * @card: card structure
- * @descr: descriptor to release
- *
- * releases a used tx descriptor (unmapping, freeing of skb)
- */
-static void
-spider_net_release_tx_descr(struct spider_net_card *card,
- struct spider_net_descr *descr)
-{
- struct sk_buff *skb;
-
- /* unmap the skb */
- skb = descr->skb;
- pci_unmap_single(card->pdev, descr->buf_addr, skb->len,
- PCI_DMA_BIDIRECTIONAL);
-
- dev_kfree_skb_any(skb);
-
- /* set status to not used */
- spider_net_set_descr_status(descr, SPIDER_NET_DESCR_NOT_IN_USE);
-}
-
-/**
- * spider_net_release_tx_chain - processes sent tx descriptors
- * @card: adapter structure
- * @brutal: if set, don't care about whether descriptor seems to be in use
- *
- * returns 0 if the tx ring is empty, otherwise 1.
- *
- * spider_net_release_tx_chain releases the tx descriptors that spider has
- * finished with (if non-brutal) or simply release tx descriptors (if brutal).
- * If some other context is calling this function, we return 1 so that we're
- * scheduled again (if we were scheduled) and will not loose initiative.
- */
-static int
-spider_net_release_tx_chain(struct spider_net_card *card, int brutal)
-{
- struct spider_net_descr_chain *tx_chain = &card->tx_chain;
- enum spider_net_descr_status status;
-
- if (atomic_inc_return(&card->tx_chain_release) != 1) {
- atomic_dec(&card->tx_chain_release);
- return 1;
- }
-
- for (;;) {
- status = spider_net_get_descr_status(tx_chain->tail);
- switch (status) {
- case SPIDER_NET_DESCR_CARDOWNED:
- if (!brutal)
- goto out;
- /* fallthrough, if we release the descriptors
- * brutally (then we don't care about
- * SPIDER_NET_DESCR_CARDOWNED) */
- case SPIDER_NET_DESCR_RESPONSE_ERROR:
- case SPIDER_NET_DESCR_PROTECTION_ERROR:
- case SPIDER_NET_DESCR_FORCE_END:
- if (netif_msg_tx_err(card))
- pr_err("%s: forcing end of tx descriptor "
- "with status x%02x\n",
- card->netdev->name, status);
- card->netdev_stats.tx_dropped++;
- break;
-
- case SPIDER_NET_DESCR_COMPLETE:
- card->netdev_stats.tx_packets++;
- card->netdev_stats.tx_bytes +=
- tx_chain->tail->skb->len;
- break;
-
- default: /* any other value (== SPIDER_NET_DESCR_NOT_IN_USE) */
- goto out;
- }
- spider_net_release_tx_descr(card, tx_chain->tail);
- tx_chain->tail = tx_chain->tail->next;
- }
-out:
- atomic_dec(&card->tx_chain_release);
-
- netif_wake_queue(card->netdev);
-
- if (status == SPIDER_NET_DESCR_CARDOWNED)
- return 1;
- return 0;
-}
-
-/**
- * spider_net_cleanup_tx_ring - cleans up the TX ring
- * @card: card structure
- *
- * spider_net_cleanup_tx_ring is called by the tx_timer (as we don't use
- * interrupts to cleanup our TX ring) and returns sent packets to the stack
- * by freeing them
- */
-static void
-spider_net_cleanup_tx_ring(struct spider_net_card *card)
-{
- if ( (spider_net_release_tx_chain(card, 0)) &&
- (card->netdev->flags & IFF_UP) ) {
- mod_timer(&card->tx_timer, jiffies + SPIDER_NET_TX_TIMER);
- }
-}
-
/**
* spider_net_get_multicast_hash - generates hash for multicast filter table
* @addr: multicast address
SPIDER_NET_DMA_RX_FEND_VALUE);
}
-/**
- * spider_net_stop - called upon ifconfig down
- * @netdev: interface device structure
- *
- * always returns 0
- */
-int
-spider_net_stop(struct net_device *netdev)
-{
- struct spider_net_card *card = netdev_priv(netdev);
-
- tasklet_kill(&card->rxram_full_tl);
- netif_poll_disable(netdev);
- netif_carrier_off(netdev);
- netif_stop_queue(netdev);
- del_timer_sync(&card->tx_timer);
-
- /* disable/mask all interrupts */
- spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0);
- spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 0);
- spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 0);
-
- /* free_irq(netdev->irq, netdev);*/
- free_irq(to_pci_dev(netdev->class_dev.dev)->irq, netdev);
-
- spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
- SPIDER_NET_DMA_TX_FEND_VALUE);
-
- /* turn off DMA, force end */
- spider_net_disable_rxdmac(card);
-
- /* release chains */
- spider_net_release_tx_chain(card, 1);
-
- spider_net_free_chain(card, &card->tx_chain);
- spider_net_free_chain(card, &card->rx_chain);
-
- return 0;
-}
-
-/**
- * spider_net_get_next_tx_descr - returns the next available tx descriptor
- * @card: device structure to get descriptor from
- *
- * returns the address of the next descriptor, or NULL if not available.
- */
-static struct spider_net_descr *
-spider_net_get_next_tx_descr(struct spider_net_card *card)
-{
- /* check, if head points to not-in-use descr */
- if ( spider_net_get_descr_status(card->tx_chain.head) ==
- SPIDER_NET_DESCR_NOT_IN_USE ) {
- return card->tx_chain.head;
- } else {
- return NULL;
- }
-}
-
-/**
- * spider_net_set_txdescr_cmdstat - sets the tx descriptor command field
- * @descr: descriptor structure to fill out
- * @skb: packet to consider
- *
- * fills out the command and status field of the descriptor structure,
- * depending on hardware checksum settings.
- */
-static void
-spider_net_set_txdescr_cmdstat(struct spider_net_descr *descr,
- struct sk_buff *skb)
-{
- /* make sure the other fields in the descriptor are written */
- wmb();
-
- if (skb->ip_summed != CHECKSUM_HW) {
- descr->dmac_cmd_status = SPIDER_NET_DMAC_CMDSTAT_NOCS;
- return;
- }
-
- /* is packet ip?
- * if yes: tcp? udp? */
- if (skb->protocol == htons(ETH_P_IP)) {
- if (skb->nh.iph->protocol == IPPROTO_TCP)
- descr->dmac_cmd_status = SPIDER_NET_DMAC_CMDSTAT_TCPCS;
- else if (skb->nh.iph->protocol == IPPROTO_UDP)
- descr->dmac_cmd_status = SPIDER_NET_DMAC_CMDSTAT_UDPCS;
- else /* the stack should checksum non-tcp and non-udp
- packets on his own: NETIF_F_IP_CSUM */
- descr->dmac_cmd_status = SPIDER_NET_DMAC_CMDSTAT_NOCS;
- }
-}
-
/**
* spider_net_prepare_tx_descr - fill tx descriptor with skb data
* @card: card structure
*/
static int
spider_net_prepare_tx_descr(struct spider_net_card *card,
- struct spider_net_descr *descr,
struct sk_buff *skb)
{
+ struct spider_net_descr *descr = card->tx_chain.head;
dma_addr_t buf;
- buf = pci_map_single(card->pdev, skb->data,
- skb->len, PCI_DMA_BIDIRECTIONAL);
+ buf = pci_map_single(card->pdev, skb->data, skb->len, PCI_DMA_TODEVICE);
if (buf == DMA_ERROR_CODE) {
if (netif_msg_tx_err(card) && net_ratelimit())
pr_err("could not iommu-map packet (%p, %i). "
descr->buf_addr = buf;
descr->buf_size = skb->len;
+ descr->next_descr_addr = 0;
descr->skb = skb;
descr->data_status = 0;
- spider_net_set_txdescr_cmdstat(descr,skb);
+ descr->dmac_cmd_status =
+ SPIDER_NET_DESCR_CARDOWNED | SPIDER_NET_DMAC_NOCS;
+ if (skb->protocol == htons(ETH_P_IP))
+ switch (skb->nh.iph->protocol) {
+ case IPPROTO_TCP:
+ descr->dmac_cmd_status |= SPIDER_NET_DMAC_TCP;
+ break;
+ case IPPROTO_UDP:
+ descr->dmac_cmd_status |= SPIDER_NET_DMAC_UDP;
+ break;
+ }
+
+ descr->prev->next_descr_addr = descr->bus_addr;
+
+ return 0;
+}
+
+/**
+ * spider_net_release_tx_descr - processes a used tx descriptor
+ * @card: card structure
+ * @descr: descriptor to release
+ *
+ * releases a used tx descriptor (unmapping, freeing of skb)
+ */
+static inline void
+spider_net_release_tx_descr(struct spider_net_card *card)
+{
+ struct spider_net_descr *descr = card->tx_chain.tail;
+ struct sk_buff *skb;
+
+ card->tx_chain.tail = card->tx_chain.tail->next;
+ descr->dmac_cmd_status |= SPIDER_NET_DESCR_NOT_IN_USE;
+
+ /* unmap the skb */
+ skb = descr->skb;
+ pci_unmap_single(card->pdev, descr->buf_addr, skb->len,
+ PCI_DMA_TODEVICE);
+ dev_kfree_skb_any(skb);
+}
+
+/**
+ * spider_net_release_tx_chain - processes sent tx descriptors
+ * @card: adapter structure
+ * @brutal: if set, don't care about whether descriptor seems to be in use
+ *
+ * returns 0 if the tx ring is empty, otherwise 1.
+ *
+ * spider_net_release_tx_chain releases the tx descriptors that spider has
+ * finished with (if non-brutal) or simply release tx descriptors (if brutal).
+ * If some other context is calling this function, we return 1 so that we're
+ * scheduled again (if we were scheduled) and will not loose initiative.
+ */
+static int
+spider_net_release_tx_chain(struct spider_net_card *card, int brutal)
+{
+ struct spider_net_descr_chain *chain = &card->tx_chain;
+ int status;
+
+ spider_net_read_reg(card, SPIDER_NET_GDTDMACCNTR);
+
+ while (chain->tail != chain->head) {
+ status = spider_net_get_descr_status(chain->tail);
+ switch (status) {
+ case SPIDER_NET_DESCR_COMPLETE:
+ card->netdev_stats.tx_packets++;
+ card->netdev_stats.tx_bytes += chain->tail->skb->len;
+ break;
+
+ case SPIDER_NET_DESCR_CARDOWNED:
+ if (!brutal)
+ return 1;
+ /* fallthrough, if we release the descriptors
+ * brutally (then we don't care about
+ * SPIDER_NET_DESCR_CARDOWNED) */
+
+ case SPIDER_NET_DESCR_RESPONSE_ERROR:
+ case SPIDER_NET_DESCR_PROTECTION_ERROR:
+ case SPIDER_NET_DESCR_FORCE_END:
+ if (netif_msg_tx_err(card))
+ pr_err("%s: forcing end of tx descriptor "
+ "with status x%02x\n",
+ card->netdev->name, status);
+ card->netdev_stats.tx_errors++;
+ break;
+
+ default:
+ card->netdev_stats.tx_dropped++;
+ return 1;
+ }
+ spider_net_release_tx_descr(card);
+ }
return 0;
}
* spider_net_kick_tx_dma writes the current tx chain head as start address
* of the tx descriptor chain and enables the transmission DMA engine
*/
-static void
-spider_net_kick_tx_dma(struct spider_net_card *card,
- struct spider_net_descr *descr)
+static inline void
+spider_net_kick_tx_dma(struct spider_net_card *card)
{
- /* this is the only descriptor in the output chain.
- * Enable TX DMA */
+ struct spider_net_descr *descr;
- spider_net_write_reg(card, SPIDER_NET_GDTDCHA,
- descr->bus_addr);
+ if (spider_net_read_reg(card, SPIDER_NET_GDTDMACCNTR) &
+ SPIDER_NET_TX_DMA_EN)
+ goto out;
- spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
- SPIDER_NET_DMA_TX_VALUE);
+ descr = card->tx_chain.tail;
+ for (;;) {
+ if (spider_net_get_descr_status(descr) ==
+ SPIDER_NET_DESCR_CARDOWNED) {
+ spider_net_write_reg(card, SPIDER_NET_GDTDCHA,
+ descr->bus_addr);
+ spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
+ SPIDER_NET_DMA_TX_VALUE);
+ break;
+ }
+ if (descr == card->tx_chain.head)
+ break;
+ descr = descr->next;
+ }
+
+out:
+ mod_timer(&card->tx_timer, jiffies + SPIDER_NET_TX_TIMER);
}
/**
* @skb: packet to send out
* @netdev: interface device structure
*
- * returns 0 on success, <0 on failure
+ * returns 0 on success, !0 on failure
*/
static int
spider_net_xmit(struct sk_buff *skb, struct net_device *netdev)
{
struct spider_net_card *card = netdev_priv(netdev);
- struct spider_net_descr *descr;
+ struct spider_net_descr_chain *chain = &card->tx_chain;
+ struct spider_net_descr *descr = chain->head;
+ unsigned long flags;
int result;
+ spin_lock_irqsave(&chain->lock, flags);
+
spider_net_release_tx_chain(card, 0);
- descr = spider_net_get_next_tx_descr(card);
+ if (chain->head->next == chain->tail->prev) {
+ card->netdev_stats.tx_dropped++;
+ result = NETDEV_TX_LOCKED;
+ goto out;
+ }
- if (!descr)
- goto error;
+ if (spider_net_get_descr_status(descr) != SPIDER_NET_DESCR_NOT_IN_USE) {
+ result = NETDEV_TX_LOCKED;
+ goto out;
+ }
- result = spider_net_prepare_tx_descr(card, descr, skb);
- if (result)
- goto error;
+ if (spider_net_prepare_tx_descr(card, skb) != 0) {
+ card->netdev_stats.tx_dropped++;
+ result = NETDEV_TX_BUSY;
+ goto out;
+ }
+
+ result = NETDEV_TX_OK;
+ spider_net_kick_tx_dma(card);
card->tx_chain.head = card->tx_chain.head->next;
- if (spider_net_get_descr_status(descr->prev) !=
- SPIDER_NET_DESCR_CARDOWNED) {
- /* make sure the current descriptor is in memory. Then
- * kicking it on again makes sense, if the previous is not
- * card-owned anymore. Check the previous descriptor twice
- * to omit an mb() in heavy traffic cases */
- mb();
- if (spider_net_get_descr_status(descr->prev) !=
- SPIDER_NET_DESCR_CARDOWNED)
- spider_net_kick_tx_dma(card, descr);
- }
+out:
+ spin_unlock_irqrestore(&chain->lock, flags);
+ netif_wake_queue(netdev);
+ return result;
+}
- mod_timer(&card->tx_timer, jiffies + SPIDER_NET_TX_TIMER);
+/**
+ * spider_net_cleanup_tx_ring - cleans up the TX ring
+ * @card: card structure
+ *
+ * spider_net_cleanup_tx_ring is called by the tx_timer (as we don't use
+ * interrupts to cleanup our TX ring) and returns sent packets to the stack
+ * by freeing them
+ */
+static void
+spider_net_cleanup_tx_ring(struct spider_net_card *card)
+{
+ unsigned long flags;
- return NETDEV_TX_OK;
+ spin_lock_irqsave(&card->tx_chain.lock, flags);
-error:
- card->netdev_stats.tx_dropped++;
- return NETDEV_TX_BUSY;
+ if ((spider_net_release_tx_chain(card, 0) != 0) &&
+ (card->netdev->flags & IFF_UP))
+ spider_net_kick_tx_dma(card);
+
+ spin_unlock_irqrestore(&card->tx_chain.lock, flags);
}
/**
/* unmap descriptor */
pci_unmap_single(card->pdev, descr->buf_addr, SPIDER_NET_MAX_FRAME,
- PCI_DMA_BIDIRECTIONAL);
+ PCI_DMA_FROMDEVICE);
/* the cases we'll throw away the packet immediately */
if (data_error & SPIDER_NET_DESTROY_RX_FLAGS) {
static int
spider_net_decode_one_descr(struct spider_net_card *card, int napi)
{
- enum spider_net_descr_status status;
- struct spider_net_descr *descr;
- struct spider_net_descr_chain *chain;
+ struct spider_net_descr_chain *chain = &card->rx_chain;
+ struct spider_net_descr *descr = chain->tail;
+ int status;
int result;
- chain = &card->rx_chain;
- descr = chain->tail;
-
status = spider_net_get_descr_status(descr);
if (status == SPIDER_NET_DESCR_CARDOWNED) {
card->netdev->name, status);
card->netdev_stats.rx_dropped++;
pci_unmap_single(card->pdev, descr->buf_addr,
- SPIDER_NET_MAX_FRAME, PCI_DMA_BIDIRECTIONAL);
+ SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
dev_kfree_skb_irq(descr->skb);
goto refill;
}
/* ok, we've got a packet in descr */
result = spider_net_pass_skb_up(descr, card, napi);
refill:
- spider_net_set_descr_status(descr, SPIDER_NET_DESCR_NOT_IN_USE);
+ descr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
/* change the descriptor state: */
if (!napi)
spider_net_refill_rx_chain(card);
return 0;
}
-/**
- * spider_net_enable_txdmac - enables a TX DMA controller
- * @card: card structure
- *
- * spider_net_enable_txdmac enables the TX DMA controller by setting the
- * descriptor chain tail address
- */
-static void
-spider_net_enable_txdmac(struct spider_net_card *card)
-{
- /* assume chain is aligned correctly */
- spider_net_write_reg(card, SPIDER_NET_GDTDCHA,
- card->tx_chain.tail->bus_addr);
-}
-
/**
* spider_net_handle_rxram_full - cleans up RX ring upon RX RAM full interrupt
* @card: card structure
{ SPIDER_NET_GMRWOLCTRL, 0 },
{ SPIDER_NET_GTESTMD, 0x10000000 },
{ SPIDER_NET_GTTQMSK, 0x00400040 },
- { SPIDER_NET_GTESTMD, 0 },
{ SPIDER_NET_GMACINTEN, 0 },
spider_net_write_reg(card, SPIDER_NET_GRXDMAEN, SPIDER_NET_WOL_VALUE);
- /* set chain tail adress for TX chain */
- spider_net_enable_txdmac(card);
-
spider_net_write_reg(card, SPIDER_NET_GMACLENLMT,
SPIDER_NET_LENLMT_VALUE);
spider_net_write_reg(card, SPIDER_NET_GMACMODE,
SPIDER_NET_INT1_MASK_VALUE);
spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK,
SPIDER_NET_INT2_MASK_VALUE);
+
+ spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
+ SPIDER_NET_GDTDCEIDIS);
}
/**
result = -ENOMEM;
if (spider_net_init_chain(card, &card->tx_chain,
- card->descr, tx_descriptors))
+ card->descr,
+ PCI_DMA_TODEVICE, tx_descriptors))
goto alloc_tx_failed;
if (spider_net_init_chain(card, &card->rx_chain,
- card->descr + tx_descriptors, rx_descriptors))
+ card->descr + tx_descriptors,
+ PCI_DMA_FROMDEVICE, rx_descriptors))
goto alloc_rx_failed;
/* allocate rx skbs */
/* empty sequencer data */
for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS;
sequencer++) {
- spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT +
+ spider_net_write_reg(card, SPIDER_NET_GSnPRGADR +
sequencer * 8, 0x0);
for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) {
spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT +
SPIDER_NET_CKRCTRL_STOP_VALUE);
}
+/**
+ * spider_net_stop - called upon ifconfig down
+ * @netdev: interface device structure
+ *
+ * always returns 0
+ */
+int
+spider_net_stop(struct net_device *netdev)
+{
+ struct spider_net_card *card = netdev_priv(netdev);
+
+ tasklet_kill(&card->rxram_full_tl);
+ netif_poll_disable(netdev);
+ netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
+ del_timer_sync(&card->tx_timer);
+
+ /* disable/mask all interrupts */
+ spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0);
+ spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 0);
+ spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 0);
+
+ /* free_irq(netdev->irq, netdev);*/
+ free_irq(to_pci_dev(netdev->class_dev.dev)->irq, netdev);
+
+ spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
+ SPIDER_NET_DMA_TX_FEND_VALUE);
+
+ /* turn off DMA, force end */
+ spider_net_disable_rxdmac(card);
+
+ /* release chains */
+ if (spin_trylock(&card->tx_chain.lock)) {
+ spider_net_release_tx_chain(card, 1);
+ spin_unlock(&card->tx_chain.lock);
+ }
+
+ spider_net_free_chain(card, &card->tx_chain);
+ spider_net_free_chain(card, &card->rx_chain);
+
+ return 0;
+}
+
/**
* spider_net_tx_timeout_task - task scheduled by the watchdog timeout
* function (to be called not under interrupt status)
goto out;
spider_net_open(netdev);
- spider_net_kick_tx_dma(card, card->tx_chain.head);
+ spider_net_kick_tx_dma(card);
netif_device_attach(netdev);
out:
pci_set_drvdata(card->pdev, netdev);
- atomic_set(&card->tx_chain_release,0);
card->rxram_full_tl.data = (unsigned long) card;
card->rxram_full_tl.func =
(void (*)(unsigned long)) spider_net_handle_rxram_full;
spider_net_setup_netdev_ops(netdev);
- netdev->features = NETIF_F_HW_CSUM;
+ netdev->features = NETIF_F_HW_CSUM | NETIF_F_LLTX;
/* some time: NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
* NETIF_F_HW_VLAN_FILTER */
#define SPIDER_NET_DMA_RX_VALUE 0x80000000
#define SPIDER_NET_DMA_RX_FEND_VALUE 0x00030003
/* to set TX_DMA_EN */
-#define SPIDER_NET_DMA_TX_VALUE 0x80000000
+#define SPIDER_NET_TX_DMA_EN 0x80000000
+#define SPIDER_NET_GDTDCEIDIS 0x00000002
+#define SPIDER_NET_DMA_TX_VALUE SPIDER_NET_TX_DMA_EN | \
+ SPIDER_NET_GDTDCEIDIS
#define SPIDER_NET_DMA_TX_FEND_VALUE 0x00030003
/* SPIDER_NET_UA_DESCR_VALUE is OR'ed with the unicast address */
(~SPIDER_NET_TXINT) & \
(~SPIDER_NET_RXINT) )
-#define SPIDER_NET_GPREXEC 0x80000000
-#define SPIDER_NET_GPRDAT_MASK 0x0000ffff
+#define SPIDER_NET_GPREXEC 0x80000000
+#define SPIDER_NET_GPRDAT_MASK 0x0000ffff
-/* descriptor bits
- *
- * 1010 descriptor ready
- * 0 descr in middle of chain
- * 000 fixed to 0
- *
- * 0 no interrupt on completion
- * 000 fixed to 0
- * 1 no ipsec processing
- * 1 last descriptor for this frame
- * 00 no checksum
- * 10 tcp checksum
- * 11 udp checksum
- *
- * 00 fixed to 0
- * 0 fixed to 0
- * 0 no interrupt on response errors
- * 0 no interrupt on invalid descr
- * 0 no interrupt on dma process termination
- * 0 no interrupt on descr chain end
- * 0 no interrupt on descr complete
- *
- * 000 fixed to 0
- * 0 response error interrupt status
- * 0 invalid descr status
- * 0 dma termination status
- * 0 descr chain end status
- * 0 descr complete status */
-#define SPIDER_NET_DMAC_CMDSTAT_NOCS 0xa00c0000
-#define SPIDER_NET_DMAC_CMDSTAT_TCPCS 0xa00e0000
-#define SPIDER_NET_DMAC_CMDSTAT_UDPCS 0xa00f0000
-#define SPIDER_NET_DESCR_IND_PROC_SHIFT 28
-#define SPIDER_NET_DESCR_IND_PROC_MASKO 0x0fffffff
-
-/* descr ready, descr is in middle of chain, get interrupt on completion */
-#define SPIDER_NET_DMAC_RX_CARDOWNED 0xa0800000
-
-enum spider_net_descr_status {
- SPIDER_NET_DESCR_COMPLETE = 0x00, /* used in rx and tx */
- SPIDER_NET_DESCR_RESPONSE_ERROR = 0x01, /* used in rx and tx */
- SPIDER_NET_DESCR_PROTECTION_ERROR = 0x02, /* used in rx and tx */
- SPIDER_NET_DESCR_FRAME_END = 0x04, /* used in rx */
- SPIDER_NET_DESCR_FORCE_END = 0x05, /* used in rx and tx */
- SPIDER_NET_DESCR_CARDOWNED = 0x0a, /* used in rx and tx */
- SPIDER_NET_DESCR_NOT_IN_USE /* any other value */
-};
+#define SPIDER_NET_DMAC_NOINTR_COMPLETE 0x00800000
+#define SPIDER_NET_DMAC_NOCS 0x00040000
+#define SPIDER_NET_DMAC_TCP 0x00020000
+#define SPIDER_NET_DMAC_UDP 0x00030000
+#define SPIDER_NET_TXDCEST 0x08000000
+
+#define SPIDER_NET_DESCR_IND_PROC_MASK 0xF0000000
+#define SPIDER_NET_DESCR_COMPLETE 0x00000000 /* used in rx and tx */
+#define SPIDER_NET_DESCR_RESPONSE_ERROR 0x10000000 /* used in rx and tx */
+#define SPIDER_NET_DESCR_PROTECTION_ERROR 0x20000000 /* used in rx and tx */
+#define SPIDER_NET_DESCR_FRAME_END 0x40000000 /* used in rx */
+#define SPIDER_NET_DESCR_FORCE_END 0x50000000 /* used in rx and tx */
+#define SPIDER_NET_DESCR_CARDOWNED 0xA0000000 /* used in rx and tx */
+#define SPIDER_NET_DESCR_NOT_IN_USE 0xF0000000
struct spider_net_descr {
/* as defined by the hardware */
} __attribute__((aligned(32)));
struct spider_net_descr_chain {
- /* we walk from tail to head */
+ spinlock_t lock;
struct spider_net_descr *head;
struct spider_net_descr *tail;
};
struct spider_net_descr_chain tx_chain;
struct spider_net_descr_chain rx_chain;
- atomic_t rx_chain_refill;
- atomic_t tx_chain_release;
struct net_device_stats netdev_stats;
static struct pci_device_id write_reorder_chipsets[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_AMD,
PCI_DEVICE_ID_AMD_FE_GATE_700C) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD,
+ PCI_DEVICE_ID_AMD_8131_BRIDGE) },
{ PCI_DEVICE(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_8385_0) },
{ },
* If problems develop with TSO, check this first.
*/
numDesc = skb_shinfo(skb)->nr_frags + 1;
- if(skb_tso_size(skb))
+ if (skb_is_gso(skb))
numDesc++;
/* When checking for free space in the ring, we need to also
TYPHOON_TX_PF_VLAN_TAG_SHIFT);
}
- if(skb_tso_size(skb)) {
+ if (skb_is_gso(skb)) {
first_txd->processFlags |= TYPHOON_TX_PF_TCP_SEGMENT;
first_txd->numDesc++;
#include "hd6457x.c"
+static inline void set_carrier(port_t *port)
+{
+ if (!sca_in(MSCI1_OFFSET + ST3, port) & ST3_DCD)
+ netif_carrier_on(port_to_dev(port));
+ else
+ netif_carrier_off(port_to_dev(port));
+}
+
+
static void sca_msci_intr(port_t *port)
{
- struct net_device *dev = port_to_dev(port);
- card_t* card = port_to_card(port);
- u8 stat = sca_in(MSCI1_OFFSET + ST1, card); /* read MSCI ST1 status */
+ u8 stat = sca_in(MSCI1_OFFSET + ST1, port); /* read MSCI ST1 status */
/* Reset MSCI TX underrun status bit */
- sca_out(stat & ST1_UDRN, MSCI0_OFFSET + ST1, card);
+ sca_out(stat & ST1_UDRN, MSCI0_OFFSET + ST1, port);
if (stat & ST1_UDRN) {
- struct net_device_stats *stats = hdlc_stats(dev);
+ struct net_device_stats *stats = hdlc_stats(port_to_dev(port));
stats->tx_errors++; /* TX Underrun error detected */
stats->tx_fifo_errors++;
}
/* Reset MSCI CDCD status bit - uses ch#2 DCD input */
- sca_out(stat & ST1_CDCD, MSCI1_OFFSET + ST1, card);
+ sca_out(stat & ST1_CDCD, MSCI1_OFFSET + ST1, port);
if (stat & ST1_CDCD)
- hdlc_set_carrier(!(sca_in(MSCI1_OFFSET + ST3, card) & ST3_DCD),
- dev);
+ set_carrier(port);
}
sca_out(IE1_UDRN, MSCI0_OFFSET + IE1, port);
sca_out(IE0_TXINT, MSCI0_OFFSET + IE0, port);
- hdlc_set_carrier(!(sca_in(MSCI1_OFFSET + ST3, port) & ST3_DCD), dev);
+ set_carrier(port);
printk(KERN_DEBUG "0x%X\n", sca_in(MSCI1_OFFSET + ST3, port));
/* enable MSCI1 CDCD interrupt */
}
sca_init_sync_port(card); /* Set up C101 memory */
- hdlc_set_carrier(!(sca_in(MSCI1_OFFSET + ST3, card) & ST3_DCD), dev);
+ set_carrier(card);
printk(KERN_INFO "%s: Moxa C101 on IRQ%u,"
" using %u TX + %u RX packets rings\n",
}
+static inline void sca_set_carrier(port_t *port)
+{
+ if (!(sca_in(get_msci(port) + ST3, port_to_card(port)) & ST3_DCD)) {
+#ifdef DEBUG_LINK
+ printk(KERN_DEBUG "%s: sca_set_carrier on\n",
+ port_to_dev(port)->name);
+#endif
+ netif_carrier_on(port_to_dev(port));
+ } else {
+#ifdef DEBUG_LINK
+ printk(KERN_DEBUG "%s: sca_set_carrier off\n",
+ port_to_dev(port)->name);
+#endif
+ netif_carrier_off(port_to_dev(port));
+ }
+}
+
static void sca_init_sync_port(port_t *port)
{
sca_out(DIR_BOFE, DIR_TX(phy_node(port)), card);
}
}
-
- hdlc_set_carrier(!(sca_in(get_msci(port) + ST3, card) & ST3_DCD),
- port_to_dev(port));
+ sca_set_carrier(port);
}
}
if (stat & ST1_CDCD)
- hdlc_set_carrier(!(sca_in(msci + ST3, card) & ST3_DCD),
- port_to_dev(port));
+ sca_set_carrier(port);
}
#endif
- all DMA interrupts
*/
- hdlc_set_carrier(!(sca_in(msci + ST3, card) & ST3_DCD), dev);
+ sca_set_carrier(port);
#ifdef __HD64570_H
/* MSCI TX INT and RX INT A IRQ enable */
"uptime %ud%uh%um%us)\n",
dev->name, days, hrs,
min, sec);
-#if 0
- netif_carrier_on(dev);
-#endif
+ netif_dormant_off(dev);
hdlc->state.cisco.up = 1;
}
}
hdlc->state.cisco.settings.timeout * HZ)) {
hdlc->state.cisco.up = 0;
printk(KERN_INFO "%s: Link down\n", dev->name);
-#if 0
- netif_carrier_off(dev);
-#endif
+ netif_dormant_on(dev);
}
cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ,
{
hdlc_device *hdlc = dev_to_hdlc(dev);
del_timer_sync(&hdlc->state.cisco.timer);
-#if 0
- if (netif_carrier_ok(dev))
- netif_carrier_off(dev);
-#endif
+ netif_dormant_on(dev);
hdlc->state.cisco.up = 0;
hdlc->state.cisco.request_sent = 0;
}
dev->type = ARPHRD_CISCO;
dev->flags = IFF_POINTOPOINT | IFF_NOARP;
dev->addr_len = 0;
+ netif_dormant_on(dev);
return 0;
}
if (pvc->open_count++ == 0) {
hdlc_device *hdlc = dev_to_hdlc(pvc->master);
if (hdlc->state.fr.settings.lmi == LMI_NONE)
- pvc->state.active = hdlc->carrier;
+ pvc->state.active = netif_carrier_ok(pvc->master);
pvc_carrier(pvc->state.active, pvc);
hdlc->state.fr.dce_changed = 1;
hdlc->state.fr.reliable = reliable;
if (reliable) {
-#if 0
- if (!netif_carrier_ok(dev))
- netif_carrier_on(dev);
-#endif
-
+ netif_dormant_off(dev);
hdlc->state.fr.n391cnt = 0; /* Request full status */
hdlc->state.fr.dce_changed = 1;
}
}
} else {
-#if 0
- if (netif_carrier_ok(dev))
- netif_carrier_off(dev);
-#endif
-
+ netif_dormant_on(dev);
while (pvc) { /* Deactivate all PVCs */
pvc_carrier(0, pvc);
pvc->state.exist = pvc->state.active = 0;
#include <linux/inetdevice.h>
#include <linux/lapb.h>
#include <linux/rtnetlink.h>
+#include <linux/notifier.h>
#include <linux/hdlc.h>
-static const char* version = "HDLC support module revision 1.18";
+static const char* version = "HDLC support module revision 1.19";
#undef DEBUG_LINK
-static void __hdlc_set_carrier_on(struct net_device *dev)
+static inline void hdlc_proto_start(struct net_device *dev)
{
hdlc_device *hdlc = dev_to_hdlc(dev);
if (hdlc->proto.start)
return hdlc->proto.start(dev);
-#if 0
-#ifdef DEBUG_LINK
- if (netif_carrier_ok(dev))
- printk(KERN_ERR "hdlc_set_carrier_on(): already on\n");
-#endif
- netif_carrier_on(dev);
-#endif
}
-static void __hdlc_set_carrier_off(struct net_device *dev)
+static inline void hdlc_proto_stop(struct net_device *dev)
{
hdlc_device *hdlc = dev_to_hdlc(dev);
if (hdlc->proto.stop)
return hdlc->proto.stop(dev);
-
-#if 0
-#ifdef DEBUG_LINK
- if (!netif_carrier_ok(dev))
- printk(KERN_ERR "hdlc_set_carrier_off(): already off\n");
-#endif
- netif_carrier_off(dev);
-#endif
}
-void hdlc_set_carrier(int on, struct net_device *dev)
+static int hdlc_device_event(struct notifier_block *this, unsigned long event,
+ void *ptr)
{
- hdlc_device *hdlc = dev_to_hdlc(dev);
+ struct net_device *dev = ptr;
+ hdlc_device *hdlc;
unsigned long flags;
- on = on ? 1 : 0;
+ int on;
+
+ if (dev->get_stats != hdlc_get_stats)
+ return NOTIFY_DONE; /* not an HDLC device */
+
+ if (event != NETDEV_CHANGE)
+ return NOTIFY_DONE; /* Only interrested in carrier changes */
+
+ on = netif_carrier_ok(dev);
#ifdef DEBUG_LINK
- printk(KERN_DEBUG "hdlc_set_carrier %i\n", on);
+ printk(KERN_DEBUG "%s: hdlc_device_event NETDEV_CHANGE, carrier %i\n",
+ dev->name, on);
#endif
+ hdlc = dev_to_hdlc(dev);
spin_lock_irqsave(&hdlc->state_lock, flags);
if (hdlc->carrier == on)
goto carrier_exit; /* no change in DCD line level */
-#ifdef DEBUG_LINK
- printk(KERN_INFO "%s: carrier %s\n", dev->name, on ? "ON" : "off");
-#endif
hdlc->carrier = on;
if (!hdlc->open)
if (hdlc->carrier) {
printk(KERN_INFO "%s: Carrier detected\n", dev->name);
- __hdlc_set_carrier_on(dev);
+ hdlc_proto_start(dev);
} else {
printk(KERN_INFO "%s: Carrier lost\n", dev->name);
- __hdlc_set_carrier_off(dev);
+ hdlc_proto_stop(dev);
}
carrier_exit:
spin_unlock_irqrestore(&hdlc->state_lock, flags);
+ return NOTIFY_DONE;
}
if (hdlc->carrier) {
printk(KERN_INFO "%s: Carrier detected\n", dev->name);
- __hdlc_set_carrier_on(dev);
+ hdlc_proto_start(dev);
} else
printk(KERN_INFO "%s: No carrier\n", dev->name);
hdlc->open = 0;
if (hdlc->carrier)
- __hdlc_set_carrier_off(dev);
+ hdlc_proto_stop(dev);
spin_unlock_irq(&hdlc->state_lock);
EXPORT_SYMBOL(hdlc_open);
EXPORT_SYMBOL(hdlc_close);
-EXPORT_SYMBOL(hdlc_set_carrier);
EXPORT_SYMBOL(hdlc_ioctl);
EXPORT_SYMBOL(hdlc_setup);
EXPORT_SYMBOL(alloc_hdlcdev);
};
+static struct notifier_block hdlc_notifier = {
+ .notifier_call = hdlc_device_event,
+};
+
+
static int __init hdlc_module_init(void)
{
+ int result;
+
printk(KERN_INFO "%s\n", version);
+ if ((result = register_netdevice_notifier(&hdlc_notifier)) != 0)
+ return result;
dev_add_pack(&hdlc_packet_type);
return 0;
}
static void __exit hdlc_module_exit(void)
{
dev_remove_pack(&hdlc_packet_type);
+ unregister_netdevice_notifier(&hdlc_notifier);
}
printk(KERN_INFO "%s: %s%s module, %s cable%s%s\n",
port->dev->name, pm, dte, cable, dsr, dcd);
- hdlc_set_carrier(value & STATUS_CABLE_DCD, port->dev);
+ if (value & STATUS_CABLE_DCD)
+ netif_carrier_on(port->dev);
+ else
+ netif_carrier_off(port->dev);
}
goto generate_new;
/* Get the noise samples. */
- assert(bcm->noisecalc.nr_samples <= 8);
+ assert(bcm->noisecalc.nr_samples < 8);
i = bcm->noisecalc.nr_samples;
noise[0] = limit_value(noise[0], 0, ARRAY_SIZE(radio->nrssi_lt) - 1);
noise[1] = limit_value(noise[1], 0, ARRAY_SIZE(radio->nrssi_lt) - 1);
#include "orinoco.h"
-static unsigned char *primsym;
-static unsigned char *secsym;
static const char primary_fw_name[] = "symbol_sp24t_prim_fw";
static const char secondary_fw_name[] = "symbol_sp24t_sec_fw";
*/
static int
spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link,
- const unsigned char *image)
+ const unsigned char *image, int secondary)
{
int ret;
const unsigned char *ptr;
first_block = (const struct dblock *) ptr;
/* Read the PDA */
- if (image != primsym) {
+ if (secondary) {
ret = spectrum_read_pda(hw, pda, sizeof(pda));
if (ret)
return ret;
return ret;
/* Write the PDA to the adapter */
- if (image != primsym) {
+ if (secondary) {
ret = spectrum_apply_pda(hw, first_block, pda);
if (ret)
return ret;
ret = hermes_init(hw);
/* hermes_reset() should return 0 with the secondary firmware */
- if (image != primsym && ret != 0)
+ if (secondary && ret != 0)
return -ENODEV;
/* And this should work with any firmware */
const struct firmware *fw_entry;
if (request_firmware(&fw_entry, primary_fw_name,
- &handle_to_dev(link)) == 0) {
- primsym = fw_entry->data;
- } else {
+ &handle_to_dev(link)) != 0) {
printk(KERN_ERR PFX "Cannot find firmware: %s\n",
primary_fw_name);
return -ENOENT;
}
- if (request_firmware(&fw_entry, secondary_fw_name,
- &handle_to_dev(link)) == 0) {
- secsym = fw_entry->data;
- } else {
- printk(KERN_ERR PFX "Cannot find firmware: %s\n",
- secondary_fw_name);
- return -ENOENT;
- }
-
/* Load primary firmware */
- ret = spectrum_dl_image(hw, link, primsym);
+ ret = spectrum_dl_image(hw, link, fw_entry->data, 0);
+ release_firmware(fw_entry);
if (ret) {
printk(KERN_ERR PFX "Primary firmware download failed\n");
return ret;
}
- /* Load secondary firmware */
- ret = spectrum_dl_image(hw, link, secsym);
+ if (request_firmware(&fw_entry, secondary_fw_name,
+ &handle_to_dev(link)) != 0) {
+ printk(KERN_ERR PFX "Cannot find firmware: %s\n",
+ secondary_fw_name);
+ return -ENOENT;
+ }
+ /* Load secondary firmware */
+ ret = spectrum_dl_image(hw, link, fw_entry->data, 1);
+ release_firmware(fw_entry);
if (ret) {
printk(KERN_ERR PFX "Secondary firmware download failed\n");
}
case -ENODEV:
case -ENOENT:
case -ECONNRESET:
- goto kfree;
case -EPIPE:
- usb_clear_halt(urb->dev, EP_INT_IN);
- /* FALL-THROUGH */
+ goto kfree;
default:
goto resubmit;
}
case -ENODEV:
case -ENOENT:
case -ECONNRESET:
- return;
case -EPIPE:
- usb_clear_halt(urb->dev, EP_DATA_IN);
- /* FALL-THROUGH */
+ return;
default:
dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
goto resubmit;
case -ENODEV:
case -ENOENT:
case -ECONNRESET:
+ case -EPIPE:
dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
break;
- case -EPIPE:
- usb_clear_halt(urb->dev, EP_DATA_OUT);
- /* FALL-THROUGH */
default:
dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
goto resubmit;
config HOTPLUG_PCI
tristate "Support for PCI Hotplug (EXPERIMENTAL)"
- depends on PCI && EXPERIMENTAL
- select HOTPLUG
+ depends on PCI && EXPERIMENTAL && HOTPLUG
---help---
Say Y here if you have a motherboard with a PCI Hotplug controller.
This allows you to add and remove PCI cards while the machine is
config HOTPLUG_PCI_ACPI
tristate "ACPI PCI Hotplug driver"
- depends on ACPI && HOTPLUG_PCI
+ depends on ACPI_DOCK && HOTPLUG_PCI
help
Say Y here if you have a system that supports PCI Hotplug using
ACPI.
static void msi_cache_ctor(void *p, kmem_cache_t *cache, unsigned long flags)
{
- memset(p, 0, NR_IRQS * sizeof(struct msi_desc));
+ memset(p, 0, sizeof(struct msi_desc));
}
static int msi_cache_init(void)
{
msi_cachep = kmem_cache_create("msi_cache",
- NR_IRQS * sizeof(struct msi_desc),
+ sizeof(struct msi_desc),
0, SLAB_HWCACHE_ALIGN, msi_cache_ctor, NULL);
if (!msi_cachep)
return -ENOMEM;
#include <asm/dma.h> /* isa_dma_bridge_buggy */
#include "pci.h"
+unsigned int pci_pm_d3_delay = 10;
/**
* pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
} else if (dev->current_state == state)
return 0; /* we're already there */
+ /*
+ * If the device or the parent bridge can't support PCI PM, ignore
+ * the request if we're doing anything besides putting it into D0
+ * (which would only happen on boot).
+ */
+ if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
+ return 0;
+
/* find PCI PM capability in list */
pm = pci_find_capability(dev, PCI_CAP_ID_PM);
/* Mandatory power management transition delays */
/* see PCI PM 1.1 5.6.1 table 18 */
if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
- msleep(10);
+ msleep(pci_pm_d3_delay);
else if (state == PCI_D2 || dev->current_state == PCI_D2)
udelay(200);
#else
#define pci_msi_quirk 0
#endif
-
+extern unsigned int pci_pm_d3_delay;
#ifdef CONFIG_PCI_MSI
void disable_msi_mode(struct pci_dev *dev, int pos, int type);
void pci_no_msi(void);
static inline void pci_restore_msi_state(struct pci_dev *dev) {}
static inline void pci_restore_msix_state(struct pci_dev *dev) {}
#endif
+static inline int pci_no_d1d2(struct pci_dev *dev)
+{
+ unsigned int parent_dstates = 0;
+ if (dev->bus->self)
+ parent_dstates = dev->bus->self->no_d1d2;
+ return (dev->no_d1d2 || parent_dstates);
+
+}
extern int pcie_mch_quirk;
extern struct device_attribute pci_dev_attrs[];
extern struct class_device_attribute class_device_attr_cpuaffinity;
dev->vendor = l & 0xffff;
dev->device = (l >> 16) & 0xffff;
dev->cfg_size = pci_cfg_space_size(dev);
+ dev->error_state = pci_channel_io_normal;
/* Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer)
set this higher, assuming the system even supports it. */
piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, quirk_piix4_acpi );
/*
* ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id );
+#ifdef CONFIG_ACPI_SLEEP
+
+/*
+ * Some VIA systems boot with the abnormal status flag set. This can cause
+ * the BIOS to re-POST the system on resume rather than passing control
+ * back to the OS. Clear the flag on boot
+ */
+static void __devinit quirk_via_abnormal_poweroff(struct pci_dev *dev)
+{
+ u32 reg;
+
+ acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_STATUS,
+ ®);
+
+ if (reg & 0x800) {
+ printk("Clearing abnormal poweroff flag\n");
+ acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
+ ACPI_REGISTER_PM1_STATUS,
+ (u16)0x800);
+ }
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_abnormal_poweroff);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_abnormal_poweroff);
+
+#endif
+
/*
* CardBus controllers have a legacy base address that enables them
* to respond as i82365 pcmcia controllers. We don't want them to
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus );
+#if defined(CONFIG_SCSI_SATA) || defined(CONFIG_SCSI_SATA_MODULE)
+
+/*
+ * If we are using libata we can drive this chip properly but must
+ * do this early on to make the additional device appear during
+ * the PCI scanning.
+ */
+
+static void __devinit quirk_jmicron_dualfn(struct pci_dev *pdev)
+{
+ u32 conf;
+ u8 hdr;
+
+ /* Only poke fn 0 */
+ if (PCI_FUNC(pdev->devfn))
+ return;
+
+ switch(pdev->device) {
+ case PCI_DEVICE_ID_JMICRON_JMB365:
+ case PCI_DEVICE_ID_JMICRON_JMB366:
+ /* Redirect IDE second PATA port to the right spot */
+ pci_read_config_dword(pdev, 0x80, &conf);
+ conf |= (1 << 24);
+ /* Fall through */
+ pci_write_config_dword(pdev, 0x80, conf);
+ case PCI_DEVICE_ID_JMICRON_JMB361:
+ case PCI_DEVICE_ID_JMICRON_JMB363:
+ pci_read_config_dword(pdev, 0x40, &conf);
+ /* Enable dual function mode, AHCI on fn 0, IDE fn1 */
+ /* Set the class codes correctly and then direct IDE 0 */
+ conf &= ~0x000F0200; /* Clear bit 9 and 16-19 */
+ conf |= 0x00C20002; /* Set bit 1, 17, 22, 23 */
+ pci_write_config_dword(pdev, 0x40, conf);
+
+ /* Reconfigure so that the PCI scanner discovers the
+ device is now multifunction */
+
+ pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr);
+ pdev->hdr_type = hdr & 0x7f;
+ pdev->multifunction = !!(hdr & 0x80);
+
+ break;
+ }
+}
+
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn);
+
+#endif
+
#ifdef CONFIG_X86_IO_APIC
static void __init quirk_alder_ioapic(struct pci_dev *pdev)
{
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh);
+/*
+ * Some Intel PCI Express chipsets have trouble with downstream
+ * device power management.
+ */
+static void quirk_intel_pcie_pm(struct pci_dev * dev)
+{
+ pci_pm_d3_delay = 120;
+ dev->no_d1d2 = 1;
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2601, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2602, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2603, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2604, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2605, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2606, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2607, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2608, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm);
/*
* Fixup the cardbus bridges on the IBM Dock II docking station
config PCCARD
tristate "PCCard (PCMCIA/CardBus) support"
- select HOTPLUG
+ depends on HOTPLUG
---help---
Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
computer. These are credit-card size devices such as network cards,
This driver can also be built as a module. If so, the module
will be called rtc-ds1553.
+config RTC_DRV_ISL1208
+ tristate "Intersil 1208"
+ depends on RTC_CLASS && I2C
+ help
+ If you say yes here you get support for the
+ Intersil 1208 RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-isl1208.
+
config RTC_DRV_DS1672
tristate "Dallas/Maxim DS1672"
depends on RTC_CLASS && I2C
obj-$(CONFIG_RTC_INTF_DEV) += rtc-dev.o
obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o
+obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o
obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o
obj-$(CONFIG_RTC_DRV_DS1307) += rtc-ds1307.o
obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o
--- /dev/null
+/*
+ * Intersil ISL1208 rtc class driver
+ *
+ * Copyright 2005,2006 Hebert Valerio Riedel <hvr@gnu.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+
+#define DRV_NAME "isl1208"
+#define DRV_VERSION "0.2"
+
+/* Register map */
+/* rtc section */
+#define ISL1208_REG_SC 0x00
+#define ISL1208_REG_MN 0x01
+#define ISL1208_REG_HR 0x02
+#define ISL1208_REG_HR_MIL (1<<7) /* 24h/12h mode */
+#define ISL1208_REG_HR_PM (1<<5) /* PM/AM bit in 12h mode */
+#define ISL1208_REG_DT 0x03
+#define ISL1208_REG_MO 0x04
+#define ISL1208_REG_YR 0x05
+#define ISL1208_REG_DW 0x06
+#define ISL1208_RTC_SECTION_LEN 7
+
+/* control/status section */
+#define ISL1208_REG_SR 0x07
+#define ISL1208_REG_SR_ARST (1<<7) /* auto reset */
+#define ISL1208_REG_SR_XTOSCB (1<<6) /* crystal oscillator */
+#define ISL1208_REG_SR_WRTC (1<<4) /* write rtc */
+#define ISL1208_REG_SR_ALM (1<<2) /* alarm */
+#define ISL1208_REG_SR_BAT (1<<1) /* battery */
+#define ISL1208_REG_SR_RTCF (1<<0) /* rtc fail */
+#define ISL1208_REG_INT 0x08
+#define ISL1208_REG_09 0x09 /* reserved */
+#define ISL1208_REG_ATR 0x0a
+#define ISL1208_REG_DTR 0x0b
+
+/* alarm section */
+#define ISL1208_REG_SCA 0x0c
+#define ISL1208_REG_MNA 0x0d
+#define ISL1208_REG_HRA 0x0e
+#define ISL1208_REG_DTA 0x0f
+#define ISL1208_REG_MOA 0x10
+#define ISL1208_REG_DWA 0x11
+#define ISL1208_ALARM_SECTION_LEN 6
+
+/* user section */
+#define ISL1208_REG_USR1 0x12
+#define ISL1208_REG_USR2 0x13
+#define ISL1208_USR_SECTION_LEN 2
+
+/* i2c configuration */
+#define ISL1208_I2C_ADDR 0xde
+
+static unsigned short normal_i2c[] = {
+ ISL1208_I2C_ADDR>>1, I2C_CLIENT_END
+};
+I2C_CLIENT_INSMOD; /* defines addr_data */
+
+static int isl1208_attach_adapter(struct i2c_adapter *adapter);
+static int isl1208_detach_client(struct i2c_client *client);
+
+static struct i2c_driver isl1208_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ },
+ .id = I2C_DRIVERID_ISL1208,
+ .attach_adapter = &isl1208_attach_adapter,
+ .detach_client = &isl1208_detach_client,
+};
+
+/* block read */
+static int
+isl1208_i2c_read_regs(struct i2c_client *client, u8 reg, u8 buf[],
+ unsigned len)
+{
+ u8 reg_addr[1] = { reg };
+ struct i2c_msg msgs[2] = {
+ { client->addr, client->flags, sizeof(reg_addr), reg_addr },
+ { client->addr, client->flags | I2C_M_RD, len, buf }
+ };
+ int ret;
+
+ BUG_ON(len == 0);
+ BUG_ON(reg > ISL1208_REG_USR2);
+ BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
+
+ ret = i2c_transfer(client->adapter, msgs, 2);
+ if (ret > 0)
+ ret = 0;
+ return ret;
+}
+
+/* block write */
+static int
+isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
+ unsigned len)
+{
+ u8 i2c_buf[ISL1208_REG_USR2 + 2];
+ struct i2c_msg msgs[1] = {
+ { client->addr, client->flags, len + 1, i2c_buf }
+ };
+ int ret;
+
+ BUG_ON(len == 0);
+ BUG_ON(reg > ISL1208_REG_USR2);
+ BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
+
+ i2c_buf[0] = reg;
+ memcpy(&i2c_buf[1], &buf[0], len);
+
+ ret = i2c_transfer(client->adapter, msgs, 1);
+ if (ret > 0)
+ ret = 0;
+ return ret;
+}
+
+/* simple check to see wether we have a isl1208 */
+static int isl1208_i2c_validate_client(struct i2c_client *client)
+{
+ u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
+ u8 zero_mask[ISL1208_RTC_SECTION_LEN] = {
+ 0x80, 0x80, 0x40, 0xc0, 0xe0, 0x00, 0xf8
+ };
+ int i;
+ int ret;
+
+ ret = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < ISL1208_RTC_SECTION_LEN; ++i) {
+ if (regs[i] & zero_mask[i]) /* check if bits are cleared */
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int isl1208_i2c_get_sr(struct i2c_client *client)
+{
+ return i2c_smbus_read_byte_data(client, ISL1208_REG_SR) == -1 ? -EIO:0;
+}
+
+static int isl1208_i2c_get_atr(struct i2c_client *client)
+{
+ int atr = i2c_smbus_read_byte_data(client, ISL1208_REG_ATR);
+
+ if (atr < 0)
+ return -EIO;
+
+ /* The 6bit value in the ATR register controls the load
+ * capacitance C_load * in steps of 0.25pF
+ *
+ * bit (1<<5) of the ATR register is inverted
+ *
+ * C_load(ATR=0x20) = 4.50pF
+ * C_load(ATR=0x00) = 12.50pF
+ * C_load(ATR=0x1f) = 20.25pF
+ *
+ */
+
+ atr &= 0x3f; /* mask out lsb */
+ atr ^= 1<<5; /* invert 6th bit */
+ atr += 2*9; /* add offset of 4.5pF; unit[atr] = 0.25pF */
+
+ return atr;
+}
+
+static int isl1208_i2c_get_dtr(struct i2c_client *client)
+{
+ int dtr = i2c_smbus_read_byte_data(client, ISL1208_REG_DTR);
+
+ if (dtr < 0)
+ return -EIO;
+
+ /* dtr encodes adjustments of {-60,-40,-20,0,20,40,60} ppm */
+ dtr = ((dtr & 0x3) * 20) * (dtr & (1<<2) ? -1 : 1);
+
+ return dtr;
+}
+
+static int isl1208_i2c_get_usr(struct i2c_client *client)
+{
+ u8 buf[ISL1208_USR_SECTION_LEN] = { 0, };
+ int ret;
+
+ ret = isl1208_i2c_read_regs (client, ISL1208_REG_USR1, buf,
+ ISL1208_USR_SECTION_LEN);
+ if (ret < 0)
+ return ret;
+
+ return (buf[1] << 8) | buf[0];
+}
+
+static int isl1208_i2c_set_usr(struct i2c_client *client, u16 usr)
+{
+ u8 buf[ISL1208_USR_SECTION_LEN];
+
+ buf[0] = usr & 0xff;
+ buf[1] = (usr >> 8) & 0xff;
+
+ return isl1208_i2c_set_regs (client, ISL1208_REG_USR1, buf,
+ ISL1208_USR_SECTION_LEN);
+}
+
+static int isl1208_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+ struct i2c_client *const client = to_i2c_client(dev);
+ int sr, dtr, atr, usr;
+
+ sr = isl1208_i2c_get_sr(client);
+ if (sr < 0) {
+ dev_err(&client->dev, "%s: reading SR failed\n", __func__);
+ return sr;
+ }
+
+ seq_printf(seq, "status_reg\t:%s%s%s%s%s%s (0x%.2x)\n",
+ (sr & ISL1208_REG_SR_RTCF) ? " RTCF" : "",
+ (sr & ISL1208_REG_SR_BAT) ? " BAT" : "",
+ (sr & ISL1208_REG_SR_ALM) ? " ALM" : "",
+ (sr & ISL1208_REG_SR_WRTC) ? " WRTC" : "",
+ (sr & ISL1208_REG_SR_XTOSCB) ? " XTOSCB" : "",
+ (sr & ISL1208_REG_SR_ARST) ? " ARST" : "",
+ sr);
+
+ seq_printf(seq, "batt_status\t: %s\n",
+ (sr & ISL1208_REG_SR_RTCF) ? "bad" : "okay");
+
+ dtr = isl1208_i2c_get_dtr(client);
+ if (dtr >= 0 -1)
+ seq_printf(seq, "digital_trim\t: %d ppm\n", dtr);
+
+ atr = isl1208_i2c_get_atr(client);
+ if (atr >= 0)
+ seq_printf(seq, "analog_trim\t: %d.%.2d pF\n",
+ atr>>2, (atr&0x3)*25);
+
+ usr = isl1208_i2c_get_usr(client);
+ if (usr >= 0)
+ seq_printf(seq, "user_data\t: 0x%.4x\n", usr);
+
+ return 0;
+}
+
+
+static int isl1208_i2c_read_time(struct i2c_client *client,
+ struct rtc_time *tm)
+{
+ int sr;
+ u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
+
+ sr = isl1208_i2c_get_sr(client);
+ if (sr < 0) {
+ dev_err(&client->dev, "%s: reading SR failed\n", __func__);
+ return -EIO;
+ }
+
+ sr = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
+ if (sr < 0) {
+ dev_err(&client->dev, "%s: reading RTC section failed\n",
+ __func__);
+ return sr;
+ }
+
+ tm->tm_sec = BCD2BIN(regs[ISL1208_REG_SC]);
+ tm->tm_min = BCD2BIN(regs[ISL1208_REG_MN]);
+ { /* HR field has a more complex interpretation */
+ const u8 _hr = regs[ISL1208_REG_HR];
+ if (_hr & ISL1208_REG_HR_MIL) /* 24h format */
+ tm->tm_hour = BCD2BIN(_hr & 0x3f);
+ else { // 12h format
+ tm->tm_hour = BCD2BIN(_hr & 0x1f);
+ if (_hr & ISL1208_REG_HR_PM) /* PM flag set */
+ tm->tm_hour += 12;
+ }
+ }
+
+ tm->tm_mday = BCD2BIN(regs[ISL1208_REG_DT]);
+ tm->tm_mon = BCD2BIN(regs[ISL1208_REG_MO]) - 1; /* rtc starts at 1 */
+ tm->tm_year = BCD2BIN(regs[ISL1208_REG_YR]) + 100;
+ tm->tm_wday = BCD2BIN(regs[ISL1208_REG_DW]);
+
+ return 0;
+}
+
+static int isl1208_i2c_read_alarm(struct i2c_client *client,
+ struct rtc_wkalrm *alarm)
+{
+ struct rtc_time *const tm = &alarm->time;
+ u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
+ int sr;
+
+ sr = isl1208_i2c_get_sr(client);
+ if (sr < 0) {
+ dev_err(&client->dev, "%s: reading SR failed\n", __func__);
+ return sr;
+ }
+
+ sr = isl1208_i2c_read_regs(client, ISL1208_REG_SCA, regs,
+ ISL1208_ALARM_SECTION_LEN);
+ if (sr < 0) {
+ dev_err(&client->dev, "%s: reading alarm section failed\n",
+ __func__);
+ return sr;
+ }
+
+ /* MSB of each alarm register is an enable bit */
+ tm->tm_sec = BCD2BIN(regs[ISL1208_REG_SCA-ISL1208_REG_SCA] & 0x7f);
+ tm->tm_min = BCD2BIN(regs[ISL1208_REG_MNA-ISL1208_REG_SCA] & 0x7f);
+ tm->tm_hour = BCD2BIN(regs[ISL1208_REG_HRA-ISL1208_REG_SCA] & 0x3f);
+ tm->tm_mday = BCD2BIN(regs[ISL1208_REG_DTA-ISL1208_REG_SCA] & 0x3f);
+ tm->tm_mon = BCD2BIN(regs[ISL1208_REG_MOA-ISL1208_REG_SCA] & 0x1f)-1;
+ tm->tm_wday = BCD2BIN(regs[ISL1208_REG_DWA-ISL1208_REG_SCA] & 0x03);
+
+ return 0;
+}
+
+static int isl1208_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ return isl1208_i2c_read_time(to_i2c_client(dev), tm);
+}
+
+static int isl1208_i2c_set_time(struct i2c_client *client,
+ struct rtc_time const *tm)
+{
+ int sr;
+ u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
+
+ regs[ISL1208_REG_SC] = BIN2BCD(tm->tm_sec);
+ regs[ISL1208_REG_MN] = BIN2BCD(tm->tm_min);
+ regs[ISL1208_REG_HR] = BIN2BCD(tm->tm_hour) | ISL1208_REG_HR_MIL;
+
+ regs[ISL1208_REG_DT] = BIN2BCD(tm->tm_mday);
+ regs[ISL1208_REG_MO] = BIN2BCD(tm->tm_mon + 1);
+ regs[ISL1208_REG_YR] = BIN2BCD(tm->tm_year - 100);
+
+ regs[ISL1208_REG_DW] = BIN2BCD(tm->tm_wday & 7);
+
+ sr = isl1208_i2c_get_sr(client);
+ if (sr < 0) {
+ dev_err(&client->dev, "%s: reading SR failed\n", __func__);
+ return sr;
+ }
+
+ /* set WRTC */
+ sr = i2c_smbus_write_byte_data (client, ISL1208_REG_SR,
+ sr | ISL1208_REG_SR_WRTC);
+ if (sr < 0) {
+ dev_err(&client->dev, "%s: writing SR failed\n", __func__);
+ return sr;
+ }
+
+ /* write RTC registers */
+ sr = isl1208_i2c_set_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
+ if (sr < 0) {
+ dev_err(&client->dev, "%s: writing RTC section failed\n",
+ __func__);
+ return sr;
+ }
+
+ /* clear WRTC again */
+ sr = i2c_smbus_write_byte_data (client, ISL1208_REG_SR,
+ sr & ~ISL1208_REG_SR_WRTC);
+ if (sr < 0) {
+ dev_err(&client->dev, "%s: writing SR failed\n", __func__);
+ return sr;
+ }
+
+ return 0;
+}
+
+
+static int isl1208_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ return isl1208_i2c_set_time(to_i2c_client(dev), tm);
+}
+
+static int isl1208_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ return isl1208_i2c_read_alarm(to_i2c_client(dev), alarm);
+}
+
+static struct rtc_class_ops isl1208_rtc_ops = {
+ .proc = isl1208_rtc_proc,
+ .read_time = isl1208_rtc_read_time,
+ .set_time = isl1208_rtc_set_time,
+ .read_alarm = isl1208_rtc_read_alarm,
+ //.set_alarm = isl1208_rtc_set_alarm,
+};
+
+/* sysfs interface */
+
+static ssize_t isl1208_sysfs_show_atrim(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int atr;
+
+ atr = isl1208_i2c_get_atr(to_i2c_client(dev));
+ if (atr < 0)
+ return atr;
+
+ return sprintf(buf, "%d.%.2d pF\n", atr>>2, (atr&0x3)*25);
+}
+static DEVICE_ATTR(atrim, S_IRUGO, isl1208_sysfs_show_atrim, NULL);
+
+static ssize_t isl1208_sysfs_show_dtrim(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int dtr;
+
+ dtr = isl1208_i2c_get_dtr(to_i2c_client(dev));
+ if (dtr < 0)
+ return dtr;
+
+ return sprintf(buf, "%d ppm\n", dtr);
+}
+static DEVICE_ATTR(dtrim, S_IRUGO, isl1208_sysfs_show_dtrim, NULL);
+
+static ssize_t isl1208_sysfs_show_usr(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int usr;
+
+ usr = isl1208_i2c_get_usr(to_i2c_client(dev));
+ if (usr < 0)
+ return usr;
+
+ return sprintf(buf, "0x%.4x\n", usr);
+}
+
+static ssize_t isl1208_sysfs_store_usr(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int usr = -1;
+
+ if (buf[0] == '0' && (buf[1] == 'x' || buf[1] == 'X')) {
+ if (sscanf(buf, "%x", &usr) != 1)
+ return -EINVAL;
+ } else {
+ if (sscanf(buf, "%d", &usr) != 1)
+ return -EINVAL;
+ }
+
+ if (usr < 0 || usr > 0xffff)
+ return -EINVAL;
+
+ return isl1208_i2c_set_usr(to_i2c_client(dev), usr) ? -EIO : count;
+}
+static DEVICE_ATTR(usr, S_IRUGO | S_IWUSR, isl1208_sysfs_show_usr,
+ isl1208_sysfs_store_usr);
+
+static int
+isl1208_probe(struct i2c_adapter *adapter, int addr, int kind)
+{
+ int rc = 0;
+ struct i2c_client *new_client = NULL;
+ struct rtc_device *rtc = NULL;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
+ rc = -ENODEV;
+ goto failout;
+ }
+
+ new_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ if (new_client == NULL) {
+ rc = -ENOMEM;
+ goto failout;
+ }
+
+ new_client->addr = addr;
+ new_client->adapter = adapter;
+ new_client->driver = &isl1208_driver;
+ new_client->flags = 0;
+ strcpy(new_client->name, DRV_NAME);
+
+ if (kind < 0) {
+ rc = isl1208_i2c_validate_client(new_client);
+ if (rc < 0)
+ goto failout;
+ }
+
+ rc = i2c_attach_client(new_client);
+ if (rc < 0)
+ goto failout;
+
+ dev_info(&new_client->dev,
+ "chip found, driver version " DRV_VERSION "\n");
+
+ rtc = rtc_device_register(isl1208_driver.driver.name,
+ &new_client->dev,
+ &isl1208_rtc_ops, THIS_MODULE);
+
+ if (IS_ERR(rtc)) {
+ rc = PTR_ERR(rtc);
+ goto failout_detach;
+ }
+
+ i2c_set_clientdata(new_client, rtc);
+
+ rc = isl1208_i2c_get_sr(new_client);
+ if (rc < 0) {
+ dev_err(&new_client->dev, "reading status failed\n");
+ goto failout_unregister;
+ }
+
+ if (rc & ISL1208_REG_SR_RTCF)
+ dev_warn(&new_client->dev, "rtc power failure detected, "
+ "please set clock.\n");
+
+ rc = device_create_file(&new_client->dev, &dev_attr_atrim);
+ if (rc < 0)
+ goto failout_unregister;
+ rc = device_create_file(&new_client->dev, &dev_attr_dtrim);
+ if (rc < 0)
+ goto failout_atrim;
+ rc = device_create_file(&new_client->dev, &dev_attr_usr);
+ if (rc < 0)
+ goto failout_dtrim;
+
+ return 0;
+
+ failout_dtrim:
+ device_remove_file(&new_client->dev, &dev_attr_dtrim);
+ failout_atrim:
+ device_remove_file(&new_client->dev, &dev_attr_atrim);
+ failout_unregister:
+ rtc_device_unregister(rtc);
+ failout_detach:
+ i2c_detach_client(new_client);
+ failout:
+ kfree(new_client);
+ return rc;
+}
+
+static int
+isl1208_attach_adapter (struct i2c_adapter *adapter)
+{
+ return i2c_probe(adapter, &addr_data, isl1208_probe);
+}
+
+static int
+isl1208_detach_client(struct i2c_client *client)
+{
+ int rc;
+ struct rtc_device *const rtc = i2c_get_clientdata(client);
+
+ if (rtc)
+ rtc_device_unregister(rtc); /* do we need to kfree? */
+
+ rc = i2c_detach_client(client);
+ if (rc)
+ return rc;
+
+ kfree(client);
+
+ return 0;
+}
+
+/* module management */
+
+static int __init isl1208_init(void)
+{
+ return i2c_add_driver(&isl1208_driver);
+}
+
+static void __exit isl1208_exit(void)
+{
+ i2c_del_driver(&isl1208_driver);
+}
+
+MODULE_AUTHOR("Herbert Valerio Riedel <hvr@gnu.org>");
+MODULE_DESCRIPTION("Intersil ISL1208 RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_init(isl1208_init);
+module_exit(isl1208_exit);
#include <asm/div64.h>
#include <asm/io.h>
#include <asm/uaccess.h>
-#include <asm/vr41xx/vr41xx.h>
+#include <asm/vr41xx/irq.h>
MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
MODULE_DESCRIPTION("NEC VR4100 series RTC driver");
if (!new)
return ERR_PTR(-ENOMEM);
spin_lock(&dasd_devmap_lock);
- devmap = 0;
+ devmap = NULL;
hash = dasd_hash_busid(bus_id);
list_for_each_entry(tmp, &dasd_hashlists[hash], list)
if (strncmp(tmp->bus_id, bus_id, BUS_ID_SIZE) == 0) {
new->devindex = dasd_max_devindex++;
strncpy(new->bus_id, bus_id, BUS_ID_SIZE);
new->features = features;
- new->device = 0;
+ new->device = NULL;
list_add(&new->list, &dasd_hashlists[hash]);
devmap = new;
- new = 0;
+ new = NULL;
}
spin_unlock(&dasd_devmap_lock);
kfree(new);
int i;
spin_lock(&dasd_devmap_lock);
- devmap = 0;
+ devmap = NULL;
for (i = 0; (i < 256) && !devmap; i++)
list_for_each_entry(tmp, &dasd_hashlists[i], list)
if (tmp->devindex == devindex) {
/* The ccw bus type uses this table to find devices that it sends to
* dasd_eckd_probe */
static struct ccw_device_id dasd_eckd_ids[] = {
- { CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3390, 0), driver_info: 0x1},
- { CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3390, 0), driver_info: 0x2},
- { CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3390, 0), driver_info: 0x3},
- { CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3380, 0), driver_info: 0x4},
- { CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3380, 0), driver_info: 0x5},
- { CCW_DEVICE_DEVTYPE (0x9343, 0, 0x9345, 0), driver_info: 0x6},
- { CCW_DEVICE_DEVTYPE (0x2107, 0, 0x3390, 0), driver_info: 0x7},
- { CCW_DEVICE_DEVTYPE (0x2107, 0, 0x3380, 0), driver_info: 0x8},
- { CCW_DEVICE_DEVTYPE (0x1750, 0, 0x3390, 0), driver_info: 0x9},
- { CCW_DEVICE_DEVTYPE (0x1750, 0, 0x3380, 0), driver_info: 0xa},
+ { CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3390, 0), .driver_info = 0x1},
+ { CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3390, 0), .driver_info = 0x2},
+ { CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3390, 0), .driver_info = 0x3},
+ { CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3380, 0), .driver_info = 0x4},
+ { CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3380, 0), .driver_info = 0x5},
+ { CCW_DEVICE_DEVTYPE (0x9343, 0, 0x9345, 0), .driver_info = 0x6},
+ { CCW_DEVICE_DEVTYPE (0x2107, 0, 0x3390, 0), .driver_info = 0x7},
+ { CCW_DEVICE_DEVTYPE (0x2107, 0, 0x3380, 0), .driver_info = 0x8},
+ { CCW_DEVICE_DEVTYPE (0x1750, 0, 0x3390, 0), .driver_info = 0x9},
+ { CCW_DEVICE_DEVTYPE (0x1750, 0, 0x3380, 0), .driver_info = 0xa},
{ /* end of list */ },
};
};
static struct ccw_device_id dasd_fba_ids[] = {
- { CCW_DEVICE_DEVTYPE (0x6310, 0, 0x9336, 0), driver_info: 0x1},
- { CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3370, 0), driver_info: 0x2},
+ { CCW_DEVICE_DEVTYPE (0x6310, 0, 0x9336, 0), .driver_info = 0x1},
+ { CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3370, 0), .driver_info = 0x2},
{ /* end of list */ },
};
dasd_gendisk_free(struct dasd_device *device)
{
del_gendisk(device->gdp);
- device->gdp->queue = 0;
+ device->gdp->queue = NULL;
put_disk(device->gdp);
- device->gdp = 0;
+ device->gdp = NULL;
}
/*
* device->bdev to lower the offline open_count limit again.
*/
bdev = device->bdev;
- device->bdev = 0;
+ device->bdev = NULL;
/*
* See fs/partition/check.c:delete_partition
*/
memset(&bpart, 0, sizeof(struct blkpg_partition));
memset(&barg, 0, sizeof(struct blkpg_ioctl_arg));
- barg.data = &bpart;
+ barg.data = (void __user *) &bpart;
barg.op = BLKPG_DEL_PARTITION;
for (bpart.pno = device->gdp->minors - 1; bpart.pno > 0; bpart.pno--)
ioctl_by_bdev(bdev, BLKPG, (unsigned long) &barg);
if (bdev != bdev->bd_contains)
// ro setting is not allowed for partitions
return -EINVAL;
- if (get_user(intval, (int *)argp))
+ if (get_user(intval, (int __user *)argp))
return -EFAULT;
set_disk_ro(bdev->bd_disk, intval);
/*
* Parameter parsing functions.
*/
-static int devs = XPRAM_DEVS;
-static unsigned int sizes[XPRAM_MAX_DEVS];
+static int __initdata devs = XPRAM_DEVS;
+static char __initdata *sizes[XPRAM_MAX_DEVS];
module_param(devs, int, 0);
-module_param_array(sizes, int, NULL, 0);
+module_param_array(sizes, charp, NULL, 0);
MODULE_PARM_DESC(devs, "number of devices (\"partitions\"), " \
"the default is " __MODULE_STRING(XPRAM_DEVS) "\n");
"claimed by explicit sizes\n");
MODULE_LICENSE("GPL");
-#ifndef MODULE
-/*
- * Parses the kernel parameters given in the kernel parameter line.
- * The expected format is
- * <number_of_partitions>[","<partition_size>]*
- * where
- * devices is a positive integer that initializes xpram_devs
- * each size is a non-negative integer possibly followed by a
- * magnitude (k,K,m,M,g,G), the list of sizes initialises
- * xpram_sizes
- *
- * Arguments
- * str: substring of kernel parameter line that contains xprams
- * kernel parameters.
- *
- * Result 0 on success, -EINVAL else -- only for Version > 2.3
- *
- * Side effects
- * the global variabls devs is set to the value of
- * <number_of_partitions> and sizes[i] is set to the i-th
- * partition size (if provided). A parsing error of a value
- * results in this value being set to -EINVAL.
- */
-static int __init xpram_setup (char *str)
-{
- char *cp;
- int i;
-
- devs = simple_strtoul(str, &cp, 10);
- if (cp <= str || devs > XPRAM_MAX_DEVS)
- return 0;
- for (i = 0; (i < devs) && (*cp++ == ','); i++) {
- sizes[i] = simple_strtoul(cp, &cp, 10);
- if (*cp == 'g' || *cp == 'G') {
- sizes[i] <<= 20;
- cp++;
- } else if (*cp == 'm' || *cp == 'M') {
- sizes[i] <<= 10;
- cp++;
- } else if (*cp == 'k' || *cp == 'K')
- cp++;
- while (isspace(*cp)) cp++;
- }
- if (*cp == ',' && i >= devs)
- PRINT_WARN("partition sizes list has too many entries.\n");
- else if (*cp != 0)
- PRINT_WARN("ignored '%s' at end of parameter string.\n", cp);
- return 1;
-}
-
-__setup("xpram_parts=", xpram_setup);
-#endif
-
/*
* Copy expanded memory page (4kB) into main memory
* Arguments
{
unsigned long mem_needed;
unsigned long mem_auto;
+ unsigned long long size;
int mem_auto_no;
int i;
mem_needed = 0;
mem_auto_no = 0;
for (i = 0; i < xpram_devs; i++) {
- xpram_sizes[i] = (sizes[i] + 3) & -4UL;
+ if (sizes[i]) {
+ size = simple_strtoull(sizes[i], &sizes[i], 0);
+ switch (sizes[i][0]) {
+ case 'g':
+ case 'G':
+ size <<= 20;
+ break;
+ case 'm':
+ case 'M':
+ size <<= 10;
+ }
+ xpram_sizes[i] = (size + 3) & -4UL;
+ }
if (xpram_sizes[i])
mem_needed += xpram_sizes[i];
else
GFP_KERNEL|GFP_DMA);
if (raw->buffer == NULL) {
spin_lock(&raw3215_device_lock);
- raw3215[line] = 0;
+ raw3215[line] = NULL;
spin_unlock(&raw3215_device_lock);
kfree(raw);
return -ENOMEM;
handle_sysrq(ctrlchar_sysrq_key, NULL, (struct tty_struct *) tty);
}
-static DECLARE_WORK(ctrlchar_work, ctrlchar_handle_sysrq, 0);
+static DECLARE_WORK(ctrlchar_work, ctrlchar_handle_sysrq, NULL);
#endif
};
ushort *key_maps[MAX_NR_KEYMAPS] = {
- plain_map, shift_map, 0, 0,
- ctrl_map, shift_ctrl_map, 0
+ plain_map, shift_map, NULL, NULL,
+ ctrl_map, shift_ctrl_map, NULL,
};
unsigned int keymap_count = 4;
func_buf + 97,
func_buf + 103,
func_buf + 109,
- 0,
+ NULL,
};
struct kbdiacr accent_table[MAX_DIACR] = {
* Process reads from fullscreen 3270.
*/
static ssize_t
-fs3270_read(struct file *filp, char *data, size_t count, loff_t *off)
+fs3270_read(struct file *filp, char __user *data, size_t count, loff_t *off)
{
struct fs3270 *fp;
struct raw3270_request *rq;
* Process writes to fullscreen 3270.
*/
static ssize_t
-fs3270_write(struct file *filp, const char *data, size_t count, loff_t *off)
+fs3270_write(struct file *filp, const char __user *data, size_t count, loff_t *off)
{
struct fs3270 *fp;
struct raw3270_request *rq;
fp->write_command = arg;
break;
case TUBGETI:
- rc = put_user(fp->read_command, (char *) arg);
+ rc = put_user(fp->read_command, (char __user *) arg);
break;
case TUBGETO:
- rc = put_user(fp->write_command,(char *) arg);
+ rc = put_user(fp->write_command,(char __user *) arg);
break;
case TUBGETMOD:
iocb.model = fp->view.model;
iocb.pf_cnt = 24;
iocb.re_cnt = 20;
iocb.map = 0;
- if (copy_to_user((char *) arg, &iocb,
+ if (copy_to_user((char __user *) arg, &iocb,
sizeof(struct raw3270_iocb)))
rc = -EFAULT;
break;
struct fs3270 *fp;
fp = filp->private_data;
- filp->private_data = 0;
+ filp->private_data = NULL;
if (fp) {
fp->fs_pid = 0;
raw3270_reset(&fp->view);
out_kbd:
kfree(kbd);
out:
- return 0;
+ return NULL;
}
void
if (kbd->sysrq) {
if (kbd->sysrq == K(KT_LATIN, '-')) {
kbd->sysrq = 0;
- handle_sysrq(value, 0, kbd->tty);
+ handle_sysrq(value, NULL, kbd->tty);
return;
}
if (value == '-') {
/* disallocate map */
key_map = kbd->key_maps[tmp.kb_table];
if (key_map) {
- kbd->key_maps[tmp.kb_table] = 0;
+ kbd->key_maps[tmp.kb_table] = NULL;
kfree(key_map);
}
break;
#ifdef CONFIG_TN3270_CONSOLE
if (raw3270_registered == 0) {
spin_lock_irqsave(get_ccwdev_lock(view->dev->cdev), flags);
- rq->callback = 0;
+ rq->callback = NULL;
rc = __raw3270_start(rp, view, rq);
if (rc == 0)
while (!raw3270_request_final(rq)) {
rc = __raw3270_size_device_vm(rp);
else
rc = __raw3270_size_device(rp);
- raw3270_init_view.dev = 0;
- rp->view = 0;
+ raw3270_init_view.dev = NULL;
+ rp->view = NULL;
up(&raw3270_init_sem);
if (rc == 0) { /* Found something. */
/* Try to find a model. */
rp->view = &raw3270_init_view;
raw3270_init_view.dev = rp;
rc = raw3270_start_init(rp, &raw3270_init_view, &rp->init_request);
- raw3270_init_view.dev = 0;
- rp->view = 0;
+ raw3270_init_view.dev = NULL;
+ rp->view = NULL;
up(&raw3270_init_sem);
return rc;
}
else if (!test_bit(RAW3270_FLAGS_READY, &rp->flags))
rc = -ENODEV;
else {
- oldview = 0;
+ oldview = NULL;
if (rp->view) {
oldview = rp->view;
oldview->fn->deactivate(oldview);
rp->view = nv;
if (nv->fn->activate(nv) == 0)
break;
- rp->view = 0;
+ rp->view = NULL;
}
}
}
spin_lock_irqsave(get_ccwdev_lock(rp->cdev), flags);
if (rp->view == view) {
view->fn->deactivate(view);
- rp->view = 0;
+ rp->view = NULL;
/* Move deactivated view to end of list. */
list_del_init(&view->list);
list_add_tail(&view->list, &rp->view_list);
rp->view = view;
if (view->fn->activate(view) == 0)
break;
- rp->view = 0;
+ rp->view = NULL;
}
}
}
spin_lock_irqsave(get_ccwdev_lock(rp->cdev), flags);
if (rp->view == view) {
view->fn->deactivate(view);
- rp->view = 0;
+ rp->view = NULL;
}
list_del_init(&view->list);
if (!rp->view && test_bit(RAW3270_FLAGS_READY, &rp->flags)) {
/* Remove from device chain. */
mutex_lock(&raw3270_mutex);
- if (rp->clttydev)
+ if (rp->clttydev && !IS_ERR(rp->clttydev))
class_device_destroy(class3270,
MKDEV(IBM_TTY3270_MAJOR, rp->minor));
- if (rp->cltubdev)
+ if (rp->cltubdev && !IS_ERR(rp->cltubdev))
class_device_destroy(class3270,
MKDEV(IBM_FS3270_MAJOR, rp->minor));
list_del_init(&rp->list);
/* Disconnect from ccw_device. */
cdev = rp->cdev;
- rp->cdev = 0;
- cdev->dev.driver_data = 0;
- cdev->handler = 0;
+ rp->cdev = NULL;
+ cdev->dev.driver_data = NULL;
+ cdev->handler = NULL;
/* Put ccw_device structure. */
put_device(&cdev->dev);
return snprintf(buf, PAGE_SIZE, "%i\n",
((struct raw3270 *) dev->driver_data)->model);
}
-static DEVICE_ATTR(model, 0444, raw3270_model_show, 0);
+static DEVICE_ATTR(model, 0444, raw3270_model_show, NULL);
static ssize_t
raw3270_rows_show(struct device *dev, struct device_attribute *attr, char *buf)
return snprintf(buf, PAGE_SIZE, "%i\n",
((struct raw3270 *) dev->driver_data)->rows);
}
-static DEVICE_ATTR(rows, 0444, raw3270_rows_show, 0);
+static DEVICE_ATTR(rows, 0444, raw3270_rows_show, NULL);
static ssize_t
raw3270_columns_show(struct device *dev, struct device_attribute *attr, char *buf)
return snprintf(buf, PAGE_SIZE, "%i\n",
((struct raw3270 *) dev->driver_data)->cols);
}
-static DEVICE_ATTR(columns, 0444, raw3270_columns_show, 0);
+static DEVICE_ATTR(columns, 0444, raw3270_columns_show, NULL);
static struct attribute * raw3270_attrs[] = {
&dev_attr_model.attr,
.attrs = raw3270_attrs,
};
-static void
-raw3270_create_attributes(struct raw3270 *rp)
+static int raw3270_create_attributes(struct raw3270 *rp)
{
- //FIXME: check return code
- sysfs_create_group(&rp->cdev->dev.kobj, &raw3270_attr_group);
- rp->clttydev =
- class_device_create(class3270, NULL,
- MKDEV(IBM_TTY3270_MAJOR, rp->minor),
- &rp->cdev->dev, "tty%s",
- rp->cdev->dev.bus_id);
- rp->cltubdev =
- class_device_create(class3270, NULL,
- MKDEV(IBM_FS3270_MAJOR, rp->minor),
- &rp->cdev->dev, "tub%s",
- rp->cdev->dev.bus_id);
+ int rc;
+
+ rc = sysfs_create_group(&rp->cdev->dev.kobj, &raw3270_attr_group);
+ if (rc)
+ goto out;
+
+ rp->clttydev = class_device_create(class3270, NULL,
+ MKDEV(IBM_TTY3270_MAJOR, rp->minor),
+ &rp->cdev->dev, "tty%s",
+ rp->cdev->dev.bus_id);
+ if (IS_ERR(rp->clttydev)) {
+ rc = PTR_ERR(rp->clttydev);
+ goto out_ttydev;
+ }
+
+ rp->cltubdev = class_device_create(class3270, NULL,
+ MKDEV(IBM_FS3270_MAJOR, rp->minor),
+ &rp->cdev->dev, "tub%s",
+ rp->cdev->dev.bus_id);
+ if (!IS_ERR(rp->cltubdev))
+ goto out;
+
+ rc = PTR_ERR(rp->cltubdev);
+ class_device_destroy(class3270, MKDEV(IBM_TTY3270_MAJOR, rp->minor));
+
+out_ttydev:
+ sysfs_remove_group(&rp->cdev->dev.kobj, &raw3270_attr_group);
+out:
+ return rc;
}
/*
rc = raw3270_reset_device(rp);
if (rc)
goto failure;
- raw3270_create_attributes(rp);
+ rc = raw3270_create_attributes(rp);
+ if (rc)
+ goto failure;
set_bit(RAW3270_FLAGS_READY, &rp->flags);
mutex_lock(&raw3270_mutex);
list_for_each_entry(np, &raw3270_notifier, list)
spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
if (rp->view) {
rp->view->fn->deactivate(rp->view);
- rp->view = 0;
+ rp->view = NULL;
}
while (!list_empty(&rp->view_list)) {
v = list_entry(rp->view_list.next, struct raw3270_view, list);
INIT_LIST_HEAD(&cs->update);
return cs;
}
- return 0;
+ return NULL;
}
static inline unsigned long
};
static struct ccw_device_id tape_34xx_ids[] = {
- { CCW_DEVICE_DEVTYPE(0x3480, 0, 0x3480, 0), driver_info: tape_3480},
- { CCW_DEVICE_DEVTYPE(0x3490, 0, 0x3490, 0), driver_info: tape_3490},
- { /* end of list */ }
+ { CCW_DEVICE_DEVTYPE(0x3480, 0, 0x3480, 0), .driver_info = tape_3480},
+ { CCW_DEVICE_DEVTYPE(0x3490, 0, 0x3490, 0), .driver_info = tape_3490},
+ { /* end of list */ },
};
static int
device,
"%s", tcd->device_name
);
- sysfs_create_link(
+ rc = PTR_ERR(tcd->class_device);
+ if (rc)
+ goto fail_with_cdev;
+ rc = sysfs_create_link(
&device->kobj,
&tcd->class_device->kobj,
tcd->mode_name
);
+ if (rc)
+ goto fail_with_class_device;
return tcd;
+fail_with_class_device:
+ class_device_destroy(tape_class, tcd->char_device->dev);
+
fail_with_cdev:
cdev_del(tcd->char_device);
tape_generic_probe(struct ccw_device *cdev)
{
struct tape_device *device;
+ int ret;
device = tape_alloc_device();
if (IS_ERR(device))
return -ENODEV;
- PRINT_INFO("tape device %s found\n", cdev->dev.bus_id);
+ ccw_device_set_options(cdev, CCWDEV_DO_PATHGROUP);
+ ret = sysfs_create_group(&cdev->dev.kobj, &tape_attr_group);
+ if (ret) {
+ tape_put_device(device);
+ PRINT_ERR("probe failed for tape device %s\n", cdev->dev.bus_id);
+ return ret;
+ }
cdev->dev.driver_data = device;
+ cdev->handler = __tape_do_irq;
device->cdev = cdev;
device->cdev_id = busid_to_int(cdev->dev.bus_id);
- cdev->handler = __tape_do_irq;
-
- ccw_device_set_options(cdev, CCWDEV_DO_PATHGROUP);
- sysfs_create_group(&cdev->dev.kobj, &tape_attr_group);
-
- return 0;
+ PRINT_INFO("tape device %s found\n", cdev->dev.bus_id);
+ return ret;
}
static inline void
{
struct string *s;
- tp->rcl_walk = 0;
+ tp->rcl_walk = NULL;
if (len <= 0)
return;
if (tp->rcl_nr >= tp->rcl_max) {
else if (!list_empty(&tp->rcl_lines))
tp->rcl_walk = tp->rcl_lines.prev;
s = tp->rcl_walk ?
- list_entry(tp->rcl_walk, struct string, list) : 0;
+ list_entry(tp->rcl_walk, struct string, list) : NULL;
if (tp->rcl_walk) {
s = list_entry(tp->rcl_walk, struct string, list);
tty3270_update_prompt(tp, s->string, s->len);
} else
- tty3270_update_prompt(tp, 0, 0);
+ tty3270_update_prompt(tp, NULL, 0);
tty3270_set_timer(tp, 1);
}
spin_unlock_bh(&tp->view.lock);
* has to be emitted to the tty and for 0x6d the screen
* needs to be redrawn.
*/
- input = 0;
+ input = NULL;
len = 0;
if (tp->input->string[0] == 0x7d) {
/* Enter: write input to tty. */
tty3270_update_status(tp);
}
/* Clear input area. */
- tty3270_update_prompt(tp, 0, 0);
+ tty3270_update_prompt(tp, NULL, 0);
tty3270_set_timer(tp, 1);
} else if (tp->input->string[0] == 0x6d) {
/* Display has been cleared. Redraw. */
tp = (struct tty3270 *) view;
tty = tp->tty;
if (tty) {
- tty->driver_data = 0;
- tp->tty = tp->kbd->tty = 0;
+ tty->driver_data = NULL;
+ tp->tty = tp->kbd->tty = NULL;
tty_hangup(tty);
raw3270_put_view(&tp->view);
}
return;
tp = (struct tty3270 *) tty->driver_data;
if (tp) {
- tty->driver_data = 0;
- tp->tty = tp->kbd->tty = 0;
+ tty->driver_data = NULL;
+ tp->tty = tp->kbd->tty = NULL;
raw3270_put_view(&tp->view);
}
}
new = L_ECHO(tty) ? TF_INPUT: TF_INPUTN;
if (new != tp->inattr) {
tp->inattr = new;
- tty3270_update_prompt(tp, 0, 0);
+ tty3270_update_prompt(tp, NULL, 0);
tty3270_set_timer(tp, 1);
}
}
tty3270_notifier(int index, int active)
{
if (active)
- tty_register_device(tty3270_driver, index, 0);
+ tty_register_device(tty3270_driver, index, NULL);
else
tty_unregister_device(tty3270_driver, index);
}
raw3270_unregister_notifier(tty3270_notifier);
driver = tty3270_driver;
- tty3270_driver = 0;
+ tty3270_driver = NULL;
tty_unregister_driver(driver);
tty3270_del_views();
}
*/
static int vmlogrdr_open(struct inode *, struct file *);
static int vmlogrdr_release(struct inode *, struct file *);
-static ssize_t vmlogrdr_read (struct file *filp, char *data, size_t count,
- loff_t * ppos);
+static ssize_t vmlogrdr_read (struct file *filp, char __user *data,
+ size_t count, loff_t * ppos);
static struct file_operations vmlogrdr_fops = {
.owner = THIS_MODULE,
static ssize_t
-vmlogrdr_read (struct file *filp, char *data, size_t count, loff_t * ppos)
+vmlogrdr_read(struct file *filp, char __user *data, size_t count, loff_t * ppos)
{
int rc;
struct vmlogrdr_priv_t * priv = filp->private_data;
return 0;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
- return put_user(0, (int *)arg);
+ return put_user(0, (int __user *)arg);
case WDIOC_GETTEMP:
return -EINVAL;
case WDIOC_SETOPTIONS:
if (!try_module_get(gdrv->owner))
return -EINVAL;
- value = simple_strtoul(buf, 0, 0);
+ value = simple_strtoul(buf, NULL, 0);
ret = count;
if (value == 1)
ccwgroup_set_online(gdev);
return desc;
}
+static int reset_channel_path(struct channel_path *chp)
+{
+ int cc;
+
+ cc = rchp(chp->id);
+ switch (cc) {
+ case 0:
+ return 0;
+ case 2:
+ return -EBUSY;
+ default:
+ return -ENODEV;
+ }
+}
+
+static void reset_channel_paths_css(struct channel_subsystem *css)
+{
+ int i;
+
+ for (i = 0; i <= __MAX_CHPID; i++) {
+ if (css->chps[i])
+ reset_channel_path(css->chps[i]);
+ }
+}
+
+void cio_reset_channel_paths(void)
+{
+ int i;
+
+ for (i = 0; i <= __MAX_CSSID; i++) {
+ if (css[i] && css[i]->valid)
+ reset_channel_paths_css(css[i]);
+ }
+}
static int __init
chsc_alloc_sei_area(void)
memset(sch, 0, sizeof(struct subchannel));
spin_lock_init(&sch->lock);
+ mutex_init(&sch->reg_mutex);
/* Set a name for the subchannel */
snprintf (sch->dev.bus_id, BUS_ID_SIZE, "0.%x.%04x", schid.ssid,
cio_get_console_subchannel(void)
{
if (!console_subchannel_in_use)
- return 0;
+ return NULL;
return &console_subchannel;
}
reipl(unsigned long devno)
{
clear_all_subchannels();
+ cio_reset_channel_paths();
do_reipl(devno);
}
#define S390_CIO_H
#include "schid.h"
+#include <linux/mutex.h>
/*
* where we put the ssd info
struct subchannel {
struct subchannel_id schid;
spinlock_t lock; /* subchannel lock */
-
+ struct mutex reg_mutex;
enum {
SUBCHANNEL_TYPE_IO = 0,
SUBCHANNEL_TYPE_CHSC = 1,
if (count) {
interval = cmb_data->last_update -
cdev->private->cmb_start_time;
+ interval = (interval * 1000) >> 12;
interval /= count;
} else
interval = -1;
&dev_attr_avg_device_disconnect_time.attr,
&dev_attr_avg_control_unit_queuing_time.attr,
&dev_attr_avg_device_active_only_time.attr,
- 0,
+ NULL,
};
static struct attribute_group cmf_attr_group = {
&dev_attr_avg_device_active_only_time.attr,
&dev_attr_avg_device_busy_time.attr,
&dev_attr_avg_initial_command_response_time.attr,
- 0,
+ NULL,
};
static struct attribute_group cmf_attr_group_ext = {
extern int css_get_ssd_info(struct subchannel *sch);
+
+int css_sch_device_register(struct subchannel *sch)
+{
+ int ret;
+
+ mutex_lock(&sch->reg_mutex);
+ ret = device_register(&sch->dev);
+ mutex_unlock(&sch->reg_mutex);
+ return ret;
+}
+
+void css_sch_device_unregister(struct subchannel *sch)
+{
+ mutex_lock(&sch->reg_mutex);
+ device_unregister(&sch->dev);
+ mutex_unlock(&sch->reg_mutex);
+}
+
static int
css_register_subchannel(struct subchannel *sch)
{
sch->dev.release = &css_subchannel_release;
/* make it known to the system */
- ret = device_register(&sch->dev);
+ ret = css_sch_device_register(sch);
if (ret)
printk (KERN_WARNING "%s: could not register %s\n",
__func__, sch->dev.bus_id);
* The device will be killed automatically.
*/
cio_disable_subchannel(sch);
- device_unregister(&sch->dev);
+ css_sch_device_unregister(sch);
/* Reset intparm to zeroes. */
sch->schib.pmcw.intparm = 0;
cio_modify(sch);
* away in any case.
*/
if (!disc) {
- device_unregister(&sch->dev);
+ css_sch_device_unregister(sch);
/* Reset intparm to zeroes. */
sch->schib.pmcw.intparm = 0;
cio_modify(sch);
ret = device_register(&css[i]->device);
if (ret)
goto out_free;
- if (css_characteristics_avail && css_chsc_characteristics.secm)
- device_create_file(&css[i]->device,
- &dev_attr_cm_enable);
+ if (css_characteristics_avail &&
+ css_chsc_characteristics.secm) {
+ ret = device_create_file(&css[i]->device,
+ &dev_attr_cm_enable);
+ if (ret)
+ goto out_device;
+ }
}
css_init_done = 1;
for_each_subchannel(__init_channel_subsystem, NULL);
return 0;
+out_device:
+ device_unregister(&css[i]->device);
out_free:
kfree(css[i]);
out_unregister:
struct qdio_irq *qdio_data;
struct irb irb; /* device status */
struct senseid senseid; /* SenseID info */
- struct pgid pgid; /* path group ID */
+ struct pgid pgid[8]; /* path group IDs per chpid*/
struct ccw1 iccws[2]; /* ccws for SNID/SID/SPGID commands */
struct work_struct kick_work;
wait_queue_head_t wait_q;
extern struct css_driver io_subchannel_driver;
extern int css_probe_device(struct subchannel_id);
+extern int css_sch_device_register(struct subchannel *);
+extern void css_sch_device_unregister(struct subchannel *);
extern struct subchannel * get_subchannel_by_schid(struct subchannel_id);
extern int css_init_done;
extern int for_each_subchannel(int(*fn)(struct subchannel_id, void *), void *);
if ((buffer_size - length <= 0) || (i >= num_envp))
return -ENOMEM;
- envp[i] = 0;
+ envp[i] = NULL;
return 0;
}
* 'throw away device'.
*/
sch = to_subchannel(cdev->dev.parent);
- device_unregister(&sch->dev);
+ css_sch_device_unregister(sch);
/* Reset intparm to zeroes. */
sch->schib.pmcw.intparm = 0;
cio_modify(sch);
other_sch->schib.pmcw.intparm = 0;
cio_modify(other_sch);
}
- device_unregister(&other_sch->dev);
+ css_sch_device_unregister(other_sch);
}
}
/* Update ssd info here. */
struct subchannel *sch;
sch = to_subchannel(cdev->dev.parent);
- device_unregister(&sch->dev);
+ css_sch_device_unregister(sch);
/* Reset intparm to zeroes. */
sch->schib.pmcw.intparm = 0;
cio_modify(sch);
__ccwdev_check_busid);
put_driver(drv);
- return dev ? to_ccwdev(dev) : 0;
+ return dev ? to_ccwdev(dev) : NULL;
}
/************************** device driver handling ************************/
ret = cdrv->probe ? cdrv->probe(cdev) : -ENODEV;
if (ret) {
- cdev->drv = 0;
+ cdev->drv = NULL;
return ret;
}
ret, cdev->dev.bus_id);
}
ccw_device_set_timeout(cdev, 0);
- cdev->drv = 0;
+ cdev->drv = NULL;
return 0;
}
put_device (&cdev->dev);
}
+static inline int cmp_pgid(struct pgid *p1, struct pgid *p2)
+{
+ char *c1;
+ char *c2;
+
+ c1 = (char *)p1;
+ c2 = (char *)p2;
+
+ return memcmp(c1 + 1, c2 + 1, sizeof(struct pgid) - 1);
+}
+
+static void __ccw_device_get_common_pgid(struct ccw_device *cdev)
+{
+ int i;
+ int last;
+
+ last = 0;
+ for (i = 0; i < 8; i++) {
+ if (cdev->private->pgid[i].inf.ps.state1 == SNID_STATE1_RESET)
+ /* No PGID yet */
+ continue;
+ if (cdev->private->pgid[last].inf.ps.state1 ==
+ SNID_STATE1_RESET) {
+ /* First non-zero PGID */
+ last = i;
+ continue;
+ }
+ if (cmp_pgid(&cdev->private->pgid[i],
+ &cdev->private->pgid[last]) == 0)
+ /* Non-conflicting PGIDs */
+ continue;
+
+ /* PGID mismatch, can't pathgroup. */
+ CIO_MSG_EVENT(0, "SNID - pgid mismatch for device "
+ "0.%x.%04x, can't pathgroup\n",
+ cdev->private->ssid, cdev->private->devno);
+ cdev->private->options.pgroup = 0;
+ return;
+ }
+ if (cdev->private->pgid[last].inf.ps.state1 ==
+ SNID_STATE1_RESET)
+ /* No previous pgid found */
+ memcpy(&cdev->private->pgid[0], &css[0]->global_pgid,
+ sizeof(struct pgid));
+ else
+ /* Use existing pgid */
+ memcpy(&cdev->private->pgid[0], &cdev->private->pgid[last],
+ sizeof(struct pgid));
+}
+
/*
* Function called from device_pgid.c after sense path ground has completed.
*/
sch = to_subchannel(cdev->dev.parent);
switch (err) {
- case 0:
- /* Start Path Group verification. */
- sch->vpm = 0; /* Start with no path groups set. */
- cdev->private->state = DEV_STATE_VERIFY;
- ccw_device_verify_start(cdev);
+ case -EOPNOTSUPP: /* path grouping not supported, use nop instead. */
+ cdev->private->options.pgroup = 0;
+ break;
+ case 0: /* success */
+ case -EACCES: /* partial success, some paths not operational */
+ /* Check if all pgids are equal or 0. */
+ __ccw_device_get_common_pgid(cdev);
break;
case -ETIME: /* Sense path group id stopped by timeout. */
case -EUSERS: /* device is reserved for someone else. */
ccw_device_done(cdev, DEV_STATE_BOXED);
- break;
- case -EOPNOTSUPP: /* path grouping not supported, just set online. */
- cdev->private->options.pgroup = 0;
- ccw_device_done(cdev, DEV_STATE_ONLINE);
- break;
+ return;
default:
ccw_device_done(cdev, DEV_STATE_NOT_OPER);
- break;
+ return;
}
+ /* Start Path Group verification. */
+ sch->vpm = 0; /* Start with no path groups set. */
+ cdev->private->state = DEV_STATE_VERIFY;
+ ccw_device_verify_start(cdev);
}
/*
}
/* Do we want to do path grouping? */
if (!cdev->private->options.pgroup) {
- /* No, set state online immediately. */
- ccw_device_done(cdev, DEV_STATE_ONLINE);
+ /* Start initial path verification. */
+ cdev->private->state = DEV_STATE_VERIFY;
+ ccw_device_verify_start(cdev);
return 0;
}
/* Do a SensePGID first. */
/* Are we doing path grouping? */
if (!cdev->private->options.pgroup) {
/* No, set state offline immediately. */
+ sch->vpm = 0;
ccw_device_done(cdev, DEV_STATE_OFFLINE);
return 0;
}
{
struct subchannel *sch;
- if (!cdev->private->options.pgroup)
- return;
if (cdev->private->state == DEV_STATE_W4SENSE) {
cdev->private->flags.doverify = 1;
return;
ccw_device_wait4io_verify(struct ccw_device *cdev, enum dev_event dev_event)
{
/* When the I/O has terminated, we have to start verification. */
- if (cdev->private->options.pgroup)
- cdev->private->flags.doverify = 1;
+ cdev->private->flags.doverify = 1;
}
static void
struct subchannel *sch;
struct ccw1 *ccw;
int ret;
+ int i;
sch = to_subchannel(cdev->dev.parent);
+ /* Return if we already checked on all paths. */
+ if (cdev->private->imask == 0)
+ return (sch->lpm == 0) ? -ENODEV : -EACCES;
+ i = 8 - ffs(cdev->private->imask);
+
/* Setup sense path group id channel program. */
ccw = cdev->private->iccws;
ccw->cmd_code = CCW_CMD_SENSE_PGID;
- ccw->cda = (__u32) __pa (&cdev->private->pgid);
ccw->count = sizeof (struct pgid);
ccw->flags = CCW_FLAG_SLI;
ret = -ENODEV;
while (cdev->private->imask != 0) {
/* Try every path multiple times. */
+ ccw->cda = (__u32) __pa (&cdev->private->pgid[i]);
if (cdev->private->iretry > 0) {
cdev->private->iretry--;
ret = cio_start (sch, cdev->private->iccws,
}
cdev->private->imask >>= 1;
cdev->private->iretry = 5;
+ i++;
}
+
return ret;
}
cdev->private->state = DEV_STATE_SENSE_PGID;
cdev->private->imask = 0x80;
cdev->private->iretry = 5;
- memset (&cdev->private->pgid, 0, sizeof (struct pgid));
+ memset (&cdev->private->pgid, 0, sizeof (cdev->private->pgid));
ret = __ccw_device_sense_pgid_start(cdev);
if (ret && ret != -EBUSY)
ccw_device_sense_pgid_done(cdev, ret);
{
struct subchannel *sch;
struct irb *irb;
+ int i;
sch = to_subchannel(cdev->dev.parent);
irb = &cdev->private->irb;
sch->schid.sch_no, sch->orb.lpm);
return -EACCES;
}
- if (cdev->private->pgid.inf.ps.state2 == SNID_STATE2_RESVD_ELSE) {
+ i = 8 - ffs(cdev->private->imask);
+ if (cdev->private->pgid[i].inf.ps.state2 == SNID_STATE2_RESVD_ELSE) {
CIO_MSG_EVENT(2, "SNID - Device %04x on Subchannel 0.%x.%04x "
"is reserved by someone else\n",
cdev->private->devno, sch->schid.ssid,
memset(&cdev->private->irb, 0, sizeof(struct irb));
switch (ret) {
/* 0, -ETIME, -EOPNOTSUPP, -EAGAIN, -EACCES or -EUSERS */
- case 0: /* Sense Path Group ID successful. */
- if (cdev->private->pgid.inf.ps.state1 == SNID_STATE1_RESET)
- memcpy(&cdev->private->pgid, &css[0]->global_pgid,
- sizeof(struct pgid));
- ccw_device_sense_pgid_done(cdev, 0);
- break;
case -EOPNOTSUPP: /* Sense Path Group ID not supported */
ccw_device_sense_pgid_done(cdev, -EOPNOTSUPP);
break;
break;
case -EACCES: /* channel is not operational. */
sch->lpm &= ~cdev->private->imask;
+ /* Fall through. */
+ case 0: /* Sense Path Group ID successful. */
cdev->private->imask >>= 1;
cdev->private->iretry = 5;
/* Fall through. */
case -EAGAIN: /* Try again. */
ret = __ccw_device_sense_pgid_start(cdev);
if (ret != 0 && ret != -EBUSY)
- ccw_device_sense_pgid_done(cdev, -ENODEV);
+ ccw_device_sense_pgid_done(cdev, ret);
break;
case -EUSERS: /* device is reserved for someone else. */
ccw_device_sense_pgid_done(cdev, -EUSERS);
sch = to_subchannel(cdev->dev.parent);
/* Setup sense path group id channel program. */
- cdev->private->pgid.inf.fc = func;
+ cdev->private->pgid[0].inf.fc = func;
ccw = cdev->private->iccws;
if (!cdev->private->flags.pgid_single) {
- cdev->private->pgid.inf.fc |= SPID_FUNC_MULTI_PATH;
+ cdev->private->pgid[0].inf.fc |= SPID_FUNC_MULTI_PATH;
ccw->cmd_code = CCW_CMD_SUSPEND_RECONN;
ccw->cda = 0;
ccw->count = 0;
ccw->flags = CCW_FLAG_SLI | CCW_FLAG_CC;
ccw++;
} else
- cdev->private->pgid.inf.fc |= SPID_FUNC_SINGLE_PATH;
+ cdev->private->pgid[0].inf.fc |= SPID_FUNC_SINGLE_PATH;
ccw->cmd_code = CCW_CMD_SET_PGID;
- ccw->cda = (__u32) __pa (&cdev->private->pgid);
+ ccw->cda = (__u32) __pa (&cdev->private->pgid[0]);
ccw->count = sizeof (struct pgid);
ccw->flags = CCW_FLAG_SLI;
return ret;
}
+/*
+ * Helper function to send a nop ccw down a path.
+ */
+static int __ccw_device_do_nop(struct ccw_device *cdev)
+{
+ struct subchannel *sch;
+ struct ccw1 *ccw;
+ int ret;
+
+ sch = to_subchannel(cdev->dev.parent);
+
+ /* Setup nop channel program. */
+ ccw = cdev->private->iccws;
+ ccw->cmd_code = CCW_CMD_NOOP;
+ ccw->cda = 0;
+ ccw->count = 0;
+ ccw->flags = CCW_FLAG_SLI;
+
+ /* Reset device status. */
+ memset(&cdev->private->irb, 0, sizeof(struct irb));
+
+ /* Try multiple times. */
+ ret = -ENODEV;
+ if (cdev->private->iretry > 0) {
+ cdev->private->iretry--;
+ ret = cio_start (sch, cdev->private->iccws,
+ cdev->private->imask);
+ /* ret is 0, -EBUSY, -EACCES or -ENODEV */
+ if ((ret != -EACCES) && (ret != -ENODEV))
+ return ret;
+ }
+ /* nop command failed on this path. Switch it off. */
+ sch->lpm &= ~cdev->private->imask;
+ sch->vpm &= ~cdev->private->imask;
+ CIO_MSG_EVENT(2, "NOP - Device %04x on Subchannel "
+ "0.%x.%04x, lpm %02X, became 'not operational'\n",
+ cdev->private->devno, sch->schid.ssid,
+ sch->schid.sch_no, cdev->private->imask);
+ return ret;
+}
+
+
/*
* Called from interrupt context to check if a valid answer
* to Set Path Group ID was received.
return 0;
}
+/*
+ * Called from interrupt context to check the path status after a nop has
+ * been send.
+ */
+static int __ccw_device_check_nop(struct ccw_device *cdev)
+{
+ struct subchannel *sch;
+ struct irb *irb;
+
+ sch = to_subchannel(cdev->dev.parent);
+ irb = &cdev->private->irb;
+ if (irb->scsw.fctl & (SCSW_FCTL_HALT_FUNC | SCSW_FCTL_CLEAR_FUNC))
+ return -ETIME;
+ if (irb->scsw.cc == 3) {
+ CIO_MSG_EVENT(2, "NOP - Device %04x on Subchannel 0.%x.%04x,"
+ " lpm %02X, became 'not operational'\n",
+ cdev->private->devno, sch->schid.ssid,
+ sch->schid.sch_no, cdev->private->imask);
+ return -EACCES;
+ }
+ return 0;
+}
+
static void
__ccw_device_verify_start(struct ccw_device *cdev)
{
if ((sch->vpm & imask) != (sch->lpm & imask))
break;
cdev->private->imask = imask;
- func = (sch->vpm & imask) ?
- SPID_FUNC_RESIGN : SPID_FUNC_ESTABLISH;
- ret = __ccw_device_do_pgid(cdev, func);
+ if (cdev->private->options.pgroup) {
+ func = (sch->vpm & imask) ?
+ SPID_FUNC_RESIGN : SPID_FUNC_ESTABLISH;
+ ret = __ccw_device_do_pgid(cdev, func);
+ } else
+ ret = __ccw_device_do_nop(cdev);
if (ret == 0 || ret == -EBUSY)
return;
cdev->private->iretry = 5;
if (ccw_device_accumulate_and_sense(cdev, irb) != 0)
return;
sch = to_subchannel(cdev->dev.parent);
- ret = __ccw_device_check_pgid(cdev);
+ if (cdev->private->options.pgroup)
+ ret = __ccw_device_check_pgid(cdev);
+ else
+ ret = __ccw_device_check_nop(cdev);
memset(&cdev->private->irb, 0, sizeof(struct irb));
switch (ret) {
/* 0, -ETIME, -EAGAIN, -EOPNOTSUPP or -EACCES */
* One of those strange devices which claim to be able
* to do multipathing but not for Set Path Group ID.
*/
- if (cdev->private->flags.pgid_single) {
- ccw_device_verify_done(cdev, -EOPNOTSUPP);
- break;
- }
- cdev->private->flags.pgid_single = 1;
+ if (cdev->private->flags.pgid_single)
+ cdev->private->options.pgroup = 0;
+ else
+ cdev->private->flags.pgid_single = 1;
/* fall through. */
case -EAGAIN: /* Try again. */
__ccw_device_verify_start(cdev);
sch->schib.pmcw.pnom);
sch->lpm &= ~sch->schib.pmcw.pnom;
- if (cdev->private->options.pgroup)
- cdev->private->flags.doverify = 1;
+ cdev->private->flags.doverify = 1;
}
/*
cdev_irb->esw.esw0.erw.auth = irb->esw.esw0.erw.auth;
/* Copy path verification required flag. */
cdev_irb->esw.esw0.erw.pvrf = irb->esw.esw0.erw.pvrf;
- if (irb->esw.esw0.erw.pvrf && cdev->private->options.pgroup)
+ if (irb->esw.esw0.erw.pvrf)
cdev->private->flags.doverify = 1;
/* Copy concurrent sense bit. */
cdev_irb->esw.esw0.erw.cons = irb->esw.esw0.erw.cons;
}
/* Check if path verification is required. */
if (ccw_device_accumulate_esw_valid(irb) &&
- irb->esw.esw0.erw.pvrf && cdev->private->options.pgroup)
+ irb->esw.esw0.erw.pvrf)
cdev->private->flags.doverify = 1;
}
QDIO_DBF_TEXT1(0,trace,dbf_text);
QDIO_DBF_TEXT0(0,setup,dbf_text);
- cdev->private->qdio_data = 0;
+ cdev->private->qdio_data = NULL;
up(&irq_ptr->setting_up_sema);
printk(KERN_INFO "%s:%s Enter \n",dev->name,__FUNCTION__);
#endif
CLAW_DBF_TEXT(4,trace,"open");
- if (!dev | (dev->name[0] == 0x00)) {
+ if (!dev || (dev->name[0] == 0x00)) {
CLAW_DBF_TEXT(2,trace,"BadDev");
printk(KERN_WARNING "claw: Bad device at open failing \n");
return -ENODEV;
static int
ctc_add_attributes(struct device *dev)
{
- device_create_file(dev, &dev_attr_loglevel);
- device_create_file(dev, &dev_attr_stats);
- return 0;
+ int rc;
+
+ rc = device_create_file(dev, &dev_attr_loglevel);
+ if (rc)
+ goto out;
+ rc = device_create_file(dev, &dev_attr_stats);
+ if (!rc)
+ goto out;
+ device_remove_file(dev, &dev_attr_loglevel);
+out:
+ return rc;
}
static void
goto out;
}
- ctc_add_attributes(&cgdev->dev);
+ if (ctc_add_attributes(&cgdev->dev)) {
+ ctc_netdev_unregister(dev);
+ dev->priv = NULL;
+ ctc_free_netdevice(dev, 1);
+ goto out;
+ }
strlcpy(privptr->fsm->name, dev->name, sizeof (privptr->fsm->name));
iucv_debug(1, "entering");
if (iucv_cpuid != -1) {
smp_call_function_on(iucv_retrieve_buffer_cpuid,
- 0, 0, 1, iucv_cpuid);
+ NULL, 0, 1, iucv_cpuid);
/* Release the cpu reserved by iucv_declare_buffer. */
smp_put_cpu(iucv_cpuid);
iucv_cpuid = -1;
count = IFNAMSIZ-1;
for (i=0, p=(char *)buf; i<count && *p; i++, p++) {
- if ((*p == '\n') | (*p == ' ')) {
+ if ((*p == '\n') || (*p == ' ')) {
/* trailing lf, grr */
break;
} else {
enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
struct qeth_eddp_context *ctx = NULL;
int tx_bytes = skb->len;
+#ifdef CONFIG_QETH_PERF_STATS
unsigned short nr_frags = skb_shinfo(skb)->nr_frags;
unsigned short tso_size = skb_shinfo(skb)->gso_size;
+#endif
int rc;
QETH_DBF_TEXT(trace, 6, "sendpkt");
queue = card->qdio.out_qs
[qeth_get_priority_queue(card, skb, ipv, cast_type)];
- if (skb_shinfo(skb)->gso_size)
+ if (skb_is_gso(skb))
large_send = card->options.large_send;
/*are we able to do TSO ? If so ,prepare and send it from here */
qeth_get_setassparms_cmd(struct qeth_card *, enum qeth_ipa_funcs,
__u16, __u16, enum qeth_prot_versions);
static int
-qeth_arp_query(struct qeth_card *card, char *udata)
+qeth_arp_query(struct qeth_card *card, char __user *udata)
{
struct qeth_cmd_buffer *iob;
struct qeth_arp_query_info qinfo = {0, };
* function to send SNMP commands to OSA-E card
*/
static int
-qeth_snmp_command(struct qeth_card *card, char *udata)
+qeth_snmp_command(struct qeth_card *card, char __user *udata)
{
struct qeth_cmd_buffer *iob;
struct qeth_ipa_cmd *cmd;
}
static struct ccw_device_id qeth_ids[] = {
- {CCW_DEVICE(0x1731, 0x01), driver_info:QETH_CARD_TYPE_OSAE},
- {CCW_DEVICE(0x1731, 0x05), driver_info:QETH_CARD_TYPE_IQD},
- {CCW_DEVICE(0x1731, 0x06), driver_info:QETH_CARD_TYPE_OSN},
+ {CCW_DEVICE(0x1731, 0x01), .driver_info = QETH_CARD_TYPE_OSAE},
+ {CCW_DEVICE(0x1731, 0x05), .driver_info = QETH_CARD_TYPE_IQD},
+ {CCW_DEVICE(0x1731, 0x06), .driver_info = QETH_CARD_TYPE_OSN},
{},
};
MODULE_DEVICE_TABLE(ccw, qeth_ids);
static struct notifier_block qeth_ip_notifier = {
qeth_ip_event,
- 0
+ NULL,
};
#ifdef CONFIG_QETH_IPV6
static struct notifier_block qeth_ip6_notifier = {
qeth_ip6_event,
- 0
+ NULL,
};
#endif
static int
qeth_reboot_event(struct notifier_block *this, unsigned long event, void *ptr)
{
+ int ret;
- driver_for_each_device(&qeth_ccwgroup_driver.driver, NULL, NULL,
- __qeth_reboot_event_card);
- return NOTIFY_DONE;
+ ret = driver_for_each_device(&qeth_ccwgroup_driver.driver, NULL, NULL,
+ __qeth_reboot_event_card);
+ return ret ? NOTIFY_BAD : NOTIFY_DONE;
}
static struct notifier_block qeth_reboot_notifier = {
qeth_reboot_event,
- 0
+ NULL,
};
static int
}
-static DRIVER_ATTR(group, 0200, 0, qeth_driver_group_store);
+static DRIVER_ATTR(group, 0200, NULL, qeth_driver_group_store);
static ssize_t
qeth_driver_notifier_register_store(struct device_driver *ddrv, const char *buf,
return count;
}
-static DRIVER_ATTR(notifier_register, 0200, 0,
+static DRIVER_ATTR(notifier_register, 0200, NULL,
qeth_driver_notifier_register_store);
int
return;
}
rc = iucv_receive(eib->ippathid, eib->ipmsgid, eib->iptrgcls,
- msg, len, 0, 0, 0);
+ msg, len, NULL, NULL, NULL);
if (rc == 0) {
msg[len] = 0;
EBCASC(msg, len);
struct smsg_callback *cb, *tmp;
spin_lock(&smsg_list_lock);
- cb = 0;
+ cb = NULL;
list_for_each_entry(tmp, &smsg_list, list)
if (tmp->callback == callback &&
strcmp(tmp->prefix, prefix) == 0) {
{
if (smsg_handle > 0) {
cpcmd("SET SMSG OFF", NULL, 0, NULL);
- iucv_sever(smsg_pathid, 0);
+ iucv_sever(smsg_pathid, NULL);
iucv_unregister_program(smsg_handle);
driver_unregister(&smsg_driver);
}
return rc;
}
smsg_handle = iucv_register_program("SMSGIUCV ", "*MSG ",
- pgmmask, &smsg_ops, 0);
+ pgmmask, &smsg_ops, NULL);
if (!smsg_handle) {
printk(KERN_ERR "SMSGIUCV: failed to register to iucv");
driver_unregister(&smsg_driver);
return -EIO; /* better errno ? */
}
- rc = iucv_connect (&smsg_pathid, 255, 0, "*MSG ", 0, 0, 0, 0,
- smsg_handle, 0);
+ rc = iucv_connect (&smsg_pathid, 255, NULL, "*MSG ", NULL, 0,
+ NULL, NULL, smsg_handle, NULL);
if (rc) {
printk(KERN_ERR "SMSGIUCV: failed to connect to *MSG");
iucv_unregister_program(smsg_handle);
driver_unregister(&smsg_driver);
- smsg_handle = 0;
+ smsg_handle = NULL;
return -EIO;
}
cpcmd("SET SMSG IUCV", NULL, 0, NULL);
break;
case CRW_RSC_CPATH:
pr_debug("source is channel path %02X\n", crw[0].rsid);
+ /*
+ * Check for solicited machine checks. These are
+ * created by reset channel path and need not be
+ * reported to the common I/O layer.
+ */
+ if (crw[chain].slct) {
+ DBG(KERN_INFO"solicited machine check for "
+ "channel path %02X\n", crw[0].rsid);
+ break;
+ }
switch (crw[0].erc) {
case CRW_ERC_IPARM: /* Path has come. */
ret = chp_process_crw(crw[0].rsid, 1);
/* setup new FSF request */
retval = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA,
erp_action ? ZFCP_REQ_AUTO_CLEANUP : 0,
- 0, &lock_flags, &fsf_req);
+ NULL, &lock_flags, &fsf_req);
if (retval < 0) {
ZFCP_LOG_INFO("error: Out of resources. Could not create an "
"exchange port data request for"
struct zfcp_data zfcp_data = {
.scsi_host_template = {
- name: ZFCP_NAME,
- proc_name: "zfcp",
- proc_info: NULL,
- detect: NULL,
- slave_alloc: zfcp_scsi_slave_alloc,
- slave_configure: zfcp_scsi_slave_configure,
- slave_destroy: zfcp_scsi_slave_destroy,
- queuecommand: zfcp_scsi_queuecommand,
- eh_abort_handler: zfcp_scsi_eh_abort_handler,
- eh_device_reset_handler: zfcp_scsi_eh_device_reset_handler,
- eh_bus_reset_handler: zfcp_scsi_eh_bus_reset_handler,
- eh_host_reset_handler: zfcp_scsi_eh_host_reset_handler,
- /* FIXME(openfcp): Tune */
- can_queue: 4096,
- this_id: -1,
- /*
- * FIXME:
- * one less? can zfcp_create_sbale cope with it?
- */
- sg_tablesize: ZFCP_MAX_SBALES_PER_REQ,
- cmd_per_lun: 1,
- unchecked_isa_dma: 0,
- use_clustering: 1,
- sdev_attrs: zfcp_sysfs_sdev_attrs,
+ .name = ZFCP_NAME,
+ .proc_name = "zfcp",
+ .proc_info = NULL,
+ .detect = NULL,
+ .slave_alloc = zfcp_scsi_slave_alloc,
+ .slave_configure = zfcp_scsi_slave_configure,
+ .slave_destroy = zfcp_scsi_slave_destroy,
+ .queuecommand = zfcp_scsi_queuecommand,
+ .eh_abort_handler = zfcp_scsi_eh_abort_handler,
+ .eh_device_reset_handler = zfcp_scsi_eh_device_reset_handler,
+ .eh_bus_reset_handler = zfcp_scsi_eh_bus_reset_handler,
+ .eh_host_reset_handler = zfcp_scsi_eh_host_reset_handler,
+ .can_queue = 4096,
+ .this_id = -1,
+ /*
+ * FIXME:
+ * one less? can zfcp_create_sbale cope with it?
+ */
+ .sg_tablesize = ZFCP_MAX_SBALES_PER_REQ,
+ .cmd_per_lun = 1,
+ .unchecked_isa_dma = 0,
+ .use_clustering = 1,
+ .sdev_attrs = zfcp_sysfs_sdev_attrs,
},
.driver_version = ZFCP_VERSION,
/* rest initialised with zeros */
#endif
/********************************** Misc Macros *******************************/
-#define roundup(x, y) ((((x)+((y)-1))/(y))*(y))
#define powerof2(x) ((((x)-1)&(x))==0)
/************************* Forward Declarations *******************************/
PIIX_FLAG_SCR = (1 << 26), /* SCR available */
PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */
PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */
- PIIX_FLAG_COMBINED = (1 << 29), /* combined mode possible */
- /* ICH6/7 use different scheme for map value */
- PIIX_FLAG_COMBINED_ICH6 = PIIX_FLAG_COMBINED | (1 << 30),
/* combined mode. if set, PATA is channel 0.
* if clear, PATA is channel 1.
ich6_sata = 4,
ich6_sata_ahci = 5,
ich6m_sata_ahci = 6,
+ ich8_sata_ahci = 7,
/* constants for mapping table */
P0 = 0, /* port 0 */
struct piix_map_db {
const u32 mask;
+ const u16 port_enable;
+ const int present_shift;
const int map[][4];
};
+struct piix_host_priv {
+ const int *map;
+ const struct piix_map_db *map_db;
+};
+
static int piix_init_one (struct pci_dev *pdev,
const struct pci_device_id *ent);
+static void piix_host_stop(struct ata_host_set *host_set);
static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev);
static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev);
static void piix_pata_error_handler(struct ata_port *ap);
/* Enterprise Southbridge 2 (where's the datasheet?) */
{ 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
/* SATA Controller 1 IDE (ICH8, no datasheet yet) */
- { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+ { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
/* SATA Controller 2 IDE (ICH8, ditto) */
- { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+ { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
/* Mobile SATA Controller IDE (ICH8M, ditto) */
- { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
+ { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
{ } /* terminate list */
};
.port_start = ata_port_start,
.port_stop = ata_port_stop,
- .host_stop = ata_host_stop,
+ .host_stop = piix_host_stop,
};
static const struct ata_port_operations piix_sata_ops = {
.port_start = ata_port_start,
.port_stop = ata_port_stop,
- .host_stop = ata_host_stop,
+ .host_stop = piix_host_stop,
};
-static struct piix_map_db ich5_map_db = {
+static const struct piix_map_db ich5_map_db = {
.mask = 0x7,
+ .port_enable = 0x3,
+ .present_shift = 4,
.map = {
/* PM PS SM SS MAP */
{ P0, NA, P1, NA }, /* 000b */
},
};
-static struct piix_map_db ich6_map_db = {
+static const struct piix_map_db ich6_map_db = {
.mask = 0x3,
+ .port_enable = 0xf,
+ .present_shift = 4,
.map = {
/* PM PS SM SS MAP */
{ P0, P2, P1, P3 }, /* 00b */
},
};
-static struct piix_map_db ich6m_map_db = {
+static const struct piix_map_db ich6m_map_db = {
.mask = 0x3,
+ .port_enable = 0x5,
+ .present_shift = 4,
.map = {
/* PM PS SM SS MAP */
{ P0, P2, RV, RV }, /* 00b */
},
};
+static const struct piix_map_db ich8_map_db = {
+ .mask = 0x3,
+ .port_enable = 0x3,
+ .present_shift = 8,
+ .map = {
+ /* PM PS SM SS MAP */
+ { P0, NA, P1, NA }, /* 00b (hardwired) */
+ { RV, RV, RV, RV },
+ { RV, RV, RV, RV }, /* 10b (never) */
+ { RV, RV, RV, RV },
+ },
+};
+
+static const struct piix_map_db *piix_map_db_table[] = {
+ [ich5_sata] = &ich5_map_db,
+ [esb_sata] = &ich5_map_db,
+ [ich6_sata] = &ich6_map_db,
+ [ich6_sata_ahci] = &ich6_map_db,
+ [ich6m_sata_ahci] = &ich6m_map_db,
+ [ich8_sata_ahci] = &ich8_map_db,
+};
+
static struct ata_port_info piix_port_info[] = {
/* piix4_pata */
{
/* ich5_sata */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED |
- PIIX_FLAG_CHECKINTR,
+ .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 */
.port_ops = &piix_sata_ops,
- .private_data = &ich5_map_db,
},
/* i6300esb_sata */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED |
+ .host_flags = ATA_FLAG_SATA |
PIIX_FLAG_CHECKINTR | PIIX_FLAG_IGNORE_PCS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 */
.port_ops = &piix_sata_ops,
- .private_data = &ich5_map_db,
},
/* ich6_sata */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 |
+ .host_flags = ATA_FLAG_SATA |
PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 */
.port_ops = &piix_sata_ops,
- .private_data = &ich6_map_db,
},
/* ich6_sata_ahci */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 |
+ .host_flags = ATA_FLAG_SATA |
PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR |
PIIX_FLAG_AHCI,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 */
.port_ops = &piix_sata_ops,
- .private_data = &ich6_map_db,
},
/* ich6m_sata_ahci */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 |
+ .host_flags = ATA_FLAG_SATA |
+ PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR |
+ PIIX_FLAG_AHCI,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x7f, /* udma0-6 */
+ .port_ops = &piix_sata_ops,
+ },
+
+ /* ich8_sata_ahci */
+ {
+ .sht = &piix_sht,
+ .host_flags = ATA_FLAG_SATA |
PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR |
PIIX_FLAG_AHCI,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 */
.port_ops = &piix_sata_ops,
- .private_data = &ich6m_map_db,
},
};
static int piix_sata_prereset(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- const unsigned int *map = ap->host_set->private_data;
+ struct piix_host_priv *hpriv = ap->host_set->private_data;
+ const unsigned int *map = hpriv->map;
int base = 2 * ap->hard_port_no;
- unsigned int present_mask = 0;
+ unsigned int present = 0;
int port, i;
- u8 pcs;
+ u16 pcs;
- pci_read_config_byte(pdev, ICH5_PCS, &pcs);
+ pci_read_config_word(pdev, ICH5_PCS, &pcs);
DPRINTK("ata%u: ENTER, pcs=0x%x base=%d\n", ap->id, pcs, base);
- /* enable all ports on this ap and wait for them to settle */
- for (i = 0; i < 2; i++) {
- port = map[base + i];
- if (port >= 0)
- pcs |= 1 << port;
- }
-
- pci_write_config_byte(pdev, ICH5_PCS, pcs);
- msleep(100);
-
- /* let's see which devices are present */
- pci_read_config_byte(pdev, ICH5_PCS, &pcs);
-
for (i = 0; i < 2; i++) {
port = map[base + i];
if (port < 0)
continue;
- if (ap->flags & PIIX_FLAG_IGNORE_PCS || pcs & 1 << (4 + port))
- present_mask |= 1 << i;
- else
- pcs &= ~(1 << port);
+ if ((ap->flags & PIIX_FLAG_IGNORE_PCS) ||
+ (pcs & 1 << (hpriv->map_db->present_shift + port)))
+ present = 1;
}
- /* disable offline ports on non-AHCI controllers */
- if (!(ap->flags & PIIX_FLAG_AHCI))
- pci_write_config_byte(pdev, ICH5_PCS, pcs);
-
DPRINTK("ata%u: LEAVE, pcs=0x%x present_mask=0x%x\n",
ap->id, pcs, present_mask);
- if (!present_mask) {
+ if (!present) {
ata_port_printk(ap, KERN_INFO, "SATA port has no device.\n");
ap->eh_context.i.action &= ~ATA_EH_RESET_MASK;
return 0;
return no_piix_dma;
}
+static void __devinit piix_init_pcs(struct pci_dev *pdev,
+ const struct piix_map_db *map_db)
+{
+ u16 pcs, new_pcs;
+
+ pci_read_config_word(pdev, ICH5_PCS, &pcs);
+
+ new_pcs = pcs | map_db->port_enable;
+
+ if (new_pcs != pcs) {
+ DPRINTK("updating PCS from 0x%x to 0x%x\n", pcs, new_pcs);
+ pci_write_config_word(pdev, ICH5_PCS, new_pcs);
+ msleep(150);
+ }
+}
+
static void __devinit piix_init_sata_map(struct pci_dev *pdev,
- struct ata_port_info *pinfo)
+ struct ata_port_info *pinfo,
+ const struct piix_map_db *map_db)
{
- struct piix_map_db *map_db = pinfo[0].private_data;
+ struct piix_host_priv *hpriv = pinfo[0].private_data;
const unsigned int *map;
int i, invalid_map = 0;
u8 map_value;
dev_printk(KERN_ERR, &pdev->dev,
"invalid MAP value %u\n", map_value);
- pinfo[0].private_data = (void *)map;
- pinfo[1].private_data = (void *)map;
+ hpriv->map = map;
+ hpriv->map_db = map_db;
}
/**
static int printed_version;
struct ata_port_info port_info[2];
struct ata_port_info *ppinfo[2] = { &port_info[0], &port_info[1] };
+ struct piix_host_priv *hpriv;
unsigned long host_flags;
if (!printed_version++)
if (!in_module_init)
return -ENODEV;
+ hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL);
+ if (!hpriv)
+ return -ENOMEM;
+
port_info[0] = piix_port_info[ent->driver_data];
port_info[1] = piix_port_info[ent->driver_data];
+ port_info[0].private_data = hpriv;
+ port_info[1].private_data = hpriv;
host_flags = port_info[0].host_flags;
}
/* Initialize SATA map */
- if (host_flags & ATA_FLAG_SATA)
- piix_init_sata_map(pdev, port_info);
+ if (host_flags & ATA_FLAG_SATA) {
+ piix_init_sata_map(pdev, port_info,
+ piix_map_db_table[ent->driver_data]);
+ piix_init_pcs(pdev, piix_map_db_table[ent->driver_data]);
+ }
/* On ICH5, some BIOSen disable the interrupt using the
* PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3.
return ata_pci_init_one(pdev, ppinfo, 2);
}
+static void piix_host_stop(struct ata_host_set *host_set)
+{
+ if (host_set->next == NULL)
+ kfree(host_set->private_data);
+ ata_host_stop(host_set);
+}
+
static int __init piix_init(void)
{
int rc;
static unsigned int serial_in(struct uart_8250_port *up, int offset)
{
+ unsigned int tmp;
offset = map_8250_in_reg(up, offset) << up->port.regshift;
switch (up->port.iotype) {
return __raw_readl(up->port.membase + offset);
#endif
+ case UPIO_TSI:
+ if (offset == UART_IIR) {
+ tmp = readl((u32 *)(up->port.membase + UART_RX));
+ return (cpu_to_le32(tmp) >> 8) & 0xff;
+ } else
+ return readb(up->port.membase + offset);
+
default:
return inb(up->port.iobase + offset);
}
__raw_writel(value, up->port.membase + offset);
break;
#endif
+ case UPIO_TSI:
+ if (!((offset == UART_IER) && (value & UART_IER_UUE)))
+ writeb(value, up->port.membase + offset);
+ break;
default:
outb(value, up->port.iobase + offset);
touch_nmi_watchdog();
- if (oops_in_progress) {
- locked = spin_trylock_irqsave(&up->port.lock, flags);
+ local_irq_save(flags);
+ if (up->port.sysrq) {
+ /* serial8250_handle_port() already took the lock */
+ locked = 0;
+ } else if (oops_in_progress) {
+ locked = spin_trylock(&up->port.lock);
} else
- spin_lock_irqsave(&up->port.lock, flags);
+ spin_lock(&up->port.lock);
/*
* First save the IER then disable the interrupts
serial_out(up, UART_IER, ier);
if (locked)
- spin_unlock_irqrestore(&up->port.lock, flags);
+ spin_unlock(&up->port.lock);
+ local_irq_restore(flags);
}
static int serial8250_console_setup(struct console *co, char *options)
}
#ifdef CONFIG_SERIAL_DZ_CONSOLE
-static void dz_console_putchar(struct uart_port *port, int ch)
+static void dz_console_putchar(struct uart_port *uport, int ch)
{
struct dz_port *dport = (struct dz_port *)uport;
unsigned long flags;
up[(chip * 2) + 1].port.fifosize = 1;
up[(chip * 2) + 1].port.ops = &ip22zilog_pops;
up[(chip * 2) + 1].port.type = PORT_IP22ZILOG;
- up[(chip * 2) + 1].port.flags |= IP22ZILOG_FLAG_IS_CHANNEL_A;
up[(chip * 2) + 1].port.line = (chip * 2) + 1;
- up[(chip * 2) + 1].flags = 0;
+ up[(chip * 2) + 1].flags |= IP22ZILOG_FLAG_IS_CHANNEL_A;
}
}
case UPIO_MEM:
case UPIO_MEM32:
case UPIO_AU:
+ case UPIO_TSI:
snprintf(address, sizeof(address),
"MMIO 0x%lx", port->mapbase);
break;
if (err)
return err;
- err = sunsab_init_one(&up[0], op, 0,
+ err = sunsab_init_one(&up[1], op, 0,
(inst * 2) + 1);
if (err) {
of_iounmap(up[0].port.membase,
if (up->port.type == PORT_UNKNOWN)
return -ENODEV;
+ printk("%s: %s port at %lx, irq %u\n",
+ to_of_device(up->port.dev)->node->full_name,
+ (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse",
+ up->port.mapbase, up->port.irq);
+
#ifdef CONFIG_SERIO
serio = &up->serio;
serio->port_data = up;
struct device_node *dp = op->node;
struct uart_sunsu_port *up;
struct resource *rp;
+ enum su_type type;
int err;
- if (inst >= UART_NR)
- return -EINVAL;
+ type = su_get_type(dp);
+ if (type == SU_PORT_PORT) {
+ if (inst >= UART_NR)
+ return -EINVAL;
+ up = &sunsu_ports[inst];
+ } else {
+ up = kzalloc(sizeof(*up), GFP_KERNEL);
+ if (!up)
+ return -ENOMEM;
+ }
- up = &sunsu_ports[inst];
up->port.line = inst;
spin_lock_init(&up->port.lock);
- up->su_type = su_get_type(dp);
+ up->su_type = type;
rp = &op->resource[0];
- up->port.mapbase = op->resource[0].start;
-
+ up->port.mapbase = rp->start;
up->reg_size = (rp->end - rp->start) + 1;
up->port.membase = of_ioremap(rp, 0, up->reg_size, "su");
- if (!up->port.membase)
+ if (!up->port.membase) {
+ if (type != SU_PORT_PORT)
+ kfree(up);
return -ENOMEM;
+ }
up->port.irq = op->irqs[0];
err = 0;
if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) {
err = sunsu_kbd_ms_init(up);
- if (err)
+ if (err) {
+ kfree(up);
goto out_unmap;
+ }
+ dev_set_drvdata(&op->dev, up);
return 0;
}
#ifdef CONFIG_SERIO
serio_unregister_port(&up->serio);
#endif
- } else if (up->port.type != PORT_UNKNOWN)
+ kfree(up);
+ } else if (up->port.type != PORT_UNKNOWN) {
uart_remove_one_port(&sunsu_reg, &up->port);
+ }
+
+ dev_set_drvdata(&dev->dev, NULL);
return 0;
}
#include <linux/tty_flip.h>
#include <asm/io.h>
+#include <asm/vr41xx/irq.h>
#include <asm/vr41xx/siu.h>
#include <asm/vr41xx/vr41xx.h>
default y if ARCH_LH7A404
default y if ARCH_S3C2410
default y if PXA27x
+ default y if ARCH_EP93XX
default y if ARCH_AT91RM9200
# PPC:
default y if STB03xxx
obj-$(CONFIG_USB_SERIAL) += serial/
obj-$(CONFIG_USB_AUERSWALD) += misc/
-obj-$(CONFIG_USB_CY7C63) += misc/
+obj-$(CONFIG_USB_CYPRESS_CY7C63)+= misc/
obj-$(CONFIG_USB_CYTHERM) += misc/
obj-$(CONFIG_USB_EMI26) += misc/
obj-$(CONFIG_USB_EMI62) += misc/
struct acm_ru *rcv = urb->context;
struct acm *acm = rcv->instance;
int status = urb->status;
- dbg("Entering acm_read_bulk with status %d\n", urb->status);
+ dbg("Entering acm_read_bulk with status %d", urb->status);
if (!ACM_READY(acm))
return;
if (status)
- dev_dbg(&acm->data->dev, "bulk rx status %d\n", status);
+ dev_dbg(&acm->data->dev, "bulk rx status %d", status);
buf = rcv->buffer;
buf->size = urb->actual_length;
list_del(&buf->list);
spin_unlock(&acm->read_lock);
- dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d\n", buf, buf->size);
+ dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d", buf, buf->size);
tty_buffer_request_room(tty, buf->size);
if (!acm->throttle)
rcv->urb->transfer_dma = buf->dma;
rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- dbg("acm_rx_tasklet: sending urb 0x%p, rcv 0x%p, buf 0x%p\n", rcv->urb, rcv, buf);
+ dbg("acm_rx_tasklet: sending urb 0x%p, rcv 0x%p, buf 0x%p", rcv->urb, rcv, buf);
/* This shouldn't kill the driver as unsuccessful URBs are returned to the
free-urbs-pool and resubmited ASAP */
{
struct acm *acm = (struct acm *)urb->context;
- dbg("Entering acm_write_bulk with status %d\n", urb->status);
+ dbg("Entering acm_write_bulk with status %d", urb->status);
acm_write_done(acm);
acm_write_start(acm);
static void acm_softint(void *private)
{
struct acm *acm = private;
- dbg("Entering acm_softint.\n");
+ dbg("Entering acm_softint.");
if (!ACM_READY(acm))
return;
struct acm *acm;
int rv = -EINVAL;
int i;
- dbg("Entering acm_tty_open.\n");
+ dbg("Entering acm_tty_open.");
mutex_lock(&open_mutex);
int wbn;
struct acm_wb *wb;
- dbg("Entering acm_tty_write to write %d bytes,\n", count);
+ dbg("Entering acm_tty_write to write %d bytes,", count);
if (!ACM_READY(acm))
return -EINVAL;
if (!buflen) {
if (intf->cur_altsetting->endpoint->extralen && intf->cur_altsetting->endpoint->extra) {
- dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint\n");
+ dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint");
buflen = intf->cur_altsetting->endpoint->extralen;
buffer = intf->cur_altsetting->endpoint->extra;
} else {
if (!union_header) {
if (call_interface_num > 0) {
- dev_dbg(&intf->dev,"No union descriptor, using call management descriptor\n");
+ dev_dbg(&intf->dev,"No union descriptor, using call management descriptor");
data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num));
control_interface = intf;
} else {
- dev_dbg(&intf->dev,"No union descriptor, giving up\n");
+ dev_dbg(&intf->dev,"No union descriptor, giving up");
return -ENODEV;
}
} else {
control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0));
if (!control_interface || !data_interface) {
- dev_dbg(&intf->dev,"no interfaces\n");
+ dev_dbg(&intf->dev,"no interfaces");
return -ENODEV;
}
}
if (data_interface_num != call_interface_num)
- dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.\n");
+ dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.");
skip_normal_probe:
if (data_interface->cur_altsetting->desc.bInterfaceClass != CDC_DATA_INTERFACE_TYPE) {
if (control_interface->cur_altsetting->desc.bInterfaceClass == CDC_DATA_INTERFACE_TYPE) {
struct usb_interface *t;
- dev_dbg(&intf->dev,"Your device has switched interfaces.\n");
+ dev_dbg(&intf->dev,"Your device has switched interfaces.");
t = control_interface;
control_interface = data_interface;
}
if (usb_interface_claimed(data_interface)) { /* valid in this context */
- dev_dbg(&intf->dev,"The data interface isn't available\n");
+ dev_dbg(&intf->dev,"The data interface isn't available");
return -EBUSY;
}
if ((epread->bEndpointAddress & USB_DIR_IN) != USB_DIR_IN) {
/* descriptors are swapped */
struct usb_endpoint_descriptor *t;
- dev_dbg(&intf->dev,"The data interface has switched endpoints\n");
+ dev_dbg(&intf->dev,"The data interface has switched endpoints");
t = epread;
epread = epwrite;
}
if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) {
- dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n");
+ dev_dbg(&intf->dev, "out of memory (acm kzalloc)");
goto alloc_fail;
}
buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
if (!buf) {
- dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)\n");
+ dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)");
goto alloc_fail2;
}
acm->ctrl_buffer = buf;
if (acm_write_buffers_alloc(acm) < 0) {
- dev_dbg(&intf->dev, "out of memory (write buffer alloc)\n");
+ dev_dbg(&intf->dev, "out of memory (write buffer alloc)");
goto alloc_fail4;
}
acm->ctrlurb = usb_alloc_urb(0, GFP_KERNEL);
if (!acm->ctrlurb) {
- dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)\n");
+ dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)");
goto alloc_fail5;
}
for (i = 0; i < num_rx_buf; i++) {
struct acm_ru *rcv = &(acm->ru[i]);
if (!(rcv->urb = usb_alloc_urb(0, GFP_KERNEL))) {
- dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)\n");
+ dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)");
goto alloc_fail7;
}
struct acm_rb *buf = &(acm->rb[i]);
if (!(buf->base = usb_buffer_alloc(acm->dev, readsize, GFP_KERNEL, &buf->dma))) {
- dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n");
+ dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)");
goto alloc_fail7;
}
}
acm->writeurb = usb_alloc_urb(0, GFP_KERNEL);
if (!acm->writeurb) {
- dev_dbg(&intf->dev, "out of memory (writeurb kmalloc)\n");
+ dev_dbg(&intf->dev, "out of memory (writeurb kmalloc)");
goto alloc_fail7;
}
{ USB_DEVICE(0x0ace, 0x1608), /* ZyDAS 56K USB MODEM */
.driver_info = SINGLE_RX_URB, /* firmware bug */
},
+ { USB_DEVICE(0x0ace, 0x1611), /* ZyDAS 56K USB MODEM - new version */
+ .driver_info = SINGLE_RX_URB, /* firmware bug */
+ },
/* control interfaces with various AT-command sets */
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
USB_CDC_ACM_PROTO_AT_V25TER) },
For the format of the various /proc/bus/usb/ files, please read
<file:Documentation/usb/proc_usb_info.txt>.
- Please note that this code is completely unrelated to devfs, the
- "/dev file system support".
-
Most users want to say Y here.
config USB_BANDWIDTH
* and device drivers will know about any resume quirks.
*/
status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
- if (status < 2)
+ if (status >= 0)
+ status = (status == 2 ? 0 : -ENODEV);
+
+ if (status)
dev_dbg(&udev->dev,
"gone after usb resume? status %d\n",
status);
dev_dbg(hub->intfdev,
"port %d status %04x.%04x after resume, %d\n",
port1, portchange, devstatus, status);
+ if (status >= 0)
+ status = -ENODEV;
} else {
+ if (portchange & USB_PORT_STAT_C_SUSPEND)
+ clear_port_feature(hub->hdev, port1,
+ USB_PORT_FEAT_C_SUSPEND);
/* TRSMRCY = 10 msec */
msleep(10);
if (udev)
wake_up_all(&ds->wait);
list_del_init(&ds->list);
if (ds->discsignr) {
- sinfo.si_signo = SIGPIPE;
+ sinfo.si_signo = ds->discsignr;
sinfo.si_errno = EPIPE;
sinfo.si_code = SI_ASYNCIO;
sinfo.si_addr = ds->disccontext;
/* we must assign addresses for configurable endpoints (like net2280) */
-static __initdata unsigned epnum;
+static __devinitdata unsigned epnum;
// #define MANY_ENDPOINTS
#ifdef MANY_ENDPOINTS
/* more than 15 configurable endpoints */
-static __initdata unsigned in_epnum;
+static __devinitdata unsigned in_epnum;
#endif
* NOTE: each endpoint is unidirectional, as specified by its USB
* descriptor; and isn't specific to a configuration or altsetting.
*/
-static int __init
+static int __devinit
ep_matches (
struct usb_gadget *gadget,
struct usb_ep *ep,
/* endpoint already claimed? */
if (0 != ep->driver_data)
return 0;
-
+
/* only support ep0 for portable CONTROL traffic */
type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
if (USB_ENDPOINT_XFER_CONTROL == type)
return 1;
}
-static struct usb_ep * __init
+static struct usb_ep * __devinit
find_ep (struct usb_gadget *gadget, const char *name)
{
struct usb_ep *ep;
*
* On failure, this returns a null endpoint descriptor.
*/
-struct usb_ep * __init usb_ep_autoconfig (
+struct usb_ep * __devinit usb_ep_autoconfig (
struct usb_gadget *gadget,
struct usb_endpoint_descriptor *desc
)
return ep;
}
- /* Second, look at endpoints until an unclaimed one looks usable */
+ /* Second, look at endpoints until an unclaimed one looks usable */
list_for_each_entry (ep, &gadget->ep_list, ep_list) {
if (ep_matches (gadget, ep, desc))
return ep;
* state such as ep->driver_data and the record of assigned endpoints
* used by usb_ep_autoconfig().
*/
-void __init usb_ep_autoconfig_reset (struct usb_gadget *gadget)
+void __devinit usb_ep_autoconfig_reset (struct usb_gadget *gadget)
{
struct usb_ep *ep;
}
-static void __exit
+static void /* __init_or_exit */
eth_unbind (struct usb_gadget *gadget)
{
struct eth_dev *dev = get_gadget_data (gadget);
set_gadget_data (gadget, NULL);
}
-static u8 __init nibble (unsigned char c)
+static u8 __devinit nibble (unsigned char c)
{
if (likely (isdigit (c)))
return c - '0';
return 0;
}
-static int __init get_ether_addr(const char *str, u8 *dev_addr)
+static int __devinit get_ether_addr(const char *str, u8 *dev_addr)
{
if (str) {
unsigned i;
return 1;
}
-static int __init
+static int __devinit
eth_bind (struct usb_gadget *gadget)
{
struct eth_dev *dev;
kref_put(&fsg->ref, fsg_release);
}
-static void __exit fsg_unbind(struct usb_gadget *gadget)
+static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
{
struct fsg_dev *fsg = get_gadget_data(gadget);
int i;
#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
-int __init rndis_init (void)
+int __devinit rndis_init (void)
{
u8 i;
int rndis_state (int configNr);
extern void rndis_set_host_mac (int configNr, const u8 *addr);
-int __init rndis_init (void);
+int __devinit rndis_init (void);
void rndis_exit (void);
#endif /* _LINUX_RNDIS_H */
* Called on module unload. Frees the control request and device
* structure.
*/
-static void __exit gs_unbind(struct usb_gadget *gadget)
+static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget)
{
struct gs_dev *dev = get_gadget_data(gadget);
/*-------------------------------------------------------------------------*/
-static void __exit
+static void /* __init_or_exit */
zero_unbind (struct usb_gadget *gadget)
{
struct zero_dev *dev = get_gadget_data (gadget);
#endif
#define USBH_DISABLE (USB_MCFG_EBMEN | USB_MCFG_EMEMEN)
-#endif /* Au1200 */
-
extern int usb_disabled(void);
/*-------------------------------------------------------------------------*/
/* Au1200 AB USB does not support coherent memory */
if (!(read_c0_prid() & 0xff)) {
- pr_info("%s: this is chip revision AB!\n", dev->dev.name);
+ pr_info("%s: this is chip revision AB!\n", dev->name);
pr_info("%s: update your board or re-configure the kernel\n",
- dev->dev.name);
+ dev->name);
return -ENODEV;
}
#endif
/*-------------------------------------------------------------------------*/
-static int ehci_hcd_au1xxx_drv_probe(struct device *dev)
+static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
{
- struct platform_device *pdev = to_platform_device(dev);
struct usb_hcd *hcd = NULL;
int ret;
return ret;
}
-static int ehci_hcd_au1xxx_drv_remove(struct device *dev)
+static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
usb_ehci_au1xxx_remove(hcd, pdev);
return 0;
}
*/
MODULE_ALIAS("au1xxx-ehci");
-/* FIXME use "struct platform_driver" */
-static struct device_driver ehci_hcd_au1xxx_driver = {
- .name = "au1xxx-ehci",
- .bus = &platform_bus_type,
+static struct platform_driver ehci_hcd_au1xxx_driver = {
.probe = ehci_hcd_au1xxx_drv_probe,
.remove = ehci_hcd_au1xxx_drv_remove,
/*.suspend = ehci_hcd_au1xxx_drv_suspend, */
/*.resume = ehci_hcd_au1xxx_drv_resume, */
+ .driver = {
+ .name = "au1xxx-ehci",
+ .bus = &platform_bus_type
+ }
};
writel (status | CMD_RUN, &ehci->regs->command);
while (i--) {
- status = readl (&ehci->regs->port_status [i]);
- if (status & PORT_OWNER)
+ int pstatus = readl (&ehci->regs->port_status [i]);
+
+ if (pstatus & PORT_OWNER)
continue;
- if (!(status & PORT_RESUME)
+ if (!(pstatus & PORT_RESUME)
|| ehci->reset_done [i] != 0)
continue;
#endif /* Au1200 */
+#ifndef CONFIG_SOC_AU1200
/* wait for reset complete (read register twice; see au1500 errata) */
while (au_readl(USB_HOST_CONFIG),
!(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD))
+#endif
udelay(1000);
printk(KERN_DEBUG __FILE__
": Clock to USB host has been enabled \n");
+#endif
}
static void au1xxx_stop_ohc(struct platform_device *dev)
/* Au1200 AB USB does not support coherent memory */
if (!(read_c0_prid() & 0xff)) {
pr_info("%s: this is chip revision AB !!\n",
- dev->dev.name);
+ dev->name);
pr_info("%s: update your board or re-configure the kernel\n",
- dev->dev.name);
+ dev->name);
return -ENODEV;
}
#endif
--- /dev/null
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ *
+ * Bus Glue for ep93xx.
+ *
+ * Written by Christopher Hoover <ch@hpl.hp.com>
+ * Based on fragments of previous driver by Russell King et al.
+ *
+ * Modified for LH7A404 from ohci-sa1111.c
+ * by Durgesh Pattamatta <pattamattad@sharpsec.com>
+ *
+ * Modified for pxa27x from ohci-lh7a404.c
+ * by Nick Bane <nick@cecomputing.co.uk> 26-8-2004
+ *
+ * Modified for ep93xx from ohci-pxa27x.c
+ * by Lennert Buytenhek <buytenh@wantstofly.org> 28-2-2006
+ * Based on an earlier driver by Ray Lehtiniemi
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/signal.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+
+static struct clk *usb_host_clock;
+
+static void ep93xx_start_hc(struct device *dev)
+{
+ clk_enable(usb_host_clock);
+}
+
+static void ep93xx_stop_hc(struct device *dev)
+{
+ clk_disable(usb_host_clock);
+}
+
+static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
+ struct platform_device *pdev)
+{
+ int retval;
+ struct usb_hcd *hcd;
+
+ if (pdev->resource[1].flags != IORESOURCE_IRQ) {
+ pr_debug("resource[1] is not IORESOURCE_IRQ");
+ return -ENOMEM;
+ }
+
+ hcd = usb_create_hcd(driver, &pdev->dev, "ep93xx");
+ if (hcd == NULL)
+ return -ENOMEM;
+
+ hcd->rsrc_start = pdev->resource[0].start;
+ hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+ usb_put_hcd(hcd);
+ retval = -EBUSY;
+ goto err1;
+ }
+
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (hcd->regs == NULL) {
+ pr_debug("ioremap failed");
+ retval = -ENOMEM;
+ goto err2;
+ }
+
+ usb_host_clock = clk_get(&pdev->dev, "usb_host");
+ ep93xx_start_hc(&pdev->dev);
+
+ ohci_hcd_init(hcd_to_ohci(hcd));
+
+ retval = usb_add_hcd(hcd, pdev->resource[1].start, SA_INTERRUPT);
+ if (retval == 0)
+ return retval;
+
+ ep93xx_stop_hc(&pdev->dev);
+ iounmap(hcd->regs);
+err2:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+ usb_put_hcd(hcd);
+
+ return retval;
+}
+
+static void usb_hcd_ep93xx_remove(struct usb_hcd *hcd,
+ struct platform_device *pdev)
+{
+ usb_remove_hcd(hcd);
+ ep93xx_stop_hc(&pdev->dev);
+ clk_put(usb_host_clock);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+}
+
+static int __devinit ohci_ep93xx_start(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int ret;
+
+ if ((ret = ohci_init(ohci)) < 0)
+ return ret;
+
+ if ((ret = ohci_run(ohci)) < 0) {
+ err("can't start %s", hcd->self.bus_name);
+ ohci_stop(hcd);
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct hc_driver ohci_ep93xx_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "EP93xx OHCI",
+ .hcd_priv_size = sizeof(struct ohci_hcd),
+ .irq = ohci_irq,
+ .flags = HCD_USB11 | HCD_MEMORY,
+ .start = ohci_ep93xx_start,
+ .stop = ohci_stop,
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+ .get_frame_number = ohci_get_frame,
+ .hub_status_data = ohci_hub_status_data,
+ .hub_control = ohci_hub_control,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
+ .start_port_reset = ohci_start_port_reset,
+};
+
+extern int usb_disabled(void);
+
+static int ohci_hcd_ep93xx_drv_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = -ENODEV;
+ if (!usb_disabled())
+ ret = usb_hcd_ep93xx_probe(&ohci_ep93xx_hc_driver, pdev);
+
+ return ret;
+}
+
+static int ohci_hcd_ep93xx_drv_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+ usb_hcd_ep93xx_remove(hcd, pdev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ohci_hcd_ep93xx_drv_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct ochi_hcd *ohci = hcd_to_ohci(hcd);
+
+ if (time_before(jiffies, ohci->next_statechange))
+ msleep(5);
+ ohci->next_statechange = jiffies;
+
+ ep93xx_stop_hc(&pdev->dev);
+ hcd->state = HC_STATE_SUSPENDED;
+ pdev->dev.power.power_state = PMSG_SUSPEND;
+
+ return 0;
+}
+
+static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int status;
+
+ if (time_before(jiffies, ohci->next_statechange))
+ msleep(5);
+ ohci->next_statechange = jiffies;
+
+ ep93xx_start_hc(&pdev->dev);
+ pdev->dev.power.power_state = PMSG_ON;
+ usb_hcd_resume_root_hub(hcd);
+
+ return 0;
+}
+#endif
+
+
+static struct platform_driver ohci_hcd_ep93xx_driver = {
+ .probe = ohci_hcd_ep93xx_drv_probe,
+ .remove = ohci_hcd_ep93xx_drv_remove,
+#ifdef CONFIG_PM
+ .suspend = ohci_hcd_ep93xx_drv_suspend,
+ .resume = ohci_hcd_ep93xx_drv_resume,
+#endif
+ .driver = {
+ .name = "ep93xx-ohci",
+ },
+};
+
+static int __init ohci_hcd_ep93xx_init(void)
+{
+ return platform_driver_register(&ohci_hcd_ep93xx_driver);
+}
+
+static void __exit ohci_hcd_ep93xx_cleanup(void)
+{
+ platform_driver_unregister(&ohci_hcd_ep93xx_driver);
+}
+
+module_init(ohci_hcd_ep93xx_init);
+module_exit(ohci_hcd_ep93xx_cleanup);
#include "ohci-pxa27x.c"
#endif
+#ifdef CONFIG_ARCH_EP93XX
+#include "ohci-ep93xx.c"
+#endif
+
#ifdef CONFIG_SOC_AU1X00
#include "ohci-au1xxx.c"
#endif
|| defined(CONFIG_ARCH_OMAP) \
|| defined (CONFIG_ARCH_LH7A404) \
|| defined (CONFIG_PXA27x) \
+ || defined (CONFIG_ARCH_EP93XX) \
|| defined (CONFIG_SOC_AU1X00) \
|| defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
|| defined (CONFIG_ARCH_AT91RM9200) \
break;
case GetHubStatus:
temp = roothub_status (ohci) & ~(RH_HS_CRWE | RH_HS_DRWE);
- *(__le32 *) buf = cpu_to_le32 (temp);
+ put_unaligned(cpu_to_le32 (temp), (__le32 *) buf);
break;
case GetPortStatus:
if (!wIndex || wIndex > ports)
goto error;
wIndex--;
temp = roothub_portstatus (ohci, wIndex);
- *(__le32 *) buf = cpu_to_le32 (temp);
+ put_unaligned(cpu_to_le32 (temp), (__le32 *) buf);
#ifndef OHCI_VERBOSE_DEBUG
if (*(u16*)(buf+2)) /* only if wPortChange is interesting */
static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
{
void __iomem *base;
- int wait_time;
- u32 control;
if (!mmio_resource_enabled(pdev, 0))
return;
/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
#ifndef __hppa__
- control = readl(base + OHCI_CONTROL);
+{
+ u32 control = readl(base + OHCI_CONTROL);
if (control & OHCI_CTRL_IR) {
- wait_time = 500; /* arbitrary; 5 seconds */
+ int wait_time = 500; /* arbitrary; 5 seconds */
writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
writel(OHCI_OCR, base + OHCI_CMDSTATUS);
while (wait_time > 0 &&
/* reset controller, preserving RWC */
writel(control & OHCI_CTRL_RWC, base + OHCI_CONTROL);
}
+}
#endif
/*
#define USB_DEVICE_ID_4_PHIDGETSERVO_20 0x8104
#define USB_DEVICE_ID_DUAL_USB_JOYPAD 0x8866
+#define USB_VENDOR_ID_WISEGROUP_LTD 0x6677
+#define USB_DEVICE_ID_SMARTJOY_DUAL_PLUS 0x8802
+
#define USB_VENDOR_ID_CODEMERCS 0x07c0
#define USB_DEVICE_ID_CODEMERCS_IOW40 0x1500
#define USB_DEVICE_ID_CODEMERCS_IOW24 0x1501
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
+ { USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SMARTJOY_DUAL_PLUS, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE, HID_QUIRK_MIGHTYMOUSE | HID_QUIRK_INVERT_HWHEEL },
{ USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK_7 },
To compile this driver as a module, choose M here: the
module will be called usbled.
-config USB_CY7C63
+config USB_CYPRESS_CY7C63
tristate "Cypress CY7C63xxx USB driver support"
depends on USB
help
Say Y here if you want to connect a Cypress CY7C63xxx
- micro controller to your computer's USB port. This driver
- supports the pre-programmed devices (incl. firmware) by
- AK Modul-Bus Computer GmbH.
+ micro controller to your computer's USB port. Currently this
+ driver supports the pre-programmed devices (incl. firmware)
+ by AK Modul-Bus Computer GmbH.
Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html
To compile this driver as a module, choose M here: the
- module will be called cy7c63.
+ module will be called cypress_cy7c63.
config USB_CYTHERM
tristate "Cypress USB thermometer driver support"
#
obj-$(CONFIG_USB_AUERSWALD) += auerswald.o
-obj-$(CONFIG_USB_CY7C63) += cy7c63.o
+obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o
obj-$(CONFIG_USB_CYTHERM) += cytherm.o
obj-$(CONFIG_USB_EMI26) += emi26.o
obj-$(CONFIG_USB_EMI62) += emi62.o
+++ /dev/null
-/*
-* cy7c63.c
-*
-* Copyright (c) 2006 Oliver Bock (bock@fh-wolfenbuettel.de)
-*
-* This driver is based on the Cypress Thermometer USB Driver by
-* Marcus Maul and the 2.0 version of Greg Kroah-Hartman's
-* USB Skeleton driver.
-*
-* Is is a generic driver for the Cypress CY7C63000 family.
-* For the time being it enables you to toggle the single I/O ports
-* of the device.
-*
-* Supported vendors: AK Modul-Bus Computer GmbH
-* Supported devices: CY7C63001A-PC (to be continued...)
-* Supported functions: Read/Write Ports (to be continued...)
-*
-* Chipsets families: CY7C63000, CY7C63001, CY7C63100, CY7C63101
-*
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation, version 2.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/usb.h>
-
-#define DRIVER_AUTHOR "Oliver Bock (bock@fh-wolfenbuettel.de)"
-#define DRIVER_DESC "Cypress CY7C63xxx USB driver"
-
-#define CY7C63_VENDOR_ID 0xa2c
-#define CY7C63_PRODUCT_ID 0x8
-
-#define CY7C63_READ_PORT 0x4
-#define CY7C63_WRITE_PORT 0x5
-#define CY7C63_READ_RAM 0x2
-#define CY7C63_WRITE_RAM 0x3
-#define CY7C63_READ_ROM 0x1
-
-#define CY7C63_READ_PORT_ID0 0
-#define CY7C63_WRITE_PORT_ID0 0
-#define CY7C63_READ_PORT_ID1 0x2
-#define CY7C63_WRITE_PORT_ID1 1
-
-#define CY7C63_MAX_REQSIZE 8
-
-
-/* table of devices that work with this driver */
-static struct usb_device_id cy7c63_table [] = {
- { USB_DEVICE(CY7C63_VENDOR_ID, CY7C63_PRODUCT_ID) },
- { }
-};
-MODULE_DEVICE_TABLE(usb, cy7c63_table);
-
-/* structure to hold all of our device specific stuff */
-struct cy7c63 {
- struct usb_device * udev;
- char port0;
- char port1;
-};
-
-/* used to send usb control messages to device */
-int vendor_command(struct cy7c63 *dev, unsigned char request,
- unsigned char address, unsigned char data) {
-
- int retval = 0;
- unsigned int pipe;
- unsigned char *iobuf;
-
- /* allocate some memory for the i/o buffer*/
- iobuf = kzalloc(CY7C63_MAX_REQSIZE, GFP_KERNEL);
- if (!iobuf) {
- dev_err(&dev->udev->dev, "Out of memory!\n");
- retval = -ENOMEM;
- goto error;
- }
-
- dev_dbg(&dev->udev->dev, "Sending usb_control_msg (data: %d)\n", data);
-
- /* prepare usb control message and send it upstream */
- pipe = usb_rcvctrlpipe(dev->udev, 0);
- retval = usb_control_msg(dev->udev, pipe, request,
- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
- address, data, iobuf, CY7C63_MAX_REQSIZE,
- USB_CTRL_GET_TIMEOUT);
-
- /* store returned data (more READs to be added!) */
- switch (request) {
- case CY7C63_READ_PORT:
- if (address == CY7C63_READ_PORT_ID0) {
- dev->port0 = iobuf[1];
- dev_dbg(&dev->udev->dev,
- "READ_PORT0 returned: %d\n",dev->port0);
- }
- else if (address == CY7C63_READ_PORT_ID1) {
- dev->port1 = iobuf[1];
- dev_dbg(&dev->udev->dev,
- "READ_PORT1 returned: %d\n",dev->port1);
- }
- break;
- }
-
- kfree(iobuf);
-error:
- return retval;
-}
-
-#define get_set_port(num,read_id,write_id) \
-static ssize_t set_port##num(struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) { \
- \
- int value; \
- int result = 0; \
- \
- struct usb_interface *intf = to_usb_interface(dev); \
- struct cy7c63 *cyp = usb_get_intfdata(intf); \
- \
- dev_dbg(&cyp->udev->dev, "WRITE_PORT%d called\n", num); \
- \
- /* validate input data */ \
- if (sscanf(buf, "%d", &value) < 1) { \
- result = -EINVAL; \
- goto error; \
- } \
- if (value>255 || value<0) { \
- result = -EINVAL; \
- goto error; \
- } \
- \
- result = vendor_command(cyp, CY7C63_WRITE_PORT, write_id, \
- (unsigned char)value); \
- \
- dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n",result); \
-error: \
- return result < 0 ? result : count; \
-} \
- \
-static ssize_t get_port##num(struct device *dev, \
- struct device_attribute *attr, char *buf) { \
- \
- int result = 0; \
- \
- struct usb_interface *intf = to_usb_interface(dev); \
- struct cy7c63 *cyp = usb_get_intfdata(intf); \
- \
- dev_dbg(&cyp->udev->dev, "READ_PORT%d called\n", num); \
- \
- result = vendor_command(cyp, CY7C63_READ_PORT, read_id, 0); \
- \
- dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result); \
- \
- return sprintf(buf, "%d", cyp->port##num); \
-} \
-static DEVICE_ATTR(port##num, S_IWUGO | S_IRUGO, get_port##num, set_port##num);
-
-get_set_port(0, CY7C63_READ_PORT_ID0, CY7C63_WRITE_PORT_ID0);
-get_set_port(1, CY7C63_READ_PORT_ID1, CY7C63_WRITE_PORT_ID1);
-
-static int cy7c63_probe(struct usb_interface *interface,
- const struct usb_device_id *id) {
-
- struct cy7c63 *dev = NULL;
- int retval = -ENOMEM;
-
- /* allocate memory for our device state and initialize it */
- dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (dev == NULL) {
- dev_err(&dev->udev->dev, "Out of memory!\n");
- goto error;
- }
-
- dev->udev = usb_get_dev(interface_to_usbdev(interface));
-
- /* save our data pointer in this interface device */
- usb_set_intfdata(interface, dev);
-
- /* create device attribute files */
- device_create_file(&interface->dev, &dev_attr_port0);
- device_create_file(&interface->dev, &dev_attr_port1);
-
- /* let the user know what node this device is now attached to */
- dev_info(&interface->dev,
- "Cypress CY7C63xxx device now attached\n");
-
- retval = 0;
-error:
- return retval;
-}
-
-static void cy7c63_disconnect(struct usb_interface *interface) {
-
- struct cy7c63 *dev;
-
- dev = usb_get_intfdata(interface);
- usb_set_intfdata(interface, NULL);
-
- /* remove device attribute files */
- device_remove_file(&interface->dev, &dev_attr_port0);
- device_remove_file(&interface->dev, &dev_attr_port1);
-
- usb_put_dev(dev->udev);
-
- dev_info(&interface->dev,
- "Cypress CY7C63xxx device now disconnected\n");
-
- kfree(dev);
-}
-
-static struct usb_driver cy7c63_driver = {
- .name = "cy7c63",
- .probe = cy7c63_probe,
- .disconnect = cy7c63_disconnect,
- .id_table = cy7c63_table,
-};
-
-static int __init cy7c63_init(void) {
-
- int result;
-
- /* register this driver with the USB subsystem */
- result = usb_register(&cy7c63_driver);
- if (result) {
- err("Function usb_register failed! Error number: %d\n", result);
- }
-
- return result;
-}
-
-static void __exit cy7c63_exit(void) {
-
- /* deregister this driver with the USB subsystem */
- usb_deregister(&cy7c63_driver);
-}
-
-module_init(cy7c63_init);
-module_exit(cy7c63_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-
-MODULE_LICENSE("GPL");
--- /dev/null
+/*
+* cypress_cy7c63.c
+*
+* Copyright (c) 2006 Oliver Bock (o.bock@fh-wolfenbuettel.de)
+*
+* This driver is based on the Cypress USB Driver by Marcus Maul
+* (cyport) and the 2.0 version of Greg Kroah-Hartman's
+* USB Skeleton driver.
+*
+* This is a generic driver for the Cypress CY7C63xxx family.
+* For the time being it enables you to read from and write to
+* the single I/O ports of the device.
+*
+* Supported vendors: AK Modul-Bus Computer GmbH
+* Supported devices: CY7C63001A-PC (to be continued...)
+* Supported functions: Read/Write Ports (to be continued...)
+*
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation, version 2.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/usb.h>
+
+#define DRIVER_AUTHOR "Oliver Bock (o.bock@fh-wolfenbuettel.de)"
+#define DRIVER_DESC "Cypress CY7C63xxx USB driver"
+
+#define CYPRESS_VENDOR_ID 0xa2c
+#define CYPRESS_PRODUCT_ID 0x8
+
+#define CYPRESS_READ_PORT 0x4
+#define CYPRESS_WRITE_PORT 0x5
+
+#define CYPRESS_READ_RAM 0x2
+#define CYPRESS_WRITE_RAM 0x3
+#define CYPRESS_READ_ROM 0x1
+
+#define CYPRESS_READ_PORT_ID0 0
+#define CYPRESS_WRITE_PORT_ID0 0
+#define CYPRESS_READ_PORT_ID1 0x2
+#define CYPRESS_WRITE_PORT_ID1 1
+
+#define CYPRESS_MAX_REQSIZE 8
+
+
+/* table of devices that work with this driver */
+static struct usb_device_id cypress_table [] = {
+ { USB_DEVICE(CYPRESS_VENDOR_ID, CYPRESS_PRODUCT_ID) },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, cypress_table);
+
+/* structure to hold all of our device specific stuff */
+struct cypress {
+ struct usb_device * udev;
+ unsigned char port[2];
+};
+
+/* used to send usb control messages to device */
+static int vendor_command(struct cypress *dev, unsigned char request,
+ unsigned char address, unsigned char data)
+{
+ int retval = 0;
+ unsigned int pipe;
+ unsigned char *iobuf;
+
+ /* allocate some memory for the i/o buffer*/
+ iobuf = kzalloc(CYPRESS_MAX_REQSIZE, GFP_KERNEL);
+ if (!iobuf) {
+ dev_err(&dev->udev->dev, "Out of memory!\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+
+ dev_dbg(&dev->udev->dev, "Sending usb_control_msg (data: %d)\n", data);
+
+ /* prepare usb control message and send it upstream */
+ pipe = usb_rcvctrlpipe(dev->udev, 0);
+ retval = usb_control_msg(dev->udev, pipe, request,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
+ address, data, iobuf, CYPRESS_MAX_REQSIZE,
+ USB_CTRL_GET_TIMEOUT);
+
+ /* store returned data (more READs to be added) */
+ switch (request) {
+ case CYPRESS_READ_PORT:
+ if (address == CYPRESS_READ_PORT_ID0) {
+ dev->port[0] = iobuf[1];
+ dev_dbg(&dev->udev->dev,
+ "READ_PORT0 returned: %d\n",
+ dev->port[0]);
+ }
+ else if (address == CYPRESS_READ_PORT_ID1) {
+ dev->port[1] = iobuf[1];
+ dev_dbg(&dev->udev->dev,
+ "READ_PORT1 returned: %d\n",
+ dev->port[1]);
+ }
+ break;
+ }
+
+ kfree(iobuf);
+error:
+ return retval;
+}
+
+/* write port value */
+static ssize_t write_port(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count,
+ int port_num, int write_id)
+{
+ int value = -1;
+ int result = 0;
+
+ struct usb_interface *intf = to_usb_interface(dev);
+ struct cypress *cyp = usb_get_intfdata(intf);
+
+ dev_dbg(&cyp->udev->dev, "WRITE_PORT%d called\n", port_num);
+
+ /* validate input data */
+ if (sscanf(buf, "%d", &value) < 1) {
+ result = -EINVAL;
+ goto error;
+ }
+ if (value < 0 || value > 255) {
+ result = -EINVAL;
+ goto error;
+ }
+
+ result = vendor_command(cyp, CYPRESS_WRITE_PORT, write_id,
+ (unsigned char)value);
+
+ dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result);
+error:
+ return result < 0 ? result : count;
+}
+
+/* attribute callback handler (write) */
+static ssize_t set_port0_handler(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return write_port(dev, attr, buf, count, 0, CYPRESS_WRITE_PORT_ID0);
+}
+
+/* attribute callback handler (write) */
+static ssize_t set_port1_handler(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return write_port(dev, attr, buf, count, 1, CYPRESS_WRITE_PORT_ID1);
+}
+
+/* read port value */
+static ssize_t read_port(struct device *dev, struct device_attribute *attr,
+ char *buf, int port_num, int read_id)
+{
+ int result = 0;
+
+ struct usb_interface *intf = to_usb_interface(dev);
+ struct cypress *cyp = usb_get_intfdata(intf);
+
+ dev_dbg(&cyp->udev->dev, "READ_PORT%d called\n", port_num);
+
+ result = vendor_command(cyp, CYPRESS_READ_PORT, read_id, 0);
+
+ dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result);
+
+ return sprintf(buf, "%d", cyp->port[port_num]);
+}
+
+/* attribute callback handler (read) */
+static ssize_t get_port0_handler(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return read_port(dev, attr, buf, 0, CYPRESS_READ_PORT_ID0);
+}
+
+/* attribute callback handler (read) */
+static ssize_t get_port1_handler(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1);
+}
+
+static DEVICE_ATTR(port0, S_IWUGO | S_IRUGO,
+ get_port0_handler, set_port0_handler);
+
+static DEVICE_ATTR(port1, S_IWUGO | S_IRUGO,
+ get_port1_handler, set_port1_handler);
+
+
+static int cypress_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct cypress *dev = NULL;
+ int retval = -ENOMEM;
+
+ /* allocate memory for our device state and initialize it */
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (dev == NULL) {
+ dev_err(&dev->udev->dev, "Out of memory!\n");
+ goto error;
+ }
+
+ dev->udev = usb_get_dev(interface_to_usbdev(interface));
+
+ /* save our data pointer in this interface device */
+ usb_set_intfdata(interface, dev);
+
+ /* create device attribute files */
+ device_create_file(&interface->dev, &dev_attr_port0);
+ device_create_file(&interface->dev, &dev_attr_port1);
+
+ /* let the user know that the device is now attached */
+ dev_info(&interface->dev,
+ "Cypress CY7C63xxx device now attached\n");
+
+ retval = 0;
+error:
+ return retval;
+}
+
+static void cypress_disconnect(struct usb_interface *interface)
+{
+ struct cypress *dev;
+
+ dev = usb_get_intfdata(interface);
+ usb_set_intfdata(interface, NULL);
+
+ /* remove device attribute files */
+ device_remove_file(&interface->dev, &dev_attr_port0);
+ device_remove_file(&interface->dev, &dev_attr_port1);
+
+ usb_put_dev(dev->udev);
+
+ dev_info(&interface->dev,
+ "Cypress CY7C63xxx device now disconnected\n");
+
+ kfree(dev);
+}
+
+static struct usb_driver cypress_driver = {
+ .name = "cypress_cy7c63",
+ .probe = cypress_probe,
+ .disconnect = cypress_disconnect,
+ .id_table = cypress_table,
+};
+
+static int __init cypress_init(void)
+{
+ int result;
+
+ /* register this driver with the USB subsystem */
+ result = usb_register(&cypress_driver);
+ if (result) {
+ err("Function usb_register failed! Error number: %d\n", result);
+ }
+
+ return result;
+}
+
+static void __exit cypress_exit(void)
+{
+ /* deregister this driver with the USB subsystem */
+ usb_deregister(&cypress_driver);
+}
+
+module_init(cypress_init);
+module_exit(cypress_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+
+MODULE_LICENSE("GPL");
/* create a urb, and a buffer for it, and copy the data to the urb */
urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!urb) {
- retval = -ENOMEM;
- goto error;
- }
+ if (!urb)
+ return -ENOMEM;
buf = usb_buffer_alloc(dev->udev, count, GFP_KERNEL, &urb->transfer_dma);
if (!buf) {
};
static void mon_text_ctor(void *, kmem_cache_t *, unsigned long);
-static void mon_text_dtor(void *, kmem_cache_t *, unsigned long);
/*
* mon_text_submit
(long)rp);
rp->e_slab = kmem_cache_create(rp->slab_name,
sizeof(struct mon_event_text), sizeof(long), 0,
- mon_text_ctor, mon_text_dtor);
+ mon_text_ctor, NULL);
if (rp->e_slab == NULL) {
rc = -ENOMEM;
goto err_slab;
memset(mem, 0xe5, sizeof(struct mon_event_text));
}
-static void mon_text_dtor(void *mem, kmem_cache_t *slab, unsigned long sflags)
-{
- ;
-}
#define VENDOR_ID_MELCO 0x0411
#define VENDOR_ID_MICRONET 0x3980
#define VENDOR_ID_LONGSHINE 0x07b8
+#define VENDOR_ID_ZYXEL 0x0586
#define PRODUCT_ID_RTL8150 0x8150
#define PRODUCT_ID_LUAKTX 0x0012
#define PRODUCT_ID_LCS8138TX 0x401a
#define PRODUCT_ID_SP128AR 0x0003
+#define PRODUCT_ID_PRESTIGE 0x401a
#undef EEPROM_WRITE
{USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)},
{USB_DEVICE(VENDOR_ID_MICRONET, PRODUCT_ID_SP128AR)},
{USB_DEVICE(VENDOR_ID_LONGSHINE, PRODUCT_ID_LCS8138TX)},
+ {USB_DEVICE(VENDOR_ID_ZYXEL, PRODUCT_ID_PRESTIGE)},
{}
};
bool "USB Secure Encapsulated Driver - Padded"
depends on USB_SERIAL_SAFE
+config USB_SERIAL_SIERRAWIRELESS
+ tristate "USB Sierra Wireless Driver"
+ depends on USB_SERIAL
+ help
+ Say M here if you want to use a Sierra Wireless device (if
+ using an PC 5220 or AC580 please use the Airprime driver
+ instead).
+
+ To compile this driver as a module, choose M here: the
+ module will be called sierra.
+
config USB_SERIAL_TI
tristate "USB TI 3410/5052 Serial Driver"
depends on USB_SERIAL
obj-$(CONFIG_USB_SERIAL_OPTION) += option.o
obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o
obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o
+obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o
obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o
obj-$(CONFIG_USB_SERIAL_VISOR) += visor.o
obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x16d5, 0x6501) }, /* AirData CDMA device */
port->bulk_in_endpointAddress),
port->read_urb->transfer_buffer,
port->read_urb->transfer_buffer_length,
- usb_serial_generic_write_bulk_callback, port);
+ usb_serial_generic_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result)
dev_err(&port->dev,
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
static int debug;
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
#include "belkin_sa.h"
static int debug;
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
static int usb_serial_device_match (struct device *dev, struct device_driver *drv)
{
#include <linux/tty.h>
#include <linux/console.h>
#include <linux/usb.h>
+#include <linux/usb/serial.h>
static int debug;
-#include "usb-serial.h"
-
struct usbcons_info {
int magic;
int break_flag;
#include <linux/moduleparam.h>
#include <linux/usb.h>
#include <asm/uaccess.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
/*
* Version Information
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
#define CYBERJACK_LOCAL_BUF_SIZE 32
#include <linux/moduleparam.h>
#include <linux/spinlock.h>
#include <linux/usb.h>
+#include <linux/usb/serial.h>
#include <linux/serial.h>
#include <linux/delay.h>
#include <asm/uaccess.h>
-#include "usb-serial.h"
#include "cypress_m8.h"
#include <asm/uaccess.h>
#include <linux/usb.h>
#include <linux/wait.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
/* Defines */
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
static int debug;
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
/* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */
#define CPUCS_REG 0x7F92
#include <asm/uaccess.h>
#include <linux/usb.h>
#include <linux/serial.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
#include "ftdi_sio.h"
/*
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
+ { USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
spinlock_t rx_lock; /* spinlock for receive state */
struct work_struct rx_work;
int rx_processed;
+ unsigned long rx_bytes;
__u16 interface; /* FT2232C port interface (0 for FT232/245) */
int force_baud; /* if non-zero, force the baud rate to this value */
int force_rtscts; /* if non-zero, force RTS-CTS to always be enabled */
+
+ spinlock_t tx_lock; /* spinlock for transmit state */
+ unsigned long tx_bytes;
+ unsigned long tx_outstanding_bytes;
+ unsigned long tx_outstanding_urbs;
};
/* Used for TIOCMIWAIT */
#define HIGH 1
#define LOW 0
+/* number of outstanding urbs to prevent userspace DoS from happening */
+#define URB_UPPER_LIMIT 42
+
/*
* ***************************************************************************
* Utlity functions
}
spin_lock_init(&priv->rx_lock);
+ spin_lock_init(&priv->tx_lock);
init_waitqueue_head(&priv->delta_msr_wait);
/* This will push the characters through immediately rather
than queue a task to deliver them */
dbg("%s", __FUNCTION__);
+ spin_lock_irqsave(&priv->tx_lock, flags);
+ priv->tx_bytes = 0;
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
+ spin_lock_irqsave(&priv->rx_lock, flags);
+ priv->rx_bytes = 0;
+ spin_unlock_irqrestore(&priv->rx_lock, flags);
+
if (port->tty)
port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
int data_offset ; /* will be 1 for the SIO and 0 otherwise */
int status;
int transfer_size;
+ unsigned long flags;
dbg("%s port %d, %d bytes", __FUNCTION__, port->number, count);
dbg("write request of 0 bytes");
return 0;
}
+ spin_lock_irqsave(&priv->tx_lock, flags);
+ if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) {
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
+ dbg("%s - write limit hit\n", __FUNCTION__);
+ return 0;
+ }
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
data_offset = priv->write_offset;
dbg("data_offset set to %d",data_offset);
err("%s - failed submitting write urb, error %d", __FUNCTION__, status);
count = status;
kfree (buffer);
+ } else {
+ spin_lock_irqsave(&priv->tx_lock, flags);
+ ++priv->tx_outstanding_urbs;
+ priv->tx_outstanding_bytes += count;
+ priv->tx_bytes += count;
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
}
/* we are done with this urb, so let the host driver
static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
{
+ unsigned long flags;
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
+ struct ftdi_private *priv;
+ int data_offset; /* will be 1 for the SIO and 0 otherwise */
+ unsigned long countback;
/* free up the transfer buffer, as usb_free_urb() does not do this */
kfree (urb->transfer_buffer);
return;
}
+ priv = usb_get_serial_port_data(port);
+ if (!priv) {
+ dbg("%s - bad port private data pointer - exiting", __FUNCTION__);
+ return;
+ }
+ /* account for transferred data */
+ countback = urb->actual_length;
+ data_offset = priv->write_offset;
+ if (data_offset > 0) {
+ /* Subtract the control bytes */
+ countback -= (data_offset * ((countback + (PKTSZ - 1)) / PKTSZ));
+ }
+ spin_lock_irqsave(&priv->tx_lock, flags);
+ --priv->tx_outstanding_urbs;
+ priv->tx_outstanding_bytes -= countback;
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
+
usb_serial_port_softint(port);
} /* ftdi_write_bulk_callback */
static int ftdi_write_room( struct usb_serial_port *port )
{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ int room;
+ unsigned long flags;
+
dbg("%s - port %d", __FUNCTION__, port->number);
- /*
- * We really can take anything the user throws at us
- * but let's pick a nice big number to tell the tty
- * layer that we have lots of free space
- */
- return 2048;
+ spin_lock_irqsave(&priv->tx_lock, flags);
+ if (priv->tx_outstanding_urbs < URB_UPPER_LIMIT) {
+ /*
+ * We really can take anything the user throws at us
+ * but let's pick a nice big number to tell the tty
+ * layer that we have lots of free space
+ */
+ room = 2048;
+ } else {
+ room = 0;
+ }
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
+ return room;
} /* ftdi_write_room */
static int ftdi_chars_in_buffer (struct usb_serial_port *port)
{ /* ftdi_chars_in_buffer */
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ int buffered;
+ unsigned long flags;
+
dbg("%s - port %d", __FUNCTION__, port->number);
- /*
- * We can't really account for how much data we
- * have sent out, but hasn't made it through to the
- * device, so just tell the tty layer that everything
- * is flushed.
- */
- return 0;
+ spin_lock_irqsave(&priv->tx_lock, flags);
+ buffered = (int)priv->tx_outstanding_bytes;
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
+ if (buffered < 0) {
+ err("%s outstanding tx bytes is negative!", __FUNCTION__);
+ buffered = 0;
+ }
+ return buffered;
} /* ftdi_chars_in_buffer */
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
struct tty_struct *tty;
struct ftdi_private *priv;
+ unsigned long countread;
+ unsigned long flags;
if (urb->number_of_packets > 0) {
err("%s transfer_buffer_length %d actual_length %d number of packets %d",__FUNCTION__,
return;
}
+ /* count data bytes, but not status bytes */
+ countread = urb->actual_length;
+ countread -= 2 * ((countread + (PKTSZ - 1)) / PKTSZ);
+ spin_lock_irqsave(&priv->rx_lock, flags);
+ priv->rx_bytes += countread;
+ spin_unlock_irqrestore(&priv->rx_lock, flags);
+
ftdi_process_read(port);
} /* ftdi_read_bulk_callback */
#define FTDI_ACTZWAVE_PID 0xF2D0
+/* www.starting-point-systems.com µChameleon device */
+#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */
+
/* www.irtrans.de device */
#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
*/
#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */
+/*
+ * ThorLabs USB motor drivers
+ */
+#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */
+
+/*
+ * Testo products (http://www.testo.com/)
+ * Submitted by Colin Leroy
+ */
+#define TESTO_VID 0x128D
+#define TESTO_USB_INTERFACE_PID 0x0001
+
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x1404, 0xcddc) },
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
+#include <linux/usb/serial.h>
/* the mode to be set when the port ist opened */
static int initial_mode = 1;
/* debug flag */
static int debug = 0;
-#include "usb-serial.h"
-
#define GARMIN_VENDOR_ID 0x091E
/*
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/usb.h>
+#include <linux/usb/serial.h>
#include <asm/uaccess.h>
-#include "usb-serial.h"
static int debug;
if (result)
dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
}
+EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback);
void usb_serial_generic_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
{
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
/*
* Version Information
#include <linux/wait.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
#include "io_edgeport.h"
#include "io_ionsp.h" /* info for the iosp messages */
#include "io_16654.h" /* 16654 UART defines */
#include <asm/uaccess.h>
#include <asm/semaphore.h>
#include <linux/usb.h>
+#include <linux/usb/serial.h>
-#include "usb-serial.h"
#include "io_16654.h"
#include "io_usbvend.h"
#include "io_ti.h"
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
#include "ipaq.h"
#define KP_RETRIES 100
static __u16 product, vendor;
static int debug;
+static int connect_retries = KP_RETRIES;
+static int initial_wait;
/* Function prototypes for an ipaq */
static int ipaq_open (struct usb_serial_port *port, struct file *filp);
struct ipaq_private *priv;
struct ipaq_packet *pkt;
int i, result = 0;
- int retries = KP_RETRIES;
+ int retries = connect_retries;
dbg("%s - port %d", __FUNCTION__, port->number);
port->read_urb->transfer_buffer_length = URBDATA_SIZE;
port->bulk_out_size = port->write_urb->transfer_buffer_length = URBDATA_SIZE;
+ msleep(1000*initial_wait);
/* Start reading from the device */
usb_fill_bulk_urb(port->read_urb, serial->dev,
usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
ipaq_read_bulk_callback, port);
- result = usb_submit_urb(port->read_urb, GFP_KERNEL);
- if (result) {
- err("%s - failed submitting read urb, error %d", __FUNCTION__, result);
- goto error;
- }
/*
* Send out control message observed in win98 sniffs. Not sure what
usb_sndctrlpipe(serial->dev, 0), 0x22, 0x21,
0x1, 0, NULL, 0, 100);
if (result == 0) {
+ result = usb_submit_urb(port->read_urb, GFP_KERNEL);
+ if (result) {
+ err("%s - failed submitting read urb, error %d", __FUNCTION__, result);
+ goto error;
+ }
return 0;
}
+ msleep(1000);
}
err("%s - failed doing control urb, error %d", __FUNCTION__, result);
goto error;
if (urb->status) {
dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
+ return;
}
spin_lock_irqsave(&write_list_lock, flags);
module_param(product, ushort, 0);
MODULE_PARM_DESC(product, "User specified USB idProduct");
+
+module_param(connect_retries, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(connect_retries, "Maximum number of connect retries (one second each)");
+
+module_param(initial_wait, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(initial_wait, "Time to wait before attempting a connection (in seconds)");
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/usb.h>
+#include <linux/usb/serial.h>
#include <asm/uaccess.h>
-#include "usb-serial.h"
/*
* Version Information
dbg("%s", __FUNCTION__);
+ port->write_urb_busy = 0;
+
if (urb->status)
dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
/*
* Version Information
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
#include "keyspan.h"
static int debug;
#include <linux/workqueue.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
+#include <linux/usb/serial.h>
static int debug;
#include "xircom_pgs_fw.h"
#endif
-#include "usb-serial.h"
-
/*
* Version Information
*/
#include <linux/module.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
#include "kl5kusb105.h"
static int debug;
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
+#include <linux/usb/serial.h>
#include <linux/ioctl.h>
-#include "usb-serial.h"
#include "kobil_sct.h"
static int debug;
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
#include "mct_u232.h"
/*
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
static int debug;
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
static int debug;
2006-06-01 v0.6.2 add backwards-compatibility stuff
2006-06-01 v0.6.3 add Novatel Wireless
2006-06-01 v0.7 Option => GSM
+ 2006-06-01 v0.7.1 add COBRA2
Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
device features.
*/
-#define DRIVER_VERSION "v0.7.0"
+#define DRIVER_VERSION "v0.7.1"
#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
#define DRIVER_DESC "USB Driver for GSM modems"
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
/* Function prototypes */
static int option_open(struct usb_serial_port *port, struct file *filp);
#define OPTION_PRODUCT_FUSION 0x6000
#define OPTION_PRODUCT_FUSION2 0x6300
#define OPTION_PRODUCT_COBRA 0x6500
+#define OPTION_PRODUCT_COBRA2 0x6600
#define HUAWEI_PRODUCT_E600 0x1001
#define AUDIOVOX_PRODUCT_AIRCARD 0x0112
#define SIERRAWIRELESS_PRODUCT_MC8755 0x6802
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
+ { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
{ USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
+ { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
#include "pl2303.h"
/*
static struct usb_device_id id_table [] = {
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
{ USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
{ USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
{ USB_DEVICE(OTI_VENDOR_ID, OTI_PRODUCT_ID) },
+ { USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
{ } /* Terminating entry */
};
#define PL2303_VENDOR_ID 0x067b
#define PL2303_PRODUCT_ID 0x2303
#define PL2303_PRODUCT_ID_RSAQ2 0x04bb
+#define PL2303_PRODUCT_ID_DCU11 0x1234
#define PL2303_PRODUCT_ID_PHAROS 0xaaa0
#define PL2303_PRODUCT_ID_RSAQ3 0xaaa2
/* Ours Technology Inc DKU-5 clone, chipset: Prolific Technology Inc */
#define OTI_VENDOR_ID 0x0ea0
#define OTI_PRODUCT_ID 0x6858
+
+/* DATAPILOT Universal-2 Phone Cable */
+#define DATAPILOT_U2_VENDOR_ID 0x0731
+#define DATAPILOT_U2_PRODUCT_ID 0x2003
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
#ifndef CONFIG_USB_SAFE_PADDED
--- /dev/null
+/*
+ * Sierra Wireless CDMA Wireless Serial USB driver
+ *
+ * Current Copy modified by: Kevin Lloyd <linux@sierrawireless.com>
+ * Original Copyright (C) 2005-2006 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+static struct usb_device_id id_table [] = {
+ { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */
+ { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
+ { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
+ { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
+ { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
+ { USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
+ { USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 */
+ { USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */
+ /* Following devices are supported in the airprime.c driver */
+ /* { USB_DEVICE(0x1199, 0x0112) }, */ /* Sierra Wireless AirCard 580 */
+ /* { USB_DEVICE(0x0F3D, 0x0112) }, */ /* AirPrime/Sierra PC 5220 */
+ { }
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver sierra_driver = {
+ .name = "sierra_wireless",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+};
+
+static struct usb_serial_driver sierra_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "Sierra_Wireless",
+ },
+ .id_table = id_table,
+ .num_interrupt_in = NUM_DONT_CARE,
+ .num_bulk_in = NUM_DONT_CARE,
+ .num_bulk_out = NUM_DONT_CARE,
+ .num_ports = 3,
+};
+
+static int __init sierra_init(void)
+{
+ int retval;
+
+ retval = usb_serial_register(&sierra_device);
+ if (retval)
+ return retval;
+ retval = usb_register(&sierra_driver);
+ if (retval)
+ usb_serial_deregister(&sierra_device);
+ return retval;
+}
+
+static void __exit sierra_exit(void)
+{
+ usb_deregister(&sierra_driver);
+ usb_serial_deregister(&sierra_device);
+}
+
+module_init(sierra_init);
+module_exit(sierra_exit);
+MODULE_LICENSE("GPL");
#include <asm/uaccess.h>
#include <asm/semaphore.h>
#include <linux/usb.h>
+#include <linux/usb/serial.h>
-#include "usb-serial.h"
#include "ti_usb_3410_5052.h"
#include "ti_fw_3410.h" /* firmware image for 3410 */
#include "ti_fw_5052.h" /* firmware image for 5052 */
#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
#include "pl2303.h"
/*
#define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/"
#define DRIVER_DESC "USB Serial Driver core"
+static void port_free(struct usb_serial_port *port);
+
/* Driver structure we register with the USB core */
static struct usb_driver usb_serial_driver = {
.name = "usbserial",
port = serial->port[i];
if (!port)
continue;
- usb_kill_urb(port->read_urb);
- usb_free_urb(port->read_urb);
- usb_kill_urb(port->write_urb);
- usb_free_urb(port->write_urb);
- usb_kill_urb(port->interrupt_in_urb);
- usb_free_urb(port->interrupt_in_urb);
- usb_kill_urb(port->interrupt_out_urb);
- usb_free_urb(port->interrupt_out_urb);
- kfree(port->bulk_in_buffer);
- kfree(port->bulk_out_buffer);
- kfree(port->interrupt_in_buffer);
- kfree(port->interrupt_out_buffer);
+ port_free(port);
}
}
- flush_scheduled_work(); /* port->work */
-
usb_put_dev(serial->dev);
/* free up any memory that we allocated */
struct usb_serial_port *port = to_usb_serial_port(dev);
dbg ("%s - %s", __FUNCTION__, dev->bus_id);
+ port_free(port);
+}
+
+static void port_free(struct usb_serial_port *port)
+{
usb_kill_urb(port->read_urb);
usb_free_urb(port->read_urb);
usb_kill_urb(port->write_urb);
kfree(port->bulk_out_buffer);
kfree(port->interrupt_in_buffer);
kfree(port->interrupt_out_buffer);
+ flush_scheduled_work(); /* port->work */
kfree(port);
}
+++ /dev/null
-/*
- * USB Serial Converter driver
- *
- * Copyright (C) 1999 - 2005
- * Greg Kroah-Hartman (greg@kroah.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- *
- */
-
-
-#ifndef __LINUX_USB_SERIAL_H
-#define __LINUX_USB_SERIAL_H
-
-#include <linux/kref.h>
-#include <linux/mutex.h>
-
-#define SERIAL_TTY_MAJOR 188 /* Nice legal number now */
-#define SERIAL_TTY_MINORS 255 /* loads of devices :) */
-
-#define MAX_NUM_PORTS 8 /* The maximum number of ports one device can grab at once */
-
-/* parity check flag */
-#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-
-/**
- * usb_serial_port: structure for the specific ports of a device.
- * @serial: pointer back to the struct usb_serial owner of this port.
- * @tty: pointer to the corresponding tty for this port.
- * @lock: spinlock to grab when updating portions of this structure.
- * @mutex: mutex used to synchronize serial_open() and serial_close()
- * access for this port.
- * @number: the number of the port (the minor number).
- * @interrupt_in_buffer: pointer to the interrupt in buffer for this port.
- * @interrupt_in_urb: pointer to the interrupt in struct urb for this port.
- * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe
- * for this port.
- * @interrupt_out_buffer: pointer to the interrupt out buffer for this port.
- * @interrupt_out_size: the size of the interrupt_out_buffer, in bytes.
- * @interrupt_out_urb: pointer to the interrupt out struct urb for this port.
- * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe
- * for this port.
- * @bulk_in_buffer: pointer to the bulk in buffer for this port.
- * @read_urb: pointer to the bulk in struct urb for this port.
- * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this
- * port.
- * @bulk_out_buffer: pointer to the bulk out buffer for this port.
- * @bulk_out_size: the size of the bulk_out_buffer, in bytes.
- * @write_urb: pointer to the bulk out struct urb for this port.
- * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this
- * port.
- * @write_wait: a wait_queue_head_t used by the port.
- * @work: work queue entry for the line discipline waking up.
- * @open_count: number of times this port has been opened.
- *
- * This structure is used by the usb-serial core and drivers for the specific
- * ports of a device.
- */
-struct usb_serial_port {
- struct usb_serial * serial;
- struct tty_struct * tty;
- spinlock_t lock;
- struct mutex mutex;
- unsigned char number;
-
- unsigned char * interrupt_in_buffer;
- struct urb * interrupt_in_urb;
- __u8 interrupt_in_endpointAddress;
-
- unsigned char * interrupt_out_buffer;
- int interrupt_out_size;
- struct urb * interrupt_out_urb;
- __u8 interrupt_out_endpointAddress;
-
- unsigned char * bulk_in_buffer;
- int bulk_in_size;
- struct urb * read_urb;
- __u8 bulk_in_endpointAddress;
-
- unsigned char * bulk_out_buffer;
- int bulk_out_size;
- struct urb * write_urb;
- int write_urb_busy;
- __u8 bulk_out_endpointAddress;
-
- wait_queue_head_t write_wait;
- struct work_struct work;
- int open_count;
- struct device dev;
-};
-#define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev)
-
-/* get and set the port private data pointer helper functions */
-static inline void *usb_get_serial_port_data (struct usb_serial_port *port)
-{
- return dev_get_drvdata(&port->dev);
-}
-
-static inline void usb_set_serial_port_data (struct usb_serial_port *port, void *data)
-{
- dev_set_drvdata(&port->dev, data);
-}
-
-/**
- * usb_serial - structure used by the usb-serial core for a device
- * @dev: pointer to the struct usb_device for this device
- * @type: pointer to the struct usb_serial_driver for this device
- * @interface: pointer to the struct usb_interface for this device
- * @minor: the starting minor number for this device
- * @num_ports: the number of ports this device has
- * @num_interrupt_in: number of interrupt in endpoints we have
- * @num_interrupt_out: number of interrupt out endpoints we have
- * @num_bulk_in: number of bulk in endpoints we have
- * @num_bulk_out: number of bulk out endpoints we have
- * @port: array of struct usb_serial_port structures for the different ports.
- * @private: place to put any driver specific information that is needed. The
- * usb-serial driver is required to manage this data, the usb-serial core
- * will not touch this. Use usb_get_serial_data() and
- * usb_set_serial_data() to access this.
- */
-struct usb_serial {
- struct usb_device * dev;
- struct usb_serial_driver * type;
- struct usb_interface * interface;
- unsigned char minor;
- unsigned char num_ports;
- unsigned char num_port_pointers;
- char num_interrupt_in;
- char num_interrupt_out;
- char num_bulk_in;
- char num_bulk_out;
- struct usb_serial_port * port[MAX_NUM_PORTS];
- struct kref kref;
- void * private;
-};
-#define to_usb_serial(d) container_of(d, struct usb_serial, kref)
-
-#define NUM_DONT_CARE (-1)
-
-/* get and set the serial private data pointer helper functions */
-static inline void *usb_get_serial_data (struct usb_serial *serial)
-{
- return serial->private;
-}
-
-static inline void usb_set_serial_data (struct usb_serial *serial, void *data)
-{
- serial->private = data;
-}
-
-/**
- * usb_serial_driver - describes a usb serial driver
- * @description: pointer to a string that describes this driver. This string used
- * in the syslog messages when a device is inserted or removed.
- * @id_table: pointer to a list of usb_device_id structures that define all
- * of the devices this structure can support.
- * @num_interrupt_in: the number of interrupt in endpoints this device will
- * have.
- * @num_interrupt_out: the number of interrupt out endpoints this device will
- * have.
- * @num_bulk_in: the number of bulk in endpoints this device will have.
- * @num_bulk_out: the number of bulk out endpoints this device will have.
- * @num_ports: the number of different ports this device will have.
- * @calc_num_ports: pointer to a function to determine how many ports this
- * device has dynamically. It will be called after the probe()
- * callback is called, but before attach()
- * @probe: pointer to the driver's probe function.
- * This will be called when the device is inserted into the system,
- * but before the device has been fully initialized by the usb_serial
- * subsystem. Use this function to download any firmware to the device,
- * or any other early initialization that might be needed.
- * Return 0 to continue on with the initialization sequence. Anything
- * else will abort it.
- * @attach: pointer to the driver's attach function.
- * This will be called when the struct usb_serial structure is fully set
- * set up. Do any local initialization of the device, or any private
- * memory structure allocation at this point in time.
- * @shutdown: pointer to the driver's shutdown function. This will be
- * called when the device is removed from the system.
- *
- * This structure is defines a USB Serial driver. It provides all of
- * the information that the USB serial core code needs. If the function
- * pointers are defined, then the USB serial core code will call them when
- * the corresponding tty port functions are called. If they are not
- * called, the generic serial function will be used instead.
- *
- * The driver.owner field should be set to the module owner of this driver.
- * The driver.name field should be set to the name of this driver (remember
- * it will show up in sysfs, so it needs to be short and to the point.
- * Useing the module name is a good idea.)
- */
-struct usb_serial_driver {
- const char *description;
- const struct usb_device_id *id_table;
- char num_interrupt_in;
- char num_interrupt_out;
- char num_bulk_in;
- char num_bulk_out;
- char num_ports;
-
- struct list_head driver_list;
- struct device_driver driver;
-
- int (*probe) (struct usb_serial *serial, const struct usb_device_id *id);
- int (*attach) (struct usb_serial *serial);
- int (*calc_num_ports) (struct usb_serial *serial);
-
- void (*shutdown) (struct usb_serial *serial);
-
- int (*port_probe) (struct usb_serial_port *port);
- int (*port_remove) (struct usb_serial_port *port);
-
- /* serial function calls */
- int (*open) (struct usb_serial_port *port, struct file * filp);
- void (*close) (struct usb_serial_port *port, struct file * filp);
- int (*write) (struct usb_serial_port *port, const unsigned char *buf, int count);
- int (*write_room) (struct usb_serial_port *port);
- int (*ioctl) (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
- void (*set_termios) (struct usb_serial_port *port, struct termios * old);
- void (*break_ctl) (struct usb_serial_port *port, int break_state);
- int (*chars_in_buffer) (struct usb_serial_port *port);
- void (*throttle) (struct usb_serial_port *port);
- void (*unthrottle) (struct usb_serial_port *port);
- int (*tiocmget) (struct usb_serial_port *port, struct file *file);
- int (*tiocmset) (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
-
- void (*read_int_callback)(struct urb *urb, struct pt_regs *regs);
- void (*write_int_callback)(struct urb *urb, struct pt_regs *regs);
- void (*read_bulk_callback)(struct urb *urb, struct pt_regs *regs);
- void (*write_bulk_callback)(struct urb *urb, struct pt_regs *regs);
-};
-#define to_usb_serial_driver(d) container_of(d, struct usb_serial_driver, driver)
-
-extern int usb_serial_register(struct usb_serial_driver *driver);
-extern void usb_serial_deregister(struct usb_serial_driver *driver);
-extern void usb_serial_port_softint(struct usb_serial_port *port);
-
-extern int usb_serial_probe(struct usb_interface *iface, const struct usb_device_id *id);
-extern void usb_serial_disconnect(struct usb_interface *iface);
-
-extern int ezusb_writememory (struct usb_serial *serial, int address, unsigned char *data, int length, __u8 bRequest);
-extern int ezusb_set_reset (struct usb_serial *serial, unsigned char reset_bit);
-
-/* USB Serial console functions */
-#ifdef CONFIG_USB_SERIAL_CONSOLE
-extern void usb_serial_console_init (int debug, int minor);
-extern void usb_serial_console_exit (void);
-extern void usb_serial_console_disconnect(struct usb_serial *serial);
-#else
-static inline void usb_serial_console_init (int debug, int minor) { }
-static inline void usb_serial_console_exit (void) { }
-static inline void usb_serial_console_disconnect(struct usb_serial *serial) {}
-#endif
-
-/* Functions needed by other parts of the usbserial core */
-extern struct usb_serial *usb_serial_get_by_index (unsigned int minor);
-extern void usb_serial_put(struct usb_serial *serial);
-extern int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp);
-extern int usb_serial_generic_write (struct usb_serial_port *port, const unsigned char *buf, int count);
-extern void usb_serial_generic_close (struct usb_serial_port *port, struct file *filp);
-extern int usb_serial_generic_write_room (struct usb_serial_port *port);
-extern int usb_serial_generic_chars_in_buffer (struct usb_serial_port *port);
-extern void usb_serial_generic_read_bulk_callback (struct urb *urb, struct pt_regs *regs);
-extern void usb_serial_generic_write_bulk_callback (struct urb *urb, struct pt_regs *regs);
-extern void usb_serial_generic_shutdown (struct usb_serial *serial);
-extern int usb_serial_generic_register (int debug);
-extern void usb_serial_generic_deregister (void);
-
-extern int usb_serial_bus_register (struct usb_serial_driver *device);
-extern void usb_serial_bus_deregister (struct usb_serial_driver *device);
-
-extern struct usb_serial_driver usb_serial_generic_device;
-extern struct bus_type usb_serial_bus_type;
-extern struct tty_driver *usb_serial_tty_driver;
-
-static inline void usb_serial_debug_data(int debug,
- struct device *dev,
- const char *function, int size,
- const unsigned char *data)
-{
- int i;
-
- if (debug) {
- dev_printk(KERN_DEBUG, dev, "%s - length = %d, data = ", function, size);
- for (i = 0; i < size; ++i)
- printk ("%.2x ", data[i]);
- printk ("\n");
- }
-}
-
-/* Use our own dbg macro */
-#undef dbg
-#define dbg(format, arg...) do { if (debug) printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , ## arg); } while (0)
-
-
-
-#endif /* ifdef __LINUX_USB_SERIAL_H */
-
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
#include "visor.h"
/*
spin_lock_irqsave(&priv->lock, flags);
priv->bytes_in = 0;
priv->bytes_out = 0;
- priv->outstanding_urbs = 0;
priv->throttled = 0;
spin_unlock_irqrestore(&priv->lock, flags);
static int visor_write_room (struct usb_serial_port *port)
{
+ struct visor_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+
dbg("%s - port %d", __FUNCTION__, port->number);
/*
* We really can take anything the user throws at us
* but let's pick a nice big number to tell the tty
- * layer that we have lots of free space
+ * layer that we have lots of free space, unless we don't.
*/
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ dbg("%s - write limit hit\n", __FUNCTION__);
+ return 0;
+ }
+ spin_unlock_irqrestore(&priv->lock, flags);
+
return 2048;
}
static int generic_startup(struct usb_serial *serial)
{
+ struct usb_serial_port **ports = serial->port;
struct visor_private *priv;
int i;
for (i = 0; i < serial->num_ports; ++i) {
priv = kzalloc (sizeof(*priv), GFP_KERNEL);
- if (!priv)
+ if (!priv) {
+ while (i-- != 0) {
+ priv = usb_get_serial_port_data(ports[i]);
+ usb_set_serial_port_data(ports[i], NULL);
+ kfree(priv);
+ }
return -ENOMEM;
+ }
spin_lock_init(&priv->lock);
- usb_set_serial_port_data(serial->port[i], priv);
+ usb_set_serial_port_data(ports[i], priv);
}
return 0;
}
static void visor_shutdown (struct usb_serial *serial)
{
+ struct visor_private *priv;
+ int i;
+
dbg("%s", __FUNCTION__);
+
+ for (i = 0; i < serial->num_ports; i++) {
+ priv = usb_get_serial_port_data(serial->port[i]);
+ if (priv) {
+ usb_set_serial_port_data(serial->port[i], NULL);
+ kfree(priv);
+ }
+ }
}
static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
#include <linux/usb.h>
#include <linux/serial_reg.h>
#include <linux/serial.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
#include "whiteheat_fw.h" /* firmware for the ConnectTech WhiteHEAT device */
#include "whiteheat.h" /* WhiteHEAT specific commands */
if (sdev->scsi_level < SCSI_2)
sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2;
- /* According to the technical support people at Genesys Logic,
- * devices using their chips have problems transferring more than
- * 32 KB at a time. In practice people have found that 64 KB
- * works okay and that's what Windows does. But we'll be
- * conservative; people can always use the sysfs interface to
- * increase max_sectors. */
- if (le16_to_cpu(us->pusb_dev->descriptor.idVendor) == USB_VENDOR_ID_GENESYS &&
+ /* Many devices have trouble transfering more than 32KB at a time,
+ * while others have trouble with more than 64K. At this time we
+ * are limiting both to 32K (64 sectores).
+ */
+ if ((us->flags & US_FL_MAX_SECTORS_64) &&
sdev->request_queue->max_sectors > 64)
blk_queue_max_sectors(sdev->request_queue, 64);
if (timeleft <= 0) {
US_DEBUGP("%s -- cancelling URB\n",
timeleft == 0 ? "Timeout" : "Signal");
- usb_unlink_urb(us->current_urb);
+ usb_kill_urb(us->current_urb);
}
/* return the URB status */
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
+/* Submitted by Ernestas Vaiciukevicius <ernisv@gmail.com> */
+UNUSUAL_DEV( 0x0419, 0x0100, 0x0100, 0x0100,
+ "Samsung Info. Systems America, Inc.",
+ "MP3 Player",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Orgad Shaneh <orgads@gmail.com> */
+UNUSUAL_DEV( 0x0419, 0xaace, 0x0100, 0x0100,
+ "Samsung", "MP3 Player",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
/* Reported by Christian Leber <christian@leber.de> */
UNUSUAL_DEV( 0x0419, 0xaaf5, 0x0100, 0x0100,
"TrekStor",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
+ * Einar Th. Einarsson <einarthered@gmail.com> */
+UNUSUAL_DEV( 0x0421, 0x0444, 0x0100, 0x0100,
+ "Nokia",
+ "N91",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
/* Reported by Jiri Slaby <jirislaby@gmail.com> and
* Rene C. Castberg <Rene@Castberg.org> */
UNUSUAL_DEV( 0x0421, 0x0446, 0x0100, 0x0100,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+/* Reported by Matthew Bloch <matthew@bytemark.co.uk> */
+UNUSUAL_DEV( 0x0421, 0x044e, 0x0100, 0x0100,
+ "Nokia",
+ "E61",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
/* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210,
"SMSC",
US_SC_SCSI, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
-/* This entry is needed because the device reports Sub=ff */
-UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0600,
+/* Submitted by Lars Jacob <jacob.lars@googlemail.com>
+ * This entry is needed because the device reports Sub=ff */
+UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0610,
"Sony",
- "DSC-T1/T5",
+ "DSC-T1/T5/H5",
US_SC_8070, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
* They were originally reported by Alexander Oltu
* <alexander@all-2.com> and Peter Marks <peter.marks@turner.com>
* respectively.
+ *
+ * US_FL_GO_SLOW and US_FL_MAX_SECTORS_64 added by Phil Dibowitz
+ * <phil@ipom.com> as these flags were made and hard-coded
+ * special-cases were pulled from scsiglue.c.
*/
UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff,
"Genesys Logic",
"USB to IDE Optical",
US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_GO_SLOW ),
+ US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff,
"Genesys Logic",
"USB to IDE Disk",
US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_GO_SLOW ),
+ US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
/* Reported by Hanno Boeck <hanno@gmx.de>
* Taken from the Lycoris Kernel */
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* Reported by Benjamin Schiller <sbenni@gmx.de>
+ * It is also sold by Easylite as DJ 20 */
+UNUSUAL_DEV( 0x0ed1, 0x7636, 0x0103, 0x0103,
+ "Typhoon",
+ "My DJ 1820",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
+
/* Reported by Michael Stattmann <michael@stattmann.com> */
UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000,
"Sony Ericsson",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
+ * and Renato Perini <rperini@email.it>
+ */
+UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001,
+ "Motorola",
+ "RAZR V3x",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
+
/* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */
UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999,
"MPIO",
#include <linux/slab.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
+#include <linux/utsrelease.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
/* lock access to the state */
scsi_lock(host);
+ /* did the command already complete because of a disconnect? */
+ if (!us->srb)
+ ; /* nothing to do */
+
/* indicate that the command is done */
- if (us->srb->result != DID_ABORT << 16) {
+ else if (us->srb->result != DID_ABORT << 16) {
US_DEBUGP("scsi cmd done, result=0x%x\n",
us->srb->result);
us->srb->scsi_done(us->srb);
if (msg >= 0 && !(us->flags & US_FL_NEED_OVERRIDE))
printk(KERN_NOTICE USB_STORAGE "This device "
"(%04x,%04x,%04x S %02x P %02x)"
- " has %s in unusual_devs.h\n"
+ " has %s in unusual_devs.h (kernel"
+ " %s)\n"
" Please send a copy of this message to "
"<linux-usb-devel@lists.sourceforge.net>\n",
le16_to_cpu(ddesc->idVendor),
le16_to_cpu(ddesc->bcdDevice),
idesc->bInterfaceSubClass,
idesc->bInterfaceProtocol,
- msgs[msg]);
+ msgs[msg],
+ UTS_RELEASE);
}
}
* the host */
static void quiesce_and_remove_host(struct us_data *us)
{
+ struct Scsi_Host *host = us_to_host(us);
+
/* Prevent new USB transfers, stop the current command, and
* interrupt a SCSI-scan or device-reset delay */
+ scsi_lock(host);
set_bit(US_FLIDX_DISCONNECTING, &us->flags);
+ scsi_unlock(host);
usb_stor_stop_transport(us);
wake_up(&us->delay_wait);
/* It doesn't matter if the SCSI-scanning thread is still running.
* The thread will exit when it sees the DISCONNECTING flag. */
- /* Wait for the current command to finish, then remove the host */
- mutex_lock(&us->dev_mutex);
- mutex_unlock(&us->dev_mutex);
-
/* queuecommand won't accept any new commands and the control
* thread won't execute a previously-queued command. If there
* is such a command pending, complete it with an error. */
+ mutex_lock(&us->dev_mutex);
if (us->srb) {
us->srb->result = DID_NO_CONNECT << 16;
- scsi_lock(us_to_host(us));
+ scsi_lock(host);
us->srb->scsi_done(us->srb);
us->srb = NULL;
- scsi_unlock(us_to_host(us));
+ scsi_unlock(host);
}
+ mutex_unlock(&us->dev_mutex);
/* Now we own no commands so it's safe to remove the SCSI host */
- scsi_remove_host(us_to_host(us));
+ scsi_remove_host(host);
}
/* Second stage of disconnect processing: deallocate all resources */
#define scsi_unlock(host) spin_unlock_irq(host->host_lock)
#define scsi_lock(host) spin_lock_irq(host->host_lock)
-
-/* Vendor ID list for devices that require special handling */
-#define USB_VENDOR_ID_GENESYS 0x05e3 /* Genesys Logic */
-
#endif
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
<file:Documentation/fb/pxafb.txt> describes the available parameters.
+config FB_MBX
+ tristate "2700G LCD framebuffer support"
+ depends on FB && ARCH_PXA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Framebuffer driver for the Intel 2700G (Marathon) Graphics
+ Accelerator
+
+config FB_MBX_DEBUG
+ bool "Enable debugging info via debugfs"
+ depends on FB_MBX && DEBUG_FS
+ default n
+ ---help---
+ Enable this if you want debugging information using the debug
+ filesystem (debugfs)
+
+ If unsure, say N.
+
config FB_W100
tristate "W100 frame buffer support"
depends on FB && PXA_SHARPSL
obj-$(CONFIG_FB_KYRO) += kyro/
obj-$(CONFIG_FB_SAVAGE) += savage/
obj-$(CONFIG_FB_GEODE) += geode/
+obj-$(CONFIG_FB_MBX) += mbx/
obj-$(CONFIG_FB_I810) += vgastate.o
obj-$(CONFIG_FB_NEOMAGIC) += neofb.o vgastate.o
obj-$(CONFIG_FB_VIRGE) += virgefb.o
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
static void wait_for_fifo(u16 entries, struct aty128fb_par *par);
static void wait_for_idle(struct aty128fb_par *par);
static u32 depth_to_dst(u32 depth);
+static void aty128_bl_set_power(struct fb_info *info, int power);
#define BIOS_IN8(v) (readb(bios + (v)))
#define BIOS_IN16(v) (readb(bios + (v)) | \
reg &= ~LVDS_DISPLAY_DIS;
aty_st_le32(LVDS_GEN_CNTL, reg);
#ifdef CONFIG_FB_ATY128_BACKLIGHT
- mutex_lock(&info->bl_mutex);
- if (info->bl_dev) {
- down(&info->bl_dev->sem);
- info->bl_dev->props->update_status(info->bl_dev);
- up(&info->bl_dev->sem);
- }
- mutex_unlock(&info->bl_mutex);
+ aty128_bl_set_power(info, FB_BLANK_UNBLANK);
#endif
} else {
#ifdef CONFIG_FB_ATY128_BACKLIGHT
- mutex_lock(&info->bl_mutex);
- if (info->bl_dev) {
- down(&info->bl_dev->sem);
- info->bl_dev->props->brightness = 0;
- info->bl_dev->props->power = FB_BLANK_POWERDOWN;
- info->bl_dev->props->update_status(info->bl_dev);
- up(&info->bl_dev->sem);
- }
- mutex_unlock(&info->bl_mutex);
+ aty128_bl_set_power(info, FB_BLANK_POWERDOWN);
#endif
reg = aty_ld_le32(LVDS_GEN_CNTL);
reg |= LVDS_DISPLAY_DIS;
static struct backlight_properties aty128_bl_data;
+/* Call with fb_info->bl_mutex held */
static int aty128_bl_get_level_brightness(struct aty128fb_par *par,
int level)
{
int atylevel;
/* Get and convert the value */
- mutex_lock(&info->bl_mutex);
atylevel = MAX_LEVEL -
(info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL);
- mutex_unlock(&info->bl_mutex);
if (atylevel < 0)
atylevel = 0;
/* That one prevents proper CRT output with LCD off */
#undef BACKLIGHT_DAC_OFF
-static int aty128_bl_update_status(struct backlight_device *bd)
+/* Call with fb_info->bl_mutex held */
+static int __aty128_bl_update_status(struct backlight_device *bd)
{
struct aty128fb_par *par = class_get_devdata(&bd->class_dev);
unsigned int reg = aty_ld_le32(LVDS_GEN_CNTL);
return 0;
}
+static int aty128_bl_update_status(struct backlight_device *bd)
+{
+ struct aty128fb_par *par = class_get_devdata(&bd->class_dev);
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+ int ret;
+
+ mutex_lock(&info->bl_mutex);
+ ret = __aty128_bl_update_status(bd);
+ mutex_unlock(&info->bl_mutex);
+
+ return ret;
+}
+
static int aty128_bl_get_brightness(struct backlight_device *bd)
{
return bd->props->brightness;
.max_brightness = (FB_BACKLIGHT_LEVELS - 1),
};
+static void aty128_bl_set_power(struct fb_info *info, int power)
+{
+ mutex_lock(&info->bl_mutex);
+ up(&info->bl_dev->sem);
+ info->bl_dev->props->power = power;
+ __aty128_bl_update_status(info->bl_dev);
+ down(&info->bl_dev->sem);
+ mutex_unlock(&info->bl_mutex);
+}
+
static void aty128_bl_init(struct aty128fb_par *par)
{
struct fb_info *info = pci_get_drvdata(par->pdev);
return 0;
#ifdef CONFIG_FB_ATY128_BACKLIGHT
- if (machine_is(powermac) && blank) {
- down(&fb->bl_dev->sem);
- fb->bl_dev->props->power = FB_BLANK_POWERDOWN;
- fb->bl_dev->props->update_status(fb->bl_dev);
- up(&fb->bl_dev->sem);
- }
+ if (machine_is(powermac) && blank)
+ aty128_bl_set_power(fb, FB_BLANK_POWERDOWN);
#endif
if (blank & FB_BLANK_VSYNC_SUSPEND)
aty128_set_crt_enable(par, par->crt_on && !blank);
aty128_set_lcd_enable(par, par->lcd_on && !blank);
}
+
#ifdef CONFIG_FB_ATY128_BACKLIGHT
- if (machine_is(powermac) && !blank) {
- down(&fb->bl_dev->sem);
- fb->bl_dev->props->power = FB_BLANK_UNBLANK;
- fb->bl_dev->props->update_status(fb->bl_dev);
- up(&fb->bl_dev->sem);
- }
+ if (machine_is(powermac) && !blank)
+ aty128_bl_set_power(fb, FB_BLANK_UNBLANK);
#endif
+
return 0;
}
static struct backlight_properties aty_bl_data;
+/* Call with fb_info->bl_mutex held */
static int aty_bl_get_level_brightness(struct atyfb_par *par, int level)
{
struct fb_info *info = pci_get_drvdata(par->pdev);
int atylevel;
/* Get and convert the value */
- mutex_lock(&info->bl_mutex);
atylevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL;
- mutex_unlock(&info->bl_mutex);
if (atylevel < 0)
atylevel = 0;
return atylevel;
}
-static int aty_bl_update_status(struct backlight_device *bd)
+/* Call with fb_info->bl_mutex held */
+static int __aty_bl_update_status(struct backlight_device *bd)
{
struct atyfb_par *par = class_get_devdata(&bd->class_dev);
unsigned int reg = aty_ld_lcd(LCD_MISC_CNTL, par);
return 0;
}
+static int aty_bl_update_status(struct backlight_device *bd)
+{
+ struct atyfb_par *par = class_get_devdata(&bd->class_dev);
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+ int ret;
+
+ mutex_lock(&info->bl_mutex);
+ ret = __aty_bl_update_status(bd);
+ mutex_unlock(&info->bl_mutex);
+
+ return ret;
+}
+
static int aty_bl_get_brightness(struct backlight_device *bd)
{
return bd->props->brightness;
.max_brightness = (FB_BACKLIGHT_LEVELS - 1),
};
+static void aty_bl_set_power(struct fb_info *info, int power)
+{
+ mutex_lock(&info->bl_mutex);
+ up(&info->bl_dev->sem);
+ info->bl_dev->props->power = power;
+ __aty_bl_update_status(info->bl_dev);
+ down(&info->bl_dev->sem);
+ mutex_unlock(&info->bl_mutex);
+}
+
static void aty_bl_init(struct atyfb_par *par)
{
struct fb_info *info = pci_get_drvdata(par->pdev);
return 0;
#ifdef CONFIG_PMAC_BACKLIGHT
- if (machine_is(powermac) && blank > FB_BLANK_NORMAL) {
- mutex_lock(&info->bl_mutex);
- if (info->bl_dev) {
- down(&info->bl_dev->sem);
- info->bl_dev->props->power = FB_BLANK_POWERDOWN;
- info->bl_dev->props->update_status(info->bl_dev);
- up(&info->bl_dev->sem);
- }
- mutex_unlock(&info->bl_mutex);
- }
+ if (machine_is(powermac) && blank > FB_BLANK_NORMAL)
+ aty_bl_set_power(info, FB_BLANK_POWERDOWN);
#elif defined(CONFIG_FB_ATY_GENERIC_LCD)
if (par->lcd_table && blank > FB_BLANK_NORMAL &&
(aty_ld_lcd(LCD_GEN_CNTL, par) & LCD_ON)) {
aty_st_le32(CRTC_GEN_CNTL, gen_cntl, par);
#ifdef CONFIG_PMAC_BACKLIGHT
- if (machine_is(powermac) && blank <= FB_BLANK_NORMAL) {
- mutex_lock(&info->bl_mutex);
- if (info->bl_dev) {
- down(&info->bl_dev->sem);
- info->bl_dev->props->power = FB_BLANK_UNBLANK;
- info->bl_dev->props->update_status(info->bl_dev);
- up(&info->bl_dev->sem);
- }
- mutex_unlock(&info->bl_mutex);
- }
+ if (machine_is(powermac) && blank <= FB_BLANK_NORMAL)
+ aty_bl_set_power(info, FB_BLANK_UNBLANK);
#elif defined(CONFIG_FB_ATY_GENERIC_LCD)
if (par->lcd_table && blank <= FB_BLANK_NORMAL &&
(aty_ld_lcd(LCD_GEN_CNTL, par) & LCD_ON)) {
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/time.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
mutex_lock(&pmac_backlight_mutex);
if (pmac_backlight) {
- down(&pmac_backlight->sem);
-
/* used to disable backlight only for blank > 1, but it seems
* useful at blank = 1 too (saves battery, extends backlight
* life)
*/
+ down(&pmac_backlight->sem);
if (blank)
pmac_backlight->props->power = FB_BLANK_POWERDOWN;
else
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/types.h>
#include <linux/kdev_t.h>
-#include <linux/tty.h>
#include <linux/console.h>
#include <linux/vt_kern.h>
+#include <linux/screen_info.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/delay.h> /* MSch: for IRQ probe */
-#include <linux/tty.h>
#include <linux/console.h>
#include <linux/string.h>
#include <linux/kd.h>
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/tty.h>
#include <linux/console.h>
#include <linux/string.h>
#include <linux/kd.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/errno.h>
-#include <linux/tty.h>
#include <linux/kd.h>
#include <linux/selection.h>
#include <linux/console.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/console.h>
#include <linux/module.h>
#include <linux/string.h>
-#include <linux/tty.h>
#include <linux/fb.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/tty.h>
#include <linux/console.h>
#include <linux/errno.h>
#include <linux/vt_kern.h>
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/kernel.h>
-#include <linux/tty.h>
#include <linux/console.h>
#include <linux/string.h>
#include <linux/kd.h>
#include <linux/spinlock.h>
#include <linux/ioport.h>
#include <linux/init.h>
+#include <linux/screen_info.h>
#include <linux/smp_lock.h>
#include <video/vga.h>
#include <asm/io.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/zorro.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/string.h>
#include <linux/module.h>
-#include <linux/tty.h>
#include <linux/fb.h>
#include <linux/slab.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/mman.h>
-#include <linux/tty.h>
+#include <linux/vt.h>
#include <linux/init.h>
#include <linux/linux_logo.h>
#include <linux/proc_fs.h>
* for more details.
*
*/
-#include <linux/tty.h>
#include <linux/fb.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/screen_info.h>
#include <linux/slab.h>
#include <linux/string.h>
-#include <linux/tty.h>
#include <asm/io.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/pci.h>
#include <linux/vmalloc.h>
#include <linux/pagemap.h>
+#include <linux/screen_info.h>
#include <asm/io.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/mm.h>
#include <linux/errno.h>
#include <linux/string.h>
-#include <linux/tty.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/ioctl.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/nubus.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
--- /dev/null
+# Makefile for the 2700G controller driver.
+
+obj-$(CONFIG_FB_MBX) += mbxfb.o
+obj-$(CONFIG_FB_MBX_DEBUG) += mbxfbdebugfs.o
--- /dev/null
+#include <linux/debugfs.h>
+
+#define BIG_BUFFER_SIZE (1024)
+
+static char big_buffer[BIG_BUFFER_SIZE];
+
+struct mbxfb_debugfs_data {
+ struct dentry *dir;
+ struct dentry *sysconf;
+ struct dentry *clock;
+ struct dentry *display;
+ struct dentry *gsctl;
+};
+
+static int open_file_generic(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->u.generic_ip;
+ return 0;
+}
+
+static ssize_t write_file_dummy(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ return count;
+}
+
+static ssize_t sysconf_read_file(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ char * s = big_buffer;
+
+ s += sprintf(s, "SYSCFG = %08lx\n", SYSCFG);
+ s += sprintf(s, "PFBASE = %08lx\n", PFBASE);
+ s += sprintf(s, "PFCEIL = %08lx\n", PFCEIL);
+ s += sprintf(s, "POLLFLAG = %08lx\n", POLLFLAG);
+ s += sprintf(s, "SYSRST = %08lx\n", SYSRST);
+
+ return simple_read_from_buffer(userbuf, count, ppos,
+ big_buffer, s-big_buffer);
+}
+
+
+static ssize_t gsctl_read_file(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ char * s = big_buffer;
+
+ s += sprintf(s, "GSCTRL = %08lx\n", GSCTRL);
+ s += sprintf(s, "VSCTRL = %08lx\n", VSCTRL);
+ s += sprintf(s, "GBBASE = %08lx\n", GBBASE);
+ s += sprintf(s, "VBBASE = %08lx\n", VBBASE);
+ s += sprintf(s, "GDRCTRL = %08lx\n", GDRCTRL);
+ s += sprintf(s, "VCMSK = %08lx\n", VCMSK);
+ s += sprintf(s, "GSCADR = %08lx\n", GSCADR);
+ s += sprintf(s, "VSCADR = %08lx\n", VSCADR);
+ s += sprintf(s, "VUBASE = %08lx\n", VUBASE);
+ s += sprintf(s, "VVBASE = %08lx\n", VVBASE);
+ s += sprintf(s, "GSADR = %08lx\n", GSADR);
+ s += sprintf(s, "VSADR = %08lx\n", VSADR);
+ s += sprintf(s, "HCCTRL = %08lx\n", HCCTRL);
+ s += sprintf(s, "HCSIZE = %08lx\n", HCSIZE);
+ s += sprintf(s, "HCPOS = %08lx\n", HCPOS);
+ s += sprintf(s, "HCBADR = %08lx\n", HCBADR);
+ s += sprintf(s, "HCCKMSK = %08lx\n", HCCKMSK);
+ s += sprintf(s, "GPLUT = %08lx\n", GPLUT);
+
+ return simple_read_from_buffer(userbuf, count, ppos,
+ big_buffer, s-big_buffer);
+}
+
+static ssize_t display_read_file(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ char * s = big_buffer;
+
+ s += sprintf(s, "DSCTRL = %08lx\n", DSCTRL);
+ s += sprintf(s, "DHT01 = %08lx\n", DHT01);
+ s += sprintf(s, "DHT02 = %08lx\n", DHT02);
+ s += sprintf(s, "DHT03 = %08lx\n", DHT03);
+ s += sprintf(s, "DVT01 = %08lx\n", DVT01);
+ s += sprintf(s, "DVT02 = %08lx\n", DVT02);
+ s += sprintf(s, "DVT03 = %08lx\n", DVT03);
+ s += sprintf(s, "DBCOL = %08lx\n", DBCOL);
+ s += sprintf(s, "BGCOLOR = %08lx\n", BGCOLOR);
+ s += sprintf(s, "DINTRS = %08lx\n", DINTRS);
+ s += sprintf(s, "DINTRE = %08lx\n", DINTRE);
+ s += sprintf(s, "DINTRCNT = %08lx\n", DINTRCNT);
+ s += sprintf(s, "DSIG = %08lx\n", DSIG);
+ s += sprintf(s, "DMCTRL = %08lx\n", DMCTRL);
+ s += sprintf(s, "CLIPCTRL = %08lx\n", CLIPCTRL);
+ s += sprintf(s, "SPOCTRL = %08lx\n", SPOCTRL);
+ s += sprintf(s, "SVCTRL = %08lx\n", SVCTRL);
+ s += sprintf(s, "DLSTS = %08lx\n", DLSTS);
+ s += sprintf(s, "DLLCTRL = %08lx\n", DLLCTRL);
+ s += sprintf(s, "DVLNUM = %08lx\n", DVLNUM);
+ s += sprintf(s, "DUCTRL = %08lx\n", DUCTRL);
+ s += sprintf(s, "DVECTRL = %08lx\n", DVECTRL);
+ s += sprintf(s, "DHDET = %08lx\n", DHDET);
+ s += sprintf(s, "DVDET = %08lx\n", DVDET);
+ s += sprintf(s, "DODMSK = %08lx\n", DODMSK);
+ s += sprintf(s, "CSC01 = %08lx\n", CSC01);
+ s += sprintf(s, "CSC02 = %08lx\n", CSC02);
+ s += sprintf(s, "CSC03 = %08lx\n", CSC03);
+ s += sprintf(s, "CSC04 = %08lx\n", CSC04);
+ s += sprintf(s, "CSC05 = %08lx\n", CSC05);
+
+ return simple_read_from_buffer(userbuf, count, ppos,
+ big_buffer, s-big_buffer);
+}
+
+static ssize_t clock_read_file(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ char * s = big_buffer;
+
+ s += sprintf(s, "SYSCLKSRC = %08lx\n", SYSCLKSRC);
+ s += sprintf(s, "PIXCLKSRC = %08lx\n", PIXCLKSRC);
+ s += sprintf(s, "CLKSLEEP = %08lx\n", CLKSLEEP);
+ s += sprintf(s, "COREPLL = %08lx\n", COREPLL);
+ s += sprintf(s, "DISPPLL = %08lx\n", DISPPLL);
+ s += sprintf(s, "PLLSTAT = %08lx\n", PLLSTAT);
+ s += sprintf(s, "VOVRCLK = %08lx\n", VOVRCLK);
+ s += sprintf(s, "PIXCLK = %08lx\n", PIXCLK);
+ s += sprintf(s, "MEMCLK = %08lx\n", MEMCLK);
+ s += sprintf(s, "M24CLK = %08lx\n", M24CLK);
+ s += sprintf(s, "MBXCLK = %08lx\n", MBXCLK);
+ s += sprintf(s, "SDCLK = %08lx\n", SDCLK);
+ s += sprintf(s, "PIXCLKDIV = %08lx\n", PIXCLKDIV);
+
+ return simple_read_from_buffer(userbuf, count, ppos,
+ big_buffer, s-big_buffer);
+}
+
+static struct file_operations sysconf_fops = {
+ .read = sysconf_read_file,
+ .write = write_file_dummy,
+ .open = open_file_generic,
+};
+
+static struct file_operations clock_fops = {
+ .read = clock_read_file,
+ .write = write_file_dummy,
+ .open = open_file_generic,
+};
+
+static struct file_operations display_fops = {
+ .read = display_read_file,
+ .write = write_file_dummy,
+ .open = open_file_generic,
+};
+
+static struct file_operations gsctl_fops = {
+ .read = gsctl_read_file,
+ .write = write_file_dummy,
+ .open = open_file_generic,
+};
+
+
+static void __devinit mbxfb_debugfs_init(struct fb_info *fbi)
+{
+ struct mbxfb_info *mfbi = fbi->par;
+ struct mbxfb_debugfs_data *dbg;
+
+ dbg = kzalloc(sizeof(struct mbxfb_debugfs_data), GFP_KERNEL);
+ mfbi->debugfs_data = dbg;
+
+ dbg->dir = debugfs_create_dir("mbxfb", NULL);
+ dbg->sysconf = debugfs_create_file("sysconf", 0444, dbg->dir,
+ fbi, &sysconf_fops);
+ dbg->clock = debugfs_create_file("clock", 0444, dbg->dir,
+ fbi, &clock_fops);
+ dbg->display = debugfs_create_file("display", 0444, dbg->dir,
+ fbi, &display_fops);
+ dbg->gsctl = debugfs_create_file("gsctl", 0444, dbg->dir,
+ fbi, &gsctl_fops);
+}
+
+static void __devexit mbxfb_debugfs_remove(struct fb_info *fbi)
+{
+ struct mbxfb_info *mfbi = fbi->par;
+ struct mbxfb_debugfs_data *dbg = mfbi->debugfs_data;
+
+ debugfs_remove(dbg->gsctl);
+ debugfs_remove(dbg->display);
+ debugfs_remove(dbg->clock);
+ debugfs_remove(dbg->sysconf);
+ debugfs_remove(dbg->dir);
+}
--- /dev/null
+/*
+ * linux/drivers/video/mbx/mbxfb.c
+ *
+ * Copyright (C) 2006 Compulab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * Based on pxafb.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Intel 2700G (Marathon) Graphics Accelerator Frame Buffer Driver
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+
+#include <video/mbxfb.h>
+
+#include "regs.h"
+#include "reg_bits.h"
+
+static unsigned long virt_base_2700;
+
+#define MIN_XRES 16
+#define MIN_YRES 16
+#define MAX_XRES 2048
+#define MAX_YRES 2048
+
+#define MAX_PALETTES 16
+
+/* FIXME: take care of different chip revisions with different sizes
+ of ODFB */
+#define MEMORY_OFFSET 0x60000
+
+struct mbxfb_info {
+ struct device *dev;
+
+ struct resource *fb_res;
+ struct resource *fb_req;
+
+ struct resource *reg_res;
+ struct resource *reg_req;
+
+ void __iomem *fb_virt_addr;
+ unsigned long fb_phys_addr;
+
+ void __iomem *reg_virt_addr;
+ unsigned long reg_phys_addr;
+
+ int (*platform_probe) (struct fb_info * fb);
+ int (*platform_remove) (struct fb_info * fb);
+
+ u32 pseudo_palette[MAX_PALETTES];
+#ifdef CONFIG_FB_MBX_DEBUG
+ void *debugfs_data;
+#endif
+
+};
+
+static struct fb_var_screeninfo mbxfb_default __devinitdata = {
+ .xres = 640,
+ .yres = 480,
+ .xres_virtual = 640,
+ .yres_virtual = 480,
+ .bits_per_pixel = 16,
+ .red = {11, 5, 0},
+ .green = {5, 6, 0},
+ .blue = {0, 5, 0},
+ .activate = FB_ACTIVATE_TEST,
+ .height = -1,
+ .width = -1,
+ .pixclock = 40000,
+ .left_margin = 48,
+ .right_margin = 16,
+ .upper_margin = 33,
+ .lower_margin = 10,
+ .hsync_len = 96,
+ .vsync_len = 2,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct fb_fix_screeninfo mbxfb_fix __devinitdata = {
+ .id = "MBX",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_TRUECOLOR,
+ .xpanstep = 0,
+ .ypanstep = 0,
+ .ywrapstep = 0,
+ .accel = FB_ACCEL_NONE,
+};
+
+struct pixclock_div {
+ u8 m;
+ u8 n;
+ u8 p;
+};
+
+static unsigned int mbxfb_get_pixclock(unsigned int pixclock_ps,
+ struct pixclock_div *div)
+{
+ u8 m, n, p;
+ unsigned int err = 0;
+ unsigned int min_err = ~0x0;
+ unsigned int clk;
+ unsigned int best_clk = 0;
+ unsigned int ref_clk = 13000; /* FIXME: take from platform data */
+ unsigned int pixclock;
+
+ /* convert pixclock to KHz */
+ pixclock = PICOS2KHZ(pixclock_ps);
+
+ for (m = 1; m < 64; m++) {
+ for (n = 1; n < 8; n++) {
+ for (p = 0; p < 8; p++) {
+ clk = (ref_clk * m) / (n * (1 << p));
+ err = (clk > pixclock) ? (clk - pixclock) :
+ (pixclock - clk);
+ if (err < min_err) {
+ min_err = err;
+ best_clk = clk;
+ div->m = m;
+ div->n = n;
+ div->p = p;
+ }
+ }
+ }
+ }
+ return KHZ2PICOS(best_clk);
+}
+
+static int mbxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+ u_int trans, struct fb_info *info)
+{
+ u32 val, ret = 1;
+
+ if (regno < MAX_PALETTES) {
+ u32 *pal = info->pseudo_palette;
+
+ val = (red & 0xf800) | ((green & 0xfc00) >> 5) |
+ ((blue & 0xf800) >> 11);
+ pal[regno] = val;
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static int mbxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ struct pixclock_div div;
+
+ var->pixclock = mbxfb_get_pixclock(var->pixclock, &div);
+
+ if (var->xres < MIN_XRES)
+ var->xres = MIN_XRES;
+ if (var->yres < MIN_YRES)
+ var->yres = MIN_YRES;
+ if (var->xres > MAX_XRES)
+ return -EINVAL;
+ if (var->yres > MAX_YRES)
+ return -EINVAL;
+ var->xres_virtual = max(var->xres_virtual, var->xres);
+ var->yres_virtual = max(var->yres_virtual, var->yres);
+
+ switch (var->bits_per_pixel) {
+ /* 8 bits-per-pixel is not supported yet */
+ case 8:
+ return -EINVAL;
+ case 16:
+ var->green.length = (var->green.length == 5) ? 5 : 6;
+ var->red.length = 5;
+ var->blue.length = 5;
+ var->transp.length = 6 - var->green.length;
+ var->blue.offset = 0;
+ var->green.offset = 5;
+ var->red.offset = 5 + var->green.length;
+ var->transp.offset = (5 + var->red.offset) & 15;
+ break;
+ case 24: /* RGB 888 */
+ case 32: /* RGBA 8888 */
+ var->red.offset = 16;
+ var->red.length = 8;
+ var->green.offset = 8;
+ var->green.length = 8;
+ var->blue.offset = 0;
+ var->blue.length = 8;
+ var->transp.length = var->bits_per_pixel - 24;
+ var->transp.offset = (var->transp.length) ? 24 : 0;
+ break;
+ }
+ var->red.msb_right = 0;
+ var->green.msb_right = 0;
+ var->blue.msb_right = 0;
+ var->transp.msb_right = 0;
+
+ return 0;
+}
+
+static int mbxfb_set_par(struct fb_info *info)
+{
+ struct fb_var_screeninfo *var = &info->var;
+ struct pixclock_div div;
+ ushort hbps, ht, hfps, has;
+ ushort vbps, vt, vfps, vas;
+ u32 gsctrl = readl(GSCTRL);
+ u32 gsadr = readl(GSADR);
+
+ info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
+
+ /* setup color mode */
+ gsctrl &= ~(FMsk(GSCTRL_GPIXFMT));
+ /* FIXME: add *WORKING* support for 8-bits per color */
+ if (info->var.bits_per_pixel == 8) {
+ return -EINVAL;
+ } else {
+ fb_dealloc_cmap(&info->cmap);
+ gsctrl &= ~GSCTRL_LUT_EN;
+
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ switch (info->var.bits_per_pixel) {
+ case 16:
+ if (info->var.green.length == 5)
+ gsctrl |= GSCTRL_GPIXFMT_ARGB1555;
+ else
+ gsctrl |= GSCTRL_GPIXFMT_RGB565;
+ break;
+ case 24:
+ gsctrl |= GSCTRL_GPIXFMT_RGB888;
+ break;
+ case 32:
+ gsctrl |= GSCTRL_GPIXFMT_ARGB8888;
+ break;
+ }
+ }
+
+ /* setup resolution */
+ gsctrl &= ~(FMsk(GSCTRL_GSWIDTH) | FMsk(GSCTRL_GSHEIGHT));
+ gsctrl |= Gsctrl_Width(info->var.xres - 1) |
+ Gsctrl_Height(info->var.yres - 1);
+ writel(gsctrl, GSCTRL);
+ udelay(1000);
+
+ gsadr &= ~(FMsk(GSADR_SRCSTRIDE));
+ gsadr |= Gsadr_Srcstride(info->var.xres * info->var.bits_per_pixel /
+ (8 * 16) - 1);
+ writel(gsadr, GSADR);
+ udelay(1000);
+
+ /* setup timings */
+ var->pixclock = mbxfb_get_pixclock(info->var.pixclock, &div);
+
+ writel((Disp_Pll_M(div.m) | Disp_Pll_N(div.n) |
+ Disp_Pll_P(div.p) | DISP_PLL_EN), DISPPLL);
+
+ hbps = var->hsync_len;
+ has = hbps + var->left_margin;
+ hfps = has + var->xres;
+ ht = hfps + var->right_margin;
+
+ vbps = var->vsync_len;
+ vas = vbps + var->upper_margin;
+ vfps = vas + var->yres;
+ vt = vfps + var->lower_margin;
+
+ writel((Dht01_Hbps(hbps) | Dht01_Ht(ht)), DHT01);
+ writel((Dht02_Hlbs(has) | Dht02_Has(has)), DHT02);
+ writel((Dht03_Hfps(hfps) | Dht03_Hrbs(hfps)), DHT03);
+ writel((Dhdet_Hdes(has) | Dhdet_Hdef(hfps)), DHDET);
+
+ writel((Dvt01_Vbps(vbps) | Dvt01_Vt(vt)), DVT01);
+ writel((Dvt02_Vtbs(vas) | Dvt02_Vas(vas)), DVT02);
+ writel((Dvt03_Vfps(vfps) | Dvt03_Vbbs(vfps)), DVT03);
+ writel((Dvdet_Vdes(vas) | Dvdet_Vdef(vfps)), DVDET);
+ writel((Dvectrl_Vevent(vfps) | Dvectrl_Vfetch(vbps)), DVECTRL);
+
+ writel((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
+
+ return 0;
+}
+
+static int mbxfb_blank(int blank, struct fb_info *info)
+{
+ switch (blank) {
+ case FB_BLANK_POWERDOWN:
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_NORMAL:
+ writel((readl(DSCTRL) & ~DSCTRL_SYNCGEN_EN), DSCTRL);
+ udelay(1000);
+ writel((readl(PIXCLK) & ~PIXCLK_EN), PIXCLK);
+ udelay(1000);
+ writel((readl(VOVRCLK) & ~VOVRCLK_EN), VOVRCLK);
+ udelay(1000);
+ break;
+ case FB_BLANK_UNBLANK:
+ writel((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
+ udelay(1000);
+ writel((readl(PIXCLK) | PIXCLK_EN), PIXCLK);
+ udelay(1000);
+ break;
+ }
+ return 0;
+}
+
+static struct fb_ops mbxfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = mbxfb_check_var,
+ .fb_set_par = mbxfb_set_par,
+ .fb_setcolreg = mbxfb_setcolreg,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_blank = mbxfb_blank,
+};
+
+/*
+ Enable external SDRAM controller. Assume that all clocks are active
+ by now.
+*/
+static void __devinit setup_memc(struct fb_info *fbi)
+{
+ struct mbxfb_info *mfbi = fbi->par;
+ unsigned long tmp;
+ int i;
+
+ /* FIXME: use platfrom specific parameters */
+ /* setup SDRAM controller */
+ writel((LMCFG_LMC_DS | LMCFG_LMC_TS | LMCFG_LMD_TS |
+ LMCFG_LMA_TS),
+ LMCFG);
+ udelay(1000);
+
+ writel(LMPWR_MC_PWR_ACT, LMPWR);
+ udelay(1000);
+
+ /* setup SDRAM timings */
+ writel((Lmtim_Tras(7) | Lmtim_Trp(3) | Lmtim_Trcd(3) |
+ Lmtim_Trc(9) | Lmtim_Tdpl(2)),
+ LMTIM);
+ udelay(1000);
+ /* setup SDRAM refresh rate */
+ writel(0xc2b, LMREFRESH);
+ udelay(1000);
+ /* setup SDRAM type parameters */
+ writel((LMTYPE_CASLAT_3 | LMTYPE_BKSZ_2 | LMTYPE_ROWSZ_11 |
+ LMTYPE_COLSZ_8),
+ LMTYPE);
+ udelay(1000);
+ /* enable memory controller */
+ writel(LMPWR_MC_PWR_ACT, LMPWR);
+ udelay(1000);
+
+ /* perform dummy reads */
+ for ( i = 0; i < 16; i++ ) {
+ tmp = readl(fbi->screen_base);
+ }
+}
+
+static void enable_clocks(struct fb_info *fbi)
+{
+ /* enable clocks */
+ writel(SYSCLKSRC_PLL_2, SYSCLKSRC);
+ udelay(1000);
+ writel(PIXCLKSRC_PLL_1, PIXCLKSRC);
+ udelay(1000);
+ writel(0x00000000, CLKSLEEP);
+ udelay(1000);
+ writel((Core_Pll_M(0x17) | Core_Pll_N(0x3) | Core_Pll_P(0x0) |
+ CORE_PLL_EN),
+ COREPLL);
+ udelay(1000);
+ writel((Disp_Pll_M(0x1b) | Disp_Pll_N(0x7) | Disp_Pll_P(0x1) |
+ DISP_PLL_EN),
+ DISPPLL);
+
+ writel(0x00000000, VOVRCLK);
+ udelay(1000);
+ writel(PIXCLK_EN, PIXCLK);
+ udelay(1000);
+ writel(MEMCLK_EN, MEMCLK);
+ udelay(1000);
+ writel(0x00000006, M24CLK);
+ udelay(1000);
+ writel(0x00000006, MBXCLK);
+ udelay(1000);
+ writel(SDCLK_EN, SDCLK);
+ udelay(1000);
+ writel(0x00000001, PIXCLKDIV);
+ udelay(1000);
+}
+
+static void __devinit setup_graphics(struct fb_info *fbi)
+{
+ unsigned long gsctrl;
+
+ gsctrl = GSCTRL_GAMMA_EN | Gsctrl_Width(fbi->var.xres - 1) |
+ Gsctrl_Height(fbi->var.yres - 1);
+ switch (fbi->var.bits_per_pixel) {
+ case 16:
+ if (fbi->var.green.length == 5)
+ gsctrl |= GSCTRL_GPIXFMT_ARGB1555;
+ else
+ gsctrl |= GSCTRL_GPIXFMT_RGB565;
+ break;
+ case 24:
+ gsctrl |= GSCTRL_GPIXFMT_RGB888;
+ break;
+ case 32:
+ gsctrl |= GSCTRL_GPIXFMT_ARGB8888;
+ break;
+ }
+
+ writel(gsctrl, GSCTRL);
+ udelay(1000);
+ writel(0x00000000, GBBASE);
+ udelay(1000);
+ writel(0x00ffffff, GDRCTRL);
+ udelay(1000);
+ writel((GSCADR_STR_EN | Gscadr_Gbase_Adr(0x6000)), GSCADR);
+ udelay(1000);
+ writel(0x00000000, GPLUT);
+ udelay(1000);
+}
+
+static void __devinit setup_display(struct fb_info *fbi)
+{
+ unsigned long dsctrl = 0;
+
+ dsctrl = DSCTRL_BLNK_POL;
+ if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT)
+ dsctrl |= DSCTRL_HS_POL;
+ if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
+ dsctrl |= DSCTRL_VS_POL;
+ writel(dsctrl, DSCTRL);
+ udelay(1000);
+ writel(0xd0303010, DMCTRL);
+ udelay(1000);
+ writel((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
+}
+
+static void __devinit enable_controller(struct fb_info *fbi)
+{
+ writel(SYSRST_RST, SYSRST);
+ udelay(1000);
+
+
+ enable_clocks(fbi);
+ setup_memc(fbi);
+ setup_graphics(fbi);
+ setup_display(fbi);
+}
+
+#ifdef CONFIG_PM
+/*
+ * Power management hooks. Note that we won't be called from IRQ context,
+ * unlike the blank functions above, so we may sleep.
+ */
+static int mbxfb_suspend(struct platform_device *dev, pm_message_t state)
+{
+ /* make frame buffer memory enter self-refresh mode */
+ writel(LMPWR_MC_PWR_SRM, LMPWR);
+ while (LMPWRSTAT != LMPWRSTAT_MC_PWR_SRM)
+ ; /* empty statement */
+
+ /* reset the device, since it's initial state is 'mostly sleeping' */
+ writel(SYSRST_RST, SYSRST);
+ return 0;
+}
+
+static int mbxfb_resume(struct platform_device *dev)
+{
+ struct fb_info *fbi = platform_get_drvdata(dev);
+
+ enable_clocks(fbi);
+/* setup_graphics(fbi); */
+/* setup_display(fbi); */
+
+ writel((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
+ return 0;
+}
+#else
+#define mbxfb_suspend NULL
+#define mbxfb_resume NULL
+#endif
+
+/* debugfs entries */
+#ifndef CONFIG_FB_MBX_DEBUG
+#define mbxfb_debugfs_init(x) do {} while(0)
+#define mbxfb_debugfs_remove(x) do {} while(0)
+#endif
+
+#define res_size(_r) (((_r)->end - (_r)->start) + 1)
+
+static int __devinit mbxfb_probe(struct platform_device *dev)
+{
+ int ret;
+ struct fb_info *fbi;
+ struct mbxfb_info *mfbi;
+ struct mbxfb_platform_data *pdata;
+
+ dev_dbg(dev, "mbxfb_probe\n");
+
+ fbi = framebuffer_alloc(sizeof(struct mbxfb_info), &dev->dev);
+ if (fbi == NULL) {
+ dev_err(&dev->dev, "framebuffer_alloc failed\n");
+ return -ENOMEM;
+ }
+
+ mfbi = fbi->par;
+ fbi->pseudo_palette = mfbi->pseudo_palette;
+ pdata = dev->dev.platform_data;
+ if (pdata->probe)
+ mfbi->platform_probe = pdata->probe;
+ if (pdata->remove)
+ mfbi->platform_remove = pdata->remove;
+
+ mfbi->fb_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ mfbi->reg_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
+
+ if (!mfbi->fb_res || !mfbi->reg_res) {
+ dev_err(&dev->dev, "no resources found\n");
+ ret = -ENODEV;
+ goto err1;
+ }
+
+ mfbi->fb_req = request_mem_region(mfbi->fb_res->start,
+ res_size(mfbi->fb_res), dev->name);
+ if (mfbi->fb_req == NULL) {
+ dev_err(&dev->dev, "failed to claim framebuffer memory\n");
+ ret = -EINVAL;
+ goto err1;
+ }
+ mfbi->fb_phys_addr = mfbi->fb_res->start;
+
+ mfbi->reg_req = request_mem_region(mfbi->reg_res->start,
+ res_size(mfbi->reg_res), dev->name);
+ if (mfbi->reg_req == NULL) {
+ dev_err(&dev->dev, "failed to claim Marathon registers\n");
+ ret = -EINVAL;
+ goto err2;
+ }
+ mfbi->reg_phys_addr = mfbi->reg_res->start;
+
+ mfbi->reg_virt_addr = ioremap_nocache(mfbi->reg_phys_addr,
+ res_size(mfbi->reg_req));
+ if (!mfbi->reg_virt_addr) {
+ dev_err(&dev->dev, "failed to ioremap Marathon registers\n");
+ ret = -EINVAL;
+ goto err3;
+ }
+ virt_base_2700 = (unsigned long)mfbi->reg_virt_addr;
+
+ mfbi->fb_virt_addr = ioremap_nocache(mfbi->fb_phys_addr,
+ res_size(mfbi->fb_req));
+ if (!mfbi->reg_virt_addr) {
+ dev_err(&dev->dev, "failed to ioremap frame buffer\n");
+ ret = -EINVAL;
+ goto err4;
+ }
+
+ /* FIXME: get from platform */
+ fbi->screen_base = (char __iomem *)(mfbi->fb_virt_addr + 0x60000);
+ fbi->screen_size = 8 * 1024 * 1024; /* 8 Megs */
+ fbi->fbops = &mbxfb_ops;
+
+ fbi->var = mbxfb_default;
+ fbi->fix = mbxfb_fix;
+ fbi->fix.smem_start = mfbi->fb_phys_addr + 0x60000;
+ fbi->fix.smem_len = 8 * 1024 * 1024;
+ fbi->fix.line_length = 640 * 2;
+
+ ret = fb_alloc_cmap(&fbi->cmap, 256, 0);
+ if (ret < 0) {
+ dev_err(&dev->dev, "fb_alloc_cmap failed\n");
+ ret = -EINVAL;
+ goto err5;
+ }
+
+ platform_set_drvdata(dev, fbi);
+
+ printk(KERN_INFO "fb%d: mbx frame buffer device\n", fbi->node);
+
+ if (mfbi->platform_probe)
+ mfbi->platform_probe(fbi);
+
+ enable_controller(fbi);
+
+ mbxfb_debugfs_init(fbi);
+
+ ret = register_framebuffer(fbi);
+ if (ret < 0) {
+ dev_err(&dev->dev, "register_framebuffer failed\n");
+ ret = -EINVAL;
+ goto err6;
+ }
+
+ return 0;
+
+err6:
+ fb_dealloc_cmap(&fbi->cmap);
+err5:
+ iounmap(mfbi->fb_virt_addr);
+err4:
+ iounmap(mfbi->reg_virt_addr);
+err3:
+ release_mem_region(mfbi->reg_res->start, res_size(mfbi->reg_res));
+err2:
+ release_mem_region(mfbi->fb_res->start, res_size(mfbi->fb_res));
+err1:
+ framebuffer_release(fbi);
+
+ return ret;
+}
+
+static int __devexit mbxfb_remove(struct platform_device *dev)
+{
+ struct fb_info *fbi = platform_get_drvdata(dev);
+
+ writel(SYSRST_RST, SYSRST);
+ udelay(1000);
+
+ mbxfb_debugfs_remove(fbi);
+
+ if (fbi) {
+ struct mbxfb_info *mfbi = fbi->par;
+
+ unregister_framebuffer(fbi);
+ if (mfbi) {
+ if (mfbi->platform_remove)
+ mfbi->platform_remove(fbi);
+
+ if (mfbi->fb_virt_addr)
+ iounmap(mfbi->fb_virt_addr);
+ if (mfbi->reg_virt_addr)
+ iounmap(mfbi->reg_virt_addr);
+ if (mfbi->reg_req)
+ release_mem_region(mfbi->reg_req->start,
+ res_size(mfbi->reg_req));
+ if (mfbi->fb_req)
+ release_mem_region(mfbi->fb_req->start,
+ res_size(mfbi->fb_req));
+ }
+ framebuffer_release(fbi);
+ }
+
+ return 0;
+}
+
+static struct platform_driver mbxfb_driver = {
+ .probe = mbxfb_probe,
+ .remove = mbxfb_remove,
+ .suspend = mbxfb_suspend,
+ .resume = mbxfb_resume,
+ .driver = {
+ .name = "mbx-fb",
+ },
+};
+
+int __devinit mbxfb_init(void)
+{
+ return platform_driver_register(&mbxfb_driver);
+}
+
+static void __devexit mbxfb_exit(void)
+{
+ platform_driver_unregister(&mbxfb_driver);
+}
+
+module_init(mbxfb_init);
+module_exit(mbxfb_exit);
+
+MODULE_DESCRIPTION("loadable framebuffer driver for Marathon device");
+MODULE_AUTHOR("Mike Rapoport, Compulab");
+MODULE_LICENSE("GPL");
--- /dev/null
+#ifndef __REG_BITS_2700G_
+#define __REG_BITS_2700G_
+
+/* use defines from asm-arm/arch-pxa/bitfields.h for bit fields access */
+#define UData(Data) ((unsigned long) (Data))
+#define Fld(Size, Shft) (((Size) << 16) + (Shft))
+#define FSize(Field) ((Field) >> 16)
+#define FShft(Field) ((Field) & 0x0000FFFF)
+#define FMsk(Field) (((UData (1) << FSize (Field)) - 1) << FShft (Field))
+#define FAlnMsk(Field) ((UData (1) << FSize (Field)) - 1)
+#define F1stBit(Field) (UData (1) << FShft (Field))
+
+#define SYSRST_RST (1 << 0)
+
+/* SYSCLKSRC - SYSCLK Source Control Register */
+#define SYSCLKSRC_SEL Fld(2,0)
+#define SYSCLKSRC_REF ((0x0) << FShft(SYSCLKSRC_SEL))
+#define SYSCLKSRC_PLL_1 ((0x1) << FShft(SYSCLKSRC_SEL))
+#define SYSCLKSRC_PLL_2 ((0x2) << FShft(SYSCLKSRC_SEL))
+
+/* PIXCLKSRC - PIXCLK Source Control Register */
+#define PIXCLKSRC_SEL Fld(2,0)
+#define PIXCLKSRC_REF ((0x0) << FShft(PIXCLKSRC_SEL))
+#define PIXCLKSRC_PLL_1 ((0x1) << FShft(PIXCLKSRC_SEL))
+#define PIXCLKSRC_PLL_2 ((0x2) << FShft(PIXCLKSRC_SEL))
+
+/* Clock Disable Register */
+#define CLKSLEEP_SLP (1 << 0)
+
+/* Core PLL Control Register */
+#define CORE_PLL_M Fld(6,7)
+#define Core_Pll_M(x) ((x) << FShft(CORE_PLL_M))
+#define CORE_PLL_N Fld(3,4)
+#define Core_Pll_N(x) ((x) << FShft(CORE_PLL_N))
+#define CORE_PLL_P Fld(3,1)
+#define Core_Pll_P(x) ((x) << FShft(CORE_PLL_P))
+#define CORE_PLL_EN (1 << 0)
+
+/* Display PLL Control Register */
+#define DISP_PLL_M Fld(6,7)
+#define Disp_Pll_M(x) ((x) << FShft(DISP_PLL_M))
+#define DISP_PLL_N Fld(3,4)
+#define Disp_Pll_N(x) ((x) << FShft(DISP_PLL_N))
+#define DISP_PLL_P Fld(3,1)
+#define Disp_Pll_P(x) ((x) << FShft(DISP_PLL_P))
+#define DISP_PLL_EN (1 << 0)
+
+/* PLL status register */
+#define PLLSTAT_CORE_PLL_LOST_L (1 << 3)
+#define PLLSTAT_CORE_PLL_LSTS (1 << 2)
+#define PLLSTAT_DISP_PLL_LOST_L (1 << 1)
+#define PLLSTAT_DISP_PLL_LSTS (1 << 0)
+
+/* Video and scale clock control register */
+#define VOVRCLK_EN (1 << 0)
+
+/* Pixel clock control register */
+#define PIXCLK_EN (1 << 0)
+
+/* Memory clock control register */
+#define MEMCLK_EN (1 << 0)
+
+/* MBX clock control register */
+#define MBXCLK_DIV Fld(2,2)
+#define MBXCLK_DIV_1 ((0x0) << FShft(MBXCLK_DIV))
+#define MBXCLK_DIV_2 ((0x1) << FShft(MBXCLK_DIV))
+#define MBXCLK_DIV_3 ((0x2) << FShft(MBXCLK_DIV))
+#define MBXCLK_DIV_4 ((0x3) << FShft(MBXCLK_DIV))
+#define MBXCLK_EN Fld(2,0)
+#define MBXCLK_EN_NONE ((0x0) << FShft(MBXCLK_EN))
+#define MBXCLK_EN_2D ((0x1) << FShft(MBXCLK_EN))
+#define MBXCLK_EN_BOTH ((0x2) << FShft(MBXCLK_EN))
+
+/* M24 clock control register */
+#define M24CLK_DIV Fld(2,1)
+#define M24CLK_DIV_1 ((0x0) << FShft(M24CLK_DIV))
+#define M24CLK_DIV_2 ((0x1) << FShft(M24CLK_DIV))
+#define M24CLK_DIV_3 ((0x2) << FShft(M24CLK_DIV))
+#define M24CLK_DIV_4 ((0x3) << FShft(M24CLK_DIV))
+#define M24CLK_EN (1 << 0)
+
+/* SDRAM clock control register */
+#define SDCLK_EN (1 << 0)
+
+/* PixClk Divisor Register */
+#define PIXCLKDIV_PD Fld(9,0)
+#define Pixclkdiv_Pd(x) ((x) << FShft(PIXCLKDIV_PD))
+
+/* LCD Config control register */
+#define LCDCFG_IN_FMT Fld(3,28)
+#define Lcdcfg_In_Fmt(x) ((x) << FShft(LCDCFG_IN_FMT))
+#define LCDCFG_LCD1DEN_POL (1 << 27)
+#define LCDCFG_LCD1FCLK_POL (1 << 26)
+#define LCDCFG_LCD1LCLK_POL (1 << 25)
+#define LCDCFG_LCD1D_POL (1 << 24)
+#define LCDCFG_LCD2DEN_POL (1 << 23)
+#define LCDCFG_LCD2FCLK_POL (1 << 22)
+#define LCDCFG_LCD2LCLK_POL (1 << 21)
+#define LCDCFG_LCD2D_POL (1 << 20)
+#define LCDCFG_LCD1_TS (1 << 19)
+#define LCDCFG_LCD1D_DS (1 << 18)
+#define LCDCFG_LCD1C_DS (1 << 17)
+#define LCDCFG_LCD1_IS_IN (1 << 16)
+#define LCDCFG_LCD2_TS (1 << 3)
+#define LCDCFG_LCD2D_DS (1 << 2)
+#define LCDCFG_LCD2C_DS (1 << 1)
+#define LCDCFG_LCD2_IS_IN (1 << 0)
+
+/* On-Die Frame Buffer Power Control Register */
+#define ODFBPWR_SLOW (1 << 2)
+#define ODFBPWR_MODE Fld(2,0)
+#define ODFBPWR_MODE_ACT ((0x0) << FShft(ODFBPWR_MODE))
+#define ODFBPWR_MODE_ACT_LP ((0x1) << FShft(ODFBPWR_MODE))
+#define ODFBPWR_MODE_SLEEP ((0x2) << FShft(ODFBPWR_MODE))
+#define ODFBPWR_MODE_SHUTD ((0x3) << FShft(ODFBPWR_MODE))
+
+/* On-Die Frame Buffer Power State Status Register */
+#define ODFBSTAT_ACT (1 << 2)
+#define ODFBSTAT_SLP (1 << 1)
+#define ODFBSTAT_SDN (1 << 0)
+
+/* LMRST - Local Memory (SDRAM) Reset */
+#define LMRST_MC_RST (1 << 0)
+
+/* LMCFG - Local Memory (SDRAM) Configuration Register */
+#define LMCFG_LMC_DS (1 << 5)
+#define LMCFG_LMD_DS (1 << 4)
+#define LMCFG_LMA_DS (1 << 3)
+#define LMCFG_LMC_TS (1 << 2)
+#define LMCFG_LMD_TS (1 << 1)
+#define LMCFG_LMA_TS (1 << 0)
+
+/* LMPWR - Local Memory (SDRAM) Power Control Register */
+#define LMPWR_MC_PWR_CNT Fld(2,0)
+#define LMPWR_MC_PWR_ACT ((0x0) << FShft(LMPWR_MC_PWR_CNT)) /* Active */
+#define LMPWR_MC_PWR_SRM ((0x1) << FShft(LMPWR_MC_PWR_CNT)) /* Self-refresh */
+#define LMPWR_MC_PWR_DPD ((0x3) << FShft(LMPWR_MC_PWR_CNT)) /* deep power down */
+
+/* LMPWRSTAT - Local Memory (SDRAM) Power Status Register */
+#define LMPWRSTAT_MC_PWR_CNT Fld(2,0)
+#define LMPWRSTAT_MC_PWR_ACT ((0x0) << FShft(LMPWRSTAT_MC_PWR_CNT)) /* Active */
+#define LMPWRSTAT_MC_PWR_SRM ((0x1) << FShft(LMPWRSTAT_MC_PWR_CNT)) /* Self-refresh */
+#define LMPWRSTAT_MC_PWR_DPD ((0x3) << FShft(LMPWRSTAT_MC_PWR_CNT)) /* deep power down */
+
+/* LMTYPE - Local Memory (SDRAM) Type Register */
+#define LMTYPE_CASLAT Fld(3,10)
+#define LMTYPE_CASLAT_1 ((0x1) << FShft(LMTYPE_CASLAT))
+#define LMTYPE_CASLAT_2 ((0x2) << FShft(LMTYPE_CASLAT))
+#define LMTYPE_CASLAT_3 ((0x3) << FShft(LMTYPE_CASLAT))
+#define LMTYPE_BKSZ Fld(2,8)
+#define LMTYPE_BKSZ_1 ((0x1) << FShft(LMTYPE_BKSZ))
+#define LMTYPE_BKSZ_2 ((0x2) << FShft(LMTYPE_BKSZ))
+#define LMTYPE_ROWSZ Fld(4,4)
+#define LMTYPE_ROWSZ_11 ((0xb) << FShft(LMTYPE_ROWSZ))
+#define LMTYPE_ROWSZ_12 ((0xc) << FShft(LMTYPE_ROWSZ))
+#define LMTYPE_ROWSZ_13 ((0xd) << FShft(LMTYPE_ROWSZ))
+#define LMTYPE_COLSZ Fld(4,0)
+#define LMTYPE_COLSZ_7 ((0x7) << FShft(LMTYPE_COLSZ))
+#define LMTYPE_COLSZ_8 ((0x8) << FShft(LMTYPE_COLSZ))
+#define LMTYPE_COLSZ_9 ((0x9) << FShft(LMTYPE_COLSZ))
+#define LMTYPE_COLSZ_10 ((0xa) << FShft(LMTYPE_COLSZ))
+#define LMTYPE_COLSZ_11 ((0xb) << FShft(LMTYPE_COLSZ))
+#define LMTYPE_COLSZ_12 ((0xc) << FShft(LMTYPE_COLSZ))
+
+/* LMTIM - Local Memory (SDRAM) Timing Register */
+#define LMTIM_TRAS Fld(4,16)
+#define Lmtim_Tras(x) ((x) << FShft(LMTIM_TRAS))
+#define LMTIM_TRP Fld(4,12)
+#define Lmtim_Trp(x) ((x) << FShft(LMTIM_TRP))
+#define LMTIM_TRCD Fld(4,8)
+#define Lmtim_Trcd(x) ((x) << FShft(LMTIM_TRCD))
+#define LMTIM_TRC Fld(4,4)
+#define Lmtim_Trc(x) ((x) << FShft(LMTIM_TRC))
+#define LMTIM_TDPL Fld(4,0)
+#define Lmtim_Tdpl(x) ((x) << FShft(LMTIM_TDPL))
+
+/* LMREFRESH - Local Memory (SDRAM) tREF Control Register */
+#define LMREFRESH_TREF Fld(2,0)
+#define Lmrefresh_Tref(x) ((x) << FShft(LMREFRESH_TREF))
+
+/* GSCTRL - Graphics surface control register */
+#define GSCTRL_LUT_EN (1 << 31)
+#define GSCTRL_GPIXFMT Fld(4,27)
+#define GSCTRL_GPIXFMT_INDEXED ((0x0) << FShft(GSCTRL_GPIXFMT))
+#define GSCTRL_GPIXFMT_ARGB4444 ((0x4) << FShft(GSCTRL_GPIXFMT))
+#define GSCTRL_GPIXFMT_ARGB1555 ((0x5) << FShft(GSCTRL_GPIXFMT))
+#define GSCTRL_GPIXFMT_RGB888 ((0x6) << FShft(GSCTRL_GPIXFMT))
+#define GSCTRL_GPIXFMT_RGB565 ((0x7) << FShft(GSCTRL_GPIXFMT))
+#define GSCTRL_GPIXFMT_ARGB8888 ((0x8) << FShft(GSCTRL_GPIXFMT))
+#define GSCTRL_GAMMA_EN (1 << 26)
+
+#define GSCTRL_GSWIDTH Fld(11,11)
+#define Gsctrl_Width(Pixel) /* Display Width [1..2048 pix.] */ \
+ (((Pixel) - 1) << FShft(GSCTRL_GSWIDTH))
+
+#define GSCTRL_GSHEIGHT Fld(11,0)
+#define Gsctrl_Height(Pixel) /* Display Height [1..2048 pix.] */ \
+ (((Pixel) - 1) << FShft(GSCTRL_GSHEIGHT))
+
+/* GBBASE fileds */
+#define GBBASE_GLALPHA Fld(8,24)
+#define Gbbase_Glalpha(x) ((x) << FShft(GBBASE_GLALPHA))
+
+#define GBBASE_COLKEY Fld(24,0)
+#define Gbbase_Colkey(x) ((x) << FShft(GBBASE_COLKEY))
+
+/* GDRCTRL fields */
+#define GDRCTRL_PIXDBL (1 << 31)
+#define GDRCTRL_PIXHLV (1 << 30)
+#define GDRCTRL_LNDBL (1 << 29)
+#define GDRCTRL_LNHLV (1 << 28)
+#define GDRCTRL_COLKEYM Fld(24,0)
+#define Gdrctrl_Colkeym(x) ((x) << FShft(GDRCTRL_COLKEYM))
+
+/* GSCADR graphics stream control address register fields */
+#define GSCADR_STR_EN (1 << 31)
+#define GSCADR_COLKEY_EN (1 << 30)
+#define GSCADR_COLKEYSCR (1 << 29)
+#define GSCADR_BLEND_M Fld(2,27)
+#define GSCADR_BLEND_NONE ((0x0) << FShft(GSCADR_BLEND_M))
+#define GSCADR_BLEND_INV ((0x1) << FShft(GSCADR_BLEND_M))
+#define GSCADR_BLEND_GLOB ((0x2) << FShft(GSCADR_BLEND_M))
+#define GSCADR_BLEND_PIX ((0x3) << FShft(GSCADR_BLEND_M))
+#define GSCADR_BLEND_POS Fld(2,24)
+#define GSCADR_BLEND_GFX ((0x0) << FShft(GSCADR_BLEND_POS))
+#define GSCADR_BLEND_VID ((0x1) << FShft(GSCADR_BLEND_POS))
+#define GSCADR_BLEND_CUR ((0x2) << FShft(GSCADR_BLEND_POS))
+#define GSCADR_GBASE_ADR Fld(23,0)
+#define Gscadr_Gbase_Adr(x) ((x) << FShft(GSCADR_GBASE_ADR))
+
+/* GSADR graphics stride address register fields */
+#define GSADR_SRCSTRIDE Fld(10,22)
+#define Gsadr_Srcstride(x) ((x) << FShft(GSADR_SRCSTRIDE))
+#define GSADR_XSTART Fld(11,11)
+#define Gsadr_Xstart(x) ((x) << FShft(GSADR_XSTART))
+#define GSADR_YSTART Fld(11,0)
+#define Gsadr_Ystart(y) ((y) << FShft(GSADR_YSTART))
+
+/* GPLUT graphics palette register fields */
+#define GPLUT_LUTADR Fld(8,24)
+#define Gplut_Lutadr(x) ((x) << FShft(GPLUT_LUTADR))
+#define GPLUT_LUTDATA Fld(24,0)
+#define Gplut_Lutdata(x) ((x) << FShft(GPLUT_LUTDATA))
+
+/* HCCTRL - Hardware Cursor Register fields */
+#define HCCTRL_CUR_EN (1 << 31)
+#define HCCTRL_COLKEY_EN (1 << 29)
+#define HCCTRL_COLKEYSRC (1 << 28)
+#define HCCTRL_BLEND_M Fld(2,26)
+#define HCCTRL_BLEND_NONE ((0x0) << FShft(HCCTRL_BLEND_M))
+#define HCCTRL_BLEND_INV ((0x1) << FShft(HCCTRL_BLEND_M))
+#define HCCTRL_BLEND_GLOB ((0x2) << FShft(HCCTRL_BLEND_M))
+#define HCCTRL_BLEND_PIX ((0x3) << FShft(HCCTRL_BLEND_M))
+#define HCCTRL_CPIXFMT Fld(3,23)
+#define HCCTRL_CPIXFMT_RGB332 ((0x3) << FShft(HCCTRL_CPIXFMT))
+#define HCCTRL_CPIXFMT_ARGB4444 ((0x4) << FShft(HCCTRL_CPIXFMT))
+#define HCCTRL_CPIXFMT_ARGB1555 ((0x5) << FShft(HCCTRL_CPIXFMT))
+#define HCCTRL_CBASE_ADR Fld(23,0)
+#define Hcctrl_Cbase_Adr(x) ((x) << FShft(HCCTRL_CBASE_ADR))
+
+/* HCSIZE Hardware Cursor Size Register fields */
+#define HCSIZE_BLEND_POS Fld(2,29)
+#define HCSIZE_BLEND_GFX ((0x0) << FShft(HCSIZE_BLEND_POS))
+#define HCSIZE_BLEND_VID ((0x1) << FShft(HCSIZE_BLEND_POS))
+#define HCSIZE_BLEND_CUR ((0x2) << FShft(HCSIZE_BLEND_POS))
+#define HCSIZE_CWIDTH Fld(3,16)
+#define Hcsize_Cwidth(x) ((x) << FShft(HCSIZE_CWIDTH))
+#define HCSIZE_CHEIGHT Fld(3,0)
+#define Hcsize_Cheight(x) ((x) << FShft(HCSIZE_CHEIGHT))
+
+/* HCPOS Hardware Cursor Position Register fields */
+#define HCPOS_SWITCHSRC (1 << 30)
+#define HCPOS_CURBLINK Fld(6,24)
+#define Hcpos_Curblink(x) ((x) << FShft(HCPOS_CURBLINK))
+#define HCPOS_XSTART Fld(12,12)
+#define Hcpos_Xstart(x) ((x) << FShft(HCPOS_XSTART))
+#define HCPOS_YSTART Fld(12,0)
+#define Hcpos_Ystart(y) ((y) << FShft(HCPOS_YSTART))
+
+/* HCBADR Hardware Cursor Blend Address Register */
+#define HCBADR_GLALPHA Fld(8,24)
+#define Hcbadr_Glalpha(x) ((x) << FShft(HCBADR_GLALPHA))
+#define HCBADR_COLKEY Fld(24,0)
+#define Hcbadr_Colkey(x) ((x) << FShft(HCBADR_COLKEY))
+
+/* HCCKMSK - Hardware Cursor Color Key Mask Register */
+#define HCCKMSK_COLKEY_M Fld(24,0)
+#define Hcckmsk_Colkey_M(x) ((x) << FShft(HCCKMSK_COLKEY_M))
+
+/* DSCTRL - Display sync control register */
+#define DSCTRL_SYNCGEN_EN (1 << 31)
+#define DSCTRL_DPL_RST (1 << 29)
+#define DSCTRL_PWRDN_M (1 << 28)
+#define DSCTRL_UPDSYNCCNT (1 << 26)
+#define DSCTRL_UPDINTCNT (1 << 25)
+#define DSCTRL_UPDCNT (1 << 24)
+#define DSCTRL_UPDWAIT Fld(4,16)
+#define Dsctrl_Updwait(x) ((x) << FShft(DSCTRL_UPDWAIT))
+#define DSCTRL_CLKPOL (1 << 11)
+#define DSCTRL_CSYNC_EN (1 << 10)
+#define DSCTRL_VS_SLAVE (1 << 7)
+#define DSCTRL_HS_SLAVE (1 << 6)
+#define DSCTRL_BLNK_POL (1 << 5)
+#define DSCTRL_BLNK_DIS (1 << 4)
+#define DSCTRL_VS_POL (1 << 3)
+#define DSCTRL_VS_DIS (1 << 2)
+#define DSCTRL_HS_POL (1 << 1)
+#define DSCTRL_HS_DIS (1 << 0)
+
+/* DHT01 - Display horizontal timing register 01 */
+#define DHT01_HBPS Fld(12,16)
+#define Dht01_Hbps(x) ((x) << FShft(DHT01_HBPS))
+#define DHT01_HT Fld(12,0)
+#define Dht01_Ht(x) ((x) << FShft(DHT01_HT))
+
+/* DHT02 - Display horizontal timing register 02 */
+#define DHT02_HAS Fld(12,16)
+#define Dht02_Has(x) ((x) << FShft(DHT02_HAS))
+#define DHT02_HLBS Fld(12,0)
+#define Dht02_Hlbs(x) ((x) << FShft(DHT02_HLBS))
+
+/* DHT03 - Display horizontal timing register 03 */
+#define DHT03_HFPS Fld(12,16)
+#define Dht03_Hfps(x) ((x) << FShft(DHT03_HFPS))
+#define DHT03_HRBS Fld(12,0)
+#define Dht03_Hrbs(x) ((x) << FShft(DHT03_HRBS))
+
+/* DVT01 - Display vertical timing register 01 */
+#define DVT01_VBPS Fld(12,16)
+#define Dvt01_Vbps(x) ((x) << FShft(DVT01_VBPS))
+#define DVT01_VT Fld(12,0)
+#define Dvt01_Vt(x) ((x) << FShft(DVT01_VT))
+
+/* DVT02 - Display vertical timing register 02 */
+#define DVT02_VAS Fld(12,16)
+#define Dvt02_Vas(x) ((x) << FShft(DVT02_VAS))
+#define DVT02_VTBS Fld(12,0)
+#define Dvt02_Vtbs(x) ((x) << FShft(DVT02_VTBS))
+
+/* DVT03 - Display vertical timing register 03 */
+#define DVT03_VFPS Fld(12,16)
+#define Dvt03_Vfps(x) ((x) << FShft(DVT03_VFPS))
+#define DVT03_VBBS Fld(12,0)
+#define Dvt03_Vbbs(x) ((x) << FShft(DVT03_VBBS))
+
+/* DVECTRL - display vertical event control register */
+#define DVECTRL_VEVENT Fld(12,16)
+#define Dvectrl_Vevent(x) ((x) << FShft(DVECTRL_VEVENT))
+#define DVECTRL_VFETCH Fld(12,0)
+#define Dvectrl_Vfetch(x) ((x) << FShft(DVECTRL_VFETCH))
+
+/* DHDET - display horizontal DE timing register */
+#define DHDET_HDES Fld(12,16)
+#define Dhdet_Hdes(x) ((x) << FShft(DHDET_HDES))
+#define DHDET_HDEF Fld(12,0)
+#define Dhdet_Hdef(x) ((x) << FShft(DHDET_HDEF))
+
+/* DVDET - display vertical DE timing register */
+#define DVDET_VDES Fld(12,16)
+#define Dvdet_Vdes(x) ((x) << FShft(DVDET_VDES))
+#define DVDET_VDEF Fld(12,0)
+#define Dvdet_Vdef(x) ((x) << FShft(DVDET_VDEF))
+
+/* DODMSK - display output data mask register */
+#define DODMSK_MASK_LVL (1 << 31)
+#define DODMSK_BLNK_LVL (1 << 30)
+#define DODMSK_MASK_B Fld(8,16)
+#define Dodmsk_Mask_B(x) ((x) << FShft(DODMSK_MASK_B))
+#define DODMSK_MASK_G Fld(8,8)
+#define Dodmsk_Mask_G(x) ((x) << FShft(DODMSK_MASK_G))
+#define DODMSK_MASK_R Fld(8,0)
+#define Dodmsk_Mask_R(x) ((x) << FShft(DODMSK_MASK_R))
+
+/* DBCOL - display border color control register */
+#define DBCOL_BORDCOL Fld(24,0)
+#define Dbcol_Bordcol(x) ((x) << FShft(DBCOL_BORDCOL))
+
+/* DVLNUM - display vertical line number register */
+#define DVLNUM_VLINE Fld(12,0)
+#define Dvlnum_Vline(x) ((x) << FShft(DVLNUM_VLINE))
+
+/* DMCTRL - Display Memory Control Register */
+#define DMCTRL_MEM_REF Fld(2,30)
+#define DMCTRL_MEM_REF_ACT ((0x0) << FShft(DMCTRL_MEM_REF))
+#define DMCTRL_MEM_REF_HB ((0x1) << FShft(DMCTRL_MEM_REF))
+#define DMCTRL_MEM_REF_VB ((0x2) << FShft(DMCTRL_MEM_REF))
+#define DMCTRL_MEM_REF_BOTH ((0x3) << FShft(DMCTRL_MEM_REF))
+#define DMCTRL_UV_THRHLD Fld(6,24)
+#define Dmctrl_Uv_Thrhld(x) ((x) << FShft(DMCTRL_UV_THRHLD))
+#define DMCTRL_V_THRHLD Fld(7,16)
+#define Dmctrl_V_Thrhld(x) ((x) << FShft(DMCTRL_V_THRHLD))
+#define DMCTRL_D_THRHLD Fld(7,8)
+#define Dmctrl_D_Thrhld(x) ((x) << FShft(DMCTRL_D_THRHLD))
+#define DMCTRL_BURSTLEN Fld(6,0)
+#define Dmctrl_Burstlen(x) ((x) << FShft(DMCTRL_BURSTLEN))
+
+
+/* DLSTS - display load status register */
+#define DLSTS_RLD_ADONE (1 << 23)
+/* #define DLSTS_RLD_ADOUT Fld(23,0) */
+
+/* DLLCTRL - display list load control register */
+#define DLLCTRL_RLD_ADRLN Fld(8,24)
+#define Dllctrl_Rld_Adrln(x) ((x) << FShft(DLLCTRL_RLD_ADRLN))
+
+/* SPOCTRL - Scale Pitch/Order Control Register */
+#define SPOCTRL_H_SC_BP (1 << 31)
+#define SPOCTRL_V_SC_BP (1 << 30)
+#define SPOCTRL_HV_SC_OR (1 << 29)
+#define SPOCTRL_VS_UR_C (1 << 27)
+#define SPOCTRL_VORDER Fld(2,16)
+#define SPOCTRL_VORDER_1TAP ((0x0) << FShft(SPOCTRL_VORDER))
+#define SPOCTRL_VORDER_2TAP ((0x1) << FShft(SPOCTRL_VORDER))
+#define SPOCTRL_VORDER_4TAP ((0x3) << FShft(SPOCTRL_VORDER))
+#define SPOCTRL_VPITCH Fld(16,0)
+#define Spoctrl_Vpitch(x) ((x) << FShft(SPOCTRL_VPITCH))
+
+#endif /* __REG_BITS_2700G_ */
--- /dev/null
+#ifndef __REGS_2700G_
+#define __REGS_2700G_
+
+/* extern unsigned long virt_base_2700; */
+/* #define __REG_2700G(x) (*(volatile unsigned long*)((x)+virt_base_2700)) */
+#define __REG_2700G(x) ((x)+virt_base_2700)
+
+/* System Configuration Registers (0x0000_0000 0x0000_0010) */
+#define SYSCFG __REG_2700G(0x00000000)
+#define PFBASE __REG_2700G(0x00000004)
+#define PFCEIL __REG_2700G(0x00000008)
+#define POLLFLAG __REG_2700G(0x0000000c)
+#define SYSRST __REG_2700G(0x00000010)
+
+/* Interrupt Control Registers (0x0000_0014 0x0000_002F) */
+#define NINTPW __REG_2700G(0x00000014)
+#define MINTENABLE __REG_2700G(0x00000018)
+#define MINTSTAT __REG_2700G(0x0000001c)
+#define SINTENABLE __REG_2700G(0x00000020)
+#define SINTSTAT __REG_2700G(0x00000024)
+#define SINTCLR __REG_2700G(0x00000028)
+
+/* Clock Control Registers (0x0000_002C 0x0000_005F) */
+#define SYSCLKSRC __REG_2700G(0x0000002c)
+#define PIXCLKSRC __REG_2700G(0x00000030)
+#define CLKSLEEP __REG_2700G(0x00000034)
+#define COREPLL __REG_2700G(0x00000038)
+#define DISPPLL __REG_2700G(0x0000003c)
+#define PLLSTAT __REG_2700G(0x00000040)
+#define VOVRCLK __REG_2700G(0x00000044)
+#define PIXCLK __REG_2700G(0x00000048)
+#define MEMCLK __REG_2700G(0x0000004c)
+#define M24CLK __REG_2700G(0x00000054)
+#define MBXCLK __REG_2700G(0x00000054)
+#define SDCLK __REG_2700G(0x00000058)
+#define PIXCLKDIV __REG_2700G(0x0000005c)
+
+/* LCD Port Control Register (0x0000_0060 0x0000_006F) */
+#define LCD_CONFIG __REG_2700G(0x00000060)
+
+/* On-Die Frame Buffer Registers (0x0000_0064 0x0000_006B) */
+#define ODFBPWR __REG_2700G(0x00000064)
+#define ODFBSTAT __REG_2700G(0x00000068)
+
+/* GPIO Registers (0x0000_006C 0x0000_007F) */
+#define GPIOCGF __REG_2700G(0x0000006c)
+#define GPIOHI __REG_2700G(0x00000070)
+#define GPIOLO __REG_2700G(0x00000074)
+#define GPIOSTAT __REG_2700G(0x00000078)
+
+/* Pulse Width Modulator (PWM) Registers (0x0000_0200 0x0000_02FF) */
+#define PWMRST __REG_2700G(0x00000200)
+#define PWMCFG __REG_2700G(0x00000204)
+#define PWM0DIV __REG_2700G(0x00000210)
+#define PWM0DUTY __REG_2700G(0x00000214)
+#define PWM0PER __REG_2700G(0x00000218)
+#define PWM1DIV __REG_2700G(0x00000220)
+#define PWM1DUTY __REG_2700G(0x00000224)
+#define PWM1PER __REG_2700G(0x00000228)
+
+/* Identification (ID) Registers (0x0000_0300 0x0000_0FFF) */
+#define ID __REG_2700G(0x00000FF0)
+
+/* Local Memory (SDRAM) Interface Registers (0x0000_1000 0x0000_1FFF) */
+#define LMRST __REG_2700G(0x00001000)
+#define LMCFG __REG_2700G(0x00001004)
+#define LMPWR __REG_2700G(0x00001008)
+#define LMPWRSTAT __REG_2700G(0x0000100c)
+#define LMCEMR __REG_2700G(0x00001010)
+#define LMTYPE __REG_2700G(0x00001014)
+#define LMTIM __REG_2700G(0x00001018)
+#define LMREFRESH __REG_2700G(0x0000101c)
+#define LMPROTMIN __REG_2700G(0x00001020)
+#define LMPROTMAX __REG_2700G(0x00001024)
+#define LMPROTCFG __REG_2700G(0x00001028)
+#define LMPROTERR __REG_2700G(0x0000102c)
+
+/* Plane Controller Registers (0x0000_2000 0x0000_2FFF) */
+#define GSCTRL __REG_2700G(0x00002000)
+#define VSCTRL __REG_2700G(0x00002004)
+#define GBBASE __REG_2700G(0x00002020)
+#define VBBASE __REG_2700G(0x00002024)
+#define GDRCTRL __REG_2700G(0x00002040)
+#define VCMSK __REG_2700G(0x00002044)
+#define GSCADR __REG_2700G(0x00002060)
+#define VSCADR __REG_2700G(0x00002064)
+#define VUBASE __REG_2700G(0x00002084)
+#define VVBASE __REG_2700G(0x000020a4)
+#define GSADR __REG_2700G(0x000020c0)
+#define VSADR __REG_2700G(0x000020c4)
+#define HCCTRL __REG_2700G(0x00002100)
+#define HCSIZE __REG_2700G(0x00002110)
+#define HCPOS __REG_2700G(0x00002120)
+#define HCBADR __REG_2700G(0x00002130)
+#define HCCKMSK __REG_2700G(0x00002140)
+#define GPLUT __REG_2700G(0x00002150)
+#define DSCTRL __REG_2700G(0x00002154)
+#define DHT01 __REG_2700G(0x00002158)
+#define DHT02 __REG_2700G(0x0000215c)
+#define DHT03 __REG_2700G(0x00002160)
+#define DVT01 __REG_2700G(0x00002164)
+#define DVT02 __REG_2700G(0x00002168)
+#define DVT03 __REG_2700G(0x0000216c)
+#define DBCOL __REG_2700G(0x00002170)
+#define BGCOLOR __REG_2700G(0x00002174)
+#define DINTRS __REG_2700G(0x00002178)
+#define DINTRE __REG_2700G(0x0000217c)
+#define DINTRCNT __REG_2700G(0x00002180)
+#define DSIG __REG_2700G(0x00002184)
+#define DMCTRL __REG_2700G(0x00002188)
+#define CLIPCTRL __REG_2700G(0x0000218c)
+#define SPOCTRL __REG_2700G(0x00002190)
+#define SVCTRL __REG_2700G(0x00002194)
+
+/* 0x0000_2198 */
+/* 0x0000_21A8 VSCOEFF[0:4] Video Scalar Vertical Coefficient [0:4] 4.14.5 */
+#define VSCOEFF0 __REG_2700G(0x00002198)
+#define VSCOEFF1 __REG_2700G(0x0000219c)
+#define VSCOEFF2 __REG_2700G(0x000021a0)
+#define VSCOEFF3 __REG_2700G(0x000021a4)
+#define VSCOEFF4 __REG_2700G(0x000021a8)
+
+#define SHCTRL __REG_2700G(0x000021b0)
+
+/* 0x0000_21B4 */
+/* 0x0000_21D4 HSCOEFF[0:8] Video Scalar Horizontal Coefficient [0:8] 4.14.7 */
+#define HSCOEFF0 __REG_2700G(0x000021b4)
+#define HSCOEFF1 __REG_2700G(0x000021b8)
+#define HSCOEFF2 __REG_2700G(0x000021bc)
+#define HSCOEFF3 __REG_2700G(0x000021b0)
+#define HSCOEFF4 __REG_2700G(0x000021c4)
+#define HSCOEFF5 __REG_2700G(0x000021c8)
+#define HSCOEFF6 __REG_2700G(0x000021cc)
+#define HSCOEFF7 __REG_2700G(0x000021d0)
+#define HSCOEFF8 __REG_2700G(0x000021d4)
+
+#define SSSIZE __REG_2700G(0x000021D8)
+
+/* 0x0000_2200 */
+/* 0x0000_2240 VIDGAM[0:16] Video Gamma LUT Index [0:16] 4.15.2 */
+#define VIDGAM0 __REG_2700G(0x00002200)
+#define VIDGAM1 __REG_2700G(0x00002204)
+#define VIDGAM2 __REG_2700G(0x00002208)
+#define VIDGAM3 __REG_2700G(0x0000220c)
+#define VIDGAM4 __REG_2700G(0x00002210)
+#define VIDGAM5 __REG_2700G(0x00002214)
+#define VIDGAM6 __REG_2700G(0x00002218)
+#define VIDGAM7 __REG_2700G(0x0000221c)
+#define VIDGAM8 __REG_2700G(0x00002220)
+#define VIDGAM9 __REG_2700G(0x00002224)
+#define VIDGAM10 __REG_2700G(0x00002228)
+#define VIDGAM11 __REG_2700G(0x0000222c)
+#define VIDGAM12 __REG_2700G(0x00002230)
+#define VIDGAM13 __REG_2700G(0x00002234)
+#define VIDGAM14 __REG_2700G(0x00002238)
+#define VIDGAM15 __REG_2700G(0x0000223c)
+#define VIDGAM16 __REG_2700G(0x00002240)
+
+/* 0x0000_2250 */
+/* 0x0000_2290 GFXGAM[0:16] Graphics Gamma LUT Index [0:16] 4.15.3 */
+#define GFXGAM0 __REG_2700G(0x00002250)
+#define GFXGAM1 __REG_2700G(0x00002254)
+#define GFXGAM2 __REG_2700G(0x00002258)
+#define GFXGAM3 __REG_2700G(0x0000225c)
+#define GFXGAM4 __REG_2700G(0x00002260)
+#define GFXGAM5 __REG_2700G(0x00002264)
+#define GFXGAM6 __REG_2700G(0x00002268)
+#define GFXGAM7 __REG_2700G(0x0000226c)
+#define GFXGAM8 __REG_2700G(0x00002270)
+#define GFXGAM9 __REG_2700G(0x00002274)
+#define GFXGAM10 __REG_2700G(0x00002278)
+#define GFXGAM11 __REG_2700G(0x0000227c)
+#define GFXGAM12 __REG_2700G(0x00002280)
+#define GFXGAM13 __REG_2700G(0x00002284)
+#define GFXGAM14 __REG_2700G(0x00002288)
+#define GFXGAM15 __REG_2700G(0x0000228c)
+#define GFXGAM16 __REG_2700G(0x00002290)
+
+#define DLSTS __REG_2700G(0x00002300)
+#define DLLCTRL __REG_2700G(0x00002304)
+#define DVLNUM __REG_2700G(0x00002308)
+#define DUCTRL __REG_2700G(0x0000230c)
+#define DVECTRL __REG_2700G(0x00002310)
+#define DHDET __REG_2700G(0x00002314)
+#define DVDET __REG_2700G(0x00002318)
+#define DODMSK __REG_2700G(0x0000231c)
+#define CSC01 __REG_2700G(0x00002330)
+#define CSC02 __REG_2700G(0x00002334)
+#define CSC03 __REG_2700G(0x00002338)
+#define CSC04 __REG_2700G(0x0000233c)
+#define CSC05 __REG_2700G(0x00002340)
+
+#define FB_MEMORY_START __REG_2700G(0x00060000)
+
+#endif /* __REGS_2700G_ */
*/
#include <linux/module.h>
-#include <linux/tty.h>
#include <linux/fb.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
*/
#define MIN_LEVEL 0x158
#define MAX_LEVEL 0x534
+#define LEVEL_STEP ((MAX_LEVEL - MIN_LEVEL) / FB_BACKLIGHT_MAX)
static struct backlight_properties nvidia_bl_data;
+/* Call with fb_info->bl_mutex held */
static int nvidia_bl_get_level_brightness(struct nvidia_par *par,
int level)
{
int nlevel;
/* Get and convert the value */
- mutex_lock(&info->bl_mutex);
- nlevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL;
- mutex_unlock(&info->bl_mutex);
+ nlevel = MIN_LEVEL + info->bl_curve[level] * LEVEL_STEP;
if (nlevel < 0)
nlevel = 0;
return nlevel;
}
-static int nvidia_bl_update_status(struct backlight_device *bd)
+/* Call with fb_info->bl_mutex held */
+static int __nvidia_bl_update_status(struct backlight_device *bd)
{
struct nvidia_par *par = class_get_devdata(&bd->class_dev);
u32 tmp_pcrt, tmp_pmc, fpcontrol;
return 0;
}
+static int nvidia_bl_update_status(struct backlight_device *bd)
+{
+ struct nvidia_par *par = class_get_devdata(&bd->class_dev);
+ struct fb_info *info = pci_get_drvdata(par->pci_dev);
+ int ret;
+
+ mutex_lock(&info->bl_mutex);
+ ret = __nvidia_bl_update_status(bd);
+ mutex_unlock(&info->bl_mutex);
+
+ return ret;
+}
+
static int nvidia_bl_get_brightness(struct backlight_device *bd)
{
return bd->props->brightness;
.max_brightness = (FB_BACKLIGHT_LEVELS - 1),
};
+void nvidia_bl_set_power(struct fb_info *info, int power)
+{
+ mutex_lock(&info->bl_mutex);
+ up(&info->bl_dev->sem);
+ info->bl_dev->props->power = power;
+ __nvidia_bl_update_status(info->bl_dev);
+ down(&info->bl_dev->sem);
+ mutex_unlock(&info->bl_mutex);
+}
+
void nvidia_bl_init(struct nvidia_par *par)
{
struct fb_info *info = pci_get_drvdata(par->pci_dev);
#ifdef CONFIG_FB_NVIDIA_BACKLIGHT
extern void nvidia_bl_init(struct nvidia_par *par);
extern void nvidia_bl_exit(struct nvidia_par *par);
+extern void nvidia_bl_set_power(struct fb_info *info, int power);
#else
static inline void nvidia_bl_init(struct nvidia_par *par) {}
static inline void nvidia_bl_exit(struct nvidia_par *par) {}
+static inline void nvidia_bl_set_power(struct fb_info *info, int power) {}
#endif
#endif /* __NV_PROTO_H__ */
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
NVWriteSeq(par, 0x01, tmp);
NVWriteCrtc(par, 0x1a, vesa);
-#ifdef CONFIG_FB_NVIDIA_BACKLIGHT
- mutex_lock(&info->bl_mutex);
- if (info->bl_dev) {
- down(&info->bl_dev->sem);
- info->bl_dev->props->power = blank;
- info->bl_dev->props->update_status(info->bl_dev);
- up(&info->bl_dev->sem);
- }
- mutex_unlock(&info->bl_mutex);
-#endif
+ nvidia_bl_set_power(info, blank);
NVTRACE_LEAVE();
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
*/
#define MIN_LEVEL 0x158
#define MAX_LEVEL 0x534
+#define LEVEL_STEP ((MAX_LEVEL - MIN_LEVEL) / FB_BACKLIGHT_MAX)
static struct backlight_properties riva_bl_data;
+/* Call with fb_info->bl_mutex held */
static int riva_bl_get_level_brightness(struct riva_par *par,
int level)
{
int nlevel;
/* Get and convert the value */
- mutex_lock(&info->bl_mutex);
- nlevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL;
- mutex_unlock(&info->bl_mutex);
+ nlevel = MIN_LEVEL + info->bl_curve[level] * LEVEL_STEP;
if (nlevel < 0)
nlevel = 0;
return nlevel;
}
-static int riva_bl_update_status(struct backlight_device *bd)
+/* Call with fb_info->bl_mutex held */
+static int __riva_bl_update_status(struct backlight_device *bd)
{
struct riva_par *par = class_get_devdata(&bd->class_dev);
U032 tmp_pcrt, tmp_pmc;
return 0;
}
+static int riva_bl_update_status(struct backlight_device *bd)
+{
+ struct riva_par *par = class_get_devdata(&bd->class_dev);
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+ int ret;
+
+ mutex_lock(&info->bl_mutex);
+ ret = __riva_bl_update_status(bd);
+ mutex_unlock(&info->bl_mutex);
+
+ return ret;
+}
+
static int riva_bl_get_brightness(struct backlight_device *bd)
{
return bd->props->brightness;
.max_brightness = (FB_BACKLIGHT_LEVELS - 1),
};
+static void riva_bl_set_power(struct fb_info *info, int power)
+{
+ mutex_lock(&info->bl_mutex);
+ up(&info->bl_dev->sem);
+ info->bl_dev->props->power = power;
+ __riva_bl_update_status(info->bl_dev);
+ down(&info->bl_dev->sem);
+ mutex_unlock(&info->bl_mutex);
+}
+
static void riva_bl_init(struct riva_par *par)
{
struct fb_info *info = pci_get_drvdata(par->pdev);
#else
static inline void riva_bl_init(struct riva_par *par) {}
static inline void riva_bl_exit(struct riva_par *par) {}
+static inline void riva_bl_set_power(struct fb_info *info, int power) {}
#endif /* CONFIG_FB_RIVA_BACKLIGHT */
/* ------------------------------------------------------------------------- *
SEQout(par, 0x01, tmp);
CRTCout(par, 0x1a, vesa);
-#ifdef CONFIG_FB_RIVA_BACKLIGHT
- mutex_lock(&info->bl_mutex);
- if (info->bl_dev) {
- down(&info->bl_dev->sem);
- info->bl_dev->props->power = blank;
- info->bl_dev->props->update_status(info->bl_dev);
- up(&info->bl_dev->sem);
- }
- mutex_unlock(&info->bl_mutex);
-#endif
+ riva_bl_set_power(info, blank);
NVTRACE_LEAVE();
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17)
#include <linux/tty.h>
+#else
+#include <linux/screen_info.h>
+#endif
+
#include <linux/slab.h>
#include <linux/fb.h>
#include <linux/selection.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
-#include <linux/tty.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/screen_info.h>
#include <video/vga.h>
#include <asm/io.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/screen_info.h>
#include <asm/io.h>
#include <video/vga.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/zorro.h>
do {
temp = i2c_smbus_read_byte(&pdev->client);
} while ((temp >= 0) && (temp & DS2482_REG_STS_1WB) &&
- (++retries > DS2482_WAIT_IDLE_TIMEOUT));
+ (++retries < DS2482_WAIT_IDLE_TIMEOUT));
}
if (retries > DS2482_WAIT_IDLE_TIMEOUT)
+++ /dev/null
-/*
- * w1_io.h
- *
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __W1_IO_H
-#define __W1_IO_H
-
-#include "w1.h"
-
-u8 w1_triplet(struct w1_master *dev, int bdir);
-void w1_write_8(struct w1_master *, u8);
-int w1_reset_bus(struct w1_master *);
-u8 w1_calc_crc8(u8 *, int);
-void w1_write_block(struct w1_master *, const u8 *, int);
-u8 w1_read_block(struct w1_master *, u8 *, int);
-void w1_search_devices(struct w1_master *dev, w1_slave_found_callback cb);
-int w1_reset_select_slave(struct w1_slave *sl);
-
-#endif /* __W1_IO_H */
config CIFS_DEBUG2
bool "Enable additional CIFS debugging routines"
+ depends on CIFS
help
Enabling this option adds a few more debugging routines
to the cifs code which slightly increases the size of
return 1;
}
-#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
-
/* An ELF note in memory */
struct memelfnote
{
/* binfmt_elf_fdpic.c: FDPIC ELF binary format
*
- * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved.
+ * Copyright (C) 2003, 2004, 2006 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
* Derived from binfmt_elf.c
*
#include <linux/file.h>
#include <linux/fcntl.h>
#include <linux/slab.h>
+#include <linux/pagemap.h>
#include <linux/highmem.h>
+#include <linux/highuid.h>
#include <linux/personality.h>
#include <linux/ptrace.h>
#include <linux/init.h>
#define kdebug(fmt, ...) do {} while(0)
#endif
+#if 0
+#define kdcore(fmt, ...) printk("FDPIC "fmt"\n" ,##__VA_ARGS__ )
+#else
+#define kdcore(fmt, ...) do {} while(0)
+#endif
+
MODULE_LICENSE("GPL");
-static int load_elf_fdpic_binary(struct linux_binprm *bprm, struct pt_regs *regs);
-//static int load_elf_fdpic_library(struct file *);
-static int elf_fdpic_fetch_phdrs(struct elf_fdpic_params *params, struct file *file);
-static int elf_fdpic_map_file(struct elf_fdpic_params *params,
- struct file *file,
- struct mm_struct *mm,
- const char *what);
+static int load_elf_fdpic_binary(struct linux_binprm *, struct pt_regs *);
+static int elf_fdpic_fetch_phdrs(struct elf_fdpic_params *, struct file *);
+static int elf_fdpic_map_file(struct elf_fdpic_params *, struct file *,
+ struct mm_struct *, const char *);
-static int create_elf_fdpic_tables(struct linux_binprm *bprm,
- struct mm_struct *mm,
- struct elf_fdpic_params *exec_params,
- struct elf_fdpic_params *interp_params);
+static int create_elf_fdpic_tables(struct linux_binprm *, struct mm_struct *,
+ struct elf_fdpic_params *,
+ struct elf_fdpic_params *);
#ifndef CONFIG_MMU
-static int elf_fdpic_transfer_args_to_stack(struct linux_binprm *bprm, unsigned long *_sp);
-static int elf_fdpic_map_file_constdisp_on_uclinux(struct elf_fdpic_params *params,
- struct file *file,
- struct mm_struct *mm);
+static int elf_fdpic_transfer_args_to_stack(struct linux_binprm *,
+ unsigned long *);
+static int elf_fdpic_map_file_constdisp_on_uclinux(struct elf_fdpic_params *,
+ struct file *,
+ struct mm_struct *);
#endif
-static int elf_fdpic_map_file_by_direct_mmap(struct elf_fdpic_params *params,
- struct file *file,
- struct mm_struct *mm);
+static int elf_fdpic_map_file_by_direct_mmap(struct elf_fdpic_params *,
+ struct file *, struct mm_struct *);
+
+#if defined(USE_ELF_CORE_DUMP) && defined(CONFIG_ELF_CORE)
+static int elf_fdpic_core_dump(long, struct pt_regs *, struct file *);
+#endif
static struct linux_binfmt elf_fdpic_format = {
.module = THIS_MODULE,
.load_binary = load_elf_fdpic_binary,
-// .load_shlib = load_elf_fdpic_library,
-// .core_dump = elf_fdpic_core_dump,
+#if defined(USE_ELF_CORE_DUMP) && defined(CONFIG_ELF_CORE)
+ .core_dump = elf_fdpic_core_dump,
+#endif
.min_coredump = ELF_EXEC_PAGESIZE,
};
-static int __init init_elf_fdpic_binfmt(void) { return register_binfmt(&elf_fdpic_format); }
-static void __exit exit_elf_fdpic_binfmt(void) { unregister_binfmt(&elf_fdpic_format); }
+static int __init init_elf_fdpic_binfmt(void)
+{
+ return register_binfmt(&elf_fdpic_format);
+}
+
+static void __exit exit_elf_fdpic_binfmt(void)
+{
+ unregister_binfmt(&elf_fdpic_format);
+}
-module_init(init_elf_fdpic_binfmt)
-module_exit(exit_elf_fdpic_binfmt)
+core_initcall(init_elf_fdpic_binfmt);
+module_exit(exit_elf_fdpic_binfmt);
static int is_elf_fdpic(struct elfhdr *hdr, struct file *file)
{
/*
* read the program headers table into memory
*/
-static int elf_fdpic_fetch_phdrs(struct elf_fdpic_params *params, struct file *file)
+static int elf_fdpic_fetch_phdrs(struct elf_fdpic_params *params,
+ struct file *file)
{
struct elf32_phdr *phdr;
unsigned long size;
if (!params->phdrs)
return -ENOMEM;
- retval = kernel_read(file, params->hdr.e_phoff, (char *) params->phdrs, size);
+ retval = kernel_read(file, params->hdr.e_phoff,
+ (char *) params->phdrs, size);
if (retval < 0)
return retval;
}
return 0;
-} /* end elf_fdpic_fetch_phdrs() */
+}
/*****************************************************************************/
/*
* load an fdpic binary into various bits of memory
*/
-static int load_elf_fdpic_binary(struct linux_binprm *bprm, struct pt_regs *regs)
+static int load_elf_fdpic_binary(struct linux_binprm *bprm,
+ struct pt_regs *regs)
{
struct elf_fdpic_params exec_params, interp_params;
struct elf_phdr *phdr;
- unsigned long stack_size;
+ unsigned long stack_size, entryaddr;
+#ifndef CONFIG_MMU
+ unsigned long fullsize;
+#endif
+#ifdef ELF_FDPIC_PLAT_INIT
+ unsigned long dynaddr;
+#endif
struct file *interpreter = NULL; /* to shut gcc up */
char *interpreter_name = NULL;
int executable_stack;
goto error;
}
- retval = kernel_read(interpreter, 0, bprm->buf, BINPRM_BUF_SIZE);
+ retval = kernel_read(interpreter, 0, bprm->buf,
+ BINPRM_BUF_SIZE);
if (retval < 0)
goto error;
¤t->mm->start_stack,
¤t->mm->start_brk);
- retval = setup_arg_pages(bprm, current->mm->start_stack, executable_stack);
+ retval = setup_arg_pages(bprm, current->mm->start_stack,
+ executable_stack);
if (retval < 0) {
send_sig(SIGKILL, current, 0);
goto error_kill;
#endif
/* load the executable and interpreter into memory */
- retval = elf_fdpic_map_file(&exec_params, bprm->file, current->mm, "executable");
+ retval = elf_fdpic_map_file(&exec_params, bprm->file, current->mm,
+ "executable");
if (retval < 0)
goto error_kill;
if (!current->mm->start_brk)
current->mm->start_brk = current->mm->end_data;
- current->mm->brk = current->mm->start_brk = PAGE_ALIGN(current->mm->start_brk);
+ current->mm->brk = current->mm->start_brk =
+ PAGE_ALIGN(current->mm->start_brk);
#else
/* create a stack and brk area big enough for everyone
stack_size = PAGE_SIZE * 2;
down_write(¤t->mm->mmap_sem);
- current->mm->start_brk = do_mmap(NULL,
- 0,
- stack_size,
+ current->mm->start_brk = do_mmap(NULL, 0, stack_size,
PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_PRIVATE | MAP_ANON | MAP_GROWSDOWN,
0);
- if (IS_ERR((void *) current->mm->start_brk)) {
+ if (IS_ERR_VALUE(current->mm->start_brk)) {
up_write(¤t->mm->mmap_sem);
retval = current->mm->start_brk;
current->mm->start_brk = 0;
goto error_kill;
}
- if (do_mremap(current->mm->start_brk,
- stack_size,
- ksize((char *) current->mm->start_brk),
- 0, 0
- ) == current->mm->start_brk
- )
- stack_size = ksize((char *) current->mm->start_brk);
+ /* expand the stack mapping to use up the entire allocation granule */
+ fullsize = ksize((char *) current->mm->start_brk);
+ if (!IS_ERR_VALUE(do_mremap(current->mm->start_brk, stack_size,
+ fullsize, 0, 0)))
+ stack_size = fullsize;
up_write(¤t->mm->mmap_sem);
current->mm->brk = current->mm->start_brk;
current->mm->context.end_brk = current->mm->start_brk;
- current->mm->context.end_brk += (stack_size > PAGE_SIZE) ? (stack_size - PAGE_SIZE) : 0;
+ current->mm->context.end_brk +=
+ (stack_size > PAGE_SIZE) ? (stack_size - PAGE_SIZE) : 0;
current->mm->start_stack = current->mm->start_brk + stack_size;
#endif
compute_creds(bprm);
current->flags &= ~PF_FORKNOEXEC;
- if (create_elf_fdpic_tables(bprm, current->mm, &exec_params, &interp_params) < 0)
+ if (create_elf_fdpic_tables(bprm, current->mm,
+ &exec_params, &interp_params) < 0)
goto error_kill;
- kdebug("- start_code %lx", (long) current->mm->start_code);
- kdebug("- end_code %lx", (long) current->mm->end_code);
- kdebug("- start_data %lx", (long) current->mm->start_data);
- kdebug("- end_data %lx", (long) current->mm->end_data);
- kdebug("- start_brk %lx", (long) current->mm->start_brk);
- kdebug("- brk %lx", (long) current->mm->brk);
- kdebug("- start_stack %lx", (long) current->mm->start_stack);
+ kdebug("- start_code %lx", current->mm->start_code);
+ kdebug("- end_code %lx", current->mm->end_code);
+ kdebug("- start_data %lx", current->mm->start_data);
+ kdebug("- end_data %lx", current->mm->end_data);
+ kdebug("- start_brk %lx", current->mm->start_brk);
+ kdebug("- brk %lx", current->mm->brk);
+ kdebug("- start_stack %lx", current->mm->start_stack);
#ifdef ELF_FDPIC_PLAT_INIT
/*
* example. This macro performs whatever initialization to
* the regs structure is required.
*/
- ELF_FDPIC_PLAT_INIT(regs,
- exec_params.map_addr,
- interp_params.map_addr,
- interp_params.dynamic_addr ?: exec_params.dynamic_addr
- );
+ dynaddr = interp_params.dynamic_addr ?: exec_params.dynamic_addr;
+ ELF_FDPIC_PLAT_INIT(regs, exec_params.map_addr, interp_params.map_addr,
+ dynaddr);
#endif
/* everything is now ready... get the userspace context ready to roll */
- start_thread(regs,
- interp_params.entry_addr ?: exec_params.entry_addr,
- current->mm->start_stack);
+ entryaddr = interp_params.entry_addr ?: exec_params.entry_addr;
+ start_thread(regs, entryaddr, current->mm->start_stack);
if (unlikely(current->ptrace & PT_PTRACED)) {
if (current->ptrace & PT_TRACE_EXEC)
- ptrace_notify ((PTRACE_EVENT_EXEC << 8) | SIGTRAP);
+ ptrace_notify((PTRACE_EVENT_EXEC << 8) | SIGTRAP);
else
send_sig(SIGTRAP, current, 0);
}
return retval;
/* unrecoverable error - kill the process */
- error_kill:
+error_kill:
send_sig(SIGSEGV, current, 0);
goto error;
-} /* end load_elf_fdpic_binary() */
+}
/*****************************************************************************/
/*
*/
hwcap = ELF_HWCAP;
k_platform = ELF_PLATFORM;
+ u_platform = NULL;
if (k_platform) {
platform_len = strlen(k_platform) + 1;
#if defined(__i386__) && defined(CONFIG_SMP)
/* in some cases (e.g. Hyper-Threading), we want to avoid L1 evictions
- * by the processes running on the same package. One thing we can do
- * is to shuffle the initial stack for them.
+ * by the processes running on the same package. One thing we can do is
+ * to shuffle the initial stack for them.
*
- * the conditionals here are unneeded, but kept in to make the
- * code behaviour the same as pre change unless we have hyperthreaded
+ * the conditionals here are unneeded, but kept in to make the code
+ * behaviour the same as pre change unless we have hyperthreaded
* processors. This keeps Mr Marcelo Person happier but should be
* removed for 2.5
*/
if (interp_params->loadmap) {
len = sizeof(struct elf32_fdpic_loadmap);
- len += sizeof(struct elf32_fdpic_loadseg) * interp_params->loadmap->nsegs;
+ len += sizeof(struct elf32_fdpic_loadseg) *
+ interp_params->loadmap->nsegs;
sp = (sp - len) & ~7UL;
interp_params->map_addr = sp;
- if (copy_to_user((void __user *) sp, interp_params->loadmap, len) != 0)
+ if (copy_to_user((void __user *) sp, interp_params->loadmap,
+ len) != 0)
return -EFAULT;
current->mm->context.interp_fdpic_loadmap = (unsigned long) sp;
sp -= sp & 15UL;
/* put the ELF interpreter info on the stack */
-#define NEW_AUX_ENT(nr, id, val) \
- do { \
- struct { unsigned long _id, _val; } __user *ent = (void __user *) csp; \
- __put_user((id), &ent[nr]._id); \
- __put_user((val), &ent[nr]._val); \
+#define NEW_AUX_ENT(nr, id, val) \
+ do { \
+ struct { unsigned long _id, _val; } __user *ent; \
+ \
+ ent = (void __user *) csp; \
+ __put_user((id), &ent[nr]._id); \
+ __put_user((val), &ent[nr]._val); \
} while (0)
csp -= 2 * sizeof(unsigned long);
NEW_AUX_ENT(0, AT_NULL, 0);
if (k_platform) {
csp -= 2 * sizeof(unsigned long);
- NEW_AUX_ENT(0, AT_PLATFORM, (elf_addr_t)(unsigned long) u_platform);
+ NEW_AUX_ENT(0, AT_PLATFORM,
+ (elf_addr_t) (unsigned long) u_platform);
}
csp -= DLINFO_ITEMS * 2 * sizeof(unsigned long);
- NEW_AUX_ENT( 0, AT_HWCAP, hwcap);
- NEW_AUX_ENT( 1, AT_PAGESZ, PAGE_SIZE);
- NEW_AUX_ENT( 2, AT_CLKTCK, CLOCKS_PER_SEC);
- NEW_AUX_ENT( 3, AT_PHDR, exec_params->ph_addr);
- NEW_AUX_ENT( 4, AT_PHENT, sizeof(struct elf_phdr));
- NEW_AUX_ENT( 5, AT_PHNUM, exec_params->hdr.e_phnum);
- NEW_AUX_ENT( 6, AT_BASE, interp_params->elfhdr_addr);
- NEW_AUX_ENT( 7, AT_FLAGS, 0);
- NEW_AUX_ENT( 8, AT_ENTRY, exec_params->entry_addr);
- NEW_AUX_ENT( 9, AT_UID, (elf_addr_t) current->uid);
- NEW_AUX_ENT(10, AT_EUID, (elf_addr_t) current->euid);
- NEW_AUX_ENT(11, AT_GID, (elf_addr_t) current->gid);
- NEW_AUX_ENT(12, AT_EGID, (elf_addr_t) current->egid);
+ NEW_AUX_ENT( 0, AT_HWCAP, hwcap);
+ NEW_AUX_ENT( 1, AT_PAGESZ, PAGE_SIZE);
+ NEW_AUX_ENT( 2, AT_CLKTCK, CLOCKS_PER_SEC);
+ NEW_AUX_ENT( 3, AT_PHDR, exec_params->ph_addr);
+ NEW_AUX_ENT( 4, AT_PHENT, sizeof(struct elf_phdr));
+ NEW_AUX_ENT( 5, AT_PHNUM, exec_params->hdr.e_phnum);
+ NEW_AUX_ENT( 6, AT_BASE, interp_params->elfhdr_addr);
+ NEW_AUX_ENT( 7, AT_FLAGS, 0);
+ NEW_AUX_ENT( 8, AT_ENTRY, exec_params->entry_addr);
+ NEW_AUX_ENT( 9, AT_UID, (elf_addr_t) current->uid);
+ NEW_AUX_ENT(10, AT_EUID, (elf_addr_t) current->euid);
+ NEW_AUX_ENT(11, AT_GID, (elf_addr_t) current->gid);
+ NEW_AUX_ENT(12, AT_EGID, (elf_addr_t) current->egid);
#ifdef ARCH_DLINFO
/* ARCH_DLINFO must come last so platform specific code can enforce
#ifdef CONFIG_MMU
current->mm->arg_start = bprm->p;
#else
- current->mm->arg_start = current->mm->start_stack - (MAX_ARG_PAGES * PAGE_SIZE - bprm->p);
+ current->mm->arg_start = current->mm->start_stack -
+ (MAX_ARG_PAGES * PAGE_SIZE - bprm->p);
#endif
p = (char __user *) current->mm->arg_start;
mm->start_stack = (unsigned long) sp;
return 0;
-} /* end create_elf_fdpic_tables() */
+}
/*****************************************************************************/
/*
* the stack
*/
#ifndef CONFIG_MMU
-static int elf_fdpic_transfer_args_to_stack(struct linux_binprm *bprm, unsigned long *_sp)
+static int elf_fdpic_transfer_args_to_stack(struct linux_binprm *bprm,
+ unsigned long *_sp)
{
unsigned long index, stop, sp;
char *src;
*_sp = (*_sp - (MAX_ARG_PAGES * PAGE_SIZE - bprm->p)) & ~15;
- out:
+out:
return ret;
-} /* end elf_fdpic_transfer_args_to_stack() */
+}
#endif
/*****************************************************************************/
seg = loadmap->segs;
for (loop = loadmap->nsegs; loop > 0; loop--, seg++) {
if (params->hdr.e_entry >= seg->p_vaddr &&
- params->hdr.e_entry < seg->p_vaddr + seg->p_memsz
- ) {
+ params->hdr.e_entry < seg->p_vaddr + seg->p_memsz) {
params->entry_addr =
- (params->hdr.e_entry - seg->p_vaddr) + seg->addr;
+ (params->hdr.e_entry - seg->p_vaddr) +
+ seg->addr;
break;
}
}
}
/* determine where the program header table has wound up if mapped */
- stop = params->hdr.e_phoff + params->hdr.e_phnum * sizeof (struct elf_phdr);
+ stop = params->hdr.e_phoff;
+ stop += params->hdr.e_phnum * sizeof (struct elf_phdr);
phdr = params->phdrs;
for (loop = 0; loop < params->hdr.e_phnum; loop++, phdr++) {
seg = loadmap->segs;
for (loop = loadmap->nsegs; loop > 0; loop--, seg++) {
if (phdr->p_vaddr >= seg->p_vaddr &&
- phdr->p_vaddr + phdr->p_filesz <= seg->p_vaddr + seg->p_memsz
- ) {
- params->ph_addr = (phdr->p_vaddr - seg->p_vaddr) + seg->addr +
+ phdr->p_vaddr + phdr->p_filesz <=
+ seg->p_vaddr + seg->p_memsz) {
+ params->ph_addr =
+ (phdr->p_vaddr - seg->p_vaddr) +
+ seg->addr +
params->hdr.e_phoff - phdr->p_offset;
break;
}
seg = loadmap->segs;
for (loop = loadmap->nsegs; loop > 0; loop--, seg++) {
if (phdr->p_vaddr >= seg->p_vaddr &&
- phdr->p_vaddr + phdr->p_memsz <= seg->p_vaddr + seg->p_memsz
- ) {
- params->dynamic_addr = (phdr->p_vaddr - seg->p_vaddr) + seg->addr;
-
- /* check the dynamic section contains at least one item, and that
- * the last item is a NULL entry */
+ phdr->p_vaddr + phdr->p_memsz <=
+ seg->p_vaddr + seg->p_memsz) {
+ params->dynamic_addr =
+ (phdr->p_vaddr - seg->p_vaddr) +
+ seg->addr;
+
+ /* check the dynamic section contains at least
+ * one item, and that the last item is a NULL
+ * entry */
if (phdr->p_memsz == 0 ||
phdr->p_memsz % sizeof(Elf32_Dyn) != 0)
goto dynamic_error;
tmp = phdr->p_memsz / sizeof(Elf32_Dyn);
- if (((Elf32_Dyn *) params->dynamic_addr)[tmp - 1].d_tag != 0)
+ if (((Elf32_Dyn *)
+ params->dynamic_addr)[tmp - 1].d_tag != 0)
goto dynamic_error;
break;
}
}
/* now elide adjacent segments in the load map on MMU linux
- * - on uClinux the holes between may actually be filled with system stuff or stuff from
- * other processes
+ * - on uClinux the holes between may actually be filled with system
+ * stuff or stuff from other processes
*/
#ifdef CONFIG_MMU
nloads = loadmap->nsegs;
if (seg->p_vaddr - mseg->p_vaddr == seg->addr - mseg->addr) {
load_addr = PAGE_ALIGN(mseg->addr + mseg->p_memsz);
if (load_addr == (seg->addr & PAGE_MASK)) {
- mseg->p_memsz += load_addr - (mseg->addr + mseg->p_memsz);
+ mseg->p_memsz +=
+ load_addr -
+ (mseg->addr + mseg->p_memsz);
mseg->p_memsz += seg->addr & ~PAGE_MASK;
mseg->p_memsz += seg->p_memsz;
loadmap->nsegs--;
return 0;
- dynamic_error:
+dynamic_error:
printk("ELF FDPIC %s with invalid DYNAMIC section (inode=%lu)\n",
what, file->f_dentry->d_inode->i_ino);
return -ELIBBAD;
-} /* end elf_fdpic_map_file() */
+}
/*****************************************************************************/
/*
* map a file with constant displacement under uClinux
*/
#ifndef CONFIG_MMU
-static int elf_fdpic_map_file_constdisp_on_uclinux(struct elf_fdpic_params *params,
- struct file *file,
- struct mm_struct *mm)
+static int elf_fdpic_map_file_constdisp_on_uclinux(
+ struct elf_fdpic_params *params,
+ struct file *file,
+ struct mm_struct *mm)
{
struct elf32_fdpic_loadseg *seg;
struct elf32_phdr *phdr;
load_addr = params->load_addr;
seg = params->loadmap->segs;
- /* determine the bounds of the contiguous overall allocation we must make */
+ /* determine the bounds of the contiguous overall allocation we must
+ * make */
phdr = params->phdrs;
for (loop = 0; loop < params->hdr.e_phnum; loop++, phdr++) {
if (params->phdrs[loop].p_type != PT_LOAD)
maddr = do_mmap(NULL, load_addr, top - base,
PROT_READ | PROT_WRITE | PROT_EXEC, mflags, 0);
up_write(&mm->mmap_sem);
- if (IS_ERR((void *) maddr))
+ if (IS_ERR_VALUE(maddr))
return (int) maddr;
if (load_addr != 0)
seg->p_vaddr = phdr->p_vaddr;
seg->p_memsz = phdr->p_memsz;
- ret = file->f_op->read(file, (void *) seg->addr, phdr->p_filesz, &fpos);
+ ret = file->f_op->read(file, (void *) seg->addr,
+ phdr->p_filesz, &fpos);
if (ret < 0)
return ret;
if (phdr->p_flags & PF_X) {
mm->start_code = seg->addr;
mm->end_code = seg->addr + phdr->p_memsz;
- }
- else if (!mm->start_data) {
+ } else if (!mm->start_data) {
mm->start_data = seg->addr;
#ifndef CONFIG_MMU
mm->end_data = seg->addr + phdr->p_memsz;
}
return 0;
-} /* end elf_fdpic_map_file_constdisp_on_uclinux() */
+}
#endif
/*****************************************************************************/
case ELF_FDPIC_FLAG_CONSTDISP:
/* constant displacement
- * - can be mapped anywhere, but must be mapped as a unit
+ * - can be mapped anywhere, but must be mapped as a
+ * unit
*/
if (!dvset) {
maddr = load_addr;
delta_vaddr = phdr->p_vaddr;
dvset = 1;
- }
- else {
+ } else {
maddr = load_addr + phdr->p_vaddr - delta_vaddr;
flags |= MAP_FIXED;
}
up_write(&mm->mmap_sem);
kdebug("mmap[%d] <file> sz=%lx pr=%x fl=%x of=%lx --> %08lx",
- loop, phdr->p_memsz + disp, prot, flags, phdr->p_offset - disp,
- maddr);
+ loop, phdr->p_memsz + disp, prot, flags,
+ phdr->p_offset - disp, maddr);
- if (IS_ERR((void *) maddr))
+ if (IS_ERR_VALUE(maddr))
return (int) maddr;
- if ((params->flags & ELF_FDPIC_FLAG_ARRANGEMENT) == ELF_FDPIC_FLAG_CONTIGUOUS)
+ if ((params->flags & ELF_FDPIC_FLAG_ARRANGEMENT) ==
+ ELF_FDPIC_FLAG_CONTIGUOUS)
load_addr += PAGE_ALIGN(phdr->p_memsz + disp);
seg->addr = maddr + disp;
if (phdr->p_offset == 0)
params->elfhdr_addr = seg->addr;
- /* clear the bit between beginning of mapping and beginning of PT_LOAD */
+ /* clear the bit between beginning of mapping and beginning of
+ * PT_LOAD */
if (prot & PROT_WRITE && disp > 0) {
kdebug("clear[%d] ad=%lx sz=%lx", loop, maddr, disp);
clear_user((void __user *) maddr, disp);
excess1 = PAGE_SIZE - ((maddr + phdr->p_filesz) & ~PAGE_MASK);
#ifdef CONFIG_MMU
-
if (excess > excess1) {
unsigned long xaddr = maddr + phdr->p_filesz + excess1;
unsigned long xmaddr;
flags |= MAP_FIXED | MAP_ANONYMOUS;
down_write(&mm->mmap_sem);
- xmaddr = do_mmap(NULL, xaddr, excess - excess1, prot, flags, 0);
+ xmaddr = do_mmap(NULL, xaddr, excess - excess1,
+ prot, flags, 0);
up_write(&mm->mmap_sem);
kdebug("mmap[%d] <anon>"
" ad=%lx sz=%lx pr=%x fl=%x of=0 --> %08lx",
- loop, xaddr, excess - excess1, prot, flags, xmaddr);
+ loop, xaddr, excess - excess1, prot, flags,
+ xmaddr);
if (xmaddr != xaddr)
return -ENOMEM;
if (prot & PROT_WRITE && excess1 > 0) {
kdebug("clear[%d] ad=%lx sz=%lx",
loop, maddr + phdr->p_filesz, excess1);
- clear_user((void __user *) maddr + phdr->p_filesz, excess1);
+ clear_user((void __user *) maddr + phdr->p_filesz,
+ excess1);
}
#else
if (phdr->p_flags & PF_X) {
mm->start_code = maddr;
mm->end_code = maddr + phdr->p_memsz;
- }
- else if (!mm->start_data) {
+ } else if (!mm->start_data) {
mm->start_data = maddr;
mm->end_data = maddr + phdr->p_memsz;
}
}
return 0;
-} /* end elf_fdpic_map_file_by_direct_mmap() */
+}
+
+/*****************************************************************************/
+/*
+ * ELF-FDPIC core dumper
+ *
+ * Modelled on fs/exec.c:aout_core_dump()
+ * Jeremy Fitzhardinge <jeremy@sw.oz.au>
+ *
+ * Modelled on fs/binfmt_elf.c core dumper
+ */
+#if defined(USE_ELF_CORE_DUMP) && defined(CONFIG_ELF_CORE)
+
+/*
+ * These are the only things you should do on a core-file: use only these
+ * functions to write out all the necessary info.
+ */
+static int dump_write(struct file *file, const void *addr, int nr)
+{
+ return file->f_op->write(file, addr, nr, &file->f_pos) == nr;
+}
+
+static int dump_seek(struct file *file, loff_t off)
+{
+ if (file->f_op->llseek) {
+ if (file->f_op->llseek(file, off, SEEK_SET) != off)
+ return 0;
+ } else {
+ file->f_pos = off;
+ }
+ return 1;
+}
+
+/*
+ * Decide whether a segment is worth dumping; default is yes to be
+ * sure (missing info is worse than too much; etc).
+ * Personally I'd include everything, and use the coredump limit...
+ *
+ * I think we should skip something. But I am not sure how. H.J.
+ */
+static int maydump(struct vm_area_struct *vma)
+{
+ /* Do not dump I/O mapped devices or special mappings */
+ if (vma->vm_flags & (VM_IO | VM_RESERVED)) {
+ kdcore("%08lx: %08lx: no (IO)", vma->vm_start, vma->vm_flags);
+ return 0;
+ }
+
+ /* If we may not read the contents, don't allow us to dump
+ * them either. "dump_write()" can't handle it anyway.
+ */
+ if (!(vma->vm_flags & VM_READ)) {
+ kdcore("%08lx: %08lx: no (!read)", vma->vm_start, vma->vm_flags);
+ return 0;
+ }
+
+ /* Dump shared memory only if mapped from an anonymous file. */
+ if (vma->vm_flags & VM_SHARED) {
+ if (vma->vm_file->f_dentry->d_inode->i_nlink == 0) {
+ kdcore("%08lx: %08lx: no (share)", vma->vm_start, vma->vm_flags);
+ return 1;
+ }
+
+ kdcore("%08lx: %08lx: no (share)", vma->vm_start, vma->vm_flags);
+ return 0;
+ }
+
+#ifdef CONFIG_MMU
+ /* If it hasn't been written to, don't write it out */
+ if (!vma->anon_vma) {
+ kdcore("%08lx: %08lx: no (!anon)", vma->vm_start, vma->vm_flags);
+ return 0;
+ }
+#endif
+
+ kdcore("%08lx: %08lx: yes", vma->vm_start, vma->vm_flags);
+ return 1;
+}
+
+/* An ELF note in memory */
+struct memelfnote
+{
+ const char *name;
+ int type;
+ unsigned int datasz;
+ void *data;
+};
+
+static int notesize(struct memelfnote *en)
+{
+ int sz;
+
+ sz = sizeof(struct elf_note);
+ sz += roundup(strlen(en->name) + 1, 4);
+ sz += roundup(en->datasz, 4);
+
+ return sz;
+}
+
+/* #define DEBUG */
+
+#define DUMP_WRITE(addr, nr) \
+ do { if (!dump_write(file, (addr), (nr))) return 0; } while(0)
+#define DUMP_SEEK(off) \
+ do { if (!dump_seek(file, (off))) return 0; } while(0)
+
+static int writenote(struct memelfnote *men, struct file *file)
+{
+ struct elf_note en;
+
+ en.n_namesz = strlen(men->name) + 1;
+ en.n_descsz = men->datasz;
+ en.n_type = men->type;
+
+ DUMP_WRITE(&en, sizeof(en));
+ DUMP_WRITE(men->name, en.n_namesz);
+ /* XXX - cast from long long to long to avoid need for libgcc.a */
+ DUMP_SEEK(roundup((unsigned long)file->f_pos, 4)); /* XXX */
+ DUMP_WRITE(men->data, men->datasz);
+ DUMP_SEEK(roundup((unsigned long)file->f_pos, 4)); /* XXX */
+
+ return 1;
+}
+#undef DUMP_WRITE
+#undef DUMP_SEEK
+
+#define DUMP_WRITE(addr, nr) \
+ if ((size += (nr)) > limit || !dump_write(file, (addr), (nr))) \
+ goto end_coredump;
+#define DUMP_SEEK(off) \
+ if (!dump_seek(file, (off))) \
+ goto end_coredump;
+
+static inline void fill_elf_fdpic_header(struct elfhdr *elf, int segs)
+{
+ memcpy(elf->e_ident, ELFMAG, SELFMAG);
+ elf->e_ident[EI_CLASS] = ELF_CLASS;
+ elf->e_ident[EI_DATA] = ELF_DATA;
+ elf->e_ident[EI_VERSION] = EV_CURRENT;
+ elf->e_ident[EI_OSABI] = ELF_OSABI;
+ memset(elf->e_ident+EI_PAD, 0, EI_NIDENT-EI_PAD);
+
+ elf->e_type = ET_CORE;
+ elf->e_machine = ELF_ARCH;
+ elf->e_version = EV_CURRENT;
+ elf->e_entry = 0;
+ elf->e_phoff = sizeof(struct elfhdr);
+ elf->e_shoff = 0;
+ elf->e_flags = ELF_FDPIC_CORE_EFLAGS;
+ elf->e_ehsize = sizeof(struct elfhdr);
+ elf->e_phentsize = sizeof(struct elf_phdr);
+ elf->e_phnum = segs;
+ elf->e_shentsize = 0;
+ elf->e_shnum = 0;
+ elf->e_shstrndx = 0;
+ return;
+}
+
+static inline void fill_elf_note_phdr(struct elf_phdr *phdr, int sz, loff_t offset)
+{
+ phdr->p_type = PT_NOTE;
+ phdr->p_offset = offset;
+ phdr->p_vaddr = 0;
+ phdr->p_paddr = 0;
+ phdr->p_filesz = sz;
+ phdr->p_memsz = 0;
+ phdr->p_flags = 0;
+ phdr->p_align = 0;
+ return;
+}
+
+static inline void fill_note(struct memelfnote *note, const char *name, int type,
+ unsigned int sz, void *data)
+{
+ note->name = name;
+ note->type = type;
+ note->datasz = sz;
+ note->data = data;
+ return;
+}
+
+/*
+ * fill up all the fields in prstatus from the given task struct, except
+ * registers which need to be filled up seperately.
+ */
+static void fill_prstatus(struct elf_prstatus *prstatus,
+ struct task_struct *p, long signr)
+{
+ prstatus->pr_info.si_signo = prstatus->pr_cursig = signr;
+ prstatus->pr_sigpend = p->pending.signal.sig[0];
+ prstatus->pr_sighold = p->blocked.sig[0];
+ prstatus->pr_pid = p->pid;
+ prstatus->pr_ppid = p->parent->pid;
+ prstatus->pr_pgrp = process_group(p);
+ prstatus->pr_sid = p->signal->session;
+ if (thread_group_leader(p)) {
+ /*
+ * This is the record for the group leader. Add in the
+ * cumulative times of previous dead threads. This total
+ * won't include the time of each live thread whose state
+ * is included in the core dump. The final total reported
+ * to our parent process when it calls wait4 will include
+ * those sums as well as the little bit more time it takes
+ * this and each other thread to finish dying after the
+ * core dump synchronization phase.
+ */
+ cputime_to_timeval(cputime_add(p->utime, p->signal->utime),
+ &prstatus->pr_utime);
+ cputime_to_timeval(cputime_add(p->stime, p->signal->stime),
+ &prstatus->pr_stime);
+ } else {
+ cputime_to_timeval(p->utime, &prstatus->pr_utime);
+ cputime_to_timeval(p->stime, &prstatus->pr_stime);
+ }
+ cputime_to_timeval(p->signal->cutime, &prstatus->pr_cutime);
+ cputime_to_timeval(p->signal->cstime, &prstatus->pr_cstime);
+
+ prstatus->pr_exec_fdpic_loadmap = p->mm->context.exec_fdpic_loadmap;
+ prstatus->pr_interp_fdpic_loadmap = p->mm->context.interp_fdpic_loadmap;
+}
+
+static int fill_psinfo(struct elf_prpsinfo *psinfo, struct task_struct *p,
+ struct mm_struct *mm)
+{
+ unsigned int i, len;
+
+ /* first copy the parameters from user space */
+ memset(psinfo, 0, sizeof(struct elf_prpsinfo));
+
+ len = mm->arg_end - mm->arg_start;
+ if (len >= ELF_PRARGSZ)
+ len = ELF_PRARGSZ - 1;
+ if (copy_from_user(&psinfo->pr_psargs,
+ (const char __user *) mm->arg_start, len))
+ return -EFAULT;
+ for (i = 0; i < len; i++)
+ if (psinfo->pr_psargs[i] == 0)
+ psinfo->pr_psargs[i] = ' ';
+ psinfo->pr_psargs[len] = 0;
+
+ psinfo->pr_pid = p->pid;
+ psinfo->pr_ppid = p->parent->pid;
+ psinfo->pr_pgrp = process_group(p);
+ psinfo->pr_sid = p->signal->session;
+
+ i = p->state ? ffz(~p->state) + 1 : 0;
+ psinfo->pr_state = i;
+ psinfo->pr_sname = (i > 5) ? '.' : "RSDTZW"[i];
+ psinfo->pr_zomb = psinfo->pr_sname == 'Z';
+ psinfo->pr_nice = task_nice(p);
+ psinfo->pr_flag = p->flags;
+ SET_UID(psinfo->pr_uid, p->uid);
+ SET_GID(psinfo->pr_gid, p->gid);
+ strncpy(psinfo->pr_fname, p->comm, sizeof(psinfo->pr_fname));
+
+ return 0;
+}
+
+/* Here is the structure in which status of each thread is captured. */
+struct elf_thread_status
+{
+ struct list_head list;
+ struct elf_prstatus prstatus; /* NT_PRSTATUS */
+ elf_fpregset_t fpu; /* NT_PRFPREG */
+ struct task_struct *thread;
+#ifdef ELF_CORE_COPY_XFPREGS
+ elf_fpxregset_t xfpu; /* NT_PRXFPREG */
+#endif
+ struct memelfnote notes[3];
+ int num_notes;
+};
+
+/*
+ * In order to add the specific thread information for the elf file format,
+ * we need to keep a linked list of every thread's pr_status and then create
+ * a single section for them in the final core file.
+ */
+static int elf_dump_thread_status(long signr, struct elf_thread_status *t)
+{
+ struct task_struct *p = t->thread;
+ int sz = 0;
+
+ t->num_notes = 0;
+
+ fill_prstatus(&t->prstatus, p, signr);
+ elf_core_copy_task_regs(p, &t->prstatus.pr_reg);
+
+ fill_note(&t->notes[0], "CORE", NT_PRSTATUS, sizeof(t->prstatus),
+ &t->prstatus);
+ t->num_notes++;
+ sz += notesize(&t->notes[0]);
+
+ t->prstatus.pr_fpvalid = elf_core_copy_task_fpregs(p, NULL, &t->fpu);
+ if (t->prstatus.pr_fpvalid) {
+ fill_note(&t->notes[1], "CORE", NT_PRFPREG, sizeof(t->fpu),
+ &t->fpu);
+ t->num_notes++;
+ sz += notesize(&t->notes[1]);
+ }
+
+#ifdef ELF_CORE_COPY_XFPREGS
+ if (elf_core_copy_task_xfpregs(p, &t->xfpu)) {
+ fill_note(&t->notes[2], "LINUX", NT_PRXFPREG, sizeof(t->xfpu),
+ &t->xfpu);
+ t->num_notes++;
+ sz += notesize(&t->notes[2]);
+ }
+#endif
+ return sz;
+}
+
+/*
+ * dump the segments for an MMU process
+ */
+#ifdef CONFIG_MMU
+static int elf_fdpic_dump_segments(struct file *file, struct mm_struct *mm,
+ size_t *size, unsigned long *limit)
+{
+ struct vm_area_struct *vma;
+
+ for (vma = current->mm->mmap; vma; vma = vma->vm_next) {
+ unsigned long addr;
+
+ if (!maydump(vma))
+ continue;
+
+ for (addr = vma->vm_start;
+ addr < vma->vm_end;
+ addr += PAGE_SIZE
+ ) {
+ struct vm_area_struct *vma;
+ struct page *page;
+
+ if (get_user_pages(current, current->mm, addr, 1, 0, 1,
+ &page, &vma) <= 0) {
+ DUMP_SEEK(file->f_pos + PAGE_SIZE);
+ }
+ else if (page == ZERO_PAGE(addr)) {
+ DUMP_SEEK(file->f_pos + PAGE_SIZE);
+ page_cache_release(page);
+ }
+ else {
+ void *kaddr;
+
+ flush_cache_page(vma, addr, page_to_pfn(page));
+ kaddr = kmap(page);
+ if ((*size += PAGE_SIZE) > *limit ||
+ !dump_write(file, kaddr, PAGE_SIZE)
+ ) {
+ kunmap(page);
+ page_cache_release(page);
+ return -EIO;
+ }
+ kunmap(page);
+ page_cache_release(page);
+ }
+ }
+ }
+
+ return 0;
+
+end_coredump:
+ return -EFBIG;
+}
+#endif
+
+/*
+ * dump the segments for a NOMMU process
+ */
+#ifndef CONFIG_MMU
+static int elf_fdpic_dump_segments(struct file *file, struct mm_struct *mm,
+ size_t *size, unsigned long *limit)
+{
+ struct vm_list_struct *vml;
+
+ for (vml = current->mm->context.vmlist; vml; vml = vml->next) {
+ struct vm_area_struct *vma = vml->vma;
+
+ if (!maydump(vma))
+ continue;
+
+ if ((*size += PAGE_SIZE) > *limit)
+ return -EFBIG;
+
+ if (!dump_write(file, (void *) vma->vm_start,
+ vma->vm_end - vma->vm_start))
+ return -EIO;
+ }
+
+ return 0;
+}
+#endif
+
+/*
+ * Actual dumper
+ *
+ * This is a two-pass process; first we find the offsets of the bits,
+ * and then they are actually written out. If we run out of core limit
+ * we just truncate.
+ */
+static int elf_fdpic_core_dump(long signr, struct pt_regs *regs,
+ struct file *file)
+{
+#define NUM_NOTES 6
+ int has_dumped = 0;
+ mm_segment_t fs;
+ int segs;
+ size_t size = 0;
+ int i;
+ struct vm_area_struct *vma;
+ struct elfhdr *elf = NULL;
+ loff_t offset = 0, dataoff;
+ unsigned long limit = current->signal->rlim[RLIMIT_CORE].rlim_cur;
+ int numnote;
+ struct memelfnote *notes = NULL;
+ struct elf_prstatus *prstatus = NULL; /* NT_PRSTATUS */
+ struct elf_prpsinfo *psinfo = NULL; /* NT_PRPSINFO */
+ struct task_struct *g, *p;
+ LIST_HEAD(thread_list);
+ struct list_head *t;
+ elf_fpregset_t *fpu = NULL;
+#ifdef ELF_CORE_COPY_XFPREGS
+ elf_fpxregset_t *xfpu = NULL;
+#endif
+ int thread_status_size = 0;
+#ifndef CONFIG_MMU
+ struct vm_list_struct *vml;
+#endif
+ elf_addr_t *auxv;
+
+ /*
+ * We no longer stop all VM operations.
+ *
+ * This is because those proceses that could possibly change map_count
+ * or the mmap / vma pages are now blocked in do_exit on current
+ * finishing this core dump.
+ *
+ * Only ptrace can touch these memory addresses, but it doesn't change
+ * the map_count or the pages allocated. So no possibility of crashing
+ * exists while dumping the mm->vm_next areas to the core file.
+ */
+
+ /* alloc memory for large data structures: too large to be on stack */
+ elf = kmalloc(sizeof(*elf), GFP_KERNEL);
+ if (!elf)
+ goto cleanup;
+ prstatus = kzalloc(sizeof(*prstatus), GFP_KERNEL);
+ if (!prstatus)
+ goto cleanup;
+ psinfo = kmalloc(sizeof(*psinfo), GFP_KERNEL);
+ if (!psinfo)
+ goto cleanup;
+ notes = kmalloc(NUM_NOTES * sizeof(struct memelfnote), GFP_KERNEL);
+ if (!notes)
+ goto cleanup;
+ fpu = kmalloc(sizeof(*fpu), GFP_KERNEL);
+ if (!fpu)
+ goto cleanup;
+#ifdef ELF_CORE_COPY_XFPREGS
+ xfpu = kmalloc(sizeof(*xfpu), GFP_KERNEL);
+ if (!xfpu)
+ goto cleanup;
+#endif
+
+ if (signr) {
+ struct elf_thread_status *tmp;
+ read_lock(&tasklist_lock);
+ do_each_thread(g,p)
+ if (current->mm == p->mm && current != p) {
+ tmp = kzalloc(sizeof(*tmp), GFP_ATOMIC);
+ if (!tmp) {
+ read_unlock(&tasklist_lock);
+ goto cleanup;
+ }
+ INIT_LIST_HEAD(&tmp->list);
+ tmp->thread = p;
+ list_add(&tmp->list, &thread_list);
+ }
+ while_each_thread(g,p);
+ read_unlock(&tasklist_lock);
+ list_for_each(t, &thread_list) {
+ struct elf_thread_status *tmp;
+ int sz;
+
+ tmp = list_entry(t, struct elf_thread_status, list);
+ sz = elf_dump_thread_status(signr, tmp);
+ thread_status_size += sz;
+ }
+ }
+
+ /* now collect the dump for the current */
+ fill_prstatus(prstatus, current, signr);
+ elf_core_copy_regs(&prstatus->pr_reg, regs);
+
+#ifdef CONFIG_MMU
+ segs = current->mm->map_count;
+#else
+ segs = 0;
+ for (vml = current->mm->context.vmlist; vml; vml = vml->next)
+ segs++;
+#endif
+#ifdef ELF_CORE_EXTRA_PHDRS
+ segs += ELF_CORE_EXTRA_PHDRS;
+#endif
+
+ /* Set up header */
+ fill_elf_fdpic_header(elf, segs + 1); /* including notes section */
+
+ has_dumped = 1;
+ current->flags |= PF_DUMPCORE;
+
+ /*
+ * Set up the notes in similar form to SVR4 core dumps made
+ * with info from their /proc.
+ */
+
+ fill_note(notes + 0, "CORE", NT_PRSTATUS, sizeof(*prstatus), prstatus);
+ fill_psinfo(psinfo, current->group_leader, current->mm);
+ fill_note(notes + 1, "CORE", NT_PRPSINFO, sizeof(*psinfo), psinfo);
+
+ numnote = 2;
+
+ auxv = (elf_addr_t *) current->mm->saved_auxv;
+
+ i = 0;
+ do
+ i += 2;
+ while (auxv[i - 2] != AT_NULL);
+ fill_note(¬es[numnote++], "CORE", NT_AUXV,
+ i * sizeof(elf_addr_t), auxv);
+
+ /* Try to dump the FPU. */
+ if ((prstatus->pr_fpvalid =
+ elf_core_copy_task_fpregs(current, regs, fpu)))
+ fill_note(notes + numnote++,
+ "CORE", NT_PRFPREG, sizeof(*fpu), fpu);
+#ifdef ELF_CORE_COPY_XFPREGS
+ if (elf_core_copy_task_xfpregs(current, xfpu))
+ fill_note(notes + numnote++,
+ "LINUX", NT_PRXFPREG, sizeof(*xfpu), xfpu);
+#endif
+
+ fs = get_fs();
+ set_fs(KERNEL_DS);
+
+ DUMP_WRITE(elf, sizeof(*elf));
+ offset += sizeof(*elf); /* Elf header */
+ offset += (segs+1) * sizeof(struct elf_phdr); /* Program headers */
+
+ /* Write notes phdr entry */
+ {
+ struct elf_phdr phdr;
+ int sz = 0;
+
+ for (i = 0; i < numnote; i++)
+ sz += notesize(notes + i);
+
+ sz += thread_status_size;
+
+ fill_elf_note_phdr(&phdr, sz, offset);
+ offset += sz;
+ DUMP_WRITE(&phdr, sizeof(phdr));
+ }
+
+ /* Page-align dumped data */
+ dataoff = offset = roundup(offset, ELF_EXEC_PAGESIZE);
+
+ /* write program headers for segments dump */
+ for (
+#ifdef CONFIG_MMU
+ vma = current->mm->mmap; vma; vma = vma->vm_next
+#else
+ vml = current->mm->context.vmlist; vml; vml = vml->next
+#endif
+ ) {
+ struct elf_phdr phdr;
+ size_t sz;
+
+#ifndef CONFIG_MMU
+ vma = vml->vma;
+#endif
+
+ sz = vma->vm_end - vma->vm_start;
+
+ phdr.p_type = PT_LOAD;
+ phdr.p_offset = offset;
+ phdr.p_vaddr = vma->vm_start;
+ phdr.p_paddr = 0;
+ phdr.p_filesz = maydump(vma) ? sz : 0;
+ phdr.p_memsz = sz;
+ offset += phdr.p_filesz;
+ phdr.p_flags = vma->vm_flags & VM_READ ? PF_R : 0;
+ if (vma->vm_flags & VM_WRITE)
+ phdr.p_flags |= PF_W;
+ if (vma->vm_flags & VM_EXEC)
+ phdr.p_flags |= PF_X;
+ phdr.p_align = ELF_EXEC_PAGESIZE;
+
+ DUMP_WRITE(&phdr, sizeof(phdr));
+ }
+
+#ifdef ELF_CORE_WRITE_EXTRA_PHDRS
+ ELF_CORE_WRITE_EXTRA_PHDRS;
+#endif
+
+ /* write out the notes section */
+ for (i = 0; i < numnote; i++)
+ if (!writenote(notes + i, file))
+ goto end_coredump;
+
+ /* write out the thread status notes section */
+ list_for_each(t, &thread_list) {
+ struct elf_thread_status *tmp =
+ list_entry(t, struct elf_thread_status, list);
+
+ for (i = 0; i < tmp->num_notes; i++)
+ if (!writenote(&tmp->notes[i], file))
+ goto end_coredump;
+ }
+
+ DUMP_SEEK(dataoff);
+
+ if (elf_fdpic_dump_segments(file, current->mm, &size, &limit) < 0)
+ goto end_coredump;
+
+#ifdef ELF_CORE_WRITE_EXTRA_DATA
+ ELF_CORE_WRITE_EXTRA_DATA;
+#endif
+
+ if (file->f_pos != offset) {
+ /* Sanity check */
+ printk(KERN_WARNING
+ "elf_core_dump: file->f_pos (%lld) != offset (%lld)\n",
+ file->f_pos, offset);
+ }
+
+end_coredump:
+ set_fs(fs);
+
+cleanup:
+ while (!list_empty(&thread_list)) {
+ struct list_head *tmp = thread_list.next;
+ list_del(tmp);
+ kfree(list_entry(tmp, struct elf_thread_status, list));
+ }
+
+ kfree(elf);
+ kfree(prstatus);
+ kfree(psinfo);
+ kfree(notes);
+ kfree(fpu);
+#ifdef ELF_CORE_COPY_XFPREGS
+ kfree(xfpu);
+#endif
+ return has_dumped;
+#undef NUM_NOTES
+}
+
+#endif /* USE_ELF_CORE_DUMP */
return 0;
}
+/**
+ * register_chrdev() - Register a major number for character devices.
+ * @major: major device number or 0 for dynamic allocation
+ * @name: name of this range of devices
+ * @fops: file operations associated with this devices
+ *
+ * If @major == 0 this functions will dynamically allocate a major and return
+ * its number.
+ *
+ * If @major > 0 this function will attempt to reserve a device with the given
+ * major number and will return zero on success.
+ *
+ * Returns a -ve errno on failure.
+ *
+ * The name of this device has nothing to do with the name of the device in
+ * /dev. It only helps to keep track of the different owners of devices. If
+ * your module name has only one type of devices it's ok to use e.g. the name
+ * of the module here.
+ *
+ * This function registers a range of 256 minor numbers. The first minor number
+ * is 0.
+ */
int register_chrdev(unsigned int major, const char *name,
const struct file_operations *fops)
{
extern int ext3_acl_chmod (struct inode *);
extern int ext3_init_acl (handle_t *, struct inode *, struct inode *);
-extern int init_ext3_acl(void);
-extern void exit_ext3_acl(void);
-
#else /* CONFIG_EXT3_FS_POSIX_ACL */
#include <linux/sched.h>
#define ext3_permission NULL
if (!fdt)
goto out;
- nfds = 8 * L1_CACHE_BYTES;
- /* Expand to the max in easy steps */
- while (nfds <= nr) {
- nfds = nfds * 2;
- if (nfds > NR_OPEN)
- nfds = NR_OPEN;
- }
+ nfds = max_t(int, 8 * L1_CACHE_BYTES, roundup_pow_of_two(nr + 1));
+ if (nfds > NR_OPEN)
+ nfds = NR_OPEN;
new_openset = alloc_fdset(nfds);
new_execset = alloc_fdset(nfds);
} while (nfds <= nr);
new_fds = alloc_fd_array(nfds);
if (!new_fds)
- goto out;
+ goto out2;
fdt->fd = new_fds;
fdt->max_fds = nfds;
fdt->free_files = NULL;
return fdt;
+out2:
+ nfds = fdt->max_fdset;
out:
if (new_openset)
free_fdset(new_openset, nfds);
ret = -ENOMEM;
len = vma_len + ((loff_t)vma->vm_pgoff << PAGE_SHIFT);
- if (!(vma->vm_flags & VM_WRITE) && len > inode->i_size)
- goto out;
if (vma->vm_flags & VM_MAYSHARE &&
hugetlb_reserve_pages(inode, vma->vm_pgoff >> (HPAGE_SHIFT-PAGE_SHIFT),
ret = 0;
hugetlb_prefault_arch_hook(vma->vm_mm);
- if (inode->i_size < len)
+ if (vma->vm_flags & VM_WRITE && inode->i_size < len)
inode->i_size = len;
out:
mutex_unlock(&inode->i_mutex);
* Inode is being freed
*/
list_del_init(&jfs_ip->anon_inode_list);
- } else if (! !mutex_trylock(&jfs_ip->commit_mutex)) {
+ } else if (mutex_trylock(&jfs_ip->commit_mutex)) {
/*
* inode will be removed from anonymous list
* when it is committed
out3:
txEnd(tid);
- mutex_unlock(&JFS_IP(dip)->commit_mutex);
mutex_unlock(&JFS_IP(ip)->commit_mutex);
+ mutex_unlock(&JFS_IP(dip)->commit_mutex);
if (rc) {
free_ea_wmap(ip);
ip->i_nlink = 0;
out3:
txEnd(tid);
- mutex_unlock(&JFS_IP(dip)->commit_mutex);
mutex_unlock(&JFS_IP(ip)->commit_mutex);
+ mutex_unlock(&JFS_IP(dip)->commit_mutex);
if (rc) {
free_ea_wmap(ip);
ip->i_nlink = 0;
if (rc == -EIO)
txAbort(tid, 1);
txEnd(tid);
- mutex_unlock(&JFS_IP(dip)->commit_mutex);
mutex_unlock(&JFS_IP(ip)->commit_mutex);
+ mutex_unlock(&JFS_IP(dip)->commit_mutex);
goto out2;
}
txEnd(tid);
- mutex_unlock(&JFS_IP(dip)->commit_mutex);
mutex_unlock(&JFS_IP(ip)->commit_mutex);
+ mutex_unlock(&JFS_IP(dip)->commit_mutex);
/*
* Truncating the directory index table is not guaranteed. It
if (rc == -EIO)
txAbort(tid, 1); /* Marks FS Dirty */
txEnd(tid);
- mutex_unlock(&JFS_IP(dip)->commit_mutex);
mutex_unlock(&JFS_IP(ip)->commit_mutex);
+ mutex_unlock(&JFS_IP(dip)->commit_mutex);
IWRITE_UNLOCK(ip);
goto out1;
}
if ((new_size = commitZeroLink(tid, ip)) < 0) {
txAbort(tid, 1); /* Marks FS Dirty */
txEnd(tid);
- mutex_unlock(&JFS_IP(dip)->commit_mutex);
mutex_unlock(&JFS_IP(ip)->commit_mutex);
+ mutex_unlock(&JFS_IP(dip)->commit_mutex);
IWRITE_UNLOCK(ip);
rc = new_size;
goto out1;
txEnd(tid);
- mutex_unlock(&JFS_IP(dip)->commit_mutex);
mutex_unlock(&JFS_IP(ip)->commit_mutex);
-
+ mutex_unlock(&JFS_IP(dip)->commit_mutex);
while (new_size && (rc == 0)) {
tid = txBegin(dip->i_sb, 0);
out:
txEnd(tid);
- mutex_unlock(&JFS_IP(dir)->commit_mutex);
mutex_unlock(&JFS_IP(ip)->commit_mutex);
+ mutex_unlock(&JFS_IP(dir)->commit_mutex);
jfs_info("jfs_link: rc:%d", rc);
return rc;
out3:
txEnd(tid);
- mutex_unlock(&JFS_IP(dip)->commit_mutex);
mutex_unlock(&JFS_IP(ip)->commit_mutex);
+ mutex_unlock(&JFS_IP(dip)->commit_mutex);
if (rc) {
free_ea_wmap(ip);
ip->i_nlink = 0;
if (S_ISDIR(new_ip->i_mode)) {
new_ip->i_nlink--;
if (new_ip->i_nlink) {
- mutex_unlock(&JFS_IP(new_dir)->commit_mutex);
- mutex_unlock(&JFS_IP(old_ip)->commit_mutex);
+ mutex_unlock(&JFS_IP(new_ip)->commit_mutex);
if (old_dir != new_dir)
mutex_unlock(&JFS_IP(old_dir)->commit_mutex);
+ mutex_unlock(&JFS_IP(old_ip)->commit_mutex);
+ mutex_unlock(&JFS_IP(new_dir)->commit_mutex);
if (!S_ISDIR(old_ip->i_mode) && new_ip)
IWRITE_UNLOCK(new_ip);
jfs_error(new_ip->i_sb,
out4:
txEnd(tid);
-
- mutex_unlock(&JFS_IP(new_dir)->commit_mutex);
- mutex_unlock(&JFS_IP(old_ip)->commit_mutex);
- if (old_dir != new_dir)
- mutex_unlock(&JFS_IP(old_dir)->commit_mutex);
if (new_ip)
mutex_unlock(&JFS_IP(new_ip)->commit_mutex);
+ if (old_dir != new_dir)
+ mutex_unlock(&JFS_IP(old_dir)->commit_mutex);
+ mutex_unlock(&JFS_IP(old_ip)->commit_mutex);
+ mutex_unlock(&JFS_IP(new_dir)->commit_mutex);
while (new_size && (rc == 0)) {
tid = txBegin(new_ip->i_sb, 0);
if (error)
goto exit_dput;
error = __do_follow_link(&path, nd);
- if (error)
+ if (error) {
+ /* Does someone understand code flow here? Or it is only
+ * me so stupid? Anathema to whoever designed this non-sense
+ * with "intent.open".
+ */
+ release_open_intent(nd);
return error;
+ }
nd->flags &= ~LOOKUP_PARENT;
if (nd->last_type == LAST_BIND)
goto ok;
return nfs_ok;
}
+static inline void nfsd4_increment_op_stats(u32 opnum)
+{
+ if (opnum >= FIRST_NFS4_OP && opnum <= LAST_NFS4_OP)
+ nfsdstats.nfs4_opcount[opnum]++;
+}
+
/*
* COMPOUND call.
/* XXX Ugh, we need to get rid of this kind of special case: */
if (op->opnum == OP_READ && op->u.read.rd_filp)
fput(op->u.read.rd_filp);
+
+ nfsd4_increment_op_stats(op->opnum);
}
out:
/* show my rpc info */
svc_seq_show(seq, &nfsd_svcstats);
+#ifdef CONFIG_NFSD_V4
+ /* Show count for individual nfsv4 operations */
+ /* Writing operation numbers 0 1 2 also for maintaining uniformity */
+ seq_printf(seq,"proc4ops %u", LAST_NFS4_OP + 1);
+ for (i = 0; i <= LAST_NFS4_OP; i++)
+ seq_printf(seq, " %u", nfsdstats.nfs4_opcount[i]);
+
+ seq_putc(seq, '\n');
+#endif
+
return 0;
}
p->start_sect = start;
p->nr_sects = len;
p->partno = part;
+ p->policy = disk->policy;
if (isdigit(disk->kobj.name[strlen(disk->kobj.name)-1]))
snprintf(p->kobj.name,KOBJ_NAME_LEN,"%sp%d",disk->kobj.name,part);
#include <linux/times.h>
#include <linux/cpuset.h>
#include <linux/rcupdate.h>
+#include <linux/delayacct.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
res = sprintf(buffer,"%d (%s) %c %d %d %d %d %d %lu %lu \
%lu %lu %lu %lu %lu %ld %ld %ld %ld %d 0 %llu %lu %ld %lu %lu %lu %lu %lu \
-%lu %lu %lu %lu %lu %lu %lu %lu %d %d %lu %lu\n",
+%lu %lu %lu %lu %lu %lu %lu %lu %d %d %lu %lu %llu\n",
task->pid,
tcomm,
state,
task->exit_signal,
task_cpu(task),
task->rt_priority,
- task->policy);
+ task->policy,
+ (unsigned long long)delayacct_blkio_ticks(task));
if(mm)
mmput(mm);
return res;
return allowed;
}
+static int proc_setattr(struct dentry *dentry, struct iattr *attr)
+{
+ int error;
+ struct inode *inode = dentry->d_inode;
+
+ if (attr->ia_valid & ATTR_MODE)
+ return -EPERM;
+
+ error = inode_change_ok(inode, attr);
+ if (!error) {
+ error = security_inode_setattr(dentry, attr);
+ if (!error)
+ error = inode_setattr(inode, attr);
+ }
+ return error;
+}
+
+static struct inode_operations proc_def_inode_operations = {
+ .setattr = proc_setattr,
+};
+
extern struct seq_operations mounts_op;
struct proc_mounts {
struct seq_file m;
static struct inode_operations proc_pid_link_inode_operations = {
.readlink = proc_pid_readlink,
- .follow_link = proc_pid_follow_link
+ .follow_link = proc_pid_follow_link,
+ .setattr = proc_setattr,
};
static int proc_readfd(struct file * filp, void * dirent, filldir_t filldir)
ei = PROC_I(inode);
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
inode->i_ino = fake_ino(task->pid, ino);
+ inode->i_op = &proc_def_inode_operations;
/*
* grab the reference to task.
inode->i_uid = 0;
inode->i_gid = 0;
}
+ inode->i_mode &= ~(S_ISUID | S_ISGID);
security_task_to_inode(task, inode);
put_task_struct(task);
return 1;
inode->i_uid = 0;
inode->i_gid = 0;
}
+ inode->i_mode &= ~(S_ISUID | S_ISGID);
security_task_to_inode(task, inode);
put_task_struct(task);
return 1;
*/
static struct inode_operations proc_fd_inode_operations = {
.lookup = proc_lookupfd,
+ .setattr = proc_setattr,
};
static struct inode_operations proc_task_inode_operations = {
.lookup = proc_task_lookup,
.getattr = proc_task_getattr,
+ .setattr = proc_setattr,
};
#ifdef CONFIG_SECURITY
static struct inode_operations proc_tgid_base_inode_operations = {
.lookup = proc_tgid_base_lookup,
.getattr = pid_getattr,
+ .setattr = proc_setattr,
};
static struct inode_operations proc_tid_base_inode_operations = {
.lookup = proc_tid_base_lookup,
.getattr = pid_getattr,
+ .setattr = proc_setattr,
};
#ifdef CONFIG_SECURITY
static struct inode_operations proc_tgid_attr_inode_operations = {
.lookup = proc_tgid_attr_lookup,
.getattr = pid_getattr,
+ .setattr = proc_setattr,
};
static struct inode_operations proc_tid_attr_inode_operations = {
.lookup = proc_tid_attr_lookup,
.getattr = pid_getattr,
+ .setattr = proc_setattr,
};
#endif
{
struct inode * root_inode;
- s->s_flags |= MS_NODIRATIME;
+ s->s_flags |= MS_NODIRATIME | MS_NOSUID | MS_NOEXEC;
s->s_blocksize = 1024;
s->s_blocksize_bits = 10;
s->s_magic = PROC_SUPER_MAGIC;
#define kc_offset_to_vaddr(o) ((o) + PAGE_OFFSET)
#endif
-#define roundup(x, y) ((((x)+((y)-1))/(y))*(y))
-
/* An ELF note in memory */
struct memelfnote
{
*/
if (n) {
if (clear_user(buffer + tsz - n,
- tsz - n))
+ n))
return -EFAULT;
}
} else {
/*****************************************************************************/
/*
- * set up a mapping
+ * set up a mapping for shared memory segments
*/
int ramfs_nommu_mmap(struct file *file, struct vm_area_struct *vma)
{
- return 0;
+ return vma->vm_flags & VM_SHARED ? 0 : -ENOSYS;
}
return seg;
}
-EXPORT_SYMBOL(iov_shorten);
+EXPORT_UNUSED_SYMBOL(iov_shorten); /* June 2006 */
/* A write operation does a read from user space and vice versa */
#define vrfy_dir(type) ((type) == READ ? VERIFY_WRITE : VERIFY_READ)
// this sets the proper flags for O_SYNC to trigger a commit
mark_inode_dirty(inode);
reiserfs_write_unlock(inode->i_sb);
- } else
+ } else {
+ reiserfs_write_lock(inode->i_sb);
+ reiserfs_update_inode_transaction(inode);
mark_inode_dirty(inode);
+ reiserfs_write_unlock(inode->i_sb);
+ }
sd_update = 1;
}
int reiserfs_proc_info_init(struct super_block *sb)
{
+ char b[BDEVNAME_SIZE];
+ char *s;
+
+ /* Some block devices use /'s */
+ strlcpy(b, reiserfs_bdevname(sb), BDEVNAME_SIZE);
+ s = strchr(b, '/');
+ if (s)
+ *s = '!';
+
spin_lock_init(&__PINFO(sb).lock);
- REISERFS_SB(sb)->procdir =
- proc_mkdir(reiserfs_bdevname(sb), proc_info_root);
+ REISERFS_SB(sb)->procdir = proc_mkdir(b, proc_info_root);
if (REISERFS_SB(sb)->procdir) {
REISERFS_SB(sb)->procdir->owner = THIS_MODULE;
REISERFS_SB(sb)->procdir->data = sb;
return 0;
}
reiserfs_warning(sb, "reiserfs: cannot create /proc/%s/%s",
- proc_info_root_name, reiserfs_bdevname(sb));
+ proc_info_root_name, b);
return 1;
}
int reiserfs_proc_info_done(struct super_block *sb)
{
struct proc_dir_entry *de = REISERFS_SB(sb)->procdir;
+ char b[BDEVNAME_SIZE];
+ char *s;
+
+ /* Some block devices use /'s */
+ strlcpy(b, reiserfs_bdevname(sb), BDEVNAME_SIZE);
+ s = strchr(b, '/');
+ if (s)
+ *s = '!';
+
if (de) {
remove_proc_entry("journal", de);
remove_proc_entry("oidmap", de);
__PINFO(sb).exiting = 1;
spin_unlock(&__PINFO(sb).lock);
if (proc_info_root) {
- remove_proc_entry(reiserfs_bdevname(sb), proc_info_root);
+ remove_proc_entry(b, proc_info_root);
REISERFS_SB(sb)->procdir = NULL;
}
return 0;
return error;
}
+/*
+ * Make sure there's data to read. Wait for input if we can, otherwise
+ * return an appropriate error.
+ */
+static int link_ipipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
+{
+ int ret;
+
+ /*
+ * Check ->nrbufs without the inode lock first. This function
+ * is speculative anyways, so missing one is ok.
+ */
+ if (pipe->nrbufs)
+ return 0;
+
+ ret = 0;
+ mutex_lock(&pipe->inode->i_mutex);
+
+ while (!pipe->nrbufs) {
+ if (signal_pending(current)) {
+ ret = -ERESTARTSYS;
+ break;
+ }
+ if (!pipe->writers)
+ break;
+ if (!pipe->waiting_writers) {
+ if (flags & SPLICE_F_NONBLOCK) {
+ ret = -EAGAIN;
+ break;
+ }
+ }
+ pipe_wait(pipe);
+ }
+
+ mutex_unlock(&pipe->inode->i_mutex);
+ return ret;
+}
+
+/*
+ * Make sure there's writeable room. Wait for room if we can, otherwise
+ * return an appropriate error.
+ */
+static int link_opipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
+{
+ int ret;
+
+ /*
+ * Check ->nrbufs without the inode lock first. This function
+ * is speculative anyways, so missing one is ok.
+ */
+ if (pipe->nrbufs < PIPE_BUFFERS)
+ return 0;
+
+ ret = 0;
+ mutex_lock(&pipe->inode->i_mutex);
+
+ while (pipe->nrbufs >= PIPE_BUFFERS) {
+ if (!pipe->readers) {
+ send_sig(SIGPIPE, current, 0);
+ ret = -EPIPE;
+ break;
+ }
+ if (flags & SPLICE_F_NONBLOCK) {
+ ret = -EAGAIN;
+ break;
+ }
+ if (signal_pending(current)) {
+ ret = -ERESTARTSYS;
+ break;
+ }
+ pipe->waiting_writers++;
+ pipe_wait(pipe);
+ pipe->waiting_writers--;
+ }
+
+ mutex_unlock(&pipe->inode->i_mutex);
+ return ret;
+}
+
/*
* Link contents of ipipe to opipe.
*/
size_t len, unsigned int flags)
{
struct pipe_buffer *ibuf, *obuf;
- int ret, do_wakeup, i, ipipe_first;
-
- ret = do_wakeup = ipipe_first = 0;
+ int ret = 0, i = 0, nbuf;
/*
* Potential ABBA deadlock, work around it by ordering lock
* could deadlock (one doing tee from A -> B, the other from B -> A).
*/
if (ipipe->inode < opipe->inode) {
- ipipe_first = 1;
- mutex_lock(&ipipe->inode->i_mutex);
- mutex_lock(&opipe->inode->i_mutex);
+ mutex_lock_nested(&ipipe->inode->i_mutex, I_MUTEX_PARENT);
+ mutex_lock_nested(&opipe->inode->i_mutex, I_MUTEX_CHILD);
} else {
- mutex_lock(&opipe->inode->i_mutex);
- mutex_lock(&ipipe->inode->i_mutex);
+ mutex_lock_nested(&opipe->inode->i_mutex, I_MUTEX_PARENT);
+ mutex_lock_nested(&ipipe->inode->i_mutex, I_MUTEX_CHILD);
}
- for (i = 0;; i++) {
+ do {
if (!opipe->readers) {
send_sig(SIGPIPE, current, 0);
if (!ret)
ret = -EPIPE;
break;
}
- if (ipipe->nrbufs - i) {
- ibuf = ipipe->bufs + ((ipipe->curbuf + i) & (PIPE_BUFFERS - 1));
- /*
- * If we have room, fill this buffer
- */
- if (opipe->nrbufs < PIPE_BUFFERS) {
- int nbuf = (opipe->curbuf + opipe->nrbufs) & (PIPE_BUFFERS - 1);
-
- /*
- * Get a reference to this pipe buffer,
- * so we can copy the contents over.
- */
- ibuf->ops->get(ipipe, ibuf);
-
- obuf = opipe->bufs + nbuf;
- *obuf = *ibuf;
-
- /*
- * Don't inherit the gift flag, we need to
- * prevent multiple steals of this page.
- */
- obuf->flags &= ~PIPE_BUF_FLAG_GIFT;
-
- if (obuf->len > len)
- obuf->len = len;
-
- opipe->nrbufs++;
- do_wakeup = 1;
- ret += obuf->len;
- len -= obuf->len;
-
- if (!len)
- break;
- if (opipe->nrbufs < PIPE_BUFFERS)
- continue;
- }
-
- /*
- * We have input available, but no output room.
- * If we already copied data, return that. If we
- * need to drop the opipe lock, it must be ordered
- * last to avoid deadlocks.
- */
- if ((flags & SPLICE_F_NONBLOCK) || !ipipe_first) {
- if (!ret)
- ret = -EAGAIN;
- break;
- }
- if (signal_pending(current)) {
- if (!ret)
- ret = -ERESTARTSYS;
- break;
- }
- if (do_wakeup) {
- smp_mb();
- if (waitqueue_active(&opipe->wait))
- wake_up_interruptible(&opipe->wait);
- kill_fasync(&opipe->fasync_readers, SIGIO, POLL_IN);
- do_wakeup = 0;
- }
+ /*
+ * If we have iterated all input buffers or ran out of
+ * output room, break.
+ */
+ if (i >= ipipe->nrbufs || opipe->nrbufs >= PIPE_BUFFERS)
+ break;
- opipe->waiting_writers++;
- pipe_wait(opipe);
- opipe->waiting_writers--;
- continue;
- }
+ ibuf = ipipe->bufs + ((ipipe->curbuf + i) & (PIPE_BUFFERS - 1));
+ nbuf = (opipe->curbuf + opipe->nrbufs) & (PIPE_BUFFERS - 1);
/*
- * No input buffers, do the usual checks for available
- * writers and blocking and wait if necessary
+ * Get a reference to this pipe buffer,
+ * so we can copy the contents over.
*/
- if (!ipipe->writers)
- break;
- if (!ipipe->waiting_writers) {
- if (ret)
- break;
- }
+ ibuf->ops->get(ipipe, ibuf);
+
+ obuf = opipe->bufs + nbuf;
+ *obuf = *ibuf;
+
/*
- * pipe_wait() drops the ipipe mutex. To avoid deadlocks
- * with another process, we can only safely do that if
- * the ipipe lock is ordered last.
+ * Don't inherit the gift flag, we need to
+ * prevent multiple steals of this page.
*/
- if ((flags & SPLICE_F_NONBLOCK) || ipipe_first) {
- if (!ret)
- ret = -EAGAIN;
- break;
- }
- if (signal_pending(current)) {
- if (!ret)
- ret = -ERESTARTSYS;
- break;
- }
+ obuf->flags &= ~PIPE_BUF_FLAG_GIFT;
- if (waitqueue_active(&ipipe->wait))
- wake_up_interruptible_sync(&ipipe->wait);
- kill_fasync(&ipipe->fasync_writers, SIGIO, POLL_OUT);
+ if (obuf->len > len)
+ obuf->len = len;
- pipe_wait(ipipe);
- }
+ opipe->nrbufs++;
+ ret += obuf->len;
+ len -= obuf->len;
+ i++;
+ } while (len);
mutex_unlock(&ipipe->inode->i_mutex);
mutex_unlock(&opipe->inode->i_mutex);
- if (do_wakeup) {
+ /*
+ * If we put data in the output pipe, wakeup any potential readers.
+ */
+ if (ret > 0) {
smp_mb();
if (waitqueue_active(&opipe->wait))
wake_up_interruptible(&opipe->wait);
{
struct pipe_inode_info *ipipe = in->f_dentry->d_inode->i_pipe;
struct pipe_inode_info *opipe = out->f_dentry->d_inode->i_pipe;
+ int ret = -EINVAL;
/*
- * Link ipipe to the two output pipes, consuming as we go along.
+ * Duplicate the contents of ipipe to opipe without actually
+ * copying the data.
*/
- if (ipipe && opipe)
- return link_pipe(ipipe, opipe, len, flags);
+ if (ipipe && opipe && ipipe != opipe) {
+ /*
+ * Keep going, unless we encounter an error. The ipipe/opipe
+ * ordering doesn't really matter.
+ */
+ ret = link_ipipe_prep(ipipe, flags);
+ if (!ret) {
+ ret = link_opipe_prep(opipe, flags);
+ if (!ret) {
+ ret = link_pipe(ipipe, opipe, len, flags);
+ if (!ret && (flags & SPLICE_F_NONBLOCK))
+ ret = -EAGAIN;
+ }
+ }
+ }
- return -EINVAL;
+ return ret;
}
asmlinkage long sys_tee(int fdin, int fdout, size_t len, unsigned int flags)
inode->i_ctime = iattr->ia_ctime;
}
+
+/*
+ * sysfs has a different i_mutex lock order behavior for i_mutex than other
+ * filesystems; sysfs i_mutex is called in many places with subsystem locks
+ * held. At the same time, many of the VFS locking rules do not apply to
+ * sysfs at all (cross directory rename for example). To untangle this mess
+ * (which gives false positives in lockdep), we're giving sysfs inodes their
+ * own class for i_mutex.
+ */
+static struct lock_class_key sysfs_inode_imutex_key;
+
struct inode * sysfs_new_inode(mode_t mode, struct sysfs_dirent * sd)
{
struct inode * inode = new_inode(sysfs_sb);
inode->i_mapping->a_ops = &sysfs_aops;
inode->i_mapping->backing_dev_info = &sysfs_backing_dev_info;
inode->i_op = &sysfs_inode_operations;
+ lockdep_set_class(&inode->i_mutex, &sysfs_inode_imutex_key);
if (sd->s_iattr) {
/* sysfs_dirent has non-default attributes
#define MIN(a,b) (min(a,b))
#define MAX(a,b) (max(a,b))
#define howmany(x, y) (((x)+((y)-1))/(y))
-#define roundup(x, y) ((((x)+((y)-1))/(y))*(y))
/*
* Various platform dependent calls that don't fit anywhere else
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20060623
+#define ACPI_CA_VERSION 0x20060707
/*
* OS name, used for the _OS object. The _OS object is essentially obsolete,
#define ACPI_EXD_TABLE_SIZE(name) (sizeof(name) / sizeof (struct acpi_exdump_info))
/*
- * If possible, pack the following structure to byte alignment, since we
- * don't care about performance for debug output
+ * If possible, pack the following structures to byte alignment, since we
+ * don't care about performance for debug output. Two cases where we cannot
+ * pack the structures:
+ *
+ * 1) Hardware does not support misaligned memory transfers
+ * 2) Compiler does not support pointers within packed structures
*/
-#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
+#if (!defined(ACPI_MISALIGNMENT_NOT_SUPPORTED) && !defined(ACPI_PACKED_POINTERS_NOT_SUPPORTED))
#pragma pack(1)
#endif
/* This Thread ID means that the mutex is not in use (unlocked) */
-#define ACPI_MUTEX_NOT_ACQUIRED (u32) -1
+#define ACPI_MUTEX_NOT_ACQUIRED (acpi_thread_id) 0
/* Table for the global mutexes */
/* Namespace Node flags */
#define ANOBJ_END_OF_PEER_LIST 0x01 /* End-of-list, Peer field points to parent */
-#define ANOBJ_DATA_WIDTH_32 0x02 /* Parent table uses 32-bit math */
+#define ANOBJ_RESERVED 0x02 /* Available for future use */
#define ANOBJ_METHOD_ARG 0x04 /* Node is a method argument */
#define ANOBJ_METHOD_LOCAL 0x08 /* Node is a method local */
#define ANOBJ_SUBTREE_HAS_INI 0x10 /* Used to optimize device initialization */
/* Memory allocation */
+#ifndef ACPI_ALLOCATE
#define ACPI_ALLOCATE(a) acpi_ut_allocate((acpi_size)(a),_COMPONENT,_acpi_module_name,__LINE__)
+#endif
+#ifndef ACPI_ALLOCATE_ZEROED
#define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed((acpi_size)(a), _COMPONENT,_acpi_module_name,__LINE__)
-#define ACPI_FREE(a) kfree(a)
+#endif
+#ifndef ACPI_FREE
+#define ACPI_FREE(a) acpio_os_free(a)
+#endif
#define ACPI_MEM_TRACKING(a)
#else
/*
* If possible, pack the following structures to byte alignment, since we
- * don't care about performance for debug output
+ * don't care about performance for debug output. Two cases where we cannot
+ * pack the structures:
+ *
+ * 1) Hardware does not support misaligned memory transfers
+ * 2) Compiler does not support pointers within packed structures
*/
-#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
+#if (!defined(ACPI_MISALIGNMENT_NOT_SUPPORTED) && !defined(ACPI_PACKED_POINTERS_NOT_SUPPORTED))
#pragma pack(1)
#endif
#include <asm/acpi.h>
#include <linux/slab.h>
#include <linux/spinlock_types.h>
+#include <asm/current.h>
/* Host-dependent types and defines */
#define acpi_cpu_flags unsigned long
-#define acpi_thread_id u32
+#define acpi_thread_id struct task_struct *
-static inline acpi_thread_id acpi_os_get_thread_id(void) { return 0; }
+static inline acpi_thread_id acpi_os_get_thread_id(void) { return current; }
+
+/*
+ * The irqs_disabled() check is for resume from RAM.
+ * Interrupts are off during resume, just like they are for boot.
+ * However, boot has (system_state != SYSTEM_RUNNING)
+ * to quiet __might_sleep() in kmalloc() and resume does not.
+ */
+#include <acpi/actypes.h>
+static inline void *acpi_os_allocate(acpi_size size) {
+ return kmalloc(size, irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
+}
+static inline void *acpi_os_allocate_zeroed(acpi_size size) {
+ return kzalloc(size, irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
+}
+
+static inline void *acpi_os_acquire_object(acpi_cache_t * cache) {
+ return kmem_cache_zalloc(cache, irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
+}
+
+#define ACPI_ALLOCATE(a) acpi_os_allocate(a)
+#define ACPI_ALLOCATE_ZEROED(a) acpi_os_allocate_zeroed(a)
+#define ACPI_FREE(a) kfree(a)
#endif /* __ACLINUX_H__ */
#define set_mb(var, value) \
do { var = value; mb(); } while (0)
-#define set_wmb(var, value) \
-do { var = value; wmb(); } while (0)
-
#endif /* __BARRIER_H */
#define VERSATILE_SYS_OSC1_OFFSET 0x1C
#endif
+#define VERSATILE_SYS_OSCCLCD_OFFSET 0x1c
+
#define VERSATILE_SYS_LOCK_OFFSET 0x20
#define VERSATILE_SYS_100HZ_OFFSET 0x24
#define VERSATILE_SYS_CFGDATA1_OFFSET 0x28
#define wmb() mb()
#define read_barrier_depends() do { } while(0)
#define set_mb(var, value) do { var = value; mb(); } while (0)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
/*
#define read_barrier_depends() do { } while(0)
#define set_mb(var, value) do { var = value; mb(); } while (0)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
/*
* We assume knowledge of how
#define wmb() mb()
#define read_barrier_depends() do { } while(0)
#define set_mb(var, value) do { var = value; mb(); } while (0)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
#ifdef CONFIG_SMP
#define smp_mb() mb()
#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-typedef struct fpmedia_struct elf_fpregset_t;
+typedef struct user_fpmedia_regs elf_fpregset_t;
/*
* This is used to ensure we don't load something for the wrong architecture.
} while(0)
#define USE_ELF_CORE_DUMP
+#define ELF_FDPIC_CORE_EFLAGS EF_FRV_FDPIC
#define ELF_EXEC_PAGESIZE 16384
/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
#define ELF_ET_DYN_BASE 0x08000000UL
-#define ELF_CORE_COPY_REGS(pr_reg, regs) \
- memcpy(&pr_reg[0], ®s->sp, 31 * sizeof(uint32_t));
-
/* This yields a mask that user programs can use to figure out what
instruction set this cpu supports. */
extern asmlinkage void __debug_stub_init_break(void);
extern asmlinkage void __break_hijack_kernel_event(void);
+extern asmlinkage void __break_hijack_kernel_event_breaks_here(void);
extern asmlinkage void start_kernel(void);
extern asmlinkage void gdbstub_rx_handler(void);
#define gdbstub_proto(FMT,...) ({ 0; })
#endif
+/*
+ * we dedicate GR31 to keeping a pointer to the gdbstub exception frame
+ * - gr31 is destroyed on entry to the gdbstub if !MMU
+ * - gr31 is saved in scr3 on entry to the gdbstub if in !MMU
+ */
+register struct frv_frame0 *__debug_frame0 asm("gr31");
+
+#define __debug_frame (&__debug_frame0->regs)
+#define __debug_user_context (&__debug_frame0->uc)
+#define __debug_regs (&__debug_frame0->debug)
+#define __debug_reg(X) ((unsigned long *) ((unsigned long) &__debug_frame0 + (X)))
+
+struct frv_debug_status {
+ unsigned long bpsr;
+ unsigned long dcr;
+ unsigned long brr;
+ unsigned long nmar;
+};
+
+extern struct frv_debug_status __debug_status;
+
#endif /* _LANGUAGE_ASSEMBLY */
#endif /* __ASM_GDB_STUB_H */
*/
#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+#include <linux/compiler.h>
#include <linux/linkage.h>
#include <asm/sections.h>
#include <asm/segment.h>
extern struct task_struct *alloc_task_struct(void);
extern void free_task_struct(struct task_struct *p);
-#define cpu_relax() do { } while (0)
+#define cpu_relax() barrier()
/* data cache prefetch */
#define ARCH_HAS_PREFETCH
#ifndef __ASSEMBLY__
/*
- * dedicate GR28; to keeping the a pointer to the current exception frame
+ * we dedicate GR28 to keeping a pointer to the current exception frame
+ * - gr28 is destroyed on entry to the kernel from userspace
*/
register struct pt_regs *__frame asm("gr28");
-register struct pt_regs *__debug_frame asm("gr31");
-
-#ifndef container_of
-#define container_of(ptr, type, member) ({ \
- const typeof( ((type *)0)->member ) *__mptr = (ptr); \
- (type *)( (char *)__mptr - offsetof(type,member) );})
-#endif
-
-#define __debug_regs container_of(__debug_frame, struct pt_debug_regs, normal_regs)
#define user_mode(regs) (!((regs)->psr & PSR_S))
#define instruction_pointer(regs) ((regs)->pc)
*
* +0x2000 +----------------------
* | union {
- * | struct user_context
+ * | struct frv_frame0 {
+ * | struct user_context {
+ * | struct user_int_regs
+ * | struct user_fpmedia_regs
+ * | }
+ * | struct frv_debug_regs
+ * | }
* | struct pt_regs [user exception]
* | }
* +---------------------- <-- __kernel_frame0_ptr (maybe GR28)
#define _ASM_REGISTERS_H
#ifndef __ASSEMBLY__
-#define __OFFSET(X) (X)
+#define __OFFSET(X,N) ((X)+(N)*4)
#define __OFFSETC(X,N) xxxxxxxxxxxxxxxxxxxxxxxx
#else
-#define __OFFSET(X) ((X)*4)
-#define __OFFSETC(X,N) ((X)*4+(N))
+#define __OFFSET(X,N) ((X)+(N)*4)
+#define __OFFSETC(X,N) ((X)+(N))
#endif
/*****************************************************************************/
#endif
-#define REG_PSR __OFFSET( 0) /* Processor Status Register */
-#define REG_ISR __OFFSET( 1) /* Integer Status Register */
-#define REG_CCR __OFFSET( 2) /* Condition Code Register */
-#define REG_CCCR __OFFSET( 3) /* Condition Code for Conditional Insns Register */
-#define REG_LR __OFFSET( 4) /* Link Register */
-#define REG_LCR __OFFSET( 5) /* Loop Count Register */
-#define REG_PC __OFFSET( 6) /* Program Counter */
-
-#define REG__STATUS __OFFSET( 7) /* exception status */
#define REG__STATUS_STEP 0x00000001 /* - reenable single stepping on return */
#define REG__STATUS_STEPPED 0x00000002 /* - single step caused exception */
#define REG__STATUS_BROKE 0x00000004 /* - BREAK insn caused exception */
#define REG__STATUS_SYSC_ENTRY 0x40000000 /* - T on syscall entry (ptrace.c only) */
#define REG__STATUS_SYSC_EXIT 0x80000000 /* - T on syscall exit (ptrace.c only) */
-#define REG_SYSCALLNO __OFFSET( 8) /* syscall number or -1 */
-#define REG_ORIG_GR8 __OFFSET( 9) /* saved GR8 for signal handling */
-#define REG_GNER0 __OFFSET(10)
-#define REG_GNER1 __OFFSET(11)
-#define REG_IACC0 __OFFSET(12)
-
-#define REG_TBR __OFFSET(14) /* Trap Vector Register */
-#define REG_GR(R) __OFFSET((14+(R)))
-#define REG__END REG_GR(32)
+#define REG_GR(R) __OFFSET(REG_GR0, (R))
#define REG_SP REG_GR(1)
#define REG_FP REG_GR(2)
/*****************************************************************************/
/*
- * extension tacked in front of the exception frame in debug mode
+ * debugging registers
*/
#ifndef __ASSEMBLY__
-struct pt_debug_regs
+struct frv_debug_regs
{
- unsigned long bpsr;
unsigned long dcr;
- unsigned long brr;
- unsigned long nmar;
- struct pt_regs normal_regs;
+ unsigned long ibar[4] __attribute__((aligned(8)));
+ unsigned long dbar[4] __attribute__((aligned(8)));
+ unsigned long dbdr[4][4] __attribute__((aligned(8)));
+ unsigned long dbmr[4][4] __attribute__((aligned(8)));
} __attribute__((aligned(8)));
#endif
-#define REG_NMAR __OFFSET(-1)
-#define REG_BRR __OFFSET(-2)
-#define REG_DCR __OFFSET(-3)
-#define REG_BPSR __OFFSET(-4)
-#define REG__DEBUG_XTRA __OFFSET(4)
-
/*****************************************************************************/
/*
* userspace registers
void *extension;
} __attribute__((aligned(8)));
+struct frv_frame0 {
+ union {
+ struct pt_regs regs;
+ struct user_context uc;
+ };
+
+ struct frv_debug_regs debug;
+
+} __attribute__((aligned(32)));
+
#endif
-#define NR_USER_INT_REGS (14 + 64)
-#define NR_USER_FPMEDIA_REGS (64 + 2 + 2 + 8 + 8/4 + 1)
-#define NR_USER_CONTEXT (NR_USER_INT_REGS + NR_USER_FPMEDIA_REGS + 1)
-
-#define USER_CONTEXT_SIZE (((NR_USER_CONTEXT + 1) & ~1) * 4)
-
-#define __THREAD_FRAME __OFFSET(0)
-#define __THREAD_CURR __OFFSET(1)
-#define __THREAD_SP __OFFSET(2)
-#define __THREAD_FP __OFFSET(3)
-#define __THREAD_LR __OFFSET(4)
-#define __THREAD_PC __OFFSET(5)
-#define __THREAD_GR(R) __OFFSET(6 + (R) - 16)
-#define __THREAD_FRAME0 __OFFSET(19)
-#define __THREAD_USER __OFFSET(19)
-
-#define __USER_INT __OFFSET(0)
-#define __INT_GR(R) __OFFSET(14 + (R))
-
-#define __USER_FPMEDIA __OFFSET(NR_USER_INT_REGS)
-#define __FPMEDIA_FR(R) __OFFSET(NR_USER_INT_REGS + (R))
-#define __FPMEDIA_FNER(R) __OFFSET(NR_USER_INT_REGS + 64 + (R))
-#define __FPMEDIA_MSR(R) __OFFSET(NR_USER_INT_REGS + 66 + (R))
-#define __FPMEDIA_ACC(R) __OFFSET(NR_USER_INT_REGS + 68 + (R))
-#define __FPMEDIA_ACCG(R) __OFFSETC(NR_USER_INT_REGS + 76, (R))
-#define __FPMEDIA_FSR(R) __OFFSET(NR_USER_INT_REGS + 78 + (R))
+#define __INT_GR(R) __OFFSET(__INT_GR0, (R))
+
+#define __FPMEDIA_FR(R) __OFFSET(__FPMEDIA_FR0, (R))
+#define __FPMEDIA_FNER(R) __OFFSET(__FPMEDIA_FNER0, (R))
+#define __FPMEDIA_MSR(R) __OFFSET(__FPMEDIA_MSR0, (R))
+#define __FPMEDIA_ACC(R) __OFFSET(__FPMEDIA_ACC0, (R))
+#define __FPMEDIA_ACCG(R) __OFFSETC(__FPMEDIA_ACCG0, (R))
+#define __FPMEDIA_FSR(R) __OFFSET(__FPMEDIA_FSR0, (R))
+
+#define __THREAD_GR(R) __OFFSET(__THREAD_GR16, (R) - 16)
#endif /* _ASM_REGISTERS_H */
#define rmb() asm volatile ("membar" : : :"memory")
#define wmb() asm volatile ("membar" : : :"memory")
#define set_mb(var, value) do { var = value; mb(); } while (0)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
#define smp_mb() mb()
#define smp_rmb() rmb()
#include <asm/processor.h>
#endif
+#define THREAD_SIZE 8192
+
/*
* low level task data that entry.S needs immediate access to
* - this struct should fit entirely inside of one cache line
#else /* !__ASSEMBLY__ */
-/* offsets into the thread_info struct for assembly code access */
-#define TI_TASK 0x00000000
-#define TI_EXEC_DOMAIN 0x00000004
-#define TI_FLAGS 0x00000008
-#define TI_STATUS 0x0000000C
-#define TI_CPU 0x00000010
-#define TI_PRE_COUNT 0x00000014
-#define TI_ADDR_LIMIT 0x00000018
-#define TI_RESTART_BLOCK 0x0000001C
+#include <asm/asm-offsets.h>
#endif
#define init_thread_info (init_thread_union.thread_info)
#define init_stack (init_thread_union.stack)
-#ifdef CONFIG_SMALL_TASKS
-#define THREAD_SIZE 4096
-#else
-#define THREAD_SIZE 8192
-#endif
-
/* how to get the thread information struct from C */
register struct thread_info *__current_thread_info asm("gr15");
#define free_thread_info(info) kfree(info)
-#else /* !__ASSEMBLY__ */
-
-#define THREAD_SIZE 8192
-
-#endif
+#endif /* __ASSEMBLY__ */
/*
* thread information flags
unifdef-y += a.out.h auxvec.h byteorder.h errno.h fcntl.h ioctl.h \
- ioctls.h ipcbuf.h irq.h mman.h msgbuf.h param.h poll.h \
+ ioctls.h ipcbuf.h mman.h msgbuf.h param.h poll.h \
posix_types.h ptrace.h resource.h sembuf.h shmbuf.h shmparam.h \
sigcontext.h siginfo.h signal.h socket.h sockios.h stat.h \
statfs.h termbits.h termios.h timex.h types.h unistd.h user.h
-# These really shouldn't be exported
-unifdef-y += atomic.h io.h
-
# These probably shouldn't be exported
unifdef-y += elf.h page.h
#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
-#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
#define pfn_valid(page) (page < max_mapnr)
*/
#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+#include <linux/compiler.h>
#include <asm/segment.h>
#include <asm/fpu.h>
#include <asm/ptrace.h>
eip; })
#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp)
-#define cpu_relax() do { } while (0)
+#define cpu_relax() barrier()
#endif
#define wmb() asm volatile ("" : : :"memory")
#define set_rmb(var, value) do { xchg(&var, value); } while (0)
#define set_mb(var, value) set_rmb(var, value)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
#ifdef CONFIG_SMP
#define smp_mb() mb()
#define savesegment(seg, value) \
asm volatile("mov %%" #seg ",%0":"=rm" (value))
-/*
- * Clear and set 'TS' bit respectively
- */
-#define clts() __asm__ __volatile__ ("clts")
#define read_cr0() ({ \
unsigned int __dummy; \
__asm__ __volatile__( \
__dummy; \
})
#define write_cr0(x) \
- __asm__ __volatile__("movl %0,%%cr0": :"r" (x));
+ __asm__ __volatile__("movl %0,%%cr0": :"r" (x))
#define read_cr2() ({ \
unsigned int __dummy; \
__dummy; \
})
#define write_cr2(x) \
- __asm__ __volatile__("movl %0,%%cr2": :"r" (x));
+ __asm__ __volatile__("movl %0,%%cr2": :"r" (x))
#define read_cr3() ({ \
unsigned int __dummy; \
__dummy; \
})
#define write_cr3(x) \
- __asm__ __volatile__("movl %0,%%cr3": :"r" (x));
+ __asm__ __volatile__("movl %0,%%cr3": :"r" (x))
#define read_cr4() ({ \
unsigned int __dummy; \
:"=r" (__dummy)); \
__dummy; \
})
-
#define read_cr4_safe() ({ \
unsigned int __dummy; \
/* This could fault if %cr4 does not exist */ \
: "=r" (__dummy): "0" (0)); \
__dummy; \
})
-
#define write_cr4(x) \
- __asm__ __volatile__("movl %0,%%cr4": :"r" (x));
+ __asm__ __volatile__("movl %0,%%cr4": :"r" (x))
+
+/*
+ * Clear and set 'TS' bit respectively
+ */
+#define clts() __asm__ __volatile__ ("clts")
#define stts() write_cr0(8 | read_cr0())
#endif /* __KERNEL__ */
#define wbinvd() \
- __asm__ __volatile__ ("wbinvd": : :"memory");
+ __asm__ __volatile__ ("wbinvd": : :"memory")
static inline unsigned long get_limit(unsigned long segment)
{
#define set_mb(var, value) do { var = value; barrier(); } while (0)
#endif
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
-
#include <linux/irqflags.h>
/*
#define TIF_SECCOMP 8 /* secure computing */
#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal() */
#define TIF_MEMDIE 16
+#define TIF_DEBUG 17 /* uses debug registers */
+#define TIF_IO_BITMAP 18 /* uses I/O bitmap */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SECCOMP (1<<TIF_SECCOMP)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
+#define _TIF_DEBUG (1<<TIF_DEBUG)
+#define _TIF_IO_BITMAP (1<<TIF_IO_BITMAP)
/* work to do on interrupt/exception return */
#define _TIF_WORK_MASK \
/* work to do on any return to u-space */
#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP)
+/* flags to check in __switch_to() */
+#define _TIF_WORK_CTXSW (_TIF_DEBUG|_TIF_IO_BITMAP)
+
/*
* Thread-synchronous status.
*
#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
extern u64 kern_mem_attribute (unsigned long phys_addr, unsigned long size);
extern int valid_phys_addr_range (unsigned long addr, size_t count); /* efi.c */
-extern int valid_mmap_phys_addr_range (unsigned long addr, size_t count);
+extern int valid_mmap_phys_addr_range (unsigned long pfn, size_t count);
/*
* The following two macros are deprecated and scheduled for removal.
#endif
/*
- * XXX check on these---I suspect what Linus really wants here is
+ * XXX check on this ---I suspect what Linus really wants here is
* acquire vs release semantics but we can't discuss this stuff with
* Linus just yet. Grrr...
*/
#define set_mb(var, value) do { (var) = (value); mb(); } while (0)
-#define set_wmb(var, value) do { (var) = (value); mb(); } while (0)
#define safe_halt() ia64_pal_halt_light() /* PAL_HALT_LIGHT */
#endif
#define set_mb(var, value) do { xchg(&var, value); } while (0)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
#define arch_align_stack(x) (x)
#define wmb() barrier()
#define read_barrier_depends() do { } while(0)
#define set_mb(var, value) do { xchg(&var, value); } while (0)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
#define smp_mb() barrier()
#define smp_rmb() barrier()
*/
#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+#include <linux/compiler.h>
#include <linux/threads.h>
#include <asm/types.h>
#include <asm/segment.h>
eip; })
#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp)
-#define cpu_relax() do { } while (0)
+#define cpu_relax() barrier()
#endif
#define wmb() asm volatile ("" : : :"memory")
#define set_rmb(var, value) do { xchg(&var, value); } while (0)
#define set_mb(var, value) set_rmb(var, value)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
#ifdef CONFIG_SMP
#define smp_mb() mb()
#define get_user(x, ptr) \
({ \
int __gu_err = 0; \
- typeof(*(ptr)) __gu_val = 0; \
+ typeof(x) __gu_val = 0; \
switch (sizeof(*(ptr))) { \
case 1: \
__get_user_asm(__gu_err, __gu_val, ptr, b, "=d"); \
__get_user_asm(__gu_err, __gu_val, ptr, l, "=r"); \
break; \
case 8: \
- memcpy(&__gu_val, ptr, sizeof (*(ptr))); \
+ memcpy((void *) &__gu_val, ptr, sizeof (*(ptr))); \
break; \
default: \
__gu_val = 0; \
__gu_err = __get_user_bad(); \
break; \
} \
- (x) = __gu_val; \
+ (x) = (typeof(*(ptr))) __gu_val; \
__gu_err; \
})
#define __get_user(x, ptr) get_user(x, ptr)
extern int __get_user_bad(void);
-#define __get_user_asm(err,x,ptr,bwl,reg) \
- __asm__ ("move" #bwl " %1,%0" \
- : "=d" (x) \
+#define __get_user_asm(err,x,ptr,bwl,reg) \
+ __asm__ ("move" #bwl " %1,%0" \
+ : "=d" (x) \
: "m" (*__ptr(ptr)))
#define copy_from_user(to, from, n) (memcpy(to, from, n), 0)
#ifndef MIPS_ASM_SA1100_APM_H
#define MIPS_ASM_SA1100_APM_H
-#include <linux/config.h>
#include <linux/apm_bios.h>
/*
#ifndef _ASM_ATOMIC_H
#define _ASM_ATOMIC_H
+#include <linux/irqflags.h>
#include <asm/cpu-features.h>
-#include <asm/interrupt.h>
#include <asm/war.h>
typedef struct { volatile int counter; } atomic_t;
#ifdef __KERNEL__
-#include <asm/interrupt.h>
+#include <linux/irqflags.h>
#include <asm/sgidefs.h>
#include <asm/war.h>
#define cpu_has_dsp (cpu_data[0].ases & MIPS_ASE_DSP)
#endif
-#ifdef CONFIG_MIPS_MT
#ifndef cpu_has_mipsmt
-# define cpu_has_mipsmt (cpu_data[0].ases & MIPS_ASE_MIPSMT)
-#endif
-#else
-# define cpu_has_mipsmt 0
+#define cpu_has_mipsmt (cpu_data[0].ases & MIPS_ASE_MIPSMT)
#endif
#ifdef CONFIG_32BIT
# define cpu_has_veic 0
#endif
-#ifndef cpu_has_subset_pcaches
-#define cpu_has_subset_pcaches (cpu_data[0].options & MIPS_CPU_SUBSET_CACHES)
+#ifndef cpu_has_inclusive_pcaches
+#define cpu_has_inclusive_pcaches (cpu_data[0].options & MIPS_CPU_INCLUSIVE_CACHES)
#endif
#ifndef cpu_dcache_line_size
#define MIPS_CPU_EJTAG 0x00008000 /* EJTAG exception */
#define MIPS_CPU_NOFPUEX 0x00010000 /* no FPU exception */
#define MIPS_CPU_LLSC 0x00020000 /* CPU has ll/sc instructions */
-#define MIPS_CPU_SUBSET_CACHES 0x00040000 /* P-cache subset enforced */
+#define MIPS_CPU_INCLUSIVE_CACHES 0x00040000 /* P-cache subset enforced */
#define MIPS_CPU_PREFETCH 0x00080000 /* CPU has usable prefetch */
#define MIPS_CPU_VINT 0x00100000 /* CPU supports MIPSR2 vectored interrupts */
#define MIPS_CPU_VEIC 0x00200000 /* CPU supports MIPSR2 external interrupt controller mode */
ins_op, dinsm_op, dinsu_op, dins_op,
bshfl_op = 0x20,
dbshfl_op = 0x24,
- rdhwr_op = 0x3f
+ rdhwr_op = 0x3b
};
/*
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
- * Copyright (C) 1996 by Paul M. Antoine
- * Copyright (C) 1999 Silicon Graphics
- * Copyright (C) 2000 MIPS Technologies, Inc.
- */
-#ifndef _ASM_INTERRUPT_H
-#define _ASM_INTERRUPT_H
-
-#include <asm/hazards.h>
-
-__asm__ (
- " .macro local_irq_enable \n"
- " .set push \n"
- " .set reorder \n"
- " .set noat \n"
-#ifdef CONFIG_MIPS_MT_SMTC
- " mfc0 $1, $2, 1 # SMTC - clear TCStatus.IXMT \n"
- " ori $1, 0x400 \n"
- " xori $1, 0x400 \n"
- " mtc0 $1, $2, 1 \n"
-#elif defined(CONFIG_CPU_MIPSR2)
- " ei \n"
-#else
- " mfc0 $1,$12 \n"
- " ori $1,0x1f \n"
- " xori $1,0x1e \n"
- " mtc0 $1,$12 \n"
-#endif
- " irq_enable_hazard \n"
- " .set pop \n"
- " .endm");
-
-static inline void local_irq_enable(void)
-{
- __asm__ __volatile__(
- "local_irq_enable"
- : /* no outputs */
- : /* no inputs */
- : "memory");
-}
-
-/*
- * For cli() we have to insert nops to make sure that the new value
- * has actually arrived in the status register before the end of this
- * macro.
- * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
- * no nops at all.
- */
-/*
- * For TX49, operating only IE bit is not enough.
- *
- * If mfc0 $12 follows store and the mfc0 is last instruction of a
- * page and fetching the next instruction causes TLB miss, the result
- * of the mfc0 might wrongly contain EXL bit.
- *
- * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
- *
- * Workaround: mask EXL bit of the result or place a nop before mfc0.
- */
-__asm__ (
- " .macro local_irq_disable\n"
- " .set push \n"
- " .set noat \n"
-#ifdef CONFIG_MIPS_MT_SMTC
- " mfc0 $1, $2, 1 \n"
- " ori $1, 0x400 \n"
- " .set noreorder \n"
- " mtc0 $1, $2, 1 \n"
-#elif defined(CONFIG_CPU_MIPSR2)
- " di \n"
-#else
- " mfc0 $1,$12 \n"
- " ori $1,0x1f \n"
- " xori $1,0x1f \n"
- " .set noreorder \n"
- " mtc0 $1,$12 \n"
-#endif
- " irq_disable_hazard \n"
- " .set pop \n"
- " .endm \n");
-
-static inline void local_irq_disable(void)
-{
- __asm__ __volatile__(
- "local_irq_disable"
- : /* no outputs */
- : /* no inputs */
- : "memory");
-}
-
-__asm__ (
- " .macro local_save_flags flags \n"
- " .set push \n"
- " .set reorder \n"
-#ifdef CONFIG_MIPS_MT_SMTC
- " mfc0 \\flags, $2, 1 \n"
-#else
- " mfc0 \\flags, $12 \n"
-#endif
- " .set pop \n"
- " .endm \n");
-
-#define local_save_flags(x) \
-__asm__ __volatile__( \
- "local_save_flags %0" \
- : "=r" (x))
-
-__asm__ (
- " .macro local_irq_save result \n"
- " .set push \n"
- " .set reorder \n"
- " .set noat \n"
-#ifdef CONFIG_MIPS_MT_SMTC
- " mfc0 \\result, $2, 1 \n"
- " ori $1, \\result, 0x400 \n"
- " .set noreorder \n"
- " mtc0 $1, $2, 1 \n"
- " andi \\result, \\result, 0x400 \n"
-#elif defined(CONFIG_CPU_MIPSR2)
- " di \\result \n"
- " andi \\result, 1 \n"
-#else
- " mfc0 \\result, $12 \n"
- " ori $1, \\result, 0x1f \n"
- " xori $1, 0x1f \n"
- " .set noreorder \n"
- " mtc0 $1, $12 \n"
-#endif
- " irq_disable_hazard \n"
- " .set pop \n"
- " .endm \n");
-
-#define local_irq_save(x) \
-__asm__ __volatile__( \
- "local_irq_save\t%0" \
- : "=r" (x) \
- : /* no inputs */ \
- : "memory")
-
-__asm__ (
- " .macro local_irq_restore flags \n"
- " .set push \n"
- " .set noreorder \n"
- " .set noat \n"
-#ifdef CONFIG_MIPS_MT_SMTC
- "mfc0 $1, $2, 1 \n"
- "andi \\flags, 0x400 \n"
- "ori $1, 0x400 \n"
- "xori $1, 0x400 \n"
- "or \\flags, $1 \n"
- "mtc0 \\flags, $2, 1 \n"
-#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
- /*
- * Slow, but doesn't suffer from a relativly unlikely race
- * condition we're having since days 1.
- */
- " beqz \\flags, 1f \n"
- " di \n"
- " ei \n"
- "1: \n"
-#elif defined(CONFIG_CPU_MIPSR2)
- /*
- * Fast, dangerous. Life is fun, life is good.
- */
- " mfc0 $1, $12 \n"
- " ins $1, \\flags, 0, 1 \n"
- " mtc0 $1, $12 \n"
-#else
- " mfc0 $1, $12 \n"
- " andi \\flags, 1 \n"
- " ori $1, 0x1f \n"
- " xori $1, 0x1f \n"
- " or \\flags, $1 \n"
- " mtc0 \\flags, $12 \n"
-#endif
- " irq_disable_hazard \n"
- " .set pop \n"
- " .endm \n");
-
-#define local_irq_restore(flags) \
-do { \
- unsigned long __tmp1; \
- \
- __asm__ __volatile__( \
- "local_irq_restore\t%0" \
- : "=r" (__tmp1) \
- : "0" (flags) \
- : "memory"); \
-} while(0)
-
-static inline int irqs_disabled(void)
-{
-#ifdef CONFIG_MIPS_MT_SMTC
- /*
- * SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU
- */
- unsigned long __result;
-
- __asm__ __volatile__(
- " .set noreorder \n"
- " mfc0 %0, $2, 1 \n"
- " andi %0, 0x400 \n"
- " slt %0, $0, %0 \n"
- " .set reorder \n"
- : "=r" (__result));
-
- return __result;
-#else
- unsigned long flags;
- local_save_flags(flags);
-
- return !(flags & 1);
-#endif
-}
-
-#endif /* _ASM_INTERRUPT_H */
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1996 by Paul M. Antoine
+ * Copyright (C) 1999 Silicon Graphics
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/hazards.h>
+
+__asm__ (
+ " .macro raw_local_irq_enable \n"
+ " .set push \n"
+ " .set reorder \n"
+ " .set noat \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ " mfc0 $1, $2, 1 # SMTC - clear TCStatus.IXMT \n"
+ " ori $1, 0x400 \n"
+ " xori $1, 0x400 \n"
+ " mtc0 $1, $2, 1 \n"
+#elif defined(CONFIG_CPU_MIPSR2)
+ " ei \n"
+#else
+ " mfc0 $1,$12 \n"
+ " ori $1,0x1f \n"
+ " xori $1,0x1e \n"
+ " mtc0 $1,$12 \n"
+#endif
+ " irq_enable_hazard \n"
+ " .set pop \n"
+ " .endm");
+
+static inline void raw_local_irq_enable(void)
+{
+ __asm__ __volatile__(
+ "raw_local_irq_enable"
+ : /* no outputs */
+ : /* no inputs */
+ : "memory");
+}
+
+/*
+ * For cli() we have to insert nops to make sure that the new value
+ * has actually arrived in the status register before the end of this
+ * macro.
+ * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
+ * no nops at all.
+ */
+/*
+ * For TX49, operating only IE bit is not enough.
+ *
+ * If mfc0 $12 follows store and the mfc0 is last instruction of a
+ * page and fetching the next instruction causes TLB miss, the result
+ * of the mfc0 might wrongly contain EXL bit.
+ *
+ * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
+ *
+ * Workaround: mask EXL bit of the result or place a nop before mfc0.
+ */
+__asm__ (
+ " .macro raw_local_irq_disable\n"
+ " .set push \n"
+ " .set noat \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ " mfc0 $1, $2, 1 \n"
+ " ori $1, 0x400 \n"
+ " .set noreorder \n"
+ " mtc0 $1, $2, 1 \n"
+#elif defined(CONFIG_CPU_MIPSR2)
+ " di \n"
+#else
+ " mfc0 $1,$12 \n"
+ " ori $1,0x1f \n"
+ " xori $1,0x1f \n"
+ " .set noreorder \n"
+ " mtc0 $1,$12 \n"
+#endif
+ " irq_disable_hazard \n"
+ " .set pop \n"
+ " .endm \n");
+
+static inline void raw_local_irq_disable(void)
+{
+ __asm__ __volatile__(
+ "raw_local_irq_disable"
+ : /* no outputs */
+ : /* no inputs */
+ : "memory");
+}
+
+__asm__ (
+ " .macro raw_local_save_flags flags \n"
+ " .set push \n"
+ " .set reorder \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ " mfc0 \\flags, $2, 1 \n"
+#else
+ " mfc0 \\flags, $12 \n"
+#endif
+ " .set pop \n"
+ " .endm \n");
+
+#define raw_local_save_flags(x) \
+__asm__ __volatile__( \
+ "raw_local_save_flags %0" \
+ : "=r" (x))
+
+__asm__ (
+ " .macro raw_local_irq_save result \n"
+ " .set push \n"
+ " .set reorder \n"
+ " .set noat \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ " mfc0 \\result, $2, 1 \n"
+ " ori $1, \\result, 0x400 \n"
+ " .set noreorder \n"
+ " mtc0 $1, $2, 1 \n"
+ " andi \\result, \\result, 0x400 \n"
+#elif defined(CONFIG_CPU_MIPSR2)
+ " di \\result \n"
+ " andi \\result, 1 \n"
+#else
+ " mfc0 \\result, $12 \n"
+ " ori $1, \\result, 0x1f \n"
+ " xori $1, 0x1f \n"
+ " .set noreorder \n"
+ " mtc0 $1, $12 \n"
+#endif
+ " irq_disable_hazard \n"
+ " .set pop \n"
+ " .endm \n");
+
+#define raw_local_irq_save(x) \
+__asm__ __volatile__( \
+ "raw_local_irq_save\t%0" \
+ : "=r" (x) \
+ : /* no inputs */ \
+ : "memory")
+
+__asm__ (
+ " .macro raw_local_irq_restore flags \n"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ "mfc0 $1, $2, 1 \n"
+ "andi \\flags, 0x400 \n"
+ "ori $1, 0x400 \n"
+ "xori $1, 0x400 \n"
+ "or \\flags, $1 \n"
+ "mtc0 \\flags, $2, 1 \n"
+#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
+ /*
+ * Slow, but doesn't suffer from a relativly unlikely race
+ * condition we're having since days 1.
+ */
+ " beqz \\flags, 1f \n"
+ " di \n"
+ " ei \n"
+ "1: \n"
+#elif defined(CONFIG_CPU_MIPSR2)
+ /*
+ * Fast, dangerous. Life is fun, life is good.
+ */
+ " mfc0 $1, $12 \n"
+ " ins $1, \\flags, 0, 1 \n"
+ " mtc0 $1, $12 \n"
+#else
+ " mfc0 $1, $12 \n"
+ " andi \\flags, 1 \n"
+ " ori $1, 0x1f \n"
+ " xori $1, 0x1f \n"
+ " or \\flags, $1 \n"
+ " mtc0 \\flags, $12 \n"
+#endif
+ " irq_disable_hazard \n"
+ " .set pop \n"
+ " .endm \n");
+
+#define raw_local_irq_restore(flags) \
+do { \
+ unsigned long __tmp1; \
+ \
+ __asm__ __volatile__( \
+ "raw_local_irq_restore\t%0" \
+ : "=r" (__tmp1) \
+ : "0" (flags) \
+ : "memory"); \
+} while(0)
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU
+ */
+ return flags & 0x400;
+#else
+ return !(flags & 1);
+#endif
+}
+
+#endif
+
+/*
+ * Do the CPU's IRQ-state tracing from assembly code.
+ */
+#ifdef CONFIG_TRACE_IRQFLAGS
+# define TRACE_IRQS_ON \
+ jal trace_hardirqs_on
+# define TRACE_IRQS_OFF \
+ jal trace_hardirqs_off
+#else
+# define TRACE_IRQS_ON
+# define TRACE_IRQS_OFF
+#endif
+
+#endif /* _ASM_IRQFLAGS_H */
#define cpu_has_mcheck 0
#define cpu_has_ejtag 0
-#define cpu_has_subset_pcaches 0
+#define cpu_has_inclusive_pcaches 0
#define cpu_dcache_line_size() 32
#define cpu_icache_line_size() 32
#define cpu_scache_line_size() 0
extern volatile u8 *dec_rtc_base;
+#define ARCH_RTC_LOCATION
+
#define RTC_PORT(x) CPHYSADDR((long)dec_rtc_base)
#define RTC_IO_EXTENT dec_kn_slot_size
#define RTC_IOMAPPED 0
#define cpu_has_nofpuex 0
#define cpu_has_64bits 1
-#define cpu_has_subset_pcaches 0
+#define cpu_has_inclusive_pcaches 0
#define cpu_dcache_line_size() 32
#define cpu_icache_line_size() 32
#ifndef __EXCITE_H__
#define __EXCITE_H__
-#include <linux/config.h>
#include <linux/init.h>
#include <asm/addrspace.h>
#include <asm/types.h>
#define cpu_has_4kex 1
#define cpu_has_4k_cache 1
-#define cpu_has_subset_pcaches 1
+#define cpu_has_inclusive_pcaches 1
#define cpu_dcache_line_size() 32
#define cpu_icache_line_size() 64
#define cpu_has_nofpuex 0
#define cpu_has_64bits 1
-#define cpu_has_subset_pcaches 0
+#define cpu_has_inclusive_pcaches 0
#define cpu_dcache_line_size() 32
#define cpu_icache_line_size() 32
#define cpu_has_nofpuex 0
/* #define cpu_has_64bits ? */
/* #define cpu_has_64bit_zero_reg ? */
-/* #define cpu_has_subset_pcaches ? */
+/* #define cpu_has_inclusive_pcaches ? */
#define cpu_icache_snoops_remote_store 1
#endif
#define cpu_has_nofpuex 0
/* #define cpu_has_64bits ? */
/* #define cpu_has_64bit_zero_reg ? */
-/* #define cpu_has_subset_pcaches ? */
+/* #define cpu_has_inclusive_pcaches ? */
#define cpu_icache_snoops_remote_store 1
#endif
#define cpu_has_nofpuex 0
#define cpu_has_64bits 1
-#define cpu_has_subset_pcaches 0
+#define cpu_has_inclusive_pcaches 0
#define cpu_dcache_line_size() 32
#define cpu_icache_line_size() 32
#define cpu_has_nofpuex 0
#define cpu_has_64bits 1
-#define cpu_has_subset_pcaches 0
+#define cpu_has_inclusive_pcaches 0
#define cpu_dcache_line_size() 32
#define cpu_icache_line_size() 32
#define cpu_has_nofpuex 0
/* #define cpu_has_64bits ? */
/* #define cpu_has_64bit_zero_reg ? */
-/* #define cpu_has_subset_pcaches ? */
+/* #define cpu_has_inclusive_pcaches ? */
#endif
#ifdef CONFIG_CPU_MIPS64
#define cpu_has_nofpuex 0
/* #define cpu_has_64bits ? */
/* #define cpu_has_64bit_zero_reg ? */
-/* #define cpu_has_subset_pcaches ? */
+/* #define cpu_has_inclusive_pcaches ? */
#endif
#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */
#define cpu_has_nofpuex 0
#define cpu_has_64bits 1
-#define cpu_has_subset_pcaches 0
+#define cpu_has_inclusive_pcaches 0
#define cpu_dcache_line_size() 32
#define cpu_icache_line_size() 32
/* Bits specific to the VR41xx. */
#define VR41_CONF_CS (_ULCAST_(1) << 12)
+#define VR41_CONF_P4K (_ULCAST_(1) << 13)
+#define VR41_CONF_BP (_ULCAST_(1) << 16)
#define VR41_CONF_M16 (_ULCAST_(1) << 20)
#define VR41_CONF_AD (_ULCAST_(1) << 23)
#else /* SMTC versions that manage MT scheduling */
-#include <asm/interrupt.h>
+#include <linux/irqflags.h>
/*
* This is a duplicate of dmt() in mipsmtregs.h to avoid problems with
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
-#ifndef CONFIG_SPARSEMEM
-#ifndef CONFIG_NEED_MULTIPLE_NODES
-#define pfn_valid(pfn) ((pfn) < max_mapnr)
-#endif
-#endif
-
#ifdef CONFIG_FLATMEM
#define pfn_valid(pfn) ((pfn) < max_mapnr)
+#elif defined(CONFIG_SPARSEMEM)
+
+/* pfn_valid is defined in linux/mmzone.h */
+
#elif defined(CONFIG_NEED_MULTIPLE_NODES)
#define pfn_valid(pfn) \
: 0); \
})
-#else
-#error Provide a definition of pfn_valid
#endif
#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
#define _ASM_SYSTEM_H
#include <linux/types.h>
+#include <linux/irqflags.h>
#include <asm/addrspace.h>
#include <asm/cpu-features.h>
#include <asm/dsp.h>
#include <asm/ptrace.h>
#include <asm/war.h>
-#include <asm/interrupt.h>
/*
* read_barrier_depends - Flush all pending reads that subsequents reads
#define set_mb(var, value) \
do { var = value; mb(); } while (0)
-#define set_wmb(var, value) \
-do { var = value; wmb(); } while (0)
-
/*
* switch_to(n) should switch tasks to task nr n, first
* checking that n isn't the current task, in which case it does nothing.
/*
* board specific routines required by time_init().
* board_time_init is defaulted to NULL and can remain so.
- * board_timer_setup must be setup properly in machine setup routine.
+ * plat_timer_setup must be setup properly in machine setup routine.
*/
struct irqaction;
extern void (*board_time_init)(void);
-extern void (*board_timer_setup)(struct irqaction *irq);
+extern void plat_timer_setup(struct irqaction *irq);
/*
* mips_hpt_frequency - must be set if you intend to use an R4k-compatible
#define __NR_splice (__NR_Linux + 304)
#define __NR_sync_file_range (__NR_Linux + 305)
#define __NR_tee (__NR_Linux + 306)
+#define __NR_vmsplice (__NR_Linux + 307)
+#define __NR_move_pages (__NR_Linux + 308)
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 306
+#define __NR_Linux_syscalls 308
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 306
+#define __NR_O32_Linux_syscalls 308
#if _MIPS_SIM == _MIPS_SIM_ABI64
#define __NR_splice (__NR_Linux + 263)
#define __NR_sync_file_range (__NR_Linux + 264)
#define __NR_tee (__NR_Linux + 265)
+#define __NR_vmsplice (__NR_Linux + 266)
+#define __NR_move_pages (__NR_Linux + 267)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 265
+#define __NR_Linux_syscalls 267
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 265
+#define __NR_64_Linux_syscalls 267
#if _MIPS_SIM == _MIPS_SIM_NABI32
#define __NR_splice (__NR_Linux + 267)
#define __NR_sync_file_range (__NR_Linux + 268)
#define __NR_tee (__NR_Linux + 269)
+#define __NR_vmsplice (__NR_Linux + 270)
+#define __NR_move_pages (__NR_Linux + 271)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 269
+#define __NR_Linux_syscalls 271
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 269
+#define __NR_N32_Linux_syscalls 271
#ifdef __KERNEL__
#ifndef __ZAO_CAPCELLA_H
#define __ZAO_CAPCELLA_H
-#include <asm/vr41xx/vr41xx.h>
+#include <asm/vr41xx/irq.h>
/*
* General-Purpose I/O Pin Number
#ifndef __NEC_CMBVR4133_H
#define __NEC_CMBVR4133_H
-#include <asm/addrspace.h>
-#include <asm/vr41xx/vr41xx.h>
+#include <asm/vr41xx/irq.h>
/*
* General-Purpose I/O Pin Number
#define IDE_SECONDARY_IRQ I8259_IRQ(15)
#define I8259_IRQ_LAST IDE_SECONDARY_IRQ
-#define RTC_PORT(x) (0xaf000100 + (x))
-#define RTC_IO_EXTENT 0x140
-
#endif /* __NEC_CMBVR4133_H */
+++ /dev/null
-/*
- * e55.h, Include file for CASIO CASSIOPEIA E-10/15/55/65.
- *
- * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __CASIO_E55_H
-#define __CASIO_E55_H
-
-#include <asm/addrspace.h>
-#include <asm/vr41xx/vr41xx.h>
-
-/*
- * Board specific address mapping
- */
-#define VR41XX_ISA_MEM_BASE 0x10000000
-#define VR41XX_ISA_MEM_SIZE 0x04000000
-
-/* VR41XX_ISA_IO_BASE includes offset from real base. */
-#define VR41XX_ISA_IO_BASE 0x1400c000
-#define VR41XX_ISA_IO_SIZE 0x03ff4000
-
-#define ISA_BUS_IO_BASE 0
-#define ISA_BUS_IO_SIZE VR41XX_ISA_IO_SIZE
-
-#define IO_PORT_BASE KSEG1ADDR(VR41XX_ISA_IO_BASE)
-#define IO_PORT_RESOURCE_START ISA_BUS_IO_BASE
-#define IO_PORT_RESOURCE_END (ISA_BUS_IO_BASE + ISA_BUS_IO_SIZE - 1)
-
-#endif /* __CASIO_E55_H */
--- /dev/null
+/*
+ * include/asm-mips/vr41xx/irq.h
+ *
+ * Interrupt numbers for NEC VR4100 series.
+ *
+ * Copyright (C) 1999 Michael Klar
+ * Copyright (C) 2001, 2002 Paul Mundt
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ * Copyright (C) 2002 TimeSys Corp.
+ * Copyright (C) 2003-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __NEC_VR41XX_IRQ_H
+#define __NEC_VR41XX_IRQ_H
+
+/*
+ * CPU core Interrupt Numbers
+ */
+#define MIPS_CPU_IRQ_BASE 0
+#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x))
+#define MIPS_SOFTINT0_IRQ MIPS_CPU_IRQ(0)
+#define MIPS_SOFTINT1_IRQ MIPS_CPU_IRQ(1)
+#define INT0_IRQ MIPS_CPU_IRQ(2)
+#define INT1_IRQ MIPS_CPU_IRQ(3)
+#define INT2_IRQ MIPS_CPU_IRQ(4)
+#define INT3_IRQ MIPS_CPU_IRQ(5)
+#define INT4_IRQ MIPS_CPU_IRQ(6)
+#define TIMER_IRQ MIPS_CPU_IRQ(7)
+
+/*
+ * SYINT1 Interrupt Numbers
+ */
+#define SYSINT1_IRQ_BASE 8
+#define SYSINT1_IRQ(x) (SYSINT1_IRQ_BASE + (x))
+#define BATTRY_IRQ SYSINT1_IRQ(0)
+#define POWER_IRQ SYSINT1_IRQ(1)
+#define RTCLONG1_IRQ SYSINT1_IRQ(2)
+#define ELAPSEDTIME_IRQ SYSINT1_IRQ(3)
+/* RFU */
+#define PIU_IRQ SYSINT1_IRQ(5)
+#define AIU_IRQ SYSINT1_IRQ(6)
+#define KIU_IRQ SYSINT1_IRQ(7)
+#define GIUINT_IRQ SYSINT1_IRQ(8)
+#define SIU_IRQ SYSINT1_IRQ(9)
+#define BUSERR_IRQ SYSINT1_IRQ(10)
+#define SOFTINT_IRQ SYSINT1_IRQ(11)
+#define CLKRUN_IRQ SYSINT1_IRQ(12)
+#define DOZEPIU_IRQ SYSINT1_IRQ(13)
+#define SYSINT1_IRQ_LAST DOZEPIU_IRQ
+
+/*
+ * SYSINT2 Interrupt Numbers
+ */
+#define SYSINT2_IRQ_BASE 24
+#define SYSINT2_IRQ(x) (SYSINT2_IRQ_BASE + (x))
+#define RTCLONG2_IRQ SYSINT2_IRQ(0)
+#define LED_IRQ SYSINT2_IRQ(1)
+#define HSP_IRQ SYSINT2_IRQ(2)
+#define TCLOCK_IRQ SYSINT2_IRQ(3)
+#define FIR_IRQ SYSINT2_IRQ(4)
+#define CEU_IRQ SYSINT2_IRQ(4) /* same number as FIR_IRQ */
+#define DSIU_IRQ SYSINT2_IRQ(5)
+#define PCI_IRQ SYSINT2_IRQ(6)
+#define SCU_IRQ SYSINT2_IRQ(7)
+#define CSI_IRQ SYSINT2_IRQ(8)
+#define BCU_IRQ SYSINT2_IRQ(9)
+#define ETHERNET_IRQ SYSINT2_IRQ(10)
+#define SYSINT2_IRQ_LAST ETHERNET_IRQ
+
+/*
+ * GIU Interrupt Numbers
+ */
+#define GIU_IRQ_BASE 40
+#define GIU_IRQ(x) (GIU_IRQ_BASE + (x)) /* IRQ 40-71 */
+#define GIU_IRQ_LAST GIU_IRQ(31)
+
+/*
+ * VRC4173 Interrupt Numbers
+ */
+#define VRC4173_IRQ_BASE 72
+#define VRC4173_IRQ(x) (VRC4173_IRQ_BASE + (x))
+#define VRC4173_USB_IRQ VRC4173_IRQ(0)
+#define VRC4173_PCMCIA2_IRQ VRC4173_IRQ(1)
+#define VRC4173_PCMCIA1_IRQ VRC4173_IRQ(2)
+#define VRC4173_PS2CH2_IRQ VRC4173_IRQ(3)
+#define VRC4173_PS2CH1_IRQ VRC4173_IRQ(4)
+#define VRC4173_PIU_IRQ VRC4173_IRQ(5)
+#define VRC4173_AIU_IRQ VRC4173_IRQ(6)
+#define VRC4173_KIU_IRQ VRC4173_IRQ(7)
+#define VRC4173_GIU_IRQ VRC4173_IRQ(8)
+#define VRC4173_AC97_IRQ VRC4173_IRQ(9)
+#define VRC4173_AC97INT1_IRQ VRC4173_IRQ(10)
+/* RFU */
+#define VRC4173_DOZEPIU_IRQ VRC4173_IRQ(13)
+#define VRC4173_IRQ_LAST VRC4173_DOZEPIU_IRQ
+
+#endif /* __NEC_VR41XX_IRQ_H */
#ifndef __VICTOR_MPC30X_H
#define __VICTOR_MPC30X_H
-#include <asm/vr41xx/vr41xx.h>
+#include <asm/vr41xx/irq.h>
/*
* General-Purpose I/O Pin Number
#ifndef __TANBAC_TB0219_H
#define __TANBAC_TB0219_H
-#include <asm/vr41xx/vr41xx.h>
+#include <asm/vr41xx/irq.h>
/*
* General-Purpose I/O Pin Number
#ifndef __TANBAC_TB0226_H
#define __TANBAC_TB0226_H
-#include <asm/vr41xx/vr41xx.h>
+#include <asm/vr41xx/irq.h>
/*
* General-Purpose I/O Pin Number
#ifndef __TANBAC_TB0287_H
#define __TANBAC_TB0287_H
-#include <asm/vr41xx/vr41xx.h>
+#include <asm/vr41xx/irq.h>
/*
* General-Purpose I/O Pin Number
/*
* Interrupt Control Unit
*/
-/* CPU core Interrupt Numbers */
-#define MIPS_CPU_IRQ_BASE 0
-#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x))
-#define MIPS_SOFTINT0_IRQ MIPS_CPU_IRQ(0)
-#define MIPS_SOFTINT1_IRQ MIPS_CPU_IRQ(1)
-#define INT0_IRQ MIPS_CPU_IRQ(2)
-#define INT1_IRQ MIPS_CPU_IRQ(3)
-#define INT2_IRQ MIPS_CPU_IRQ(4)
-#define INT3_IRQ MIPS_CPU_IRQ(5)
-#define INT4_IRQ MIPS_CPU_IRQ(6)
-#define TIMER_IRQ MIPS_CPU_IRQ(7)
-
-/* SYINT1 Interrupt Numbers */
-#define SYSINT1_IRQ_BASE 8
-#define SYSINT1_IRQ(x) (SYSINT1_IRQ_BASE + (x))
-#define BATTRY_IRQ SYSINT1_IRQ(0)
-#define POWER_IRQ SYSINT1_IRQ(1)
-#define RTCLONG1_IRQ SYSINT1_IRQ(2)
-#define ELAPSEDTIME_IRQ SYSINT1_IRQ(3)
-/* RFU */
-#define PIU_IRQ SYSINT1_IRQ(5)
-#define AIU_IRQ SYSINT1_IRQ(6)
-#define KIU_IRQ SYSINT1_IRQ(7)
-#define GIUINT_IRQ SYSINT1_IRQ(8)
-#define SIU_IRQ SYSINT1_IRQ(9)
-#define BUSERR_IRQ SYSINT1_IRQ(10)
-#define SOFTINT_IRQ SYSINT1_IRQ(11)
-#define CLKRUN_IRQ SYSINT1_IRQ(12)
-#define DOZEPIU_IRQ SYSINT1_IRQ(13)
-#define SYSINT1_IRQ_LAST DOZEPIU_IRQ
-
-/* SYSINT2 Interrupt Numbers */
-#define SYSINT2_IRQ_BASE 24
-#define SYSINT2_IRQ(x) (SYSINT2_IRQ_BASE + (x))
-#define RTCLONG2_IRQ SYSINT2_IRQ(0)
-#define LED_IRQ SYSINT2_IRQ(1)
-#define HSP_IRQ SYSINT2_IRQ(2)
-#define TCLOCK_IRQ SYSINT2_IRQ(3)
-#define FIR_IRQ SYSINT2_IRQ(4)
-#define CEU_IRQ SYSINT2_IRQ(4) /* same number as FIR_IRQ */
-#define DSIU_IRQ SYSINT2_IRQ(5)
-#define PCI_IRQ SYSINT2_IRQ(6)
-#define SCU_IRQ SYSINT2_IRQ(7)
-#define CSI_IRQ SYSINT2_IRQ(8)
-#define BCU_IRQ SYSINT2_IRQ(9)
-#define ETHERNET_IRQ SYSINT2_IRQ(10)
-#define SYSINT2_IRQ_LAST ETHERNET_IRQ
-
-/* GIU Interrupt Numbers */
-#define GIU_IRQ_BASE 40
-#define GIU_IRQ(x) (GIU_IRQ_BASE + (x)) /* IRQ 40-71 */
-#define GIU_IRQ_LAST GIU_IRQ(31)
-
extern int vr41xx_set_intassign(unsigned int irq, unsigned char intassign);
extern int cascade_irq(unsigned int irq, int (*get_irq)(unsigned int, struct pt_regs *));
+++ /dev/null
-/*
- * vrc4173.h, Include file for NEC VRC4173.
- *
- * Copyright (C) 2000 Michael R. McDonald
- * Copyright (C) 2001-2003 Montavista Software Inc.
- * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com>
- * Copyright (C) 2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
- * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __NEC_VRC4173_H
-#define __NEC_VRC4173_H
-
-#include <asm/io.h>
-
-/*
- * Interrupt Number
- */
-#define VRC4173_IRQ_BASE 72
-#define VRC4173_IRQ(x) (VRC4173_IRQ_BASE + (x))
-#define VRC4173_USB_IRQ VRC4173_IRQ(0)
-#define VRC4173_PCMCIA2_IRQ VRC4173_IRQ(1)
-#define VRC4173_PCMCIA1_IRQ VRC4173_IRQ(2)
-#define VRC4173_PS2CH2_IRQ VRC4173_IRQ(3)
-#define VRC4173_PS2CH1_IRQ VRC4173_IRQ(4)
-#define VRC4173_PIU_IRQ VRC4173_IRQ(5)
-#define VRC4173_AIU_IRQ VRC4173_IRQ(6)
-#define VRC4173_KIU_IRQ VRC4173_IRQ(7)
-#define VRC4173_GIU_IRQ VRC4173_IRQ(8)
-#define VRC4173_AC97_IRQ VRC4173_IRQ(9)
-#define VRC4173_AC97INT1_IRQ VRC4173_IRQ(10)
-/* RFU */
-#define VRC4173_DOZEPIU_IRQ VRC4173_IRQ(13)
-#define VRC4173_IRQ_LAST VRC4173_DOZEPIU_IRQ
-
-/*
- * PCI I/O accesses
- */
-#ifdef CONFIG_VRC4173
-
-extern unsigned long vrc4173_io_offset;
-
-#define set_vrc4173_io_offset(offset) do { vrc4173_io_offset = (offset); } while (0)
-
-#define vrc4173_outb(val,port) outb((val), vrc4173_io_offset+(port))
-#define vrc4173_outw(val,port) outw((val), vrc4173_io_offset+(port))
-#define vrc4173_outl(val,port) outl((val), vrc4173_io_offset+(port))
-#define vrc4173_outb_p(val,port) outb_p((val), vrc4173_io_offset+(port))
-#define vrc4173_outw_p(val,port) outw_p((val), vrc4173_io_offset+(port))
-#define vrc4173_outl_p(val,port) outl_p((val), vrc4173_io_offset+(port))
-
-#define vrc4173_inb(port) inb(vrc4173_io_offset+(port))
-#define vrc4173_inw(port) inw(vrc4173_io_offset+(port))
-#define vrc4173_inl(port) inl(vrc4173_io_offset+(port))
-#define vrc4173_inb_p(port) inb_p(vrc4173_io_offset+(port))
-#define vrc4173_inw_p(port) inw_p(vrc4173_io_offset+(port))
-#define vrc4173_inl_p(port) inl_p(vrc4173_io_offset+(port))
-
-#define vrc4173_outsb(port,addr,count) outsb(vrc4173_io_offset+(port),(addr),(count))
-#define vrc4173_outsw(port,addr,count) outsw(vrc4173_io_offset+(port),(addr),(count))
-#define vrc4173_outsl(port,addr,count) outsl(vrc4173_io_offset+(port),(addr),(count))
-
-#define vrc4173_insb(port,addr,count) insb(vrc4173_io_offset+(port),(addr),(count))
-#define vrc4173_insw(port,addr,count) insw(vrc4173_io_offset+(port),(addr),(count))
-#define vrc4173_insl(port,addr,count) insl(vrc4173_io_offset+(port),(addr),(count))
-
-#else
-
-#define set_vrc4173_io_offset(offset) do {} while (0)
-
-#define vrc4173_outb(val,port) do {} while (0)
-#define vrc4173_outw(val,port) do {} while (0)
-#define vrc4173_outl(val,port) do {} while (0)
-#define vrc4173_outb_p(val,port) do {} while (0)
-#define vrc4173_outw_p(val,port) do {} while (0)
-#define vrc4173_outl_p(val,port) do {} while (0)
-
-#define vrc4173_inb(port) 0
-#define vrc4173_inw(port) 0
-#define vrc4173_inl(port) 0
-#define vrc4173_inb_p(port) 0
-#define vrc4173_inw_p(port) 0
-#define vrc4173_inl_p(port) 0
-
-#define vrc4173_outsb(port,addr,count) do {} while (0)
-#define vrc4173_outsw(port,addr,count) do {} while (0)
-#define vrc4173_outsl(port,addr,count) do {} while (0)
-
-#define vrc4173_insb(port,addr,count) do {} while (0)
-#define vrc4173_insw(port,addr,count) do {} while (0)
-#define vrc4173_insl(port,addr,count) do {} while (0)
-
-#endif
-
-/*
- * Clock Mask Unit
- */
-typedef enum vrc4173_clock {
- VRC4173_PIU_CLOCK,
- VRC4173_KIU_CLOCK,
- VRC4173_AIU_CLOCK,
- VRC4173_PS2_CH1_CLOCK,
- VRC4173_PS2_CH2_CLOCK,
- VRC4173_USBU_PCI_CLOCK,
- VRC4173_CARDU1_PCI_CLOCK,
- VRC4173_CARDU2_PCI_CLOCK,
- VRC4173_AC97U_PCI_CLOCK,
- VRC4173_USBU_48MHz_CLOCK,
- VRC4173_EXT_48MHz_CLOCK,
- VRC4173_48MHz_CLOCK,
-} vrc4173_clock_t;
-
-#ifdef CONFIG_VRC4173
-
-extern void vrc4173_supply_clock(vrc4173_clock_t clock);
-extern void vrc4173_mask_clock(vrc4173_clock_t clock);
-
-#else
-
-static inline void vrc4173_supply_clock(vrc4173_clock_t clock) {}
-static inline void vrc4173_mask_clock(vrc4173_clock_t clock) {}
-
-#endif
-
-/*
- * Interupt Control Unit
- */
-
-#define VRC4173_PIUINT_COMMAND 0x0040
-#define VRC4173_PIUINT_DATA 0x0020
-#define VRC4173_PIUINT_PAGE1 0x0010
-#define VRC4173_PIUINT_PAGE0 0x0008
-#define VRC4173_PIUINT_DATALOST 0x0004
-#define VRC4173_PIUINT_STATUSCHANGE 0x0001
-
-#ifdef CONFIG_VRC4173
-
-extern void vrc4173_enable_piuint(uint16_t mask);
-extern void vrc4173_disable_piuint(uint16_t mask);
-
-#else
-
-static inline void vrc4173_enable_piuint(uint16_t mask) {}
-static inline void vrc4173_disable_piuint(uint16_t mask) {}
-
-#endif
-
-#define VRC4173_AIUINT_INPUT_DMAEND 0x0800
-#define VRC4173_AIUINT_INPUT_DMAHALT 0x0400
-#define VRC4173_AIUINT_INPUT_DATALOST 0x0200
-#define VRC4173_AIUINT_INPUT_DATA 0x0100
-#define VRC4173_AIUINT_OUTPUT_DMAEND 0x0008
-#define VRC4173_AIUINT_OUTPUT_DMAHALT 0x0004
-#define VRC4173_AIUINT_OUTPUT_NODATA 0x0002
-
-#ifdef CONFIG_VRC4173
-
-extern void vrc4173_enable_aiuint(uint16_t mask);
-extern void vrc4173_disable_aiuint(uint16_t mask);
-
-#else
-
-static inline void vrc4173_enable_aiuint(uint16_t mask) {}
-static inline void vrc4173_disable_aiuint(uint16_t mask) {}
-
-#endif
-
-#define VRC4173_KIUINT_DATALOST 0x0004
-#define VRC4173_KIUINT_DATAREADY 0x0002
-#define VRC4173_KIUINT_SCAN 0x0001
-
-#ifdef CONFIG_VRC4173
-
-extern void vrc4173_enable_kiuint(uint16_t mask);
-extern void vrc4173_disable_kiuint(uint16_t mask);
-
-#else
-
-static inline void vrc4173_enable_kiuint(uint16_t mask) {}
-static inline void vrc4173_disable_kiuint(uint16_t mask) {}
-
-#endif
-
-/*
- * General-Purpose I/O Unit
- */
-typedef enum vrc4173_function {
- PS2_CHANNEL1,
- PS2_CHANNEL2,
- TOUCHPANEL,
- KEYBOARD_8SCANLINES,
- KEYBOARD_10SCANLINES,
- KEYBOARD_12SCANLINES,
- GPIO_0_15PINS,
- GPIO_16_20PINS,
-} vrc4173_function_t;
-
-#ifdef CONFIG_VRC4173
-
-extern void vrc4173_select_function(vrc4173_function_t function);
-
-#else
-
-static inline void vrc4173_select_function(vrc4173_function_t function) {}
-
-#endif
-
-#endif /* __NEC_VRC4173_H */
+++ /dev/null
-/*
- * workpad.h, Include file for IBM WorkPad z50.
- *
- * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __IBM_WORKPAD_H
-#define __IBM_WORKPAD_H
-
-#include <asm/addrspace.h>
-#include <asm/vr41xx/vr41xx.h>
-
-/*
- * Board specific address mapping
- */
-#define VR41XX_ISA_MEM_BASE 0x10000000
-#define VR41XX_ISA_MEM_SIZE 0x04000000
-
-/* VR41XX_ISA_IO_BASE includes offset from real base. */
-#define VR41XX_ISA_IO_BASE 0x15000000
-#define VR41XX_ISA_IO_SIZE 0x03000000
-
-#define ISA_BUS_IO_BASE 0
-#define ISA_BUS_IO_SIZE VR41XX_ISA_IO_SIZE
-
-#define IO_PORT_BASE KSEG1ADDR(VR41XX_ISA_IO_BASE)
-#define IO_PORT_RESOURCE_START ISA_BUS_IO_BASE
-#define IO_PORT_RESOURCE_END (ISA_BUS_IO_BASE + ISA_BUS_IO_SIZE - 1)
-
-#endif /* __IBM_WORKPAD_H */
#define read_barrier_depends() do { } while(0)
#define set_mb(var, value) do { var = value; mb(); } while (0)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
-
#ifndef CONFIG_PA20
/* Because kmalloc only guarantees 8-byte alignment for kmalloc'd data,
extern struct backlight_device *pmac_backlight;
extern struct mutex pmac_backlight_mutex;
-extern void pmac_backlight_calc_curve(struct fb_info*);
extern int pmac_backlight_curve_lookup(struct fb_info *info, int value);
extern int pmac_has_backlight_type(const char *type);
-extern void pmac_backlight_key_up(void);
-extern void pmac_backlight_key_down(void);
+extern void pmac_backlight_key(int direction);
+static inline void pmac_backlight_key_up(void)
+{
+ pmac_backlight_key(0);
+}
+static inline void pmac_backlight_key_down(void)
+{
+ pmac_backlight_key(1);
+}
extern int pmac_backlight_set_legacy_brightness(int brightness);
extern int pmac_backlight_get_legacy_brightness(void);
int (*match)(struct irq_host *h, struct device_node *node);
/* Create or update a mapping between a virtual irq number and a hw
- * irq number. This can be called several times for the same mapping
- * but with different flags, though unmap shall always be called
- * before the virq->hw mapping is changed.
+ * irq number. This is called only once for a given mapping.
*/
- int (*map)(struct irq_host *h, unsigned int virq,
- irq_hw_number_t hw, unsigned int flags);
+ int (*map)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
/* Dispose of such a mapping */
void (*unmap)(struct irq_host *h, unsigned int virq);
/* Translate device-tree interrupt specifier from raw format coming
* from the firmware to a irq_hw_number_t (interrupt line number) and
- * trigger flags that can be passed to irq_create_mapping().
- * If no translation is provided, raw format is assumed to be one cell
- * for interrupt line and default sense.
+ * type (sense) that can be passed to set_irq_type(). In the absence
+ * of this callback, irq_create_of_mapping() and irq_of_parse_and_map()
+ * will return the hw number in the first cell and IRQ_TYPE_NONE for
+ * the type (which amount to keeping whatever default value the
+ * interrupt controller has for that line)
*/
int (*xlate)(struct irq_host *h, struct device_node *ctrler,
u32 *intspec, unsigned int intsize,
- irq_hw_number_t *out_hwirq, unsigned int *out_flags);
+ irq_hw_number_t *out_hwirq, unsigned int *out_type);
};
struct irq_host {
* irq_create_mapping - Map a hardware interrupt into linux virq space
* @host: host owning this hardware interrupt or NULL for default host
* @hwirq: hardware irq number in that host space
- * @flags: flags passed to the controller. contains the trigger type among
- * others. Use IRQ_TYPE_* defined in include/linux/irq.h
*
* Only one mapping per hardware interrupt is permitted. Returns a linux
- * virq number. The flags can be used to provide sense information to the
- * controller (typically extracted from the device-tree). If no information
- * is passed, the controller defaults will apply (for example, xics can only
- * do edge so flags are irrelevant for some pseries specific irqs).
- *
- * The device-tree generally contains the trigger info in an encoding that is
- * specific to a given type of controller. In that case, you can directly use
- * host->ops->trigger_xlate() to translate that.
- *
- * It is recommended that new PICs that don't have existing OF bindings chose
- * to use a representation of triggers identical to linux.
+ * virq number.
+ * If the sense/trigger is to be specified, set_irq_type() should be called
+ * on the number returned from that call.
*/
extern unsigned int irq_create_mapping(struct irq_host *host,
- irq_hw_number_t hwirq,
- unsigned int flags);
+ irq_hw_number_t hwirq);
/***
*
* This function is identical to irq_create_mapping except that it takes
* as input informations straight from the device-tree (typically the results
- * of the of_irq_map_*() functions
+ * of the of_irq_map_*() functions.
*/
extern unsigned int irq_create_of_mapping(struct device_node *controller,
u32 *intspec, unsigned int intsize);
#define read_barrier_depends() do { } while(0)
#define set_mb(var, value) do { var = value; mb(); } while (0)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
#ifdef __KERNEL__
#ifdef CONFIG_SMP
#define read_barrier_depends() do { } while(0)
#define set_mb(var, value) do { var = value; mb(); } while (0)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
#ifdef CONFIG_SMP
#define smp_mb() mb()
#ifdef CONFIG_BUG
+static inline __attribute__((noreturn)) void __do_illegal_op(void)
+{
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 3)
+ __builtin_trap();
+#else
+ asm volatile(".long 0");
+#endif
+}
+
#define BUG() do { \
printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
- __builtin_trap(); \
+ __do_illegal_op(); \
} while (0)
#define HAVE_ARCH_BUG
return id;
}
- return 0;
+ return NULL;
}
/* The struct ccw device is our replacement for the globally accessible
extern void clear_all_subchannels(void);
+extern void cio_reset_channel_paths(void);
+
extern void css_schedule_reprobe(void);
#endif
if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
return -EFAULT;
- asm volatile(" cs %1,%4,0(%5)\n"
+ asm volatile(" sacf 256\n"
+ " cs %1,%4,0(%5)\n"
"0: lr %0,%1\n"
- "1:\n"
+ "1: sacf 0\n"
#ifndef __s390x__
".section __ex_table,\"a\"\n"
" .align 4\n"
__flags; \
})
-#define raw_local_save_flags(x) \
- __asm__ __volatile__("stosm 0(%1),0" : "=m" (x) : "a" (&x), "m" (x) )
-
-#define raw_local_irq_restore(x) \
- __asm__ __volatile__("ssm 0(%0)" : : "a" (&x), "m" (x) : "memory")
+#define raw_local_save_flags(x) \
+do { \
+ typecheck(unsigned long, x); \
+ __asm__ __volatile__("stosm 0(%1),0" : "=m" (x) : "a" (&x), "m" (x) ); \
+} while (0)
+
+#define raw_local_irq_restore(x) \
+do { \
+ typecheck(unsigned long, x); \
+ __asm__ __volatile__("ssm 0(%0)" : : "a" (&x), "m" (x) : "memory"); \
+} while (0)
#define raw_irqs_disabled() \
({ \
unsigned long flags; \
- local_save_flags(flags); \
+ raw_local_save_flags(flags); \
!((flags >> __FLAG_SHIFT) & 3); \
})
pte_t *pte = pte_alloc_one_kernel(mm, vmaddr);
if (pte)
return virt_to_page(pte);
- return 0;
+ return NULL;
}
static inline void pte_free_kernel(pte_t *pte)
/*
* Give up the time slice of the virtual PU.
*/
-#ifndef __s390x__
-# define cpu_relax() asm volatile ("diag 0,0,68" : : : "memory")
-#else /* __s390x__ */
-# define cpu_relax() \
- do { \
- if (MACHINE_HAS_DIAG44) \
- asm volatile ("diag 0,0,68" : : : "memory"); \
- } while (0)
-#endif /* __s390x__ */
+static inline void cpu_relax(void)
+{
+ if (MACHINE_HAS_DIAG44)
+ asm volatile ("diag 0,0,68" : : : "memory");
+ else
+ barrier();
+}
/*
* Set PSW to specified value.
#define MACHINE_IS_VM (machine_flags & 1)
#define MACHINE_IS_P390 (machine_flags & 4)
#define MACHINE_HAS_MVPG (machine_flags & 16)
-#define MACHINE_HAS_DIAG44 (machine_flags & 32)
#define MACHINE_HAS_IDTE (machine_flags & 128)
#ifndef __s390x__
#define MACHINE_HAS_IEEE (machine_flags & 2)
#define MACHINE_HAS_CSP (machine_flags & 8)
+#define MACHINE_HAS_DIAG44 (1)
#else /* __s390x__ */
#define MACHINE_HAS_IEEE (1)
#define MACHINE_HAS_CSP (1)
+#define MACHINE_HAS_DIAG44 (machine_flags & 32)
#endif /* __s390x__ */
#define nop() __asm__ __volatile__ ("nop")
-#define xchg(ptr,x) \
- ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(void *)(ptr),sizeof(*(ptr))))
+#define xchg(ptr,x) \
+({ \
+ __typeof__(*(ptr)) __ret; \
+ __ret = (__typeof__(*(ptr))) \
+ __xchg((unsigned long)(x), (void *)(ptr),sizeof(*(ptr))); \
+ __ret; \
+})
static inline unsigned long __xchg(unsigned long x, void * ptr, int size)
{
#define set_mb(var, value) do { var = value; mb(); } while (0)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
#ifdef __s390x__
{
cycles_t cycles;
- __asm__("stck 0(%1)" : "=m" (cycles) : "a" (&cycles) : "cc");
+ __asm__ __volatile__ ("stck 0(%1)" : "=m" (cycles) : "a" (&cycles) : "cc");
return cycles >> 2;
}
{
unsigned long long clk;
- __asm__("stck 0(%1)" : "=m" (clk) : "a" (&clk) : "cc");
+ __asm__ __volatile__ ("stck 0(%1)" : "=m" (clk) : "a" (&clk) : "cc");
return clk;
}
#define __ASM_SH_PROCESSOR_H
#ifdef __KERNEL__
+#include <linux/compiler.h>
#include <asm/page.h>
#include <asm/types.h>
#include <asm/cache.h>
#define KSTK_ESP(tsk) ((tsk)->thread.sp)
#define cpu_sleep() __asm__ __volatile__ ("sleep" : : : "memory")
-#define cpu_relax() do { } while (0)
+#define cpu_relax() barrier()
#endif /* __KERNEL__ */
#endif /* __ASM_SH_PROCESSOR_H */
#endif
#define set_mb(var, value) do { xchg(&var, value); } while (0)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
/* Interrupt Control */
static __inline__ void local_irq_enable(void)
#include <asm/cache.h>
#include <asm/registers.h>
#include <linux/threads.h>
+#include <linux/compiler.h>
/*
* Default implementation of macro that returns current
#define KSTK_EIP(tsk) ((tsk)->thread.pc)
#define KSTK_ESP(tsk) ((tsk)->thread.sp)
-#define cpu_relax() do { } while (0)
+#define cpu_relax() barrier()
#endif /* __ASSEMBLY__ */
#endif /* __ASM_SH64_PROCESSOR_H */
#define set_rmb(var, value) do { xchg(&var, value); } while (0)
#define set_mb(var, value) set_rmb(var, value)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
/* Interrupt Control */
#ifndef HARD_CLI
#define wmb() mb()
#define read_barrier_depends() do { } while(0)
#define set_mb(__var, __value) do { __var = __value; mb(); } while(0)
-#define set_wmb(__var, __value) set_mb(__var, __value)
#define smp_mb() __asm__ __volatile__("":::"memory")
#define smp_rmb() __asm__ __volatile__("":::"memory")
#define smp_wmb() __asm__ __volatile__("":::"memory")
ARCHDEF := defined __sparc__ && defined __arch64__
ALTARCHDEF := defined __sparc__ && !defined __arch64__
-unifdef-y := fbio.h perfctr.h
+unifdef-y += fbio.h perfctr.h
header-y += apb.h asi.h bbc.h bpp.h display7seg.h envctrl.h floppy.h \
ipc.h kdebug.h mostek.h openprom.h openpromio.h parport.h \
pconf.h psrcompat.h pstate.h reg.h uctx.h utrap.h watchdog.h
#define read_barrier_depends() do { } while(0)
#define set_mb(__var, __value) \
do { __var = __value; membar_storeload_storestore(); } while(0)
-#define set_wmb(__var, __value) \
- do { __var = __value; wmb(); } while(0)
#ifdef CONFIG_SMP
#define smp_mb() mb()
#include <linux/thread_info.h>
#endif
+#include <linux/compiler.h>
#include <asm/ptrace.h>
#include <asm/entry.h>
#define KSTK_ESP(task) task_sp (task)
-#define cpu_relax() ((void)0)
+#define cpu_relax() barrier()
#else /* __ASSEMBLY__ */
#define read_barrier_depends() ((void)0)
#define set_rmb(var, value) do { xchg (&var, value); } while (0)
#define set_mb(var, value) set_rmb (var, value)
-#define set_wmb(var, value) do { var = value; wmb (); } while (0)
#define smp_mb() mb ()
#define smp_rmb() rmb ()
/*
* Derived from include/asm-powerpc/iommu.h
*
- * Copyright (C) 2006 Jon Mason <jdmason@us.ibm.com>, IBM Corporation
- * Copyright (C) 2006 Muli Ben-Yehuda <muli@il.ibm.com>, IBM Corporation
+ * Copyright (C) IBM Corporation, 2006
+ *
+ * Author: Jon Mason <jdmason@us.ibm.com>
+ * Author: Muli Ben-Yehuda <muli@il.ibm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#endif
#define read_barrier_depends() do {} while(0)
#define set_mb(var, value) do { (void) xchg(&var, value); } while (0)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
#define warn_if_not_ulong(x) do { unsigned long foo; (void) (&(x) == &foo); } while (0)
/*
- * Copyright (C) 2006 Muli Ben-Yehuda <muli@il.ibm.com>, IBM Corporation
- * Copyright (C) 2006 Jon Mason <jdmason@us.ibm.com>, IBM Corporation
- *
* This file is derived from asm-powerpc/tce.h.
*
+ * Copyright (C) IBM Corporation, 2006
+ *
+ * Author: Muli Ben-Yehuda <muli@il.ibm.com>
+ * Author: Jon Mason <jdmason@us.ibm.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
#include <xtensa/config/tie.h>
#include <xtensa/config/system.h>
+#include <linux/compiler.h>
#include <asm/ptrace.h>
#include <asm/types.h>
#include <asm/coprocessor.h>
#define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc)
#define KSTK_ESP(tsk) (task_pt_regs(tsk)->areg[1])
-#define cpu_relax() do { } while (0)
+#define cpu_relax() barrier()
/* Special register access. */
#endif
#define set_mb(var, value) do { var = value; mb(); } while (0)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
#if !defined (__ASSEMBLY__)
BLK_TC_READ = 1 << 0, /* reads */
BLK_TC_WRITE = 1 << 1, /* writes */
BLK_TC_BARRIER = 1 << 2, /* barrier */
- BLK_TC_SYNC = 1 << 3, /* barrier */
+ BLK_TC_SYNC = 1 << 3, /* sync IO */
BLK_TC_QUEUE = 1 << 4, /* queueing/merging */
BLK_TC_REQUEUE = 1 << 5, /* requeueing */
BLK_TC_ISSUE = 1 << 6, /* issue */
BLK_TC_FS = 1 << 8, /* fs requests */
BLK_TC_PC = 1 << 9, /* pc requests */
BLK_TC_NOTIFY = 1 << 10, /* special message */
+ BLK_TC_AHEAD = 1 << 11, /* readahead */
BLK_TC_END = 1 << 15, /* only 16-bits, reminder */
};
u32 what)
{
struct blk_trace *bt = q->blk_trace;
- int rw = rq->flags & 0x07;
+ int rw = rq->flags & 0x03;
if (likely(!bt))
return;
}
#endif
-extern unsigned long nr_kernel_pages;
+extern unsigned long __meminitdata nr_kernel_pages;
extern unsigned long nr_all_pages;
extern void *__init alloc_large_system_hash(const char *tablename,
#define COMPLETION_INITIALIZER(work) \
{ 0, __WAIT_QUEUE_HEAD_INITIALIZER((work).wait) }
+#define COMPLETION_INITIALIZER_ONSTACK(work) \
+ ({ init_completion(&work); work; })
+
#define DECLARE_COMPLETION(work) \
struct completion work = COMPLETION_INITIALIZER(work)
*/
#ifdef CONFIG_LOCKDEP
# define DECLARE_COMPLETION_ONSTACK(work) \
- struct completion work = ({ init_completion(&work); work; })
+ struct completion work = COMPLETION_INITIALIZER_ONSTACK(work)
#else
# define DECLARE_COMPLETION_ONSTACK(work) DECLARE_COMPLETION(work)
#endif
* to achieve effects such as fast scrolling by changing the origin.
*/
+#include <linux/wait.h>
#include <linux/vt.h>
struct vt_struct;
--- /dev/null
+/* delayacct.h - per-task delay accounting
+ *
+ * Copyright (C) Shailabh Nagar, IBM Corp. 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_DELAYACCT_H
+#define _LINUX_DELAYACCT_H
+
+#include <linux/sched.h>
+#include <linux/taskstats_kern.h>
+
+/*
+ * Per-task flags relevant to delay accounting
+ * maintained privately to avoid exhausting similar flags in sched.h:PF_*
+ * Used to set current->delays->flags
+ */
+#define DELAYACCT_PF_SWAPIN 0x00000001 /* I am doing a swapin */
+
+#ifdef CONFIG_TASK_DELAY_ACCT
+
+extern int delayacct_on; /* Delay accounting turned on/off */
+extern kmem_cache_t *delayacct_cache;
+extern void delayacct_init(void);
+extern void __delayacct_tsk_init(struct task_struct *);
+extern void __delayacct_tsk_exit(struct task_struct *);
+extern void __delayacct_blkio_start(void);
+extern void __delayacct_blkio_end(void);
+extern int __delayacct_add_tsk(struct taskstats *, struct task_struct *);
+extern __u64 __delayacct_blkio_ticks(struct task_struct *);
+
+static inline void delayacct_set_flag(int flag)
+{
+ if (current->delays)
+ current->delays->flags |= flag;
+}
+
+static inline void delayacct_clear_flag(int flag)
+{
+ if (current->delays)
+ current->delays->flags &= ~flag;
+}
+
+static inline void delayacct_tsk_init(struct task_struct *tsk)
+{
+ /* reinitialize in case parent's non-null pointer was dup'ed*/
+ tsk->delays = NULL;
+ if (unlikely(delayacct_on))
+ __delayacct_tsk_init(tsk);
+}
+
+static inline void delayacct_tsk_exit(struct task_struct *tsk)
+{
+ if (tsk->delays)
+ __delayacct_tsk_exit(tsk);
+}
+
+static inline void delayacct_blkio_start(void)
+{
+ if (current->delays)
+ __delayacct_blkio_start();
+}
+
+static inline void delayacct_blkio_end(void)
+{
+ if (current->delays)
+ __delayacct_blkio_end();
+}
+
+static inline int delayacct_add_tsk(struct taskstats *d,
+ struct task_struct *tsk)
+{
+ if (likely(!delayacct_on))
+ return -EINVAL;
+ if (!tsk->delays)
+ return 0;
+ return __delayacct_add_tsk(d, tsk);
+}
+
+static inline __u64 delayacct_blkio_ticks(struct task_struct *tsk)
+{
+ if (tsk->delays)
+ return __delayacct_blkio_ticks(tsk);
+ return 0;
+}
+
+#else
+static inline void delayacct_set_flag(int flag)
+{}
+static inline void delayacct_clear_flag(int flag)
+{}
+static inline void delayacct_init(void)
+{}
+static inline void delayacct_tsk_init(struct task_struct *tsk)
+{}
+static inline void delayacct_tsk_exit(struct task_struct *tsk)
+{}
+static inline void delayacct_blkio_start(void)
+{}
+static inline void delayacct_blkio_end(void)
+{}
+static inline int delayacct_add_tsk(struct taskstats *d,
+ struct task_struct *tsk)
+{ return 0; }
+static inline __u64 delayacct_blkio_ticks(struct task_struct *tsk)
+{ return 0; }
+#endif /* CONFIG_TASK_DELAY_ACCT */
+
+#endif
long pr_instr; /* Current instruction */
#endif
elf_gregset_t pr_reg; /* GP registers */
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+ /* When using FDPIC, the loadmap addresses need to be communicated
+ * to GDB in order for GDB to do the necessary relocations. The
+ * fields (below) used to communicate this information are placed
+ * immediately after ``pr_reg'', so that the loadmap addresses may
+ * be viewed as part of the register set if so desired.
+ */
+ unsigned long pr_exec_fdpic_loadmap;
+ unsigned long pr_interp_fdpic_loadmap;
+#endif
int pr_fpvalid; /* True if math co-processor being used. */
};
#include <linux/fs.h>
#include <linux/init.h>
-#include <linux/tty.h>
#include <linux/device.h>
#include <linux/workqueue.h>
#include <linux/notifier.h>
#define BLOCK_SIZE_BITS 10
#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)
+#define SEEK_SET 0 /* seek relative to beginning of file */
+#define SEEK_CUR 1 /* seek relative to current file position */
+#define SEEK_END 2 /* seek relative to end of file */
+
/* And dynamically-tunable limits and defaults: */
struct files_stat_struct {
int nr_files; /* read only */
int hdlc_open(struct net_device *dev);
/* Must be called by hardware driver when HDLC device is being closed */
void hdlc_close(struct net_device *dev);
-/* Called by hardware driver when DCD line level changes */
-void hdlc_set_carrier(int on, struct net_device *dev);
/* May be used by hardware driver to gain control over HDLC device */
static __inline__ void hdlc_proto_detach(hdlc_device *hdlc)
#define I2C_DRIVERID_BT866 85 /* Conexant bt866 video encoder */
#define I2C_DRIVERID_KS0127 86 /* Samsung ks0127 video decoder */
#define I2C_DRIVERID_TLV320AIC23B 87 /* TI TLV320AIC23B audio codec */
+#define I2C_DRIVERID_ISL1208 88 /* Intersil ISL1208 RTC */
#define I2C_DRIVERID_I2CDEV 900
#define I2C_DRIVERID_ARP 902 /* SMBus ARP Client */
to NULL. If an adapter algorithm can do SMBus access, set
smbus_xfer. If set to NULL, the SMBus protocol is simulated
using common I2C messages */
+ /* master_xfer should return the number of messages successfully
+ processed, or a negative value on error */
int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs,
int num);
int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr,
struct vlan_dev_info;
struct hlist_node;
-#include <linux/proc_fs.h> /* for proc_dir_entry */
#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
#define VLAN_HLEN 4 /* The additional bytes (on top of the Ethernet header)
* that VLAN requires.
* This allows the VLAN to have a different MAC than the underlying
* device, and still route correctly.
*/
- if (!memcmp(eth_hdr(skb)->h_dest, skb->dev->dev_addr, ETH_ALEN))
+ if (!compare_ether_addr(eth_hdr(skb)->h_dest,
+ skb->dev->dev_addr))
skb->pkt_type = PACKET_HOST;
break;
};
extern int request_resource(struct resource *root, struct resource *new);
extern struct resource * ____request_resource(struct resource *root, struct resource *new);
extern int release_resource(struct resource *new);
-extern __deprecated_for_modules int insert_resource(struct resource *parent, struct resource *new);
+extern int insert_resource(struct resource *parent, struct resource *new);
extern int allocate_resource(struct resource *root, struct resource *new,
resource_size_t size, resource_size_t min,
resource_size_t max, resource_size_t align,
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
#define ALIGN(x,a) (((x)+(a)-1)&~((a)-1))
#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f))
+#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
#define KERN_EMERG "<0>" /* system is unusable */
#define KERN_ALERT "<1>" /* action must be taken immediately */
void kthread_bind(struct task_struct *k, unsigned int cpu);
int kthread_stop(struct task_struct *k);
-int kthread_stop_sem(struct task_struct *k, struct semaphore *s);
int kthread_should_stop(void);
#endif /* _LINUX_KTHREAD_H */
list_add_tail(list, head);
}
+/**
+ * list_is_last - tests whether @list is the last entry in list @head
+ * @list: the entry to test
+ * @head: the head of the list
+ */
+static inline int list_is_last(const struct list_head *list,
+ const struct list_head *head)
+{
+ return list->next == head;
+}
+
/**
* list_empty - tests whether a list is empty
* @head: the list to test.
*/
struct lockdep_map {
struct lock_class_key *key;
- struct lock_class *class[MAX_LOCKDEP_SUBCLASSES];
+ struct lock_class *class_cache;
const char *name;
};
# define RTC_VRT 0x80 /* valid RAM and time */
/**********************************************************************/
+#ifndef ARCH_RTC_LOCATION /* Override by <asm/mc146818rtc.h>? */
+
+#define RTC_IO_EXTENT 0x8
+#define RTC_IOMAPPED 1 /* Default to I/O mapping. */
+
+#endif /* ARCH_RTC_LOCATION */
+
#endif /* _MC146818RTC_H */
/* Returns module and fills in value, defined and namebuf, or NULL if
symnum out of range. */
-struct module *module_get_kallsym(unsigned int symnum,
- unsigned long *value,
- char *type,
- char namebuf[128]);
+struct module *module_get_kallsym(unsigned int symnum, unsigned long *value,
+ char *type, char *name, size_t namelen);
/* Look for this name: can be of form module:name. */
unsigned long module_kallsyms_lookup_name(const char *name);
static inline struct module *module_get_kallsym(unsigned int symnum,
unsigned long *value,
- char *type,
- char namebuf[128])
+ char *type, char *name,
+ size_t namelen)
{
return NULL;
}
struct file *file;
};
-enum { MAX_NESTED_LINKS = 5 };
+enum { MAX_NESTED_LINKS = 8 };
struct nameidata {
struct dentry *dentry;
struct net_device *);
struct sk_buff *(*gso_segment)(struct sk_buff *skb,
int features);
+ int (*gso_send_check)(struct sk_buff *skb);
void *af_packet_priv;
struct list_head list;
};
static inline int skb_gso_ok(struct sk_buff *skb, int features)
{
- return net_gso_ok(features, skb_shinfo(skb)->gso_size ?
- skb_shinfo(skb)->gso_type : 0);
+ return net_gso_ok(features, skb_shinfo(skb)->gso_type);
}
static inline int netif_needs_gso(struct net_device *dev, struct sk_buff *skb)
{
- return !skb_gso_ok(skb, dev->features);
+ return skb_is_gso(skb) &&
+ (!skb_gso_ok(skb, dev->features) ||
+ unlikely(skb->ip_summed != CHECKSUM_HW));
}
#endif /* __KERNEL__ */
OP_ILLEGAL = 10044,
};
+/*Defining first and last NFS4 operations implemented.
+Needs to be updated if more operations are defined in future.*/
+
+#define FIRST_NFS4_OP OP_ACCESS
+#define LAST_NFS4_OP OP_RELEASE_LOCKOWNER
+
enum nfsstat4 {
NFS4_OK = 0,
NFS4ERR_PERM = 1,
#ifndef LINUX_NFSD_STATS_H
#define LINUX_NFSD_STATS_H
+#include <linux/nfs4.h>
+
struct nfsd_stats {
unsigned int rchits; /* repcache hits */
unsigned int rcmisses; /* repcache hits */
unsigned int ra_size; /* size of ra cache */
unsigned int ra_depth[11]; /* number of times ra entry was found that deep
* in the cache (10percentiles). [10] = not found */
+#ifdef CONFIG_NFSD_V4
+ unsigned int nfs4_opcount[LAST_NFS4_OP + 1]; /* count of individual nfsv4 operations */
+#endif
+
};
/* thread usage wraps very million seconds (approx one fortnight) */
void (*gpio_dump) (struct nsc_gpio_ops *amp, unsigned iminor);
int (*gpio_get) (unsigned iminor);
void (*gpio_set) (unsigned iminor, int state);
- void (*gpio_set_high)(unsigned iminor);
- void (*gpio_set_low) (unsigned iminor);
void (*gpio_change) (unsigned iminor);
int (*gpio_current) (unsigned iminor);
struct device* dev; /* for dev_dbg() support, set in init */
unsigned int is_enabled:1; /* pci_enable_device has been called */
unsigned int is_busmaster:1; /* device is busmaster */
unsigned int no_msi:1; /* device may not use msi */
+ unsigned int no_d1d2:1; /* only allow d0 or d3 */
unsigned int block_ucfg_access:1; /* userspace config space access is blocked */
unsigned int broken_parity_status:1; /* Device generates false positive parity */
unsigned int msi_enabled:1;
#define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */
#define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */
#define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */
+/* Correctable Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_COR_EN 0x00000001
+/* Non-fatal Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_NONFATAL_EN 0x00000002
+/* Fatal Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_FATAL_EN 0x00000004
#define PCI_ERR_ROOT_STATUS 48
+#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */
+/* Multi ERR_COR Received */
+#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002
+/* ERR_FATAL/NONFATAL Recevied */
+#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004
+/* Multi ERR_FATAL/NONFATAL Recevied */
+#define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008
+#define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /* First Fatal */
+#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */
+#define PCI_ERR_ROOT_FATAL_RCV 0x00000040 /* Fatal Received */
#define PCI_ERR_ROOT_COR_SRC 52
#define PCI_ERR_ROOT_SRC 54
struct pm_dev __deprecated *
pm_register(pm_dev_t type, unsigned long id, pm_callback callback);
-/*
- * Unregister all devices with matching callback
- */
-void __deprecated pm_unregister_all(pm_callback callback);
-
/*
* Send a request to all devices
*/
return NULL;
}
-static inline void pm_unregister_all(pm_callback callback) {}
-
static inline int pm_send_all(pm_request_t rqst, void *data)
{
return 0;
struct mdk_thread_s *thread; /* management thread */
struct mdk_thread_s *sync_thread; /* doing resync or reconstruct */
- sector_t curr_resync; /* blocks scheduled */
+ sector_t curr_resync; /* last block scheduled */
unsigned long resync_mark; /* a recent timestamp */
sector_t resync_mark_cnt;/* blocks written at resync_mark */
+ sector_t curr_mark_cnt; /* blocks scheduled now */
sector_t resync_max_sectors; /* may be set by personality */
#define _ROOT_DEV_H_
#include <linux/major.h>
+#include <linux/types.h>
+#include <linux/kdev_t.h>
enum {
Root_NFS = MKDEV(UNNAMED_MAJOR, 255),
#ifdef CONFIG_DEBUG_LOCK_ALLOC
/*
- * nested locking:
+ * nested locking. NOTE: rwsems are not allowed to recurse
+ * (which occurs if the same task tries to acquire the same
+ * lock instance multiple times), but multiple locks of the
+ * same lock class might be taken, if the order of the locks
+ * is always the same. This ordering rule can be expressed
+ * to lockdep via the _nested() APIs, but enumerating the
+ * subclasses that are used. (If the nesting relationship is
+ * static then another method for expressing nested locking is
+ * the explicit definition of lock class keys and the use of
+ * lockdep_set_class() at lock initialization time.
+ * See Documentation/lockdep-design.txt for more details.)
*/
extern void down_read_nested(struct rw_semaphore *sem, int subclass);
extern void down_write_nested(struct rw_semaphore *sem, int subclass);
/*
- * Take/release a lock when not the owner will release it:
+ * Take/release a lock when not the owner will release it.
+ *
+ * [ This API should be avoided as much as possible - the
+ * proper abstraction for this case is completions. ]
*/
extern void down_read_non_owner(struct rw_semaphore *sem);
extern void up_read_non_owner(struct rw_semaphore *sem);
#ifdef CONFIG_BSD_PROCESS_ACCT
struct pacct_struct pacct; /* per-process accounting information */
#endif
+#ifdef CONFIG_TASKSTATS
+ spinlock_t stats_lock;
+ struct taskstats *stats;
+#endif
};
/* Context switch must be unlocked if interrupts are to be enabled */
struct backing_dev_info;
struct reclaim_state;
-#ifdef CONFIG_SCHEDSTATS
+#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
struct sched_info {
/* cumulative counters */
unsigned long cpu_time, /* time spent on the cpu */
unsigned long last_arrival, /* when we last ran on a cpu */
last_queued; /* when we were last queued to run */
};
+#endif /* defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT) */
+#ifdef CONFIG_SCHEDSTATS
extern struct file_operations proc_schedstat_operations;
+#endif /* CONFIG_SCHEDSTATS */
+
+#ifdef CONFIG_TASK_DELAY_ACCT
+struct task_delay_info {
+ spinlock_t lock;
+ unsigned int flags; /* Private per-task flags */
+
+ /* For each stat XXX, add following, aligned appropriately
+ *
+ * struct timespec XXX_start, XXX_end;
+ * u64 XXX_delay;
+ * u32 XXX_count;
+ *
+ * Atomicity of updates to XXX_delay, XXX_count protected by
+ * single lock above (split into XXX_lock if contention is an issue).
+ */
+
+ /*
+ * XXX_count is incremented on every XXX operation, the delay
+ * associated with the operation is added to XXX_delay.
+ * XXX_delay contains the accumulated delay time in nanoseconds.
+ */
+ struct timespec blkio_start, blkio_end; /* Shared by blkio, swapin */
+ u64 blkio_delay; /* wait for sync block io completion */
+ u64 swapin_delay; /* wait for swapin block io completion */
+ u32 blkio_count; /* total count of the number of sync block */
+ /* io operations performed */
+ u32 swapin_count; /* total count of the number of swapin block */
+ /* io operations performed */
+};
+#endif /* CONFIG_TASK_DELAY_ACCT */
+
+static inline int sched_info_on(void)
+{
+#ifdef CONFIG_SCHEDSTATS
+ return 1;
+#elif defined(CONFIG_TASK_DELAY_ACCT)
+ extern int delayacct_on;
+ return delayacct_on;
+#else
+ return 0;
#endif
+}
enum idle_type
{
cpumask_t cpus_allowed;
unsigned int time_slice, first_time_slice;
-#ifdef CONFIG_SCHEDSTATS
+#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
struct sched_info sched_info;
#endif
* cache last used pipe for splice
*/
struct pipe_inode_info *splice_pipe;
+#ifdef CONFIG_TASK_DELAY_ACCT
+ spinlock_t delays_lock;
+ struct task_delay_info *delays;
+#endif
};
static inline pid_t process_group(struct task_struct *tsk)
#define UPIO_MEM (2)
#define UPIO_MEM32 (3)
#define UPIO_AU (4) /* Au1x00 type IO */
+#define UPIO_TSI (5) /* Tsi108/109 type IO */
unsigned int read_status_mask; /* driver specific */
unsigned int ignore_status_mask; /* driver specific */
{ }
#endif
+static inline int skb_is_gso(const struct sk_buff *skb)
+{
+ return skb_shinfo(skb)->gso_size;
+}
+
#endif /* __KERNEL__ */
#endif /* _LINUX_SKBUFF_H */
--- /dev/null
+/* taskstats.h - exporting per-task statistics
+ *
+ * Copyright (C) Shailabh Nagar, IBM Corp. 2006
+ * (C) Balbir Singh, IBM Corp. 2006
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _LINUX_TASKSTATS_H
+#define _LINUX_TASKSTATS_H
+
+/* Format for per-task data returned to userland when
+ * - a task exits
+ * - listener requests stats for a task
+ *
+ * The struct is versioned. Newer versions should only add fields to
+ * the bottom of the struct to maintain backward compatibility.
+ *
+ *
+ * To add new fields
+ * a) bump up TASKSTATS_VERSION
+ * b) add comment indicating new version number at end of struct
+ * c) add new fields after version comment; maintain 64-bit alignment
+ */
+
+#define TASKSTATS_VERSION 1
+
+struct taskstats {
+
+ /* Version 1 */
+ __u16 version;
+ __u16 padding[3]; /* Userspace should not interpret the padding
+ * field which can be replaced by useful
+ * fields if struct taskstats is extended.
+ */
+
+ /* Delay accounting fields start
+ *
+ * All values, until comment "Delay accounting fields end" are
+ * available only if delay accounting is enabled, even though the last
+ * few fields are not delays
+ *
+ * xxx_count is the number of delay values recorded
+ * xxx_delay_total is the corresponding cumulative delay in nanoseconds
+ *
+ * xxx_delay_total wraps around to zero on overflow
+ * xxx_count incremented regardless of overflow
+ */
+
+ /* Delay waiting for cpu, while runnable
+ * count, delay_total NOT updated atomically
+ */
+ __u64 cpu_count;
+ __u64 cpu_delay_total;
+
+ /* Following four fields atomically updated using task->delays->lock */
+
+ /* Delay waiting for synchronous block I/O to complete
+ * does not account for delays in I/O submission
+ */
+ __u64 blkio_count;
+ __u64 blkio_delay_total;
+
+ /* Delay waiting for page fault I/O (swap in only) */
+ __u64 swapin_count;
+ __u64 swapin_delay_total;
+
+ /* cpu "wall-clock" running time
+ * On some architectures, value will adjust for cpu time stolen
+ * from the kernel in involuntary waits due to virtualization.
+ * Value is cumulative, in nanoseconds, without a corresponding count
+ * and wraps around to zero silently on overflow
+ */
+ __u64 cpu_run_real_total;
+
+ /* cpu "virtual" running time
+ * Uses time intervals seen by the kernel i.e. no adjustment
+ * for kernel's involuntary waits due to virtualization.
+ * Value is cumulative, in nanoseconds, without a corresponding count
+ * and wraps around to zero silently on overflow
+ */
+ __u64 cpu_run_virtual_total;
+ /* Delay accounting fields end */
+ /* version 1 ends here */
+};
+
+
+/*
+ * Commands sent from userspace
+ * Not versioned. New commands should only be inserted at the enum's end
+ * prior to __TASKSTATS_CMD_MAX
+ */
+
+enum {
+ TASKSTATS_CMD_UNSPEC = 0, /* Reserved */
+ TASKSTATS_CMD_GET, /* user->kernel request/get-response */
+ TASKSTATS_CMD_NEW, /* kernel->user event */
+ __TASKSTATS_CMD_MAX,
+};
+
+#define TASKSTATS_CMD_MAX (__TASKSTATS_CMD_MAX - 1)
+
+enum {
+ TASKSTATS_TYPE_UNSPEC = 0, /* Reserved */
+ TASKSTATS_TYPE_PID, /* Process id */
+ TASKSTATS_TYPE_TGID, /* Thread group id */
+ TASKSTATS_TYPE_STATS, /* taskstats structure */
+ TASKSTATS_TYPE_AGGR_PID, /* contains pid + stats */
+ TASKSTATS_TYPE_AGGR_TGID, /* contains tgid + stats */
+ __TASKSTATS_TYPE_MAX,
+};
+
+#define TASKSTATS_TYPE_MAX (__TASKSTATS_TYPE_MAX - 1)
+
+enum {
+ TASKSTATS_CMD_ATTR_UNSPEC = 0,
+ TASKSTATS_CMD_ATTR_PID,
+ TASKSTATS_CMD_ATTR_TGID,
+ TASKSTATS_CMD_ATTR_REGISTER_CPUMASK,
+ TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK,
+ __TASKSTATS_CMD_ATTR_MAX,
+};
+
+#define TASKSTATS_CMD_ATTR_MAX (__TASKSTATS_CMD_ATTR_MAX - 1)
+
+/* NETLINK_GENERIC related info */
+
+#define TASKSTATS_GENL_NAME "TASKSTATS"
+#define TASKSTATS_GENL_VERSION 0x1
+
+#endif /* _LINUX_TASKSTATS_H */
--- /dev/null
+/* taskstats_kern.h - kernel header for per-task statistics interface
+ *
+ * Copyright (C) Shailabh Nagar, IBM Corp. 2006
+ * (C) Balbir Singh, IBM Corp. 2006
+ */
+
+#ifndef _LINUX_TASKSTATS_KERN_H
+#define _LINUX_TASKSTATS_KERN_H
+
+#include <linux/taskstats.h>
+#include <linux/sched.h>
+#include <net/genetlink.h>
+
+#ifdef CONFIG_TASKSTATS
+extern kmem_cache_t *taskstats_cache;
+extern struct mutex taskstats_exit_mutex;
+
+static inline void taskstats_exit_free(struct taskstats *tidstats)
+{
+ if (tidstats)
+ kmem_cache_free(taskstats_cache, tidstats);
+}
+
+static inline void taskstats_tgid_init(struct signal_struct *sig)
+{
+ spin_lock_init(&sig->stats_lock);
+ sig->stats = NULL;
+}
+
+static inline void taskstats_tgid_alloc(struct signal_struct *sig)
+{
+ struct taskstats *stats;
+ unsigned long flags;
+
+ stats = kmem_cache_zalloc(taskstats_cache, SLAB_KERNEL);
+ if (!stats)
+ return;
+
+ spin_lock_irqsave(&sig->stats_lock, flags);
+ if (!sig->stats) {
+ sig->stats = stats;
+ stats = NULL;
+ }
+ spin_unlock_irqrestore(&sig->stats_lock, flags);
+
+ if (stats)
+ kmem_cache_free(taskstats_cache, stats);
+}
+
+static inline void taskstats_tgid_free(struct signal_struct *sig)
+{
+ struct taskstats *stats = NULL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sig->stats_lock, flags);
+ if (sig->stats) {
+ stats = sig->stats;
+ sig->stats = NULL;
+ }
+ spin_unlock_irqrestore(&sig->stats_lock, flags);
+ if (stats)
+ kmem_cache_free(taskstats_cache, stats);
+}
+
+extern void taskstats_exit_alloc(struct taskstats **, unsigned int *);
+extern void taskstats_exit_send(struct task_struct *, struct taskstats *, int, unsigned int);
+extern void taskstats_init_early(void);
+extern void taskstats_tgid_alloc(struct signal_struct *);
+#else
+static inline void taskstats_exit_alloc(struct taskstats **ptidstats, unsigned int *mycpu)
+{}
+static inline void taskstats_exit_free(struct taskstats *ptidstats)
+{}
+static inline void taskstats_exit_send(struct task_struct *tsk,
+ struct taskstats *tidstats,
+ int group_dead, unsigned int cpu)
+{}
+static inline void taskstats_tgid_init(struct signal_struct *sig)
+{}
+static inline void taskstats_tgid_alloc(struct signal_struct *sig)
+{}
+static inline void taskstats_tgid_free(struct signal_struct *sig)
+{}
+static inline void taskstats_init_early(void)
+{}
+#endif /* CONFIG_TASKSTATS */
+
+#endif
+
extern void set_normalized_timespec(struct timespec *ts, time_t sec, long nsec);
+/*
+ * sub = lhs - rhs, in normalized form
+ */
+static inline struct timespec timespec_sub(struct timespec lhs,
+ struct timespec rhs)
+{
+ struct timespec ts_delta;
+ set_normalized_timespec(&ts_delta, lhs.tv_sec - rhs.tv_sec,
+ lhs.tv_nsec - rhs.tv_nsec);
+ return ts_delta;
+}
+
/*
* Returns true if the timespec is norm, false if denorm:
*/
* 'tty.h' defines some structures used by tty_io.c and some defines.
*/
-/*
- * These constants are also useful for user-level apps (e.g., VC
- * resizing).
- */
-#define MIN_NR_CONSOLES 1 /* must be at least 1 */
-#define MAX_NR_CONSOLES 63 /* serial lines start at 64 */
-#define MAX_NR_USER_CONSOLES 63 /* must be root to allocate above this */
- /* Note: the ioctl VT_GETSTATE does not work for
- consoles 16 and higher (since it returns a short) */
-
#ifdef __KERNEL__
#include <linux/fs.h>
#include <linux/major.h>
#include <linux/workqueue.h>
#include <linux/tty_driver.h>
#include <linux/tty_ldisc.h>
-#include <linux/screen_info.h>
#include <linux/mutex.h>
#include <asm/system.h>
extern void tty_write_flush(struct tty_struct *);
extern struct termios tty_std_termios;
-extern int fg_console, last_console, want_console;
extern int kmsg_redirect;
* @urb_list: urbs queued to this endpoint; maintained by usbcore
* @hcpriv: for use by HCD; typically holds hardware dma queue head (QH)
* with one or more transfer descriptors (TDs) per urb
- * @kobj: kobject for sysfs info
+ * @ep_dev: ep_device for sysfs info
* @extra: descriptors following this endpoint in the configuration
* @extralen: how many bytes of "extra" are valid
*
--- /dev/null
+/*
+ * USB Serial Converter stuff
+ *
+ * Copyright (C) 1999 - 2005
+ * Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ */
+
+
+#ifndef __LINUX_USB_SERIAL_H
+#define __LINUX_USB_SERIAL_H
+
+#include <linux/kref.h>
+#include <linux/mutex.h>
+
+#define SERIAL_TTY_MAJOR 188 /* Nice legal number now */
+#define SERIAL_TTY_MINORS 255 /* loads of devices :) */
+
+#define MAX_NUM_PORTS 8 /* The maximum number of ports one device can grab at once */
+
+/* parity check flag */
+#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+/**
+ * usb_serial_port: structure for the specific ports of a device.
+ * @serial: pointer back to the struct usb_serial owner of this port.
+ * @tty: pointer to the corresponding tty for this port.
+ * @lock: spinlock to grab when updating portions of this structure.
+ * @mutex: mutex used to synchronize serial_open() and serial_close()
+ * access for this port.
+ * @number: the number of the port (the minor number).
+ * @interrupt_in_buffer: pointer to the interrupt in buffer for this port.
+ * @interrupt_in_urb: pointer to the interrupt in struct urb for this port.
+ * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe
+ * for this port.
+ * @interrupt_out_buffer: pointer to the interrupt out buffer for this port.
+ * @interrupt_out_size: the size of the interrupt_out_buffer, in bytes.
+ * @interrupt_out_urb: pointer to the interrupt out struct urb for this port.
+ * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe
+ * for this port.
+ * @bulk_in_buffer: pointer to the bulk in buffer for this port.
+ * @read_urb: pointer to the bulk in struct urb for this port.
+ * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this
+ * port.
+ * @bulk_out_buffer: pointer to the bulk out buffer for this port.
+ * @bulk_out_size: the size of the bulk_out_buffer, in bytes.
+ * @write_urb: pointer to the bulk out struct urb for this port.
+ * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this
+ * port.
+ * @write_wait: a wait_queue_head_t used by the port.
+ * @work: work queue entry for the line discipline waking up.
+ * @open_count: number of times this port has been opened.
+ *
+ * This structure is used by the usb-serial core and drivers for the specific
+ * ports of a device.
+ */
+struct usb_serial_port {
+ struct usb_serial * serial;
+ struct tty_struct * tty;
+ spinlock_t lock;
+ struct mutex mutex;
+ unsigned char number;
+
+ unsigned char * interrupt_in_buffer;
+ struct urb * interrupt_in_urb;
+ __u8 interrupt_in_endpointAddress;
+
+ unsigned char * interrupt_out_buffer;
+ int interrupt_out_size;
+ struct urb * interrupt_out_urb;
+ __u8 interrupt_out_endpointAddress;
+
+ unsigned char * bulk_in_buffer;
+ int bulk_in_size;
+ struct urb * read_urb;
+ __u8 bulk_in_endpointAddress;
+
+ unsigned char * bulk_out_buffer;
+ int bulk_out_size;
+ struct urb * write_urb;
+ int write_urb_busy;
+ __u8 bulk_out_endpointAddress;
+
+ wait_queue_head_t write_wait;
+ struct work_struct work;
+ int open_count;
+ struct device dev;
+};
+#define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev)
+
+/* get and set the port private data pointer helper functions */
+static inline void *usb_get_serial_port_data (struct usb_serial_port *port)
+{
+ return dev_get_drvdata(&port->dev);
+}
+
+static inline void usb_set_serial_port_data (struct usb_serial_port *port, void *data)
+{
+ dev_set_drvdata(&port->dev, data);
+}
+
+/**
+ * usb_serial - structure used by the usb-serial core for a device
+ * @dev: pointer to the struct usb_device for this device
+ * @type: pointer to the struct usb_serial_driver for this device
+ * @interface: pointer to the struct usb_interface for this device
+ * @minor: the starting minor number for this device
+ * @num_ports: the number of ports this device has
+ * @num_interrupt_in: number of interrupt in endpoints we have
+ * @num_interrupt_out: number of interrupt out endpoints we have
+ * @num_bulk_in: number of bulk in endpoints we have
+ * @num_bulk_out: number of bulk out endpoints we have
+ * @port: array of struct usb_serial_port structures for the different ports.
+ * @private: place to put any driver specific information that is needed. The
+ * usb-serial driver is required to manage this data, the usb-serial core
+ * will not touch this. Use usb_get_serial_data() and
+ * usb_set_serial_data() to access this.
+ */
+struct usb_serial {
+ struct usb_device * dev;
+ struct usb_serial_driver * type;
+ struct usb_interface * interface;
+ unsigned char minor;
+ unsigned char num_ports;
+ unsigned char num_port_pointers;
+ char num_interrupt_in;
+ char num_interrupt_out;
+ char num_bulk_in;
+ char num_bulk_out;
+ struct usb_serial_port * port[MAX_NUM_PORTS];
+ struct kref kref;
+ void * private;
+};
+#define to_usb_serial(d) container_of(d, struct usb_serial, kref)
+
+#define NUM_DONT_CARE (-1)
+
+/* get and set the serial private data pointer helper functions */
+static inline void *usb_get_serial_data (struct usb_serial *serial)
+{
+ return serial->private;
+}
+
+static inline void usb_set_serial_data (struct usb_serial *serial, void *data)
+{
+ serial->private = data;
+}
+
+/**
+ * usb_serial_driver - describes a usb serial driver
+ * @description: pointer to a string that describes this driver. This string used
+ * in the syslog messages when a device is inserted or removed.
+ * @id_table: pointer to a list of usb_device_id structures that define all
+ * of the devices this structure can support.
+ * @num_interrupt_in: the number of interrupt in endpoints this device will
+ * have.
+ * @num_interrupt_out: the number of interrupt out endpoints this device will
+ * have.
+ * @num_bulk_in: the number of bulk in endpoints this device will have.
+ * @num_bulk_out: the number of bulk out endpoints this device will have.
+ * @num_ports: the number of different ports this device will have.
+ * @calc_num_ports: pointer to a function to determine how many ports this
+ * device has dynamically. It will be called after the probe()
+ * callback is called, but before attach()
+ * @probe: pointer to the driver's probe function.
+ * This will be called when the device is inserted into the system,
+ * but before the device has been fully initialized by the usb_serial
+ * subsystem. Use this function to download any firmware to the device,
+ * or any other early initialization that might be needed.
+ * Return 0 to continue on with the initialization sequence. Anything
+ * else will abort it.
+ * @attach: pointer to the driver's attach function.
+ * This will be called when the struct usb_serial structure is fully set
+ * set up. Do any local initialization of the device, or any private
+ * memory structure allocation at this point in time.
+ * @shutdown: pointer to the driver's shutdown function. This will be
+ * called when the device is removed from the system.
+ *
+ * This structure is defines a USB Serial driver. It provides all of
+ * the information that the USB serial core code needs. If the function
+ * pointers are defined, then the USB serial core code will call them when
+ * the corresponding tty port functions are called. If they are not
+ * called, the generic serial function will be used instead.
+ *
+ * The driver.owner field should be set to the module owner of this driver.
+ * The driver.name field should be set to the name of this driver (remember
+ * it will show up in sysfs, so it needs to be short and to the point.
+ * Useing the module name is a good idea.)
+ */
+struct usb_serial_driver {
+ const char *description;
+ const struct usb_device_id *id_table;
+ char num_interrupt_in;
+ char num_interrupt_out;
+ char num_bulk_in;
+ char num_bulk_out;
+ char num_ports;
+
+ struct list_head driver_list;
+ struct device_driver driver;
+
+ int (*probe) (struct usb_serial *serial, const struct usb_device_id *id);
+ int (*attach) (struct usb_serial *serial);
+ int (*calc_num_ports) (struct usb_serial *serial);
+
+ void (*shutdown) (struct usb_serial *serial);
+
+ int (*port_probe) (struct usb_serial_port *port);
+ int (*port_remove) (struct usb_serial_port *port);
+
+ /* serial function calls */
+ int (*open) (struct usb_serial_port *port, struct file * filp);
+ void (*close) (struct usb_serial_port *port, struct file * filp);
+ int (*write) (struct usb_serial_port *port, const unsigned char *buf, int count);
+ int (*write_room) (struct usb_serial_port *port);
+ int (*ioctl) (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
+ void (*set_termios) (struct usb_serial_port *port, struct termios * old);
+ void (*break_ctl) (struct usb_serial_port *port, int break_state);
+ int (*chars_in_buffer) (struct usb_serial_port *port);
+ void (*throttle) (struct usb_serial_port *port);
+ void (*unthrottle) (struct usb_serial_port *port);
+ int (*tiocmget) (struct usb_serial_port *port, struct file *file);
+ int (*tiocmset) (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
+
+ void (*read_int_callback)(struct urb *urb, struct pt_regs *regs);
+ void (*write_int_callback)(struct urb *urb, struct pt_regs *regs);
+ void (*read_bulk_callback)(struct urb *urb, struct pt_regs *regs);
+ void (*write_bulk_callback)(struct urb *urb, struct pt_regs *regs);
+};
+#define to_usb_serial_driver(d) container_of(d, struct usb_serial_driver, driver)
+
+extern int usb_serial_register(struct usb_serial_driver *driver);
+extern void usb_serial_deregister(struct usb_serial_driver *driver);
+extern void usb_serial_port_softint(struct usb_serial_port *port);
+
+extern int usb_serial_probe(struct usb_interface *iface, const struct usb_device_id *id);
+extern void usb_serial_disconnect(struct usb_interface *iface);
+
+extern int ezusb_writememory (struct usb_serial *serial, int address, unsigned char *data, int length, __u8 bRequest);
+extern int ezusb_set_reset (struct usb_serial *serial, unsigned char reset_bit);
+
+/* USB Serial console functions */
+#ifdef CONFIG_USB_SERIAL_CONSOLE
+extern void usb_serial_console_init (int debug, int minor);
+extern void usb_serial_console_exit (void);
+extern void usb_serial_console_disconnect(struct usb_serial *serial);
+#else
+static inline void usb_serial_console_init (int debug, int minor) { }
+static inline void usb_serial_console_exit (void) { }
+static inline void usb_serial_console_disconnect(struct usb_serial *serial) {}
+#endif
+
+/* Functions needed by other parts of the usbserial core */
+extern struct usb_serial *usb_serial_get_by_index (unsigned int minor);
+extern void usb_serial_put(struct usb_serial *serial);
+extern int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp);
+extern int usb_serial_generic_write (struct usb_serial_port *port, const unsigned char *buf, int count);
+extern void usb_serial_generic_close (struct usb_serial_port *port, struct file *filp);
+extern int usb_serial_generic_write_room (struct usb_serial_port *port);
+extern int usb_serial_generic_chars_in_buffer (struct usb_serial_port *port);
+extern void usb_serial_generic_read_bulk_callback (struct urb *urb, struct pt_regs *regs);
+extern void usb_serial_generic_write_bulk_callback (struct urb *urb, struct pt_regs *regs);
+extern void usb_serial_generic_shutdown (struct usb_serial *serial);
+extern int usb_serial_generic_register (int debug);
+extern void usb_serial_generic_deregister (void);
+
+extern int usb_serial_bus_register (struct usb_serial_driver *device);
+extern void usb_serial_bus_deregister (struct usb_serial_driver *device);
+
+extern struct usb_serial_driver usb_serial_generic_device;
+extern struct bus_type usb_serial_bus_type;
+extern struct tty_driver *usb_serial_tty_driver;
+
+static inline void usb_serial_debug_data(int debug,
+ struct device *dev,
+ const char *function, int size,
+ const unsigned char *data)
+{
+ int i;
+
+ if (debug) {
+ dev_printk(KERN_DEBUG, dev, "%s - length = %d, data = ", function, size);
+ for (i = 0; i < size; ++i)
+ printk ("%.2x ", data[i]);
+ printk ("\n");
+ }
+}
+
+/* Use our own dbg macro */
+#undef dbg
+#define dbg(format, arg...) do { if (debug) printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , ## arg); } while (0)
+
+
+
+#endif /* ifdef __LINUX_USB_SERIAL_H */
+
#define USB_RECIP_INTERFACE 0x01
#define USB_RECIP_ENDPOINT 0x02
#define USB_RECIP_OTHER 0x03
+/* From Wireless USB 1.0 */
+#define USB_RECIP_PORT 0x04
+#define USB_RECIP_RPIPE 0x05
/*
* Standard requests, for the bRequest field of a SETUP packet.
#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */
#define USB_REQ_GET_ENCRYPTION 0x0E
+#define USB_REQ_RPIPE_ABORT 0x0E
#define USB_REQ_SET_HANDSHAKE 0x0F
+#define USB_REQ_RPIPE_RESET 0x0F
#define USB_REQ_GET_HANDSHAKE 0x10
#define USB_REQ_SET_CONNECTION 0x11
#define USB_REQ_SET_SECURITY_DATA 0x12
#define USB_DT_BOS 0x0f
#define USB_DT_DEVICE_CAPABILITY 0x10
#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11
+#define USB_DT_WIRE_ADAPTER 0x21
+#define USB_DT_RPIPE 0x22
/* conventional codes for class-specific descriptors */
#define USB_DT_CS_DEVICE 0x21
/* utility wrapping a simple endpoint selection policy */
extern struct usb_ep *usb_ep_autoconfig (struct usb_gadget *,
- struct usb_endpoint_descriptor *) __init;
+ struct usb_endpoint_descriptor *) __devinit;
-extern void usb_ep_autoconfig_reset (struct usb_gadget *) __init;
+extern void usb_ep_autoconfig_reset (struct usb_gadget *) __devinit;
#endif /* __KERNEL__ */
/* Need delay after Command phase */ \
US_FLAG(NO_WP_DETECT, 0x00000200) \
/* Don't check for write-protect */ \
+ US_FLAG(MAX_SECTORS_64, 0x00000400) \
+ /* Sets max_sectors to 64 */
#define US_FLAG(name, value) US_FL_##name = value ,
enum { US_DO_ALL_FLAGS };
#define VM_ALLOC 0x00000002 /* vmalloc() */
#define VM_MAP 0x00000004 /* vmap()ed pages */
#define VM_USERMAP 0x00000008 /* suitable for remap_vmalloc_range */
+#define VM_VPAGES 0x00000010 /* buffer for pages was vmalloc'ed */
/* bits [20..32] reserved for arch specific ioremap internals */
/*
static inline void count_vm_events(enum vm_event_item item, long delta)
{
- get_cpu_var(vm_event_states.event[item])++;
+ get_cpu_var(vm_event_states.event[item]) += delta;
put_cpu();
}
zone_page_state_add(delta, zone, item);
}
+static inline void __inc_zone_state(struct zone *zone, enum zone_stat_item item)
+{
+ atomic_long_inc(&zone->vm_stat[item]);
+ atomic_long_inc(&vm_stat[item]);
+}
+
static inline void __inc_zone_page_state(struct page *page,
enum zone_stat_item item)
{
- atomic_long_inc(&page_zone(page)->vm_stat[item]);
- atomic_long_inc(&vm_stat[item]);
+ __inc_zone_state(page_zone(page), item);
}
static inline void __dec_zone_page_state(struct page *page,
#ifndef _LINUX_VT_H
#define _LINUX_VT_H
+/*
+ * These constants are also useful for user-level apps (e.g., VC
+ * resizing).
+ */
+#define MIN_NR_CONSOLES 1 /* must be at least 1 */
+#define MAX_NR_CONSOLES 63 /* serial lines start at 64 */
+#define MAX_NR_USER_CONSOLES 63 /* must be root to allocate above this */
+ /* Note: the ioctl VT_GETSTATE does not work for
+ consoles 16 and higher (since it returns a short) */
+
/* 0x56 is 'V', to avoid collision with termios and kd */
#define VT_OPENQRY 0x5600 /* find available vt */
extern void kd_mksound(unsigned int hz, unsigned int ticks);
extern int kbd_rate(struct kbd_repeat *rep);
+extern int fg_console, last_console, want_console;
/* console.c */
#define __WAIT_BIT_KEY_INITIALIZER(word, bit) \
{ .flags = word, .bit_nr = bit, }
-/*
- * lockdep: we want one lock-class for all waitqueue locks.
- */
-extern struct lock_class_key waitqueue_lock_key;
-
-static inline void init_waitqueue_head(wait_queue_head_t *q)
-{
- spin_lock_init(&q->lock);
- lockdep_set_class(&q->lock, &waitqueue_lock_key);
- INIT_LIST_HEAD(&q->task_list);
-}
+extern void init_waitqueue_head(wait_queue_head_t *q);
static inline void init_waitqueue_entry(wait_queue_t *q, struct task_struct *p)
{
return nlmsg_unicast(genl_sock, skb, pid);
}
+/**
+ * gennlmsg_data - head of message payload
+ * @gnlh: genetlink messsage header
+ */
+static inline void *genlmsg_data(const struct genlmsghdr *gnlh)
+{
+ return ((unsigned char *) gnlh + GENL_HDRLEN);
+}
+
+/**
+ * genlmsg_len - length of message payload
+ * @gnlh: genetlink message header
+ */
+static inline int genlmsg_len(const struct genlmsghdr *gnlh)
+{
+ struct nlmsghdr *nlh = (struct nlmsghdr *)((unsigned char *)gnlh -
+ NLMSG_HDRLEN);
+ return (nlh->nlmsg_len - GENL_HDRLEN - NLMSG_HDRLEN);
+}
+
#endif /* __NET_GENERIC_NETLINK_H */
struct net_protocol {
int (*handler)(struct sk_buff *skb);
void (*err_handler)(struct sk_buff *skb, u32 info);
+ int (*gso_send_check)(struct sk_buff *skb);
struct sk_buff *(*gso_segment)(struct sk_buff *skb,
int features);
int no_policy;
int type, int code, int offset,
__u32 info);
+ int (*gso_send_check)(struct sk_buff *skb);
struct sk_buff *(*gso_segment)(struct sk_buff *skb,
int features);
extern int tcp_v4_destroy_sock(struct sock *sk);
+extern int tcp_v4_gso_send_check(struct sk_buff *skb);
extern struct sk_buff *tcp_tso_segment(struct sk_buff *skb, int features);
#ifdef CONFIG_PROC_FS
dev_addr->broadcast[9] = (unsigned char) pkey;
}
-static inline union ib_gid *ib_addr_get_sgid(struct rdma_dev_addr *dev_addr)
+static inline void ib_addr_get_sgid(struct rdma_dev_addr *dev_addr,
+ union ib_gid *gid)
{
- return (union ib_gid *) (dev_addr->src_dev_addr + 4);
+ memcpy(gid, dev_addr->src_dev_addr + 4, sizeof *gid);
}
static inline void ib_addr_set_sgid(struct rdma_dev_addr *dev_addr,
memcpy(dev_addr->src_dev_addr + 4, gid, sizeof *gid);
}
-static inline union ib_gid *ib_addr_get_dgid(struct rdma_dev_addr *dev_addr)
+static inline void ib_addr_get_dgid(struct rdma_dev_addr *dev_addr,
+ union ib_gid *gid)
{
- return (union ib_gid *) (dev_addr->dst_dev_addr + 4);
+ memcpy(gid, dev_addr->dst_dev_addr + 4, sizeof *gid);
}
static inline void ib_addr_set_dgid(struct rdma_dev_addr *dev_addr,
struct ib_pool_fmr *ib_fmr_pool_map_phys(struct ib_fmr_pool *pool_handle,
u64 *page_list,
int list_len,
- u64 *io_virtual_address);
+ u64 io_virtual_address);
int ib_fmr_pool_unmap(struct ib_pool_fmr *fmr);
int device; /* device number */
const struct file_operations *f_ops; /* file operations */
void *private_data; /* private data for f_ops->open */
- char name[0]; /* device name (keep at the end of
- structure) */
};
/* sound.c */
int acpi_port;
struct snd_kcontrol *eapd_switch; /* for amplifier hack */
int accept_valid; /* accept mmap valid (for OSS) */
+ int in_suspend;
struct gameport *gameport;
--- /dev/null
+#ifndef __MBX_FB_H
+#define __MBX_FB_H
+
+struct mbxfb_val {
+ unsigned int defval;
+ unsigned int min;
+ unsigned int max;
+};
+
+struct fb_info;
+
+struct mbxfb_platform_data {
+ /* Screen info */
+ struct mbxfb_val xres;
+ struct mbxfb_val yres;
+ struct mbxfb_val bpp;
+
+ /* Memory info */
+ unsigned long memsize; /* if 0 use ODFB? */
+ unsigned long timings1;
+ unsigned long timings2;
+ unsigned long timings3;
+
+ int (*probe)(struct fb_info *fb);
+ int (*remove)(struct fb_info *fb);
+};
+
+#endif /* __MBX_FB_H */
for processing it. A preliminary version of these tools is available
at <http://www.physik3.uni-rostock.de/tim/kernel/utils/acct/>.
+config TASKSTATS
+ bool "Export task/process statistics through netlink (EXPERIMENTAL)"
+ depends on NET
+ default n
+ help
+ Export selected statistics for tasks/processes through the
+ generic netlink interface. Unlike BSD process accounting, the
+ statistics are available during the lifetime of tasks/processes as
+ responses to commands. Like BSD accounting, they are sent to user
+ space on task exit.
+
+ Say N if unsure.
+
+config TASK_DELAY_ACCT
+ bool "Enable per-task delay accounting (EXPERIMENTAL)"
+ depends on TASKSTATS
+ help
+ Collect information on time spent by a task waiting for system
+ resources like cpu, synchronous block I/O completion and swapping
+ in pages. Such statistics can help in setting a task's priorities
+ relative to other tasks for cpu, io, rss limits etc.
+
+ Say N if unsure.
+
config SYSCTL
bool "Sysctl support" if EMBEDDED
default y
#include <linux/cpu.h>
#include <linux/cpuset.h>
#include <linux/efi.h>
+#include <linux/taskstats_kern.h>
+#include <linux/delayacct.h>
#include <linux/unistd.h>
#include <linux/rmap.h>
#include <linux/mempolicy.h>
proc_root_init();
#endif
cpuset_init();
+ taskstats_init_early();
+ delayacct_init();
check_bugs();
obj-$(CONFIG_SECCOMP) += seccomp.o
obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o
obj-$(CONFIG_RELAY) += relay.o
+obj-$(CONFIG_TASK_DELAY_ACCT) += delayacct.o
+obj-$(CONFIG_TASKSTATS) += taskstats.o
ifneq ($(CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER),y)
# According to Alan Modra <alan@linuxcare.com.au>, the -fno-omit-frame-pointer is
old_encode_dev(tty_devnum(current->signal->tty)) : 0;
read_unlock(&tasklist_lock);
- spin_lock(¤t->sighand->siglock);
+ spin_lock_irq(¤t->sighand->siglock);
ac.ac_utime = encode_comp_t(jiffies_to_AHZ(cputime_to_jiffies(pacct->ac_utime)));
ac.ac_stime = encode_comp_t(jiffies_to_AHZ(cputime_to_jiffies(pacct->ac_stime)));
ac.ac_flag = pacct->ac_flag;
ac.ac_minflt = encode_comp_t(pacct->ac_minflt);
ac.ac_majflt = encode_comp_t(pacct->ac_majflt);
ac.ac_exitcode = pacct->ac_exitcode;
- spin_unlock(¤t->sighand->siglock);
+ spin_unlock_irq(¤t->sighand->siglock);
ac.ac_io = encode_comp_t(0 /* current->io_usage */); /* %% */
ac.ac_rw = encode_comp_t(ac.ac_io / 1024);
ac.ac_swaps = encode_comp_t(0);
--- /dev/null
+/* delayacct.c - per-task delay accounting
+ *
+ * Copyright (C) Shailabh Nagar, IBM Corp. 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include <linux/sysctl.h>
+#include <linux/delayacct.h>
+
+int delayacct_on __read_mostly; /* Delay accounting turned on/off */
+kmem_cache_t *delayacct_cache;
+
+static int __init delayacct_setup_enable(char *str)
+{
+ delayacct_on = 1;
+ return 1;
+}
+__setup("delayacct", delayacct_setup_enable);
+
+void delayacct_init(void)
+{
+ delayacct_cache = kmem_cache_create("delayacct_cache",
+ sizeof(struct task_delay_info),
+ 0,
+ SLAB_PANIC,
+ NULL, NULL);
+ delayacct_tsk_init(&init_task);
+}
+
+void __delayacct_tsk_init(struct task_struct *tsk)
+{
+ spin_lock_init(&tsk->delays_lock);
+ /* No need to acquire tsk->delays_lock for allocation here unless
+ __delayacct_tsk_init called after tsk is attached to tasklist
+ */
+ tsk->delays = kmem_cache_zalloc(delayacct_cache, SLAB_KERNEL);
+ if (tsk->delays)
+ spin_lock_init(&tsk->delays->lock);
+}
+
+void __delayacct_tsk_exit(struct task_struct *tsk)
+{
+ struct task_delay_info *delays = tsk->delays;
+ spin_lock(&tsk->delays_lock);
+ tsk->delays = NULL;
+ spin_unlock(&tsk->delays_lock);
+ kmem_cache_free(delayacct_cache, delays);
+}
+
+/*
+ * Start accounting for a delay statistic using
+ * its starting timestamp (@start)
+ */
+
+static inline void delayacct_start(struct timespec *start)
+{
+ do_posix_clock_monotonic_gettime(start);
+}
+
+/*
+ * Finish delay accounting for a statistic using
+ * its timestamps (@start, @end), accumalator (@total) and @count
+ */
+
+static void delayacct_end(struct timespec *start, struct timespec *end,
+ u64 *total, u32 *count)
+{
+ struct timespec ts;
+ s64 ns;
+
+ do_posix_clock_monotonic_gettime(end);
+ ts = timespec_sub(*end, *start);
+ ns = timespec_to_ns(&ts);
+ if (ns < 0)
+ return;
+
+ spin_lock(¤t->delays->lock);
+ *total += ns;
+ (*count)++;
+ spin_unlock(¤t->delays->lock);
+}
+
+void __delayacct_blkio_start(void)
+{
+ delayacct_start(¤t->delays->blkio_start);
+}
+
+void __delayacct_blkio_end(void)
+{
+ if (current->delays->flags & DELAYACCT_PF_SWAPIN)
+ /* Swapin block I/O */
+ delayacct_end(¤t->delays->blkio_start,
+ ¤t->delays->blkio_end,
+ ¤t->delays->swapin_delay,
+ ¤t->delays->swapin_count);
+ else /* Other block I/O */
+ delayacct_end(¤t->delays->blkio_start,
+ ¤t->delays->blkio_end,
+ ¤t->delays->blkio_delay,
+ ¤t->delays->blkio_count);
+}
+
+int __delayacct_add_tsk(struct taskstats *d, struct task_struct *tsk)
+{
+ s64 tmp;
+ struct timespec ts;
+ unsigned long t1,t2,t3;
+
+ spin_lock(&tsk->delays_lock);
+
+ /* Though tsk->delays accessed later, early exit avoids
+ * unnecessary returning of other data
+ */
+ if (!tsk->delays)
+ goto done;
+
+ tmp = (s64)d->cpu_run_real_total;
+ cputime_to_timespec(tsk->utime + tsk->stime, &ts);
+ tmp += timespec_to_ns(&ts);
+ d->cpu_run_real_total = (tmp < (s64)d->cpu_run_real_total) ? 0 : tmp;
+
+ /*
+ * No locking available for sched_info (and too expensive to add one)
+ * Mitigate by taking snapshot of values
+ */
+ t1 = tsk->sched_info.pcnt;
+ t2 = tsk->sched_info.run_delay;
+ t3 = tsk->sched_info.cpu_time;
+
+ d->cpu_count += t1;
+
+ jiffies_to_timespec(t2, &ts);
+ tmp = (s64)d->cpu_delay_total + timespec_to_ns(&ts);
+ d->cpu_delay_total = (tmp < (s64)d->cpu_delay_total) ? 0 : tmp;
+
+ tmp = (s64)d->cpu_run_virtual_total + (s64)jiffies_to_usecs(t3) * 1000;
+ d->cpu_run_virtual_total =
+ (tmp < (s64)d->cpu_run_virtual_total) ? 0 : tmp;
+
+ /* zero XXX_total, non-zero XXX_count implies XXX stat overflowed */
+
+ spin_lock(&tsk->delays->lock);
+ tmp = d->blkio_delay_total + tsk->delays->blkio_delay;
+ d->blkio_delay_total = (tmp < d->blkio_delay_total) ? 0 : tmp;
+ tmp = d->swapin_delay_total + tsk->delays->swapin_delay;
+ d->swapin_delay_total = (tmp < d->swapin_delay_total) ? 0 : tmp;
+ d->blkio_count += tsk->delays->blkio_count;
+ d->swapin_count += tsk->delays->swapin_count;
+ spin_unlock(&tsk->delays->lock);
+
+done:
+ spin_unlock(&tsk->delays_lock);
+ return 0;
+}
+
+__u64 __delayacct_blkio_ticks(struct task_struct *tsk)
+{
+ __u64 ret;
+
+ spin_lock(&tsk->delays->lock);
+ ret = nsec_to_clock_t(tsk->delays->blkio_delay +
+ tsk->delays->swapin_delay);
+ spin_unlock(&tsk->delays->lock);
+ return ret;
+}
+
#include <linux/mount.h>
#include <linux/proc_fs.h>
#include <linux/mempolicy.h>
+#include <linux/taskstats_kern.h>
+#include <linux/delayacct.h>
#include <linux/cpuset.h>
#include <linux/syscalls.h>
#include <linux/signal.h>
fastcall NORET_TYPE void do_exit(long code)
{
struct task_struct *tsk = current;
+ struct taskstats *tidstats;
int group_dead;
+ unsigned int mycpu;
profile_task_exit(tsk);
current->comm, current->pid,
preempt_count());
+ taskstats_exit_alloc(&tidstats, &mycpu);
+
acct_update_integrals(tsk);
if (tsk->mm) {
update_hiwater_rss(tsk->mm);
#endif
if (unlikely(tsk->audit_context))
audit_free(tsk);
+ taskstats_exit_send(tsk, tidstats, group_dead, mycpu);
+ taskstats_exit_free(tidstats);
+ delayacct_tsk_exit(tsk);
+
exit_mm(tsk);
if (group_dead)
#include <linux/rmap.h>
#include <linux/acct.h>
#include <linux/cn_proc.h>
+#include <linux/delayacct.h>
+#include <linux/taskstats_kern.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
DEFINE_PER_CPU(unsigned long, process_counts) = 0;
- __cacheline_aligned DEFINE_RWLOCK(tasklist_lock); /* outer */
-
-EXPORT_SYMBOL(tasklist_lock);
+__cacheline_aligned DEFINE_RWLOCK(tasklist_lock); /* outer */
int nr_processes(void)
{
if (clone_flags & CLONE_THREAD) {
atomic_inc(¤t->signal->count);
atomic_inc(¤t->signal->live);
+ taskstats_tgid_alloc(current->signal);
return 0;
}
sig = kmem_cache_alloc(signal_cachep, GFP_KERNEL);
INIT_LIST_HEAD(&sig->cpu_timers[0]);
INIT_LIST_HEAD(&sig->cpu_timers[1]);
INIT_LIST_HEAD(&sig->cpu_timers[2]);
+ taskstats_tgid_init(sig);
task_lock(current->group_leader);
memcpy(sig->rlim, current->signal->rlim, sizeof sig->rlim);
void __cleanup_signal(struct signal_struct *sig)
{
exit_thread_group_keys(sig);
+ taskstats_tgid_free(sig);
kmem_cache_free(signal_cachep, sig);
}
goto bad_fork_cleanup_put_domain;
p->did_exec = 0;
+ delayacct_tsk_init(p); /* Must remain after dup_task_struct() */
copy_flags(clone_flags, p);
p->pid = pid;
retval = -EFAULT;
* the refcount and return its pi_state:
*/
pi_state = this->pi_state;
+ /*
+ * Userspace might have messed up non PI and PI futexes
+ */
+ if (unlikely(!pi_state))
+ return -EINVAL;
+
atomic_inc(&pi_state->refcount);
me->pi_state = pi_state;
static int get_ksymbol_mod(struct kallsym_iter *iter)
{
iter->owner = module_get_kallsym(iter->pos - kallsyms_num_syms,
- &iter->value,
- &iter->type, iter->name);
+ &iter->value, &iter->type,
+ iter->name, sizeof(iter->name));
if (iter->owner == NULL)
return 0;
* was never called.
*/
int kthread_stop(struct task_struct *k)
-{
- return kthread_stop_sem(k, NULL);
-}
-EXPORT_SYMBOL(kthread_stop);
-
-/**
- * kthread_stop_sem - stop a thread created by kthread_create().
- * @k: thread created by kthread_create().
- * @s: semaphore that @k waits on while idle.
- *
- * Does essentially the same thing as kthread_stop() above, but wakes
- * @k by calling up(@s).
- *
- * Returns the result of threadfn(), or %-EINTR if wake_up_process()
- * was never called.
- */
-int kthread_stop_sem(struct task_struct *k, struct semaphore *s)
{
int ret;
/* Now set kthread_should_stop() to true, and wake it up. */
kthread_stop_info.k = k;
- if (s)
- up(s);
- else
- wake_up_process(k);
+ wake_up_process(k);
put_task_struct(k);
/* Once it dies, reset stop ptr, gather result and we're done. */
return ret;
}
-EXPORT_SYMBOL(kthread_stop_sem);
+EXPORT_SYMBOL(kthread_stop);
static __init int helper_init(void)
{
*/
static int class_filter(struct lock_class *class)
{
+#if 0
+ /* Example */
if (class->name_version == 1 &&
- !strcmp(class->name, "&rl->lock"))
+ !strcmp(class->name, "lockname"))
return 1;
if (class->name_version == 1 &&
- !strcmp(class->name, "&ni->mrec_lock"))
+ !strcmp(class->name, "&struct->lockfield"))
return 1;
- if (class->name_version == 1 &&
- !strcmp(class->name, "mft_ni_runlist_lock"))
- return 1;
- if (class->name_version == 1 &&
- !strcmp(class->name, "mft_ni_mrec_lock"))
- return 1;
- if (class->name_version == 1 &&
- !strcmp(class->name, "&vol->lcnbmp_lock"))
- return 1;
- return 0;
+#endif
+ /* Allow everything else. 0 would be filter everything else */
+ return 1;
}
#endif
print_lock(curr->held_locks + i);
}
}
-/*
- * Helper to print a nice hierarchy of lock dependencies:
- */
-static void print_spaces(int nr)
-{
- int i;
-
- for (i = 0; i < nr; i++)
- printk(" ");
-}
static void print_lock_class_header(struct lock_class *class, int depth)
{
int bit;
- print_spaces(depth);
- printk("->");
+ printk("%*s->", depth, "");
print_lock_name(class);
printk(" ops: %lu", class->ops);
printk(" {\n");
if (class->usage_mask & (1 << bit)) {
int len = depth;
- print_spaces(depth);
- len += printk(" %s", usage_str[bit]);
+ len += printk("%*s %s", depth, "", usage_str[bit]);
len += printk(" at:\n");
print_stack_trace(class->usage_traces + bit, len);
}
}
- print_spaces(depth);
- printk(" }\n");
+ printk("%*s }\n", depth, "");
- print_spaces(depth);
- printk(" ... key at: ");
+ printk("%*s ... key at: ",depth,"");
print_ip_sym((unsigned long)class->key);
}
DEBUG_LOCKS_WARN_ON(!entry->class);
print_lock_dependencies(entry->class, depth + 1);
- print_spaces(depth);
- printk(" ... acquired at:\n");
+ printk("%*s ... acquired at:\n",depth,"");
print_stack_trace(&entry->trace, 2);
printk("\n");
}
* itself, so actual lookup of the hash should be once per lock object.
*/
static inline struct lock_class *
-register_lock_class(struct lockdep_map *lock, unsigned int subclass)
+look_up_lock_class(struct lockdep_map *lock, unsigned int subclass)
{
struct lockdep_subclass_key *key;
struct list_head *hash_head;
*/
list_for_each_entry(class, hash_head, hash_entry)
if (class->key == key)
- goto out_set;
+ return class;
+
+ return NULL;
+}
+
+/*
+ * Register a lock's class in the hash-table, if the class is not present
+ * yet. Otherwise we look it up. We cache the result in the lock object
+ * itself, so actual lookup of the hash should be once per lock object.
+ */
+static inline struct lock_class *
+register_lock_class(struct lockdep_map *lock, unsigned int subclass)
+{
+ struct lockdep_subclass_key *key;
+ struct list_head *hash_head;
+ struct lock_class *class;
+
+ class = look_up_lock_class(lock, subclass);
+ if (likely(class))
+ return class;
/*
* Debug-check: all keys must be persistent!
return NULL;
}
+ key = lock->key->subkeys + subclass;
+ hash_head = classhashentry(key);
+
__raw_spin_lock(&hash_lock);
/*
* We have to do the hash-walk again, to avoid races
out_unlock_set:
__raw_spin_unlock(&hash_lock);
-out_set:
- lock->class[subclass] = class;
+ if (!subclass)
+ lock->class_cache = class;
DEBUG_LOCKS_WARN_ON(class->subclass != subclass);
}
lock->name = name;
lock->key = key;
- memset(lock->class, 0, sizeof(lock->class[0])*MAX_LOCKDEP_SUBCLASSES);
+ lock->class_cache = NULL;
}
EXPORT_SYMBOL_GPL(lockdep_init_map);
unsigned long ip)
{
struct task_struct *curr = current;
+ struct lock_class *class = NULL;
struct held_lock *hlock;
- struct lock_class *class;
unsigned int depth, id;
int chain_head = 0;
u64 chain_key;
return 0;
}
- class = lock->class[subclass];
- /* not cached yet? */
+ if (!subclass)
+ class = lock->class_cache;
+ /*
+ * Not cached yet or subclass?
+ */
if (unlikely(!class)) {
class = register_lock_class(lock, subclass);
if (!class)
void lockdep_reset_lock(struct lockdep_map *lock)
{
- struct lock_class *class, *next, *entry;
+ struct lock_class *class, *next;
struct list_head *head;
unsigned long flags;
int i, j;
raw_local_irq_save(flags);
- __raw_spin_lock(&hash_lock);
/*
- * Remove all classes this lock has:
+ * Remove all classes this lock might have:
+ */
+ for (j = 0; j < MAX_LOCKDEP_SUBCLASSES; j++) {
+ /*
+ * If the class exists we look it up and zap it:
+ */
+ class = look_up_lock_class(lock, j);
+ if (class)
+ zap_class(class);
+ }
+ /*
+ * Debug check: in the end all mapped classes should
+ * be gone.
*/
+ __raw_spin_lock(&hash_lock);
for (i = 0; i < CLASSHASH_SIZE; i++) {
head = classhash_table + i;
if (list_empty(head))
continue;
list_for_each_entry_safe(class, next, head, hash_entry) {
- for (j = 0; j < MAX_LOCKDEP_SUBCLASSES; j++) {
- entry = lock->class[j];
- if (class == entry) {
- zap_class(class);
- lock->class[j] = NULL;
- break;
- }
+ if (unlikely(class == lock->class_cache)) {
+ __raw_spin_unlock(&hash_lock);
+ DEBUG_LOCKS_WARN_ON(1);
+ goto out_restore;
}
}
}
-
- /*
- * Debug check: in the end all mapped classes should
- * be gone.
- */
- for (j = 0; j < MAX_LOCKDEP_SUBCLASSES; j++) {
- entry = lock->class[j];
- if (!entry)
- continue;
- __raw_spin_unlock(&hash_lock);
- DEBUG_LOCKS_WARN_ON(1);
- raw_local_irq_restore(flags);
- return;
- }
-
__raw_spin_unlock(&hash_lock);
+
+out_restore:
raw_local_irq_restore(flags);
}
static void
print_freed_lock_bug(struct task_struct *curr, const void *mem_from,
- const void *mem_to)
+ const void *mem_to, struct held_lock *hlock)
{
if (!debug_locks_off())
return;
printk( "-------------------------\n");
printk("%s/%d is freeing memory %p-%p, with a lock still held there!\n",
curr->comm, curr->pid, mem_from, mem_to-1);
+ print_lock(hlock);
lockdep_print_held_locks(curr);
printk("\nstack backtrace:\n");
!in_range(mem_from, lock_to, mem_to))
continue;
- print_freed_lock_bug(curr, mem_from, mem_to);
+ print_freed_lock_bug(curr, mem_from, mem_to, hlock);
break;
}
local_irq_restore(flags);
return NULL;
}
-struct module *module_get_kallsym(unsigned int symnum,
- unsigned long *value,
- char *type,
- char namebuf[128])
+struct module *module_get_kallsym(unsigned int symnum, unsigned long *value,
+ char *type, char *name, size_t namelen)
{
struct module *mod;
if (symnum < mod->num_symtab) {
*value = mod->symtab[symnum].st_value;
*type = mod->symtab[symnum].st_info;
- strncpy(namebuf,
- mod->strtab + mod->symtab[symnum].st_name,
- 127);
+ strlcpy(name, mod->strtab + mod->symtab[symnum].st_name,
+ namelen);
mutex_unlock(&module_mutex);
return mod;
}
void add_taint(unsigned flag)
{
+ debug_locks_off(); /* can't trust the integrity of the kernel anymore */
tainted |= flag;
}
EXPORT_SYMBOL(add_taint);
*/
void oops_enter(void)
{
+ debug_locks_off(); /* can't trust the integrity of the kernel anymore */
do_oops_enter_exit();
}
return dev;
}
-static void __pm_unregister(struct pm_dev *dev)
-{
- if (dev) {
- list_del(&dev->entry);
- kfree(dev);
- }
-}
-
-/**
- * pm_unregister_all - unregister all devices with matching callback
- * @callback: callback function pointer
- *
- * Unregister every device that would call the callback passed. This
- * is primarily meant as a helper function for loadable modules. It
- * enables a module to give up all its managed devices without keeping
- * its own private list.
- */
-
-void pm_unregister_all(pm_callback callback)
-{
- struct list_head *entry;
-
- if (!callback)
- return;
-
- mutex_lock(&pm_devs_lock);
- entry = pm_devs.next;
- while (entry != &pm_devs) {
- struct pm_dev *dev = list_entry(entry, struct pm_dev, entry);
- entry = entry->next;
- if (dev->callback == callback)
- __pm_unregister(dev);
- }
- mutex_unlock(&pm_devs_lock);
-}
-
/**
* pm_send - send request to a single device
* @dev: device to send to
}
EXPORT_SYMBOL(pm_register);
-EXPORT_SYMBOL(pm_unregister_all);
EXPORT_SYMBOL(pm_send_all);
EXPORT_SYMBOL(pm_active);
for (zone_pfn = 0; zone_pfn < zone->spanned_pages; ++zone_pfn) {
if (saveable(zone, &zone_pfn)) {
struct page *page;
+ long *src, *dst;
+ int n;
+
page = pfn_to_page(zone_pfn + zone->zone_start_pfn);
BUG_ON(!pbe);
pbe->orig_address = (unsigned long)page_address(page);
- /* copy_page is not usable for copying task structs. */
- memcpy((void *)pbe->address, (void *)pbe->orig_address, PAGE_SIZE);
+ /* copy_page and memcpy are not usable for copying task structs. */
+ dst = (long *)pbe->address;
+ src = (long *)pbe->orig_address;
+ for (n = PAGE_SIZE / sizeof(long); n; n--)
+ *dst++ = *src++;
pbe = pbe->next;
}
}
struct swap_map_handle handle;
struct snapshot_handle snapshot;
struct swsusp_info *header;
- unsigned long start;
int error;
if ((error = swsusp_swap_check())) {
}
error = get_swap_writer(&handle);
if (!error) {
- start = handle.cur_swap;
+ unsigned long start = handle.cur_swap;
error = swap_write_page(&handle, header);
- }
- if (!error)
- error = save_image(&handle, &snapshot, header->pages - 1);
- if (!error) {
- flush_swap_writer(&handle);
- printk("S");
- error = mark_swapfiles(swp_entry(root_swap, start));
- printk("|\n");
+ if (!error)
+ error = save_image(&handle, &snapshot,
+ header->pages - 1);
+ if (!error) {
+ flush_swap_writer(&handle);
+ printk("S");
+ error = mark_swapfiles(swp_entry(root_swap, start));
+ printk("|\n");
+ }
}
if (error)
free_all_swap_pages(root_swap, handle.bitmap);
static int end_io(struct bio *bio, unsigned int num, int err)
{
- if (!test_bit(BIO_UPTODATE, &bio->bi_flags))
- panic("I/O error reading memory image");
+ if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) {
+ printk(KERN_ERR "I/O error reading swsusp image.\n");
+ return -EIO;
+ }
atomic_set(&io_done, 0);
return 0;
}
DEFAULT_CONSOLE_LOGLEVEL, /* default_console_loglevel */
};
-EXPORT_SYMBOL(console_printk);
+EXPORT_UNUSED_SYMBOL(console_printk); /* June 2006 */
/*
* Low lever drivers may need that to know if they can schedule in
{
return console_locked;
}
-EXPORT_SYMBOL(is_console_locked);
+EXPORT_UNUSED_SYMBOL(is_console_locked); /* June 2006 */
/**
* release_console_sem - unlock the console system
return result;
}
-EXPORT_SYMBOL(insert_resource);
-
/*
* Given an existing resource, change its start and size to match the
* arguments. Returns -EBUSY if it can't fit. Existing children of
/* Wait for the next command to be executed */
schedule();
+ try_to_freeze();
if (signal_pending(current))
flush_signals(current);
#include <linux/times.h>
#include <linux/acct.h>
#include <linux/kprobes.h>
+#include <linux/delayacct.h>
#include <asm/tlb.h>
#include <asm/unistd.h>
.release = single_release,
};
+/*
+ * Expects runqueue lock to be held for atomicity of update
+ */
+static inline void
+rq_sched_info_arrive(struct rq *rq, unsigned long delta_jiffies)
+{
+ if (rq) {
+ rq->rq_sched_info.run_delay += delta_jiffies;
+ rq->rq_sched_info.pcnt++;
+ }
+}
+
+/*
+ * Expects runqueue lock to be held for atomicity of update
+ */
+static inline void
+rq_sched_info_depart(struct rq *rq, unsigned long delta_jiffies)
+{
+ if (rq)
+ rq->rq_sched_info.cpu_time += delta_jiffies;
+}
# define schedstat_inc(rq, field) do { (rq)->field++; } while (0)
# define schedstat_add(rq, field, amt) do { (rq)->field += (amt); } while (0)
#else /* !CONFIG_SCHEDSTATS */
+static inline void
+rq_sched_info_arrive(struct rq *rq, unsigned long delta_jiffies)
+{}
+static inline void
+rq_sched_info_depart(struct rq *rq, unsigned long delta_jiffies)
+{}
# define schedstat_inc(rq, field) do { } while (0)
# define schedstat_add(rq, field, amt) do { } while (0)
#endif
return rq;
}
-#ifdef CONFIG_SCHEDSTATS
+#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
/*
* Called when a process is dequeued from the active array and given
* the cpu. We should note that with the exception of interactive
*/
static void sched_info_arrive(struct task_struct *t)
{
- unsigned long now = jiffies, diff = 0;
- struct rq *rq = task_rq(t);
+ unsigned long now = jiffies, delta_jiffies = 0;
if (t->sched_info.last_queued)
- diff = now - t->sched_info.last_queued;
+ delta_jiffies = now - t->sched_info.last_queued;
sched_info_dequeued(t);
- t->sched_info.run_delay += diff;
+ t->sched_info.run_delay += delta_jiffies;
t->sched_info.last_arrival = now;
t->sched_info.pcnt++;
- if (!rq)
- return;
-
- rq->rq_sched_info.run_delay += diff;
- rq->rq_sched_info.pcnt++;
+ rq_sched_info_arrive(task_rq(t), delta_jiffies);
}
/*
*/
static inline void sched_info_queued(struct task_struct *t)
{
- if (!t->sched_info.last_queued)
- t->sched_info.last_queued = jiffies;
+ if (unlikely(sched_info_on()))
+ if (!t->sched_info.last_queued)
+ t->sched_info.last_queued = jiffies;
}
/*
*/
static inline void sched_info_depart(struct task_struct *t)
{
- struct rq *rq = task_rq(t);
- unsigned long diff = jiffies - t->sched_info.last_arrival;
+ unsigned long delta_jiffies = jiffies - t->sched_info.last_arrival;
- t->sched_info.cpu_time += diff;
-
- if (rq)
- rq->rq_sched_info.cpu_time += diff;
+ t->sched_info.cpu_time += delta_jiffies;
+ rq_sched_info_depart(task_rq(t), delta_jiffies);
}
/*
* the idle task.) We are only called when prev != next.
*/
static inline void
-sched_info_switch(struct task_struct *prev, struct task_struct *next)
+__sched_info_switch(struct task_struct *prev, struct task_struct *next)
{
struct rq *rq = task_rq(prev);
if (next != rq->idle)
sched_info_arrive(next);
}
+static inline void
+sched_info_switch(struct task_struct *prev, struct task_struct *next)
+{
+ if (unlikely(sched_info_on()))
+ __sched_info_switch(prev, next);
+}
#else
#define sched_info_queued(t) do { } while (0)
#define sched_info_switch(t, next) do { } while (0)
-#endif /* CONFIG_SCHEDSTATS */
+#endif /* CONFIG_SCHEDSTATS || CONFIG_TASK_DELAY_ACCT */
/*
* Adding/removing a task to/from a priority array:
INIT_LIST_HEAD(&p->run_list);
p->array = NULL;
-#ifdef CONFIG_SCHEDSTATS
- memset(&p->sched_info, 0, sizeof(p->sched_info));
+#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
+ if (unlikely(sched_info_on()))
+ memset(&p->sched_info, 0, sizeof(p->sched_info));
#endif
#if defined(CONFIG_SMP) && defined(__ARCH_WANT_UNLOCKED_CTXSW)
p->oncpu = 0;
WARN_ON(rq->prev_mm);
rq->prev_mm = oldmm;
}
+ /*
+ * Since the runqueue lock will be released by the next
+ * task (which is an invalid locking op but in the case
+ * of the scheduler it's an obvious special-case), so we
+ * do an early lockdep release here:
+ */
+#ifndef __ARCH_WANT_UNLOCKED_CTXSW
spin_release(&rq->lock.dep_map, 1, _THIS_IP_);
+#endif
/* Here we just switch the register state and the stack. */
switch_to(prev, next, prev);
#ifdef CONFIG_PREEMPT
/*
- * this is is the entry point to schedule() from in-kernel preemption
+ * this is the entry point to schedule() from in-kernel preemption
* off of preempt_enable. Kernel preemptions off return from interrupt
* occur there and call schedule directly.
*/
EXPORT_SYMBOL(preempt_schedule);
/*
- * this is is the entry point to schedule() from kernel preemption
+ * this is the entry point to schedule() from kernel preemption
* off of irq context.
* Note, that this is called and return with irqs disabled. This will
* protect us against recursive calling from irq.
struct task_struct *task = current;
int saved_lock_depth;
#endif
- /* Catch callers which need to be fixed*/
+ /* Catch callers which need to be fixed */
BUG_ON(ti->preempt_count || !irqs_disabled());
need_resched:
{
struct rq *rq = &__raw_get_cpu_var(runqueues);
+ delayacct_blkio_start();
atomic_inc(&rq->nr_iowait);
schedule();
atomic_dec(&rq->nr_iowait);
+ delayacct_blkio_end();
}
EXPORT_SYMBOL(io_schedule);
struct rq *rq = &__raw_get_cpu_var(runqueues);
long ret;
+ delayacct_blkio_start();
atomic_inc(&rq->nr_iowait);
ret = schedule_timeout(timeout);
atomic_dec(&rq->nr_iowait);
+ delayacct_blkio_end();
return ret;
}
return list_entry(p->sibling.next,struct task_struct,sibling);
}
-static const char *stat_nam[] = { "R", "S", "D", "T", "t", "Z", "X" };
+static const char stat_nam[] = "RSDTtZX";
static void show_task(struct task_struct *p)
{
unsigned long free = 0;
unsigned state;
- printk("%-13.13s ", p->comm);
state = p->state ? __ffs(p->state) + 1 : 0;
- if (state < ARRAY_SIZE(stat_nam))
- printk(stat_nam[state]);
- else
- printk("?");
+ printk("%-13.13s %c", p->comm,
+ state < sizeof(stat_nam) - 1 ? stat_nam[state] : '?');
#if (BITS_PER_LONG == 32)
if (state == TASK_RUNNING)
printk(" running ");
p->timestamp = p->timestamp - rq_src->timestamp_last_tick
+ rq_dest->timestamp_last_tick;
deactivate_task(p, rq_src);
- activate_task(p, rq_dest, 0);
+ __activate_task(p, rq_dest);
if (TASK_PREEMPTS_CURR(p, rq_dest))
resched_task(rq_dest->curr);
}
cache = vmalloc(max_size);
if (!cache) {
printk("could not vmalloc %d bytes for cache!\n", 2*max_size);
- return 1000000; // return 1 msec on very small boxen
+ return 1000000; /* return 1 msec on very small boxen */
}
while (size <= max_size) {
softirq_vec[nr].action = action;
}
-EXPORT_SYMBOL(open_softirq);
-
/* Tasklets */
struct tasklet_head
{
error = current->mm->dumpable;
break;
case PR_SET_DUMPABLE:
- if (arg2 < 0 || arg2 > 2) {
+ if (arg2 < 0 || arg2 > 1) {
error = -EINVAL;
break;
}
--- /dev/null
+/*
+ * taskstats.c - Export per-task statistics to userland
+ *
+ * Copyright (C) Shailabh Nagar, IBM Corp. 2006
+ * (C) Balbir Singh, IBM Corp. 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/taskstats_kern.h>
+#include <linux/delayacct.h>
+#include <linux/cpumask.h>
+#include <linux/percpu.h>
+#include <net/genetlink.h>
+#include <asm/atomic.h>
+
+/*
+ * Maximum length of a cpumask that can be specified in
+ * the TASKSTATS_CMD_ATTR_REGISTER/DEREGISTER_CPUMASK attribute
+ */
+#define TASKSTATS_CPUMASK_MAXLEN (100+6*NR_CPUS)
+
+static DEFINE_PER_CPU(__u32, taskstats_seqnum) = { 0 };
+static int family_registered;
+kmem_cache_t *taskstats_cache;
+
+static struct genl_family family = {
+ .id = GENL_ID_GENERATE,
+ .name = TASKSTATS_GENL_NAME,
+ .version = TASKSTATS_GENL_VERSION,
+ .maxattr = TASKSTATS_CMD_ATTR_MAX,
+};
+
+static struct nla_policy taskstats_cmd_get_policy[TASKSTATS_CMD_ATTR_MAX+1]
+__read_mostly = {
+ [TASKSTATS_CMD_ATTR_PID] = { .type = NLA_U32 },
+ [TASKSTATS_CMD_ATTR_TGID] = { .type = NLA_U32 },
+ [TASKSTATS_CMD_ATTR_REGISTER_CPUMASK] = { .type = NLA_STRING },
+ [TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK] = { .type = NLA_STRING },};
+
+struct listener {
+ struct list_head list;
+ pid_t pid;
+ char valid;
+};
+
+struct listener_list {
+ struct rw_semaphore sem;
+ struct list_head list;
+};
+static DEFINE_PER_CPU(struct listener_list, listener_array);
+
+enum actions {
+ REGISTER,
+ DEREGISTER,
+ CPU_DONT_CARE
+};
+
+static int prepare_reply(struct genl_info *info, u8 cmd, struct sk_buff **skbp,
+ void **replyp, size_t size)
+{
+ struct sk_buff *skb;
+ void *reply;
+
+ /*
+ * If new attributes are added, please revisit this allocation
+ */
+ skb = nlmsg_new(size);
+ if (!skb)
+ return -ENOMEM;
+
+ if (!info) {
+ int seq = get_cpu_var(taskstats_seqnum)++;
+ put_cpu_var(taskstats_seqnum);
+
+ reply = genlmsg_put(skb, 0, seq,
+ family.id, 0, 0,
+ cmd, family.version);
+ } else
+ reply = genlmsg_put(skb, info->snd_pid, info->snd_seq,
+ family.id, 0, 0,
+ cmd, family.version);
+ if (reply == NULL) {
+ nlmsg_free(skb);
+ return -EINVAL;
+ }
+
+ *skbp = skb;
+ *replyp = reply;
+ return 0;
+}
+
+/*
+ * Send taskstats data in @skb to listener with nl_pid @pid
+ */
+static int send_reply(struct sk_buff *skb, pid_t pid)
+{
+ struct genlmsghdr *genlhdr = nlmsg_data((struct nlmsghdr *)skb->data);
+ void *reply = genlmsg_data(genlhdr);
+ int rc;
+
+ rc = genlmsg_end(skb, reply);
+ if (rc < 0) {
+ nlmsg_free(skb);
+ return rc;
+ }
+
+ return genlmsg_unicast(skb, pid);
+}
+
+/*
+ * Send taskstats data in @skb to listeners registered for @cpu's exit data
+ */
+static int send_cpu_listeners(struct sk_buff *skb, unsigned int cpu)
+{
+ struct genlmsghdr *genlhdr = nlmsg_data((struct nlmsghdr *)skb->data);
+ struct listener_list *listeners;
+ struct listener *s, *tmp;
+ struct sk_buff *skb_next, *skb_cur = skb;
+ void *reply = genlmsg_data(genlhdr);
+ int rc, ret, delcount = 0;
+
+ rc = genlmsg_end(skb, reply);
+ if (rc < 0) {
+ nlmsg_free(skb);
+ return rc;
+ }
+
+ rc = 0;
+ listeners = &per_cpu(listener_array, cpu);
+ down_read(&listeners->sem);
+ list_for_each_entry_safe(s, tmp, &listeners->list, list) {
+ skb_next = NULL;
+ if (!list_is_last(&s->list, &listeners->list)) {
+ skb_next = skb_clone(skb_cur, GFP_KERNEL);
+ if (!skb_next) {
+ nlmsg_free(skb_cur);
+ rc = -ENOMEM;
+ break;
+ }
+ }
+ ret = genlmsg_unicast(skb_cur, s->pid);
+ if (ret == -ECONNREFUSED) {
+ s->valid = 0;
+ delcount++;
+ rc = ret;
+ }
+ skb_cur = skb_next;
+ }
+ up_read(&listeners->sem);
+
+ if (!delcount)
+ return rc;
+
+ /* Delete invalidated entries */
+ down_write(&listeners->sem);
+ list_for_each_entry_safe(s, tmp, &listeners->list, list) {
+ if (!s->valid) {
+ list_del(&s->list);
+ kfree(s);
+ }
+ }
+ up_write(&listeners->sem);
+ return rc;
+}
+
+static int fill_pid(pid_t pid, struct task_struct *pidtsk,
+ struct taskstats *stats)
+{
+ int rc;
+ struct task_struct *tsk = pidtsk;
+
+ if (!pidtsk) {
+ read_lock(&tasklist_lock);
+ tsk = find_task_by_pid(pid);
+ if (!tsk) {
+ read_unlock(&tasklist_lock);
+ return -ESRCH;
+ }
+ get_task_struct(tsk);
+ read_unlock(&tasklist_lock);
+ } else
+ get_task_struct(tsk);
+
+ /*
+ * Each accounting subsystem adds calls to its functions to
+ * fill in relevant parts of struct taskstsats as follows
+ *
+ * rc = per-task-foo(stats, tsk);
+ * if (rc)
+ * goto err;
+ */
+
+ rc = delayacct_add_tsk(stats, tsk);
+ stats->version = TASKSTATS_VERSION;
+
+ /* Define err: label here if needed */
+ put_task_struct(tsk);
+ return rc;
+
+}
+
+static int fill_tgid(pid_t tgid, struct task_struct *tgidtsk,
+ struct taskstats *stats)
+{
+ struct task_struct *tsk, *first;
+ unsigned long flags;
+
+ /*
+ * Add additional stats from live tasks except zombie thread group
+ * leaders who are already counted with the dead tasks
+ */
+ first = tgidtsk;
+ if (!first) {
+ read_lock(&tasklist_lock);
+ first = find_task_by_pid(tgid);
+ if (!first) {
+ read_unlock(&tasklist_lock);
+ return -ESRCH;
+ }
+ get_task_struct(first);
+ read_unlock(&tasklist_lock);
+ } else
+ get_task_struct(first);
+
+ /* Start with stats from dead tasks */
+ spin_lock_irqsave(&first->signal->stats_lock, flags);
+ if (first->signal->stats)
+ memcpy(stats, first->signal->stats, sizeof(*stats));
+ spin_unlock_irqrestore(&first->signal->stats_lock, flags);
+
+ tsk = first;
+ read_lock(&tasklist_lock);
+ do {
+ if (tsk->exit_state == EXIT_ZOMBIE && thread_group_leader(tsk))
+ continue;
+ /*
+ * Accounting subsystem can call its functions here to
+ * fill in relevant parts of struct taskstsats as follows
+ *
+ * per-task-foo(stats, tsk);
+ */
+ delayacct_add_tsk(stats, tsk);
+
+ } while_each_thread(first, tsk);
+ read_unlock(&tasklist_lock);
+ stats->version = TASKSTATS_VERSION;
+
+ /*
+ * Accounting subsytems can also add calls here to modify
+ * fields of taskstats.
+ */
+
+ return 0;
+}
+
+
+static void fill_tgid_exit(struct task_struct *tsk)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&tsk->signal->stats_lock, flags);
+ if (!tsk->signal->stats)
+ goto ret;
+
+ /*
+ * Each accounting subsystem calls its functions here to
+ * accumalate its per-task stats for tsk, into the per-tgid structure
+ *
+ * per-task-foo(tsk->signal->stats, tsk);
+ */
+ delayacct_add_tsk(tsk->signal->stats, tsk);
+ret:
+ spin_unlock_irqrestore(&tsk->signal->stats_lock, flags);
+ return;
+}
+
+static int add_del_listener(pid_t pid, cpumask_t *maskp, int isadd)
+{
+ struct listener_list *listeners;
+ struct listener *s, *tmp;
+ unsigned int cpu;
+ cpumask_t mask = *maskp;
+
+ if (!cpus_subset(mask, cpu_possible_map))
+ return -EINVAL;
+
+ if (isadd == REGISTER) {
+ for_each_cpu_mask(cpu, mask) {
+ s = kmalloc_node(sizeof(struct listener), GFP_KERNEL,
+ cpu_to_node(cpu));
+ if (!s)
+ goto cleanup;
+ s->pid = pid;
+ INIT_LIST_HEAD(&s->list);
+ s->valid = 1;
+
+ listeners = &per_cpu(listener_array, cpu);
+ down_write(&listeners->sem);
+ list_add(&s->list, &listeners->list);
+ up_write(&listeners->sem);
+ }
+ return 0;
+ }
+
+ /* Deregister or cleanup */
+cleanup:
+ for_each_cpu_mask(cpu, mask) {
+ listeners = &per_cpu(listener_array, cpu);
+ down_write(&listeners->sem);
+ list_for_each_entry_safe(s, tmp, &listeners->list, list) {
+ if (s->pid == pid) {
+ list_del(&s->list);
+ kfree(s);
+ break;
+ }
+ }
+ up_write(&listeners->sem);
+ }
+ return 0;
+}
+
+static int parse(struct nlattr *na, cpumask_t *mask)
+{
+ char *data;
+ int len;
+ int ret;
+
+ if (na == NULL)
+ return 1;
+ len = nla_len(na);
+ if (len > TASKSTATS_CPUMASK_MAXLEN)
+ return -E2BIG;
+ if (len < 1)
+ return -EINVAL;
+ data = kmalloc(len, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+ nla_strlcpy(data, na, len);
+ ret = cpulist_parse(data, *mask);
+ kfree(data);
+ return ret;
+}
+
+static int taskstats_user_cmd(struct sk_buff *skb, struct genl_info *info)
+{
+ int rc = 0;
+ struct sk_buff *rep_skb;
+ struct taskstats stats;
+ void *reply;
+ size_t size;
+ struct nlattr *na;
+ cpumask_t mask;
+
+ rc = parse(info->attrs[TASKSTATS_CMD_ATTR_REGISTER_CPUMASK], &mask);
+ if (rc < 0)
+ return rc;
+ if (rc == 0)
+ return add_del_listener(info->snd_pid, &mask, REGISTER);
+
+ rc = parse(info->attrs[TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK], &mask);
+ if (rc < 0)
+ return rc;
+ if (rc == 0)
+ return add_del_listener(info->snd_pid, &mask, DEREGISTER);
+
+ /*
+ * Size includes space for nested attributes
+ */
+ size = nla_total_size(sizeof(u32)) +
+ nla_total_size(sizeof(struct taskstats)) + nla_total_size(0);
+
+ memset(&stats, 0, sizeof(stats));
+ rc = prepare_reply(info, TASKSTATS_CMD_NEW, &rep_skb, &reply, size);
+ if (rc < 0)
+ return rc;
+
+ if (info->attrs[TASKSTATS_CMD_ATTR_PID]) {
+ u32 pid = nla_get_u32(info->attrs[TASKSTATS_CMD_ATTR_PID]);
+ rc = fill_pid(pid, NULL, &stats);
+ if (rc < 0)
+ goto err;
+
+ na = nla_nest_start(rep_skb, TASKSTATS_TYPE_AGGR_PID);
+ NLA_PUT_U32(rep_skb, TASKSTATS_TYPE_PID, pid);
+ NLA_PUT_TYPE(rep_skb, struct taskstats, TASKSTATS_TYPE_STATS,
+ stats);
+ } else if (info->attrs[TASKSTATS_CMD_ATTR_TGID]) {
+ u32 tgid = nla_get_u32(info->attrs[TASKSTATS_CMD_ATTR_TGID]);
+ rc = fill_tgid(tgid, NULL, &stats);
+ if (rc < 0)
+ goto err;
+
+ na = nla_nest_start(rep_skb, TASKSTATS_TYPE_AGGR_TGID);
+ NLA_PUT_U32(rep_skb, TASKSTATS_TYPE_TGID, tgid);
+ NLA_PUT_TYPE(rep_skb, struct taskstats, TASKSTATS_TYPE_STATS,
+ stats);
+ } else {
+ rc = -EINVAL;
+ goto err;
+ }
+
+ nla_nest_end(rep_skb, na);
+
+ return send_reply(rep_skb, info->snd_pid);
+
+nla_put_failure:
+ return genlmsg_cancel(rep_skb, reply);
+err:
+ nlmsg_free(rep_skb);
+ return rc;
+}
+
+void taskstats_exit_alloc(struct taskstats **ptidstats, unsigned int *mycpu)
+{
+ struct listener_list *listeners;
+ struct taskstats *tmp;
+ /*
+ * This is the cpu on which the task is exiting currently and will
+ * be the one for which the exit event is sent, even if the cpu
+ * on which this function is running changes later.
+ */
+ *mycpu = raw_smp_processor_id();
+
+ *ptidstats = NULL;
+ tmp = kmem_cache_zalloc(taskstats_cache, SLAB_KERNEL);
+ if (!tmp)
+ return;
+
+ listeners = &per_cpu(listener_array, *mycpu);
+ down_read(&listeners->sem);
+ if (!list_empty(&listeners->list)) {
+ *ptidstats = tmp;
+ tmp = NULL;
+ }
+ up_read(&listeners->sem);
+ kfree(tmp);
+}
+
+/* Send pid data out on exit */
+void taskstats_exit_send(struct task_struct *tsk, struct taskstats *tidstats,
+ int group_dead, unsigned int mycpu)
+{
+ int rc;
+ struct sk_buff *rep_skb;
+ void *reply;
+ size_t size;
+ int is_thread_group;
+ struct nlattr *na;
+ unsigned long flags;
+
+ if (!family_registered || !tidstats)
+ return;
+
+ spin_lock_irqsave(&tsk->signal->stats_lock, flags);
+ is_thread_group = tsk->signal->stats ? 1 : 0;
+ spin_unlock_irqrestore(&tsk->signal->stats_lock, flags);
+
+ rc = 0;
+ /*
+ * Size includes space for nested attributes
+ */
+ size = nla_total_size(sizeof(u32)) +
+ nla_total_size(sizeof(struct taskstats)) + nla_total_size(0);
+
+ if (is_thread_group)
+ size = 2 * size; /* PID + STATS + TGID + STATS */
+
+ rc = prepare_reply(NULL, TASKSTATS_CMD_NEW, &rep_skb, &reply, size);
+ if (rc < 0)
+ goto ret;
+
+ rc = fill_pid(tsk->pid, tsk, tidstats);
+ if (rc < 0)
+ goto err_skb;
+
+ na = nla_nest_start(rep_skb, TASKSTATS_TYPE_AGGR_PID);
+ NLA_PUT_U32(rep_skb, TASKSTATS_TYPE_PID, (u32)tsk->pid);
+ NLA_PUT_TYPE(rep_skb, struct taskstats, TASKSTATS_TYPE_STATS,
+ *tidstats);
+ nla_nest_end(rep_skb, na);
+
+ if (!is_thread_group)
+ goto send;
+
+ /*
+ * tsk has/had a thread group so fill the tsk->signal->stats structure
+ * Doesn't matter if tsk is the leader or the last group member leaving
+ */
+
+ fill_tgid_exit(tsk);
+ if (!group_dead)
+ goto send;
+
+ na = nla_nest_start(rep_skb, TASKSTATS_TYPE_AGGR_TGID);
+ NLA_PUT_U32(rep_skb, TASKSTATS_TYPE_TGID, (u32)tsk->tgid);
+ /* No locking needed for tsk->signal->stats since group is dead */
+ NLA_PUT_TYPE(rep_skb, struct taskstats, TASKSTATS_TYPE_STATS,
+ *tsk->signal->stats);
+ nla_nest_end(rep_skb, na);
+
+send:
+ send_cpu_listeners(rep_skb, mycpu);
+ return;
+
+nla_put_failure:
+ genlmsg_cancel(rep_skb, reply);
+ goto ret;
+err_skb:
+ nlmsg_free(rep_skb);
+ret:
+ return;
+}
+
+static struct genl_ops taskstats_ops = {
+ .cmd = TASKSTATS_CMD_GET,
+ .doit = taskstats_user_cmd,
+ .policy = taskstats_cmd_get_policy,
+};
+
+/* Needed early in initialization */
+void __init taskstats_init_early(void)
+{
+ unsigned int i;
+
+ taskstats_cache = kmem_cache_create("taskstats_cache",
+ sizeof(struct taskstats),
+ 0, SLAB_PANIC, NULL, NULL);
+ for_each_possible_cpu(i) {
+ INIT_LIST_HEAD(&(per_cpu(listener_array, i).list));
+ init_rwsem(&(per_cpu(listener_array, i).sem));
+ }
+}
+
+static int __init taskstats_init(void)
+{
+ int rc;
+
+ rc = genl_register_family(&family);
+ if (rc)
+ return rc;
+
+ rc = genl_register_ops(&family, &taskstats_ops);
+ if (rc < 0)
+ goto err;
+
+ family_registered = 1;
+ return 0;
+err:
+ genl_unregister_family(&family);
+ return rc;
+}
+
+/*
+ * late initcall ensures initialization of statistics collection
+ * mechanisms precedes initialization of the taskstats interface
+ */
+late_initcall(taskstats_init);
int ret = try_to_del_timer_sync(timer);
if (ret >= 0)
return ret;
+ cpu_relax();
}
}
set_normalized_timespec(&xtime, sec, nsec);
set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+ clock->error = 0;
ntp_clear();
write_sequnlock_irqrestore(&xtime_lock, flags);
}
+static int timekeeping_suspended;
/*
* timekeeping_resume - Resumes the generic timekeeping subsystem.
* @dev: unused
write_seqlock_irqsave(&xtime_lock, flags);
/* restart the last cycle value */
clock->cycle_last = clocksource_read(clock);
+ clock->error = 0;
+ timekeeping_suspended = 0;
+ write_sequnlock_irqrestore(&xtime_lock, flags);
+ return 0;
+}
+
+static int timekeeping_suspend(struct sys_device *dev, pm_message_t state)
+{
+ unsigned long flags;
+
+ write_seqlock_irqsave(&xtime_lock, flags);
+ timekeeping_suspended = 1;
write_sequnlock_irqrestore(&xtime_lock, flags);
return 0;
}
/* sysfs resume/suspend bits for timekeeping */
static struct sysdev_class timekeeping_sysclass = {
.resume = timekeeping_resume,
+ .suspend = timekeeping_suspend,
set_kset_name("timekeeping"),
};
device_initcall(timekeeping_init_device);
/*
- * If the error is already larger, we look ahead another tick,
+ * If the error is already larger, we look ahead even further
* to compensate for late or lost adjustments.
*/
-static __always_inline int clocksource_bigadjust(int sign, s64 error, s64 *interval, s64 *offset)
+static __always_inline int clocksource_bigadjust(s64 error, s64 *interval, s64 *offset)
{
- int adj;
+ s64 tick_error, i;
+ u32 look_ahead, adj;
+ s32 error2, mult;
/*
- * As soon as the machine is synchronized to the external time
- * source this should be the common case.
+ * Use the current error value to determine how much to look ahead.
+ * The larger the error the slower we adjust for it to avoid problems
+ * with losing too many ticks, otherwise we would overadjust and
+ * produce an even larger error. The smaller the adjustment the
+ * faster we try to adjust for it, as lost ticks can do less harm
+ * here. This is tuned so that an error of about 1 msec is adusted
+ * within about 1 sec (or 2^20 nsec in 2^SHIFT_HZ ticks).
*/
- error >>= 2;
- if (likely(sign > 0 ? error <= *interval : error >= *interval))
- return sign;
+ error2 = clock->error >> (TICK_LENGTH_SHIFT + 22 - 2 * SHIFT_HZ);
+ error2 = abs(error2);
+ for (look_ahead = 0; error2 > 0; look_ahead++)
+ error2 >>= 2;
/*
- * An extra look ahead dampens the effect of the current error,
- * which can grow quite large with continously late updates, as
- * it would dominate the adjustment value and can lead to
- * oscillation.
+ * Now calculate the error in (1 << look_ahead) ticks, but first
+ * remove the single look ahead already included in the error.
*/
- error += current_tick_length() >> (TICK_LENGTH_SHIFT - clock->shift + 1);
- error -= clock->xtime_interval >> 1;
-
- adj = 0;
- while (1) {
- error >>= 1;
- if (sign > 0 ? error <= *interval : error >= *interval)
- break;
- adj++;
+ tick_error = current_tick_length() >> (TICK_LENGTH_SHIFT - clock->shift + 1);
+ tick_error -= clock->xtime_interval >> 1;
+ error = ((error - tick_error) >> look_ahead) + tick_error;
+
+ /* Finally calculate the adjustment shift value. */
+ i = *interval;
+ mult = 1;
+ if (error < 0) {
+ error = -error;
+ *interval = -*interval;
+ *offset = -*offset;
+ mult = -1;
}
-
- /*
- * Add the current adjustments to the error and take the offset
- * into account, the latter can cause the error to be hardly
- * reduced at the next tick. Check the error again if there's
- * room for another adjustment, thus further reducing the error
- * which otherwise had to be corrected at the next update.
- */
- error = (error << 1) - *interval + *offset;
- if (sign > 0 ? error > *interval : error < *interval)
- adj++;
+ for (adj = 0; error > i; adj++)
+ error >>= 1;
*interval <<= adj;
*offset <<= adj;
- return sign << adj;
+ return mult << adj;
}
/*
error = clock->error >> (TICK_LENGTH_SHIFT - clock->shift - 1);
if (error > interval) {
- adj = clocksource_bigadjust(1, error, &interval, &offset);
+ error >>= 2;
+ if (likely(error <= interval))
+ adj = 1;
+ else
+ adj = clocksource_bigadjust(error, &interval, &offset);
} else if (error < -interval) {
- interval = -interval;
- offset = -offset;
- adj = clocksource_bigadjust(-1, error, &interval, &offset);
+ error >>= 2;
+ if (likely(error >= -interval)) {
+ adj = -1;
+ interval = -interval;
+ offset = -offset;
+ } else
+ adj = clocksource_bigadjust(error, &interval, &offset);
} else
return;
{
cycle_t offset;
- clock->xtime_nsec += (s64)xtime.tv_nsec << clock->shift;
+ /* Make sure we're fully resumed: */
+ if (unlikely(timekeeping_suspended))
+ return;
#ifdef CONFIG_GENERIC_TIME
offset = (clocksource_read(clock) - clock->cycle_last) & clock->mask;
#else
offset = clock->cycle_interval;
#endif
+ clock->xtime_nsec += (s64)xtime.tv_nsec << clock->shift;
/* normally this loop will run just once, however in the
* case of lost or late ticks, it will accumulate correctly.
clocksource_adjust(clock, offset);
/* store full nanoseconds into xtime */
- xtime.tv_nsec = clock->xtime_nsec >> clock->shift;
+ xtime.tv_nsec = (s64)clock->xtime_nsec >> clock->shift;
clock->xtime_nsec -= (s64)xtime.tv_nsec << clock->shift;
/* check to see if there is a new clocksource to use */
#include <linux/wait.h>
#include <linux/hash.h>
-struct lock_class_key waitqueue_lock_key;
+void init_waitqueue_head(wait_queue_head_t *q)
+{
+ spin_lock_init(&q->lock);
+ INIT_LIST_HEAD(&q->task_list);
+}
-EXPORT_SYMBOL(waitqueue_lock_key);
+EXPORT_SYMBOL(init_waitqueue_head);
void fastcall add_wait_queue(wait_queue_head_t *q, wait_queue_t *wait)
{
config DEBUG_LOCK_ALLOC
bool "Lock debugging: detect incorrect freeing of live locks"
- depends on TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
+ depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
select DEBUG_SPINLOCK
select DEBUG_MUTEXES
select DEBUG_RWSEMS
config PROVE_LOCKING
bool "Lock debugging: prove locking correctness"
- depends on TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
+ depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
select LOCKDEP
select DEBUG_SPINLOCK
select DEBUG_MUTEXES
config LOCKDEP
bool
- depends on TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
+ depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
select STACKTRACE
select FRAME_POINTER
select KALLSYMS
config DEBUG_LOCKDEP
bool "Lock dependency engine debugging"
- depends on LOCKDEP
+ depends on DEBUG_KERNEL && LOCKDEP
help
If you say Y here, the lock dependency engine will do
additional runtime checks to debug itself, at the price
of more runtime overhead.
config TRACE_IRQFLAGS
+ depends on DEBUG_KERNEL
bool
default y
depends on TRACE_IRQFLAGS_SUPPORT
config STACKTRACE
bool
+ depends on DEBUG_KERNEL
depends on STACKTRACE_SUPPORT
config DEBUG_KOBJECT
static struct idr_layer *alloc_layer(struct idr *idp)
{
struct idr_layer *p;
+ unsigned long flags;
- spin_lock(&idp->lock);
+ spin_lock_irqsave(&idp->lock, flags);
if ((p = idp->id_free)) {
idp->id_free = p->ary[0];
idp->id_free_cnt--;
p->ary[0] = NULL;
}
- spin_unlock(&idp->lock);
+ spin_unlock_irqrestore(&idp->lock, flags);
return(p);
}
static void free_layer(struct idr *idp, struct idr_layer *p)
{
+ unsigned long flags;
+
/*
* Depends on the return element being zeroed.
*/
- spin_lock(&idp->lock);
+ spin_lock_irqsave(&idp->lock, flags);
__free_layer(idp, p);
- spin_unlock(&idp->lock);
+ spin_unlock_irqrestore(&idp->lock, flags);
}
/**
{
struct idr_layer *p, *new;
int layers, v, id;
+ unsigned long flags;
id = starting_id;
build_up:
* The allocation failed. If we built part of
* the structure tear it down.
*/
- spin_lock(&idp->lock);
+ spin_lock_irqsave(&idp->lock, flags);
for (new = p; p && p != idp->top; new = p) {
p = p->ary[0];
new->ary[0] = NULL;
new->bitmap = new->count = 0;
__free_layer(idp, new);
}
- spin_unlock(&idp->lock);
+ spin_unlock_irqrestore(&idp->lock, flags);
return -1;
}
new->ary[0] = p;
unsigned long min_low_pfn;
unsigned long max_pfn;
-EXPORT_SYMBOL(max_pfn); /* This is exported so
- * dma_get_required_mask(), which uses
- * it, can be an inline function */
+EXPORT_UNUSED_SYMBOL(max_pfn); /* June 2006 */
static LIST_HEAD(bdata_list);
#ifdef CONFIG_CRASH_DUMP
/*
* POSIX_FADV_WILLNEED could set PG_Referenced, and POSIX_FADV_NOREUSE could
* deactivate the pages and clear PG_Referenced.
- *
- * LINUX_FADV_ASYNC_WRITE: start async writeout of any dirty pages between file
- * offsets `offset' and `offset+len' inclusive. Any pages which are currently
- * under writeout are skipped, whether or not they are dirty.
- *
- * LINUX_FADV_WRITE_WAIT: wait upon writeout of any dirty pages between file
- * offsets `offset' and `offset+len'.
- *
- * By combining these two operations the application may do several things:
- *
- * LINUX_FADV_ASYNC_WRITE: push some or all of the dirty pages at the disk.
- *
*/
asmlinkage long sys_fadvise64_64(int fd, loff_t offset, loff_t len, int advice)
{
#include <linux/pagemap.h>
#include <linux/rmap.h>
#include <linux/module.h>
+#include <linux/delayacct.h>
#include <linux/init.h>
#include <asm/pgalloc.h>
flush_cache_page(vma, address, pte_pfn(orig_pte));
entry = mk_pte(new_page, vma->vm_page_prot);
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
+ lazy_mmu_prot_update(entry);
ptep_establish(vma, address, page_table, entry);
update_mmu_cache(vma, address, entry);
- lazy_mmu_prot_update(entry);
lru_cache_add_active(new_page);
page_add_new_anon_rmap(new_page, vma, address);
return 0;
}
-EXPORT_SYMBOL(vmtruncate_range);
+EXPORT_UNUSED_SYMBOL(vmtruncate_range); /* June 2006 */
/*
* Primitive swap readahead code. We simply read an aligned block of
migration_entry_wait(mm, pmd, address);
goto out;
}
+ delayacct_set_flag(DELAYACCT_PF_SWAPIN);
page = lookup_swap_cache(entry);
if (!page) {
swapin_readahead(entry, address, vma);
page_table = pte_offset_map_lock(mm, pmd, address, &ptl);
if (likely(pte_same(*page_table, orig_pte)))
ret = VM_FAULT_OOM;
+ delayacct_clear_flag(DELAYACCT_PF_SWAPIN);
goto unlock;
}
grab_swap_token();
}
+ delayacct_clear_flag(DELAYACCT_PF_SWAPIN);
mark_page_accessed(page);
lock_page(page);
return NODE_DATA(first_online_node);
}
-EXPORT_SYMBOL(first_online_pgdat);
+EXPORT_UNUSED_SYMBOL(first_online_pgdat); /* June 2006 */
struct pglist_data *next_online_pgdat(struct pglist_data *pgdat)
{
return NULL;
return NODE_DATA(nid);
}
-EXPORT_SYMBOL(next_online_pgdat);
+EXPORT_UNUSED_SYMBOL(next_online_pgdat); /* June 2006 */
/*
}
return zone;
}
-EXPORT_SYMBOL(next_zone);
+EXPORT_UNUSED_SYMBOL(next_zone); /* June 2006 */
vma->vm_start = vma->vm_pgoff << PAGE_SHIFT;
return 0;
}
+EXPORT_SYMBOL(remap_pfn_range);
void swap_unplug_io_fn(struct backing_dev_info *bdi, struct page *page)
{
int even_cows)
{
}
+EXPORT_SYMBOL(unmap_mapping_range);
/*
* Check that a process has enough memory to allocate a new virtual
#endif
};
+#ifdef CONFIG_LOCKDEP
+
+/*
+ * Slab sometimes uses the kmalloc slabs to store the slab headers
+ * for other slabs "off slab".
+ * The locking for this is tricky in that it nests within the locks
+ * of all other slabs in a few places; to deal with this special
+ * locking we put on-slab caches into a separate lock-class.
+ */
+static struct lock_class_key on_slab_key;
+
+static inline void init_lock_keys(struct cache_sizes *s)
+{
+ int q;
+
+ for (q = 0; q < MAX_NUMNODES; q++) {
+ if (!s->cs_cachep->nodelists[q] || OFF_SLAB(s->cs_cachep))
+ continue;
+ lockdep_set_class(&s->cs_cachep->nodelists[q]->list_lock,
+ &on_slab_key);
+ }
+}
+
+#else
+static inline void init_lock_keys(struct cache_sizes *s)
+{
+}
+#endif
+
+
+
/* Guard access to the cache-chain. */
static DEFINE_MUTEX(cache_chain_mutex);
static struct list_head cache_chain;
}
}
-static inline int cache_free_alien(struct kmem_cache *cachep, void *objp,
- int nesting)
+static inline int cache_free_alien(struct kmem_cache *cachep, void *objp)
{
struct slab *slabp = virt_to_slab(objp);
int nodeid = slabp->nodeid;
STATS_INC_NODEFREES(cachep);
if (l3->alien && l3->alien[nodeid]) {
alien = l3->alien[nodeid];
- spin_lock_nested(&alien->lock, nesting);
+ spin_lock(&alien->lock);
if (unlikely(alien->avail == alien->limit)) {
STATS_INC_ACOVERFLOW(cachep);
__drain_alien_cache(cachep, alien, nodeid);
{
}
-static inline int cache_free_alien(struct kmem_cache *cachep, void *objp,
- int nesting)
+static inline int cache_free_alien(struct kmem_cache *cachep, void *objp)
{
return 0;
}
ARCH_KMALLOC_FLAGS|SLAB_PANIC,
NULL, NULL);
}
+ init_lock_keys(sizes);
sizes->cs_dmacachep = kmem_cache_create(names->name_dma,
sizes->cs_size,
}
#endif
-static void __cache_free(struct kmem_cache *cachep, void *objp, int nesting);
-
/**
* slab_destroy - destroy and release all objects in a slab
* @cachep: cache pointer being destroyed
call_rcu(&slab_rcu->head, kmem_rcu_free);
} else {
kmem_freepages(cachep, addr);
- if (OFF_SLAB(cachep)) {
- unsigned long flags;
-
- /*
- * lockdep: we may nest inside an already held
- * ac->lock, so pass in a nesting flag:
- */
- local_irq_save(flags);
- __cache_free(cachep->slabp_cache, slabp, 1);
- local_irq_restore(flags);
- }
+ if (OFF_SLAB(cachep))
+ kmem_cache_free(cachep->slabp_cache, slabp);
}
}
if (slabp->inuse == 0) {
if (l3->free_objects > l3->free_limit) {
l3->free_objects -= cachep->num;
- /*
- * It is safe to drop the lock. The slab is
- * no longer linked to the cache. cachep
- * cannot disappear - we are using it and
- * all destruction of caches must be
- * serialized properly by the user.
- */
- spin_unlock(&l3->list_lock);
slab_destroy(cachep, slabp);
- spin_lock(&l3->list_lock);
} else {
list_add(&slabp->list, &l3->slabs_free);
}
#endif
check_irq_off();
l3 = cachep->nodelists[node];
- spin_lock_nested(&l3->list_lock, SINGLE_DEPTH_NESTING);
+ spin_lock(&l3->list_lock);
if (l3->shared) {
struct array_cache *shared_array = l3->shared;
int max = shared_array->limit - shared_array->avail;
* Release an obj back to its cache. If the obj has a constructed state, it must
* be in this state _before_ it is released. Called with disabled ints.
*/
-static void __cache_free(struct kmem_cache *cachep, void *objp, int nesting)
+static inline void __cache_free(struct kmem_cache *cachep, void *objp)
{
struct array_cache *ac = cpu_cache_get(cachep);
check_irq_off();
objp = cache_free_debugcheck(cachep, objp, __builtin_return_address(0));
- if (cache_free_alien(cachep, objp, nesting))
+ if (cache_free_alien(cachep, objp))
return;
if (likely(ac->avail < ac->limit)) {
BUG_ON(virt_to_cache(objp) != cachep);
local_irq_save(flags);
- __cache_free(cachep, objp, 0);
+ __cache_free(cachep, objp);
local_irq_restore(flags);
}
EXPORT_SYMBOL(kmem_cache_free);
kfree_debugcheck(objp);
c = virt_to_cache(objp);
debug_check_no_locks_freed(objp, obj_size(c));
- __cache_free(c, (void *)objp, 0);
+ __cache_free(c, (void *)objp);
local_irq_restore(flags);
}
EXPORT_SYMBOL(kfree);
__free_page(area->pages[i]);
}
- if (area->nr_pages > PAGE_SIZE/sizeof(struct page *))
+ if (area->flags & VM_VPAGES)
vfree(area->pages);
else
kfree(area->pages);
area->nr_pages = nr_pages;
/* Please note that the recursion is strictly bounded. */
- if (array_size > PAGE_SIZE)
+ if (array_size > PAGE_SIZE) {
pages = __vmalloc_node(array_size, gfp_mask, PAGE_KERNEL, node);
- else
+ area->flags |= VM_VPAGES;
+ } else
pages = kmalloc_node(array_size, (gfp_mask & ~__GFP_HIGHMEM), node);
area->pages = pages;
if (!area->pages) {
{
sum_vm_events(ret, &cpu_online_map);
}
+EXPORT_SYMBOL_GPL(all_vm_events);
#ifdef CONFIG_HOTPLUG
/*
static int __init atm_clip_init(void)
{
- struct proc_dir_entry *p;
neigh_table_init_no_netlink(&clip_tbl);
clip_tbl_hook = &clip_tbl;
setup_timer(&idle_timer, idle_timer_check, 0);
- p = create_proc_entry("arp", S_IRUGO, atm_proc_root);
- if (p)
- p->proc_fops = &arp_seq_fops;
+#ifdef CONFIG_PROC_FS
+ {
+ struct proc_dir_entry *p;
+
+ p = create_proc_entry("arp", S_IRUGO, atm_proc_root);
+ if (p)
+ p->proc_fops = &arp_seq_fops;
+ }
+#endif
return 0;
}
/*
* skb_migrate appends the list at "from" to "to", emptying "from" in the
* process. skb_migrate is atomic with respect to all other skb operations on
- * "from" and "to". Note that it locks both lists at the same time, so beware
- * of potential deadlocks.
+ * "from" and "to". Note that it locks both lists at the same time, so to deal
+ * with the lock ordering, the locks are taken in address order.
*
* This function should live in skbuff.c or skbuff.h.
*/
-void skb_migrate(struct sk_buff_head *from,struct sk_buff_head *to)
+void skb_migrate(struct sk_buff_head *from, struct sk_buff_head *to)
{
unsigned long flags;
struct sk_buff *skb_from = (struct sk_buff *) from;
struct sk_buff *skb_to = (struct sk_buff *) to;
struct sk_buff *prev;
- spin_lock_irqsave(&from->lock,flags);
- spin_lock(&to->lock);
+ if ((unsigned long) from < (unsigned long) to) {
+ spin_lock_irqsave(&from->lock, flags);
+ spin_lock_nested(&to->lock, SINGLE_DEPTH_NESTING);
+ } else {
+ spin_lock_irqsave(&to->lock, flags);
+ spin_lock_nested(&from->lock, SINGLE_DEPTH_NESTING);
+ }
prev = from->prev;
from->next->prev = to->prev;
prev->next = skb_to;
from->prev = skb_from;
from->next = skb_from;
from->qlen = 0;
- spin_unlock_irqrestore(&from->lock,flags);
+ spin_unlock_irqrestore(&from->lock, flags);
}
ax25_cb *s;
struct hlist_node *node;
- spin_lock_bh(&ax25_list_lock);
+ spin_lock(&ax25_list_lock);
ax25_for_each(s, node, &ax25_list) {
if ((s->iamdigi && !digi) || (!s->iamdigi && digi))
continue;
/* If device is null we match any device */
if (s->ax25_dev == NULL || s->ax25_dev->dev == dev) {
sock_hold(s->sk);
- spin_unlock_bh(&ax25_list_lock);
+ spin_unlock(&ax25_list_lock);
return s->sk;
}
}
}
- spin_unlock_bh(&ax25_list_lock);
+ spin_unlock(&ax25_list_lock);
return NULL;
}
ax25_cb *s;
struct hlist_node *node;
- spin_lock_bh(&ax25_list_lock);
+ spin_lock(&ax25_list_lock);
ax25_for_each(s, node, &ax25_list) {
if (s->sk && !ax25cmp(&s->source_addr, my_addr) &&
!ax25cmp(&s->dest_addr, dest_addr) &&
}
}
- spin_unlock_bh(&ax25_list_lock);
+ spin_unlock(&ax25_list_lock);
return sk;
}
struct sk_buff *copy;
struct hlist_node *node;
- spin_lock_bh(&ax25_list_lock);
+ spin_lock(&ax25_list_lock);
ax25_for_each(s, node, &ax25_list) {
if (s->sk != NULL && ax25cmp(&s->source_addr, addr) == 0 &&
s->sk->sk_type == SOCK_RAW &&
kfree_skb(copy);
}
}
- spin_unlock_bh(&ax25_list_lock);
+ spin_unlock(&ax25_list_lock);
}
/*
{
ax25_cb *ax25;
- if ((ax25 = kmalloc(sizeof(*ax25), GFP_ATOMIC)) == NULL)
+ if ((ax25 = kzalloc(sizeof(*ax25), GFP_ATOMIC)) == NULL)
return NULL;
- memset(ax25, 0x00, sizeof(*ax25));
atomic_set(&ax25->refcount, 1);
skb_queue_head_init(&ax25->write_queue);
{
ax25_dev *ax25_dev;
- if ((ax25_dev = kmalloc(sizeof(*ax25_dev), GFP_ATOMIC)) == NULL) {
+ if ((ax25_dev = kzalloc(sizeof(*ax25_dev), GFP_ATOMIC)) == NULL) {
printk(KERN_ERR "AX.25: ax25_dev_device_up - out of memory\n");
return;
}
ax25_unregister_sysctl();
- memset(ax25_dev, 0x00, sizeof(*ax25_dev));
-
dev->ax25_ptr = ax25_dev;
ax25_dev->dev = dev;
dev_hold(dev);
ax25_start_t3timer(ax25);
ax25_ds_set_timer(ax25->ax25_dev);
- spin_lock_bh(&ax25_list_lock);
+ spin_lock(&ax25_list_lock);
ax25_for_each(ax25o, node, &ax25_list) {
if (ax25o == ax25)
continue;
if (ax25o->state != AX25_STATE_0)
ax25_start_t3timer(ax25o);
}
- spin_unlock_bh(&ax25_list_lock);
+ spin_unlock(&ax25_list_lock);
}
void ax25_ds_establish_data_link(ax25_cb *ax25)
int res = 0;
struct hlist_node *node;
- spin_lock_bh(&ax25_list_lock);
+ spin_lock(&ax25_list_lock);
ax25_for_each(ax25, node, &ax25_list)
if (ax25->ax25_dev == ax25_dev && (ax25->condition & AX25_COND_DAMA_MODE) && ax25->state > AX25_STATE_1) {
res = 1;
break;
}
- spin_unlock_bh(&ax25_list_lock);
+ spin_unlock(&ax25_list_lock);
return res;
}
return;
}
- spin_lock_bh(&ax25_list_lock);
+ spin_lock(&ax25_list_lock);
ax25_for_each(ax25, node, &ax25_list) {
if (ax25->ax25_dev != ax25_dev || !(ax25->condition & AX25_COND_DAMA_MODE))
continue;
ax25_send_control(ax25, AX25_DISC, AX25_POLLON, AX25_COMMAND);
ax25_disconnect(ax25, ETIMEDOUT);
}
- spin_unlock_bh(&ax25_list_lock);
+ spin_unlock(&ax25_list_lock);
ax25_dev_dama_off(ax25_dev);
}
protocol->pid = pid;
protocol->func = func;
- write_lock(&protocol_list_lock);
+ write_lock_bh(&protocol_list_lock);
protocol->next = protocol_list;
protocol_list = protocol;
- write_unlock(&protocol_list_lock);
+ write_unlock_bh(&protocol_list_lock);
return 1;
}
{
struct protocol_struct *s, *protocol;
- write_lock(&protocol_list_lock);
+ write_lock_bh(&protocol_list_lock);
protocol = protocol_list;
if (protocol == NULL) {
- write_unlock(&protocol_list_lock);
+ write_unlock_bh(&protocol_list_lock);
return;
}
if (protocol->pid == pid) {
protocol_list = protocol->next;
- write_unlock(&protocol_list_lock);
+ write_unlock_bh(&protocol_list_lock);
kfree(protocol);
return;
}
if (protocol->next->pid == pid) {
s = protocol->next;
protocol->next = protocol->next->next;
- write_unlock(&protocol_list_lock);
+ write_unlock_bh(&protocol_list_lock);
kfree(s);
return;
}
protocol = protocol->next;
}
- write_unlock(&protocol_list_lock);
+ write_unlock_bh(&protocol_list_lock);
}
EXPORT_SYMBOL(ax25_protocol_release);
struct protocol_struct *protocol;
int res = 0;
- read_lock(&protocol_list_lock);
+ read_lock_bh(&protocol_list_lock);
for (protocol = protocol_list; protocol != NULL; protocol = protocol->next)
if (protocol->pid == pid) {
res = 1;
break;
}
- read_unlock(&protocol_list_lock);
+ read_unlock_bh(&protocol_list_lock);
return res;
}
int ax25_rx_iframe(ax25_cb *ax25, struct sk_buff *skb)
{
int (*func)(struct sk_buff *, ax25_cb *);
- volatile int queued = 0;
unsigned char pid;
+ int queued = 0;
if (skb == NULL) return 0;
static struct cmtp_application *cmtp_application_add(struct cmtp_session *session, __u16 appl)
{
- struct cmtp_application *app = kmalloc(sizeof(*app), GFP_KERNEL);
+ struct cmtp_application *app = kzalloc(sizeof(*app), GFP_KERNEL);
BT_DBG("session %p application %p appl %d", session, app, appl);
if (!app)
return NULL;
- memset(app, 0, sizeof(*app));
-
app->state = BT_OPEN;
app->appl = appl;
baswap(&src, &bt_sk(sock->sk)->src);
baswap(&dst, &bt_sk(sock->sk)->dst);
- session = kmalloc(sizeof(struct cmtp_session), GFP_KERNEL);
+ session = kzalloc(sizeof(struct cmtp_session), GFP_KERNEL);
if (!session)
return -ENOMEM;
- memset(session, 0, sizeof(struct cmtp_session));
down_write(&cmtp_session_sem);
if (!(e = hci_inquiry_cache_lookup(hdev, &data->bdaddr))) {
/* Entry not in the cache. Add new one. */
- if (!(e = kmalloc(sizeof(struct inquiry_entry), GFP_ATOMIC)))
+ if (!(e = kzalloc(sizeof(struct inquiry_entry), GFP_ATOMIC)))
return;
- memset(e, 0, sizeof(struct inquiry_entry));
e->next = cache->list;
cache->list = e;
}
{
struct hci_dev *hdev;
- hdev = kmalloc(sizeof(struct hci_dev), GFP_KERNEL);
+ hdev = kzalloc(sizeof(struct hci_dev), GFP_KERNEL);
if (!hdev)
return NULL;
- memset(hdev, 0, sizeof(struct hci_dev));
-
skb_queue_head_init(&hdev->driver_init);
return hdev;
config BT_HIDP
tristate "HIDP protocol support"
- depends on BT && BT_L2CAP && (BROKEN || !S390)
- select INPUT
+ depends on BT && BT_L2CAP && INPUT
help
HIDP (Human Interface Device Protocol) is a transport layer
for HID reports. HIDP is required for the Bluetooth Human
bacmp(&bt_sk(ctrl_sock->sk)->dst, &bt_sk(intr_sock->sk)->dst))
return -ENOTUNIQ;
- session = kmalloc(sizeof(struct hidp_session), GFP_KERNEL);
+ session = kzalloc(sizeof(struct hidp_session), GFP_KERNEL);
if (!session)
return -ENOMEM;
- memset(session, 0, sizeof(struct hidp_session));
session->input = input_allocate_device();
if (!session->input) {
{
struct sock *next = l2cap_pi(sk)->next_c, *prev = l2cap_pi(sk)->prev_c;
- write_lock(&l->lock);
+ write_lock_bh(&l->lock);
if (sk == l->head)
l->head = next;
l2cap_pi(next)->prev_c = prev;
if (prev)
l2cap_pi(prev)->next_c = next;
- write_unlock(&l->lock);
+ write_unlock_bh(&l->lock);
__sock_put(sk);
}
static inline void l2cap_chan_add(struct l2cap_conn *conn, struct sock *sk, struct sock *parent)
{
struct l2cap_chan_list *l = &conn->chan_list;
- write_lock(&l->lock);
+ write_lock_bh(&l->lock);
__l2cap_chan_add(conn, sk, parent);
- write_unlock(&l->lock);
+ write_unlock_bh(&l->lock);
}
static inline u8 l2cap_get_ident(struct l2cap_conn *conn)
* 200 - 254 are used by utilities like l2ping, etc.
*/
- spin_lock(&conn->lock);
+ spin_lock_bh(&conn->lock);
if (++conn->tx_ident > 128)
conn->tx_ident = 1;
id = conn->tx_ident;
- spin_unlock(&conn->lock);
+ spin_unlock_bh(&conn->lock);
return id;
}
if (!sk)
goto response;
- write_lock(&list->lock);
+ write_lock_bh(&list->lock);
/* Check if we already have channel with that dcid */
if (__l2cap_get_chan_by_dcid(list, scid)) {
- write_unlock(&list->lock);
+ write_unlock_bh(&list->lock);
sock_set_flag(sk, SOCK_ZAPPED);
l2cap_sock_kill(sk);
goto response;
result = status = 0;
done:
- write_unlock(&list->lock);
+ write_unlock_bh(&list->lock);
response:
bh_unlock_sock(parent);
struct rfcomm_dlc *rfcomm_dlc_alloc(gfp_t prio)
{
- struct rfcomm_dlc *d = kmalloc(sizeof(*d), prio);
+ struct rfcomm_dlc *d = kzalloc(sizeof(*d), prio);
+
if (!d)
return NULL;
- memset(d, 0, sizeof(*d));
init_timer(&d->timer);
d->timer.function = rfcomm_dlc_timeout;
rfcomm_dlc_clear_state(d);
BT_DBG("%p", d);
+
return d;
}
/* ---- RFCOMM sessions ---- */
static struct rfcomm_session *rfcomm_session_add(struct socket *sock, int state)
{
- struct rfcomm_session *s = kmalloc(sizeof(*s), GFP_KERNEL);
+ struct rfcomm_session *s = kzalloc(sizeof(*s), GFP_KERNEL);
+
if (!s)
return NULL;
- memset(s, 0, sizeof(*s));
BT_DBG("session %p sock %p", s, sock);
BT_DBG("id %d channel %d", req->dev_id, req->channel);
- dev = kmalloc(sizeof(struct rfcomm_dev), GFP_KERNEL);
+ dev = kzalloc(sizeof(struct rfcomm_dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
- memset(dev, 0, sizeof(struct rfcomm_dev));
write_lock_bh(&rfcomm_dev_lock);
static struct sco_conn *sco_conn_add(struct hci_conn *hcon, __u8 status)
{
struct hci_dev *hdev = hcon->hdev;
- struct sco_conn *conn;
-
- if ((conn = hcon->sco_data))
- return conn;
+ struct sco_conn *conn = hcon->sco_data;
- if (status)
+ if (conn || status)
return conn;
- if (!(conn = kmalloc(sizeof(struct sco_conn), GFP_ATOMIC)))
+ conn = kzalloc(sizeof(struct sco_conn), GFP_ATOMIC);
+ if (!conn)
return NULL;
- memset(conn, 0, sizeof(struct sco_conn));
spin_lock_init(&conn->lock);
conn->mtu = 60;
BT_DBG("hcon %p conn %p", hcon, conn);
+
return conn;
}
int br_dev_queue_push_xmit(struct sk_buff *skb)
{
/* drop mtu oversized packets except gso */
- if (packet_length(skb) > skb->dev->mtu && !skb_shinfo(skb)->gso_size)
+ if (packet_length(skb) > skb->dev->mtu && !skb_is_gso(skb))
kfree_skb(skb);
else {
#ifdef CONFIG_BRIDGE_NETFILTER
{
if (skb->protocol == htons(ETH_P_IP) &&
skb->len > skb->dev->mtu &&
- !skb_shinfo(skb)->gso_size)
+ !skb_is_gso(skb))
return ip_fragment(skb, br_dev_queue_push_xmit);
else
return br_dev_queue_push_xmit(skb);
unsigned int csum;
int ret = 0, offset = skb->h.raw - skb->data;
- if (inward) {
- skb->ip_summed = CHECKSUM_NONE;
- goto out;
+ if (inward)
+ goto out_set_summed;
+
+ if (unlikely(skb_shinfo(skb)->gso_size)) {
+ static int warned;
+
+ WARN_ON(!warned);
+ warned = 1;
+
+ /* Let GSO fix up the checksum. */
+ goto out_set_summed;
}
if (skb_cloned(skb)) {
BUG_ON(skb->csum + 2 > offset);
*(u16*)(skb->h.raw + skb->csum) = csum_fold(csum);
+
+out_set_summed:
skb->ip_summed = CHECKSUM_NONE;
out:
return ret;
struct sk_buff *segs = ERR_PTR(-EPROTONOSUPPORT);
struct packet_type *ptype;
int type = skb->protocol;
+ int err;
BUG_ON(skb_shinfo(skb)->frag_list);
- BUG_ON(skb->ip_summed != CHECKSUM_HW);
skb->mac.raw = skb->data;
skb->mac_len = skb->nh.raw - skb->data;
__skb_pull(skb, skb->mac_len);
+ if (unlikely(skb->ip_summed != CHECKSUM_HW)) {
+ static int warned;
+
+ WARN_ON(!warned);
+ warned = 1;
+
+ if (skb_header_cloned(skb) &&
+ (err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC)))
+ return ERR_PTR(err);
+ }
+
rcu_read_lock();
list_for_each_entry_rcu(ptype, &ptype_base[ntohs(type) & 15], list) {
if (ptype->type == type && !ptype->dev && ptype->gso_segment) {
+ if (unlikely(skb->ip_summed != CHECKSUM_HW)) {
+ err = ptype->gso_send_check(skb);
+ segs = ERR_PTR(err);
+ if (err || skb_gso_ok(skb, features))
+ break;
+ __skb_push(skb, skb->data - skb->nh.raw);
+ }
segs = ptype->gso_segment(skb, features);
break;
}
if (dev->qdisc_ingress) {
__u32 ttl = (__u32) G_TC_RTTL(skb->tc_verd);
if (MAX_RED_LOOP < ttl++) {
- printk("Redir loop detected Dropping packet (%s->%s)\n",
+ printk(KERN_WARNING "Redir loop detected Dropping packet (%s->%s)\n",
skb->input_dev->name, skb->dev->name);
return TC_ACT_SHOT;
}
/* Fix illegal SG+CSUM combinations. */
if ((dev->features & NETIF_F_SG) &&
!(dev->features & NETIF_F_ALL_CSUM)) {
- printk("%s: Dropping NETIF_F_SG since no checksum feature.\n",
+ printk(KERN_NOTICE "%s: Dropping NETIF_F_SG since no checksum feature.\n",
dev->name);
dev->features &= ~NETIF_F_SG;
}
/* TSO requires that SG is present as well. */
if ((dev->features & NETIF_F_TSO) &&
!(dev->features & NETIF_F_SG)) {
- printk("%s: Dropping NETIF_F_TSO since no SG feature.\n",
+ printk(KERN_NOTICE "%s: Dropping NETIF_F_TSO since no SG feature.\n",
dev->name);
dev->features &= ~NETIF_F_TSO;
}
{
struct ethtool_pauseparam pauseparam;
- if (!dev->ethtool_ops->get_pauseparam)
+ if (!dev->ethtool_ops->set_pauseparam)
return -EOPNOTSUPP;
if (copy_from_user(&pauseparam, useraddr, sizeof(pauseparam)))
}
-static void skb_drop_fraglist(struct sk_buff *skb)
+static void skb_drop_list(struct sk_buff **listp)
{
- struct sk_buff *list = skb_shinfo(skb)->frag_list;
+ struct sk_buff *list = *listp;
- skb_shinfo(skb)->frag_list = NULL;
+ *listp = NULL;
do {
struct sk_buff *this = list;
} while (list);
}
+static inline void skb_drop_fraglist(struct sk_buff *skb)
+{
+ skb_drop_list(&skb_shinfo(skb)->frag_list);
+}
+
static void skb_clone_fraglist(struct sk_buff *skb)
{
struct sk_buff *list;
int ___pskb_trim(struct sk_buff *skb, unsigned int len)
{
+ struct sk_buff **fragp;
+ struct sk_buff *frag;
int offset = skb_headlen(skb);
int nfrags = skb_shinfo(skb)->nr_frags;
int i;
+ int err;
+
+ if (skb_cloned(skb) &&
+ unlikely((err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC))))
+ return err;
for (i = 0; i < nfrags; i++) {
int end = offset + skb_shinfo(skb)->frags[i].size;
- if (end > len) {
- if (skb_cloned(skb)) {
- if (pskb_expand_head(skb, 0, 0, GFP_ATOMIC))
- return -ENOMEM;
- }
- if (len <= offset) {
- put_page(skb_shinfo(skb)->frags[i].page);
- skb_shinfo(skb)->nr_frags--;
- } else {
- skb_shinfo(skb)->frags[i].size = len - offset;
- }
+
+ if (end < len) {
+ offset = end;
+ continue;
}
- offset = end;
+
+ if (len > offset)
+ skb_shinfo(skb)->frags[i++].size = len - offset;
+
+ skb_shinfo(skb)->nr_frags = i;
+
+ for (; i < nfrags; i++)
+ put_page(skb_shinfo(skb)->frags[i].page);
+
+ if (skb_shinfo(skb)->frag_list)
+ skb_drop_fraglist(skb);
+ break;
}
- if (offset < len) {
+ for (fragp = &skb_shinfo(skb)->frag_list; (frag = *fragp);
+ fragp = &frag->next) {
+ int end = offset + frag->len;
+
+ if (skb_shared(frag)) {
+ struct sk_buff *nfrag;
+
+ nfrag = skb_clone(frag, GFP_ATOMIC);
+ if (unlikely(!nfrag))
+ return -ENOMEM;
+
+ nfrag->next = frag->next;
+ frag = nfrag;
+ *fragp = frag;
+ }
+
+ if (end < len) {
+ offset = end;
+ continue;
+ }
+
+ if (end > len &&
+ unlikely((err = pskb_trim(frag, len - offset))))
+ return err;
+
+ if (frag->next)
+ skb_drop_list(&frag->next);
+ break;
+ }
+
+ if (len > skb_headlen(skb)) {
skb->data_len -= skb->len - len;
skb->len = len;
} else {
- if (len <= skb_headlen(skb)) {
- skb->len = len;
- skb->data_len = 0;
- skb->tail = skb->data + len;
- if (skb_shinfo(skb)->frag_list && !skb_cloned(skb))
- skb_drop_fraglist(skb);
- } else {
- skb->data_len -= skb->len - len;
- skb->len = len;
- }
+ skb->len = len;
+ skb->data_len = 0;
+ skb->tail = skb->data + len;
}
return 0;
void __sk_stream_mem_reclaim(struct sock *sk)
{
- if (sk->sk_forward_alloc >= SK_STREAM_MEM_QUANTUM) {
- atomic_sub(sk->sk_forward_alloc / SK_STREAM_MEM_QUANTUM,
- sk->sk_prot->memory_allocated);
- sk->sk_forward_alloc &= SK_STREAM_MEM_QUANTUM - 1;
- if (*sk->sk_prot->memory_pressure &&
- (atomic_read(sk->sk_prot->memory_allocated) <
- sk->sk_prot->sysctl_mem[0]))
- *sk->sk_prot->memory_pressure = 0;
- }
+ atomic_sub(sk->sk_forward_alloc / SK_STREAM_MEM_QUANTUM,
+ sk->sk_prot->memory_allocated);
+ sk->sk_forward_alloc &= SK_STREAM_MEM_QUANTUM - 1;
+ if (*sk->sk_prot->memory_pressure &&
+ (atomic_read(sk->sk_prot->memory_allocated) <
+ sk->sk_prot->sysctl_mem[0]))
+ *sk->sk_prot->memory_pressure = 0;
}
EXPORT_SYMBOL(__sk_stream_mem_reclaim);
err = -EINVAL;
else
err = dccp_setsockopt_change(sk, DCCPO_CHANGE_L,
- (struct dccp_so_feat *)
+ (struct dccp_so_feat __user *)
optval);
break;
err = -EINVAL;
else
err = dccp_setsockopt_change(sk, DCCPO_CHANGE_R,
- (struct dccp_so_feat *)
+ (struct dccp_so_feat __user *)
optval);
break;
rcu_read_lock();
hlist_for_each_entry(r, node, &dn_fib_rules, r_hlist) {
if (idx < s_idx)
- continue;
+ goto next;
if (dn_fib_fill_rule(skb, r, cb, NLM_F_MULTI) < 0)
break;
+next:
idx++;
}
rcu_read_unlock();
loss packets.
See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf
-config TCP_CONG_COMPOUND
- tristate "TCP Compound"
- depends on EXPERIMENTAL
- default n
- ---help---
- TCP Compound is a sender-side only change to TCP that uses
- a mixed Reno/Vegas approach to calculate the cwnd.
- For further details look here:
- ftp://ftp.research.microsoft.com/pub/tr/TR-2005-86.pdf
-
endmenu
config TCP_CONG_BIC
obj-$(CONFIG_TCP_CONG_VENO) += tcp_veno.o
obj-$(CONFIG_TCP_CONG_SCALABLE) += tcp_scalable.o
obj-$(CONFIG_TCP_CONG_LP) += tcp_lp.o
-obj-$(CONFIG_TCP_CONG_COMPOUND) += tcp_compound.o
obj-$(CONFIG_XFRM) += xfrm4_policy.o xfrm4_state.o xfrm4_input.o \
xfrm4_output.o
EXPORT_SYMBOL(inet_sk_rebuild_header);
+static int inet_gso_send_check(struct sk_buff *skb)
+{
+ struct iphdr *iph;
+ struct net_protocol *ops;
+ int proto;
+ int ihl;
+ int err = -EINVAL;
+
+ if (unlikely(!pskb_may_pull(skb, sizeof(*iph))))
+ goto out;
+
+ iph = skb->nh.iph;
+ ihl = iph->ihl * 4;
+ if (ihl < sizeof(*iph))
+ goto out;
+
+ if (unlikely(!pskb_may_pull(skb, ihl)))
+ goto out;
+
+ skb->h.raw = __skb_pull(skb, ihl);
+ iph = skb->nh.iph;
+ proto = iph->protocol & (MAX_INET_PROTOS - 1);
+ err = -EPROTONOSUPPORT;
+
+ rcu_read_lock();
+ ops = rcu_dereference(inet_protos[proto]);
+ if (likely(ops && ops->gso_send_check))
+ err = ops->gso_send_check(skb);
+ rcu_read_unlock();
+
+out:
+ return err;
+}
+
static struct sk_buff *inet_gso_segment(struct sk_buff *skb, int features)
{
struct sk_buff *segs = ERR_PTR(-EINVAL);
static struct net_protocol tcp_protocol = {
.handler = tcp_v4_rcv,
.err_handler = tcp_v4_err,
+ .gso_send_check = tcp_v4_gso_send_check,
.gso_segment = tcp_tso_segment,
.no_policy = 1,
};
static struct packet_type ip_packet_type = {
.type = __constant_htons(ETH_P_IP),
.func = ip_rcv,
+ .gso_send_check = inet_gso_send_check,
.gso_segment = inet_gso_segment,
};
rcu_read_lock();
hlist_for_each_entry(r, node, &fib_rules, hlist) {
-
if (idx < s_idx)
- continue;
+ goto next;
if (inet_fill_rule(skb, r, NETLINK_CB(cb->skb).pid,
cb->nlh->nlmsg_seq,
RTM_NEWRULE, NLM_F_MULTI) < 0)
break;
+next:
idx++;
}
rcu_read_unlock();
*/
if (!fa_head) {
- fa_head = fib_insert_node(t, &err, key, plen);
err = 0;
+ fa_head = fib_insert_node(t, &err, key, plen);
if (err)
goto out_free_new_fa;
}
static DEFINE_RWLOCK(peer_pool_lock);
#define PEER_MAXDEPTH 40 /* sufficient for about 2^27 nodes */
-static volatile int peer_total;
+static int peer_total;
/* Exported for sysctl_net_ipv4. */
int inet_peer_threshold = 65536 + 128; /* start to throw entries more
* aggressively at this stage */
goto drop;
}
+ /* Remove any debris in the socket control block */
+ memset(&(IPCB(skb)->opt), 0, sizeof(struct ip_options));
+
return NF_HOOK(PF_INET, NF_IP_PRE_ROUTING, skb, dev, NULL,
ip_rcv_finish);
return dst_output(skb);
}
#endif
- if (skb->len > dst_mtu(skb->dst) && !skb_shinfo(skb)->gso_size)
+ if (skb->len > dst_mtu(skb->dst) && !skb_is_gso(skb))
return ip_fragment(skb, ip_finish_output2);
else
return ip_finish_output2(skb);
while (size > 0) {
int i;
- if (skb_shinfo(skb)->gso_size)
+ if (skb_is_gso(skb))
len = size;
else {
if (err)
goto out;
- skb_put(skb, dlen - plen);
+ skb->truesize += dlen - plen;
+ __skb_put(skb, dlen - plen);
memcpy(skb->data, scratch, dlen);
out:
put_cpu();
+++ /dev/null
-/*
- * TCP Vegas congestion control
- *
- * This is based on the congestion detection/avoidance scheme described in
- * Lawrence S. Brakmo and Larry L. Peterson.
- * "TCP Vegas: End to end congestion avoidance on a global internet."
- * IEEE Journal on Selected Areas in Communication, 13(8):1465--1480,
- * October 1995. Available from:
- * ftp://ftp.cs.arizona.edu/xkernel/Papers/jsac.ps
- *
- * See http://www.cs.arizona.edu/xkernel/ for their implementation.
- * The main aspects that distinguish this implementation from the
- * Arizona Vegas implementation are:
- * o We do not change the loss detection or recovery mechanisms of
- * Linux in any way. Linux already recovers from losses quite well,
- * using fine-grained timers, NewReno, and FACK.
- * o To avoid the performance penalty imposed by increasing cwnd
- * only every-other RTT during slow start, we increase during
- * every RTT during slow start, just like Reno.
- * o Largely to allow continuous cwnd growth during slow start,
- * we use the rate at which ACKs come back as the "actual"
- * rate, rather than the rate at which data is sent.
- * o To speed convergence to the right rate, we set the cwnd
- * to achieve the right ("actual") rate when we exit slow start.
- * o To filter out the noise caused by delayed ACKs, we use the
- * minimum RTT sample observed during the last RTT to calculate
- * the actual rate.
- * o When the sender re-starts from idle, it waits until it has
- * received ACKs for an entire flight of new data before making
- * a cwnd adjustment decision. The original Vegas implementation
- * assumed senders never went idle.
- *
- *
- * TCP Compound based on TCP Vegas
- *
- * further details can be found here:
- * ftp://ftp.research.microsoft.com/pub/tr/TR-2005-86.pdf
- */
-
-#include <linux/config.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/skbuff.h>
-#include <linux/inet_diag.h>
-
-#include <net/tcp.h>
-
-/* Default values of the Vegas variables, in fixed-point representation
- * with V_PARAM_SHIFT bits to the right of the binary point.
- */
-#define V_PARAM_SHIFT 1
-
-#define TCP_COMPOUND_ALPHA 3U
-#define TCP_COMPOUND_BETA 1U
-#define TCP_COMPOUND_GAMMA 30
-#define TCP_COMPOUND_ZETA 1
-
-/* TCP compound variables */
-struct compound {
- u32 beg_snd_nxt; /* right edge during last RTT */
- u32 beg_snd_una; /* left edge during last RTT */
- u32 beg_snd_cwnd; /* saves the size of the cwnd */
- u8 doing_vegas_now; /* if true, do vegas for this RTT */
- u16 cntRTT; /* # of RTTs measured within last RTT */
- u32 minRTT; /* min of RTTs measured within last RTT (in usec) */
- u32 baseRTT; /* the min of all Vegas RTT measurements seen (in usec) */
-
- u32 cwnd;
- u32 dwnd;
-};
-
-/* There are several situations when we must "re-start" Vegas:
- *
- * o when a connection is established
- * o after an RTO
- * o after fast recovery
- * o when we send a packet and there is no outstanding
- * unacknowledged data (restarting an idle connection)
- *
- * In these circumstances we cannot do a Vegas calculation at the
- * end of the first RTT, because any calculation we do is using
- * stale info -- both the saved cwnd and congestion feedback are
- * stale.
- *
- * Instead we must wait until the completion of an RTT during
- * which we actually receive ACKs.
- */
-static inline void vegas_enable(struct sock *sk)
-{
- const struct tcp_sock *tp = tcp_sk(sk);
- struct compound *vegas = inet_csk_ca(sk);
-
- /* Begin taking Vegas samples next time we send something. */
- vegas->doing_vegas_now = 1;
-
- /* Set the beginning of the next send window. */
- vegas->beg_snd_nxt = tp->snd_nxt;
-
- vegas->cntRTT = 0;
- vegas->minRTT = 0x7fffffff;
-}
-
-/* Stop taking Vegas samples for now. */
-static inline void vegas_disable(struct sock *sk)
-{
- struct compound *vegas = inet_csk_ca(sk);
-
- vegas->doing_vegas_now = 0;
-}
-
-static void tcp_compound_init(struct sock *sk)
-{
- struct compound *vegas = inet_csk_ca(sk);
- const struct tcp_sock *tp = tcp_sk(sk);
-
- vegas->baseRTT = 0x7fffffff;
- vegas_enable(sk);
-
- vegas->dwnd = 0;
- vegas->cwnd = tp->snd_cwnd;
-}
-
-/* Do RTT sampling needed for Vegas.
- * Basically we:
- * o min-filter RTT samples from within an RTT to get the current
- * propagation delay + queuing delay (we are min-filtering to try to
- * avoid the effects of delayed ACKs)
- * o min-filter RTT samples from a much longer window (forever for now)
- * to find the propagation delay (baseRTT)
- */
-static void tcp_compound_rtt_calc(struct sock *sk, u32 usrtt)
-{
- struct compound *vegas = inet_csk_ca(sk);
- u32 vrtt = usrtt + 1; /* Never allow zero rtt or baseRTT */
-
- /* Filter to find propagation delay: */
- if (vrtt < vegas->baseRTT)
- vegas->baseRTT = vrtt;
-
- /* Find the min RTT during the last RTT to find
- * the current prop. delay + queuing delay:
- */
-
- vegas->minRTT = min(vegas->minRTT, vrtt);
- vegas->cntRTT++;
-}
-
-static void tcp_compound_state(struct sock *sk, u8 ca_state)
-{
-
- if (ca_state == TCP_CA_Open)
- vegas_enable(sk);
- else
- vegas_disable(sk);
-}
-
-
-/* 64bit divisor, dividend and result. dynamic precision */
-static inline u64 div64_64(u64 dividend, u64 divisor)
-{
- u32 d = divisor;
-
- if (divisor > 0xffffffffULL) {
- unsigned int shift = fls(divisor >> 32);
-
- d = divisor >> shift;
- dividend >>= shift;
- }
-
- /* avoid 64 bit division if possible */
- if (dividend >> 32)
- do_div(dividend, d);
- else
- dividend = (u32) dividend / d;
-
- return dividend;
-}
-
-/* calculate the quartic root of "a" using Newton-Raphson */
-static u32 qroot(u64 a)
-{
- u32 x, x1;
-
- /* Initial estimate is based on:
- * qrt(x) = exp(log(x) / 4)
- */
- x = 1u << (fls64(a) >> 2);
-
- /*
- * Iteration based on:
- * 3
- * x = ( 3 * x + a / x ) / 4
- * k+1 k k
- */
- do {
- u64 x3 = x;
-
- x1 = x;
- x3 *= x;
- x3 *= x;
-
- x = (3 * x + (u32) div64_64(a, x3)) / 4;
- } while (abs(x1 - x) > 1);
-
- return x;
-}
-
-
-/*
- * If the connection is idle and we are restarting,
- * then we don't want to do any Vegas calculations
- * until we get fresh RTT samples. So when we
- * restart, we reset our Vegas state to a clean
- * slate. After we get acks for this flight of
- * packets, _then_ we can make Vegas calculations
- * again.
- */
-static void tcp_compound_cwnd_event(struct sock *sk, enum tcp_ca_event event)
-{
- if (event == CA_EVENT_CWND_RESTART || event == CA_EVENT_TX_START)
- tcp_compound_init(sk);
-}
-
-static void tcp_compound_cong_avoid(struct sock *sk, u32 ack,
- u32 seq_rtt, u32 in_flight, int flag)
-{
- struct tcp_sock *tp = tcp_sk(sk);
- struct compound *vegas = inet_csk_ca(sk);
- u8 inc = 0;
-
- if (vegas->cwnd + vegas->dwnd > tp->snd_cwnd) {
- if (vegas->cwnd > tp->snd_cwnd || vegas->dwnd > tp->snd_cwnd) {
- vegas->cwnd = tp->snd_cwnd;
- vegas->dwnd = 0;
- } else
- vegas->cwnd = tp->snd_cwnd - vegas->dwnd;
-
- }
-
- if (!tcp_is_cwnd_limited(sk, in_flight))
- return;
-
- if (vegas->cwnd <= tp->snd_ssthresh)
- inc = 1;
- else if (tp->snd_cwnd_cnt < tp->snd_cwnd)
- tp->snd_cwnd_cnt++;
-
- if (tp->snd_cwnd_cnt >= tp->snd_cwnd) {
- inc = 1;
- tp->snd_cwnd_cnt = 0;
- }
-
- if (inc && tp->snd_cwnd < tp->snd_cwnd_clamp)
- vegas->cwnd++;
-
- /* The key players are v_beg_snd_una and v_beg_snd_nxt.
- *
- * These are so named because they represent the approximate values
- * of snd_una and snd_nxt at the beginning of the current RTT. More
- * precisely, they represent the amount of data sent during the RTT.
- * At the end of the RTT, when we receive an ACK for v_beg_snd_nxt,
- * we will calculate that (v_beg_snd_nxt - v_beg_snd_una) outstanding
- * bytes of data have been ACKed during the course of the RTT, giving
- * an "actual" rate of:
- *
- * (v_beg_snd_nxt - v_beg_snd_una) / (rtt duration)
- *
- * Unfortunately, v_beg_snd_una is not exactly equal to snd_una,
- * because delayed ACKs can cover more than one segment, so they
- * don't line up nicely with the boundaries of RTTs.
- *
- * Another unfortunate fact of life is that delayed ACKs delay the
- * advance of the left edge of our send window, so that the number
- * of bytes we send in an RTT is often less than our cwnd will allow.
- * So we keep track of our cwnd separately, in v_beg_snd_cwnd.
- */
-
- if (after(ack, vegas->beg_snd_nxt)) {
- /* Do the Vegas once-per-RTT cwnd adjustment. */
- u32 old_wnd, old_snd_cwnd;
-
- /* Here old_wnd is essentially the window of data that was
- * sent during the previous RTT, and has all
- * been acknowledged in the course of the RTT that ended
- * with the ACK we just received. Likewise, old_snd_cwnd
- * is the cwnd during the previous RTT.
- */
- if (!tp->mss_cache)
- return;
-
- old_wnd = (vegas->beg_snd_nxt - vegas->beg_snd_una) /
- tp->mss_cache;
- old_snd_cwnd = vegas->beg_snd_cwnd;
-
- /* Save the extent of the current window so we can use this
- * at the end of the next RTT.
- */
- vegas->beg_snd_una = vegas->beg_snd_nxt;
- vegas->beg_snd_nxt = tp->snd_nxt;
- vegas->beg_snd_cwnd = tp->snd_cwnd;
-
- /* We do the Vegas calculations only if we got enough RTT
- * samples that we can be reasonably sure that we got
- * at least one RTT sample that wasn't from a delayed ACK.
- * If we only had 2 samples total,
- * then that means we're getting only 1 ACK per RTT, which
- * means they're almost certainly delayed ACKs.
- * If we have 3 samples, we should be OK.
- */
-
- if (vegas->cntRTT > 2) {
- u32 rtt, target_cwnd, diff;
- u32 brtt, dwnd;
-
- /* We have enough RTT samples, so, using the Vegas
- * algorithm, we determine if we should increase or
- * decrease cwnd, and by how much.
- */
-
- /* Pluck out the RTT we are using for the Vegas
- * calculations. This is the min RTT seen during the
- * last RTT. Taking the min filters out the effects
- * of delayed ACKs, at the cost of noticing congestion
- * a bit later.
- */
- rtt = vegas->minRTT;
-
- /* Calculate the cwnd we should have, if we weren't
- * going too fast.
- *
- * This is:
- * (actual rate in segments) * baseRTT
- * We keep it as a fixed point number with
- * V_PARAM_SHIFT bits to the right of the binary point.
- */
- if (!rtt)
- return;
-
- brtt = vegas->baseRTT;
- target_cwnd = ((old_wnd * brtt)
- << V_PARAM_SHIFT) / rtt;
-
- /* Calculate the difference between the window we had,
- * and the window we would like to have. This quantity
- * is the "Diff" from the Arizona Vegas papers.
- *
- * Again, this is a fixed point number with
- * V_PARAM_SHIFT bits to the right of the binary
- * point.
- */
-
- diff = (old_wnd << V_PARAM_SHIFT) - target_cwnd;
-
- dwnd = vegas->dwnd;
-
- if (diff < (TCP_COMPOUND_GAMMA << V_PARAM_SHIFT)) {
- u64 v;
- u32 x;
-
- /*
- * The TCP Compound paper describes the choice
- * of "k" determines the agressiveness,
- * ie. slope of the response function.
- *
- * For same value as HSTCP would be 0.8
- * but for computaional reasons, both the
- * original authors and this implementation
- * use 0.75.
- */
- v = old_wnd;
- x = qroot(v * v * v) >> TCP_COMPOUND_ALPHA;
- if (x > 1)
- dwnd = x - 1;
- else
- dwnd = 0;
-
- dwnd += vegas->dwnd;
-
- } else if ((dwnd << V_PARAM_SHIFT) <
- (diff * TCP_COMPOUND_BETA))
- dwnd = 0;
- else
- dwnd =
- ((dwnd << V_PARAM_SHIFT) -
- (diff *
- TCP_COMPOUND_BETA)) >> V_PARAM_SHIFT;
-
- vegas->dwnd = dwnd;
-
- }
-
- /* Wipe the slate clean for the next RTT. */
- vegas->cntRTT = 0;
- vegas->minRTT = 0x7fffffff;
- }
-
- tp->snd_cwnd = vegas->cwnd + vegas->dwnd;
-}
-
-/* Extract info for Tcp socket info provided via netlink. */
-static void tcp_compound_get_info(struct sock *sk, u32 ext, struct sk_buff *skb)
-{
- const struct compound *ca = inet_csk_ca(sk);
- if (ext & (1 << (INET_DIAG_VEGASINFO - 1))) {
- struct tcpvegas_info *info;
-
- info = RTA_DATA(__RTA_PUT(skb, INET_DIAG_VEGASINFO,
- sizeof(*info)));
-
- info->tcpv_enabled = ca->doing_vegas_now;
- info->tcpv_rttcnt = ca->cntRTT;
- info->tcpv_rtt = ca->baseRTT;
- info->tcpv_minrtt = ca->minRTT;
- rtattr_failure:;
- }
-}
-
-static struct tcp_congestion_ops tcp_compound = {
- .init = tcp_compound_init,
- .ssthresh = tcp_reno_ssthresh,
- .cong_avoid = tcp_compound_cong_avoid,
- .rtt_sample = tcp_compound_rtt_calc,
- .set_state = tcp_compound_state,
- .cwnd_event = tcp_compound_cwnd_event,
- .get_info = tcp_compound_get_info,
-
- .owner = THIS_MODULE,
- .name = "compound",
-};
-
-static int __init tcp_compound_register(void)
-{
- BUG_ON(sizeof(struct compound) > ICSK_CA_PRIV_SIZE);
- tcp_register_congestion_control(&tcp_compound);
- return 0;
-}
-
-static void __exit tcp_compound_unregister(void)
-{
- tcp_unregister_congestion_control(&tcp_compound);
-}
-
-module_init(tcp_compound_register);
-module_exit(tcp_compound_unregister);
-
-MODULE_AUTHOR("Angelo P. Castellani, Stephen Hemminger");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("TCP Compound");
tp->snd_cwnd++;
}
} else {
- /* Update AIMD parameters */
+ /* Update AIMD parameters.
+ *
+ * We want to guarantee that:
+ * hstcp_aimd_vals[ca->ai-1].cwnd <
+ * snd_cwnd <=
+ * hstcp_aimd_vals[ca->ai].cwnd
+ */
if (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd) {
while (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd &&
ca->ai < HSTCP_AIMD_MAX - 1)
ca->ai++;
- } else if (tp->snd_cwnd < hstcp_aimd_vals[ca->ai].cwnd) {
- while (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd &&
- ca->ai > 0)
+ } else if (ca->ai && tp->snd_cwnd <= hstcp_aimd_vals[ca->ai-1].cwnd) {
+ while (ca->ai && tp->snd_cwnd <= hstcp_aimd_vals[ca->ai-1].cwnd)
ca->ai--;
}
}
}
+int tcp_v4_gso_send_check(struct sk_buff *skb)
+{
+ struct iphdr *iph;
+ struct tcphdr *th;
+
+ if (!pskb_may_pull(skb, sizeof(*th)))
+ return -EINVAL;
+
+ iph = skb->nh.iph;
+ th = skb->h.th;
+
+ th->check = 0;
+ th->check = ~tcp_v4_check(th, skb->len, iph->saddr, iph->daddr, 0);
+ skb->csum = offsetof(struct tcphdr, check);
+ skb->ip_summed = CHECKSUM_HW;
+ return 0;
+}
+
/*
* This routine will send an RST to the other tcp.
*
}
#endif
- if (!skb_shinfo(skb)->gso_size)
+ if (!skb_is_gso(skb))
return xfrm4_output_finish2(skb);
skb->protocol = htons(ETH_P_IP);
kfree(ifp);
}
+static void
+ipv6_link_dev_addr(struct inet6_dev *idev, struct inet6_ifaddr *ifp)
+{
+ struct inet6_ifaddr *ifa, **ifap;
+ int ifp_scope = ipv6_addr_src_scope(&ifp->addr);
+
+ /*
+ * Each device address list is sorted in order of scope -
+ * global before linklocal.
+ */
+ for (ifap = &idev->addr_list; (ifa = *ifap) != NULL;
+ ifap = &ifa->if_next) {
+ if (ifp_scope >= ipv6_addr_src_scope(&ifa->addr))
+ break;
+ }
+
+ ifp->if_next = *ifap;
+ *ifap = ifp;
+}
+
/* On success it returns ifp with increased reference count */
static struct inet6_ifaddr *
write_lock(&idev->lock);
/* Add to inet6_dev unicast addr list. */
- ifa->if_next = idev->addr_list;
- idev->addr_list = ifa;
+ ipv6_link_dev_addr(idev, ifa);
#ifdef CONFIG_IPV6_PRIVACY
if (ifa->flags&IFA_F_TEMPORARY) {
continue;
} else if (score.scope < hiscore.scope) {
if (score.scope < daddr_scope)
- continue;
+ break; /* addresses sorted by scope */
else {
score.rule = 2;
goto record_it;
int ip6_output(struct sk_buff *skb)
{
- if ((skb->len > dst_mtu(skb->dst) && !skb_shinfo(skb)->gso_size) ||
+ if ((skb->len > dst_mtu(skb->dst) && !skb_is_gso(skb)) ||
dst_allfrag(skb->dst))
return ip6_fragment(skb, ip6_output2);
else
skb->priority = sk->sk_priority;
mtu = dst_mtu(dst);
- if ((skb->len <= mtu) || ipfragok || skb_shinfo(skb)->gso_size) {
+ if ((skb->len <= mtu) || ipfragok || skb_is_gso(skb)) {
IP6_INC_STATS(IPSTATS_MIB_OUTREQUESTS);
return NF_HOOK(PF_INET6, NF_IP6_LOCAL_OUT, skb, NULL, dst->dev,
dst_output);
goto out_put_cpu;
}
- skb_put(skb, dlen - plen);
+ skb->truesize += dlen - plen;
+ __skb_put(skb, dlen - plen);
memcpy(skb->data, scratch, dlen);
err = ipch->nexthdr;
DEFINE_SNMP_STAT(struct ipstats_mib, ipv6_statistics) __read_mostly;
-static struct sk_buff *ipv6_gso_segment(struct sk_buff *skb, int features)
+static struct inet6_protocol *ipv6_gso_pull_exthdrs(struct sk_buff *skb,
+ int proto)
{
- struct sk_buff *segs = ERR_PTR(-EINVAL);
- struct ipv6hdr *ipv6h;
- struct inet6_protocol *ops;
- int proto;
+ struct inet6_protocol *ops = NULL;
- if (unlikely(skb_shinfo(skb)->gso_type &
- ~(SKB_GSO_UDP |
- SKB_GSO_DODGY |
- SKB_GSO_TCP_ECN |
- SKB_GSO_TCPV6 |
- 0)))
- goto out;
-
- if (unlikely(!pskb_may_pull(skb, sizeof(*ipv6h))))
- goto out;
-
- ipv6h = skb->nh.ipv6h;
- proto = ipv6h->nexthdr;
- __skb_pull(skb, sizeof(*ipv6h));
-
- rcu_read_lock();
for (;;) {
struct ipv6_opt_hdr *opth;
int len;
ops = rcu_dereference(inet6_protos[proto]);
if (unlikely(!ops))
- goto unlock;
+ break;
if (!(ops->flags & INET6_PROTO_GSO_EXTHDR))
break;
}
if (unlikely(!pskb_may_pull(skb, 8)))
- goto unlock;
+ break;
opth = (void *)skb->data;
len = opth->hdrlen * 8 + 8;
if (unlikely(!pskb_may_pull(skb, len)))
- goto unlock;
+ break;
proto = opth->nexthdr;
__skb_pull(skb, len);
}
- skb->h.raw = skb->data;
- if (likely(ops->gso_segment))
- segs = ops->gso_segment(skb, features);
+ return ops;
+}
+
+static int ipv6_gso_send_check(struct sk_buff *skb)
+{
+ struct ipv6hdr *ipv6h;
+ struct inet6_protocol *ops;
+ int err = -EINVAL;
+
+ if (unlikely(!pskb_may_pull(skb, sizeof(*ipv6h))))
+ goto out;
-unlock:
+ ipv6h = skb->nh.ipv6h;
+ __skb_pull(skb, sizeof(*ipv6h));
+ err = -EPROTONOSUPPORT;
+
+ rcu_read_lock();
+ ops = ipv6_gso_pull_exthdrs(skb, ipv6h->nexthdr);
+ if (likely(ops && ops->gso_send_check)) {
+ skb->h.raw = skb->data;
+ err = ops->gso_send_check(skb);
+ }
+ rcu_read_unlock();
+
+out:
+ return err;
+}
+
+static struct sk_buff *ipv6_gso_segment(struct sk_buff *skb, int features)
+{
+ struct sk_buff *segs = ERR_PTR(-EINVAL);
+ struct ipv6hdr *ipv6h;
+ struct inet6_protocol *ops;
+
+ if (unlikely(skb_shinfo(skb)->gso_type &
+ ~(SKB_GSO_UDP |
+ SKB_GSO_DODGY |
+ SKB_GSO_TCP_ECN |
+ SKB_GSO_TCPV6 |
+ 0)))
+ goto out;
+
+ if (unlikely(!pskb_may_pull(skb, sizeof(*ipv6h))))
+ goto out;
+
+ ipv6h = skb->nh.ipv6h;
+ __skb_pull(skb, sizeof(*ipv6h));
+ segs = ERR_PTR(-EPROTONOSUPPORT);
+
+ rcu_read_lock();
+ ops = ipv6_gso_pull_exthdrs(skb, ipv6h->nexthdr);
+ if (likely(ops && ops->gso_segment)) {
+ skb->h.raw = skb->data;
+ segs = ops->gso_segment(skb, features);
+ }
rcu_read_unlock();
if (unlikely(IS_ERR(segs)))
static struct packet_type ipv6_packet_type = {
.type = __constant_htons(ETH_P_IPV6),
.func = ipv6_rcv,
+ .gso_send_check = ipv6_gso_send_check,
.gso_segment = ipv6_gso_segment,
};
}
}
+static int tcp_v6_gso_send_check(struct sk_buff *skb)
+{
+ struct ipv6hdr *ipv6h;
+ struct tcphdr *th;
+
+ if (!pskb_may_pull(skb, sizeof(*th)))
+ return -EINVAL;
+
+ ipv6h = skb->nh.ipv6h;
+ th = skb->h.th;
+
+ th->check = 0;
+ th->check = ~csum_ipv6_magic(&ipv6h->saddr, &ipv6h->daddr, skb->len,
+ IPPROTO_TCP, 0);
+ skb->csum = offsetof(struct tcphdr, check);
+ skb->ip_summed = CHECKSUM_HW;
+ return 0;
+}
static void tcp_v6_send_reset(struct sk_buff *skb)
{
static struct inet6_protocol tcpv6_protocol = {
.handler = tcp_v6_rcv,
.err_handler = tcp_v6_err,
+ .gso_send_check = tcp_v6_gso_send_check,
.gso_segment = tcp_tso_segment,
.flags = INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL,
};
{
struct sk_buff *segs;
- if (!skb_shinfo(skb)->gso_size)
+ if (!skb_is_gso(skb))
return xfrm6_output_finish2(skb);
skb->protocol = htons(ETH_P_IP);
static const struct proto_ops nr_proto_ops;
+/*
+ * NETROM network devices are virtual network devices encapsulating NETROM
+ * frames into AX.25 which will be sent through an AX.25 device, so form a
+ * special "super class" of normal net devices; split their locks off into a
+ * separate class since they always nest.
+ */
+static struct lock_class_key nr_netdev_xmit_lock_key;
+
/*
* Socket removal during an interrupt is now safe.
*/
nr_make->vl = 0;
nr_make->state = NR_STATE_3;
sk_acceptq_added(sk);
-
- nr_insert_socket(make);
-
skb_queue_head(&sk->sk_receive_queue, skb);
- nr_start_heartbeat(make);
- nr_start_idletimer(make);
-
if (!sock_flag(sk, SOCK_DEAD))
sk->sk_data_ready(sk, skb->len);
bh_unlock_sock(sk);
+
+ nr_insert_socket(make);
+
+ nr_start_heartbeat(make);
+ nr_start_idletimer(make);
+
return 1;
}
return -1;
}
- dev_nr = kmalloc(nr_ndevs * sizeof(struct net_device *), GFP_KERNEL);
+ dev_nr = kzalloc(nr_ndevs * sizeof(struct net_device *), GFP_KERNEL);
if (dev_nr == NULL) {
printk(KERN_ERR "NET/ROM: nr_proto_init - unable to allocate device array\n");
return -1;
}
- memset(dev_nr, 0x00, nr_ndevs * sizeof(struct net_device *));
-
for (i = 0; i < nr_ndevs; i++) {
char name[IFNAMSIZ];
struct net_device *dev;
free_netdev(dev);
goto fail;
}
+ lockdep_set_class(&dev->_xmit_lock, &nr_netdev_xmit_lock_key);
dev_nr[i] = dev;
}
if (sock_flag(sk, SOCK_DESTROY) ||
(sk->sk_state == TCP_LISTEN && sock_flag(sk, SOCK_DEAD))) {
sock_hold(sk);
- nr_destroy_socket(sk);
bh_unlock_sock(sk);
+ nr_destroy_socket(sk);
sock_put(sk);
return;
}
ax25_address rose_callsign;
+/*
+ * ROSE network devices are virtual network devices encapsulating ROSE
+ * frames into AX.25 which will be sent through an AX.25 device, so form a
+ * special "super class" of normal net devices; split their locks off into a
+ * separate class since they always nest.
+ */
+static struct lock_class_key rose_netdev_xmit_lock_key;
+
/*
* Convert a ROSE address into text.
*/
rose_callsign = null_ax25_address;
- dev_rose = kmalloc(rose_ndevs * sizeof(struct net_device *), GFP_KERNEL);
+ dev_rose = kzalloc(rose_ndevs * sizeof(struct net_device *), GFP_KERNEL);
if (dev_rose == NULL) {
printk(KERN_ERR "ROSE: rose_proto_init - unable to allocate device structure\n");
rc = -ENOMEM;
goto out_proto_unregister;
}
- memset(dev_rose, 0x00, rose_ndevs * sizeof(struct net_device*));
for (i = 0; i < rose_ndevs; i++) {
struct net_device *dev;
char name[IFNAMSIZ];
free_netdev(dev);
goto fail;
}
+ lockdep_set_class(&dev->_xmit_lock, &rose_netdev_xmit_lock_key);
dev_rose[i] = dev;
}
return err;
rtattr_failure:
- module_put(a->ops->owner);
nlmsg_failure:
+ module_put(a->ops->owner);
err_out:
kfree_skb(skb);
kfree(a);
link_p[RTM_GETACTION-RTM_BASE].dumpit = tc_dump_action;
}
- printk("TC classifier action (bugs to netdev@vger.kernel.org cc "
- "hadi@cyberus.ca)\n");
return 0;
}
struct qdisc_rate_table *rate; /* rate table of the class itself */
struct qdisc_rate_table *ceil; /* ceiling rate (limits borrows too) */
long buffer,cbuffer; /* token bucket depth/rate */
- long mbuffer; /* max wait time */
+ psched_tdiff_t mbuffer; /* max wait time */
long tokens,ctokens; /* current number of tokens */
psched_time_t t_c; /* checkpoint time */
};
/* set class to be in HTB_CAN_SEND state */
cl->tokens = hopt->buffer;
cl->ctokens = hopt->cbuffer;
- cl->mbuffer = 60000000; /* 1min */
+ cl->mbuffer = PSCHED_JIFFIE2US(HZ*60); /* 1min */
PSCHED_GET_TIME(cl->t_c);
cl->cmode = HTB_CAN_SEND;
sbsec->sb = sb;
sbsec->sid = SECINITSID_UNLABELED;
sbsec->def_sid = SECINITSID_FILE;
+ sbsec->mntpoint_sid = SECINITSID_UNLABELED;
sb->s_security = sbsec;
return 0;
Opt_context = 1,
Opt_fscontext = 2,
Opt_defcontext = 4,
+ Opt_rootcontext = 8,
};
static match_table_t tokens = {
{Opt_context, "context=%s"},
{Opt_fscontext, "fscontext=%s"},
{Opt_defcontext, "defcontext=%s"},
+ {Opt_rootcontext, "rootcontext=%s"},
};
#define SEL_MOUNT_FAIL_MSG "SELinux: duplicate or incompatible mount options\n"
+static int may_context_mount_sb_relabel(u32 sid,
+ struct superblock_security_struct *sbsec,
+ struct task_security_struct *tsec)
+{
+ int rc;
+
+ rc = avc_has_perm(tsec->sid, sbsec->sid, SECCLASS_FILESYSTEM,
+ FILESYSTEM__RELABELFROM, NULL);
+ if (rc)
+ return rc;
+
+ rc = avc_has_perm(tsec->sid, sid, SECCLASS_FILESYSTEM,
+ FILESYSTEM__RELABELTO, NULL);
+ return rc;
+}
+
+static int may_context_mount_inode_relabel(u32 sid,
+ struct superblock_security_struct *sbsec,
+ struct task_security_struct *tsec)
+{
+ int rc;
+ rc = avc_has_perm(tsec->sid, sbsec->sid, SECCLASS_FILESYSTEM,
+ FILESYSTEM__RELABELFROM, NULL);
+ if (rc)
+ return rc;
+
+ rc = avc_has_perm(sid, sbsec->sid, SECCLASS_FILESYSTEM,
+ FILESYSTEM__ASSOCIATE, NULL);
+ return rc;
+}
+
static int try_context_mount(struct super_block *sb, void *data)
{
char *context = NULL, *defcontext = NULL;
+ char *fscontext = NULL, *rootcontext = NULL;
const char *name;
u32 sid;
int alloc = 0, rc = 0, seen = 0;
switch (token) {
case Opt_context:
- if (seen) {
+ if (seen & (Opt_context|Opt_defcontext)) {
rc = -EINVAL;
printk(KERN_WARNING SEL_MOUNT_FAIL_MSG);
goto out_free;
break;
case Opt_fscontext:
- if (seen & (Opt_context|Opt_fscontext)) {
+ if (seen & Opt_fscontext) {
rc = -EINVAL;
printk(KERN_WARNING SEL_MOUNT_FAIL_MSG);
goto out_free;
}
- context = match_strdup(&args[0]);
- if (!context) {
+ fscontext = match_strdup(&args[0]);
+ if (!fscontext) {
rc = -ENOMEM;
goto out_free;
}
seen |= Opt_fscontext;
break;
+ case Opt_rootcontext:
+ if (seen & Opt_rootcontext) {
+ rc = -EINVAL;
+ printk(KERN_WARNING SEL_MOUNT_FAIL_MSG);
+ goto out_free;
+ }
+ rootcontext = match_strdup(&args[0]);
+ if (!rootcontext) {
+ rc = -ENOMEM;
+ goto out_free;
+ }
+ if (!alloc)
+ alloc = 1;
+ seen |= Opt_rootcontext;
+ break;
+
case Opt_defcontext:
if (sbsec->behavior != SECURITY_FS_USE_XATTR) {
rc = -EINVAL;
if (!seen)
goto out;
+ /* sets the context of the superblock for the fs being mounted. */
+ if (fscontext) {
+ rc = security_context_to_sid(fscontext, strlen(fscontext), &sid);
+ if (rc) {
+ printk(KERN_WARNING "SELinux: security_context_to_sid"
+ "(%s) failed for (dev %s, type %s) errno=%d\n",
+ fscontext, sb->s_id, name, rc);
+ goto out_free;
+ }
+
+ rc = may_context_mount_sb_relabel(sid, sbsec, tsec);
+ if (rc)
+ goto out_free;
+
+ sbsec->sid = sid;
+ }
+
+ /*
+ * Switch to using mount point labeling behavior.
+ * sets the label used on all file below the mountpoint, and will set
+ * the superblock context if not already set.
+ */
if (context) {
rc = security_context_to_sid(context, strlen(context), &sid);
if (rc) {
goto out_free;
}
- rc = avc_has_perm(tsec->sid, sbsec->sid, SECCLASS_FILESYSTEM,
- FILESYSTEM__RELABELFROM, NULL);
- if (rc)
+ if (!fscontext) {
+ rc = may_context_mount_sb_relabel(sid, sbsec, tsec);
+ if (rc)
+ goto out_free;
+ sbsec->sid = sid;
+ } else {
+ rc = may_context_mount_inode_relabel(sid, sbsec, tsec);
+ if (rc)
+ goto out_free;
+ }
+ sbsec->mntpoint_sid = sid;
+
+ sbsec->behavior = SECURITY_FS_USE_MNTPOINT;
+ }
+
+ if (rootcontext) {
+ struct inode *inode = sb->s_root->d_inode;
+ struct inode_security_struct *isec = inode->i_security;
+ rc = security_context_to_sid(rootcontext, strlen(rootcontext), &sid);
+ if (rc) {
+ printk(KERN_WARNING "SELinux: security_context_to_sid"
+ "(%s) failed for (dev %s, type %s) errno=%d\n",
+ rootcontext, sb->s_id, name, rc);
goto out_free;
+ }
- rc = avc_has_perm(tsec->sid, sid, SECCLASS_FILESYSTEM,
- FILESYSTEM__RELABELTO, NULL);
+ rc = may_context_mount_inode_relabel(sid, sbsec, tsec);
if (rc)
goto out_free;
- sbsec->sid = sid;
-
- if (seen & Opt_context)
- sbsec->behavior = SECURITY_FS_USE_MNTPOINT;
+ isec->sid = sid;
+ isec->initialized = 1;
}
if (defcontext) {
if (sid == sbsec->def_sid)
goto out_free;
- rc = avc_has_perm(tsec->sid, sbsec->sid, SECCLASS_FILESYSTEM,
- FILESYSTEM__RELABELFROM, NULL);
- if (rc)
- goto out_free;
-
- rc = avc_has_perm(sid, sbsec->sid, SECCLASS_FILESYSTEM,
- FILESYSTEM__ASSOCIATE, NULL);
+ rc = may_context_mount_inode_relabel(sid, sbsec, tsec);
if (rc)
goto out_free;
if (alloc) {
kfree(context);
kfree(defcontext);
+ kfree(fscontext);
+ kfree(rootcontext);
}
out:
return rc;
goto out;
isec->sid = sid;
break;
+ case SECURITY_FS_USE_MNTPOINT:
+ isec->sid = sbsec->mntpoint_sid;
+ break;
default:
- /* Default to the fs SID. */
+ /* Default to the fs superblock SID. */
isec->sid = sbsec->sid;
if (sbsec->proc) {
{
return (match_prefix("context=", sizeof("context=")-1, option, len) ||
match_prefix("fscontext=", sizeof("fscontext=")-1, option, len) ||
- match_prefix("defcontext=", sizeof("defcontext=")-1, option, len));
+ match_prefix("defcontext=", sizeof("defcontext=")-1, option, len) ||
+ match_prefix("rootcontext=", sizeof("rootcontext=")-1, option, len));
}
static inline void take_option(char **to, char *from, int *first, int len)
struct superblock_security_struct {
struct super_block *sb; /* back pointer to sb object */
struct list_head list; /* list of superblock_security_struct */
- u32 sid; /* SID of file system */
+ u32 sid; /* SID of file system superblock */
u32 def_sid; /* default SID for labeling */
+ u32 mntpoint_sid; /* SECURITY_FS_USE_MNTPOINT context for files */
unsigned int behavior; /* labeling behavior */
unsigned char initialized; /* initialization flag */
unsigned char proc; /* proc fs */
obj-$(CONFIG_SND_AOA) += core/
-obj-$(CONFIG_SND_AOA) += codecs/
-obj-$(CONFIG_SND_AOA) += fabrics/
obj-$(CONFIG_SND_AOA_SOUNDBUS) += soundbus/
+obj-$(CONFIG_SND_AOA) += fabrics/
+obj-$(CONFIG_SND_AOA) += codecs/
--- /dev/null
+/*
+ * This file is only included exactly once!
+ *
+ * The tables here are derived from the tas3004 datasheet,
+ * modulo typo corrections and some smoothing...
+ */
+
+#define TAS3004_TREBLE_MIN 0
+#define TAS3004_TREBLE_MAX 72
+#define TAS3004_BASS_MIN 0
+#define TAS3004_BASS_MAX 72
+#define TAS3004_TREBLE_ZERO 36
+#define TAS3004_BASS_ZERO 36
+
+static u8 tas3004_treble_table[] = {
+ 150, /* -18 dB */
+ 149,
+ 148,
+ 147,
+ 146,
+ 145,
+ 144,
+ 143,
+ 142,
+ 141,
+ 140,
+ 139,
+ 138,
+ 137,
+ 136,
+ 135,
+ 134,
+ 133,
+ 132,
+ 131,
+ 130,
+ 129,
+ 128,
+ 127,
+ 126,
+ 125,
+ 124,
+ 123,
+ 122,
+ 121,
+ 120,
+ 119,
+ 118,
+ 117,
+ 116,
+ 115,
+ 114, /* 0 dB */
+ 113,
+ 112,
+ 111,
+ 109,
+ 108,
+ 107,
+ 105,
+ 104,
+ 103,
+ 101,
+ 99,
+ 98,
+ 96,
+ 93,
+ 91,
+ 89,
+ 86,
+ 83,
+ 81,
+ 77,
+ 74,
+ 71,
+ 67,
+ 63,
+ 59,
+ 54,
+ 49,
+ 44,
+ 38,
+ 32,
+ 26,
+ 19,
+ 10,
+ 4,
+ 2,
+ 1, /* +18 dB */
+};
+
+static inline u8 tas3004_treble(int idx)
+{
+ return tas3004_treble_table[idx];
+}
+
+/* I only save the difference here to the treble table
+ * so that the binary is smaller...
+ * I have also ignored completely differences of
+ * +/- 1
+ */
+static s8 tas3004_bass_diff_to_treble[] = {
+ 2, /* 7 dB, offset 50 */
+ 2,
+ 2,
+ 2,
+ 2,
+ 1,
+ 2,
+ 2,
+ 2,
+ 3,
+ 4,
+ 4,
+ 5,
+ 6,
+ 7,
+ 8,
+ 9,
+ 10,
+ 11,
+ 14,
+ 13,
+ 8,
+ 1, /* 18 dB */
+};
+
+static inline u8 tas3004_bass(int idx)
+{
+ u8 result = tas3004_treble_table[idx];
+
+ if (idx >= 50)
+ result += tas3004_bass_diff_to_treble[idx-50];
+ return result;
+}
#include "snd-aoa-codec-tas.h"
#include "snd-aoa-codec-tas-gain-table.h"
+#include "snd-aoa-codec-tas-basstreble.h"
#include "../aoa.h"
#include "../soundbus/soundbus.h"
-
#define PFX "snd-aoa-codec-tas: "
+
struct tas {
struct aoa_codec codec;
struct i2c_client i2c;
- u32 muted_l:1, muted_r:1,
- controls_created:1;
+ u32 mute_l:1, mute_r:1 ,
+ controls_created:1 ,
+ drc_enabled:1,
+ hw_enabled:1;
u8 cached_volume_l, cached_volume_r;
u8 mixer_l[3], mixer_r[3];
+ u8 bass, treble;
u8 acr;
+ int drc_range;
};
+static int tas_reset_init(struct tas *tas);
+
static struct tas *codec_to_tas(struct aoa_codec *codec)
{
return container_of(codec, struct tas, codec);
return i2c_smbus_write_i2c_block_data(&tas->i2c, reg, len, data);
}
+static void tas3004_set_drc(struct tas *tas)
+{
+ unsigned char val[6];
+
+ if (tas->drc_enabled)
+ val[0] = 0x50; /* 3:1 above threshold */
+ else
+ val[0] = 0x51; /* disabled */
+ val[1] = 0x02; /* 1:1 below threshold */
+ if (tas->drc_range > 0xef)
+ val[2] = 0xef;
+ else if (tas->drc_range < 0)
+ val[2] = 0x00;
+ else
+ val[2] = tas->drc_range;
+ val[3] = 0xb0;
+ val[4] = 0x60;
+ val[5] = 0xa0;
+
+ tas_write_reg(tas, TAS_REG_DRC, 6, val);
+}
+
+static void tas_set_treble(struct tas *tas)
+{
+ u8 tmp;
+
+ tmp = tas3004_treble(tas->treble);
+ tas_write_reg(tas, TAS_REG_TREBLE, 1, &tmp);
+}
+
+static void tas_set_bass(struct tas *tas)
+{
+ u8 tmp;
+
+ tmp = tas3004_bass(tas->bass);
+ tas_write_reg(tas, TAS_REG_BASS, 1, &tmp);
+}
+
static void tas_set_volume(struct tas *tas)
{
u8 block[6];
if (left > 177) left = 177;
if (right > 177) right = 177;
- if (tas->muted_l) left = 0;
- if (tas->muted_r) right = 0;
+ if (tas->mute_l) left = 0;
+ if (tas->mute_r) right = 0;
/* analysing the volume and mixer tables shows
* that they are similar enough when we shift
tas->cached_volume_l = ucontrol->value.integer.value[0];
tas->cached_volume_r = ucontrol->value.integer.value[1];
- tas_set_volume(tas);
+ if (tas->hw_enabled)
+ tas_set_volume(tas);
return 1;
}
{
struct tas *tas = snd_kcontrol_chip(kcontrol);
- ucontrol->value.integer.value[0] = !tas->muted_l;
- ucontrol->value.integer.value[1] = !tas->muted_r;
+ ucontrol->value.integer.value[0] = !tas->mute_l;
+ ucontrol->value.integer.value[1] = !tas->mute_r;
return 0;
}
{
struct tas *tas = snd_kcontrol_chip(kcontrol);
- if (tas->muted_l == !ucontrol->value.integer.value[0]
- && tas->muted_r == !ucontrol->value.integer.value[1])
+ if (tas->mute_l == !ucontrol->value.integer.value[0]
+ && tas->mute_r == !ucontrol->value.integer.value[1])
return 0;
- tas->muted_l = !ucontrol->value.integer.value[0];
- tas->muted_r = !ucontrol->value.integer.value[1];
- tas_set_volume(tas);
+ tas->mute_l = !ucontrol->value.integer.value[0];
+ tas->mute_r = !ucontrol->value.integer.value[1];
+ if (tas->hw_enabled)
+ tas_set_volume(tas);
return 1;
}
tas->mixer_l[idx] = ucontrol->value.integer.value[0];
tas->mixer_r[idx] = ucontrol->value.integer.value[1];
- tas_set_mixer(tas);
+ if (tas->hw_enabled)
+ tas_set_mixer(tas);
return 1;
}
.private_value = idx, \
}
-MIXER_CONTROL(pcm1, "PCM1", 0);
+MIXER_CONTROL(pcm1, "PCM", 0);
MIXER_CONTROL(monitor, "Monitor", 2);
+static int tas_snd_drc_range_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = TAS3004_DRC_MAX;
+ return 0;
+}
+
+static int tas_snd_drc_range_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct tas *tas = snd_kcontrol_chip(kcontrol);
+
+ ucontrol->value.integer.value[0] = tas->drc_range;
+ return 0;
+}
+
+static int tas_snd_drc_range_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct tas *tas = snd_kcontrol_chip(kcontrol);
+
+ if (tas->drc_range == ucontrol->value.integer.value[0])
+ return 0;
+
+ tas->drc_range = ucontrol->value.integer.value[0];
+ if (tas->hw_enabled)
+ tas3004_set_drc(tas);
+ return 1;
+}
+
+static struct snd_kcontrol_new drc_range_control = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "DRC Range",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = tas_snd_drc_range_info,
+ .get = tas_snd_drc_range_get,
+ .put = tas_snd_drc_range_put,
+};
+
+static int tas_snd_drc_switch_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ return 0;
+}
+
+static int tas_snd_drc_switch_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct tas *tas = snd_kcontrol_chip(kcontrol);
+
+ ucontrol->value.integer.value[0] = tas->drc_enabled;
+ return 0;
+}
+
+static int tas_snd_drc_switch_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct tas *tas = snd_kcontrol_chip(kcontrol);
+
+ if (tas->drc_enabled == ucontrol->value.integer.value[0])
+ return 0;
+
+ tas->drc_enabled = ucontrol->value.integer.value[0];
+ if (tas->hw_enabled)
+ tas3004_set_drc(tas);
+ return 1;
+}
+
+static struct snd_kcontrol_new drc_switch_control = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "DRC Range Switch",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = tas_snd_drc_switch_info,
+ .get = tas_snd_drc_switch_get,
+ .put = tas_snd_drc_switch_put,
+};
+
static int tas_snd_capture_source_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
tas->acr |= TAS_ACR_INPUT_B;
if (oldacr == tas->acr)
return 0;
- tas_write_reg(tas, TAS_REG_ACR, 1, &tas->acr);
+ if (tas->hw_enabled)
+ tas_write_reg(tas, TAS_REG_ACR, 1, &tas->acr);
return 1;
}
.put = tas_snd_capture_source_put,
};
+static int tas_snd_treble_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = TAS3004_TREBLE_MIN;
+ uinfo->value.integer.max = TAS3004_TREBLE_MAX;
+ return 0;
+}
+
+static int tas_snd_treble_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct tas *tas = snd_kcontrol_chip(kcontrol);
+
+ ucontrol->value.integer.value[0] = tas->treble;
+ return 0;
+}
+
+static int tas_snd_treble_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct tas *tas = snd_kcontrol_chip(kcontrol);
+
+ if (tas->treble == ucontrol->value.integer.value[0])
+ return 0;
+
+ tas->treble = ucontrol->value.integer.value[0];
+ if (tas->hw_enabled)
+ tas_set_treble(tas);
+ return 1;
+}
+
+static struct snd_kcontrol_new treble_control = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Treble",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = tas_snd_treble_info,
+ .get = tas_snd_treble_get,
+ .put = tas_snd_treble_put,
+};
+
+static int tas_snd_bass_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = TAS3004_BASS_MIN;
+ uinfo->value.integer.max = TAS3004_BASS_MAX;
+ return 0;
+}
+
+static int tas_snd_bass_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct tas *tas = snd_kcontrol_chip(kcontrol);
+
+ ucontrol->value.integer.value[0] = tas->bass;
+ return 0;
+}
+
+static int tas_snd_bass_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct tas *tas = snd_kcontrol_chip(kcontrol);
+
+ if (tas->bass == ucontrol->value.integer.value[0])
+ return 0;
+
+ tas->bass = ucontrol->value.integer.value[0];
+ if (tas->hw_enabled)
+ tas_set_bass(tas);
+ return 1;
+}
+
+static struct snd_kcontrol_new bass_control = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Bass",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = tas_snd_bass_info,
+ .get = tas_snd_bass_get,
+ .put = tas_snd_bass_put,
+};
static struct transfer_info tas_transfers[] = {
{
static int tas_reset_init(struct tas *tas)
{
u8 tmp;
+
+ tas->codec.gpio->methods->all_amps_off(tas->codec.gpio);
+ msleep(5);
tas->codec.gpio->methods->set_hw_reset(tas->codec.gpio, 0);
- msleep(1);
+ msleep(5);
tas->codec.gpio->methods->set_hw_reset(tas->codec.gpio, 1);
- msleep(1);
+ msleep(20);
tas->codec.gpio->methods->set_hw_reset(tas->codec.gpio, 0);
- msleep(1);
-
- tas->acr &= ~TAS_ACR_ANALOG_PDOWN;
- tas->acr |= TAS_ACR_B_MONAUREAL | TAS_ACR_B_MON_SEL_RIGHT;
- if (tas_write_reg(tas, TAS_REG_ACR, 1, &tas->acr))
- return -ENODEV;
+ msleep(10);
+ tas->codec.gpio->methods->all_amps_restore(tas->codec.gpio);
tmp = TAS_MCS_SCLK64 | TAS_MCS_SPORT_MODE_I2S | TAS_MCS_SPORT_WL_24BIT;
if (tas_write_reg(tas, TAS_REG_MCS, 1, &tmp))
return -ENODEV;
+ tas->acr |= TAS_ACR_ANALOG_PDOWN | TAS_ACR_B_MONAUREAL |
+ TAS_ACR_B_MON_SEL_RIGHT;
+ if (tas_write_reg(tas, TAS_REG_ACR, 1, &tas->acr))
+ return -ENODEV;
+
tmp = 0;
if (tas_write_reg(tas, TAS_REG_MCS2, 1, &tmp))
return -ENODEV;
+ tas3004_set_drc(tas);
+
+ /* Set treble & bass to 0dB */
+ tas->treble = TAS3004_TREBLE_ZERO;
+ tas->bass = TAS3004_BASS_ZERO;
+ tas_set_treble(tas);
+ tas_set_bass(tas);
+
+ tas->acr &= ~TAS_ACR_ANALOG_PDOWN;
+ if (tas_write_reg(tas, TAS_REG_ACR, 1, &tas->acr))
+ return -ENODEV;
+
+ return 0;
+}
+
+static int tas_switch_clock(struct codec_info_item *cii, enum clock_switch clock)
+{
+ struct tas *tas = cii->codec_data;
+
+ switch(clock) {
+ case CLOCK_SWITCH_PREPARE_SLAVE:
+ /* Clocks are going away, mute mute mute */
+ tas->codec.gpio->methods->all_amps_off(tas->codec.gpio);
+ tas->hw_enabled = 0;
+ break;
+ case CLOCK_SWITCH_SLAVE:
+ /* Clocks are back, re-init the codec */
+ tas_reset_init(tas);
+ tas_set_volume(tas);
+ tas_set_mixer(tas);
+ tas->hw_enabled = 1;
+ tas->codec.gpio->methods->all_amps_restore(tas->codec.gpio);
+ break;
+ default:
+ /* doesn't happen as of now */
+ return -EINVAL;
+ }
return 0;
}
* our i2c device is suspended, and then take note of that! */
static int tas_suspend(struct tas *tas)
{
+ tas->hw_enabled = 0;
tas->acr |= TAS_ACR_ANALOG_PDOWN;
tas_write_reg(tas, TAS_REG_ACR, 1, &tas->acr);
return 0;
tas_reset_init(tas);
tas_set_volume(tas);
tas_set_mixer(tas);
+ tas->hw_enabled = 1;
return 0;
}
.bus_factor = 64,
.owner = THIS_MODULE,
.usable = tas_usable,
+ .switch_clock = tas_switch_clock,
#ifdef CONFIG_PM
.suspend = _tas_suspend,
.resume = _tas_resume,
printk(KERN_ERR PFX "tas failed to initialise\n");
return -ENXIO;
}
+ tas->hw_enabled = 1;
if (tas->codec.soundbus_dev->attach_codec(tas->codec.soundbus_dev,
aoa_get_card(),
if (err)
goto error;
+ err = aoa_snd_ctl_add(snd_ctl_new1(&drc_range_control, tas));
+ if (err)
+ goto error;
+
+ err = aoa_snd_ctl_add(snd_ctl_new1(&drc_switch_control, tas));
+ if (err)
+ goto error;
+
+ err = aoa_snd_ctl_add(snd_ctl_new1(&treble_control, tas));
+ if (err)
+ goto error;
+
+ err = aoa_snd_ctl_add(snd_ctl_new1(&bass_control, tas));
+ if (err)
+ goto error;
+
return 0;
error:
tas->codec.soundbus_dev->detach_codec(tas->codec.soundbus_dev, tas);
tas->i2c.driver = &tas_driver;
tas->i2c.adapter = adapter;
tas->i2c.addr = addr;
+ /* seems that half is a saner default */
+ tas->drc_range = TAS3004_DRC_MAX / 2;
strlcpy(tas->i2c.name, "tas audio codec", I2C_NAME_SIZE-1);
if (i2c_attach_client(&tas->i2c)) {
if (aoa_codec_register(&tas->codec)) {
goto detach;
}
- printk(KERN_DEBUG "snd-aoa-codec-tas: created and attached tas instance\n");
+ printk(KERN_DEBUG
+ "snd-aoa-codec-tas: tas found, addr 0x%02x on %s\n",
+ addr, node->full_name);
return 0;
detach:
i2c_detach_client(&tas->i2c);
#define TAS_REG_LEFT_BIQUAD6 0x10
#define TAS_REG_RIGHT_BIQUAD6 0x19
+#define TAS_REG_LEFT_LOUDNESS 0x21
+#define TAS_REG_RIGHT_LOUDNESS 0x22
+#define TAS_REG_LEFT_LOUDNESS_GAIN 0x23
+#define TAS_REG_RIGHT_LOUDNESS_GAIN 0x24
+
+#define TAS3001_DRC_MAX 0x5f
+#define TAS3004_DRC_MAX 0xef
+
#endif /* __SND_AOA_CODECTASH */
static void pmf_gpio_set_##name(struct gpio_runtime *rt, int on)\
{ \
struct pmf_args args = { .count = 1, .u[0].v = !on }; \
- \
+ int rc; \
+ \
if (unlikely(!rt)) return; \
- pmf_call_function(rt->node, #name "-mute", &args); \
+ rc = pmf_call_function(rt->node, #name "-mute", &args); \
+ if (rc) \
+ printk(KERN_WARNING "pmf_gpio_set_" #name \
+ " failed, rc: %d\n", rc); \
rt->implementation_private &= ~(1<<bit); \
rt->implementation_private |= (!!on << bit); \
} \
static void pmf_gpio_set_hw_reset(struct gpio_runtime *rt, int on)
{
struct pmf_args args = { .count = 1, .u[0].v = !!on };
+ int rc;
if (unlikely(!rt)) return;
- pmf_call_function(rt->node, "hw-reset", &args);
+ rc = pmf_call_function(rt->node, "hw-reset", &args);
+ if (rc)
+ printk(KERN_WARNING "pmf_gpio_set_hw_reset"
+ " failed, rc: %d\n", rc);
}
static void pmf_gpio_all_amps_off(struct gpio_runtime *rt)
int pcmid;
};
+MODULE_ALIAS("sound-layout-36");
MODULE_ALIAS("sound-layout-41");
MODULE_ALIAS("sound-layout-45");
+MODULE_ALIAS("sound-layout-47");
+MODULE_ALIAS("sound-layout-48");
+MODULE_ALIAS("sound-layout-49");
+MODULE_ALIAS("sound-layout-50");
MODULE_ALIAS("sound-layout-51");
+MODULE_ALIAS("sound-layout-56");
+MODULE_ALIAS("sound-layout-57");
MODULE_ALIAS("sound-layout-58");
MODULE_ALIAS("sound-layout-60");
MODULE_ALIAS("sound-layout-61");
+MODULE_ALIAS("sound-layout-62");
MODULE_ALIAS("sound-layout-64");
MODULE_ALIAS("sound-layout-65");
+MODULE_ALIAS("sound-layout-66");
+MODULE_ALIAS("sound-layout-67");
MODULE_ALIAS("sound-layout-68");
MODULE_ALIAS("sound-layout-69");
MODULE_ALIAS("sound-layout-70");
MODULE_ALIAS("sound-layout-72");
+MODULE_ALIAS("sound-layout-76");
MODULE_ALIAS("sound-layout-80");
MODULE_ALIAS("sound-layout-82");
MODULE_ALIAS("sound-layout-84");
MODULE_ALIAS("sound-layout-86");
+MODULE_ALIAS("sound-layout-90");
MODULE_ALIAS("sound-layout-92");
+MODULE_ALIAS("sound-layout-94");
MODULE_ALIAS("sound-layout-96");
+MODULE_ALIAS("sound-layout-98");
+MODULE_ALIAS("sound-layout-100");
/* onyx with all but microphone connected */
static struct codec_connection onyx_connections_nomic[] = {
layout_id = (unsigned int *) get_property(sound, "layout-id", NULL);
if (!layout_id)
goto outnodev;
- printk(KERN_INFO "snd-aoa-fabric-layout: found bus with layout %d ", *layout_id);
+ printk(KERN_INFO "snd-aoa-fabric-layout: found bus with layout %d\n",
+ *layout_id);
layout = find_layout_by_id(*layout_id);
if (!layout) {
- printk("(no idea how to handle)\n");
+ printk(KERN_ERR "snd-aoa-fabric-layout: unknown layout\n");
goto outnodev;
}
case 51: /* PowerBook5,4 */
case 58: /* Mac Mini */
ldev->gpio.methods = ftr_gpio_methods;
+ printk(KERN_DEBUG
+ "snd-aoa-fabric-layout: Using direct GPIOs\n");
break;
default:
ldev->gpio.methods = pmf_gpio_methods;
+ printk(KERN_DEBUG
+ "snd-aoa-fabric-layout: Using PMF GPIOs\n");
}
ldev->selfptr_headphone.ptr = ldev;
ldev->selfptr_lineout.ptr = ldev;
sdev->ofdev.dev.driver_data = ldev;
-
- printk("(using)\n");
list_add(&ldev->list, &layouts_list);
layouts_list_items++;
.dev_attrs = soundbus_dev_attrs,
};
-static int __init soundbus_init(void)
-{
- return bus_register(&soundbus_bus_type);
-}
-
-static void __exit soundbus_exit(void)
-{
- bus_unregister(&soundbus_bus_type);
-}
-
int soundbus_add_one(struct soundbus_dev *dev)
{
static int devcount;
}
EXPORT_SYMBOL_GPL(soundbus_unregister_driver);
-module_init(soundbus_init);
+static int __init soundbus_init(void)
+{
+ return bus_register(&soundbus_bus_type);
+}
+
+static void __exit soundbus_exit(void)
+{
+ bus_unregister(&soundbus_bus_type);
+}
+
+subsys_initcall(soundbus_init);
module_exit(soundbus_exit);
* GPL v2, can be found in COPYING.
*/
-#include <asm/io.h>
+#include <linux/kernel.h>
#include <linux/delay.h>
+
+#include <asm/io.h>
#include <asm/prom.h>
#include <asm/macio.h>
#include <asm/pmac_feature.h>
#include <asm/pmac_pfunc.h>
+#include <asm/keylargo.h>
+
#include "i2sbus.h"
int i2sbus_control_init(struct macio_dev* dev, struct i2sbus_control **c)
INIT_LIST_HEAD(&(*c)->list);
- if (of_address_to_resource(dev->ofdev.node, 0, &(*c)->rsrc))
- goto err;
- /* we really should be using feature calls instead of mapping
- * these registers. It's safe for now since no one else is
- * touching them... */
- (*c)->controlregs = ioremap((*c)->rsrc.start,
- sizeof(struct i2s_control_regs));
- if (!(*c)->controlregs)
- goto err;
-
+ (*c)->macio = dev->bus->chip;
return 0;
- err:
- kfree(*c);
- *c = NULL;
- return -ENODEV;
}
void i2sbus_control_destroy(struct i2sbus_control *c)
{
- iounmap(c->controlregs);
kfree(c);
}
struct i2sbus_dev *i2sdev)
{
struct pmf_args args = { .count = 0 };
- int cc;
+ struct macio_chip *macio = c->macio;
if (i2sdev->enable)
return pmf_call_one(i2sdev->enable, &args);
+ if (macio == NULL || macio->base == NULL)
+ return -ENODEV;
+
switch (i2sdev->bus_number) {
case 0:
- cc = in_le32(&c->controlregs->cell_control);
- out_le32(&c->controlregs->cell_control, cc | CTRL_CLOCK_INTF_0_ENABLE);
+ /* these need to be locked or done through
+ * newly created feature calls! */
+ MACIO_BIS(KEYLARGO_FCR1, KL1_I2S0_ENABLE);
break;
case 1:
- cc = in_le32(&c->controlregs->cell_control);
- out_le32(&c->controlregs->cell_control, cc | CTRL_CLOCK_INTF_1_ENABLE);
+ MACIO_BIS(KEYLARGO_FCR1, KL1_I2S1_ENABLE);
break;
default:
return -ENODEV;
int enable)
{
struct pmf_args args = { .count = 0 };
- int cc;
+ struct macio_chip *macio = c->macio;
switch (enable) {
case 0:
printk(KERN_ERR "i2sbus: INVALID CELL ENABLE VALUE\n");
return -ENODEV;
}
+
+ if (macio == NULL || macio->base == NULL)
+ return -ENODEV;
+
switch (i2sdev->bus_number) {
case 0:
- cc = in_le32(&c->controlregs->cell_control);
- cc &= ~CTRL_CLOCK_CELL_0_ENABLE;
- cc |= enable * CTRL_CLOCK_CELL_0_ENABLE;
- out_le32(&c->controlregs->cell_control, cc);
+ if (enable)
+ MACIO_BIS(KEYLARGO_FCR1, KL1_I2S0_CELL_ENABLE);
+ else
+ MACIO_BIC(KEYLARGO_FCR1, KL1_I2S0_CELL_ENABLE);
break;
case 1:
- cc = in_le32(&c->controlregs->cell_control);
- cc &= ~CTRL_CLOCK_CELL_1_ENABLE;
- cc |= enable * CTRL_CLOCK_CELL_1_ENABLE;
- out_le32(&c->controlregs->cell_control, cc);
+ if (enable)
+ MACIO_BIS(KEYLARGO_FCR1, KL1_I2S1_CELL_ENABLE);
+ else
+ MACIO_BIC(KEYLARGO_FCR1, KL1_I2S1_CELL_ENABLE);
break;
default:
return -ENODEV;
int enable)
{
struct pmf_args args = { .count = 0 };
- int cc;
+ struct macio_chip *macio = c->macio;
switch (enable) {
case 0:
printk(KERN_ERR "i2sbus: INVALID CLOCK ENABLE VALUE\n");
return -ENODEV;
}
+
+ if (macio == NULL || macio->base == NULL)
+ return -ENODEV;
+
switch (i2sdev->bus_number) {
case 0:
- cc = in_le32(&c->controlregs->cell_control);
- cc &= ~CTRL_CLOCK_CLOCK_0_ENABLE;
- cc |= enable * CTRL_CLOCK_CLOCK_0_ENABLE;
- out_le32(&c->controlregs->cell_control, cc);
+ if (enable)
+ MACIO_BIS(KEYLARGO_FCR1, KL1_I2S0_CLK_ENABLE_BIT);
+ else
+ MACIO_BIC(KEYLARGO_FCR1, KL1_I2S0_CLK_ENABLE_BIT);
break;
case 1:
- cc = in_le32(&c->controlregs->cell_control);
- cc &= ~CTRL_CLOCK_CLOCK_1_ENABLE;
- cc |= enable * CTRL_CLOCK_CLOCK_1_ENABLE;
- out_le32(&c->controlregs->cell_control, cc);
+ if (enable)
+ MACIO_BIS(KEYLARGO_FCR1, KL1_I2S1_CLK_ENABLE_BIT);
+ else
+ MACIO_BIC(KEYLARGO_FCR1, KL1_I2S1_CLK_ENABLE_BIT);
break;
default:
return -ENODEV;
+++ /dev/null
-/*
- * i2sbus driver -- bus register definitions
- *
- * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
- *
- * GPL v2, can be found in COPYING.
- */
-#ifndef __I2SBUS_CONTROLREGS_H
-#define __I2SBUS_CONTROLREGS_H
-
-/* i2s control registers, at least what we know about them */
-
-#define __PAD(m,n) u8 __pad##m[n]
-#define _PAD(line, n) __PAD(line, n)
-#define PAD(n) _PAD(__LINE__, (n))
-struct i2s_control_regs {
- PAD(0x38);
- __le32 fcr0; /* 0x38 (unknown) */
- __le32 cell_control; /* 0x3c (fcr1) */
- __le32 fcr2; /* 0x40 (unknown) */
- __le32 fcr3; /* 0x44 (fcr3) */
- __le32 clock_control; /* 0x48 (unknown) */
- PAD(4);
- /* total size: 0x50 bytes */
-} __attribute__((__packed__));
-
-#define CTRL_CLOCK_CELL_0_ENABLE (1<<10)
-#define CTRL_CLOCK_CLOCK_0_ENABLE (1<<12)
-#define CTRL_CLOCK_SWRESET_0 (1<<11)
-#define CTRL_CLOCK_INTF_0_ENABLE (1<<13)
-
-#define CTRL_CLOCK_CELL_1_ENABLE (1<<17)
-#define CTRL_CLOCK_CLOCK_1_ENABLE (1<<18)
-#define CTRL_CLOCK_SWRESET_1 (1<<19)
-#define CTRL_CLOCK_INTF_1_ENABLE (1<<20)
-
-#endif /* __I2SBUS_CONTROLREGS_H */
*/
#include <linux/module.h>
-#include <asm/macio.h>
-#include <asm/dbdma.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+
#include <sound/driver.h>
#include <sound/core.h>
-#include <linux/dma-mapping.h>
+
+#include <asm/macio.h>
+#include <asm/dbdma.h>
+
#include "../soundbus.h"
#include "i2sbus.h"
* string that macio puts into the relevant device */
MODULE_ALIAS("of:Ni2sTi2sC");
+static int force;
+module_param(force, int, 0444);
+MODULE_PARM_DESC(force, "Force loading i2sbus even when"
+ " no layout-id property is present");
+
static struct of_device_id i2sbus_match[] = {
{ .name = "i2s" },
{ }
if (i2sdev->intfregs) iounmap(i2sdev->intfregs);
if (i2sdev->out.dbdma) iounmap(i2sdev->out.dbdma);
if (i2sdev->in.dbdma) iounmap(i2sdev->in.dbdma);
- for (i=0;i<3;i++)
+ for (i = aoa_resource_i2smmio; i <= aoa_resource_rxdbdma; i++)
if (i2sdev->allocated_resource[i])
release_and_free_resource(i2sdev->allocated_resource[i]);
free_dbdma_descriptor_ring(i2sdev, &i2sdev->out.dbdma_ring);
free_dbdma_descriptor_ring(i2sdev, &i2sdev->in.dbdma_ring);
- for (i=0;i<3;i++)
+ for (i = aoa_resource_i2smmio; i <= aoa_resource_rxdbdma; i++)
free_irq(i2sdev->interrupts[i], i2sdev);
i2sbus_control_remove_dev(i2sdev->control, i2sdev);
mutex_destroy(&i2sdev->lock);
return IRQ_HANDLED;
}
-static int force;
-module_param(force, int, 0444);
-MODULE_PARM_DESC(force, "Force loading i2sbus even when"
- " no layout-id property is present");
+
+/*
+ * XXX FIXME: We test the layout_id's here to get the proper way of
+ * mapping in various registers, thanks to bugs in Apple device-trees.
+ * We could instead key off the machine model and the name of the i2s
+ * node (i2s-a). This we'll do when we move it all to macio_asic.c
+ * and have that export items for each sub-node too.
+ */
+static int i2sbus_get_and_fixup_rsrc(struct device_node *np, int index,
+ int layout, struct resource *res)
+{
+ struct device_node *parent;
+ int pindex, rc = -ENXIO;
+ u32 *reg;
+
+ /* Machines with layout 76 and 36 (K2 based) have a weird device
+ * tree what we need to special case.
+ * Normal machines just fetch the resource from the i2s-X node.
+ * Darwin further divides normal machines into old and new layouts
+ * with a subtely different code path but that doesn't seem necessary
+ * in practice, they just bloated it. In addition, even on our K2
+ * case the i2s-modem node, if we ever want to handle it, uses the
+ * normal layout
+ */
+ if (layout != 76 && layout != 36)
+ return of_address_to_resource(np, index, res);
+
+ parent = of_get_parent(np);
+ pindex = (index == aoa_resource_i2smmio) ? 0 : 1;
+ rc = of_address_to_resource(parent, pindex, res);
+ if (rc)
+ goto bail;
+ reg = (u32 *)get_property(np, "reg", NULL);
+ if (reg == NULL) {
+ rc = -ENXIO;
+ goto bail;
+ }
+ res->start += reg[index * 2];
+ res->end = res->start + reg[index * 2 + 1] - 1;
+ bail:
+ of_node_put(parent);
+ return rc;
+}
/* FIXME: look at device node refcounting */
static int i2sbus_add_dev(struct macio_dev *macio,
{
struct i2sbus_dev *dev;
struct device_node *child = NULL, *sound = NULL;
- int i;
+ struct resource *r;
+ int i, layout = 0, rlen;
static const char *rnames[] = { "i2sbus: %s (control)",
"i2sbus: %s (tx)",
"i2sbus: %s (rx)" };
if (strncmp(np->name, "i2s-", 4))
return 0;
- if (macio_irq_count(macio) != 3)
- return 0;
-
dev = kzalloc(sizeof(struct i2sbus_dev), GFP_KERNEL);
if (!dev)
return 0;
u32 *layout_id;
layout_id = (u32*) get_property(sound, "layout-id", NULL);
if (layout_id) {
+ layout = *layout_id;
snprintf(dev->sound.modalias, 32,
- "sound-layout-%d", *layout_id);
+ "sound-layout-%d", layout);
force = 1;
}
}
dev->bus_number = np->name[4] - 'a';
INIT_LIST_HEAD(&dev->sound.codec_list);
- for (i=0;i<3;i++) {
+ for (i = aoa_resource_i2smmio; i <= aoa_resource_rxdbdma; i++) {
dev->interrupts[i] = -1;
- snprintf(dev->rnames[i], sizeof(dev->rnames[i]), rnames[i], np->name);
+ snprintf(dev->rnames[i], sizeof(dev->rnames[i]),
+ rnames[i], np->name);
}
- for (i=0;i<3;i++) {
- if (request_irq(macio_irq(macio, i), ints[i], 0,
- dev->rnames[i], dev))
+ for (i = aoa_resource_i2smmio; i <= aoa_resource_rxdbdma; i++) {
+ int irq = irq_of_parse_and_map(np, i);
+ if (request_irq(irq, ints[i], 0, dev->rnames[i], dev))
goto err;
- dev->interrupts[i] = macio_irq(macio, i);
+ dev->interrupts[i] = irq;
}
- for (i=0;i<3;i++) {
- if (of_address_to_resource(np, i, &dev->resources[i]))
+
+ /* Resource handling is problematic as some device-trees contain
+ * useless crap (ugh ugh ugh). We work around that here by calling
+ * specific functions for calculating the appropriate resources.
+ *
+ * This will all be moved to macio_asic.c at one point
+ */
+ for (i = aoa_resource_i2smmio; i <= aoa_resource_rxdbdma; i++) {
+ if (i2sbus_get_and_fixup_rsrc(np,i,layout,&dev->resources[i]))
goto err;
- /* if only we could use our resource dev->resources[i]...
+ /* If only we could use our resource dev->resources[i]...
* but request_resource doesn't know about parents and
- * contained resources... */
+ * contained resources...
+ */
dev->allocated_resource[i] =
request_mem_region(dev->resources[i].start,
dev->resources[i].end -
goto err;
}
}
- /* should do sanity checking here about length of them */
- dev->intfregs = ioremap(dev->resources[0].start,
- dev->resources[0].end-dev->resources[0].start+1);
- dev->out.dbdma = ioremap(dev->resources[1].start,
- dev->resources[1].end-dev->resources[1].start+1);
- dev->in.dbdma = ioremap(dev->resources[2].start,
- dev->resources[2].end-dev->resources[2].start+1);
+
+ r = &dev->resources[aoa_resource_i2smmio];
+ rlen = r->end - r->start + 1;
+ if (rlen < sizeof(struct i2s_interface_regs))
+ goto err;
+ dev->intfregs = ioremap(r->start, rlen);
+
+ r = &dev->resources[aoa_resource_txdbdma];
+ rlen = r->end - r->start + 1;
+ if (rlen < sizeof(struct dbdma_regs))
+ goto err;
+ dev->out.dbdma = ioremap(r->start, rlen);
+
+ r = &dev->resources[aoa_resource_rxdbdma];
+ rlen = r->end - r->start + 1;
+ if (rlen < sizeof(struct dbdma_regs))
+ goto err;
+ dev->in.dbdma = ioremap(r->start, rlen);
+
if (!dev->intfregs || !dev->out.dbdma || !dev->in.dbdma)
goto err;
*/
#ifndef __I2SBUS_H
#define __I2SBUS_H
-#include <asm/dbdma.h>
#include <linux/interrupt.h>
-#include <sound/pcm.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
+
+#include <sound/pcm.h>
+
#include <asm/prom.h>
+#include <asm/pmac_feature.h>
+#include <asm/dbdma.h>
+
#include "i2sbus-interface.h"
-#include "i2sbus-control.h"
#include "../soundbus.h"
struct i2sbus_control {
- volatile struct i2s_control_regs __iomem *controlregs;
- struct resource rsrc;
struct list_head list;
+ struct macio_chip *macio;
};
#define MAX_DBDMA_COMMANDS 32
volatile struct dbdma_regs __iomem *dbdma;
};
+enum {
+ aoa_resource_i2smmio = 0,
+ aoa_resource_txdbdma,
+ aoa_resource_rxdbdma,
+};
+
struct i2sbus_dev {
struct soundbus_dev sound;
struct macio_dev *macio;
struct device *device = NULL;
snd_assert(name, return -EINVAL);
- preg = kmalloc(sizeof(struct snd_minor) + strlen(name) + 1, GFP_KERNEL);
+ preg = kmalloc(sizeof *preg, GFP_KERNEL);
if (preg == NULL)
return -ENOMEM;
preg->type = type;
preg->device = dev;
preg->f_ops = f_ops;
preg->private_data = private_data;
- strcpy(preg->name, name);
mutex_lock(&sound_mutex);
#ifdef CONFIG_SND_DYNAMIC_MINORS
minor = snd_find_free_minor();
struct snd_timer_instance *ti;
struct list_head *p;
unsigned long resolution, ticks;
+ unsigned long flags;
- spin_lock(&timer->lock);
+ spin_lock_irqsave(&timer->lock, flags);
/* now process all callbacks */
while (!list_empty(&timer->sack_list_head)) {
p = timer->sack_list_head.next; /* get first item */
spin_lock(&timer->lock);
ti->flags &= ~SNDRV_TIMER_IFLG_CALLBACK;
}
- spin_unlock(&timer->lock);
+ spin_unlock_irqrestore(&timer->lock, flags);
}
/*
buf[0] = reg & 0x7f;
buf[1] = val;
if ((err = snd_i2c_sendbytes(device, buf, 2)) != 2) {
- snd_printk(KERN_ERR "unable to send bytes 0x%02x:0x%02x to CS8427 (%i)\n", buf[0], buf[1], err);
+ snd_printk(KERN_ERR "unable to send bytes 0x%02x:0x%02x "
+ "to CS8427 (%i)\n", buf[0], buf[1], err);
return err < 0 ? err : -EIO;
}
return 0;
}
+EXPORT_SYMBOL(snd_cs8427_reg_write);
+
static int snd_cs8427_reg_read(struct snd_i2c_device *device, unsigned char reg)
{
int err;
unsigned char buf;
if ((err = snd_i2c_sendbytes(device, ®, 1)) != 1) {
- snd_printk(KERN_ERR "unable to send register 0x%x byte to CS8427\n", reg);
+ snd_printk(KERN_ERR "unable to send register 0x%x byte "
+ "to CS8427\n", reg);
return err < 0 ? err : -EIO;
}
if ((err = snd_i2c_readbytes(device, &buf, 1)) != 1) {
- snd_printk(KERN_ERR "unable to read register 0x%x byte from CS8427\n", reg);
+ snd_printk(KERN_ERR "unable to read register 0x%x byte "
+ "from CS8427\n", reg);
return err < 0 ? err : -EIO;
}
return buf;
int count)
{
struct cs8427 *chip = device->private_data;
- char *hw_data = udata ? chip->playback.hw_udata : chip->playback.hw_status;
+ char *hw_data = udata ?
+ chip->playback.hw_udata : chip->playback.hw_status;
char data[32];
int err, idx;
memset(data, 0, sizeof(data));
if (memcmp(hw_data, data, count) == 0) {
chip->regmap[CS8427_REG_UDATABUF] &= ~CS8427_UBMMASK;
- chip->regmap[CS8427_REG_UDATABUF] |= CS8427_UBMZEROS | CS8427_EFTUI;
- if ((err = snd_cs8427_reg_write(device, CS8427_REG_UDATABUF,
- chip->regmap[CS8427_REG_UDATABUF])) < 0)
- return err;
- return 0;
+ chip->regmap[CS8427_REG_UDATABUF] |= CS8427_UBMZEROS |
+ CS8427_EFTUI;
+ err = snd_cs8427_reg_write(device, CS8427_REG_UDATABUF,
+ chip->regmap[CS8427_REG_UDATABUF]);
+ return err < 0 ? err : 0;
}
}
data[0] = CS8427_REG_AUTOINC | CS8427_REG_CORU_DATABUF;
{
static unsigned char initvals1[] = {
CS8427_REG_CONTROL1 | CS8427_REG_AUTOINC,
- /* CS8427_REG_CONTROL1: RMCK to OMCK, valid PCM audio, disable mutes, TCBL=output */
+ /* CS8427_REG_CONTROL1: RMCK to OMCK, valid PCM audio, disable mutes,
+ TCBL=output */
CS8427_SWCLK | CS8427_TCBLDIR,
- /* CS8427_REG_CONTROL2: hold last valid audio sample, RMCK=256*Fs, normal stereo operation */
+ /* CS8427_REG_CONTROL2: hold last valid audio sample, RMCK=256*Fs,
+ normal stereo operation */
0x00,
- /* CS8427_REG_DATAFLOW: output drivers normal operation, Tx<=serial, Rx=>serial */
+ /* CS8427_REG_DATAFLOW: output drivers normal operation, Tx<=serial,
+ Rx=>serial */
CS8427_TXDSERIAL | CS8427_SPDAES3RECEIVER,
- /* CS8427_REG_CLOCKSOURCE: Run off, CMCK=256*Fs, output time base = OMCK, input time base =
- recovered input clock, recovered input clock source is ILRCK changed to AES3INPUT (workaround, see snd_cs8427_reset) */
+ /* CS8427_REG_CLOCKSOURCE: Run off, CMCK=256*Fs,
+ output time base = OMCK, input time base = recovered input clock,
+ recovered input clock source is ILRCK changed to AES3INPUT
+ (workaround, see snd_cs8427_reset) */
CS8427_RXDILRCK,
- /* CS8427_REG_SERIALINPUT: Serial audio input port data format = I2S, 24-bit, 64*Fsi */
+ /* CS8427_REG_SERIALINPUT: Serial audio input port data format = I2S,
+ 24-bit, 64*Fsi */
CS8427_SIDEL | CS8427_SILRPOL,
- /* CS8427_REG_SERIALOUTPUT: Serial audio output port data format = I2S, 24-bit, 64*Fsi */
+ /* CS8427_REG_SERIALOUTPUT: Serial audio output port data format
+ = I2S, 24-bit, 64*Fsi */
CS8427_SODEL | CS8427_SOLRPOL,
};
static unsigned char initvals2[] = {
CS8427_REG_RECVERRMASK | CS8427_REG_AUTOINC,
- /* CS8427_REG_RECVERRMASK: unmask the input PLL clock, V, confidence, biphase, parity status bits */
- /* CS8427_UNLOCK | CS8427_V | CS8427_CONF | CS8427_BIP | CS8427_PAR, */
+ /* CS8427_REG_RECVERRMASK: unmask the input PLL clock, V, confidence,
+ biphase, parity status bits */
+ /* CS8427_UNLOCK | CS8427_V | CS8427_CONF | CS8427_BIP | CS8427_PAR,*/
0xff, /* set everything */
/* CS8427_REG_CSDATABUF:
Registers 32-55 window to CS buffer
struct snd_i2c_device *device;
unsigned char buf[24];
- if ((err = snd_i2c_device_create(bus, "CS8427", CS8427_ADDR | (addr & 7),
+ if ((err = snd_i2c_device_create(bus, "CS8427",
+ CS8427_ADDR | (addr & 7),
&device)) < 0)
return err;
chip = device->private_data = kzalloc(sizeof(*chip), GFP_KERNEL);
device->private_free = snd_cs8427_free;
snd_i2c_lock(bus);
- if ((err = snd_cs8427_reg_read(device, CS8427_REG_ID_AND_VER)) !=
- CS8427_VER8427A) {
+ err = snd_cs8427_reg_read(device, CS8427_REG_ID_AND_VER);
+ if (err != CS8427_VER8427A) {
snd_i2c_unlock(bus);
snd_printk(KERN_ERR "unable to find CS8427 signature "
"(expected 0x%x, read 0x%x),\n",
return -EFAULT;
}
/* turn off run bit while making changes to configuration */
- if ((err = snd_cs8427_reg_write(device, CS8427_REG_CLOCKSOURCE, 0x00)) < 0)
+ err = snd_cs8427_reg_write(device, CS8427_REG_CLOCKSOURCE, 0x00);
+ if (err < 0)
goto __fail;
/* send initial values */
memcpy(chip->regmap + (initvals1[0] & 0x7f), initvals1 + 1, 6);
return err < 0 ? err : -EIO;
}
+EXPORT_SYMBOL(snd_cs8427_create);
+
/*
* Reset the chip using run bit, also lock PLL using ILRCK and
* put back AES3INPUT. This workaround is described in latest
snd_assert(cs8427, return);
chip = cs8427->private_data;
snd_i2c_lock(cs8427->bus);
- if ((chip->regmap[CS8427_REG_CLOCKSOURCE] & CS8427_RXDAES3INPUT) == CS8427_RXDAES3INPUT) /* AES3 bit is set */
+ if ((chip->regmap[CS8427_REG_CLOCKSOURCE] & CS8427_RXDAES3INPUT) ==
+ CS8427_RXDAES3INPUT) /* AES3 bit is set */
aes3input = 1;
chip->regmap[CS8427_REG_CLOCKSOURCE] &= ~(CS8427_RUN | CS8427_RXDMASK);
snd_cs8427_reg_write(cs8427, CS8427_REG_CLOCKSOURCE,
snd_i2c_lock(device->bus);
if ((err = snd_i2c_sendbytes(device, ®, 1)) != 1) {
- snd_printk(KERN_ERR "unable to send register 0x%x byte to CS8427\n", reg);
+ snd_printk(KERN_ERR "unable to send register 0x%x byte "
+ "to CS8427\n", reg);
snd_i2c_unlock(device->bus);
return err < 0 ? err : -EIO;
}
- if ((err = snd_i2c_readbytes(device, ucontrol->value.bytes.data, 10)) != 10) {
- snd_printk(KERN_ERR "unable to read Q-subcode bytes from CS8427\n");
+ err = snd_i2c_readbytes(device, ucontrol->value.bytes.data, 10);
+ if (err != 10) {
+ snd_printk(KERN_ERR "unable to read Q-subcode bytes "
+ "from CS8427\n");
snd_i2c_unlock(device->bus);
return err < 0 ? err : -EIO;
}
return 0;
}
-static int snd_cs8427_spdif_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
+static int snd_cs8427_spdif_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
uinfo->count = 1;
snd_i2c_lock(device->bus);
change = memcmp(ucontrol->value.iec958.status, status, 24) != 0;
memcpy(status, ucontrol->value.iec958.status, 24);
- if (change && (kcontrol->private_value ? runtime != NULL : runtime == NULL)) {
+ if (change && (kcontrol->private_value ?
+ runtime != NULL : runtime == NULL)) {
err = snd_cs8427_send_corudata(device, 0, status, 24);
if (err < 0)
change = err;
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
.info = snd_cs8427_in_status_info,
.name = "IEC958 CS8427 Input Status",
- .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+ .access = (SNDRV_CTL_ELEM_ACCESS_READ |
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE),
.get = snd_cs8427_in_status_get,
.private_value = 15,
},
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
.info = snd_cs8427_in_status_info,
.name = "IEC958 CS8427 Error Status",
- .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+ .access = (SNDRV_CTL_ELEM_ACCESS_READ |
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE),
.get = snd_cs8427_in_status_get,
.private_value = 16,
},
.private_value = 0
},
{
- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_INACTIVE,
+ .access = (SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_INACTIVE),
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PCM_STREAM),
.info = snd_cs8427_spdif_info,
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
.info = snd_cs8427_qsubcode_info,
.name = "IEC958 Q-subcode Capture Default",
- .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+ .access = (SNDRV_CTL_ELEM_ACCESS_READ |
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE),
.get = snd_cs8427_qsubcode_get
}};
err = snd_ctl_add(cs8427->bus->card, kctl);
if (err < 0)
return err;
- if (!strcmp(kctl->id.name, SNDRV_CTL_NAME_IEC958("",PLAYBACK,PCM_STREAM)))
+ if (! strcmp(kctl->id.name,
+ SNDRV_CTL_NAME_IEC958("",PLAYBACK,PCM_STREAM)))
chip->playback.pcm_ctl = kctl;
}
return 0;
}
+EXPORT_SYMBOL(snd_cs8427_iec958_build);
+
int snd_cs8427_iec958_active(struct snd_i2c_device *cs8427, int active)
{
struct cs8427 *chip;
snd_assert(cs8427, return -ENXIO);
chip = cs8427->private_data;
if (active)
- memcpy(chip->playback.pcm_status, chip->playback.def_status, 24);
+ memcpy(chip->playback.pcm_status,
+ chip->playback.def_status, 24);
chip->playback.pcm_ctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_INACTIVE;
- snd_ctl_notify(cs8427->bus->card, SNDRV_CTL_EVENT_MASK_VALUE |
- SNDRV_CTL_EVENT_MASK_INFO, &chip->playback.pcm_ctl->id);
+ snd_ctl_notify(cs8427->bus->card,
+ SNDRV_CTL_EVENT_MASK_VALUE | SNDRV_CTL_EVENT_MASK_INFO,
+ &chip->playback.pcm_ctl->id);
return 0;
}
+EXPORT_SYMBOL(snd_cs8427_iec958_active);
+
int snd_cs8427_iec958_pcm(struct snd_i2c_device *cs8427, unsigned int rate)
{
struct cs8427 *chip;
return err < 0 ? err : 0;
}
+EXPORT_SYMBOL(snd_cs8427_iec958_pcm);
+
static int __init alsa_cs8427_module_init(void)
{
return 0;
module_init(alsa_cs8427_module_init)
module_exit(alsa_cs8427_module_exit)
-
-EXPORT_SYMBOL(snd_cs8427_create);
-EXPORT_SYMBOL(snd_cs8427_reset);
-EXPORT_SYMBOL(snd_cs8427_reg_write);
-EXPORT_SYMBOL(snd_cs8427_iec958_build);
-EXPORT_SYMBOL(snd_cs8427_iec958_active);
-EXPORT_SYMBOL(snd_cs8427_iec958_pcm);
# Toplevel Module Dependency
obj-$(CONFIG_SND_AZT2320) += snd-cs4231-lib.o
+obj-$(CONFIG_SND_MIRO) += snd-cs4231-lib.o
obj-$(CONFIG_SND_OPL3SA2) += snd-cs4231-lib.o
obj-$(CONFIG_SND_CS4231) += snd-cs4231.o snd-cs4231-lib.o
obj-$(CONFIG_SND_CS4232) += snd-cs4232.o snd-cs4231-lib.o
module_param_array(pcm_channels, int, NULL, 0444);
MODULE_PARM_DESC(pcm_channels, "Reserved PCM channels for GUS Extreme driver.");
-struct platform_device *devices[SNDRV_CARDS];
+static struct platform_device *devices[SNDRV_CARDS];
#define PFX "gusextreme: "
/* weird stuff, derived from port I/O tracing with dosemu */
-static unsigned char page_zero[] __initdata = {
+static unsigned char page_zero[] __devinitdata = {
0x01, 0x7c, 0x00, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf5, 0x00,
0x11, 0x00, 0x20, 0x00, 0x32, 0x00, 0x40, 0x00, 0x13, 0x00, 0x00,
0x00, 0x14, 0x02, 0x76, 0x00, 0x60, 0x00, 0x80, 0x02, 0x00, 0x00,
0x1d, 0x02, 0xdf
};
-static unsigned char page_one[] __initdata = {
+static unsigned char page_one[] __devinitdata = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x19, 0x00,
0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xd8, 0x00, 0x00,
0x02, 0x20, 0x00, 0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x01,
0x60, 0x00, 0x1b
};
-static unsigned char page_two[] __initdata = {
+static unsigned char page_two[] __devinitdata = {
0xc4, 0x00, 0x44, 0x07, 0x44, 0x00, 0x40, 0x25, 0x01, 0x06, 0xc4,
0x07, 0x40, 0x25, 0x01, 0x00, 0x46, 0x46, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x46, 0x05, 0x46, 0x07, 0x46, 0x07, 0x44
};
-static unsigned char page_three[] __initdata = {
+static unsigned char page_three[] __devinitdata = {
0x07, 0x40, 0x00, 0x00, 0x00, 0x47, 0x00, 0x40, 0x00, 0x40, 0x06,
0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x02, 0x00, 0x42, 0x00, 0xc0, 0x00, 0x40
};
-static unsigned char page_four[] __initdata = {
+static unsigned char page_four[] __devinitdata = {
0x63, 0x03, 0x26, 0x02, 0x2c, 0x00, 0x24, 0x00, 0x2e, 0x02, 0x02,
0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x02, 0x62, 0x02, 0x20, 0x01, 0x21, 0x01
};
-static unsigned char page_six[] __initdata = {
+static unsigned char page_six[] __devinitdata = {
0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x04, 0x00, 0x00, 0x06, 0x00,
0x00, 0x08, 0x00, 0x00, 0x0a, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x0e,
0x00, 0x00, 0x10, 0x00, 0x00, 0x12, 0x00, 0x00, 0x14, 0x00, 0x00,
0x80, 0x00, 0x7e, 0x80, 0x80
};
-static unsigned char page_seven[] __initdata = {
+static unsigned char page_seven[] __devinitdata = {
0x0f, 0xff, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, 0x02, 0x00, 0x00,
0x00, 0x00, 0x00, 0x0f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00,
0x08, 0x00, 0x00, 0x00, 0x0f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x0f,
0x00, 0x02, 0x00
};
-static unsigned char page_zero_v2[] __initdata = {
+static unsigned char page_zero_v2[] __devinitdata = {
0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
-static unsigned char page_one_v2[] __initdata = {
+static unsigned char page_one_v2[] __devinitdata = {
0x01, 0xc0, 0x01, 0xfa, 0x00, 0x1a, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
-static unsigned char page_two_v2[] __initdata = {
+static unsigned char page_two_v2[] __devinitdata = {
0x46, 0x46, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00
};
-static unsigned char page_three_v2[] __initdata = {
+static unsigned char page_three_v2[] __devinitdata = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00
};
-static unsigned char page_four_v2[] __initdata = {
+static unsigned char page_four_v2[] __devinitdata = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00
};
-static unsigned char page_seven_v2[] __initdata = {
+static unsigned char page_seven_v2[] __devinitdata = {
0x0f, 0xff, 0x0f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
-static unsigned char mod_v2[] __initdata = {
+static unsigned char mod_v2[] __devinitdata = {
0x01, 0x00, 0x02, 0x00, 0x01, 0x01, 0x02, 0x00, 0x01, 0x02, 0x02,
0x00, 0x01, 0x03, 0x02, 0x00, 0x01, 0x04, 0x02, 0x00, 0x01, 0x05,
0x02, 0x00, 0x01, 0x06, 0x02, 0x00, 0x01, 0x07, 0x02, 0x00, 0xb0,
0x02, 0x01, 0x01, 0x04, 0x02, 0x01, 0x01, 0x05, 0x02, 0x01, 0x01,
0x06, 0x02, 0x01, 0x01, 0x07, 0x02, 0x01
};
-static unsigned char coefficients[] __initdata = {
+static unsigned char coefficients[] __devinitdata = {
0x07, 0x46, 0x00, 0x00, 0x07, 0x49, 0x00, 0x00, 0x00, 0x4b, 0x03,
0x11, 0x00, 0x4d, 0x01, 0x32, 0x07, 0x46, 0x00, 0x00, 0x07, 0x49,
0x00, 0x00, 0x07, 0x40, 0x00, 0x00, 0x07, 0x41, 0x00, 0x00, 0x01,
0x06, 0x6c, 0x4c, 0x6c, 0x06, 0x50, 0x52, 0xe2, 0x06, 0x42, 0x02,
0xba
};
-static unsigned char coefficients2[] __initdata = {
+static unsigned char coefficients2[] __devinitdata = {
0x07, 0x46, 0x00, 0x00, 0x07, 0x49, 0x00, 0x00, 0x07, 0x45, 0x0f,
0xff, 0x07, 0x48, 0x0f, 0xff, 0x07, 0x7b, 0x04, 0xcc, 0x07, 0x7d,
0x04, 0xcc, 0x07, 0x7c, 0x00, 0x00, 0x07, 0x7e, 0x00, 0x00, 0x07,
0x46, 0x00, 0x00, 0x07, 0x49, 0x00, 0x00, 0x07, 0x47, 0x00, 0x00,
0x07, 0x4a, 0x00, 0x00, 0x07, 0x4c, 0x00, 0x00, 0x07, 0x4e, 0x00, 0x00
};
-static unsigned char coefficients3[] __initdata = {
+static unsigned char coefficients3[] __devinitdata = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x28, 0x00, 0x51, 0x00,
0x51, 0x00, 0x7a, 0x00, 0x7a, 0x00, 0xa3, 0x00, 0xa3, 0x00, 0xcc,
0x00, 0xcc, 0x00, 0xf5, 0x00, 0xf5, 0x01, 0x1e, 0x01, 0x1e, 0x01,
*/
-int __init
+int __devinit
snd_wavefront_fx_start (snd_wavefront_t *dev)
{
spin_unlock_irqrestore (&card->wavefront.midi.virtual, flags);
}
-int __init
+int __devinit
snd_wavefront_midi_start (snd_wavefront_card_t *card)
{
7 Unused
*/
-static int __init
+static int __devinit
snd_wavefront_interrupt_bits (int irq)
{
return bits;
}
-static void __init
+static void __devinit
wavefront_should_cause_interrupt (snd_wavefront_t *dev,
int val, int port, int timeout)
}
}
-static int __init
+static int __devinit
wavefront_reset_to_cleanliness (snd_wavefront_t *dev)
{
#include <asm/uaccess.h>
-static int __init
+static int __devinit
wavefront_download_firmware (snd_wavefront_t *dev, char *path)
{
}
-static int __init
+static int __devinit
wavefront_do_reset (snd_wavefront_t *dev)
{
return 1;
}
-int __init
+int __devinit
snd_wavefront_start (snd_wavefront_t *dev)
{
return (0);
}
-int __init
+int __devinit
snd_wavefront_detect (snd_wavefront_card_t *card)
{
To compile this driver as a module, choose M here: the module
will be called snd-fm801.
-config SND_FM801_TEA575X
- tristate "ForteMedia FM801 + TEA5757 tuner"
+config SND_FM801_TEA575X_BOOL
+ bool "ForteMedia FM801 + TEA5757 tuner"
depends on SND_FM801
- select VIDEO_DEV
help
Say Y here to include support for soundcards based on the ForteMedia
FM801 chip with a TEA5757 tuner connected to GPIO1-3 pins (Media
- Forte SF256-PCS-02).
+ Forte SF256-PCS-02) into the snd-fm801 driver.
- To compile this driver as a module, choose M here: the module
- will be called snd-fm801-tea575x.
+config SND_FM801_TEA575X
+ tristate
+ depends on SND_FM801_TEA575X_BOOL
+ default SND_FM801
+ select VIDEO_DEV
config SND_HDA_INTEL
tristate "Intel HD Audio"
}
}
-static inline u16
+static u16
snd_ad1889_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
{
struct snd_ad1889 *chip = ac97->private_data;
return ad1889_readw(chip, AD_AC97_BASE + reg);
}
-static inline void
+static void
snd_ad1889_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short val)
{
struct snd_ad1889 *chip = ac97->private_data;
return 0;
}
-static inline int
+static int
snd_ad1889_dev_free(struct snd_device *device)
{
struct snd_ad1889 *chip = device->device_data;
pci_set_drvdata(pci, NULL);
}
-static struct pci_device_id snd_ad1889_ids[] __devinitdata = {
+static struct pci_device_id snd_ad1889_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_ANALOG_DEVICES, PCI_DEVICE_ID_AD1889JS) },
{ 0, },
};
#endif
};
-static struct pci_device_id snd_ali_ids[] __devinitdata = {
+static struct pci_device_id snd_ali_ids[] = {
{PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5451), 0, 0, 0},
{0, }
};
int block_counter_register;
};
-static struct pci_device_id snd_als300_ids[] __devinitdata = {
+static struct pci_device_id snd_als300_ids[] = {
{ 0x4005, 0x0300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_ALS300 },
{ 0x4005, 0x0308, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_ALS300_PLUS },
{ 0, }
#endif
};
-static struct pci_device_id snd_als4000_ids[] __devinitdata = {
+static struct pci_device_id snd_als4000_ids[] = {
{ 0x4005, 0x4000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* ALS4000 */
{ 0, }
};
/*
*/
-static struct pci_device_id snd_atiixp_ids[] __devinitdata = {
+static struct pci_device_id snd_atiixp_ids[] = {
{ 0x1002, 0x4341, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB200 */
{ 0x1002, 0x4361, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB300 */
{ 0x1002, 0x4370, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB400 */
/*
*/
-static struct pci_device_id snd_atiixp_ids[] __devinitdata = {
+static struct pci_device_id snd_atiixp_ids[] = {
{ 0x1002, 0x434d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB200 */
{ 0x1002, 0x4378, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB400 */
{ 0, }
#include "au8810.h"
#include "au88x0.h"
-static struct pci_device_id snd_vortex_ids[] __devinitdata = {
+static struct pci_device_id snd_vortex_ids[] = {
{PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_ADVANTAGE,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1,},
{0,}
#include "au8820.h"
#include "au88x0.h"
-static struct pci_device_id snd_vortex_ids[] __devinitdata = {
+static struct pci_device_id snd_vortex_ids[] = {
{PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_1,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
{0,}
#include "au8830.h"
#include "au88x0.h"
-static struct pci_device_id snd_vortex_ids[] __devinitdata = {
+static struct pci_device_id snd_vortex_ids[] = {
{PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
{0,}
/* A3D functions. */
#ifndef CHIP_AU8820
-static void vortex_Vort3D(vortex_t * v, int en);
+static void vortex_Vort3D_enable(vortex_t * v);
+static void vortex_Vort3D_disable(vortex_t * v);
static void vortex_Vort3D_connect(vortex_t * vortex, int en);
static void vortex_Vort3D_InitializeSource(a3dsrc_t * a, int en);
#endif
static int vortex_a3d_register_controls(vortex_t * vortex);
static void vortex_a3d_unregister_controls(vortex_t * vortex);
/* A3D base support init/shudown */
-static void vortex_Vort3D(vortex_t * v, int en)
+static void __devinit vortex_Vort3D_enable(vortex_t * v)
{
int i;
- if (en) {
- Vort3DRend_Initialize(v, XT_HEADPHONE);
- for (i = 0; i < NR_A3D; i++) {
- vortex_A3dSourceHw_Initialize(v, i % 4, i >> 2);
- a3dsrc_ZeroStateA3D(&(v->a3d[0]));
- }
- } else {
- vortex_XtalkHw_Disable(v);
+
+ Vort3DRend_Initialize(v, XT_HEADPHONE);
+ for (i = 0; i < NR_A3D; i++) {
+ vortex_A3dSourceHw_Initialize(v, i % 4, i >> 2);
+ a3dsrc_ZeroStateA3D(&(v->a3d[0]));
}
/* Register ALSA controls */
- if (en) {
- vortex_a3d_register_controls(v);
- } else {
- vortex_a3d_unregister_controls(v);
- }
+ vortex_a3d_register_controls(v);
+}
+
+static void vortex_Vort3D_disable(vortex_t * v)
+{
+ vortex_XtalkHw_Disable(v);
+ vortex_a3d_unregister_controls(v);
}
/* Make A3D subsystem connections. */
};
/* Control (un)registration. */
-static int vortex_a3d_register_controls(vortex_t * vortex)
+static int __devinit vortex_a3d_register_controls(vortex_t * vortex)
{
struct snd_kcontrol *kcontrol;
int err, i;
#ifndef CHIP_AU8820
vortex_eq_init(vortex);
vortex_spdif_init(vortex, 48000, 1);
- vortex_Vort3D(vortex, 1);
+ vortex_Vort3D_enable(vortex);
#endif
#ifndef CHIP_AU8810
vortex_wt_init(vortex);
printk(KERN_INFO "Vortex: shutdown...");
#ifndef CHIP_AU8820
vortex_eq_free(vortex);
- vortex_Vort3D(vortex, 0);
+ vortex_Vort3D_disable(vortex);
#endif
//vortex_disable_timer_int(vortex);
vortex_disable_int(vortex);
#endif
};
-static const struct pci_device_id snd_azf3328_ids[] __devinitdata = {
+static const struct pci_device_id snd_azf3328_ids[] = {
{ 0x122D, 0x50DC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* PCI168/3328 */
{ 0x122D, 0x80DA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* 3328 */
{ 0, }
.driver_data = rate }
/* driver_data is the default digital_rate value for that device */
-static struct pci_device_id snd_bt87x_ids[] __devinitdata = {
+static struct pci_device_id snd_bt87x_ids[] = {
/* Hauppauge WinTV series */
BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x0070, 0x13eb, 32000),
/* Hauppauge WinTV series */
}
// PCI IDs
-static struct pci_device_id snd_ca0106_ids[] __devinitdata = {
+static struct pci_device_id snd_ca0106_ids[] = {
{ 0x1102, 0x0007, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* Audigy LS or Live 24bit */
{ 0, }
};
#endif
-static struct pci_device_id snd_cmipci_ids[] __devinitdata = {
+static struct pci_device_id snd_cmipci_ids[] = {
{PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
static irqreturn_t snd_cs4281_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-static struct pci_device_id snd_cs4281_ids[] __devinitdata = {
+static struct pci_device_id snd_cs4281_ids[] = {
{ 0x1013, 0x6005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* CS4281 */
{ 0, }
};
module_param_array(mmap_valid, bool, NULL, 0444);
MODULE_PARM_DESC(mmap_valid, "Support OSS mmap.");
-static struct pci_device_id snd_cs46xx_ids[] __devinitdata = {
+static struct pci_device_id snd_cs46xx_ids[] = {
{ 0x1013, 0x6001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* CS4280 */
{ 0x1013, 0x6003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* CS4612 */
{ 0x1013, 0x6004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* CS4615 */
#ifdef CONFIG_SND_CS46XX_NEW_DSP
/* Only available on the Hercules Game Theater XP soundcard */
-static struct snd_kcontrol_new snd_hercules_controls[] __devinitdata = {
+static struct snd_kcontrol_new snd_hercules_controls[] = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Optical/Coaxial SPDIF Input Switch",
snd_printdd ("initializing Hercules mixer\n");
#ifdef CONFIG_SND_CS46XX_NEW_DSP
+ if (chip->in_suspend)
+ return;
+
for (idx = 0 ; idx < ARRAY_SIZE(snd_hercules_controls); idx++) {
struct snd_kcontrol *kctl;
int amp_saved;
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
+ chip->in_suspend = 1;
snd_pcm_suspend_all(chip->pcm);
// chip->ac97_powerdown = snd_cs46xx_codec_read(chip, AC97_POWER_CONTROL);
// chip->ac97_general_purpose = snd_cs46xx_codec_read(chip, BA0_AC97_GENERAL_PURPOSE);
else
chip->active_ctrl(chip, -1); /* disable CLKRUN */
chip->amplifier = amp_saved;
+ chip->in_suspend = 0;
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
return 0;
}
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable " DRIVER_NAME);
-static struct pci_device_id snd_cs5535audio_ids[] __devinitdata = {
+static struct pci_device_id snd_cs5535audio_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_AUDIO) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_AUDIO) },
{}
/*
* Class 0401: 1102:0008 (rev 00) Subsystem: 1102:1001 -> Audigy2 Value Model:SB0400
*/
-static struct pci_device_id snd_emu10k1_ids[] __devinitdata = {
+static struct pci_device_id snd_emu10k1_ids[] = {
{ 0x1102, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* EMU10K1 */
{ 0x1102, 0x0004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, /* Audigy */
{ 0x1102, 0x0008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, /* Audigy 2 Value SB0400 */
snd_emu10k1_ecard_write(emu, emu->ecard_ctrl);
}
-static int __devinit snd_emu10k1_ecard_init(struct snd_emu10k1 * emu)
+static int snd_emu10k1_ecard_init(struct snd_emu10k1 * emu)
{
unsigned int hc_value;
return 0;
}
-static int __devinit snd_emu10k1_cardbus_init(struct snd_emu10k1 * emu)
+static int snd_emu10k1_cardbus_init(struct snd_emu10k1 * emu)
{
unsigned long special_port;
unsigned int value;
return 0;
}
-static int __devinit snd_emu10k1_emu1212m_init(struct snd_emu10k1 * emu)
+static int snd_emu10k1_emu1212m_init(struct snd_emu10k1 * emu)
{
unsigned int i;
int tmp;
{
if (emu->card_capabilities->ecard)
snd_emu10k1_ecard_init(emu);
+ else if (emu->card_capabilities->ca_cardbus_chip)
+ snd_emu10k1_cardbus_init(emu);
+ else if (emu->card_capabilities->emu1212m)
+ snd_emu10k1_emu1212m_init(emu);
else
snd_emu10k1_ptr_write(emu, AC97SLOT, 0, AC97SLOT_CNTR|AC97SLOT_LFE);
snd_emu10k1_init(emu, emu->enable_ir, 1);
do_emu10k1x_midi_interrupt(emu, &emu->midi, status);
}
-static void snd_emu10k1x_midi_cmd(struct emu10k1x * emu,
+static int snd_emu10k1x_midi_cmd(struct emu10k1x * emu,
struct emu10k1x_midi *midi, unsigned char cmd, int ack)
{
unsigned long flags;
ok = 1;
}
spin_unlock_irqrestore(&midi->input_lock, flags);
- if (!ok)
+ if (!ok) {
snd_printk(KERN_ERR "midi_cmd: 0x%x failed at 0x%lx (status = 0x%x, data = 0x%x)!!!\n",
cmd, emu->port,
mpu401_read_stat(emu, midi),
mpu401_read_data(emu, midi));
+ return 1;
+ }
+ return 0;
}
static int snd_emu10k1x_midi_input_open(struct snd_rawmidi_substream *substream)
midi->substream_input = substream;
if (!(midi->midi_mode & EMU10K1X_MIDI_MODE_OUTPUT)) {
spin_unlock_irqrestore(&midi->open_lock, flags);
- snd_emu10k1x_midi_cmd(emu, midi, MPU401_RESET, 1);
- snd_emu10k1x_midi_cmd(emu, midi, MPU401_ENTER_UART, 1);
+ if (snd_emu10k1x_midi_cmd(emu, midi, MPU401_RESET, 1))
+ goto error_out;
+ if (snd_emu10k1x_midi_cmd(emu, midi, MPU401_ENTER_UART, 1))
+ goto error_out;
} else {
spin_unlock_irqrestore(&midi->open_lock, flags);
}
return 0;
+
+error_out:
+ return -EIO;
}
static int snd_emu10k1x_midi_output_open(struct snd_rawmidi_substream *substream)
midi->substream_output = substream;
if (!(midi->midi_mode & EMU10K1X_MIDI_MODE_INPUT)) {
spin_unlock_irqrestore(&midi->open_lock, flags);
- snd_emu10k1x_midi_cmd(emu, midi, MPU401_RESET, 1);
- snd_emu10k1x_midi_cmd(emu, midi, MPU401_ENTER_UART, 1);
+ if (snd_emu10k1x_midi_cmd(emu, midi, MPU401_RESET, 1))
+ goto error_out;
+ if (snd_emu10k1x_midi_cmd(emu, midi, MPU401_ENTER_UART, 1))
+ goto error_out;
} else {
spin_unlock_irqrestore(&midi->open_lock, flags);
}
return 0;
+
+error_out:
+ return -EIO;
}
static int snd_emu10k1x_midi_input_close(struct snd_rawmidi_substream *substream)
struct emu10k1x *emu;
struct emu10k1x_midi *midi = substream->rmidi->private_data;
unsigned long flags;
+ int err = 0;
emu = midi->emu;
snd_assert(emu, return -ENXIO);
midi->substream_input = NULL;
if (!(midi->midi_mode & EMU10K1X_MIDI_MODE_OUTPUT)) {
spin_unlock_irqrestore(&midi->open_lock, flags);
- snd_emu10k1x_midi_cmd(emu, midi, MPU401_RESET, 0);
+ err = snd_emu10k1x_midi_cmd(emu, midi, MPU401_RESET, 0);
} else {
spin_unlock_irqrestore(&midi->open_lock, flags);
}
- return 0;
+ return err;
}
static int snd_emu10k1x_midi_output_close(struct snd_rawmidi_substream *substream)
struct emu10k1x *emu;
struct emu10k1x_midi *midi = substream->rmidi->private_data;
unsigned long flags;
+ int err = 0;
emu = midi->emu;
snd_assert(emu, return -ENXIO);
midi->substream_output = NULL;
if (!(midi->midi_mode & EMU10K1X_MIDI_MODE_INPUT)) {
spin_unlock_irqrestore(&midi->open_lock, flags);
- snd_emu10k1x_midi_cmd(emu, midi, MPU401_RESET, 0);
+ err = snd_emu10k1x_midi_cmd(emu, midi, MPU401_RESET, 0);
} else {
spin_unlock_irqrestore(&midi->open_lock, flags);
}
- return 0;
+ return err;
}
static void snd_emu10k1x_midi_input_trigger(struct snd_rawmidi_substream *substream, int up)
}
// PCI IDs
-static struct pci_device_id snd_emu10k1x_ids[] __devinitdata = {
+static struct pci_device_id snd_emu10k1x_ids[] = {
{ 0x1102, 0x0006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* Dell OEM version (EMU10K1) */
{ 0, }
};
do_emu10k1_midi_interrupt(emu, &emu->midi2, status);
}
-static void snd_emu10k1_midi_cmd(struct snd_emu10k1 * emu, struct snd_emu10k1_midi *midi, unsigned char cmd, int ack)
+static int snd_emu10k1_midi_cmd(struct snd_emu10k1 * emu, struct snd_emu10k1_midi *midi, unsigned char cmd, int ack)
{
unsigned long flags;
int timeout, ok;
ok = 1;
}
spin_unlock_irqrestore(&midi->input_lock, flags);
- if (!ok)
+ if (!ok) {
snd_printk(KERN_ERR "midi_cmd: 0x%x failed at 0x%lx (status = 0x%x, data = 0x%x)!!!\n",
cmd, emu->port,
mpu401_read_stat(emu, midi),
mpu401_read_data(emu, midi));
+ return 1;
+ }
+ return 0;
}
static int snd_emu10k1_midi_input_open(struct snd_rawmidi_substream *substream)
midi->substream_input = substream;
if (!(midi->midi_mode & EMU10K1_MIDI_MODE_OUTPUT)) {
spin_unlock_irqrestore(&midi->open_lock, flags);
- snd_emu10k1_midi_cmd(emu, midi, MPU401_RESET, 1);
- snd_emu10k1_midi_cmd(emu, midi, MPU401_ENTER_UART, 1);
+ if (snd_emu10k1_midi_cmd(emu, midi, MPU401_RESET, 1))
+ goto error_out;
+ if (snd_emu10k1_midi_cmd(emu, midi, MPU401_ENTER_UART, 1))
+ goto error_out;
} else {
spin_unlock_irqrestore(&midi->open_lock, flags);
}
return 0;
+
+error_out:
+ return -EIO;
}
static int snd_emu10k1_midi_output_open(struct snd_rawmidi_substream *substream)
midi->substream_output = substream;
if (!(midi->midi_mode & EMU10K1_MIDI_MODE_INPUT)) {
spin_unlock_irqrestore(&midi->open_lock, flags);
- snd_emu10k1_midi_cmd(emu, midi, MPU401_RESET, 1);
- snd_emu10k1_midi_cmd(emu, midi, MPU401_ENTER_UART, 1);
+ if (snd_emu10k1_midi_cmd(emu, midi, MPU401_RESET, 1))
+ goto error_out;
+ if (snd_emu10k1_midi_cmd(emu, midi, MPU401_ENTER_UART, 1))
+ goto error_out;
} else {
spin_unlock_irqrestore(&midi->open_lock, flags);
}
return 0;
+
+error_out:
+ return -EIO;
}
static int snd_emu10k1_midi_input_close(struct snd_rawmidi_substream *substream)
struct snd_emu10k1 *emu;
struct snd_emu10k1_midi *midi = (struct snd_emu10k1_midi *)substream->rmidi->private_data;
unsigned long flags;
+ int err = 0;
emu = midi->emu;
snd_assert(emu, return -ENXIO);
midi->substream_input = NULL;
if (!(midi->midi_mode & EMU10K1_MIDI_MODE_OUTPUT)) {
spin_unlock_irqrestore(&midi->open_lock, flags);
- snd_emu10k1_midi_cmd(emu, midi, MPU401_RESET, 0);
+ err = snd_emu10k1_midi_cmd(emu, midi, MPU401_RESET, 0);
} else {
spin_unlock_irqrestore(&midi->open_lock, flags);
}
- return 0;
+ return err;
}
static int snd_emu10k1_midi_output_close(struct snd_rawmidi_substream *substream)
struct snd_emu10k1 *emu;
struct snd_emu10k1_midi *midi = (struct snd_emu10k1_midi *)substream->rmidi->private_data;
unsigned long flags;
+ int err = 0;
emu = midi->emu;
snd_assert(emu, return -ENXIO);
midi->substream_output = NULL;
if (!(midi->midi_mode & EMU10K1_MIDI_MODE_INPUT)) {
spin_unlock_irqrestore(&midi->open_lock, flags);
- snd_emu10k1_midi_cmd(emu, midi, MPU401_RESET, 0);
+ err = snd_emu10k1_midi_cmd(emu, midi, MPU401_RESET, 0);
} else {
spin_unlock_irqrestore(&midi->open_lock, flags);
}
- return 0;
+ return err;
}
static void snd_emu10k1_midi_input_trigger(struct snd_rawmidi_substream *substream, int up)
static irqreturn_t snd_audiopci_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-static struct pci_device_id snd_audiopci_ids[] __devinitdata = {
+static struct pci_device_id snd_audiopci_ids[] = {
#ifdef CHIP1370
{ 0x1274, 0x5000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* ES1370 */
#endif
static irqreturn_t snd_es1938_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-static struct pci_device_id snd_es1938_ids[] __devinitdata = {
+static struct pci_device_id snd_es1938_ids[] = {
{ 0x125d, 0x1969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* Solo-1 */
{ 0, }
};
static irqreturn_t snd_es1968_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-static struct pci_device_id snd_es1968_ids[] __devinitdata = {
+static struct pci_device_id snd_es1968_ids[] = {
/* Maestro 1 */
{ 0x1285, 0x0100, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, TYPE_MAESTRO },
/* Maestro 2 */
#include <asm/io.h>
-#if (defined(CONFIG_SND_FM801_TEA575X) || defined(CONFIG_SND_FM801_TEA575X_MODULE)) && (defined(CONFIG_VIDEO_DEV) || defined(CONFIG_VIDEO_DEV_MODULE))
+#ifdef CONFIG_SND_FM801_TEA575X_BOOL
#include <sound/tea575x-tuner.h>
#define TEA575X_RADIO 1
#endif
#endif
};
-static struct pci_device_id snd_fm801_ids[] __devinitdata = {
+static struct pci_device_id snd_fm801_ids[] = {
{ 0x1319, 0x0801, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, 0, }, /* FM801 */
{ 0x5213, 0x0510, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, 0, }, /* Gallant Odyssey Sound 4 */
{ 0, }
}
/* PCI IDs */
-static struct pci_device_id azx_ids[] __devinitdata = {
+static struct pci_device_id azx_ids[] = {
{ 0x8086, 0x2668, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ICH6 */
{ 0x8086, 0x27d8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ICH7 */
{ 0x8086, 0x269a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ESB2 */
/* reivision id to check workarounds */
#define AD1988A_REV2 0x100200
+#define is_rev2(codec) \
+ ((codec)->vendor_id == 0x11d41988 && \
+ (codec)->revision_id == AD1988A_REV2)
/*
* mixers
HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x05, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x05, 2, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Side Playback Volume", 0x0a, 0x0, HDA_OUTPUT),
+ { } /* end */
};
static struct snd_kcontrol_new ad1988_6stack_mixers1_rev2[] = {
HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0a, 2, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Side Playback Volume", 0x06, 0x0, HDA_OUTPUT),
+ { } /* end */
};
static struct snd_kcontrol_new ad1988_6stack_mixers2[] = {
HDA_CODEC_VOLUME("Surround Playback Volume", 0x0a, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x05, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x05, 2, 0x0, HDA_OUTPUT),
+ { } /* end */
};
static struct snd_kcontrol_new ad1988_3stack_mixers1_rev2[] = {
HDA_CODEC_VOLUME("Surround Playback Volume", 0x0a, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x06, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x06, 2, 0x0, HDA_OUTPUT),
+ { } /* end */
};
static struct snd_kcontrol_new ad1988_3stack_mixers2[] = {
/* A B C D E F G H */
0x04, 0x05, 0x0a, 0x04, 0x06, 0x05, 0x0a, 0x06
};
- if (codec->revision_id == AD1988A_REV2)
+ if (is_rev2(codec))
return idx_to_dac_rev2[idx];
else
return idx_to_dac[idx];
mutex_init(&spec->amp_mutex);
codec->spec = spec;
- if (codec->revision_id == AD1988A_REV2)
+ if (is_rev2(codec))
snd_printk(KERN_INFO "patch_analog: AD1988A rev.2 is detected, enable workarounds\n");
board_config = snd_hda_check_board_config(codec, ad1988_cfg_tbl);
case AD1988_6STACK_DIG:
spec->multiout.max_channels = 8;
spec->multiout.num_dacs = 4;
- if (codec->revision_id == AD1988A_REV2)
+ if (is_rev2(codec))
spec->multiout.dac_nids = ad1988_6stack_dac_nids_rev2;
else
spec->multiout.dac_nids = ad1988_6stack_dac_nids;
spec->input_mux = &ad1988_6stack_capture_source;
spec->num_mixers = 2;
- if (codec->revision_id == AD1988A_REV2)
+ if (is_rev2(codec))
spec->mixers[0] = ad1988_6stack_mixers1_rev2;
else
spec->mixers[0] = ad1988_6stack_mixers1;
case AD1988_3STACK_DIG:
spec->multiout.max_channels = 6;
spec->multiout.num_dacs = 3;
- if (codec->revision_id == AD1988A_REV2)
+ if (is_rev2(codec))
spec->multiout.dac_nids = ad1988_3stack_dac_nids_rev2;
else
spec->multiout.dac_nids = ad1988_3stack_dac_nids;
spec->channel_mode = ad1988_3stack_modes;
spec->num_channel_mode = ARRAY_SIZE(ad1988_3stack_modes);
spec->num_mixers = 2;
- if (codec->revision_id == AD1988A_REV2)
+ if (is_rev2(codec))
spec->mixers[0] = ad1988_3stack_mixers1_rev2;
else
spec->mixers[0] = ad1988_3stack_mixers1;
[STAC_REF] = ref922x_pin_configs,
[STAC_D945GTP3] = d945gtp3_pin_configs,
[STAC_D945GTP5] = d945gtp5_pin_configs,
+ [STAC_MACMINI] = d945gtp5_pin_configs,
[STAC_D965_2112] = d965_2112_pin_configs,
};
.build_controls = aureon_add_controls,
.eeprom_size = sizeof(aureon71_eeprom),
.eeprom_data = aureon71_eeprom,
- .driver = "Aureon71Universe",
+ .driver = "Aureon71Univ", /* keep in 15 letters */
},
{
.subvendor = VT1724_SUBDEVICE_PRODIGY71,
MODULE_PARM_DESC(dxr_enable, "Enable DXR support for Terratec DMX6FIRE.");
-static struct pci_device_id snd_ice1712_ids[] __devinitdata = {
+static struct pci_device_id snd_ice1712_ids[] = {
{ PCI_VENDOR_ID_ICE, PCI_DEVICE_ID_ICE_1712, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ICE1712 */
{ 0, }
};
/* Both VT1720 and VT1724 have the same PCI IDs */
-static struct pci_device_id snd_vt1724_ids[] __devinitdata = {
+static struct pci_device_id snd_vt1724_ids[] = {
{ PCI_VENDOR_ID_ICE, PCI_DEVICE_ID_VT1724, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ 0, }
};
u32 int_sta_mask; /* interrupt status mask */
};
-static struct pci_device_id snd_intel8x0_ids[] __devinitdata = {
+static struct pci_device_id snd_intel8x0_ids[] = {
{ 0x8086, 0x2415, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82801AA */
{ 0x8086, 0x2425, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82901AB */
{ 0x8086, 0x2445, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82801BA */
.name = "AMD64 Mobo", /* ALC650 */
.type = AC97_TUNE_HP_ONLY
},
+ {
+ .subvendor = 0x10f1,
+ .subdevice = 0x2895,
+ .name = "Tyan Thunder K8WE",
+ .type = AC97_TUNE_HP_ONLY
+ },
{
.subvendor = 0x110a,
.subdevice = 0x0056,
unsigned int pcm_pos_shift;
};
-static struct pci_device_id snd_intel8x0m_ids[] __devinitdata = {
+static struct pci_device_id snd_intel8x0m_ids[] = {
{ 0x8086, 0x2416, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82801AA */
{ 0x8086, 0x2426, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82901AB */
{ 0x8086, 0x2446, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82801BA */
MODULE_PARM_DESC(enable, "Enable Korg 1212 soundcard.");
MODULE_AUTHOR("Haroldo Gamal <gamal@alternex.com.br>");
-static struct pci_device_id snd_korg1212_ids[] __devinitdata = {
+static struct pci_device_id snd_korg1212_ids[] = {
{
.vendor = 0x10b5,
.device = 0x906d,
/*
* pci ids
*/
-static struct pci_device_id snd_m3_ids[] __devinitdata = {
+static struct pci_device_id snd_m3_ids[] = {
{PCI_VENDOR_ID_ESS, PCI_DEVICE_ID_ESS_ALLEGRO_1, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, 0},
{PCI_VENDOR_ID_ESS, PCI_DEVICE_ID_ESS_ALLEGRO, PCI_ANY_ID, PCI_ANY_ID,
* DSP Code images
*/
-static const u16 assp_kernel_image[] __devinitdata = {
+static const u16 assp_kernel_image[] = {
0x7980, 0x0030, 0x7980, 0x03B4, 0x7980, 0x03B4, 0x7980, 0x00FB, 0x7980, 0x00DD, 0x7980, 0x03B4,
0x7980, 0x0332, 0x7980, 0x0287, 0x7980, 0x03B4, 0x7980, 0x03B4, 0x7980, 0x03B4, 0x7980, 0x03B4,
0x7980, 0x031A, 0x7980, 0x03B4, 0x7980, 0x022F, 0x7980, 0x03B4, 0x7980, 0x03B4, 0x7980, 0x03B4,
* Mini sample rate converter code image
* that is to be loaded at 0x400 on the DSP.
*/
-static const u16 assp_minisrc_image[] __devinitdata = {
+static const u16 assp_minisrc_image[] = {
0xBF80, 0x101E, 0x906E, 0x006E, 0x8B88, 0x6980, 0xEF88, 0x906F, 0x0D6F, 0x6900, 0xEB08, 0x0412,
0xBC20, 0x696E, 0xB801, 0x906E, 0x7980, 0x0403, 0xB90E, 0x8807, 0xBE43, 0xBF01, 0xBE47, 0xBE41,
*/
#define MINISRC_LPF_LEN 10
-static const u16 minisrc_lpf[MINISRC_LPF_LEN] __devinitdata = {
+static const u16 minisrc_lpf[MINISRC_LPF_LEN] = {
0X0743, 0X1104, 0X0A4C, 0XF88D, 0X242C,
0X1023, 0X1AA9, 0X0B60, 0XEFDD, 0X186F
};
-static void __devinit snd_m3_assp_init(struct snd_m3 *chip)
+static void snd_m3_assp_init(struct snd_m3 *chip)
{
unsigned int i;
/*
*/
-static struct pci_device_id snd_mixart_ids[] __devinitdata = {
+static struct pci_device_id snd_mixart_ids[] = {
{ 0x1057, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* MC8240 */
{ 0, }
};
/*
* PCI ids
*/
-static struct pci_device_id snd_nm256_ids[] __devinitdata = {
+static struct pci_device_id snd_nm256_ids[] = {
{PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
PCI_ID_LAST
};
-static struct pci_device_id pcxhr_ids[] __devinitdata = {
+static struct pci_device_id pcxhr_ids[] = {
{ 0x10b5, 0x9656, 0x1369, 0xb001, 0, 0, PCI_ID_VX882HR, }, /* VX882HR */
{ 0x10b5, 0x9656, 0x1369, 0xb101, 0, 0, PCI_ID_PCX882HR, }, /* PCX882HR */
{ 0x10b5, 0x9656, 0x1369, 0xb201, 0, 0, PCI_ID_VX881HR, }, /* VX881HR */
/*
*/
-static struct pci_device_id snd_riptide_ids[] __devinitdata = {
+static struct pci_device_id snd_riptide_ids[] = {
{
.vendor = 0x127a,.device = 0x4310,
.subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
struct snd_kcontrol *spdif_ctl;
};
-static struct pci_device_id snd_rme32_ids[] __devinitdata = {
+static struct pci_device_id snd_rme32_ids[] = {
{PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
{PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_8,
struct snd_kcontrol *spdif_ctl;
};
-static struct pci_device_id snd_rme96_ids[] __devinitdata = {
+static struct pci_device_id snd_rme96_ids[] = {
{ PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
{ PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96_8,
}
-static struct pci_device_id snd_hdsp_ids[] __devinitdata = {
+static struct pci_device_id snd_hdsp_ids[] = {
{
.vendor = PCI_VENDOR_ID_XILINX,
.device = PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP,
.trigger = snd_hdsp_midi_input_trigger,
};
-static int __devinit snd_hdsp_create_midi (struct snd_card *card, struct hdsp *hdsp, int id)
+static int snd_hdsp_create_midi (struct snd_card *card, struct hdsp *hdsp, int id)
{
char buf[32];
}
-static struct pci_device_id snd_rme9652_ids[] __devinitdata = {
+static struct pci_device_id snd_rme9652_ids[] = {
{
.vendor = 0x10ee,
.device = 0x3fc4,
#endif
};
-static struct pci_device_id snd_sonic_ids[] __devinitdata = {
+static struct pci_device_id snd_sonic_ids[] = {
{ 0x5333, 0xca00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
{ 0, }
};
module_param_array(wavetable_size, int, NULL, 0444);
MODULE_PARM_DESC(wavetable_size, "Maximum memory size in kB for wavetable synth.");
-static struct pci_device_id snd_trident_ids[] __devinitdata = {
+static struct pci_device_id snd_trident_ids[] = {
{PCI_DEVICE(PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_TRIDENT_4DWAVE_DX),
PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, 0},
{PCI_DEVICE(PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_TRIDENT_4DWAVE_NX),
#endif
};
-static struct pci_device_id snd_via82xx_ids[] __devinitdata = {
+static struct pci_device_id snd_via82xx_ids[] = {
/* 0x1106, 0x3058 */
{ PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA686, }, /* 686A */
/* 0x1106, 0x3059 */
struct snd_info_entry *proc_entry;
};
-static struct pci_device_id snd_via82xx_modem_ids[] __devinitdata = {
+static struct pci_device_id snd_via82xx_modem_ids[] = {
{ 0x1106, 0x3068, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA82XX_MODEM, },
{ 0, }
};
VX_PCI_VX222_NEW
};
-static struct pci_device_id snd_vx222_ids[] __devinitdata = {
+static struct pci_device_id snd_vx222_ids[] = {
{ 0x10b5, 0x9050, 0x1369, PCI_ANY_ID, 0, 0, VX_PCI_VX222_OLD, }, /* PLX */
{ 0x10b5, 0x9030, 0x1369, PCI_ANY_ID, 0, 0, VX_PCI_VX222_NEW, }, /* PLX */
{ 0, }
module_param_array(rear_swap, bool, NULL, 0444);
MODULE_PARM_DESC(rear_swap, "Swap rear channels (must be enabled for correct IEC958 (S/PDIF)) output");
-static struct pci_device_id snd_ymfpci_ids[] __devinitdata = {
+static struct pci_device_id snd_ymfpci_ids[] = {
{ 0x1073, 0x0004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF724 */
{ 0x1073, 0x000d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF724F */
{ 0x1073, 0x000a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF740 */
CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, parse));
link->conf.ConfigBase = parse->config.base;
link->conf.ConfigIndex = 0x5;
- kfree(parse);
CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ kfree(parse);
+
if (snd_pdacf_assign_resources(pdacf, link->io.BasePort1, link->irq.AssignedIRQ) < 0)
goto failed;
return 0;
cs_failed:
+ kfree(parse);
cs_error(link, last_fn, last_ret);
failed:
pcmcia_disable_device(link);
projects / firefly-linux-kernel-4.4.55.git / commitdiff