#include <linux/gfp.h>
#include <linux/module.h>
#include <linux/platform_data/atmel.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <video/of_display_timing.h>
+#include <video/videomode.h>
#include <mach/cpu.h>
#include <asm/gpio.h>
#include <video/atmel_lcdc.h>
+struct atmel_lcdfb_config {
+ bool have_alt_pixclock;
+ bool have_hozval;
+ bool have_intensity_bit;
+};
+
+ /* LCD Controller info data structure, stored in device platform_data */
+struct atmel_lcdfb_info {
+ spinlock_t lock;
+ struct fb_info *info;
+ void __iomem *mmio;
+ int irq_base;
+ struct work_struct task;
+
+ unsigned int smem_len;
+ struct platform_device *pdev;
+ struct clk *bus_clk;
+ struct clk *lcdc_clk;
+
+ struct backlight_device *backlight;
+ u8 bl_power;
+ u8 saved_lcdcon;
+
+ u32 pseudo_palette[16];
+ bool have_intensity_bit;
+
+ struct atmel_lcdfb_pdata pdata;
+
+ struct atmel_lcdfb_config *config;
+};
+
+struct atmel_lcdfb_power_ctrl_gpio {
+ int gpio;
+ int active_low;
+
+ struct list_head list;
+};
+
#define lcdc_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg))
#define lcdc_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg))
#define ATMEL_LCDC_DMA_BURST_LEN 8 /* words */
#define ATMEL_LCDC_FIFO_SIZE 512 /* words */
-struct atmel_lcdfb_config {
- bool have_alt_pixclock;
- bool have_hozval;
- bool have_intensity_bit;
-};
-
static struct atmel_lcdfb_config at91sam9261_config = {
.have_hozval = true,
.have_intensity_bit = true,
static void init_contrast(struct atmel_lcdfb_info *sinfo)
{
+ struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
+
/* contrast pwm can be 'inverted' */
- if (sinfo->lcdcon_pol_negative)
+ if (pdata->lcdcon_pol_negative)
contrast_ctr &= ~(ATMEL_LCDC_POL_POSITIVE);
/* have some default contrast/backlight settings */
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
- if (sinfo->lcdcon_is_backlight)
+ if (pdata->lcdcon_is_backlight)
init_backlight(sinfo);
}
+static inline void atmel_lcdfb_power_control(struct atmel_lcdfb_info *sinfo, int on)
+{
+ struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
+
+ if (pdata->atmel_lcdfb_power_control)
+ pdata->atmel_lcdfb_power_control(pdata, on);
+}
static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
.type = FB_TYPE_PACKED_PIXELS,
static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo)
{
+ struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
+
/* Turn off the LCD controller and the DMA controller */
lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
- sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
+ pdata->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
/* Wait for the LCDC core to become idle */
while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo)
{
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
+ struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
+
+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, pdata->default_dmacon);
lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
- (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET)
+ (pdata->guard_time << ATMEL_LCDC_GUARDT_OFFSET)
| ATMEL_LCDC_PWR);
}
{
struct device *dev = info->device;
struct atmel_lcdfb_info *sinfo = info->par;
+ struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
unsigned long clk_value_khz;
clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
else
var->green.length = 6;
- if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
+ if (pdata->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
/* RGB:5X5 mode */
var->red.offset = var->green.length + 5;
var->blue.offset = 0;
var->transp.length = 8;
/* fall through */
case 24:
- if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
+ if (pdata->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
/* RGB:888 mode */
var->red.offset = 16;
var->blue.offset = 0;
static int atmel_lcdfb_set_par(struct fb_info *info)
{
struct atmel_lcdfb_info *sinfo = info->par;
+ struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
unsigned long hozval_linesz;
unsigned long value;
unsigned long clk_value_khz;
/* Initialize control register 2 */
- value = sinfo->default_lcdcon2;
+ value = pdata->default_lcdcon2;
if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
value |= ATMEL_LCDC_INVLINE_INVERTED;
unsigned int transp, struct fb_info *info)
{
struct atmel_lcdfb_info *sinfo = info->par;
+ struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
unsigned int val;
u32 *pal;
int ret = 1;
*/
} else {
/* new style BGR:565 / RGB:565 */
- if (sinfo->lcd_wiring_mode ==
- ATMEL_LCDC_WIRING_RGB) {
+ if (pdata->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
val = ((blue >> 11) & 0x001f);
val |= ((red >> 0) & 0xf800);
} else {
clk_disable_unprepare(sinfo->lcdc_clk);
}
+#ifdef CONFIG_OF
+static const struct of_device_id atmel_lcdfb_dt_ids[] = {
+ { .compatible = "atmel,at91sam9261-lcdc" , .data = &at91sam9261_config, },
+ { .compatible = "atmel,at91sam9263-lcdc" , .data = &at91sam9263_config, },
+ { .compatible = "atmel,at91sam9g10-lcdc" , .data = &at91sam9g10_config, },
+ { .compatible = "atmel,at91sam9g45-lcdc" , .data = &at91sam9g45_config, },
+ { .compatible = "atmel,at91sam9g45es-lcdc" , .data = &at91sam9g45es_config, },
+ { .compatible = "atmel,at91sam9rl-lcdc" , .data = &at91sam9rl_config, },
+ { .compatible = "atmel,at32ap-lcdc" , .data = &at32ap_config, },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_lcdfb_dt_ids);
+
+static const char *atmel_lcdfb_wiring_modes[] = {
+ [ATMEL_LCDC_WIRING_BGR] = "BRG",
+ [ATMEL_LCDC_WIRING_RGB] = "RGB",
+};
+
+const int atmel_lcdfb_get_of_wiring_modes(struct device_node *np)
+{
+ const char *mode;
+ int err, i;
+
+ err = of_property_read_string(np, "atmel,lcd-wiring-mode", &mode);
+ if (err < 0)
+ return ATMEL_LCDC_WIRING_BGR;
+
+ for (i = 0; i < ARRAY_SIZE(atmel_lcdfb_wiring_modes); i++)
+ if (!strcasecmp(mode, atmel_lcdfb_wiring_modes[i]))
+ return i;
+
+ return -ENODEV;
+}
+
+static void atmel_lcdfb_power_control_gpio(struct atmel_lcdfb_pdata *pdata, int on)
+{
+ struct atmel_lcdfb_power_ctrl_gpio *og;
+
+ list_for_each_entry(og, &pdata->pwr_gpios, list)
+ gpio_set_value(og->gpio, on);
+}
+
+static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo)
+{
+ struct fb_info *info = sinfo->info;
+ struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
+ struct fb_var_screeninfo *var = &info->var;
+ struct device *dev = &sinfo->pdev->dev;
+ struct device_node *np =dev->of_node;
+ struct device_node *display_np;
+ struct device_node *timings_np;
+ struct display_timings *timings;
+ enum of_gpio_flags flags;
+ struct atmel_lcdfb_power_ctrl_gpio *og;
+ bool is_gpio_power = false;
+ int ret = -ENOENT;
+ int i, gpio;
+
+ sinfo->config = (struct atmel_lcdfb_config*)
+ of_match_device(atmel_lcdfb_dt_ids, dev)->data;
+
+ display_np = of_parse_phandle(np, "display", 0);
+ if (!display_np) {
+ dev_err(dev, "failed to find display phandle\n");
+ return -ENOENT;
+ }
+
+ ret = of_property_read_u32(display_np, "bits-per-pixel", &var->bits_per_pixel);
+ if (ret < 0) {
+ dev_err(dev, "failed to get property bits-per-pixel\n");
+ goto put_display_node;
+ }
+
+ ret = of_property_read_u32(display_np, "atmel,guard-time", &pdata->guard_time);
+ if (ret < 0) {
+ dev_err(dev, "failed to get property atmel,guard-time\n");
+ goto put_display_node;
+ }
+
+ ret = of_property_read_u32(display_np, "atmel,lcdcon2", &pdata->default_lcdcon2);
+ if (ret < 0) {
+ dev_err(dev, "failed to get property atmel,lcdcon2\n");
+ goto put_display_node;
+ }
+
+ ret = of_property_read_u32(display_np, "atmel,dmacon", &pdata->default_dmacon);
+ if (ret < 0) {
+ dev_err(dev, "failed to get property bits-per-pixel\n");
+ goto put_display_node;
+ }
+
+ ret = -ENOMEM;
+ for (i = 0; i < of_gpio_named_count(display_np, "atmel,power-control-gpio"); i++) {
+ gpio = of_get_named_gpio_flags(display_np, "atmel,power-control-gpio",
+ i, &flags);
+ if (gpio < 0)
+ continue;
+
+ og = devm_kzalloc(dev, sizeof(*og), GFP_KERNEL);
+ if (!og)
+ goto put_display_node;
+
+ og->gpio = gpio;
+ og->active_low = flags & OF_GPIO_ACTIVE_LOW;
+ is_gpio_power = true;
+ ret = devm_gpio_request(dev, gpio, "lcd-power-control-gpio");
+ if (ret) {
+ dev_err(dev, "request gpio %d failed\n", gpio);
+ goto put_display_node;
+ }
+
+ ret = gpio_direction_output(gpio, og->active_low);
+ if (ret) {
+ dev_err(dev, "set direction output gpio %d failed\n", gpio);
+ goto put_display_node;
+ }
+ }
+
+ if (is_gpio_power)
+ pdata->atmel_lcdfb_power_control = atmel_lcdfb_power_control_gpio;
+
+ ret = atmel_lcdfb_get_of_wiring_modes(display_np);
+ if (ret < 0) {
+ dev_err(dev, "invalid atmel,lcd-wiring-mode\n");
+ goto put_display_node;
+ }
+ pdata->lcd_wiring_mode = ret;
+
+ pdata->lcdcon_is_backlight = of_property_read_bool(display_np, "atmel,lcdcon-backlight");
+
+ timings = of_get_display_timings(display_np);
+ if (!timings) {
+ dev_err(dev, "failed to get display timings\n");
+ goto put_display_node;
+ }
+
+ timings_np = of_find_node_by_name(display_np, "display-timings");
+ if (!timings_np) {
+ dev_err(dev, "failed to find display-timings node\n");
+ goto put_display_node;
+ }
+
+ for (i = 0; i < of_get_child_count(timings_np); i++) {
+ struct videomode vm;
+ struct fb_videomode fb_vm;
+
+ ret = videomode_from_timings(timings, &vm, i);
+ if (ret < 0)
+ goto put_timings_node;
+ ret = fb_videomode_from_videomode(&vm, &fb_vm);
+ if (ret < 0)
+ goto put_timings_node;
+
+ fb_add_videomode(&fb_vm, &info->modelist);
+ }
+
+ return 0;
+
+put_timings_node:
+ of_node_put(timings_np);
+put_display_node:
+ of_node_put(display_np);
+ return ret;
+}
+#else
+static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo)
+{
+ return 0;
+}
+#endif
static int __init atmel_lcdfb_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct fb_info *info;
struct atmel_lcdfb_info *sinfo;
- struct atmel_lcdfb_info *pdata_sinfo;
- struct fb_videomode fbmode;
+ struct atmel_lcdfb_pdata *pdata = NULL;
struct resource *regs = NULL;
struct resource *map = NULL;
+ struct fb_modelist *modelist;
int ret;
dev_dbg(dev, "%s BEGIN\n", __func__);
}
sinfo = info->par;
+ sinfo->pdev = pdev;
+ sinfo->info = info;
+
+ INIT_LIST_HEAD(&info->modelist);
- if (dev->platform_data) {
- pdata_sinfo = (struct atmel_lcdfb_info *)dev->platform_data;
- sinfo->default_bpp = pdata_sinfo->default_bpp;
- sinfo->default_dmacon = pdata_sinfo->default_dmacon;
- sinfo->default_lcdcon2 = pdata_sinfo->default_lcdcon2;
- sinfo->default_monspecs = pdata_sinfo->default_monspecs;
- sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
- sinfo->guard_time = pdata_sinfo->guard_time;
- sinfo->smem_len = pdata_sinfo->smem_len;
- sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
- sinfo->lcdcon_pol_negative = pdata_sinfo->lcdcon_pol_negative;
- sinfo->lcd_wiring_mode = pdata_sinfo->lcd_wiring_mode;
+ if (pdev->dev.of_node) {
+ ret = atmel_lcdfb_of_init(sinfo);
+ if (ret)
+ goto free_info;
+ } else if (dev_get_platdata(dev)) {
+ struct fb_monspecs *monspecs;
+ int i;
+
+ pdata = dev_get_platdata(dev);
+ monspecs = pdata->default_monspecs;
+ sinfo->pdata = *pdata;
+
+ for (i = 0; i < monspecs->modedb_len; i++)
+ fb_add_videomode(&monspecs->modedb[i], &info->modelist);
+
+ sinfo->config = atmel_lcdfb_get_config(pdev);
+
+ info->var.bits_per_pixel = pdata->default_bpp ? pdata->default_bpp : 16;
+ memcpy(&info->monspecs, pdata->default_monspecs, sizeof(info->monspecs));
} else {
dev_err(dev, "cannot get default configuration\n");
goto free_info;
}
- sinfo->info = info;
- sinfo->pdev = pdev;
- sinfo->config = atmel_lcdfb_get_config(pdev);
+
if (!sinfo->config)
goto free_info;
info->pseudo_palette = sinfo->pseudo_palette;
info->fbops = &atmel_lcdfb_ops;
- memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
info->fix = atmel_lcdfb_fix;
/* Enable LCDC Clocks */
}
atmel_lcdfb_start_clock(sinfo);
- ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
- info->monspecs.modedb_len, info->monspecs.modedb,
- sinfo->default_bpp);
- if (!ret) {
- dev_err(dev, "no suitable video mode found\n");
- goto stop_clk;
- }
+ modelist = list_first_entry(&info->modelist,
+ struct fb_modelist, list);
+ fb_videomode_to_var(&info->var, &modelist->mode);
+ atmel_lcdfb_check_var(&info->var, info);
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!regs) {
goto unregister_irqs;
}
- /*
- * This makes sure that our colour bitfield
- * descriptors are correctly initialised.
- */
- atmel_lcdfb_check_var(&info->var, info);
-
- ret = fb_set_var(info, &info->var);
- if (ret) {
- dev_warn(dev, "unable to set display parameters\n");
- goto free_cmap;
- }
-
dev_set_drvdata(dev, info);
/*
goto reset_drvdata;
}
- /* add selected videomode to modelist */
- fb_var_to_videomode(&fbmode, &info->var);
- fb_add_videomode(&fbmode, &info->modelist);
-
/* Power up the LCDC screen */
- if (sinfo->atmel_lcdfb_power_control)
- sinfo->atmel_lcdfb_power_control(1);
+ atmel_lcdfb_power_control(sinfo, 1);
dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %d\n",
info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
reset_drvdata:
dev_set_drvdata(dev, NULL);
-free_cmap:
fb_dealloc_cmap(&info->cmap);
unregister_irqs:
cancel_work_sync(&sinfo->task);
struct device *dev = &pdev->dev;
struct fb_info *info = dev_get_drvdata(dev);
struct atmel_lcdfb_info *sinfo;
+ struct atmel_lcdfb_pdata *pdata;
if (!info || !info->par)
return 0;
sinfo = info->par;
+ pdata = &sinfo->pdata;
cancel_work_sync(&sinfo->task);
exit_backlight(sinfo);
- if (sinfo->atmel_lcdfb_power_control)
- sinfo->atmel_lcdfb_power_control(0);
+ atmel_lcdfb_power_control(sinfo, 0);
unregister_framebuffer(info);
atmel_lcdfb_stop_clock(sinfo);
clk_put(sinfo->lcdc_clk);
atmel_lcdfb_free_video_memory(sinfo);
}
- dev_set_drvdata(dev, NULL);
framebuffer_release(info);
return 0;
sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_CTR);
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
- if (sinfo->atmel_lcdfb_power_control)
- sinfo->atmel_lcdfb_power_control(0);
-
+ atmel_lcdfb_power_control(sinfo, 0);
atmel_lcdfb_stop(sinfo);
atmel_lcdfb_stop_clock(sinfo);
atmel_lcdfb_start_clock(sinfo);
atmel_lcdfb_start(sinfo);
- if (sinfo->atmel_lcdfb_power_control)
- sinfo->atmel_lcdfb_power_control(1);
+ atmel_lcdfb_power_control(sinfo, 1);
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
/* Enable FIFO & DMA errors */
.driver = {
.name = "atmel_lcdfb",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(atmel_lcdfb_dt_ids),
},
};
projects / firefly-linux-kernel-4.4.55.git / blobdiff