X-Git-Url: http://plrg.eecs.uci.edu/git/?a=blobdiff_plain;f=docs%2FVectorizers.rst;h=65c19aa2bc0cbfa4f7c0c9f88a91c2b2779a7368;hb=b6b29c7c22966cb0139d8d871cf3fdb8e30d4e10;hp=3410f183781a492c408d29d6ca24829265f9ad7a;hpb=00ba3014d8f6694b03997022259e5b266e5e112a;p=oota-llvm.git diff --git a/docs/Vectorizers.rst b/docs/Vectorizers.rst index 3410f183781..65c19aa2bc0 100644 --- a/docs/Vectorizers.rst +++ b/docs/Vectorizers.rst @@ -6,12 +6,14 @@ Auto-Vectorization in LLVM :local: LLVM has two vectorizers: The :ref:`Loop Vectorizer `, -which operates on Loops, and the :ref:`Basic Block Vectorizer -`, which optimizes straight-line code. These vectorizers +which operates on Loops, and the :ref:`SLP Vectorizer +`. These vectorizers focus on different optimization opportunities and use different techniques. -The BB vectorizer merges multiple scalars that are found in the code into -vectors while the Loop Vectorizer widens instructions in the original loop -to operate on multiple consecutive loop iterations. +The SLP vectorizer merges multiple scalars that are found in the code into +vectors while the Loop Vectorizer widens instructions in loops +to operate on multiple consecutive iterations. + +Both the Loop Vectorizer and the SLP Vectorizer are enabled by default. .. _loop-vectorizer: @@ -21,19 +23,116 @@ The Loop Vectorizer Usage ----- -LLVM's Loop Vectorizer is now available and will be useful for many people. -It is not enabled by default, but can be enabled through clang using the -command line flag: +The Loop Vectorizer is enabled by default, but it can be disabled +through clang using the command line flag: + +.. code-block:: console + + $ clang ... -fno-vectorize file.c + +Command line flags +^^^^^^^^^^^^^^^^^^ + +The loop vectorizer uses a cost model to decide on the optimal vectorization factor +and unroll factor. However, users of the vectorizer can force the vectorizer to use +specific values. Both 'clang' and 'opt' support the flags below. + +Users can control the vectorization SIMD width using the command line flag "-force-vector-width". + +.. code-block:: console + + $ clang -mllvm -force-vector-width=8 ... + $ opt -loop-vectorize -force-vector-width=8 ... + +Users can control the unroll factor using the command line flag "-force-vector-unroll" + +.. code-block:: console + + $ clang -mllvm -force-vector-unroll=2 ... + $ opt -loop-vectorize -force-vector-unroll=2 ... + +Pragma loop hint directives +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The ``#pragma clang loop`` directive allows loop vectorization hints to be +specified for the subsequent for, while, do-while, or c++11 range-based for +loop. The directive allows vectorization and interleaving to be enabled or +disabled. Vector width as well as interleave count can also be manually +specified. The following example explicitly enables vectorization and +interleaving: + +.. code-block:: c++ + + #pragma clang loop vectorize(enable) interleave(enable) + while(...) { + ... + } + +The following example implicitly enables vectorization and interleaving by +specifying a vector width and interleaving count: + +.. code-block:: c++ + + #pragma clang loop vectorize_width(2) interleave_count(2) + for(...) { + ... + } + +See the Clang +`language extensions +`_ +for details. + +Diagnostics +----------- + +Many loops cannot be vectorized including loops with complicated control flow, +unvectorizable types, and unvectorizable calls. The loop vectorizer generates +optimization remarks which can be queried using command line options to identify +and diagnose loops that are skipped by the loop-vectorizer. + +Optimization remarks are enabled using: + +``-Rpass=loop-vectorize`` identifies loops that were successfully vectorized. + +``-Rpass-missed=loop-vectorize`` identifies loops that failed vectorization and +indicates if vectorization was specified. + +``-Rpass-analysis=loop-vectorize`` identifies the statements that caused +vectorization to fail. + +Consider the following loop: + +.. code-block:: c++ + + #pragma clang loop vectorize(enable) + for (int i = 0; i < Length; i++) { + switch(A[i]) { + case 0: A[i] = i*2; break; + case 1: A[i] = i; break; + default: A[i] = 0; + } + } + +The command line ``-Rpass-missed=loop-vectorized`` prints the remark: .. code-block:: console - $ clang -fvectorize -O3 file.c + no_switch.cpp:4:5: remark: loop not vectorized: vectorization is explicitly enabled [-Rpass-missed=loop-vectorize] -If the ``-fvectorize`` flag is used then the loop vectorizer will be enabled -when running with ``-O3``, ``-O2``. When ``-Os`` is used, the loop vectorizer -will only vectorize loops that do not require a major increase in code size. +And the command line ``-Rpass-analysis=loop-vectorize`` indicates that the +switch statement cannot be vectorized. -We plan to enable the Loop Vectorizer by default as part of the LLVM 3.3 release. +.. code-block:: console + + no_switch.cpp:4:5: remark: loop not vectorized: loop contains a switch statement [-Rpass-analysis=loop-vectorize] + switch(A[i]) { + ^ + +To ensure line and column numbers are produced include the command line options +``-gline-tables-only`` and ``-gcolumn-info``. See the Clang `user manual +`_ +for details Features -------- @@ -99,6 +198,8 @@ reduction operations, such as addition, multiplication, XOR, AND and OR. return sum; } +We support floating point reduction operations when `-ffast-math` is used. + Inductions ^^^^^^^^^^ @@ -159,16 +260,19 @@ The Loop Vectorizer can vectorize loops that count backwards. Scatter / Gather ^^^^^^^^^^^^^^^^ -The Loop Vectorizer can vectorize code that becomes scatter/gather -memory accesses. +The Loop Vectorizer can vectorize code that becomes a sequence of scalar instructions +that scatter/gathers memory. .. code-block:: c++ - int foo(int *A, int *B, int n, int k) { - for (int i = 0; i < n; ++i) - A[i*7] += B[i*k]; + int foo(int * A, int * B, int n) { + for (intptr_t i = 0; i < n; ++i) + A[i] += B[i * 4]; } +In many situations the cost model will inform LLVM that this is not beneficial +and LLVM will only vectorize such code if forced with "-mllvm -force-vector-width=#". + Vectorization of Mixed Types ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -183,6 +287,25 @@ vectorization is profitable. A[i] += 4 * B[i]; } +Global Structures Alias Analysis +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Access to global structures can also be vectorized, with alias analysis being +used to make sure accesses don't alias. Run-time checks can also be added on +pointer access to structure members. + +Many variations are supported, but some that rely on undefined behaviour being +ignored (as other compilers do) are still being left un-vectorized. + +.. code-block:: c++ + + struct { int A[100], K, B[100]; } Foo; + + int foo() { + for (int i = 0; i < 100; ++i) + Foo.A[i] = Foo.B[i] + 100; + } + Vectorization of function calls ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -203,10 +326,47 @@ See the table below for a list of these functions. | | | fmuladd | +-----+-----+---------+ +The loop vectorizer knows about special instructions on the target and will +vectorize a loop containing a function call that maps to the instructions. For +example, the loop below will be vectorized on Intel x86 if the SSE4.1 roundps +instruction is available. + +.. code-block:: c++ + + void foo(float *f) { + for (int i = 0; i != 1024; ++i) + f[i] = floorf(f[i]); + } + +Partial unrolling during vectorization +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Modern processors feature multiple execution units, and only programs that contain a +high degree of parallelism can fully utilize the entire width of the machine. +The Loop Vectorizer increases the instruction level parallelism (ILP) by +performing partial-unrolling of loops. + +In the example below the entire array is accumulated into the variable 'sum'. +This is inefficient because only a single execution port can be used by the processor. +By unrolling the code the Loop Vectorizer allows two or more execution ports +to be used simultaneously. + +.. code-block:: c++ + + int foo(int *A, int *B, int n) { + unsigned sum = 0; + for (int i = 0; i < n; ++i) + sum += A[i]; + return sum; + } + +The Loop Vectorizer uses a cost model to decide when it is profitable to unroll loops. +The decision to unroll the loop depends on the register pressure and the generated code size. + Performance ----------- -This section shows the the execution time of Clang on a simple benchmark: +This section shows the execution time of Clang on a simple benchmark: `gcc-loops `_. This benchmarks is a collection of loops from the GCC autovectorization `page `_ by Dorit Nuzman. @@ -216,29 +376,22 @@ The Y-axis shows the time in msec. Lower is better. The last column shows the ge .. image:: gcc-loops.png -.. _bb-vectorizer: +And Linpack-pc with the same configuration. Result is Mflops, higher is better. -The Basic Block Vectorizer -========================== +.. image:: linpack-pc.png -Usage ------- +.. _slp-vectorizer: -The Basic Block Vectorizer is not enabled by default, but it can be enabled -through clang using the command line flag: - -.. code-block:: console - - $ clang -fslp-vectorize file.c +The SLP Vectorizer +================== Details ------- -The goal of basic-block vectorization (a.k.a. superword-level parallelism) is -to combine similar independent instructions within simple control-flow regions -into vector instructions. Memory accesses, arithemetic operations, comparison -operations and some math functions can all be vectorized using this technique -(subject to the capabilities of the target architecture). +The goal of SLP vectorization (a.k.a. superword-level parallelism) is +to combine similar independent instructions +into vector instructions. Memory accesses, arithmetic operations, comparison +operations, PHI-nodes, can all be vectorized using this technique. For example, the following function performs very similar operations on its inputs (a1, b1) and (a2, b2). The basic-block vectorizer may combine these @@ -246,10 +399,28 @@ into vector operations. .. code-block:: c++ - int foo(int a1, int a2, int b1, int b2) { - int r1 = a1*(a1 + b1)/b1 + 50*b1/a1; - int r2 = a2*(a2 + b2)/b2 + 50*b2/a2; - return r1 + r2; + void foo(int a1, int a2, int b1, int b2, int *A) { + A[0] = a1*(a1 + b1)/b1 + 50*b1/a1; + A[1] = a2*(a2 + b2)/b2 + 50*b2/a2; } +The SLP-vectorizer processes the code bottom-up, across basic blocks, in search of scalars to combine. + +Usage +------ + +The SLP Vectorizer is enabled by default, but it can be disabled +through clang using the command line flag: + +.. code-block:: console + + $ clang -fno-slp-vectorize file.c + +LLVM has a second basic block vectorization phase +which is more compile-time intensive (The BB vectorizer). This optimization +can be enabled through clang using the command line flag: + +.. code-block:: console + + $ clang -fslp-vectorize-aggressive file.c