don't need this for those tiny 6-slot cdrom changers. Media
changers are listed as "Type: Medium Changer" in /proc/scsi/scsi.
If you have such hardware and want to use it with linux, say Y
- here. Check <file:Documentation/scsi-changer.txt> for details.
+ here. Check <file:Documentation/scsi/scsi-changer.txt> for details.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt> and
- <file:Documentation/scsi.txt>. The module will be called ch.o.
+ <file:Documentation/scsi/scsi.txt>. The module will be called ch.o.
If unsure, say N.
The userspace component needed to initialize the driver, documentation,
and sample configuration files can be found here:
- http://linux-iscsi.sf.net
+ http://open-iscsi.org
config SGIWD93_SCSI
tristate "SGI WD93C93 SCSI Driver"
- depends on SGI_IP22 && SCSI
+ depends on SGI_HAS_WD93 && SCSI
help
If you have a Western Digital WD93 SCSI controller on
an SGI MIPS system, say Y. Otherwise, say N.
config SCSI_7000FASST
tristate "7000FASST SCSI support"
depends on ISA && SCSI && ISA_DMA_API
+ select CHECK_SIGNATURE
help
This driver supports the Western Digital 7000 SCSI host adapter
family. Some information is in the source:
tristate "Adaptec AHA152X/2825 support"
depends on ISA && SCSI && !64BIT
select SCSI_SPI_ATTRS
+ select CHECK_SIGNATURE
---help---
This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
config SCSI_ADVANSYS
tristate "AdvanSys SCSI support"
- depends on SCSI
+ depends on SCSI && VIRT_TO_BUS
depends on ISA || EISA || PCI
- depends on BROKEN || X86_32
help
This is a driver for all SCSI host adapters manufactured by
AdvanSys. It is documented in the kernel source in
source "drivers/scsi/megaraid/Kconfig.megaraid"
config SCSI_HPTIOP
- tristate "HighPoint RocketRAID 3xxx Controller support"
+ tristate "HighPoint RocketRAID 3xxx/4xxx Controller support"
depends on SCSI && PCI
help
- This option enables support for HighPoint RocketRAID 3xxx
+ This option enables support for HighPoint RocketRAID 3xxx/4xxx
controllers.
To compile this driver as a module, choose M here; the module
tristate "DTC3180/3280 SCSI support"
depends on ISA && SCSI
select SCSI_SPI_ATTRS
+ select CHECK_SIGNATURE
help
This is support for DTC 3180/3280 SCSI Host Adapters. Please read
the SCSI-HOWTO, available from
config SCSI_FUTURE_DOMAIN
tristate "Future Domain 16xx SCSI/AHA-2920A support"
depends on (ISA || PCI) && SCSI
+ select CHECK_SIGNATURE
---help---
This is support for Future Domain's 16-bit SCSI host adapters
(TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and
config SCSI_GDTH
tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
- depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
+ depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API && PCI_LEGACY
---help---
Formerly called GDT SCSI Disk Array Controller Support.
This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI)
manufactured by Intel Corporation/ICP vortex GmbH. It is documented
in the kernel source in <file:drivers/scsi/gdth.c> and
- <file:drivers/scsi/gdth.h.>
+ <file:drivers/scsi/gdth.h>.
To compile this driver as a module, choose M here: the
module will be called gdth.
To compile this driver as a module, choose M here: the
module will be called pas16.
-config SCSI_PSI240I
- tristate "PSI240i support"
- depends on ISA && SCSI
- help
- This is support for the PSI240i EIDE interface card which acts as a
- SCSI host adapter. Please read the SCSI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here: the
- module will be called psi240i.
-
config SCSI_QLOGIC_FAS
tristate "Qlogic FAS SCSI support"
depends on ISA && SCSI
This lpfc driver supports the Emulex LightPulse
Family of Fibre Channel PCI host adapters.
-config SCSI_SEAGATE
- tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
- depends on X86 && ISA && SCSI
- ---help---
- These are 8-bit SCSI controllers; the ST-01 is also supported by
- this driver. It is explained in section 3.9 of the SCSI-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>. If it
- doesn't work out of the box, you may have to change some macros at
- compiletime, which are described in <file:drivers/scsi/seagate.c>.
-
- To compile this driver as a module, choose M here: the
- module will be called seagate.
-
-# definitely looks not 64bit safe:
config SCSI_SIM710
tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
depends on (EISA || MCA) && SCSI
tristate "Trantor T128/T128F/T228 SCSI support"
depends on ISA && SCSI
select SCSI_SPI_ATTRS
+ select CHECK_SIGNATURE
---help---
This is support for a SCSI host adapter. It is explained in section
3.11 of the SCSI-HOWTO, available from
built-in SCSI controller, say Y. Otherwise, say N.
To compile this driver as a module, choose M here: the
- module will be called wd33c93.
+ module will be called a3000.
config A2091_SCSI
tristate "A2091/A590 WD33C93A support"
say N.
To compile this driver as a module, choose M here: the
- module will be called wd33c93.
+ module will be called a2091.
config GVP11_SCSI
tristate "GVP Series II WD33C93A support"