X-Git-Url: http://plrg.eecs.uci.edu/git/?a=blobdiff_plain;f=Makefile.config.in;h=3c8d59bd07d92ff0d040c7c85df968a813268e10;hb=4411de1082d27769a1621aaa0f732aacfa73f5c5;hp=9480219db8e9875ef499ec840dd2424e09a535fb;hpb=b812e76b56f96815c08b850fd688ff835862b22a;p=oota-llvm.git

diff --git a/Makefile.config.in b/Makefile.config.in
index 9480219db8e..3c8d59bd07d 100644
--- a/Makefile.config.in
+++ b/Makefile.config.in
@@ -2,91 +2,78 @@
 #
 # This file is included by Makefile.common.  It defines paths and other
 # values specific to a particular installation of LLVM.
+#
 #===-----------------------------------------------------------------------====
 
-#
 # Target operating system for which LLVM will be compiled.
-#
 OS=@OS@
 
+# Target hardware architecture
+ARCH=@ARCH@
+
+# Endian-ness of the target
+ENDIAN=@ENDIAN@
+
 # Path to the C++ compiler to use.  This is an optional setting, which defaults
 # to whatever your gmake defaults to.
 #
 # Under Linux, for some reason the compiler driver wants to search the PATH to
 # find the system assembler, which breaks if the LLVM assembler is in our path.
 # Hack it to use the assembler in /usr/bin directly.
-#
 CXX = @CXX@
 
 # We have the same problem with the CC binary, which use used by testcases for
 # native builds.
-#
 CC := @CC@
 
-#
-# Compilation flags for the C and C++ compilers.
-#
-CPPFLAGS+=@DEFS@
-CCFLAGS+=@DEFS@
+# Linker flags.
 LDFLAGS+=@LDFLAGS@
 
-#
-# Removed since it prevents the tests from working properly.
-#
-#LIBS+=@LIBS@
-
-#
 # Libraries needed by tools
-#
 TOOLLINKOPTS=@LIBS@
 
-#
-# Path to the archiver program.
-#
+# Path to the library archiver program.
 AR_PATH = @AR@
 
-#
 # The pathnames of the Flex and Bison programs, respectively.
-#
-BISON    = @YACC@
+YACC     = @YACC@
+BISON    = @BISON@
 FLEX     = @LEX@
 
-#
 # Paths to miscellaneous programs.
-#
-SED     = @SED@
-RM      = @RM@
-ECHO    = @ECHO@
-MKDIR   = @abs_top_srcdir@/mkinstalldirs
-DATE    = @DATE@
-MV      = @MV@
+RPWD    = pwd
+SED     = sed
+RM      = rm
+ECHO    = echo
+MKDIR   = @abs_top_srcdir@/autoconf/mkinstalldirs
+DATE    = date
+MV      = mv
 INSTALL = @INSTALL@
 DOT     = @DOT@
 ETAGS   = @ETAGS@
+ETAGSFLAGS = @ETAGSFLAGS@
 
-#
 # Determine the target for which LLVM should generate code.
-#
 LLVMGCCARCH := @target@/3.4-llvm
 
+# Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries:
+LCC1 = @LLVMCC1@
+LCC1XX = @LLVMCC1PLUS@
+
 # Path to directory where object files should be stored during a build.
 # Set OBJ_ROOT to "." if you do not want to use a separate place for
 # object files.
-# 
-#OBJ_ROOT = .
-OBJ_ROOT := @OBJROOT@
+OBJ_ROOT := .
 
-# Path to location for LLVM front-end this should only be specified here if you
-# want to override the value set in Makefile.$(uname)
-#
+# Path to location for LLVM C/C++ front-end. You can modify this if you
+# want to override the value set by configure.
 LLVMGCCDIR := @LLVMGCCDIR@
 
-# When this setting is set to true, programs in the llvm/test/Programs hierarchy
+# When this variable is set to 1, programs in the llvm/test/Programs hierarchy
 # are not recompiled from source code.  Instead, the bytecode for the file is
 # pulled from the BYTECODE_REPOSITORY directory.  This can be useful when disk
 # space is limited or when you just don't want to spend time running the C
 # frontend.
-#
 #USE_PRECOMPILED_BYTECODE := 1
 @UPB@
 
@@ -94,69 +81,124 @@ LLVMGCCDIR := @LLVMGCCDIR@
 # versions of the test/Programs/* programs.  This is used as the bytecode source
 # when USE_PRECOMPILED_BYTECODE is specified or when source code is not
 # available for the program (such as SPEC).
-#
 BYTECODE_REPOSITORY := @BCR@
 
-# Path to location for purify, this is only needed if you build with
-# ENABLE_PURIFY=1
-# 
-PURIFY = @PURIFY@
-
-#
 # SPEC benchmarks:
-#	Set the USE_SPEC variable to enable the use of the SPEC benchmarks.
+#	If these are set then run the SPEC benchmarks.
 #	You must provide the SPEC benchmarks on your own.
-#
-@USE_SPEC@
+@USE_SPEC2000@
+@USE_SPEC95@
 
-#
-# Path to the SPEC benchmarks.  If you have the SPEC benchmarks, place the
-# path here.
-#
-#SPEC_ROOT := /home/vadve/shared/benchmarks/speccpu2000/benchspec
-SPEC_ROOT := @SPEC_ROOT@
+# Path to the SPEC benchmarks.
+SPEC2000_ROOT := @SPEC2000_ROOT@
+SPEC95_ROOT := @SPEC95_ROOT@
+
+# Path to the Povray source code.
+@USE_POVRAY@
+POVRAY_ROOT := @POVRAY_ROOT@
 
-#
 # Path to the PAPI code.  This is used by the reoptimizer only.
-#
 #PAPIDIR := /home/vadve/shared/papi-2.3.4.1
 PAPIDIR := @PAPIDIR@
 
 # These are options that can either be enabled here, or can be enabled on the
-# make command line (ie, make ENABLE_PROFILING=1)
-#
+# make command line (ie, make ENABLE_PROFILING=1):
 
 # When ENABLE_OPTIMIZED is enabled, Release builds of all of the LLVM code are
 # turned on, and Debug builds are turned off.
-#
 #ENABLE_OPTIMIZED = 1
 @ENABLE_OPTIMIZED@
 
 # When ENABLE_PROFILING is enabled, the llvm source base is built with profile
 # information to allow gprof to be used to get execution frequencies.
-#
 #ENABLE_PROFILING = 1
-@ENABLE_PROFILING@
 
-#
-# This open tells the Makefiles to produce verbose output.
+# This option tells the Makefiles to produce verbose output.
 # It essentially prints the commands that make is executing
-#
 #VERBOSE = 1
 
-# When ENABLE_PURIFY is set to 1, the LLVM tools are linked with purify (which
-# must be locally installed) to allow for some automated memory error debugging.
-#
-#ENABLE_PURIFY = 1
-@ENABLE_PURIFY@
-
-#
 # Enable JIT for this platform
-#
 @JIT@
 
-#
 # Disable LLC diffs for testing.
-#
 @DISABLE_LLC_DIFFS@
 
+# Shared library extension for this platform.
+SHLIBEXT = @SHLIBEXT@
+
+###########################################################################
+# Directory Configuration
+#	This section of the Makefile determines what is where.  To be
+#	specific, there are several locations that need to be defined:
+#
+#	o LLVM_SRC_ROOT  : The root directory of the LLVM source code.
+#	o LLVM_OBJ_ROOT  : The root directory containing the built LLVM code.
+#
+#	o BUILD_SRC_DIR  : The directory containing the code to build.
+#	o BUILD_SRC_ROOT : The root directory of the code to build.
+#
+#	o BUILD_OBJ_DIR  : The directory in which compiled code will be placed.
+#	o BUILD_OBJ_ROOT : The root directory in which compiled code is placed.
+#
+###########################################################################
+
+# Set the object build directory.  By default, it is the current directory.
+ifndef BUILD_OBJ_DIR
+BUILD_OBJ_DIR := $(subst //,/,$(shell $(RPWD)))
+endif
+
+# Set the root of the object directory.
+ifndef BUILD_OBJ_ROOT
+BUILD_OBJ_ROOT := $(subst //,/,$(shell cd $(BUILD_OBJ_DIR)/$(LEVEL); $(RPWD)))
+endif
+
+# Set the source build directory.  That is almost always the current directory.
+ifndef BUILD_SRC_DIR
+BUILD_SRC_DIR := $(subst //,/,@abs_top_srcdir@/$(patsubst $(BUILD_OBJ_ROOT)%,%,$(BUILD_OBJ_DIR)))
+endif
+
+# Set the source root directory.
+ifndef BUILD_SRC_ROOT
+BUILD_SRC_ROOT := $(subst //,/,@abs_top_srcdir@)
+endif
+
+# Set the LLVM object directory.
+ifndef LLVM_OBJ_ROOT
+ifdef LLVM_SRC_ROOT
+LLVM_OBJ_ROOT := $(shell cd $(LLVM_SRC_ROOT); $(RPWD))
+else
+LLVM_OBJ_ROOT := $(BUILD_OBJ_ROOT)
+endif
+endif
+
+# Set the LLVM source directory.
+# It is typically the root directory of what we're compiling now.
+ifndef LLVM_SRC_ROOT
+LLVM_SRC_ROOT := $(BUILD_SRC_ROOT)
+endif
+
+# Set SourceDir for backwards compatbility.
+ifndef SourceDir
+SourceDir=$(BUILD_SRC_DIR)
+endif
+
+# Installation directories, as provided by the configure script.
+exec_prefix = @exec_prefix@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@ 
+localstatedir = @localstatedir@
+libdir = @libdir@
+bytecode_libdir = $(LLVMGCCDIR)/bytecode-libs
+includedir = @includedir@
+infodir = @infodir@
+mandir = @mandir@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_DATA = @INSTALL_DATA@
+