#include <linux/inetdevice.h>
#include <net/net_namespace.h>
#include <net/cfg80211.h>
+#include <net/addrconf.h>
#include "ieee80211_i.h"
#include "driver-ops.h"
#include "cfg.h"
#include "debugfs.h"
-static struct lock_class_key ieee80211_rx_skb_queue_class;
-
void ieee80211_configure_filter(struct ieee80211_local *local)
{
u64 mc;
static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata;
- struct ieee80211_channel *chan;
+ struct cfg80211_chan_def chandef = {};
u32 changed = 0;
int power;
- enum nl80211_channel_type channel_type;
u32 offchannel_flag;
- bool scanning = false;
offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
+
if (local->scan_channel) {
- chan = local->scan_channel;
+ chandef.chan = local->scan_channel;
/* If scanning on oper channel, use whatever channel-type
* is currently in use.
*/
- if (chan == local->_oper_channel)
- channel_type = local->_oper_channel_type;
- else
- channel_type = NL80211_CHAN_NO_HT;
+ if (chandef.chan == local->_oper_chandef.chan) {
+ chandef = local->_oper_chandef;
+ } else {
+ chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
+ chandef.center_freq1 = chandef.chan->center_freq;
+ }
} else if (local->tmp_channel) {
- chan = local->tmp_channel;
- channel_type = NL80211_CHAN_NO_HT;
- } else {
- chan = local->_oper_channel;
- channel_type = local->_oper_channel_type;
- }
-
- if (chan != local->_oper_channel ||
- channel_type != local->_oper_channel_type)
+ chandef.chan = local->tmp_channel;
+ chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
+ chandef.center_freq1 = chandef.chan->center_freq;
+ } else
+ chandef = local->_oper_chandef;
+
+ WARN(!cfg80211_chandef_valid(&chandef),
+ "control:%d MHz width:%d center: %d/%d MHz",
+ chandef.chan->center_freq, chandef.width,
+ chandef.center_freq1, chandef.center_freq2);
+
+ if (!cfg80211_chandef_identical(&chandef, &local->_oper_chandef))
local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
else
local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL;
offchannel_flag ^= local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
- if (offchannel_flag || chan != local->hw.conf.channel ||
- channel_type != local->hw.conf.channel_type) {
- local->hw.conf.channel = chan;
- local->hw.conf.channel_type = channel_type;
+ if (offchannel_flag ||
+ !cfg80211_chandef_identical(&local->hw.conf.chandef,
+ &local->_oper_chandef)) {
+ local->hw.conf.chandef = chandef;
changed |= IEEE80211_CONF_CHANGE_CHANNEL;
}
changed |= IEEE80211_CONF_CHANGE_SMPS;
}
- scanning = test_bit(SCAN_SW_SCANNING, &local->scanning) ||
- test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning) ||
- test_bit(SCAN_HW_SCANNING, &local->scanning);
- power = chan->max_power;
+ power = chandef.chan->max_power;
rcu_read_lock();
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
u32 changed)
{
struct ieee80211_local *local = sdata->local;
- static const u8 zero[ETH_ALEN] = { 0 };
if (!changed)
return;
- if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- sdata->vif.bss_conf.bssid = sdata->u.mgd.bssid;
- } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
- sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid;
- else if (sdata->vif.type == NL80211_IFTYPE_AP)
- sdata->vif.bss_conf.bssid = sdata->vif.addr;
- else if (sdata->vif.type == NL80211_IFTYPE_WDS)
- sdata->vif.bss_conf.bssid = NULL;
- else if (ieee80211_vif_is_mesh(&sdata->vif)) {
- sdata->vif.bss_conf.bssid = zero;
- } else if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) {
- sdata->vif.bss_conf.bssid = sdata->vif.addr;
- WARN_ONCE(changed & ~(BSS_CHANGED_IDLE),
- "P2P Device BSS changed %#x", changed);
- } else {
- WARN_ON(1);
- return;
- }
-
- switch (sdata->vif.type) {
- case NL80211_IFTYPE_AP:
- case NL80211_IFTYPE_ADHOC:
- case NL80211_IFTYPE_WDS:
- case NL80211_IFTYPE_MESH_POINT:
- break;
- default:
- /* do not warn to simplify caller in scan.c */
- changed &= ~BSS_CHANGED_BEACON_ENABLED;
- if (WARN_ON(changed & BSS_CHANGED_BEACON))
- return;
- break;
- }
-
- if (changed & BSS_CHANGED_BEACON_ENABLED) {
- if (local->quiescing || !ieee80211_sdata_running(sdata) ||
- test_bit(SDATA_STATE_OFFCHANNEL, &sdata->state)) {
- sdata->vif.bss_conf.enable_beacon = false;
- } else {
- /*
- * Beacon should be enabled, but AP mode must
- * check whether there is a beacon configured.
- */
- switch (sdata->vif.type) {
- case NL80211_IFTYPE_AP:
- sdata->vif.bss_conf.enable_beacon =
- !!sdata->u.ap.beacon;
- break;
- case NL80211_IFTYPE_ADHOC:
- sdata->vif.bss_conf.enable_beacon =
- !!sdata->u.ibss.presp;
- break;
-#ifdef CONFIG_MAC80211_MESH
- case NL80211_IFTYPE_MESH_POINT:
- sdata->vif.bss_conf.enable_beacon =
- !!sdata->u.mesh.mesh_id_len;
- break;
-#endif
- default:
- /* not reached */
- WARN_ON(1);
- break;
- }
- }
- }
-
drv_bss_info_changed(local, sdata, &sdata->vif.bss_conf, changed);
}
static void ieee80211_tasklet_handler(unsigned long data)
{
struct ieee80211_local *local = (struct ieee80211_local *) data;
- struct sta_info *sta, *tmp;
- struct skb_eosp_msg_data *eosp_data;
struct sk_buff *skb;
while ((skb = skb_dequeue(&local->skb_queue)) ||
skb->pkt_type = 0;
ieee80211_tx_status(&local->hw, skb);
break;
- case IEEE80211_EOSP_MSG:
- eosp_data = (void *)skb->cb;
- for_each_sta_info(local, eosp_data->sta, sta, tmp) {
- /* skip wrong virtual interface */
- if (memcmp(eosp_data->iface,
- sta->sdata->vif.addr, ETH_ALEN))
- continue;
- clear_sta_flag(sta, WLAN_STA_SP);
- break;
- }
- dev_kfree_skb(skb);
- break;
default:
WARN(1, "mac80211: Packet is of unknown type %d\n",
skb->pkt_type);
"Hardware restart was requested\n");
/* use this reason, ieee80211_reconfig will unblock it */
- ieee80211_stop_queues_by_reason(hw,
- IEEE80211_QUEUE_STOP_REASON_SUSPEND);
+ ieee80211_stop_queues_by_reason(hw, IEEE80211_MAX_QUEUE_MAP,
+ IEEE80211_QUEUE_STOP_REASON_SUSPEND);
/*
* Stop all Rx during the reconfig. We don't want state changes
/* Copy the addresses to the bss_conf list */
ifa = idev->ifa_list;
- while (c < IEEE80211_BSS_ARP_ADDR_LIST_LEN && ifa) {
- bss_conf->arp_addr_list[c] = ifa->ifa_address;
+ while (ifa) {
+ if (c < IEEE80211_BSS_ARP_ADDR_LIST_LEN)
+ bss_conf->arp_addr_list[c] = ifa->ifa_address;
ifa = ifa->ifa_next;
c++;
}
- /* If not all addresses fit the list, disable filtering */
- if (ifa) {
- sdata->arp_filter_state = false;
- c = 0;
- } else {
- sdata->arp_filter_state = true;
- }
bss_conf->arp_addr_cnt = c;
/* Configure driver only if associated (which also implies it is up) */
- if (ifmgd->associated) {
- bss_conf->arp_filter_enabled = sdata->arp_filter_state;
+ if (ifmgd->associated)
ieee80211_bss_info_change_notify(sdata,
BSS_CHANGED_ARP_FILTER);
- }
mutex_unlock(&ifmgd->mtx);
}
#endif
-static int ieee80211_napi_poll(struct napi_struct *napi, int budget)
+#if IS_ENABLED(CONFIG_IPV6)
+static int ieee80211_ifa6_changed(struct notifier_block *nb,
+ unsigned long data, void *arg)
{
+ struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)arg;
+ struct inet6_dev *idev = ifa->idev;
+ struct net_device *ndev = ifa->idev->dev;
struct ieee80211_local *local =
- container_of(napi, struct ieee80211_local, napi);
+ container_of(nb, struct ieee80211_local, ifa6_notifier);
+ struct wireless_dev *wdev = ndev->ieee80211_ptr;
+ struct ieee80211_sub_if_data *sdata;
- return local->ops->napi_poll(&local->hw, budget);
-}
+ /* Make sure it's our interface that got changed */
+ if (!wdev || wdev->wiphy != local->hw.wiphy)
+ return NOTIFY_DONE;
-void ieee80211_napi_schedule(struct ieee80211_hw *hw)
-{
- struct ieee80211_local *local = hw_to_local(hw);
+ sdata = IEEE80211_DEV_TO_SUB_IF(ndev);
- napi_schedule(&local->napi);
-}
-EXPORT_SYMBOL(ieee80211_napi_schedule);
+ /*
+ * For now only support station mode. This is mostly because
+ * doing AP would have to handle AP_VLAN in some way ...
+ */
+ if (sdata->vif.type != NL80211_IFTYPE_STATION)
+ return NOTIFY_DONE;
-void ieee80211_napi_complete(struct ieee80211_hw *hw)
-{
- struct ieee80211_local *local = hw_to_local(hw);
+ drv_ipv6_addr_change(local, sdata, idev);
- napi_complete(&local->napi);
+ return NOTIFY_DONE;
}
-EXPORT_SYMBOL(ieee80211_napi_complete);
+#endif
/* There isn't a lot of sense in it, but you can transmit anything you like */
static const struct ieee80211_txrx_stypes
.cap_info = cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
IEEE80211_HT_CAP_MAX_AMSDU |
+ IEEE80211_HT_CAP_SGI_20 |
IEEE80211_HT_CAP_SGI_40),
.mcs = {
.rx_mask = { 0xff, 0xff, 0xff, 0xff, 0xff,
},
};
+static const struct ieee80211_vht_cap mac80211_vht_capa_mod_mask = {
+ .vht_cap_info =
+ cpu_to_le32(IEEE80211_VHT_CAP_RXLDPC |
+ IEEE80211_VHT_CAP_SHORT_GI_80 |
+ IEEE80211_VHT_CAP_SHORT_GI_160 |
+ IEEE80211_VHT_CAP_RXSTBC_1 |
+ IEEE80211_VHT_CAP_RXSTBC_2 |
+ IEEE80211_VHT_CAP_RXSTBC_3 |
+ IEEE80211_VHT_CAP_RXSTBC_4 |
+ IEEE80211_VHT_CAP_TXSTBC |
+ IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
+ IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
+ IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN |
+ IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN |
+ IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK),
+ .supp_mcs = {
+ .rx_mcs_map = cpu_to_le16(~0),
+ .tx_mcs_map = cpu_to_le16(~0),
+ },
+};
+
+static const u8 extended_capabilities[] = {
+ 0, 0, 0, 0, 0, 0, 0,
+ WLAN_EXT_CAPA8_OPMODE_NOTIF,
+};
+
struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
const struct ieee80211_ops *ops)
{
WIPHY_FLAG_REPORTS_OBSS |
WIPHY_FLAG_OFFCHAN_TX;
+ wiphy->extended_capabilities = extended_capabilities;
+ wiphy->extended_capabilities_mask = extended_capabilities;
+ wiphy->extended_capabilities_len = ARRAY_SIZE(extended_capabilities);
+
if (ops->remain_on_channel)
wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
wiphy->features |= NL80211_FEATURE_SK_TX_STATUS |
NL80211_FEATURE_SAE |
NL80211_FEATURE_HT_IBSS |
- NL80211_FEATURE_VIF_TXPOWER;
+ NL80211_FEATURE_VIF_TXPOWER |
+ NL80211_FEATURE_USERSPACE_MPM;
if (!ops->hw_scan)
wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN |
IEEE80211_RADIOTAP_MCS_HAVE_BW;
local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI |
IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH;
+ local->hw.uapsd_queues = IEEE80211_DEFAULT_UAPSD_QUEUES;
+ local->hw.uapsd_max_sp_len = IEEE80211_DEFAULT_MAX_SP_LEN;
local->user_power_level = IEEE80211_UNSET_POWER_LEVEL;
wiphy->ht_capa_mod_mask = &mac80211_ht_capa_mod_mask;
+ wiphy->vht_capa_mod_mask = &mac80211_vht_capa_mod_mask;
INIT_LIST_HEAD(&local->interfaces);
mutex_init(&local->key_mtx);
spin_lock_init(&local->filter_lock);
+ spin_lock_init(&local->rx_path_lock);
spin_lock_init(&local->queue_stop_reason_lock);
INIT_LIST_HEAD(&local->chanctx_list);
mutex_init(&local->chanctx_mtx);
- /*
- * The rx_skb_queue is only accessed from tasklets,
- * but other SKB queues are used from within IRQ
- * context. Therefore, this one needs a different
- * locking class so our direct, non-irq-safe use of
- * the queue's lock doesn't throw lockdep warnings.
- */
- skb_queue_head_init_class(&local->rx_skb_queue,
- &ieee80211_rx_skb_queue_class);
-
INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
INIT_WORK(&local->restart_work, ieee80211_restart_work);
+ INIT_WORK(&local->radar_detected_work,
+ ieee80211_dfs_radar_detected_work);
+
INIT_WORK(&local->reconfig_filter, ieee80211_reconfig_filter);
local->smps_mode = IEEE80211_SMPS_OFF;
spin_lock_init(&local->ack_status_lock);
idr_init(&local->ack_status_frames);
- /* preallocate at least one entry */
- idr_pre_get(&local->ack_status_frames, GFP_KERNEL);
sta_info_init(local);
skb_queue_head_init(&local->skb_queue);
skb_queue_head_init(&local->skb_queue_unreliable);
- /* init dummy netdev for use w/ NAPI */
- init_dummy_netdev(&local->napi_dev);
-
ieee80211_led_names(local);
ieee80211_roc_setup(local);
int channels, max_bitrates;
bool supp_ht, supp_vht;
netdev_features_t feature_whitelist;
+ struct cfg80211_chan_def dflt_chandef = {};
static const u32 cipher_suites[] = {
/* keep WEP first, it may be removed below */
WLAN_CIPHER_SUITE_WEP40,
return -EINVAL;
#endif
- if ((hw->flags & IEEE80211_HW_SCAN_WHILE_IDLE) && !local->ops->hw_scan)
- return -EINVAL;
-
if (!local->use_chanctx) {
for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) {
const struct ieee80211_iface_combination *comb;
*/
if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_WDS))
return -EINVAL;
+
+ /* DFS currently not supported with channel context drivers */
+ for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) {
+ const struct ieee80211_iface_combination *comb;
+
+ comb = &local->hw.wiphy->iface_combinations[i];
+
+ if (comb->radar_detect_widths)
+ return -EINVAL;
+ }
}
/* Only HW csum features are currently compatible with mac80211 */
sband = local->hw.wiphy->bands[band];
if (!sband)
continue;
- if (!local->use_chanctx && !local->_oper_channel) {
+
+ if (!dflt_chandef.chan) {
+ cfg80211_chandef_create(&dflt_chandef,
+ &sband->channels[0],
+ NL80211_CHAN_NO_HT);
/* init channel we're on */
- local->hw.conf.channel =
- local->_oper_channel = &sband->channels[0];
- local->hw.conf.channel_type = NL80211_CHAN_NO_HT;
+ if (!local->use_chanctx && !local->_oper_chandef.chan) {
+ local->hw.conf.chandef = dflt_chandef;
+ local->_oper_chandef = dflt_chandef;
+ }
+ local->monitor_chandef = dflt_chandef;
}
- cfg80211_chandef_create(&local->monitor_chandef,
- &sband->channels[0],
- NL80211_CHAN_NO_HT);
+
channels += sband->n_channels;
if (max_bitrates < sband->n_bitrates)
if (supp_ht)
local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap);
- if (supp_vht) {
+ if (supp_vht)
local->scan_ies_len +=
2 + sizeof(struct ieee80211_vht_cap);
- /*
- * (for now at least), drivers wanting to use VHT must
- * support channel contexts, as they contain all the
- * necessary VHT information and the global hw config
- * doesn't (yet)
- */
- if (WARN_ON(!local->use_chanctx)) {
- result = -EINVAL;
- goto fail_wiphy_register;
- }
- }
-
if (!local->ops->hw_scan) {
/* For hw_scan, driver needs to set these up. */
local->hw.wiphy->max_scan_ssids = 4;
goto fail_ifa;
#endif
- netif_napi_add(&local->napi_dev, &local->napi, ieee80211_napi_poll,
- local->hw.napi_weight);
+#if IS_ENABLED(CONFIG_IPV6)
+ local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed;
+ result = register_inet6addr_notifier(&local->ifa6_notifier);
+ if (result)
+ goto fail_ifa6;
+#endif
return 0;
+#if IS_ENABLED(CONFIG_IPV6)
+ fail_ifa6:
#ifdef CONFIG_INET
+ unregister_inetaddr_notifier(&local->ifa_notifier);
+#endif
+#endif
+#if defined(CONFIG_INET) || defined(CONFIG_IPV6)
fail_ifa:
pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
&local->network_latency_notifier);
#ifdef CONFIG_INET
unregister_inetaddr_notifier(&local->ifa_notifier);
#endif
+#if IS_ENABLED(CONFIG_IPV6)
+ unregister_inet6addr_notifier(&local->ifa6_notifier);
+#endif
rtnl_lock();
wiphy_warn(local->hw.wiphy, "skb_queue not empty\n");
skb_queue_purge(&local->skb_queue);
skb_queue_purge(&local->skb_queue_unreliable);
- skb_queue_purge(&local->rx_skb_queue);
destroy_workqueue(local->workqueue);
wiphy_unregister(local->hw.wiphy);
rc80211_minstrel_ht_exit();
rc80211_minstrel_exit();
- if (mesh_allocated)
- ieee80211s_stop();
+ ieee80211s_stop();
ieee80211_iface_exit();
projects / firefly-linux-kernel-4.4.55.git / blobdiff