// SystemZ::CCMASK_*.
bits<4> CCValues = 0;
- // True if the instruction sets CC to 0 when the result is 0.
- bit CCHasZero = 0;
-
- // True if the instruction sets CC to 1 when the result is less than 0
- // and to 2 when the result is greater than 0.
- bit CCHasOrder = 0;
+ // The subset of CCValues that have the same meaning as they would after
+ // a comparison of the first operand against zero.
+ bits<4> CompareZeroCCMask = 0;
// True if the instruction is conditional and if the CC mask operand
// comes first (as for BRC, etc.).
let TSFlags{4} = Is128Bit;
let TSFlags{9-5} = AccessBytes;
let TSFlags{13-10} = CCValues;
- let TSFlags{14} = CCHasZero;
- let TSFlags{15} = CCHasOrder;
- let TSFlags{16} = CCMaskFirst;
- let TSFlags{17} = CCMaskLast;
- let TSFlags{18} = IsLogical;
+ let TSFlags{17-14} = CompareZeroCCMask;
+ let TSFlags{18} = CCMaskFirst;
+ let TSFlags{19} = CCMaskLast;
+ let TSFlags{20} = IsLogical;
}
//===----------------------------------------------------------------------===//
bits<4> R1;
bits<4> R2;
bits<4> R3;
+ bits<4> R4;
let Inst{31-16} = op;
let Inst{15-12} = R3;
- let Inst{11-8} = 0;
+ let Inst{11-8} = R4;
let Inst{7-4} = R1;
let Inst{3-0} = R2;
}
// to store. Other stored registers are added as implicit uses.
//
// Unary:
-// One register output operand and one input operand. The input
-// operand may be a register, immediate or memory.
+// One register output operand and one input operand.
//
// Binary:
-// One register output operand and two input operands. The first
-// input operand is always a register and he second may be a register,
-// immediate or memory.
-//
-// Shift:
-// One register output operand and two input operands. The first
-// input operand is a register and the second has the same form as
-// an address (although it isn't actually used to address memory).
+// One register output operand and two input operands.
//
// Compare:
-// Two input operands. The first operand is always a register,
-// the second may be a register, immediate or memory.
+// Two input operands and an implicit CC output operand.
//
// Ternary:
-// One register output operand and three register input operands.
+// One register output operand and three input operands.
+//
+// LoadAndOp:
+// One output operand and two input operands, one of which is an address.
+// The instruction both reads from and writes to the address.
//
// CmpSwap:
-// One output operand and three input operands. The first two
-// operands are registers and the third is an address. The instruction
-// both reads from and writes to the address.
+// One output operand and three input operands, one of which is an address.
+// The instruction both reads from and writes to the address.
//
// RotateSelect:
// One output operand and five input operands. The first two operands
// are registers and the other three are immediates.
//
+// Prefetch:
+// One 4-bit immediate operand and one address operand. The immediate
+// operand is 1 for a load prefetch and 2 for a store prefetch.
+//
// The format determines which input operands are tied to output operands,
// and also determines the shape of any address operand.
//
class InherentRRE<string mnemonic, bits<16> opcode, RegisterOperand cls,
dag src>
: InstRRE<opcode, (outs cls:$R1), (ins),
- mnemonic#"r\t$R1",
+ mnemonic#"\t$R1",
[(set cls:$R1, src)]> {
let R2 = 0;
}
let mayStore = 1;
}
+// StoreSI* instructions are used to store an integer to memory, but the
+// addresses are more restricted than for normal stores. If we are in the
+// situation of having to force either the address into a register or the
+// constant into a register, it's usually better to do the latter.
+// We therefore match the address in the same way as a normal store and
+// only use the StoreSI* instruction if the matched address is suitable.
class StoreSI<string mnemonic, bits<8> opcode, SDPatternOperator operator,
- Immediate imm, AddressingMode mode = bdaddr12only>
- : InstSI<opcode, (outs), (ins mode:$BD1, imm:$I2),
+ Immediate imm>
+ : InstSI<opcode, (outs), (ins mviaddr12pair:$BD1, imm:$I2),
mnemonic#"\t$BD1, $I2",
- [(operator imm:$I2, mode:$BD1)]> {
+ [(operator imm:$I2, mviaddr12pair:$BD1)]> {
let mayStore = 1;
}
class StoreSIY<string mnemonic, bits<16> opcode, SDPatternOperator operator,
- Immediate imm, AddressingMode mode = bdaddr20only>
- : InstSIY<opcode, (outs), (ins mode:$BD1, imm:$I2),
+ Immediate imm>
+ : InstSIY<opcode, (outs), (ins mviaddr20pair:$BD1, imm:$I2),
mnemonic#"\t$BD1, $I2",
- [(operator imm:$I2, mode:$BD1)]> {
+ [(operator imm:$I2, mviaddr20pair:$BD1)]> {
let mayStore = 1;
}
class StoreSIL<string mnemonic, bits<16> opcode, SDPatternOperator operator,
Immediate imm>
- : InstSIL<opcode, (outs), (ins bdaddr12only:$BD1, imm:$I2),
+ : InstSIL<opcode, (outs), (ins mviaddr12pair:$BD1, imm:$I2),
mnemonic#"\t$BD1, $I2",
- [(operator imm:$I2, bdaddr12only:$BD1)]> {
+ [(operator imm:$I2, mviaddr12pair:$BD1)]> {
let mayStore = 1;
}
SDPatternOperator operator, Immediate imm> {
let DispKey = mnemonic in {
let DispSize = "12" in
- def "" : StoreSI<mnemonic, siOpcode, operator, imm, bdaddr12pair>;
+ def "" : StoreSI<mnemonic, siOpcode, operator, imm>;
let DispSize = "20" in
- def Y : StoreSIY<mnemonic#"y", siyOpcode, operator, imm, bdaddr20pair>;
+ def Y : StoreSIY<mnemonic#"y", siyOpcode, operator, imm>;
}
}
class AsmCondStoreRSY<string mnemonic, bits<16> opcode,
RegisterOperand cls, bits<5> bytes,
AddressingMode mode = bdaddr20only>
- : InstRSY<opcode, (outs), (ins cls:$R1, mode:$BD2, uimm8zx4:$R3),
+ : InstRSY<opcode, (outs), (ins cls:$R1, mode:$BD2, imm32zx4:$R3),
mnemonic#"\t$R1, $BD2, $R3", []>,
Requires<[FeatureLoadStoreOnCond]> {
let mayStore = 1;
class UnaryRRF<string mnemonic, bits<16> opcode, RegisterOperand cls1,
RegisterOperand cls2>
- : InstRRF<opcode, (outs cls1:$R1), (ins uimm8zx4:$R3, cls2:$R2),
+ : InstRRF<opcode, (outs cls1:$R1), (ins imm32zx4:$R3, cls2:$R2),
mnemonic#"r\t$R1, $R3, $R2", []> {
let OpKey = mnemonic ## cls1;
let OpType = "reg";
+ let R4 = 0;
}
+class UnaryRRF4<string mnemonic, bits<16> opcode, RegisterOperand cls1,
+ RegisterOperand cls2>
+ : InstRRF<opcode, (outs cls1:$R1), (ins imm32zx4:$R3, cls2:$R2, imm32zx4:$R4),
+ mnemonic#"\t$R1, $R3, $R2, $R4", []>;
+
// These instructions are generated by if conversion. The old value of R1
// is added as an implicit use.
class CondUnaryRRF<string mnemonic, bits<16> opcode, RegisterOperand cls1,
mnemonic#"r$R3\t$R1, $R2", []>,
Requires<[FeatureLoadStoreOnCond]> {
let CCMaskLast = 1;
+ let R4 = 0;
}
// Like CondUnaryRRF, but used for the raw assembly form. The condition-code
// mask is the third operand rather than being part of the mnemonic.
class AsmCondUnaryRRF<string mnemonic, bits<16> opcode, RegisterOperand cls1,
RegisterOperand cls2>
- : InstRRF<opcode, (outs cls1:$R1), (ins cls1:$R1src, cls2:$R2, uimm8zx4:$R3),
+ : InstRRF<opcode, (outs cls1:$R1), (ins cls1:$R1src, cls2:$R2, imm32zx4:$R3),
mnemonic#"r\t$R1, $R2, $R3", []>,
Requires<[FeatureLoadStoreOnCond]> {
let Constraints = "$R1 = $R1src";
let DisableEncoding = "$R1src";
+ let R4 = 0;
}
// Like CondUnaryRRF, but with a fixed CC mask.
let Constraints = "$R1 = $R1src";
let DisableEncoding = "$R1src";
let R3 = ccmask;
+ let R4 = 0;
}
class UnaryRI<string mnemonic, bits<12> opcode, SDPatternOperator operator,
class AsmCondUnaryRSY<string mnemonic, bits<16> opcode,
RegisterOperand cls, bits<5> bytes,
AddressingMode mode = bdaddr20only>
- : InstRSY<opcode, (outs cls:$R1), (ins cls:$R1src, mode:$BD2, uimm8zx4:$R3),
+ : InstRSY<opcode, (outs cls:$R1), (ins cls:$R1src, mode:$BD2, imm32zx4:$R3),
mnemonic#"\t$R1, $BD2, $R3", []>,
Requires<[FeatureLoadStoreOnCond]> {
let mayLoad = 1;
[(set cls1:$R1, (operator cls1:$R3, cls2:$R2))]> {
let OpKey = mnemonic ## cls1;
let OpType = "reg";
+ let R4 = 0;
}
class BinaryRRFK<string mnemonic, bits<16> opcode, SDPatternOperator operator,
RegisterOperand cls1, RegisterOperand cls2>
: InstRRF<opcode, (outs cls1:$R1), (ins cls1:$R2, cls2:$R3),
mnemonic#"rk\t$R1, $R2, $R3",
- [(set cls1:$R1, (operator cls1:$R2, cls2:$R3))]>;
+ [(set cls1:$R1, (operator cls1:$R2, cls2:$R3))]> {
+ let R4 = 0;
+}
multiclass BinaryRRAndK<string mnemonic, bits<8> opcode1, bits<16> opcode2,
SDPatternOperator operator, RegisterOperand cls1,
let DisableEncoding = "$R1src";
}
+class BinaryRS<string mnemonic, bits<8> opcode, SDPatternOperator operator,
+ RegisterOperand cls>
+ : InstRS<opcode, (outs cls:$R1), (ins cls:$R1src, shift12only:$BD2),
+ mnemonic#"\t$R1, $BD2",
+ [(set cls:$R1, (operator cls:$R1src, shift12only:$BD2))]> {
+ let R3 = 0;
+ let Constraints = "$R1 = $R1src";
+ let DisableEncoding = "$R1src";
+}
+
+class BinaryRSY<string mnemonic, bits<16> opcode, SDPatternOperator operator,
+ RegisterOperand cls>
+ : InstRSY<opcode, (outs cls:$R1), (ins cls:$R3, shift20only:$BD2),
+ mnemonic#"\t$R1, $R3, $BD2",
+ [(set cls:$R1, (operator cls:$R3, shift20only:$BD2))]>;
+
+multiclass BinaryRSAndK<string mnemonic, bits<8> opcode1, bits<16> opcode2,
+ SDPatternOperator operator, RegisterOperand cls> {
+ let NumOpsKey = mnemonic in {
+ let NumOpsValue = "3" in
+ def K : BinaryRSY<mnemonic##"k", opcode2, null_frag, cls>,
+ Requires<[FeatureDistinctOps]>;
+ let NumOpsValue = "2", isConvertibleToThreeAddress = 1 in
+ def "" : BinaryRS<mnemonic, opcode1, operator, cls>;
+ }
+}
+
class BinaryRX<string mnemonic, bits<8> opcode, SDPatternOperator operator,
RegisterOperand cls, SDPatternOperator load, bits<5> bytes,
AddressingMode mode = bdxaddr12only>
}
}
-class ShiftRS<string mnemonic, bits<8> opcode, SDPatternOperator operator,
- RegisterOperand cls>
- : InstRS<opcode, (outs cls:$R1), (ins cls:$R1src, shift12only:$BD2),
- mnemonic#"\t$R1, $BD2",
- [(set cls:$R1, (operator cls:$R1src, shift12only:$BD2))]> {
- let R3 = 0;
- let Constraints = "$R1 = $R1src";
- let DisableEncoding = "$R1src";
-}
-
-class ShiftRSY<string mnemonic, bits<16> opcode, SDPatternOperator operator,
- RegisterOperand cls>
- : InstRSY<opcode, (outs cls:$R1), (ins cls:$R3, shift20only:$BD2),
- mnemonic#"\t$R1, $R3, $BD2",
- [(set cls:$R1, (operator cls:$R3, shift20only:$BD2))]>;
-
-multiclass ShiftRSAndK<string mnemonic, bits<8> opcode1, bits<16> opcode2,
- SDPatternOperator operator, RegisterOperand cls> {
- let NumOpsKey = mnemonic in {
- let NumOpsValue = "3" in
- def K : ShiftRSY<mnemonic##"k", opcode2, null_frag, cls>,
- Requires<[FeatureDistinctOps]>;
- let NumOpsValue = "2", isConvertibleToThreeAddress = 1 in
- def "" : ShiftRS<mnemonic, opcode1, operator, cls>;
- }
-}
-
class CompareRR<string mnemonic, bits<8> opcode, SDPatternOperator operator,
RegisterOperand cls1, RegisterOperand cls2>
: InstRR<opcode, (outs), (ins cls1:$R1, cls2:$R2),
let AccessBytes = bytes;
}
+class LoadAndOpRSY<string mnemonic, bits<16> opcode, SDPatternOperator operator,
+ RegisterOperand cls, AddressingMode mode = bdaddr20only>
+ : InstRSY<opcode, (outs cls:$R1), (ins cls:$R3, mode:$BD2),
+ mnemonic#"\t$R1, $R3, $BD2",
+ [(set cls:$R1, (operator mode:$BD2, cls:$R3))]> {
+ let mayLoad = 1;
+ let mayStore = 1;
+}
+
class CmpSwapRS<string mnemonic, bits<8> opcode, SDPatternOperator operator,
RegisterOperand cls, AddressingMode mode = bdaddr12only>
: InstRS<opcode, (outs cls:$R1), (ins cls:$R1src, cls:$R3, mode:$BD2),
class RotateSelectRIEf<string mnemonic, bits<16> opcode, RegisterOperand cls1,
RegisterOperand cls2>
: InstRIEf<opcode, (outs cls1:$R1),
- (ins cls1:$R1src, cls2:$R2, uimm8:$I3, uimm8:$I4, uimm8zx6:$I5),
+ (ins cls1:$R1src, cls2:$R2, imm32zx8:$I3, imm32zx8:$I4,
+ imm32zx6:$I5),
mnemonic#"\t$R1, $R2, $I3, $I4, $I5", []> {
let Constraints = "$R1 = $R1src";
let DisableEncoding = "$R1src";
}
+class PrefetchRXY<string mnemonic, bits<16> opcode, SDPatternOperator operator>
+ : InstRXY<opcode, (outs), (ins imm32zx4:$R1, bdxaddr20only:$XBD2),
+ mnemonic##"\t$R1, $XBD2",
+ [(operator imm32zx4:$R1, bdxaddr20only:$XBD2)]>;
+
+class PrefetchRILPC<string mnemonic, bits<12> opcode,
+ SDPatternOperator operator>
+ : InstRIL<opcode, (outs), (ins imm32zx4:$R1, pcrel32:$I2),
+ mnemonic##"\t$R1, $I2",
+ [(operator imm32zx4:$R1, pcrel32:$I2)]> {
+ // We want PC-relative addresses to be tried ahead of BD and BDX addresses.
+ // However, BDXs have two extra operands and are therefore 6 units more
+ // complex.
+ let AddedComplexity = 7;
+}
+
+// A floating-point load-and test operation. Create both a normal unary
+// operation and one that acts as a comparison against zero.
+multiclass LoadAndTestRRE<string mnemonic, bits<16> opcode,
+ RegisterOperand cls> {
+ def "" : UnaryRRE<mnemonic, opcode, null_frag, cls, cls>;
+ let isCodeGenOnly = 1 in
+ def Compare : CompareRRE<mnemonic, opcode, null_frag, cls, cls>;
+}
+
//===----------------------------------------------------------------------===//
// Pseudo instructions
//===----------------------------------------------------------------------===//
let isCodeGenOnly = 1;
}
+// Like UnaryRI, but expanded after RA depending on the choice of register.
+class UnaryRIPseudo<SDPatternOperator operator, RegisterOperand cls,
+ Immediate imm>
+ : Pseudo<(outs cls:$R1), (ins imm:$I2),
+ [(set cls:$R1, (operator imm:$I2))]>;
+
+// Like UnaryRXY, but expanded after RA depending on the choice of register.
+class UnaryRXYPseudo<string key, SDPatternOperator operator,
+ RegisterOperand cls, bits<5> bytes,
+ AddressingMode mode = bdxaddr20only>
+ : Pseudo<(outs cls:$R1), (ins mode:$XBD2),
+ [(set cls:$R1, (operator mode:$XBD2))]> {
+ let OpKey = key ## cls;
+ let OpType = "mem";
+ let mayLoad = 1;
+ let Has20BitOffset = 1;
+ let HasIndex = 1;
+ let AccessBytes = bytes;
+}
+
+// Like UnaryRR, but expanded after RA depending on the choice of registers.
+class UnaryRRPseudo<string key, SDPatternOperator operator,
+ RegisterOperand cls1, RegisterOperand cls2>
+ : Pseudo<(outs cls1:$R1), (ins cls2:$R2),
+ [(set cls1:$R1, (operator cls2:$R2))]> {
+ let OpKey = key ## cls1;
+ let OpType = "reg";
+}
+
+// Like BinaryRI, but expanded after RA depending on the choice of register.
+class BinaryRIPseudo<SDPatternOperator operator, RegisterOperand cls,
+ Immediate imm>
+ : Pseudo<(outs cls:$R1), (ins cls:$R1src, imm:$I2),
+ [(set cls:$R1, (operator cls:$R1src, imm:$I2))]> {
+ let Constraints = "$R1 = $R1src";
+}
+
+// Like BinaryRIE, but expanded after RA depending on the choice of register.
+class BinaryRIEPseudo<SDPatternOperator operator, RegisterOperand cls,
+ Immediate imm>
+ : Pseudo<(outs cls:$R1), (ins cls:$R3, imm:$I2),
+ [(set cls:$R1, (operator cls:$R3, imm:$I2))]>;
+
+// Like BinaryRIAndK, but expanded after RA depending on the choice of register.
+multiclass BinaryRIAndKPseudo<string key, SDPatternOperator operator,
+ RegisterOperand cls, Immediate imm> {
+ let NumOpsKey = key in {
+ let NumOpsValue = "3" in
+ def K : BinaryRIEPseudo<null_frag, cls, imm>,
+ Requires<[FeatureHighWord, FeatureDistinctOps]>;
+ let NumOpsValue = "2", isConvertibleToThreeAddress = 1 in
+ def "" : BinaryRIPseudo<operator, cls, imm>,
+ Requires<[FeatureHighWord]>;
+ }
+}
+
+// Like CompareRI, but expanded after RA depending on the choice of register.
+class CompareRIPseudo<SDPatternOperator operator, RegisterOperand cls,
+ Immediate imm>
+ : Pseudo<(outs), (ins cls:$R1, imm:$I2), [(operator cls:$R1, imm:$I2)]>;
+
+// Like CompareRXY, but expanded after RA depending on the choice of register.
+class CompareRXYPseudo<SDPatternOperator operator, RegisterOperand cls,
+ SDPatternOperator load, bits<5> bytes,
+ AddressingMode mode = bdxaddr20only>
+ : Pseudo<(outs), (ins cls:$R1, mode:$XBD2),
+ [(operator cls:$R1, (load mode:$XBD2))]> {
+ let mayLoad = 1;
+ let Has20BitOffset = 1;
+ let HasIndex = 1;
+ let AccessBytes = bytes;
+}
+
+// Like StoreRXY, but expanded after RA depending on the choice of register.
+class StoreRXYPseudo<SDPatternOperator operator, RegisterOperand cls,
+ bits<5> bytes, AddressingMode mode = bdxaddr20only>
+ : Pseudo<(outs), (ins cls:$R1, mode:$XBD2),
+ [(operator cls:$R1, mode:$XBD2)]> {
+ let mayStore = 1;
+ let Has20BitOffset = 1;
+ let HasIndex = 1;
+ let AccessBytes = bytes;
+}
+
+// Like RotateSelectRIEf, but expanded after RA depending on the choice
+// of registers.
+class RotateSelectRIEfPseudo<RegisterOperand cls1, RegisterOperand cls2>
+ : Pseudo<(outs cls1:$R1),
+ (ins cls1:$R1src, cls2:$R2, imm32zx8:$I3, imm32zx8:$I4,
+ imm32zx6:$I5),
+ []> {
+ let Constraints = "$R1 = $R1src";
+ let DisableEncoding = "$R1src";
+}
+
// Implements "$dst = $cc & (8 >> CC) ? $src1 : $src2", where CC is
// the value of the PSW's 2-bit condition code field.
class SelectWrapper<RegisterOperand cls>
: Pseudo<(outs cls:$dst),
- (ins cls:$src1, cls:$src2, uimm8zx4:$valid, uimm8zx4:$cc),
+ (ins cls:$src1, cls:$src2, imm32zx4:$valid, imm32zx4:$cc),
[(set cls:$dst, (z_select_ccmask cls:$src1, cls:$src2,
- uimm8zx4:$valid, uimm8zx4:$cc))]> {
+ imm32zx4:$valid, imm32zx4:$cc))]> {
let usesCustomInserter = 1;
// Although the instructions used by these nodes do not in themselves
// change CC, the insertion requires new blocks, and CC cannot be live
SDPatternOperator load, AddressingMode mode> {
let Defs = [CC], Uses = [CC], usesCustomInserter = 1 in {
def "" : Pseudo<(outs),
- (ins cls:$new, mode:$addr, uimm8zx4:$valid, uimm8zx4:$cc),
+ (ins cls:$new, mode:$addr, imm32zx4:$valid, imm32zx4:$cc),
[(store (z_select_ccmask cls:$new, (load mode:$addr),
- uimm8zx4:$valid, uimm8zx4:$cc),
+ imm32zx4:$valid, imm32zx4:$cc),
mode:$addr)]>;
def Inv : Pseudo<(outs),
- (ins cls:$new, mode:$addr, uimm8zx4:$valid, uimm8zx4:$cc),
+ (ins cls:$new, mode:$addr, imm32zx4:$valid, imm32zx4:$cc),
[(store (z_select_ccmask (load mode:$addr), cls:$new,
- uimm8zx4:$valid, uimm8zx4:$cc),
+ imm32zx4:$valid, imm32zx4:$cc),
mode:$addr)]>;
}
}
: AtomicLoadWBinary<operator, (i32 GR32:$src2), GR32>;
class AtomicLoadWBinaryImm<SDPatternOperator operator, Immediate imm>
: AtomicLoadWBinary<operator, (i32 imm:$src2), imm>;
+
+// Define an instruction that operates on two fixed-length blocks of memory,
+// and associated pseudo instructions for operating on blocks of any size.
+// The Sequence form uses a straight-line sequence of instructions and
+// the Loop form uses a loop of length-256 instructions followed by
+// another instruction to handle the excess.
+multiclass MemorySS<string mnemonic, bits<8> opcode,
+ SDPatternOperator sequence, SDPatternOperator loop> {
+ def "" : InstSS<opcode, (outs), (ins bdladdr12onlylen8:$BDL1,
+ bdaddr12only:$BD2),
+ mnemonic##"\t$BDL1, $BD2", []>;
+ let usesCustomInserter = 1 in {
+ def Sequence : Pseudo<(outs), (ins bdaddr12only:$dest, bdaddr12only:$src,
+ imm64:$length),
+ [(sequence bdaddr12only:$dest, bdaddr12only:$src,
+ imm64:$length)]>;
+ def Loop : Pseudo<(outs), (ins bdaddr12only:$dest, bdaddr12only:$src,
+ imm64:$length, GR64:$count256),
+ [(loop bdaddr12only:$dest, bdaddr12only:$src,
+ imm64:$length, GR64:$count256)]>;
+ }
+}
+
+// Define an instruction that operates on two strings, both terminated
+// by the character in R0. The instruction processes a CPU-determinated
+// number of bytes at a time and sets CC to 3 if the instruction needs
+// to be repeated. Also define a pseudo instruction that represents
+// the full loop (the main instruction plus the branch on CC==3).
+multiclass StringRRE<string mnemonic, bits<16> opcode,
+ SDPatternOperator operator> {
+ def "" : InstRRE<opcode, (outs GR64:$R1, GR64:$R2),
+ (ins GR64:$R1src, GR64:$R2src),
+ mnemonic#"\t$R1, $R2", []> {
+ let Constraints = "$R1 = $R1src, $R2 = $R2src";
+ let DisableEncoding = "$R1src, $R2src";
+ }
+ let usesCustomInserter = 1 in
+ def Loop : Pseudo<(outs GR64:$end),
+ (ins GR64:$start1, GR64:$start2, GR32:$char),
+ [(set GR64:$end, (operator GR64:$start1, GR64:$start2,
+ GR32:$char))]>;
+}
+
+// A pseudo instruction that is a direct alias of a real instruction.
+// These aliases are used in cases where a particular register operand is
+// fixed or where the same instruction is used with different register sizes.
+// The size parameter is the size in bytes of the associated real instruction.
+class Alias<int size, dag outs, dag ins, list<dag> pattern>
+ : InstSystemZ<size, outs, ins, "", pattern> {
+ let isPseudo = 1;
+ let isCodeGenOnly = 1;
+}
+
+// An alias of a BinaryRI, but with different register sizes.
+class BinaryAliasRI<SDPatternOperator operator, RegisterOperand cls,
+ Immediate imm>
+ : Alias<4, (outs cls:$R1), (ins cls:$R1src, imm:$I2),
+ [(set cls:$R1, (operator cls:$R1src, imm:$I2))]> {
+ let Constraints = "$R1 = $R1src";
+}
+
+// An alias of a BinaryRIL, but with different register sizes.
+class BinaryAliasRIL<SDPatternOperator operator, RegisterOperand cls,
+ Immediate imm>
+ : Alias<6, (outs cls:$R1), (ins cls:$R1src, imm:$I2),
+ [(set cls:$R1, (operator cls:$R1src, imm:$I2))]> {
+ let Constraints = "$R1 = $R1src";
+}
+
+// An alias of a CompareRI, but with different register sizes.
+class CompareAliasRI<SDPatternOperator operator, RegisterOperand cls,
+ Immediate imm>
+ : Alias<4, (outs), (ins cls:$R1, imm:$I2), [(operator cls:$R1, imm:$I2)]> {
+ let isCompare = 1;
+}
+
+// An alias of a RotateSelectRIEf, but with different register sizes.
+class RotateSelectAliasRIEf<RegisterOperand cls1, RegisterOperand cls2>
+ : Alias<6, (outs cls1:$R1),
+ (ins cls1:$R1src, cls2:$R2, imm32zx8:$I3, imm32zx8:$I4,
+ imm32zx6:$I5), []> {
+ let Constraints = "$R1 = $R1src";
+}