On some Silvermont-Core/Baytrail-SOC systems,
C1E latency is higher than original specifications.
Although C1E is still enumerated in CPUID.MWAIT.EDX,
we delete the state from intel_idle to avoid latency impact.
Under some conditions, the latency of the C6N-BYT and C6S-BYT states
may exceed the specified values of 40 and 140 usec, respectively.
Increase those values to 300 and 500 usec; to assure
that the hardware does not violate constraints that may be set
by the Linux PM_QOS sub-system.
Also increase the C7-BYT target residency to 4.0 ms from 1.5 ms.
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Kumar P Mahesh <mahesh.kumar.p@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: <stable@vger.kernel.org>
.target_residency = 1,
.enter = &intel_idle,
.enter_freeze = intel_idle_freeze, },
.target_residency = 1,
.enter = &intel_idle,
.enter_freeze = intel_idle_freeze, },
- {
- .name = "C1E-BYT",
- .desc = "MWAIT 0x01",
- .flags = MWAIT2flg(0x01),
- .exit_latency = 15,
- .target_residency = 30,
- .enter = &intel_idle,
- .enter_freeze = intel_idle_freeze, },
{
.name = "C6N-BYT",
.desc = "MWAIT 0x58",
.flags = MWAIT2flg(0x58) | CPUIDLE_FLAG_TLB_FLUSHED,
{
.name = "C6N-BYT",
.desc = "MWAIT 0x58",
.flags = MWAIT2flg(0x58) | CPUIDLE_FLAG_TLB_FLUSHED,
.target_residency = 275,
.enter = &intel_idle,
.enter_freeze = intel_idle_freeze, },
.target_residency = 275,
.enter = &intel_idle,
.enter_freeze = intel_idle_freeze, },
.name = "C6S-BYT",
.desc = "MWAIT 0x52",
.flags = MWAIT2flg(0x52) | CPUIDLE_FLAG_TLB_FLUSHED,
.name = "C6S-BYT",
.desc = "MWAIT 0x52",
.flags = MWAIT2flg(0x52) | CPUIDLE_FLAG_TLB_FLUSHED,
.target_residency = 560,
.enter = &intel_idle,
.enter_freeze = intel_idle_freeze, },
.target_residency = 560,
.enter = &intel_idle,
.enter_freeze = intel_idle_freeze, },
.desc = "MWAIT 0x60",
.flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 1200,
.desc = "MWAIT 0x60",
.flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 1200,
- .target_residency = 1500,
+ .target_residency = 4000,
.enter = &intel_idle,
.enter_freeze = intel_idle_freeze, },
{
.enter = &intel_idle,
.enter_freeze = intel_idle_freeze, },
{