dev_dbg(musb->controller, "usbintr (%x) epintr(%x)\n",
usbintr, epintr);
- /*
- * DRVVBUS IRQs are the only proxy we have (a very poor one!) for
- * DSPS IP's missing ID change IRQ. We need an ID change IRQ to
- * switch appropriately between halves of the OTG state machine.
- * Managing DEVCTL.SESSION per Mentor docs requires that we know its
- * value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set.
- * Also, DRVVBUS pulses for SRP (but not at 5V) ...
- */
- if (is_host_active(musb) && usbintr & MUSB_INTR_BABBLE) {
- pr_info("CAUTION: musb: Babble Interrupt Occurred\n");
-
- /*
- * When a babble condition occurs, the musb controller removes
- * the session and is no longer in host mode. Hence, all
- * devices connected to its root hub get disconnected.
- *
- * Hand this error down to the musb core isr, so it can
- * recover.
- */
- musb->int_usb = MUSB_INTR_BABBLE | MUSB_INTR_DISCONNECT;
- musb->int_tx = musb->int_rx = 0;
- }
if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) {
int drvvbus = dsps_readl(reg_base, wrp->status);
if (IS_ERR(musb->xceiv))
return PTR_ERR(musb->xceiv);
+ musb->phy = devm_phy_get(dev->parent, "usb2-phy");
+
/* Returns zero if e.g. not clocked */
rev = dsps_readl(reg_base, wrp->revision);
if (!rev)
return -ENODEV;
usb_phy_init(musb->xceiv);
+ if (IS_ERR(musb->phy)) {
+ musb->phy = NULL;
+ } else {
+ ret = phy_init(musb->phy);
+ if (ret < 0)
+ return ret;
+ ret = phy_power_on(musb->phy);
+ if (ret) {
+ phy_exit(musb->phy);
+ return ret;
+ }
+ }
+
setup_timer(&glue->timer, otg_timer, (unsigned long) musb);
/* Reset the musb */
* logic enabled.
*/
val = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
- if (val == MUSB_BABBLE_RCV_DISABLE) {
+ if (val & MUSB_BABBLE_RCV_DISABLE) {
glue->sw_babble_enabled = true;
val |= MUSB_BABBLE_SW_SESSION_CTRL;
dsps_writeb(musb->mregs, MUSB_BABBLE_CTL, val);
del_timer_sync(&glue->timer);
usb_phy_shutdown(musb->xceiv);
+ phy_power_off(musb->phy);
+ phy_exit(musb->phy);
debugfs_remove_recursive(glue->dbgfs_root);
return 0;
return 0;
}
-static bool sw_babble_control(struct musb *musb)
+static bool dsps_sw_babble_control(struct musb *musb)
{
u8 babble_ctl;
bool session_restart = false;
{
struct device *dev = musb->controller;
struct dsps_glue *glue = dev_get_drvdata(dev->parent);
- const struct dsps_musb_wrapper *wrp = glue->wrp;
int session_restart = 0;
if (glue->sw_babble_enabled)
- session_restart = sw_babble_control(musb);
- /*
- * In case of new silicon version babble condition can be recovered
- * without resetting the MUSB. But for older silicon versions, MUSB
- * reset is needed
- */
- if (session_restart || !glue->sw_babble_enabled) {
- dev_info(musb->controller, "Restarting MUSB to recover from Babble\n");
- dsps_writel(musb->ctrl_base, wrp->control, (1 << wrp->reset));
- usleep_range(100, 200);
- usb_phy_shutdown(musb->xceiv);
- usleep_range(100, 200);
- usb_phy_init(musb->xceiv);
+ session_restart = dsps_sw_babble_control(musb);
+ else
session_restart = 1;
- }
- return !session_restart;
+ return session_restart ? 0 : -EPIPE;
}
static struct musb_platform_ops dsps_ops = {
struct musb_hdrc_config *config;
struct platform_device *musb;
struct device_node *dn = parent->dev.of_node;
- int ret;
+ int ret, val;
memset(resources, 0, sizeof(resources));
res = platform_get_resource_byname(parent, IORESOURCE_MEM, "mc");
pdata.mode = get_musb_port_mode(dev);
/* DT keeps this entry in mA, musb expects it as per USB spec */
pdata.power = get_int_prop(dn, "mentor,power") / 2;
- config->multipoint = of_property_read_bool(dn, "mentor,multipoint");
+
+ ret = of_property_read_u32(dn, "mentor,multipoint", &val);
+ if (!ret && val)
+ config->multipoint = true;
ret = platform_device_add_data(musb, &pdata, sizeof(pdata));
if (ret) {