#undef DEBUG
-#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/ctype.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
#include <linux/errno.h>
-#include <linux/sh_dma.h>
-#include <linux/timer.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/sysrq.h>
#include <linux/ioport.h>
+#include <linux/major.h>
+#include <linux/module.h>
#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/console.h>
-#include <linux/platform_device.h>
-#include <linux/serial_sci.h>
#include <linux/notifier.h>
+#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/ctype.h>
-#include <linux/err.h>
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_dma.h>
#include <linux/slab.h>
-#include <linux/gpio.h>
+#include <linux/string.h>
+#include <linux/sysrq.h>
+#include <linux/timer.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
#ifdef CONFIG_SUPERH
#include <asm/sh_bios.h>
pm_runtime_get_sync(sci_port->port.dev);
- clk_enable(sci_port->iclk);
+ clk_prepare_enable(sci_port->iclk);
sci_port->port.uartclk = clk_get_rate(sci_port->iclk);
- clk_enable(sci_port->fclk);
+ clk_prepare_enable(sci_port->fclk);
}
static void sci_port_disable(struct sci_port *sci_port)
if (!sci_port->port.dev)
return;
- clk_disable(sci_port->fclk);
- clk_disable(sci_port->iclk);
+ /* Cancel the break timer to ensure that the timer handler will not try
+ * to access the hardware with clocks and power disabled. Reset the
+ * break flag to make the break debouncing state machine ready for the
+ * next break.
+ */
+ del_timer_sync(&sci_port->break_timer);
+ sci_port->break_flag = 0;
+
+ clk_disable_unprepare(sci_port->fclk);
+ clk_disable_unprepare(sci_port->iclk);
pm_runtime_put_sync(sci_port->port.dev);
}
return 1;
/* Cast for ARM damage */
- return !!__raw_readb((void __iomem *)s->cfg->port_reg);
+ return !!__raw_readb((void __iomem *)(uintptr_t)s->cfg->port_reg);
}
/* ********************************************************************** *
{
struct sci_port *port = (struct sci_port *)data;
- sci_port_enable(port);
-
if (sci_rxd_in(&port->port) == 0) {
port->break_flag = 1;
sci_schedule_break_timer(port);
sci_schedule_break_timer(port);
} else
port->break_flag = 0;
-
- sci_port_disable(port);
}
static int sci_handle_errors(struct uart_port *port)
}
if (room < count)
- dev_warn(port->dev, "Rx overrun: dropping %u bytes\n",
+ dev_warn(port->dev, "Rx overrun: dropping %zu bytes\n",
count - room);
if (!room)
return room;
int count;
chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
- dev_dbg(port->dev, "Read %u bytes with cookie %d\n",
+ dev_dbg(port->dev, "Read %zu bytes with cookie %d\n",
sh_desc->partial, sh_desc->cookie);
spin_lock_irqsave(&port->lock, flags);
s->chan_tx = chan;
sg_init_table(&s->sg_tx, 1);
/* UART circular tx buffer is an aligned page. */
- BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK);
+ BUG_ON((uintptr_t)port->state->xmit.buf & ~PAGE_MASK);
sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf),
- UART_XMIT_SIZE, (int)port->state->xmit.buf & ~PAGE_MASK);
+ UART_XMIT_SIZE,
+ (uintptr_t)port->state->xmit.buf & ~PAGE_MASK);
nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE);
if (!nent)
sci_tx_dma_release(s, false);
else
- dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__,
- sg_dma_len(&s->sg_tx),
- port->state->xmit.buf, sg_dma_address(&s->sg_tx));
+ dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", __func__,
+ sg_dma_len(&s->sg_tx), port->state->xmit.buf,
+ &sg_dma_address(&s->sg_tx));
s->sg_len_tx = nent;
sg_init_table(sg, 1);
sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx,
- (int)buf[i] & ~PAGE_MASK);
+ (uintptr_t)buf[i] & ~PAGE_MASK);
sg_dma_address(sg) = dma[i];
}
{
switch (algo_id) {
case SCBRR_ALGO_1:
- return ((freq + 16 * bps) / (16 * bps) - 1);
+ return freq / (16 * bps);
case SCBRR_ALGO_2:
- return ((freq + 16 * bps) / (32 * bps) - 1);
+ return DIV_ROUND_CLOSEST(freq, 32 * bps) - 1;
case SCBRR_ALGO_3:
- return (((freq * 2) + 16 * bps) / (16 * bps) - 1);
+ return freq / (8 * bps);
case SCBRR_ALGO_4:
- return (((freq * 2) + 16 * bps) / (32 * bps) - 1);
- case SCBRR_ALGO_5:
- return (((freq * 1000 / 32) / bps) - 1);
+ return DIV_ROUND_CLOSEST(freq, 16 * bps) - 1;
}
/* Warn, but use a safe default */
static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
{
- struct sci_port *s = to_sci_port(port);
-
- if (ser->irq != s->cfg->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs)
- return -EINVAL;
if (ser->baud_base < 2400)
/* No paper tape reader for Mitch.. */
return -EINVAL;
port->mapbase = p->mapbase;
port->type = p->type;
- port->flags = p->flags;
+ port->flags = UPF_FIXED_PORT | p->flags;
port->regshift = p->regshift;
/*