system, say Y to this option. The driver can handle 1, 2, or 3 port
cards. If unsure, say N.
-config SERIAL_8250_AU1X00
- bool "Au1x00 serial port support"
- depends on SERIAL_8250 != n && SOC_AU1X00
- help
- If you have an Au1x00 SOC based board and want to use the serial port,
- say Y to this option. The driver can handle up to 4 serial ports,
- depending on the SOC. If unsure, say N.
-
config SERIAL_8250_RM9K
bool "Support for MIPS RM9xxx integrated serial port"
depends on SERIAL_8250 != n && SERIAL_RM9000
config SERIAL_SAMSUNG
tristate "Samsung SoC serial support"
- depends on ARM && PLAT_S3C
+ depends on ARM && PLAT_SAMSUNG
select SERIAL_CORE
help
Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
provide all of these ports, depending on how the serial port
pins are configured.
+config SERIAL_SAMSUNG_UARTS_4
+ bool
+ depends on ARM && PLAT_SAMSUNG
+ default y if CPU_S3C2443
+ help
+ Internal node for the common case of 4 Samsung compatible UARTs
+
config SERIAL_SAMSUNG_UARTS
int
- depends on ARM && PLAT_S3C
+ depends on ARM && PLAT_SAMSUNG
default 2 if ARCH_S3C2400
- default 4 if ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443
+ default 4 if SERIAL_SAMSUNG_UARTS_4
default 3
help
Select the number of available UART ports for the Samsung S3C
Serial port support for the Samsung S3C2412 and S3C2413 SoC
config SERIAL_S3C2440
- tristate "Samsung S3C2440/S3C2442 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442)
+ tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support"
+ depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416)
default y if CPU_S3C2440
default y if CPU_S3C2442
+ select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416
help
- Serial port support for the Samsung S3C2440 and S3C2442 SoC
+ Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC
config SERIAL_S3C24A0
tristate "Samsung S3C24A0 Serial port support"
Serial port support for the Samsung S3C24A0 SoC
config SERIAL_S3C6400
- tristate "Samsung S3C6400/S3C6410 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410)
+ tristate "Samsung S3C6400/S3C6410/S5P6440/S5PC100 Serial port support"
+ depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5PC100)
+ select SERIAL_SAMSUNG_UARTS_4
default y
help
- Serial port support for the Samsung S3C6400 and S3C6410
- SoCs
+ Serial port support for the Samsung S3C6400, S3C6410, S5P6440
+ and S5PC100 SoCs
-config SERIAL_S5PC100
- tristate "Samsung S5PC100 Serial port support"
- depends on SERIAL_SAMSUNG && CPU_S5PC100
+config SERIAL_S5PV210
+ tristate "Samsung S5PV210 Serial port support"
+ depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442 || CPU_S5PV310)
+ select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_S5PV310)
default y
help
- Serial port support for the Samsung S5PC100 SoCs
+ Serial port support for Samsung's S5P Family of SoC's
+
+config SERIAL_TEGRA
+ boolean "High speed serial support for NVIDIA Tegra SoCs"
+ depends on ARCH_TEGRA && TEGRA_SYSTEM_DMA
+ select SERIAL_CORE
+ help
+ Support for the on-chip UARTs on NVIDIA Tegra SoC, providing
+ /dev/ttyHSx, where x is determined by the number of UARTs on the
+ platform
config SERIAL_MAX3100
tristate "MAX3100 support"
help
MAX3100 chip support
+config SERIAL_MAX3107
+ tristate "MAX3107 support"
+ depends on SPI
+ select SERIAL_CORE
+ help
+ MAX3107 chip support
+
+config SERIAL_MAX3107_AAVA
+ tristate "MAX3107 AAVA platform support"
+ depends on X86_MRST && SERIAL_MAX3107 && GPIOLIB
+ select SERIAL_CORE
+ help
+ Support for the MAX3107 chip configuration found on the AAVA
+ platform. Includes the extra initialisation and GPIO support
+ neded for this device.
+
config SERIAL_DZ
bool "DECstation DZ serial driver"
depends on MACH_DECSTATION && 32BIT
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
+config SERIAL_MRST_MAX3110
+ tristate "SPI UART driver for Max3110"
+ depends on SPI_DW_PCI
+ select SERIAL_CORE
+ select SERIAL_CORE_CONSOLE
+ help
+ This is the UART protocol driver for the MAX3110 device on
+ the Intel Moorestown platform. On other systems use the max3100
+ driver.
+
+config MRST_MAX3110_IRQ
+ boolean "Enable GPIO IRQ for Max3110 over Moorestown"
+ default n
+ depends on SERIAL_MRST_MAX3110 && GPIO_LANGWELL
+ help
+ This has to be enabled after Moorestown GPIO driver is loaded
+
+config SERIAL_MFD_HSU
+ tristate "Medfield High Speed UART support"
+ depends on PCI
+ select SERIAL_CORE
+
+config SERIAL_MFD_HSU_CONSOLE
+ boolean "Medfile HSU serial console support"
+ depends on SERIAL_MFD_HSU=y
+ select SERIAL_CORE_CONSOLE
+
config SERIAL_BFIN
tristate "Blackfin serial port support"
depends on BLACKFIN
config SERIAL_SH_SCI
tristate "SuperH SCI(F) serial port support"
- depends on SUPERH || H8300
+ depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE)
select SERIAL_CORE
config SERIAL_SH_SCI_NR_UARTS
depends on SERIAL_SH_SCI=y
select SERIAL_CORE_CONSOLE
+config SERIAL_SH_SCI_DMA
+ bool "DMA support"
+ depends on SERIAL_SH_SCI && SH_DMAE && EXPERIMENTAL
+
config SERIAL_PNX8XXX
bool "Enable PNX8XXX SoCs' UART Support"
depends on MIPS && (SOC_PNX8550 || SOC_PNX833X)
default y
config SERIAL_PMACZILOG
- tristate "PowerMac z85c30 ESCC support"
- depends on PPC_OF && PPC_PMAC
+ tristate "Mac or PowerMac z85c30 ESCC support"
+ depends on (M68K && MAC) || (PPC_OF && PPC_PMAC)
select SERIAL_CORE
help
This driver supports the Zilog z85C30 serial ports found on
- PowerMac machines.
+ (Power)Mac machines.
Say Y or M if you want to be able to these serial ports.
config SERIAL_PMACZILOG_TTYS
unable to use the 8250 module for PCMCIA or other 16C550-style
UARTs.
- Say N unless you need the z85c30 ports on your powermac
+ Say N unless you need the z85c30 ports on your (Power)Mac
to appear as /dev/ttySn.
config SERIAL_PMACZILOG_CONSOLE
- bool "Console on PowerMac z85c30 serial port"
+ bool "Console on Mac or PowerMac z85c30 serial port"
depends on SERIAL_PMACZILOG=y
select SERIAL_CORE_CONSOLE
help
If you would like to be able to use the z85c30 serial port
- on your PowerMac as the console, you can do so by answering
+ on your (Power)Mac as the console, you can do so by answering
Y to this option.
config SERIAL_LH7A40X
Support for Console on SC2681/SC2692 serial ports.
config SERIAL_BFIN_SPORT
- tristate "Blackfin SPORT emulate UART (EXPERIMENTAL)"
- depends on BLACKFIN && EXPERIMENTAL
+ tristate "Blackfin SPORT emulate UART"
+ depends on BLACKFIN
select SERIAL_CORE
help
Enable SPORT emulate UART on Blackfin series.
To compile this driver as a module, choose M here: the
module will be called bfin_sport_uart.
-choice
- prompt "Baud rate for Blackfin SPORT UART"
- depends on SERIAL_BFIN_SPORT
- default SERIAL_SPORT_BAUD_RATE_57600
+config SERIAL_BFIN_SPORT_CONSOLE
+ bool "Console on Blackfin sport emulated uart"
+ depends on SERIAL_BFIN_SPORT=y
+ select SERIAL_CORE_CONSOLE
+
+config SERIAL_BFIN_SPORT0_UART
+ bool "Enable UART over SPORT0"
+ depends on SERIAL_BFIN_SPORT && !(BF542 || BF544)
help
- Choose a baud rate for the SPORT UART, other uart settings are
- 8 bit, 1 stop bit, no parity, no flow control.
+ Enable UART over SPORT0
-config SERIAL_SPORT_BAUD_RATE_115200
- bool "115200"
+config SERIAL_BFIN_SPORT0_UART_CTSRTS
+ bool "Enable UART over SPORT0 hardware flow control"
+ depends on SERIAL_BFIN_SPORT0_UART
+ help
+ Enable hardware flow control in the driver.
-config SERIAL_SPORT_BAUD_RATE_57600
- bool "57600"
+config SERIAL_BFIN_SPORT1_UART
+ bool "Enable UART over SPORT1"
+ depends on SERIAL_BFIN_SPORT
+ help
+ Enable UART over SPORT1
-config SERIAL_SPORT_BAUD_RATE_38400
- bool "38400"
+config SERIAL_BFIN_SPORT1_UART_CTSRTS
+ bool "Enable UART over SPORT1 hardware flow control"
+ depends on SERIAL_BFIN_SPORT1_UART
+ help
+ Enable hardware flow control in the driver.
-config SERIAL_SPORT_BAUD_RATE_19200
- bool "19200"
+config SERIAL_BFIN_SPORT2_UART
+ bool "Enable UART over SPORT2"
+ depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
+ help
+ Enable UART over SPORT2
-config SERIAL_SPORT_BAUD_RATE_9600
- bool "9600"
-endchoice
+config SERIAL_BFIN_SPORT2_UART_CTSRTS
+ bool "Enable UART over SPORT2 hardware flow control"
+ depends on SERIAL_BFIN_SPORT2_UART
+ help
+ Enable hardware flow control in the driver.
-config SPORT_BAUD_RATE
- int
- depends on SERIAL_BFIN_SPORT
- default 115200 if (SERIAL_SPORT_BAUD_RATE_115200)
- default 57600 if (SERIAL_SPORT_BAUD_RATE_57600)
- default 38400 if (SERIAL_SPORT_BAUD_RATE_38400)
- default 19200 if (SERIAL_SPORT_BAUD_RATE_19200)
- default 9600 if (SERIAL_SPORT_BAUD_RATE_9600)
+config SERIAL_BFIN_SPORT3_UART
+ bool "Enable UART over SPORT3"
+ depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
+ help
+ Enable UART over SPORT3
+
+config SERIAL_BFIN_SPORT3_UART_CTSRTS
+ bool "Enable UART over SPORT3 hardware flow control"
+ depends on SERIAL_BFIN_SPORT3_UART
+ help
+ Enable hardware flow control in the driver.
config SERIAL_TIMBERDALE
tristate "Support for timberdale UART"
- depends on MFD_TIMBERDALE
select SERIAL_CORE
---help---
Add support for UART controller on timberdale.
help
SC8800 spi-serial support
+config SERIAL_GRLIB_GAISLER_APBUART
+ tristate "GRLIB APBUART serial support"
+ depends on OF
+ ---help---
+ Add support for the GRLIB APBUART serial port.
+
+config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE
+ bool "Console on GRLIB APBUART serial port"
+ depends on SERIAL_GRLIB_GAISLER_APBUART=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Support for running a console on the GRLIB APBUART
+
+config SERIAL_ALTERA_JTAGUART
+ tristate "Altera JTAG UART support"
+ select SERIAL_CORE
+ help
+ This driver supports the Altera JTAG UART port.
+
+config SERIAL_ALTERA_JTAGUART_CONSOLE
+ bool "Altera JTAG UART console support"
+ depends on SERIAL_ALTERA_JTAGUART=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Enable a Altera JTAG UART port to be the system console.
+
+config SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS
+ bool "Bypass output when no connection"
+ depends on SERIAL_ALTERA_JTAGUART_CONSOLE
+ select SERIAL_CORE_CONSOLE
+ help
+ Bypass console output and keep going even if there is no
+ JTAG terminal connection with the host.
+
+config SERIAL_ALTERA_UART
+ tristate "Altera UART support"
+ select SERIAL_CORE
+ help
+ This driver supports the Altera softcore UART port.
+
+config SERIAL_ALTERA_UART_MAXPORTS
+ int "Maximum number of Altera UART ports"
+ depends on SERIAL_ALTERA_UART
+ default 4
+ help
+ This setting lets you define the maximum number of the Altera
+ UART ports. The usual default varies from board to board, and
+ this setting is a way of catering for that.
+
+config SERIAL_ALTERA_UART_BAUDRATE
+ int "Default baudrate for Altera UART ports"
+ depends on SERIAL_ALTERA_UART
+ default 115200
+ help
+ This setting lets you define what the default baudrate is for the
+ Altera UART ports. The usual default varies from board to board,
+ and this setting is a way of catering for that.
+
+config SERIAL_ALTERA_UART_CONSOLE
+ bool "Altera UART console support"
+ depends on SERIAL_ALTERA_UART=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Enable a Altera UART port to be the system console.
+
endmenu
projects / firefly-linux-kernel-4.4.55.git / blobdiff