}
// Return the register enum Based on RegClass and the raw register number.
-// For DRegPair, see comments below.
// FIXME: Auto-gened?
-static unsigned getRegisterEnum(BO B, unsigned RegClassID, unsigned RawRegister,
- bool DRegPair = false) {
-
- if (DRegPair && RegClassID == ARM::QPRRegClassID) {
- // LLVM expects { Dd, Dd+1 } to form a super register; this is not specified
- // in the ARM Architecture Manual as far as I understand it (A8.6.307).
- // Therefore, we morph the RegClassID to be the sub register class and don't
- // subsequently transform the RawRegister encoding when calculating RegNum.
- //
- // See also ARMinstPrinter::printOperand() wrt "dregpair" modifier part
- // where this workaround is meant for.
- RegClassID = ARM::DPRRegClassID;
- }
-
+static unsigned
+getRegisterEnum(BO B, unsigned RegClassID, unsigned RawRegister) {
// For this purpose, we can treat rGPR as if it were GPR.
if (RegClassID == ARM::rGPRRegClassID) RegClassID = ARM::GPRRegClassID;
//
// A8-11: DecodeImmShift()
static inline void getImmShiftSE(ARM_AM::ShiftOpc &ShOp, unsigned &ShImm) {
- // If type == 0b11 and imm5 == 0, we have an rrx, instead.
- if (ShOp == ARM_AM::ror && ShImm == 0)
- ShOp = ARM_AM::rrx;
- // If (lsr or asr) and imm5 == 0, shift amount is 32.
- if ((ShOp == ARM_AM::lsr || ShOp == ARM_AM::asr) && ShImm == 0)
+ if (ShImm != 0)
+ return;
+ switch (ShOp) {
+ case ARM_AM::no_shift:
+ case ARM_AM::rrx:
+ break;
+ case ARM_AM::lsl:
+ ShOp = ARM_AM::no_shift;
+ break;
+ case ARM_AM::lsr:
+ case ARM_AM::asr:
ShImm = 32;
+ break;
+ case ARM_AM::ror:
+ ShOp = ARM_AM::rrx;
+ break;
+ }
}
// getAMSubModeForBits - getAMSubModeForBits translates from the ARM encoding
// MSR/MSRsys: Rm mask=Inst{19-16}
// BXJ: Rm
// MSRi/MSRsysi: so_imm
-// SRSW/SRS: addrmode4:$addr mode_imm
-// RFEW/RFE: addrmode4:$addr Rn
+// SRSW/SRS: ldstm_mode:$amode mode_imm
+// RFEW/RFE: ldstm_mode:$amode Rn
static bool DisassembleBrFrm(MCInst &MI, unsigned Opcode, uint32_t insn,
unsigned short NumOps, unsigned &NumOpsAdded, BO B) {
NumOpsAdded = 2;
return true;
}
- // SRSW and SRS requires addrmode4:$addr for ${addr:submode}, followed by the
- // mode immediate (Inst{4-0}).
if (Opcode == ARM::SRSW || Opcode == ARM::SRS ||
Opcode == ARM::RFEW || Opcode == ARM::RFE) {
- // ARMInstPrinter::printAddrMode4Operand() prints special mode string
- // if the base register is SP; so don't set ARM::SP.
- MI.addOperand(MCOperand::CreateReg(0));
ARM_AM::AMSubMode SubMode = getAMSubModeForBits(getPUBits(insn));
MI.addOperand(MCOperand::CreateImm(ARM_AM::getAM4ModeImm(SubMode)));
}
// Misc. Branch Instructions.
-// BR_JTadd, BR_JTr, BR_JTm
// BLXr9, BXr9
-// BRIND, BX_RET
+// BX, BX_RET
static bool DisassembleBrMiscFrm(MCInst &MI, unsigned Opcode, uint32_t insn,
unsigned short NumOps, unsigned &NumOpsAdded, BO B) {
if (Opcode == ARM::BX_RET)
return true;
- // BLXr9 and BRIND take one GPR reg.
- if (Opcode == ARM::BLXr9 || Opcode == ARM::BRIND) {
+ // BLXr9 and BX take one GPR reg.
+ if (Opcode == ARM::BLXr9 || Opcode == ARM::BX) {
assert(NumOps >= 1 && OpInfo[OpIdx].RegClass == ARM::GPRRegClassID &&
"Reg operand expected");
MI.addOperand(MCOperand::CreateReg(getRegisterEnum(B, ARM::GPRRegClassID,
return true;
}
- // BR_JTadd is an ADD with Rd = PC, (Rn, Rm) as the target and index regs.
- if (Opcode == ARM::BR_JTadd) {
- // InOperandList with GPR:$target and GPR:$idx regs.
-
- assert(NumOps == 4 && "Expect 4 operands");
- MI.addOperand(MCOperand::CreateReg(getRegisterEnum(B, ARM::GPRRegClassID,
- decodeRn(insn))));
- MI.addOperand(MCOperand::CreateReg(getRegisterEnum(B, ARM::GPRRegClassID,
- decodeRm(insn))));
-
- // Fill in the two remaining imm operands to signify build completion.
- MI.addOperand(MCOperand::CreateImm(0));
- MI.addOperand(MCOperand::CreateImm(0));
-
- OpIdx = 4;
- return true;
- }
-
- // BR_JTr is a MOV with Rd = PC, and Rm as the source register.
- if (Opcode == ARM::BR_JTr) {
- // InOperandList with GPR::$target reg.
-
- assert(NumOps == 3 && "Expect 3 operands");
- MI.addOperand(MCOperand::CreateReg(getRegisterEnum(B, ARM::GPRRegClassID,
- decodeRm(insn))));
-
- // Fill in the two remaining imm operands to signify build completion.
- MI.addOperand(MCOperand::CreateImm(0));
- MI.addOperand(MCOperand::CreateImm(0));
-
- OpIdx = 3;
- return true;
- }
-
- // BR_JTm is an LDR with Rt = PC.
- if (Opcode == ARM::BR_JTm) {
- // This is the reg/reg form, with base reg followed by +/- reg shop imm.
- // See also ARMAddressingModes.h (Addressing Mode #2).
-
- assert(NumOps == 5 && getIBit(insn) == 1 && "Expect 5 operands && I-bit=1");
- MI.addOperand(MCOperand::CreateReg(getRegisterEnum(B, ARM::GPRRegClassID,
- decodeRn(insn))));
-
- ARM_AM::AddrOpc AddrOpcode = getUBit(insn) ? ARM_AM::add : ARM_AM::sub;
-
- // Disassemble the offset reg (Rm), shift type, and immediate shift length.
- MI.addOperand(MCOperand::CreateReg(getRegisterEnum(B, ARM::GPRRegClassID,
- decodeRm(insn))));
- // Inst{6-5} encodes the shift opcode.
- ARM_AM::ShiftOpc ShOp = getShiftOpcForBits(slice(insn, 6, 5));
- // Inst{11-7} encodes the imm5 shift amount.
- unsigned ShImm = slice(insn, 11, 7);
-
- // A8.4.1. Possible rrx or shift amount of 32...
- getImmShiftSE(ShOp, ShImm);
- MI.addOperand(MCOperand::CreateImm(
- ARM_AM::getAM2Opc(AddrOpcode, ShImm, ShOp)));
-
- // Fill in the two remaining imm operands to signify build completion.
- MI.addOperand(MCOperand::CreateImm(0));
- MI.addOperand(MCOperand::CreateImm(0));
-
- OpIdx = 5;
- return true;
- }
-
return false;
}
unsigned short NumOps, unsigned &NumOpsAdded, BO B) {
assert(NumOps >= 5 && "LdStMulFrm expects NumOps >= 5");
-
- unsigned &OpIdx = NumOpsAdded;
-
- OpIdx = 0;
+ NumOpsAdded = 0;
unsigned Base = getRegisterEnum(B, ARM::GPRRegClassID, decodeRn(insn));
// Writeback to base, if necessary.
- if (Opcode == ARM::LDM_UPD || Opcode == ARM::STM_UPD) {
+ if (Opcode == ARM::LDMIA_UPD || Opcode == ARM::STMIA_UPD ||
+ Opcode == ARM::LDMDA_UPD || Opcode == ARM::STMDA_UPD ||
+ Opcode == ARM::LDMDB_UPD || Opcode == ARM::STMDB_UPD ||
+ Opcode == ARM::LDMIB_UPD || Opcode == ARM::STMIB_UPD) {
MI.addOperand(MCOperand::CreateReg(Base));
- ++OpIdx;
+ ++NumOpsAdded;
}
+ // Add the base register operand.
MI.addOperand(MCOperand::CreateReg(Base));
- ARM_AM::AMSubMode SubMode = getAMSubModeForBits(getPUBits(insn));
- MI.addOperand(MCOperand::CreateImm(ARM_AM::getAM4ModeImm(SubMode)));
-
// Handling the two predicate operands before the reglist.
int64_t CondVal = insn >> ARMII::CondShift;
MI.addOperand(MCOperand::CreateImm(CondVal == 0xF ? 0xE : CondVal));
MI.addOperand(MCOperand::CreateReg(ARM::CPSR));
- OpIdx += 4;
+ NumOpsAdded += 3;
// Fill the variadic part of reglist.
unsigned RegListBits = insn & ((1 << 16) - 1);
if ((RegListBits >> i) & 1) {
MI.addOperand(MCOperand::CreateReg(getRegisterEnum(B, ARM::GPRRegClassID,
i)));
- ++OpIdx;
+ ++NumOpsAdded;
}
}
&& !OpInfo[OpIdx].isPredicate() && !OpInfo[OpIdx].isOptionalDef()) {
// Extract the 5-bit immediate field Inst{11-7}.
unsigned ShiftAmt = (insn >> ARMII::ShiftShift) & 0x1F;
- MI.addOperand(MCOperand::CreateImm(ShiftAmt));
+ ARM_AM::ShiftOpc Opc = ARM_AM::no_shift;
+ if (Opcode == ARM::PKHBT)
+ Opc = ARM_AM::lsl;
+ else if (Opcode == ARM::PKHBT)
+ Opc = ARM_AM::asr;
+ getImmShiftSE(Opc, ShiftAmt);
+ MI.addOperand(MCOperand::CreateImm(ARM_AM::getSORegOpc(Opc, ShiftAmt)));
++OpIdx;
}
}
// A7.5.1
-#if 0
-static uint64_t VFPExpandImm(unsigned char byte, unsigned N) {
+static APInt VFPExpandImm(unsigned char byte, unsigned N) {
assert(N == 32 || N == 64);
uint64_t Result;
Result = (uint64_t)slice(byte, 7, 7) << 63 |
(uint64_t)slice(byte, 5, 0) << 48;
if (bit6)
- Result |= 0xffL << 54;
+ Result |= 0xffULL << 54;
else
- Result |= 0x1L << 62;
+ Result |= 0x1ULL << 62;
}
- return Result;
+ return APInt(N, Result);
}
-#endif
// VFP Unary Format Instructions:
//
assert(NumOps >= 3 && "VFPLdStFrm expects NumOps >= 3");
- bool isSPVFP = (Opcode == ARM::VLDRS || Opcode == ARM::VSTRS) ? true : false;
+ bool isSPVFP = (Opcode == ARM::VLDRS || Opcode == ARM::VSTRS);
unsigned RegClassID = isSPVFP ? ARM::SPRRegClassID : ARM::DPRRegClassID;
// Extract Dd/Sd for operand 0.
// VFP Load/Store Multiple Instructions.
// This is similar to the algorithm for LDM/STM in that operand 0 (the base) and
-// operand 1 (the AM5 mode imm) is followed by two predicate operands. It is
+// operand 1 (the AM4 mode imm) is followed by two predicate operands. It is
// followed by a reglist of either DPR(s) or SPR(s).
//
// VLDMD[_UPD], VLDMS[_UPD], VSTMD[_UPD], VSTMS[_UPD]
unsigned Base = getRegisterEnum(B, ARM::GPRRegClassID, decodeRn(insn));
// Writeback to base, if necessary.
- if (Opcode == ARM::VLDMD_UPD || Opcode == ARM::VLDMS_UPD ||
- Opcode == ARM::VSTMD_UPD || Opcode == ARM::VSTMS_UPD) {
+ if (Opcode == ARM::VLDMDIA_UPD || Opcode == ARM::VLDMSIA_UPD ||
+ Opcode == ARM::VLDMDDB_UPD || Opcode == ARM::VLDMSDB_UPD ||
+ Opcode == ARM::VSTMDIA_UPD || Opcode == ARM::VSTMSIA_UPD ||
+ Opcode == ARM::VSTMDDB_UPD || Opcode == ARM::VSTMSDB_UPD) {
MI.addOperand(MCOperand::CreateReg(Base));
++OpIdx;
}
MI.addOperand(MCOperand::CreateReg(Base));
- // Next comes the AM5 Opcode.
+ // Next comes the AM4 Opcode.
ARM_AM::AMSubMode SubMode = getAMSubModeForBits(getPUBits(insn));
// Must be either "ia" or "db" submode.
if (SubMode != ARM_AM::ia && SubMode != ARM_AM::db) {
- DEBUG(errs() << "Illegal addressing mode 5 sub-mode!\n");
+ DEBUG(errs() << "Illegal addressing mode 4 sub-mode!\n");
return false;
}
-
- unsigned char Imm8 = insn & 0xFF;
- MI.addOperand(MCOperand::CreateImm(ARM_AM::getAM5Opc(SubMode, Imm8)));
+ MI.addOperand(MCOperand::CreateImm(ARM_AM::getAM4ModeImm(SubMode)));
// Handling the two predicate operands before the reglist.
int64_t CondVal = insn >> ARMII::CondShift;
OpIdx += 4;
- bool isSPVFP = (Opcode == ARM::VLDMS || Opcode == ARM::VLDMS_UPD ||
- Opcode == ARM::VSTMS || Opcode == ARM::VSTMS_UPD) ? true : false;
+ bool isSPVFP = (Opcode == ARM::VLDMSIA || Opcode == ARM::VLDMSDB ||
+ Opcode == ARM::VLDMSIA_UPD || Opcode == ARM::VLDMSDB_UPD ||
+ Opcode == ARM::VSTMSIA || Opcode == ARM::VSTMSDB ||
+ Opcode == ARM::VSTMSIA_UPD || Opcode == ARM::VSTMSDB_UPD);
unsigned RegClassID = isSPVFP ? ARM::SPRRegClassID : ARM::DPRRegClassID;
// Extract Dd/Sd.
unsigned RegD = decodeVFPRd(insn, isSPVFP);
// Fill the variadic part of reglist.
+ unsigned char Imm8 = insn & 0xFF;
unsigned Regs = isSPVFP ? Imm8 : Imm8/2;
for (unsigned i = 0; i < Regs; ++i) {
MI.addOperand(MCOperand::CreateReg(getRegisterEnum(B, RegClassID,
// Extract/decode the f64/f32 immediate.
if (OpIdx < NumOps && OpInfo[OpIdx].RegClass < 0
&& !OpInfo[OpIdx].isPredicate() && !OpInfo[OpIdx].isOptionalDef()) {
- // The asm syntax specifies the before-expanded <imm>.
- // Not VFPExpandImm(slice(insn,19,16) << 4 | slice(insn, 3, 0),
- // Opcode == ARM::FCONSTD ? 64 : 32)
- MI.addOperand(MCOperand::CreateImm(slice(insn,19,16)<<4 | slice(insn,3,0)));
+ // The asm syntax specifies the floating point value, not the 8-bit literal.
+ APInt immRaw = VFPExpandImm(slice(insn,19,16) << 4 | slice(insn, 3, 0),
+ Opcode == ARM::FCONSTD ? 64 : 32);
+ APFloat immFP = APFloat(immRaw, true);
+ double imm = Opcode == ARM::FCONSTD ? immFP.convertToDouble() :
+ immFP.convertToFloat();
+ MI.addOperand(MCOperand::CreateFPImm(imm));
+
++OpIdx;
}
return (insn >> 8) & 0xF;
}
-static bool UseDRegPair(unsigned Opcode) {
- switch (Opcode) {
- default:
- return false;
- case ARM::VLD1q8_UPD:
- case ARM::VLD1q16_UPD:
- case ARM::VLD1q32_UPD:
- case ARM::VLD1q64_UPD:
- case ARM::VST1q8_UPD:
- case ARM::VST1q16_UPD:
- case ARM::VST1q32_UPD:
- case ARM::VST1q64_UPD:
- return true;
- }
-}
-
// VLD*
// D[d] D[d2] ... Rn [TIED_TO Rn] align [Rm]
// VLD*LN*
// We have homogeneous NEON registers for Load/Store.
unsigned RegClass = 0;
- bool DRegPair = UseDRegPair(Opcode);
// Double-spaced registers have increments of 2.
- unsigned Inc = (DblSpaced || DRegPair) ? 2 : 1;
+ unsigned Inc = DblSpaced ? 2 : 1;
unsigned Rn = decodeRn(insn);
unsigned Rm = decodeRm(insn);
RegClass = OpInfo[OpIdx].RegClass;
while (OpIdx < NumOps && (unsigned)OpInfo[OpIdx].RegClass == RegClass) {
MI.addOperand(MCOperand::CreateReg(
- getRegisterEnum(B, RegClass, Rd, DRegPair)));
+ getRegisterEnum(B, RegClass, Rd)));
Rd += Inc;
++OpIdx;
}
while (OpIdx < NumOps && (unsigned)OpInfo[OpIdx].RegClass == RegClass) {
MI.addOperand(MCOperand::CreateReg(
- getRegisterEnum(B, RegClass, Rd, DRegPair)));
+ getRegisterEnum(B, RegClass, Rd)));
Rd += Inc;
++OpIdx;
}
return DisassembleNVdVnVmOptImm(MI, Opcode, insn, NumOps, NumOpsAdded,
N3V_VectorShift, B);
}
-static bool DisassembleNVecExtractFrm(MCInst &MI, unsigned Opcode, uint32_t insn,
- unsigned short NumOps, unsigned &NumOpsAdded, BO B) {
+static bool DisassembleNVecExtractFrm(MCInst &MI, unsigned Opcode,
+ uint32_t insn, unsigned short NumOps, unsigned &NumOpsAdded, BO B) {
return DisassembleNVdVnVmOptImm(MI, Opcode, insn, NumOps, NumOpsAdded,
N3V_VectorExtract, B);
// A8.6.49 ISB
static inline bool MemBarrierInstr(uint32_t insn) {
unsigned op7_4 = slice(insn, 7, 4);
- if (slice(insn, 31, 20) == 0xf57 && (op7_4 >= 4 && op7_4 <= 6))
+ if (slice(insn, 31, 8) == 0xf57ff0 && (op7_4 >= 4 && op7_4 <= 6))
return true;
return false;
static inline bool PreLoadOpcode(unsigned Opcode) {
switch(Opcode) {
- case ARM::PLDi: case ARM::PLDr:
- case ARM::PLDWi: case ARM::PLDWr:
- case ARM::PLIi: case ARM::PLIr:
+ case ARM::PLDi12: case ARM::PLDrs:
+ case ARM::PLDWi12: case ARM::PLDWrs:
+ case ARM::PLIi12: case ARM::PLIrs:
return true;
default:
return false;
static bool DisassemblePreLoadFrm(MCInst &MI, unsigned Opcode, uint32_t insn,
unsigned short NumOps, unsigned &NumOpsAdded, BO B) {
- // Preload Data/Instruction requires either 2 or 4 operands.
- // PLDi, PLDWi, PLIi: Rn [+/-]imm12 add = (U == '1')
- // PLDr[a|m], PLDWr[a|m], PLIr[a|m]: Rn Rm addrmode2_opc
+ // Preload Data/Instruction requires either 2 or 3 operands.
+ // PLDi, PLDWi, PLIi: addrmode_imm12
+ // PLDr[a|m], PLDWr[a|m], PLIr[a|m]: ldst_so_reg
MI.addOperand(MCOperand::CreateReg(getRegisterEnum(B, ARM::GPRRegClassID,
decodeRn(insn))));
- if (Opcode == ARM::PLDi || Opcode == ARM::PLDWi || Opcode == ARM::PLIi) {
+ if (Opcode == ARM::PLDi12 || Opcode == ARM::PLDWi12
+ || Opcode == ARM::PLIi12) {
unsigned Imm12 = slice(insn, 11, 0);
bool Negative = getUBit(insn) == 0;
- int Offset = Negative ? -1 - Imm12 : 1 * Imm12;
- MI.addOperand(MCOperand::CreateImm(Offset));
+ // -0 is represented specially. All other values are as normal.
+ if (Imm12 == 0 && Negative)
+ Imm12 = INT32_MIN;
+ MI.addOperand(MCOperand::CreateImm(Imm12));
NumOpsAdded = 2;
} else {
MI.addOperand(MCOperand::CreateReg(getRegisterEnum(B, ARM::GPRRegClassID,
static bool DisassembleMiscFrm(MCInst &MI, unsigned Opcode, uint32_t insn,
unsigned short NumOps, unsigned &NumOpsAdded, BO B) {
- if (MemBarrierInstr(insn))
+ if (MemBarrierInstr(insn)) {
+ // DMBsy, DSBsy, and ISBsy instructions have zero operand and are taken care
+ // of within the generic ARMBasicMCBuilder::BuildIt() method.
+ //
+ // Inst{3-0} encodes the memory barrier option for the variants.
+ MI.addOperand(MCOperand::CreateImm(slice(insn, 3, 0)));
+ NumOpsAdded = 1;
return true;
+ }
switch (Opcode) {
case ARM::CLREX:
case ARM::WFE:
case ARM::WFI:
case ARM::SEV:
- case ARM::SETENDBE:
- case ARM::SETENDLE:
return true;
default:
break;
}
+ if (Opcode == ARM::SETEND) {
+ NumOpsAdded = 1;
+ MI.addOperand(MCOperand::CreateImm(slice(insn, 9, 9)));
+ return true;
+ }
+
// CPS has a singleton $opt operand that contains the following information:
// opt{4-0} = mode from Inst{4-0}
// opt{5} = changemode from Inst{17}
projects / oota-llvm.git / blobdiff