X-Git-Url: http://plrg.eecs.uci.edu/git/?a=blobdiff_plain;f=Makefile.config.in;h=b98ebc6f017dcb294b8da50171852cd2041e2f0a;hb=3a34f5e1159409ed48cc961335b086d75a2d0ff1;hp=de4732d931a9cb4f21dab6aa84a2a5c7967c4792;hpb=0057e32730eba044e8a587bf29cddf65236e8840;p=oota-llvm.git diff --git a/Makefile.config.in b/Makefile.config.in index de4732d931a..b98ebc6f017 100644 --- a/Makefile.config.in +++ b/Makefile.config.in @@ -1,171 +1,423 @@ -#===-- Makefile.config - Local configuration for LLVM ------*- makefile -*--==== +#===-- Makefile.config - Local configuration for LLVM ------*- Makefile -*--===# +# +# The LLVM Compiler Infrastructure +# +# This file is distributed under the University of Illinois Open Source +# License. See LICENSE.TXT for details. +# +#===------------------------------------------------------------------------===# # # This file is included by Makefile.common. It defines paths and other # values specific to a particular installation of LLVM. -#===-----------------------------------------------------------------------==== +# +#===------------------------------------------------------------------------===# +# Define LLVM specific info and directories based on the autoconf variables +LLVMPackageName := @PACKAGE_TARNAME@ +LLVMVersion := @PACKAGE_VERSION@ +LLVM_VERSION_MAJOR := @LLVM_VERSION_MAJOR@ +LLVM_VERSION_MINOR := @LLVM_VERSION_MINOR@ +LLVM_VERSION_PATCH := @LLVM_VERSION_PATCH@ +LLVM_VERSION_SUFFIX := @LLVM_VERSION_SUFFIX@ +LLVM_CONFIGTIME := @LLVM_CONFIGTIME@ + +########################################################################### +# Directory Configuration +# This section of the Makefile determines what is where. To be +# specific, there are several locations that need to be defined: +# +# o LLVM_SRC_ROOT : The root directory of the LLVM source code. +# o LLVM_OBJ_ROOT : The root directory containing the built LLVM code. +# +# o PROJ_SRC_DIR : The directory containing the code to build. +# o PROJ_SRC_ROOT : The root directory of the code to build. # -# Target operating system for which LLVM will be compiled. +# o PROJ_OBJ_DIR : The directory in which compiled code will be placed. +# o PROJ_OBJ_ROOT : The root directory in which compiled code is placed. # +########################################################################### + +PWD := @BINPWD@ +# Set the project name to LLVM if its not defined +ifndef PROJECT_NAME +PROJECT_NAME := $(LLVMPackageName) +endif + +# The macro below is expanded when 'realpath' is not built-in. +# Built-in 'realpath' is available on GNU Make 3.81. +realpath = $(shell cd $(1); $(PWD)) + +PROJ_OBJ_DIR := $(call realpath, .) +PROJ_OBJ_ROOT := $(call realpath, $(PROJ_OBJ_DIR)/$(LEVEL)) + +CLANG_SRC_ROOT := @CLANG_SRC_ROOT@ + +ifeq ($(PROJECT_NAME),$(LLVMPackageName)) +LLVM_SRC_ROOT := $(call realpath, @abs_top_srcdir@) +LLVM_OBJ_ROOT := $(call realpath, @abs_top_builddir@) +PROJ_SRC_ROOT := $(LLVM_SRC_ROOT) +PROJ_SRC_DIR := $(LLVM_SRC_ROOT)$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)) + +ifneq ($(CLANG_SRC_ROOT),) + CLANG_SRC_ROOT:= $(call realpath, $(CLANG_SRC_ROOT)) + PROJ_SRC_DIR := $(patsubst $(LLVM_SRC_ROOT)/tools/clang%,$(CLANG_SRC_ROOT)%,$(PROJ_SRC_DIR)) +endif + +prefix := @prefix@ +PROJ_prefix := $(prefix) +program_prefix := @program_prefix@ +PROJ_VERSION := $(LLVMVersion) +else +ifndef PROJ_SRC_ROOT +$(error Projects must define PROJ_SRC_ROOT) +endif +ifndef PROJ_OBJ_ROOT +$(error Projects must define PROJ_OBJ_ROOT) +endif +ifndef PROJ_INSTALL_ROOT +$(error Projects must define PROJ_INSTALL_ROOT) +endif +ifndef LLVM_SRC_ROOT +$(error Projects must define LLVM_SRC_ROOT) +endif +ifndef LLVM_OBJ_ROOT +$(error Projects must define LLVM_OBJ_ROOT) +endif +PROJ_SRC_DIR := $(call realpath, $(PROJ_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR))) +prefix := $(PROJ_INSTALL_ROOT) +PROJ_prefix := $(prefix) +ifndef PROJ_VERSION +PROJ_VERSION := 1.0 +endif +endif + +INTERNAL_PREFIX := @INTERNAL_PREFIX@ +ifneq ($(INTERNAL_PREFIX),) +PROJ_internal_prefix := $(INTERNAL_PREFIX) +else +PROJ_internal_prefix := $(prefix) +endif + +PROJ_bindir := $(PROJ_prefix)/bin +PROJ_libdir := $(PROJ_prefix)/lib +PROJ_datadir := $(PROJ_prefix)/share +PROJ_docsdir := $(PROJ_prefix)/docs/llvm +PROJ_etcdir := $(PROJ_prefix)/etc/llvm +PROJ_includedir := $(PROJ_prefix)/include +PROJ_infodir := $(PROJ_prefix)/info +PROJ_mandir := $(PROJ_prefix)/share/man + +# Determine if we're on a unix type operating system +LLVM_ON_UNIX:=@LLVM_ON_UNIX@ +LLVM_ON_WIN32:=@LLVM_ON_WIN32@ + +# Host operating system for which LLVM will be run. OS=@OS@ +HOST_OS=@HOST_OS@ +# Target operating system for which LLVM will compile for. +TARGET_OS=@TARGET_OS@ -# +# Host hardware architecture +HOST_ARCH=@HOST_ARCH@ # Target hardware architecture -# ARCH=@ARCH@ +TARGET_NATIVE_ARCH := $(ARCH) +LLVM_NATIVE_ARCH := @LLVM_NATIVE_ARCH@ + +# Indicates, whether we're cross-compiling LLVM or not +LLVM_CROSS_COMPILING=@LLVM_CROSS_COMPILING@ + +# Executable file extension for build platform (mainly for +# tablegen call if we're cross-compiling). +BUILD_EXEEXT=@BUILD_EXEEXT@ + +# Compilers for the build platflorm (mainly for tablegen +# call if we're cross-compiling). +BUILD_CC=@BUILD_CC@ +BUILD_CXX=@BUILD_CXX@ + +# Triple for configuring build tools when cross-compiling +BUILD_TRIPLE=@build@ + +# Target triple (cpu-vendor-os) which LLVM is compiled for +HOST_TRIPLE=@host@ + +# Target triple (cpu-vendor-os) for which we should generate code +TARGET_TRIPLE=@target@ + +# Extra options to compile LLVM with +EXTRA_OPTIONS=@EXTRA_OPTIONS@ + +# Extra options to link LLVM with +EXTRA_LD_OPTIONS=@EXTRA_LD_OPTIONS@ + +# Endian-ness of the target +ENDIAN=@ENDIAN@ # Path to the C++ compiler to use. This is an optional setting, which defaults # to whatever your gmake defaults to. -# -# Under Linux, for some reason the compiler driver wants to search the PATH to -# find the system assembler, which breaks if the LLVM assembler is in our path. -# Hack it to use the assembler in /usr/bin directly. -# CXX = @CXX@ -# We have the same problem with the CC binary, which use used by testcases for -# native builds. -# +# Path to the CC binary, which use used by testcases for native builds. CC := @CC@ -# -# Compilation flags for the C and C++ compilers. -# +# C/C++ preprocessor flags. +CPPFLAGS += @CPPFLAGS@ -# -# Removing the compiler flags for now. They interfere with the test suite -# (which has its own autoconf stuff), and we don't use -DHAVE_CONFIG_H anyway. -# -#CPPFLAGS+=@DEFS@ -#CCFLAGS+=@DEFS@ -LDFLAGS+=@LDFLAGS@ +# C compiler flags. +CFLAGS += @CFLAGS@ -# -# Removed since it prevents the tests from working properly. -# -#LIBS+=@LIBS@ +# C++ compiler flags. +CXXFLAGS += @CXXFLAGS@ -# -# Libraries needed by tools -# -TOOLLINKOPTS=@LIBS@ +# Linker flags. +LDFLAGS += @LDFLAGS@ -# -# Path to the archiver program. -# +# Path to the library archiver program. AR_PATH = @AR@ +AR = @AR@ -# -# The pathnames of the Flex and Bison programs, respectively. -# -BISON = @YACC@ -FLEX = @LEX@ +# Path to the nm program +NM_PATH = @NM@ -# -# Paths to miscellaneous programs. -# -SED = @SED@ -RM = @RM@ -ECHO = @ECHO@ -MKDIR = @abs_top_srcdir@/autoconf/mkinstalldirs -DATE = @DATE@ -MV = @MV@ -INSTALL = @INSTALL@ -DOT = @DOT@ -ETAGS = @ETAGS@ +# The pathnames of the programs we require to build +CMP := @CMP@ +CP := @CP@ +DATE := @DATE@ +FIND := @FIND@ +GREP := @GREP@ +INSTALL := @INSTALL@ +MKDIR := $(LLVM_SRC_ROOT)/autoconf/mkinstalldirs +MV := @MV@ +RANLIB := @RANLIB@ +RM := @RM@ +SED := @SED@ +TAR := @TAR@ +PYTHON := @PYTHON@ -# -# Determine the target for which LLVM should generate code. -# -LLVMGCCARCH := @target@/3.4-llvm +# Paths to miscellaneous programs we hope are present but might not be +BZIP2 := @BZIP2@ +CAT := @CAT@ +DOT := @DOT@ +DOXYGEN := @DOXYGEN@ +GROFF := @GROFF@ +GZIPBIN := @GZIPBIN@ +OCAMLC := @OCAMLC@ +OCAMLOPT := @OCAMLOPT@ +OCAMLDEP := @OCAMLDEP@ +OCAMLDOC := @OCAMLDOC@ +GAS := @GAS@ +POD2HTML := @POD2HTML@ +POD2MAN := @POD2MAN@ +PDFROFF := @PDFROFF@ +ZIP := @ZIP@ + +HAVE_LIBZ := @HAVE_LIBZ@ +HAVE_DLOPEN := @HAVE_DLOPEN@ +HAVE_PTHREAD := @HAVE_PTHREAD@ +HAVE_TERMINFO := @HAVE_TERMINFO@ + +LIBS := @LIBS@ + +# Targets that are possible to build +ALL_TARGETS := @ALL_TARGETS@ + +# Targets that we should build +TARGETS_TO_BUILD=@TARGETS_TO_BUILD@ + +# Targets supporting JIT +TARGETS_WITH_JIT := @TARGETS_WITH_JIT@ # Path to directory where object files should be stored during a build. # Set OBJ_ROOT to "." if you do not want to use a separate place for # object files. -# -#OBJ_ROOT = . -OBJ_ROOT := @OBJROOT@ +OBJ_ROOT := . -# Path to location for LLVM front-end this should only be specified here if you -# want to override the value set in Makefile.$(uname) -# -LLVMGCCDIR := @LLVMGCCDIR@ +# What to pass as rpath flag to g++ +RPATH := @RPATH@ -# When this setting is set to true, programs in the llvm/test/Programs hierarchy -# are not recompiled from source code. Instead, the bytecode for the file is -# pulled from the BYTECODE_REPOSITORY directory. This can be useful when disk -# space is limited or when you just don't want to spend time running the C -# frontend. -# -#USE_PRECOMPILED_BYTECODE := 1 -@UPB@ +# What to pass as -rdynamic flag to g++ +RDYNAMIC := @RDYNAMIC@ -# This path specifies the cannonical location of bytecode files for compiled -# versions of the test/Programs/* programs. This is used as the bytecode source -# when USE_PRECOMPILED_BYTECODE is specified or when source code is not -# available for the program (such as SPEC). -# -BYTECODE_REPOSITORY := @BCR@ +# These are options that can either be enabled here, or can be enabled on the +# make command line (ie, make ENABLE_PROFILING=1): -# Path to location for purify, this is only needed if you build with -# ENABLE_PURIFY=1 -# -PURIFY = @PURIFY@ +# When ENABLE_LIBCPP is enabled, LLVM uses libc++ by default to build. +#ENABLE_LIBCPP = 0 +ENABLE_LIBCPP = @ENABLE_LIBCPP@ -# -# SPEC benchmarks: -# Set the USE_SPEC variable to enable the use of the SPEC benchmarks. -# You must provide the SPEC benchmarks on your own. -# -@USE_SPEC@ +# When ENABLE_CXX1Y is enabled, LLVM uses c++1y mode by default to build. +# Otherwise it uses the baseline c++11. +ENABLE_CXX1Y = @ENABLE_CXX1Y@ -# -# Path to the SPEC benchmarks. If you have the SPEC benchmarks, place the -# path here. -# -#SPEC_ROOT := /home/vadve/shared/benchmarks/speccpu2000/benchspec -SPEC_ROOT := @SPEC_ROOT@ +# When ENABLE_SPLIT_DWARF is enabled, LLVM uses -gfission to build in debug mode. +ENABLE_SPLIT_DWARF = @ENABLE_SPLIT_DWARF@ -# -# Path to the PAPI code. This is used by the reoptimizer only. -# -#PAPIDIR := /home/vadve/shared/papi-2.3.4.1 -PAPIDIR := @PAPIDIR@ +# When enabled, clang will have plugin support. +CLANG_PLUGIN_SUPPORT = @CLANG_PLUGIN_SUPPORT@ -# These are options that can either be enabled here, or can be enabled on the -# make command line (ie, make ENABLE_PROFILING=1) -# +# When ENABLE_CLANG_ARCMT is enabled, clang will have ARCMigrationTool. +ENABLE_CLANG_ARCMT = @ENABLE_CLANG_ARCMT@ -# When ENABLE_OPTIMIZED is enabled, Release builds of all of the LLVM code are -# turned on, and Debug builds are turned off. -# +# When ENABLE_CLANG_STATIC_ANALYZER is enabled, clang will have StaticAnalyzer. +ENABLE_CLANG_STATIC_ANALYZER = @ENABLE_CLANG_STATIC_ANALYZER@ + +# When ENABLE_WERROR is enabled, we'll pass -Werror on the command line +ENABLE_WERROR = @ENABLE_WERROR@ + +# When ENABLE_TERMINFO is enabled, we use terminfo. +ENABLE_TERMINFO = @ENABLE_TERMINFO@ + +# When ENABLE_OPTIMIZED is enabled, LLVM code is optimized and output is put +# into the "Release" directories. Otherwise, LLVM code is not optimized and +# output is put in the "Debug" directories. #ENABLE_OPTIMIZED = 1 @ENABLE_OPTIMIZED@ +# When ENABLE_PROFILING is enabled, profile instrumentation is done +# and output is put into the "+Profile" directories, where +# is either Debug or Release depending on how other build +# flags are set. Otherwise, output is put in the +# directories. +#ENABLE_PROFILING = 1 +@ENABLE_PROFILING@ + +# When DISABLE_ASSERTIONS is enabled, builds of all of the LLVM code will +# exclude assertion checks, otherwise they are included. +#DISABLE_ASSERTIONS = 1 +@DISABLE_ASSERTIONS@ + +# When ENABLE_EXPENSIVE_CHECKS is enabled, builds of all of the LLVM +# code will include expensive checks, otherwise they are excluded. +#ENABLE_EXPENSIVE_CHECKS = 0 +@ENABLE_EXPENSIVE_CHECKS@ + +# When DEBUG_RUNTIME is enabled, the runtime libraries will retain debug +# symbols. +#DEBUG_RUNTIME = 1 +@DEBUG_RUNTIME@ + +# When DEBUG_SYMBOLS is enabled, the compiler libraries will retain debug +# symbols. +#DEBUG_SYMBOLS = 1 +@DEBUG_SYMBOLS@ + +# When KEEP_SYMBOLS is enabled, installed executables will never have their +# symbols stripped. +#KEEP_SYMBOLS = 1 +@KEEP_SYMBOLS@ + +# The compiler flags to use for optimized builds. +OPTIMIZE_OPTION := @OPTIMIZE_OPTION@ + # When ENABLE_PROFILING is enabled, the llvm source base is built with profile # information to allow gprof to be used to get execution frequencies. -# #ENABLE_PROFILING = 1 -# +# When ENABLE_DOCS is disabled, docs/ will not be built. +ENABLE_DOCS = @ENABLE_DOCS@ + +# When ENABLE_DOXYGEN is enabled, the doxygen documentation will be built +ENABLE_DOXYGEN = @ENABLE_DOXYGEN@ + +# Do we want to enable threads? +ENABLE_THREADS := @LLVM_ENABLE_THREADS@ + +# Do we want to enable zlib? +ENABLE_ZLIB := @LLVM_ENABLE_ZLIB@ + +# Do we want to build with position independent code? +ENABLE_PIC := @ENABLE_PIC@ + +# Do we want to build a shared library and link the tools with it? +ENABLE_SHARED := @ENABLE_SHARED@ + +# Do we want to link the stdc++ into a shared library? (Cygming) +ENABLE_EMBED_STDCXX := @ENABLE_EMBED_STDCXX@ + +# Use -fvisibility-inlines-hidden? +ENABLE_VISIBILITY_INLINES_HIDDEN := @ENABLE_VISIBILITY_INLINES_HIDDEN@ + +# Do we want to allow timestamping information into builds? +ENABLE_TIMESTAMPS := @ENABLE_TIMESTAMPS@ + # This option tells the Makefiles to produce verbose output. # It essentially prints the commands that make is executing -# #VERBOSE = 1 -# When ENABLE_PURIFY is set to 1, the LLVM tools are linked with purify (which -# must be locally installed) to allow for some automated memory error debugging. -# -#ENABLE_PURIFY = 1 -@ENABLE_PURIFY@ - -# # Enable JIT for this platform -# -@JIT@ +TARGET_HAS_JIT = @TARGET_HAS_JIT@ -# -# Disable LLC diffs for testing. -# -@DISABLE_LLC_DIFFS@ +# Shared library extension for host platform. +SHLIBEXT = @SHLIBEXT@ + +# Executable file extension for host platform. +EXEEXT = @EXEEXT@ + +# Things we just assume are "there" +ECHO := echo + +# Get the options for causing archives to link all their content instead of +# just missing symbols, and the inverse of that. This is used for certain LLVM +# tools that permit loadable modules. It ensures that the LLVM symbols will be +# available to those loadable modules. +LINKALL := @LINKALL@ +NOLINKALL := @NOLINKALL@ + +# Get the value of HUGE_VAL_SANITY which will be either "yes" or "no" depending +# on the check. +HUGE_VAL_SANITY = @HUGE_VAL_SANITY@ + +# Bindings that we should build +BINDINGS_TO_BUILD := @BINDINGS_TO_BUILD@ +ALL_BINDINGS := @ALL_BINDINGS@ +OCAML_LIBDIR := @OCAML_LIBDIR@ + +# When compiling under Mingw/Cygwin, executables such as tblgen +# expect Windows paths, whereas the build system uses Unix paths. +# The function SYSPATH transforms Unix paths into Windows paths. +ifneq (,$(findstring -mno-cygwin, $(CXX))) + SYSPATH = $(shell echo $(1) | cygpath -m -f -) +else + SYSPATH = $(1) +endif + +# Location of the plugin header file for gold. +BINUTILS_INCDIR := @BINUTILS_INCDIR@ + +# Optional flags supported by the compiler +# -Wno-missing-field-initializers +NO_MISSING_FIELD_INITIALIZERS = @NO_MISSING_FIELD_INITIALIZERS@ +# -Wno-variadic-macros +NO_VARIADIC_MACROS = @NO_VARIADIC_MACROS@ +# -Wcovered-switch-default +COVERED_SWITCH_DEFAULT = @COVERED_SWITCH_DEFAULT@ +# -Wno-uninitialized +NO_UNINITIALIZED = @NO_UNINITIALIZED@ +# -Wno-maybe-uninitialized +NO_MAYBE_UNINITIALIZED = @NO_MAYBE_UNINITIALIZED@ + +# Was polly found in tools/polly? +LLVM_HAS_POLLY = @LLVM_HAS_POLLY@ +# Flags supported by the linker. +# bfd ld / gold --version-script=file +HAVE_LINK_VERSION_SCRIPT = @HAVE_LINK_VERSION_SCRIPT@ + +# Flags to control using libxml2 +LIBXML2_LIBS := @LIBXML2_LIBS@ +LIBXML2_INC := @LIBXML2_INC@ + +# Flags to control building support for Intel JIT Events API +USE_INTEL_JITEVENTS := @USE_INTEL_JITEVENTS@ +INTEL_JITEVENTS_INCDIR := @INTEL_JITEVENTS_INCDIR@ +INTEL_JITEVENTS_LIBDIR := @INTEL_JITEVENTS_LIBDIR@ + +# Flags to control building support for OProfile JIT API +USE_OPROFILE := @USE_OPROFILE@ +ifeq ($(USE_INTEL_JITEVENTS), 1) + OPTIONAL_COMPONENTS += IntelJITEvents +endif +ifeq ($(USE_OPROFILE), 1) + OPTIONAL_COMPONENTS += OProfileJIT +endif