struct hwif_s;
typedef int (ide_ack_intr_t)(struct hwif_s *);
-#ifndef NO_DMA
-#define NO_DMA 255
-#endif
-
/*
* hwif_chipset_t is used to keep track of the specific hardware
* chipset used by each IDE interface, if known.
typedef struct hw_regs_s {
unsigned long io_ports[IDE_NR_PORTS]; /* task file registers */
int irq; /* our irq number */
- int dma; /* our dma entry */
ide_ack_intr_t *ack_intr; /* acknowledge interrupt */
hwif_chipset_t chipset;
struct device *dev;
} hw_regs_t;
+struct hwif_s * ide_find_port(unsigned long);
+
int ide_register_hw(hw_regs_t *, void (*)(struct hwif_s *), int,
struct hwif_s **);
-/*
- * Set up hw_regs_t structure before calling ide_register_hw (optional)
- */
void ide_setup_ports( hw_regs_t *hw,
unsigned long base,
int *offsets,
# define ide_init_default_irq(base) (0)
#endif
-/*
- * ide_init_hwif_ports() is OBSOLETE and will be removed in 2.7 series.
- * New ports shouldn't define IDE_ARCH_OBSOLETE_INIT in <asm/ide.h>.
- */
-#ifdef IDE_ARCH_OBSOLETE_INIT
+#ifdef CONFIG_IDE_ARCH_OBSOLETE_INIT
static inline void ide_init_hwif_ports(hw_regs_t *hw,
unsigned long io_addr,
unsigned long ctl_addr,
if (io_addr || ctl_addr)
printk(KERN_WARNING "%s: must not be called\n", __FUNCTION__);
}
-#endif /* IDE_ARCH_OBSOLETE_INIT */
+#endif /* CONFIG_IDE_ARCH_OBSOLETE_INIT */
/* Currently only m68k, apus and m8xx need it */
#ifndef IDE_ARCH_ACK_INTR
((1<<ide_pci)|(1<<ide_cmd646)|(1<<ide_ali14xx))
#define IDE_CHIPSET_IS_PCI(c) ((IDE_CHIPSET_PCI_MASK >> (c)) & 1)
-struct ide_pci_device_s;
+struct ide_port_info;
typedef struct hwif_s {
struct hwif_s *next; /* for linked-list in ide_hwgroup_t */
unsigned long sata_scr[SATA_NR_PORTS];
unsigned long sata_misc[SATA_NR_PORTS];
- hw_regs_t hw; /* Hardware info */
ide_drive_t drives[MAX_DRIVES]; /* drive info */
u8 major; /* our major number */
u8 straight8; /* Alan's straight 8 check */
u8 bus_state; /* power state of the IDE bus */
- u16 host_flags;
+ u32 host_flags;
u8 pio_mask;
hwif_chipset_t chipset; /* sub-module for tuning.. */
struct pci_dev *pci_dev; /* for pci chipsets */
- struct ide_pci_device_s *cds; /* chipset device struct */
+ const struct ide_port_info *cds; /* chipset device struct */
+
+ ide_ack_intr_t *ack_intr;
void (*rw_disk)(ide_drive_t *, struct request *);
/* for pci chipsets */
struct pci_dev *pci_dev;
- /* chipset device struct */
- struct ide_pci_device_s *cds;
/* current request */
struct request *rq;
int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq,
int uptodate, int nr_sectors);
-/*
- * This is used on exit from the driver to designate the next irq handler
- * and also to start the safety timer.
- */
extern void ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry);
-/*
- * This is used on exit from the driver to designate the next irq handler
- * and start the safety time safely and atomically from the IRQ handler
- * with respect to the command issue (which it also does)
- */
extern void ide_execute_command(ide_drive_t *, task_ioreg_t cmd, ide_handler_t *, unsigned int, ide_expiry_t *);
ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8);
-/*
- * ide_error() takes action based on the error returned by the controller.
- * The caller should return immediately after invoking this.
- *
- * (drive, msg, status)
- */
ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat);
ide_startstop_t __ide_abort(ide_drive_t *, struct request *);
-/*
- * Abort a running command on the controller triggering the abort
- * from a host side, non error situation
- * (drive, msg)
- */
extern ide_startstop_t ide_abort(ide_drive_t *, const char *);
extern void ide_fix_driveid(struct hd_driveid *);
-/*
- * ide_fixstring() cleans up and (optionally) byte-swaps a text string,
- * removing leading/trailing blanks and compressing internal blanks.
- * It is primarily used to tidy up the model name/number fields as
- * returned by the WIN_[P]IDENTIFY commands.
- *
- * (s, bytecount, byteswap)
- */
+
extern void ide_fixstring(u8 *, const int, const int);
int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
-/*
- * Start a reset operation for an IDE interface.
- * The caller should return immediately after invoking this.
- */
extern ide_startstop_t ide_do_reset (ide_drive_t *);
-/*
- * This function is intended to be used prior to invoking ide_do_drive_cmd().
- */
extern void ide_init_drive_cmd (struct request *rq);
/*
extern int ide_do_drive_cmd(ide_drive_t *, struct request *, ide_action_t);
-/*
- * Clean up after success/failure of an explicit drive cmd.
- * stat/err are used only when (HWGROUP(drive)->rq->cmd == IDE_DRIVE_CMD).
- * stat/err are used only when (HWGROUP(drive)->rq->cmd == IDE_DRIVE_TASK_MASK).
- *
- * (ide_drive_t *drive, u8 stat, u8 err)
- */
extern void ide_end_drive_cmd(ide_drive_t *, u8, u8);
/*
extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);
-/*
- * ide_stall_queue() can be used by a drive to give excess bandwidth back
- * to the hwgroup by sleeping for timeout jiffies.
- */
extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout);
extern int ide_spin_wait_hwgroup(ide_drive_t *);
#define ide_pci_register_driver(d) pci_register_driver(d)
#endif
-void ide_pci_setup_ports(struct pci_dev *, struct ide_pci_device_s *, int, u8 *);
-extern void ide_setup_pci_noise (struct pci_dev *dev, struct ide_pci_device_s *d);
+void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int, u8 *);
+void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
extern void default_hwif_iops(ide_hwif_t *);
extern void default_hwif_mmiops(ide_hwif_t *);
# define IDE_HFLAG_OFF_BOARD 0
#endif
-typedef struct ide_pci_device_s {
+struct ide_port_info {
char *name;
unsigned int (*init_chipset)(struct pci_dev *, const char *);
void (*init_iops)(ide_hwif_t *);
u8 swdma_mask;
u8 mwdma_mask;
u8 udma_mask;
-} ide_pci_device_t;
+};
-extern int ide_setup_pci_device(struct pci_dev *, ide_pci_device_t *);
-extern int ide_setup_pci_devices(struct pci_dev *, struct pci_dev *, ide_pci_device_t *);
+int ide_setup_pci_device(struct pci_dev *, const struct ide_port_info *);
+int ide_setup_pci_devices(struct pci_dev *, struct pci_dev *, const struct ide_port_info *);
void ide_map_sg(ide_drive_t *, struct request *);
void ide_init_sg_cmd(ide_drive_t *, struct request *);
#ifdef CONFIG_BLK_DEV_IDEDMA
int __ide_dma_bad_drive(ide_drive_t *);
+int ide_id_dma_bug(ide_drive_t *);
u8 ide_find_dma_mode(ide_drive_t *, u8);
}
void ide_dma_off(ide_drive_t *);
-void ide_dma_verbose(ide_drive_t *);
int ide_set_dma(ide_drive_t *);
ide_startstop_t ide_dma_intr(ide_drive_t *);
#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
#else
+static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; }
static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
static inline void ide_dma_off(ide_drive_t *drive) { ; }
hwif->hwif_data = data;
}
-/* ide-lib.c */
-extern char *ide_xfer_verbose(u8 xfer_rate);
+const char *ide_xfer_verbose(u8 mode);
extern void ide_toggle_bounce(ide_drive_t *drive, int on);
extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);
projects / firefly-linux-kernel-4.4.55.git / blobdiff