#define DEBUG_TYPE "x86-isel"
#include "X86.h"
#include "X86InstrBuilder.h"
-#include "X86ISelLowering.h"
#include "X86MachineFunctionInfo.h"
#include "X86RegisterInfo.h"
#include "X86Subtarget.h"
#include "X86TargetMachine.h"
-#include "llvm/GlobalValue.h"
#include "llvm/Instructions.h"
#include "llvm/Intrinsics.h"
#include "llvm/Support/CFG.h"
#include "llvm/CodeGen/SelectionDAGISel.h"
#include "llvm/Target/TargetMachine.h"
#include "llvm/Target/TargetOptions.h"
-#include "llvm/Support/Compiler.h"
#include "llvm/Support/Debug.h"
+#include "llvm/Support/ErrorHandling.h"
#include "llvm/Support/MathExtras.h"
-#include "llvm/Support/Streams.h"
+#include "llvm/Support/raw_ostream.h"
#include "llvm/ADT/SmallPtrSet.h"
#include "llvm/ADT/Statistic.h"
using namespace llvm;
-#include "llvm/Support/CommandLine.h"
-static cl::opt<bool> AvoidDupAddrCompute("x86-avoid-dup-address", cl::Hidden);
-
STATISTIC(NumLoadMoved, "Number of loads moved below TokenFactor");
//===----------------------------------------------------------------------===//
FrameIndexBase
} BaseType;
- struct { // This is really a union, discriminated by BaseType!
- SDValue Reg;
- int FrameIndex;
- } Base;
+ // This is really a union, discriminated by BaseType!
+ SDValue Base_Reg;
+ int Base_FrameIndex;
- bool isRIPRel; // RIP as base?
unsigned Scale;
SDValue IndexReg;
int32_t Disp;
SDValue Segment;
- GlobalValue *GV;
- Constant *CP;
+ const GlobalValue *GV;
+ const Constant *CP;
+ const BlockAddress *BlockAddr;
const char *ES;
int JT;
unsigned Align; // CP alignment.
+ unsigned char SymbolFlags; // X86II::MO_*
X86ISelAddressMode()
- : BaseType(RegBase), isRIPRel(false), Scale(1), IndexReg(), Disp(0),
- Segment(), GV(0), CP(0), ES(0), JT(-1), Align(0) {
+ : BaseType(RegBase), Base_FrameIndex(0), Scale(1), IndexReg(), Disp(0),
+ Segment(), GV(0), CP(0), BlockAddr(0), ES(0), JT(-1), Align(0),
+ SymbolFlags(X86II::MO_NO_FLAG) {
}
bool hasSymbolicDisplacement() const {
- return GV != 0 || CP != 0 || ES != 0 || JT != -1;
+ return GV != 0 || CP != 0 || ES != 0 || JT != -1 || BlockAddr != 0;
+ }
+
+ bool hasBaseOrIndexReg() const {
+ return IndexReg.getNode() != 0 || Base_Reg.getNode() != 0;
+ }
+
+ /// isRIPRelative - Return true if this addressing mode is already RIP
+ /// relative.
+ bool isRIPRelative() const {
+ if (BaseType != RegBase) return false;
+ if (RegisterSDNode *RegNode =
+ dyn_cast_or_null<RegisterSDNode>(Base_Reg.getNode()))
+ return RegNode->getReg() == X86::RIP;
+ return false;
+ }
+
+ void setBaseReg(SDValue Reg) {
+ BaseType = RegBase;
+ Base_Reg = Reg;
}
void dump() {
- cerr << "X86ISelAddressMode " << this << "\n";
- cerr << "Base.Reg ";
- if (Base.Reg.getNode() != 0) Base.Reg.getNode()->dump();
- else cerr << "nul";
- cerr << " Base.FrameIndex " << Base.FrameIndex << "\n";
- cerr << "isRIPRel " << isRIPRel << " Scale" << Scale << "\n";
- cerr << "IndexReg ";
- if (IndexReg.getNode() != 0) IndexReg.getNode()->dump();
- else cerr << "nul";
- cerr << " Disp " << Disp << "\n";
- cerr << "GV "; if (GV) GV->dump();
- else cerr << "nul";
- cerr << " CP "; if (CP) CP->dump();
- else cerr << "nul";
- cerr << "\n";
- cerr << "ES "; if (ES) cerr << ES; else cerr << "nul";
- cerr << " JT" << JT << " Align" << Align << "\n";
+ dbgs() << "X86ISelAddressMode " << this << '\n';
+ dbgs() << "Base_Reg ";
+ if (Base_Reg.getNode() != 0)
+ Base_Reg.getNode()->dump();
+ else
+ dbgs() << "nul";
+ dbgs() << " Base.FrameIndex " << Base_FrameIndex << '\n'
+ << " Scale" << Scale << '\n'
+ << "IndexReg ";
+ if (IndexReg.getNode() != 0)
+ IndexReg.getNode()->dump();
+ else
+ dbgs() << "nul";
+ dbgs() << " Disp " << Disp << '\n'
+ << "GV ";
+ if (GV)
+ GV->dump();
+ else
+ dbgs() << "nul";
+ dbgs() << " CP ";
+ if (CP)
+ CP->dump();
+ else
+ dbgs() << "nul";
+ dbgs() << '\n'
+ << "ES ";
+ if (ES)
+ dbgs() << ES;
+ else
+ dbgs() << "nul";
+ dbgs() << " JT" << JT << " Align" << Align << '\n';
}
};
}
/// ISel - X86 specific code to select X86 machine instructions for
/// SelectionDAG operations.
///
- class VISIBILITY_HIDDEN X86DAGToDAGISel : public SelectionDAGISel {
- /// TM - Keep a reference to X86TargetMachine.
- ///
- X86TargetMachine &TM;
-
+ class X86DAGToDAGISel : public SelectionDAGISel {
/// X86Lowering - This object fully describes how to lower LLVM code to an
/// X86-specific SelectionDAG.
- X86TargetLowering &X86Lowering;
+ const X86TargetLowering &X86Lowering;
/// Subtarget - Keep a pointer to the X86Subtarget around so that we can
/// make the right decision when generating code for different targets.
const X86Subtarget *Subtarget;
- /// CurBB - Current BB being isel'd.
- ///
- MachineBasicBlock *CurBB;
-
/// OptForSize - If true, selector should try to optimize for code size
/// instead of performance.
bool OptForSize;
public:
- X86DAGToDAGISel(X86TargetMachine &tm, bool fast)
- : SelectionDAGISel(tm, fast),
- TM(tm), X86Lowering(*TM.getTargetLowering()),
- Subtarget(&TM.getSubtarget<X86Subtarget>()),
+ explicit X86DAGToDAGISel(X86TargetMachine &tm, CodeGenOpt::Level OptLevel)
+ : SelectionDAGISel(tm, OptLevel),
+ X86Lowering(*tm.getTargetLowering()),
+ Subtarget(&tm.getSubtarget<X86Subtarget>()),
OptForSize(false) {}
virtual const char *getPassName() const {
return "X86 DAG->DAG Instruction Selection";
}
- /// InstructionSelect - This callback is invoked by
- /// SelectionDAGISel when it has created a SelectionDAG for us to codegen.
- virtual void InstructionSelect();
+ virtual void EmitFunctionEntryCode();
- virtual void EmitFunctionEntryCode(Function &Fn, MachineFunction &MF);
+ virtual bool IsProfitableToFold(SDValue N, SDNode *U, SDNode *Root) const;
- virtual
- bool IsLegalAndProfitableToFold(SDNode *N, SDNode *U, SDNode *Root) const;
+ virtual void PreprocessISelDAG();
// Include the pieces autogenerated from the target description.
#include "X86GenDAGISel.inc"
private:
- SDNode *Select(SDValue N);
+ SDNode *Select(SDNode *N);
SDNode *SelectAtomic64(SDNode *Node, unsigned Opc);
+ SDNode *SelectAtomicLoadAdd(SDNode *Node, EVT NVT);
bool MatchSegmentBaseAddress(SDValue N, X86ISelAddressMode &AM);
bool MatchLoad(SDValue N, X86ISelAddressMode &AM);
bool MatchWrapper(SDValue N, X86ISelAddressMode &AM);
- bool MatchAddress(SDValue N, X86ISelAddressMode &AM,
- unsigned Depth = 0);
+ bool MatchAddress(SDValue N, X86ISelAddressMode &AM);
+ bool MatchAddressRecursively(SDValue N, X86ISelAddressMode &AM,
+ unsigned Depth);
bool MatchAddressBase(SDValue N, X86ISelAddressMode &AM);
- bool SelectAddr(SDValue Op, SDValue N, SDValue &Base,
+ bool SelectAddr(SDNode *Op, SDValue N, SDValue &Base,
SDValue &Scale, SDValue &Index, SDValue &Disp,
SDValue &Segment);
- bool SelectLEAAddr(SDValue Op, SDValue N, SDValue &Base,
- SDValue &Scale, SDValue &Index, SDValue &Disp);
- bool SelectScalarSSELoad(SDValue Op, SDValue Pred,
- SDValue N, SDValue &Base, SDValue &Scale,
+ bool SelectLEAAddr(SDNode *Op, SDValue N, SDValue &Base,
+ SDValue &Scale, SDValue &Index, SDValue &Disp,
+ SDValue &Segment);
+ bool SelectTLSADDRAddr(SDNode *Op, SDValue N, SDValue &Base,
+ SDValue &Scale, SDValue &Index, SDValue &Disp,
+ SDValue &Segment);
+ bool SelectScalarSSELoad(SDNode *Root, SDValue N,
+ SDValue &Base, SDValue &Scale,
SDValue &Index, SDValue &Disp,
SDValue &Segment,
- SDValue &InChain, SDValue &OutChain);
- bool TryFoldLoad(SDValue P, SDValue N,
+ SDValue &NodeWithChain);
+
+ bool TryFoldLoad(SDNode *P, SDValue N,
SDValue &Base, SDValue &Scale,
SDValue &Index, SDValue &Disp,
SDValue &Segment);
- void PreprocessForRMW();
- void PreprocessForFPConvert();
-
+
/// SelectInlineAsmMemoryOperand - Implement addressing mode selection for
/// inline asm expressions.
virtual bool SelectInlineAsmMemoryOperand(const SDValue &Op,
SDValue &Scale, SDValue &Index,
SDValue &Disp, SDValue &Segment) {
Base = (AM.BaseType == X86ISelAddressMode::FrameIndexBase) ?
- CurDAG->getTargetFrameIndex(AM.Base.FrameIndex, TLI.getPointerTy()) :
- AM.Base.Reg;
+ CurDAG->getTargetFrameIndex(AM.Base_FrameIndex, TLI.getPointerTy()) :
+ AM.Base_Reg;
Scale = getI8Imm(AM.Scale);
Index = AM.IndexReg;
// These are 32-bit even in 64-bit mode since RIP relative offset
// is 32-bit.
if (AM.GV)
- Disp = CurDAG->getTargetGlobalAddress(AM.GV, MVT::i32, AM.Disp);
+ Disp = CurDAG->getTargetGlobalAddress(AM.GV, DebugLoc(),
+ MVT::i32, AM.Disp,
+ AM.SymbolFlags);
else if (AM.CP)
Disp = CurDAG->getTargetConstantPool(AM.CP, MVT::i32,
- AM.Align, AM.Disp);
+ AM.Align, AM.Disp, AM.SymbolFlags);
else if (AM.ES)
- Disp = CurDAG->getTargetExternalSymbol(AM.ES, MVT::i32);
+ Disp = CurDAG->getTargetExternalSymbol(AM.ES, MVT::i32, AM.SymbolFlags);
else if (AM.JT != -1)
- Disp = CurDAG->getTargetJumpTable(AM.JT, MVT::i32);
+ Disp = CurDAG->getTargetJumpTable(AM.JT, MVT::i32, AM.SymbolFlags);
+ else if (AM.BlockAddr)
+ Disp = CurDAG->getBlockAddress(AM.BlockAddr, MVT::i32,
+ true, AM.SymbolFlags);
else
Disp = CurDAG->getTargetConstant(AM.Disp, MVT::i32);
///
SDNode *getGlobalBaseReg();
-#ifndef NDEBUG
- unsigned Indent;
-#endif
- };
-}
-
-/// findFlagUse - Return use of MVT::Flag value produced by the specified
-/// SDNode.
-///
-static SDNode *findFlagUse(SDNode *N) {
- unsigned FlagResNo = N->getNumValues()-1;
- for (SDNode::use_iterator I = N->use_begin(), E = N->use_end(); I != E; ++I) {
- SDUse &Use = I.getUse();
- if (Use.getResNo() == FlagResNo)
- return Use.getUser();
- }
- return NULL;
-}
-
-/// findNonImmUse - Return true if "Use" is a non-immediate use of "Def".
-/// This function recursively traverses up the operand chain, ignoring
-/// certain nodes.
-static bool findNonImmUse(SDNode *Use, SDNode* Def, SDNode *ImmedUse,
- SDNode *Root,
- SmallPtrSet<SDNode*, 16> &Visited) {
- if (Use->getNodeId() < Def->getNodeId() ||
- !Visited.insert(Use))
- return false;
-
- for (unsigned i = 0, e = Use->getNumOperands(); i != e; ++i) {
- SDNode *N = Use->getOperand(i).getNode();
- if (N == Def) {
- if (Use == ImmedUse || Use == Root)
- continue; // We are not looking for immediate use.
- assert(N != Root);
- return true;
+ /// getTargetMachine - Return a reference to the TargetMachine, casted
+ /// to the target-specific type.
+ const X86TargetMachine &getTargetMachine() {
+ return static_cast<const X86TargetMachine &>(TM);
}
- // Traverse up the operand chain.
- if (findNonImmUse(N, Def, ImmedUse, Root, Visited))
- return true;
- }
- return false;
+ /// getInstrInfo - Return a reference to the TargetInstrInfo, casted
+ /// to the target-specific type.
+ const X86InstrInfo *getInstrInfo() {
+ return getTargetMachine().getInstrInfo();
+ }
+ };
}
-/// isNonImmUse - Start searching from Root up the DAG to check is Def can
-/// be reached. Return true if that's the case. However, ignore direct uses
-/// by ImmedUse (which would be U in the example illustrated in
-/// IsLegalAndProfitableToFold) and by Root (which can happen in the store
-/// case).
-/// FIXME: to be really generic, we should allow direct use by any node
-/// that is being folded. But realisticly since we only fold loads which
-/// have one non-chain use, we only need to watch out for load/op/store
-/// and load/op/cmp case where the root (store / cmp) may reach the load via
-/// its chain operand.
-static inline bool isNonImmUse(SDNode *Root, SDNode *Def, SDNode *ImmedUse) {
- SmallPtrSet<SDNode*, 16> Visited;
- return findNonImmUse(Root, Def, ImmedUse, Root, Visited);
-}
+bool
+X86DAGToDAGISel::IsProfitableToFold(SDValue N, SDNode *U, SDNode *Root) const {
+ if (OptLevel == CodeGenOpt::None) return false;
-bool X86DAGToDAGISel::IsLegalAndProfitableToFold(SDNode *N, SDNode *U,
- SDNode *Root) const {
- if (Fast) return false;
+ if (!N.hasOneUse())
+ return false;
- if (U == Root)
+ if (N.getOpcode() != ISD::LOAD)
+ return true;
+
+ // If N is a load, do additional profitability checks.
+ if (U == Root) {
switch (U->getOpcode()) {
default: break;
+ case X86ISD::ADD:
+ case X86ISD::SUB:
+ case X86ISD::AND:
+ case X86ISD::XOR:
+ case X86ISD::OR:
case ISD::ADD:
case ISD::ADDC:
case ISD::ADDE:
}
}
}
-
- // If Root use can somehow reach N through a path that that doesn't contain
- // U then folding N would create a cycle. e.g. In the following
- // diagram, Root can reach N through X. If N is folded into into Root, then
- // X is both a predecessor and a successor of U.
- //
- // [N*] //
- // ^ ^ //
- // / \ //
- // [U*] [X]? //
- // ^ ^ //
- // \ / //
- // \ / //
- // [Root*] //
- //
- // * indicates nodes to be folded together.
- //
- // If Root produces a flag, then it gets (even more) interesting. Since it
- // will be "glued" together with its flag use in the scheduler, we need to
- // check if it might reach N.
- //
- // [N*] //
- // ^ ^ //
- // / \ //
- // [U*] [X]? //
- // ^ ^ //
- // \ \ //
- // \ | //
- // [Root*] | //
- // ^ | //
- // f | //
- // | / //
- // [Y] / //
- // ^ / //
- // f / //
- // | / //
- // [FU] //
- //
- // If FU (flag use) indirectly reaches N (the load), and Root folds N
- // (call it Fold), then X is a predecessor of FU and a successor of
- // Fold. But since Fold and FU are flagged together, this will create
- // a cycle in the scheduling graph.
-
- MVT VT = Root->getValueType(Root->getNumValues()-1);
- while (VT == MVT::Flag) {
- SDNode *FU = findFlagUse(Root);
- if (FU == NULL)
- break;
- Root = FU;
- VT = Root->getValueType(Root->getNumValues()-1);
}
- return !isNonImmUse(Root, N, U);
-}
-
-/// MoveBelowTokenFactor - Replace TokenFactor operand with load's chain operand
-/// and move load below the TokenFactor. Replace store's chain operand with
-/// load's chain result.
-static void MoveBelowTokenFactor(SelectionDAG *CurDAG, SDValue Load,
- SDValue Store, SDValue TF) {
- SmallVector<SDValue, 4> Ops;
- for (unsigned i = 0, e = TF.getNode()->getNumOperands(); i != e; ++i)
- if (Load.getNode() == TF.getOperand(i).getNode())
- Ops.push_back(Load.getOperand(0));
- else
- Ops.push_back(TF.getOperand(i));
- CurDAG->UpdateNodeOperands(TF, &Ops[0], Ops.size());
- CurDAG->UpdateNodeOperands(Load, TF, Load.getOperand(1), Load.getOperand(2));
- CurDAG->UpdateNodeOperands(Store, Load.getValue(1), Store.getOperand(1),
- Store.getOperand(2), Store.getOperand(3));
-}
-
-/// isRMWLoad - Return true if N is a load that's part of RMW sub-DAG.
-///
-static bool isRMWLoad(SDValue N, SDValue Chain, SDValue Address,
- SDValue &Load) {
- if (N.getOpcode() == ISD::BIT_CONVERT)
- N = N.getOperand(0);
-
- LoadSDNode *LD = dyn_cast<LoadSDNode>(N);
- if (!LD || LD->isVolatile())
- return false;
- if (LD->getAddressingMode() != ISD::UNINDEXED)
- return false;
-
- ISD::LoadExtType ExtType = LD->getExtensionType();
- if (ExtType != ISD::NON_EXTLOAD && ExtType != ISD::EXTLOAD)
- return false;
-
- if (N.hasOneUse() &&
- N.getOperand(1) == Address &&
- N.getNode()->isOperandOf(Chain.getNode())) {
- Load = N;
- return true;
- }
- return false;
+ return true;
}
-/// MoveBelowCallSeqStart - Replace CALLSEQ_START operand with load's chain
-/// operand and move load below the call's chain operand.
-static void MoveBelowCallSeqStart(SelectionDAG *CurDAG, SDValue Load,
- SDValue Call, SDValue CallSeqStart) {
+/// MoveBelowCallOrigChain - Replace the original chain operand of the call with
+/// load's chain operand and move load below the call's chain operand.
+static void MoveBelowOrigChain(SelectionDAG *CurDAG, SDValue Load,
+ SDValue Call, SDValue OrigChain) {
SmallVector<SDValue, 8> Ops;
- SDValue Chain = CallSeqStart.getOperand(0);
+ SDValue Chain = OrigChain.getOperand(0);
if (Chain.getNode() == Load.getNode())
Ops.push_back(Load.getOperand(0));
else {
assert(Chain.getOpcode() == ISD::TokenFactor &&
- "Unexpected CallSeqStart chain operand");
+ "Unexpected chain operand");
for (unsigned i = 0, e = Chain.getNumOperands(); i != e; ++i)
if (Chain.getOperand(i).getNode() == Load.getNode())
Ops.push_back(Load.getOperand(0));
Ops.clear();
Ops.push_back(NewChain);
}
- for (unsigned i = 1, e = CallSeqStart.getNumOperands(); i != e; ++i)
- Ops.push_back(CallSeqStart.getOperand(i));
- CurDAG->UpdateNodeOperands(CallSeqStart, &Ops[0], Ops.size());
- CurDAG->UpdateNodeOperands(Load, Call.getOperand(0),
+ for (unsigned i = 1, e = OrigChain.getNumOperands(); i != e; ++i)
+ Ops.push_back(OrigChain.getOperand(i));
+ CurDAG->UpdateNodeOperands(OrigChain.getNode(), &Ops[0], Ops.size());
+ CurDAG->UpdateNodeOperands(Load.getNode(), Call.getOperand(0),
Load.getOperand(1), Load.getOperand(2));
Ops.clear();
Ops.push_back(SDValue(Load.getNode(), 1));
for (unsigned i = 1, e = Call.getNode()->getNumOperands(); i != e; ++i)
Ops.push_back(Call.getOperand(i));
- CurDAG->UpdateNodeOperands(Call, &Ops[0], Ops.size());
+ CurDAG->UpdateNodeOperands(Call.getNode(), &Ops[0], Ops.size());
}
/// isCalleeLoad - Return true if call address is a load and it can be
/// moved below CALLSEQ_START and the chains leading up to the call.
/// Return the CALLSEQ_START by reference as a second output.
-static bool isCalleeLoad(SDValue Callee, SDValue &Chain) {
+/// In the case of a tail call, there isn't a callseq node between the call
+/// chain and the load.
+static bool isCalleeLoad(SDValue Callee, SDValue &Chain, bool HasCallSeq) {
if (Callee.getNode() == Chain.getNode() || !Callee.hasOneUse())
return false;
LoadSDNode *LD = dyn_cast<LoadSDNode>(Callee.getNode());
return false;
// Now let's find the callseq_start.
- while (Chain.getOpcode() != ISD::CALLSEQ_START) {
+ while (HasCallSeq && Chain.getOpcode() != ISD::CALLSEQ_START) {
if (!Chain.hasOneUse())
return false;
Chain = Chain.getOperand(0);
}
-
+
+ if (!Chain.getNumOperands())
+ return false;
if (Chain.getOperand(0).getNode() == Callee.getNode())
return true;
if (Chain.getOperand(0).getOpcode() == ISD::TokenFactor &&
- Callee.getValue(1).isOperandOf(Chain.getOperand(0).getNode()))
+ Callee.getValue(1).isOperandOf(Chain.getOperand(0).getNode()) &&
+ Callee.getValue(1).hasOneUse())
return true;
return false;
}
-
-/// PreprocessForRMW - Preprocess the DAG to make instruction selection better.
-/// This is only run if not in -fast mode (aka -O0).
-/// This allows the instruction selector to pick more read-modify-write
-/// instructions. This is a common case:
-///
-/// [Load chain]
-/// ^
-/// |
-/// [Load]
-/// ^ ^
-/// | |
-/// / \-
-/// / |
-/// [TokenFactor] [Op]
-/// ^ ^
-/// | |
-/// \ /
-/// \ /
-/// [Store]
-///
-/// The fact the store's chain operand != load's chain will prevent the
-/// (store (op (load))) instruction from being selected. We can transform it to:
-///
-/// [Load chain]
-/// ^
-/// |
-/// [TokenFactor]
-/// ^
-/// |
-/// [Load]
-/// ^ ^
-/// | |
-/// | \-
-/// | |
-/// | [Op]
-/// | ^
-/// | |
-/// \ /
-/// \ /
-/// [Store]
-void X86DAGToDAGISel::PreprocessForRMW() {
+void X86DAGToDAGISel::PreprocessISelDAG() {
+ // OptForSize is used in pattern predicates that isel is matching.
+ OptForSize = MF->getFunction()->hasFnAttr(Attribute::OptimizeForSize);
+
for (SelectionDAG::allnodes_iterator I = CurDAG->allnodes_begin(),
- E = CurDAG->allnodes_end(); I != E; ++I) {
- if (I->getOpcode() == X86ISD::CALL) {
+ E = CurDAG->allnodes_end(); I != E; ) {
+ SDNode *N = I++; // Preincrement iterator to avoid invalidation issues.
+
+ if (OptLevel != CodeGenOpt::None &&
+ (N->getOpcode() == X86ISD::CALL ||
+ N->getOpcode() == X86ISD::TC_RETURN)) {
/// Also try moving call address load from outside callseq_start to just
/// before the call to allow it to be folded.
///
/// \ /
/// \ /
/// [CALL]
- SDValue Chain = I->getOperand(0);
- SDValue Load = I->getOperand(1);
- if (!isCalleeLoad(Load, Chain))
+ bool HasCallSeq = N->getOpcode() == X86ISD::CALL;
+ SDValue Chain = N->getOperand(0);
+ SDValue Load = N->getOperand(1);
+ if (!isCalleeLoad(Load, Chain, HasCallSeq))
continue;
- MoveBelowCallSeqStart(CurDAG, Load, SDValue(I, 0), Chain);
+ MoveBelowOrigChain(CurDAG, Load, SDValue(N, 0), Chain);
++NumLoadMoved;
continue;
}
-
- if (!ISD::isNON_TRUNCStore(I))
- continue;
- SDValue Chain = I->getOperand(0);
-
- if (Chain.getNode()->getOpcode() != ISD::TokenFactor)
- continue;
-
- SDValue N1 = I->getOperand(1);
- SDValue N2 = I->getOperand(2);
- if ((N1.getValueType().isFloatingPoint() &&
- !N1.getValueType().isVector()) ||
- !N1.hasOneUse())
- continue;
-
- bool RModW = false;
- SDValue Load;
- unsigned Opcode = N1.getNode()->getOpcode();
- switch (Opcode) {
- case ISD::ADD:
- case ISD::MUL:
- case ISD::AND:
- case ISD::OR:
- case ISD::XOR:
- case ISD::ADDC:
- case ISD::ADDE:
- case ISD::VECTOR_SHUFFLE: {
- SDValue N10 = N1.getOperand(0);
- SDValue N11 = N1.getOperand(1);
- RModW = isRMWLoad(N10, Chain, N2, Load);
- if (!RModW)
- RModW = isRMWLoad(N11, Chain, N2, Load);
- break;
- }
- case ISD::SUB:
- case ISD::SHL:
- case ISD::SRA:
- case ISD::SRL:
- case ISD::ROTL:
- case ISD::ROTR:
- case ISD::SUBC:
- case ISD::SUBE:
- case X86ISD::SHLD:
- case X86ISD::SHRD: {
- SDValue N10 = N1.getOperand(0);
- RModW = isRMWLoad(N10, Chain, N2, Load);
- break;
- }
- }
-
- if (RModW) {
- MoveBelowTokenFactor(CurDAG, Load, SDValue(I, 0), Chain);
- ++NumLoadMoved;
- }
- }
-}
-
-
-/// PreprocessForFPConvert - Walk over the dag lowering fpround and fpextend
-/// nodes that target the FP stack to be store and load to the stack. This is a
-/// gross hack. We would like to simply mark these as being illegal, but when
-/// we do that, legalize produces these when it expands calls, then expands
-/// these in the same legalize pass. We would like dag combine to be able to
-/// hack on these between the call expansion and the node legalization. As such
-/// this pass basically does "really late" legalization of these inline with the
-/// X86 isel pass.
-void X86DAGToDAGISel::PreprocessForFPConvert() {
- for (SelectionDAG::allnodes_iterator I = CurDAG->allnodes_begin(),
- E = CurDAG->allnodes_end(); I != E; ) {
- SDNode *N = I++; // Preincrement iterator to avoid invalidation issues.
+
+ // Lower fpround and fpextend nodes that target the FP stack to be store and
+ // load to the stack. This is a gross hack. We would like to simply mark
+ // these as being illegal, but when we do that, legalize produces these when
+ // it expands calls, then expands these in the same legalize pass. We would
+ // like dag combine to be able to hack on these between the call expansion
+ // and the node legalization. As such this pass basically does "really
+ // late" legalization of these inline with the X86 isel pass.
+ // FIXME: This should only happen when not compiled with -O0.
if (N->getOpcode() != ISD::FP_ROUND && N->getOpcode() != ISD::FP_EXTEND)
continue;
// If the source and destination are SSE registers, then this is a legal
// conversion that should not be lowered.
- MVT SrcVT = N->getOperand(0).getValueType();
- MVT DstVT = N->getValueType(0);
+ EVT SrcVT = N->getOperand(0).getValueType();
+ EVT DstVT = N->getValueType(0);
bool SrcIsSSE = X86Lowering.isScalarFPTypeInSSEReg(SrcVT);
bool DstIsSSE = X86Lowering.isScalarFPTypeInSSEReg(DstVT);
if (SrcIsSSE && DstIsSSE)
// Here we could have an FP stack truncation or an FPStack <-> SSE convert.
// FPStack has extload and truncstore. SSE can fold direct loads into other
// operations. Based on this, decide what we want to do.
- MVT MemVT;
+ EVT MemVT;
if (N->getOpcode() == ISD::FP_ROUND)
MemVT = DstVT; // FP_ROUND must use DstVT, we can't do a 'trunc load'.
else
// FIXME: optimize the case where the src/dest is a load or store?
SDValue Store = CurDAG->getTruncStore(CurDAG->getEntryNode(), dl,
N->getOperand(0),
- MemTmp, NULL, 0, MemVT);
- SDValue Result = CurDAG->getExtLoad(ISD::EXTLOAD, dl, DstVT, Store, MemTmp,
- NULL, 0, MemVT);
+ MemTmp, NULL, 0, MemVT,
+ false, false, 0);
+ SDValue Result = CurDAG->getExtLoad(ISD::EXTLOAD, DstVT, dl, Store, MemTmp,
+ NULL, 0, MemVT, false, false, 0);
// We're about to replace all uses of the FP_ROUND/FP_EXTEND with the
// extload we created. This will cause general havok on the dag because
}
}
-/// InstructionSelectBasicBlock - This callback is invoked by SelectionDAGISel
-/// when it has created a SelectionDAG for us to codegen.
-void X86DAGToDAGISel::InstructionSelect() {
- CurBB = BB; // BB can change as result of isel.
- const Function *F = CurDAG->getMachineFunction().getFunction();
- OptForSize = F->hasFnAttr(Attribute::OptimizeForSize);
-
- DEBUG(BB->dump());
- if (!Fast)
- PreprocessForRMW();
-
- // FIXME: This should only happen when not -fast.
- PreprocessForFPConvert();
-
- // Codegen the basic block.
-#ifndef NDEBUG
- DOUT << "===== Instruction selection begins:\n";
- Indent = 0;
-#endif
- SelectRoot(*CurDAG);
-#ifndef NDEBUG
- DOUT << "===== Instruction selection ends:\n";
-#endif
-
- CurDAG->RemoveDeadNodes();
-}
/// EmitSpecialCodeForMain - Emit any code that needs to be executed only in
/// the main function.
MachineFrameInfo *MFI) {
const TargetInstrInfo *TII = TM.getInstrInfo();
if (Subtarget->isTargetCygMing())
- BuildMI(BB, DebugLoc::getUnknownLoc(),
+ BuildMI(BB, DebugLoc(),
TII->get(X86::CALLpcrel32)).addExternalSymbol("__main");
}
-void X86DAGToDAGISel::EmitFunctionEntryCode(Function &Fn, MachineFunction &MF) {
+void X86DAGToDAGISel::EmitFunctionEntryCode() {
// If this is main, emit special code for main.
- MachineBasicBlock *BB = MF.begin();
- if (Fn.hasExternalLinkage() && Fn.getName() == "main")
- EmitSpecialCodeForMain(BB, MF.getFrameInfo());
+ if (const Function *Fn = MF->getFunction())
+ if (Fn->hasExternalLinkage() && Fn->getName() == "main")
+ EmitSpecialCodeForMain(MF->begin(), MF->getFrameInfo());
}
return true;
}
+/// MatchWrapper - Try to match X86ISD::Wrapper and X86ISD::WrapperRIP nodes
+/// into an addressing mode. These wrap things that will resolve down into a
+/// symbol reference. If no match is possible, this returns true, otherwise it
+/// returns false.
bool X86DAGToDAGISel::MatchWrapper(SDValue N, X86ISelAddressMode &AM) {
- bool is64Bit = Subtarget->is64Bit();
- DOUT << "Wrapper: 64bit " << is64Bit;
- DOUT << " AM "; DEBUG(AM.dump()); DOUT << "\n";
-
- // Under X86-64 non-small code model, GV (and friends) are 64-bits.
- if (is64Bit && (TM.getCodeModel() != CodeModel::Small))
- return true;
-
- // Base and index reg must be 0 in order to use rip as base.
- bool canUsePICRel = !AM.Base.Reg.getNode() && !AM.IndexReg.getNode();
- if (is64Bit && !canUsePICRel && TM.symbolicAddressesAreRIPRel())
- return true;
-
+ // If the addressing mode already has a symbol as the displacement, we can
+ // never match another symbol.
if (AM.hasSymbolicDisplacement())
return true;
- // If value is available in a register both base and index components have
- // been picked, we can't fit the result available in the register in the
- // addressing mode. Duplicate GlobalAddress or ConstantPool as displacement.
SDValue N0 = N.getOperand(0);
- if (GlobalAddressSDNode *G = dyn_cast<GlobalAddressSDNode>(N0)) {
- uint64_t Offset = G->getOffset();
- if (!is64Bit || isInt32(AM.Disp + Offset)) {
- GlobalValue *GV = G->getGlobal();
- bool isRIPRel = TM.symbolicAddressesAreRIPRel();
- if (N0.getOpcode() == llvm::ISD::TargetGlobalTLSAddress) {
- TLSModel::Model model =
- getTLSModel (GV, TM.getRelocationModel());
- if (is64Bit && model == TLSModel::InitialExec)
- isRIPRel = true;
- }
- AM.GV = GV;
- AM.Disp += Offset;
- AM.isRIPRel = isRIPRel;
- return false;
- }
- } else if (ConstantPoolSDNode *CP = dyn_cast<ConstantPoolSDNode>(N0)) {
- uint64_t Offset = CP->getOffset();
- if (!is64Bit || isInt32(AM.Disp + Offset)) {
+ CodeModel::Model M = TM.getCodeModel();
+
+ // Handle X86-64 rip-relative addresses. We check this before checking direct
+ // folding because RIP is preferable to non-RIP accesses.
+ if (Subtarget->is64Bit() &&
+ // Under X86-64 non-small code model, GV (and friends) are 64-bits, so
+ // they cannot be folded into immediate fields.
+ // FIXME: This can be improved for kernel and other models?
+ (M == CodeModel::Small || M == CodeModel::Kernel) &&
+ // Base and index reg must be 0 in order to use %rip as base and lowering
+ // must allow RIP.
+ !AM.hasBaseOrIndexReg() && N.getOpcode() == X86ISD::WrapperRIP) {
+ if (GlobalAddressSDNode *G = dyn_cast<GlobalAddressSDNode>(N0)) {
+ int64_t Offset = AM.Disp + G->getOffset();
+ if (!X86::isOffsetSuitableForCodeModel(Offset, M)) return true;
+ AM.GV = G->getGlobal();
+ AM.Disp = Offset;
+ AM.SymbolFlags = G->getTargetFlags();
+ } else if (ConstantPoolSDNode *CP = dyn_cast<ConstantPoolSDNode>(N0)) {
+ int64_t Offset = AM.Disp + CP->getOffset();
+ if (!X86::isOffsetSuitableForCodeModel(Offset, M)) return true;
AM.CP = CP->getConstVal();
AM.Align = CP->getAlignment();
- AM.Disp += Offset;
- AM.isRIPRel = TM.symbolicAddressesAreRIPRel();
- return false;
+ AM.Disp = Offset;
+ AM.SymbolFlags = CP->getTargetFlags();
+ } else if (ExternalSymbolSDNode *S = dyn_cast<ExternalSymbolSDNode>(N0)) {
+ AM.ES = S->getSymbol();
+ AM.SymbolFlags = S->getTargetFlags();
+ } else if (JumpTableSDNode *J = dyn_cast<JumpTableSDNode>(N0)) {
+ AM.JT = J->getIndex();
+ AM.SymbolFlags = J->getTargetFlags();
+ } else {
+ AM.BlockAddr = cast<BlockAddressSDNode>(N0)->getBlockAddress();
+ AM.SymbolFlags = cast<BlockAddressSDNode>(N0)->getTargetFlags();
}
- } else if (ExternalSymbolSDNode *S =dyn_cast<ExternalSymbolSDNode>(N0)) {
- AM.ES = S->getSymbol();
- AM.isRIPRel = TM.symbolicAddressesAreRIPRel();
+
+ if (N.getOpcode() == X86ISD::WrapperRIP)
+ AM.setBaseReg(CurDAG->getRegister(X86::RIP, MVT::i64));
return false;
- } else if (JumpTableSDNode *J = dyn_cast<JumpTableSDNode>(N0)) {
- AM.JT = J->getIndex();
- AM.isRIPRel = TM.symbolicAddressesAreRIPRel();
+ }
+
+ // Handle the case when globals fit in our immediate field: This is true for
+ // X86-32 always and X86-64 when in -static -mcmodel=small mode. In 64-bit
+ // mode, this results in a non-RIP-relative computation.
+ if (!Subtarget->is64Bit() ||
+ ((M == CodeModel::Small || M == CodeModel::Kernel) &&
+ TM.getRelocationModel() == Reloc::Static)) {
+ if (GlobalAddressSDNode *G = dyn_cast<GlobalAddressSDNode>(N0)) {
+ AM.GV = G->getGlobal();
+ AM.Disp += G->getOffset();
+ AM.SymbolFlags = G->getTargetFlags();
+ } else if (ConstantPoolSDNode *CP = dyn_cast<ConstantPoolSDNode>(N0)) {
+ AM.CP = CP->getConstVal();
+ AM.Align = CP->getAlignment();
+ AM.Disp += CP->getOffset();
+ AM.SymbolFlags = CP->getTargetFlags();
+ } else if (ExternalSymbolSDNode *S = dyn_cast<ExternalSymbolSDNode>(N0)) {
+ AM.ES = S->getSymbol();
+ AM.SymbolFlags = S->getTargetFlags();
+ } else if (JumpTableSDNode *J = dyn_cast<JumpTableSDNode>(N0)) {
+ AM.JT = J->getIndex();
+ AM.SymbolFlags = J->getTargetFlags();
+ } else {
+ AM.BlockAddr = cast<BlockAddressSDNode>(N0)->getBlockAddress();
+ AM.SymbolFlags = cast<BlockAddressSDNode>(N0)->getTargetFlags();
+ }
return false;
}
/// MatchAddress - Add the specified node to the specified addressing mode,
/// returning true if it cannot be done. This just pattern matches for the
/// addressing mode.
-bool X86DAGToDAGISel::MatchAddress(SDValue N, X86ISelAddressMode &AM,
- unsigned Depth) {
+bool X86DAGToDAGISel::MatchAddress(SDValue N, X86ISelAddressMode &AM) {
+ if (MatchAddressRecursively(N, AM, 0))
+ return true;
+
+ // Post-processing: Convert lea(,%reg,2) to lea(%reg,%reg), which has
+ // a smaller encoding and avoids a scaled-index.
+ if (AM.Scale == 2 &&
+ AM.BaseType == X86ISelAddressMode::RegBase &&
+ AM.Base_Reg.getNode() == 0) {
+ AM.Base_Reg = AM.IndexReg;
+ AM.Scale = 1;
+ }
+
+ // Post-processing: Convert foo to foo(%rip), even in non-PIC mode,
+ // because it has a smaller encoding.
+ // TODO: Which other code models can use this?
+ if (TM.getCodeModel() == CodeModel::Small &&
+ Subtarget->is64Bit() &&
+ AM.Scale == 1 &&
+ AM.BaseType == X86ISelAddressMode::RegBase &&
+ AM.Base_Reg.getNode() == 0 &&
+ AM.IndexReg.getNode() == 0 &&
+ AM.SymbolFlags == X86II::MO_NO_FLAG &&
+ AM.hasSymbolicDisplacement())
+ AM.Base_Reg = CurDAG->getRegister(X86::RIP, MVT::i64);
+
+ return false;
+}
+
+/// isLogicallyAddWithConstant - Return true if this node is semantically an
+/// add of a value with a constantint.
+static bool isLogicallyAddWithConstant(SDValue V, SelectionDAG *CurDAG) {
+ // Check for (add x, Cst)
+ if (V->getOpcode() == ISD::ADD)
+ return isa<ConstantSDNode>(V->getOperand(1));
+
+ // Check for (or x, Cst), where Cst & x == 0.
+ if (V->getOpcode() != ISD::OR ||
+ !isa<ConstantSDNode>(V->getOperand(1)))
+ return false;
+
+ // Handle "X | C" as "X + C" iff X is known to have C bits clear.
+ ConstantSDNode *CN = cast<ConstantSDNode>(V->getOperand(1));
+
+ // Check to see if the LHS & C is zero.
+ return CurDAG->MaskedValueIsZero(V->getOperand(0), CN->getAPIntValue());
+}
+
+bool X86DAGToDAGISel::MatchAddressRecursively(SDValue N, X86ISelAddressMode &AM,
+ unsigned Depth) {
bool is64Bit = Subtarget->is64Bit();
DebugLoc dl = N.getDebugLoc();
- DOUT << "MatchAddress: "; DEBUG(AM.dump());
+ DEBUG({
+ dbgs() << "MatchAddress: ";
+ AM.dump();
+ });
// Limit recursion.
if (Depth > 5)
return MatchAddressBase(N, AM);
-
+
+ CodeModel::Model M = TM.getCodeModel();
+
+ // If this is already a %rip relative address, we can only merge immediates
+ // into it. Instead of handling this in every case, we handle it here.
// RIP relative addressing: %rip + 32-bit displacement!
- if (AM.isRIPRel) {
- if (!AM.ES && AM.JT != -1 && N.getOpcode() == ISD::Constant) {
- uint64_t Val = cast<ConstantSDNode>(N)->getSExtValue();
- if (!is64Bit || isInt32(AM.Disp + Val)) {
- AM.Disp += Val;
+ if (AM.isRIPRelative()) {
+ // FIXME: JumpTable and ExternalSymbol address currently don't like
+ // displacements. It isn't very important, but this should be fixed for
+ // consistency.
+ if (!AM.ES && AM.JT != -1) return true;
+
+ if (ConstantSDNode *Cst = dyn_cast<ConstantSDNode>(N)) {
+ int64_t Val = AM.Disp + Cst->getSExtValue();
+ if (X86::isOffsetSuitableForCodeModel(Val, M,
+ AM.hasSymbolicDisplacement())) {
+ AM.Disp = Val;
return false;
}
}
default: break;
case ISD::Constant: {
uint64_t Val = cast<ConstantSDNode>(N)->getSExtValue();
- if (!is64Bit || isInt32(AM.Disp + Val)) {
+ if (!is64Bit ||
+ X86::isOffsetSuitableForCodeModel(AM.Disp + Val, M,
+ AM.hasSymbolicDisplacement())) {
AM.Disp += Val;
return false;
}
break;
case X86ISD::Wrapper:
+ case X86ISD::WrapperRIP:
if (!MatchWrapper(N, AM))
return false;
break;
case ISD::FrameIndex:
if (AM.BaseType == X86ISelAddressMode::RegBase
- && AM.Base.Reg.getNode() == 0) {
+ && AM.Base_Reg.getNode() == 0) {
AM.BaseType = X86ISelAddressMode::FrameIndexBase;
- AM.Base.FrameIndex = cast<FrameIndexSDNode>(N)->getIndex();
+ AM.Base_FrameIndex = cast<FrameIndexSDNode>(N)->getIndex();
return false;
}
break;
case ISD::SHL:
- if (AM.IndexReg.getNode() != 0 || AM.Scale != 1 || AM.isRIPRel)
+ if (AM.IndexReg.getNode() != 0 || AM.Scale != 1)
break;
if (ConstantSDNode
*CN = dyn_cast<ConstantSDNode>(N.getNode()->getOperand(1))) {
unsigned Val = CN->getZExtValue();
+ // Note that we handle x<<1 as (,x,2) rather than (x,x) here so
+ // that the base operand remains free for further matching. If
+ // the base doesn't end up getting used, a post-processing step
+ // in MatchAddress turns (,x,2) into (x,x), which is cheaper.
if (Val == 1 || Val == 2 || Val == 3) {
AM.Scale = 1 << Val;
SDValue ShVal = N.getNode()->getOperand(0);
// Okay, we know that we have a scale by now. However, if the scaled
// value is an add of something and a constant, we can fold the
// constant into the disp field here.
- if (ShVal.getNode()->getOpcode() == ISD::ADD && ShVal.hasOneUse() &&
- isa<ConstantSDNode>(ShVal.getNode()->getOperand(1))) {
+ if (isLogicallyAddWithConstant(ShVal, CurDAG)) {
AM.IndexReg = ShVal.getNode()->getOperand(0);
ConstantSDNode *AddVal =
cast<ConstantSDNode>(ShVal.getNode()->getOperand(1));
uint64_t Disp = AM.Disp + (AddVal->getSExtValue() << Val);
- if (!is64Bit || isInt32(Disp))
+ if (!is64Bit ||
+ X86::isOffsetSuitableForCodeModel(Disp, M,
+ AM.hasSymbolicDisplacement()))
AM.Disp = Disp;
else
AM.IndexReg = ShVal;
case X86ISD::MUL_IMM:
// X*[3,5,9] -> X+X*[2,4,8]
if (AM.BaseType == X86ISelAddressMode::RegBase &&
- AM.Base.Reg.getNode() == 0 &&
- AM.IndexReg.getNode() == 0 &&
- !AM.isRIPRel) {
+ AM.Base_Reg.getNode() == 0 &&
+ AM.IndexReg.getNode() == 0) {
if (ConstantSDNode
*CN = dyn_cast<ConstantSDNode>(N.getNode()->getOperand(1)))
if (CN->getZExtValue() == 3 || CN->getZExtValue() == 5 ||
cast<ConstantSDNode>(MulVal.getNode()->getOperand(1));
uint64_t Disp = AM.Disp + AddVal->getSExtValue() *
CN->getZExtValue();
- if (!is64Bit || isInt32(Disp))
+ if (!is64Bit ||
+ X86::isOffsetSuitableForCodeModel(Disp, M,
+ AM.hasSymbolicDisplacement()))
AM.Disp = Disp;
else
Reg = N.getNode()->getOperand(0);
Reg = N.getNode()->getOperand(0);
}
- AM.IndexReg = AM.Base.Reg = Reg;
+ AM.IndexReg = AM.Base_Reg = Reg;
return false;
}
}
break;
+ case ISD::SUB: {
+ // Given A-B, if A can be completely folded into the address and
+ // the index field with the index field unused, use -B as the index.
+ // This is a win if a has multiple parts that can be folded into
+ // the address. Also, this saves a mov if the base register has
+ // other uses, since it avoids a two-address sub instruction, however
+ // it costs an additional mov if the index register has other uses.
+
+ // Add an artificial use to this node so that we can keep track of
+ // it if it gets CSE'd with a different node.
+ HandleSDNode Handle(N);
+
+ // Test if the LHS of the sub can be folded.
+ X86ISelAddressMode Backup = AM;
+ if (MatchAddressRecursively(N.getNode()->getOperand(0), AM, Depth+1)) {
+ AM = Backup;
+ break;
+ }
+ // Test if the index field is free for use.
+ if (AM.IndexReg.getNode() || AM.isRIPRelative()) {
+ AM = Backup;
+ break;
+ }
+
+ int Cost = 0;
+ SDValue RHS = Handle.getValue().getNode()->getOperand(1);
+ // If the RHS involves a register with multiple uses, this
+ // transformation incurs an extra mov, due to the neg instruction
+ // clobbering its operand.
+ if (!RHS.getNode()->hasOneUse() ||
+ RHS.getNode()->getOpcode() == ISD::CopyFromReg ||
+ RHS.getNode()->getOpcode() == ISD::TRUNCATE ||
+ RHS.getNode()->getOpcode() == ISD::ANY_EXTEND ||
+ (RHS.getNode()->getOpcode() == ISD::ZERO_EXTEND &&
+ RHS.getNode()->getOperand(0).getValueType() == MVT::i32))
+ ++Cost;
+ // If the base is a register with multiple uses, this
+ // transformation may save a mov.
+ if ((AM.BaseType == X86ISelAddressMode::RegBase &&
+ AM.Base_Reg.getNode() &&
+ !AM.Base_Reg.getNode()->hasOneUse()) ||
+ AM.BaseType == X86ISelAddressMode::FrameIndexBase)
+ --Cost;
+ // If the folded LHS was interesting, this transformation saves
+ // address arithmetic.
+ if ((AM.hasSymbolicDisplacement() && !Backup.hasSymbolicDisplacement()) +
+ ((AM.Disp != 0) && (Backup.Disp == 0)) +
+ (AM.Segment.getNode() && !Backup.Segment.getNode()) >= 2)
+ --Cost;
+ // If it doesn't look like it may be an overall win, don't do it.
+ if (Cost >= 0) {
+ AM = Backup;
+ break;
+ }
+
+ // Ok, the transformation is legal and appears profitable. Go for it.
+ SDValue Zero = CurDAG->getConstant(0, N.getValueType());
+ SDValue Neg = CurDAG->getNode(ISD::SUB, dl, N.getValueType(), Zero, RHS);
+ AM.IndexReg = Neg;
+ AM.Scale = 1;
+
+ // Insert the new nodes into the topological ordering.
+ if (Zero.getNode()->getNodeId() == -1 ||
+ Zero.getNode()->getNodeId() > N.getNode()->getNodeId()) {
+ CurDAG->RepositionNode(N.getNode(), Zero.getNode());
+ Zero.getNode()->setNodeId(N.getNode()->getNodeId());
+ }
+ if (Neg.getNode()->getNodeId() == -1 ||
+ Neg.getNode()->getNodeId() > N.getNode()->getNodeId()) {
+ CurDAG->RepositionNode(N.getNode(), Neg.getNode());
+ Neg.getNode()->setNodeId(N.getNode()->getNodeId());
+ }
+ return false;
+ }
+
case ISD::ADD: {
+ // Add an artificial use to this node so that we can keep track of
+ // it if it gets CSE'd with a different node.
+ HandleSDNode Handle(N);
+ SDValue LHS = Handle.getValue().getNode()->getOperand(0);
+ SDValue RHS = Handle.getValue().getNode()->getOperand(1);
+
X86ISelAddressMode Backup = AM;
- if (!MatchAddress(N.getNode()->getOperand(0), AM, Depth+1) &&
- !MatchAddress(N.getNode()->getOperand(1), AM, Depth+1))
+ if (!MatchAddressRecursively(LHS, AM, Depth+1) &&
+ !MatchAddressRecursively(RHS, AM, Depth+1))
return false;
AM = Backup;
- if (!MatchAddress(N.getNode()->getOperand(1), AM, Depth+1) &&
- !MatchAddress(N.getNode()->getOperand(0), AM, Depth+1))
+ LHS = Handle.getValue().getNode()->getOperand(0);
+ RHS = Handle.getValue().getNode()->getOperand(1);
+
+ // Try again after commuting the operands.
+ if (!MatchAddressRecursively(RHS, AM, Depth+1) &&
+ !MatchAddressRecursively(LHS, AM, Depth+1))
return false;
AM = Backup;
+ LHS = Handle.getValue().getNode()->getOperand(0);
+ RHS = Handle.getValue().getNode()->getOperand(1);
// If we couldn't fold both operands into the address at the same time,
// see if we can just put each operand into a register and fold at least
// the add.
if (AM.BaseType == X86ISelAddressMode::RegBase &&
- !AM.Base.Reg.getNode() &&
- !AM.IndexReg.getNode() &&
- !AM.isRIPRel) {
- AM.Base.Reg = N.getNode()->getOperand(0);
- AM.IndexReg = N.getNode()->getOperand(1);
+ !AM.Base_Reg.getNode() &&
+ !AM.IndexReg.getNode()) {
+ AM.Base_Reg = LHS;
+ AM.IndexReg = RHS;
AM.Scale = 1;
return false;
}
case ISD::OR:
// Handle "X | C" as "X + C" iff X is known to have C bits clear.
- if (ConstantSDNode *CN = dyn_cast<ConstantSDNode>(N.getOperand(1))) {
+ if (isLogicallyAddWithConstant(N, CurDAG)) {
X86ISelAddressMode Backup = AM;
+ ConstantSDNode *CN = cast<ConstantSDNode>(N.getOperand(1));
uint64_t Offset = CN->getSExtValue();
+
// Start with the LHS as an addr mode.
- if (!MatchAddress(N.getOperand(0), AM, Depth+1) &&
+ if (!MatchAddressRecursively(N.getOperand(0), AM, Depth+1) &&
// Address could not have picked a GV address for the displacement.
AM.GV == NULL &&
// On x86-64, the resultant disp must fit in 32-bits.
- (!is64Bit || isInt32(AM.Disp + Offset)) &&
- // Check to see if the LHS & C is zero.
- CurDAG->MaskedValueIsZero(N.getOperand(0), CN->getAPIntValue())) {
+ (!is64Bit ||
+ X86::isOffsetSuitableForCodeModel(AM.Disp + Offset, M,
+ AM.hasSymbolicDisplacement()))) {
AM.Disp += Offset;
return false;
}
// Scale must not be used already.
if (AM.IndexReg.getNode() != 0 || AM.Scale != 1) break;
- // Not when RIP is used as the base.
- if (AM.isRIPRel) break;
-
SDValue X = Shift.getOperand(0);
ConstantSDNode *C2 = dyn_cast<ConstantSDNode>(N.getOperand(1));
ConstantSDNode *C1 = dyn_cast<ConstantSDNode>(Shift.getOperand(1));
// a scaled index.
if (Shift.getOpcode() == ISD::SRL && Shift.hasOneUse()) {
unsigned ScaleLog = 8 - C1->getZExtValue();
- if (ScaleLog > 0 && ScaleLog < 64 &&
+ if (ScaleLog > 0 && ScaleLog < 4 &&
C2->getZExtValue() == (UINT64_C(0xff) << ScaleLog)) {
SDValue Eight = CurDAG->getConstant(8, MVT::i8);
SDValue Mask = CurDAG->getConstant(0xff, N.getValueType());
/// specified addressing mode without any further recursion.
bool X86DAGToDAGISel::MatchAddressBase(SDValue N, X86ISelAddressMode &AM) {
// Is the base register already occupied?
- if (AM.BaseType != X86ISelAddressMode::RegBase || AM.Base.Reg.getNode()) {
+ if (AM.BaseType != X86ISelAddressMode::RegBase || AM.Base_Reg.getNode()) {
// If so, check to see if the scale index register is set.
- if (AM.IndexReg.getNode() == 0 && !AM.isRIPRel) {
+ if (AM.IndexReg.getNode() == 0) {
AM.IndexReg = N;
AM.Scale = 1;
return false;
// Default, generate it as a register.
AM.BaseType = X86ISelAddressMode::RegBase;
- AM.Base.Reg = N;
+ AM.Base_Reg = N;
return false;
}
/// SelectAddr - returns true if it is able pattern match an addressing mode.
/// It returns the operands which make up the maximal addressing mode it can
/// match by reference.
-bool X86DAGToDAGISel::SelectAddr(SDValue Op, SDValue N, SDValue &Base,
+bool X86DAGToDAGISel::SelectAddr(SDNode *Op, SDValue N, SDValue &Base,
SDValue &Scale, SDValue &Index,
SDValue &Disp, SDValue &Segment) {
X86ISelAddressMode AM;
- bool Done = false;
- if (AvoidDupAddrCompute && !N.hasOneUse()) {
- unsigned Opcode = N.getOpcode();
- if (Opcode != ISD::Constant && Opcode != ISD::FrameIndex &&
- Opcode != X86ISD::Wrapper) {
- // If we are able to fold N into addressing mode, then we'll allow it even
- // if N has multiple uses. In general, addressing computation is used as
- // addresses by all of its uses. But watch out for CopyToReg uses, that
- // means the address computation is liveout. It will be computed by a LEA
- // so we want to avoid computing the address twice.
- for (SDNode::use_iterator UI = N.getNode()->use_begin(),
- UE = N.getNode()->use_end(); UI != UE; ++UI) {
- if (UI->getOpcode() == ISD::CopyToReg) {
- MatchAddressBase(N, AM);
- Done = true;
- break;
- }
- }
- }
- }
-
- if (!Done && MatchAddress(N, AM))
+ if (MatchAddress(N, AM))
return false;
- MVT VT = N.getValueType();
+ EVT VT = N.getValueType();
if (AM.BaseType == X86ISelAddressMode::RegBase) {
- if (!AM.Base.Reg.getNode())
- AM.Base.Reg = CurDAG->getRegister(0, VT);
+ if (!AM.Base_Reg.getNode())
+ AM.Base_Reg = CurDAG->getRegister(0, VT);
}
if (!AM.IndexReg.getNode())
/// SelectScalarSSELoad - Match a scalar SSE load. In particular, we want to
/// match a load whose top elements are either undef or zeros. The load flavor
/// is derived from the type of N, which is either v4f32 or v2f64.
-bool X86DAGToDAGISel::SelectScalarSSELoad(SDValue Op, SDValue Pred,
+///
+/// We also return:
+/// PatternChainNode: this is the matched node that has a chain input and
+/// output.
+bool X86DAGToDAGISel::SelectScalarSSELoad(SDNode *Root,
SDValue N, SDValue &Base,
SDValue &Scale, SDValue &Index,
SDValue &Disp, SDValue &Segment,
- SDValue &InChain,
- SDValue &OutChain) {
+ SDValue &PatternNodeWithChain) {
if (N.getOpcode() == ISD::SCALAR_TO_VECTOR) {
- InChain = N.getOperand(0).getValue(1);
- if (ISD::isNON_EXTLoad(InChain.getNode()) &&
- InChain.getValue(0).hasOneUse() &&
- N.hasOneUse() &&
- IsLegalAndProfitableToFold(N.getNode(), Pred.getNode(), Op.getNode())) {
- LoadSDNode *LD = cast<LoadSDNode>(InChain);
- if (!SelectAddr(Op, LD->getBasePtr(), Base, Scale, Index, Disp, Segment))
+ PatternNodeWithChain = N.getOperand(0);
+ if (ISD::isNON_EXTLoad(PatternNodeWithChain.getNode()) &&
+ PatternNodeWithChain.hasOneUse() &&
+ IsProfitableToFold(N.getOperand(0), N.getNode(), Root) &&
+ IsLegalToFold(N.getOperand(0), N.getNode(), Root, OptLevel)) {
+ LoadSDNode *LD = cast<LoadSDNode>(PatternNodeWithChain);
+ if (!SelectAddr(Root, LD->getBasePtr(), Base, Scale, Index, Disp,Segment))
return false;
- OutChain = LD->getChain();
return true;
}
}
N.getOperand(0).getOpcode() == ISD::SCALAR_TO_VECTOR &&
N.getOperand(0).getNode()->hasOneUse() &&
ISD::isNON_EXTLoad(N.getOperand(0).getOperand(0).getNode()) &&
- N.getOperand(0).getOperand(0).hasOneUse()) {
+ N.getOperand(0).getOperand(0).hasOneUse() &&
+ IsProfitableToFold(N.getOperand(0), N.getNode(), Root) &&
+ IsLegalToFold(N.getOperand(0), N.getNode(), Root, OptLevel)) {
// Okay, this is a zero extending load. Fold it.
LoadSDNode *LD = cast<LoadSDNode>(N.getOperand(0).getOperand(0));
- if (!SelectAddr(Op, LD->getBasePtr(), Base, Scale, Index, Disp, Segment))
+ if (!SelectAddr(Root, LD->getBasePtr(), Base, Scale, Index, Disp, Segment))
return false;
- OutChain = LD->getChain();
- InChain = SDValue(LD, 1);
+ PatternNodeWithChain = SDValue(LD, 0);
return true;
}
return false;
/// SelectLEAAddr - it calls SelectAddr and determines if the maximal addressing
/// mode it matches can be cost effectively emitted as an LEA instruction.
-bool X86DAGToDAGISel::SelectLEAAddr(SDValue Op, SDValue N,
+bool X86DAGToDAGISel::SelectLEAAddr(SDNode *Op, SDValue N,
SDValue &Base, SDValue &Scale,
- SDValue &Index, SDValue &Disp) {
+ SDValue &Index, SDValue &Disp,
+ SDValue &Segment) {
X86ISelAddressMode AM;
// Set AM.Segment to prevent MatchAddress from using one. LEA doesn't support
assert (T == AM.Segment);
AM.Segment = Copy;
- MVT VT = N.getValueType();
+ EVT VT = N.getValueType();
unsigned Complexity = 0;
if (AM.BaseType == X86ISelAddressMode::RegBase)
- if (AM.Base.Reg.getNode())
+ if (AM.Base_Reg.getNode())
Complexity = 1;
else
- AM.Base.Reg = CurDAG->getRegister(0, VT);
+ AM.Base_Reg = CurDAG->getRegister(0, VT);
else if (AM.BaseType == X86ISelAddressMode::FrameIndexBase)
Complexity = 4;
Complexity += 2;
}
- if (AM.Disp && (AM.Base.Reg.getNode() || AM.IndexReg.getNode()))
+ if (AM.Disp && (AM.Base_Reg.getNode() || AM.IndexReg.getNode()))
Complexity++;
- if (Complexity > 2) {
- SDValue Segment;
- getAddressOperands(AM, Base, Scale, Index, Disp, Segment);
- return true;
+ // If it isn't worth using an LEA, reject it.
+ if (Complexity <= 2)
+ return false;
+
+ getAddressOperands(AM, Base, Scale, Index, Disp, Segment);
+ return true;
+}
+
+/// SelectTLSADDRAddr - This is only run on TargetGlobalTLSAddress nodes.
+bool X86DAGToDAGISel::SelectTLSADDRAddr(SDNode *Op, SDValue N, SDValue &Base,
+ SDValue &Scale, SDValue &Index,
+ SDValue &Disp, SDValue &Segment) {
+ assert(N.getOpcode() == ISD::TargetGlobalTLSAddress);
+ const GlobalAddressSDNode *GA = cast<GlobalAddressSDNode>(N);
+
+ X86ISelAddressMode AM;
+ AM.GV = GA->getGlobal();
+ AM.Disp += GA->getOffset();
+ AM.Base_Reg = CurDAG->getRegister(0, N.getValueType());
+ AM.SymbolFlags = GA->getTargetFlags();
+
+ if (N.getValueType() == MVT::i32) {
+ AM.Scale = 1;
+ AM.IndexReg = CurDAG->getRegister(X86::EBX, MVT::i32);
+ } else {
+ AM.IndexReg = CurDAG->getRegister(0, MVT::i64);
}
- return false;
+
+ getAddressOperands(AM, Base, Scale, Index, Disp, Segment);
+ return true;
}
-bool X86DAGToDAGISel::TryFoldLoad(SDValue P, SDValue N,
+
+bool X86DAGToDAGISel::TryFoldLoad(SDNode *P, SDValue N,
SDValue &Base, SDValue &Scale,
SDValue &Index, SDValue &Disp,
SDValue &Segment) {
- if (ISD::isNON_EXTLoad(N.getNode()) &&
- N.hasOneUse() &&
- IsLegalAndProfitableToFold(N.getNode(), P.getNode(), P.getNode()))
- return SelectAddr(P, N.getOperand(1), Base, Scale, Index, Disp, Segment);
- return false;
+ if (!ISD::isNON_EXTLoad(N.getNode()) ||
+ !IsProfitableToFold(N, P, P) ||
+ !IsLegalToFold(N, P, P, OptLevel))
+ return false;
+
+ return SelectAddr(P, N.getOperand(1), Base, Scale, Index, Disp, Segment);
}
/// getGlobalBaseReg - Return an SDNode that returns the value of
/// initialize the global base register, if necessary.
///
SDNode *X86DAGToDAGISel::getGlobalBaseReg() {
- MachineFunction *MF = CurBB->getParent();
- unsigned GlobalBaseReg = TM.getInstrInfo()->getGlobalBaseReg(MF);
+ unsigned GlobalBaseReg = getInstrInfo()->getGlobalBaseReg(MF);
return CurDAG->getRegister(GlobalBaseReg, TLI.getPointerTy()).getNode();
}
SDValue In2L = Node->getOperand(2);
SDValue In2H = Node->getOperand(3);
SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4;
- if (!SelectAddr(In1, In1, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4))
+ if (!SelectAddr(In1.getNode(), In1, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4))
return NULL;
- SDValue LSI = Node->getOperand(4); // MemOperand
- const SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, In2L, In2H, LSI, Chain};
- return CurDAG->getTargetNode(Opc, Node->getDebugLoc(),
- MVT::i32, MVT::i32, MVT::Other, Ops,
- array_lengthof(Ops));
+ MachineSDNode::mmo_iterator MemOp = MF->allocateMemRefsArray(1);
+ MemOp[0] = cast<MemSDNode>(Node)->getMemOperand();
+ const SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, In2L, In2H, Chain};
+ SDNode *ResNode = CurDAG->getMachineNode(Opc, Node->getDebugLoc(),
+ MVT::i32, MVT::i32, MVT::Other, Ops,
+ array_lengthof(Ops));
+ cast<MachineSDNode>(ResNode)->setMemRefs(MemOp, MemOp + 1);
+ return ResNode;
}
-SDNode *X86DAGToDAGISel::Select(SDValue N) {
- SDNode *Node = N.getNode();
- MVT NVT = Node->getValueType(0);
+SDNode *X86DAGToDAGISel::SelectAtomicLoadAdd(SDNode *Node, EVT NVT) {
+ if (Node->hasAnyUseOfValue(0))
+ return 0;
+
+ // Optimize common patterns for __sync_add_and_fetch and
+ // __sync_sub_and_fetch where the result is not used. This allows us
+ // to use "lock" version of add, sub, inc, dec instructions.
+ // FIXME: Do not use special instructions but instead add the "lock"
+ // prefix to the target node somehow. The extra information will then be
+ // transferred to machine instruction and it denotes the prefix.
+ SDValue Chain = Node->getOperand(0);
+ SDValue Ptr = Node->getOperand(1);
+ SDValue Val = Node->getOperand(2);
+ SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4;
+ if (!SelectAddr(Ptr.getNode(), Ptr, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4))
+ return 0;
+
+ bool isInc = false, isDec = false, isSub = false, isCN = false;
+ ConstantSDNode *CN = dyn_cast<ConstantSDNode>(Val);
+ if (CN) {
+ isCN = true;
+ int64_t CNVal = CN->getSExtValue();
+ if (CNVal == 1)
+ isInc = true;
+ else if (CNVal == -1)
+ isDec = true;
+ else if (CNVal >= 0)
+ Val = CurDAG->getTargetConstant(CNVal, NVT);
+ else {
+ isSub = true;
+ Val = CurDAG->getTargetConstant(-CNVal, NVT);
+ }
+ } else if (Val.hasOneUse() &&
+ Val.getOpcode() == ISD::SUB &&
+ X86::isZeroNode(Val.getOperand(0))) {
+ isSub = true;
+ Val = Val.getOperand(1);
+ }
+
+ unsigned Opc = 0;
+ switch (NVT.getSimpleVT().SimpleTy) {
+ default: return 0;
+ case MVT::i8:
+ if (isInc)
+ Opc = X86::LOCK_INC8m;
+ else if (isDec)
+ Opc = X86::LOCK_DEC8m;
+ else if (isSub) {
+ if (isCN)
+ Opc = X86::LOCK_SUB8mi;
+ else
+ Opc = X86::LOCK_SUB8mr;
+ } else {
+ if (isCN)
+ Opc = X86::LOCK_ADD8mi;
+ else
+ Opc = X86::LOCK_ADD8mr;
+ }
+ break;
+ case MVT::i16:
+ if (isInc)
+ Opc = X86::LOCK_INC16m;
+ else if (isDec)
+ Opc = X86::LOCK_DEC16m;
+ else if (isSub) {
+ if (isCN) {
+ if (Predicate_immSext8(Val.getNode()))
+ Opc = X86::LOCK_SUB16mi8;
+ else
+ Opc = X86::LOCK_SUB16mi;
+ } else
+ Opc = X86::LOCK_SUB16mr;
+ } else {
+ if (isCN) {
+ if (Predicate_immSext8(Val.getNode()))
+ Opc = X86::LOCK_ADD16mi8;
+ else
+ Opc = X86::LOCK_ADD16mi;
+ } else
+ Opc = X86::LOCK_ADD16mr;
+ }
+ break;
+ case MVT::i32:
+ if (isInc)
+ Opc = X86::LOCK_INC32m;
+ else if (isDec)
+ Opc = X86::LOCK_DEC32m;
+ else if (isSub) {
+ if (isCN) {
+ if (Predicate_immSext8(Val.getNode()))
+ Opc = X86::LOCK_SUB32mi8;
+ else
+ Opc = X86::LOCK_SUB32mi;
+ } else
+ Opc = X86::LOCK_SUB32mr;
+ } else {
+ if (isCN) {
+ if (Predicate_immSext8(Val.getNode()))
+ Opc = X86::LOCK_ADD32mi8;
+ else
+ Opc = X86::LOCK_ADD32mi;
+ } else
+ Opc = X86::LOCK_ADD32mr;
+ }
+ break;
+ case MVT::i64:
+ if (isInc)
+ Opc = X86::LOCK_INC64m;
+ else if (isDec)
+ Opc = X86::LOCK_DEC64m;
+ else if (isSub) {
+ Opc = X86::LOCK_SUB64mr;
+ if (isCN) {
+ if (Predicate_immSext8(Val.getNode()))
+ Opc = X86::LOCK_SUB64mi8;
+ else if (Predicate_i64immSExt32(Val.getNode()))
+ Opc = X86::LOCK_SUB64mi32;
+ }
+ } else {
+ Opc = X86::LOCK_ADD64mr;
+ if (isCN) {
+ if (Predicate_immSext8(Val.getNode()))
+ Opc = X86::LOCK_ADD64mi8;
+ else if (Predicate_i64immSExt32(Val.getNode()))
+ Opc = X86::LOCK_ADD64mi32;
+ }
+ }
+ break;
+ }
+
+ DebugLoc dl = Node->getDebugLoc();
+ SDValue Undef = SDValue(CurDAG->getMachineNode(TargetOpcode::IMPLICIT_DEF,
+ dl, NVT), 0);
+ MachineSDNode::mmo_iterator MemOp = MF->allocateMemRefsArray(1);
+ MemOp[0] = cast<MemSDNode>(Node)->getMemOperand();
+ if (isInc || isDec) {
+ SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, Chain };
+ SDValue Ret = SDValue(CurDAG->getMachineNode(Opc, dl, MVT::Other, Ops, 6), 0);
+ cast<MachineSDNode>(Ret)->setMemRefs(MemOp, MemOp + 1);
+ SDValue RetVals[] = { Undef, Ret };
+ return CurDAG->getMergeValues(RetVals, 2, dl).getNode();
+ } else {
+ SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, Val, Chain };
+ SDValue Ret = SDValue(CurDAG->getMachineNode(Opc, dl, MVT::Other, Ops, 7), 0);
+ cast<MachineSDNode>(Ret)->setMemRefs(MemOp, MemOp + 1);
+ SDValue RetVals[] = { Undef, Ret };
+ return CurDAG->getMergeValues(RetVals, 2, dl).getNode();
+ }
+}
+
+/// HasNoSignedComparisonUses - Test whether the given X86ISD::CMP node has
+/// any uses which require the SF or OF bits to be accurate.
+static bool HasNoSignedComparisonUses(SDNode *N) {
+ // Examine each user of the node.
+ for (SDNode::use_iterator UI = N->use_begin(),
+ UE = N->use_end(); UI != UE; ++UI) {
+ // Only examine CopyToReg uses.
+ if (UI->getOpcode() != ISD::CopyToReg)
+ return false;
+ // Only examine CopyToReg uses that copy to EFLAGS.
+ if (cast<RegisterSDNode>(UI->getOperand(1))->getReg() !=
+ X86::EFLAGS)
+ return false;
+ // Examine each user of the CopyToReg use.
+ for (SDNode::use_iterator FlagUI = UI->use_begin(),
+ FlagUE = UI->use_end(); FlagUI != FlagUE; ++FlagUI) {
+ // Only examine the Flag result.
+ if (FlagUI.getUse().getResNo() != 1) continue;
+ // Anything unusual: assume conservatively.
+ if (!FlagUI->isMachineOpcode()) return false;
+ // Examine the opcode of the user.
+ switch (FlagUI->getMachineOpcode()) {
+ // These comparisons don't treat the most significant bit specially.
+ case X86::SETAr: case X86::SETAEr: case X86::SETBr: case X86::SETBEr:
+ case X86::SETEr: case X86::SETNEr: case X86::SETPr: case X86::SETNPr:
+ case X86::SETAm: case X86::SETAEm: case X86::SETBm: case X86::SETBEm:
+ case X86::SETEm: case X86::SETNEm: case X86::SETPm: case X86::SETNPm:
+ case X86::JA_4: case X86::JAE_4: case X86::JB_4: case X86::JBE_4:
+ case X86::JE_4: case X86::JNE_4: case X86::JP_4: case X86::JNP_4:
+ case X86::CMOVA16rr: case X86::CMOVA16rm:
+ case X86::CMOVA32rr: case X86::CMOVA32rm:
+ case X86::CMOVA64rr: case X86::CMOVA64rm:
+ case X86::CMOVAE16rr: case X86::CMOVAE16rm:
+ case X86::CMOVAE32rr: case X86::CMOVAE32rm:
+ case X86::CMOVAE64rr: case X86::CMOVAE64rm:
+ case X86::CMOVB16rr: case X86::CMOVB16rm:
+ case X86::CMOVB32rr: case X86::CMOVB32rm:
+ case X86::CMOVB64rr: case X86::CMOVB64rm:
+ case X86::CMOVBE16rr: case X86::CMOVBE16rm:
+ case X86::CMOVBE32rr: case X86::CMOVBE32rm:
+ case X86::CMOVBE64rr: case X86::CMOVBE64rm:
+ case X86::CMOVE16rr: case X86::CMOVE16rm:
+ case X86::CMOVE32rr: case X86::CMOVE32rm:
+ case X86::CMOVE64rr: case X86::CMOVE64rm:
+ case X86::CMOVNE16rr: case X86::CMOVNE16rm:
+ case X86::CMOVNE32rr: case X86::CMOVNE32rm:
+ case X86::CMOVNE64rr: case X86::CMOVNE64rm:
+ case X86::CMOVNP16rr: case X86::CMOVNP16rm:
+ case X86::CMOVNP32rr: case X86::CMOVNP32rm:
+ case X86::CMOVNP64rr: case X86::CMOVNP64rm:
+ case X86::CMOVP16rr: case X86::CMOVP16rm:
+ case X86::CMOVP32rr: case X86::CMOVP32rm:
+ case X86::CMOVP64rr: case X86::CMOVP64rm:
+ continue;
+ // Anything else: assume conservatively.
+ default: return false;
+ }
+ }
+ }
+ return true;
+}
+
+SDNode *X86DAGToDAGISel::Select(SDNode *Node) {
+ EVT NVT = Node->getValueType(0);
unsigned Opc, MOpc;
unsigned Opcode = Node->getOpcode();
DebugLoc dl = Node->getDebugLoc();
-#ifndef NDEBUG
- DOUT << std::string(Indent, ' ') << "Selecting: ";
- DEBUG(Node->dump(CurDAG));
- DOUT << "\n";
- Indent += 2;
-#endif
+ DEBUG(dbgs() << "Selecting: "; Node->dump(CurDAG); dbgs() << '\n');
if (Node->isMachineOpcode()) {
-#ifndef NDEBUG
- DOUT << std::string(Indent-2, ' ') << "== ";
- DEBUG(Node->dump(CurDAG));
- DOUT << "\n";
- Indent -= 2;
-#endif
+ DEBUG(dbgs() << "== "; Node->dump(CurDAG); dbgs() << '\n');
return NULL; // Already selected.
}
switch (Opcode) {
- default: break;
- case X86ISD::GlobalBaseReg:
- return getGlobalBaseReg();
-
- case X86ISD::ATOMOR64_DAG:
- return SelectAtomic64(Node, X86::ATOMOR6432);
- case X86ISD::ATOMXOR64_DAG:
- return SelectAtomic64(Node, X86::ATOMXOR6432);
- case X86ISD::ATOMADD64_DAG:
- return SelectAtomic64(Node, X86::ATOMADD6432);
- case X86ISD::ATOMSUB64_DAG:
- return SelectAtomic64(Node, X86::ATOMSUB6432);
- case X86ISD::ATOMNAND64_DAG:
- return SelectAtomic64(Node, X86::ATOMNAND6432);
- case X86ISD::ATOMAND64_DAG:
- return SelectAtomic64(Node, X86::ATOMAND6432);
- case X86ISD::ATOMSWAP64_DAG:
- return SelectAtomic64(Node, X86::ATOMSWAP6432);
-
- case ISD::SMUL_LOHI:
- case ISD::UMUL_LOHI: {
- SDValue N0 = Node->getOperand(0);
- SDValue N1 = Node->getOperand(1);
-
- bool isSigned = Opcode == ISD::SMUL_LOHI;
- if (!isSigned)
- switch (NVT.getSimpleVT()) {
- default: assert(0 && "Unsupported VT!");
- case MVT::i8: Opc = X86::MUL8r; MOpc = X86::MUL8m; break;
- case MVT::i16: Opc = X86::MUL16r; MOpc = X86::MUL16m; break;
- case MVT::i32: Opc = X86::MUL32r; MOpc = X86::MUL32m; break;
- case MVT::i64: Opc = X86::MUL64r; MOpc = X86::MUL64m; break;
- }
- else
- switch (NVT.getSimpleVT()) {
- default: assert(0 && "Unsupported VT!");
- case MVT::i8: Opc = X86::IMUL8r; MOpc = X86::IMUL8m; break;
- case MVT::i16: Opc = X86::IMUL16r; MOpc = X86::IMUL16m; break;
- case MVT::i32: Opc = X86::IMUL32r; MOpc = X86::IMUL32m; break;
- case MVT::i64: Opc = X86::IMUL64r; MOpc = X86::IMUL64m; break;
- }
+ default: break;
+ case X86ISD::GlobalBaseReg:
+ return getGlobalBaseReg();
+
+ case X86ISD::ATOMOR64_DAG:
+ return SelectAtomic64(Node, X86::ATOMOR6432);
+ case X86ISD::ATOMXOR64_DAG:
+ return SelectAtomic64(Node, X86::ATOMXOR6432);
+ case X86ISD::ATOMADD64_DAG:
+ return SelectAtomic64(Node, X86::ATOMADD6432);
+ case X86ISD::ATOMSUB64_DAG:
+ return SelectAtomic64(Node, X86::ATOMSUB6432);
+ case X86ISD::ATOMNAND64_DAG:
+ return SelectAtomic64(Node, X86::ATOMNAND6432);
+ case X86ISD::ATOMAND64_DAG:
+ return SelectAtomic64(Node, X86::ATOMAND6432);
+ case X86ISD::ATOMSWAP64_DAG:
+ return SelectAtomic64(Node, X86::ATOMSWAP6432);
+
+ case ISD::ATOMIC_LOAD_ADD: {
+ SDNode *RetVal = SelectAtomicLoadAdd(Node, NVT);
+ if (RetVal)
+ return RetVal;
+ break;
+ }
- unsigned LoReg, HiReg;
- switch (NVT.getSimpleVT()) {
- default: assert(0 && "Unsupported VT!");
- case MVT::i8: LoReg = X86::AL; HiReg = X86::AH; break;
- case MVT::i16: LoReg = X86::AX; HiReg = X86::DX; break;
- case MVT::i32: LoReg = X86::EAX; HiReg = X86::EDX; break;
- case MVT::i64: LoReg = X86::RAX; HiReg = X86::RDX; break;
+ case ISD::SMUL_LOHI:
+ case ISD::UMUL_LOHI: {
+ SDValue N0 = Node->getOperand(0);
+ SDValue N1 = Node->getOperand(1);
+
+ bool isSigned = Opcode == ISD::SMUL_LOHI;
+ if (!isSigned) {
+ switch (NVT.getSimpleVT().SimpleTy) {
+ default: llvm_unreachable("Unsupported VT!");
+ case MVT::i8: Opc = X86::MUL8r; MOpc = X86::MUL8m; break;
+ case MVT::i16: Opc = X86::MUL16r; MOpc = X86::MUL16m; break;
+ case MVT::i32: Opc = X86::MUL32r; MOpc = X86::MUL32m; break;
+ case MVT::i64: Opc = X86::MUL64r; MOpc = X86::MUL64m; break;
}
-
- SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4;
- bool foldedLoad = TryFoldLoad(N, N1, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4);
- // multiplty is commmutative
- if (!foldedLoad) {
- foldedLoad = TryFoldLoad(N, N0, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4);
- if (foldedLoad)
- std::swap(N0, N1);
+ } else {
+ switch (NVT.getSimpleVT().SimpleTy) {
+ default: llvm_unreachable("Unsupported VT!");
+ case MVT::i8: Opc = X86::IMUL8r; MOpc = X86::IMUL8m; break;
+ case MVT::i16: Opc = X86::IMUL16r; MOpc = X86::IMUL16m; break;
+ case MVT::i32: Opc = X86::IMUL32r; MOpc = X86::IMUL32m; break;
+ case MVT::i64: Opc = X86::IMUL64r; MOpc = X86::IMUL64m; break;
}
+ }
- SDValue InFlag = CurDAG->getCopyToReg(CurDAG->getEntryNode(), dl, LoReg,
- N0, SDValue()).getValue(1);
-
- if (foldedLoad) {
- SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, N1.getOperand(0),
- InFlag };
- SDNode *CNode =
- CurDAG->getTargetNode(MOpc, dl, MVT::Other, MVT::Flag, Ops,
- array_lengthof(Ops));
- InFlag = SDValue(CNode, 1);
- // Update the chain.
- ReplaceUses(N1.getValue(1), SDValue(CNode, 0));
- } else {
- InFlag =
- SDValue(CurDAG->getTargetNode(Opc, dl, MVT::Flag, N1, InFlag), 0);
- }
+ unsigned LoReg, HiReg;
+ switch (NVT.getSimpleVT().SimpleTy) {
+ default: llvm_unreachable("Unsupported VT!");
+ case MVT::i8: LoReg = X86::AL; HiReg = X86::AH; break;
+ case MVT::i16: LoReg = X86::AX; HiReg = X86::DX; break;
+ case MVT::i32: LoReg = X86::EAX; HiReg = X86::EDX; break;
+ case MVT::i64: LoReg = X86::RAX; HiReg = X86::RDX; break;
+ }
- // Copy the low half of the result, if it is needed.
- if (!N.getValue(0).use_empty()) {
- SDValue Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
- LoReg, NVT, InFlag);
- InFlag = Result.getValue(2);
- ReplaceUses(N.getValue(0), Result);
-#ifndef NDEBUG
- DOUT << std::string(Indent-2, ' ') << "=> ";
- DEBUG(Result.getNode()->dump(CurDAG));
- DOUT << "\n";
-#endif
- }
- // Copy the high half of the result, if it is needed.
- if (!N.getValue(1).use_empty()) {
- SDValue Result;
- if (HiReg == X86::AH && Subtarget->is64Bit()) {
- // Prevent use of AH in a REX instruction by referencing AX instead.
- // Shift it down 8 bits.
- Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
- X86::AX, MVT::i16, InFlag);
- InFlag = Result.getValue(2);
- Result = SDValue(CurDAG->getTargetNode(X86::SHR16ri, dl, MVT::i16,
- Result,
- CurDAG->getTargetConstant(8, MVT::i8)), 0);
- // Then truncate it down to i8.
- SDValue SRIdx = CurDAG->getTargetConstant(X86::SUBREG_8BIT, MVT::i32);
- Result = SDValue(CurDAG->getTargetNode(X86::EXTRACT_SUBREG, dl,
- MVT::i8, Result, SRIdx), 0);
- } else {
- Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
- HiReg, NVT, InFlag);
- InFlag = Result.getValue(2);
- }
- ReplaceUses(N.getValue(1), Result);
-#ifndef NDEBUG
- DOUT << std::string(Indent-2, ' ') << "=> ";
- DEBUG(Result.getNode()->dump(CurDAG));
- DOUT << "\n";
-#endif
- }
+ SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4;
+ bool foldedLoad = TryFoldLoad(Node, N1, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4);
+ // Multiply is commmutative.
+ if (!foldedLoad) {
+ foldedLoad = TryFoldLoad(Node, N0, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4);
+ if (foldedLoad)
+ std::swap(N0, N1);
+ }
-#ifndef NDEBUG
- Indent -= 2;
-#endif
+ SDValue InFlag = CurDAG->getCopyToReg(CurDAG->getEntryNode(), dl, LoReg,
+ N0, SDValue()).getValue(1);
- return NULL;
+ if (foldedLoad) {
+ SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, N1.getOperand(0),
+ InFlag };
+ SDNode *CNode =
+ CurDAG->getMachineNode(MOpc, dl, MVT::Other, MVT::Flag, Ops,
+ array_lengthof(Ops));
+ InFlag = SDValue(CNode, 1);
+ // Update the chain.
+ ReplaceUses(N1.getValue(1), SDValue(CNode, 0));
+ } else {
+ InFlag =
+ SDValue(CurDAG->getMachineNode(Opc, dl, MVT::Flag, N1, InFlag), 0);
}
-
- case ISD::SDIVREM:
- case ISD::UDIVREM: {
- SDValue N0 = Node->getOperand(0);
- SDValue N1 = Node->getOperand(1);
-
- bool isSigned = Opcode == ISD::SDIVREM;
- if (!isSigned)
- switch (NVT.getSimpleVT()) {
- default: assert(0 && "Unsupported VT!");
- case MVT::i8: Opc = X86::DIV8r; MOpc = X86::DIV8m; break;
- case MVT::i16: Opc = X86::DIV16r; MOpc = X86::DIV16m; break;
- case MVT::i32: Opc = X86::DIV32r; MOpc = X86::DIV32m; break;
- case MVT::i64: Opc = X86::DIV64r; MOpc = X86::DIV64m; break;
- }
- else
- switch (NVT.getSimpleVT()) {
- default: assert(0 && "Unsupported VT!");
- case MVT::i8: Opc = X86::IDIV8r; MOpc = X86::IDIV8m; break;
- case MVT::i16: Opc = X86::IDIV16r; MOpc = X86::IDIV16m; break;
- case MVT::i32: Opc = X86::IDIV32r; MOpc = X86::IDIV32m; break;
- case MVT::i64: Opc = X86::IDIV64r; MOpc = X86::IDIV64m; break;
- }
- unsigned LoReg, HiReg;
- unsigned ClrOpcode, SExtOpcode;
- switch (NVT.getSimpleVT()) {
- default: assert(0 && "Unsupported VT!");
- case MVT::i8:
- LoReg = X86::AL; HiReg = X86::AH;
- ClrOpcode = 0;
- SExtOpcode = X86::CBW;
- break;
- case MVT::i16:
- LoReg = X86::AX; HiReg = X86::DX;
- ClrOpcode = X86::MOV16r0;
- SExtOpcode = X86::CWD;
- break;
- case MVT::i32:
- LoReg = X86::EAX; HiReg = X86::EDX;
- ClrOpcode = X86::MOV32r0;
- SExtOpcode = X86::CDQ;
- break;
- case MVT::i64:
- LoReg = X86::RAX; HiReg = X86::RDX;
- ClrOpcode = X86::MOV64r0;
- SExtOpcode = X86::CQO;
- break;
- }
+ // Prevent use of AH in a REX instruction by referencing AX instead.
+ if (HiReg == X86::AH && Subtarget->is64Bit() &&
+ !SDValue(Node, 1).use_empty()) {
+ SDValue Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
+ X86::AX, MVT::i16, InFlag);
+ InFlag = Result.getValue(2);
+ // Get the low part if needed. Don't use getCopyFromReg for aliasing
+ // registers.
+ if (!SDValue(Node, 0).use_empty())
+ ReplaceUses(SDValue(Node, 1),
+ CurDAG->getTargetExtractSubreg(X86::sub_8bit, dl, MVT::i8, Result));
+
+ // Shift AX down 8 bits.
+ Result = SDValue(CurDAG->getMachineNode(X86::SHR16ri, dl, MVT::i16,
+ Result,
+ CurDAG->getTargetConstant(8, MVT::i8)), 0);
+ // Then truncate it down to i8.
+ ReplaceUses(SDValue(Node, 1),
+ CurDAG->getTargetExtractSubreg(X86::sub_8bit, dl, MVT::i8, Result));
+ }
+ // Copy the low half of the result, if it is needed.
+ if (!SDValue(Node, 0).use_empty()) {
+ SDValue Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
+ LoReg, NVT, InFlag);
+ InFlag = Result.getValue(2);
+ ReplaceUses(SDValue(Node, 0), Result);
+ DEBUG(dbgs() << "=> "; Result.getNode()->dump(CurDAG); dbgs() << '\n');
+ }
+ // Copy the high half of the result, if it is needed.
+ if (!SDValue(Node, 1).use_empty()) {
+ SDValue Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
+ HiReg, NVT, InFlag);
+ InFlag = Result.getValue(2);
+ ReplaceUses(SDValue(Node, 1), Result);
+ DEBUG(dbgs() << "=> "; Result.getNode()->dump(CurDAG); dbgs() << '\n');
+ }
- SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4;
- bool foldedLoad = TryFoldLoad(N, N1, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4);
- bool signBitIsZero = CurDAG->SignBitIsZero(N0);
-
- SDValue InFlag;
- if (NVT == MVT::i8 && (!isSigned || signBitIsZero)) {
- // Special case for div8, just use a move with zero extension to AX to
- // clear the upper 8 bits (AH).
- SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, Move, Chain;
- if (TryFoldLoad(N, N0, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4)) {
- SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, N0.getOperand(0) };
- Move =
- SDValue(CurDAG->getTargetNode(X86::MOVZX16rm8, dl, MVT::i16,
- MVT::Other, Ops,
- array_lengthof(Ops)), 0);
- Chain = Move.getValue(1);
- ReplaceUses(N0.getValue(1), Chain);
- } else {
- Move =
- SDValue(CurDAG->getTargetNode(X86::MOVZX16rr8, dl, MVT::i16, N0),0);
- Chain = CurDAG->getEntryNode();
- }
- Chain = CurDAG->getCopyToReg(Chain, dl, X86::AX, Move, SDValue());
- InFlag = Chain.getValue(1);
- } else {
- InFlag =
- CurDAG->getCopyToReg(CurDAG->getEntryNode(), dl,
- LoReg, N0, SDValue()).getValue(1);
- if (isSigned && !signBitIsZero) {
- // Sign extend the low part into the high part.
- InFlag =
- SDValue(CurDAG->getTargetNode(SExtOpcode, dl, MVT::Flag, InFlag),0);
- } else {
- // Zero out the high part, effectively zero extending the input.
- SDValue ClrNode = SDValue(CurDAG->getTargetNode(ClrOpcode, dl, NVT),
- 0);
- InFlag = CurDAG->getCopyToReg(CurDAG->getEntryNode(), dl, HiReg,
- ClrNode, InFlag).getValue(1);
- }
+ return NULL;
+ }
+
+ case ISD::SDIVREM:
+ case ISD::UDIVREM: {
+ SDValue N0 = Node->getOperand(0);
+ SDValue N1 = Node->getOperand(1);
+
+ bool isSigned = Opcode == ISD::SDIVREM;
+ if (!isSigned) {
+ switch (NVT.getSimpleVT().SimpleTy) {
+ default: llvm_unreachable("Unsupported VT!");
+ case MVT::i8: Opc = X86::DIV8r; MOpc = X86::DIV8m; break;
+ case MVT::i16: Opc = X86::DIV16r; MOpc = X86::DIV16m; break;
+ case MVT::i32: Opc = X86::DIV32r; MOpc = X86::DIV32m; break;
+ case MVT::i64: Opc = X86::DIV64r; MOpc = X86::DIV64m; break;
+ }
+ } else {
+ switch (NVT.getSimpleVT().SimpleTy) {
+ default: llvm_unreachable("Unsupported VT!");
+ case MVT::i8: Opc = X86::IDIV8r; MOpc = X86::IDIV8m; break;
+ case MVT::i16: Opc = X86::IDIV16r; MOpc = X86::IDIV16m; break;
+ case MVT::i32: Opc = X86::IDIV32r; MOpc = X86::IDIV32m; break;
+ case MVT::i64: Opc = X86::IDIV64r; MOpc = X86::IDIV64m; break;
}
+ }
- if (foldedLoad) {
- SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, N1.getOperand(0),
- InFlag };
- SDNode *CNode =
- CurDAG->getTargetNode(MOpc, dl, MVT::Other, MVT::Flag, Ops,
- array_lengthof(Ops));
- InFlag = SDValue(CNode, 1);
- // Update the chain.
- ReplaceUses(N1.getValue(1), SDValue(CNode, 0));
+ unsigned LoReg, HiReg, ClrReg;
+ unsigned ClrOpcode, SExtOpcode;
+ switch (NVT.getSimpleVT().SimpleTy) {
+ default: llvm_unreachable("Unsupported VT!");
+ case MVT::i8:
+ LoReg = X86::AL; ClrReg = HiReg = X86::AH;
+ ClrOpcode = 0;
+ SExtOpcode = X86::CBW;
+ break;
+ case MVT::i16:
+ LoReg = X86::AX; HiReg = X86::DX;
+ ClrOpcode = X86::MOV16r0; ClrReg = X86::DX;
+ SExtOpcode = X86::CWD;
+ break;
+ case MVT::i32:
+ LoReg = X86::EAX; ClrReg = HiReg = X86::EDX;
+ ClrOpcode = X86::MOV32r0;
+ SExtOpcode = X86::CDQ;
+ break;
+ case MVT::i64:
+ LoReg = X86::RAX; ClrReg = HiReg = X86::RDX;
+ ClrOpcode = X86::MOV64r0;
+ SExtOpcode = X86::CQO;
+ break;
+ }
+
+ SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4;
+ bool foldedLoad = TryFoldLoad(Node, N1, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4);
+ bool signBitIsZero = CurDAG->SignBitIsZero(N0);
+
+ SDValue InFlag;
+ if (NVT == MVT::i8 && (!isSigned || signBitIsZero)) {
+ // Special case for div8, just use a move with zero extension to AX to
+ // clear the upper 8 bits (AH).
+ SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, Move, Chain;
+ if (TryFoldLoad(Node, N0, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4)) {
+ SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, N0.getOperand(0) };
+ Move =
+ SDValue(CurDAG->getMachineNode(X86::MOVZX16rm8, dl, MVT::i16,
+ MVT::Other, Ops,
+ array_lengthof(Ops)), 0);
+ Chain = Move.getValue(1);
+ ReplaceUses(N0.getValue(1), Chain);
} else {
+ Move =
+ SDValue(CurDAG->getMachineNode(X86::MOVZX16rr8, dl, MVT::i16, N0),0);
+ Chain = CurDAG->getEntryNode();
+ }
+ Chain = CurDAG->getCopyToReg(Chain, dl, X86::AX, Move, SDValue());
+ InFlag = Chain.getValue(1);
+ } else {
+ InFlag =
+ CurDAG->getCopyToReg(CurDAG->getEntryNode(), dl,
+ LoReg, N0, SDValue()).getValue(1);
+ if (isSigned && !signBitIsZero) {
+ // Sign extend the low part into the high part.
InFlag =
- SDValue(CurDAG->getTargetNode(Opc, dl, MVT::Flag, N1, InFlag), 0);
+ SDValue(CurDAG->getMachineNode(SExtOpcode, dl, MVT::Flag, InFlag),0);
+ } else {
+ // Zero out the high part, effectively zero extending the input.
+ SDValue ClrNode =
+ SDValue(CurDAG->getMachineNode(ClrOpcode, dl, NVT), 0);
+ InFlag = CurDAG->getCopyToReg(CurDAG->getEntryNode(), dl, ClrReg,
+ ClrNode, InFlag).getValue(1);
}
+ }
+
+ if (foldedLoad) {
+ SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, N1.getOperand(0),
+ InFlag };
+ SDNode *CNode =
+ CurDAG->getMachineNode(MOpc, dl, MVT::Other, MVT::Flag, Ops,
+ array_lengthof(Ops));
+ InFlag = SDValue(CNode, 1);
+ // Update the chain.
+ ReplaceUses(N1.getValue(1), SDValue(CNode, 0));
+ } else {
+ InFlag =
+ SDValue(CurDAG->getMachineNode(Opc, dl, MVT::Flag, N1, InFlag), 0);
+ }
+
+ // Prevent use of AH in a REX instruction by referencing AX instead.
+ // Shift it down 8 bits.
+ if (HiReg == X86::AH && Subtarget->is64Bit() &&
+ !SDValue(Node, 1).use_empty()) {
+ SDValue Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
+ X86::AX, MVT::i16, InFlag);
+ InFlag = Result.getValue(2);
+
+ // If we also need AL (the quotient), get it by extracting a subreg from
+ // Result. The fast register allocator does not like multiple CopyFromReg
+ // nodes using aliasing registers.
+ if (!SDValue(Node, 0).use_empty())
+ ReplaceUses(SDValue(Node, 0),
+ CurDAG->getTargetExtractSubreg(X86::sub_8bit, dl, MVT::i8, Result));
+
+ // Shift AX right by 8 bits instead of using AH.
+ Result = SDValue(CurDAG->getMachineNode(X86::SHR16ri, dl, MVT::i16,
+ Result,
+ CurDAG->getTargetConstant(8, MVT::i8)),
+ 0);
+ ReplaceUses(SDValue(Node, 1),
+ CurDAG->getTargetExtractSubreg(X86::sub_8bit, dl, MVT::i8, Result));
+ }
+ // Copy the division (low) result, if it is needed.
+ if (!SDValue(Node, 0).use_empty()) {
+ SDValue Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
+ LoReg, NVT, InFlag);
+ InFlag = Result.getValue(2);
+ ReplaceUses(SDValue(Node, 0), Result);
+ DEBUG(dbgs() << "=> "; Result.getNode()->dump(CurDAG); dbgs() << '\n');
+ }
+ // Copy the remainder (high) result, if it is needed.
+ if (!SDValue(Node, 1).use_empty()) {
+ SDValue Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
+ HiReg, NVT, InFlag);
+ InFlag = Result.getValue(2);
+ ReplaceUses(SDValue(Node, 1), Result);
+ DEBUG(dbgs() << "=> "; Result.getNode()->dump(CurDAG); dbgs() << '\n');
+ }
+ return NULL;
+ }
+
+ case X86ISD::CMP: {
+ SDValue N0 = Node->getOperand(0);
+ SDValue N1 = Node->getOperand(1);
+
+ // Look for (X86cmp (and $op, $imm), 0) and see if we can convert it to
+ // use a smaller encoding.
+ if (N0.getOpcode() == ISD::TRUNCATE && N0.hasOneUse() &&
+ HasNoSignedComparisonUses(Node))
+ // Look past the truncate if CMP is the only use of it.
+ N0 = N0.getOperand(0);
+ if (N0.getNode()->getOpcode() == ISD::AND && N0.getNode()->hasOneUse() &&
+ N0.getValueType() != MVT::i8 &&
+ X86::isZeroNode(N1)) {
+ ConstantSDNode *C = dyn_cast<ConstantSDNode>(N0.getNode()->getOperand(1));
+ if (!C) break;
+
+ // For example, convert "testl %eax, $8" to "testb %al, $8"
+ if ((C->getZExtValue() & ~UINT64_C(0xff)) == 0 &&
+ (!(C->getZExtValue() & 0x80) ||
+ HasNoSignedComparisonUses(Node))) {
+ SDValue Imm = CurDAG->getTargetConstant(C->getZExtValue(), MVT::i8);
+ SDValue Reg = N0.getNode()->getOperand(0);
+
+ // On x86-32, only the ABCD registers have 8-bit subregisters.
+ if (!Subtarget->is64Bit()) {
+ TargetRegisterClass *TRC = 0;
+ switch (N0.getValueType().getSimpleVT().SimpleTy) {
+ case MVT::i32: TRC = &X86::GR32_ABCDRegClass; break;
+ case MVT::i16: TRC = &X86::GR16_ABCDRegClass; break;
+ default: llvm_unreachable("Unsupported TEST operand type!");
+ }
+ SDValue RC = CurDAG->getTargetConstant(TRC->getID(), MVT::i32);
+ Reg = SDValue(CurDAG->getMachineNode(X86::COPY_TO_REGCLASS, dl,
+ Reg.getValueType(), Reg, RC), 0);
+ }
+
+ // Extract the l-register.
+ SDValue Subreg = CurDAG->getTargetExtractSubreg(X86::sub_8bit, dl,
+ MVT::i8, Reg);
- // Copy the division (low) result, if it is needed.
- if (!N.getValue(0).use_empty()) {
- SDValue Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
- LoReg, NVT, InFlag);
- InFlag = Result.getValue(2);
- ReplaceUses(N.getValue(0), Result);
-#ifndef NDEBUG
- DOUT << std::string(Indent-2, ' ') << "=> ";
- DEBUG(Result.getNode()->dump(CurDAG));
- DOUT << "\n";
-#endif
+ // Emit a testb.
+ return CurDAG->getMachineNode(X86::TEST8ri, dl, MVT::i32, Subreg, Imm);
}
- // Copy the remainder (high) result, if it is needed.
- if (!N.getValue(1).use_empty()) {
- SDValue Result;
- if (HiReg == X86::AH && Subtarget->is64Bit()) {
- // Prevent use of AH in a REX instruction by referencing AX instead.
- // Shift it down 8 bits.
- Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
- X86::AX, MVT::i16, InFlag);
- InFlag = Result.getValue(2);
- Result = SDValue(CurDAG->getTargetNode(X86::SHR16ri, dl, MVT::i16,
- Result,
- CurDAG->getTargetConstant(8, MVT::i8)),
- 0);
- // Then truncate it down to i8.
- SDValue SRIdx = CurDAG->getTargetConstant(X86::SUBREG_8BIT, MVT::i32);
- Result = SDValue(CurDAG->getTargetNode(X86::EXTRACT_SUBREG, dl,
- MVT::i8, Result, SRIdx), 0);
- } else {
- Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
- HiReg, NVT, InFlag);
- InFlag = Result.getValue(2);
+
+ // For example, "testl %eax, $2048" to "testb %ah, $8".
+ if ((C->getZExtValue() & ~UINT64_C(0xff00)) == 0 &&
+ (!(C->getZExtValue() & 0x8000) ||
+ HasNoSignedComparisonUses(Node))) {
+ // Shift the immediate right by 8 bits.
+ SDValue ShiftedImm = CurDAG->getTargetConstant(C->getZExtValue() >> 8,
+ MVT::i8);
+ SDValue Reg = N0.getNode()->getOperand(0);
+
+ // Put the value in an ABCD register.
+ TargetRegisterClass *TRC = 0;
+ switch (N0.getValueType().getSimpleVT().SimpleTy) {
+ case MVT::i64: TRC = &X86::GR64_ABCDRegClass; break;
+ case MVT::i32: TRC = &X86::GR32_ABCDRegClass; break;
+ case MVT::i16: TRC = &X86::GR16_ABCDRegClass; break;
+ default: llvm_unreachable("Unsupported TEST operand type!");
}
- ReplaceUses(N.getValue(1), Result);
-#ifndef NDEBUG
- DOUT << std::string(Indent-2, ' ') << "=> ";
- DEBUG(Result.getNode()->dump(CurDAG));
- DOUT << "\n";
-#endif
+ SDValue RC = CurDAG->getTargetConstant(TRC->getID(), MVT::i32);
+ Reg = SDValue(CurDAG->getMachineNode(X86::COPY_TO_REGCLASS, dl,
+ Reg.getValueType(), Reg, RC), 0);
+
+ // Extract the h-register.
+ SDValue Subreg = CurDAG->getTargetExtractSubreg(X86::sub_8bit_hi, dl,
+ MVT::i8, Reg);
+
+ // Emit a testb. No special NOREX tricks are needed since there's
+ // only one GPR operand!
+ return CurDAG->getMachineNode(X86::TEST8ri, dl, MVT::i32,
+ Subreg, ShiftedImm);
}
-#ifndef NDEBUG
- Indent -= 2;
-#endif
+ // For example, "testl %eax, $32776" to "testw %ax, $32776".
+ if ((C->getZExtValue() & ~UINT64_C(0xffff)) == 0 &&
+ N0.getValueType() != MVT::i16 &&
+ (!(C->getZExtValue() & 0x8000) ||
+ HasNoSignedComparisonUses(Node))) {
+ SDValue Imm = CurDAG->getTargetConstant(C->getZExtValue(), MVT::i16);
+ SDValue Reg = N0.getNode()->getOperand(0);
- return NULL;
- }
+ // Extract the 16-bit subregister.
+ SDValue Subreg = CurDAG->getTargetExtractSubreg(X86::sub_16bit, dl,
+ MVT::i16, Reg);
- case ISD::DECLARE: {
- // Handle DECLARE nodes here because the second operand may have been
- // wrapped in X86ISD::Wrapper.
- SDValue Chain = Node->getOperand(0);
- SDValue N1 = Node->getOperand(1);
- SDValue N2 = Node->getOperand(2);
- FrameIndexSDNode *FINode = dyn_cast<FrameIndexSDNode>(N1);
-
- // FIXME: We need to handle this for VLAs.
- if (!FINode) {
- ReplaceUses(N.getValue(0), Chain);
- return NULL;
+ // Emit a testw.
+ return CurDAG->getMachineNode(X86::TEST16ri, dl, MVT::i32, Subreg, Imm);
}
-
- if (N2.getOpcode() == ISD::ADD &&
- N2.getOperand(0).getOpcode() == X86ISD::GlobalBaseReg)
- N2 = N2.getOperand(1);
-
- // If N2 is not Wrapper(decriptor) then the llvm.declare is mangled
- // somehow, just ignore it.
- if (N2.getOpcode() != X86ISD::Wrapper) {
- ReplaceUses(N.getValue(0), Chain);
- return NULL;
- }
- GlobalAddressSDNode *GVNode =
- dyn_cast<GlobalAddressSDNode>(N2.getOperand(0));
- if (GVNode == 0) {
- ReplaceUses(N.getValue(0), Chain);
- return NULL;
+
+ // For example, "testq %rax, $268468232" to "testl %eax, $268468232".
+ if ((C->getZExtValue() & ~UINT64_C(0xffffffff)) == 0 &&
+ N0.getValueType() == MVT::i64 &&
+ (!(C->getZExtValue() & 0x80000000) ||
+ HasNoSignedComparisonUses(Node))) {
+ SDValue Imm = CurDAG->getTargetConstant(C->getZExtValue(), MVT::i32);
+ SDValue Reg = N0.getNode()->getOperand(0);
+
+ // Extract the 32-bit subregister.
+ SDValue Subreg = CurDAG->getTargetExtractSubreg(X86::sub_32bit, dl,
+ MVT::i32, Reg);
+
+ // Emit a testl.
+ return CurDAG->getMachineNode(X86::TEST32ri, dl, MVT::i32, Subreg, Imm);
}
- SDValue Tmp1 = CurDAG->getTargetFrameIndex(FINode->getIndex(),
- TLI.getPointerTy());
- SDValue Tmp2 = CurDAG->getTargetGlobalAddress(GVNode->getGlobal(),
- TLI.getPointerTy());
- SDValue Ops[] = { Tmp1, Tmp2, Chain };
- return CurDAG->getTargetNode(TargetInstrInfo::DECLARE, dl,
- MVT::Other, Ops,
- array_lengthof(Ops));
}
+ break;
+ }
}
- SDNode *ResNode = SelectCode(N);
+ SDNode *ResNode = SelectCode(Node);
-#ifndef NDEBUG
- DOUT << std::string(Indent-2, ' ') << "=> ";
- if (ResNode == NULL || ResNode == N.getNode())
- DEBUG(N.getNode()->dump(CurDAG));
- else
- DEBUG(ResNode->dump(CurDAG));
- DOUT << "\n";
- Indent -= 2;
-#endif
+ DEBUG(dbgs() << "=> ";
+ if (ResNode == NULL || ResNode == Node)
+ Node->dump(CurDAG);
+ else
+ ResNode->dump(CurDAG);
+ dbgs() << '\n');
return ResNode;
}
case 'v': // not offsetable ??
default: return true;
case 'm': // memory
- if (!SelectAddr(Op, Op, Op0, Op1, Op2, Op3, Op4))
+ if (!SelectAddr(Op.getNode(), Op, Op0, Op1, Op2, Op3, Op4))
return true;
break;
}
/// createX86ISelDag - This pass converts a legalized DAG into a
/// X86-specific DAG, ready for instruction scheduling.
///
-FunctionPass *llvm::createX86ISelDag(X86TargetMachine &TM, bool Fast) {
- return new X86DAGToDAGISel(TM, Fast);
+FunctionPass *llvm::createX86ISelDag(X86TargetMachine &TM,
+ llvm::CodeGenOpt::Level OptLevel) {
+ return new X86DAGToDAGISel(TM, OptLevel);
}