X-Git-Url: http://plrg.eecs.uci.edu/git/?a=blobdiff_plain;f=arch%2Fx86%2Fkernel%2Fhead_32.S;h=d42ab17b739729c4b27d3f3fe02fdea2633f2f5a;hb=731a7378b81c2f5fa88ca1ae20b83d548d5613dc;hp=ce0be7cd085e025759da9b1fd6445d34e7772de0;hpb=fa514fbc57419505d0e9423dbb8742f2775f882e;p=firefly-linux-kernel-4.4.55.git diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index ce0be7cd085e..d42ab17b7397 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -21,6 +21,7 @@ #include #include #include +#include /* Physical address */ #define pa(X) ((X) - __PAGE_OFFSET) @@ -273,10 +274,7 @@ num_subarch_entries = (. - subarch_entries) / 4 * If cpu hotplug is not supported then this code can go in init section * which will be freed later */ - __CPUINIT - -#ifdef CONFIG_SMP ENTRY(startup_32_smp) cld movl $(__BOOT_DS),%eax @@ -287,7 +285,7 @@ ENTRY(startup_32_smp) movl pa(stack_start),%ecx movl %eax,%ss leal -__PAGE_OFFSET(%ecx),%esp -#endif /* CONFIG_SMP */ + default_entry: /* @@ -363,28 +361,23 @@ default_entry: pushl $0 popfl -#ifdef CONFIG_SMP - cmpb $0, ready - jnz checkCPUtype -#endif /* CONFIG_SMP */ - /* * start system 32-bit setup. We need to re-do some of the things done * in 16-bit mode for the "real" operations. */ - call setup_idt - -checkCPUtype: - - movl $-1,X86_CPUID # -1 for no CPUID initially - + movl setup_once_ref,%eax + andl %eax,%eax + jz 1f # Did we do this already? + call *%eax +1: + /* check if it is 486 or 386. */ /* * XXX - this does a lot of unnecessary setup. Alignment checks don't * apply at our cpl of 0 and the stack ought to be aligned already, and * we don't need to preserve eflags. */ - + movl $-1,X86_CPUID # -1 for no CPUID initially movb $3,X86 # at least 386 pushfl # push EFLAGS popl %eax # get EFLAGS @@ -450,21 +443,6 @@ is386: movl $2,%ecx # set MP movl $(__KERNEL_PERCPU), %eax movl %eax,%fs # set this cpu's percpu -#ifdef CONFIG_CC_STACKPROTECTOR - /* - * The linker can't handle this by relocation. Manually set - * base address in stack canary segment descriptor. - */ - cmpb $0,ready - jne 1f - movl $gdt_page,%eax - movl $stack_canary,%ecx - movw %cx, 8 * GDT_ENTRY_STACK_CANARY + 2(%eax) - shrl $16, %ecx - movb %cl, 8 * GDT_ENTRY_STACK_CANARY + 4(%eax) - movb %ch, 8 * GDT_ENTRY_STACK_CANARY + 7(%eax) -1: -#endif movl $(__KERNEL_STACK_CANARY),%eax movl %eax,%gs @@ -473,7 +451,6 @@ is386: movl $2,%ecx # set MP cld # gcc2 wants the direction flag cleared at all times pushl $0 # fake return address for unwinder - movb $1, ready jmp *(initial_code) /* @@ -495,81 +472,122 @@ check_x87: .byte 0xDB,0xE4 /* fsetpm for 287, ignored by 387 */ ret + +#include "verify_cpu.S" + /* - * setup_idt + * setup_once * - * sets up a idt with 256 entries pointing to - * ignore_int, interrupt gates. It doesn't actually load - * idt - that can be done only after paging has been enabled - * and the kernel moved to PAGE_OFFSET. Interrupts - * are enabled elsewhere, when we can be relatively - * sure everything is ok. + * The setup work we only want to run on the BSP. * * Warning: %esi is live across this function. */ -setup_idt: - lea ignore_int,%edx - movl $(__KERNEL_CS << 16),%eax - movw %dx,%ax /* selector = 0x0010 = cs */ - movw $0x8E00,%dx /* interrupt gate - dpl=0, present */ +__INIT +setup_once: + /* + * Set up a idt with 256 entries pointing to ignore_int, + * interrupt gates. It doesn't actually load idt - that needs + * to be done on each CPU. Interrupts are enabled elsewhere, + * when we can be relatively sure everything is ok. + */ - lea idt_table,%edi - mov $256,%ecx -rp_sidt: + movl $idt_table,%edi + movl $early_idt_handlers,%eax + movl $NUM_EXCEPTION_VECTORS,%ecx +1: movl %eax,(%edi) - movl %edx,4(%edi) + movl %eax,4(%edi) + /* interrupt gate, dpl=0, present */ + movl $(0x8E000000 + __KERNEL_CS),2(%edi) + addl $9,%eax addl $8,%edi - dec %ecx - jne rp_sidt + loop 1b -.macro set_early_handler handler,trapno - lea \handler,%edx + movl $256 - NUM_EXCEPTION_VECTORS,%ecx + movl $ignore_int,%edx movl $(__KERNEL_CS << 16),%eax - movw %dx,%ax + movw %dx,%ax /* selector = 0x0010 = cs */ movw $0x8E00,%dx /* interrupt gate - dpl=0, present */ - lea idt_table,%edi - movl %eax,8*\trapno(%edi) - movl %edx,8*\trapno+4(%edi) -.endm +2: + movl %eax,(%edi) + movl %edx,4(%edi) + addl $8,%edi + loop 2b - set_early_handler handler=early_divide_err,trapno=0 - set_early_handler handler=early_illegal_opcode,trapno=6 - set_early_handler handler=early_protection_fault,trapno=13 - set_early_handler handler=early_page_fault,trapno=14 +#ifdef CONFIG_CC_STACKPROTECTOR + /* + * Configure the stack canary. The linker can't handle this by + * relocation. Manually set base address in stack canary + * segment descriptor. + */ + movl $gdt_page,%eax + movl $stack_canary,%ecx + movw %cx, 8 * GDT_ENTRY_STACK_CANARY + 2(%eax) + shrl $16, %ecx + movb %cl, 8 * GDT_ENTRY_STACK_CANARY + 4(%eax) + movb %ch, 8 * GDT_ENTRY_STACK_CANARY + 7(%eax) +#endif + andl $0,setup_once_ref /* Once is enough, thanks */ ret -early_divide_err: - xor %edx,%edx - pushl $0 /* fake errcode */ - jmp early_fault +ENTRY(early_idt_handlers) + # 36(%esp) %eflags + # 32(%esp) %cs + # 28(%esp) %eip + # 24(%rsp) error code + i = 0 + .rept NUM_EXCEPTION_VECTORS + .if (EXCEPTION_ERRCODE_MASK >> i) & 1 + ASM_NOP2 + .else + pushl $0 # Dummy error code, to make stack frame uniform + .endif + pushl $i # 20(%esp) Vector number + jmp early_idt_handler + i = i + 1 + .endr +ENDPROC(early_idt_handlers) + + /* This is global to keep gas from relaxing the jumps */ +ENTRY(early_idt_handler) + cld + cmpl $2,%ss:early_recursion_flag + je hlt_loop + incl %ss:early_recursion_flag -early_illegal_opcode: - movl $6,%edx - pushl $0 /* fake errcode */ - jmp early_fault + push %eax # 16(%esp) + push %ecx # 12(%esp) + push %edx # 8(%esp) + push %ds # 4(%esp) + push %es # 0(%esp) + movl $(__KERNEL_DS),%eax + movl %eax,%ds + movl %eax,%es -early_protection_fault: - movl $13,%edx - jmp early_fault + cmpl $(__KERNEL_CS),32(%esp) + jne 10f -early_page_fault: - movl $14,%edx - jmp early_fault + leal 28(%esp),%eax # Pointer to %eip + call early_fixup_exception + andl %eax,%eax + jnz ex_entry /* found an exception entry */ -early_fault: - cld +10: #ifdef CONFIG_PRINTK - pusha - movl $(__KERNEL_DS),%eax - movl %eax,%ds - movl %eax,%es - cmpl $2,early_recursion_flag - je hlt_loop - incl early_recursion_flag + xorl %eax,%eax + movw %ax,2(%esp) /* clean up the segment values on some cpus */ + movw %ax,6(%esp) + movw %ax,34(%esp) + leal 40(%esp),%eax + pushl %eax /* %esp before the exception */ + pushl %ebx + pushl %ebp + pushl %esi + pushl %edi movl %cr2,%eax pushl %eax - pushl %edx /* trapno */ + pushl (20+6*4)(%esp) /* trapno */ pushl $fault_msg call printk #endif @@ -578,6 +596,17 @@ hlt_loop: hlt jmp hlt_loop +ex_entry: + pop %es + pop %ds + pop %edx + pop %ecx + pop %eax + addl $8,%esp /* drop vector number and error code */ + decl %ss:early_recursion_flag + iret +ENDPROC(early_idt_handler) + /* This is the default interrupt "handler" :-) */ ALIGN ignore_int: @@ -611,13 +640,18 @@ ignore_int: popl %eax #endif iret +ENDPROC(ignore_int) +__INITDATA + .align 4 +early_recursion_flag: + .long 0 -#include "verify_cpu.S" - - __REFDATA -.align 4 +__REFDATA + .align 4 ENTRY(initial_code) .long i386_start_kernel +ENTRY(setup_once_ref) + .long setup_once /* * BSS section @@ -670,22 +704,19 @@ ENTRY(initial_page_table) ENTRY(stack_start) .long init_thread_union+THREAD_SIZE -early_recursion_flag: - .long 0 - -ready: .byte 0 - +__INITRODATA int_msg: .asciz "Unknown interrupt or fault at: %p %p %p\n" fault_msg: /* fault info: */ .ascii "BUG: Int %d: CR2 %p\n" -/* pusha regs: */ - .ascii " EDI %p ESI %p EBP %p ESP %p\n" - .ascii " EBX %p EDX %p ECX %p EAX %p\n" +/* regs pushed in early_idt_handler: */ + .ascii " EDI %p ESI %p EBP %p EBX %p\n" + .ascii " ESP %p ES %p DS %p\n" + .ascii " EDX %p ECX %p EAX %p\n" /* fault frame: */ - .ascii " err %p EIP %p CS %p flg %p\n" + .ascii " vec %p err %p EIP %p CS %p flg %p\n" .ascii "Stack: %p %p %p %p %p %p %p %p\n" .ascii " %p %p %p %p %p %p %p %p\n" .asciz " %p %p %p %p %p %p %p %p\n" @@ -699,6 +730,7 @@ fault_msg: * segment size, and 32-bit linear address value: */ + .data .globl boot_gdt_descr .globl idt_descr