#include "llvm/BasicBlock.h"
#include "llvm/Constants.h"
#include "llvm/Instructions.h"
+#include "llvm/IntrinsicInst.h"
#include "llvm/LLVMContext.h"
#include "llvm/Type.h"
#include "llvm/Analysis/Dominators.h"
public:
static char ID; // Pass identification, replacement for typeid
- IndVarSimplify() : LoopPass(&ID) {}
+ IndVarSimplify() : LoopPass(ID) {
+ initializeIndVarSimplifyPass(*PassRegistry::getPassRegistry());
+ }
virtual bool runOnLoop(Loop *L, LPPassManager &LPM);
private:
+ void EliminateIVComparisons();
+ void EliminateIVRemainders();
void RewriteNonIntegerIVs(Loop *L);
ICmpInst *LinearFunctionTestReplace(Loop *L, const SCEV *BackedgeTakenCount,
- Value *IndVar,
+ PHINode *IndVar,
BasicBlock *ExitingBlock,
BranchInst *BI,
SCEVExpander &Rewriter);
- void RewriteLoopExitValues(Loop *L, const SCEV *BackedgeTakenCount,
- SCEVExpander &Rewriter);
+ void RewriteLoopExitValues(Loop *L, SCEVExpander &Rewriter);
- void RewriteIVExpressions(Loop *L, const Type *LargestType,
- SCEVExpander &Rewriter);
+ void RewriteIVExpressions(Loop *L, SCEVExpander &Rewriter);
void SinkUnusedInvariants(Loop *L);
}
char IndVarSimplify::ID = 0;
-static RegisterPass<IndVarSimplify>
-X("indvars", "Canonicalize Induction Variables");
+INITIALIZE_PASS_BEGIN(IndVarSimplify, "indvars",
+ "Canonicalize Induction Variables", false, false)
+INITIALIZE_PASS_DEPENDENCY(DominatorTree)
+INITIALIZE_PASS_DEPENDENCY(LoopInfo)
+INITIALIZE_PASS_DEPENDENCY(ScalarEvolution)
+INITIALIZE_PASS_DEPENDENCY(LoopSimplify)
+INITIALIZE_PASS_DEPENDENCY(LCSSA)
+INITIALIZE_PASS_DEPENDENCY(IVUsers)
+INITIALIZE_PASS_END(IndVarSimplify, "indvars",
+ "Canonicalize Induction Variables", false, false)
Pass *llvm::createIndVarSimplifyPass() {
return new IndVarSimplify();
/// is actually a much broader range than just linear tests.
ICmpInst *IndVarSimplify::LinearFunctionTestReplace(Loop *L,
const SCEV *BackedgeTakenCount,
- Value *IndVar,
+ PHINode *IndVar,
BasicBlock *ExitingBlock,
BranchInst *BI,
SCEVExpander &Rewriter) {
+ // Special case: If the backedge-taken count is a UDiv, it's very likely a
+ // UDiv that ScalarEvolution produced in order to compute a precise
+ // expression, rather than a UDiv from the user's code. If we can't find a
+ // UDiv in the code with some simple searching, assume the former and forego
+ // rewriting the loop.
+ if (isa<SCEVUDivExpr>(BackedgeTakenCount)) {
+ ICmpInst *OrigCond = dyn_cast<ICmpInst>(BI->getCondition());
+ if (!OrigCond) return 0;
+ const SCEV *R = SE->getSCEV(OrigCond->getOperand(1));
+ R = SE->getMinusSCEV(R, SE->getConstant(R->getType(), 1));
+ if (R != BackedgeTakenCount) {
+ const SCEV *L = SE->getSCEV(OrigCond->getOperand(0));
+ L = SE->getMinusSCEV(L, SE->getConstant(L->getType(), 1));
+ if (L != BackedgeTakenCount)
+ return 0;
+ }
+ }
+
// If the exiting block is not the same as the backedge block, we must compare
// against the preincremented value, otherwise we prefer to compare against
// the post-incremented value.
// Add one to the "backedge-taken" count to get the trip count.
// If this addition may overflow, we have to be more pessimistic and
// cast the induction variable before doing the add.
- const SCEV *Zero = SE->getIntegerSCEV(0, BackedgeTakenCount->getType());
+ const SCEV *Zero = SE->getConstant(BackedgeTakenCount->getType(), 0);
const SCEV *N =
SE->getAddExpr(BackedgeTakenCount,
- SE->getIntegerSCEV(1, BackedgeTakenCount->getType()));
+ SE->getConstant(BackedgeTakenCount->getType(), 1));
if ((isa<SCEVConstant>(N) && !N->isZero()) ||
- SE->isLoopGuardedByCond(L, ICmpInst::ICMP_NE, N, Zero)) {
+ SE->isLoopEntryGuardedByCond(L, ICmpInst::ICMP_NE, N, Zero)) {
// No overflow. Cast the sum.
RHS = SE->getTruncateOrZeroExtend(N, IndVar->getType());
} else {
RHS = SE->getTruncateOrZeroExtend(BackedgeTakenCount,
IndVar->getType());
RHS = SE->getAddExpr(RHS,
- SE->getIntegerSCEV(1, IndVar->getType()));
+ SE->getConstant(IndVar->getType(), 1));
}
// The BackedgeTaken expression contains the number of times that the
// backedge branches to the loop header. This is one less than the
// number of times the loop executes, so use the incremented indvar.
- CmpIndVar = L->getCanonicalInductionVariableIncrement();
+ CmpIndVar = IndVar->getIncomingValueForBlock(ExitingBlock);
} else {
// We have to use the preincremented value...
RHS = SE->getTruncateOrZeroExtend(BackedgeTakenCount,
}
// Expand the code for the iteration count.
- assert(RHS->isLoopInvariant(L) &&
+ assert(SE->isLoopInvariant(RHS, L) &&
"Computed iteration count is not loop invariant!");
Value *ExitCnt = Rewriter.expandCodeFor(RHS, IndVar->getType(), BI);
ICmpInst *Cond = new ICmpInst(BI, Opcode, CmpIndVar, ExitCnt, "exitcond");
- Instruction *OrigCond = cast<Instruction>(BI->getCondition());
+ Value *OrigCond = BI->getCondition();
// It's tempting to use replaceAllUsesWith here to fully replace the old
// comparison, but that's not immediately safe, since users of the old
// comparison may not be dominated by the new comparison. Instead, just
/// happen later, except that it's more powerful in some cases, because it's
/// able to brute-force evaluate arbitrary instructions as long as they have
/// constant operands at the beginning of the loop.
-void IndVarSimplify::RewriteLoopExitValues(Loop *L,
- const SCEV *BackedgeTakenCount,
- SCEVExpander &Rewriter) {
+void IndVarSimplify::RewriteLoopExitValues(Loop *L, SCEVExpander &Rewriter) {
// Verify the input to the pass in already in LCSSA form.
- assert(L->isLCSSAForm());
+ assert(L->isLCSSAForm(*DT));
SmallVector<BasicBlock*, 8> ExitBlocks;
L->getUniqueExitBlocks(ExitBlocks);
while ((PN = dyn_cast<PHINode>(BBI++))) {
if (PN->use_empty())
continue; // dead use, don't replace it
+
+ // SCEV only supports integer expressions for now.
+ if (!PN->getType()->isIntegerTy() && !PN->getType()->isPointerTy())
+ continue;
+
+ // It's necessary to tell ScalarEvolution about this explicitly so that
+ // it can walk the def-use list and forget all SCEVs, as it may not be
+ // watching the PHI itself. Once the new exit value is in place, there
+ // may not be a def-use connection between the loop and every instruction
+ // which got a SCEVAddRecExpr for that loop.
+ SE->forgetValue(PN);
+
// Iterate over all of the values in all the PHI nodes.
for (unsigned i = 0; i != NumPreds; ++i) {
// If the value being merged in is not integer or is not defined
// in the loop, skip it.
Value *InVal = PN->getIncomingValue(i);
- if (!isa<Instruction>(InVal) ||
- // SCEV only supports integer expressions for now.
- (!isa<IntegerType>(InVal->getType()) &&
- !isa<PointerType>(InVal->getType())))
+ if (!isa<Instruction>(InVal))
continue;
// If this pred is for a subloop, not L itself, skip it.
// and varies predictably *inside* the loop. Evaluate the value it
// contains when the loop exits, if possible.
const SCEV *ExitValue = SE->getSCEVAtScope(Inst, L->getParentLoop());
- if (!ExitValue->isLoopInvariant(L))
+ if (!SE->isLoopInvariant(ExitValue, L))
continue;
Changed = true;
}
}
}
+
+ // The insertion point instruction may have been deleted; clear it out
+ // so that the rewriter doesn't trip over it later.
+ Rewriter.clearInsertPoint();
}
void IndVarSimplify::RewriteNonIntegerIVs(Loop *L) {
// If there are, change them into integer recurrences, permitting analysis by
// the SCEV routines.
//
- BasicBlock *Header = L->getHeader();
+ BasicBlock *Header = L->getHeader();
SmallVector<WeakVH, 8> PHIs;
for (BasicBlock::iterator I = Header->begin();
PHIs.push_back(PN);
for (unsigned i = 0, e = PHIs.size(); i != e; ++i)
- if (PHINode *PN = dyn_cast_or_null<PHINode>(PHIs[i]))
+ if (PHINode *PN = dyn_cast_or_null<PHINode>(&*PHIs[i]))
HandleFloatingPointIV(L, PN);
// If the loop previously had floating-point IV, ScalarEvolution
SE->forgetLoop(L);
}
+void IndVarSimplify::EliminateIVComparisons() {
+ SmallVector<WeakVH, 16> DeadInsts;
+
+ // Look for ICmp users.
+ for (IVUsers::iterator I = IU->begin(), E = IU->end(); I != E; ++I) {
+ IVStrideUse &UI = *I;
+ ICmpInst *ICmp = dyn_cast<ICmpInst>(UI.getUser());
+ if (!ICmp) continue;
+
+ bool Swapped = UI.getOperandValToReplace() == ICmp->getOperand(1);
+ ICmpInst::Predicate Pred = ICmp->getPredicate();
+ if (Swapped) Pred = ICmpInst::getSwappedPredicate(Pred);
+
+ // Get the SCEVs for the ICmp operands.
+ const SCEV *S = IU->getReplacementExpr(UI);
+ const SCEV *X = SE->getSCEV(ICmp->getOperand(!Swapped));
+
+ // Simplify unnecessary loops away.
+ const Loop *ICmpLoop = LI->getLoopFor(ICmp->getParent());
+ S = SE->getSCEVAtScope(S, ICmpLoop);
+ X = SE->getSCEVAtScope(X, ICmpLoop);
+
+ // If the condition is always true or always false, replace it with
+ // a constant value.
+ if (SE->isKnownPredicate(Pred, S, X))
+ ICmp->replaceAllUsesWith(ConstantInt::getTrue(ICmp->getContext()));
+ else if (SE->isKnownPredicate(ICmpInst::getInversePredicate(Pred), S, X))
+ ICmp->replaceAllUsesWith(ConstantInt::getFalse(ICmp->getContext()));
+ else
+ continue;
+
+ DEBUG(dbgs() << "INDVARS: Eliminated comparison: " << *ICmp << '\n');
+ DeadInsts.push_back(ICmp);
+ }
+
+ // Now that we're done iterating through lists, clean up any instructions
+ // which are now dead.
+ while (!DeadInsts.empty())
+ if (Instruction *Inst =
+ dyn_cast_or_null<Instruction>(&*DeadInsts.pop_back_val()))
+ RecursivelyDeleteTriviallyDeadInstructions(Inst);
+}
+
+void IndVarSimplify::EliminateIVRemainders() {
+ SmallVector<WeakVH, 16> DeadInsts;
+
+ // Look for SRem and URem users.
+ for (IVUsers::iterator I = IU->begin(), E = IU->end(); I != E; ++I) {
+ IVStrideUse &UI = *I;
+ BinaryOperator *Rem = dyn_cast<BinaryOperator>(UI.getUser());
+ if (!Rem) continue;
+
+ bool isSigned = Rem->getOpcode() == Instruction::SRem;
+ if (!isSigned && Rem->getOpcode() != Instruction::URem)
+ continue;
+
+ // We're only interested in the case where we know something about
+ // the numerator.
+ if (UI.getOperandValToReplace() != Rem->getOperand(0))
+ continue;
+
+ // Get the SCEVs for the ICmp operands.
+ const SCEV *S = SE->getSCEV(Rem->getOperand(0));
+ const SCEV *X = SE->getSCEV(Rem->getOperand(1));
+
+ // Simplify unnecessary loops away.
+ const Loop *ICmpLoop = LI->getLoopFor(Rem->getParent());
+ S = SE->getSCEVAtScope(S, ICmpLoop);
+ X = SE->getSCEVAtScope(X, ICmpLoop);
+
+ // i % n --> i if i is in [0,n).
+ if ((!isSigned || SE->isKnownNonNegative(S)) &&
+ SE->isKnownPredicate(isSigned ? ICmpInst::ICMP_SLT : ICmpInst::ICMP_ULT,
+ S, X))
+ Rem->replaceAllUsesWith(Rem->getOperand(0));
+ else {
+ // (i+1) % n --> (i+1)==n?0:(i+1) if i is in [0,n).
+ const SCEV *LessOne =
+ SE->getMinusSCEV(S, SE->getConstant(S->getType(), 1));
+ if ((!isSigned || SE->isKnownNonNegative(LessOne)) &&
+ SE->isKnownPredicate(isSigned ? ICmpInst::ICMP_SLT : ICmpInst::ICMP_ULT,
+ LessOne, X)) {
+ ICmpInst *ICmp = new ICmpInst(Rem, ICmpInst::ICMP_EQ,
+ Rem->getOperand(0), Rem->getOperand(1),
+ "tmp");
+ SelectInst *Sel =
+ SelectInst::Create(ICmp,
+ ConstantInt::get(Rem->getType(), 0),
+ Rem->getOperand(0), "tmp", Rem);
+ Rem->replaceAllUsesWith(Sel);
+ } else
+ continue;
+ }
+
+ // Inform IVUsers about the new users.
+ if (Instruction *I = dyn_cast<Instruction>(Rem->getOperand(0)))
+ IU->AddUsersIfInteresting(I);
+
+ DEBUG(dbgs() << "INDVARS: Simplified rem: " << *Rem << '\n');
+ DeadInsts.push_back(Rem);
+ }
+
+ // Now that we're done iterating through lists, clean up any instructions
+ // which are now dead.
+ while (!DeadInsts.empty())
+ if (Instruction *Inst =
+ dyn_cast_or_null<Instruction>(&*DeadInsts.pop_back_val()))
+ RecursivelyDeleteTriviallyDeadInstructions(Inst);
+}
+
bool IndVarSimplify::runOnLoop(Loop *L, LPPassManager &LPM) {
+ // If LoopSimplify form is not available, stay out of trouble. Some notes:
+ // - LSR currently only supports LoopSimplify-form loops. Indvars'
+ // canonicalization can be a pessimization without LSR to "clean up"
+ // afterwards.
+ // - We depend on having a preheader; in particular,
+ // Loop::getCanonicalInductionVariable only supports loops with preheaders,
+ // and we're in trouble if we can't find the induction variable even when
+ // we've manually inserted one.
+ if (!L->isLoopSimplifyForm())
+ return false;
+
IU = &getAnalysis<IVUsers>();
LI = &getAnalysis<LoopInfo>();
SE = &getAnalysis<ScalarEvolution>();
// the current expressions.
//
if (!isa<SCEVCouldNotCompute>(BackedgeTakenCount))
- RewriteLoopExitValues(L, BackedgeTakenCount, Rewriter);
+ RewriteLoopExitValues(L, Rewriter);
+
+ // Simplify ICmp IV users.
+ EliminateIVComparisons();
+
+ // Simplify SRem and URem IV users.
+ EliminateIVRemainders();
// Compute the type of the largest recurrence expression, and decide whether
// a canonical induction variable should be inserted.
if (ExitingBlock)
NeedCannIV = true;
}
- for (unsigned i = 0, e = IU->StrideOrder.size(); i != e; ++i) {
- const SCEV *Stride = IU->StrideOrder[i];
- const Type *Ty = SE->getEffectiveSCEVType(Stride->getType());
+ for (IVUsers::const_iterator I = IU->begin(), E = IU->end(); I != E; ++I) {
+ const Type *Ty =
+ SE->getEffectiveSCEVType(I->getOperandValToReplace()->getType());
if (!LargestType ||
SE->getTypeSizeInBits(Ty) >
SE->getTypeSizeInBits(LargestType))
LargestType = Ty;
-
- std::map<const SCEV *, IVUsersOfOneStride *>::iterator SI =
- IU->IVUsesByStride.find(IU->StrideOrder[i]);
- assert(SI != IU->IVUsesByStride.end() && "Stride doesn't exist!");
-
- if (!SI->second->Users.empty())
- NeedCannIV = true;
+ NeedCannIV = true;
}
// Now that we know the largest of the induction variable expressions
// in this loop, insert a canonical induction variable of the largest size.
- Value *IndVar = 0;
+ PHINode *IndVar = 0;
if (NeedCannIV) {
- // Check to see if the loop already has a canonical-looking induction
- // variable. If one is present and it's wider than the planned canonical
- // induction variable, temporarily remove it, so that the Rewriter
- // doesn't attempt to reuse it.
- PHINode *OldCannIV = L->getCanonicalInductionVariable();
- if (OldCannIV) {
+ // Check to see if the loop already has any canonical-looking induction
+ // variables. If any are present and wider than the planned canonical
+ // induction variable, temporarily remove them, so that the Rewriter
+ // doesn't attempt to reuse them.
+ SmallVector<PHINode *, 2> OldCannIVs;
+ while (PHINode *OldCannIV = L->getCanonicalInductionVariable()) {
if (SE->getTypeSizeInBits(OldCannIV->getType()) >
SE->getTypeSizeInBits(LargestType))
OldCannIV->removeFromParent();
else
- OldCannIV = 0;
+ break;
+ OldCannIVs.push_back(OldCannIV);
}
IndVar = Rewriter.getOrInsertCanonicalInductionVariable(L, LargestType);
DEBUG(dbgs() << "INDVARS: New CanIV: " << *IndVar << '\n');
// Now that the official induction variable is established, reinsert
- // the old canonical-looking variable after it so that the IR remains
- // consistent. It will be deleted as part of the dead-PHI deletion at
+ // any old canonical-looking variables after it so that the IR remains
+ // consistent. They will be deleted as part of the dead-PHI deletion at
// the end of the pass.
- if (OldCannIV)
- OldCannIV->insertAfter(cast<Instruction>(IndVar));
+ while (!OldCannIVs.empty()) {
+ PHINode *OldCannIV = OldCannIVs.pop_back_val();
+ OldCannIV->insertBefore(L->getHeader()->getFirstNonPHI());
+ }
}
// If we have a trip count expression, rewrite the loop's exit condition
// using it. We can currently only handle loops with a single exit.
ICmpInst *NewICmp = 0;
- if (!isa<SCEVCouldNotCompute>(BackedgeTakenCount) && ExitingBlock) {
+ if (!isa<SCEVCouldNotCompute>(BackedgeTakenCount) &&
+ !BackedgeTakenCount->isZero() &&
+ ExitingBlock) {
assert(NeedCannIV &&
"LinearFunctionTestReplace requires a canonical induction variable");
// Can't rewrite non-branch yet.
}
// Rewrite IV-derived expressions. Clears the rewriter cache.
- RewriteIVExpressions(L, LargestType, Rewriter);
+ RewriteIVExpressions(L, Rewriter);
// The Rewriter may not be used from this point on.
// Clean up dead instructions.
Changed |= DeleteDeadPHIs(L->getHeader());
// Check a post-condition.
- assert(L->isLCSSAForm() && "Indvars did not leave the loop in lcssa form!");
+ assert(L->isLCSSAForm(*DT) && "Indvars did not leave the loop in lcssa form!");
return Changed;
}
-void IndVarSimplify::RewriteIVExpressions(Loop *L, const Type *LargestType,
- SCEVExpander &Rewriter) {
+// FIXME: It is an extremely bad idea to indvar substitute anything more
+// complex than affine induction variables. Doing so will put expensive
+// polynomial evaluations inside of the loop, and the str reduction pass
+// currently can only reduce affine polynomials. For now just disable
+// indvar subst on anything more complex than an affine addrec, unless
+// it can be expanded to a trivial value.
+static bool isSafe(const SCEV *S, const Loop *L, ScalarEvolution *SE) {
+ // Loop-invariant values are safe.
+ if (SE->isLoopInvariant(S, L)) return true;
+
+ // Affine addrecs are safe. Non-affine are not, because LSR doesn't know how
+ // to transform them into efficient code.
+ if (const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(S))
+ return AR->isAffine();
+
+ // An add is safe it all its operands are safe.
+ if (const SCEVCommutativeExpr *Commutative = dyn_cast<SCEVCommutativeExpr>(S)) {
+ for (SCEVCommutativeExpr::op_iterator I = Commutative->op_begin(),
+ E = Commutative->op_end(); I != E; ++I)
+ if (!isSafe(*I, L, SE)) return false;
+ return true;
+ }
+
+ // A cast is safe if its operand is.
+ if (const SCEVCastExpr *C = dyn_cast<SCEVCastExpr>(S))
+ return isSafe(C->getOperand(), L, SE);
+
+ // A udiv is safe if its operands are.
+ if (const SCEVUDivExpr *UD = dyn_cast<SCEVUDivExpr>(S))
+ return isSafe(UD->getLHS(), L, SE) &&
+ isSafe(UD->getRHS(), L, SE);
+
+ // SCEVUnknown is always safe.
+ if (isa<SCEVUnknown>(S))
+ return true;
+
+ // Nothing else is safe.
+ return false;
+}
+
+void IndVarSimplify::RewriteIVExpressions(Loop *L, SCEVExpander &Rewriter) {
SmallVector<WeakVH, 16> DeadInsts;
// Rewrite all induction variable expressions in terms of the canonical
// add the offsets to the primary induction variable and cast, avoiding
// the need for the code evaluation methods to insert induction variables
// of different sizes.
- for (unsigned i = 0, e = IU->StrideOrder.size(); i != e; ++i) {
- const SCEV *Stride = IU->StrideOrder[i];
-
- std::map<const SCEV *, IVUsersOfOneStride *>::iterator SI =
- IU->IVUsesByStride.find(IU->StrideOrder[i]);
- assert(SI != IU->IVUsesByStride.end() && "Stride doesn't exist!");
- ilist<IVStrideUse> &List = SI->second->Users;
- for (ilist<IVStrideUse>::iterator UI = List.begin(),
- E = List.end(); UI != E; ++UI) {
- Value *Op = UI->getOperandValToReplace();
- const Type *UseTy = Op->getType();
- Instruction *User = UI->getUser();
-
- // Compute the final addrec to expand into code.
- const SCEV *AR = IU->getReplacementExpr(*UI);
-
- // Evaluate the expression out of the loop, if possible.
- if (!L->contains(UI->getUser())) {
- const SCEV *ExitVal = SE->getSCEVAtScope(AR, L->getParentLoop());
- if (ExitVal->isLoopInvariant(L))
- AR = ExitVal;
- }
+ for (IVUsers::iterator UI = IU->begin(), E = IU->end(); UI != E; ++UI) {
+ Value *Op = UI->getOperandValToReplace();
+ const Type *UseTy = Op->getType();
+ Instruction *User = UI->getUser();
+
+ // Compute the final addrec to expand into code.
+ const SCEV *AR = IU->getReplacementExpr(*UI);
+
+ // Evaluate the expression out of the loop, if possible.
+ if (!L->contains(UI->getUser())) {
+ const SCEV *ExitVal = SE->getSCEVAtScope(AR, L->getParentLoop());
+ if (SE->isLoopInvariant(ExitVal, L))
+ AR = ExitVal;
+ }
- // FIXME: It is an extremely bad idea to indvar substitute anything more
- // complex than affine induction variables. Doing so will put expensive
- // polynomial evaluations inside of the loop, and the str reduction pass
- // currently can only reduce affine polynomials. For now just disable
- // indvar subst on anything more complex than an affine addrec, unless
- // it can be expanded to a trivial value.
- if (!AR->isLoopInvariant(L) && !Stride->isLoopInvariant(L))
- continue;
+ // FIXME: It is an extremely bad idea to indvar substitute anything more
+ // complex than affine induction variables. Doing so will put expensive
+ // polynomial evaluations inside of the loop, and the str reduction pass
+ // currently can only reduce affine polynomials. For now just disable
+ // indvar subst on anything more complex than an affine addrec, unless
+ // it can be expanded to a trivial value.
+ if (!isSafe(AR, L, SE))
+ continue;
- // Determine the insertion point for this user. By default, insert
- // immediately before the user. The SCEVExpander class will automatically
- // hoist loop invariants out of the loop. For PHI nodes, there may be
- // multiple uses, so compute the nearest common dominator for the
- // incoming blocks.
- Instruction *InsertPt = User;
- if (PHINode *PHI = dyn_cast<PHINode>(InsertPt))
- for (unsigned i = 0, e = PHI->getNumIncomingValues(); i != e; ++i)
- if (PHI->getIncomingValue(i) == Op) {
- if (InsertPt == User)
- InsertPt = PHI->getIncomingBlock(i)->getTerminator();
- else
- InsertPt =
- DT->findNearestCommonDominator(InsertPt->getParent(),
- PHI->getIncomingBlock(i))
- ->getTerminator();
- }
-
- // Now expand it into actual Instructions and patch it into place.
- Value *NewVal = Rewriter.expandCodeFor(AR, UseTy, InsertPt);
-
- // Patch the new value into place.
- if (Op->hasName())
- NewVal->takeName(Op);
- User->replaceUsesOfWith(Op, NewVal);
- UI->setOperandValToReplace(NewVal);
- DEBUG(dbgs() << "INDVARS: Rewrote IV '" << *AR << "' " << *Op << '\n'
- << " into = " << *NewVal << "\n");
- ++NumRemoved;
- Changed = true;
-
- // The old value may be dead now.
- DeadInsts.push_back(Op);
- }
+ // Determine the insertion point for this user. By default, insert
+ // immediately before the user. The SCEVExpander class will automatically
+ // hoist loop invariants out of the loop. For PHI nodes, there may be
+ // multiple uses, so compute the nearest common dominator for the
+ // incoming blocks.
+ Instruction *InsertPt = User;
+ if (PHINode *PHI = dyn_cast<PHINode>(InsertPt))
+ for (unsigned i = 0, e = PHI->getNumIncomingValues(); i != e; ++i)
+ if (PHI->getIncomingValue(i) == Op) {
+ if (InsertPt == User)
+ InsertPt = PHI->getIncomingBlock(i)->getTerminator();
+ else
+ InsertPt =
+ DT->findNearestCommonDominator(InsertPt->getParent(),
+ PHI->getIncomingBlock(i))
+ ->getTerminator();
+ }
+
+ // Now expand it into actual Instructions and patch it into place.
+ Value *NewVal = Rewriter.expandCodeFor(AR, UseTy, InsertPt);
+
+ // Inform ScalarEvolution that this value is changing. The change doesn't
+ // affect its value, but it does potentially affect which use lists the
+ // value will be on after the replacement, which affects ScalarEvolution's
+ // ability to walk use lists and drop dangling pointers when a value is
+ // deleted.
+ SE->forgetValue(User);
+
+ // Patch the new value into place.
+ if (Op->hasName())
+ NewVal->takeName(Op);
+ User->replaceUsesOfWith(Op, NewVal);
+ UI->setOperandValToReplace(NewVal);
+ DEBUG(dbgs() << "INDVARS: Rewrote IV '" << *AR << "' " << *Op << '\n'
+ << " into = " << *NewVal << "\n");
+ ++NumRemoved;
+ Changed = true;
+
+ // The old value may be dead now.
+ DeadInsts.push_back(Op);
}
// Clear the rewriter cache, because values that are in the rewriter's cache
// which are now dead.
while (!DeadInsts.empty())
if (Instruction *Inst =
- dyn_cast_or_null<Instruction>(DeadInsts.pop_back_val()))
+ dyn_cast_or_null<Instruction>(&*DeadInsts.pop_back_val()))
RecursivelyDeleteTriviallyDeadInstructions(Inst);
}
// New instructions were inserted at the end of the preheader.
if (isa<PHINode>(I))
break;
+
// Don't move instructions which might have side effects, since the side
- // effects need to complete before instructions inside the loop. Also
- // don't move instructions which might read memory, since the loop may
- // modify memory. Note that it's okay if the instruction might have
- // undefined behavior: LoopSimplify guarantees that the preheader
- // dominates the exit block.
+ // effects need to complete before instructions inside the loop. Also don't
+ // move instructions which might read memory, since the loop may modify
+ // memory. Note that it's okay if the instruction might have undefined
+ // behavior: LoopSimplify guarantees that the preheader dominates the exit
+ // block.
if (I->mayHaveSideEffects() || I->mayReadFromMemory())
continue;
+
+ // Skip debug info intrinsics.
+ if (isa<DbgInfoIntrinsic>(I))
+ continue;
+
// Don't sink static AllocaInsts out of the entry block, which would
// turn them into dynamic allocas!
if (AllocaInst *AI = dyn_cast<AllocaInst>(I))
if (AI->isStaticAlloca())
continue;
+
// Determine if there is a use in or before the loop (direct or
// otherwise).
bool UsedInLoop = false;
for (Value::use_iterator UI = I->use_begin(), UE = I->use_end();
UI != UE; ++UI) {
- BasicBlock *UseBB = cast<Instruction>(UI)->getParent();
- if (PHINode *P = dyn_cast<PHINode>(UI)) {
+ User *U = *UI;
+ BasicBlock *UseBB = cast<Instruction>(U)->getParent();
+ if (PHINode *P = dyn_cast<PHINode>(U)) {
unsigned i =
PHINode::getIncomingValueNumForOperand(UI.getOperandNo());
UseBB = P->getIncomingBlock(i);
break;
}
}
+
// If there is, the def must remain in the preheader.
if (UsedInLoop)
continue;
+
// Otherwise, sink it to the exit block.
Instruction *ToMove = I;
bool Done = false;
- if (I != Preheader->begin())
- --I;
- else
+
+ if (I != Preheader->begin()) {
+ // Skip debug info intrinsics.
+ do {
+ --I;
+ } while (isa<DbgInfoIntrinsic>(I) && I != Preheader->begin());
+
+ if (isa<DbgInfoIntrinsic>(I) && I == Preheader->begin())
+ Done = true;
+ } else {
Done = true;
+ }
+
ToMove->moveBefore(InsertPt);
- if (Done)
- break;
+ if (Done) break;
InsertPt = ToMove;
}
}
-/// Return true if it is OK to use SIToFPInst for an inducation variable
-/// with given inital and exit values.
-static bool useSIToFPInst(ConstantFP &InitV, ConstantFP &ExitV,
- uint64_t intIV, uint64_t intEV) {
-
- if (InitV.getValueAPF().isNegative() || ExitV.getValueAPF().isNegative())
- return true;
-
- // If the iteration range can be handled by SIToFPInst then use it.
- APInt Max = APInt::getSignedMaxValue(32);
- if (Max.getZExtValue() > static_cast<uint64_t>(abs64(intEV - intIV)))
- return true;
-
- return false;
-}
-
-/// convertToInt - Convert APF to an integer, if possible.
-static bool convertToInt(const APFloat &APF, uint64_t *intVal) {
-
+/// ConvertToSInt - Convert APF to an integer, if possible.
+static bool ConvertToSInt(const APFloat &APF, int64_t &IntVal) {
bool isExact = false;
if (&APF.getSemantics() == &APFloat::PPCDoubleDouble)
return false;
- if (APF.convertToInteger(intVal, 32, APF.isNegative(),
- APFloat::rmTowardZero, &isExact)
- != APFloat::opOK)
- return false;
- if (!isExact)
+ // See if we can convert this to an int64_t
+ uint64_t UIntVal;
+ if (APF.convertToInteger(&UIntVal, 64, true, APFloat::rmTowardZero,
+ &isExact) != APFloat::opOK || !isExact)
return false;
+ IntVal = UIntVal;
return true;
-
}
/// HandleFloatingPointIV - If the loop has floating induction variable
/// for(int i = 0; i < 10000; ++i)
/// bar((double)i);
///
-void IndVarSimplify::HandleFloatingPointIV(Loop *L, PHINode *PH) {
-
- unsigned IncomingEdge = L->contains(PH->getIncomingBlock(0));
+void IndVarSimplify::HandleFloatingPointIV(Loop *L, PHINode *PN) {
+ unsigned IncomingEdge = L->contains(PN->getIncomingBlock(0));
unsigned BackEdge = IncomingEdge^1;
// Check incoming value.
- ConstantFP *InitValue = dyn_cast<ConstantFP>(PH->getIncomingValue(IncomingEdge));
- if (!InitValue) return;
- uint64_t newInitValue =
- Type::getInt32Ty(PH->getContext())->getPrimitiveSizeInBits();
- if (!convertToInt(InitValue->getValueAPF(), &newInitValue))
+ ConstantFP *InitValueVal =
+ dyn_cast<ConstantFP>(PN->getIncomingValue(IncomingEdge));
+
+ int64_t InitValue;
+ if (!InitValueVal || !ConvertToSInt(InitValueVal->getValueAPF(), InitValue))
return;
- // Check IV increment. Reject this PH if increement operation is not
+ // Check IV increment. Reject this PN if increment operation is not
// an add or increment value can not be represented by an integer.
BinaryOperator *Incr =
- dyn_cast<BinaryOperator>(PH->getIncomingValue(BackEdge));
- if (!Incr) return;
- if (Incr->getOpcode() != Instruction::FAdd) return;
- ConstantFP *IncrValue = NULL;
- unsigned IncrVIndex = 1;
- if (Incr->getOperand(1) == PH)
- IncrVIndex = 0;
- IncrValue = dyn_cast<ConstantFP>(Incr->getOperand(IncrVIndex));
- if (!IncrValue) return;
- uint64_t newIncrValue =
- Type::getInt32Ty(PH->getContext())->getPrimitiveSizeInBits();
- if (!convertToInt(IncrValue->getValueAPF(), &newIncrValue))
+ dyn_cast<BinaryOperator>(PN->getIncomingValue(BackEdge));
+ if (Incr == 0 || Incr->getOpcode() != Instruction::FAdd) return;
+
+ // If this is not an add of the PHI with a constantfp, or if the constant fp
+ // is not an integer, bail out.
+ ConstantFP *IncValueVal = dyn_cast<ConstantFP>(Incr->getOperand(1));
+ int64_t IncValue;
+ if (IncValueVal == 0 || Incr->getOperand(0) != PN ||
+ !ConvertToSInt(IncValueVal->getValueAPF(), IncValue))
return;
- // Check Incr uses. One user is PH and the other users is exit condition used
- // by the conditional terminator.
+ // Check Incr uses. One user is PN and the other user is an exit condition
+ // used by the conditional terminator.
Value::use_iterator IncrUse = Incr->use_begin();
- Instruction *U1 = cast<Instruction>(IncrUse++);
+ Instruction *U1 = cast<Instruction>(*IncrUse++);
if (IncrUse == Incr->use_end()) return;
- Instruction *U2 = cast<Instruction>(IncrUse++);
+ Instruction *U2 = cast<Instruction>(*IncrUse++);
if (IncrUse != Incr->use_end()) return;
- // Find exit condition.
- FCmpInst *EC = dyn_cast<FCmpInst>(U1);
- if (!EC)
- EC = dyn_cast<FCmpInst>(U2);
- if (!EC) return;
-
- if (BranchInst *BI = dyn_cast<BranchInst>(EC->getParent()->getTerminator())) {
- if (!BI->isConditional()) return;
- if (BI->getCondition() != EC) return;
- }
-
- // Find exit value. If exit value can not be represented as an interger then
- // do not handle this floating point PH.
- ConstantFP *EV = NULL;
- unsigned EVIndex = 1;
- if (EC->getOperand(1) == Incr)
- EVIndex = 0;
- EV = dyn_cast<ConstantFP>(EC->getOperand(EVIndex));
- if (!EV) return;
- uint64_t intEV = Type::getInt32Ty(PH->getContext())->getPrimitiveSizeInBits();
- if (!convertToInt(EV->getValueAPF(), &intEV))
+ // Find exit condition, which is an fcmp. If it doesn't exist, or if it isn't
+ // only used by a branch, we can't transform it.
+ FCmpInst *Compare = dyn_cast<FCmpInst>(U1);
+ if (!Compare)
+ Compare = dyn_cast<FCmpInst>(U2);
+ if (Compare == 0 || !Compare->hasOneUse() ||
+ !isa<BranchInst>(Compare->use_back()))
return;
-
+
+ BranchInst *TheBr = cast<BranchInst>(Compare->use_back());
+
+ // We need to verify that the branch actually controls the iteration count
+ // of the loop. If not, the new IV can overflow and no one will notice.
+ // The branch block must be in the loop and one of the successors must be out
+ // of the loop.
+ assert(TheBr->isConditional() && "Can't use fcmp if not conditional");
+ if (!L->contains(TheBr->getParent()) ||
+ (L->contains(TheBr->getSuccessor(0)) &&
+ L->contains(TheBr->getSuccessor(1))))
+ return;
+
+
+ // If it isn't a comparison with an integer-as-fp (the exit value), we can't
+ // transform it.
+ ConstantFP *ExitValueVal = dyn_cast<ConstantFP>(Compare->getOperand(1));
+ int64_t ExitValue;
+ if (ExitValueVal == 0 ||
+ !ConvertToSInt(ExitValueVal->getValueAPF(), ExitValue))
+ return;
+
// Find new predicate for integer comparison.
CmpInst::Predicate NewPred = CmpInst::BAD_ICMP_PREDICATE;
- switch (EC->getPredicate()) {
+ switch (Compare->getPredicate()) {
+ default: return; // Unknown comparison.
case CmpInst::FCMP_OEQ:
- case CmpInst::FCMP_UEQ:
- NewPred = CmpInst::ICMP_EQ;
- break;
+ case CmpInst::FCMP_UEQ: NewPred = CmpInst::ICMP_EQ; break;
+ case CmpInst::FCMP_ONE:
+ case CmpInst::FCMP_UNE: NewPred = CmpInst::ICMP_NE; break;
case CmpInst::FCMP_OGT:
- case CmpInst::FCMP_UGT:
- NewPred = CmpInst::ICMP_UGT;
- break;
+ case CmpInst::FCMP_UGT: NewPred = CmpInst::ICMP_SGT; break;
case CmpInst::FCMP_OGE:
- case CmpInst::FCMP_UGE:
- NewPred = CmpInst::ICMP_UGE;
- break;
+ case CmpInst::FCMP_UGE: NewPred = CmpInst::ICMP_SGE; break;
case CmpInst::FCMP_OLT:
- case CmpInst::FCMP_ULT:
- NewPred = CmpInst::ICMP_ULT;
- break;
+ case CmpInst::FCMP_ULT: NewPred = CmpInst::ICMP_SLT; break;
case CmpInst::FCMP_OLE:
- case CmpInst::FCMP_ULE:
- NewPred = CmpInst::ICMP_ULE;
- break;
- default:
- break;
+ case CmpInst::FCMP_ULE: NewPred = CmpInst::ICMP_SLE; break;
}
- if (NewPred == CmpInst::BAD_ICMP_PREDICATE) return;
+
+ // We convert the floating point induction variable to a signed i32 value if
+ // we can. This is only safe if the comparison will not overflow in a way
+ // that won't be trapped by the integer equivalent operations. Check for this
+ // now.
+ // TODO: We could use i64 if it is native and the range requires it.
+
+ // The start/stride/exit values must all fit in signed i32.
+ if (!isInt<32>(InitValue) || !isInt<32>(IncValue) || !isInt<32>(ExitValue))
+ return;
+
+ // If not actually striding (add x, 0.0), avoid touching the code.
+ if (IncValue == 0)
+ return;
+
+ // Positive and negative strides have different safety conditions.
+ if (IncValue > 0) {
+ // If we have a positive stride, we require the init to be less than the
+ // exit value and an equality or less than comparison.
+ if (InitValue >= ExitValue ||
+ NewPred == CmpInst::ICMP_SGT || NewPred == CmpInst::ICMP_SGE)
+ return;
+
+ uint32_t Range = uint32_t(ExitValue-InitValue);
+ if (NewPred == CmpInst::ICMP_SLE) {
+ // Normalize SLE -> SLT, check for infinite loop.
+ if (++Range == 0) return; // Range overflows.
+ }
+
+ unsigned Leftover = Range % uint32_t(IncValue);
+
+ // If this is an equality comparison, we require that the strided value
+ // exactly land on the exit value, otherwise the IV condition will wrap
+ // around and do things the fp IV wouldn't.
+ if ((NewPred == CmpInst::ICMP_EQ || NewPred == CmpInst::ICMP_NE) &&
+ Leftover != 0)
+ return;
+
+ // If the stride would wrap around the i32 before exiting, we can't
+ // transform the IV.
+ if (Leftover != 0 && int32_t(ExitValue+IncValue) < ExitValue)
+ return;
+
+ } else {
+ // If we have a negative stride, we require the init to be greater than the
+ // exit value and an equality or greater than comparison.
+ if (InitValue >= ExitValue ||
+ NewPred == CmpInst::ICMP_SLT || NewPred == CmpInst::ICMP_SLE)
+ return;
+
+ uint32_t Range = uint32_t(InitValue-ExitValue);
+ if (NewPred == CmpInst::ICMP_SGE) {
+ // Normalize SGE -> SGT, check for infinite loop.
+ if (++Range == 0) return; // Range overflows.
+ }
+
+ unsigned Leftover = Range % uint32_t(-IncValue);
+
+ // If this is an equality comparison, we require that the strided value
+ // exactly land on the exit value, otherwise the IV condition will wrap
+ // around and do things the fp IV wouldn't.
+ if ((NewPred == CmpInst::ICMP_EQ || NewPred == CmpInst::ICMP_NE) &&
+ Leftover != 0)
+ return;
+
+ // If the stride would wrap around the i32 before exiting, we can't
+ // transform the IV.
+ if (Leftover != 0 && int32_t(ExitValue+IncValue) > ExitValue)
+ return;
+ }
+
+ const IntegerType *Int32Ty = Type::getInt32Ty(PN->getContext());
// Insert new integer induction variable.
- PHINode *NewPHI = PHINode::Create(Type::getInt32Ty(PH->getContext()),
- PH->getName()+".int", PH);
- NewPHI->addIncoming(ConstantInt::get(Type::getInt32Ty(PH->getContext()),
- newInitValue),
- PH->getIncomingBlock(IncomingEdge));
-
- Value *NewAdd = BinaryOperator::CreateAdd(NewPHI,
- ConstantInt::get(Type::getInt32Ty(PH->getContext()),
- newIncrValue),
- Incr->getName()+".int", Incr);
- NewPHI->addIncoming(NewAdd, PH->getIncomingBlock(BackEdge));
-
- // The back edge is edge 1 of newPHI, whatever it may have been in the
- // original PHI.
- ConstantInt *NewEV = ConstantInt::get(Type::getInt32Ty(PH->getContext()),
- intEV);
- Value *LHS = (EVIndex == 1 ? NewPHI->getIncomingValue(1) : NewEV);
- Value *RHS = (EVIndex == 1 ? NewEV : NewPHI->getIncomingValue(1));
- ICmpInst *NewEC = new ICmpInst(EC->getParent()->getTerminator(),
- NewPred, LHS, RHS, EC->getName());
-
- // In the following deltions, PH may become dead and may be deleted.
+ PHINode *NewPHI = PHINode::Create(Int32Ty, PN->getName()+".int", PN);
+ NewPHI->addIncoming(ConstantInt::get(Int32Ty, InitValue),
+ PN->getIncomingBlock(IncomingEdge));
+
+ Value *NewAdd =
+ BinaryOperator::CreateAdd(NewPHI, ConstantInt::get(Int32Ty, IncValue),
+ Incr->getName()+".int", Incr);
+ NewPHI->addIncoming(NewAdd, PN->getIncomingBlock(BackEdge));
+
+ ICmpInst *NewCompare = new ICmpInst(TheBr, NewPred, NewAdd,
+ ConstantInt::get(Int32Ty, ExitValue),
+ Compare->getName());
+
+ // In the following deletions, PN may become dead and may be deleted.
// Use a WeakVH to observe whether this happens.
- WeakVH WeakPH = PH;
+ WeakVH WeakPH = PN;
- // Delete old, floating point, exit comparision instruction.
- NewEC->takeName(EC);
- EC->replaceAllUsesWith(NewEC);
- RecursivelyDeleteTriviallyDeadInstructions(EC);
+ // Delete the old floating point exit comparison. The branch starts using the
+ // new comparison.
+ NewCompare->takeName(Compare);
+ Compare->replaceAllUsesWith(NewCompare);
+ RecursivelyDeleteTriviallyDeadInstructions(Compare);
- // Delete old, floating point, increment instruction.
+ // Delete the old floating point increment.
Incr->replaceAllUsesWith(UndefValue::get(Incr->getType()));
RecursivelyDeleteTriviallyDeadInstructions(Incr);
- // Replace floating induction variable, if it isn't already deleted.
- // Give SIToFPInst preference over UIToFPInst because it is faster on
- // platforms that are widely used.
- if (WeakPH && !PH->use_empty()) {
- if (useSIToFPInst(*InitValue, *EV, newInitValue, intEV)) {
- SIToFPInst *Conv = new SIToFPInst(NewPHI, PH->getType(), "indvar.conv",
- PH->getParent()->getFirstNonPHI());
- PH->replaceAllUsesWith(Conv);
- } else {
- UIToFPInst *Conv = new UIToFPInst(NewPHI, PH->getType(), "indvar.conv",
- PH->getParent()->getFirstNonPHI());
- PH->replaceAllUsesWith(Conv);
- }
- RecursivelyDeleteTriviallyDeadInstructions(PH);
+ // If the FP induction variable still has uses, this is because something else
+ // in the loop uses its value. In order to canonicalize the induction
+ // variable, we chose to eliminate the IV and rewrite it in terms of an
+ // int->fp cast.
+ //
+ // We give preference to sitofp over uitofp because it is faster on most
+ // platforms.
+ if (WeakPH) {
+ Value *Conv = new SIToFPInst(NewPHI, PN->getType(), "indvar.conv",
+ PN->getParent()->getFirstNonPHI());
+ PN->replaceAllUsesWith(Conv);
+ RecursivelyDeleteTriviallyDeadInstructions(PN);
}
// Add a new IVUsers entry for the newly-created integer PHI.