//
//===----------------------------------------------------------------------===//
-#define DEBUG_TYPE "regalloc"
#include "llvm/CodeGen/LiveIntervalAnalysis.h"
-#include "llvm/Value.h"
+#include "LiveRangeCalc.h"
+#include "llvm/ADT/DenseSet.h"
+#include "llvm/ADT/STLExtras.h"
#include "llvm/Analysis/AliasAnalysis.h"
#include "llvm/CodeGen/LiveVariables.h"
+#include "llvm/CodeGen/MachineBlockFrequencyInfo.h"
#include "llvm/CodeGen/MachineDominators.h"
#include "llvm/CodeGen/MachineInstr.h"
#include "llvm/CodeGen/MachineRegisterInfo.h"
#include "llvm/CodeGen/Passes.h"
-#include "llvm/Target/TargetRegisterInfo.h"
-#include "llvm/Target/TargetInstrInfo.h"
-#include "llvm/Target/TargetMachine.h"
+#include "llvm/CodeGen/VirtRegMap.h"
+#include "llvm/IR/Value.h"
+#include "llvm/Support/BlockFrequency.h"
#include "llvm/Support/CommandLine.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/ErrorHandling.h"
+#include "llvm/Support/Format.h"
#include "llvm/Support/raw_ostream.h"
-#include "llvm/ADT/DenseSet.h"
-#include "llvm/ADT/STLExtras.h"
-#include "LiveRangeCalc.h"
-#include "VirtRegMap.h"
+#include "llvm/Target/TargetInstrInfo.h"
+#include "llvm/Target/TargetRegisterInfo.h"
+#include "llvm/Target/TargetSubtargetInfo.h"
#include <algorithm>
-#include <limits>
#include <cmath>
+#include <limits>
using namespace llvm;
-// Switch to the new experimental algorithm for computing live intervals.
-static cl::opt<bool>
-NewLiveIntervals("new-live-intervals", cl::Hidden,
- cl::desc("Use new algorithm forcomputing live intervals"));
+#define DEBUG_TYPE "regalloc"
char LiveIntervals::ID = 0;
char &llvm::LiveIntervalsID = LiveIntervals::ID;
INITIALIZE_PASS_END(LiveIntervals, "liveintervals",
"Live Interval Analysis", false, false)
+#ifndef NDEBUG
+static cl::opt<bool> EnablePrecomputePhysRegs(
+ "precompute-phys-liveness", cl::Hidden,
+ cl::desc("Eagerly compute live intervals for all physreg units."));
+#else
+static bool EnablePrecomputePhysRegs = false;
+#endif // NDEBUG
+
+static cl::opt<bool> EnableSubRegLiveness(
+ "enable-subreg-liveness", cl::Hidden, cl::init(true),
+ cl::desc("Enable subregister liveness tracking."));
+
+namespace llvm {
+cl::opt<bool> UseSegmentSetForPhysRegs(
+ "use-segment-set-for-physregs", cl::Hidden, cl::init(true),
+ cl::desc(
+ "Use segment set for the computation of the live ranges of physregs."));
+}
+
void LiveIntervals::getAnalysisUsage(AnalysisUsage &AU) const {
AU.setPreservesCFG();
AU.addRequired<AliasAnalysis>();
AU.addPreserved<AliasAnalysis>();
+ // LiveVariables isn't really required by this analysis, it is only required
+ // here to make sure it is live during TwoAddressInstructionPass and
+ // PHIElimination. This is temporary.
AU.addRequired<LiveVariables>();
AU.addPreserved<LiveVariables>();
AU.addPreservedID(MachineLoopInfoID);
}
LiveIntervals::LiveIntervals() : MachineFunctionPass(ID),
- DomTree(0), LRCalc(0) {
+ DomTree(nullptr), LRCalc(nullptr) {
initializeLiveIntervalsPass(*PassRegistry::getPassRegistry());
}
RegMaskBits.clear();
RegMaskBlocks.clear();
- for (unsigned i = 0, e = RegUnitIntervals.size(); i != e; ++i)
- delete RegUnitIntervals[i];
- RegUnitIntervals.clear();
+ for (unsigned i = 0, e = RegUnitRanges.size(); i != e; ++i)
+ delete RegUnitRanges[i];
+ RegUnitRanges.clear();
// Release VNInfo memory regions, VNInfo objects don't need to be dtor'd.
VNInfoAllocator.Reset();
}
-/// runOnMachineFunction - Register allocate the whole function
+/// runOnMachineFunction - calculates LiveIntervals
///
bool LiveIntervals::runOnMachineFunction(MachineFunction &fn) {
MF = &fn;
MRI = &MF->getRegInfo();
- TM = &fn.getTarget();
- TRI = TM->getRegisterInfo();
- TII = TM->getInstrInfo();
+ TRI = MF->getSubtarget().getRegisterInfo();
+ TII = MF->getSubtarget().getInstrInfo();
AA = &getAnalysis<AliasAnalysis>();
- LV = &getAnalysis<LiveVariables>();
Indexes = &getAnalysis<SlotIndexes>();
DomTree = &getAnalysis<MachineDominatorTree>();
+
+ if (EnableSubRegLiveness && MF->getSubtarget().enableSubRegLiveness())
+ MRI->enableSubRegLiveness(true);
+
if (!LRCalc)
LRCalc = new LiveRangeCalc();
// Allocate space for all virtual registers.
VirtRegIntervals.resize(MRI->getNumVirtRegs());
- if (NewLiveIntervals) {
- // This is the new way of computing live intervals.
- // It is independent of LiveVariables, and it can run at any time.
- computeVirtRegs();
- computeRegMasks();
- } else {
- // This is the old way of computing live intervals.
- // It depends on LiveVariables.
- computeIntervals();
- }
+ computeVirtRegs();
+ computeRegMasks();
computeLiveInRegUnits();
+ if (EnablePrecomputePhysRegs) {
+ // For stress testing, precompute live ranges of all physical register
+ // units, including reserved registers.
+ for (unsigned i = 0, e = TRI->getNumRegUnits(); i != e; ++i)
+ getRegUnit(i);
+ }
DEBUG(dump());
return true;
}
OS << "********** INTERVALS **********\n";
// Dump the regunits.
- for (unsigned i = 0, e = RegUnitIntervals.size(); i != e; ++i)
- if (LiveInterval *LI = RegUnitIntervals[i])
- OS << PrintRegUnit(i, TRI) << " = " << *LI << '\n';
+ for (unsigned i = 0, e = RegUnitRanges.size(); i != e; ++i)
+ if (LiveRange *LR = RegUnitRanges[i])
+ OS << PrintRegUnit(i, TRI) << ' ' << *LR << '\n';
// Dump the virtregs.
for (unsigned i = 0, e = MRI->getNumVirtRegs(); i != e; ++i) {
unsigned Reg = TargetRegisterInfo::index2VirtReg(i);
if (hasInterval(Reg))
- OS << PrintReg(Reg) << " = " << getInterval(Reg) << '\n';
+ OS << getInterval(Reg) << '\n';
}
+ OS << "RegMasks:";
+ for (unsigned i = 0, e = RegMaskSlots.size(); i != e; ++i)
+ OS << ' ' << RegMaskSlots[i];
+ OS << '\n';
+
printInstrs(OS);
}
}
#endif
-static
-bool MultipleDefsBySameMI(const MachineInstr &MI, unsigned MOIdx) {
- unsigned Reg = MI.getOperand(MOIdx).getReg();
- for (unsigned i = MOIdx+1, e = MI.getNumOperands(); i < e; ++i) {
- const MachineOperand &MO = MI.getOperand(i);
- if (!MO.isReg())
- continue;
- if (MO.getReg() == Reg && MO.isDef()) {
- assert(MI.getOperand(MOIdx).getSubReg() != MO.getSubReg() &&
- MI.getOperand(MOIdx).getSubReg() &&
- (MO.getSubReg() || MO.isImplicit()));
- return true;
- }
- }
- return false;
-}
-
-/// isPartialRedef - Return true if the specified def at the specific index is
-/// partially re-defining the specified live interval. A common case of this is
-/// a definition of the sub-register.
-bool LiveIntervals::isPartialRedef(SlotIndex MIIdx, MachineOperand &MO,
- LiveInterval &interval) {
- if (!MO.getSubReg() || MO.isEarlyClobber())
- return false;
-
- SlotIndex RedefIndex = MIIdx.getRegSlot();
- const LiveRange *OldLR =
- interval.getLiveRangeContaining(RedefIndex.getRegSlot(true));
- MachineInstr *DefMI = getInstructionFromIndex(OldLR->valno->def);
- if (DefMI != 0) {
- return DefMI->findRegisterDefOperandIdx(interval.reg) != -1;
- }
- return false;
-}
-
-void LiveIntervals::handleVirtualRegisterDef(MachineBasicBlock *mbb,
- MachineBasicBlock::iterator mi,
- SlotIndex MIIdx,
- MachineOperand& MO,
- unsigned MOIdx,
- LiveInterval &interval) {
- DEBUG(dbgs() << "\t\tregister: " << PrintReg(interval.reg, TRI));
-
- // Virtual registers may be defined multiple times (due to phi
- // elimination and 2-addr elimination). Much of what we do only has to be
- // done once for the vreg. We use an empty interval to detect the first
- // time we see a vreg.
- LiveVariables::VarInfo& vi = LV->getVarInfo(interval.reg);
- if (interval.empty()) {
- // Get the Idx of the defining instructions.
- SlotIndex defIndex = MIIdx.getRegSlot(MO.isEarlyClobber());
-
- // Make sure the first definition is not a partial redefinition.
- assert(!MO.readsReg() && "First def cannot also read virtual register "
- "missing <undef> flag?");
-
- VNInfo *ValNo = interval.getNextValue(defIndex, VNInfoAllocator);
- assert(ValNo->id == 0 && "First value in interval is not 0?");
-
- // Loop over all of the blocks that the vreg is defined in. There are
- // two cases we have to handle here. The most common case is a vreg
- // whose lifetime is contained within a basic block. In this case there
- // will be a single kill, in MBB, which comes after the definition.
- if (vi.Kills.size() == 1 && vi.Kills[0]->getParent() == mbb) {
- // FIXME: what about dead vars?
- SlotIndex killIdx;
- if (vi.Kills[0] != mi)
- killIdx = getInstructionIndex(vi.Kills[0]).getRegSlot();
- else
- killIdx = defIndex.getDeadSlot();
-
- // If the kill happens after the definition, we have an intra-block
- // live range.
- if (killIdx > defIndex) {
- assert(vi.AliveBlocks.empty() &&
- "Shouldn't be alive across any blocks!");
- LiveRange LR(defIndex, killIdx, ValNo);
- interval.addRange(LR);
- DEBUG(dbgs() << " +" << LR << "\n");
- return;
- }
- }
-
- // The other case we handle is when a virtual register lives to the end
- // of the defining block, potentially live across some blocks, then is
- // live into some number of blocks, but gets killed. Start by adding a
- // range that goes from this definition to the end of the defining block.
- LiveRange NewLR(defIndex, getMBBEndIdx(mbb), ValNo);
- DEBUG(dbgs() << " +" << NewLR);
- interval.addRange(NewLR);
-
- bool PHIJoin = LV->isPHIJoin(interval.reg);
-
- if (PHIJoin) {
- // A phi join register is killed at the end of the MBB and revived as a
- // new valno in the killing blocks.
- assert(vi.AliveBlocks.empty() && "Phi join can't pass through blocks");
- DEBUG(dbgs() << " phi-join");
- } else {
- // Iterate over all of the blocks that the variable is completely
- // live in, adding [insrtIndex(begin), instrIndex(end)+4) to the
- // live interval.
- for (SparseBitVector<>::iterator I = vi.AliveBlocks.begin(),
- E = vi.AliveBlocks.end(); I != E; ++I) {
- MachineBasicBlock *aliveBlock = MF->getBlockNumbered(*I);
- LiveRange LR(getMBBStartIdx(aliveBlock), getMBBEndIdx(aliveBlock),
- ValNo);
- interval.addRange(LR);
- DEBUG(dbgs() << " +" << LR);
- }
- }
-
- // Finally, this virtual register is live from the start of any killing
- // block to the 'use' slot of the killing instruction.
- for (unsigned i = 0, e = vi.Kills.size(); i != e; ++i) {
- MachineInstr *Kill = vi.Kills[i];
- SlotIndex Start = getMBBStartIdx(Kill->getParent());
- SlotIndex killIdx = getInstructionIndex(Kill).getRegSlot();
-
- // Create interval with one of a NEW value number. Note that this value
- // number isn't actually defined by an instruction, weird huh? :)
- if (PHIJoin) {
- assert(getInstructionFromIndex(Start) == 0 &&
- "PHI def index points at actual instruction.");
- ValNo = interval.getNextValue(Start, VNInfoAllocator);
- }
- LiveRange LR(Start, killIdx, ValNo);
- interval.addRange(LR);
- DEBUG(dbgs() << " +" << LR);
- }
-
- } else {
- if (MultipleDefsBySameMI(*mi, MOIdx))
- // Multiple defs of the same virtual register by the same instruction.
- // e.g. %reg1031:5<def>, %reg1031:6<def> = VLD1q16 %reg1024<kill>, ...
- // This is likely due to elimination of REG_SEQUENCE instructions. Return
- // here since there is nothing to do.
- return;
-
- // If this is the second time we see a virtual register definition, it
- // must be due to phi elimination or two addr elimination. If this is
- // the result of two address elimination, then the vreg is one of the
- // def-and-use register operand.
-
- // It may also be partial redef like this:
- // 80 %reg1041:6<def> = VSHRNv4i16 %reg1034<kill>, 12, pred:14, pred:%reg0
- // 120 %reg1041:5<def> = VSHRNv4i16 %reg1039<kill>, 12, pred:14, pred:%reg0
- bool PartReDef = isPartialRedef(MIIdx, MO, interval);
- if (PartReDef || mi->isRegTiedToUseOperand(MOIdx)) {
- // If this is a two-address definition, then we have already processed
- // the live range. The only problem is that we didn't realize there
- // are actually two values in the live interval. Because of this we
- // need to take the LiveRegion that defines this register and split it
- // into two values.
- SlotIndex RedefIndex = MIIdx.getRegSlot(MO.isEarlyClobber());
-
- const LiveRange *OldLR =
- interval.getLiveRangeContaining(RedefIndex.getRegSlot(true));
- VNInfo *OldValNo = OldLR->valno;
- SlotIndex DefIndex = OldValNo->def.getRegSlot();
-
- // Delete the previous value, which should be short and continuous,
- // because the 2-addr copy must be in the same MBB as the redef.
- interval.removeRange(DefIndex, RedefIndex);
-
- // The new value number (#1) is defined by the instruction we claimed
- // defined value #0.
- VNInfo *ValNo = interval.createValueCopy(OldValNo, VNInfoAllocator);
-
- // Value#0 is now defined by the 2-addr instruction.
- OldValNo->def = RedefIndex;
-
- // Add the new live interval which replaces the range for the input copy.
- LiveRange LR(DefIndex, RedefIndex, ValNo);
- DEBUG(dbgs() << " replace range with " << LR);
- interval.addRange(LR);
-
- // If this redefinition is dead, we need to add a dummy unit live
- // range covering the def slot.
- if (MO.isDead())
- interval.addRange(LiveRange(RedefIndex, RedefIndex.getDeadSlot(),
- OldValNo));
-
- DEBUG(dbgs() << " RESULT: " << interval);
- } else if (LV->isPHIJoin(interval.reg)) {
- // In the case of PHI elimination, each variable definition is only
- // live until the end of the block. We've already taken care of the
- // rest of the live range.
-
- SlotIndex defIndex = MIIdx.getRegSlot();
- if (MO.isEarlyClobber())
- defIndex = MIIdx.getRegSlot(true);
-
- VNInfo *ValNo = interval.getNextValue(defIndex, VNInfoAllocator);
-
- SlotIndex killIndex = getMBBEndIdx(mbb);
- LiveRange LR(defIndex, killIndex, ValNo);
- interval.addRange(LR);
- DEBUG(dbgs() << " phi-join +" << LR);
- } else {
- llvm_unreachable("Multiply defined register");
- }
- }
-
- DEBUG(dbgs() << '\n');
-}
-
-void LiveIntervals::handleRegisterDef(MachineBasicBlock *MBB,
- MachineBasicBlock::iterator MI,
- SlotIndex MIIdx,
- MachineOperand& MO,
- unsigned MOIdx) {
- if (TargetRegisterInfo::isVirtualRegister(MO.getReg()))
- handleVirtualRegisterDef(MBB, MI, MIIdx, MO, MOIdx,
- getOrCreateInterval(MO.getReg()));
-}
-
-/// computeIntervals - computes the live intervals for virtual
-/// registers. for some ordering of the machine instructions [1,N] a
-/// live interval is an interval [i, j) where 1 <= i <= j < N for
-/// which a variable is live
-void LiveIntervals::computeIntervals() {
- DEBUG(dbgs() << "********** COMPUTING LIVE INTERVALS **********\n"
- << "********** Function: " << MF->getName() << '\n');
-
- RegMaskBlocks.resize(MF->getNumBlockIDs());
-
- SmallVector<unsigned, 8> UndefUses;
- for (MachineFunction::iterator MBBI = MF->begin(), E = MF->end();
- MBBI != E; ++MBBI) {
- MachineBasicBlock *MBB = MBBI;
- RegMaskBlocks[MBB->getNumber()].first = RegMaskSlots.size();
-
- if (MBB->empty())
- continue;
-
- // Track the index of the current machine instr.
- SlotIndex MIIndex = getMBBStartIdx(MBB);
- DEBUG(dbgs() << "BB#" << MBB->getNumber()
- << ":\t\t# derived from " << MBB->getName() << "\n");
-
- // Skip over empty initial indices.
- if (getInstructionFromIndex(MIIndex) == 0)
- MIIndex = Indexes->getNextNonNullIndex(MIIndex);
-
- for (MachineBasicBlock::iterator MI = MBB->begin(), miEnd = MBB->end();
- MI != miEnd; ++MI) {
- DEBUG(dbgs() << MIIndex << "\t" << *MI);
- if (MI->isDebugValue())
- continue;
- assert(Indexes->getInstructionFromIndex(MIIndex) == MI &&
- "Lost SlotIndex synchronization");
-
- // Handle defs.
- for (int i = MI->getNumOperands() - 1; i >= 0; --i) {
- MachineOperand &MO = MI->getOperand(i);
-
- // Collect register masks.
- if (MO.isRegMask()) {
- RegMaskSlots.push_back(MIIndex.getRegSlot());
- RegMaskBits.push_back(MO.getRegMask());
- continue;
- }
-
- if (!MO.isReg() || !TargetRegisterInfo::isVirtualRegister(MO.getReg()))
- continue;
-
- // handle register defs - build intervals
- if (MO.isDef())
- handleRegisterDef(MBB, MI, MIIndex, MO, i);
- else if (MO.isUndef())
- UndefUses.push_back(MO.getReg());
- }
-
- // Move to the next instr slot.
- MIIndex = Indexes->getNextNonNullIndex(MIIndex);
- }
-
- // Compute the number of register mask instructions in this block.
- std::pair<unsigned, unsigned> &RMB = RegMaskBlocks[MBB->getNumber()];
- RMB.second = RegMaskSlots.size() - RMB.first;
- }
-
- // Create empty intervals for registers defined by implicit_def's (except
- // for those implicit_def that define values which are liveout of their
- // blocks.
- for (unsigned i = 0, e = UndefUses.size(); i != e; ++i) {
- unsigned UndefReg = UndefUses[i];
- (void)getOrCreateInterval(UndefReg);
- }
-}
-
LiveInterval* LiveIntervals::createInterval(unsigned reg) {
- float Weight = TargetRegisterInfo::isPhysicalRegister(reg) ? HUGE_VALF : 0.0F;
+ float Weight = TargetRegisterInfo::isPhysicalRegister(reg) ?
+ llvm::huge_valf : 0.0F;
return new LiveInterval(reg, Weight);
}
/// computeVirtRegInterval - Compute the live interval of a virtual register,
/// based on defs and uses.
-void LiveIntervals::computeVirtRegInterval(LiveInterval *LI) {
+void LiveIntervals::computeVirtRegInterval(LiveInterval &LI) {
assert(LRCalc && "LRCalc not initialized.");
- assert(LI->empty() && "Should only compute empty intervals.");
+ assert(LI.empty() && "Should only compute empty intervals.");
LRCalc->reset(MF, getSlotIndexes(), DomTree, &getVNInfoAllocator());
- LRCalc->createDeadDefs(LI);
- LRCalc->extendToUses(LI);
+ LRCalc->calculate(LI, MRI->shouldTrackSubRegLiveness(LI.reg));
+ computeDeadValues(LI, nullptr);
}
void LiveIntervals::computeVirtRegs() {
unsigned Reg = TargetRegisterInfo::index2VirtReg(i);
if (MRI->reg_nodbg_empty(Reg))
continue;
- LiveInterval *LI = createInterval(Reg);
- VirtRegIntervals[Reg] = LI;
- computeVirtRegInterval(LI);
+ createAndComputeVirtRegInterval(Reg);
}
}
RMB.first = RegMaskSlots.size();
for (MachineBasicBlock::iterator MI = MBB->begin(), ME = MBB->end();
MI != ME; ++MI)
- for (MIOperands MO(MI); MO.isValid(); ++MO) {
- if (!MO->isRegMask())
+ for (const MachineOperand &MO : MI->operands()) {
+ if (!MO.isRegMask())
continue;
RegMaskSlots.push_back(Indexes->getInstructionIndex(MI).getRegSlot());
- RegMaskBits.push_back(MO->getRegMask());
+ RegMaskBits.push_back(MO.getRegMask());
}
// Compute the number of register mask instructions in this block.
RMB.second = RegMaskSlots.size() - RMB.first;
// interference.
//
-/// computeRegUnitInterval - Compute the live interval of a register unit, based
-/// on the uses and defs of aliasing registers. The interval should be empty,
+/// computeRegUnitInterval - Compute the live range of a register unit, based
+/// on the uses and defs of aliasing registers. The range should be empty,
/// or contain only dead phi-defs from ABI blocks.
-void LiveIntervals::computeRegUnitInterval(LiveInterval *LI) {
- unsigned Unit = LI->reg;
-
+void LiveIntervals::computeRegUnitRange(LiveRange &LR, unsigned Unit) {
assert(LRCalc && "LRCalc not initialized.");
LRCalc->reset(MF, getSlotIndexes(), DomTree, &getVNInfoAllocator());
// idempotent. It is very rare for a register unit to have multiple roots, so
// uniquing super-registers is probably not worthwhile.
for (MCRegUnitRootIterator Roots(Unit, TRI); Roots.isValid(); ++Roots) {
- unsigned Root = *Roots;
- if (!MRI->reg_empty(Root))
- LRCalc->createDeadDefs(LI, Root);
- for (MCSuperRegIterator Supers(Root, TRI); Supers.isValid(); ++Supers) {
+ for (MCSuperRegIterator Supers(*Roots, TRI, /*IncludeSelf=*/true);
+ Supers.isValid(); ++Supers) {
if (!MRI->reg_empty(*Supers))
- LRCalc->createDeadDefs(LI, *Supers);
+ LRCalc->createDeadDefs(LR, *Supers);
}
}
- // Now extend LI to reach all uses.
+ // Now extend LR to reach all uses.
// Ignore uses of reserved registers. We only track defs of those.
for (MCRegUnitRootIterator Roots(Unit, TRI); Roots.isValid(); ++Roots) {
- unsigned Root = *Roots;
- if (!MRI->isReserved(Root) && !MRI->reg_empty(Root))
- LRCalc->extendToUses(LI, Root);
- for (MCSuperRegIterator Supers(Root, TRI); Supers.isValid(); ++Supers) {
+ for (MCSuperRegIterator Supers(*Roots, TRI, /*IncludeSelf=*/true);
+ Supers.isValid(); ++Supers) {
unsigned Reg = *Supers;
if (!MRI->isReserved(Reg) && !MRI->reg_empty(Reg))
- LRCalc->extendToUses(LI, Reg);
+ LRCalc->extendToUses(LR, Reg);
}
}
+
+ // Flush the segment set to the segment vector.
+ if (UseSegmentSetForPhysRegs)
+ LR.flushSegmentSet();
}
/// without a corresponding def when entering the entry block or a landing pad.
///
void LiveIntervals::computeLiveInRegUnits() {
- RegUnitIntervals.resize(TRI->getNumRegUnits());
+ RegUnitRanges.resize(TRI->getNumRegUnits());
DEBUG(dbgs() << "Computing live-in reg-units in ABI blocks.\n");
- // Keep track of the intervals allocated.
- SmallVector<LiveInterval*, 8> NewIntvs;
+ // Keep track of the live range sets allocated.
+ SmallVector<unsigned, 8> NewRanges;
// Check all basic blocks for live-ins.
for (MachineFunction::const_iterator MFI = MF->begin(), MFE = MF->end();
const MachineBasicBlock *MBB = MFI;
// We only care about ABI blocks: Entry + landing pads.
- if ((MFI != MF->begin() && !MBB->isLandingPad()) || MBB->livein_empty())
+ if ((MFI != MF->begin() && !MBB->isEHPad()) || MBB->livein_empty())
continue;
// Create phi-defs at Begin for all live-in registers.
SlotIndex Begin = Indexes->getMBBStartIdx(MBB);
DEBUG(dbgs() << Begin << "\tBB#" << MBB->getNumber());
- for (MachineBasicBlock::livein_iterator LII = MBB->livein_begin(),
- LIE = MBB->livein_end(); LII != LIE; ++LII) {
- for (MCRegUnitIterator Units(*LII, TRI); Units.isValid(); ++Units) {
+ for (unsigned LI : MBB->liveins()) {
+ for (MCRegUnitIterator Units(LI, TRI); Units.isValid(); ++Units) {
unsigned Unit = *Units;
- LiveInterval *Intv = RegUnitIntervals[Unit];
- if (!Intv) {
- Intv = RegUnitIntervals[Unit] = new LiveInterval(Unit, HUGE_VALF);
- NewIntvs.push_back(Intv);
+ LiveRange *LR = RegUnitRanges[Unit];
+ if (!LR) {
+ // Use segment set to speed-up initial computation of the live range.
+ LR = RegUnitRanges[Unit] = new LiveRange(UseSegmentSetForPhysRegs);
+ NewRanges.push_back(Unit);
}
- VNInfo *VNI = Intv->createDeadDef(Begin, getVNInfoAllocator());
+ VNInfo *VNI = LR->createDeadDef(Begin, getVNInfoAllocator());
(void)VNI;
DEBUG(dbgs() << ' ' << PrintRegUnit(Unit, TRI) << '#' << VNI->id);
}
}
DEBUG(dbgs() << '\n');
}
- DEBUG(dbgs() << "Created " << NewIntvs.size() << " new intervals.\n");
+ DEBUG(dbgs() << "Created " << NewRanges.size() << " new intervals.\n");
- // Compute the 'normal' part of the intervals.
- for (unsigned i = 0, e = NewIntvs.size(); i != e; ++i)
- computeRegUnitInterval(NewIntvs[i]);
+ // Compute the 'normal' part of the ranges.
+ for (unsigned i = 0, e = NewRanges.size(); i != e; ++i) {
+ unsigned Unit = NewRanges[i];
+ computeRegUnitRange(*RegUnitRanges[Unit], Unit);
+ }
}
-/// shrinkToUses - After removing some uses of a register, shrink its live
-/// range to just the remaining uses. This method does not compute reaching
-/// defs for new uses, and it doesn't remove dead defs.
-bool LiveIntervals::shrinkToUses(LiveInterval *li,
- SmallVectorImpl<MachineInstr*> *dead) {
- DEBUG(dbgs() << "Shrink: " << *li << '\n');
- assert(TargetRegisterInfo::isVirtualRegister(li->reg)
- && "Can only shrink virtual registers");
- // Find all the values used, including PHI kills.
- SmallVector<std::pair<SlotIndex, VNInfo*>, 16> WorkList;
-
- // Blocks that have already been added to WorkList as live-out.
- SmallPtrSet<MachineBasicBlock*, 16> LiveOut;
-
- // Visit all instructions reading li->reg.
- for (MachineRegisterInfo::reg_iterator I = MRI->reg_begin(li->reg);
- MachineInstr *UseMI = I.skipInstruction();) {
- if (UseMI->isDebugValue() || !UseMI->readsVirtualRegister(li->reg))
- continue;
- SlotIndex Idx = getInstructionIndex(UseMI).getRegSlot();
- LiveRangeQuery LRQ(*li, Idx);
- VNInfo *VNI = LRQ.valueIn();
- if (!VNI) {
- // This shouldn't happen: readsVirtualRegister returns true, but there is
- // no live value. It is likely caused by a target getting <undef> flags
- // wrong.
- DEBUG(dbgs() << Idx << '\t' << *UseMI
- << "Warning: Instr claims to read non-existent value in "
- << *li << '\n');
- continue;
- }
- // Special case: An early-clobber tied operand reads and writes the
- // register one slot early.
- if (VNInfo *DefVNI = LRQ.valueDefined())
- Idx = DefVNI->def;
-
- WorkList.push_back(std::make_pair(Idx, VNI));
- }
-
- // Create a new live interval with only minimal live segments per def.
- LiveInterval NewLI(li->reg, 0);
- for (LiveInterval::vni_iterator I = li->vni_begin(), E = li->vni_end();
- I != E; ++I) {
- VNInfo *VNI = *I;
+static void createSegmentsForValues(LiveRange &LR,
+ iterator_range<LiveInterval::vni_iterator> VNIs) {
+ for (auto VNI : VNIs) {
if (VNI->isUnused())
continue;
- NewLI.addRange(LiveRange(VNI->def, VNI->def.getDeadSlot(), VNI));
+ SlotIndex Def = VNI->def;
+ LR.addSegment(LiveRange::Segment(Def, Def.getDeadSlot(), VNI));
}
+}
+
+typedef SmallVector<std::pair<SlotIndex, VNInfo*>, 16> ShrinkToUsesWorkList;
+static void extendSegmentsToUses(LiveRange &LR, const SlotIndexes &Indexes,
+ ShrinkToUsesWorkList &WorkList,
+ const LiveRange &OldRange) {
// Keep track of the PHIs that are in use.
SmallPtrSet<VNInfo*, 8> UsedPHIs;
+ // Blocks that have already been added to WorkList as live-out.
+ SmallPtrSet<MachineBasicBlock*, 16> LiveOut;
// Extend intervals to reach all uses in WorkList.
while (!WorkList.empty()) {
SlotIndex Idx = WorkList.back().first;
VNInfo *VNI = WorkList.back().second;
WorkList.pop_back();
- const MachineBasicBlock *MBB = getMBBFromIndex(Idx.getPrevSlot());
- SlotIndex BlockStart = getMBBStartIdx(MBB);
+ const MachineBasicBlock *MBB = Indexes.getMBBFromIndex(Idx.getPrevSlot());
+ SlotIndex BlockStart = Indexes.getMBBStartIdx(MBB);
// Extend the live range for VNI to be live at Idx.
- if (VNInfo *ExtVNI = NewLI.extendInBlock(BlockStart, Idx)) {
- (void)ExtVNI;
+ if (VNInfo *ExtVNI = LR.extendInBlock(BlockStart, Idx)) {
assert(ExtVNI == VNI && "Unexpected existing value number");
+ (void)ExtVNI;
// Is this a PHIDef we haven't seen before?
- if (!VNI->isPHIDef() || VNI->def != BlockStart || !UsedPHIs.insert(VNI))
+ if (!VNI->isPHIDef() || VNI->def != BlockStart ||
+ !UsedPHIs.insert(VNI).second)
continue;
// The PHI is live, make sure the predecessors are live-out.
- for (MachineBasicBlock::const_pred_iterator PI = MBB->pred_begin(),
- PE = MBB->pred_end(); PI != PE; ++PI) {
- if (!LiveOut.insert(*PI))
+ for (auto &Pred : MBB->predecessors()) {
+ if (!LiveOut.insert(Pred).second)
continue;
- SlotIndex Stop = getMBBEndIdx(*PI);
+ SlotIndex Stop = Indexes.getMBBEndIdx(Pred);
// A predecessor is not required to have a live-out value for a PHI.
- if (VNInfo *PVNI = li->getVNInfoBefore(Stop))
+ if (VNInfo *PVNI = OldRange.getVNInfoBefore(Stop))
WorkList.push_back(std::make_pair(Stop, PVNI));
}
continue;
// VNI is live-in to MBB.
DEBUG(dbgs() << " live-in at " << BlockStart << '\n');
- NewLI.addRange(LiveRange(BlockStart, Idx, VNI));
+ LR.addSegment(LiveRange::Segment(BlockStart, Idx, VNI));
// Make sure VNI is live-out from the predecessors.
- for (MachineBasicBlock::const_pred_iterator PI = MBB->pred_begin(),
- PE = MBB->pred_end(); PI != PE; ++PI) {
- if (!LiveOut.insert(*PI))
+ for (auto &Pred : MBB->predecessors()) {
+ if (!LiveOut.insert(Pred).second)
continue;
- SlotIndex Stop = getMBBEndIdx(*PI);
- assert(li->getVNInfoBefore(Stop) == VNI &&
+ SlotIndex Stop = Indexes.getMBBEndIdx(Pred);
+ assert(OldRange.getVNInfoBefore(Stop) == VNI &&
"Wrong value out of predecessor");
WorkList.push_back(std::make_pair(Stop, VNI));
}
}
+}
+
+bool LiveIntervals::shrinkToUses(LiveInterval *li,
+ SmallVectorImpl<MachineInstr*> *dead) {
+ DEBUG(dbgs() << "Shrink: " << *li << '\n');
+ assert(TargetRegisterInfo::isVirtualRegister(li->reg)
+ && "Can only shrink virtual registers");
+
+ // Shrink subregister live ranges.
+ bool NeedsCleanup = false;
+ for (LiveInterval::SubRange &S : li->subranges()) {
+ shrinkToUses(S, li->reg);
+ if (S.empty())
+ NeedsCleanup = true;
+ }
+ if (NeedsCleanup)
+ li->removeEmptySubRanges();
+
+ // Find all the values used, including PHI kills.
+ ShrinkToUsesWorkList WorkList;
+
+ // Visit all instructions reading li->reg.
+ for (MachineRegisterInfo::reg_instr_iterator
+ I = MRI->reg_instr_begin(li->reg), E = MRI->reg_instr_end();
+ I != E; ) {
+ MachineInstr *UseMI = &*(I++);
+ if (UseMI->isDebugValue() || !UseMI->readsVirtualRegister(li->reg))
+ continue;
+ SlotIndex Idx = getInstructionIndex(UseMI).getRegSlot();
+ LiveQueryResult LRQ = li->Query(Idx);
+ VNInfo *VNI = LRQ.valueIn();
+ if (!VNI) {
+ // This shouldn't happen: readsVirtualRegister returns true, but there is
+ // no live value. It is likely caused by a target getting <undef> flags
+ // wrong.
+ DEBUG(dbgs() << Idx << '\t' << *UseMI
+ << "Warning: Instr claims to read non-existent value in "
+ << *li << '\n');
+ continue;
+ }
+ // Special case: An early-clobber tied operand reads and writes the
+ // register one slot early.
+ if (VNInfo *DefVNI = LRQ.valueDefined())
+ Idx = DefVNI->def;
+
+ WorkList.push_back(std::make_pair(Idx, VNI));
+ }
+
+ // Create new live ranges with only minimal live segments per def.
+ LiveRange NewLR;
+ createSegmentsForValues(NewLR, make_range(li->vni_begin(), li->vni_end()));
+ extendSegmentsToUses(NewLR, *Indexes, WorkList, *li);
+
+ // Move the trimmed segments back.
+ li->segments.swap(NewLR.segments);
// Handle dead values.
- bool CanSeparate = false;
- for (LiveInterval::vni_iterator I = li->vni_begin(), E = li->vni_end();
- I != E; ++I) {
- VNInfo *VNI = *I;
+ bool CanSeparate = computeDeadValues(*li, dead);
+ DEBUG(dbgs() << "Shrunk: " << *li << '\n');
+ return CanSeparate;
+}
+
+bool LiveIntervals::computeDeadValues(LiveInterval &LI,
+ SmallVectorImpl<MachineInstr*> *dead) {
+ bool PHIRemoved = false;
+ for (auto VNI : LI.valnos) {
if (VNI->isUnused())
continue;
- LiveInterval::iterator LII = NewLI.FindLiveRangeContaining(VNI->def);
- assert(LII != NewLI.end() && "Missing live range for PHI");
- if (LII->end != VNI->def.getDeadSlot())
+ SlotIndex Def = VNI->def;
+ LiveRange::iterator I = LI.FindSegmentContaining(Def);
+ assert(I != LI.end() && "Missing segment for VNI");
+
+ // Is the register live before? Otherwise we may have to add a read-undef
+ // flag for subregister defs.
+ if (MRI->shouldTrackSubRegLiveness(LI.reg)) {
+ if ((I == LI.begin() || std::prev(I)->end < Def) && !VNI->isPHIDef()) {
+ MachineInstr *MI = getInstructionFromIndex(Def);
+ MI->addRegisterDefReadUndef(LI.reg);
+ }
+ }
+
+ if (I->end != Def.getDeadSlot())
continue;
if (VNI->isPHIDef()) {
// This is a dead PHI. Remove it.
VNI->markUnused();
- NewLI.removeRange(*LII);
- DEBUG(dbgs() << "Dead PHI at " << VNI->def << " may separate interval\n");
- CanSeparate = true;
+ LI.removeSegment(I);
+ DEBUG(dbgs() << "Dead PHI at " << Def << " may separate interval\n");
+ PHIRemoved = true;
} else {
// This is a dead def. Make sure the instruction knows.
- MachineInstr *MI = getInstructionFromIndex(VNI->def);
+ MachineInstr *MI = getInstructionFromIndex(Def);
assert(MI && "No instruction defining live value");
- MI->addRegisterDead(li->reg, TRI);
+ MI->addRegisterDead(LI.reg, TRI);
if (dead && MI->allDefsAreDead()) {
- DEBUG(dbgs() << "All defs dead: " << VNI->def << '\t' << *MI);
+ DEBUG(dbgs() << "All defs dead: " << Def << '\t' << *MI);
dead->push_back(MI);
}
}
}
+ return PHIRemoved;
+}
+
+void LiveIntervals::shrinkToUses(LiveInterval::SubRange &SR, unsigned Reg)
+{
+ DEBUG(dbgs() << "Shrink: " << SR << '\n');
+ assert(TargetRegisterInfo::isVirtualRegister(Reg)
+ && "Can only shrink virtual registers");
+ // Find all the values used, including PHI kills.
+ ShrinkToUsesWorkList WorkList;
+
+ // Visit all instructions reading Reg.
+ SlotIndex LastIdx;
+ for (MachineOperand &MO : MRI->reg_operands(Reg)) {
+ MachineInstr *UseMI = MO.getParent();
+ if (UseMI->isDebugValue())
+ continue;
+ // Maybe the operand is for a subregister we don't care about.
+ unsigned SubReg = MO.getSubReg();
+ if (SubReg != 0) {
+ unsigned SubRegMask = TRI->getSubRegIndexLaneMask(SubReg);
+ if ((SubRegMask & SR.LaneMask) == 0)
+ continue;
+ }
+ // We only need to visit each instruction once.
+ SlotIndex Idx = getInstructionIndex(UseMI).getRegSlot();
+ if (Idx == LastIdx)
+ continue;
+ LastIdx = Idx;
+
+ LiveQueryResult LRQ = SR.Query(Idx);
+ VNInfo *VNI = LRQ.valueIn();
+ // For Subranges it is possible that only undef values are left in that
+ // part of the subregister, so there is no real liverange at the use
+ if (!VNI)
+ continue;
+
+ // Special case: An early-clobber tied operand reads and writes the
+ // register one slot early.
+ if (VNInfo *DefVNI = LRQ.valueDefined())
+ Idx = DefVNI->def;
+
+ WorkList.push_back(std::make_pair(Idx, VNI));
+ }
+
+ // Create a new live ranges with only minimal live segments per def.
+ LiveRange NewLR;
+ createSegmentsForValues(NewLR, make_range(SR.vni_begin(), SR.vni_end()));
+ extendSegmentsToUses(NewLR, *Indexes, WorkList, SR);
// Move the trimmed ranges back.
- li->ranges.swap(NewLI.ranges);
- DEBUG(dbgs() << "Shrunk: " << *li << '\n');
- return CanSeparate;
+ SR.segments.swap(NewLR.segments);
+
+ // Remove dead PHI value numbers
+ for (auto VNI : SR.valnos) {
+ if (VNI->isUnused())
+ continue;
+ const LiveRange::Segment *Segment = SR.getSegmentContaining(VNI->def);
+ assert(Segment != nullptr && "Missing segment for VNI");
+ if (Segment->end != VNI->def.getDeadSlot())
+ continue;
+ if (VNI->isPHIDef()) {
+ // This is a dead PHI. Remove it.
+ VNI->markUnused();
+ SR.removeSegment(*Segment);
+ DEBUG(dbgs() << "Dead PHI at " << VNI->def << " may separate interval\n");
+ }
+ }
+
+ DEBUG(dbgs() << "Shrunk: " << SR << '\n');
}
-void LiveIntervals::extendToIndices(LiveInterval *LI,
+void LiveIntervals::extendToIndices(LiveRange &LR,
ArrayRef<SlotIndex> Indices) {
assert(LRCalc && "LRCalc not initialized.");
LRCalc->reset(MF, getSlotIndexes(), DomTree, &getVNInfoAllocator());
for (unsigned i = 0, e = Indices.size(); i != e; ++i)
- LRCalc->extend(LI, Indices[i]);
+ LRCalc->extend(LR, Indices[i]);
}
-void LiveIntervals::pruneValue(LiveInterval *LI, SlotIndex Kill,
+void LiveIntervals::pruneValue(LiveRange &LR, SlotIndex Kill,
SmallVectorImpl<SlotIndex> *EndPoints) {
- LiveRangeQuery LRQ(*LI, Kill);
- VNInfo *VNI = LRQ.valueOut();
+ LiveQueryResult LRQ = LR.Query(Kill);
+ VNInfo *VNI = LRQ.valueOutOrDead();
if (!VNI)
return;
MachineBasicBlock *KillMBB = Indexes->getMBBFromIndex(Kill);
- SlotIndex MBBStart, MBBEnd;
- tie(MBBStart, MBBEnd) = Indexes->getMBBRange(KillMBB);
+ SlotIndex MBBEnd = Indexes->getMBBEndIdx(KillMBB);
// If VNI isn't live out from KillMBB, the value is trivially pruned.
if (LRQ.endPoint() < MBBEnd) {
- LI->removeRange(Kill, LRQ.endPoint());
+ LR.removeSegment(Kill, LRQ.endPoint());
if (EndPoints) EndPoints->push_back(LRQ.endPoint());
return;
}
// VNI is live out of KillMBB.
- LI->removeRange(Kill, MBBEnd);
+ LR.removeSegment(Kill, MBBEnd);
if (EndPoints) EndPoints->push_back(MBBEnd);
// Find all blocks that are reachable from KillMBB without leaving VNI's live
MachineBasicBlock *MBB = *I;
// Check if VNI is live in to MBB.
- tie(MBBStart, MBBEnd) = Indexes->getMBBRange(MBB);
- LiveRangeQuery LRQ(*LI, MBBStart);
+ SlotIndex MBBStart, MBBEnd;
+ std::tie(MBBStart, MBBEnd) = Indexes->getMBBRange(MBB);
+ LiveQueryResult LRQ = LR.Query(MBBStart);
if (LRQ.valueIn() != VNI) {
- // This block isn't part of the VNI live range. Prune the search.
+ // This block isn't part of the VNI segment. Prune the search.
I.skipChildren();
continue;
}
// Prune the search if VNI is killed in MBB.
if (LRQ.endPoint() < MBBEnd) {
- LI->removeRange(MBBStart, LRQ.endPoint());
+ LR.removeSegment(MBBStart, LRQ.endPoint());
if (EndPoints) EndPoints->push_back(LRQ.endPoint());
I.skipChildren();
continue;
}
// VNI is live through MBB.
- LI->removeRange(MBBStart, MBBEnd);
+ LR.removeSegment(MBBStart, MBBEnd);
if (EndPoints) EndPoints->push_back(MBBEnd);
++I;
}
void LiveIntervals::addKillFlags(const VirtRegMap *VRM) {
// Keep track of regunit ranges.
- SmallVector<std::pair<LiveInterval*, LiveInterval::iterator>, 8> RU;
+ SmallVector<std::pair<const LiveRange*, LiveRange::const_iterator>, 8> RU;
+ // Keep track of subregister ranges.
+ SmallVector<std::pair<const LiveInterval::SubRange*,
+ LiveRange::const_iterator>, 4> SRs;
for (unsigned i = 0, e = MRI->getNumVirtRegs(); i != e; ++i) {
unsigned Reg = TargetRegisterInfo::index2VirtReg(i);
if (MRI->reg_nodbg_empty(Reg))
continue;
- LiveInterval *LI = &getInterval(Reg);
- if (LI->empty())
+ const LiveInterval &LI = getInterval(Reg);
+ if (LI.empty())
continue;
// Find the regunit intervals for the assigned register. They may overlap
RU.clear();
for (MCRegUnitIterator Units(VRM->getPhys(Reg), TRI); Units.isValid();
++Units) {
- LiveInterval *RUInt = &getRegUnit(*Units);
- if (RUInt->empty())
+ const LiveRange &RURange = getRegUnit(*Units);
+ if (RURange.empty())
continue;
- RU.push_back(std::make_pair(RUInt, RUInt->find(LI->begin()->end)));
+ RU.push_back(std::make_pair(&RURange, RURange.find(LI.begin()->end)));
+ }
+
+ if (MRI->subRegLivenessEnabled()) {
+ SRs.clear();
+ for (const LiveInterval::SubRange &SR : LI.subranges()) {
+ SRs.push_back(std::make_pair(&SR, SR.find(LI.begin()->end)));
+ }
}
- // Every instruction that kills Reg corresponds to a live range end point.
- for (LiveInterval::iterator RI = LI->begin(), RE = LI->end(); RI != RE;
+ // Every instruction that kills Reg corresponds to a segment range end
+ // point.
+ for (LiveInterval::const_iterator RI = LI.begin(), RE = LI.end(); RI != RE;
++RI) {
// A block index indicates an MBB edge.
if (RI->end.isBlock())
if (!MI)
continue;
- // Check if any of the reguints are live beyond the end of RI. That could
+ // Check if any of the regunits are live beyond the end of RI. That could
// happen when a physreg is defined as a copy of a virtreg:
//
// %EAX = COPY %vreg5
// BAR %EAX<kill>
//
// There should be no kill flag on FOO when %vreg5 is rewritten as %EAX.
- bool CancelKill = false;
- for (unsigned u = 0, e = RU.size(); u != e; ++u) {
- LiveInterval *RInt = RU[u].first;
- LiveInterval::iterator &I = RU[u].second;
- if (I == RInt->end())
+ for (auto &RUP : RU) {
+ const LiveRange &RURange = *RUP.first;
+ LiveRange::const_iterator &I = RUP.second;
+ if (I == RURange.end())
continue;
- I = RInt->advanceTo(I, RI->end);
- if (I == RInt->end() || I->start >= RI->end)
+ I = RURange.advanceTo(I, RI->end);
+ if (I == RURange.end() || I->start >= RI->end)
continue;
// I is overlapping RI.
- CancelKill = true;
- break;
+ goto CancelKill;
}
- if (CancelKill)
- MI->clearRegisterKills(Reg, NULL);
- else
- MI->addRegisterKilled(Reg, NULL);
+
+ if (MRI->subRegLivenessEnabled()) {
+ // When reading a partial undefined value we must not add a kill flag.
+ // The regalloc might have used the undef lane for something else.
+ // Example:
+ // %vreg1 = ... ; R32: %vreg1
+ // %vreg2:high16 = ... ; R64: %vreg2
+ // = read %vreg2<kill> ; R64: %vreg2
+ // = read %vreg1 ; R32: %vreg1
+ // The <kill> flag is correct for %vreg2, but the register allocator may
+ // assign R0L to %vreg1, and R0 to %vreg2 because the low 32bits of R0
+ // are actually never written by %vreg2. After assignment the <kill>
+ // flag at the read instruction is invalid.
+ unsigned DefinedLanesMask;
+ if (!SRs.empty()) {
+ // Compute a mask of lanes that are defined.
+ DefinedLanesMask = 0;
+ for (auto &SRP : SRs) {
+ const LiveInterval::SubRange &SR = *SRP.first;
+ LiveRange::const_iterator &I = SRP.second;
+ if (I == SR.end())
+ continue;
+ I = SR.advanceTo(I, RI->end);
+ if (I == SR.end() || I->start >= RI->end)
+ continue;
+ // I is overlapping RI
+ DefinedLanesMask |= SR.LaneMask;
+ }
+ } else
+ DefinedLanesMask = ~0u;
+
+ bool IsFullWrite = false;
+ for (const MachineOperand &MO : MI->operands()) {
+ if (!MO.isReg() || MO.getReg() != Reg)
+ continue;
+ if (MO.isUse()) {
+ // Reading any undefined lanes?
+ unsigned UseMask = TRI->getSubRegIndexLaneMask(MO.getSubReg());
+ if ((UseMask & ~DefinedLanesMask) != 0)
+ goto CancelKill;
+ } else if (MO.getSubReg() == 0) {
+ // Writing to the full register?
+ assert(MO.isDef());
+ IsFullWrite = true;
+ }
+ }
+
+ // If an instruction writes to a subregister, a new segment starts in
+ // the LiveInterval. But as this is only overriding part of the register
+ // adding kill-flags is not correct here after registers have been
+ // assigned.
+ if (!IsFullWrite) {
+ // Next segment has to be adjacent in the subregister write case.
+ LiveRange::const_iterator N = std::next(RI);
+ if (N != LI.end() && N->start == RI->end)
+ goto CancelKill;
+ }
+ }
+
+ MI->addRegisterKilled(Reg, nullptr);
+ continue;
+CancelKill:
+ MI->clearRegisterKills(Reg, nullptr);
}
}
}
SlotIndex Start = LI.beginIndex();
if (Start.isBlock())
- return NULL;
+ return nullptr;
SlotIndex Stop = LI.endIndex();
if (Stop.isBlock())
- return NULL;
+ return nullptr;
// getMBBFromIndex doesn't need to search the MBB table when both indexes
// belong to proper instructions.
MachineBasicBlock *MBB1 = Indexes->getMBBFromIndex(Start);
MachineBasicBlock *MBB2 = Indexes->getMBBFromIndex(Stop);
- return MBB1 == MBB2 ? MBB1 : NULL;
+ return MBB1 == MBB2 ? MBB1 : nullptr;
}
bool
LiveIntervals::hasPHIKill(const LiveInterval &LI, const VNInfo *VNI) const {
- for (LiveInterval::const_vni_iterator I = LI.vni_begin(), E = LI.vni_end();
- I != E; ++I) {
- const VNInfo *PHI = *I;
+ for (const VNInfo *PHI : LI.valnos) {
if (PHI->isUnused() || !PHI->isPHIDef())
continue;
const MachineBasicBlock *PHIMBB = getMBBFromIndex(PHI->def);
}
float
-LiveIntervals::getSpillWeight(bool isDef, bool isUse, unsigned loopDepth) {
- // Limit the loop depth ridiculousness.
- if (loopDepth > 200)
- loopDepth = 200;
-
- // The loop depth is used to roughly estimate the number of times the
- // instruction is executed. Something like 10^d is simple, but will quickly
- // overflow a float. This expression behaves like 10^d for small d, but is
- // more tempered for large d. At d=200 we get 6.7e33 which leaves a bit of
- // headroom before overflow.
- // By the way, powf() might be unavailable here. For consistency,
- // We may take pow(double,double).
- float lc = std::pow(1 + (100.0 / (loopDepth + 10)), (double)loopDepth);
-
- return (isDef + isUse) * lc;
+LiveIntervals::getSpillWeight(bool isDef, bool isUse,
+ const MachineBlockFrequencyInfo *MBFI,
+ const MachineInstr *MI) {
+ BlockFrequency Freq = MBFI->getBlockFreq(MI->getParent());
+ const float Scale = 1.0f / MBFI->getEntryFreq();
+ return (isDef + isUse) * (Freq.getFrequency() * Scale);
}
-LiveRange LiveIntervals::addLiveRangeToEndOfBlock(unsigned reg,
- MachineInstr* startInst) {
- LiveInterval& Interval = getOrCreateInterval(reg);
+LiveRange::Segment
+LiveIntervals::addSegmentToEndOfBlock(unsigned reg, MachineInstr* startInst) {
+ LiveInterval& Interval = createEmptyInterval(reg);
VNInfo* VN = Interval.getNextValue(
SlotIndex(getInstructionIndex(startInst).getRegSlot()),
getVNInfoAllocator());
- LiveRange LR(
+ LiveRange::Segment S(
SlotIndex(getInstructionIndex(startInst).getRegSlot()),
getMBBEndIdx(startInst->getParent()), VN);
- Interval.addRange(LR);
+ Interval.addSegment(S);
- return LR;
+ return S;
}
const TargetRegisterInfo& TRI;
SlotIndex OldIdx;
SlotIndex NewIdx;
- SmallPtrSet<LiveInterval*, 8> Updated;
+ SmallPtrSet<LiveRange*, 8> Updated;
+ bool UpdateFlags;
public:
HMEditor(LiveIntervals& LIS, const MachineRegisterInfo& MRI,
const TargetRegisterInfo& TRI,
- SlotIndex OldIdx, SlotIndex NewIdx)
- : LIS(LIS), MRI(MRI), TRI(TRI), OldIdx(OldIdx), NewIdx(NewIdx) {}
+ SlotIndex OldIdx, SlotIndex NewIdx, bool UpdateFlags)
+ : LIS(LIS), MRI(MRI), TRI(TRI), OldIdx(OldIdx), NewIdx(NewIdx),
+ UpdateFlags(UpdateFlags) {}
+
+ // FIXME: UpdateFlags is a workaround that creates live intervals for all
+ // physregs, even those that aren't needed for regalloc, in order to update
+ // kill flags. This is wasteful. Eventually, LiveVariables will strip all kill
+ // flags, and postRA passes will use a live register utility instead.
+ LiveRange *getRegUnitLI(unsigned Unit) {
+ if (UpdateFlags)
+ return &LIS.getRegUnit(Unit);
+ return LIS.getCachedRegUnit(Unit);
+ }
/// Update all live ranges touched by MI, assuming a move from OldIdx to
/// NewIdx.
void updateAllRanges(MachineInstr *MI) {
DEBUG(dbgs() << "handleMove " << OldIdx << " -> " << NewIdx << ": " << *MI);
bool hasRegMask = false;
- for (MIOperands MO(MI); MO.isValid(); ++MO) {
- if (MO->isRegMask())
+ for (MachineOperand &MO : MI->operands()) {
+ if (MO.isRegMask())
hasRegMask = true;
- if (!MO->isReg())
+ if (!MO.isReg())
continue;
// Aggressively clear all kill flags.
// They are reinserted by VirtRegRewriter.
- if (MO->isUse())
- MO->setIsKill(false);
+ if (MO.isUse())
+ MO.setIsKill(false);
- unsigned Reg = MO->getReg();
+ unsigned Reg = MO.getReg();
if (!Reg)
continue;
if (TargetRegisterInfo::isVirtualRegister(Reg)) {
- updateRange(LIS.getInterval(Reg));
+ LiveInterval &LI = LIS.getInterval(Reg);
+ if (LI.hasSubRanges()) {
+ unsigned SubReg = MO.getSubReg();
+ unsigned LaneMask = TRI.getSubRegIndexLaneMask(SubReg);
+ for (LiveInterval::SubRange &S : LI.subranges()) {
+ if ((S.LaneMask & LaneMask) == 0)
+ continue;
+ updateRange(S, Reg, S.LaneMask);
+ }
+ }
+ updateRange(LI, Reg, 0);
continue;
}
// For physregs, only update the regunits that actually have a
// precomputed live range.
for (MCRegUnitIterator Units(Reg, &TRI); Units.isValid(); ++Units)
- if (LiveInterval *LI = LIS.getCachedRegUnit(*Units))
- updateRange(*LI);
+ if (LiveRange *LR = getRegUnitLI(*Units))
+ updateRange(*LR, *Units, 0);
}
if (hasRegMask)
updateRegMaskSlots();
private:
/// Update a single live range, assuming an instruction has been moved from
/// OldIdx to NewIdx.
- void updateRange(LiveInterval &LI) {
- if (!Updated.insert(&LI))
+ void updateRange(LiveRange &LR, unsigned Reg, unsigned LaneMask) {
+ if (!Updated.insert(&LR).second)
return;
DEBUG({
dbgs() << " ";
- if (TargetRegisterInfo::isVirtualRegister(LI.reg))
- dbgs() << PrintReg(LI.reg);
- else
- dbgs() << PrintRegUnit(LI.reg, &TRI);
- dbgs() << ":\t" << LI << '\n';
+ if (TargetRegisterInfo::isVirtualRegister(Reg)) {
+ dbgs() << PrintReg(Reg);
+ if (LaneMask != 0)
+ dbgs() << format(" L%04X", LaneMask);
+ } else {
+ dbgs() << PrintRegUnit(Reg, &TRI);
+ }
+ dbgs() << ":\t" << LR << '\n';
});
if (SlotIndex::isEarlierInstr(OldIdx, NewIdx))
- handleMoveDown(LI);
+ handleMoveDown(LR);
else
- handleMoveUp(LI);
- DEBUG(dbgs() << " -->\t" << LI << '\n');
- LI.verify();
+ handleMoveUp(LR, Reg, LaneMask);
+ DEBUG(dbgs() << " -->\t" << LR << '\n');
+ LR.verify();
}
- /// Update LI to reflect an instruction has been moved downwards from OldIdx
+ /// Update LR to reflect an instruction has been moved downwards from OldIdx
/// to NewIdx.
///
/// 1. Live def at OldIdx:
/// Move def to NewIdx, possibly across another live value.
///
/// 4. Def at OldIdx AND at NewIdx:
- /// Remove live range [OldIdx;NewIdx) and value defined at OldIdx.
+ /// Remove segment [OldIdx;NewIdx) and value defined at OldIdx.
/// (Happens when bundling multiple defs together).
///
/// 5. Value read at OldIdx, killed before NewIdx:
/// Extend kill to NewIdx.
///
- void handleMoveDown(LiveInterval &LI) {
+ void handleMoveDown(LiveRange &LR) {
// First look for a kill at OldIdx.
- LiveInterval::iterator I = LI.find(OldIdx.getBaseIndex());
- LiveInterval::iterator E = LI.end();
- // Is LI even live at OldIdx?
+ LiveRange::iterator I = LR.find(OldIdx.getBaseIndex());
+ LiveRange::iterator E = LR.end();
+ // Is LR even live at OldIdx?
if (I == E || SlotIndex::isEarlierInstr(OldIdx, I->start))
return;
for (MIBundleOperands MO(KillMI); MO.isValid(); ++MO)
if (MO->isReg() && MO->isUse())
MO->setIsKill(false);
- // Adjust I->end to reach NewIdx. This may temporarily make LI invalid by
+ // Adjust I->end to reach NewIdx. This may temporarily make LR invalid by
// overlapping ranges. Case 5 above.
I->end = NewIdx.getRegSlot(I->end.isEarlyClobber());
// If this was a kill, there may also be a def. Otherwise we're done.
assert((I->end == OldIdx.getDeadSlot() ||
SlotIndex::isSameInstr(I->end, NewIdx)) &&
"Cannot move def below kill");
- LiveInterval::iterator NewI = LI.advanceTo(I, NewIdx.getRegSlot());
+ LiveRange::iterator NewI = LR.advanceTo(I, NewIdx.getRegSlot());
if (NewI != E && SlotIndex::isSameInstr(NewI->start, NewIdx)) {
// There is an existing def at NewIdx, case 4 above. The def at OldIdx is
// coalesced into that value.
assert(NewI->valno != DefVNI && "Multiple defs of value?");
- LI.removeValNo(DefVNI);
+ LR.removeValNo(DefVNI);
return;
}
// There was no existing def at NewIdx. Turn *I into a dead def at NewIdx.
- // If the def at OldIdx was dead, we allow it to be moved across other LI
+ // If the def at OldIdx was dead, we allow it to be moved across other LR
// values. The new range should be placed immediately before NewI, move any
// intermediate ranges up.
assert(NewI != I && "Inconsistent iterators");
- std::copy(llvm::next(I), NewI, I);
- *llvm::prior(NewI) = LiveRange(DefVNI->def, NewIdx.getDeadSlot(), DefVNI);
+ std::copy(std::next(I), NewI, I);
+ *std::prev(NewI)
+ = LiveRange::Segment(DefVNI->def, NewIdx.getDeadSlot(), DefVNI);
}
- /// Update LI to reflect an instruction has been moved upwards from OldIdx
+ /// Update LR to reflect an instruction has been moved upwards from OldIdx
/// to NewIdx.
///
/// 1. Live def at OldIdx:
/// Hoist kill to NewIdx, then scan for last kill between NewIdx and
/// OldIdx.
///
- void handleMoveUp(LiveInterval &LI) {
+ void handleMoveUp(LiveRange &LR, unsigned Reg, unsigned LaneMask) {
// First look for a kill at OldIdx.
- LiveInterval::iterator I = LI.find(OldIdx.getBaseIndex());
- LiveInterval::iterator E = LI.end();
- // Is LI even live at OldIdx?
+ LiveRange::iterator I = LR.find(OldIdx.getBaseIndex());
+ LiveRange::iterator E = LR.end();
+ // Is LR even live at OldIdx?
if (I == E || SlotIndex::isEarlierInstr(OldIdx, I->start))
return;
if (I == E || !SlotIndex::isSameInstr(I->start, OldIdx)) {
// No def, search for the new kill.
// This can never be an early clobber kill since there is no def.
- llvm::prior(I)->end = findLastUseBefore(LI.reg).getRegSlot();
+ std::prev(I)->end = findLastUseBefore(Reg, LaneMask).getRegSlot();
return;
}
}
DefVNI->def = NewIdx.getRegSlot(I->start.isEarlyClobber());
// Check for an existing def at NewIdx.
- LiveInterval::iterator NewI = LI.find(NewIdx.getRegSlot());
+ LiveRange::iterator NewI = LR.find(NewIdx.getRegSlot());
if (SlotIndex::isSameInstr(NewI->start, NewIdx)) {
assert(NewI->valno != DefVNI && "Same value defined more than once?");
// There is an existing def at NewIdx.
if (I->end.isDead()) {
// Case 3: Remove the dead def at OldIdx.
- LI.removeValNo(DefVNI);
+ LR.removeValNo(DefVNI);
return;
}
// Case 4: Replace def at NewIdx with live def at OldIdx.
I->start = DefVNI->def;
- LI.removeValNo(NewI->valno);
+ LR.removeValNo(NewI->valno);
return;
}
return;
}
- // DefVNI is a dead def. It may have been moved across other values in LI,
+ // DefVNI is a dead def. It may have been moved across other values in LR,
// so move I up to NewI. Slide [NewI;I) down one position.
- std::copy_backward(NewI, I, llvm::next(I));
- *NewI = LiveRange(DefVNI->def, NewIdx.getDeadSlot(), DefVNI);
+ std::copy_backward(NewI, I, std::next(I));
+ *NewI = LiveRange::Segment(DefVNI->def, NewIdx.getDeadSlot(), DefVNI);
}
void updateRegMaskSlots() {
SmallVectorImpl<SlotIndex>::iterator RI =
std::lower_bound(LIS.RegMaskSlots.begin(), LIS.RegMaskSlots.end(),
OldIdx);
- assert(*RI == OldIdx && "No RegMask at OldIdx.");
- *RI = NewIdx;
- assert(*prior(RI) < *RI && *RI < *next(RI) &&
- "RegSlots out of order. Did you move one call across another?");
+ assert(RI != LIS.RegMaskSlots.end() && *RI == OldIdx.getRegSlot() &&
+ "No RegMask at OldIdx.");
+ *RI = NewIdx.getRegSlot();
+ assert((RI == LIS.RegMaskSlots.begin() ||
+ SlotIndex::isEarlierInstr(*std::prev(RI), *RI)) &&
+ "Cannot move regmask instruction above another call");
+ assert((std::next(RI) == LIS.RegMaskSlots.end() ||
+ SlotIndex::isEarlierInstr(*RI, *std::next(RI))) &&
+ "Cannot move regmask instruction below another call");
}
// Return the last use of reg between NewIdx and OldIdx.
- SlotIndex findLastUseBefore(unsigned Reg) {
- SlotIndex LastUse = NewIdx;
+ SlotIndex findLastUseBefore(unsigned Reg, unsigned LaneMask) {
if (TargetRegisterInfo::isVirtualRegister(Reg)) {
- for (MachineRegisterInfo::use_nodbg_iterator
- UI = MRI.use_nodbg_begin(Reg),
- UE = MRI.use_nodbg_end();
- UI != UE; UI.skipInstruction()) {
- const MachineInstr* MI = &*UI;
+ SlotIndex LastUse = NewIdx;
+ for (MachineOperand &MO : MRI.use_nodbg_operands(Reg)) {
+ unsigned SubReg = MO.getSubReg();
+ if (SubReg != 0 && LaneMask != 0
+ && (TRI.getSubRegIndexLaneMask(SubReg) & LaneMask) == 0)
+ continue;
+
+ const MachineInstr *MI = MO.getParent();
SlotIndex InstSlot = LIS.getSlotIndexes()->getInstructionIndex(MI);
if (InstSlot > LastUse && InstSlot < OldIdx)
LastUse = InstSlot;
}
- } else {
- MachineInstr* MI = LIS.getSlotIndexes()->getInstructionFromIndex(NewIdx);
- MachineBasicBlock::iterator MII(MI);
- ++MII;
- MachineBasicBlock* MBB = MI->getParent();
- for (; MII != MBB->end() && LIS.getInstructionIndex(MII) < OldIdx; ++MII){
- for (MachineInstr::mop_iterator MOI = MII->operands_begin(),
- MOE = MII->operands_end();
- MOI != MOE; ++MOI) {
- const MachineOperand& mop = *MOI;
- if (!mop.isReg() || mop.getReg() == 0 ||
- TargetRegisterInfo::isVirtualRegister(mop.getReg()))
- continue;
+ return LastUse;
+ }
- if (TRI.hasRegUnit(mop.getReg(), Reg))
- LastUse = LIS.getInstructionIndex(MII);
- }
- }
+ // This is a regunit interval, so scanning the use list could be very
+ // expensive. Scan upwards from OldIdx instead.
+ assert(NewIdx < OldIdx && "Expected upwards move");
+ SlotIndexes *Indexes = LIS.getSlotIndexes();
+ MachineBasicBlock *MBB = Indexes->getMBBFromIndex(NewIdx);
+
+ // OldIdx may not correspond to an instruction any longer, so set MII to
+ // point to the next instruction after OldIdx, or MBB->end().
+ MachineBasicBlock::iterator MII = MBB->end();
+ if (MachineInstr *MI = Indexes->getInstructionFromIndex(
+ Indexes->getNextNonNullIndex(OldIdx)))
+ if (MI->getParent() == MBB)
+ MII = MI;
+
+ MachineBasicBlock::iterator Begin = MBB->begin();
+ while (MII != Begin) {
+ if ((--MII)->isDebugValue())
+ continue;
+ SlotIndex Idx = Indexes->getInstructionIndex(MII);
+
+ // Stop searching when NewIdx is reached.
+ if (!SlotIndex::isEarlierInstr(NewIdx, Idx))
+ return NewIdx;
+
+ // Check if MII uses Reg.
+ for (MIBundleOperands MO(MII); MO.isValid(); ++MO)
+ if (MO->isReg() &&
+ TargetRegisterInfo::isPhysicalRegister(MO->getReg()) &&
+ TRI.hasRegUnit(MO->getReg(), Reg))
+ return Idx;
}
- return LastUse;
+ // Didn't reach NewIdx. It must be the first instruction in the block.
+ return NewIdx;
}
};
-void LiveIntervals::handleMove(MachineInstr* MI) {
+void LiveIntervals::handleMove(MachineInstr* MI, bool UpdateFlags) {
assert(!MI->isBundled() && "Can't handle bundled instructions yet.");
SlotIndex OldIndex = Indexes->getInstructionIndex(MI);
Indexes->removeMachineInstrFromMaps(MI);
OldIndex < getMBBEndIdx(MI->getParent()) &&
"Cannot handle moves across basic block boundaries.");
- HMEditor HME(*this, *MRI, *TRI, OldIndex, NewIndex);
+ HMEditor HME(*this, *MRI, *TRI, OldIndex, NewIndex, UpdateFlags);
HME.updateAllRanges(MI);
}
void LiveIntervals::handleMoveIntoBundle(MachineInstr* MI,
- MachineInstr* BundleStart) {
+ MachineInstr* BundleStart,
+ bool UpdateFlags) {
SlotIndex OldIndex = Indexes->getInstructionIndex(MI);
SlotIndex NewIndex = Indexes->getInstructionIndex(BundleStart);
- HMEditor HME(*this, *MRI, *TRI, OldIndex, NewIndex);
+ HMEditor HME(*this, *MRI, *TRI, OldIndex, NewIndex, UpdateFlags);
HME.updateAllRanges(MI);
}
+
+void LiveIntervals::repairOldRegInRange(const MachineBasicBlock::iterator Begin,
+ const MachineBasicBlock::iterator End,
+ const SlotIndex endIdx,
+ LiveRange &LR, const unsigned Reg,
+ const unsigned LaneMask) {
+ LiveInterval::iterator LII = LR.find(endIdx);
+ SlotIndex lastUseIdx;
+ if (LII != LR.end() && LII->start < endIdx)
+ lastUseIdx = LII->end;
+ else
+ --LII;
+
+ for (MachineBasicBlock::iterator I = End; I != Begin;) {
+ --I;
+ MachineInstr *MI = I;
+ if (MI->isDebugValue())
+ continue;
+
+ SlotIndex instrIdx = getInstructionIndex(MI);
+ bool isStartValid = getInstructionFromIndex(LII->start);
+ bool isEndValid = getInstructionFromIndex(LII->end);
+
+ // FIXME: This doesn't currently handle early-clobber or multiple removed
+ // defs inside of the region to repair.
+ for (MachineInstr::mop_iterator OI = MI->operands_begin(),
+ OE = MI->operands_end(); OI != OE; ++OI) {
+ const MachineOperand &MO = *OI;
+ if (!MO.isReg() || MO.getReg() != Reg)
+ continue;
+
+ unsigned SubReg = MO.getSubReg();
+ unsigned Mask = TRI->getSubRegIndexLaneMask(SubReg);
+ if ((Mask & LaneMask) == 0)
+ continue;
+
+ if (MO.isDef()) {
+ if (!isStartValid) {
+ if (LII->end.isDead()) {
+ SlotIndex prevStart;
+ if (LII != LR.begin())
+ prevStart = std::prev(LII)->start;
+
+ // FIXME: This could be more efficient if there was a
+ // removeSegment method that returned an iterator.
+ LR.removeSegment(*LII, true);
+ if (prevStart.isValid())
+ LII = LR.find(prevStart);
+ else
+ LII = LR.begin();
+ } else {
+ LII->start = instrIdx.getRegSlot();
+ LII->valno->def = instrIdx.getRegSlot();
+ if (MO.getSubReg() && !MO.isUndef())
+ lastUseIdx = instrIdx.getRegSlot();
+ else
+ lastUseIdx = SlotIndex();
+ continue;
+ }
+ }
+
+ if (!lastUseIdx.isValid()) {
+ VNInfo *VNI = LR.getNextValue(instrIdx.getRegSlot(), VNInfoAllocator);
+ LiveRange::Segment S(instrIdx.getRegSlot(),
+ instrIdx.getDeadSlot(), VNI);
+ LII = LR.addSegment(S);
+ } else if (LII->start != instrIdx.getRegSlot()) {
+ VNInfo *VNI = LR.getNextValue(instrIdx.getRegSlot(), VNInfoAllocator);
+ LiveRange::Segment S(instrIdx.getRegSlot(), lastUseIdx, VNI);
+ LII = LR.addSegment(S);
+ }
+
+ if (MO.getSubReg() && !MO.isUndef())
+ lastUseIdx = instrIdx.getRegSlot();
+ else
+ lastUseIdx = SlotIndex();
+ } else if (MO.isUse()) {
+ // FIXME: This should probably be handled outside of this branch,
+ // either as part of the def case (for defs inside of the region) or
+ // after the loop over the region.
+ if (!isEndValid && !LII->end.isBlock())
+ LII->end = instrIdx.getRegSlot();
+ if (!lastUseIdx.isValid())
+ lastUseIdx = instrIdx.getRegSlot();
+ }
+ }
+ }
+}
+
+void
+LiveIntervals::repairIntervalsInRange(MachineBasicBlock *MBB,
+ MachineBasicBlock::iterator Begin,
+ MachineBasicBlock::iterator End,
+ ArrayRef<unsigned> OrigRegs) {
+ // Find anchor points, which are at the beginning/end of blocks or at
+ // instructions that already have indexes.
+ while (Begin != MBB->begin() && !Indexes->hasIndex(Begin))
+ --Begin;
+ while (End != MBB->end() && !Indexes->hasIndex(End))
+ ++End;
+
+ SlotIndex endIdx;
+ if (End == MBB->end())
+ endIdx = getMBBEndIdx(MBB).getPrevSlot();
+ else
+ endIdx = getInstructionIndex(End);
+
+ Indexes->repairIndexesInRange(MBB, Begin, End);
+
+ for (MachineBasicBlock::iterator I = End; I != Begin;) {
+ --I;
+ MachineInstr *MI = I;
+ if (MI->isDebugValue())
+ continue;
+ for (MachineInstr::const_mop_iterator MOI = MI->operands_begin(),
+ MOE = MI->operands_end(); MOI != MOE; ++MOI) {
+ if (MOI->isReg() &&
+ TargetRegisterInfo::isVirtualRegister(MOI->getReg()) &&
+ !hasInterval(MOI->getReg())) {
+ createAndComputeVirtRegInterval(MOI->getReg());
+ }
+ }
+ }
+
+ for (unsigned i = 0, e = OrigRegs.size(); i != e; ++i) {
+ unsigned Reg = OrigRegs[i];
+ if (!TargetRegisterInfo::isVirtualRegister(Reg))
+ continue;
+
+ LiveInterval &LI = getInterval(Reg);
+ // FIXME: Should we support undefs that gain defs?
+ if (!LI.hasAtLeastOneValue())
+ continue;
+
+ for (LiveInterval::SubRange &S : LI.subranges()) {
+ repairOldRegInRange(Begin, End, endIdx, S, Reg, S.LaneMask);
+ }
+ repairOldRegInRange(Begin, End, endIdx, LI, Reg);
+ }
+}
+
+void LiveIntervals::removePhysRegDefAt(unsigned Reg, SlotIndex Pos) {
+ for (MCRegUnitIterator Units(Reg, TRI); Units.isValid(); ++Units) {
+ if (LiveRange *LR = getCachedRegUnit(*Units))
+ if (VNInfo *VNI = LR->getVNInfoAt(Pos))
+ LR->removeValNo(VNI);
+ }
+}
+
+void LiveIntervals::removeVRegDefAt(LiveInterval &LI, SlotIndex Pos) {
+ VNInfo *VNI = LI.getVNInfoAt(Pos);
+ if (VNI == nullptr)
+ return;
+ LI.removeValNo(VNI);
+
+ // Also remove the value in subranges.
+ for (LiveInterval::SubRange &S : LI.subranges()) {
+ if (VNInfo *SVNI = S.getVNInfoAt(Pos))
+ S.removeValNo(SVNI);
+ }
+ LI.removeEmptySubRanges();
+}