{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324a},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324b},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3233},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3250},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3251},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3252},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3253},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3254},
#define PCI_DEVICE_ID_HP_CISSF 0x333f
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x333F},
{PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
+ {PCI_VENDOR_ID_COMPAQ, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
{0,}
};
{0x324b103C, "Smart Array P711m", &SA5_access},
{0x3233103C, "StorageWorks P1210m", &SA5_access},
{0x333F103C, "StorageWorks P1210m", &SA5_access},
+ {0x3250103C, "Smart Array", &SA5_access},
+ {0x3250113C, "Smart Array", &SA5_access},
+ {0x3250123C, "Smart Array", &SA5_access},
+ {0x3250133C, "Smart Array", &SA5_access},
+ {0x3250143C, "Smart Array", &SA5_access},
{0xFFFF103C, "Unknown Smart Array", &SA5_access},
};
static int number_of_controllers;
-static irqreturn_t do_hpsa_intr(int irq, void *dev_id);
+static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id);
+static irqreturn_t do_hpsa_intr_msi(int irq, void *dev_id);
static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg);
static void start_io(struct ctlr_info *h);
struct device_attribute *attr, char *buf);
static ssize_t unique_id_show(struct device *dev,
struct device_attribute *attr, char *buf);
+static ssize_t host_show_firmware_revision(struct device *dev,
+ struct device_attribute *attr, char *buf);
static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno);
static ssize_t host_store_rescan(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count);
/* performant mode helper functions */
static void calc_bucket_map(int *bucket, int num_buckets,
int nsgs, int *bucket_map);
-static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h);
+static __devinit void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h);
static inline u32 next_command(struct ctlr_info *h);
+static int __devinit hpsa_find_cfg_addrs(struct pci_dev *pdev,
+ void __iomem *vaddr, u32 *cfg_base_addr, u64 *cfg_base_addr_index,
+ u64 *cfg_offset);
+static int __devinit hpsa_pci_find_memory_BAR(struct pci_dev *pdev,
+ unsigned long *memory_bar);
+static int __devinit hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id);
static DEVICE_ATTR(raid_level, S_IRUGO, raid_level_show, NULL);
static DEVICE_ATTR(lunid, S_IRUGO, lunid_show, NULL);
static DEVICE_ATTR(unique_id, S_IRUGO, unique_id_show, NULL);
static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan);
+static DEVICE_ATTR(firmware_revision, S_IRUGO,
+ host_show_firmware_revision, NULL);
static struct device_attribute *hpsa_sdev_attrs[] = {
&dev_attr_raid_level,
static struct device_attribute *hpsa_shost_attrs[] = {
&dev_attr_rescan,
+ &dev_attr_firmware_revision,
NULL,
};
return count;
}
+static ssize_t host_show_firmware_revision(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ctlr_info *h;
+ struct Scsi_Host *shost = class_to_shost(dev);
+ unsigned char *fwrev;
+
+ h = shost_to_hba(shost);
+ if (!h->hba_inquiry_data)
+ return 0;
+ fwrev = &h->hba_inquiry_data[32];
+ return snprintf(buf, 20, "%c%c%c%c\n",
+ fwrev[0], fwrev[1], fwrev[2], fwrev[3]);
+}
+
/* Enqueuing and dequeuing functions for cmdlists. */
static inline void addQ(struct hlist_head *list, struct CommandList *c)
{
goto bail_out;
}
- /* As a side effect, record the firmware version number
- * if we happen to be talking to the RAID controller.
- */
- if (is_hba_lunid(scsi3addr))
- memcpy(h->firm_ver, &inq_buff[32], 4);
-
this_device->devtype = (inq_buff[0] & 0x1f);
memcpy(this_device->scsi3addr, scsi3addr, 8);
memcpy(this_device->vendor, &inq_buff[8],
static inline long interrupt_not_for_us(struct ctlr_info *h)
{
- return !(h->msi_vector || h->msix_vector) &&
- ((h->access.intr_pending(h) == 0) ||
- (h->interrupts_enabled == 0));
+ return (h->access.intr_pending(h) == 0) ||
+ (h->interrupts_enabled == 0);
}
static inline int bad_tag(struct ctlr_info *h, u32 tag_index,
return next_command(h);
}
-static irqreturn_t do_hpsa_intr(int irq, void *dev_id)
+static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id)
{
struct ctlr_info *h = dev_id;
unsigned long flags;
if (interrupt_not_for_us(h))
return IRQ_NONE;
+ spin_lock_irqsave(&h->lock, flags);
+ while (interrupt_pending(h)) {
+ raw_tag = get_next_completion(h);
+ while (raw_tag != FIFO_EMPTY) {
+ if (hpsa_tag_contains_index(raw_tag))
+ raw_tag = process_indexed_cmd(h, raw_tag);
+ else
+ raw_tag = process_nonindexed_cmd(h, raw_tag);
+ }
+ }
+ spin_unlock_irqrestore(&h->lock, flags);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t do_hpsa_intr_msi(int irq, void *dev_id)
+{
+ struct ctlr_info *h = dev_id;
+ unsigned long flags;
+ u32 raw_tag;
+
spin_lock_irqsave(&h->lock, flags);
raw_tag = get_next_completion(h);
while (raw_tag != FIFO_EMPTY) {
return 0;
}
-/* This does a hard reset of the controller using PCI power management
- * states.
- */
-static __devinit int hpsa_hard_reset_controller(struct pci_dev *pdev)
+static int hpsa_controller_hard_reset(struct pci_dev *pdev,
+ void * __iomem vaddr, bool use_doorbell)
{
- u16 pmcsr, saved_config_space[32];
- int i, pos;
+ u16 pmcsr;
+ int pos;
+
+ if (use_doorbell) {
+ /* For everything after the P600, the PCI power state method
+ * of resetting the controller doesn't work, so we have this
+ * other way using the doorbell register.
+ */
+ dev_info(&pdev->dev, "using doorbell to reset controller\n");
+ writel(DOORBELL_CTLR_RESET, vaddr + SA5_DOORBELL);
+ msleep(1000);
+ } else { /* Try to do it the PCI power state way */
+
+ /* Quoting from the Open CISS Specification: "The Power
+ * Management Control/Status Register (CSR) controls the power
+ * state of the device. The normal operating state is D0,
+ * CSR=00h. The software off state is D3, CSR=03h. To reset
+ * the controller, place the interface device in D3 then to D0,
+ * this causes a secondary PCI reset which will reset the
+ * controller." */
+
+ pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ if (pos == 0) {
+ dev_err(&pdev->dev,
+ "hpsa_reset_controller: "
+ "PCI PM not supported\n");
+ return -ENODEV;
+ }
+ dev_info(&pdev->dev, "using PCI PM to reset controller\n");
+ /* enter the D3hot power management state */
+ pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
+ pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+ pmcsr |= PCI_D3hot;
+ pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
- dev_info(&pdev->dev, "using PCI PM to reset controller\n");
+ msleep(500);
- /* This is very nearly the same thing as
+ /* enter the D0 power management state */
+ pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+ pmcsr |= PCI_D0;
+ pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+
+ msleep(500);
+ }
+ return 0;
+}
+
+/* This does a hard reset of the controller using PCI power management
+ * states or the using the doorbell register.
+ */
+static __devinit int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
+{
+ u16 saved_config_space[32];
+ u64 cfg_offset;
+ u32 cfg_base_addr;
+ u64 cfg_base_addr_index;
+ void __iomem *vaddr;
+ unsigned long paddr;
+ u32 misc_fw_support, active_transport;
+ int rc, i;
+ struct CfgTable __iomem *cfgtable;
+ bool use_doorbell;
+ u32 board_id;
+
+ /* For controllers as old as the P600, this is very nearly
+ * the same thing as
*
* pci_save_state(pci_dev);
* pci_set_power_state(pci_dev, PCI_D3hot);
* violate the ordering requirements for restoring the
* configuration space from the CCISS document (see the
* comment below). So we roll our own ....
+ *
+ * For controllers newer than the P600, the pci power state
+ * method of resetting doesn't work so we have another way
+ * using the doorbell register.
*/
+ /* Exclude 640x boards. These are two pci devices in one slot
+ * which share a battery backed cache module. One controls the
+ * cache, the other accesses the cache through the one that controls
+ * it. If we reset the one controlling the cache, the other will
+ * likely not be happy. Just forbid resetting this conjoined mess.
+ * The 640x isn't really supported by hpsa anyway.
+ */
+ hpsa_lookup_board_id(pdev, &board_id);
+ if (board_id == 0x409C0E11 || board_id == 0x409D0E11)
+ return -ENOTSUPP;
+
for (i = 0; i < 32; i++)
pci_read_config_word(pdev, 2*i, &saved_config_space[i]);
- pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
- if (pos == 0) {
- dev_err(&pdev->dev,
- "hpsa_reset_controller: PCI PM not supported\n");
- return -ENODEV;
- }
- /* Quoting from the Open CISS Specification: "The Power
- * Management Control/Status Register (CSR) controls the power
- * state of the device. The normal operating state is D0,
- * CSR=00h. The software off state is D3, CSR=03h. To reset
- * the controller, place the interface device in D3 then to
- * D0, this causes a secondary PCI reset which will reset the
- * controller."
- */
-
- /* enter the D3hot power management state */
- pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
- pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
- pmcsr |= PCI_D3hot;
- pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+ /* find the first memory BAR, so we can find the cfg table */
+ rc = hpsa_pci_find_memory_BAR(pdev, &paddr);
+ if (rc)
+ return rc;
+ vaddr = remap_pci_mem(paddr, 0x250);
+ if (!vaddr)
+ return -ENOMEM;
- msleep(500);
+ /* find cfgtable in order to check if reset via doorbell is supported */
+ rc = hpsa_find_cfg_addrs(pdev, vaddr, &cfg_base_addr,
+ &cfg_base_addr_index, &cfg_offset);
+ if (rc)
+ goto unmap_vaddr;
+ cfgtable = remap_pci_mem(pci_resource_start(pdev,
+ cfg_base_addr_index) + cfg_offset, sizeof(*cfgtable));
+ if (!cfgtable) {
+ rc = -ENOMEM;
+ goto unmap_vaddr;
+ }
- /* enter the D0 power management state */
- pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
- pmcsr |= PCI_D0;
- pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+ /* If reset via doorbell register is supported, use that. */
+ misc_fw_support = readl(&cfgtable->misc_fw_support);
+ use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET;
- msleep(500);
+ rc = hpsa_controller_hard_reset(pdev, vaddr, use_doorbell);
+ if (rc)
+ goto unmap_cfgtable;
/* Restore the PCI configuration space. The Open CISS
* Specification says, "Restore the PCI Configuration
wmb();
pci_write_config_word(pdev, 4, saved_config_space[2]);
- return 0;
+ /* Some devices (notably the HP Smart Array 5i Controller)
+ need a little pause here */
+ msleep(HPSA_POST_RESET_PAUSE_MSECS);
+
+ /* Controller should be in simple mode at this point. If it's not,
+ * It means we're on one of those controllers which doesn't support
+ * the doorbell reset method and on which the PCI power management reset
+ * method doesn't work (P800, for example.)
+ * In those cases, pretend the reset worked and hope for the best.
+ */
+ active_transport = readl(&cfgtable->TransportActive);
+ if (active_transport & PERFORMANT_MODE) {
+ dev_warn(&pdev->dev, "Unable to successfully reset controller,"
+ " proceeding anyway.\n");
+ rc = -ENOTSUPP;
+ }
+
+unmap_cfgtable:
+ iounmap(cfgtable);
+
+unmap_vaddr:
+ iounmap(vaddr);
+ return rc;
}
/*
* the io functions.
* This is for debug only.
*/
-#ifdef HPSA_DEBUG
static void print_cfg_table(struct device *dev, struct CfgTable *tb)
{
+#ifdef HPSA_DEBUG
int i;
char temp_name[17];
dev_info(dev, " Server Name = %s\n", temp_name);
dev_info(dev, " Heartbeat Counter = 0x%x\n\n\n",
readl(&(tb->HeartBeat)));
-}
#endif /* HPSA_DEBUG */
+}
static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr)
{
if (*board_id == products[i].board_id)
return i;
- if (subsystem_vendor_id != PCI_VENDOR_ID_HP || !hpsa_allow_any) {
+ if ((subsystem_vendor_id != PCI_VENDOR_ID_HP &&
+ subsystem_vendor_id != PCI_VENDOR_ID_COMPAQ) ||
+ !hpsa_allow_any) {
dev_warn(&pdev->dev, "unrecognized board ID: "
"0x%08x, ignoring.\n", *board_id);
return -ENODEV;
return ((command & PCI_COMMAND_MEMORY) == 0);
}
-static int __devinit hpsa_pci_find_memory_BAR(struct ctlr_info *h,
+static int __devinit hpsa_pci_find_memory_BAR(struct pci_dev *pdev,
unsigned long *memory_bar)
{
int i;
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
- if (pci_resource_flags(h->pdev, i) & IORESOURCE_MEM) {
+ if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) {
/* addressing mode bits already removed */
- *memory_bar = pci_resource_start(h->pdev, i);
- dev_dbg(&h->pdev->dev, "memory BAR = %lx\n",
+ *memory_bar = pci_resource_start(pdev, i);
+ dev_dbg(&pdev->dev, "memory BAR = %lx\n",
*memory_bar);
return 0;
}
- dev_warn(&h->pdev->dev, "no memory BAR found\n");
+ dev_warn(&pdev->dev, "no memory BAR found\n");
return -ENODEV;
}
-static int __devinit hpsa_pci_init(struct ctlr_info *h)
+static int __devinit hpsa_wait_for_board_ready(struct ctlr_info *h)
{
- u32 scratchpad = 0;
- u64 cfg_offset;
- u32 cfg_base_addr;
- u64 cfg_base_addr_index;
- u32 trans_offset;
- int i, prod_index, err;
-
- prod_index = hpsa_lookup_board_id(h->pdev, &h->board_id);
- if (prod_index < 0)
- return -ENODEV;
- h->product_name = products[prod_index].product_name;
- h->access = *(products[prod_index].access);
-
- if (hpsa_board_disabled(h->pdev)) {
- dev_warn(&h->pdev->dev, "controller appears to be disabled\n");
- return -ENODEV;
- }
- err = pci_enable_device(h->pdev);
- if (err) {
- dev_warn(&h->pdev->dev, "unable to enable PCI device\n");
- return err;
- }
-
- err = pci_request_regions(h->pdev, "hpsa");
- if (err) {
- dev_err(&h->pdev->dev,
- "cannot obtain PCI resources, aborting\n");
- return err;
- }
- hpsa_interrupt_mode(h);
- err = hpsa_pci_find_memory_BAR(h, &h->paddr);
- if (err)
- goto err_out_free_res;
- h->vaddr = remap_pci_mem(h->paddr, 0x250);
+ int i;
+ u32 scratchpad;
- /* Wait for the board to become ready. */
for (i = 0; i < HPSA_BOARD_READY_ITERATIONS; i++) {
scratchpad = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
if (scratchpad == HPSA_FIRMWARE_READY)
- break;
+ return 0;
msleep(HPSA_BOARD_READY_POLL_INTERVAL_MSECS);
}
- if (scratchpad != HPSA_FIRMWARE_READY) {
- dev_warn(&h->pdev->dev, "board not ready, timed out.\n");
- err = -ENODEV;
- goto err_out_free_res;
- }
+ dev_warn(&h->pdev->dev, "board not ready, timed out.\n");
+ return -ENODEV;
+}
- /* get the address index number */
- cfg_base_addr = readl(h->vaddr + SA5_CTCFG_OFFSET);
- cfg_base_addr &= (u32) 0x0000ffff;
- cfg_base_addr_index = find_PCI_BAR_index(h->pdev, cfg_base_addr);
- if (cfg_base_addr_index == -1) {
- dev_warn(&h->pdev->dev, "cannot find cfg_base_addr_index\n");
- err = -ENODEV;
- goto err_out_free_res;
+static int __devinit hpsa_find_cfg_addrs(struct pci_dev *pdev,
+ void __iomem *vaddr, u32 *cfg_base_addr, u64 *cfg_base_addr_index,
+ u64 *cfg_offset)
+{
+ *cfg_base_addr = readl(vaddr + SA5_CTCFG_OFFSET);
+ *cfg_offset = readl(vaddr + SA5_CTMEM_OFFSET);
+ *cfg_base_addr &= (u32) 0x0000ffff;
+ *cfg_base_addr_index = find_PCI_BAR_index(pdev, *cfg_base_addr);
+ if (*cfg_base_addr_index == -1) {
+ dev_warn(&pdev->dev, "cannot find cfg_base_addr_index\n");
+ return -ENODEV;
}
+ return 0;
+}
- cfg_offset = readl(h->vaddr + SA5_CTMEM_OFFSET);
+static int __devinit hpsa_find_cfgtables(struct ctlr_info *h)
+{
+ u64 cfg_offset;
+ u32 cfg_base_addr;
+ u64 cfg_base_addr_index;
+ u32 trans_offset;
+ int rc;
+
+ rc = hpsa_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr,
+ &cfg_base_addr_index, &cfg_offset);
+ if (rc)
+ return rc;
h->cfgtable = remap_pci_mem(pci_resource_start(h->pdev,
- cfg_base_addr_index) + cfg_offset,
- sizeof(h->cfgtable));
+ cfg_base_addr_index) + cfg_offset, sizeof(*h->cfgtable));
+ if (!h->cfgtable)
+ return -ENOMEM;
/* Find performant mode table. */
- trans_offset = readl(&(h->cfgtable->TransMethodOffset));
+ trans_offset = readl(&h->cfgtable->TransMethodOffset);
h->transtable = remap_pci_mem(pci_resource_start(h->pdev,
cfg_base_addr_index)+cfg_offset+trans_offset,
sizeof(*h->transtable));
+ if (!h->transtable)
+ return -ENOMEM;
+ return 0;
+}
+static void __devinit hpsa_get_max_perf_mode_cmds(struct ctlr_info *h)
+{
h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
- h->maxsgentries = readl(&(h->cfgtable->MaxScatterGatherElements));
+ if (h->max_commands < 16) {
+ dev_warn(&h->pdev->dev, "Controller reports "
+ "max supported commands of %d, an obvious lie. "
+ "Using 16. Ensure that firmware is up to date.\n",
+ h->max_commands);
+ h->max_commands = 16;
+ }
+}
+/* Interrogate the hardware for some limits:
+ * max commands, max SG elements without chaining, and with chaining,
+ * SG chain block size, etc.
+ */
+static void __devinit hpsa_find_board_params(struct ctlr_info *h)
+{
+ hpsa_get_max_perf_mode_cmds(h);
+ h->nr_cmds = h->max_commands - 4; /* Allow room for some ioctls */
+ h->maxsgentries = readl(&(h->cfgtable->MaxScatterGatherElements));
/*
* Limit in-command s/g elements to 32 save dma'able memory.
* Howvever spec says if 0, use 31
*/
-
h->max_cmd_sg_entries = 31;
if (h->maxsgentries > 512) {
h->max_cmd_sg_entries = 32;
h->maxsgentries = 31; /* default to traditional values */
h->chainsize = 0;
}
+}
- /* Allow room for some ioctls */
- h->nr_cmds = h->max_commands - 4;
-
+static inline bool hpsa_CISS_signature_present(struct ctlr_info *h)
+{
if ((readb(&h->cfgtable->Signature[0]) != 'C') ||
(readb(&h->cfgtable->Signature[1]) != 'I') ||
(readb(&h->cfgtable->Signature[2]) != 'S') ||
(readb(&h->cfgtable->Signature[3]) != 'S')) {
dev_warn(&h->pdev->dev, "not a valid CISS config table\n");
- err = -ENODEV;
- goto err_out_free_res;
+ return false;
}
+ return true;
+}
+
+/* Need to enable prefetch in the SCSI core for 6400 in x86 */
+static inline void hpsa_enable_scsi_prefetch(struct ctlr_info *h)
+{
#ifdef CONFIG_X86
- {
- /* Need to enable prefetch in the SCSI core for 6400 in x86 */
- u32 prefetch;
- prefetch = readl(&(h->cfgtable->SCSI_Prefetch));
- prefetch |= 0x100;
- writel(prefetch, &(h->cfgtable->SCSI_Prefetch));
- }
+ u32 prefetch;
+
+ prefetch = readl(&(h->cfgtable->SCSI_Prefetch));
+ prefetch |= 0x100;
+ writel(prefetch, &(h->cfgtable->SCSI_Prefetch));
#endif
+}
- /* Disabling DMA prefetch for the P600
- * An ASIC bug may result in a prefetch beyond
- * physical memory.
- */
- if (h->board_id == 0x3225103C) {
- u32 dma_prefetch;
- dma_prefetch = readl(h->vaddr + I2O_DMA1_CFG);
- dma_prefetch |= 0x8000;
- writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG);
- }
+/* Disable DMA prefetch for the P600. Otherwise an ASIC bug may result
+ * in a prefetch beyond physical memory.
+ */
+static inline void hpsa_p600_dma_prefetch_quirk(struct ctlr_info *h)
+{
+ u32 dma_prefetch;
- h->max_commands = readl(&(h->cfgtable->CmdsOutMax));
- /* Update the field, and then ring the doorbell */
- writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest));
- writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
+ if (h->board_id != 0x3225103C)
+ return;
+ dma_prefetch = readl(h->vaddr + I2O_DMA1_CFG);
+ dma_prefetch |= 0x8000;
+ writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG);
+}
+
+static void __devinit hpsa_wait_for_mode_change_ack(struct ctlr_info *h)
+{
+ int i;
/* under certain very rare conditions, this can take awhile.
* (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
/* delay and try again */
msleep(10);
}
+}
-#ifdef HPSA_DEBUG
- print_cfg_table(&h->pdev->dev, h->cfgtable);
-#endif /* HPSA_DEBUG */
+static int __devinit hpsa_enter_simple_mode(struct ctlr_info *h)
+{
+ u32 trans_support;
+ trans_support = readl(&(h->cfgtable->TransportSupport));
+ if (!(trans_support & SIMPLE_MODE))
+ return -ENOTSUPP;
+
+ h->max_commands = readl(&(h->cfgtable->CmdsOutMax));
+ /* Update the field, and then ring the doorbell */
+ writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest));
+ writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
+ hpsa_wait_for_mode_change_ack(h);
+ print_cfg_table(&h->pdev->dev, h->cfgtable);
if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) {
dev_warn(&h->pdev->dev,
"unable to get board into simple mode\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static int __devinit hpsa_pci_init(struct ctlr_info *h)
+{
+ int prod_index, err;
+
+ prod_index = hpsa_lookup_board_id(h->pdev, &h->board_id);
+ if (prod_index < 0)
+ return -ENODEV;
+ h->product_name = products[prod_index].product_name;
+ h->access = *(products[prod_index].access);
+
+ if (hpsa_board_disabled(h->pdev)) {
+ dev_warn(&h->pdev->dev, "controller appears to be disabled\n");
+ return -ENODEV;
+ }
+ err = pci_enable_device(h->pdev);
+ if (err) {
+ dev_warn(&h->pdev->dev, "unable to enable PCI device\n");
+ return err;
+ }
+
+ err = pci_request_regions(h->pdev, "hpsa");
+ if (err) {
+ dev_err(&h->pdev->dev,
+ "cannot obtain PCI resources, aborting\n");
+ return err;
+ }
+ hpsa_interrupt_mode(h);
+ err = hpsa_pci_find_memory_BAR(h->pdev, &h->paddr);
+ if (err)
+ goto err_out_free_res;
+ h->vaddr = remap_pci_mem(h->paddr, 0x250);
+ if (!h->vaddr) {
+ err = -ENOMEM;
+ goto err_out_free_res;
+ }
+ err = hpsa_wait_for_board_ready(h);
+ if (err)
+ goto err_out_free_res;
+ err = hpsa_find_cfgtables(h);
+ if (err)
+ goto err_out_free_res;
+ hpsa_find_board_params(h);
+
+ if (!hpsa_CISS_signature_present(h)) {
err = -ENODEV;
goto err_out_free_res;
}
+ hpsa_enable_scsi_prefetch(h);
+ hpsa_p600_dma_prefetch_quirk(h);
+ err = hpsa_enter_simple_mode(h);
+ if (err)
+ goto err_out_free_res;
return 0;
err_out_free_res:
+ if (h->transtable)
+ iounmap(h->transtable);
+ if (h->cfgtable)
+ iounmap(h->cfgtable);
+ if (h->vaddr)
+ iounmap(h->vaddr);
/*
* Deliberately omit pci_disable_device(): it does something nasty to
* Smart Array controllers that pci_enable_device does not undo
}
}
+static __devinit int hpsa_init_reset_devices(struct pci_dev *pdev)
+{
+ int rc, i;
+
+ if (!reset_devices)
+ return 0;
+
+ /* Reset the controller with a PCI power-cycle or via doorbell */
+ rc = hpsa_kdump_hard_reset_controller(pdev);
+
+ /* -ENOTSUPP here means we cannot reset the controller
+ * but it's already (and still) up and running in
+ * "performant mode". Or, it might be 640x, which can't reset
+ * due to concerns about shared bbwc between 6402/6404 pair.
+ */
+ if (rc == -ENOTSUPP)
+ return 0; /* just try to do the kdump anyhow. */
+ if (rc)
+ return -ENODEV;
+ if (hpsa_reset_msi(pdev))
+ return -ENODEV;
+
+ /* Now try to get the controller to respond to a no-op */
+ for (i = 0; i < HPSA_POST_RESET_NOOP_RETRIES; i++) {
+ if (hpsa_noop(pdev) == 0)
+ break;
+ else
+ dev_warn(&pdev->dev, "no-op failed%s\n",
+ (i < 11 ? "; re-trying" : ""));
+ }
+ return 0;
+}
+
static int __devinit hpsa_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- int i, rc;
- int dac;
+ int dac, rc;
struct ctlr_info *h;
if (number_of_controllers == 0)
printk(KERN_INFO DRIVER_NAME "\n");
- if (reset_devices) {
- /* Reset the controller with a PCI power-cycle */
- if (hpsa_hard_reset_controller(pdev) || hpsa_reset_msi(pdev))
- return -ENODEV;
- /* Some devices (notably the HP Smart Array 5i Controller)
- need a little pause here */
- msleep(HPSA_POST_RESET_PAUSE_MSECS);
-
- /* Now try to get the controller to respond to a no-op */
- for (i = 0; i < HPSA_POST_RESET_NOOP_RETRIES; i++) {
- if (hpsa_noop(pdev) == 0)
- break;
- else
- dev_warn(&pdev->dev, "no-op failed%s\n",
- (i < 11 ? "; re-trying" : ""));
- }
- }
+ rc = hpsa_init_reset_devices(pdev);
+ if (rc)
+ return rc;
/* Command structures must be aligned on a 32-byte boundary because
* the 5 lower bits of the address are used by the hardware. and by
/* make sure the board interrupts are off */
h->access.set_intr_mask(h, HPSA_INTR_OFF);
- rc = request_irq(h->intr[PERF_MODE_INT], do_hpsa_intr,
- IRQF_DISABLED, h->devname, h);
+
+ if (h->msix_vector || h->msi_vector)
+ rc = request_irq(h->intr[PERF_MODE_INT], do_hpsa_intr_msi,
+ IRQF_DISABLED, h->devname, h);
+ else
+ rc = request_irq(h->intr[PERF_MODE_INT], do_hpsa_intr_intx,
+ IRQF_DISABLED, h->devname, h);
if (rc) {
dev_err(&pdev->dev, "unable to get irq %d for %s\n",
h->intr[PERF_MODE_INT], h->devname);
hpsa_unregister_scsi(h); /* unhook from SCSI subsystem */
hpsa_shutdown(pdev);
iounmap(h->vaddr);
+ iounmap(h->transtable);
+ iounmap(h->cfgtable);
hpsa_free_sg_chain_blocks(h);
pci_free_consistent(h->pdev,
h->nr_cmds * sizeof(struct CommandList),
}
}
-static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h)
+static __devinit void hpsa_enter_performant_mode(struct ctlr_info *h)
{
- u32 trans_support;
- u64 trans_offset;
+ int i;
+ unsigned long register_value;
+
+ /* This is a bit complicated. There are 8 registers on
+ * the controller which we write to to tell it 8 different
+ * sizes of commands which there may be. It's a way of
+ * reducing the DMA done to fetch each command. Encoded into
+ * each command's tag are 3 bits which communicate to the controller
+ * which of the eight sizes that command fits within. The size of
+ * each command depends on how many scatter gather entries there are.
+ * Each SG entry requires 16 bytes. The eight registers are programmed
+ * with the number of 16-byte blocks a command of that size requires.
+ * The smallest command possible requires 5 such 16 byte blocks.
+ * the largest command possible requires MAXSGENTRIES + 4 16-byte
+ * blocks. Note, this only extends to the SG entries contained
+ * within the command block, and does not extend to chained blocks
+ * of SG elements. bft[] contains the eight values we write to
+ * the registers. They are not evenly distributed, but have more
+ * sizes for small commands, and fewer sizes for larger commands.
+ */
+ int bft[8] = {5, 6, 8, 10, 12, 20, 28, MAXSGENTRIES + 4};
+ BUILD_BUG_ON(28 > MAXSGENTRIES + 4);
/* 5 = 1 s/g entry or 4k
* 6 = 2 s/g entry or 8k
* 8 = 4 s/g entry or 16k
* 10 = 6 s/g entry or 24k
*/
- int bft[8] = {5, 6, 8, 10, 12, 20, 28, 35}; /* for scatter/gathers */
- int i = 0;
- int l = 0;
- unsigned long register_value;
-
- trans_support = readl(&(h->cfgtable->TransportSupport));
- if (!(trans_support & PERFORMANT_MODE))
- return;
-
- h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
- h->max_sg_entries = 32;
- /* Performant mode ring buffer and supporting data structures */
- h->reply_pool_size = h->max_commands * sizeof(u64);
- h->reply_pool = pci_alloc_consistent(h->pdev, h->reply_pool_size,
- &(h->reply_pool_dhandle));
-
- /* Need a block fetch table for performant mode */
- h->blockFetchTable = kmalloc(((h->max_sg_entries+1) *
- sizeof(u32)), GFP_KERNEL);
-
- if ((h->reply_pool == NULL)
- || (h->blockFetchTable == NULL))
- goto clean_up;
h->reply_pool_wraparound = 1; /* spec: init to 1 */
memset(h->reply_pool, 0, h->reply_pool_size);
h->reply_pool_head = h->reply_pool;
- trans_offset = readl(&(h->cfgtable->TransMethodOffset));
bft[7] = h->max_sg_entries + 4;
calc_bucket_map(bft, ARRAY_SIZE(bft), 32, h->blockFetchTable);
for (i = 0; i < 8; i++)
writel(CFGTBL_Trans_Performant,
&(h->cfgtable->HostWrite.TransportRequest));
writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
- /* under certain very rare conditions, this can take awhile.
- * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
- * as we enter this code.) */
- for (l = 0; l < MAX_CONFIG_WAIT; l++) {
- register_value = readl(h->vaddr + SA5_DOORBELL);
- if (!(register_value & CFGTBL_ChangeReq))
- break;
- /* delay and try again */
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(10);
- }
+ hpsa_wait_for_mode_change_ack(h);
register_value = readl(&(h->cfgtable->TransportActive));
if (!(register_value & CFGTBL_Trans_Performant)) {
dev_warn(&h->pdev->dev, "unable to get board into"
" performant mode\n");
return;
}
+}
+
+static __devinit void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h)
+{
+ u32 trans_support;
+
+ trans_support = readl(&(h->cfgtable->TransportSupport));
+ if (!(trans_support & PERFORMANT_MODE))
+ return;
+
+ hpsa_get_max_perf_mode_cmds(h);
+ h->max_sg_entries = 32;
+ /* Performant mode ring buffer and supporting data structures */
+ h->reply_pool_size = h->max_commands * sizeof(u64);
+ h->reply_pool = pci_alloc_consistent(h->pdev, h->reply_pool_size,
+ &(h->reply_pool_dhandle));
+
+ /* Need a block fetch table for performant mode */
+ h->blockFetchTable = kmalloc(((h->max_sg_entries+1) *
+ sizeof(u32)), GFP_KERNEL);
+
+ if ((h->reply_pool == NULL)
+ || (h->blockFetchTable == NULL))
+ goto clean_up;
+
+ hpsa_enter_performant_mode(h);
/* Change the access methods to the performant access methods */
h->access = SA5_performant_access;