#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/firmware.h>
+#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
struct wm2000_priv {
struct i2c_client *i2c;
struct regmap *regmap;
+ struct clk *mclk;
struct regulator_bulk_data supplies[WM2000_NUM_SUPPLIES];
unsigned int anc_eng_ena:1;
unsigned int spk_ena:1;
- unsigned int mclk_div:1;
unsigned int speech_clarity:1;
int anc_download_size;
static int wm2000_power_up(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
+ unsigned long rate;
int ret;
BUG_ON(wm2000->anc_mode != ANC_OFF);
return ret;
}
- if (!wm2000->mclk_div) {
+ rate = clk_get_rate(wm2000->mclk);
+ if (rate <= 13500000) {
dev_dbg(&i2c->dev, "Disabling MCLK divider\n");
wm2000_write(i2c, WM2000_REG_SYS_CTL2,
WM2000_MCLK_DIV2_ENA_CLR);
return -EINVAL;
}
+ /* Maintain clock while active */
+ if (anc_transitions[i].source == ANC_OFF) {
+ ret = clk_prepare_enable(wm2000->mclk);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to enable MCLK: %d\n", ret);
+ return ret;
+ }
+ }
+
for (j = 0; j < ARRAY_SIZE(anc_transitions[j].step); j++) {
if (!anc_transitions[i].step[j])
break;
return ret;
}
- return 0;
+ if (anc_transitions[i].dest == ANC_OFF)
+ clk_disable_unprepare(wm2000->mclk);
+
+ return ret;
}
static int wm2000_anc_set_mode(struct wm2000_priv *wm2000)
}
static const struct snd_kcontrol_new wm2000_controls[] = {
+ SOC_SINGLE("ANC Volume", WM2000_REG_ANC_GAIN_CTRL, 0, 255, 0),
SOC_SINGLE_BOOL_EXT("WM2000 ANC Switch", 0,
wm2000_anc_mode_get,
wm2000_anc_mode_put),
{
switch (reg) {
case WM2000_REG_SYS_START:
+ case WM2000_REG_ANC_GAIN_CTRL:
+ case WM2000_REG_MSE_TH1:
+ case WM2000_REG_MSE_TH2:
case WM2000_REG_SPEECH_CLARITY:
case WM2000_REG_SYS_WATCHDOG:
case WM2000_REG_ANA_VMID_PD_TIME:
{
struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev);
+ snd_soc_codec_set_cache_io(codec, 16, 8, SND_SOC_REGMAP);
+
/* This will trigger a transition to standby mode by default */
wm2000_anc_set_mode(wm2000);
reg = wm2000_read(i2c, WM2000_REG_REVISON);
dev_info(&i2c->dev, "revision %c\n", reg + 'A');
+ wm2000->mclk = devm_clk_get(&i2c->dev, "MCLK");
+ if (IS_ERR(wm2000->mclk)) {
+ ret = PTR_ERR(wm2000->mclk);
+ dev_err(&i2c->dev, "Failed to get MCLK: %d\n", ret);
+ goto err_supplies;
+ }
+
filename = "wm2000_anc.bin";
pdata = dev_get_platdata(&i2c->dev);
if (pdata) {
- wm2000->mclk_div = pdata->mclkdiv2;
wm2000->speech_clarity = !pdata->speech_enh_disable;
if (pdata->download_file)