#include <asm/io.h>
#include <asm/irq.h>
+#include <asm/fs_pd.h>
#include <linux/serial_core.h>
#include <linux/kernel.h>
/**************************************************************/
-void cpm_line_cr_cmd(int line, int cmd)
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
+{
+ cpm_cpm2_t __iomem *cp = cpm2_map(im_cpm);
+
+ out_be32(&cp->cp_cpcr, port->command | cmd | CPM_CR_FLG);
+ while (in_be32(&cp->cp_cpcr) & CPM_CR_FLG)
+ ;
+
+ cpm2_unmap(cp);
+}
+#else
+void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
{
- volatile cpm_cpm2_t *cp = cpmp;
ulong val;
+ int line = port - cpm_uart_ports;
+ volatile cpm_cpm2_t *cp = cpm2_map(im_cpm);
+
switch (line) {
case UART_SMC1:
}
cp->cp_cpcr = val;
while (cp->cp_cpcr & CPM_CR_FLG) ;
+
+ cpm2_unmap(cp);
}
void smc1_lineif(struct uart_cpm_port *pinfo)
{
- volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+ volatile iop_cpm2_t *io = cpm2_map(im_ioport);
+ volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
/* SMC1 is only on port D */
io->iop_ppard |= 0x00c00000;
io->iop_psord &= ~0x00c00000;
/* Wire BRG1 to SMC1 */
- cpm2_immr->im_cpmux.cmx_smr &= 0x0f;
+ cpmux->cmx_smr &= 0x0f;
pinfo->brg = 1;
+
+ cpm2_unmap(cpmux);
+ cpm2_unmap(io);
}
void smc2_lineif(struct uart_cpm_port *pinfo)
{
- volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+ volatile iop_cpm2_t *io = cpm2_map(im_ioport);
+ volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
/* SMC2 is only on port A */
io->iop_ppara |= 0x00c00000;
io->iop_psora &= ~0x00c00000;
/* Wire BRG2 to SMC2 */
- cpm2_immr->im_cpmux.cmx_smr &= 0xf0;
+ cpmux->cmx_smr &= 0xf0;
pinfo->brg = 2;
+
+ cpm2_unmap(cpmux);
+ cpm2_unmap(io);
}
void scc1_lineif(struct uart_cpm_port *pinfo)
{
- volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+ volatile iop_cpm2_t *io = cpm2_map(im_ioport);
+ volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
/* Use Port D for SCC1 instead of other functions. */
io->iop_ppard |= 0x00000003;
io->iop_pdird |= 0x00000002; /* Tx */
/* Wire BRG1 to SCC1 */
- cpm2_immr->im_cpmux.cmx_scr &= 0x00ffffff;
- cpm2_immr->im_cpmux.cmx_scr |= 0x00000000;
+ cpmux->cmx_scr &= 0x00ffffff;
+ cpmux->cmx_scr |= 0x00000000;
pinfo->brg = 1;
+
+ cpm2_unmap(cpmux);
+ cpm2_unmap(io);
}
void scc2_lineif(struct uart_cpm_port *pinfo)
* be supported in a sane fashion.
*/
#ifndef CONFIG_STX_GP3
- volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+ volatile iop_cpm2_t *io = cpm2_map(im_ioport);
+ volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
+
io->iop_pparb |= 0x008b0000;
io->iop_pdirb |= 0x00880000;
io->iop_psorb |= 0x00880000;
io->iop_pdirb &= ~0x00030000;
io->iop_psorb &= ~0x00030000;
#endif
- cpm2_immr->im_cpmux.cmx_scr &= 0xff00ffff;
- cpm2_immr->im_cpmux.cmx_scr |= 0x00090000;
+ cpmux->cmx_scr &= 0xff00ffff;
+ cpmux->cmx_scr |= 0x00090000;
pinfo->brg = 2;
+
+ cpm2_unmap(cpmux);
+ cpm2_unmap(io);
}
void scc3_lineif(struct uart_cpm_port *pinfo)
{
- volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+ volatile iop_cpm2_t *io = cpm2_map(im_ioport);
+ volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
+
io->iop_pparb |= 0x008b0000;
io->iop_pdirb |= 0x00880000;
io->iop_psorb |= 0x00880000;
io->iop_pdirb &= ~0x00030000;
io->iop_psorb &= ~0x00030000;
- cpm2_immr->im_cpmux.cmx_scr &= 0xffff00ff;
- cpm2_immr->im_cpmux.cmx_scr |= 0x00001200;
+ cpmux->cmx_scr &= 0xffff00ff;
+ cpmux->cmx_scr |= 0x00001200;
pinfo->brg = 3;
+
+ cpm2_unmap(cpmux);
+ cpm2_unmap(io);
}
void scc4_lineif(struct uart_cpm_port *pinfo)
{
- volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+ volatile iop_cpm2_t *io = cpm2_map(im_ioport);
+ volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
io->iop_ppard |= 0x00000600;
io->iop_psord &= ~0x00000600; /* Tx/Rx */
io->iop_pdird &= ~0x00000200; /* Rx */
io->iop_pdird |= 0x00000400; /* Tx */
- cpm2_immr->im_cpmux.cmx_scr &= 0xffffff00;
- cpm2_immr->im_cpmux.cmx_scr |= 0x0000001b;
+ cpmux->cmx_scr &= 0xffffff00;
+ cpmux->cmx_scr |= 0x0000001b;
pinfo->brg = 4;
+
+ cpm2_unmap(cpmux);
+ cpm2_unmap(io);
}
+#endif
/*
* Allocate DP-Ram and memory buffers. We need to allocate a transmit and
int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
{
int dpmemsz, memsz;
- u8 *dp_mem;
- uint dp_offset;
+ u8 __iomem *dp_mem;
+ unsigned long dp_offset;
u8 *mem_addr;
dma_addr_t dma_addr = 0;
dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos);
dp_offset = cpm_dpalloc(dpmemsz, 8);
- if (IS_DPERR(dp_offset)) {
+ if (IS_ERR_VALUE(dp_offset)) {
printk(KERN_ERR
"cpm_uart_cpm.c: could not allocate buffer descriptors\n");
return -ENOMEM;
pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
* pinfo->rx_fifosize);
- pinfo->rx_bd_base = (volatile cbd_t *)dp_mem;
+ pinfo->rx_bd_base = (cbd_t __iomem *)dp_mem;
pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos;
return 0;
dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
pinfo->rx_fifosize) +
L1_CACHE_ALIGN(pinfo->tx_nrfifos *
- pinfo->tx_fifosize), pinfo->mem_addr,
+ pinfo->tx_fifosize), (void __force *)pinfo->mem_addr,
pinfo->dma_addr);
cpm_dpfree(pinfo->dp_addr);
}
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
/* Setup any dynamic params in the uart desc */
int cpm_uart_init_portdesc(void)
{
+#if defined(CONFIG_SERIAL_CPM_SMC1) || defined(CONFIG_SERIAL_CPM_SMC2)
+ u16 *addr;
+#endif
pr_debug("CPM uart[-]:init portdesc\n");
cpm_uart_nr = 0;
#ifdef CONFIG_SERIAL_CPM_SMC1
- cpm_uart_ports[UART_SMC1].smcp = (smc_t *) & cpm2_immr->im_smc[0];
- cpm_uart_ports[UART_SMC1].smcup =
- (smc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SMC1];
- *(u16 *)(&cpm2_immr->im_dprambase[PROFF_SMC1_BASE]) = PROFF_SMC1;
+ cpm_uart_ports[UART_SMC1].smcp = (smc_t *) cpm2_map(im_smc[0]);
cpm_uart_ports[UART_SMC1].port.mapbase =
- (unsigned long)&cpm2_immr->im_smc[0];
+ (unsigned long)cpm_uart_ports[UART_SMC1].smcp;
+
+ cpm_uart_ports[UART_SMC1].smcup =
+ (smc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SMC1], PROFF_SMC_SIZE);
+ addr = (u16 *)cpm2_map_size(im_dprambase[PROFF_SMC1_BASE], 2);
+ *addr = PROFF_SMC1;
+ cpm2_unmap(addr);
+
cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
- cpm_uart_ports[UART_SMC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_ports[UART_SMC1].port.uartclk = uart_clock();
cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
#endif
#ifdef CONFIG_SERIAL_CPM_SMC2
- cpm_uart_ports[UART_SMC2].smcp = (smc_t *) & cpm2_immr->im_smc[1];
- cpm_uart_ports[UART_SMC2].smcup =
- (smc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SMC2];
- *(u16 *)(&cpm2_immr->im_dprambase[PROFF_SMC2_BASE]) = PROFF_SMC2;
+ cpm_uart_ports[UART_SMC2].smcp = (smc_t *) cpm2_map(im_smc[1]);
cpm_uart_ports[UART_SMC2].port.mapbase =
- (unsigned long)&cpm2_immr->im_smc[1];
+ (unsigned long)cpm_uart_ports[UART_SMC2].smcp;
+
+ cpm_uart_ports[UART_SMC2].smcup =
+ (smc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SMC2], PROFF_SMC_SIZE);
+ addr = (u16 *)cpm2_map_size(im_dprambase[PROFF_SMC2_BASE], 2);
+ *addr = PROFF_SMC2;
+ cpm2_unmap(addr);
+
cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
- cpm_uart_ports[UART_SMC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_ports[UART_SMC2].port.uartclk = uart_clock();
cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
#endif
#ifdef CONFIG_SERIAL_CPM_SCC1
- cpm_uart_ports[UART_SCC1].sccp = (scc_t *) & cpm2_immr->im_scc[0];
- cpm_uart_ports[UART_SCC1].sccup =
- (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC1];
+ cpm_uart_ports[UART_SCC1].sccp = (scc_t *) cpm2_map(im_scc[0]);
cpm_uart_ports[UART_SCC1].port.mapbase =
- (unsigned long)&cpm2_immr->im_scc[0];
+ (unsigned long)cpm_uart_ports[UART_SCC1].sccp;
+ cpm_uart_ports[UART_SCC1].sccup =
+ (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC1], PROFF_SCC_SIZE);
+
cpm_uart_ports[UART_SCC1].sccp->scc_sccm &=
~(UART_SCCM_TX | UART_SCCM_RX);
cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &=
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
- cpm_uart_ports[UART_SCC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_ports[UART_SCC1].port.uartclk = uart_clock();
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
#endif
#ifdef CONFIG_SERIAL_CPM_SCC2
- cpm_uart_ports[UART_SCC2].sccp = (scc_t *) & cpm2_immr->im_scc[1];
- cpm_uart_ports[UART_SCC2].sccup =
- (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC2];
+ cpm_uart_ports[UART_SCC2].sccp = (scc_t *) cpm2_map(im_scc[1]);
cpm_uart_ports[UART_SCC2].port.mapbase =
- (unsigned long)&cpm2_immr->im_scc[1];
+ (unsigned long)cpm_uart_ports[UART_SCC2].sccp;
+ cpm_uart_ports[UART_SCC2].sccup =
+ (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC2], PROFF_SCC_SIZE);
+
cpm_uart_ports[UART_SCC2].sccp->scc_sccm &=
~(UART_SCCM_TX | UART_SCCM_RX);
cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &=
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
- cpm_uart_ports[UART_SCC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_ports[UART_SCC2].port.uartclk = uart_clock();
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
#endif
#ifdef CONFIG_SERIAL_CPM_SCC3
- cpm_uart_ports[UART_SCC3].sccp = (scc_t *) & cpm2_immr->im_scc[2];
- cpm_uart_ports[UART_SCC3].sccup =
- (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC3];
+ cpm_uart_ports[UART_SCC3].sccp = (scc_t *) cpm2_map(im_scc[2]);
cpm_uart_ports[UART_SCC3].port.mapbase =
- (unsigned long)&cpm2_immr->im_scc[2];
+ (unsigned long)cpm_uart_ports[UART_SCC3].sccp;
+ cpm_uart_ports[UART_SCC3].sccup =
+ (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC3], PROFF_SCC_SIZE);
+
cpm_uart_ports[UART_SCC3].sccp->scc_sccm &=
~(UART_SCCM_TX | UART_SCCM_RX);
cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &=
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
- cpm_uart_ports[UART_SCC3].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_ports[UART_SCC3].port.uartclk = uart_clock();
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
#endif
#ifdef CONFIG_SERIAL_CPM_SCC4
- cpm_uart_ports[UART_SCC4].sccp = (scc_t *) & cpm2_immr->im_scc[3];
- cpm_uart_ports[UART_SCC4].sccup =
- (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC4];
+ cpm_uart_ports[UART_SCC4].sccp = (scc_t *) cpm2_map(im_scc[3]);
cpm_uart_ports[UART_SCC4].port.mapbase =
- (unsigned long)&cpm2_immr->im_scc[3];
+ (unsigned long)cpm_uart_ports[UART_SCC4].sccp;
+ cpm_uart_ports[UART_SCC4].sccup =
+ (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC4], PROFF_SCC_SIZE);
+
cpm_uart_ports[UART_SCC4].sccp->scc_sccm &=
~(UART_SCCM_TX | UART_SCCM_RX);
cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &=
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
- cpm_uart_ports[UART_SCC4].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_ports[UART_SCC4].port.uartclk = uart_clock();
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
#endif
return 0;
}
+#endif
projects / firefly-linux-kernel-4.4.55.git / blobdiff