#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
+#include <linux/pm_runtime.h>
#include <mach/usb_phy.h>
#include <mach/iomap.h>
struct clk *emc_clk;
struct usb_phy *transceiver;
int host_resumed;
- int bus_suspended;
int port_resuming;
- int power_down_on_bus_suspend;
enum tegra_usb_phy_port_speed port_speed;
};
up_write(&ehci_cf_port_reset_rwsem);
}
-static int tegra_usb_suspend(struct usb_hcd *hcd)
-{
- struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
- struct ehci_regs __iomem *hw = tegra->ehci->regs;
- unsigned long flags;
-
- spin_lock_irqsave(&tegra->ehci->lock, flags);
-
- tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3;
- ehci_halt(tegra->ehci);
- clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-
- spin_unlock_irqrestore(&tegra->ehci->lock, flags);
-
- tegra_ehci_power_down(hcd);
- return 0;
-}
-
-static int tegra_usb_resume(struct usb_hcd *hcd)
-{
- struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- struct ehci_regs __iomem *hw = ehci->regs;
- unsigned long val;
-
- set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- tegra_ehci_power_up(hcd);
-
- if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) {
- /* Wait for the phy to detect new devices
- * before we restart the controller */
- msleep(10);
- goto restart;
- }
-
- /* Force the phy to keep data lines in suspend state */
- tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed);
-
- /* Enable host mode */
- tdi_reset(ehci);
-
- /* Enable Port Power */
- val = readl(&hw->port_status[0]);
- val |= PORT_POWER;
- writel(val, &hw->port_status[0]);
- udelay(10);
-
- /* Check if the phy resume from LP0. When the phy resume from LP0
- * USB register will be reset. */
- if (!readl(&hw->async_next)) {
- /* Program the field PTC based on the saved speed mode */
- val = readl(&hw->port_status[0]);
- val &= ~PORT_TEST(~0);
- if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH)
- val |= PORT_TEST_FORCE;
- else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL)
- val |= PORT_TEST(6);
- else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
- val |= PORT_TEST(7);
- writel(val, &hw->port_status[0]);
- udelay(10);
-
- /* Disable test mode by setting PTC field to NORMAL_OP */
- val = readl(&hw->port_status[0]);
- val &= ~PORT_TEST(~0);
- writel(val, &hw->port_status[0]);
- udelay(10);
- }
-
- /* Poll until CCS is enabled */
- if (handshake(ehci, &hw->port_status[0], PORT_CONNECT,
- PORT_CONNECT, 2000)) {
- pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__);
- goto restart;
- }
-
- /* Poll until PE is enabled */
- if (handshake(ehci, &hw->port_status[0], PORT_PE,
- PORT_PE, 2000)) {
- pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__);
- goto restart;
- }
-
- /* Clear the PCI status, to avoid an interrupt taken upon resume */
- val = readl(&hw->status);
- val |= STS_PCD;
- writel(val, &hw->status);
-
- /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */
- val = readl(&hw->port_status[0]);
- if ((val & PORT_POWER) && (val & PORT_PE)) {
- val |= PORT_SUSPEND;
- writel(val, &hw->port_status[0]);
-
- /* Wait until port suspend completes */
- if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND,
- PORT_SUSPEND, 1000)) {
- pr_err("%s: timeout waiting for PORT_SUSPEND\n",
- __func__);
- goto restart;
- }
- }
-
- tegra_ehci_phy_restore_end(tegra->phy);
- return 0;
-
-restart:
- if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH)
- tegra_ehci_phy_restore_end(tegra->phy);
-
- tegra_ehci_restart(hcd);
- return 0;
-}
-
static void tegra_ehci_shutdown(struct usb_hcd *hcd)
{
struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
return retval;
}
-#ifdef CONFIG_PM
-static int tegra_ehci_bus_suspend(struct usb_hcd *hcd)
-{
- struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
- int error_status = 0;
-
- error_status = ehci_bus_suspend(hcd);
- if (!error_status && tegra->power_down_on_bus_suspend) {
- tegra_usb_suspend(hcd);
- tegra->bus_suspended = 1;
- }
-
- return error_status;
-}
-
-static int tegra_ehci_bus_resume(struct usb_hcd *hcd)
-{
- struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
-
- if (tegra->bus_suspended && tegra->power_down_on_bus_suspend) {
- tegra_usb_resume(hcd);
- tegra->bus_suspended = 0;
- }
-
- tegra_usb_phy_preresume(tegra->phy);
- tegra->port_resuming = 1;
- return ehci_bus_resume(hcd);
-}
-#endif
-
struct temp_buffer {
void *kmalloc_ptr;
void *old_xfer_buffer;
.hub_control = tegra_ehci_hub_control,
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
#ifdef CONFIG_PM
- .bus_suspend = tegra_ehci_bus_suspend,
- .bus_resume = tegra_ehci_bus_resume,
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
#endif
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
dev_err(&pdev->dev, "can't enable vbus\n");
return err;
}
- gpio_set_value(gpio, 1);
return err;
}
+#ifdef CONFIG_PM
+
+static int controller_suspend(struct device *dev)
+{
+ struct tegra_ehci_hcd *tegra =
+ platform_get_drvdata(to_platform_device(dev));
+ struct ehci_hcd *ehci = tegra->ehci;
+ struct usb_hcd *hcd = ehci_to_hcd(ehci);
+ struct ehci_regs __iomem *hw = ehci->regs;
+ unsigned long flags;
+
+ if (time_before(jiffies, ehci->next_statechange))
+ msleep(10);
+
+ spin_lock_irqsave(&ehci->lock, flags);
+
+ tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3;
+ ehci_halt(ehci);
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+ spin_unlock_irqrestore(&ehci->lock, flags);
+
+ tegra_ehci_power_down(hcd);
+ return 0;
+}
+
+static int controller_resume(struct device *dev)
+{
+ struct tegra_ehci_hcd *tegra =
+ platform_get_drvdata(to_platform_device(dev));
+ struct ehci_hcd *ehci = tegra->ehci;
+ struct usb_hcd *hcd = ehci_to_hcd(ehci);
+ struct ehci_regs __iomem *hw = ehci->regs;
+ unsigned long val;
+
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ tegra_ehci_power_up(hcd);
+
+ if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) {
+ /* Wait for the phy to detect new devices
+ * before we restart the controller */
+ msleep(10);
+ goto restart;
+ }
+
+ /* Force the phy to keep data lines in suspend state */
+ tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed);
+
+ /* Enable host mode */
+ tdi_reset(ehci);
+
+ /* Enable Port Power */
+ val = readl(&hw->port_status[0]);
+ val |= PORT_POWER;
+ writel(val, &hw->port_status[0]);
+ udelay(10);
+
+ /* Check if the phy resume from LP0. When the phy resume from LP0
+ * USB register will be reset. */
+ if (!readl(&hw->async_next)) {
+ /* Program the field PTC based on the saved speed mode */
+ val = readl(&hw->port_status[0]);
+ val &= ~PORT_TEST(~0);
+ if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH)
+ val |= PORT_TEST_FORCE;
+ else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL)
+ val |= PORT_TEST(6);
+ else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
+ val |= PORT_TEST(7);
+ writel(val, &hw->port_status[0]);
+ udelay(10);
+
+ /* Disable test mode by setting PTC field to NORMAL_OP */
+ val = readl(&hw->port_status[0]);
+ val &= ~PORT_TEST(~0);
+ writel(val, &hw->port_status[0]);
+ udelay(10);
+ }
+
+ /* Poll until CCS is enabled */
+ if (handshake(ehci, &hw->port_status[0], PORT_CONNECT,
+ PORT_CONNECT, 2000)) {
+ pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__);
+ goto restart;
+ }
+
+ /* Poll until PE is enabled */
+ if (handshake(ehci, &hw->port_status[0], PORT_PE,
+ PORT_PE, 2000)) {
+ pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__);
+ goto restart;
+ }
+
+ /* Clear the PCI status, to avoid an interrupt taken upon resume */
+ val = readl(&hw->status);
+ val |= STS_PCD;
+ writel(val, &hw->status);
+
+ /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */
+ val = readl(&hw->port_status[0]);
+ if ((val & PORT_POWER) && (val & PORT_PE)) {
+ val |= PORT_SUSPEND;
+ writel(val, &hw->port_status[0]);
+
+ /* Wait until port suspend completes */
+ if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND,
+ PORT_SUSPEND, 1000)) {
+ pr_err("%s: timeout waiting for PORT_SUSPEND\n",
+ __func__);
+ goto restart;
+ }
+ }
+
+ tegra_ehci_phy_restore_end(tegra->phy);
+ goto done;
+
+ restart:
+ if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH)
+ tegra_ehci_phy_restore_end(tegra->phy);
+
+ tegra_ehci_restart(hcd);
+
+ done:
+ tegra_usb_phy_preresume(tegra->phy);
+ tegra->port_resuming = 1;
+ return 0;
+}
+
+static int tegra_ehci_suspend(struct device *dev)
+{
+ struct tegra_ehci_hcd *tegra =
+ platform_get_drvdata(to_platform_device(dev));
+ struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
+ int rc = 0;
+
+ /*
+ * When system sleep is supported and USB controller wakeup is
+ * implemented: If the controller is runtime-suspended and the
+ * wakeup setting needs to be changed, call pm_runtime_resume().
+ */
+ if (HCD_HW_ACCESSIBLE(hcd))
+ rc = controller_suspend(dev);
+ return rc;
+}
+
+static int tegra_ehci_resume(struct device *dev)
+{
+ int rc;
+
+ rc = controller_resume(dev);
+ if (rc == 0) {
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ }
+ return rc;
+}
+
+static int tegra_ehci_runtime_suspend(struct device *dev)
+{
+ return controller_suspend(dev);
+}
+
+static int tegra_ehci_runtime_resume(struct device *dev)
+{
+ return controller_resume(dev);
+}
+
+static const struct dev_pm_ops tegra_ehci_pm_ops = {
+ .suspend = tegra_ehci_suspend,
+ .resume = tegra_ehci_resume,
+ .runtime_suspend = tegra_ehci_runtime_suspend,
+ .runtime_resume = tegra_ehci_runtime_resume,
+};
+
+#endif
+
static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32);
static int tegra_ehci_probe(struct platform_device *pdev)
}
tegra->host_resumed = 1;
- tegra->power_down_on_bus_suspend = pdata->power_down_on_bus_suspend;
tegra->ehci = hcd_to_ehci(hcd);
irq = platform_get_irq(pdev, 0);
goto fail;
}
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_get_noresume(&pdev->dev);
+
+ /* Don't skip the pm_runtime_forbid call if wakeup isn't working */
+ /* if (!pdata->power_down_on_bus_suspend) */
+ pm_runtime_forbid(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_put_sync(&pdev->dev);
return err;
fail:
return err;
}
-#ifdef CONFIG_PM
-static int tegra_ehci_resume(struct platform_device *pdev)
-{
- struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
- struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
-
- if (tegra->bus_suspended)
- return 0;
-
- return tegra_usb_resume(hcd);
-}
-
-static int tegra_ehci_suspend(struct platform_device *pdev, pm_message_t state)
-{
- struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
- struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
-
- if (tegra->bus_suspended)
- return 0;
-
- if (time_before(jiffies, tegra->ehci->next_statechange))
- msleep(10);
-
- return tegra_usb_suspend(hcd);
-}
-#endif
-
static int tegra_ehci_remove(struct platform_device *pdev)
{
struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
if (tegra == NULL || hcd == NULL)
return -EINVAL;
+ pm_runtime_get_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+
#ifdef CONFIG_USB_OTG_UTILS
if (tegra->transceiver) {
otg_set_host(tegra->transceiver->otg, NULL);
static struct platform_driver tegra_ehci_driver = {
.probe = tegra_ehci_probe,
.remove = tegra_ehci_remove,
-#ifdef CONFIG_PM
- .suspend = tegra_ehci_suspend,
- .resume = tegra_ehci_resume,
-#endif
.shutdown = tegra_ehci_hcd_shutdown,
.driver = {
.name = "tegra-ehci",
.of_match_table = tegra_ehci_of_match,
+#ifdef CONFIG_PM
+ .pm = &tegra_ehci_pm_ops,
+#endif
}
};
projects / firefly-linux-kernel-4.4.55.git / blobdiff