X-Git-Url: http://plrg.eecs.uci.edu/git/?a=blobdiff_plain;f=arch%2Farm%2Fboot%2Fdts%2Fsun7i-a20-cubietruck.dts;h=cb25d3c8da5833bae48d777325be4081b11bedb8;hb=22b3b9578da730272d5ca2f3bbf718c7324ff27e;hp=f9dcb61a5305b08b8ef1c50352401bc2e9ba9487;hpb=e19b9137142988bec5a76c5f8bdf12a77ea802b0;p=firefly-linux-kernel-4.4.55.git

diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index f9dcb61a5305..cb25d3c8da58 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -13,13 +13,48 @@
 
 /dts-v1/;
 /include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
 
 / {
 	model = "Cubietech Cubietruck";
 	compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
 
 	soc@01c00000 {
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			target-supply = <&reg_ahci_5v>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
 		pinctrl@01c20800 {
+			ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
+				allwinner,pins = "PH12";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
 			led_pins_cubietruck: led_pins@0 {
 				allwinner,pins = "PH7", "PH11", "PH20", "PH21";
 				allwinner,function = "gpio_out";
@@ -51,6 +86,18 @@
 			pinctrl-0 = <&i2c2_pins_a>;
 			status = "okay";
 		};
+
+		gmac: ethernet@01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_rgmii_a>;
+			phy = <&phy1>;
+			phy-mode = "rgmii";
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
 	};
 
 	leds {
@@ -78,4 +125,18 @@
 			gpios = <&pio 7 7 0>;
 		};
 	};
+
+	reg_ahci_5v: ahci-5v {
+		pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
+		gpio = <&pio 7 12 0>;
+		status = "okay";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
 };