#include <linux/fs.h>
#include <linux/file.h>
#include <linux/pagemap.h>
-#include <linux/pipe_fs_i.h>
+#include <linux/splice.h>
#include <linux/mm_inline.h>
#include <linux/swap.h>
#include <linux/writeback.h>
#include <linux/module.h>
#include <linux/syscalls.h>
#include <linux/uio.h>
-
-struct partial_page {
- unsigned int offset;
- unsigned int len;
-};
-
-/*
- * Passed to splice_to_pipe
- */
-struct splice_pipe_desc {
- struct page **pages; /* page map */
- struct partial_page *partial; /* pages[] may not be contig */
- int nr_pages; /* number of pages in map */
- unsigned int flags; /* splice flags */
- const struct pipe_buf_operations *ops;/* ops associated with output pipe */
-};
+#include <linux/security.h>
/*
* Attempt to steal a page from a pipe buffer. This should perhaps go into
buf->flags &= ~PIPE_BUF_FLAG_LRU;
}
-static int page_cache_pipe_buf_pin(struct pipe_inode_info *pipe,
- struct pipe_buffer *buf)
+/*
+ * Check whether the contents of buf is OK to access. Since the content
+ * is a page cache page, IO may be in flight.
+ */
+static int page_cache_pipe_buf_confirm(struct pipe_inode_info *pipe,
+ struct pipe_buffer *buf)
{
struct page *page = buf->page;
int err;
.can_merge = 0,
.map = generic_pipe_buf_map,
.unmap = generic_pipe_buf_unmap,
- .pin = page_cache_pipe_buf_pin,
+ .confirm = page_cache_pipe_buf_confirm,
.release = page_cache_pipe_buf_release,
.steal = page_cache_pipe_buf_steal,
.get = generic_pipe_buf_get,
.can_merge = 0,
.map = generic_pipe_buf_map,
.unmap = generic_pipe_buf_unmap,
- .pin = generic_pipe_buf_pin,
+ .confirm = generic_pipe_buf_confirm,
.release = page_cache_pipe_buf_release,
.steal = user_page_pipe_buf_steal,
.get = generic_pipe_buf_get,
};
-/*
- * Pipe output worker. This sets up our pipe format with the page cache
- * pipe buffer operations. Otherwise very similar to the regular pipe_writev().
+/**
+ * splice_to_pipe - fill passed data into a pipe
+ * @pipe: pipe to fill
+ * @spd: data to fill
+ *
+ * Description:
+ * @spd contains a map of pages and len/offset tuples, along with
+ * the struct pipe_buf_operations associated with these pages. This
+ * function will link that data to the pipe.
+ *
*/
-static ssize_t splice_to_pipe(struct pipe_inode_info *pipe,
- struct splice_pipe_desc *spd)
+ssize_t splice_to_pipe(struct pipe_inode_info *pipe,
+ struct splice_pipe_desc *spd)
{
+ unsigned int spd_pages = spd->nr_pages;
int ret, do_wakeup, page_nr;
ret = 0;
buf->page = spd->pages[page_nr];
buf->offset = spd->partial[page_nr].offset;
buf->len = spd->partial[page_nr].len;
+ buf->private = spd->partial[page_nr].private;
buf->ops = spd->ops;
if (spd->flags & SPLICE_F_GIFT)
buf->flags |= PIPE_BUF_FLAG_GIFT;
pipe->waiting_writers--;
}
- if (pipe->inode)
+ if (pipe->inode) {
mutex_unlock(&pipe->inode->i_mutex);
- if (do_wakeup) {
- smp_mb();
- if (waitqueue_active(&pipe->wait))
- wake_up_interruptible(&pipe->wait);
- kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
+ if (do_wakeup) {
+ smp_mb();
+ if (waitqueue_active(&pipe->wait))
+ wake_up_interruptible(&pipe->wait);
+ kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
+ }
}
- while (page_nr < spd->nr_pages)
+ while (page_nr < spd_pages)
page_cache_release(spd->pages[page_nr++]);
return ret;
unsigned int flags)
{
struct address_space *mapping = in->f_mapping;
- unsigned int loff, nr_pages;
+ unsigned int loff, nr_pages, req_pages;
struct page *pages[PIPE_BUFFERS];
struct partial_page partial[PIPE_BUFFERS];
struct page *page;
pgoff_t index, end_index;
loff_t isize;
- size_t total_len;
int error, page_nr;
struct splice_pipe_desc spd = {
.pages = pages,
index = *ppos >> PAGE_CACHE_SHIFT;
loff = *ppos & ~PAGE_CACHE_MASK;
- nr_pages = (len + loff + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
-
- if (nr_pages > PIPE_BUFFERS)
- nr_pages = PIPE_BUFFERS;
-
- /*
- * Don't try to 2nd guess the read-ahead logic, call into
- * page_cache_readahead() like the page cache reads would do.
- */
- page_cache_readahead(mapping, &in->f_ra, in, index, nr_pages);
-
- /*
- * Now fill in the holes:
- */
- error = 0;
- total_len = 0;
+ req_pages = (len + loff + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
+ nr_pages = min(req_pages, (unsigned)PIPE_BUFFERS);
/*
* Lookup the (hopefully) full range of pages we need.
*/
spd.nr_pages = find_get_pages_contig(mapping, index, nr_pages, pages);
+ index += spd.nr_pages;
/*
* If find_get_pages_contig() returned fewer pages than we needed,
- * allocate the rest.
+ * readahead/allocate the rest and fill in the holes.
*/
- index += spd.nr_pages;
+ if (spd.nr_pages < nr_pages)
+ page_cache_sync_readahead(mapping, &in->f_ra, in,
+ index, req_pages - spd.nr_pages);
+
+ error = 0;
while (spd.nr_pages < nr_pages) {
/*
* Page could be there, find_get_pages_contig() breaks on
*/
page = find_get_page(mapping, index);
if (!page) {
- /*
- * Make sure the read-ahead engine is notified
- * about this failure.
- */
- handle_ra_miss(mapping, &in->f_ra, index);
-
/*
* page didn't exist, allocate one.
*/
this_len = min_t(unsigned long, len, PAGE_CACHE_SIZE - loff);
page = pages[page_nr];
+ if (PageReadahead(page))
+ page_cache_async_readahead(mapping, &in->f_ra, in,
+ page, index, req_pages - page_nr);
+
/*
* If the page isn't uptodate, we may need to start io on it
*/
break;
}
+ }
+fill_it:
+ /*
+ * i_size must be checked after PageUptodate.
+ */
+ isize = i_size_read(mapping->host);
+ end_index = (isize - 1) >> PAGE_CACHE_SHIFT;
+ if (unlikely(!isize || index > end_index))
+ break;
+
+ /*
+ * if this is the last page, see if we need to shrink
+ * the length and stop
+ */
+ if (end_index == index) {
+ unsigned int plen;
/*
- * i_size must be checked after ->readpage().
+ * max good bytes in this page
*/
- isize = i_size_read(mapping->host);
- end_index = (isize - 1) >> PAGE_CACHE_SHIFT;
- if (unlikely(!isize || index > end_index))
+ plen = ((isize - 1) & ~PAGE_CACHE_MASK) + 1;
+ if (plen <= loff)
break;
/*
- * if this is the last page, see if we need to shrink
- * the length and stop
+ * force quit after adding this page
*/
- if (end_index == index) {
- loff = PAGE_CACHE_SIZE - (isize & ~PAGE_CACHE_MASK);
- if (total_len + loff > isize)
- break;
- /*
- * force quit after adding this page
- */
- len = this_len;
- this_len = min(this_len, loff);
- loff = 0;
- }
+ this_len = min(this_len, plen - loff);
+ len = this_len;
}
-fill_it:
+
partial[page_nr].offset = loff;
partial[page_nr].len = this_len;
len -= this_len;
- total_len += this_len;
loff = 0;
spd.nr_pages++;
index++;
}
/*
- * Release any pages at the end, if we quit early. 'i' is how far
+ * Release any pages at the end, if we quit early. 'page_nr' is how far
* we got, 'nr_pages' is how many pages are in the map.
*/
while (page_nr < nr_pages)
page_cache_release(pages[page_nr++]);
+ in->f_ra.prev_pos = (loff_t)index << PAGE_CACHE_SHIFT;
if (spd.nr_pages)
return splice_to_pipe(pipe, &spd);
/**
* generic_file_splice_read - splice data from file to a pipe
* @in: file to splice from
+ * @ppos: position in @in
* @pipe: pipe to splice to
* @len: number of bytes to splice
* @flags: splice modifier flags
*
- * Will read pages from given file and fill them into a pipe.
+ * Description:
+ * Will read pages from given file and fill them into a pipe. Can be
+ * used as long as the address_space operations for the source implements
+ * a readpage() hook.
+ *
*/
ssize_t generic_file_splice_read(struct file *in, loff_t *ppos,
struct pipe_inode_info *pipe, size_t len,
{
ssize_t spliced;
int ret;
+ loff_t isize, left;
+
+ isize = i_size_read(in->f_mapping->host);
+ if (unlikely(*ppos >= isize))
+ return 0;
+
+ left = isize - *ppos;
+ if (unlikely(left < len))
+ len = left;
ret = 0;
spliced = 0;
-
- while (len) {
+ while (len && !spliced) {
ret = __generic_file_splice_read(in, ppos, pipe, len, flags);
if (ret < 0)
static int pipe_to_sendpage(struct pipe_inode_info *pipe,
struct pipe_buffer *buf, struct splice_desc *sd)
{
- struct file *file = sd->file;
+ struct file *file = sd->u.file;
loff_t pos = sd->pos;
int ret, more;
- ret = buf->ops->pin(pipe, buf);
+ ret = buf->ops->confirm(pipe, buf);
if (!ret) {
more = (sd->flags & SPLICE_F_MORE) || sd->len < sd->total_len;
static int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
struct splice_desc *sd)
{
- struct file *file = sd->file;
+ struct file *file = sd->u.file;
struct address_space *mapping = file->f_mapping;
unsigned int offset, this_len;
struct page *page;
- pgoff_t index;
+ void *fsdata;
int ret;
/*
* make sure the data in this buffer is uptodate
*/
- ret = buf->ops->pin(pipe, buf);
+ ret = buf->ops->confirm(pipe, buf);
if (unlikely(ret))
return ret;
- index = sd->pos >> PAGE_CACHE_SHIFT;
offset = sd->pos & ~PAGE_CACHE_MASK;
this_len = sd->len;
if (this_len + offset > PAGE_CACHE_SIZE)
this_len = PAGE_CACHE_SIZE - offset;
-find_page:
- page = find_lock_page(mapping, index);
- if (!page) {
- ret = -ENOMEM;
- page = page_cache_alloc_cold(mapping);
- if (unlikely(!page))
- goto out_ret;
-
- /*
- * This will also lock the page
- */
- ret = add_to_page_cache_lru(page, mapping, index,
- GFP_KERNEL);
- if (unlikely(ret))
- goto out;
- }
-
- ret = mapping->a_ops->prepare_write(file, page, offset, offset+this_len);
- if (unlikely(ret)) {
- loff_t isize = i_size_read(mapping->host);
-
- if (ret != AOP_TRUNCATED_PAGE)
- unlock_page(page);
- page_cache_release(page);
- if (ret == AOP_TRUNCATED_PAGE)
- goto find_page;
-
- /*
- * prepare_write() may have instantiated a few blocks
- * outside i_size. Trim these off again.
- */
- if (sd->pos + this_len > isize)
- vmtruncate(mapping->host, isize);
-
- goto out_ret;
- }
+ ret = pagecache_write_begin(file, mapping, sd->pos, this_len,
+ AOP_FLAG_UNINTERRUPTIBLE, &page, &fsdata);
+ if (unlikely(ret))
+ goto out;
if (buf->page != page) {
/*
kunmap_atomic(dst, KM_USER1);
buf->ops->unmap(pipe, buf, src);
}
-
- ret = mapping->a_ops->commit_write(file, page, offset, offset+this_len);
- if (ret) {
- if (ret == AOP_TRUNCATED_PAGE) {
- page_cache_release(page);
- goto find_page;
- }
- if (ret < 0)
- goto out;
- /*
- * Partial write has happened, so 'ret' already initialized by
- * number of bytes written, Where is nothing we have to do here.
- */
- } else
- ret = this_len;
- /*
- * Return the number of bytes written and mark page as
- * accessed, we are now done!
- */
- mark_page_accessed(page);
- balance_dirty_pages_ratelimited(mapping);
+ ret = pagecache_write_end(file, mapping, sd->pos, this_len, this_len,
+ page, fsdata);
out:
- page_cache_release(page);
- unlock_page(page);
-out_ret:
return ret;
}
-/*
- * Pipe input worker. Most of this logic works like a regular pipe, the
- * key here is the 'actor' worker passed in that actually moves the data
- * to the wanted destination. See pipe_to_file/pipe_to_sendpage above.
+/**
+ * __splice_from_pipe - splice data from a pipe to given actor
+ * @pipe: pipe to splice from
+ * @sd: information to @actor
+ * @actor: handler that splices the data
+ *
+ * Description:
+ * This function does little more than loop over the pipe and call
+ * @actor to do the actual moving of a single struct pipe_buffer to
+ * the desired destination. See pipe_to_file, pipe_to_sendpage, or
+ * pipe_to_user.
+ *
*/
-ssize_t __splice_from_pipe(struct pipe_inode_info *pipe,
- struct file *out, loff_t *ppos, size_t len,
- unsigned int flags, splice_actor *actor)
+ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd,
+ splice_actor *actor)
{
int ret, do_wakeup, err;
- struct splice_desc sd;
ret = 0;
do_wakeup = 0;
- sd.total_len = len;
- sd.flags = flags;
- sd.file = out;
- sd.pos = *ppos;
-
for (;;) {
if (pipe->nrbufs) {
struct pipe_buffer *buf = pipe->bufs + pipe->curbuf;
const struct pipe_buf_operations *ops = buf->ops;
- sd.len = buf->len;
- if (sd.len > sd.total_len)
- sd.len = sd.total_len;
+ sd->len = buf->len;
+ if (sd->len > sd->total_len)
+ sd->len = sd->total_len;
- err = actor(pipe, buf, &sd);
+ err = actor(pipe, buf, sd);
if (err <= 0) {
if (!ret && err != -ENODATA)
ret = err;
buf->offset += err;
buf->len -= err;
- sd.len -= err;
- sd.pos += err;
- sd.total_len -= err;
- if (sd.len)
+ sd->len -= err;
+ sd->pos += err;
+ sd->total_len -= err;
+ if (sd->len)
continue;
if (!buf->len) {
do_wakeup = 1;
}
- if (!sd.total_len)
+ if (!sd->total_len)
break;
}
break;
}
- if (flags & SPLICE_F_NONBLOCK) {
+ if (sd->flags & SPLICE_F_NONBLOCK) {
if (!ret)
ret = -EAGAIN;
break;
}
EXPORT_SYMBOL(__splice_from_pipe);
+/**
+ * splice_from_pipe - splice data from a pipe to a file
+ * @pipe: pipe to splice from
+ * @out: file to splice to
+ * @ppos: position in @out
+ * @len: how many bytes to splice
+ * @flags: splice modifier flags
+ * @actor: handler that splices the data
+ *
+ * Description:
+ * See __splice_from_pipe. This function locks the input and output inodes,
+ * otherwise it's identical to __splice_from_pipe().
+ *
+ */
ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out,
loff_t *ppos, size_t len, unsigned int flags,
splice_actor *actor)
{
ssize_t ret;
struct inode *inode = out->f_mapping->host;
+ struct splice_desc sd = {
+ .total_len = len,
+ .flags = flags,
+ .pos = *ppos,
+ .u.file = out,
+ };
/*
* The actor worker might be calling ->prepare_write and
* pipe->inode, we have to order lock acquiry here.
*/
inode_double_lock(inode, pipe->inode);
- ret = __splice_from_pipe(pipe, out, ppos, len, flags, actor);
+ ret = __splice_from_pipe(pipe, &sd, actor);
inode_double_unlock(inode, pipe->inode);
return ret;
* generic_file_splice_write_nolock - generic_file_splice_write without mutexes
* @pipe: pipe info
* @out: file to write to
+ * @ppos: position in @out
* @len: number of bytes to splice
* @flags: splice modifier flags
*
- * Will either move or copy pages (determined by @flags options) from
- * the given pipe inode to the given file. The caller is responsible
- * for acquiring i_mutex on both inodes.
+ * Description:
+ * Will either move or copy pages (determined by @flags options) from
+ * the given pipe inode to the given file. The caller is responsible
+ * for acquiring i_mutex on both inodes.
*
*/
ssize_t
{
struct address_space *mapping = out->f_mapping;
struct inode *inode = mapping->host;
+ struct splice_desc sd = {
+ .total_len = len,
+ .flags = flags,
+ .pos = *ppos,
+ .u.file = out,
+ };
ssize_t ret;
int err;
if (unlikely(err))
return err;
- ret = __splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_file);
+ ret = __splice_from_pipe(pipe, &sd, pipe_to_file);
if (ret > 0) {
+ unsigned long nr_pages;
+
*ppos += ret;
+ nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
/*
* If file or inode is SYNC and we actually wrote some data,
if (err)
ret = err;
}
+ balance_dirty_pages_ratelimited_nr(mapping, nr_pages);
}
return ret;
* generic_file_splice_write - splice data from a pipe to a file
* @pipe: pipe info
* @out: file to write to
+ * @ppos: position in @out
* @len: number of bytes to splice
* @flags: splice modifier flags
*
- * Will either move or copy pages (determined by @flags options) from
- * the given pipe inode to the given file.
+ * Description:
+ * Will either move or copy pages (determined by @flags options) from
+ * the given pipe inode to the given file.
*
*/
ssize_t
ret = splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_file);
if (ret > 0) {
+ unsigned long nr_pages;
+
*ppos += ret;
+ nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
/*
* If file or inode is SYNC and we actually wrote some data,
if (err)
ret = err;
}
+ balance_dirty_pages_ratelimited_nr(mapping, nr_pages);
}
return ret;
/**
* generic_splice_sendpage - splice data from a pipe to a socket
- * @inode: pipe inode
+ * @pipe: pipe to splice from
* @out: socket to write to
+ * @ppos: position in @out
* @len: number of bytes to splice
* @flags: splice modifier flags
*
- * Will send @len bytes from the pipe to a network socket. No data copying
- * is involved.
+ * Description:
+ * Will send @len bytes from the pipe to a network socket. No data copying
+ * is involved.
*
*/
ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe, struct file *out,
if (unlikely(ret < 0))
return ret;
+ ret = security_file_permission(out, MAY_WRITE);
+ if (unlikely(ret < 0))
+ return ret;
+
return out->f_op->splice_write(pipe, out, ppos, len, flags);
}
struct pipe_inode_info *pipe, size_t len,
unsigned int flags)
{
- loff_t isize, left;
int ret;
if (unlikely(!in->f_op || !in->f_op->splice_read))
if (unlikely(ret < 0))
return ret;
- isize = i_size_read(in->f_mapping->host);
- if (unlikely(*ppos >= isize))
- return 0;
-
- left = isize - *ppos;
- if (unlikely(left < len))
- len = left;
+ ret = security_file_permission(in, MAY_READ);
+ if (unlikely(ret < 0))
+ return ret;
return in->f_op->splice_read(in, ppos, pipe, len, flags);
}
-long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
- size_t len, unsigned int flags)
+/**
+ * splice_direct_to_actor - splices data directly between two non-pipes
+ * @in: file to splice from
+ * @sd: actor information on where to splice to
+ * @actor: handles the data splicing
+ *
+ * Description:
+ * This is a special case helper to splice directly between two
+ * points, without requiring an explicit pipe. Internally an allocated
+ * pipe is cached in the process, and reused during the lifetime of
+ * that process.
+ *
+ */
+ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd,
+ splice_direct_actor *actor)
{
struct pipe_inode_info *pipe;
long ret, bytes;
- loff_t out_off;
umode_t i_mode;
- int i;
+ size_t len;
+ int i, flags;
/*
* We require the input being a regular file, as we don't want to
*/
ret = 0;
bytes = 0;
- out_off = 0;
+ len = sd->total_len;
+ flags = sd->flags;
- while (len) {
- size_t read_len, max_read_len;
+ /*
+ * Don't block on output, we have to drain the direct pipe.
+ */
+ sd->flags &= ~SPLICE_F_NONBLOCK;
- /*
- * Do at most PIPE_BUFFERS pages worth of transfer:
- */
- max_read_len = min(len, (size_t)(PIPE_BUFFERS*PAGE_SIZE));
+ while (len) {
+ size_t read_len;
+ loff_t pos = sd->pos;
- ret = do_splice_to(in, ppos, pipe, max_read_len, flags);
- if (unlikely(ret < 0))
+ ret = do_splice_to(in, &pos, pipe, len, flags);
+ if (unlikely(ret <= 0))
goto out_release;
read_len = ret;
+ sd->total_len = read_len;
/*
* NOTE: nonblocking mode only applies to the input. We
* must not do the output in nonblocking mode as then we
* could get stuck data in the internal pipe:
*/
- ret = do_splice_from(pipe, out, &out_off, read_len,
- flags & ~SPLICE_F_NONBLOCK);
- if (unlikely(ret < 0))
+ ret = actor(pipe, sd);
+ if (unlikely(ret <= 0))
goto out_release;
bytes += ret;
len -= ret;
+ sd->pos = pos;
- /*
- * In nonblocking mode, if we got back a short read then
- * that was due to either an IO error or due to the
- * pagecache entry not being there. In the IO error case
- * the _next_ splice attempt will produce a clean IO error
- * return value (not a short read), so in both cases it's
- * correct to break out of the loop here:
- */
- if ((flags & SPLICE_F_NONBLOCK) && (read_len < max_read_len))
- break;
+ if (ret < read_len)
+ goto out_release;
}
pipe->nrbufs = pipe->curbuf = 0;
-
return bytes;
out_release:
return bytes;
return ret;
+
+}
+EXPORT_SYMBOL(splice_direct_to_actor);
+
+static int direct_splice_actor(struct pipe_inode_info *pipe,
+ struct splice_desc *sd)
+{
+ struct file *file = sd->u.file;
+
+ return do_splice_from(pipe, file, &sd->pos, sd->total_len, sd->flags);
}
-EXPORT_SYMBOL(do_splice_direct);
+/**
+ * do_splice_direct - splices data directly between two files
+ * @in: file to splice from
+ * @ppos: input file offset
+ * @out: file to splice to
+ * @len: number of bytes to splice
+ * @flags: splice modifier flags
+ *
+ * Description:
+ * For use by do_sendfile(). splice can easily emulate sendfile, but
+ * doing it in the application would incur an extra system call
+ * (splice in + splice out, as compared to just sendfile()). So this helper
+ * can splice directly through a process-private pipe.
+ *
+ */
+long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
+ size_t len, unsigned int flags)
+{
+ struct splice_desc sd = {
+ .len = len,
+ .total_len = len,
+ .flags = flags,
+ .pos = *ppos,
+ .u.file = out,
+ };
+ long ret;
+
+ ret = splice_direct_to_actor(in, &sd, direct_splice_actor);
+ if (ret > 0)
+ *ppos += ret;
+
+ return ret;
+}
/*
* After the inode slimming patch, i_pipe/i_bdev/i_cdev share the same
return -EINVAL;
}
+/*
+ * Do a copy-from-user while holding the mmap_semaphore for reading, in a
+ * manner safe from deadlocking with simultaneous mmap() (grabbing mmap_sem
+ * for writing) and page faulting on the user memory pointed to by src.
+ * This assumes that we will very rarely hit the partial != 0 path, or this
+ * will not be a win.
+ */
+static int copy_from_user_mmap_sem(void *dst, const void __user *src, size_t n)
+{
+ int partial;
+
+ pagefault_disable();
+ partial = __copy_from_user_inatomic(dst, src, n);
+ pagefault_enable();
+
+ /*
+ * Didn't copy everything, drop the mmap_sem and do a faulting copy
+ */
+ if (unlikely(partial)) {
+ up_read(¤t->mm->mmap_sem);
+ partial = copy_from_user(dst, src, n);
+ down_read(¤t->mm->mmap_sem);
+ }
+
+ return partial;
+}
+
/*
* Map an iov into an array of pages and offset/length tupples. With the
* partial_page structure, we can map several non-contiguous ranges into
{
int buffers = 0, error = 0;
- /*
- * It's ok to take the mmap_sem for reading, even
- * across a "get_user()".
- */
down_read(¤t->mm->mmap_sem);
while (nr_vecs) {
unsigned long off, npages;
+ struct iovec entry;
void __user *base;
size_t len;
int i;
- /*
- * Get user address base and length for this iovec.
- */
- error = get_user(base, &iov->iov_base);
- if (unlikely(error))
- break;
- error = get_user(len, &iov->iov_len);
- if (unlikely(error))
+ error = -EFAULT;
+ if (copy_from_user_mmap_sem(&entry, iov, sizeof(entry)))
break;
+ base = entry.iov_base;
+ len = entry.iov_len;
+
/*
* Sanity check this iovec. 0 read succeeds.
*/
+ error = 0;
if (unlikely(!len))
break;
error = -EFAULT;
return error;
}
+static int pipe_to_user(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
+ struct splice_desc *sd)
+{
+ char *src;
+ int ret;
+
+ ret = buf->ops->confirm(pipe, buf);
+ if (unlikely(ret))
+ return ret;
+
+ /*
+ * See if we can use the atomic maps, by prefaulting in the
+ * pages and doing an atomic copy
+ */
+ if (!fault_in_pages_writeable(sd->u.userptr, sd->len)) {
+ src = buf->ops->map(pipe, buf, 1);
+ ret = __copy_to_user_inatomic(sd->u.userptr, src + buf->offset,
+ sd->len);
+ buf->ops->unmap(pipe, buf, src);
+ if (!ret) {
+ ret = sd->len;
+ goto out;
+ }
+ }
+
+ /*
+ * No dice, use slow non-atomic map and copy
+ */
+ src = buf->ops->map(pipe, buf, 0);
+
+ ret = sd->len;
+ if (copy_to_user(sd->u.userptr, src + buf->offset, sd->len))
+ ret = -EFAULT;
+
+ buf->ops->unmap(pipe, buf, src);
+out:
+ if (ret > 0)
+ sd->u.userptr += ret;
+ return ret;
+}
+
+/*
+ * For lack of a better implementation, implement vmsplice() to userspace
+ * as a simple copy of the pipes pages to the user iov.
+ */
+static long vmsplice_to_user(struct file *file, const struct iovec __user *iov,
+ unsigned long nr_segs, unsigned int flags)
+{
+ struct pipe_inode_info *pipe;
+ struct splice_desc sd;
+ ssize_t size;
+ int error;
+ long ret;
+
+ pipe = pipe_info(file->f_path.dentry->d_inode);
+ if (!pipe)
+ return -EBADF;
+
+ if (pipe->inode)
+ mutex_lock(&pipe->inode->i_mutex);
+
+ error = ret = 0;
+ while (nr_segs) {
+ void __user *base;
+ size_t len;
+
+ /*
+ * Get user address base and length for this iovec.
+ */
+ error = get_user(base, &iov->iov_base);
+ if (unlikely(error))
+ break;
+ error = get_user(len, &iov->iov_len);
+ if (unlikely(error))
+ break;
+
+ /*
+ * Sanity check this iovec. 0 read succeeds.
+ */
+ if (unlikely(!len))
+ break;
+ if (unlikely(!base)) {
+ error = -EFAULT;
+ break;
+ }
+
+ sd.len = 0;
+ sd.total_len = len;
+ sd.flags = flags;
+ sd.u.userptr = base;
+ sd.pos = 0;
+
+ size = __splice_from_pipe(pipe, &sd, pipe_to_user);
+ if (size < 0) {
+ if (!ret)
+ ret = size;
+
+ break;
+ }
+
+ ret += size;
+
+ if (size < len)
+ break;
+
+ nr_segs--;
+ iov++;
+ }
+
+ if (pipe->inode)
+ mutex_unlock(&pipe->inode->i_mutex);
+
+ if (!ret)
+ ret = error;
+
+ return ret;
+}
+
/*
* vmsplice splices a user address range into a pipe. It can be thought of
* as splice-from-memory, where the regular splice is splice-from-file (or
* to file). In both cases the output is a pipe, naturally.
- *
- * Note that vmsplice only supports splicing _from_ user memory to a pipe,
- * not the other way around. Splicing from user memory is a simple operation
- * that can be supported without any funky alignment restrictions or nasty
- * vm tricks. We simply map in the user memory and fill them into a pipe.
- * The reverse isn't quite as easy, though. There are two possible solutions
- * for that:
- *
- * - memcpy() the data internally, at which point we might as well just
- * do a regular read() on the buffer anyway.
- * - Lots of nasty vm tricks, that are neither fast nor flexible (it
- * has restriction limitations on both ends of the pipe).
- *
- * Alas, it isn't here.
- *
*/
-static long do_vmsplice(struct file *file, const struct iovec __user *iov,
- unsigned long nr_segs, unsigned int flags)
+static long vmsplice_to_pipe(struct file *file, const struct iovec __user *iov,
+ unsigned long nr_segs, unsigned int flags)
{
struct pipe_inode_info *pipe;
struct page *pages[PIPE_BUFFERS];
pipe = pipe_info(file->f_path.dentry->d_inode);
if (!pipe)
return -EBADF;
- if (unlikely(nr_segs > UIO_MAXIOV))
- return -EINVAL;
- else if (unlikely(!nr_segs))
- return 0;
spd.nr_pages = get_iovec_page_array(iov, nr_segs, pages, partial,
flags & SPLICE_F_GIFT);
return splice_to_pipe(pipe, &spd);
}
+/*
+ * Note that vmsplice only really supports true splicing _from_ user memory
+ * to a pipe, not the other way around. Splicing from user memory is a simple
+ * operation that can be supported without any funky alignment restrictions
+ * or nasty vm tricks. We simply map in the user memory and fill them into
+ * a pipe. The reverse isn't quite as easy, though. There are two possible
+ * solutions for that:
+ *
+ * - memcpy() the data internally, at which point we might as well just
+ * do a regular read() on the buffer anyway.
+ * - Lots of nasty vm tricks, that are neither fast nor flexible (it
+ * has restriction limitations on both ends of the pipe).
+ *
+ * Currently we punt and implement it as a normal copy, see pipe_to_user().
+ *
+ */
asmlinkage long sys_vmsplice(int fd, const struct iovec __user *iov,
unsigned long nr_segs, unsigned int flags)
{
long error;
int fput;
+ if (unlikely(nr_segs > UIO_MAXIOV))
+ return -EINVAL;
+ else if (unlikely(!nr_segs))
+ return 0;
+
error = -EBADF;
file = fget_light(fd, &fput);
if (file) {
if (file->f_mode & FMODE_WRITE)
- error = do_vmsplice(file, iov, nr_segs, flags);
+ error = vmsplice_to_pipe(file, iov, nr_segs, flags);
+ else if (file->f_mode & FMODE_READ)
+ error = vmsplice_to_user(file, iov, nr_segs, flags);
fput_light(file, fput);
}