* @shift: pointer to shift variable
* @from: frequency to convert from
* @to: frequency to convert to
- * @minsec: guaranteed runtime conversion range in seconds
+ * @maxsec: guaranteed runtime conversion range in seconds
*
* The function evaluates the shift/mult pair for the scaled math
* operations of clocksources and clockevents.
* NSEC_PER_SEC == 1GHz and @from is the counter frequency. For clock
* event @to is the counter frequency and @from is NSEC_PER_SEC.
*
- * The @minsec conversion range argument controls the time frame in
+ * The @maxsec conversion range argument controls the time frame in
* seconds which must be covered by the runtime conversion with the
* calculated mult and shift factors. This guarantees that no 64bit
* overflow happens when the input value of the conversion is
* factors.
*/
void
-clocks_calc_mult_shift(u32 *mult, u32 *shift, u32 from, u32 to, u32 minsec)
+clocks_calc_mult_shift(u32 *mult, u32 *shift, u32 from, u32 to, u32 maxsec)
{
u64 tmp;
u32 sft, sftacc= 32;
* Calculate the shift factor which is limiting the conversion
* range:
*/
- tmp = ((u64)minsec * from) >> 32;
+ tmp = ((u64)maxsec * from) >> 32;
while (tmp) {
tmp >>=1;
sftacc--;
*/
for (sft = 32; sft > 0; sft--) {
tmp = (u64) to << sft;
+ tmp += from / 2;
do_div(tmp, from);
if ((tmp >> sftacc) == 0)
break;
static struct timer_list watchdog_timer;
static DECLARE_WORK(watchdog_work, clocksource_watchdog_work);
static DEFINE_SPINLOCK(watchdog_lock);
-static cycle_t watchdog_last;
static int watchdog_running;
static int clocksource_watchdog_kthread(void *data);
if (!watchdog_running)
goto out;
- wdnow = watchdog->read(watchdog);
- wd_nsec = clocksource_cyc2ns((wdnow - watchdog_last) & watchdog->mask,
- watchdog->mult, watchdog->shift);
- watchdog_last = wdnow;
-
list_for_each_entry(cs, &watchdog_list, wd_list) {
/* Clocksource already marked unstable? */
continue;
}
+ local_irq_disable();
csnow = cs->read(cs);
+ wdnow = watchdog->read(watchdog);
+ local_irq_enable();
/* Clocksource initialized ? */
if (!(cs->flags & CLOCK_SOURCE_WATCHDOG)) {
cs->flags |= CLOCK_SOURCE_WATCHDOG;
- cs->wd_last = csnow;
+ cs->wd_last = wdnow;
+ cs->cs_last = csnow;
continue;
}
- /* Check the deviation from the watchdog clocksource. */
- cs_nsec = clocksource_cyc2ns((csnow - cs->wd_last) &
+ wd_nsec = clocksource_cyc2ns((wdnow - cs->wd_last) & watchdog->mask,
+ watchdog->mult, watchdog->shift);
+
+ cs_nsec = clocksource_cyc2ns((csnow - cs->cs_last) &
cs->mask, cs->mult, cs->shift);
- cs->wd_last = csnow;
+ cs->cs_last = csnow;
+ cs->wd_last = wdnow;
+
+ /* Check the deviation from the watchdog clocksource. */
if (abs(cs_nsec - wd_nsec) > WATCHDOG_THRESHOLD) {
clocksource_unstable(cs, cs_nsec - wd_nsec);
continue;
return;
init_timer(&watchdog_timer);
watchdog_timer.function = clocksource_watchdog;
- watchdog_last = watchdog->read(watchdog);
watchdog_timer.expires = jiffies + WATCHDOG_INTERVAL;
add_timer_on(&watchdog_timer, cpumask_first(cpu_online_mask));
watchdog_running = 1;
* note a margin of 12.5% is used because this can be computed with
* a shift, versus say 10% which would require division.
*/
- return max_nsecs - (max_nsecs >> 5);
+ return max_nsecs - (max_nsecs >> 3);
}
#ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
list_add(&cs->list, entry);
}
-
-/*
- * Maximum time we expect to go between ticks. This includes idle
- * tickless time. It provides the trade off between selecting a
- * mult/shift pair that is very precise but can only handle a short
- * period of time, vs. a mult/shift pair that can handle long periods
- * of time but isn't as precise.
- *
- * This is a subsystem constant, and actual hardware limitations
- * may override it (ie: clocksources that wrap every 3 seconds).
- */
-#define MAX_UPDATE_LENGTH 5 /* Seconds */
-
/**
* __clocksource_updatefreq_scale - Used update clocksource with new freq
* @t: clocksource to be registered
*/
void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq)
{
+ u64 sec;
+
/*
- * Ideally we want to use some of the limits used in
- * clocksource_max_deferment, to provide a more informed
- * MAX_UPDATE_LENGTH. But for now this just gets the
- * register interface working properly.
+ * Calc the maximum number of seconds which we can run before
+ * wrapping around. For clocksources which have a mask > 32bit
+ * we need to limit the max sleep time to have a good
+ * conversion precision. 10 minutes is still a reasonable
+ * amount. That results in a shift value of 24 for a
+ * clocksource with mask >= 40bit and f >= 4GHz. That maps to
+ * ~ 0.06ppm granularity for NTP. We apply the same 12.5%
+ * margin as we do in clocksource_max_deferment()
*/
+ sec = (cs->mask - (cs->mask >> 3));
+ do_div(sec, freq);
+ do_div(sec, scale);
+ if (!sec)
+ sec = 1;
+ else if (sec > 600 && cs->mask > UINT_MAX)
+ sec = 600;
+
clocks_calc_mult_shift(&cs->mult, &cs->shift, freq,
- NSEC_PER_SEC/scale,
- MAX_UPDATE_LENGTH*scale);
+ NSEC_PER_SEC / scale, sec * scale);
cs->max_idle_ns = clocksource_max_deferment(cs);
}
EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale);
int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
{
- /* Intialize mult/shift and max_idle_ns */
+ /* Initialize mult/shift and max_idle_ns */
__clocksource_updatefreq_scale(cs, scale, freq);
/* Add clocksource to the clcoksource list */
mutex_lock(&clocksource_mutex);
clocksource_enqueue(cs);
- clocksource_select();
clocksource_enqueue_watchdog(cs);
+ clocksource_select();
mutex_unlock(&clocksource_mutex);
return 0;
}
mutex_lock(&clocksource_mutex);
clocksource_enqueue(cs);
- clocksource_select();
clocksource_enqueue_watchdog(cs);
+ clocksource_select();
mutex_unlock(&clocksource_mutex);
return 0;
}
projects / firefly-linux-kernel-4.4.55.git / blobdiff