* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
* Copyright 2007, Michael Wu <flamingice@sourmilk.net>
- * Copyright 2007-2009, Intel Corporation
+ * Copyright 2007-2010, Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include "wme.h"
/**
- * DOC: TX aggregation
+ * DOC: TX A-MPDU aggregation
*
* Aggregation on the TX side requires setting the hardware flag
- * %IEEE80211_HW_AMPDU_AGGREGATION as well as, if present, the @ampdu_queues
- * hardware parameter to the number of hardware AMPDU queues. If there are no
- * hardware queues then the driver will (currently) have to do all frame
- * buffering.
+ * %IEEE80211_HW_AMPDU_AGGREGATION. The driver will then be handed
+ * packets with a flag indicating A-MPDU aggregation. The driver
+ * or device is responsible for actually aggregating the frames,
+ * as well as deciding how many and which to aggregate.
*
- * When TX aggregation is started by some subsystem (usually the rate control
- * algorithm would be appropriate) by calling the
- * ieee80211_start_tx_ba_session() function, the driver will be notified via
- * its @ampdu_action function, with the %IEEE80211_AMPDU_TX_START action.
+ * When TX aggregation is started by some subsystem (usually the rate
+ * control algorithm would be appropriate) by calling the
+ * ieee80211_start_tx_ba_session() function, the driver will be
+ * notified via its @ampdu_action function, with the
+ * %IEEE80211_AMPDU_TX_START action.
*
* In response to that, the driver is later required to call the
- * ieee80211_start_tx_ba_cb() (or ieee80211_start_tx_ba_cb_irqsafe())
- * function, which will start the aggregation session.
+ * ieee80211_start_tx_ba_cb_irqsafe() function, which will really
+ * start the aggregation session after the peer has also responded.
+ * If the peer responds negatively, the session will be stopped
+ * again right away. Note that it is possible for the aggregation
+ * session to be stopped before the driver has indicated that it
+ * is done setting it up, in which case it must not indicate the
+ * setup completion.
*
- * Similarly, when the aggregation session is stopped by
- * ieee80211_stop_tx_ba_session(), the driver's @ampdu_action function will
- * be called with the action %IEEE80211_AMPDU_TX_STOP. In this case, the
- * call must not fail, and the driver must later call ieee80211_stop_tx_ba_cb()
- * (or ieee80211_stop_tx_ba_cb_irqsafe()).
+ * Also note that, since we also need to wait for a response from
+ * the peer, the driver is notified of the completion of the
+ * handshake by the %IEEE80211_AMPDU_TX_OPERATIONAL action to the
+ * @ampdu_action callback.
+ *
+ * Similarly, when the aggregation session is stopped by the peer
+ * or something calling ieee80211_stop_tx_ba_session(), the driver's
+ * @ampdu_action function will be called with the action
+ * %IEEE80211_AMPDU_TX_STOP. In this case, the call must not fail,
+ * and the driver must later call ieee80211_stop_tx_ba_cb_irqsafe().
*/
static void ieee80211_send_addba_request(struct ieee80211_sub_if_data *sdata,
ieee80211_tx_skb(sdata, skb);
}
+static void kfree_tid_tx(struct rcu_head *rcu_head)
+{
+ struct tid_ampdu_tx *tid_tx =
+ container_of(rcu_head, struct tid_ampdu_tx, rcu_head);
+
+ kfree(tid_tx);
+}
+
int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
enum ieee80211_back_parties initiator)
{
struct ieee80211_local *local = sta->local;
+ struct tid_ampdu_tx *tid_tx = sta->ampdu_mlme.tid_tx[tid];
int ret;
- u8 *state;
+
+ lockdep_assert_held(&sta->ampdu_mlme.mtx);
+
+ if (!tid_tx)
+ return -ENOENT;
+
+ spin_lock_bh(&sta->lock);
+
+ if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) {
+ /* not even started yet! */
+ rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], NULL);
+ spin_unlock_bh(&sta->lock);
+ call_rcu(&tid_tx->rcu_head, kfree_tid_tx);
+ return 0;
+ }
+
+ spin_unlock_bh(&sta->lock);
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "Tx BA session stop requested for %pM tid %u\n",
sta->sta.addr, tid);
#endif /* CONFIG_MAC80211_HT_DEBUG */
- state = &sta->ampdu_mlme.tid_state_tx[tid];
+ set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state);
- if (*state == HT_AGG_STATE_OPERATIONAL)
- sta->ampdu_mlme.addba_req_num[tid] = 0;
+ /*
+ * After this packets are no longer handed right through
+ * to the driver but are put onto tid_tx->pending instead,
+ * with locking to ensure proper access.
+ */
+ clear_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state);
- *state = HT_AGG_STATE_REQ_STOP_BA_MSK |
- (initiator << HT_AGG_STATE_INITIATOR_SHIFT);
+ tid_tx->stop_initiator = initiator;
ret = drv_ampdu_action(local, sta->sdata,
IEEE80211_AMPDU_TX_STOP,
u16 tid = *(u8 *)data;
struct sta_info *sta = container_of((void *)data,
struct sta_info, timer_to_tid[tid]);
- u8 *state;
-
- state = &sta->ampdu_mlme.tid_state_tx[tid];
+ struct tid_ampdu_tx *tid_tx;
/* check if the TID waits for addBA response */
- spin_lock_bh(&sta->lock);
- if ((*state & (HT_ADDBA_REQUESTED_MSK | HT_ADDBA_RECEIVED_MSK |
- HT_AGG_STATE_REQ_STOP_BA_MSK)) !=
- HT_ADDBA_REQUESTED_MSK) {
- spin_unlock_bh(&sta->lock);
+ rcu_read_lock();
+ tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]);
+ if (!tid_tx ||
+ test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state)) {
+ rcu_read_unlock();
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "timer expired on tid %d but we are not "
"(or no longer) expecting addBA response there\n",
printk(KERN_DEBUG "addBA response timer expired on tid %d\n", tid);
#endif
- ___ieee80211_stop_tx_ba_session(sta, tid, WLAN_BACK_INITIATOR);
- spin_unlock_bh(&sta->lock);
+ ieee80211_stop_tx_ba_session(&sta->sta, tid);
+ rcu_read_unlock();
}
static inline int ieee80211_ac_from_tid(int tid)
return ieee802_1d_to_ac[tid & 7];
}
+/*
+ * When multiple aggregation sessions on multiple stations
+ * are being created/destroyed simultaneously, we need to
+ * refcount the global queue stop caused by that in order
+ * to not get into a situation where one of the aggregation
+ * setup or teardown re-enables queues before the other is
+ * ready to handle that.
+ *
+ * These two functions take care of this issue by keeping
+ * a global "agg_queue_stop" refcount.
+ */
+static void __acquires(agg_queue)
+ieee80211_stop_queue_agg(struct ieee80211_local *local, int tid)
+{
+ int queue = ieee80211_ac_from_tid(tid);
+
+ if (atomic_inc_return(&local->agg_queue_stop[queue]) == 1)
+ ieee80211_stop_queue_by_reason(
+ &local->hw, queue,
+ IEEE80211_QUEUE_STOP_REASON_AGGREGATION);
+ __acquire(agg_queue);
+}
+
+static void __releases(agg_queue)
+ieee80211_wake_queue_agg(struct ieee80211_local *local, int tid)
+{
+ int queue = ieee80211_ac_from_tid(tid);
+
+ if (atomic_dec_return(&local->agg_queue_stop[queue]) == 0)
+ ieee80211_wake_queue_by_reason(
+ &local->hw, queue,
+ IEEE80211_QUEUE_STOP_REASON_AGGREGATION);
+ __release(agg_queue);
+}
+
+void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
+{
+ struct tid_ampdu_tx *tid_tx = sta->ampdu_mlme.tid_tx[tid];
+ struct ieee80211_local *local = sta->local;
+ struct ieee80211_sub_if_data *sdata = sta->sdata;
+ u16 start_seq_num;
+ int ret;
+
+ lockdep_assert_held(&sta->ampdu_mlme.mtx);
+
+ /*
+ * While we're asking the driver about the aggregation,
+ * stop the AC queue so that we don't have to worry
+ * about frames that came in while we were doing that,
+ * which would require us to put them to the AC pending
+ * afterwards which just makes the code more complex.
+ */
+ ieee80211_stop_queue_agg(local, tid);
+
+ clear_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
+
+ /*
+ * make sure no packets are being processed to get
+ * valid starting sequence number
+ */
+ synchronize_net();
+
+ start_seq_num = sta->tid_seq[tid] >> 4;
+
+ ret = drv_ampdu_action(local, sdata, IEEE80211_AMPDU_TX_START,
+ &sta->sta, tid, &start_seq_num);
+ if (ret) {
+#ifdef CONFIG_MAC80211_HT_DEBUG
+ printk(KERN_DEBUG "BA request denied - HW unavailable for"
+ " tid %d\n", tid);
+#endif
+ spin_lock_bh(&sta->lock);
+ rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], NULL);
+ spin_unlock_bh(&sta->lock);
+
+ ieee80211_wake_queue_agg(local, tid);
+ call_rcu(&tid_tx->rcu_head, kfree_tid_tx);
+ return;
+ }
+
+ /* we can take packets again now */
+ ieee80211_wake_queue_agg(local, tid);
+
+ /* activate the timer for the recipient's addBA response */
+ mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL);
+#ifdef CONFIG_MAC80211_HT_DEBUG
+ printk(KERN_DEBUG "activated addBA response timer on tid %d\n", tid);
+#endif
+
+ spin_lock_bh(&sta->lock);
+ sta->ampdu_mlme.addba_req_num[tid]++;
+ spin_unlock_bh(&sta->lock);
+
+ /* send AddBA request */
+ ieee80211_send_addba_request(sdata, sta->sta.addr, tid,
+ tid_tx->dialog_token, start_seq_num,
+ 0x40, 5000);
+}
+
int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid)
{
struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
struct ieee80211_sub_if_data *sdata = sta->sdata;
struct ieee80211_local *local = sdata->local;
- u8 *state;
+ struct tid_ampdu_tx *tid_tx;
int ret = 0;
- u16 start_seq_num;
trace_api_start_tx_ba_session(pubsta, tid);
sdata->vif.type != NL80211_IFTYPE_AP)
return -EINVAL;
- if (test_sta_flags(sta, WLAN_STA_DISASSOC)) {
-#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "Disassociation is in progress. "
- "Denying BA session request\n");
-#endif
- return -EINVAL;
- }
-
if (test_sta_flags(sta, WLAN_STA_BLOCK_BA)) {
#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "Suspend in progress. "
+ printk(KERN_DEBUG "BA sessions blocked. "
"Denying BA session request\n");
#endif
return -EINVAL;
}
spin_lock_bh(&sta->lock);
- spin_lock(&local->ampdu_lock);
/* we have tried too many times, receiver does not want A-MPDU */
if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_MAX_RETRIES) {
goto err_unlock_sta;
}
- state = &sta->ampdu_mlme.tid_state_tx[tid];
+ tid_tx = sta->ampdu_mlme.tid_tx[tid];
/* check if the TID is not in aggregation flow already */
- if (*state != HT_AGG_STATE_IDLE) {
+ if (tid_tx) {
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "BA request denied - session is not "
"idle on tid %u\n", tid);
goto err_unlock_sta;
}
- /*
- * While we're asking the driver about the aggregation,
- * stop the AC queue so that we don't have to worry
- * about frames that came in while we were doing that,
- * which would require us to put them to the AC pending
- * afterwards which just makes the code more complex.
- */
- ieee80211_stop_queue_by_reason(
- &local->hw, ieee80211_ac_from_tid(tid),
- IEEE80211_QUEUE_STOP_REASON_AGGREGATION);
-
/* prepare A-MPDU MLME for Tx aggregation */
- sta->ampdu_mlme.tid_tx[tid] =
- kmalloc(sizeof(struct tid_ampdu_tx), GFP_ATOMIC);
- if (!sta->ampdu_mlme.tid_tx[tid]) {
+ tid_tx = kzalloc(sizeof(struct tid_ampdu_tx), GFP_ATOMIC);
+ if (!tid_tx) {
#ifdef CONFIG_MAC80211_HT_DEBUG
if (net_ratelimit())
printk(KERN_ERR "allocate tx mlme to tid %d failed\n",
tid);
#endif
ret = -ENOMEM;
- goto err_wake_queue;
+ goto err_unlock_sta;
}
- skb_queue_head_init(&sta->ampdu_mlme.tid_tx[tid]->pending);
+ skb_queue_head_init(&tid_tx->pending);
+ __set_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
/* Tx timer */
- sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.function =
- sta_addba_resp_timer_expired;
- sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.data =
- (unsigned long)&sta->timer_to_tid[tid];
- init_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
-
- /* Ok, the Addba frame hasn't been sent yet, but if the driver calls the
- * call back right away, it must see that the flow has begun */
- *state |= HT_ADDBA_REQUESTED_MSK;
+ tid_tx->addba_resp_timer.function = sta_addba_resp_timer_expired;
+ tid_tx->addba_resp_timer.data = (unsigned long)&sta->timer_to_tid[tid];
+ init_timer(&tid_tx->addba_resp_timer);
- start_seq_num = sta->tid_seq[tid] >> 4;
-
- ret = drv_ampdu_action(local, sdata, IEEE80211_AMPDU_TX_START,
- pubsta, tid, &start_seq_num);
-
- if (ret) {
-#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "BA request denied - HW unavailable for"
- " tid %d\n", tid);
-#endif /* CONFIG_MAC80211_HT_DEBUG */
- *state = HT_AGG_STATE_IDLE;
- goto err_free;
- }
+ /* assign a dialog token */
+ sta->ampdu_mlme.dialog_token_allocator++;
+ tid_tx->dialog_token = sta->ampdu_mlme.dialog_token_allocator;
- /* Driver vetoed or OKed, but we can take packets again now */
- ieee80211_wake_queue_by_reason(
- &local->hw, ieee80211_ac_from_tid(tid),
- IEEE80211_QUEUE_STOP_REASON_AGGREGATION);
+ /* finally, assign it to the array */
+ rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], tid_tx);
- spin_unlock(&local->ampdu_lock);
- spin_unlock_bh(&sta->lock);
+ ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work);
- /* send an addBA request */
- sta->ampdu_mlme.dialog_token_allocator++;
- sta->ampdu_mlme.tid_tx[tid]->dialog_token =
- sta->ampdu_mlme.dialog_token_allocator;
- sta->ampdu_mlme.tid_tx[tid]->ssn = start_seq_num;
-
- ieee80211_send_addba_request(sdata, pubsta->addr, tid,
- sta->ampdu_mlme.tid_tx[tid]->dialog_token,
- sta->ampdu_mlme.tid_tx[tid]->ssn,
- 0x40, 5000);
- sta->ampdu_mlme.addba_req_num[tid]++;
- /* activate the timer for the recipient's addBA response */
- sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.expires =
- jiffies + ADDBA_RESP_INTERVAL;
- add_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
-#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "activated addBA response timer on tid %d\n", tid);
-#endif
- return 0;
-
- err_free:
- kfree(sta->ampdu_mlme.tid_tx[tid]);
- sta->ampdu_mlme.tid_tx[tid] = NULL;
- err_wake_queue:
- ieee80211_wake_queue_by_reason(
- &local->hw, ieee80211_ac_from_tid(tid),
- IEEE80211_QUEUE_STOP_REASON_AGGREGATION);
+ /* this flow continues off the work */
err_unlock_sta:
- spin_unlock(&local->ampdu_lock);
spin_unlock_bh(&sta->lock);
return ret;
}
/*
* splice packets from the STA's pending to the local pending,
- * requires a call to ieee80211_agg_splice_finish and holding
- * local->ampdu_lock across both calls.
+ * requires a call to ieee80211_agg_splice_finish later
*/
-static void ieee80211_agg_splice_packets(struct ieee80211_local *local,
- struct sta_info *sta, u16 tid)
+static void __acquires(agg_queue)
+ieee80211_agg_splice_packets(struct ieee80211_local *local,
+ struct tid_ampdu_tx *tid_tx, u16 tid)
{
+ int queue = ieee80211_ac_from_tid(tid);
unsigned long flags;
- u16 queue = ieee80211_ac_from_tid(tid);
-
- ieee80211_stop_queue_by_reason(
- &local->hw, queue,
- IEEE80211_QUEUE_STOP_REASON_AGGREGATION);
- if (!(sta->ampdu_mlme.tid_state_tx[tid] & HT_ADDBA_REQUESTED_MSK))
- return;
+ ieee80211_stop_queue_agg(local, tid);
- if (WARN(!sta->ampdu_mlme.tid_tx[tid],
- "TID %d gone but expected when splicing aggregates from"
- "the pending queue\n", tid))
+ if (WARN(!tid_tx, "TID %d gone but expected when splicing aggregates"
+ " from the pending queue\n", tid))
return;
- if (!skb_queue_empty(&sta->ampdu_mlme.tid_tx[tid]->pending)) {
+ if (!skb_queue_empty(&tid_tx->pending)) {
spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
/* copy over remaining packets */
- skb_queue_splice_tail_init(
- &sta->ampdu_mlme.tid_tx[tid]->pending,
- &local->pending[queue]);
+ skb_queue_splice_tail_init(&tid_tx->pending,
+ &local->pending[queue]);
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
}
}
-static void ieee80211_agg_splice_finish(struct ieee80211_local *local,
- struct sta_info *sta, u16 tid)
+static void __releases(agg_queue)
+ieee80211_agg_splice_finish(struct ieee80211_local *local, u16 tid)
{
- u16 queue = ieee80211_ac_from_tid(tid);
-
- ieee80211_wake_queue_by_reason(
- &local->hw, queue,
- IEEE80211_QUEUE_STOP_REASON_AGGREGATION);
+ ieee80211_wake_queue_agg(local, tid);
}
-/* caller must hold sta->lock */
static void ieee80211_agg_tx_operational(struct ieee80211_local *local,
struct sta_info *sta, u16 tid)
{
+ lockdep_assert_held(&sta->ampdu_mlme.mtx);
+
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "Aggregation is on for tid %d\n", tid);
#endif
- spin_lock(&local->ampdu_lock);
- ieee80211_agg_splice_packets(local, sta, tid);
- /*
- * NB: we rely on sta->lock being taken in the TX
- * processing here when adding to the pending queue,
- * otherwise we could only change the state of the
- * session to OPERATIONAL _here_.
- */
- ieee80211_agg_splice_finish(local, sta, tid);
- spin_unlock(&local->ampdu_lock);
-
drv_ampdu_action(local, sta->sdata,
IEEE80211_AMPDU_TX_OPERATIONAL,
&sta->sta, tid, NULL);
+
+ /*
+ * synchronize with TX path, while splicing the TX path
+ * should block so it won't put more packets onto pending.
+ */
+ spin_lock_bh(&sta->lock);
+
+ ieee80211_agg_splice_packets(local, sta->ampdu_mlme.tid_tx[tid], tid);
+ /*
+ * Now mark as operational. This will be visible
+ * in the TX path, and lets it go lock-free in
+ * the common case.
+ */
+ set_bit(HT_AGG_STATE_OPERATIONAL, &sta->ampdu_mlme.tid_tx[tid]->state);
+ ieee80211_agg_splice_finish(local, tid);
+
+ spin_unlock_bh(&sta->lock);
}
void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid)
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
- u8 *state;
+ struct tid_ampdu_tx *tid_tx;
trace_api_start_tx_ba_cb(sdata, ra, tid);
return;
}
- rcu_read_lock();
+ mutex_lock(&local->sta_mtx);
sta = sta_info_get(sdata, ra);
if (!sta) {
- rcu_read_unlock();
+ mutex_unlock(&local->sta_mtx);
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "Could not find station: %pM\n", ra);
#endif
return;
}
- state = &sta->ampdu_mlme.tid_state_tx[tid];
- spin_lock_bh(&sta->lock);
+ mutex_lock(&sta->ampdu_mlme.mtx);
+ tid_tx = sta->ampdu_mlme.tid_tx[tid];
- if (WARN_ON(!(*state & HT_ADDBA_REQUESTED_MSK))) {
+ if (WARN_ON(!tid_tx)) {
#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "addBA was not requested yet, state is %d\n",
- *state);
+ printk(KERN_DEBUG "addBA was not requested!\n");
#endif
- spin_unlock_bh(&sta->lock);
- rcu_read_unlock();
- return;
+ goto unlock;
}
- if (WARN_ON(*state & HT_ADDBA_DRV_READY_MSK))
- goto out;
-
- *state |= HT_ADDBA_DRV_READY_MSK;
+ if (WARN_ON(test_and_set_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state)))
+ goto unlock;
- if (*state == HT_AGG_STATE_OPERATIONAL)
+ if (test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state))
ieee80211_agg_tx_operational(local, sta, tid);
- out:
- spin_unlock_bh(&sta->lock);
- rcu_read_unlock();
+ unlock:
+ mutex_unlock(&sta->ampdu_mlme.mtx);
+ mutex_unlock(&local->sta_mtx);
}
-EXPORT_SYMBOL(ieee80211_start_tx_ba_cb);
void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif,
const u8 *ra, u16 tid)
ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
memcpy(&ra_tid->ra, ra, ETH_ALEN);
ra_tid->tid = tid;
- ra_tid->vif = vif;
- skb->pkt_type = IEEE80211_ADDBA_MSG;
- skb_queue_tail(&local->skb_queue, skb);
- tasklet_schedule(&local->tasklet);
+ skb->pkt_type = IEEE80211_SDATA_QUEUE_AGG_START;
+ skb_queue_tail(&sdata->skb_queue, skb);
+ ieee80211_queue_work(&local->hw, &sdata->work);
}
EXPORT_SYMBOL(ieee80211_start_tx_ba_cb_irqsafe);
int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
enum ieee80211_back_parties initiator)
{
- u8 *state;
int ret;
- /* check if the TID is in aggregation */
- state = &sta->ampdu_mlme.tid_state_tx[tid];
- spin_lock_bh(&sta->lock);
-
- if (*state != HT_AGG_STATE_OPERATIONAL) {
- ret = -ENOENT;
- goto unlock;
- }
+ mutex_lock(&sta->ampdu_mlme.mtx);
ret = ___ieee80211_stop_tx_ba_session(sta, tid, initiator);
- unlock:
- spin_unlock_bh(&sta->lock);
+ mutex_unlock(&sta->ampdu_mlme.mtx);
+
return ret;
}
-int ieee80211_stop_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
- enum ieee80211_back_parties initiator)
+int ieee80211_stop_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid)
{
struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
struct ieee80211_sub_if_data *sdata = sta->sdata;
struct ieee80211_local *local = sdata->local;
+ struct tid_ampdu_tx *tid_tx;
+ int ret = 0;
- trace_api_stop_tx_ba_session(pubsta, tid, initiator);
+ trace_api_stop_tx_ba_session(pubsta, tid);
if (!local->ops->ampdu_action)
return -EINVAL;
if (tid >= STA_TID_NUM)
return -EINVAL;
- return __ieee80211_stop_tx_ba_session(sta, tid, initiator);
+ spin_lock_bh(&sta->lock);
+ tid_tx = sta->ampdu_mlme.tid_tx[tid];
+
+ if (!tid_tx) {
+ ret = -ENOENT;
+ goto unlock;
+ }
+
+ if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
+ /* already in progress stopping it */
+ ret = 0;
+ goto unlock;
+ }
+
+ set_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state);
+ ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work);
+
+ unlock:
+ spin_unlock_bh(&sta->lock);
+ return ret;
}
EXPORT_SYMBOL(ieee80211_stop_tx_ba_session);
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
- u8 *state;
+ struct tid_ampdu_tx *tid_tx;
trace_api_stop_tx_ba_cb(sdata, ra, tid);
ra, tid);
#endif /* CONFIG_MAC80211_HT_DEBUG */
- rcu_read_lock();
+ mutex_lock(&local->sta_mtx);
+
sta = sta_info_get(sdata, ra);
if (!sta) {
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "Could not find station: %pM\n", ra);
#endif
- rcu_read_unlock();
- return;
+ goto unlock;
}
- state = &sta->ampdu_mlme.tid_state_tx[tid];
- /* NOTE: no need to use sta->lock in this state check, as
- * ieee80211_stop_tx_ba_session will let only one stop call to
- * pass through per sta/tid
- */
- if ((*state & HT_AGG_STATE_REQ_STOP_BA_MSK) == 0) {
+ mutex_lock(&sta->ampdu_mlme.mtx);
+ spin_lock_bh(&sta->lock);
+ tid_tx = sta->ampdu_mlme.tid_tx[tid];
+
+ if (!tid_tx || !test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "unexpected callback to A-MPDU stop\n");
#endif
- rcu_read_unlock();
- return;
+ goto unlock_sta;
}
- if (*state & HT_AGG_STATE_INITIATOR_MSK)
+ if (tid_tx->stop_initiator == WLAN_BACK_INITIATOR)
ieee80211_send_delba(sta->sdata, ra, tid,
WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE);
- spin_lock_bh(&sta->lock);
- spin_lock(&local->ampdu_lock);
+ /*
+ * When we get here, the TX path will not be lockless any more wrt.
+ * aggregation, since the OPERATIONAL bit has long been cleared.
+ * Thus it will block on getting the lock, if it occurs. So if we
+ * stop the queue now, we will not get any more packets, and any
+ * that might be being processed will wait for us here, thereby
+ * guaranteeing that no packets go to the tid_tx pending queue any
+ * more.
+ */
- ieee80211_agg_splice_packets(local, sta, tid);
+ ieee80211_agg_splice_packets(local, tid_tx, tid);
- *state = HT_AGG_STATE_IDLE;
- /* from now on packets are no longer put onto sta->pending */
- kfree(sta->ampdu_mlme.tid_tx[tid]);
- sta->ampdu_mlme.tid_tx[tid] = NULL;
+ /* future packets must not find the tid_tx struct any more */
+ rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], NULL);
- ieee80211_agg_splice_finish(local, sta, tid);
+ ieee80211_agg_splice_finish(local, tid);
- spin_unlock(&local->ampdu_lock);
- spin_unlock_bh(&sta->lock);
+ call_rcu(&tid_tx->rcu_head, kfree_tid_tx);
- rcu_read_unlock();
+ unlock_sta:
+ spin_unlock_bh(&sta->lock);
+ mutex_unlock(&sta->ampdu_mlme.mtx);
+ unlock:
+ mutex_unlock(&local->sta_mtx);
}
-EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb);
void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif,
const u8 *ra, u16 tid)
ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
memcpy(&ra_tid->ra, ra, ETH_ALEN);
ra_tid->tid = tid;
- ra_tid->vif = vif;
- skb->pkt_type = IEEE80211_DELBA_MSG;
- skb_queue_tail(&local->skb_queue, skb);
- tasklet_schedule(&local->tasklet);
+ skb->pkt_type = IEEE80211_SDATA_QUEUE_AGG_STOP;
+ skb_queue_tail(&sdata->skb_queue, skb);
+ ieee80211_queue_work(&local->hw, &sdata->work);
}
EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb_irqsafe);
struct ieee80211_mgmt *mgmt,
size_t len)
{
+ struct tid_ampdu_tx *tid_tx;
u16 capab, tid;
- u8 *state;
capab = le16_to_cpu(mgmt->u.action.u.addba_resp.capab);
tid = (capab & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2;
- state = &sta->ampdu_mlme.tid_state_tx[tid];
-
- spin_lock_bh(&sta->lock);
+ mutex_lock(&sta->ampdu_mlme.mtx);
- if (!(*state & HT_ADDBA_REQUESTED_MSK))
+ tid_tx = sta->ampdu_mlme.tid_tx[tid];
+ if (!tid_tx)
goto out;
- if (mgmt->u.action.u.addba_resp.dialog_token !=
- sta->ampdu_mlme.tid_tx[tid]->dialog_token) {
+ if (mgmt->u.action.u.addba_resp.dialog_token != tid_tx->dialog_token) {
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "wrong addBA response token, tid %d\n", tid);
-#endif /* CONFIG_MAC80211_HT_DEBUG */
+#endif
goto out;
}
- del_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
+ del_timer(&tid_tx->addba_resp_timer);
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "switched off addBA timer for tid %d\n", tid);
-#endif /* CONFIG_MAC80211_HT_DEBUG */
+#endif
if (le16_to_cpu(mgmt->u.action.u.addba_resp.status)
== WLAN_STATUS_SUCCESS) {
- u8 curstate = *state;
-
- *state |= HT_ADDBA_RECEIVED_MSK;
+ if (test_and_set_bit(HT_AGG_STATE_RESPONSE_RECEIVED,
+ &tid_tx->state)) {
+ /* ignore duplicate response */
+ goto out;
+ }
- if (*state != curstate && *state == HT_AGG_STATE_OPERATIONAL)
+ if (test_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state))
ieee80211_agg_tx_operational(local, sta, tid);
sta->ampdu_mlme.addba_req_num[tid] = 0;
}
out:
- spin_unlock_bh(&sta->lock);
+ mutex_unlock(&sta->ampdu_mlme.mtx);
}
projects / firefly-linux-kernel-4.4.55.git / blobdiff